Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

22 files changed, 1664 insertions, 480 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index d935b2d..ae0251e 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -153,8 +153,6 @@ static int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
 	9600, 19200, 38400, 57600, 115200, 0 };
 
-#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0]))
-
 /* Sets or clears DTR/RTS on the requested line */
 static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
 {
@@ -1406,10 +1404,10 @@ static void m68328_set_baud(void)
 	USTCNT = ustcnt & ~USTCNT_TXEN;
 
 again:
-	for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
 		if (baud_table[i] == m68328_console_baud)
 			break;
-	if (i >= sizeof(baud_table) / sizeof(baud_table[0])) {
+	if (i >= ARRAY_SIZE(baud_table)) {
 		m68328_console_baud = 9600;
 		goto again;
 	}
@@ -1435,7 +1433,7 @@ int m68328_console_setup(struct console *cp, char *arg)
 	if (arg)
 		n = simple_strtoul(arg,NULL,0);
 
-	for (i = 0; i < BAUD_TABLE_SIZE; i++)
+	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
 		if (baud_table[i] == n)
 			break;
 	if (i < BAUD_TABLE_SIZE) {
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e9b15c3..7c4ebe6e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	}
 #endif
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
-	/* if access method is AU, it is a 16550 with a quirk */
-	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
-		up->bugs |= UART_BUG_NOMSR;
-#endif
-
 	serial_outp(up, UART_LCR, save_lcr);
 
 	if (up->capabilities != uart_config[up->port.type].flags) {
@@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
 static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
-		return 0x100000;
+		return 0x1000;
 #ifdef CONFIG_ARCH_OMAP
 	if (is_omap_port(pt))
 		return 0x16 << pt->port.regshift;
@@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	/* if access method is AU, it is a 16550 with a quirk */
+	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+		up->bugs |= UART_BUG_NOMSR;
+#endif
+
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
 
@@ -2689,6 +2690,15 @@ static void __init serial8250_isa_init_ports(void)
 	}
 }
 
+static void
+serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
+{
+	up->port.type = type;
+	up->port.fifosize = uart_config[type].fifo_size;
+	up->capabilities = uart_config[type].flags;
+	up->tx_loadsz = uart_config[type].tx_loadsz;
+}
+
 static void __init
 serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 {
@@ -2705,6 +2715,10 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 		struct uart_8250_port *up = &serial8250_ports[i];
 
 		up->port.dev = dev;
+
+		if (up->port.flags & UPF_FIXED_TYPE)
+			serial8250_init_fixed_type_port(up, up->port.type);
+
 		uart_add_one_port(drv, &up->port);
 	}
 }
@@ -3117,12 +3131,8 @@ int serial8250_register_port(struct uart_port *port)
 		if (port->dev)
 			uart->port.dev = port->dev;
 
-		if (port->flags & UPF_FIXED_TYPE) {
-			uart->port.type = port->type;
-			uart->port.fifosize = uart_config[port->type].fifo_size;
-			uart->capabilities = uart_config[port->type].flags;
-			uart->tx_loadsz = uart_config[port->type].tx_loadsz;
-		}
+		if (port->flags & UPF_FIXED_TYPE)
+			serial8250_init_fixed_type_port(uart, port->type);
 
 		set_io_from_upio(&uart->port);
 		/* Possibly override default I/O functions.  */
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index b28af13..01c012d 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev)
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
-	if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
+		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
 		return 0;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
@@ -1479,6 +1480,7 @@ enum pci_board_num_t {
 
 	pbn_b0_bt_1_115200,
 	pbn_b0_bt_2_115200,
+	pbn_b0_bt_4_115200,
 	pbn_b0_bt_8_115200,
 
 	pbn_b0_bt_1_460800,
@@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
+	[pbn_b0_bt_4_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
 	[pbn_b0_bt_8_115200] = {
 		.flags		= FL_BASE0|FL_BASE_BARS,
 		.num_ports	= 8,
@@ -3191,6 +3199,15 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0x1208, 0x0004, 0, 0,
 		pbn_b0_4_921600 },
 
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+		0x1204, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
+		0x1208, 0x0004, 0, 0,
+		pbn_b0_4_921600 },
 	/*
 	 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
 	 */
@@ -3649,6 +3666,18 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0, 0, pbn_b0_1_115200 },
 
 	/*
+	 * Best Connectivity PCI Multi I/O cards
+	 */
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x3004,
+		0, 0, pbn_b0_bt_4_115200 },
+
+	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
 	 */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5351848..f55c494 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1026,6 +1026,10 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_DMA
+	bool "DMA support"
+	depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
 	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
@@ -1103,12 +1107,12 @@ config SERIAL_68360
 	default y
 
 config SERIAL_PMACZILOG
-	tristate "PowerMac z85c30 ESCC support"
-	depends on PPC_OF && PPC_PMAC
+	tristate "Mac or PowerMac z85c30 ESCC support"
+	depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
 	select SERIAL_CORE
 	help
 	  This driver supports the Zilog z85C30 serial ports found on
-	  PowerMac machines.
+	  (Power)Mac machines.
 	  Say Y or M if you want to be able to these serial ports.
 
 config SERIAL_PMACZILOG_TTYS
@@ -1133,16 +1137,16 @@ config SERIAL_PMACZILOG_TTYS
 	  unable to use the 8250 module for PCMCIA or other 16C550-style
 	  UARTs.
 
-	  Say N unless you need the z85c30 ports on your powermac
+	  Say N unless you need the z85c30 ports on your (Power)Mac
 	  to appear as /dev/ttySn.
 
 config SERIAL_PMACZILOG_CONSOLE
-	bool "Console on PowerMac z85c30 serial port"
+	bool "Console on Mac or PowerMac z85c30 serial port"
 	depends on SERIAL_PMACZILOG=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you would like to be able to use the z85c30 serial port
-	  on your PowerMac as the console, you can do so by answering
+	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
 config SERIAL_LH7A40X
@@ -1435,42 +1439,37 @@ config SERIAL_BFIN_SPORT
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin_sport_uart.
 
-choice
-	prompt "Baud rate for Blackfin SPORT UART"
-	depends on SERIAL_BFIN_SPORT
-	default SERIAL_SPORT_BAUD_RATE_57600
-	help
-	  Choose a baud rate for the SPORT UART, other uart settings are
-	  8 bit, 1 stop bit, no parity, no flow control.
-
-config SERIAL_SPORT_BAUD_RATE_115200
-	bool "115200"
-
-config SERIAL_SPORT_BAUD_RATE_57600
-	bool "57600"
+config SERIAL_BFIN_SPORT_CONSOLE
+	bool "Console on Blackfin sport emulated uart"
+	depends on SERIAL_BFIN_SPORT=y
+	select SERIAL_CORE_CONSOLE
 
-config SERIAL_SPORT_BAUD_RATE_38400
-	bool "38400"
+config SERIAL_BFIN_SPORT0_UART
+	bool "Enable UART over SPORT0"
+	depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)
+	help
+	  Enable UART over SPORT0
 
-config SERIAL_SPORT_BAUD_RATE_19200
-	bool "19200"
+config SERIAL_BFIN_SPORT1_UART
+	bool "Enable UART over SPORT1"
+	depends on SERIAL_BFIN_SPORT
+	help
+	  Enable UART over SPORT1
 
-config SERIAL_SPORT_BAUD_RATE_9600
-	bool "9600"
-endchoice
+config SERIAL_BFIN_SPORT2_UART
+	bool "Enable UART over SPORT2"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT2
 
-config SPORT_BAUD_RATE
-	int
-	depends on SERIAL_BFIN_SPORT
-	default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
-	default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
-	default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
-	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
-	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_BFIN_SPORT3_UART
+	bool "Enable UART over SPORT3"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT3
 
 config SERIAL_TIMBERDALE
 	tristate "Support for timberdale UART"
-	depends on MFD_TIMBERDALE
 	select SERIAL_CORE
 	---help---
 	Add support for UART controller on timberdale.
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ef7adc8..ce6c353 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -71,6 +71,7 @@ struct uart_amba_port {
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
 	unsigned int		ifls;	/* vendor-specific */
+	bool			autorts;
 };
 
 /* There is by now at least one vendor with differing details, so handle it */
@@ -308,6 +309,11 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
 	TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
 	TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+
+	if (uap->autorts) {
+		/* We need to disable auto-RTS if we want to turn RTS off */
+		TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
+	}
 #undef TIOCMBIT
 
 	writew(cr, uap->port.membase + UART011_CR);
@@ -437,6 +443,7 @@ static void pl011_shutdown(struct uart_port *port)
 	/*
 	 * disable the port
 	 */
+	uap->autorts = false;
 	writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
 
 	/*
@@ -456,6 +463,7 @@ static void
 pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		     struct ktermios *old)
 {
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int lcr_h, old_cr;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -532,6 +540,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	old_cr = readw(port->membase + UART011_CR);
 	writew(0, port->membase + UART011_CR);
 
+	if (termios->c_cflag & CRTSCTS) {
+		if (old_cr & UART011_CR_RTS)
+			old_cr |= UART011_CR_RTSEN;
+
+		old_cr |= UART011_CR_CTSEN;
+		uap->autorts = true;
+	} else {
+		old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
+		uap->autorts = false;
+	}
+
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 9d948bc..2c9bf9b 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1213,6 +1213,24 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return ret;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int atmel_poll_get_char(struct uart_port *port)
+{
+	while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
+		cpu_relax();
+
+	return UART_GET_CHAR(port);
+}
+
+static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+	while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+		cpu_relax();
+
+	UART_PUT_CHAR(port, ch);
+}
+#endif
+
 static struct uart_ops atmel_pops = {
 	.tx_empty	= atmel_tx_empty,
 	.set_mctrl	= atmel_set_mctrl,
@@ -1232,6 +1250,10 @@ static struct uart_ops atmel_pops = {
 	.config_port	= atmel_config_port,
 	.verify_port	= atmel_verify_port,
 	.pm		= atmel_serial_pm,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= atmel_poll_get_char,
+	.poll_put_char	= atmel_poll_put_char,
+#endif
 };
 
 /*
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index 37ad0c4..a1a0e55 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -35,7 +35,7 @@
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
 
-#define BCM63XX_NR_UARTS	1
+#define BCM63XX_NR_UARTS	2
 
 static struct uart_port ports[BCM63XX_NR_UARTS];
 
@@ -784,7 +784,7 @@ static struct uart_driver bcm_uart_driver = {
 	.dev_name	= "ttyS",
 	.major		= TTY_MAJOR,
 	.minor		= 64,
-	.nr		= 1,
+	.nr		= BCM63XX_NR_UARTS,
 	.cons		= BCM63XX_CONSOLE,
 };
 
@@ -826,11 +826,12 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev)
 	port->dev = &pdev->dev;
 	port->fifosize = 16;
 	port->uartclk = clk_get_rate(clk) / 2;
+	port->line = pdev->id;
 	clk_put(clk);
 
 	ret = uart_add_one_port(&bcm_uart_driver, port);
 	if (ret) {
-		kfree(port);
+		ports[pdev->id].membase = 0;
 		return ret;
 	}
 	platform_set_drvdata(pdev, port);
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 50abb7e..fcf273e3 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
@@ -237,7 +238,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 
 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
 	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
-	if (kgdb_connected && kgdboc_port_line == uart->port.line)
+	if (kgdb_connected && kgdboc_port_line == uart->port.line
+		&& kgdboc_break_enabled)
 		if (ch == 0x3) {/* Ctrl + C */
 			kgdb_breakpoint();
 			return;
@@ -488,6 +490,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
 
+	dma_disable_irq(uart->tx_dma_channel);
 	dma_disable_irq(uart->rx_dma_channel);
 	spin_lock_bh(&uart->port.lock);
 
@@ -521,6 +524,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 	}
 
 	spin_unlock_bh(&uart->port.lock);
+	dma_enable_irq(uart->tx_dma_channel);
 	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
@@ -746,15 +750,6 @@ static int bfin_serial_startup(struct uart_port *port)
 			Status interrupt.\n");
 	}
 
