summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorGeorge G. Davis <gdavis@mvista.com>2007-02-14 00:33:06 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-14 08:09:52 -0800
commit3689a0ec60bc8f56cc372c1dfa0d89dab48f7c9c (patch)
tree2481249f304a34fbff2db433b955178face86026 /drivers/serial
parent9b22271d4b8c1be8a81563c322d3f04e7cbe2153 (diff)
downloadop-kernel-dev-3689a0ec60bc8f56cc372c1dfa0d89dab48f7c9c.zip
op-kernel-dev-3689a0ec60bc8f56cc372c1dfa0d89dab48f7c9c.tar.gz
[PATCH] serial: make sure UART is powered up when dumping MCTRL status
Since serial devices are powered down when not in use and some of those devices cannot be accessed when powered down, we need to enable power around calls to get_mcrtl() when dumping port state via uart_line_info(). This resolves hangs observed on some machines while reading serial device registers when a port is powered off. Signed-off-by: George G. Davis <gdavis@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/serial_core.c11
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f84982e..66fdd3b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1660,6 +1660,7 @@ static const char *uart_type(struct uart_port *port)
static int uart_line_info(char *buf, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
+ int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
@@ -1682,9 +1683,16 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
if(capable(CAP_SYS_ADMIN))
{
+ mutex_lock(&state->mutex);
+ pm_state = state->pm_state;
+ if (pm_state)
+ uart_change_pm(state, 0);
spin_lock_irq(&port->lock);
status = port->ops->get_mctrl(port);
spin_unlock_irq(&port->lock);
+ if (pm_state)
+ uart_change_pm(state, pm_state);
+ mutex_unlock(&state->mutex);
ret += sprintf(buf + ret, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
@@ -2100,6 +2108,9 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
uart_report_port(drv, port);
+ /* Power up port for set_mctrl() */
+ uart_change_pm(state, 0);
+
/*
* Ensure that the modem control lines are de-activated.
* We probably don't need a spinlock around this, but
OpenPOWER on IntegriCloud