summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sn_console.c
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2005-08-31 10:12:14 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2005-08-31 10:12:14 +0100
commitb129a8ccd53f74c43e4c83c8e0031a4990040830 (patch)
tree4c40afd836be87166d6d014380262f1baa19694f /drivers/serial/sn_console.c
parent6b39374a27eb4be7e9d82145ae270ba02ea90dc8 (diff)
parent194d0710e1a7fe92dcf860ddd31fded8c3103b7a (diff)
downloadop-kernel-dev-b129a8ccd53f74c43e4c83c8e0031a4990040830.zip
op-kernel-dev-b129a8ccd53f74c43e4c83c8e0031a4990040830.tar.gz
[SERIAL] Clean up and fix tty transmission start/stoping
The start_tx and stop_tx methods were passed a flag to indicate whether the start/stop was from the tty start/stop callbacks, and some drivers used this flag to decide whether to ask the UART to immediately stop transmission (where the UART supports such a feature.) There are other cases when we wish this to occur - when CTS is lowered, or if we change from soft to hard flow control and CTS is inactive. In these cases, this flag was false, and we would allow the transmitter to drain before stopping. There is really only one case where we want to let the transmitter drain before disabling, and that's when we run out of characters to send. Hence, re-jig the start_tx and stop_tx methods to eliminate this flag, and introduce new functions for the special "disable and allow transmitter to drain" case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/sn_console.c')
-rw-r--r--drivers/serial/sn_console.c8
1 files changed, 3 insertions, 5 deletions
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 12d1f14..313f9df 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -259,10 +259,9 @@ static unsigned int snp_tx_empty(struct uart_port *port)
/**
* snp_stop_tx - stop the transmitter - no-op for us
* @port: Port to operat eon - we ignore - no-op function
- * @tty_stop: Set to 1 if called via uart_stop
*
*/
-static void snp_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void snp_stop_tx(struct uart_port *port)
{
}
@@ -325,10 +324,9 @@ static void snp_stop_rx(struct uart_port *port)
/**
* snp_start_tx - Start transmitter
* @port: Port to operate on
- * @tty_stop: Set to 1 if called via uart_start
*
*/
-static void snp_start_tx(struct uart_port *port, unsigned int tty_stop)
+static void snp_start_tx(struct uart_port *port)
{
if (sal_console_port.sc_ops->sal_wakeup_transmit)
sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port,
@@ -615,7 +613,7 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
uart_write_wakeup(&port->sc_port);
if (uart_circ_empty(xmit))
- snp_stop_tx(&port->sc_port, 0); /* no-op for us */
+ snp_stop_tx(&port->sc_port); /* no-op for us */
}
/**
OpenPOWER on IntegriCloud