summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorMika Westerberg <mika.westerberg@linux.intel.com>2013-01-22 12:26:31 +0200
committerMark Brown <broonie@opensource.wolfsonmicro.com>2013-02-08 12:15:36 +0000
commitb833172fd8f44fb56e0b3cb810155a6baecc65dc (patch)
treec3a23b30586ad61259e6438358c20b82df0ecbbc /drivers/spi
parent7d94a50585884180a487ce17e8ddbfa37f7694b6 (diff)
downloadop-kernel-dev-b833172fd8f44fb56e0b3cb810155a6baecc65dc.zip
op-kernel-dev-b833172fd8f44fb56e0b3cb810155a6baecc65dc.tar.gz
spi/pxa2xx: add support for SPI_LOOP
This is useful when testing the functionality of the controller from userspace and there aren't any real SPI slave devices connected to the bus. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-pxa2xx.c5
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 7f8f939..8a5ba0a 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -846,6 +846,9 @@ static int setup(struct spi_device *spi)
chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
+ if (spi->mode & SPI_LOOP)
+ chip->cr1 |= SSCR1_LBM;
+
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (!pxa25x_ssp_comp(drv_data))
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
@@ -939,7 +942,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
/* the spi->mode bits understood by this driver: */
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
master->bus_num = ssp->port_id;
master->num_chipselect = platform_info->num_chipselect;
OpenPOWER on IntegriCloud