Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
  tty: split the lock up a bit further
  tty: Move the leader test in disassociate
  tty: Push the bkl down a bit in the hangup code
  tty: Push the lock down further into the ldisc code
  tty: push the BKL down into the handlers a bit
  tty: moxa: split open lock
  tty: moxa: Kill the use of lock_kernel
  tty: moxa: Fix modem op locking
  tty: moxa: Kill off the throttle method
  tty: moxa: Locking clean up
  tty: moxa: rework the locking a bit
  tty: moxa: Use more tty_port ops
  tty: isicom: fix deadlock on shutdown
  tty: mxser: Use the new locking rules to fix setserial properly
  tty: mxser: use the tty_port_open method
  tty: isicom: sort out the board init logic
  tty: isicom: switch to the new tty_port_open helper
  tty: tty_port: Add a kref object to the tty port
  tty: istallion: tty port open/close methods
  tty: stallion: Convert to the tty_port_open/close methods
  ...

7 files changed, 89 insertions, 51 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 737b4c9..c3e37c8e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 
 		if (up->bugs & UART_BUG_TXEN) {
-			unsigned char lsr, iir;
+			unsigned char lsr;
 			lsr = serial_in(up, UART_LSR);
 			up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-			iir = serial_in(up, UART_IIR) & 0x0f;
 			if ((up->port.type == PORT_RM9000) ?
-				(lsr & UART_LSR_THRE &&
-				(iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
-				(lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
+				(lsr & UART_LSR_THRE) :
+				(lsr & UART_LSR_TEMT))
 				transmit_chars(up);
 		}
 	}
@@ -2646,7 +2644,7 @@ static void __init serial8250_isa_init_ports(void)
 {
 	struct uart_8250_port *up;
 	static int first = 1;
-	int i;
+	int i, irqflag = 0;
 
 	if (!first)
 		return;
@@ -2670,6 +2668,9 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.ops = &serial8250_pops;
 	}
 
+	if (share_irqs)
+		irqflag = IRQF_SHARED;
+
 	for (i = 0, up = serial8250_ports;
 	     i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
 	     i++, up++) {
@@ -2683,8 +2684,7 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.iotype   = old_serial_port[i].io_type;
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
-		if (share_irqs)
-			up->port.irqflags |= IRQF_SHARED;
+		up->port.irqflags |= irqflag;
 	}
 }
 
@@ -2940,10 +2940,13 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 {
 	struct plat_serial8250_port *p = dev->dev.platform_data;
 	struct uart_port port;
-	int ret, i;
+	int ret, i, irqflag = 0;
 
 	memset(&port, 0, sizeof(struct uart_port));
 
+	if (share_irqs)
+		irqflag = IRQF_SHARED;
+
 	for (i = 0; p && p->flags != 0; p++, i++) {
 		port.iobase		= p->iobase;
 		port.membase		= p->membase;
@@ -2960,8 +2963,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
 		port.dev		= &dev->dev;
-		if (share_irqs)
-			port.irqflags |= IRQF_SHARED;
+		port.irqflags		|= irqflag;
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 4e5f3bd..38a509c 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -138,7 +138,6 @@ struct jsm_board
 	u32		nasync;		/* Number of ports on card */
 
 	u32		irq;		/* Interrupt request number */
-	u64		intr_count;	/* Count of interrupts */
 
 	u64		membase;	/* Start of base memory of the card */
 	u64		membase_end;	/* End of base memory of the card */
@@ -206,8 +205,6 @@ struct jsm_channel {
 
 	u64		ch_close_delay;	/* How long we should drop RTS/DTR for */
 
-	u64		ch_cpstime;	/* Time for CPS calculations	*/
-
 	tcflag_t	ch_c_iflag;	/* channel iflags		*/
 	tcflag_t	ch_c_cflag;	/* channel cflags		*/
 	tcflag_t	ch_c_oflag;	/* channel oflags		*/
@@ -215,11 +212,6 @@ struct jsm_channel {
 	u8		ch_stopc;	/* Stop character		*/
 	u8		ch_startc;	/* Start character		*/
 
-	u32		ch_old_baud;	/* Cache of the current baud */
-	u32		ch_custom_speed;/* Custom baud, if set */
-
-	u32		ch_wopen;	/* Waiting for open process cnt */
-
 	u8		ch_mostat;	/* FEP output modem status	*/
 	u8		ch_mistat;	/* FEP input modem status	*/
 
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3604aa..108c3e0 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = {
 	.nr		= NR_PORTS,
 };
 
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+                                       pci_channel_state_t state);
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev);
+static void jsm_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers jsm_err_handler = {
+	.error_detected = jsm_io_error_detected,
+	.slot_reset = jsm_io_slot_reset,
+	.resume = jsm_io_resume,
+};
+
 int jsm_debug;
 module_param(jsm_debug, int, 0);
 MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
@@ -123,7 +134,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	}
 
 	rc = request_irq(brd->irq, brd->bd_ops->intr,
-			IRQF_DISABLED|IRQF_SHARED, "JSM", brd);
+			IRQF_SHARED, "JSM", brd);
 	if (rc) {
 		printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
 		goto out_iounmap;
@@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	}
 
 	pci_set_drvdata(pdev, brd);
+	pci_save_state(pdev);
 
 	return 0;
  out_free_irq:
@@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = {
 	.id_table	= jsm_pci_tbl,
 	.probe		= jsm_probe_one,
 	.remove		= __devexit_p(jsm_remove_one),
+	.err_handler    = &jsm_err_handler,
 };
 
