Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This patch set includes two large new drivers: mpt3sas (for the next
  gen fusion SAS hardware) and csiostor a FCoE offload driver for the
  Chelsio converged network cards (this includes some net changes which
  I've OK'd with DaveM).

  The rest of the patch is driver updates (qla2xxx, lpfc, hptiop,
  be2iscsi) plus a few assorted updates and bug fixes.

  We also have a Power Management rework in the Upper Layer Drivers
  preparatory to doing ACPI zero power optical devices, but the actual
  enabler is still being worked on.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits)
  [SCSI] mpt3sas: add new driver supporting 12GB SAS
  [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas
  [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222)
  [SCSI] csiostor: remove unneeded memset()
  [SCSI] csiostor: Fix sparse warnings.
  [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode.
  [SCSI] qla2xxx: Dont clear drv active on iospace config failure.
  [SCSI] qla2xxx: Fix typo in qla2xxx driver.
  [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option.
  [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport.
  [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability.
  [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed.
  [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset.
  [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set.
  [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function.
  [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message.
  [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing
  [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level.
  [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin.
  [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response.
  ...

93 files changed, 52192 insertions, 975 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 74bf1aa..142f632 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -603,6 +603,7 @@ config SCSI_ARCMSR
 
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"
+source "drivers/scsi/mpt3sas/Kconfig"
 source "drivers/scsi/ufs/Kconfig"
 
 config SCSI_HPTIOP
@@ -1812,6 +1813,7 @@ config SCSI_VIRTIO
           This is the virtual HBA driver for virtio.  If the kernel will
           be used in a virtual machine, say Y or M.
 
+source "drivers/scsi/csiostor/Kconfig"
 
 endif # SCSI_LOWLEVEL
 
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 888f73a..b607ba4 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
 obj-$(CONFIG_SCSI_QLA_ISCSI)	+= libiscsi.o qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
 obj-$(CONFIG_SCSI_BFA_FC)	+= bfa/
+obj-$(CONFIG_SCSI_CHELSIO_FCOE)	+= csiostor/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
@@ -106,6 +107,7 @@ obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/
+obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
 obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index d79457a..681434e 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -132,11 +132,13 @@ struct inquiry_data {
  *              M O D U L E   G L O B A L S
  */
 
-static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap);
-static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg);
-static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg);
-static unsigned long aac_build_sgraw2(struct scsi_cmnd *scsicmd, struct aac_raw_io2 *rio2, int sg_max);
-static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, int pages, int nseg, int nseg_new);
+static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *sgmap);
+static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg);
+static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg);
+static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
+				struct aac_raw_io2 *rio2, int sg_max);
+static int aac_convert_sgraw2(struct aac_raw_io2 *rio2,
+				int pages, int nseg, int nseg_new);
 static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
 #ifdef AAC_DETAILED_STATUS_INFO
 static char *aac_get_status_string(u32 status);
@@ -971,6 +973,7 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
 {
 	struct aac_dev *dev = fib->dev;
 	u16 fibsize, command;
+	long ret;
 
 	aac_fib_init(fib);
 	if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
@@ -982,7 +985,10 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
 		readcmd2->byteCount = cpu_to_le32(count<<9);
 		readcmd2->cid = cpu_to_le16(scmd_id(cmd));
 		readcmd2->flags = cpu_to_le16(RIO2_IO_TYPE_READ);
-		aac_build_sgraw2(cmd, readcmd2, dev->scsi_host_ptr->sg_tablesize);
+		ret = aac_build_sgraw2(cmd, readcmd2,
+				dev->scsi_host_ptr->sg_tablesize);
+		if (ret < 0)
+			return ret;
 		command = ContainerRawIo2;
 		fibsize = sizeof(struct aac_raw_io2) +
 			((le32_to_cpu(readcmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
@@ -996,7 +1002,9 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
 		readcmd->flags = cpu_to_le16(RIO_TYPE_READ);
 		readcmd->bpTotal = 0;
 		readcmd->bpComplete = 0;
-		aac_build_sgraw(cmd, &readcmd->sg);
+		ret = aac_build_sgraw(cmd, &readcmd->sg);
+		if (ret < 0)
+			return ret;
 		command = ContainerRawIo;
 		fibsize = sizeof(struct aac_raw_io) +
 			((le32_to_cpu(readcmd->sg.count)-1) * sizeof(struct sgentryraw));
@@ -1019,6 +1027,8 @@ static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
 {
 	u16 fibsize;
 	struct aac_read64 *readcmd;
+	long ret;
+
 	aac_fib_init(fib);
 	readcmd = (struct aac_read64 *) fib_data(fib);
 	readcmd->command = cpu_to_le32(VM_CtHostRead64);
@@ -1028,7 +1038,9 @@ static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
 	readcmd->pad   = 0;
 	readcmd->flags = 0;
 
-	aac_build_sg64(cmd, &readcmd->sg);
+	ret = aac_build_sg64(cmd, &readcmd->sg);
+	if (ret < 0)
+		return ret;
 	fibsize = sizeof(struct aac_read64) +
 		((le32_to_cpu(readcmd->sg.count) - 1) *
 		 sizeof (struct sgentry64));
@@ -1050,6 +1062,8 @@ static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32
 {
 	u16 fibsize;
 	struct aac_read *readcmd;
+	long ret;
+
 	aac_fib_init(fib);
 	readcmd = (struct aac_read *) fib_data(fib);
 	readcmd->command = cpu_to_le32(VM_CtBlockRead);
@@ -1057,7 +1071,9 @@ static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32
 	readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
 	readcmd->count = cpu_to_le32(count * 512);
 
-	aac_build_sg(cmd, &readcmd->sg);
+	ret = aac_build_sg(cmd, &readcmd->sg);
+	if (ret < 0)
+		return ret;
 	fibsize = sizeof(struct aac_read) +
 			((le32_to_cpu(readcmd->sg.count) - 1) *
 			 sizeof (struct sgentry));
@@ -1079,6 +1095,7 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
 {
 	struct aac_dev *dev = fib->dev;
 	u16 fibsize, command;
+	long ret;
 
 	aac_fib_init(fib);
 	if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
@@ -1093,7 +1110,10 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
 						   (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
 			cpu_to_le16(RIO2_IO_TYPE_WRITE|RIO2_IO_SUREWRITE) :
 			cpu_to_le16(RIO2_IO_TYPE_WRITE);
-		aac_build_sgraw2(cmd, writecmd2, dev->scsi_host_ptr->sg_tablesize);
+		ret = aac_build_sgraw2(cmd, writecmd2,
+				dev->scsi_host_ptr->sg_tablesize);
+		if (ret < 0)
+			return ret;
 		command = ContainerRawIo2;
 		fibsize = sizeof(struct aac_raw_io2) +
 			((le32_to_cpu(writecmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
@@ -1110,7 +1130,9 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
 			cpu_to_le16(RIO_TYPE_WRITE);
 		writecmd->bpTotal = 0;
 		writecmd->bpComplete = 0;
-		aac_build_sgraw(cmd, &writecmd->sg);
+		ret = aac_build_sgraw(cmd, &writecmd->sg);
+		if (ret < 0)
+			return ret;
 		command = ContainerRawIo;
 		fibsize = sizeof(struct aac_raw_io) +
 			((le32_to_cpu(writecmd->sg.count)-1) * sizeof (struct sgentryraw));
@@ -1133,6 +1155,8 @@ static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba,
 {
 	u16 fibsize;
 	struct aac_write64 *writecmd;
+	long ret;
+
 	aac_fib_init(fib);
 	writecmd = (struct aac_write64 *) fib_data(fib);
 	writecmd->command = cpu_to_le32(VM_CtHostWrite64);
@@ -1142,7 +1166,9 @@ static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba,
 	writecmd->pad	= 0;
 	writecmd->flags	= 0;
 
-	aac_build_sg64(cmd, &writecmd->sg);
+	ret = aac_build_sg64(cmd, &writecmd->sg);
+	if (ret < 0)
+		return ret;
 	fibsize = sizeof(struct aac_write64) +
 		((le32_to_cpu(writecmd->sg.count) - 1) *
 		 sizeof (struct sgentry64));
@@ -1164,6 +1190,8 @@ static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
 {
 	u16 fibsize;
 	struct aac_write *writecmd;
+	long ret;
+
 	aac_fib_init(fib);
 	writecmd = (struct aac_write *) fib_data(fib);
 	writecmd->command = cpu_to_le32(VM_CtBlockWrite);
@@ -1173,7 +1201,9 @@ static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
 	writecmd->sg.count = cpu_to_le32(1);
 	/* ->stable is not used - it did mean which type of write */
 
-	aac_build_sg(cmd, &writecmd->sg);
+	ret = aac_build_sg(cmd, &writecmd->sg);
+	if (ret < 0)
+		return ret;
 	fibsize = sizeof(struct aac_write) +
 		((le32_to_cpu(writecmd->sg.count) - 1) *
 		 sizeof (struct sgentry));
@@ -1235,8 +1265,11 @@ static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
 {
 	u16 fibsize;
 	struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
+	long ret;
 
-	aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg);
+	ret = aac_build_sg64(cmd, (struct sgmap64 *) &srbcmd->sg);
+	if (ret < 0)
+		return ret;
 	srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
 
 	memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
@@ -1263,8 +1296,11 @@ static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
 {
 	u16 fibsize;
 	struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
+	long ret;
 
