diff options
| author | Chip Coldwell <coldwell@redhat.com> | 2008-02-08 04:21:06 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2008-02-08 09:22:37 -0800 |
| commit | a66706158d6bc4d9eb29c37852001f78f4c8989c (patch) | |
| tree | d2d593dc2902c1db1ea6d0ef417dc3426e0b3bae /drivers/serial/Kconfig | |
| parent | 1ecc26bd2789ddb253f61e182a61c776663fe44c (diff) | |
| download | op-kernel-dev-a66706158d6bc4d9eb29c37852001f78f4c8989c.zip op-kernel-dev-a66706158d6bc4d9eb29c37852001f78f4c8989c.tar.gz | |
atmel_serial: add DMA support
This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial
USARTS, with some tweaks to make it apply neatly on top of the other patches
in this series.
The RX and TX code has been moved to a tasklet and reworked a bit. Instead of
depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as
we can from the DMA buffers. I think this closes a race where the ENDRX bit
is set after we read CSR but before we read RPR, although I haven't confirmed
this.
Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one.
Since the current code only uses a single TX buffer, there's no point in
handling those interrupts separately.
This also fixes a DMA sync bug in the original patch.
[linux@bohmer.net: rebased onto irq-splitup patch]
[hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups]
[hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups]
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial/Kconfig')
| -rw-r--r-- | drivers/serial/Kconfig | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 84a054d..b82595c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -380,6 +380,21 @@ config SERIAL_ATMEL_CONSOLE console is the device which receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_ATMEL_PDC + bool "Support DMA transfers on AT91 / AT32 serial port" + depends on SERIAL_ATMEL + default y + help + Say Y here if you wish to use the PDC to do DMA transfers to + and from the Atmel AT91 / AT32 serial port. In order to + actually use DMA transfers, make sure that the use_dma_tx + and use_dma_rx members in the atmel_uart_data struct is set + appropriately for each port. + + Note that break and error handling currently doesn't work + properly when DMA is enabled. Make sure that ports where + this matters don't use DMA. + config SERIAL_ATMEL_TTYAT bool "Install as device ttyATn instead of ttySn" depends on SERIAL_ATMEL=y |
