Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...

10 files changed, 67 insertions, 31 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 381b12a..d935b2d 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -66,7 +66,6 @@
 #endif
 
 static struct m68k_serial m68k_soft[NR_PORTS];
-struct m68k_serial *IRQ_ports[NR_IRQS];
 
 static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
 
@@ -375,15 +374,11 @@ clear_and_return:
  */
 irqreturn_t rs_interrupt(int irq, void *dev_id)
 {
-	struct m68k_serial * info;
+	struct m68k_serial *info = dev_id;
 	m68328_uart *uart;
 	unsigned short rx;
 	unsigned short tx;
 
-	info = IRQ_ports[irq];
-	if(!info)
-	    return IRQ_NONE;
-
 	uart = &uart_addr[info->line];
 	rx = uart->urx.w;
 
@@ -1383,8 +1378,6 @@ rs68328_init(void)
 		   info->port, info->irq);
 	    printk(" is a builtin MC68328 UART\n");
 	    
-	    IRQ_ports[info->irq] = info;	/* waste of space */
-
 #ifdef CONFIG_M68VZ328
 		if (i > 0 )
 			PJSEL &= 0xCF;  /* PSW enable second port output */
@@ -1393,7 +1386,7 @@ rs68328_init(void)
 	    if (request_irq(uart_irqs[i],
 			    rs_interrupt,
 			    IRQF_DISABLED,
-			    "M68328_UART", NULL))
+			    "M68328_UART", info))
                 panic("Unable to attach 68328 serial interrupt\n");
 	}
 	local_irq_restore(flags);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1528de2..303272a 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -156,11 +156,15 @@ struct uart_8250_port {
 };
 
 struct irq_info {
-	spinlock_t		lock;
+	struct			hlist_node node;
+	int			irq;
+	spinlock_t		lock;	/* Protects list not the hash */
 	struct list_head	*head;
 };
 
-static struct irq_info irq_lists[NR_IRQS];
+#define NR_IRQ_HASH		32	/* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex);	/* Used to walk the hash */
 
 /*
  * Here we define the default xmit fifo size used for each type of UART.
@@ -1545,15 +1549,43 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
 		BUG_ON(i->head != &up->list);
 		i->head = NULL;
 	}
-
 	spin_unlock_irq(&i->lock);
+	/* List empty so throw away the hash node */
+	if (i->head == NULL) {
+		hlist_del(&i->node);
+		kfree(i);
+	}
 }
 
 static int serial_link_irq_chain(struct uart_8250_port *up)
 {
-	struct irq_info *i = irq_lists + up->port.irq;
+	struct hlist_head *h;
+	struct hlist_node *n;
+	struct irq_info *i;
 	int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
 
+	mutex_lock(&hash_mutex);
+
+	h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+	hlist_for_each(n, h) {
+		i = hlist_entry(n, struct irq_info, node);
+		if (i->irq == up->port.irq)
+			break;
+	}
+
+	if (n == NULL) {
+		i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+		if (i == NULL) {
+			mutex_unlock(&hash_mutex);
+			return -ENOMEM;
+		}
+		spin_lock_init(&i->lock);
+		i->irq = up->port.irq;
+		hlist_add_head(&i->node, h);
+	}
+	mutex_unlock(&hash_mutex);
+
 	spin_lock_irq(&i->lock);
 
 	if (i->head) {
@@ -1577,14 +1609,28 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 static void serial_unlink_irq_chain(struct uart_8250_port *up)
 {
-	struct irq_info *i = irq_lists + up->port.irq;
+	struct irq_info *i;
+	struct hlist_node *n;
+	struct hlist_head *h;
 
+	mutex_lock(&hash_mutex);
+
+	h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+	hlist_for_each(n, h) {
+		i = hlist_entry(n, struct irq_info, node);
+		if (i->irq == up->port.irq)
+			break;
+	}
+
+	BUG_ON(n == NULL);
 	BUG_ON(i->head == NULL);
 
 	if (list_empty(i->head))
 		free_irq(up->port.irq, i);
 
 	serial_do_unlink(i, up);
+	mutex_unlock(&hash_mutex);
 }
 
 /* Base timer interval for polling */
@@ -2447,7 +2493,7 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 static int
 serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+	if (ser->irq >= nr_irqs || ser->irq < 0 ||
 	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
 	    ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
 	    ser->type == PORT_STARTECH)
@@ -2967,7 +3013,7 @@ EXPORT_SYMBOL(serial8250_unregister_port);
 
 static int __init serial8250_init(void)
 {
-	int ret, i;
+	int ret;
 
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
@@ -2976,9 +3022,6 @@ static int __init serial8250_init(void)
 		"%d ports, IRQ sharing %sabled\n", nr_uarts,
 		share_irqs ? "en" : "dis");
 
-	for (i = 0; i < NR_IRQS; i++)
-		spin_lock_init(&irq_lists[i].lock);
-
 #ifdef CONFIG_SPARC
 	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
 #else
@@ -3006,15 +3049,15 @@ static int __init serial8250_init(void)
 		goto out;
 
 	platform_device_del(serial8250_isa_devs);
- put_dev:
+put_dev:
 	platform_device_put(serial8250_isa_devs);
- unreg_uart_drv:
+unreg_uart_drv:
 #ifdef CONFIG_SPARC
 	sunserial_unregister_minors(&serial8250_reg, UART_NR);
 #else
 	uart_unregister_driver(&serial8250_reg);
 #endif
- out:
+out:
 	return ret;
 }
 
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 90b56c2..7156268 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -512,7 +512,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
 	int ret = 0;
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 9d08f27..b718004 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -572,7 +572,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
 	int ret = 0;
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a6c4d74..bde4b4b0 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -623,7 +623,7 @@ static int cpm_uart_verify_port(struct uart_port *port,
 
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 23d0305..611c97a 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -922,7 +922,7 @@ static void m32r_sio_config_port(struct uart_port *port, int flags)
 static int
 m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+	if (ser->irq >= nr_irqs || ser->irq < 0 ||
 	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
 	    ser->type >= ARRAY_SIZE(uart_config))
 		return -EINVAL;
@@ -1162,7 +1162,7 @@ static int __init m32r_sio_init(void)
 
 	printk(KERN_INFO "Serial: M32R SIO driver\n");
 
-	for (i = 0; i < NR_IRQS; i++)
+	for (i = 0; i < nr_irqs; i++)
 		spin_lock_init(&irq_lists[i].lock);
 
 	ret = uart_register_driver(&m32r_sio_reg);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 6bdf336..874786a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -741,7 +741,7 @@ static int uart_set_info(struct uart_state *state,
 	if (port->ops->verify_port)
 		retval = port->ops->verify_port(port, &new_serial);
 
-	if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+	if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
 	    (new_serial.baud_base < 9600))
 		retval = -EINVAL;
 
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index cb49a5a..61dc8b3 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -460,7 +460,7 @@ static int lh7a40xuart_verify_port (struct uart_port* port,
 
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600) /* *** FIXME: is this true? */
 		ret = -EINVAL;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 3b9d2d8..f0658d2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1149,7 +1149,7 @@ static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	struct sci_port *s = &sci_ports[port->line];
 
-	if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+	if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
 		return -EINVAL;
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 539c933..315a933 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1066,7 +1066,7 @@ static int qe_uart_verify_port(struct uart_port *port,
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
 		return -EINVAL;
 
-	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		return -EINVAL;
 
 	if (ser->baud_base < 9600)