-	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, DRIVER_NAME);
-		gpio_direction_output(uart->cts_pin, 1);
-	}
-	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, DRIVER_NAME);
-		gpio_direction_output(uart->rts_pin, 0);
-	}
-
 	/* CTS RTS PINs are negative assertive. */
 	UART_PUT_MCR(uart, ACTS);
 	UART_SET_IER(uart, EDSSI);
@@ -801,10 +796,6 @@ static void bfin_serial_shutdown(struct uart_port *port)
 		gpio_free(uart->rts_pin);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->cts_pin >= 0)
-		gpio_free(uart->cts_pin);
-	if (uart->rts_pin >= 0)
-		gpio_free(uart->rts_pin);
 	if (UART_GET_IER(uart) && EDSSI)
 		free_irq(uart->status_irq, uart);
 #endif
@@ -1409,8 +1400,7 @@ static int bfin_serial_remove(struct platform_device *dev)
 			continue;
 		uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
 		bfin_serial_ports[i].port.dev = NULL;
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(CONFIG_SERIAL_BFIN_CTSRTS)
 		gpio_free(bfin_serial_ports[i].cts_pin);
 		gpio_free(bfin_serial_ports[i].rts_pin);
 #endif
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 088bb35..7c72888 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -1,27 +1,11 @@
 /*
- * File:	linux/drivers/serial/bfin_sport_uart.c
+ * Blackfin On-Chip Sport Emulated UART Driver
  *
- * Based on:	drivers/serial/bfin_5xx.c by Aubrey Li.
- * Author:	Roy Huang <roy.huang@analog.com>
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Created:	Nov 22, 2006
- * Copyright:	(c) 2006-2007 Analog Devices Inc.
- * Description: this driver enable SPORTs on Blackfin emulate UART.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /*
@@ -29,39 +13,18 @@
  * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
  * This application note describe how to implement a UART on a Sharc DSP,
  * but this driver is implemented on Blackfin Processor.
+ * Transmit Frame Sync is not used by this driver to transfer data out.
  */
 
-/* After reset, there is a prelude of low level pulse when transmit data first
- * time. No addtional pulse in following transmit.
- * According to document:
- * The SPORTs are ready to start transmitting or receiving data no later than
- * three serial clock cycles after they are enabled in the SPORTx_TCR1 or
- * SPORTx_RCR1 register. No serial clock cycles are lost from this point on.
- * The first internal frame sync will occur one frame sync delay after the
- * SPORTs are ready. External frame syncs can occur as soon as the SPORT is
- * ready.
- */
+/* #define DEBUG */
 
-/* Thanks to Axel Alatalo <axel@rubico.se> for fixing sport rx bug. Sometimes
- * sport receives data incorrectly. The following is Axel's words.
- * As EE-191, sport rx samples 3 times of the UART baudrate and takes the
- * middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting,
- * 30 samples will be required for a byte. If transmitter sends a 1/3 bit short
- * byte due to buadrate drift, then the 30th sample of a byte, this sample is
- * also the third sample of the stop bit, will happens on the immediately
- * following start bit which will be thrown away and missed. Thus since parts
- * of the startbit will be missed and the receiver will begin to drift, the
- * effect accumulates over time until synchronization is lost.
- * If only require 2 samples of the stopbit (by sampling in total 29 samples),
- * then a to short byte as in the case above will be tolerated. Then the 1/3
- * early startbit will trigger a framesync since the last read is complete
- * after only 2/3 stopbit and framesync is active during the last 1/3 looking
- * for a possible early startbit. */
-
-//#define DEBUG
+#define DRV_NAME "bfin-sport-uart"
+#define DEVICE_NAME	"ttySS"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/io.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
@@ -75,23 +38,36 @@
 
 #include "bfin_sport_uart.h"
 
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 unsigned short bfin_uart_pin_req_sport0[] =
 	{P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
 	 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0};
-
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 unsigned short bfin_uart_pin_req_sport1[] =
 	{P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
 	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0};
-
-#define DRV_NAME "bfin-sport-uart"
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+unsigned short bfin_uart_pin_req_sport2[] =
+	{P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+unsigned short bfin_uart_pin_req_sport3[] =
+	{P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0};
+#endif
 
 struct sport_uart_port {
 	struct uart_port	port;
-	char			*name;
-
-	int			tx_irq;
-	int			rx_irq;
 	int			err_irq;
+	unsigned short		csize;
+	unsigned short		rxmask;
+	unsigned short		txmask1;
+	unsigned short		txmask2;
+	unsigned char		stopb;
+/*	unsigned char		parib; */
 };
 
 static void sport_uart_tx_chars(struct sport_uart_port *up);
@@ -99,36 +75,42 @@ static void sport_stop_tx(struct uart_port *port);
 
 static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 {
-	pr_debug("%s value:%x\n", __func__, value);
-	/* Place a Start and Stop bit */
+	pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value,
+		up->txmask1, up->txmask2);
+
+	/* Place Start and Stop bits */
 	__asm__ __volatile__ (
-		"R2 = b#01111111100;"
-		"R3 = b#10000000001;"
-		"%0 <<= 2;"
-		"%0 = %0 & R2;"
-		"%0 = %0 | R3;"
-		: "=d"(value)
-		: "d"(value)
-		: "ASTAT", "R2", "R3"
+		"%[val] <<= 1;"
+		"%[val] = %[val] & %[mask1];"
+		"%[val] = %[val] | %[mask2];"
+		: [val]"+d"(value)
+		: [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2)
+		: "ASTAT"
 	);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	SPORT_PUT_TX(up, value);
 }
 
-static inline unsigned int rx_one_byte(struct sport_uart_port *up)
+static inline unsigned char rx_one_byte(struct sport_uart_port *up)
 {
-	unsigned int value, extract;
+	unsigned int value;
+	unsigned char extract;
 	u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
 
-	value = SPORT_GET_RX32(up);
-	pr_debug("%s value:%x\n", __func__, value);
+	if ((up->csize + up->stopb) > 7)
+		value = SPORT_GET_RX32(up);
+	else
+		value = SPORT_GET_RX(up);
+
+	pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value,
+		up->csize, up->rxmask);
 
-	/* Extract 8 bits data */
+	/* Extract data */
 	__asm__ __volatile__ (
 		"%[extr] = 0;"
-		"%[mask1] = 0x1801(Z);"
-		"%[mask2] = 0x0300(Z);"
+		"%[mask1] = %[rxmask];"
+		"%[mask2] = 0x0200(Z);"
 		"%[shift] = 0;"
 		"LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
 		".Lloop_s:"
@@ -138,9 +120,9 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 		"%[mask1] = %[mask1] - %[mask2];"
 		".Lloop_e:"
 		"%[shift] += 1;"
-		: [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
-		  [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
-		: "d"(value), [lc]"a"(8)
+		: [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp),
+		  [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2)
+		: [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize)
 		: "ASTAT", "LB0", "LC0", "LT0"
 	);
 
@@ -148,29 +130,28 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 	return extract;
 }
 
-static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
+static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
 {
-	int tclkdiv, tfsdiv, rclkdiv;
+	int tclkdiv, rclkdiv;
+	unsigned int sclk = get_sclk();
 
-	/* Set TCR1 and TCR2 */
-	SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
-	SPORT_PUT_TCR2(up, 10);
+	/* Set TCR1 and TCR2, TFSR is not enabled for uart */
+	SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK));
+	SPORT_PUT_TCR2(up, size + 1);
 	pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
 	/* Set RCR1 and RCR2 */
 	SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
-	SPORT_PUT_RCR2(up, 28);
+	SPORT_PUT_RCR2(up, (size + 1) * 2 - 1);
 	pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
 
-	tclkdiv = sclk/(2 * baud_rate) - 1;
-	tfsdiv = 12;
-	rclkdiv = sclk/(2 * baud_rate * 3) - 1;
+	tclkdiv = sclk / (2 * baud_rate) - 1;
+	rclkdiv = sclk / (2 * baud_rate * 2) - 1;
 	SPORT_PUT_TCLKDIV(up, tclkdiv);
-	SPORT_PUT_TFSDIV(up, tfsdiv);
 	SPORT_PUT_RCLKDIV(up, rclkdiv);
 	SSYNC();
-	pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n",
-			__func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv);
+	pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n",
+			__func__, sclk, baud_rate, tclkdiv, rclkdiv);
 
 	return 0;
 }
@@ -181,23 +162,29 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
 	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch;
 
-	do {
+	spin_lock(&up->port.lock);
+
+	while (SPORT_GET_STAT(up) & RXNE) {
 		ch = rx_one_byte(up);
 		up->port.icount.rx++;
 
-		if (uart_handle_sysrq_char(&up->port, ch))
-			;
-		else
+		if (!uart_handle_sysrq_char(&up->port, ch))
 			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	} while (SPORT_GET_STAT(up) & RXNE);
+	}
 	tty_flip_buffer_push(tty);
 
+	spin_unlock(&up->port.lock);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
 {
-	sport_uart_tx_chars(dev_id);
+	struct sport_uart_port *up = dev_id;
+
+	spin_lock(&up->port.lock);
+	sport_uart_tx_chars(up);
+	spin_unlock(&up->port.lock);
 
 	return IRQ_HANDLED;
 }
@@ -208,6 +195,8 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int stat = SPORT_GET_STAT(up);
 
+	spin_lock(&up->port.lock);
+
 	/* Overflow in RX FIFO */
 	if (stat & ROVF) {
 		up->port.icount.overrun++;
@@ -216,15 +205,16 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 	}
 	/* These should not happen */
 	if (stat & (TOVF | TUVF | RUVF)) {
-		printk(KERN_ERR "SPORT Error:%s %s %s\n",
-				(stat & TOVF)?"TX overflow":"",
-				(stat & TUVF)?"TX underflow":"",
-				(stat & RUVF)?"RX underflow":"");
+		pr_err("SPORT Error:%s %s %s\n",
+		       (stat & TOVF) ? "TX overflow" : "",
+		       (stat & TUVF) ? "TX underflow" : "",
+		       (stat & RUVF) ? "RX underflow" : "");
 		SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
 		SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
 	}
 	SSYNC();
 
+	spin_unlock(&up->port.lock);
 	return IRQ_HANDLED;
 }
 
@@ -232,60 +222,37 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 static int sport_startup(struct uart_port *port)
 {
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
-	char buffer[20];
-	int retval;
+	int ret;
 
 	pr_debug("%s enter\n", __func__);
-	snprintf(buffer, 20, "%s rx", up->name);
-	retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
-	if (retval) {
-		printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
-		return retval;
+	ret = request_irq(up->port.irq, sport_uart_rx_irq, 0,
+		"SPORT_UART_RX", up);
+	if (ret) {
+		dev_err(port->dev, "unable to request SPORT RX interrupt\n");
+		return ret;
 	}
 
-	snprintf(buffer, 20, "%s tx", up->name);
-	retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
-	if (retval) {
-		printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
+	ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0,
+		"SPORT_UART_TX", up);
+	if (ret) {
+		dev_err(port->dev, "unable to request SPORT TX interrupt\n");
 		goto fail1;
 	}
 
-	snprintf(buffer, 20, "%s err", up->name);
-	retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up);
-	if (retval) {
-		printk(KERN_ERR "Unable to request interrupt %s\n", buffer);
+	ret = request_irq(up->err_irq, sport_uart_err_irq, 0,
+		"SPORT_UART_STATUS", up);
+	if (ret) {
+		dev_err(port->dev, "unable to request SPORT status interrupt\n");
 		goto fail2;
 	}
 
-	if (port->line) {
-		if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME))
-			goto fail3;
-	} else {
-		if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME))
-			goto fail3;
-	}
-
-	sport_uart_setup(up, get_sclk(), port->uartclk);
-
-	/* Enable receive interrupt */
-	SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN));
-	SSYNC();
-
 	return 0;
+ fail2:
+	free_irq(up->port.irq+1, up);
+ fail1:
+	free_irq(up->port.irq, up);
 
-
-fail3:
-	printk(KERN_ERR DRV_NAME
-		": Requesting Peripherals failed\n");
-
-	free_irq(up->err_irq, up);
-fail2:
-	free_irq(up->tx_irq, up);
-fail1:
-	free_irq(up->rx_irq, up);
-
-	return retval;
-
+	return ret;
 }
 
 static void sport_uart_tx_chars(struct sport_uart_port *up)
@@ -344,20 +311,17 @@ static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static void sport_stop_tx(struct uart_port *port)
 {
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
-	unsigned int stat;
 
 	pr_debug("%s enter\n", __func__);
 
