summaryrefslogtreecommitdiffstats
path: root/drivers/serial/8250_pci.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/8250_pci.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/8250_pci.c')
-rw-r--r--drivers/serial/8250_pci.c2303
1 files changed, 2303 insertions, 0 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
new file mode 100644
index 0000000..f8d90d0
--- /dev/null
+++ b/drivers/serial/8250_pci.c
@@ -0,0 +1,2303 @@
+/*
+ * linux/drivers/char/8250_pci.c
+ *
+ * Probe module for 8250/16550-type PCI serial ports.
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/8250_pci.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "8250.h"
+
+#undef SERIAL_DEBUG_PCI
+
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK 0x0007
+#define FL_BASE0 0x0000
+#define FL_BASE1 0x0001
+#define FL_BASE2 0x0002
+#define FL_BASE3 0x0003
+#define FL_BASE4 0x0004
+#define FL_GET_BASE(x) (x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+ else use offset into some specified BAR */
+#define FL_BASE_BARS 0x0008
+
+/* do not assign an irq */
+#define FL_NOIRQ 0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP 0x0100
+
+struct pci_board {
+ unsigned int flags;
+ unsigned int num_ports;
+ unsigned int base_baud;
+ unsigned int uart_offset;
+ unsigned int reg_shift;
+ unsigned int first_offset;
+};
+
+/*
+ * init function returns:
+ * > 0 - number of ports
+ * = 0 - use board->num_ports
+ * < 0 - error
+ */
+struct pci_serial_quirk {
+ u32 vendor;
+ u32 device;
+ u32 subvendor;
+ u32 subdevice;
+ int (*init)(struct pci_dev *dev);
+ int (*setup)(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx);
+ void (*exit)(struct pci_dev *dev);
+};
+
+#define PCI_NUM_BAR_RESOURCES 6
+
+struct serial_private {
+ unsigned int nr;
+ void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
+ struct pci_serial_quirk *quirk;
+ int line[0];
+};
+
+static void moan_device(const char *str, struct pci_dev *dev)
+{
+ printk(KERN_WARNING "%s: %s\n"
+ KERN_WARNING "Please send the output of lspci -vv, this\n"
+ KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ KERN_WARNING "manufacturer and name of serial board or\n"
+ KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+ pci_name(dev), str, dev->vendor, dev->device,
+ dev->subsystem_vendor, dev->subsystem_device);
+}
+
+static int
+setup_port(struct pci_dev *dev, struct uart_port *port,
+ int bar, int offset, int regshift)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+ unsigned long base, len;
+
+ if (bar >= PCI_NUM_BAR_RESOURCES)
+ return -EINVAL;
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+
+ if (!priv->remapped_bar[bar])
+ priv->remapped_bar[bar] = ioremap(base, len);
+ if (!priv->remapped_bar[bar])
+ return -ENOMEM;
+
+ port->iotype = UPIO_MEM;
+ port->mapbase = base + offset;
+ port->membase = priv->remapped_bar[bar] + offset;
+ port->regshift = regshift;
+ } else {
+ base = pci_resource_start(dev, bar) + offset;
+ port->iotype = UPIO_PORT;
+ port->iobase = base;
+ }
+ return 0;
+}
+
+/*
+ * AFAVLAB uses a different mixture of BARs and offsets
+ * Not that ugly ;) -- HW
+ */
+static int
+afavlab_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = FL_GET_BASE(board->flags);
+ if (idx < 4)
+ bar += idx;
+ else {
+ bar = 4;
+ offset += (idx - 4) * board->uart_offset;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * HP's Remote Management Console. The Diva chip came in several
+ * different versions. N-class, L2000 and A500 have two Diva chips, each
+ * with 3 UARTs (the third UART on the second chip is unused). Superdome
+ * and Keystone have one Diva chip with 3 UARTs. Some later machines have
+ * one Diva chip, but it has been expanded to 5 UARTs.
+ */
+static int __devinit pci_hp_diva_init(struct pci_dev *dev)
+{
+ int rc = 0;
+
+ switch (dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
+ case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
+ case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ rc = 3;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
+ rc = 2;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ rc = 4;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+/*
+ * HP's Diva chip puts the 4th/5th serial port further out, and
+ * some serial ports are supposed to be hidden on certain models.
