summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-03-11 17:10:07 +1100
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-03-11 17:10:07 +1100
commite14eee56c2280953c6e3d24d5dce42bd90836b81 (patch)
tree21ab792d9ad6fbbab460058f352a0158f995644e /drivers/serial
parentd6ee6f7e4c74d9a0fed7544f4d389bde004651d3 (diff)
parent99adcd9d67aaf04e28f5ae96df280f236bde4b66 (diff)
downloadop-kernel-dev-e14eee56c2280953c6e3d24d5dce42bd90836b81.zip
op-kernel-dev-e14eee56c2280953c6e3d24d5dce42bd90836b81.tar.gz
Merge commit 'origin/master' into next
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/serial/8250_pci.c36
-rw-r--r--drivers/serial/atmel_serial.c4
-rw-r--r--drivers/serial/jsm/jsm_driver.c3
-rw-r--r--drivers/serial/sh-sci.h2
5 files changed, 59 insertions, 1 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d934bf..b4b3981 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port)
serial8250_set_mctrl(&up->port, up->port.mctrl);
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
/*
* Do a quick test to see if we receive an
* interrupt when we enable the TX irq.
@@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port)
up->bugs &= ~UART_BUG_TXEN;
}
+dont_test_tx_en:
spin_unlock_irqrestore(&up->port.lock, flags);
/*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 536d8e5..533f820 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int skip_tx_en_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_NO_TXEN_TEST;
+ printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+ "[%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor,
+ priv->dev->device,
+ priv->dev->subsystem_vendor,
+ priv->dev->subsystem_device);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
@@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.init = pci_inteli960ni_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_8257X_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573L_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573E_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
/*
* ITE
*/
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 89362d7..8f58f7f 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port)
}
}
+ /* Save current CSR for comparison in atmel_tasklet_func() */
+ atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status = atmel_port->irq_status_prev;
+
/*
* Finally, enable the serial port
*/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 92187e2..ac79cbe 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
brd->pci_dev = pdev;
if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
brd->maxports = 4;
+ else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+ brd->maxports = 8;
else
brd->maxports = 2;
@@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 3599828..022e89f 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,7 +133,7 @@
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
-# define SCIF_OPER 0x0001 /* Overrun error bit */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
defined(CONFIG_CPU_SUBTYPE_SH7203) || \
OpenPOWER on IntegriCloud