summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sunsab.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/sunsab.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/sunsab.c')
-rw-r--r--drivers/serial/sunsab.c1171
1 files changed, 1171 insertions, 0 deletions
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
new file mode 100644
index 0000000..8caaf2e
--- /dev/null
+++ b/drivers/serial/sunsab.c
@@ -0,0 +1,1171 @@
+/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ *
+ * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
+ * Maxim Krasnyanskiy <maxk@qualcomm.com>
+ *
+ * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
+ * rates to be programmed into the UART. Also eliminated a lot of
+ * duplicated code in the console setup.
+ * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
+ *
+ * Ported to new 2.5.x UART layer.
+ * David S. Miller <davem@redhat.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/oplib.h>
+#include <asm/ebus.h>
+
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunsab.h"
+
+struct uart_sunsab_port {
+ struct uart_port port; /* Generic UART port */
+ union sab82532_async_regs __iomem *regs; /* Chip registers */
+ unsigned long irqflags; /* IRQ state flags */
+ int dsr; /* Current DSR state */
+ unsigned int cec_timeout; /* Chip poll timeout... */
+ unsigned int tec_timeout; /* likewise */
+ unsigned char interrupt_mask0;/* ISR0 masking */
+ unsigned char interrupt_mask1;/* ISR1 masking */
+ unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
+ unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
+ int type; /* SAB82532 version */
+};
+
+/*
+ * This assumes you have a 29.4912 MHz clock for your UART.
+ */
+#define SAB_BASE_BAUD ( 29491200 / 16 )
+
+static char *sab82532_version[16] = {
+ "V1.0", "V2.0", "V3.2", "V(0x03)",
+ "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
+ "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
+ "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
+};
+
+#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
+#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
+
+#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
+#define SAB82532_XMIT_FIFO_SIZE 32
+
+static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->tec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
+ udelay(1);
+}
+
+static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->cec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
+ udelay(1);
+}
+
+static struct tty_struct *
+receive_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = NULL;
+ unsigned char buf[32];
+ int saw_console_brk = 0;
+ int free_fifo = 0;
+ int count = 0;
+ int i;
+
+ if (up->port.info != NULL) /* Unopened serial console */
+ tty = up->port.info->tty;
+
+ /* Read number of BYTES (Character + Status) available. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
+ count = SAB82532_RECV_FIFO_SIZE;
+ free_fifo++;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
+ count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
+ free_fifo++;
+ }
+
+ /* Issue a FIFO read command in case we where idle. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
+ return tty;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ free_fifo++;
+
+ /* Read the FIFO. */
+ for (i = 0; i < count; i++)
+ buf[i] = readb(&up->regs->r.rfifo[i]);
+
+ /* Issue Receive Message Complete command. */
+ if (free_fifo) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
+ }
+
+ /* Count may be zero for BRK, so we check for it here */
+ if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
+ (up->port.line == up->port.cons->index))
+ saw_console_brk = 1;
+
+ for (i = 0; i < count; i++) {
+ unsigned char ch = buf[i];
+
+ if (tty == NULL) {
+ uart_handle_sysrq_char(&up->port, ch, regs);
+ continue;
+ }
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return tty; // if TTY_DONT_FLIP is set
+ }
+
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR |
+ SAB82532_ISR0_RFO)) ||
+ unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
+ /*
+ * For statistics only
+ */
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ continue;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ up->port.icount.parity++;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ up->port.icount.frame++;
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
+ stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ continue;
+
+ if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
+ (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0){
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((stat->sreg.isr0 & SAB82532_ISR0_RFO) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ }
+
+ if (saw_console_brk)
+ sun_do_break();
+
+ return tty;
+}
+
+static void sunsab_stop_tx(struct uart_port *, unsigned int);
+
+static void transmit_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int i;
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
+ up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ }
+
+#if 0 /* bde@nwlink.com says this check causes problems */
+ if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
+ return;
+#endif
+
+ if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