+ */
+static int
+pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int offset = board->first_offset;
+ unsigned int bar = FL_GET_BASE(board->flags);
+
+ switch (dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ if (idx == 3)
+ idx++;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ if (idx > 0)
+ idx++;
+ if (idx > 2)
+ idx++;
+ break;
+ }
+ if (idx > 2)
+ offset = 0x18;
+
+ offset += idx * board->uart_offset;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Added for EKF Intel i960 serial boards
+ */
+static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
+{
+ unsigned long oldval;
+
+ if (!(dev->subsystem_device & 0x1000))
+ return -ENODEV;
+
+ /* is firmware started? */
+ pci_read_config_dword(dev, 0x44, (void*) &oldval);
+ if (oldval == 0x00001000L) { /* RESET value */
+ printk(KERN_DEBUG "Local i960 firmware missing");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/*
+ * Some PCI serial cards using the PLX 9050 PCI interface chip require
+ * that the card interrupt be explicitly enabled or disabled. This
+ * seems to be mainly needed on card using the PLX which also use I/O
+ * mapped memory.
+ */
+static int __devinit pci_plx9050_init(struct pci_dev *dev)
+{
+ u8 irq_config;
+ void __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar 0", dev);
+ return 0;
+ }
+
+ irq_config = 0x41;
+ if (dev->vendor == PCI_VENDOR_ID_PANACOM)
+ irq_config = 0x43;
+ if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
+ /*
+ * As the megawolf cards have the int pins active
+ * high, and have 2 UART chips, both ints must be
+ * enabled on the 9050. Also, the UARTS are set in
+ * 16450 mode by default, so we have to enable the
+ * 16C950 'enhanced' mode so that we can use the
+ * deep FIFOs
+ */
+ irq_config = 0x5b;
+ }
+
+ /*
+ * enable/disable interrupts
+ */
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+ writel(irq_config, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+
+ return 0;
+}
+
+static void __devexit pci_plx9050_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
+ return;
+
+ /*
+ * disable interrupts
+ */
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p != NULL) {
+ writel(0, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+ }
+}
+
+/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
+static int
+sbs_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = 0;
+
+ if (idx < 4) {
+ /* first four channels map to 0, 0x100, 0x200, 0x300 */
+ offset += idx * board->uart_offset;
+ } else if (idx < 8) {
+ /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
+ offset += idx * board->uart_offset + 0xC00;
+ } else /* we have only 8 ports on PMC-OCTALPRO */
+ return 1;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+* This does initialization for PMC OCTALPRO cards:
+* maps the device memory, resets the UARTs (needed, bc
+* if the module is removed and inserted again, the card
+* is in the sleep mode) and enables global interrupt.
+*/
+
+/* global control register offset for SBS PMC-OctalPro */
+#define OCT_REG_CR_OFF 0x500
+
+static int __devinit sbs_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+
+ if (p == NULL)
+ return -ENOMEM;
+ /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
+ writeb(0x10,p + OCT_REG_CR_OFF);
+ udelay(50);
+ writeb(0x0,p + OCT_REG_CR_OFF);
+
+ /* Set bit-2 (INTENABLE) of Control Register */
+ writeb(0x4, p + OCT_REG_CR_OFF);
+ iounmap(p);
+
+ return 0;
+}
+
+/*
+ * Disables the global interrupt of PMC-OctalPro
+ */
+
+static void __devexit sbs_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+ if (p != NULL) {
+ writeb(0, p + OCT_REG_CR_OFF);
+ }
+ iounmap(p);
+}
+
+/*
+ * SIIG serial cards have an PCI interface chip which also controls
+ * the UART clocking frequency. Each UART can be clocked independently
+ * (except cards equiped with 4 UARTs) and initial clocking settings
+ * are stored in the EEPROM chip. It can cause problems because this
+ * version of serial driver doesn't support differently clocked UART's
+ * on single PCI card. To prevent this, initialization functions set
+ * high frequency clocking for all UART's on given card. It is safe (I
+ * hope) because it doesn't touch EEPROM settings to prevent conflicts
+ * with other OSes (like M$ DOS).
