tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 201 deletions

diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
deleted file mode 100644
index 5c7abe4..0000000
--- a/drivers/serial/of_serial.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *  Serial Port driver for Open Firmware platform devices
- *
- *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/nwpserial.h>
-
-struct of_serial_info {
-	int type;
-	int line;
-};
-
-/*
- * Fill a struct uart_port for a given device node
- */
-static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
-					int type, struct uart_port *port)
-{
-	struct resource resource;
-	struct device_node *np = ofdev->dev.of_node;
-	const __be32 *clk, *spd;
-	const __be32 *prop;
-	int ret, prop_size;
-
-	memset(port, 0, sizeof *port);
-	spd = of_get_property(np, "current-speed", NULL);
-	clk = of_get_property(np, "clock-frequency", NULL);
-	if (!clk) {
-		dev_warn(&ofdev->dev, "no clock-frequency property set\n");
-		return -ENODEV;
-	}
-
-	ret = of_address_to_resource(np, 0, &resource);
-	if (ret) {
-		dev_warn(&ofdev->dev, "invalid address\n");
-		return ret;
-	}
-
-	spin_lock_init(&port->lock);
-	port->mapbase = resource.start;
-
-	/* Check for shifted address mapping */
-	prop = of_get_property(np, "reg-offset", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		port->mapbase += be32_to_cpup(prop);
-
-	/* Check for registers offset within the devices address range */
-	prop = of_get_property(np, "reg-shift", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		port->regshift = be32_to_cpup(prop);
-
-	port->irq = irq_of_parse_and_map(np, 0);
-	port->iotype = UPIO_MEM;
-	port->type = type;
-	port->uartclk = be32_to_cpup(clk);
-	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
-		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
-	port->dev = &ofdev->dev;
-	/* If current-speed was set, then try not to change it. */
-	if (spd)
-		port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd)));
-
-	return 0;
-}
-
-/*
- * Try to register a serial port
- */
-static int __devinit of_platform_serial_probe(struct platform_device *ofdev,
-						const struct of_device_id *id)
-{
-	struct of_serial_info *info;
-	struct uart_port port;
-	int port_type;
-	int ret;
-
-	if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
-		return -EBUSY;
-
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL)
-		return -ENOMEM;
-
-	port_type = (unsigned long)id->data;
-	ret = of_platform_serial_setup(ofdev, port_type, &port);
-	if (ret)
-		goto out;
-
-	switch (port_type) {
-#ifdef CONFIG_SERIAL_8250
-	case PORT_8250 ... PORT_MAX_8250:
-		ret = serial8250_register_port(&port);
-		break;
-#endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		ret = nwpserial_register_port(&port);
-		break;
-#endif
-	default:
-		/* need to add code for these */
-	case PORT_UNKNOWN:
-		dev_info(&ofdev->dev, "Unknown serial port found, ignored\n");
-		ret = -ENODEV;
-		break;
-	}
-	if (ret < 0)
-		goto out;
-
-	info->type = port_type;
-	info->line = ret;
-	dev_set_drvdata(&ofdev->dev, info);
-	return 0;
-out:
-	kfree(info);
-	irq_dispose_mapping(port.irq);
-	return ret;
-}
-
-/*
- * Release a line
- */
-static int of_platform_serial_remove(struct platform_device *ofdev)
-{
-	struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
-	switch (info->type) {
-#ifdef CONFIG_SERIAL_8250
-	case PORT_8250 ... PORT_MAX_8250:
-		serial8250_unregister_port(info->line);
-		break;
-#endif
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	case PORT_NWPSERIAL:
-		nwpserial_unregister_port(info->line);
-		break;
-#endif
-	default:
-		/* need to add code for these */
-		break;
-	}
-	kfree(info);
-	return 0;
-}
-
-/*
- * A few common types, add more as needed.
- */
-static struct of_device_id __devinitdata of_platform_serial_table[] = {
-	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
-	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
-	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
-	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
-	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
-	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
-#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
-					.data = (void *)PORT_NWPSERIAL, },
-#endif
-	{ .type = "serial",			      .data = (void *)PORT_UNKNOWN, },
-	{ /* end of list */ },
-};
-
-static struct of_platform_driver of_platform_serial_driver = {
-	.driver = {
-		.name = "of_serial",
-		.owner = THIS_MODULE,
-		.of_match_table = of_platform_serial_table,
-	},
-	.probe = of_platform_serial_probe,
-	.remove = of_platform_serial_remove,
-};
-
-static int __init of_platform_serial_init(void)
-{
-	return of_register_platform_driver(&of_platform_serial_driver);
-}
-module_init(of_platform_serial_init);
-
-static void __exit of_platform_serial_exit(void)
-{
-	return of_unregister_platform_driver(&of_platform_serial_driver);
-};
-module_exit(of_platform_serial_exit);
-
-MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");