-	stat = SPORT_GET_STAT(up);
-	while(!(stat & TXHRE)) {
-		udelay(1);
-		stat = SPORT_GET_STAT(up);
-	}
 	/* Although the hold register is empty, last byte is still in shift
-	 * register and not sent out yet. If baud rate is lower than default,
-	 * delay should be longer. For example, if the baud rate is 9600,
-	 * the delay must be at least 2ms by experience */
-	udelay(500);
+	 * register and not sent out yet. So, put a dummy data into TX FIFO.
+	 * Then, sport tx stops when last byte is shift out and the dummy
+	 * data is moved into the shift register.
+	 */
+	SPORT_PUT_TX(up, 0xffff);
+	while (!(SPORT_GET_STAT(up) & TXHRE))
+		cpu_relax();
 
 	SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
 	SSYNC();
@@ -370,6 +334,7 @@ static void sport_start_tx(struct uart_port *port)
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
 
 	pr_debug("%s enter\n", __func__);
+
 	/* Write data into SPORT FIFO before enable SPROT to transmit */
 	sport_uart_tx_chars(up);
 
@@ -403,37 +368,24 @@ static void sport_shutdown(struct uart_port *port)
 {
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
 
-	pr_debug("%s enter\n", __func__);
+	dev_dbg(port->dev, "%s enter\n", __func__);
 
 	/* Disable sport */
 	SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
 	SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
 	SSYNC();
 
-	if (port->line) {
-		peripheral_free_list(bfin_uart_pin_req_sport1);
-	} else {
-		peripheral_free_list(bfin_uart_pin_req_sport0);
-	}
-
-	free_irq(up->rx_irq, up);
-	free_irq(up->tx_irq, up);
+	free_irq(up->port.irq, up);
+	free_irq(up->port.irq+1, up);
 	free_irq(up->err_irq, up);
 }
 
-static void sport_set_termios(struct uart_port *port,
-		struct ktermios *termios, struct ktermios *old)
-{
-	pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
-	uart_update_timeout(port, CS8 ,port->uartclk);
-}
-
 static const char *sport_type(struct uart_port *port)
 {
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
 
 	pr_debug("%s enter\n", __func__);
-	return up->name;
+	return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL;
 }
 
 static void sport_release_port(struct uart_port *port)
@@ -461,6 +413,110 @@ static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return 0;
 }
 
+static void sport_set_termios(struct uart_port *port,
+		struct ktermios *termios, struct ktermios *old)
+{
+	struct sport_uart_port *up = (struct sport_uart_port *)port;
+	unsigned long flags;
+	int i;
+
+	pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS8:
+		up->csize = 8;
+		break;
+	case CS7:
+		up->csize = 7;
+		break;
+	case CS6:
+		up->csize = 6;
+		break;
+	case CS5:
+		up->csize = 5;
+		break;
+	default:
+		pr_warning("requested word length not supported\n");
+	}
+
+	if (termios->c_cflag & CSTOPB) {
+		up->stopb = 1;
+	}
+	if (termios->c_cflag & PARENB) {
+		pr_warning("PAREN bits is not supported yet\n");
+		/* up->parib = 1; */
+	}
+
+	port->read_status_mask = OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= (FE | PE);
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= BI;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= FE | PE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= OE;
+	}
+
+	/* RX extract mask */
+	up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
+	/* TX masks, 8 bit data and 1 bit stop for example:
+	 * mask1 = b#0111111110
+	 * mask2 = b#1000000000
+	 */
+	for (i = 0, up->txmask1 = 0; i < up->csize; i++)
+		up->txmask1 |= (1<<i);
+	up->txmask2 = (1<<i);
+	if (up->stopb) {
+		++i;
+		up->txmask2 |= (1<<i);
+	}
+	up->txmask1 <<= 1;
+	up->txmask2 <<= 1;
+	/* uart baud rate */
+	port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	/* Disable UART */
+	SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
+	SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
+
+	sport_uart_setup(up, up->csize + up->stopb, port->uartclk);
+
+	/* driver TX line high after config, one dummy data is
+	 * necessary to stop sport after shift one byte
+	 */
+	SPORT_PUT_TX(up, 0xffff);
+	SPORT_PUT_TX(up, 0xffff);
+	SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+	SSYNC();
+	while (!(SPORT_GET_STAT(up) & TXHRE))
+		cpu_relax();
+	SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
+	SSYNC();
+
+	/* Port speed changed, update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, port->uartclk);
+
+	/* Enable sport rx */
+	SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN);
+	SSYNC();
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
 struct uart_ops sport_uart_ops = {
 	.tx_empty	= sport_tx_empty,
 	.set_mctrl	= sport_set_mctrl,
@@ -480,138 +536,319 @@ struct uart_ops sport_uart_ops = {
 	.verify_port	= sport_verify_port,
 };
 
-static struct sport_uart_port sport_uart_ports[] = {
-	{ /* SPORT 0 */
-		.name	= "SPORT0",
-		.tx_irq = IRQ_SPORT0_TX,
-		.rx_irq = IRQ_SPORT0_RX,
-		.err_irq= IRQ_SPORT0_ERROR,
-		.port	= {
-			.type		= PORT_BFIN_SPORT,
-			.iotype		= UPIO_MEM,
-			.membase	= (void __iomem *)SPORT0_TCR1,
-			.mapbase	= SPORT0_TCR1,
-			.irq		= IRQ_SPORT0_RX,
-			.uartclk	= CONFIG_SPORT_BAUD_RATE,
-			.fifosize	= 8,
-			.ops		= &sport_uart_ops,
-			.line		= 0,
-		},
-	}, { /* SPORT 1 */
-		.name	= "SPORT1",
-		.tx_irq = IRQ_SPORT1_TX,
-		.rx_irq = IRQ_SPORT1_RX,
-		.err_irq= IRQ_SPORT1_ERROR,
-		.port	= {
-			.type		= PORT_BFIN_SPORT,
-			.iotype		= UPIO_MEM,
-			.membase	= (void __iomem *)SPORT1_TCR1,
-			.mapbase	= SPORT1_TCR1,
-			.irq		= IRQ_SPORT1_RX,
-			.uartclk	= CONFIG_SPORT_BAUD_RATE,
-			.fifosize	= 8,
-			.ops		= &sport_uart_ops,
-			.line		= 1,
-		},
+#define BFIN_SPORT_UART_MAX_PORTS 4
+
+static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+static int __init
+sport_uart_console_setup(struct console *co, char *options)
+{
+	struct sport_uart_port *up;
+	int baud = 57600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/* Check whether an invalid uart number has been specified */
+	if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS)
+		return -ENODEV;
+
+	up = bfin_sport_uart_ports[co->index];
+	if (!up)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static void sport_uart_console_putchar(struct uart_port *port, int ch)
+{
+	struct sport_uart_port *up = (struct sport_uart_port *)port;
+
+	while (SPORT_GET_STAT(up) & TXF)
+		barrier();
+
+	tx_one_byte(up, ch);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+sport_uart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct sport_uart_port *up = bfin_sport_uart_ports[co->index];
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	if (SPORT_GET_TCR1(up) & TSPEN)
+		uart_console_write(&up->port, s, count, sport_uart_console_putchar);
+	else {
+		/* dummy data to start sport */
+		while (SPORT_GET_STAT(up) & TXF)
+			barrier();
+		SPORT_PUT_TX(up, 0xffff);
+		/* Enable transmit, then an interrupt will generated */
+		SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+		SSYNC();
+
+		uart_console_write(&up->port, s, count, sport_uart_console_putchar);
+
+		/* Although the hold register is empty, last byte is still in shift
+		 * register and not sent out yet. So, put a dummy data into TX FIFO.
+		 * Then, sport tx stops when last byte is shift out and the dummy
+		 * data is moved into the shift register.
+		 */
+		while (SPORT_GET_STAT(up) & TXF)
+			barrier();
+		SPORT_PUT_TX(up, 0xffff);
+		while (!(SPORT_GET_STAT(up) & TXHRE))
+			barrier();
+
+		/* Stop sport tx transfer */
+		SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
+		SSYNC();
 	}
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static struct uart_driver sport_uart_reg;
+
+static struct console sport_uart_console = {
+	.name		= DEVICE_NAME,
+	.write		= sport_uart_console_write,
+	.device		= uart_console_device,
+	.setup		= sport_uart_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &sport_uart_reg,
 };
 
+#define SPORT_UART_CONSOLE	(&sport_uart_console)
+#else
+#define SPORT_UART_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */
+
+
 static struct uart_driver sport_uart_reg = {
 	.owner		= THIS_MODULE,
-	.driver_name	= "SPORT-UART",
-	.dev_name	= "ttySS",
+	.driver_name	= DRV_NAME,
+	.dev_name	= DEVICE_NAME,
 	.major		= 204,
 	.minor		= 84,
-	.nr		= ARRAY_SIZE(sport_uart_ports),
-	.cons		= NULL,
+	.nr		= BFIN_SPORT_UART_MAX_PORTS,
+	.cons		= SPORT_UART_CONSOLE,
 };
 
-static int sport_uart_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int sport_uart_suspend(struct device *dev)
 {
-	struct sport_uart_port *sport = platform_get_drvdata(dev);
+	struct sport_uart_port *sport = dev_get_drvdata(dev);
 
-	pr_debug("%s enter\n", __func__);
+	dev_dbg(dev, "%s enter\n", __func__);
 	if (sport)
 		uart_suspend_port(&sport_uart_reg, &sport->port);
 
 	return 0;
 }
 
-static int sport_uart_resume(struct platform_device *dev)
+static int sport_uart_resume(struct device *dev)
 {
-	struct sport_uart_port *sport = platform_get_drvdata(dev);
+	struct sport_uart_port *sport = dev_get_drvdata(dev);
 
-	pr_debug("%s enter\n", __func__);
+	dev_dbg(dev, "%s enter\n", __func__);
 	if (sport)
 		uart_resume_port(&sport_uart_reg, &sport->port);
 
 	return 0;
 }
 
-static int sport_uart_probe(struct platform_device *dev)
+static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = {
+	.suspend	= sport_uart_suspend,
+	.resume		= sport_uart_resume,
+};
+#endif
+
+static int __devinit sport_uart_probe(struct platform_device *pdev)
 {
-	pr_debug("%s enter\n", __func__);
-	sport_uart_ports[dev->id].port.dev = &dev->dev;
-	uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port);
-	platform_set_drvdata(dev, &sport_uart_ports[dev->id]);
+	struct resource *res;
+	struct sport_uart_port *sport;
+	int ret = 0;
 
-	return 0;
+	dev_dbg(&pdev->dev, "%s enter\n", __func__);
+
+	if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) {
+		dev_err(&pdev->dev, "Wrong sport uart platform device id.\n");
+		return -ENOENT;
+	}
+
+	if (bfin_sport_uart_ports[pdev->id] == NULL) {
+		bfin_sport_uart_ports[pdev->id] =
+			kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
+		sport = bfin_sport_uart_ports[pdev->id];
+		if (!sport) {
+			dev_err(&pdev->dev,
+				"Fail to kmalloc sport_uart_port\n");
+			return -ENOMEM;
+		}
+
+		ret = peripheral_request_list(
+			(unsigned short *)pdev->dev.platform_data, DRV_NAME);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Fail to request SPORT peripherals\n");
+			goto out_error_free_mem;
+		}
+
+		spin_lock_init(&sport->port.lock);
+		sport->port.fifosize  = SPORT_TX_FIFO_SIZE,
+		sport->port.ops       = &sport_uart_ops;
+		sport->port.line      = pdev->id;
+		sport->port.iotype    = UPIO_MEM;
+		sport->port.flags     = UPF_BOOT_AUTOCONF;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (res == NULL) {
+			dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+			ret = -ENOENT;
+			goto out_error_free_peripherals;
+		}
+
+		sport->port.membase = ioremap(res->start,
+			res->end - res->start);
+		if (!sport->port.membase) {
+			dev_err(&pdev->dev, "Cannot map sport IO\n");
+			ret = -ENXIO;
+			goto out_error_free_peripherals;
+		}
+
+		sport->port.irq = platform_get_irq(pdev, 0);
+		if (sport->port.irq < 0) {
+			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
+			ret = -ENOENT;
+			goto out_error_unmap;
+		}
+
+		sport->err_irq = platform_get_irq(pdev, 1);
+		if (sport->err_irq < 0) {
+			dev_err(&pdev->dev, "No sport status IRQ specified\n");
+			ret = -ENOENT;
+			goto out_error_unmap;
+		}
+	}
+
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+	if (!is_early_platform_device(pdev)) {
+#endif
+		sport = bfin_sport_uart_ports[pdev->id];
+		sport->port.dev = &pdev->dev;
+		dev_set_drvdata(&pdev->dev, sport);
+		ret = uart_add_one_port(&sport_uart_reg, &sport->port);
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+	}
+#endif
+	if (!ret)
+		return 0;
+
+	if (sport) {
+out_error_unmap:
+		iounmap(sport->port.membase);
+out_error_free_peripherals:
+		peripheral_free_list(
+			(unsigned short *)pdev->dev.platform_data);
+out_error_free_mem:
+		kfree(sport);
+		bfin_sport_uart_ports[pdev->id] = NULL;
+	}
+
+	return ret;
 }
 