-	aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg);
+	ret = aac_build_sg(cmd, (struct sgmap *)&srbcmd->sg);
+	if (ret < 0)
+		return ret;
 	srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
 
 	memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
@@ -2870,7 +2906,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
 	return -1;
 }
 
-static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
+static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg)
 {
 	struct aac_dev *dev;
 	unsigned long byte_count = 0;
@@ -2883,7 +2919,8 @@ static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
 	psg->sg[0].count = 0;
 
 	nseg = scsi_dma_map(scsicmd);
-	BUG_ON(nseg < 0);
+	if (nseg < 0)
+		return nseg;
 	if (nseg) {
 		struct scatterlist *sg;
 		int i;
@@ -2912,7 +2949,7 @@ static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
 }
 
 
-static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg)
+static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg)
 {
 	struct aac_dev *dev;
 	unsigned long byte_count = 0;
@@ -2927,7 +2964,8 @@ static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* p
 	psg->sg[0].count = 0;
 
 	nseg = scsi_dma_map(scsicmd);
-	BUG_ON(nseg < 0);
+	if (nseg < 0)
+		return nseg;
 	if (nseg) {
 		struct scatterlist *sg;
 		int i;
@@ -2957,7 +2995,7 @@ static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* p
 	return byte_count;
 }
 
-static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg)
+static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg)
 {
 	unsigned long byte_count = 0;
 	int nseg;
@@ -2972,7 +3010,8 @@ static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw*
 	psg->sg[0].flags = 0;
 
 	nseg = scsi_dma_map(scsicmd);
-	BUG_ON(nseg < 0);
+	if (nseg < 0)
+		return nseg;
 	if (nseg) {
 		struct scatterlist *sg;
 		int i;
@@ -3005,13 +3044,15 @@ static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw*
 	return byte_count;
 }
 
-static unsigned long aac_build_sgraw2(struct scsi_cmnd *scsicmd, struct aac_raw_io2 *rio2, int sg_max)
+static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
+				struct aac_raw_io2 *rio2, int sg_max)
 {
 	unsigned long byte_count = 0;
 	int nseg;
 
 	nseg = scsi_dma_map(scsicmd);
-	BUG_ON(nseg < 0);
+	if (nseg < 0)
+		return nseg;
 	if (nseg) {
 		struct scatterlist *sg;
 		int i, conformable = 0;
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 9e933a8..742f5d7 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 29800
+# define AAC_DRIVER_BUILD 29801
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index a50b6a9..f1733df 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -28,7 +28,7 @@
 /* BladeEngine Generation numbers */
 #define BE_GEN2 2
 #define BE_GEN3 3
-
+#define BE_GEN4	4
 struct be_dma_mem {
 	void *va;
 	dma_addr_t dma;
@@ -84,9 +84,12 @@ static inline void queue_tail_inc(struct be_queue_info *q)
 /*ISCSI */
 
 struct be_eq_obj {
+	bool todo_mcc_cq;
+	bool todo_cq;
 	struct be_queue_info q;
 	struct beiscsi_hba *phba;
 	struct be_queue_info *cq;
+	struct work_struct work_cqs; /* Work Item */
 	struct blk_iopoll	iopoll;
 };
 
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 07d2cb1..5c87768 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -56,7 +56,7 @@ int beiscsi_pci_soft_reset(struct beiscsi_hba *phba)
 	writel(pconline0, (void *)pci_online0_offset);
 	writel(pconline1, (void *)pci_online1_offset);
 
-	sreset = BE2_SET_RESET;
+	sreset |= BE2_SET_RESET;
 	writel(sreset, (void *)pci_reset_offset);
 
 	i = 0;
@@ -133,6 +133,87 @@ unsigned int alloc_mcc_tag(struct beiscsi_hba *phba)
 	return tag;
 }
 
+/*
+ * beiscsi_mccq_compl()- Wait for completion of MBX
+ * @phba: Driver private structure
+ * @tag: Tag for the MBX Command
+ * @wrb: the WRB used for the MBX Command
+ * @cmd_hdr: IOCTL Hdr for the MBX Cmd
+ *
+ * Waits for MBX completion with the passed TAG.
+ *
+ * return
+ * Success: 0
+ * Failure: Non-Zero
+ **/
+int beiscsi_mccq_compl(struct beiscsi_hba *phba,
+		uint32_t tag, struct be_mcc_wrb **wrb,
+		void *cmd_hdr)
+{
+	int rc = 0;
+	uint32_t mcc_tag_response;
+	uint16_t status = 0, addl_status = 0, wrb_num = 0;
+	struct be_mcc_wrb *temp_wrb;
+	struct be_cmd_req_hdr *ioctl_hdr;
+	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+
+	if (beiscsi_error(phba))
+		return -EIO;
+
+	/* wait for the mccq completion */
+	rc = wait_event_interruptible_timeout(
+				phba->ctrl.mcc_wait[tag],
+				phba->ctrl.mcc_numtag[tag],
+				msecs_to_jiffies(
+				BEISCSI_HOST_MBX_TIMEOUT));
+
+	if (rc <= 0) {
+		beiscsi_log(phba, KERN_ERR,
+			    BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
+			    BEISCSI_LOG_CONFIG,
+			    "BC_%d : MBX Cmd Completion timed out\n");
+		rc = -EAGAIN;
+		goto release_mcc_tag;
+	} else
+		rc = 0;
+
+	mcc_tag_response = phba->ctrl.mcc_numtag[tag];
+	status = (mcc_tag_response & CQE_STATUS_MASK);
+	addl_status = ((mcc_tag_response & CQE_STATUS_ADDL_MASK) >>
+			CQE_STATUS_ADDL_SHIFT);
+
+	if (cmd_hdr) {
+		ioctl_hdr = (struct be_cmd_req_hdr *)cmd_hdr;
+	} else {
+		wrb_num = (mcc_tag_response & CQE_STATUS_WRB_MASK) >>
+			   CQE_STATUS_WRB_SHIFT;
+		temp_wrb = (struct be_mcc_wrb *)queue_get_wrb(mccq, wrb_num);
+		ioctl_hdr = embedded_payload(temp_wrb);
+
+		if (wrb)
+			*wrb = temp_wrb;
+	}
+
+	if (status || addl_status) {
+		beiscsi_log(phba, KERN_ERR,
+			    BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
+			    BEISCSI_LOG_CONFIG,
+			    "BC_%d : MBX Cmd Failed for "
+			    "Subsys : %d Opcode : %d with "
+			    "Status : %d and Extd_Status : %d\n",
+			    ioctl_hdr->subsystem,
+			    ioctl_hdr->opcode,
+			    status, addl_status);
+		rc = -EAGAIN;
+	}
+
+release_mcc_tag:
+	/* Release the MCC entry */
+	free_mcc_tag(&phba->ctrl, tag);
+
+	return rc;
+}
+
 void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag)
 {
 	spin_lock(&ctrl->mbox_lock);
@@ -168,11 +249,24 @@ static inline void be_mcc_compl_use(struct be_mcc_compl *compl)
 	compl->flags = 0;
 }
 
+/*
+ * be_mcc_compl_process()- Check the MBX comapletion status
+ * @ctrl: Function specific MBX data structure
+ * @compl: Completion status of MBX Command
+ *
+ * Check for the MBX completion status when BMBX method used
+ *
+ * return
+ * Success: Zero
+ * Failure: Non-Zero
+ **/
 static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
 				struct be_mcc_compl *compl)
 {
 	u16 compl_status, extd_status;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
 	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
+	struct be_cmd_req_hdr *hdr = embedded_payload(wrb);
 
 	be_dws_le_to_cpu(compl, 4);
 
@@ -184,7 +278,10 @@ static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
 
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BC_%d : error in cmd completion: status(compl/extd)=%d/%d\n",
+			    "BC_%d : error in cmd completion: "
+			    "Subsystem : %d Opcode : %d "
+			    "status(compl/extd)=%d/%d\n",
+			    hdr->subsystem, hdr->opcode,
 			    compl_status, extd_status);
 
 		return -EBUSY;
@@ -314,11 +411,24 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba)
 	return status;
 }
 
-/* Wait till no more pending mcc requests are present */
+/*
+ * be_mcc_wait_compl()- Wait for MBX completion
+ * @phba: driver private structure
+ *
+ * Wait till no more pending mcc requests are present
+ *
+ * return
+ * Success: 0
+ * Failure: Non-Zero
+ *
+ **/
 static int be_mcc_wait_compl(struct beiscsi_hba *phba)
 {
 	int i, status;
 	for (i = 0; i < mcc_timeout; i++) {
+		if (beiscsi_error(phba))
+			return -EIO;
+
 		status = beiscsi_process_mcc(phba);
 		if (status)
 			return status;
@@ -330,51 +440,83 @@ static int be_mcc_wait_compl(struct beiscsi_hba *phba)
 	if (i == mcc_timeout) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BC_%d : mccq poll timed out\n");
-
+			    "BC_%d : FW Timed Out\n");
+		phba->fw_timeout = true;
+		beiscsi_ue_detect(phba);
 		return -EBUSY;
 	}
 	return 0;
 }
 
