tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 879 deletions

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
deleted file mode 100644
index 1102a39..0000000
--- a/drivers/serial/pxa.c
+++ /dev/null
@@ -1,879 +0,0 @@
-/*
- *  linux/drivers/serial/pxa.c
- *
- *  Based on drivers/serial/8250.c by Russell King.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Feb 20, 2003
- *  Copyright:	(C) 2003 Monta Vista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Note 1: This driver is made separate from the already too overloaded
- * 8250.c because it needs some kirks of its own and that'll make it
- * easier to add DMA support.
- *
- * Note 2: I'm too sick of device allocation policies for serial ports.
- * If someone else wants to request an "official" allocation of major/minor
- * for this driver please be my guest.  And don't forget that new hardware
- * to come from Intel might have more than 3 or 4 of those UARTs.  Let's
- * hope for a better port registration and dynamic device allocation scheme
- * with the serial core maintainer satisfaction to appear soon.
- */
-
-
-#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial_reg.h>
-#include <linux/circ_buf.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-struct uart_pxa_port {
-	struct uart_port        port;
-	unsigned char           ier;
-	unsigned char           lcr;
-	unsigned char           mcr;
-	unsigned int            lsr_break_flag;
-	struct clk		*clk;
-	char			*name;
-};
-
-static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
-{
-	offset <<= 2;
-	return readl(up->port.membase + offset);
-}
-
-static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
-{
-	offset <<= 2;
-	writel(value, up->port.membase + offset);
-}
-
-static void serial_pxa_enable_ms(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	up->ier |= UART_IER_MSI;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void serial_pxa_stop_tx(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static void serial_pxa_stop_rx(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	up->ier &= ~UART_IER_RLSI;
-	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static inline void receive_chars(struct uart_pxa_port *up, int *status)
-{
-	struct tty_struct *tty = up->port.state->port.tty;
-	unsigned int ch, flag;
-	int max_count = 256;
-
-	do {
-		ch = serial_in(up, UART_RX);
-		flag = TTY_NORMAL;
-		up->port.icount.rx++;
-
-		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
-				       UART_LSR_FE | UART_LSR_OE))) {
-			/*
-			 * For statistics only
-			 */
-			if (*status & UART_LSR_BI) {
-				*status &= ~(UART_LSR_FE | UART_LSR_PE);
-				up->port.icount.brk++;
-				/*
-				 * We do the SysRQ and SAK checking
-				 * here because otherwise the break
-				 * may get masked by ignore_status_mask
-				 * or read_status_mask.
-				 */
-				if (uart_handle_break(&up->port))
-					goto ignore_char;
-			} else if (*status & UART_LSR_PE)
-				up->port.icount.parity++;
-			else if (*status & UART_LSR_FE)
-				up->port.icount.frame++;
-			if (*status & UART_LSR_OE)
-				up->port.icount.overrun++;
-
-			/*
-			 * Mask off conditions which should be ignored.