+ return;
+
+ set_bit(SAB82532_XPR, &up->irqflags);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ uart_write_wakeup(&up->port);
+ return;
+ }
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+
+ /* Stuff 32 bytes into Transmit FIFO. */
+ clear_bit(SAB82532_XPR, &up->irqflags);
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ sunsab_stop_tx(&up->port, 0);
+}
+
+static void check_status(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
+ uart_handle_dcd_change(&up->port,
+ !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
+ uart_handle_cts_change(&up->port,
+ (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
+
+ if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
+ up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
+ up->port.icount.dsr++;
+ }
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunsab_port *up = dev_id;
+ struct tty_struct *tty;
+ union sab82532_irq_status status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status.stat = 0;
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0)
+ status.sreg.isr0 = readb(&up->regs->r.isr0);
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1)
+ status.sreg.isr1 = readb(&up->regs->r.isr1);
+
+ tty = NULL;
+ if (status.stat) {
+ if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
+ (status.sreg.isr1 & SAB82532_ISR1_BRK))
+ tty = receive_chars(up, &status, regs);
+ if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
+ (status.sreg.isr1 & SAB82532_ISR1_CSC))
+ check_status(up, &status);
+ if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
+ transmit_chars(up, &status);
+ }
+
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ up++;
+
+ spin_lock(&up->port.lock);
+
+ status.stat = 0;
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0)
+ status.sreg.isr0 = readb(&up->regs->r.isr0);
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1)
+ status.sreg.isr1 = readb(&up->regs->r.isr1);
+
+ tty = NULL;
+ if (status.stat) {
+ if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
+ (status.sreg.isr1 & SAB82532_ISR1_BRK))
+
+ tty = receive_chars(up, &status, regs);
+ if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
+ (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC)))
+ check_status(up, &status);
+ if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
+ transmit_chars(up, &status);
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int sunsab_tx_empty(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ int ret;
+
+ /* Do not need a lock for a state test like this. */
+ if (test_bit(SAB82532_ALLS, &up->irqflags))
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* port->lock held by caller. */
+static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ if (mctrl & TIOCM_RTS) {
+ writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+ } else {
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+ }
+ if (mctrl & TIOCM_DTR) {
+ writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr);
+ } else {
+ writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr);
+ }
+}
+
+/* port->lock is not held. */
+static unsigned int sunsab_get_mctrl(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char val;
+ unsigned int result;
+
+ result = 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ val = readb(&up->regs->r.pvr);
+ result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
+
+ val = readb(&up->regs->r.vstr);
+ result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
+
+ val = readb(&up->regs->r.star);
+ result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return result;
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+}
+
+/* port->lock held by caller. */
+static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int i;
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ if (!test_bit(SAB82532_XPR, &up->irqflags))
+ return;
+
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+ clear_bit(SAB82532_XPR, &up->irqflags);
+
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+}
+
+/* port->lock is not held. */
+static void sunsab_send_xchar(struct uart_port *port, char ch)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sunsab_tec_wait(up);
+ writeb(ch, &up->regs->w.tic);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_rx(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask0 |= SAB82532_ISR0_TCD;
+ writeb(up->interrupt_mask1, &up->regs->w.imr0);
+}
+
+/* port->lock held by caller. */
+static void sunsab_enable_ms(struct uart_port *port)
+{
+ /* For now we always receive these interrupts. */
+}
+
+/* port->lock is not held. */
+static void sunsab_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char val;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ val = readb(&up->regs->rw.dafo);
+ if (break_state)
+ val |= SAB82532_DAFO_XBRK;
+ else
+ val &= ~SAB82532_DAFO_XBRK;
+ writeb(val, &up->regs->rw.dafo);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock is not held. */
+static int sunsab_startup(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char tmp;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Wait for any commands or immediate characters
+ */
+ sunsab_cec_wait(up);
+ sunsab_tec_wait(up);
+
+ /*
+ * Clear the FIFO buffers.