-/* Notify MCC requests and wait for completion */
+/*
+ * be_mcc_notify_wait()- Notify and wait for Compl
+ * @phba: driver private structure
+ *
+ * Notify MCC requests and wait for completion
+ *
+ * return
+ * Success: 0
+ * Failure: Non-Zero
+ **/
 int be_mcc_notify_wait(struct beiscsi_hba *phba)
 {
 	be_mcc_notify(phba);
 	return be_mcc_wait_compl(phba);
 }
 
+/*
+ * be_mbox_db_ready_wait()- Check ready status
+ * @ctrl: Function specific MBX data structure
+ *
+ * Check for the ready status of FW to send BMBX
+ * commands to adapter.
+ *
+ * return
+ * Success: 0
+ * Failure: Non-Zero
+ **/
 static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl)
 {
-#define long_delay 2000
 	void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
-	int cnt = 0, wait = 5;	/* in usecs */
+	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
+	int wait = 0;
 	u32 ready;
 
 	do {
+
+		if (beiscsi_error(phba))
+			return -EIO;
+
 		ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
 		if (ready)
 			break;
 
-		if (cnt > 12000000) {
-			struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
+		if (wait > BEISCSI_HOST_MBX_TIMEOUT) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-				    "BC_%d : mbox_db poll timed out\n");
-
+				    "BC_%d : FW Timed Out\n");
+			phba->fw_timeout = true;
+			beiscsi_ue_detect(phba);
 			return -EBUSY;
 		}
 
-		if (cnt > 50) {
-			wait = long_delay;
-			mdelay(long_delay / 1000);
-		} else
-			udelay(wait);
-		cnt += wait;
+		mdelay(1);
+		wait++;
 	} while (true);
 	return 0;
 }
 
+/*
+ * be_mbox_notify: Notify adapter of new BMBX command
+ * @ctrl: Function specific MBX data structure
+ *
+ * Ring doorbell to inform adapter of a BMBX command
+ * to process
+ *
+ * return
+ * Success: 0
+ * Failure: Non-Zero
+ **/
 int be_mbox_notify(struct be_ctrl_info *ctrl)
 {
 	int status;
@@ -391,13 +533,9 @@ int be_mbox_notify(struct be_ctrl_info *ctrl)
 	iowrite32(val, db);
 
 	status = be_mbox_db_ready_wait(ctrl);
-	if (status != 0) {
-		beiscsi_log(phba, KERN_ERR,
-			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BC_%d : be_mbox_db_ready_wait failed\n");
-
+	if (status)
 		return status;
-	}
+
 	val = 0;
 	val &= ~MPU_MAILBOX_DB_RDY_MASK;
 	val &= ~MPU_MAILBOX_DB_HI_MASK;
@@ -405,13 +543,9 @@ int be_mbox_notify(struct be_ctrl_info *ctrl)
 	iowrite32(val, db);
 
 	status = be_mbox_db_ready_wait(ctrl);
-	if (status != 0) {
-		beiscsi_log(phba, KERN_ERR,
-			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BC_%d : be_mbox_db_ready_wait failed\n");
-
+	if (status)
 		return status;
-	}
+
 	if (be_mcc_compl_is_new(compl)) {
 		status = be_mcc_compl_process(ctrl, &mbox->compl);
 		be_mcc_compl_use(compl);
@@ -499,7 +633,7 @@ void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
 	req_hdr->opcode = opcode;
 	req_hdr->subsystem = subsystem;
 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
-	req_hdr->timeout = 120;
+	req_hdr->timeout = BEISCSI_FW_MBX_TIMEOUT;
 }
 
 static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
@@ -649,18 +783,34 @@ int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
 			OPCODE_COMMON_CQ_CREATE, sizeof(*req));
 
 	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+	if (chip_skh_r(ctrl->pdev)) {
+		req->hdr.version = MBX_CMD_VER2;
+		req->page_size = 1;
+		AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm,
+			      ctxt, coalesce_wm);
+		AMAP_SET_BITS(struct amap_cq_context_v2, nodelay,
+			      ctxt, no_delay);
+		AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt,
+			      __ilog2_u32(cq->len / 256));
+		AMAP_SET_BITS(struct amap_cq_context_v2, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_v2, eventable, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_v2, eqid, ctxt, eq->id);
+		AMAP_SET_BITS(struct amap_cq_context_v2, armed, ctxt, 1);
+	} else {
+		AMAP_SET_BITS(struct amap_cq_context, coalescwm,
+			      ctxt, coalesce_wm);
+		AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+		AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+			      __ilog2_u32(cq->len / 256));
+		AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+		AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+		AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context, func, ctxt,
+			      PCI_FUNC(ctrl->pdev->devfn));
+	}
 
-	AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
-	AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
-	AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
-		      __ilog2_u32(cq->len / 256));
-	AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
-	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
-	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt,
-		      PCI_FUNC(ctrl->pdev->devfn));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 2c8f98d..23397d5 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -57,6 +57,16 @@ struct be_mcc_wrb {
 #define CQE_STATUS_COMPL_SHIFT 0	/* bits 0 - 15 */
 #define CQE_STATUS_EXTD_MASK 0xFFFF
 #define CQE_STATUS_EXTD_SHIFT 16		/* bits 0 - 15 */
+#define CQE_STATUS_ADDL_MASK	0xFF00
+#define CQE_STATUS_MASK	0xFF
+#define CQE_STATUS_ADDL_SHIFT	0x08
+#define CQE_STATUS_WRB_MASK	0xFF0000
+#define CQE_STATUS_WRB_SHIFT	16
+#define BEISCSI_HOST_MBX_TIMEOUT (110 * 1000)
+#define BEISCSI_FW_MBX_TIMEOUT	100
+
+/* MBOX Command VER */
+#define MBX_CMD_VER2	0x02
 
 struct be_mcc_compl {
 	u32 status;		/* dword 0 */
@@ -183,7 +193,8 @@ struct be_cmd_req_hdr {
 	u8 domain;		/* dword 0 */
 	u32 timeout;		/* dword 1 */
 	u32 request_length;	/* dword 2 */
-	u32 rsvd0;		/* dword 3 */
+	u8 version;		/* dword 3 */
+	u8 rsvd0[3];		/* dword 3 */
 };
 
 struct be_cmd_resp_hdr {
@@ -483,10 +494,28 @@ struct amap_cq_context {
 	u8 rsvd5[32];		/* dword 3 */
 } __packed;
 
+struct amap_cq_context_v2 {
+	u8 rsvd0[12];   /* dword 0 */
+	u8 coalescwm[2];    /* dword 0 */
+	u8 nodelay;     /* dword 0 */
+	u8 rsvd1[12];   /* dword 0 */
+	u8 count[2];    /* dword 0 */
+	u8 valid;       /* dword 0 */
+	u8 rsvd2;       /* dword 0 */
+	u8 eventable;   /* dword 0 */
+	u8 eqid[16];    /* dword 1 */
+	u8 rsvd3[15];   /* dword 1 */
+	u8 armed;       /* dword 1 */
+	u8 cqecount[16];/* dword 2 */
+	u8 rsvd4[16];   /* dword 2 */
+	u8 rsvd5[32];   /* dword 3 */
+};
+
 struct be_cmd_req_cq_create {
 	struct be_cmd_req_hdr hdr;
 	u16 num_pages;
-	u16 rsvd0;
+	u8 page_size;
+	u8 rsvd0;
 	u8 context[sizeof(struct amap_cq_context) / 8];
 	struct phys_addr pages[4];
 } __packed;
@@ -663,6 +692,9 @@ unsigned int be_cmd_get_initname(struct beiscsi_hba *phba);
 unsigned int be_cmd_get_port_speed(struct beiscsi_hba *phba);
 
 void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag);
+
+int beiscsi_mccq_compl(struct beiscsi_hba *phba,
+			uint32_t tag, struct be_mcc_wrb **wrb, void *cmd_va);
 /*ISCSI Functuions */
 int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
 
@@ -804,6 +836,59 @@ struct amap_sol_cqe_ring {
 	u8 valid;		/* dword 3 */
 } __packed;
 