-			 */
-			*status &= up->port.read_status_mask;
-
-#ifdef CONFIG_SERIAL_PXA_CONSOLE
-			if (up->port.line == up->port.cons->index) {
-				/* Recover the break flag from console xmit */
-				*status |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
-			}
-#endif
-			if (*status & UART_LSR_BI) {
-				flag = TTY_BREAK;
-			} else if (*status & UART_LSR_PE)
-				flag = TTY_PARITY;
-			else if (*status & UART_LSR_FE)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char(&up->port, ch))
-			goto ignore_char;
-
-		uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
-
-	ignore_char:
-		*status = serial_in(up, UART_LSR);
-	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
-	tty_flip_buffer_push(tty);
-}
-
-static void transmit_chars(struct uart_pxa_port *up)
-{
-	struct circ_buf *xmit = &up->port.state->xmit;
-	int count;
-
-	if (up->port.x_char) {
-		serial_out(up, UART_TX, up->port.x_char);
-		up->port.icount.tx++;
-		up->port.x_char = 0;
-		return;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		serial_pxa_stop_tx(&up->port);
-		return;
-	}
-
-	count = up->port.fifosize / 2;
-	do {
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		up->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (--count > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&up->port);
-
-
-	if (uart_circ_empty(xmit))
-		serial_pxa_stop_tx(&up->port);
-}
-
-static void serial_pxa_start_tx(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static inline void check_modem_status(struct uart_pxa_port *up)
-{
-	int status;
-
-	status = serial_in(up, UART_MSR);
-
-	if ((status & UART_MSR_ANY_DELTA) == 0)
-		return;
-
-	if (status & UART_MSR_TERI)
-		up->port.icount.rng++;
-	if (status & UART_MSR_DDSR)
-		up->port.icount.dsr++;
-	if (status & UART_MSR_DDCD)
-		uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
-	if (status & UART_MSR_DCTS)
-		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
-
-	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
-{
-	struct uart_pxa_port *up = dev_id;
-	unsigned int iir, lsr;
-
-	iir = serial_in(up, UART_IIR);
-	if (iir & UART_IIR_NO_INT)
-		return IRQ_NONE;
-	lsr = serial_in(up, UART_LSR);
-	if (lsr & UART_LSR_DR)
-		receive_chars(up, &lsr);
-	check_modem_status(up);
-	if (lsr & UART_LSR_THRE)
-		transmit_chars(up);
-	return IRQ_HANDLED;
-}
-
-static unsigned int serial_pxa_tx_empty(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret;
-}
-
-static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned char status;
-	unsigned int ret;
-
-	status = serial_in(up, UART_MSR);
-
-	ret = 0;
-	if (status & UART_MSR_DCD)
-		ret |= TIOCM_CAR;
-	if (status & UART_MSR_RI)
-		ret |= TIOCM_RNG;
-	if (status & UART_MSR_DSR)
-		ret |= TIOCM_DSR;
-	if (status & UART_MSR_CTS)
-		ret |= TIOCM_CTS;
-	return ret;
-}
-
-static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned char mcr = 0;
-
-	if (mctrl & TIOCM_RTS)
-		mcr |= UART_MCR_RTS;
-	if (mctrl & TIOCM_DTR)
-		mcr |= UART_MCR_DTR;
-	if (mctrl & TIOCM_OUT1)
-		mcr |= UART_MCR_OUT1;
-	if (mctrl & TIOCM_OUT2)
-		mcr |= UART_MCR_OUT2;
-	if (mctrl & TIOCM_LOOP)
-		mcr |= UART_MCR_LOOP;
-
-	mcr |= up->mcr;
-
-	serial_out(up, UART_MCR, mcr);
-}
-
-static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	if (break_state == -1)
-		up->lcr |= UART_LCR_SBC;
-	else
-		up->lcr &= ~UART_LCR_SBC;
-	serial_out(up, UART_LCR, up->lcr);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-#if 0
-static void serial_pxa_dma_init(struct pxa_uart *up)
-{
-	up->rxdma =
-		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
-	if (up->rxdma < 0)
-		goto out;
-	up->txdma =
-		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
-	if (up->txdma < 0)
-		goto err_txdma;
-	up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
-	if (!up->dmadesc)
-		goto err_alloc;
-
-	/* ... */
-err_alloc:
-	pxa_free_dma(up->txdma);
-err_rxdma:
-	pxa_free_dma(up->rxdma);
-out:
-	return;
-}
-#endif
-
-static int serial_pxa_startup(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
-	int retval;
-
-	if (port->line == 3) /* HWUART */
-		up->mcr |= UART_MCR_AFE;
-	else
-		up->mcr = 0;
-
-	up->port.uartclk = clk_get_rate(up->clk);
-
-	/*
-	 * Allocate the IRQ
-	 */
-	retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
-	if (retval)
-		return retval;
-
-	/*
-	 * Clear the FIFO buffers and disable them.
