MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().

Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Cc: jonas.gorski@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3983/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 26 insertions, 5 deletions

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 6e25ef1..b7d61e7 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -47,6 +47,8 @@ struct bcm63xx_spi {
 	/* Platform data */
 	u32			speed_hz;
 	unsigned		fifo_size;
+	unsigned int		msg_type_shift;
+	unsigned int		msg_ctl_width;
 
 	/* Data buffers */
 	const unsigned char	*tx_ptr;
@@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
 	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
 
 	if (t->rx_buf && t->tx_buf)
-		msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
+		msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
 	else if (t->rx_buf)
-		msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
+		msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
 	else if (t->tx_buf)
-		msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-
-	bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+		msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
+
+	switch (bs->msg_ctl_width) {
+	case 8:
+		bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
+		break;
+	case 16:
+		bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+		break;
+	}
 
 	/* Issue the transfer */
 	cmd = SPI_CMD_START_IMMEDIATE;
@@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	master->mode_bits = MODEBITS;
 	bs->speed_hz = pdata->speed_hz;
+	bs->msg_type_shift = pdata->msg_type_shift;
+	bs->msg_ctl_width = pdata->msg_ctl_width;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
 
+	switch (bs->msg_ctl_width) {
+	case 8:
+	case 16:
+		break;
+	default:
+		dev_err(dev, "unsupported MSG_CTL width: %d\n",
+			 bs->msg_ctl_width);
+		goto out_clk_disable;
+	}
+
 	/* Initialize hardware */
 	clk_enable(bs->clk);
 	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);