-static int sport_uart_remove(struct platform_device *dev)
+static int __devexit sport_uart_remove(struct platform_device *pdev)
 {
-	struct sport_uart_port *sport = platform_get_drvdata(dev);
+	struct sport_uart_port *sport = platform_get_drvdata(pdev);
 
-	pr_debug("%s enter\n", __func__);
-	platform_set_drvdata(dev, NULL);
+	dev_dbg(&pdev->dev, "%s enter\n", __func__);
+	dev_set_drvdata(&pdev->dev, NULL);
 
-	if (sport)
+	if (sport) {
 		uart_remove_one_port(&sport_uart_reg, &sport->port);
+		iounmap(sport->port.membase);
+		peripheral_free_list(
+			(unsigned short *)pdev->dev.platform_data);
+		kfree(sport);
+		bfin_sport_uart_ports[pdev->id] = NULL;
+	}
 
 	return 0;
 }
 
 static struct platform_driver sport_uart_driver = {
 	.probe		= sport_uart_probe,
-	.remove		= sport_uart_remove,
-	.suspend	= sport_uart_suspend,
-	.resume		= sport_uart_resume,
+	.remove		= __devexit_p(sport_uart_remove),
 	.driver		= {
 		.name	= DRV_NAME,
+#ifdef CONFIG_PM
+		.pm	= &bfin_sport_uart_dev_pm_ops,
+#endif
 	},
 };
 
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+static __initdata struct early_platform_driver early_sport_uart_driver = {
+	.class_str = DRV_NAME,
+	.pdrv = &sport_uart_driver,
+	.requested_id = EARLY_PLATFORM_ID_UNSET,
+};
+
+static int __init sport_uart_rs_console_init(void)
+{
+	early_platform_driver_register(&early_sport_uart_driver, DRV_NAME);
+
+	early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0);
+
+	register_console(&sport_uart_console);
+
+	return 0;
+}
+console_initcall(sport_uart_rs_console_init);
+#endif
+
 static int __init sport_uart_init(void)
 {
 	int ret;
 
-	pr_debug("%s enter\n", __func__);
+	pr_info("Serial: Blackfin uart over sport driver\n");
+
 	ret = uart_register_driver(&sport_uart_reg);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to register %s:%d\n",
+	if (ret) {
+		pr_err("failed to register %s:%d\n",
 				sport_uart_reg.driver_name, ret);
 		return ret;
 	}
 
 	ret = platform_driver_register(&sport_uart_driver);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret);
+	if (ret) {
+		pr_err("failed to register sport uart driver:%d\n", ret);
 		uart_unregister_driver(&sport_uart_reg);
 	}
 
-
-	pr_debug("%s exit\n", __func__);
 	return ret;
 }
+module_init(sport_uart_init);
 
 static void __exit sport_uart_exit(void)
 {
-	pr_debug("%s enter\n", __func__);
 	platform_driver_unregister(&sport_uart_driver);
 	uart_unregister_driver(&sport_uart_reg);
 }
-
-module_init(sport_uart_init);
 module_exit(sport_uart_exit);
 
+MODULE_AUTHOR("Sonic Zhang, Roy Huang");
+MODULE_DESCRIPTION("Blackfin serial over SPORT driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index 671d41c..abe0361 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -1,29 +1,23 @@
 /*
- * File:	linux/drivers/serial/bfin_sport_uart.h
+ * Blackfin On-Chip Sport Emulated UART Driver
  *
- * Based on:	include/asm-blackfin/mach-533/bfin_serial_5xx.h
- * Author:	Roy Huang <roy.huang>analog.com>
+ * Copyright 2006-2008 Analog Devices Inc.
  *
- * Created:	Nov 22, 2006
- * Copyright:	(C) Analog Device Inc.
- * Description: this driver enable SPORTs on Blackfin emulate UART.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
+/*
+ * This driver and the hardware supported are in term of EE-191 of ADI.
+ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * This application note describe how to implement a UART on a Sharc DSP,
+ * but this driver is implemented on Blackfin Processor.
+ * Transmit Frame Sync is not used by this driver to transfer data out.
+ */
+
+#ifndef _BFIN_SPORT_UART_H
+#define _BFIN_SPORT_UART_H
 
 #define OFFSET_TCR1		0x00	/* Transmit Configuration 1 Register */
 #define OFFSET_TCR2		0x04	/* Transmit Configuration 2 Register */
@@ -61,3 +55,7 @@
 #define SPORT_PUT_RCLKDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
 #define SPORT_PUT_RFSDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
 #define SPORT_PUT_STAT(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
+
+#define SPORT_TX_FIFO_SIZE	8
+
+#endif /* _BFIN_SPORT_UART_H */
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 0028b6f..53a4682 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -751,7 +751,6 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 		trace(icom_port, "FID_STATUS", status);
 		count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
 
-                count = tty_buffer_request_room(tty, count);
 		trace(icom_port, "RCV_COUNT", count);
 
 		trace(icom_port, "REAL_COUNT", count);
@@ -1654,4 +1653,6 @@ MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
 MODULE_SUPPORTED_DEVICE
     ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters");
 MODULE_LICENSE("GPL");
-
+MODULE_FIRMWARE("icom_call_setup.bin");
+MODULE_FIRMWARE("icom_res_dce.bin");
+MODULE_FIRMWARE("icom_asc.bin");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index b801f5a..e579d7a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1279,7 +1279,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		sport->use_irda = 1;
 #endif
 
-	if (pdata->init) {
+	if (pdata && pdata->init) {
 		ret = pdata->init(pdev);
 		if (ret)
 			goto clkput;
@@ -1292,7 +1292,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 
 	return 0;
 deinit:
-	if (pdata->exit)
+	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 clkput:
 	clk_put(sport->clk);
@@ -1321,7 +1321,7 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	clk_disable(sport->clk);
 
-	if (pdata->exit)
+	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 
 	iounmap(sport->port.membase);
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 85dc041..23ba6b4 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -1411,8 +1411,7 @@ static int receive_chars(struct uart_port *the_port)
 	read_count = do_read(the_port, ch, MAX_CHARS);
 	if (read_count > 0) {
 		flip = 1;
-		read_room = tty_buffer_request_room(tty, read_count);
-		tty_insert_flip_string(tty, ch, read_room);
+		read_room = tty_insert_flip_string(tty, ch, read_count);
 		the_port->icount.rx += read_count;
 	}
 	spin_unlock_irqrestore(&the_port->lock, pflags);
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 108c3e0..12cb5e4 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -179,6 +179,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 
 	return 0;
  out_free_irq:
+	jsm_remove_uart_port(brd);
 	free_irq(brd->irq, brd);
  out_iounmap:
 	iounmap(brd->re_map_membase);
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index cd95e21..5673ca9 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -432,7 +432,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 
 int jsm_uart_port_init(struct jsm_board *brd)
 {
-	int i;
+	int i, rc;
 	unsigned int line;
 	struct jsm_channel *ch;
 
@@ -467,8 +467,11 @@ int jsm_uart_port_init(struct jsm_board *brd)
 		} else
 			set_bit(line, linemap);
 		brd->channels[i]->uart_port.line = line;
-		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
-			printk(KERN_INFO "jsm: add device failed\n");
+		rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port);
+		if (rc){
+			printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i);
+			return rc;
+		}
 		else
 			printk(KERN_INFO "jsm: Port %d added\n", i);
 	}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7ce9e9f..3119fdd 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -74,6 +74,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/clk.h>
 
 #include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
@@ -113,6 +114,7 @@ static void mpc52xx_uart_of_enumerate(void);
 
 /* Forward declaration of the interruption handling routine */
 static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
+static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
 
 
 /* Simple macro to test if a port is console or not. This one is taken
@@ -145,6 +147,11 @@ struct psc_ops {
 	void		(*cw_disable_ints)(struct uart_port *port);
 	void		(*cw_restore_ints)(struct uart_port *port);
 	unsigned long	(*getuartclk)(void *p);
+	int		(*clock)(struct uart_port *port, int enable);
+	int		(*fifoc_init)(void);
+	void		(*fifoc_uninit)(void);
+	void		(*get_irq)(struct uart_port *, struct device_node *);
+	irqreturn_t	(*handle_irq)(struct uart_port *port);
 };
 
 #ifdef CONFIG_PPC_MPC52xx
@@ -256,6 +263,18 @@ static unsigned long mpc52xx_getuartclk(void *p)
 	return mpc5xxx_get_bus_frequency(p) / 2;
 }
 
+static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+	port->irqflags = IRQF_DISABLED;
+	port->irq = irq_of_parse_and_map(np, 0);
+}
+
+/* 52xx specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port)
+{
+	return mpc5xxx_uart_process_int(port);
+}
+
 static struct psc_ops mpc52xx_psc_ops = {
 	.fifo_init = mpc52xx_psc_fifo_init,
 	.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
@@ -273,14 +292,32 @@ static struct psc_ops mpc52xx_psc_ops = {
 	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
 	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
 	.getuartclk = mpc52xx_getuartclk,
+	.get_irq = mpc52xx_psc_get_irq,
+	.handle_irq = mpc52xx_psc_handle_irq,
 };
 
 #endif /* CONFIG_MPC52xx */
 
 #ifdef CONFIG_PPC_MPC512x
 #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
+
+/* PSC FIFO Controller for mpc512x */
+struct psc_fifoc {
+	u32 fifoc_cmd;
+	u32 fifoc_int;
+	u32 fifoc_dma;
+	u32 fifoc_axe;
+	u32 fifoc_debug;
+};
+
+static struct psc_fifoc __iomem *psc_fifoc;
+static unsigned int psc_fifoc_irq;
+
 static void mpc512x_psc_fifo_init(struct uart_port *port)
 {
+	/* /32 prescaler */
+	out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00);
+
 	out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
 	out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
 	out_be32(&FIFO_512x(port)->txalarm, 1);
@@ -393,6 +430,160 @@ static unsigned long mpc512x_getuartclk(void *p)
 	return mpc5xxx_get_bus_frequency(p);
 }
 