-	 * (they will be reenabled in set_termios())
-	 */
-	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
-			UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-	serial_out(up, UART_FCR, 0);
-
-	/*
-	 * Clear the interrupt registers.
-	 */
-	(void) serial_in(up, UART_LSR);
-	(void) serial_in(up, UART_RX);
-	(void) serial_in(up, UART_IIR);
-	(void) serial_in(up, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(up, UART_LCR, UART_LCR_WLEN8);
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	up->port.mctrl |= TIOCM_OUT2;
-	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	/*
-	 * Finally, enable interrupts.  Note: Modem status interrupts
-	 * are set via set_termios(), which will be occurring imminently
-	 * anyway, so we don't enable them here.
-	 */
-	up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
-	serial_out(up, UART_IER, up->ier);
-
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	(void) serial_in(up, UART_LSR);
-	(void) serial_in(up, UART_RX);
-	(void) serial_in(up, UART_IIR);
-	(void) serial_in(up, UART_MSR);
-
-	return 0;
-}
-
-static void serial_pxa_shutdown(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
-
-	free_irq(up->port.irq, up);
-
-	/*
-	 * Disable interrupts from this port
-	 */
-	up->ier = 0;
-	serial_out(up, UART_IER, 0);
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	up->port.mctrl &= ~TIOCM_OUT2;
-	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	/*
-	 * Disable break condition and FIFOs
-	 */
-	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
-	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
-				  UART_FCR_CLEAR_RCVR |
-				  UART_FCR_CLEAR_XMIT);
-	serial_out(up, UART_FCR, 0);
-}
-
-static void
-serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
-		       struct ktermios *old)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned char cval, fcr = 0;
-	unsigned long flags;
-	unsigned int baud, quot;
-	unsigned int dll;
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		cval = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		cval = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		cval = UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		cval = UART_LCR_WLEN8;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		cval |= UART_LCR_STOP;
-	if (termios->c_cflag & PARENB)
-		cval |= UART_LCR_PARITY;
-	if (!(termios->c_cflag & PARODD))
-		cval |= UART_LCR_EPAR;
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	if ((up->port.uartclk / quot) < (2400 * 16))
-		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
-	else if ((up->port.uartclk / quot) < (230400 * 16))
-		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
-	else
-		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
-
-	/*
-	 * Ok, we're now changing the port state.  Do it with
-	 * interrupts disabled.
-	 */
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	/*
-	 * Ensure the port will be enabled.
-	 * This is required especially for serial console.
-	 */
-	up->ier |= UART_IER_UUE;
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-	if (termios->c_iflag & INPCK)
-		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		up->port.read_status_mask |= UART_LSR_BI;
-
-	/*
-	 * Characters to ignore
-	 */
-	up->port.ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-	if (termios->c_iflag & IGNBRK) {
-		up->port.ignore_status_mask |= UART_LSR_BI;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			up->port.ignore_status_mask |= UART_LSR_OE;
-	}
-
-	/*
-	 * ignore all characters if CREAD is not set
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		up->port.ignore_status_mask |= UART_LSR_DR;
-
-	/*
-	 * CTS flow control flag and modem status interrupts
-	 */
-	up->ier &= ~UART_IER_MSI;
-	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
-		up->ier |= UART_IER_MSI;
-
-	serial_out(up, UART_IER, up->ier);
