Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 137 insertions, 0 deletions

diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
new file mode 100644
index 0000000..1800c0e7
--- /dev/null
+++ b/drivers/serial/crisv10.h
@@ -0,0 +1,137 @@
+/*
+ * serial.h: Arch-dep definitions for the Etrax100 serial driver.
+ *
+ * Copyright (C) 1998, 1999, 2000 Axis Communications AB
+ */
+
+#ifndef _ETRAX_SERIAL_H
+#define _ETRAX_SERIAL_H
+
+#include <linux/config.h>
+#include <linux/circ_buf.h>
+#include <asm/termios.h>
+
+/* Software state per channel */
+
+#ifdef __KERNEL__
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#define SERIAL_RECV_DESCRIPTORS 8
+
+struct etrax_recv_buffer {
+	struct etrax_recv_buffer *next;
+	unsigned short length;
+	unsigned char error;
+	unsigned char pad;
+
+	unsigned char buffer[0];
+};
+
+struct e100_serial {
+	int			baud;
+	volatile u8		*port; /* R_SERIALx_CTRL */
+	u32			irq;  /* bitnr in R_IRQ_MASK2 for dmaX_descr */
+
+	/* Output registers */
+	volatile u8		*oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+	volatile u32		*ofirstadr;   /* adr to R_DMA_CHx_FIRST */
+	volatile u8		*ocmdadr;     /* adr to R_DMA_CHx_CMD */
+	const volatile u8	*ostatusadr;  /* adr to R_DMA_CHx_STATUS */
+
+	/* Input registers */
+	volatile u8		*iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+	volatile u32		*ifirstadr;   /* adr to R_DMA_CHx_FIRST */
+	volatile u8		*icmdadr;     /* adr to R_DMA_CHx_CMD */
+	volatile u32		*idescradr;   /* adr to R_DMA_CHx_DESCR */
+
+	int			flags;	/* defined in tty.h */
+
+	u8			rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
+	u8			tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
+	u8			iseteop; /* bit number for R_SET_EOP for the input dma */
+	int			enabled; /* Set to 1 if the port is enabled in HW config */
+
+	u8		dma_out_enabled:1; /* Set to 1 if DMA should be used */
+	u8		dma_in_enabled:1;  /* Set to 1 if DMA should be used */
+
+	/* end of fields defined in rs_table[] in .c-file */
+	u8		uses_dma_in;  /* Set to 1 if DMA is used */
+	u8		uses_dma_out; /* Set to 1 if DMA is used */
+	u8		forced_eop;   /* a fifo eop has been forced */
+	int			baud_base;     /* For special baudrates */
+	int			custom_divisor; /* For special baudrates */
+	struct etrax_dma_descr	tr_descr;
+	struct etrax_dma_descr	rec_descr[SERIAL_RECV_DESCRIPTORS];
+	int			cur_rec_descr;
+
+	volatile int		tr_running; /* 1 if output is running */
+
+	struct tty_struct	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			x_char;	/* xon/xoff character */
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned short		closing_wait2;
+	unsigned long		event;
+	unsigned long		last_active;
+	int			line;
+	int			type;  /* PORT_ETRAX */
+	int			count;	    /* # of fd on device */
+	int			blocked_open; /* # of blocked opens */
+	struct circ_buf		xmit;
+	struct etrax_recv_buffer *first_recv_buffer;
+	struct etrax_recv_buffer *last_recv_buffer;
+	unsigned int		recv_cnt;
+	unsigned int		max_recv_cnt;
+
+	struct work_struct	work;
+	struct async_icount	icount;   /* error-statistics etc.*/
+	struct termios		normal_termios;
+	struct termios		callout_termios;
+#ifdef DECLARE_WAITQUEUE
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+#else
+	struct wait_queue	*open_wait;
+	struct wait_queue	*close_wait;
+#endif
+
+	unsigned long		char_time_usec;       /* The time for 1 char, in usecs */
+	unsigned long		flush_time_usec;      /* How often we should flush */
+	unsigned long		last_tx_active_usec;  /* Last tx usec in the jiffies */
+	unsigned long		last_tx_active;       /* Last tx time in jiffies */
+	unsigned long		last_rx_active_usec;  /* Last rx usec in the jiffies */
+	unsigned long		last_rx_active;       /* Last rx time in jiffies */
+
+	int			break_detected_cnt;
+	int			errorcode;
+
+#ifdef CONFIG_ETRAX_RS485
+	struct rs485_control	rs485;  /* RS-485 support */
+#endif
+};
+
+/* this PORT is not in the standard serial.h. it's not actually used for
+ * anything since we only have one type of async serial-port anyway in this
+ * system.
+ */
+
+#define PORT_ETRAX 1
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP	0
+
+#endif /* __KERNEL__ */
+
+#endif /* !_ETRAX_SERIAL_H */