+#define DEFAULT_FIFO_SIZE 16
+
+static unsigned int __init get_fifo_size(struct device_node *np,
+					 char *fifo_name)
+{
+	const unsigned int *fp;
+
+	fp = of_get_property(np, fifo_name, NULL);
+	if (fp)
+		return *fp;
+
+	pr_warning("no %s property in %s node, defaulting to %d\n",
+		   fifo_name, np->full_name, DEFAULT_FIFO_SIZE);
+
+	return DEFAULT_FIFO_SIZE;
+}
+
+#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
+		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
+
+/* Init PSC FIFO Controller */
+static int __init mpc512x_psc_fifoc_init(void)
+{
+	struct device_node *np;
+	void __iomem *psc;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
+	int fifobase = 0; /* current fifo address in 32 bit words */
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "fsl,mpc5121-psc-fifo");
+	if (!np) {
+		pr_err("%s: Can't find FIFOC node\n", __func__);
+		return -ENODEV;
+	}
+
+	psc_fifoc = of_iomap(np, 0);
+	if (!psc_fifoc) {
+		pr_err("%s: Can't map FIFOC\n", __func__);
+		return -ENODEV;
+	}
+
+	psc_fifoc_irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if (psc_fifoc_irq == NO_IRQ) {
+		pr_err("%s: Can't get FIFOC irq\n", __func__);
+		iounmap(psc_fifoc);
+		return -ENODEV;
+	}
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") {
+		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
+		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
+
+		/* size in register is in 4 byte units */
+		tx_fifo_size /= 4;
+		rx_fifo_size /= 4;
+		if (!tx_fifo_size)
+			tx_fifo_size = 1;
+		if (!rx_fifo_size)
+			rx_fifo_size = 1;
+
+		psc = of_iomap(np, 0);
+		if (!psc) {
+			pr_err("%s: Can't map %s device\n",
+				__func__, np->full_name);
+			continue;
+		}
+
+		/* FIFO space is 4KiB, check if requested size is available */
+		if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
+			pr_err("%s: no fifo space available for %s\n",
+				__func__, np->full_name);
+			iounmap(psc);
+			/*
+			 * chances are that another device requests less
+			 * fifo space, so we continue.
+			 */
+			continue;
+		}
+		/* set tx and rx fifo size registers */
+		out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
+		fifobase += tx_fifo_size;
+		out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
+		fifobase += rx_fifo_size;
+
+		/* reset and enable the slices */
+		out_be32(&FIFOC(psc)->txcmd, 0x80);
+		out_be32(&FIFOC(psc)->txcmd, 0x01);
+		out_be32(&FIFOC(psc)->rxcmd, 0x80);
+		out_be32(&FIFOC(psc)->rxcmd, 0x01);
+
+		iounmap(psc);
+	}
+
+	return 0;
+}
+
+static void __exit mpc512x_psc_fifoc_uninit(void)
+{
+	iounmap(psc_fifoc);
+}
+
+/* 512x specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port)
+{
+	unsigned long fifoc_int;
+	int psc_num;
+
+	/* Read pending PSC FIFOC interrupts */
+	fifoc_int = in_be32(&psc_fifoc->fifoc_int);
+
+	/* Check if it is an interrupt for this port */
+	psc_num = (port->mapbase & 0xf00) >> 8;
+	if (test_bit(psc_num, &fifoc_int) ||
+	    test_bit(psc_num + 16, &fifoc_int))
+		return mpc5xxx_uart_process_int(port);
+
+	return IRQ_NONE;
+}
+
+static int mpc512x_psc_clock(struct uart_port *port, int enable)
+{
+	struct clk *psc_clk;
+	int psc_num;
+	char clk_name[10];
+
+	if (uart_console(port))
+		return 0;
+
+	psc_num = (port->mapbase & 0xf00) >> 8;
+	snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+	psc_clk = clk_get(port->dev, clk_name);
+	if (IS_ERR(psc_clk)) {
+		dev_err(port->dev, "Failed to get PSC clock entry!\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis");
+
+	if (enable)
+		clk_enable(psc_clk);
+	else
+		clk_disable(psc_clk);
+
+	return 0;
+}
+
+static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+	port->irqflags = IRQF_SHARED;
+	port->irq = psc_fifoc_irq;
+}
+
 static struct psc_ops mpc512x_psc_ops = {
 	.fifo_init = mpc512x_psc_fifo_init,
 	.raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
@@ -410,6 +601,11 @@ static struct psc_ops mpc512x_psc_ops = {
 	.cw_disable_ints = mpc512x_psc_cw_disable_ints,
 	.cw_restore_ints = mpc512x_psc_cw_restore_ints,
 	.getuartclk = mpc512x_getuartclk,
+	.clock = mpc512x_psc_clock,
+	.fifoc_init = mpc512x_psc_fifoc_init,
+	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
+	.get_irq = mpc512x_psc_get_irq,
+	.handle_irq = mpc512x_psc_handle_irq,
 };
 #endif
 
@@ -519,10 +715,15 @@ mpc52xx_uart_startup(struct uart_port *port)
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	int ret;
 
+	if (psc_ops->clock) {
+		ret = psc_ops->clock(port, 1);
+		if (ret)
+			return ret;
+	}
+
 	/* Request IRQ */
 	ret = request_irq(port->irq, mpc52xx_uart_int,
-		IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-		"mpc52xx_psc_uart", port);
+			  port->irqflags, "mpc52xx_psc_uart", port);
 	if (ret)
 		return ret;
 
@@ -553,6 +754,9 @@ mpc52xx_uart_shutdown(struct uart_port *port)
 	port->read_status_mask = 0;
 	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
 
+	if (psc_ops->clock)
+		psc_ops->clock(port, 0);
+
 	/* Release interrupt */
 	free_irq(port->irq, port);
 }
@@ -851,15 +1055,12 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
 }
 
 static irqreturn_t
-mpc52xx_uart_int(int irq, void *dev_id)
+mpc5xxx_uart_process_int(struct uart_port *port)
 {
-	struct uart_port *port = dev_id;
 	unsigned long pass = ISR_PASS_LIMIT;
 	unsigned int keepgoing;
 	u8 status;
 
-	spin_lock(&port->lock);
-
 	/* While we have stuff to do, we continue */
 	do {
 		/* If we don't find anything to do, we stop */
@@ -886,11 +1087,23 @@ mpc52xx_uart_int(int irq, void *dev_id)
 
 	} while (keepgoing);
 
-	spin_unlock(&port->lock);
-
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t
+mpc52xx_uart_int(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	irqreturn_t ret;
+
+	spin_lock(&port->lock);
+
+	ret = psc_ops->handle_irq(port);
+
+	spin_unlock(&port->lock);
+
+	return ret;
+}
 
 /* ======================================================================== */
 /* Console ( if applicable )                                                */
@@ -1152,7 +1365,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 		return -EINVAL;
 	}
 
-	port->irq = irq_of_parse_and_map(op->node, 0);
+	psc_ops->get_irq(port, op->node);
 	if (port->irq == NO_IRQ) {
 		dev_dbg(&op->dev, "Could not get irq\n");
 		return -EINVAL;
@@ -1163,10 +1376,8 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	/* Add the port to the uart sub-system */
 	ret = uart_add_one_port(&mpc52xx_uart_driver, port);
-	if (ret) {
-		irq_dispose_mapping(port->irq);
+	if (ret)
 		return ret;
-	}
 
 	dev_set_drvdata(&op->dev, (void *)port);
 	return 0;
@@ -1178,10 +1389,8 @@ mpc52xx_uart_of_remove(struct of_device *op)
 	struct uart_port *port = dev_get_drvdata(&op->dev);
 	dev_set_drvdata(&op->dev, NULL);
 
-	if (port) {
+	if (port)
 		uart_remove_one_port(&mpc52xx_uart_driver, port);
-		irq_dispose_mapping(port->irq);
-	}
 
 	return 0;
 }
@@ -1288,6 +1497,15 @@ mpc52xx_uart_init(void)
 
 	mpc52xx_uart_of_enumerate();
 
+	/*
+	 * Map the PSC FIFO Controller and init if on MPC512x.
+	 */
+	if (psc_ops->fifoc_init) {
+		ret = psc_ops->fifoc_init();
+		if (ret)
+			return ret;
+	}
+
 	ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
 	if (ret) {
 		printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
@@ -1302,6 +1520,9 @@ mpc52xx_uart_init(void)
 static void __exit
 mpc52xx_uart_exit(void)
 {
+	if (psc_ops->fifoc_uninit)
+		psc_ops->fifoc_uninit();
+
 	of_unregister_platform_driver(&mpc52xx_uart_of_driver);
 	uart_unregister_driver(&mpc52xx_uart_driver);
 }
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index b05c5aa..ecdc0fa 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -691,6 +691,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	struct msm_port *msm_port;
 	struct resource *resource;
 	struct uart_port *port;
+	int irq;
 
 	if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
 		return -ENXIO;
@@ -711,9 +712,10 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 		return -ENXIO;
 	port->mapbase = resource->start;
 
-	port->irq = platform_get_irq(pdev, 0);
-	if (unlikely(port->irq < 0))
+	irq = platform_get_irq(pdev, 0);
+	if (unlikely(irq < 0))
 		return -ENXIO;
+	port->irq = irq;
 
 	platform_set_drvdata(pdev, port);
 
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f..f020de1 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -63,11 +63,17 @@
 #include <asm/sections.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #include <asm/dbdma.h>
 #include <asm/macio.h>
+#else
+#include <linux/platform_device.h>
+#define of_machine_is_compatible(x) (0)
+#endif
 
 #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -83,11 +89,9 @@
 
 static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
 MODULE_LICENSE("GPL");
 
-#define PWRDBG(fmt, arg...)	printk(KERN_DEBUG fmt , ## arg)
-
 #ifdef CONFIG_SERIAL_PMACZILOG_TTYS
 #define PMACZILOG_MAJOR		TTY_MAJOR
 #define PMACZILOG_MINOR		64
@@ -153,8 +157,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
 	write_zsreg(uap, R10, regs[R10]);
 
 	/* Set TX/RX controls sans the enable bits.  */
-       	write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
-       	write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
+	write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
+	write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
 
 	/* now set R7 "prime" on ESCC */
 	write_zsreg(uap, R15, regs[R15] | EN85C30);
@@ -205,7 +209,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
  */
 static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
 {
-       	if (!ZS_REGS_HELD(uap)) {
+	if (!ZS_REGS_HELD(uap)) {
 		if (ZS_TX_ACTIVE(uap)) {
 			uap->flags |= PMACZILOG_FLAG_REGS_HELD;
 		} else {
@@ -281,7 +285,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 			spin_lock(&uap->port.lock);
 			if (swallow)
 				goto next_char;
- 		}
+		}
 #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
 
 		/* A real serial line, record the character and status.  */
@@ -317,7 +321,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 
 		if (uap->port.ignore_status_mask == 0xff ||
 		    (r1 & uap->port.ignore_status_mask) == 0) {
-		    	tty_insert_flip_char(tty, ch, flag);
+			tty_insert_flip_char(tty, ch, flag);
 		}
 		if (r1 & Rx_OVR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 	uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
 	write_zsreg(uap, R1, uap->curregs[R1]);
 	zssync(uap);
-	dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+	pmz_error("pmz: rx irq flood !\n");
 	return tty;
 }
 
@@ -470,47 +474,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
 
 	uap_a = pmz_get_port_A(uap);
 	uap_b = uap_a->mate;
-       
-       	spin_lock(&uap_a->port.lock);
+
+	spin_lock(&uap_a->port.lock);
 	r3 = read_zsreg(uap_a, R3);
 
 #ifdef DEBUG_HARD
 	pmz_debug("irq, r3: %x\n", r3);
 #endif
-       	/* Channel A */
+	/* Channel A */
 	tty = NULL;
-       	if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+	if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
 		write_zsreg(uap_a, R0, RES_H_IUS);
 		zssync(uap_a);		
-       		if (r3 & CHAEXT)
-       			pmz_status_handle(uap_a);
+		if (r3 & CHAEXT)
+			pmz_status_handle(uap_a);
 		if (r3 & CHARxIP)
 			tty = pmz_receive_chars(uap_a);
-       		if (r3 & CHATxIP)
-       			pmz_transmit_chars(uap_a);
-	        rc = IRQ_HANDLED;
-       	}
-       	spin_unlock(&uap_a->port.lock);
+		if (r3 & CHATxIP)
+			pmz_transmit_chars(uap_a);
+		rc = IRQ_HANDLED;
+	}
+	spin_unlock(&uap_a->port.lock);
 	if (tty != NULL)
 		tty_flip_buffer_push(tty);
 
 	if (uap_b->node == NULL)
 		goto out;
 
-       	spin_lock(&uap_b->port.lock);
+	spin_lock(&uap_b->port.lock);
 	tty = NULL;
 	if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
 		write_zsreg(uap_b, R0, RES_H_IUS);
 		zssync(uap_b);
-       		if (r3 & CHBEXT)
-       			pmz_status_handle(uap_b);
-       	       	if (r3 & CHBRxIP)
-       			tty = pmz_receive_chars(uap_b);
-       		if (r3 & CHBTxIP)
-       			pmz_transmit_chars(uap_b);
-	       	rc = IRQ_HANDLED;
-       	}
-       	spin_unlock(&uap_b->port.lock);
+		if (r3 & CHBEXT)
+			pmz_status_handle(uap_b);
+		if (r3 & CHBRxIP)
+			tty = pmz_receive_chars(uap_b);
+		if (r3 & CHBTxIP)
+			pmz_transmit_chars(uap_b);
+		rc = IRQ_HANDLED;
+	}
+	spin_unlock(&uap_b->port.lock);
 	if (tty != NULL)
 		tty_flip_buffer_push(tty);
 