-
-	if (termios->c_cflag & CRTSCTS)
-		up->mcr |= UART_MCR_AFE;
-	else
-		up->mcr &= ~UART_MCR_AFE;
-
-	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);	/* set DLAB */
-	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
-
-	/*
-	 * work around Errata #75 according to Intel(R) PXA27x Processor Family
-	 * Specification Update (Nov 2005)
-	 */
-	dll = serial_in(up, UART_DLL);
-	WARN_ON(dll != (quot & 0xff));
-
-	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
-	serial_out(up, UART_LCR, cval);			/* reset DLAB */
-	up->lcr = cval;					/* Save LCR */
-	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
-	serial_out(up, UART_FCR, fcr);
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static void
-serial_pxa_pm(struct uart_port *port, unsigned int state,
-	      unsigned int oldstate)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	if (!state)
-		clk_enable(up->clk);
-	else
-		clk_disable(up->clk);
-}
-
-static void serial_pxa_release_port(struct uart_port *port)
-{
-}
-
-static int serial_pxa_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void serial_pxa_config_port(struct uart_port *port, int flags)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	up->port.type = PORT_PXA;
-}
-
-static int
-serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	/* we don't want the core code to modify any port params */
-	return -EINVAL;
-}
-
-static const char *
-serial_pxa_type(struct uart_port *port)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	return up->name;
-}
-
-static struct uart_pxa_port *serial_pxa_ports[4];
-static struct uart_driver serial_pxa_reg;
-
-#ifdef CONFIG_SERIAL_PXA_CONSOLE
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-/*
- *	Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_pxa_port *up)
-{
-	unsigned int status, tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
-		status = serial_in(up, UART_LSR);
-
-		if (status & UART_LSR_BI)
-			up->lsr_break_flag = UART_LSR_BI;
-
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
-
-	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
-		tmout = 1000000;
-		while (--tmout &&
-		       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
-			udelay(1);
-	}
-}
-
-static void serial_pxa_console_putchar(struct uart_port *port, int ch)
-{
-	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-
-	wait_for_xmitr(up);
-	serial_out(up, UART_TX, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- *	The console_lock must be held when we get here.
- */
-static void
-serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct uart_pxa_port *up = serial_pxa_ports[co->index];
-	unsigned int ier;
-
-	clk_enable(up->clk);
-
-	/*
-	 *	First save the IER then disable the interrupts
-	 */
-	ier = serial_in(up, UART_IER);
-	serial_out(up, UART_IER, UART_IER_UUE);
-
-	uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
-
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore the IER
-	 */
-	wait_for_xmitr(up);
-	serial_out(up, UART_IER, ier);
-
-	clk_disable(up->clk);
-}
-
-static int __init
-serial_pxa_console_setup(struct console *co, char *options)
-{
-	struct uart_pxa_port *up;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index == -1 || co->index >= serial_pxa_reg.nr)
-		co->index = 0;
-	up = serial_pxa_ports[co->index];
-	if (!up)
-		return -ENODEV;
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(&up->port, co, baud, parity, bits, flow);
-}
-
-static struct console serial_pxa_console = {
-	.name		= "ttyS",
-	.write		= serial_pxa_console_write,
-	.device		= uart_console_device,
-	.setup		= serial_pxa_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &serial_pxa_reg,
-};
-
-#define PXA_CONSOLE	&serial_pxa_console
-#else
-#define PXA_CONSOLE	NULL
-#endif
-
-struct uart_ops serial_pxa_pops = {
-	.tx_empty	= serial_pxa_tx_empty,
-	.set_mctrl	= serial_pxa_set_mctrl,