+ */
+ writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) readb(&up->regs->r.isr0);
+ (void) readb(&up->regs->r.isr1);
+
+ /*
+ * Now, initialize the UART
+ */
+ writeb(0, &up->regs->w.ccr0); /* power-down */
+ writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
+ SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
+ writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
+ writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
+ SAB82532_CCR2_TOE, &up->regs->w.ccr2);
+ writeb(0, &up->regs->w.ccr3);
+ writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
+ writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+ SAB82532_MODE_RAC, &up->regs->w.mode);
+ writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
+
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp |= SAB82532_CCR0_PU; /* power-up */
+ writeb(tmp, &up->regs->rw.ccr0);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA);
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ set_bit(SAB82532_XPR, &up->irqflags);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+/* port->lock is not held. */
+static void sunsab_shutdown(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char tmp;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Disable Interrupts */
+ up->interrupt_mask0 = 0xff;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = 0xff;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ /* Disable break condition */
+ tmp = readb(&up->regs->rw.dafo);
+ tmp &= ~SAB82532_DAFO_XBRK;
+ writeb(tmp, &up->regs->rw.dafo);
+
+ /* Disable Receiver */
+ tmp = readb(&up->regs->rw.mode);
+ tmp &= ~SAB82532_MODE_RAC;
+ writeb(tmp, &up->regs->rw.mode);
+
+ /*
+ * XXX FIXME
+ *
+ * If the chip is powered down here the system hangs/crashes during
+ * reboot or shutdown. This needs to be investigated further,
+ * similar behaviour occurs in 2.4 when the driver is configured
+ * as a module only. One hint may be that data is sometimes
+ * transmitted at 9600 baud during shutdown (regardless of the
+ * speed the chip was configured for when the port was open).
+ */
+#if 0
+ /* Power Down */
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp &= ~SAB82532_CCR0_PU;
+ writeb(tmp, &up->regs->rw.ccr0);
+#endif
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * This is used to figure out the divisor speeds.
+ *
+ * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
+ *
+ * with 0 <= N < 64 and 0 <= M < 16
+ */
+
+static void calc_ebrg(int baud, int *n_ret, int *m_ret)
+{
+ int n, m;
+
+ if (baud == 0) {
+ *n_ret = 0;
+ *m_ret = 0;
+ return;
+ }
+
+ /*
+ * We scale numbers by 10 so that we get better accuracy
+ * without having to use floating point. Here we increment m
+ * until n is within the valid range.
+ */
+ n = (SAB_BASE_BAUD * 10) / baud;
+ m = 0;
+ while (n >= 640) {
+ n = n / 2;
+ m++;
+ }
+ n = (n+5) / 10;
+ /*
+ * We try very hard to avoid speeds with M == 0 since they may
+ * not work correctly for XTAL frequences above 10 MHz.
+ */
+ if ((m == 0) && ((n & 1) == 0)) {
+ n = n / 2;
+ m++;
+ }
+ *n_ret = n - 1;
+ *m_ret = m;
+}
+
+/* Internal routine, port->lock is held and local interrupts are disabled. */
+static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
+ unsigned int iflag, int baud)
+{
+ unsigned int ebrg;
+ unsigned char dafo;
+ int bits, n, m;
+
+ /* Byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
+ case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
+ case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ }
+
+ if (cflag & CSTOPB) {
+ dafo |= SAB82532_DAFO_STOP;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ dafo |= SAB82532_DAFO_PARE;
+ bits++;
+ }
+
+ if (cflag & PARODD) {
+ dafo |= SAB82532_DAFO_PAR_ODD;
+ } else {
+ dafo |= SAB82532_DAFO_PAR_EVEN;
+ }
+
+ calc_ebrg(baud, &n, &m);
+
+ ebrg = n | (m << 6);
+
+ up->tec_timeout = (10 * 1000000) / baud;
+ up->cec_timeout = up->tec_timeout >> 2;
+
+ /* CTS flow control flags */
+ /* We encode read_status_mask and ignore_status_mask like so:
+ *
+ * ---------------------
+ * | ... | ISR1 | ISR0 |
+ * ---------------------
+ * .. 15 8 7 0
+ */
+
+ up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
