diff options
| author | Thomas Hoehn <thomas.hoehn@avocent.com> | 2007-02-10 01:46:05 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-02-11 10:51:33 -0800 |
| commit | 482120084d843d4cbb7ff3eb84510a1471130ce0 (patch) | |
| tree | 22943ce8e09319530a1acf84a397a7b1f6dbea6f /drivers/serial | |
| parent | a21217daae8ce6e841e33d4a2bb24026723cb21d (diff) | |
| download | op-kernel-dev-482120084d843d4cbb7ff3eb84510a1471130ce0.zip op-kernel-dev-482120084d843d4cbb7ff3eb84510a1471130ce0.tar.gz | |
[PATCH] Perle multimodem card (PCI-RAS) detection
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It
may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for
testing.
Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 8 | ||||
| -rw-r--r-- | drivers/serial/8250_pci.c | 16 |
2 files changed, 22 insertions, 2 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 5261f0a..2964ca9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -920,12 +920,16 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) #ifdef __i386__ outb(0xff, 0x080); #endif - scratch2 = serial_inp(up, UART_IER); + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_inp(up, UART_IER) & 0x0f; serial_outp(up, UART_IER, 0x0F); #ifdef __i386__ outb(0, 0x080); #endif - scratch3 = serial_inp(up, UART_IER); + scratch3 = serial_inp(up, UART_IER) & 0x0f; serial_outp(up, UART_IER, scratch); if (scratch2 != 0 || scratch3 != 0x0F) { /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 52e2e64..5dfaa09 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -679,6 +679,13 @@ static struct pci_serial_quirk pci_serial_quirks[] = { */ { .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_SUBVENDOR_ID_PERLE, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050, .subvendor = PCI_SUBVENDOR_ID_EXSYS, .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, @@ -2379,6 +2386,15 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b2_2_115200 }, /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ |
