summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorFeng Tang <feng.tang@intel.com>2010-07-27 08:20:42 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2010-08-10 13:47:46 -0700
commit06c77e21ae7c199435097116b8212b0761fc8ba8 (patch)
tree2ae53076c07cbf8c112345aeeedb26a22ad7fd59 /drivers/serial
parent669b7a0938e759097c150400cd36bd49befaf5bb (diff)
downloadop-kernel-dev-06c77e21ae7c199435097116b8212b0761fc8ba8.zip
op-kernel-dev-06c77e21ae7c199435097116b8212b0761fc8ba8.tar.gz
hsu: some code cleanup
Major changes are: * refine the comments in the driver * remove unused member from structure "hsu_port" * extended spin_lock protoction for dma mode in port_irq() Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/mfd.c85
1 files changed, 19 insertions, 66 deletions
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index ed2bf6b..f5e7569 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -3,7 +3,7 @@
*
* Refer pxa.c, 8250.c and some other drivers in drivers/serial/
*
- * (C) Copyright 2009 Intel Corporation
+ * (C) Copyright 2010 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -11,30 +11,16 @@
* of the License.
*/
-
/* Notes:
- * 1. there should be 2 types of register access method, one for
- * UART ports, the other for the general purpose registers
- *
- * 2. It used to have a Irda port, but was defeatured recently
- *
- * 3. Based on the info from HSU MAS, 0/1 channel are assigned to
- * port0, 2/3 chan to port 1, 4/5 chan to port 3. Even number
- * chan will be read, odd chan for write
- *
- * 4. HUS supports both the 64B and 16B FIFO version, but this driver
- * will only use 64B version
+ * 1. DMA channel allocation: 0/1 channel are assigned to port 0,
+ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans
+ * are used for RX, odd chans for TX
*
- * 5. In A0 stepping, UART will not support TX half empty flag, thus
- * need add a #ifdef judgement
+ * 2. In A0 stepping, UART will not support TX half empty flag
*
- * 6. One more bug for A0, the loopback mode won't support AFC
- * auto-flow control
- *
- * 7. HSU has some special FCR control bits, we add it to serial_reg.h
- *
- * 8. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always asserted,
- * only when the HW is reset the DDCD and DDSR will be triggered
+ * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * asserted, only when the HW is reset the DDCD and DDSR will
+ * be triggered
*/
#include <linux/module.h>
@@ -75,7 +61,7 @@ struct hsu_dma_buffer {
struct hsu_dma_chan {
u32 id;
- u32 dirt; /* to or from device */
+ enum dma_data_direction dirt;
struct uart_hsu_port *uport;
void __iomem *reg;
struct timer_list rx_timer; /* only needed by RX channel */
@@ -102,8 +88,6 @@ struct uart_hsu_port {
/* Top level data structure of HSU */
struct hsu_port {
- struct pci_device *pdev;
-
void __iomem *reg;
unsigned long paddr;
unsigned long iolen;
@@ -112,23 +96,9 @@ struct hsu_port {
struct uart_hsu_port port[3];
struct hsu_dma_chan chans[10];
-#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
-#endif
};
-static inline void hexdump(char *str, u8 *addr, int cnt)
-{
- int i;
-
- for (i = 0; i < cnt; i += 8) {
- printk("0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x",
- addr[i], addr[i+1], addr[i+2], addr[i+3],
- addr[i+4], addr[i+5], addr[i+6], addr[i+7]);
- printk("\n");
- }
-}
-
static inline unsigned int serial_in(struct uart_hsu_port *up, int offset)
{
unsigned int val;
@@ -353,9 +323,6 @@ void hsu_dma_tx(struct uart_hsu_port *up)
| (0x1 << 8)
| (0x1 << 16)
| (0x1 << 24));
-
- WARN(chan_readl(up->txc, HSU_CH_CR) & 0x1,
- "TX channel has already be started!!\n");
up->dma_tx_on = 1;
chan_writel(up->txc, HSU_CH_CR, 0x1);
}
@@ -367,7 +334,6 @@ void hsu_dma_tx(struct uart_hsu_port *up)
/* The buffer is already cache coherent */
void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf)
{
- /* Need start RX dma channel here */
dbuf->ofs = 0;
chan_writel(rxc, HSU_CH_BSR, 32);
@@ -426,35 +392,32 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
return;
/*
- * first need to know how many is already transferred,
+ * First need to know how many is already transferred,
* then check if its a timeout DMA irq, and return
* the trail bytes out, push them up and reenable the
- * channel, better to use 2 descriptors at the same time
+ * channel
*/
- /* timeout IRQ, need wait some time, see Errata 2 */
+ /* Timeout IRQ, need wait some time, see Errata 2 */
if (int_sts & 0xf00)
udelay(2);
/* Stop the channel */
chan_writel(chan, HSU_CH_CR, 0x0);
- /* We can use 2 ways to calc the actual transfer len */
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
if (!count) {
- /* restart the channel before we leave */
+ /* Restart the channel before we leave */
chan_writel(chan, HSU_CH_CR, 0x3);
return;
}
-
del_timer(&chan->rx_timer);
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
/*
- * head will only wrap around when we recycle
+ * Head will only wrap around when we recycle
* the DMA buffer, and when that happens, we
* explicitly set tail to 0. So head will
* always be greater than tail.
