diff options
| author | Vitja Makarov <vitja.makarov@gmail.com> | 2009-04-06 19:00:31 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-04-07 08:31:04 -0700 |
| commit | 8cf5858c51f88208fe56b195251ab4f21265386c (patch) | |
| tree | 6095e2a5f9cb5d0b19afef30fd74bb360c4a42db /drivers/spi | |
| parent | 3bcfa9e47a7d1be6faef3be6c4b2049e585e2f38 (diff) | |
| download | op-kernel-dev-8cf5858c51f88208fe56b195251ab4f21265386c.zip op-kernel-dev-8cf5858c51f88208fe56b195251ab4f21265386c.tar.gz | |
Blackfin SPI Driver: ensure cache coherency before doing DMA
Flush or invalidate caches before doing DMA transfer, if needed.
[Mike Frysinger <vapier.adi@gmail.com>: add comment to address the
issue "Full duplex only works for non-DMA transfers".]
Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi_bfin5xx.c | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 3410b0c..e440718 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -26,6 +26,10 @@ #include <asm/portmux.h> #include <asm/bfin5xx_spi.h> +/* reserved_mem_dcache_on and cache friends */ +#include <asm/cplbinit.h> +#include <asm/cacheflush.h> + #define DRV_NAME "bfin-spi" #define DRV_AUTHOR "Bryan Wu, Luke Yang" #define DRV_DESC "Blackfin BF5xx on-chip SPI Controller Driver" @@ -738,9 +742,10 @@ static void pump_transfers(unsigned long data) width, transfer->len); /* - * Try to map dma buffer and do a dma transfer if - * successful use different way to r/w according to - * drv_data->cur_chip->enable_dma + * Try to map dma buffer and do a dma transfer. If successful use, + * different way to r/w according to the enable_dma settings and if + * we are not doing a full duplex transfer (since the hardware does + * not support full duplex DMA transfers). */ if (!full_duplex && drv_data->cur_chip->enable_dma && drv_data->len > 6) { @@ -795,6 +800,12 @@ static void pump_transfers(unsigned long data) /* set transfer mode, and enable SPI */ dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n"); + /* invalidate caches, if needed */ + if (bfin_addr_dcachable((unsigned long) drv_data->rx)) + invalidate_dcache_range((unsigned long) drv_data->rx, + (unsigned long) (drv_data->rx + + drv_data->len)); + /* clear tx reg soformer data is not shifted out */ write_TDBR(drv_data, 0xFFFF); @@ -815,6 +826,12 @@ static void pump_transfers(unsigned long data) } else if (drv_data->tx != NULL) { dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n"); + /* flush caches, if needed */ + if (bfin_addr_dcachable((unsigned long) drv_data->tx)) + flush_dcache_range((unsigned long) drv_data->tx, + (unsigned long) (drv_data->tx + + drv_data->len)); + /* start dma */ dma_enable_irq(drv_data->dma_channel); dma_config = (RESTART | dma_width | DI_EN); |