@@ -718,7 +722,7 @@ static void pmz_enable_ms(struct uart_port *port)
 
 		if (ZS_IS_ASLEEP(uap))
 			return;
-		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		/* NOTE: Not subject to 'transmitter active' rule. */
 		write_zsreg(uap, R15, uap->curregs[R15]);
 	}
 }
@@ -748,7 +752,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
 	if (new_reg != uap->curregs[R5]) {
 		uap->curregs[R5] = new_reg;
 
-		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		/* NOTE: Not subject to 'transmitter active' rule. */
 		if (ZS_IS_ASLEEP(uap))
 			return;
 		write_zsreg(uap, R5, uap->curregs[R5]);
@@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+#ifdef CONFIG_PPC_PMAC
+
 /*
  * Turn power on or off to the SCC and associated stuff
  * (port drivers, modem, IR port, etc.)
@@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
 	return delay;
 }
 
+#else
+
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
 /*
  * FixZeroBug....Works around a bug in the SCC receving channel.
  * Inspired from Darwin code, 15 Sept. 2000  -DanM
@@ -908,7 +923,6 @@ static int __pmz_startup(struct uart_pmac_port *uap)
 	/* Remember status for DCD/CTS changes */
 	uap->prev_status = read_zsreg(uap, R0);
 
-
 	return pwr_delay;
 }
 
@@ -955,9 +969,9 @@ static int pmz_startup(struct uart_port *port)
 	}	
 
 	pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
-	if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
-		dev_err(&uap->dev->ofdev.dev,
-			"Unable to register zs interrupt handler.\n");
+	if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
+			"SCC", uap)) {
+		pmz_error("Unable to register zs interrupt handler.\n");
 		pmz_set_scc_power(uap, 0);
 		mutex_unlock(&pmz_irq_mutex);
 		return -ENXIO;
@@ -983,7 +997,7 @@ static int pmz_startup(struct uart_port *port)
 	if (!ZS_IS_EXTCLK(uap))
 		uap->curregs[R1] |= EXT_INT_ENAB;
 	write_zsreg(uap, R1, uap->curregs[R1]);
-       	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	pmz_debug("pmz: startup() done.\n");
 
@@ -1003,7 +1017,7 @@ static void pmz_shutdown(struct uart_port *port)
 	mutex_lock(&pmz_irq_mutex);
 
 	/* Release interrupt handler */
-       	free_irq(uap->port.irq, uap);
+	free_irq(uap->port.irq, uap);
 
 	spin_lock_irqsave(&port->lock, flags);
 
@@ -1051,7 +1065,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
 {
 	int brg;
 
-
 	/* Switch to external clocking for IrDA high clock rates. That
 	 * code could be re-used for Midi interfaces with different
 	 * multipliers
@@ -1198,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
 	while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
 	       || (read_zsreg(uap, R1) & ALL_SNT) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+			pmz_error("transmitter didn't drain\n");
 			return;
 		}
 		udelay(10);
@@ -1214,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
 		read_zsdata(uap);
 		mdelay(10);
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+			pmz_error("receiver didn't drain\n");
 			return;
 		}
 	}
@@ -1223,20 +1236,19 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
 	uap->curregs[R5] |= DTR;
 	write_zsreg(uap, R5, uap->curregs[R5]);
 	zssync(uap);
-       	mdelay(1);
+	mdelay(1);
 
 	/* Switch SCC to 19200 */
 	pmz_convert_to_zs(uap, CS8, 0, 19200);		
 	pmz_load_zsregs(uap, uap->curregs);
-       	mdelay(1);
+	mdelay(1);
 
 	/* Write get_version command byte */
 	write_zsdata(uap, 1);
 	t = 5000;
 	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev,
-				"irda_setup timed out on get_version byte\n");
+			pmz_error("irda_setup timed out on get_version byte\n");
 			goto out;
 		}
 		udelay(10);
@@ -1244,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
 	version = read_zsdata(uap);
 
 	if (version < 4) {
-		dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
-			 version);
+		pmz_info("IrDA: dongle version %d not supported\n", version);
 		goto out;
 	}
 
@@ -1254,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
 	t = 5000;
 	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev,
-				"irda_setup timed out on speed mode byte\n");
+			pmz_error("irda_setup timed out on speed mode byte\n");
 			goto out;
 		}
 		udelay(10);
 	}
 	t = read_zsdata(uap);
 	if (t != cmdbyte)
-		dev_err(&uap->dev->ofdev.dev,
-			"irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+		pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
 
-	dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
+	pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
 		 *baud, version);
 
 	(void)read_zsdata(uap);
@@ -1415,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
 	write_zsdata(uap, c);
 }
 
-#endif
+#endif /* CONFIG_CONSOLE_POLL */
 
 static struct uart_ops pmz_pops = {
 	.tx_empty	=	pmz_tx_empty,
@@ -1440,6 +1449,8 @@ static struct uart_ops pmz_pops = {
 #endif
 };
 
+#ifdef CONFIG_PPC_PMAC
+
 /*
  * Setup one port structure after probing, HW is down at this point,
  * Unlike sunzilog, we don't need to pre-init the spinlock as we don't
@@ -1463,7 +1474,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
 		return -ENODEV;
 	uap->port.mapbase = r_ports.start;
 	uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
-      
+
 	uap->control_reg = uap->port.membase;
 	uap->data_reg = uap->control_reg + 0x10;
 	
@@ -1590,7 +1601,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
 }
 
 /*
- * Called upon match with an escc node in the devive-tree.
+ * Called upon match with an escc node in the device-tree.
  */
 static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
 {
@@ -1812,7 +1823,7 @@ static int __init pmz_probe(void)
 		pmz_ports[count].node		= node_a;
 		pmz_ports[count+1].node		= node_b;
 		pmz_ports[count].port.line	= count;
-		pmz_ports[count+1].port.line   	= count+1;
+		pmz_ports[count+1].port.line	= count+1;
 
 		/*
 		 * Setup the ports for real
@@ -1836,6 +1847,88 @@ next:
 	return 0;
 }
 
+#else
+
+extern struct platform_device scc_a_pdev, scc_b_pdev;
+
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+	struct resource *r_ports;
+	int irq;
+
+	r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(uap->node, 0);
+	if (!r_ports || !irq)
+		return -ENODEV;
+
+	uap->port.mapbase  = r_ports->start;
+	uap->port.membase  = (unsigned char __iomem *) r_ports->start;
+	uap->port.iotype   = UPIO_MEM;
+	uap->port.irq      = irq;
+	uap->port.uartclk  = ZS_CLOCK;
+	uap->port.fifosize = 1;
+	uap->port.ops      = &pmz_pops;
+	uap->port.type     = PORT_PMAC_ZILOG;
+	uap->port.flags    = 0;
+
+	uap->control_reg   = uap->port.membase;
+	uap->data_reg      = uap->control_reg + 4;
+	uap->port_type     = 0;
+
+	pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+	return 0;
+}
+
+static int __init pmz_probe(void)
+{
+	int err;
+
+	pmz_ports_count = 0;
+
+	pmz_ports[0].mate      = &pmz_ports[1];
+	pmz_ports[0].port.line = 0;
+	pmz_ports[0].flags     = PMACZILOG_FLAG_IS_CHANNEL_A;
+	pmz_ports[0].node      = &scc_a_pdev;
+	err = pmz_init_port(&pmz_ports[0]);
+	if (err)
+		return err;
+	pmz_ports_count++;
+
+	pmz_ports[1].mate      = &pmz_ports[0];
+	pmz_ports[1].port.line = 1;
+	pmz_ports[1].flags     = 0;
+	pmz_ports[1].node      = &scc_b_pdev;
+	err = pmz_init_port(&pmz_ports[1]);
+	if (err)
+		return err;
+	pmz_ports_count++;
+
+	return 0;
+}
+
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+	memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+static int __init pmz_attach(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < pmz_ports_count; i++)
+		if (pmz_ports[i].node == pdev)
+			return 0;
+	return -ENODEV;
+}
+
+static int __exit pmz_detach(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
 
 static void pmz_console_write(struct console *con, const char *s, unsigned int count);
@@ -1896,28 +1989,41 @@ err_out:
 	return rc;
 }
 
+#ifdef CONFIG_PPC_PMAC
+
 static struct of_device_id pmz_match[] = 
 {
 	{
-	.name 		= "ch-a",
+	.name		= "ch-a",
 	},
 	{
-	.name 		= "ch-b",
+	.name		= "ch-b",
 	},
 	{},
 };
 MODULE_DEVICE_TABLE (of, pmz_match);
 
-static struct macio_driver pmz_driver = 
-{
+static struct macio_driver pmz_driver = {
 	.name 		= "pmac_zilog",
 	.match_table	= pmz_match,
 	.probe		= pmz_attach,
 	.remove		= pmz_detach,
 	.suspend	= pmz_suspend,
-       	.resume		= pmz_resume,
+	.resume		= pmz_resume,
 };
 
+#else
+
+static struct platform_driver pmz_driver = {
+	.remove		= __exit_p(pmz_detach),
+	.driver		= {
+		.name		= "scc",
+		.owner		= THIS_MODULE,
+	},
+};
+
+#endif /* !CONFIG_PPC_PMAC */
+
 static int __init init_pmz(void)
 {
 	int rc, i;
@@ -1952,19 +2058,27 @@ static int __init init_pmz(void)
 			pmz_dispose_port(&pmz_ports[i]);
 		return rc;
 	}
-	
+
 	/*
 	 * Then we register the macio driver itself
 	 */
+#ifdef CONFIG_PPC_PMAC
 	return macio_register_driver(&pmz_driver);
+#else
+	return platform_driver_probe(&pmz_driver, pmz_attach);
+#endif
 }
 
 static void __exit exit_pmz(void)
 {
 	int i;
 
+#ifdef CONFIG_PPC_PMAC
 	/* Get rid of macio-driver (detach from macio) */
 	macio_unregister_driver(&pmz_driver);
+#else
+	platform_driver_unregister(&pmz_driver);
+#endif
 
 	for (i = 0; i < pmz_ports_count; i++) {
 		struct uart_pmac_port *uport = &pmz_ports[i];
@@ -2031,10 +2145,10 @@ static int __init pmz_console_setup(struct console *co, char *options)
 	/*
 	 * XServe's default to 57600 bps
 	 */
-	if (machine_is_compatible("RackMac1,1")
-	    || machine_is_compatible("RackMac1,2")
-	    || machine_is_compatible("MacRISC4"))
-	 	baud = 57600;
+	if (of_machine_is_compatible("RackMac1,1")
+	    || of_machine_is_compatible("RackMac1,2")
+	    || of_machine_is_compatible("MacRISC4"))
+		baud = 57600;
 
 	/*
 	 * Check whether an invalid uart number has been specified, and
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
index f6e77f1..cbc34fb 100644
--- a/drivers/serial/pmac_zilog.h
+++ b/drivers/serial/pmac_zilog.h
@@ -1,7 +1,15 @@
 #ifndef __PMAC_ZILOG_H__
 #define __PMAC_ZILOG_H__
 
-#define pmz_debug(fmt,arg...)	dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+#ifdef CONFIG_PPC_PMAC
+#define pmz_debug(fmt, arg...)	dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_error(fmt, arg...)	dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_info(fmt, arg...)	dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
+#else
+#define pmz_debug(fmt, arg...)	dev_dbg(&uap->node->dev, fmt, ## arg)
+#define pmz_error(fmt, arg...)	dev_err(&uap->node->dev, fmt, ## arg)
+#define pmz_info(fmt, arg...)	dev_info(&uap->node->dev, fmt, ## arg)
+#endif
 
 /*
  * At most 2 ESCCs with 2 ports each
@@ -17,6 +25,7 @@ struct uart_pmac_port {
 	struct uart_port		port;
 	struct uart_pmac_port		*mate;
 
+#ifdef CONFIG_PPC_PMAC
 	/* macio_dev for the escc holding this port (maybe be null on
 	 * early inited port)
 	 */
@@ -25,6 +34,9 @@ struct uart_pmac_port {
 	 * of "escc" node (ie. ch-a or ch-b)
 	 */
 	struct device_node		*node;
+#else
+	struct platform_device		*node;
+#endif
 
