Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

1 files changed, 34 insertions, 35 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5351848..f55c494 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1026,6 +1026,10 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_DMA
+	bool "DMA support"
+	depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
 	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
@@ -1103,12 +1107,12 @@ config SERIAL_68360
 	default y
 
 config SERIAL_PMACZILOG
-	tristate "PowerMac z85c30 ESCC support"
-	depends on PPC_OF && PPC_PMAC
+	tristate "Mac or PowerMac z85c30 ESCC support"
+	depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
 	select SERIAL_CORE
 	help
 	  This driver supports the Zilog z85C30 serial ports found on
-	  PowerMac machines.
+	  (Power)Mac machines.
 	  Say Y or M if you want to be able to these serial ports.
 
 config SERIAL_PMACZILOG_TTYS
@@ -1133,16 +1137,16 @@ config SERIAL_PMACZILOG_TTYS
 	  unable to use the 8250 module for PCMCIA or other 16C550-style
 	  UARTs.
 
-	  Say N unless you need the z85c30 ports on your powermac
+	  Say N unless you need the z85c30 ports on your (Power)Mac
 	  to appear as /dev/ttySn.
 
 config SERIAL_PMACZILOG_CONSOLE
-	bool "Console on PowerMac z85c30 serial port"
+	bool "Console on Mac or PowerMac z85c30 serial port"
 	depends on SERIAL_PMACZILOG=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you would like to be able to use the z85c30 serial port
-	  on your PowerMac as the console, you can do so by answering
+	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
 config SERIAL_LH7A40X
@@ -1435,42 +1439,37 @@ config SERIAL_BFIN_SPORT
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin_sport_uart.
 
-choice
-	prompt "Baud rate for Blackfin SPORT UART"
-	depends on SERIAL_BFIN_SPORT
-	default SERIAL_SPORT_BAUD_RATE_57600
-	help
-	  Choose a baud rate for the SPORT UART, other uart settings are
-	  8 bit, 1 stop bit, no parity, no flow control.
-
-config SERIAL_SPORT_BAUD_RATE_115200
-	bool "115200"
-
-config SERIAL_SPORT_BAUD_RATE_57600
-	bool "57600"
+config SERIAL_BFIN_SPORT_CONSOLE
+	bool "Console on Blackfin sport emulated uart"
+	depends on SERIAL_BFIN_SPORT=y
+	select SERIAL_CORE_CONSOLE
 
-config SERIAL_SPORT_BAUD_RATE_38400
-	bool "38400"
+config SERIAL_BFIN_SPORT0_UART
+	bool "Enable UART over SPORT0"
+	depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)
+	help
+	  Enable UART over SPORT0
 
-config SERIAL_SPORT_BAUD_RATE_19200
-	bool "19200"
+config SERIAL_BFIN_SPORT1_UART
+	bool "Enable UART over SPORT1"
+	depends on SERIAL_BFIN_SPORT
+	help
+	  Enable UART over SPORT1
 
-config SERIAL_SPORT_BAUD_RATE_9600
-	bool "9600"
-endchoice
+config SERIAL_BFIN_SPORT2_UART
+	bool "Enable UART over SPORT2"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT2
 
-config SPORT_BAUD_RATE
-	int
-	depends on SERIAL_BFIN_SPORT
-	default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
-	default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
-	default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
-	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
-	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_BFIN_SPORT3_UART
+	bool "Enable UART over SPORT3"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT3
 
 config SERIAL_TIMBERDALE
 	tristate "Support for timberdale UART"
-	depends on MFD_TIMBERDALE
 	select SERIAL_CORE
 	---help---
 	Add support for UART controller on timberdale.