summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-04-30 00:52:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-04-30 08:29:31 -0700
commit592e7bf80566bf5ac3ed073d4e198dd5b0824c04 (patch)
tree8e778b8c93a16b11085099214f729b3795fd19a9 /drivers/spi
parentc6495aaabfaa8256c292c54b48ab081f4d86ad79 (diff)
downloadop-kernel-dev-592e7bf80566bf5ac3ed073d4e198dd5b0824c04.zip
op-kernel-dev-592e7bf80566bf5ac3ed073d4e198dd5b0824c04.tar.gz
atmel_spi: clean up baud rate divisor calculation
Make the baud rate divisor calculation code a bit more readable and add a few comments. Also fix wrong debug information being displayed when !new_1 and max_speed_hz == 0. [david-b@pacbell.net: fix it] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: "Janesh Ramakrishnan" <jramakrishnan@neuropace.com> Acked-by David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/atmel_spi.c29
1 files changed, 20 insertions, 9 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 02c8e30..e81d59d 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -497,7 +497,7 @@ static int atmel_spi_setup(struct spi_device *spi)
struct atmel_spi *as;
u32 scbr, csr;
unsigned int bits = spi->bits_per_word;
- unsigned long bus_hz, sck_hz;
+ unsigned long bus_hz;
unsigned int npcs_pin;
int ret;
@@ -536,14 +536,25 @@ static int atmel_spi_setup(struct spi_device *spi)
return -EINVAL;
}
- /* speed zero convention is used by some upper layers */
+ /*
+ * Pre-new_1 chips start out at half the peripheral
+ * bus speed.
+ */
bus_hz = clk_get_rate(as->clk);
+ if (!as->new_1)
+ bus_hz /= 2;
+
if (spi->max_speed_hz) {
- /* assume div32/fdiv/mbz == 0 */
- if (!as->new_1)
- bus_hz /= 2;
- scbr = ((bus_hz + spi->max_speed_hz - 1)
- / spi->max_speed_hz);
+ /*
+ * Calculate the lowest divider that satisfies the
+ * constraint, assuming div32/fdiv/mbz == 0.
+ */
+ scbr = DIV_ROUND_UP(bus_hz, spi->max_speed_hz);
+
+ /*
+ * If the resulting divider doesn't fit into the
+ * register bitfield, we can't satisfy the constraint.
+ */
if (scbr >= (1 << SPI_SCBR_SIZE)) {
dev_dbg(&spi->dev,
"setup: %d Hz too slow, scbr %u; min %ld Hz\n",
@@ -551,8 +562,8 @@ static int atmel_spi_setup(struct spi_device *spi)
return -EINVAL;
}
} else
+ /* speed zero means "as slow as possible" */
scbr = 0xff;
- sck_hz = bus_hz / scbr;
csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8);
if (spi->mode & SPI_CPOL)
@@ -589,7 +600,7 @@ static int atmel_spi_setup(struct spi_device *spi)
dev_dbg(&spi->dev,
"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
- sck_hz, bits, spi->mode, spi->chip_select, csr);
+ bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
OpenPOWER on IntegriCloud