+struct amap_sol_cqe_v2 {
+	u8 hw_sts[8];   /* dword 0 */
+	u8 i_sts[8];    /* dword 0 */
+	u8 wrb_index[16];   /* dword 0 */
+	u8 i_exp_cmd_sn[32];    /* dword 1 */
+	u8 code[6]; /* dword 2 */
+	u8 cmd_cmpl;    /* dword 2 */
+	u8 rsvd0;   /* dword 2 */
+	u8 i_cmd_wnd[8];    /* dword 2 */
+	u8 cid[13]; /* dword 2 */
+	u8 u;   /* dword 2 */
+	u8 o;   /* dword 2 */
+	u8 s;   /* dword 2 */
+	u8 i_res_cnt[31];   /* dword 3 */
+	u8 valid;   /* dword 3 */
+} __packed;
+
+struct common_sol_cqe {
+	u32 exp_cmdsn;
+	u32 res_cnt;
+	u16 wrb_index;
+	u16 cid;
+	u8 hw_sts;
+	u8 cmd_wnd;
+	u8 res_flag; /* the s feild of structure */
+	u8 i_resp; /* for skh if cmd_complete is set then i_sts is response */
+	u8 i_flags; /* for skh or the u and o feilds */
+	u8 i_sts; /* for skh if cmd_complete is not-set then i_sts is status */
+};
+
+/*** iSCSI ack/driver message completions ***/
+struct amap_it_dmsg_cqe {
+	u8 ack_num[32]; /* DWORD 0 */
+	u8 pdu_bytes_rcvd[32];  /* DWORD 1 */
+	u8 code[6]; /* DWORD 2 */
+	u8 cid[10]; /* DWORD 2 */
+	u8 wrb_idx[8];  /* DWORD 2 */
+	u8 rsvd0[8];    /* DWORD 2*/
+	u8 rsvd1[31];   /* DWORD 3*/
+	u8 valid;   /* DWORD 3 */
+} __packed;
+
+struct amap_it_dmsg_cqe_v2 {
+	u8 ack_num[32]; /* DWORD 0 */
+	u8 pdu_bytes_rcvd[32];  /* DWORD 1 */
+	u8 code[6]; /* DWORD 2 */
+	u8 rsvd0[10];   /* DWORD 2 */
+	u8 wrb_idx[16]; /* DWORD 2 */
+	u8 rsvd1[16];   /* DWORD 3 */
+	u8 cid[13]; /* DWORD 3 */
+	u8 rsvd2[2];    /* DWORD 3 */
+	u8 valid;   /* DWORD 3 */
+} __packed;
 
 
 /**
@@ -992,8 +1077,6 @@ struct be_cmd_get_all_if_id_req {
 #define CONNECTION_UPLOAD_ABORT_WITH_SEQ 4	/* Abortive upload with reset,
 						 * sequence number by driver  */
 
-/* Returns byte size of given field with a structure. */
-
 /* Returns the number of items in the field array. */
 #define BE_NUMBER_OF_FIELD(_type_, _field_)	\
 	(FIELD_SIZEOF(_type_, _field_)/sizeof((((_type_ *)0)->_field_[0])))\
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index aedb0d9..214d691 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -531,9 +531,9 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 		break;
 	case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
 		if (!if_info.dhcp_state)
-			len = sprintf(buf, "static");
+			len = sprintf(buf, "static\n");
 		else
-			len = sprintf(buf, "dhcp");
+			len = sprintf(buf, "dhcp\n");
 		break;
 	case ISCSI_NET_PARAM_IPV4_SUBNET:
 		len = sprintf(buf, "%pI4\n", &if_info.ip_addr.subnet_mask);
@@ -541,7 +541,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 	case ISCSI_NET_PARAM_VLAN_ENABLED:
 		len = sprintf(buf, "%s\n",
 			     (if_info.vlan_priority == BEISCSI_VLAN_DISABLE)
-			     ? "Disabled" : "Enabled");
+			     ? "Disabled\n" : "Enabled\n");
 		break;
 	case ISCSI_NET_PARAM_VLAN_ID:
 		if (if_info.vlan_priority == BEISCSI_VLAN_DISABLE)
@@ -586,7 +586,7 @@ int be2iscsi_iface_get_param(struct iscsi_iface *iface,
 		len = be2iscsi_get_if_param(phba, iface, param, buf);
 		break;
 	case ISCSI_NET_PARAM_IFACE_ENABLE:
-		len = sprintf(buf, "enabled");
+		len = sprintf(buf, "enabled\n");
 		break;
 	case ISCSI_NET_PARAM_IPV4_GW:
 		memset(&gateway, 0, sizeof(gateway));
@@ -690,11 +690,9 @@ int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
 static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba)
 {
 	int rc;
-	unsigned int tag, wrb_num;
-	unsigned short status, extd_status;
+	unsigned int tag;
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_hba_name *resp;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
 
 	tag = be_cmd_get_initname(phba);
 	if (!tag) {
@@ -702,26 +700,16 @@ static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba)
 			    "BS_%d : Getting Initiator Name Failed\n");
 
 		return -EBUSY;
-	} else
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-				phba->ctrl.mcc_numtag[tag]);
-
-	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+	}
 
-	if (status || extd_status) {
+	rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+	if (rc) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BS_%d : MailBox Command Failed with "
-			    "status = %d extd_status = %d\n",
-			    status, extd_status);
-
-		free_mcc_tag(&phba->ctrl, tag);
-		return -EAGAIN;
+			    "BS_%d : Initiator Name MBX Failed\n");
+		return rc;
 	}
-	wrb = queue_get_wrb(mccq, wrb_num);
-	free_mcc_tag(&phba->ctrl, tag);
+
 	resp = embedded_payload(wrb);
 	rc = sprintf(buf, "%s\n", resp->initiator_name);
 	return rc;
@@ -731,7 +719,6 @@ static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba)
  * beiscsi_get_port_state - Get the Port State
  * @shost : pointer to scsi_host structure
  *
- * returns number of bytes
  */
 static void beiscsi_get_port_state(struct Scsi_Host *shost)
 {
@@ -750,13 +737,12 @@ static void beiscsi_get_port_state(struct Scsi_Host *shost)
  */
 static int beiscsi_get_port_speed(struct Scsi_Host *shost)
 {
-	unsigned int tag, wrb_num;
-	unsigned short status, extd_status;
+	int rc;
+	unsigned int tag;
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_ntwk_link_status_resp *resp;
 	struct beiscsi_hba *phba = iscsi_host_priv(shost);
 	struct iscsi_cls_host *ihost = shost->shost_data;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
 
 	tag = be_cmd_get_port_speed(phba);
 	if (!tag) {
@@ -764,26 +750,14 @@ static int beiscsi_get_port_speed(struct Scsi_Host *shost)
 			    "BS_%d : Getting Port Speed Failed\n");
 
 		 return -EBUSY;
-	 } else
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-				phba->ctrl.mcc_numtag[tag]);
-
-	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-
-	if (status || extd_status) {
+	}
+	rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+	if (rc) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BS_%d : MailBox Command Failed with "
-			    "status = %d extd_status = %d\n",
-			    status, extd_status);
-
-		free_mcc_tag(&phba->ctrl, tag);
-		return -EAGAIN;
+			    "BS_%d : Port Speed MBX Failed\n");
+		return rc;
 	}
-	wrb = queue_get_wrb(mccq, wrb_num);
-	free_mcc_tag(&phba->ctrl, tag);
 	resp = embedded_payload(wrb);
 
 	switch (resp->mac_speed) {
@@ -937,6 +911,14 @@ static void  beiscsi_set_params_for_offld(struct beiscsi_conn *beiscsi_conn,
 		      session->initial_r2t_en);
 	AMAP_SET_BITS(struct amap_beiscsi_offload_params, imd, params,
 		      session->imm_data_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params,
+		      data_seq_inorder, params,
+		      session->dataseq_inorder_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params,
+		      pdu_seq_inorder, params,
+		      session->pdu_inorder_en);
+	AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_r2t, params,
+		      session->max_r2t);
 	AMAP_SET_BITS(struct amap_beiscsi_offload_params, exp_statsn, params,
 		      (conn->exp_statsn - 1));
 }
@@ -1027,12 +1009,10 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 {
 	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
 	struct beiscsi_hba *phba = beiscsi_ep->phba;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
 	struct be_mcc_wrb *wrb;
 	struct tcp_connect_and_offload_out *ptcpcnct_out;
-	unsigned short status, extd_status;
 	struct be_dma_mem nonemb_cmd;
-	unsigned int tag, wrb_num;
+	unsigned int tag;
 	int ret = -ENOMEM;
 
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
@@ -1084,35 +1064,26 @@ static int beiscsi_open_conn(struct iscsi_endpoint *ep,
 		pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 				    nonemb_cmd.va, nonemb_cmd.dma);
 		return -EAGAIN;
-	} else {
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
 	}
-	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-	if (status || extd_status) {
+
+	ret = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+	if (ret) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BS_%d : mgmt_open_connection Failed"
-			    " status = %d extd_status = %d\n",
-			    status, extd_status);
+			    "BS_%d : mgmt_open_connection Failed");
 
-		free_mcc_tag(&phba->ctrl, tag);
 		pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 			    nonemb_cmd.va, nonemb_cmd.dma);
 		goto free_ep;
-	} else {
-		wrb = queue_get_wrb(mccq, wrb_num);
-		free_mcc_tag(&phba->ctrl, tag);
-
-		ptcpcnct_out = embedded_payload(wrb);
-		beiscsi_ep = ep->dd_data;
-		beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
-		beiscsi_ep->cid_vld = 1;
-		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
-			    "BS_%d : mgmt_open_connection Success\n");
 	}
+
+	ptcpcnct_out = embedded_payload(wrb);
+	beiscsi_ep = ep->dd_data;
+	beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
+	beiscsi_ep->cid_vld = 1;
+	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
+		    "BS_%d : mgmt_open_connection Success\n");
+
 	pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 			    nonemb_cmd.va, nonemb_cmd.dma);
 	return 0;
@@ -1150,8 +1121,8 @@ beiscsi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 
 	if (phba->state != BE_ADAPTER_UP) {
 		ret = -EBUSY;
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-			    "BS_%d : The Adapter state is Not UP\n");
+		beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
+			    "BS_%d : The Adapter Port state is Down!!!\n");
 		return ERR_PTR(ret);
 	}
 