+ *
+ * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
+ *
+ * There is two family of SIIG serial cards with different PCI
+ * interface chip and different configuration methods:
+ * - 10x cards have control registers in IO and/or memory space;
+ * - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
+ */
+
+#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
+
+static int pci_siig10x_init(struct pci_dev *dev)
+{
+ u16 data;
+ void __iomem *p;
+
+ switch (dev->device & 0xfff8) {
+ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
+ data = 0xffdf;
+ break;
+ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
+ data = 0xf7ff;
+ break;
+ default: /* 1S1P, 4S */
+ data = 0xfffb;
+ break;
+ }
+
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+
+ writew(readw(p + 0x28) & data, p + 0x28);
+ readw(p + 0x28);
+ iounmap(p);
+ return 0;
+}
+
+#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
+
+static int pci_siig20x_init(struct pci_dev *dev)
+{
+ u8 data;
+
+ /* Change clock frequency for the first UART. */
+ pci_read_config_byte(dev, 0x6f, &data);
+ pci_write_config_byte(dev, 0x6f, data & 0xef);
+
+ /* If this card has 2 UART, we have to do the same with second UART. */
+ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
+ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
+ pci_read_config_byte(dev, 0x73, &data);
+ pci_write_config_byte(dev, 0x73, data & 0xef);
+ }
+ return 0;
+}
+
+int pci_siig10x_fn(struct pci_dev *dev, int enable)
+{
+ int ret = 0;
+ if (enable)
+ ret = pci_siig10x_init(dev);
+ return ret;
+}
+
+int pci_siig20x_fn(struct pci_dev *dev, int enable)
+{
+ int ret = 0;
+ if (enable)
+ ret = pci_siig20x_init(dev);
+ return ret;
+}
+
+EXPORT_SYMBOL(pci_siig10x_fn);
+EXPORT_SYMBOL(pci_siig20x_fn);
+
+/*
+ * Timedia has an explosion of boards, and to avoid the PCI table from
+ * growing *huge*, we use this function to collapse some 70 entries
+ * in the PCI table into one, for sanity's and compactness's sake.
+ */
+static unsigned short timedia_single_port[] = {
+ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
+};
+
+static unsigned short timedia_dual_port[] = {
+ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
+ 0xD079, 0
+};
+
+static unsigned short timedia_quad_port[] = {
+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
+ 0xB157, 0
+};
+
+static unsigned short timedia_eight_port[] = {
+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
+};
+
+static struct timedia_struct {
+ int num;
+ unsigned short *ids;
+} timedia_data[] = {
+ { 1, timedia_single_port },
+ { 2, timedia_dual_port },
+ { 4, timedia_quad_port },
+ { 8, timedia_eight_port },
+ { 0, NULL }
+};
+
+static int __devinit pci_timedia_init(struct pci_dev *dev)
+{
+ unsigned short *ids;
+ int i, j;
+
+ for (i = 0; timedia_data[i].num; i++) {
+ ids = timedia_data[i].ids;
+ for (j = 0; ids[j]; j++)
+ if (dev->subsystem_device == ids[j])
+ return timedia_data[i].num;
+ }
+ return 0;
+}
+
+/*
+ * Timedia/SUNIX uses a mixture of BARs and offsets
+ * Ugh, this is ugly as all hell --- TYT
+ */
+static int
+pci_timedia_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 0;
+ break;
+ case 1:
+ offset = board->uart_offset;
+ bar = 0;
+ break;
+ case 2:
+ bar = 1;
+ break;
+ case 3:
+ offset = board->uart_offset;
+ bar = 1;
+ case 4: /* BAR 2 */
+ case 5: /* BAR 3 */
+ case 6: /* BAR 4 */
+ case 7: /* BAR 5 */
+ bar = idx - 2;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Some Titan cards are also a little weird
+ */
+static int
+titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 1;
+ break;
+ case 1:
+ bar = 2;
+ break;
+ default:
+ bar = 4;
+ offset = (idx - 2) * board->uart_offset;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+static int __devinit pci_xircom_init(struct pci_dev *dev)
+{
+ msleep(100);
+ return 0;
+}
+
+static int __devinit pci_netmos_init(struct pci_dev *dev)
+{
+ /* subdevice 0x00PS means <P> parallel, <S> serial */
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ if (num_serial == 0)
+ return -ENODEV;
+ return num_serial;
+}
+
+static int
+pci_default_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ maxnr = (pci_resource_len(dev, bar) - board->first_offset) /
+ (8 << board->reg_shift);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/* This should be in linux/pci_ids.h */
+#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_DEVICE_ID_OCTPRO 0x0001
+#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
+#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
+#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
+#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+
+/*
+ * Master list of serial port init/setup/exit quirks.