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+					pci_channel_state_t state)
+{
+	struct jsm_board *brd = pci_get_drvdata(pdev);
+
+	jsm_remove_uart_port(brd);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev)
+{
+	int rc;
+
+	rc = pci_enable_device(pdev);
+
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_set_master(pdev);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void jsm_io_resume(struct pci_dev *pdev)
+{
+	struct jsm_board *brd = pci_get_drvdata(pdev);
+
+	pci_restore_state(pdev);
+
+	jsm_uart_port_init(brd);
+}
+
 static int __init jsm_init_module(void)
 {
 	int rc;
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b4b124e..7960d96 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -954,13 +954,8 @@ static void neo_param(struct jsm_channel *ch)
 		ch->ch_flags |= (CH_BAUD0);
 		ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
 		neo_assert_modem_signals(ch);
-		ch->ch_old_baud = 0;
 		return;
 
-	} else if (ch->ch_custom_speed) {
-			baud = ch->ch_custom_speed;
-			if (ch->ch_flags & CH_BAUD0)
-				ch->ch_flags &= ~(CH_BAUD0);
 	} else {
 		int i;
 		unsigned int cflag;
@@ -1045,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch)
 	quot = ch->ch_bd->bd_dividend / baud;
 
 	if (quot != 0) {
-		ch->ch_old_baud = baud;
 		writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr);
 		writeb((quot & 0xff), &ch->ch_neo_uart->txrx);
 		writeb((quot >> 8), &ch->ch_neo_uart->ier);
@@ -1123,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 	unsigned long lock_flags2;
 	int outofloop_count = 0;
 
-	brd->intr_count++;
-
 	/* Lock out the slow poller from running on this board. */
 	spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 7439c03..cd95e21 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port)
 		bd->bd_ops->assert_modem_signals(channel);
 	}
 
-	channel->ch_old_baud = 0;
-
 	/* Turn off UART interrupts for this port */
 	channel->ch_bd->bd_ops->uart_off(channel);
 
@@ -432,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 	return 0;
 }
 
-int __devinit jsm_uart_port_init(struct jsm_board *brd)
+int jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i;
 	unsigned int line;
@@ -472,7 +470,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
 			printk(KERN_INFO "jsm: add device failed\n");
 		else
-			printk(KERN_INFO "Added device \n");
+			printk(KERN_INFO "jsm: Port %d added\n", i);
 	}
 
 	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index b8629d7..4a82104 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -438,6 +438,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
+	unsigned int dll;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -534,10 +535,18 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	else
 		up->mcr &= ~UART_MCR_AFE;
 
-	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);	/* set DLAB */
 	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
+
+	/*
+	 * work around Errata #75 according to Intel(R) PXA27x Processor Family
+	 * Specification Update (Nov 2005)
+	 */
+	dll = serial_in(up, UART_DLL);
+	WARN_ON(dll != (quot & 0xff));
+
 	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
-	serial_out(up, UART_LCR, cval);		/* reset DLAB */
+	serial_out(up, UART_LCR, cval);			/* reset DLAB */
 	up->lcr = cval;					/* Save LCR */
 	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
 	serial_out(up, UART_FCR, fcr);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index dcc7244..047530b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -342,11 +342,11 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 
 	if (flags == UPF_SPD_HI)
 		altbaud = 57600;
-	if (flags == UPF_SPD_VHI)
+	else if (flags == UPF_SPD_VHI)
 		altbaud = 115200;
-	if (flags == UPF_SPD_SHI)
+	else if (flags == UPF_SPD_SHI)
 		altbaud = 230400;
-	if (flags == UPF_SPD_WARP)
+	else if (flags == UPF_SPD_WARP)
 		altbaud = 460800;
 
 	for (try = 0; try < 2; try++) {
@@ -1217,9 +1217,8 @@ static void uart_set_termios(struct tty_struct *tty,
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
 		uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR);
-
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+	else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
 		unsigned int mask = TIOCM_DTR;
 		if (!(cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags))
@@ -1234,9 +1233,8 @@ static void uart_set_termios(struct tty_struct *tty,
 		__uart_start(tty);
 		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
-
 	/* Handle turning on CRTSCTS */
-	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+	else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
 		spin_lock_irqsave(&state->uart_port->lock, flags);
 		if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) {
 			tty->hw_stopped = 1;
@@ -2344,7 +2342,7 @@ static const struct tty_operations uart_ops = {
  */
 int uart_register_driver(struct uart_driver *drv)
 {
-	struct tty_driver *normal = NULL;
+	struct tty_driver *normal;
 	int i, retval;
 
 	BUG_ON(drv->state);
@@ -2354,13 +2352,12 @@ int uart_register_driver(struct uart_driver *drv)
 	 * we have a large number of ports to handle.
 	 */
 	drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL);
-	retval = -ENOMEM;
 	if (!drv->state)
 		goto out;
 
-	normal  = alloc_tty_driver(drv->nr);
+	normal = alloc_tty_driver(drv->nr);
 	if (!normal)
-		goto out;
+		goto out_kfree;
 
 	drv->tty_driver = normal;
 
@@ -2393,12 +2390,14 @@ int uart_register_driver(struct uart_driver *drv)
 	}
 
 	retval = tty_register_driver(normal);
- out:
-	if (retval < 0) {
-		put_tty_driver(normal);
-		kfree(drv->state);
-	}
-	return retval;
+	if (retval >= 0)
+		return retval;
+
+	put_tty_driver(normal);
+out_kfree:
+	kfree(drv->state);
+out:
+	return -ENOMEM;
 }
 
 /**