summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sunsu.c
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2005-04-21 22:06:13 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2005-04-21 22:06:13 -0700
commit623f41eb923d7f34888cbd9e4f50a7b1a79d0ae5 (patch)
tree261baa54024f334d2a6f888e383e75cc12ffd757 /drivers/serial/sunsu.c
parentb4bca26c0160f48b4eb04f21d31a229832732013 (diff)
downloadop-kernel-dev-623f41eb923d7f34888cbd9e4f50a7b1a79d0ae5.zip
op-kernel-dev-623f41eb923d7f34888cbd9e4f50a7b1a79d0ae5.tar.gz
[SPARC64]: In sunsu driver, make sure to fully init chip for kbd/ms
We were forgetting to call sunsu_change_speed(). The reason that replugging in the mouse cable "fixes things" is that causes a BREAK interrupt which in turn caused a call to sunsu_change_speed() which would get the chip setup properly. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/serial/sunsu.c')
-rw-r--r--drivers/serial/sunsu.c11
1 files changed, 9 insertions, 2 deletions
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 23d19d3..ddc97c9 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1285,6 +1285,7 @@ static struct uart_driver sunsu_reg = {
static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
{
+ int quot, baud;
#ifdef CONFIG_SERIO
struct serio *serio;
#endif
@@ -1293,10 +1294,14 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
up->port.type = PORT_UNKNOWN;
up->port.uartclk = (SU_BASE_BAUD * 16);
- if (up->su_type == SU_PORT_KBD)
+ if (up->su_type == SU_PORT_KBD) {
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
- else
+ baud = 1200;
+ } else {
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
+ baud = 4800;
+ }
+ quot = up->port.uartclk / (16 * baud);
sunsu_autoconfig(up);
if (up->port.type == PORT_UNKNOWN)
@@ -1337,6 +1342,8 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
}
#endif
+ sunsu_change_speed(&up->port, up->cflag, 0, quot);
+
sunsu_startup(&up->port);
return 0;
}
OpenPOWER on IntegriCloud