+ * This does not describe the general nature of the port.
+ * (ie, baud base, number and location of ports, etc)
+ *
+ * This list is ordered alphabetically by vendor then device.
+ * Specific entries must come before more generic entries.
+ */
+static struct pci_serial_quirk pci_serial_quirks[] = {
+ /*
+ * AFAVLAB cards.
+ * It is not clear whether this applies to all products.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_AFAVLAB,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = afavlab_setup,
+ },
+ /*
+ * HP Diva
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP,
+ .device = PCI_DEVICE_ID_HP_DIVA,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_hp_diva_init,
+ .setup = pci_hp_diva_setup,
+ },
+ /*
+ * Intel
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_80960_RP,
+ .subvendor = 0xe4bf,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_inteli960ni_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Panacom
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * PLX
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
+ .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_ROMULUS,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+
+ /*
+ * SIIG cards.
+ * It is not clear whether these could be collapsed.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ { .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Titan cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_400L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_800L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ /*
+ * Timedia cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_DEVICE_ID_TIMEDIA_1889,
+ .subvendor = PCI_VENDOR_ID_TIMEDIA,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_timedia_init,
+ .setup = pci_timedia_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_timedia_setup,
+ },
+ /*
+ * Xircom cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_XIRCOM,
+ .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_xircom_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Netmos cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_NETMOS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_netmos_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Default "match everything" terminator entry
+ */
+ {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ }
+};
+
+static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
+{
+ return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
+}
+
+static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
+{
+ struct pci_serial_quirk *quirk;
+
+ for (quirk = pci_serial_quirks; ; quirk++)
+ if (quirk_id_matches(quirk->vendor, dev->vendor) &&
+ quirk_id_matches(quirk->device, dev->device) &&
+ quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
+ quirk_id_matches(quirk->subdevice, dev->subsystem_device))
+ break;
+ return quirk;
+}
+
+static _INLINE_ int
+get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx)
+{
+ if (board->flags & FL_NOIRQ)
+ return 0;
+ else
+ return dev->irq;
+}
+
+/*
+ * This is the configuration table for all of the PCI serial boards
+ * which we support. It is directly indexed by the pci_board_num_t enum
+ * value, which is encoded in the pci_device_id PCI probe table's
+ * driver_data member.
+ *
+ * The makeup of these names are:
+ * pbn_bn{_bt}_n_baud
+ *
+ * bn = PCI BAR number
+ * bt = Index using PCI BARs
+ * n = number of serial ports
+ * baud = baud rate
+ *
+ * Please note: in theory if n = 1, _bt infix should make no difference.
+ * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
+ */
+enum pci_board_num_t {
+ pbn_default = 0,
+
+ pbn_b0_1_115200,
+ pbn_b0_2_115200,
+ pbn_b0_4_115200,
+ pbn_b0_5_115200,
+
+ pbn_b0_1_921600,
+ pbn_b0_2_921600,
+ pbn_b0_4_921600,
+
+ pbn_b0_bt_1_115200,
+ pbn_b0_bt_2_115200,
+ pbn_b0_bt_8_115200,
+
+ pbn_b0_bt_1_460800,
+ pbn_b0_bt_2_460800,
+ pbn_b0_bt_4_460800,
+
+ pbn_b0_bt_1_921600,
+ pbn_b0_bt_2_921600,
+ pbn_b0_bt_4_921600,
+ pbn_b0_bt_8_921600,
+
+ pbn_b1_1_115200,
+ pbn_b1_2_115200,
+ pbn_b1_4_115200,
+ pbn_b1_8_115200,
+
+ pbn_b1_1_921600,
+ pbn_b1_2_921600,
+ pbn_b1_4_921600,
+ pbn_b1_8_921600,
+
+ pbn_b1_bt_2_921600,
+
+ pbn_b1_1_1382400,
+ pbn_b1_2_1382400,
+ pbn_b1_4_1382400,
+ pbn_b1_8_1382400,
+
+ pbn_b2_1_115200,
+ pbn_b2_8_115200,
+
+ pbn_b2_1_460800,
+ pbn_b2_4_460800,
+ pbn_b2_8_460800,
+ pbn_b2_16_460800,
+
+ pbn_b2_1_921600,
+ pbn_b2_4_921600,
+ pbn_b2_8_921600,
+
+ pbn_b2_bt_1_115200,
+ pbn_b2_bt_2_115200,
+ pbn_b2_bt_4_115200,
+
+ pbn_b2_bt_2_921600,
+ pbn_b2_bt_4_921600,
+
+ pbn_b3_4_115200,
+ pbn_b3_8_115200,
+
+ /*
+ * Board-specific versions.