@@ -1216,11 +1187,9 @@ static int beiscsi_close_conn(struct  beiscsi_endpoint *beiscsi_ep, int flag)
 			    beiscsi_ep->ep_cid);
 
 		ret = -EAGAIN;
-	} else {
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
-		free_mcc_tag(&phba->ctrl, tag);
 	}
+
+	ret = beiscsi_mccq_compl(phba, tag, NULL, NULL);
 	return ret;
 }
 
@@ -1281,12 +1250,9 @@ void beiscsi_ep_disconnect(struct iscsi_endpoint *ep)
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
 			    "BS_%d : mgmt_invalidate_connection Failed for cid=%d\n",
 			    beiscsi_ep->ep_cid);
-	} else {
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
-		free_mcc_tag(&phba->ctrl, tag);
 	}
 
+	beiscsi_mccq_compl(phba, tag, NULL, NULL);
 	beiscsi_close_conn(beiscsi_ep, tcp_upload_flag);
 	beiscsi_free_ep(beiscsi_ep);
 	beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid);
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index 8b826fc..38eab72 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index ff73f95..48d37dd 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -47,8 +47,6 @@
 static unsigned int be_iopoll_budget = 10;
 static unsigned int be_max_phys_size = 64;
 static unsigned int enable_msix = 1;
-static unsigned int gcrashmode = 0;
-static unsigned int num_hba = 0;
 
 MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
 MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
@@ -153,11 +151,54 @@ BEISCSI_RW_ATTR(log_enable, 0x00,
 		"\t\t\t\tIO Path Events		: 0x10\n"
 		"\t\t\t\tConfiguration Path	: 0x20\n");
 
+DEVICE_ATTR(beiscsi_drvr_ver, S_IRUGO, beiscsi_drvr_ver_disp, NULL);
+DEVICE_ATTR(beiscsi_adapter_family, S_IRUGO, beiscsi_adap_family_disp, NULL);
 struct device_attribute *beiscsi_attrs[] = {
 	&dev_attr_beiscsi_log_enable,
+	&dev_attr_beiscsi_drvr_ver,
+	&dev_attr_beiscsi_adapter_family,
 	NULL,
 };
 
+static char const *cqe_desc[] = {
+	"RESERVED_DESC",
+	"SOL_CMD_COMPLETE",
+	"SOL_CMD_KILLED_DATA_DIGEST_ERR",
+	"CXN_KILLED_PDU_SIZE_EXCEEDS_DSL",
+	"CXN_KILLED_BURST_LEN_MISMATCH",
+	"CXN_KILLED_AHS_RCVD",
+	"CXN_KILLED_HDR_DIGEST_ERR",
+	"CXN_KILLED_UNKNOWN_HDR",
+	"CXN_KILLED_STALE_ITT_TTT_RCVD",
+	"CXN_KILLED_INVALID_ITT_TTT_RCVD",
+	"CXN_KILLED_RST_RCVD",
+	"CXN_KILLED_TIMED_OUT",
+	"CXN_KILLED_RST_SENT",
+	"CXN_KILLED_FIN_RCVD",
+	"CXN_KILLED_BAD_UNSOL_PDU_RCVD",
+	"CXN_KILLED_BAD_WRB_INDEX_ERROR",
+	"CXN_KILLED_OVER_RUN_RESIDUAL",
+	"CXN_KILLED_UNDER_RUN_RESIDUAL",
+	"CMD_KILLED_INVALID_STATSN_RCVD",
+	"CMD_KILLED_INVALID_R2T_RCVD",
+	"CMD_CXN_KILLED_LUN_INVALID",
+	"CMD_CXN_KILLED_ICD_INVALID",
+	"CMD_CXN_KILLED_ITT_INVALID",
+	"CMD_CXN_KILLED_SEQ_OUTOFORDER",
+	"CMD_CXN_KILLED_INVALID_DATASN_RCVD",
+	"CXN_INVALIDATE_NOTIFY",
+	"CXN_INVALIDATE_INDEX_NOTIFY",
+	"CMD_INVALIDATED_NOTIFY",
+	"UNSOL_HDR_NOTIFY",
+	"UNSOL_DATA_NOTIFY",
+	"UNSOL_DATA_DIGEST_ERROR_NOTIFY",
+	"DRIVERMSG_NOTIFY",
+	"CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN",
+	"SOL_CMD_KILLED_DIF_ERR",
+	"CXN_KILLED_SYN_RCVD",
+	"CXN_KILLED_IMM_DATA_RCVD"
+};
+
 static int beiscsi_slave_configure(struct scsi_device *sdev)
 {
 	blk_queue_max_segment_size(sdev->request_queue, 65536);
@@ -226,11 +267,9 @@ static int beiscsi_eh_abort(struct scsi_cmnd *sc)
 				    nonemb_cmd.va, nonemb_cmd.dma);
 
 		return FAILED;
-	} else {
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
-		free_mcc_tag(&phba->ctrl, tag);
 	}
+
+	beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va);
 	pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 			    nonemb_cmd.va, nonemb_cmd.dma);
 	return iscsi_eh_abort(sc);
@@ -301,11 +340,9 @@ static int beiscsi_eh_device_reset(struct scsi_cmnd *sc)
 		pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 				    nonemb_cmd.va, nonemb_cmd.dma);
 		return FAILED;
-	} else {
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
-		free_mcc_tag(&phba->ctrl, tag);
 	}
+
+	beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va);
 	pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 			    nonemb_cmd.va, nonemb_cmd.dma);
 	return iscsi_eh_device_reset(sc);
@@ -482,6 +519,7 @@ static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
+	{ PCI_DEVICE(ELX_VENDOR_ID, OC_SKH_ID1) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
@@ -730,7 +768,7 @@ static irqreturn_t be_isr_mcc(int irq, void *dev_id)
 		     resource_id) / 32] &
 		     EQE_RESID_MASK) >> 16) == mcc->id) {
 			spin_lock_irqsave(&phba->isr_lock, flags);
-			phba->todo_mcc_cq = 1;
+			pbe_eq->todo_mcc_cq = true;
 			spin_unlock_irqrestore(&phba->isr_lock, flags);
 		}
 		AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
@@ -738,8 +776,8 @@ static irqreturn_t be_isr_mcc(int irq, void *dev_id)
 		eqe = queue_tail_node(eq);
 		num_eq_processed++;
 	}
-	if (phba->todo_mcc_cq)
-		queue_work(phba->wq, &phba->work_cqs);
+	if (pbe_eq->todo_mcc_cq)
+		queue_work(phba->wq, &pbe_eq->work_cqs);
 	if (num_eq_processed)
 		hwi_ring_eq_db(phba, eq->id, 1,	num_eq_processed, 1, 1);
 
@@ -779,29 +817,26 @@ static irqreturn_t be_isr_msix(int irq, void *dev_id)
 			eqe = queue_tail_node(eq);
 			num_eq_processed++;
 		}
-		if (num_eq_processed)
-			hwi_ring_eq_db(phba, eq->id, 1,	num_eq_processed, 0, 1);
-
-		return IRQ_HANDLED;
 	} else {
 		while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
 						& EQE_VALID_MASK) {
 			spin_lock_irqsave(&phba->isr_lock, flags);
-			phba->todo_cq = 1;
+			pbe_eq->todo_cq = true;
 			spin_unlock_irqrestore(&phba->isr_lock, flags);
 			AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
 			queue_tail_inc(eq);
 			eqe = queue_tail_node(eq);
 			num_eq_processed++;
 		}
-		if (phba->todo_cq)
-			queue_work(phba->wq, &phba->work_cqs);
 
-		if (num_eq_processed)
-			hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 1, 1);
-
-		return IRQ_HANDLED;
+		if (pbe_eq->todo_cq)
+			queue_work(phba->wq, &pbe_eq->work_cqs);
 	}
+
+	if (num_eq_processed)
+		hwi_ring_eq_db(phba, eq->id, 1,	num_eq_processed, 0, 1);
+
+	return IRQ_HANDLED;
 }
 