 	/* Port type as obtained from device tree (IRDA, modem, ...) */
 	int				port_type;
@@ -55,10 +67,12 @@ struct uart_pmac_port {
 	volatile u8			__iomem *control_reg;
 	volatile u8			__iomem *data_reg;
 
+#ifdef CONFIG_PPC_PMAC
 	unsigned int			tx_dma_irq;
 	unsigned int			rx_dma_irq;
 	volatile struct dbdma_regs	__iomem *tx_dma_regs;
 	volatile struct dbdma_regs	__iomem *rx_dma_regs;
+#endif
 
 	struct ktermios			termios_cache;
 };
@@ -113,7 +127,7 @@ static inline void zssync(struct uart_pmac_port *port)
 #define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
 #define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
 
-#define ZS_CLOCK         3686400 	/* Z8530 RTxC input clock rate */
+#define ZS_CLOCK         3686400	/* Z8530 RTxC input clock rate */
 
 /* The Zilog register set */
 
@@ -171,7 +185,7 @@ static inline void zssync(struct uart_pmac_port *port)
 
 /* Write Register 3 */
 
-#define	RxENABLE       	0x1	/* Rx Enable */
+#define	RxENABLE	0x1	/* Rx Enable */
 #define	SYNC_L_INH	0x2	/* Sync Character Load Inhibit */
 #define	ADD_SM		0x4	/* Address Search Mode (SDLC) */
 #define	RxCRC_ENAB	0x8	/* Rx CRC Enable */
@@ -185,7 +199,7 @@ static inline void zssync(struct uart_pmac_port *port)
 
 /* Write Register 4 */
 
-#define	PAR_ENAB       	0x1	/* Parity Enable */
+#define	PAR_ENAB	0x1	/* Parity Enable */
 #define	PAR_EVEN	0x2	/* Parity Even/Odd* */
 
 #define	SYNC_ENAB	0	/* Sync Modes Enable */
@@ -210,7 +224,7 @@ static inline void zssync(struct uart_pmac_port *port)
 #define	TxCRC_ENAB	0x1	/* Tx CRC Enable */
 #define	RTS		0x2	/* RTS */
 #define	SDLC_CRC	0x4	/* SDLC/CRC-16 */
-#define	TxENABLE       	0x8	/* Tx Enable */
+#define	TxENABLE	0x8	/* Tx Enable */
 #define	SND_BRK		0x10	/* Send Break */
 #define	Tx5		0x0	/* Tx 5 bits (or less)/character */
 #define	Tx7		0x20	/* Tx 7 bits/character */
@@ -372,11 +386,11 @@ static inline void zssync(struct uart_pmac_port *port)
 #define ZS_TX_ACTIVE(UP)		((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
 #define ZS_WANTS_MODEM_STATUS(UP)	((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
 #define ZS_IS_IRDA(UP)			((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
-#define ZS_IS_INTMODEM(UP)	       	((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
+#define ZS_IS_INTMODEM(UP)		((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
 #define ZS_HAS_DMA(UP)			((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP)       		((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
-#define ZS_IS_OPEN(UP)       		((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP)       		((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
-#define ZS_IS_EXTCLK(UP)       		((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
+#define ZS_IS_ASLEEP(UP)		((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
+#define ZS_IS_OPEN(UP)			((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
+#define ZS_IS_IRQ_ON(UP)		((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
+#define ZS_IS_EXTCLK(UP)		((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
 
 #endif /* __PMAC_ZILOG_H__ */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 95421fa..e91db4b 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -696,11 +696,11 @@ static int serial_config(struct pcmcia_device * link)
 		info->multi = info->quirk->multi;
 
 	if (info->multi > 1)
-		multi_config(link);
+		i = multi_config(link);
 	else
-		simple_config(link);
+		i = simple_config(link);
 
-	if (info->ndev == 0)
+	if (i || info->ndev == 0)
 		goto failed;
 
 	/*
@@ -715,6 +715,7 @@ static int serial_config(struct pcmcia_device * link)
 	return 0;
 
 failed:
+	dev_warn(&link->dev, "serial_cs: failed to initialize\n");
 	serial_remove(link);
 	return -ENODEV;
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 42f3333..980f394 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -48,6 +48,9 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/list.h>
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/timer.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -84,6 +87,27 @@ struct sci_port {
 	struct clk		*dclk;
 
 	struct list_head	node;
+	struct dma_chan			*chan_tx;
+	struct dma_chan			*chan_rx;
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct device			*dma_dev;
+	enum sh_dmae_slave_chan_id	slave_tx;
+	enum sh_dmae_slave_chan_id	slave_rx;
+	struct dma_async_tx_descriptor	*desc_tx;
+	struct dma_async_tx_descriptor	*desc_rx[2];
+	dma_cookie_t			cookie_tx;
+	dma_cookie_t			cookie_rx[2];
+	dma_cookie_t			active_rx;
+	struct scatterlist		sg_tx;
+	unsigned int			sg_len_tx;
+	struct scatterlist		sg_rx[2];
+	size_t				buf_len_rx;
+	struct sh_dmae_slave		param_tx;
+	struct sh_dmae_slave		param_rx;
+	struct work_struct		work_tx;
+	struct work_struct		work_rx;
+	struct timer_list		rx_timer;
+#endif
 };
 
 struct sh_sci_priv {
@@ -269,29 +293,44 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785) || \
     defined(CONFIG_CPU_SUBTYPE_SH7786)
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
 {
-	return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
+	return sci_in(port, SCTFDR) & 0xff;
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_txroom(struct uart_port *port)
+{
+	return SCIF_TXROOM_MAX - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
 {
 	return sci_in(port, SCRFDR) & 0xff;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
 {
-	if ((port->mapbase == 0xffe00000) ||
-	    (port->mapbase == 0xffe08000)) {
+	if (port->mapbase == 0xffe00000 ||
+	    port->mapbase == 0xffe08000)
 		/* SCIF0/1*/
-		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
-	} else {
+		return sci_in(port, SCTFDR) & 0xff;
+	else
 		/* SCIF2 */
-		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
-	}
+		return sci_in(port, SCFDR) >> 8;
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_txroom(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000 ||
+	    port->mapbase == 0xffe08000)
+		/* SCIF0/1*/
+		return SCIF_TXROOM_MAX - scif_txfill(port);
+	else
+		/* SCIF2 */
+		return SCIF2_TXROOM_MAX - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
 {
 	if ((port->mapbase == 0xffe00000) ||
 	    (port->mapbase == 0xffe08000)) {
@@ -303,23 +342,33 @@ static inline int scif_rxroom(struct uart_port *port)
 	}
 }
 #else
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
+{
+	return sci_in(port, SCFDR) >> 8;
+}
+
+static int scif_txroom(struct uart_port *port)
 {
-	return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+	return SCIF_TXROOM_MAX - scif_txfill(port);
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_rxfill(struct uart_port *port)
 {
 	return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
 }
 #endif
 
-static inline int sci_txroom(struct uart_port *port)
+static int sci_txfill(struct uart_port *port)
 {
-	return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
+	return !(sci_in(port, SCxSR) & SCI_TDRE);
 }
 
-static inline int sci_rxroom(struct uart_port *port)
+static int sci_txroom(struct uart_port *port)
+{
+	return !sci_txfill(port);
+}
+
+static int sci_rxfill(struct uart_port *port)
 {
 	return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
 }
@@ -406,9 +455,9 @@ static inline void sci_receive_chars(struct uart_port *port)
 
 	while (1) {
 		if (port->type == PORT_SCI)
-			count = sci_rxroom(port);
+			count = sci_rxfill(port);
 		else
-			count = scif_rxroom(port);
+			count = scif_rxfill(port);
 
 		/* Don't copy more bytes than there is room for in the buffer */
 		count = tty_buffer_request_room(tty, count);
@@ -453,10 +502,10 @@ static inline void sci_receive_chars(struct uart_port *port)
 				}
 
 				/* Store data and status */
-				if (status&SCxSR_FER(port)) {
+				if (status & SCxSR_FER(port)) {
 					flag = TTY_FRAME;
 					dev_notice(port->dev, "frame error\n");
-				} else if (status&SCxSR_PER(port)) {
+				} else if (status & SCxSR_PER(port)) {
 					flag = TTY_PARITY;
 					dev_notice(port->dev, "parity error\n");
 				} else
@@ -618,13 +667,39 @@ static inline int sci_handle_breaks(struct uart_port *port)
 	return copied;
 }
 
-static irqreturn_t sci_rx_interrupt(int irq, void *port)
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 {
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->chan_rx) {
+		unsigned long tout;
+		u16 scr = sci_in(port, SCSCR);
+		u16 ssr = sci_in(port, SCxSR);
+
+		/* Disable future Rx interrupts */
+		sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE);
+		/* Clear current interrupt */
+		sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+		/* Calculate delay for 1.5 DMA buffers */
+		tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
+			port->fifosize / 2;
+		dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n",
+			tout * 1000 / HZ);
+		if (tout < 2)
+			tout = 2;
+		mod_timer(&s->rx_timer, jiffies + tout);
+
+		return IRQ_HANDLED;
+	}
+#endif
+
 	/* I think sci_receive_chars has to be called irrespective
 	 * of whether the I_IXOFF is set, otherwise, how is the interrupt
 	 * to be disabled?
 	 */
-	sci_receive_chars(port);
+	sci_receive_chars(ptr);
 
 	return IRQ_HANDLED;
 }
@@ -680,6 +755,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
 	unsigned short ssr_status, scr_status, err_enabled;
 	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
 	irqreturn_t ret = IRQ_NONE;
 
 	ssr_status = sci_in(port, SCxSR);
@@ -687,10 +763,15 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
-	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) &&
+	    !s->chan_tx)
 		ret = sci_tx_interrupt(irq, ptr);
-	/* Rx Interrupt */
-	if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	/*
+	 * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
+	 * DR flags
+	 */
+	if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
+	    (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
 	if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -699,6 +780,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
+	WARN_ONCE(ret == IRQ_NONE,
+		  "%s: %d IRQ %d, status %x, control %x\n", __func__,
+		  irq, port->line, ssr_status, scr_status);
+
 	return ret;
 }
 
@@ -800,7 +885,9 @@ static void sci_free_irq(struct sci_port *port)
 static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = sci_in(port, SCxSR);
-	return status & SCxSR_TEND(port) ? TIOCSER_TEMT : 0;
+	unsigned short in_tx_fifo = scif_txfill(port);
+
+	return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
 }
 
