summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorThomas Hoehn <thomas.hoehn@avocent.com>2007-02-10 01:46:05 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-11 10:51:33 -0800
commit482120084d843d4cbb7ff3eb84510a1471130ce0 (patch)
tree22943ce8e09319530a1acf84a397a7b1f6dbea6f /drivers/serial
parenta21217daae8ce6e841e33d4a2bb24026723cb21d (diff)
downloadop-kernel-dev-482120084d843d4cbb7ff3eb84510a1471130ce0.zip
op-kernel-dev-482120084d843d4cbb7ff3eb84510a1471130ce0.tar.gz
[PATCH] Perle multimodem card (PCI-RAS) detection
Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for testing. Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c8
-rw-r--r--drivers/serial/8250_pci.c16
2 files changed, 22 insertions, 2 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 5261f0a..2964ca9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -920,12 +920,16 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
#ifdef __i386__
outb(0xff, 0x080);
#endif
- scratch2 = serial_inp(up, UART_IER);
+ /*
+ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+ * 16C754B) allow only to modify them if an EFR bit is set.
+ */
+ scratch2 = serial_inp(up, UART_IER) & 0x0f;
serial_outp(up, UART_IER, 0x0F);
#ifdef __i386__
outb(0, 0x080);
#endif
- scratch3 = serial_inp(up, UART_IER);
+ scratch3 = serial_inp(up, UART_IER) & 0x0f;
serial_outp(up, UART_IER, scratch);
if (scratch2 != 0 || scratch3 != 0x0F) {
/*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 52e2e64..5dfaa09 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -679,6 +679,13 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
*/
{
.vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_SUBVENDOR_ID_PERLE,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
@@ -2379,6 +2386,15 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_b2_2_115200 },
/*
+ * Perle PCI-RAS cards
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
+ 0, 0, pbn_b2_4_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
+ 0, 0, pbn_b2_8_921600 },
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
OpenPOWER on IntegriCloud