summaryrefslogtreecommitdiffstats
path: root/drivers/serial/pxa.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/pxa.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/pxa.c')
-rw-r--r--drivers/serial/pxa.c877
1 files changed, 877 insertions, 0 deletions
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
new file mode 100644
index 0000000..68b25b2
--- /dev/null
+++ b/drivers/serial/pxa.c
@@ -0,0 +1,877 @@
+/*
+ * linux/drivers/serial/pxa.c
+ *
+ * Based on drivers/serial/8250.c by Russell King.
+ *
+ * Author: Nicolas Pitre
+ * Created: Feb 20, 2003
+ * Copyright: (C) 2003 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Note 1: This driver is made separate from the already too overloaded
+ * 8250.c because it needs some kirks of its own and that'll make it
+ * easier to add DMA support.
+ *
+ * Note 2: I'm too sick of device allocation policies for serial ports.
+ * If someone else wants to request an "official" allocation of major/minor
+ * for this driver please be my guest. And don't forget that new hardware
+ * to come from Intel might have more than 3 or 4 of those UARTs. Let's
+ * hope for a better port registration and dynamic device allocation scheme
+ * with the serial core maintainer satisfaction to appear soon.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/pxa-regs.h>
+
+
+struct uart_pxa_port {
+ struct uart_port port;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned int lsr_break_flag;
+ unsigned int cken;
+ char *name;
+};
+
+static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
+{
+ offset <<= 2;
+ return readl(up->port.membase + offset);
+}
+
+static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
+{
+ offset <<= 2;
+ writel(value, up->port.membase + offset);
+}
+
+static void serial_pxa_enable_ms(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial_pxa_stop_rx(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static inline void
+receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned int ch, flag;
+ int max_count = 256;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((*status & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_pxa_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_pxa_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->port.fifosize / 2;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+
+ if (uart_circ_empty(xmit))
+ serial_pxa_stop_tx(&up->port, 0);
+}
+
+static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static inline void check_modem_status(struct uart_pxa_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline irqreturn_t
+serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
+ unsigned int iir, lsr;
+
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ return IRQ_NONE;
+ lsr = serial_in(up, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr, regs);
+ check_modem_status(up);
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_pxa_tx_empty(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ unsigned char status;
+ unsigned int ret;
+
+return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ spin_lock_irqsave(&up->port.lock, flags);
+ status = serial_in(up, UART_MSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+#if 0
+static void serial_pxa_dma_init(struct pxa_uart *up)
+{
+ up->rxdma =
+ pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
+ if (up->rxdma < 0)
+ goto out;
+ up->txdma =
+ pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
+ if (up->txdma < 0)
+ goto err_txdma;
+ up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
+ if (!up->dmadesc)
+ goto err_alloc;
+
+ /* ... */
+err_alloc:
+ pxa_free_dma(up->txdma);
+err_rxdma:
+ pxa_free_dma(up->rxdma);
+out:
+ return;
+}
+#endif
+
+static int serial_pxa_startup(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ int retval;
+
+ up->mcr = 0;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
+ if (retval)
+ return retval;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl |= TIOCM_OUT2;
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occuring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ serial_out(up, UART_IER, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ return 0;
+}
+
+static void serial_pxa_shutdown(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+
+ free_irq(up->port.irq, up);
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Ensure the port will be enabled.
+ * This is required especially for serial console.