 /**
@@ -849,7 +884,7 @@ static irqreturn_t be_isr(int irq, void *dev_id)
 			     resource_id) / 32] &
 			     EQE_RESID_MASK) >> 16) == mcc->id) {
 				spin_lock_irqsave(&phba->isr_lock, flags);
-				phba->todo_mcc_cq = 1;
+				pbe_eq->todo_mcc_cq = true;
 				spin_unlock_irqrestore(&phba->isr_lock, flags);
 				num_mcceq_processed++;
 			} else {
@@ -862,8 +897,8 @@ static irqreturn_t be_isr(int irq, void *dev_id)
 			eqe = queue_tail_node(eq);
 		}
 		if (num_ioeq_processed || num_mcceq_processed) {
-			if (phba->todo_mcc_cq)
-				queue_work(phba->wq, &phba->work_cqs);
+			if (pbe_eq->todo_mcc_cq)
+				queue_work(phba->wq, &pbe_eq->work_cqs);
 
 			if ((num_mcceq_processed) && (!num_ioeq_processed))
 				hwi_ring_eq_db(phba, eq->id, 0,
@@ -886,11 +921,11 @@ static irqreturn_t be_isr(int irq, void *dev_id)
 			     resource_id) / 32] &
 			     EQE_RESID_MASK) >> 16) != cq->id) {
 				spin_lock_irqsave(&phba->isr_lock, flags);
-				phba->todo_mcc_cq = 1;
+				pbe_eq->todo_mcc_cq = true;
 				spin_unlock_irqrestore(&phba->isr_lock, flags);
 			} else {
 				spin_lock_irqsave(&phba->isr_lock, flags);
-				phba->todo_cq = 1;
+				pbe_eq->todo_cq = true;
 				spin_unlock_irqrestore(&phba->isr_lock, flags);
 			}
 			AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
@@ -898,8 +933,8 @@ static irqreturn_t be_isr(int irq, void *dev_id)
 			eqe = queue_tail_node(eq);
 			num_ioeq_processed++;
 		}
-		if (phba->todo_cq || phba->todo_mcc_cq)
-			queue_work(phba->wq, &phba->work_cqs);
+		if (pbe_eq->todo_cq || pbe_eq->todo_mcc_cq)
+			queue_work(phba->wq, &pbe_eq->work_cqs);
 
 		if (num_ioeq_processed) {
 			hwi_ring_eq_db(phba, eq->id, 0,
@@ -1211,7 +1246,8 @@ free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
 
 static void
 be_complete_io(struct beiscsi_conn *beiscsi_conn,
-	       struct iscsi_task *task, struct sol_cqe *psol)
+		struct iscsi_task *task,
+		struct common_sol_cqe *csol_cqe)
 {
 	struct beiscsi_io_task *io_task = task->dd_data;
 	struct be_status_bhs *sts_bhs =
@@ -1221,20 +1257,14 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn,
 	u32 resid = 0, exp_cmdsn, max_cmdsn;
 	u8 rsp, status, flags;
 
-	exp_cmdsn = (psol->
-			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
-			& SOL_EXP_CMD_SN_MASK);
-	max_cmdsn = ((psol->
-			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
-			& SOL_EXP_CMD_SN_MASK) +
-			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
-				/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
-	rsp = ((psol->dw[offsetof(struct amap_sol_cqe, i_resp) / 32]
-						& SOL_RESP_MASK) >> 16);
-	status = ((psol->dw[offsetof(struct amap_sol_cqe, i_sts) / 32]
-						& SOL_STS_MASK) >> 8);
-	flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
-					& SOL_FLAGS_MASK) >> 24) | 0x80;
+	exp_cmdsn = csol_cqe->exp_cmdsn;
+	max_cmdsn = (csol_cqe->exp_cmdsn +
+		     csol_cqe->cmd_wnd - 1);
+	rsp = csol_cqe->i_resp;
+	status = csol_cqe->i_sts;
+	flags = csol_cqe->i_flags;
+	resid = csol_cqe->res_cnt;
+
 	if (!task->sc) {
 		if (io_task->scsi_cmnd)
 			scsi_dma_unmap(io_task->scsi_cmnd);
@@ -1249,9 +1279,6 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn,
 
 	/* bidi not initially supported */
 	if (flags & (ISCSI_FLAG_CMD_UNDERFLOW | ISCSI_FLAG_CMD_OVERFLOW)) {
-		resid = (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) /
-				32] & SOL_RES_CNT_MASK);
-
 		if (!status && (flags & ISCSI_FLAG_CMD_OVERFLOW))
 			task->sc->result = DID_ERROR << 16;
 
@@ -1273,13 +1300,8 @@ be_complete_io(struct beiscsi_conn *beiscsi_conn,
 		       min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
 	}
 
-	if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) {
-		if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
-							& SOL_RES_CNT_MASK)
-			 conn->rxdata_octets += (psol->
-			     dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
-			     & SOL_RES_CNT_MASK);
-	}
+	if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ)
+		conn->rxdata_octets += resid;
 unmap:
 	scsi_dma_unmap(io_task->scsi_cmnd);
 	iscsi_complete_scsi_task(task, exp_cmdsn, max_cmdsn);
@@ -1287,7 +1309,8 @@ unmap:
 
 static void
 be_complete_logout(struct beiscsi_conn *beiscsi_conn,
-		   struct iscsi_task *task, struct sol_cqe *psol)
+		    struct iscsi_task *task,
+		    struct common_sol_cqe *csol_cqe)
 {
 	struct iscsi_logout_rsp *hdr;
 	struct beiscsi_io_task *io_task = task->dd_data;
@@ -1297,18 +1320,11 @@ be_complete_logout(struct beiscsi_conn *beiscsi_conn,
 	hdr->opcode = ISCSI_OP_LOGOUT_RSP;
 	hdr->t2wait = 5;
 	hdr->t2retain = 0;
-	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
-					& SOL_FLAGS_MASK) >> 24) | 0x80;
-	hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
-					32] & SOL_RESP_MASK);
-	hdr->exp_cmdsn = cpu_to_be32(psol->
-			dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
-					& SOL_EXP_CMD_SN_MASK);
-	hdr->max_cmdsn = be32_to_cpu((psol->
-			 dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
-					& SOL_EXP_CMD_SN_MASK) +
-			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
-					/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	hdr->flags = csol_cqe->i_flags;
+	hdr->response = csol_cqe->i_resp;
+	hdr->exp_cmdsn = csol_cqe->exp_cmdsn;
+	hdr->max_cmdsn = (csol_cqe->exp_cmdsn + csol_cqe->cmd_wnd - 1);
+
 	hdr->dlength[0] = 0;
 	hdr->dlength[1] = 0;
 	hdr->dlength[2] = 0;
@@ -1319,7 +1335,8 @@ be_complete_logout(struct beiscsi_conn *beiscsi_conn,
 
 static void
 be_complete_tmf(struct beiscsi_conn *beiscsi_conn,
-		struct iscsi_task *task, struct sol_cqe *psol)
+		 struct iscsi_task *task,
+		 struct common_sol_cqe *csol_cqe)
 {
 	struct iscsi_tm_rsp *hdr;
 	struct iscsi_conn *conn = beiscsi_conn->conn;
@@ -1327,16 +1344,12 @@ be_complete_tmf(struct beiscsi_conn *beiscsi_conn,
 
 	hdr = (struct iscsi_tm_rsp *)task->hdr;
 	hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP;
-	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
-					& SOL_FLAGS_MASK) >> 24) | 0x80;
-	hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
-					32] & SOL_RESP_MASK);
-	hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
-				    i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
-	hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
-			i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
-			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
-			/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	hdr->flags = csol_cqe->i_flags;
+	hdr->response = csol_cqe->i_resp;
+	hdr->exp_cmdsn = csol_cqe->exp_cmdsn;
+	hdr->max_cmdsn = (csol_cqe->exp_cmdsn +
+			  csol_cqe->cmd_wnd - 1);
+
 	hdr->itt = io_task->libiscsi_itt;
 	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
 }
@@ -1352,15 +1365,24 @@ hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
 	struct beiscsi_io_task *io_task;
 	struct iscsi_conn *conn = beiscsi_conn->conn;
 	struct iscsi_session *session = conn->session;
+	uint16_t wrb_index, cid;
 
 	phwi_ctrlr = phba->phwi_ctrlr;
-	pwrb_context = &phwi_ctrlr->wrb_context[((psol->
-				dw[offsetof(struct amap_sol_cqe, cid) / 32] &
-				SOL_CID_MASK) >> 6) -
-				phba->fw_config.iscsi_cid_start];
-	pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
-				dw[offsetof(struct amap_sol_cqe, wrb_index) /
-				32] & SOL_WRB_INDEX_MASK) >> 16)];
+	if (chip_skh_r(phba->pcidev)) {
+		wrb_index = AMAP_GET_BITS(struct amap_it_dmsg_cqe_v2,
+					  wrb_idx, psol);
+		cid = AMAP_GET_BITS(struct amap_it_dmsg_cqe_v2,
+				    cid, psol);
+	} else {
+		wrb_index = AMAP_GET_BITS(struct amap_it_dmsg_cqe,
+					  wrb_idx, psol);
+		cid = AMAP_GET_BITS(struct amap_it_dmsg_cqe,
+				    cid, psol);
+	}
+
+	pwrb_context = &phwi_ctrlr->wrb_context[
+			cid - phba->fw_config.iscsi_cid_start];
+	pwrb_handle = pwrb_context->pwrb_handle_basestd[wrb_index];
 	task = pwrb_handle->pio_handle;
 
 	io_task = task->dd_data;
@@ -1374,26 +1396,78 @@ hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
 
 static void
 be_complete_nopin_resp(struct beiscsi_conn *beiscsi_conn,
-		       struct iscsi_task *task, struct sol_cqe *psol)
+			struct iscsi_task *task,
+			struct common_sol_cqe *csol_cqe)
 {
 	struct iscsi_nopin *hdr;
 	struct iscsi_conn *conn = beiscsi_conn->conn;
 	struct beiscsi_io_task *io_task = task->dd_data;
 
 	hdr = (struct iscsi_nopin *)task->hdr;
-	hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
-			& SOL_FLAGS_MASK) >> 24) | 0x80;
-	hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
-				     i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
-	hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
-			i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
-			((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
-			/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+	hdr->flags = csol_cqe->i_flags;
+	hdr->exp_cmdsn = cpu_to_be32(csol_cqe->exp_cmdsn);
+	hdr->max_cmdsn = be32_to_cpu(hdr->exp_cmdsn +
+			 csol_cqe->cmd_wnd - 1);
+
 	hdr->opcode = ISCSI_OP_NOOP_IN;
 	hdr->itt = io_task->libiscsi_itt;
 	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
 }
 