@@ -496,10 +459,6 @@ static void serial_hsu_stop_rx(struct uart_port *port)
}
}
-/*
- * if there is error flag, should we just reset the FIFO or keeps
- * working on it
- */
static inline void receive_chars(struct uart_hsu_port *up, int *status)
{
struct tty_struct *tty = up->port.state->port.tty;
@@ -571,7 +530,6 @@ static void transmit_chars(struct uart_hsu_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
int count;
- int i = 0; /* for debug use */
if (up->port.x_char) {
serial_out(up, UART_TX, up->port.x_char);
@@ -592,13 +550,11 @@ static void transmit_chars(struct uart_hsu_port *up)
* into it won't clear the EMPT bit, so we may need be cautious
* by useing a shorter buffer
*/
- /* count = up->port.fifosize; */
count = up->port.fifosize - 4;
#endif
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- i++;
up->port.icount.tx++;
if (uart_circ_empty(xmit))
@@ -628,7 +584,7 @@ static inline void check_modem_status(struct uart_hsu_port *up)
/* We may only get DDCD when HW init and reset */
if (status & UART_MSR_DDCD)
uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
- /* will start/stop_tx accordingly */
+ /* Will start/stop_tx accordingly */
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
@@ -647,6 +603,7 @@ static irqreturn_t port_irq(int irq, void *dev_id)
if (unlikely(!up->running))
return IRQ_NONE;
+ spin_lock_irqsave(&up->port.lock, flags);
if (up->use_dma) {
lsr = serial_in(up, UART_LSR);
if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
@@ -655,10 +612,10 @@ static irqreturn_t port_irq(int irq, void *dev_id)
"Got lsr irq while using DMA, lsr = 0x%2x\n",
lsr);
check_modem_status(up);
+ spin_unlock_irqrestore(&up->port.lock, flags);
return IRQ_HANDLED;
}
- spin_lock_irqsave(&up->port.lock, flags);
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT) {
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -666,9 +623,9 @@ static irqreturn_t port_irq(int irq, void *dev_id)
}
lsr = serial_in(up, UART_LSR);
-
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
+ check_modem_status(up);
/* lsr will be renewed during the receive_chars */
if (lsr & UART_LSR_THRE)
@@ -701,7 +658,6 @@ static inline void dma_chan_irq(struct hsu_dma_chan *chan)
/* Tx channel */
if (chan->dirt == DMA_TO_DEVICE) {
- /* dma for irq should be done */
chan_writel(chan, HSU_CH_CR, 0x0);
up->dma_tx_on = 0;
hsu_dma_tx(up);
@@ -851,7 +807,6 @@ static int serial_hsu_startup(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
/* DMA init */
- /* When use DMA, TX/RX's FIFO and IRQ should be disabled */
if (up->use_dma) {
struct hsu_dma_buffer *dbuf;
struct circ_buf *xmit = &port->state->xmit;
@@ -1090,11 +1045,9 @@ static int serial_hsu_request_port(struct uart_port *port)
static void serial_hsu_config_port(struct uart_port *port, int flags)
{
-#if 0
struct uart_hsu_port *up =
container_of(port, struct uart_hsu_port, port);
up->port.type = PORT_MFD;
-#endif
}
static int
@@ -1426,7 +1379,7 @@ static void hsu_global_init(void)
uport->port.ops = &serial_hsu_pops;
uport->port.line = i;
uport->port.flags = UPF_IOREMAP;
- /* make the maxim support rate to 2746800 bps */
+ /* set the scalable maxim support rate to 2746800 bps */
uport->port.uartclk = 115200 * 24 * 16;
uport->running = 0;
OpenPOWER on IntegriCloud