summaryrefslogtreecommitdiffstats
path: root/drivers/spi/atmel_spi.c
diff options
context:
space:
mode:
authorStanislaw Gruszka <stf_xl@wp.pl>2009-01-15 13:50:44 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-01-15 16:39:35 -0800
commit5b96f1729064453e09805a387378e0644da1c937 (patch)
treee2ef80291f2ed0176e9d8330c0b698aae790ecd4 /drivers/spi/atmel_spi.c
parent1f14081d8b31b2780e2e6e2ae2766264e1f7d38b (diff)
downloadop-kernel-dev-5b96f1729064453e09805a387378e0644da1c937.zip
op-kernel-dev-5b96f1729064453e09805a387378e0644da1c937.tar.gz
atmel_spi: allow transfer when max_speed_hz = 0
For some reason I have to slowdown clock to touchscreen device. In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow as possible and divider is set to maximum value. But in atmel_spi_transfer() function is check against not zero max_speed_hz with EINVAL returned. Probably driver should setup divider for each transfer based on transfer->speed_hz value, but I think that would be not necessary overhead as all used devices have constant clock. Below patch works fine for me. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi/atmel_spi.c')
-rw-r--r--drivers/spi/atmel_spi.c3
1 files changed, 1 insertions, 2 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 5e39bac..56ff3e6 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -670,8 +670,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
dev_dbg(controller, "new message %p submitted for %s\n",
msg, spi->dev.bus_id);
- if (unlikely(list_empty(&msg->transfers)
- || !spi->max_speed_hz))
+ if (unlikely(list_empty(&msg->transfers)))
return -EINVAL;
if (as->stopping)
OpenPOWER on IntegriCloud