serial: kill off uart_info

We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4fff4e5..50abb7e 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -144,7 +144,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 #endif
 
 	while (!(UART_GET_LSR(uart) & TEMT))
@@ -171,7 +171,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 static void bfin_serial_start_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
@@ -243,10 +243,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 			return;
 		}
 
-	if (!uart->port.info || !uart->port.info->port.tty)
+	if (!uart->port.state || !uart->port.state->port.tty)
 		return;
 #endif
-	tty = uart->port.info->port.tty;
+	tty = uart->port.state->port.tty;
 
 	if (ANOMALY_05000363) {
 		/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -331,7 +331,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 #ifdef CONFIG_BF54x
@@ -398,7 +398,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	uart->tx_done = 0;
 
@@ -436,7 +436,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 {
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 	int i, flg, status;
 
 	status = UART_GET_LSR(uart);
@@ -529,7 +529,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
@@ -965,10 +965,10 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
 	int line = port->line;
 	unsigned short val;
 
-	if (line >= port->info->port.tty->driver->num)
+	if (line >= port->state->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->termios->c_line) {
+	switch (port->state->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);