-	.get_mctrl	= serial_pxa_get_mctrl,
-	.stop_tx	= serial_pxa_stop_tx,
-	.start_tx	= serial_pxa_start_tx,
-	.stop_rx	= serial_pxa_stop_rx,
-	.enable_ms	= serial_pxa_enable_ms,
-	.break_ctl	= serial_pxa_break_ctl,
-	.startup	= serial_pxa_startup,
-	.shutdown	= serial_pxa_shutdown,
-	.set_termios	= serial_pxa_set_termios,
-	.pm		= serial_pxa_pm,
-	.type		= serial_pxa_type,
-	.release_port	= serial_pxa_release_port,
-	.request_port	= serial_pxa_request_port,
-	.config_port	= serial_pxa_config_port,
-	.verify_port	= serial_pxa_verify_port,
-};
-
-static struct uart_driver serial_pxa_reg = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "PXA serial",
-	.dev_name	= "ttyS",
-	.major		= TTY_MAJOR,
-	.minor		= 64,
-	.nr		= 4,
-	.cons		= PXA_CONSOLE,
-};
-
-#ifdef CONFIG_PM
-static int serial_pxa_suspend(struct device *dev)
-{
-        struct uart_pxa_port *sport = dev_get_drvdata(dev);
-
-        if (sport)
-                uart_suspend_port(&serial_pxa_reg, &sport->port);
-
-        return 0;
-}
-
-static int serial_pxa_resume(struct device *dev)
-{
-        struct uart_pxa_port *sport = dev_get_drvdata(dev);
-
-        if (sport)
-                uart_resume_port(&serial_pxa_reg, &sport->port);
-
-        return 0;
-}
-
-static const struct dev_pm_ops serial_pxa_pm_ops = {
-	.suspend	= serial_pxa_suspend,
-	.resume		= serial_pxa_resume,
-};
-#endif
-
-static int serial_pxa_probe(struct platform_device *dev)
-{
-	struct uart_pxa_port *sport;
-	struct resource *mmres, *irqres;
-	int ret;
-
-	mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-	if (!mmres || !irqres)
-		return -ENODEV;
-
-	sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
-	if (!sport)
-		return -ENOMEM;
-
-	sport->clk = clk_get(&dev->dev, NULL);
-	if (IS_ERR(sport->clk)) {
-		ret = PTR_ERR(sport->clk);
-		goto err_free;
-	}
-
-	sport->port.type = PORT_PXA;
-	sport->port.iotype = UPIO_MEM;
-	sport->port.mapbase = mmres->start;
-	sport->port.irq = irqres->start;
-	sport->port.fifosize = 64;
-	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
-	sport->port.dev = &dev->dev;
-	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-	sport->port.uartclk = clk_get_rate(sport->clk);
-
-	switch (dev->id) {
-	case 0: sport->name = "FFUART"; break;
-	case 1: sport->name = "BTUART"; break;
-	case 2: sport->name = "STUART"; break;
-	case 3: sport->name = "HWUART"; break;
-	default:
-		sport->name = "???";
-		break;
-	}
-
-	sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
-	if (!sport->port.membase) {
-		ret = -ENOMEM;
-		goto err_clk;
-	}
-
-	serial_pxa_ports[dev->id] = sport;
-
-	uart_add_one_port(&serial_pxa_reg, &sport->port);
-	platform_set_drvdata(dev, sport);
-
-	return 0;
-
- err_clk:
-	clk_put(sport->clk);
- err_free:
-	kfree(sport);
-	return ret;
-}
-
-static int serial_pxa_remove(struct platform_device *dev)
-{
-	struct uart_pxa_port *sport = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	uart_remove_one_port(&serial_pxa_reg, &sport->port);
-	clk_put(sport->clk);
-	kfree(sport);
-
-	return 0;
-}
-
-static struct platform_driver serial_pxa_driver = {
-        .probe          = serial_pxa_probe,
-        .remove         = serial_pxa_remove,
-
-	.driver		= {
-	        .name	= "pxa2xx-uart",
-		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
-		.pm	= &serial_pxa_pm_ops,
-#endif
-	},
-};
-
-int __init serial_pxa_init(void)
-{
-	int ret;
-
-	ret = uart_register_driver(&serial_pxa_reg);
-	if (ret != 0)
-		return ret;
-
-	ret = platform_driver_register(&serial_pxa_driver);
-	if (ret != 0)
-		uart_unregister_driver(&serial_pxa_reg);
-
-	return ret;
-}
-
-void __exit serial_pxa_exit(void)
-{
-	platform_driver_unregister(&serial_pxa_driver);
-	uart_unregister_driver(&serial_pxa_reg);
-}
-
-module_init(serial_pxa_init);
-module_exit(serial_pxa_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa2xx-uart");