+ SAB82532_ISR0_CDSC);
+ up->port.read_status_mask |= (SAB82532_ISR1_CSC |
+ SAB82532_ISR1_ALLS |
+ SAB82532_ISR1_XPR) << 8;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
+ SAB82532_ISR0_TCD);
+
+ /* Now bang the new settings into the chip. */
+ sunsab_cec_wait(up);
+ sunsab_tec_wait(up);
+ writeb(dafo, &up->regs->w.dafo);
+ writeb(ebrg & 0xff, &up->regs->w.bgr);
+ writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0),
+ &up->regs->rw.ccr2);
+
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode);
+
+}
+
+/* port->lock is not held. */
+static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunsab_type(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (void *)port;
+ static char buf[36];
+
+ sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
+ return buf;
+}
+
+static void sunsab_release_port(struct uart_port *port)
+{
+}
+
+static int sunsab_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sunsab_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sunsab_pops = {
+ .tx_empty = sunsab_tx_empty,
+ .set_mctrl = sunsab_set_mctrl,
+ .get_mctrl = sunsab_get_mctrl,
+ .stop_tx = sunsab_stop_tx,
+ .start_tx = sunsab_start_tx,
+ .send_xchar = sunsab_send_xchar,
+ .stop_rx = sunsab_stop_rx,
+ .enable_ms = sunsab_enable_ms,
+ .break_ctl = sunsab_break_ctl,
+ .startup = sunsab_startup,
+ .shutdown = sunsab_shutdown,
+ .set_termios = sunsab_set_termios,
+ .type = sunsab_type,
+ .release_port = sunsab_release_port,
+ .request_port = sunsab_request_port,
+ .config_port = sunsab_config_port,
+ .verify_port = sunsab_verify_port,
+};
+
+static struct uart_driver sunsab_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static struct uart_sunsab_port *sunsab_ports;
+static int num_channels;
+
+#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
+
+static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sunsab_tec_wait(up);
+ writeb(c, &up->regs->w.tic);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void sunsab_console_write(struct console *con, const char *s, unsigned n)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ int i;
+
+ for (i = 0; i < n; i++) {
+ if (*s == '\n')
+ sunsab_console_putchar(up, '\r');
+ sunsab_console_putchar(up, *s++);
+ }
+ sunsab_tec_wait(up);
+}
+
+static int sunsab_console_setup(struct console *con, char *options)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ unsigned long flags;
+ int baud;
+
+ printk("Console: ttyS%d (SAB82532)\n",
+ (sunsab_reg.minor - 64) + con->index);
+
+ sunserial_console_termios(con);
+
+ /* Firmware console speed is limited to 150-->38400 baud so
+ * this hackish cflag thing is OK.
+ */
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ };
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&up->port.lock);
+
+ /*
+ * Initialize the hardware
+ */
+ sunsab_startup(&up->port);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ sunsab_convert_to_sab(up, con->cflag, 0, baud);
+ sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct console sunsab_console = {
+ .name = "ttyS",
+ .write = sunsab_console_write,
+ .device = uart_console_device,
+ .setup = sunsab_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunsab_reg,
+};
+#define SUNSAB_CONSOLE (&sunsab_console)
+
+static void __init sunsab_console_init(void)
+{
+ int i;
+
+ if (con_is_present())
+ return;
+
+ for (i = 0; i < num_channels; i++) {
+ int this_minor = sunsab_reg.minor + i;
+
+ if ((this_minor - 64) == (serial_console - 1))
+ break;
+ }
+ if (i == num_channels)
+ return;
+
+ sunsab_console.index = i;
+ register_console(&sunsab_console);
+}
+#else
+#define SUNSAB_CONSOLE (NULL)
+#define sunsab_console_init() do { } while (0)
+#endif
+
+static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg)
+{
+ struct linux_ebus *ebus;
+ struct linux_ebus_device *edev = NULL;
+
+ for_each_ebus(ebus) {
+ for_each_ebusdev(edev, ebus) {
+ if (!strcmp(edev->prom_name, "se")) {
+ callback(edev, arg);
+ continue;
+ } else if (!strcmp(edev->prom_name, "serial")) {
+ char compat[32];
+ int clen;
+
+ /* On RIO this can be an SE, check it. We could
+ * just check ebus->is_rio, but this is more portable.