+ */
+ pbn_panacom,
+ pbn_panacom2,
+ pbn_panacom4,
+ pbn_plx_romulus,
+ pbn_oxsemi,
+ pbn_intel_i960,
+ pbn_sgi_ioc3,
+ pbn_nec_nile4,
+ pbn_computone_4,
+ pbn_computone_6,
+ pbn_computone_8,
+ pbn_sbsxrsio,
+ pbn_exar_XR17C152,
+ pbn_exar_XR17C154,
+ pbn_exar_XR17C158,
+};
+
+/*
+ * uart_offset - the space between channels
+ * reg_shift - describes how the UART registers are mapped
+ * to PCI memory by the card.
+ * For example IER register on SBS, Inc. PMC-OctPro is located at
+ * offset 0x10 from the UART base, while UART_IER is defined as 1
+ * in include/linux/serial_reg.h,
+ * see first lines of serial_in() and serial_out() in 8250.c
+*/
+
+static struct pci_board pci_boards[] __devinitdata = {
+ [pbn_default] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_1_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_5_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 5,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_1_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_bt_2_921600] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_16_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 16,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_1_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_2_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_2_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b3_4_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b3_8_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ /*
+ * Entries following this are board-specific.
+ */
+
+ /*
+ * Panacom - IOMEM
+ */
+ [pbn_panacom] = {
+ .flags = FL_BASE2,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom2] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom4] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+
+ /* I think this entry is broken - the first_offset looks wrong --rmk */
+ [pbn_plx_romulus] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x03,
+ },
+
+ /*
+ * This board uses the size of PCI Base region 0 to
+ * signal now many ports are available
+ */
+ [pbn_oxsemi] = {
+ .flags = FL_BASE0|FL_REGION_SZ_CAP,
+ .num_ports = 32,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port.
+ * Max 256 ports.
+ */
+ [pbn_intel_i960] = {
+ .flags = FL_BASE0,
+ .num_ports = 32,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x10000,
+ },
+ [pbn_sgi_ioc3] = {
+ .flags = FL_BASE0|FL_NOIRQ,
+ .num_ports = 1,
+ .base_baud = 458333,
+ .uart_offset = 8,
+ .reg_shift = 0,
+ .first_offset = 0x20178,
+ },
+
+ /*
+ * NEC Vrc-5074 (Nile 4) builtin UART.
+ */
+ [pbn_nec_nile4] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 520833,
+ .uart_offset = 8 << 3,
+ .reg_shift = 3,
+ .first_offset = 0x300,
+ },
+
+ /*
+ * Computone - uses IOMEM.
+ */
+ [pbn_computone_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_6] = {
+ .flags = FL_BASE0,
+ .num_ports = 6,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_sbsxrsio] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 256,
+ .reg_shift = 4,
+ },
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ * Only basic 16550A support.
+ * XR17C15[24] are not tested, but they should work.
+ */
+ [pbn_exar_XR17C152] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C154] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C158] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+};
+
+/*
+ * Given a complete unknown PCI device, try to use some heuristics to
+ * guess what the configuration might be, based on the pitiful PCI
+ * serial specs. Returns 0 on success, 1 on failure.
+ */
+static int __devinit
+serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board)
+{
+ int num_iomem, num_port, first_port = -1, i;
+
+ /*
+ * If it is not a communications device or the programming
+ * interface is greater than 6, give up.
+ *
+ * (Should we try to make guesses for multiport serial devices
+ * later?)
+ */
+ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
+ (dev->class & 0xff) > 6)
+ return -ENODEV;
+
+ num_iomem = num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
+ num_iomem++;
+ }
+
+ /*
+ * If there is 1 or 0 iomem regions, and exactly one port,
+ * use it. We guess the number of ports based on the IO
+ * region size.
+ */
+ if (num_iomem <= 1 && num_port == 1) {
+ board->flags = first_port;
+ board->num_ports = pci_resource_len(dev, first_port) / 8;
+ return 0;
+ }
+
+ /*
+ * Now guess if we've got a board which indexes by BARs.
+ * Each IO BAR should be 8 bytes, and they should follow
+ * consecutively.
+ */
+ first_port = -1;
+ num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
+ pci_resource_len(dev, i) == 8 &&
+ (first_port == -1 || (first_port + num_port) == i)) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ }
+
+ if (num_port > 1) {
+ board->flags = first_port | FL_BASE_BARS;
+ board->num_ports = num_port;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static inline int
+serial_pci_matches(struct pci_board *board, struct pci_board *guessed)
+{
+ return
+ board->num_ports == guessed->num_ports &&
+ board->base_baud == guessed->base_baud &&
+ board->uart_offset == guessed->uart_offset &&
+ board->reg_shift == guessed->reg_shift &&
+ board->first_offset == guessed->first_offset;
+}
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct serial_private *priv;
+ struct pci_board *board, tmp;
+ struct pci_serial_quirk *quirk;
+ int rc, nr_ports, i;
+
+ if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+ printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ ent->driver_data);
+ return -EINVAL;
+ }
+
+ board = &pci_boards[ent->driver_data];
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ if (ent->driver_data == pbn_default) {
+ /*
+ * Use a copy of the pci_board entry for this;
+ * avoid changing entries in the table.
+ */
+ memcpy(&tmp, board, sizeof(struct pci_board));
+ board = &tmp;
+
+ /*
+ * We matched one of our class entries. Try to
+ * determine the parameters of this board.
+ */
+ rc = serial_pci_guess_board(dev, board);
+ if (rc)
+ goto disable;
+ } else {
+ /*
+ * We matched an explicit entry. If we are able to
+ * detect this boards settings with our heuristic,
+ * then we no longer need this entry.
+ */
+ memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board));
+ rc = serial_pci_guess_board(dev, &tmp);
+ if (rc == 0 && serial_pci_matches(board, &tmp))
+ moan_device("Redundant entry in serial pci_table.",
+ dev);
+ }
+
+ nr_ports = board->num_ports;
+
+ /*
+ * Find an init and setup quirks.
+ */
+ quirk = find_quirk(dev);
+
+ /*
+ * Run the new-style initialization function.
+ * The initialization function returns:
+ * <0 - error
+ * 0 - use board->num_ports
+ * >0 - number of ports
+ */
+ if (quirk->init) {
+ rc = quirk->init(dev);
+ if (rc < 0)
+ goto disable;
+ if (rc)
+ nr_ports = rc;
+ }
+
+ priv = kmalloc(sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports,
+ GFP_KERNEL);
+ if (!priv) {
+ rc = -ENOMEM;
+ goto deinit;
+ }
+
+ memset(priv, 0, sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports);
+
+ priv->quirk = quirk;
+ pci_set_drvdata(dev, priv);
+
+ for (i = 0; i < nr_ports; i++) {
+ struct uart_port serial_port;
+ memset(&serial_port, 0, sizeof(struct uart_port));
+
+ serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF |
+ UPF_SHARE_IRQ;
+ serial_port.uartclk = board->base_baud * 16;
+ serial_port.irq = get_pci_irq(dev, board, i);
+ serial_port.dev = &dev->dev;
+ if (quirk->setup(dev, board, &serial_port, i))
+ break;
+#ifdef SERIAL_DEBUG_PCI
+ printk("Setup PCI port: port %x, irq %d, type %d\n",
+ serial_port.iobase, serial_port.irq, serial_port.iotype);
+#endif
+
+ priv->line[i] = serial8250_register_port(&serial_port);
+ if (priv->line[i] < 0) {
+ printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+ break;
+ }
+ }
+
+ priv->nr = i;
+
+ return 0;
+
+ deinit:
+ if (quirk->exit)
+ quirk->exit(dev);
+ disable:
+ pci_disable_device(dev);
+ return rc;
+}
+
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ if (priv) {
+ struct pci_serial_quirk *quirk;
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_unregister_port(priv->line[i]);
+
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (priv->remapped_bar[i])
+ iounmap(priv->remapped_bar[i]);
+ priv->remapped_bar[i] = NULL;
+ }
+
+ /*
+ * Find the exit quirks.
+ */
+ quirk = find_quirk(dev);
+ if (quirk->exit)
+ quirk->exit(dev);
+
+ pci_disable_device(dev);
+
+ kfree(priv);
+ }
+}
+
+static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv) {
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_suspend_port(priv->line[i]);
+ }
+ pci_save_state(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ return 0;
+}
+
+static int pciserial_resume_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ if (priv) {
+ int i;
+
+ /*
+ * The device may have been disabled. Re-enable it.
+ */
+ pci_enable_device(dev);
+
+ /*
+ * Ensure that the board is correctly configured.
+ */
+ if (priv->quirk->init)
+ priv->quirk->init(dev);
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_resume_port(priv->line[i]);
+ }
+ return 0;
+}
+
+static struct pci_device_id serial_pci_tbl[] = {
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
+ pbn_b1_2_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
+ pbn_b1_4_921600 },
+
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_1_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ /*
+ * VScom SPCOM800, from sl@s.pl
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_KEYSPAN,
+ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
+ pbn_panacom },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom4 },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom2 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
+ pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
+ pbn_b2_8_460800 },
+ /*
+ * Megawolf Romulus PCI Serial Card, from Mike Hudson
+ * (Exoray@isys.ca)
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
+ 0x10b5, 0x106a, 0, 0,
+ pbn_plx_romulus },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_115200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+
+ /*
+ * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
+ * from skokodyn@yahoo.com
+ */
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
+ pbn_sbsxrsio },
+
+ /*
+ * Digitan DS560-558, from jimd@esoft.com
+ */
+ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
+
+ /*
+ * Titan Electronic cards
+ * The 400L and 800L have a custom setup quirk.
+ */
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+
+ /*
+ * Computone devices submitted by Doug McNash dmcnash@computone.com
+ */
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
+ 0, 0, pbn_computone_4 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
+ 0, 0, pbn_computone_8 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
+ 0, 0, pbn_computone_6 },
+
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi },
+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_921600 },
+
+ /*
+ * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
+ */
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_460800 },
+
+ /*
+ * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * RAStel 2 port modem, gerg@moreton.com.au
+ */
+ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port
+ */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
+ 0xE4BF, PCI_ANY_ID, 0, 0,
+ pbn_intel_i960 },
+
+ /*
+ * Xircom Cardbus/Ethernet combos
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+ /*
+ * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+
+ /*
+ * Untested PCI modems, sent in from various folks...
+ */
+
+ /*
+ * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
+ */
+ { PCI_VENDOR_ID_ROCKWELL, 0x1004,
+ 0x1048, 0x1500, 0, 0,
+ pbn_b1_1_115200 },
+
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ 0xFF00, 0, 0, 0,
+ pbn_sgi_ioc3 },
+
+ /*
+ * HP Diva card
+ */
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
+ pbn_b1_1_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_5_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+
+ /*
+ * NEC Vrc-5074 (Nile 4) builtin UART.
+ */
+ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_nec_nile4 },
+
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_4_115200 },
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_8_115200 },
+
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ */
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C152 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C154 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C158 },
+
+ /*
+ * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
+ */
+ { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+
+ /*
+ * These entries match devices with class COMMUNICATION_SERIAL,
+ * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
+ */
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MODEM << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
+ 0xffff00, pbn_default },
+ { 0, }
+};
+
+static struct pci_driver serial_pci_driver = {
+ .name = "serial",
+ .probe = pciserial_init_one,
+ .remove = __devexit_p(pciserial_remove_one),
+ .suspend = pciserial_suspend_one,
+ .resume = pciserial_resume_one,
+ .id_table = serial_pci_tbl,
+};
+
+static int __init serial8250_pci_init(void)
+{
+ return pci_register_driver(&serial_pci_driver);
+}
+
+static void __exit serial8250_pci_exit(void)
+{
+ pci_unregister_driver(&serial_pci_driver);
+}
+
+module_init(serial8250_pci_init);
+module_exit(serial8250_pci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
+MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
OpenPOWER on IntegriCloud