+ */
+ up->ier |= IER_UUE;
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, quot);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ serial_out(up, UART_FCR, fcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_pxa_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ pxa_set_cken(up->cken, !state);
+ if (!state)
+ udelay(1);
+}
+
+static void serial_pxa_release_port(struct uart_port *port)
+{
+}
+
+static int serial_pxa_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_pxa_config_port(struct uart_port *port, int flags)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ up->port.type = PORT_PXA;
+}
+
+static int
+serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static const char *
+serial_pxa_type(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ return up->name;
+}
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+
+extern struct uart_pxa_port serial_pxa_ports[];
+extern struct uart_driver serial_pxa_reg;
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_pxa_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_pxa_port *up = &serial_pxa_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, UART_IER_UUE);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+static int __init
+serial_pxa_console_setup(struct console *co, char *options)
+{
+ struct uart_pxa_port *up;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index == -1 || co->index >= serial_pxa_reg.nr)
+ co->index = 0;
+ up = &serial_pxa_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static struct console serial_pxa_console = {
+ .name = "ttyS",
+ .write = serial_pxa_console_write,
+ .device = uart_console_device,
+ .setup = serial_pxa_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_pxa_reg,
+};
+
+static int __init
+serial_pxa_console_init(void)
+{
+ register_console(&serial_pxa_console);
+ return 0;
+}
+
+console_initcall(serial_pxa_console_init);
+
+#define PXA_CONSOLE &serial_pxa_console
+#else
+#define PXA_CONSOLE NULL
+#endif
+
+struct uart_ops serial_pxa_pops = {
+ .tx_empty = serial_pxa_tx_empty,
+ .set_mctrl = serial_pxa_set_mctrl,
+ .get_mctrl = serial_pxa_get_mctrl,
+ .stop_tx = serial_pxa_stop_tx,
+ .start_tx = serial_pxa_start_tx,
+ .stop_rx = serial_pxa_stop_rx,
+ .enable_ms = serial_pxa_enable_ms,
+ .break_ctl = serial_pxa_break_ctl,
+ .startup = serial_pxa_startup,
+ .shutdown = serial_pxa_shutdown,
+ .set_termios = serial_pxa_set_termios,
+ .pm = serial_pxa_pm,
+ .type = serial_pxa_type,
+ .release_port = serial_pxa_release_port,
+ .request_port = serial_pxa_request_port,
+ .config_port = serial_pxa_config_port,
+ .verify_port = serial_pxa_verify_port,
+};
+
+static struct uart_pxa_port serial_pxa_ports[] = {
+ { /* FFUART */
+ .name = "FFUART",
+ .cken = CKEN6_FFUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 0,
+ },
+ }, { /* BTUART */
+ .name = "BTUART",
+ .cken = CKEN7_BTUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 1,
+ },
+ }, { /* STUART */
+ .name = "STUART",
+ .cken = CKEN5_STUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 2,
+ },
+ }
+};
+
+static struct uart_driver serial_pxa_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "PXA serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = ARRAY_SIZE(serial_pxa_ports),
+ .cons = PXA_CONSOLE,
+};
+
+static int serial_pxa_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_pxa_resume(struct device *_dev, u32 level)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == RESUME_ENABLE)
+ uart_resume_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_pxa_probe(struct device *_dev)
+{
+ struct platform_device *dev = to_platform_device(_dev);
+
+ serial_pxa_ports[dev->id].port.dev = _dev;
+ uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
+ dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]);
+ return 0;
+}
+
+static int serial_pxa_remove(struct device *_dev)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ dev_set_drvdata(_dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static struct device_driver serial_pxa_driver = {
+ .name = "pxa2xx-uart",
+ .bus = &platform_bus_type,
+ .probe = serial_pxa_probe,
+ .remove = serial_pxa_remove,
+
+ .suspend = serial_pxa_suspend,
+ .resume = serial_pxa_resume,
+};
+
+int __init serial_pxa_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&serial_pxa_reg);
+ if (ret != 0)
+ return ret;
+
+ ret = driver_register(&serial_pxa_driver);
+ if (ret != 0)
+ uart_unregister_driver(&serial_pxa_reg);
+
+ return ret;
+}
+
+void __exit serial_pxa_exit(void)
+{
+ driver_unregister(&serial_pxa_driver);
+ uart_unregister_driver(&serial_pxa_reg);
+}
+
+module_init(serial_pxa_init);
+module_exit(serial_pxa_exit);
+
+MODULE_LICENSE("GPL");
+
OpenPOWER on IntegriCloud