summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sunsu.c
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2006-01-21 19:28:15 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-01-21 19:28:15 +0000
commitce8337cb7dc327c3ae3684ba0ee5d7cbde1fd296 (patch)
tree196d5859a9c52eefd9f479ddda71a5b43387fd64 /drivers/serial/sunsu.c
parentf91a3715db2bb44fcf08cec642e68f919b70f7f4 (diff)
downloadop-kernel-dev-ce8337cb7dc327c3ae3684ba0ee5d7cbde1fd296.zip
op-kernel-dev-ce8337cb7dc327c3ae3684ba0ee5d7cbde1fd296.tar.gz
[SERIAL] Don't use ASYNC_ constants with the uart_port structure
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/sunsu.c')
-rw-r--r--drivers/serial/sunsu.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b..bc67442 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -669,7 +669,7 @@ static int sunsu_startup(struct uart_port *port)
* if it is, then bail out, because there's likely no UART
* here.
*/
- if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
return -ENODEV;
@@ -707,7 +707,7 @@ static int sunsu_startup(struct uart_port *port)
up->ier = UART_IER_RLSI | UART_IER_RDI;
serial_outp(up, UART_IER, up->ier);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
unsigned int icp;
/*
* Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@ static void sunsu_shutdown(struct uart_port *port)
serial_outp(up, UART_IER, 0);
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
/* reset interrupts on the AST Fourport board */
inb((up->port.iobase & 0xfe0) | 0x1f);
up->port.mctrl |= TIOCM_OUT1;
@@ -1132,7 +1132,7 @@ ebus_done:
spin_lock_irqsave(&up->port.lock, flags);
- if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+ if (!(up->port.flags & UPF_BUGGY_UART)) {
/*
* Do a simple existence test first; if we fail this, there's
* no point trying anything else.
@@ -1170,7 +1170,7 @@ ebus_done:
* manufacturer would be stupid enough to design a board
* that conflicts with COM 1-4 --- we hope!
*/
- if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+ if (!(up->port.flags & UPF_SKIP_TEST)) {
serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
status1 = serial_inp(up, UART_MSR) & 0xF0;
serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
/* Wait up to 1s for flow control if necessary */
- if (up->port.flags & ASYNC_CONS_FLOW) {
+ if (up->port.flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout &&
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@ static int __init sunsu_serial_init(void)
up->su_type == SU_PORT_KBD)
continue;
- up->port.flags |= ASYNC_BOOT_AUTOCONF;
+ up->port.flags |= UPF_BOOT_AUTOCONF;
up->port.type = PORT_UNKNOWN;
up->port.uartclk = (SU_BASE_BAUD * 16);
OpenPOWER on IntegriCloud