+static void adapter_get_sol_cqe(struct beiscsi_hba *phba,
+		struct sol_cqe *psol,
+		struct common_sol_cqe *csol_cqe)
+{
+	if (chip_skh_r(phba->pcidev)) {
+		csol_cqe->exp_cmdsn = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						    i_exp_cmd_sn, psol);
+		csol_cqe->res_cnt = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						  i_res_cnt, psol);
+		csol_cqe->wrb_index = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						    wrb_index, psol);
+		csol_cqe->cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+					      cid, psol);
+		csol_cqe->hw_sts = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						 hw_sts, psol);
+		csol_cqe->cmd_wnd = AMAP_GET_BITS(struct amap_sol_cqe,
+						  i_cmd_wnd, psol);
+		if (AMAP_GET_BITS(struct amap_sol_cqe_v2,
+				  cmd_cmpl, psol))
+			csol_cqe->i_sts = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+							i_sts, psol);
+		else
+			csol_cqe->i_resp = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+							 i_sts, psol);
+		if (AMAP_GET_BITS(struct amap_sol_cqe_v2,
+				  u, psol))
+			csol_cqe->i_flags = ISCSI_FLAG_CMD_UNDERFLOW;
+
+		if (AMAP_GET_BITS(struct amap_sol_cqe_v2,
+				  o, psol))
+			csol_cqe->i_flags |= ISCSI_FLAG_CMD_OVERFLOW;
+	} else {
+		csol_cqe->exp_cmdsn = AMAP_GET_BITS(struct amap_sol_cqe,
+						    i_exp_cmd_sn, psol);
+		csol_cqe->res_cnt = AMAP_GET_BITS(struct amap_sol_cqe,
+						  i_res_cnt, psol);
+		csol_cqe->cmd_wnd = AMAP_GET_BITS(struct amap_sol_cqe,
+						  i_cmd_wnd, psol);
+		csol_cqe->wrb_index = AMAP_GET_BITS(struct amap_sol_cqe,
+						    wrb_index, psol);
+		csol_cqe->cid = AMAP_GET_BITS(struct amap_sol_cqe,
+					      cid, psol);
+		csol_cqe->hw_sts = AMAP_GET_BITS(struct amap_sol_cqe,
+						 hw_sts, psol);
+		csol_cqe->i_resp = AMAP_GET_BITS(struct amap_sol_cqe,
+						 i_resp, psol);
+		csol_cqe->i_sts = AMAP_GET_BITS(struct amap_sol_cqe,
+						i_sts, psol);
+		csol_cqe->i_flags = AMAP_GET_BITS(struct amap_sol_cqe,
+						  i_flags, psol);
+	}
+}
+
+
 static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 			     struct beiscsi_hba *phba, struct sol_cqe *psol)
 {
@@ -1405,19 +1479,22 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 	unsigned int type;
 	struct iscsi_conn *conn = beiscsi_conn->conn;
 	struct iscsi_session *session = conn->session;
+	struct common_sol_cqe csol_cqe = {0};
 
 	phwi_ctrlr = phba->phwi_ctrlr;
-	pwrb_context = &phwi_ctrlr->wrb_context[((psol->dw[offsetof
-				(struct amap_sol_cqe, cid) / 32]
-				& SOL_CID_MASK) >> 6) -
-				phba->fw_config.iscsi_cid_start];
-	pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
-				dw[offsetof(struct amap_sol_cqe, wrb_index) /
-				32] & SOL_WRB_INDEX_MASK) >> 16)];
+
+	/* Copy the elements to a common structure */
+	adapter_get_sol_cqe(phba, psol, &csol_cqe);
+
+	pwrb_context = &phwi_ctrlr->wrb_context[
+			csol_cqe.cid - phba->fw_config.iscsi_cid_start];
+
+	pwrb_handle = pwrb_context->pwrb_handle_basestd[
+		      csol_cqe.wrb_index];
+
 	task = pwrb_handle->pio_handle;
 	pwrb = pwrb_handle->pwrb;
-	type = (pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
-				 WRB_TYPE_MASK) >> 28;
+	type = ((struct beiscsi_io_task *)task->dd_data)->wrb_type;
 
 	spin_lock_bh(&session->lock);
 	switch (type) {
@@ -1425,17 +1502,16 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 	case HWH_TYPE_IO_RD:
 		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) ==
 		     ISCSI_OP_NOOP_OUT)
-			be_complete_nopin_resp(beiscsi_conn, task, psol);
+			be_complete_nopin_resp(beiscsi_conn, task, &csol_cqe);
 		else
-			be_complete_io(beiscsi_conn, task, psol);
+			be_complete_io(beiscsi_conn, task, &csol_cqe);
 		break;
 
 	case HWH_TYPE_LOGOUT:
 		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT)
-			be_complete_logout(beiscsi_conn, task, psol);
+			be_complete_logout(beiscsi_conn, task, &csol_cqe);
 		else
-			be_complete_tmf(beiscsi_conn, task, psol);
-
+			be_complete_tmf(beiscsi_conn, task, &csol_cqe);
 		break;
 
 	case HWH_TYPE_LOGIN:
@@ -1446,7 +1522,7 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 		break;
 
 	case HWH_TYPE_NOP:
-		be_complete_nopin_resp(beiscsi_conn, task, psol);
+		be_complete_nopin_resp(beiscsi_conn, task, &csol_cqe);
 		break;
 
 	default:
@@ -1454,10 +1530,8 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
 			    "BM_%d : In hwi_complete_cmd, unknown type = %d"
 			    "wrb_index 0x%x CID 0x%x\n", type,
-			    ((psol->dw[offsetof(struct amap_iscsi_wrb,
-			    type) / 32] & SOL_WRB_INDEX_MASK) >> 16),
-			    ((psol->dw[offsetof(struct amap_sol_cqe,
-			    cid) / 32] & SOL_CID_MASK) >> 6));
+			    csol_cqe.wrb_index,
+			    csol_cqe.cid);
 		break;
 	}
 
@@ -1485,13 +1559,26 @@ hwi_get_async_handle(struct beiscsi_hba *phba,
 	struct list_head *pbusy_list;
 	struct async_pdu_handle *pasync_handle = NULL;
 	unsigned char is_header = 0;
+	unsigned int index, dpl;
+
+	if (chip_skh_r(phba->pcidev)) {
+		dpl = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe_v2,
+				    dpl, pdpdu_cqe);
+		index = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe_v2,
+				      index, pdpdu_cqe);
+	} else {
+		dpl = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe,
+				    dpl, pdpdu_cqe);
+		index = AMAP_GET_BITS(struct amap_i_t_dpdu_cqe,
+				      index, pdpdu_cqe);
+	}
 
 	phys_addr.u.a32.address_lo =
-	    pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_lo) / 32] -
-	    ((pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
-						& PDUCQE_DPL_MASK) >> 16);
+		(pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+					db_addr_lo) / 32] - dpl);
 	phys_addr.u.a32.address_hi =
-	    pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_hi) / 32];
+		pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+				       db_addr_hi) / 32];
 
 	phys_addr.u.a64.address =
 			*((unsigned long long *)(&phys_addr.u.a64.address));
@@ -1501,14 +1588,12 @@ hwi_get_async_handle(struct beiscsi_hba *phba,
 	case UNSOL_HDR_NOTIFY:
 		is_header = 1;
 
-		pbusy_list = hwi_get_async_busy_list(pasync_ctx, 1,
-			(pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
-			index) / 32] & PDUCQE_INDEX_MASK));
+		 pbusy_list = hwi_get_async_busy_list(pasync_ctx,
+						      is_header, index);
 		break;
 	case UNSOL_DATA_NOTIFY:
-		pbusy_list = hwi_get_async_busy_list(pasync_ctx, 0, (pdpdu_cqe->
-					dw[offsetof(struct amap_i_t_dpdu_cqe,
-					index) / 32] & PDUCQE_INDEX_MASK));
+		 pbusy_list = hwi_get_async_busy_list(pasync_ctx,
+						      is_header, index);
 		break;
 	default:
 		pbusy_list = NULL;
@@ -1531,12 +1616,9 @@ hwi_get_async_handle(struct beiscsi_hba *phba,
 	pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid -
 					     phba->fw_config.iscsi_cid_start;
 	pasync_handle->is_header = is_header;
-	pasync_handle->buffer_len = ((pdpdu_cqe->
-			dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
-			& PDUCQE_DPL_MASK) >> 16);
+	pasync_handle->buffer_len = dpl;
+	*pcq_index = index;
 
-	*pcq_index = (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
-			index) / 32] & PDUCQE_INDEX_MASK);
 	return pasync_handle;
 }
 
@@ -1914,6 +1996,13 @@ static void  beiscsi_process_mcc_isr(struct beiscsi_hba *phba)
 
 }
 
+/**
+ * beiscsi_process_cq()- Process the Completion Queue
+ * @pbe_eq: Event Q on which the Completion has come
+ *
+ * return
+ *     Number of Completion Entries processed.
+ **/
 static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 {
 	struct be_queue_info *cq;
@@ -1935,12 +2024,24 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 	       CQE_VALID_MASK) {
 		be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
 