 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -812,16 +899,297 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static unsigned int sci_get_mctrl(struct uart_port *port)
 {
-	/* This routine is used for geting signals of: DTR, DCD, DSR, RI,
+	/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
 	   and CTS/RTS */
 
 	return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
 }
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+	struct sci_port *s = arg;
+	struct uart_port *port = &s->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned long flags;
+
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	xmit->tail += s->sg_tx.length;
+	xmit->tail &= UART_XMIT_SIZE - 1;
+
+	port->icount.tx += s->sg_tx.length;
+
+	async_tx_ack(s->desc_tx);
+	s->cookie_tx = -EINVAL;
+	s->desc_tx = NULL;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_chars_pending(xmit))
+		schedule_work(&s->work_tx);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
+			   size_t count)
+{
+	struct uart_port *port = &s->port;
+	int i, active, room;
+
+	room = tty_buffer_request_room(tty, count);
+
+	if (s->active_rx == s->cookie_rx[0]) {
+		active = 0;
+	} else if (s->active_rx == s->cookie_rx[1]) {
+		active = 1;
+	} else {
+		dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+		return 0;
+	}
+
+	if (room < count)
+		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+			 count - room);
+	if (!room)
+		return room;
+
+	for (i = 0; i < room; i++)
+		tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
+				     TTY_NORMAL);
+
+	port->icount.rx += room;
+
+	return room;
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+	struct sci_port *s = arg;
+	struct uart_port *port = &s->port;
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned long flags;
+	int count;
+
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	count = sci_dma_rx_push(s, tty, s->buf_len_rx);
+
+	mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5));
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (count)
+		tty_flip_buffer_push(tty);
+
+	schedule_work(&s->work_rx);
+}
+
+static void sci_start_rx(struct uart_port *port);
+static void sci_start_tx(struct uart_port *port);
+
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+{
+	struct dma_chan *chan = s->chan_rx;
+	struct uart_port *port = &s->port;
+
+	s->chan_rx = NULL;
+	s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+	dma_release_channel(chan);
+	dma_free_coherent(port->dev, s->buf_len_rx * 2,
+			  sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
+	if (enable_pio)
+		sci_start_rx(port);
+}
+
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+{
+	struct dma_chan *chan = s->chan_tx;
+	struct uart_port *port = &s->port;
+
+	s->chan_tx = NULL;
+	s->cookie_tx = -EINVAL;
+	dma_release_channel(chan);
+	if (enable_pio)
+		sci_start_tx(port);
+}
+
+static void sci_submit_rx(struct sci_port *s)
+{
+	struct dma_chan *chan = s->chan_rx;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		struct scatterlist *sg = &s->sg_rx[i];
+		struct dma_async_tx_descriptor *desc;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT);
+
+		if (desc) {
+			s->desc_rx[i] = desc;
+			desc->callback = sci_dma_rx_complete;
+			desc->callback_param = s;
+			s->cookie_rx[i] = desc->tx_submit(desc);
+		}
+
+		if (!desc || s->cookie_rx[i] < 0) {
+			if (i) {
+				async_tx_ack(s->desc_rx[0]);
+				s->cookie_rx[0] = -EINVAL;
+			}
+			if (desc) {
+				async_tx_ack(desc);
+				s->cookie_rx[i] = -EINVAL;
+			}
+			dev_warn(s->port.dev,
+				 "failed to re-start DMA, using PIO\n");
+			sci_rx_dma_release(s, true);
+			return;
+		}
+	}
+
+	s->active_rx = s->cookie_rx[0];
+
+	dma_async_issue_pending(chan);
+}
+
+static void work_fn_rx(struct work_struct *work)
+{
+	struct sci_port *s = container_of(work, struct sci_port, work_rx);
+	struct uart_port *port = &s->port;
+	struct dma_async_tx_descriptor *desc;
+	int new;
+
+	if (s->active_rx == s->cookie_rx[0]) {
+		new = 0;
+	} else if (s->active_rx == s->cookie_rx[1]) {
+		new = 1;
+	} else {
+		dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+		return;
+	}
+	desc = s->desc_rx[new];
+
+	if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
+	    DMA_SUCCESS) {
+		/* Handle incomplete DMA receive */
+		struct tty_struct *tty = port->state->port.tty;
+		struct dma_chan *chan = s->chan_rx;
+		struct sh_desc *sh_desc = container_of(desc, struct sh_desc,
+						       async_tx);
+		unsigned long flags;
+		int count;
+
+		chan->device->device_terminate_all(chan);
+		dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+			sh_desc->partial, sh_desc->cookie);
+
+		spin_lock_irqsave(&port->lock, flags);
+		count = sci_dma_rx_push(s, tty, sh_desc->partial);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		if (count)
+			tty_flip_buffer_push(tty);
+
+		sci_submit_rx(s);
+
+		return;
+	}
+
+	s->cookie_rx[new] = desc->tx_submit(desc);
+	if (s->cookie_rx[new] < 0) {
+		dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+		sci_rx_dma_release(s, true);
+		return;
+	}
+
+	dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__,
+		s->cookie_rx[new], new);
+
+	s->active_rx = s->cookie_rx[!new];
+}
+
+static void work_fn_tx(struct work_struct *work)
+{
+	struct sci_port *s = container_of(work, struct sci_port, work_tx);
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = s->chan_tx;
+	struct uart_port *port = &s->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = &s->sg_tx;
+
+	/*
+	 * DMA is idle now.
+	 * Port xmit buffer is already mapped, and it is one page... Just adjust
+	 * offsets and lengths. Since it is a circular buffer, we have to
+	 * transmit till the end, and then the rest. Take the port lock to get a
+	 * consistent xmit buffer state.
+	 */
+	spin_lock_irq(&port->lock);
+	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+	sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+		sg->offset;
+	sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+	sg->dma_length = sg->length;
+	spin_unlock_irq(&port->lock);
+
+	BUG_ON(!sg->length);
+
+	desc = chan->device->device_prep_slave_sg(chan,
+			sg, s->sg_len_tx, DMA_TO_DEVICE,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		/* switch to PIO */
+		sci_tx_dma_release(s, true);
+		return;
+	}
+
+	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+	spin_lock_irq(&port->lock);
+	s->desc_tx = desc;
+	desc->callback = sci_dma_tx_complete;
+	desc->callback_param = s;
+	spin_unlock_irq(&port->lock);
+	s->cookie_tx = desc->tx_submit(desc);
+	if (s->cookie_tx < 0) {
+		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+		/* switch to PIO */
+		sci_tx_dma_release(s, true);
+		return;
+	}
+
+	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
+		xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+
+	dma_async_issue_pending(chan);
+}
+#endif
+
 static void sci_start_tx(struct uart_port *port)
 {
 	unsigned short ctrl;
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->chan_tx) {
+		if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0)
+			schedule_work(&s->work_tx);
+
+		return;
+	}
+#endif
+
 	/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
 	ctrl |= SCI_CTRL_FLAGS_TIE;
@@ -838,13 +1206,12 @@ static void sci_stop_tx(struct uart_port *port)
 	sci_out(port, SCSCR, ctrl);
 }
 
-static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
+static void sci_start_rx(struct uart_port *port)
 {
-	unsigned short ctrl;
+	unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
-	ctrl = sci_in(port, SCSCR);
-	ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+	ctrl |= sci_in(port, SCSCR);
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -868,16 +1235,154 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 	/* Nothing here yet .. */
 }
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static bool filter(struct dma_chan *chan, void *slave)
+{
+	struct sh_dmae_slave *param = slave;
+
+	dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
+		param->slave_id);
+
+	if (param->dma_dev == chan->device->dev) {
+		chan->private = param;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+static void rx_timer_fn(unsigned long arg)
+{
+	struct sci_port *s = (struct sci_port *)arg;
+	struct uart_port *port = &s->port;
+
+	u16 scr = sci_in(port, SCSCR);
+	sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE);
+	dev_dbg(port->dev, "DMA Rx timed out\n");
+	schedule_work(&s->work_rx);
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+	struct sh_dmae_slave *param;
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	int nent;
+
+	dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__,
+		port->line, s->dma_dev);
+
+	if (!s->dma_dev)
+		return;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	param = &s->param_tx;
+
+	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
+	param->slave_id = s->slave_tx;
+	param->dma_dev = s->dma_dev;
+
+	s->cookie_tx = -EINVAL;
+	chan = dma_request_channel(mask, filter, param);
+	dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+	if (chan) {
+		s->chan_tx = chan;
+		sg_init_table(&s->sg_tx, 1);
+		/* UART circular tx buffer is an aligned page. */
+		BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+		sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
+			    UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+		nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
+		if (!nent)
+			sci_tx_dma_release(s, false);
+		else
+			dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+				sg_dma_len(&s->sg_tx),
+				port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+
+		s->sg_len_tx = nent;
+
+		INIT_WORK(&s->work_tx, work_fn_tx);
+	}
+
+	param = &s->param_rx;
+
+	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
+	param->slave_id = s->slave_rx;
+	param->dma_dev = s->dma_dev;
+
+	chan = dma_request_channel(mask, filter, param);
+	dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+	if (chan) {
+		dma_addr_t dma[2];
+		void *buf[2];
+		int i;
+
+		s->chan_rx = chan;
+
+		s->buf_len_rx = 2 * max(16, (int)port->fifosize);
+		buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
+					    &dma[0], GFP_KERNEL);
+
+		if (!buf[0]) {
+			dev_warn(port->dev,
+				 "failed to allocate dma buffer, using PIO\n");
+			sci_rx_dma_release(s, true);
+			return;
+		}
+
+		buf[1] = buf[0] + s->buf_len_rx;
+		dma[1] = dma[0] + s->buf_len_rx;
+
+		for (i = 0; i < 2; i++) {
+			struct scatterlist *sg = &s->sg_rx[i];
+
+			sg_init_table(sg, 1);
+			sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
+				    (int)buf[i] & ~PAGE_MASK);
+			sg->dma_address = dma[i];
+			sg->dma_length = sg->length;
+		}
+
+		INIT_WORK(&s->work_rx, work_fn_rx);
+		setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+		sci_submit_rx(s);
+	}
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+
+	if (!s->dma_dev)
+		return;
+
+	if (s->chan_tx)
+		sci_tx_dma_release(s, false);
+	if (s->chan_rx)
+		sci_rx_dma_release(s, false);
+}
+#endif
+
 static int sci_startup(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
 	if (s->enable)
 		s->enable(port);
 
 	sci_request_irq(s);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_request_dma(port);
+#endif
 	sci_start_tx(port);
-	sci_start_rx(port, 1);
+	sci_start_rx(port);
 
 	return 0;
 }
@@ -886,8 +1391,13 @@ static void sci_shutdown(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
 	sci_stop_rx(port);
 	sci_stop_tx(port);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_free_dma(port);
+#endif
 	sci_free_irq(s);
 
 	if (s->disable)
@@ -937,6 +1447,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sci_out(port, SCSMR, smr_val);
 
+	dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
+		SCSCR_INIT(port));
+
 	if (t > 0) {
 		if (t >= 256) {
 			sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
@@ -954,7 +1467,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
 	if ((termios->c_cflag & CREAD) != 0)
-		sci_start_rx(port, 0);
+		sci_start_rx(port);
 }
 
 static const char *sci_type(struct uart_port *port)
@@ -1049,19 +1562,21 @@ static void __devinit sci_init_single(struct platform_device *dev,
 				      unsigned int index,
 				      struct plat_sci_port *p)
 {
-	sci_port->port.ops	= &sci_uart_ops;
-	sci_port->port.iotype	= UPIO_MEM;
-	sci_port->port.line	= index;
+	struct uart_port *port = &sci_port->port;
+
+	port->ops	= &sci_uart_ops;
+	port->iotype	= UPIO_MEM;
+	port->line	= index;
 
 	switch (p->type) {
 	case PORT_SCIFA:
-		sci_port->port.fifosize = 64;
+		port->fifosize = 64;
 		break;
 	case PORT_SCIF:
-		sci_port->port.fifosize = 16;
+		port->fifosize = 16;
 		break;
 	default:
-		sci_port->port.fifosize = 1;
+		port->fifosize = 1;
 		break;
 	}
 
@@ -1070,19 +1585,28 @@ static void __devinit sci_init_single(struct platform_device *dev,
 		sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
 		sci_port->enable = sci_clk_enable;
 		sci_port->disable = sci_clk_disable;
-		sci_port->port.dev = &dev->dev;
+		port->dev = &dev->dev;
 	}
 
 	sci_port->break_timer.data = (unsigned long)sci_port;
 	sci_port->break_timer.function = sci_break_timer;
 	init_timer(&sci_port->break_timer);
 
-	sci_port->port.mapbase	= p->mapbase;
-	sci_port->port.membase	= p->membase;
+	port->mapbase	= p->mapbase;
+	port->membase	= p->membase;
 
-	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
-	sci_port->port.flags	= p->flags;
-	sci_port->type		= sci_port->port.type = p->type;
+	port->irq	= p->irqs[SCIx_TXI_IRQ];
+	port->flags	= p->flags;
+	sci_port->type	= port->type = p->type;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_port->dma_dev	= p->dma_dev;
+	sci_port->slave_tx	= p->dma_slave_tx;
+	sci_port->slave_rx	= p->dma_slave_rx;
+
+	dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__,
+		p->dma_dev, p->dma_slave_tx, p->dma_slave_rx);
+#endif
 
 	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
 }
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 34b31da0..7bf1026 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -421,7 +421,7 @@ static struct uart_driver timbuart_driver = {
 
 static int timbuart_probe(struct platform_device *dev)
 {
-	int err;
+	int err, irq;
 	struct timbuart_port *uart;
 	struct resource *iomem;
 
@@ -453,11 +453,12 @@ static int timbuart_probe(struct platform_device *dev)
 	uart->port.mapbase = iomem->start;
 	uart->port.membase = NULL;
 
-	uart->port.irq = platform_get_irq(dev, 0);
-	if (uart->port.irq < 0) {
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
 		err = -EINVAL;
 		goto err_register;
 	}
+	uart->port.irq = irq;
 
 	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);