summaryrefslogtreecommitdiffstats
path: root/drivers/serial/mpc52xx_uart.c
diff options
context:
space:
mode:
authorSylvain Munaut <tnt@246tNt.com>2006-01-06 00:11:32 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-06 08:33:30 -0800
commitd62de3aa8ac762c09845aa38634a845da55f31dc (patch)
tree22cb364644ecdacb2fe678b93ae0f446932cc971 /drivers/serial/mpc52xx_uart.c
parent2d8179c0b77b54e27321944e16f65defeda81e27 (diff)
downloadop-kernel-dev-d62de3aa8ac762c09845aa38634a845da55f31dc.zip
op-kernel-dev-d62de3aa8ac762c09845aa38634a845da55f31dc.tar.gz
[PATCH] ppc32/serial: Change mpc52xx_uart.c to use the Low Density Serial port major
Before this patch we were just using the "classic" /dev/ttySx devices. However when another on the system is loaded that uses those (like drivers for serial PCMCIA), that creates a conflict for the minors. Therefore, we now use /dev/ttyPSC[0:5] (note the 0-based numbering !) with some minors we've been assigned in the "Low Density Serial port major" Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/serial/mpc52xx_uart.c')
-rw-r--r--drivers/serial/mpc52xx_uart.c26
1 files changed, 15 insertions, 11 deletions
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 4dcf031..1288d62 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -37,11 +37,11 @@
* by the bootloader or in the platform init code.
*
* The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so
- * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for
- * the console code : without this 1:1 mapping, at early boot time, when we are
- * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be
- * mapped to.
+ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
+ * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
+ * fpr the console code : without this 1:1 mapping, at early boot time, when we
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it
+ * will be mapped to.
*/
#include <linux/config.h>
@@ -65,6 +65,10 @@
#include <linux/serial_core.h>
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_PSC_MAJOR 204
+#define SERIAL_PSC_MINOR 148
+
#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
@@ -671,12 +675,12 @@ mpc52xx_console_setup(struct console *co, char *options)
static struct uart_driver mpc52xx_uart_driver;
static struct console mpc52xx_console = {
- .name = "ttyS",
+ .name = "ttyPSC",
.write = mpc52xx_console_write,
.device = uart_console_device,
.setup = mpc52xx_console_setup,
.flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */
.data = &mpc52xx_uart_driver,
};
@@ -703,10 +707,10 @@ console_initcall(mpc52xx_console_init);
static struct uart_driver mpc52xx_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "mpc52xx_psc_uart",
- .dev_name = "ttyS",
- .devfs_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
+ .dev_name = "ttyPSC",
+ .devfs_name = "ttyPSC",
+ .major = SERIAL_PSC_MAJOR,
+ .minor = SERIAL_PSC_MINOR,
.nr = MPC52xx_PSC_MAXNUM,
.cons = MPC52xx_PSC_CONSOLE,
};
OpenPOWER on IntegriCloud