summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2008-10-08 09:02:11 -0600
committerGrant Likely <grant.likely@secretlab.ca>2008-10-08 09:02:11 -0600
commita897ea13f7a801e6baba8d4985f459042712244c (patch)
tree580ce1aee753c3e1e7963e252beaf10ac8d87df6 /drivers/spi
parent7c12d906f4ef690c65e60111375856640f63a545 (diff)
downloadop-kernel-dev-a897ea13f7a801e6baba8d4985f459042712244c.zip
op-kernel-dev-a897ea13f7a801e6baba8d4985f459042712244c.tar.gz
powerpc/mpc5200: fix build warnings on mpc52xx_psc_spi driver
The register definitions have been changed for the mpc5200 PSC ports to cover some of the changes in the mpc5200b. One change is that the ccr register is now a u32 instead of a u16. However, for the purposes of this driver we want to continue to use 16 bit access to avoid changing the existing (working) behaviour. This patch allows the driver to continue to do 16 bit accesses without the compiler complaining about it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/mpc52xx_psc_spi.c6
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 25eda71..cdb3d31 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -108,13 +108,13 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
* Because psc->ccr is defined as 16bit register instead of 32bit
* just set the lower byte of BitClkDiv
*/
- ccr = in_be16(&psc->ccr);
+ ccr = in_be16((u16 __iomem *)&psc->ccr);
ccr &= 0xFF00;
if (cs->speed_hz)
ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
else /* by default SPI Clk 1MHz */
ccr |= (MCLK / 1000000 - 1) & 0xFF;
- out_be16(&psc->ccr, ccr);
+ out_be16((u16 __iomem *)&psc->ccr, ccr);
mps->bits_per_word = cs->bits_per_word;
if (mps->activate_cs)
@@ -347,7 +347,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
/* Configure 8bit codec mode as a SPI master and use EOF flags */
/* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
out_be32(&psc->sicr, 0x0180C800);
- out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+ out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */
/* Set 2ms DTL delay */
out_8(&psc->ctur, 0x00);
OpenPOWER on IntegriCloud