+ */
+ clen = prom_getproperty(edev->prom_node, "compatible",
+ compat, sizeof(compat));
+ if (clen > 0) {
+ if (strncmp(compat, "sab82532", 8) == 0) {
+ callback(edev, arg);
+ continue;
+ }
+ }
+ }
+ }
+ }
+}
+
+static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg)
+{
+ int *count_p = arg;
+
+ (*count_p)++;
+}
+
+static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg)
+{
+ int *instance_p = arg;
+ struct uart_sunsab_port *up;
+ unsigned long regs, offset;
+ int i;
+
+ /* Note: ports are located in reverse order */
+ regs = edev->resource[0].start;
+ offset = sizeof(union sab82532_async_regs);
+ for (i = 0; i < 2; i++) {
+ up = &sunsab_ports[(*instance_p * 2) + 1 - i];
+
+ memset(up, 0, sizeof(*up));
+ up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs));
+ up->port.irq = edev->irqs[0];
+ up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
+ up->port.mapbase = (unsigned long)up->regs;
+ up->port.iotype = SERIAL_IO_MEM;
+
+ writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
+
+ offset -= sizeof(union sab82532_async_regs);
+ }
+
+ (*instance_p)++;
+}
+
+static int __init probe_for_sabs(void)
+{
+ int this_sab = 0;
+
+ /* Find device instances. */
+ for_each_sab_edev(&sab_count_callback, &this_sab);
+ if (!this_sab)
+ return -ENODEV;
+
+ /* Allocate tables. */
+ sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2,
+ GFP_KERNEL);
+ if (!sunsab_ports)
+ return -ENOMEM;
+
+ num_channels = this_sab * 2;
+
+ this_sab = 0;
+ for_each_sab_edev(&sab_attach_callback, &this_sab);
+ return 0;
+}
+
+static void __init sunsab_init_hw(void)
+{
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &sunsab_pops;
+ up->port.type = PORT_SUNSAB;
+ up->port.uartclk = SAB_BASE_BAUD;
+
+ up->type = readb(&up->regs->r.vstr) & 0x0f;
+ writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
+ writeb(0xff, &up->regs->w.pim);
+ if (up->port.line == 0) {
+ up->pvr_dsr_bit = (1 << 0);
+ up->pvr_dtr_bit = (1 << 1);
+ } else {
+ up->pvr_dsr_bit = (1 << 3);
+ up->pvr_dtr_bit = (1 << 2);
+ }
+ writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+
+ up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
+ up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
+
+ if (!(up->port.line & 0x01)) {
+ if (request_irq(up->port.irq, sunsab_interrupt,
+ SA_SHIRQ, "serial(sab82532)", up)) {
+ printk("sunsab%d: can't get IRQ %x\n",
+ i, up->port.irq);
+ continue;
+ }
+ }
+ }
+}
+
+static int __init sunsab_init(void)
+{
+ int ret = probe_for_sabs();
+ int i;
+
+ if (ret < 0)
+ return ret;
+
+ sunsab_init_hw();
+
+ sunsab_reg.minor = sunserial_current_minor;
+ sunsab_reg.nr = num_channels;
+ sunsab_reg.cons = SUNSAB_CONSOLE;
+
+ ret = uart_register_driver(&sunsab_reg);
+ if (ret < 0) {
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ if (!(up->port.line & 0x01))
+ free_irq(up->port.irq, up);
+ iounmap(up->regs);
+ }
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+
+ return ret;
+ }
+
+ sunserial_current_minor += num_channels;
+
+ sunsab_console_init();
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ uart_add_one_port(&sunsab_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static void __exit sunsab_exit(void)
+{
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ uart_remove_one_port(&sunsab_reg, &up->port);
+
+ if (!(up->port.line & 0x01))
+ free_irq(up->port.irq, up);
+ iounmap(up->regs);
+ }
+
+ sunserial_current_minor -= num_channels;
+ uart_unregister_driver(&sunsab_reg);
+
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+}
+
+module_init(sunsab_init);
+module_exit(sunsab_exit);
+
+MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
+MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud