libiscsi, iser: Adjust data_length to include protection information

In case protection information exists over the wire
iscsi header data length is required to include it.
Use protection information aware scsi helpers to set
the correct transfer length.

In order to avoid breakage, remove iser transfer length
checks for each task as they are not always true and
somewhat redundant anyway.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 26dc005b..3f46234 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -338,7 +338,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 	struct iscsi_session *session = conn->session;
 	struct scsi_cmnd *sc = task->sc;
 	struct iscsi_scsi_req *hdr;
-	unsigned hdrlength, cmd_len;
+	unsigned hdrlength, cmd_len, transfer_length;
 	itt_t itt;
 	int rc;
 
@@ -391,11 +391,11 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 	if (scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
 		task->protected = true;
 
+	transfer_length = scsi_transfer_length(sc);
+	hdr->data_length = cpu_to_be32(transfer_length);
 	if (sc->sc_data_direction == DMA_TO_DEVICE) {
-		unsigned out_len = scsi_out(sc)->length;
 		struct iscsi_r2t_info *r2t = &task->unsol_r2t;
 
-		hdr->data_length = cpu_to_be32(out_len);
 		hdr->flags |= ISCSI_FLAG_CMD_WRITE;
 		/*
 		 * Write counters:
@@ -414,18 +414,19 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 		memset(r2t, 0, sizeof(*r2t));
 
 		if (session->imm_data_en) {
-			if (out_len >= session->first_burst)
+			if (transfer_length >= session->first_burst)
 				task->imm_count = min(session->first_burst,
 							conn->max_xmit_dlength);
 			else
-				task->imm_count = min(out_len,
-							conn->max_xmit_dlength);
+				task->imm_count = min(transfer_length,
+						      conn->max_xmit_dlength);
 			hton24(hdr->dlength, task->imm_count);
 		} else
 			zero_data(hdr->dlength);
 
 		if (!session->initial_r2t_en) {
-			r2t->data_length = min(session->first_burst, out_len) -
+			r2t->data_length = min(session->first_burst,
+					       transfer_length) -
 					       task->imm_count;
 			r2t->data_offset = task->imm_count;
 			r2t->ttt = cpu_to_be32(ISCSI_RESERVED_TAG);
@@ -438,7 +439,6 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 	} else {
 		hdr->flags |= ISCSI_FLAG_CMD_FINAL;
 		zero_data(hdr->dlength);
-		hdr->data_length = cpu_to_be32(scsi_in(sc)->length);
 
 		if (sc->sc_data_direction == DMA_FROM_DEVICE)
 			hdr->flags |= ISCSI_FLAG_CMD_READ;
@@ -466,7 +466,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task)
 			  scsi_bidi_cmnd(sc) ? "bidirectional" :
 			  sc->sc_data_direction == DMA_TO_DEVICE ?
 			  "write" : "read", conn->id, sc, sc->cmnd[0],
-			  task->itt, scsi_bufflen(sc),
+			  task->itt, transfer_length,
 			  scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0,
 			  session->cmdsn,
 			  session->max_cmdsn - session->exp_cmdsn + 1);