-		cid = ((sol->dw[offsetof(struct amap_sol_cqe, cid)/32] &
-		      CQE_CID_MASK) >> 6);
-		code = (sol->dw[offsetof(struct amap_sol_cqe, code)/32] &
-		       CQE_CODE_MASK);
-		ep = phba->ep_array[cid - phba->fw_config.iscsi_cid_start];
+		 code = (sol->dw[offsetof(struct amap_sol_cqe, code) /
+			 32] & CQE_CODE_MASK);
+
+		 /* Get the CID */
+		if (chip_skh_r(phba->pcidev)) {
+			if ((code == DRIVERMSG_NOTIFY) ||
+			    (code == UNSOL_HDR_NOTIFY) ||
+			    (code == UNSOL_DATA_NOTIFY))
+				cid = AMAP_GET_BITS(
+						    struct amap_i_t_dpdu_cqe_v2,
+						    cid, sol);
+			 else
+				 cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						     cid, sol);
+		   } else
+			 cid = AMAP_GET_BITS(struct amap_sol_cqe, cid, sol);
 
+		ep = phba->ep_array[cid - phba->fw_config.iscsi_cid_start];
 		beiscsi_ep = ep->dd_data;
 		beiscsi_conn = beiscsi_ep->conn;
 
@@ -1958,7 +2059,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case DRIVERMSG_NOTIFY:
 			beiscsi_log(phba, KERN_INFO,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Received DRIVERMSG_NOTIFY\n");
+				    "BM_%d : Received %s[%d] on CID : %d\n",
+				    cqe_desc[code], code, cid);
 
 			dmsg = (struct dmsg_cqe *)sol;
 			hwi_complete_drvr_msgs(beiscsi_conn, phba, sol);
@@ -1966,7 +2068,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case UNSOL_HDR_NOTIFY:
 			beiscsi_log(phba, KERN_INFO,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Received UNSOL_HDR_ NOTIFY\n");
+				    "BM_%d : Received %s[%d] on CID : %d\n",
+				    cqe_desc[code], code, cid);
 
 			hwi_process_default_pdu_ring(beiscsi_conn, phba,
 					     (struct i_t_dpdu_cqe *)sol);
@@ -1974,7 +2077,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case UNSOL_DATA_NOTIFY:
 			beiscsi_log(phba, KERN_INFO,
 				    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
-				    "BM_%d : Received UNSOL_DATA_NOTIFY\n");
+				    "BM_%d : Received %s[%d] on CID : %d\n",
+				    cqe_desc[code], code, cid);
 
 			hwi_process_default_pdu_ring(beiscsi_conn, phba,
 					     (struct i_t_dpdu_cqe *)sol);
@@ -1984,8 +2088,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case CXN_INVALIDATE_NOTIFY:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Ignoring CQ Error notification for"
-				    " cmd/cxn invalidate\n");
+				    "BM_%d : Ignoring %s[%d] on CID : %d\n",
+				    cqe_desc[code], code, cid);
 			break;
 		case SOL_CMD_KILLED_DATA_DIGEST_ERR:
 		case CMD_KILLED_INVALID_STATSN_RCVD:
@@ -1997,14 +2101,14 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case CMD_CXN_KILLED_INVALID_DATASN_RCVD:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
-				    "BM_%d : CQ Error notification for cmd.. "
-				    "code %d cid 0x%x\n", code, cid);
+				    "BM_%d : Cmd Notification %s[%d] on CID : %d\n",
+				    cqe_desc[code], code,  cid);
 			break;
 		case UNSOL_DATA_DIGEST_ERROR_NOTIFY:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Digest error on def pdu ring,"
-				    " dropping..\n");
+				    "BM_%d :  Dropping %s[%d] on DPDU ring on CID : %d\n",
+				    cqe_desc[code], code, cid);
 			hwi_flush_default_pdu_buffer(phba, beiscsi_conn,
 					     (struct i_t_dpdu_cqe *) sol);
 			break;
@@ -2017,6 +2121,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case CXN_KILLED_INVALID_ITT_TTT_RCVD:
 		case CXN_KILLED_TIMED_OUT:
 		case CXN_KILLED_FIN_RCVD:
+		case CXN_KILLED_RST_SENT:
+		case CXN_KILLED_RST_RCVD:
 		case CXN_KILLED_BAD_UNSOL_PDU_RCVD:
 		case CXN_KILLED_BAD_WRB_INDEX_ERROR:
 		case CXN_KILLED_OVER_RUN_RESIDUAL:
@@ -2024,19 +2130,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : CQ Error %d, reset CID 0x%x...\n",
-				    code, cid);
-			if (beiscsi_conn)
-				iscsi_conn_failure(beiscsi_conn->conn,
-						   ISCSI_ERR_CONN_FAILED);
-			break;
-		case CXN_KILLED_RST_SENT:
-		case CXN_KILLED_RST_RCVD:
-			beiscsi_log(phba, KERN_ERR,
-				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : CQ Error %d, reset"
-				    "received/sent on CID 0x%x...\n",
-				    code, cid);
+				    "BM_%d : Event %s[%d] received on CID : %d\n",
+				    cqe_desc[code], code, cid);
 			if (beiscsi_conn)
 				iscsi_conn_failure(beiscsi_conn->conn,
 						   ISCSI_ERR_CONN_FAILED);
@@ -2044,8 +2139,8 @@ static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
 		default:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : CQ Error Invalid code= %d "
-				    "received on CID 0x%x...\n",
+				    "BM_%d : Invalid CQE Event Received Code : %d"
+				    "CID 0x%x...\n",
 				    code, cid);
 			break;
 		}
@@ -2068,30 +2163,30 @@ void beiscsi_process_all_cqs(struct work_struct *work)
 	unsigned long flags;
 	struct hwi_controller *phwi_ctrlr;
 	struct hwi_context_memory *phwi_context;
-	struct be_eq_obj *pbe_eq;
-	struct beiscsi_hba *phba =
-	    container_of(work, struct beiscsi_hba, work_cqs);
+	struct beiscsi_hba *phba;
+	struct be_eq_obj *pbe_eq =
+	    container_of(work, struct be_eq_obj, work_cqs);
 
+	phba = pbe_eq->phba;
 	phwi_ctrlr = phba->phwi_ctrlr;
 	phwi_context = phwi_ctrlr->phwi_ctxt;
-	if (phba->msix_enabled)
-		pbe_eq = &phwi_context->be_eq[phba->num_cpus];
-	else
-		pbe_eq = &phwi_context->be_eq[0];
 
-	if (phba->todo_mcc_cq) {
+	if (pbe_eq->todo_mcc_cq) {
 		spin_lock_irqsave(&phba->isr_lock, flags);
-		phba->todo_mcc_cq = 0;
+		pbe_eq->todo_mcc_cq = false;
 		spin_unlock_irqrestore(&phba->isr_lock, flags);
 		beiscsi_process_mcc_isr(phba);
 	}
 
-	if (phba->todo_cq) {
+	if (pbe_eq->todo_cq) {
 		spin_lock_irqsave(&phba->isr_lock, flags);
-		phba->todo_cq = 0;
+		pbe_eq->todo_cq = false;
 		spin_unlock_irqrestore(&phba->isr_lock, flags);
 		beiscsi_process_cq(pbe_eq);
 	}
+
+	/* rearm EQ for further interrupts */
+	hwi_ring_eq_db(phba, pbe_eq->q.id, 0, 0, 1, 1);
 }
 
 static int be_iopoll(struct blk_iopoll *iop, int budget)
@@ -2115,6 +2210,101 @@ static int be_iopoll(struct blk_iopoll *iop, int budget)
 }
 
 static void
+hwi_write_sgl_v2(struct iscsi_wrb *pwrb, struct scatterlist *sg,
+		  unsigned int num_sg, struct beiscsi_io_task *io_task)
+{
+	struct iscsi_sge *psgl;
+	unsigned int sg_len, index;
+	unsigned int sge_len = 0;
+	unsigned long long addr;
+	struct scatterlist *l_sg;
+	unsigned int offset;
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, iscsi_bhs_addr_lo, pwrb,
+		      io_task->bhs_pa.u.a32.address_lo);
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, iscsi_bhs_addr_hi, pwrb,
+		      io_task->bhs_pa.u.a32.address_hi);
+
+	l_sg = sg;
+	for (index = 0; (index < num_sg) && (index < 2); index++,
+			sg = sg_next(sg)) {
+		if (index == 0) {
+			sg_len = sg_dma_len(sg);
+			addr = (u64) sg_dma_address(sg);
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge0_addr_lo, pwrb,
+				      lower_32_bits(addr));
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge0_addr_hi, pwrb,
+				      upper_32_bits(addr));
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge0_len, pwrb,
+				      sg_len);
+			sge_len = sg_len;
+		} else {
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_r2t_offset,
+				      pwrb, sge_len);
+			sg_len = sg_dma_len(sg);
+			addr = (u64) sg_dma_address(sg);
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge1_addr_lo, pwrb,
+				      lower_32_bits(addr));
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge1_addr_hi, pwrb,
+				      upper_32_bits(addr));
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+				      sge1_len, pwrb,
+				      sg_len);
+		}
+	}
+	psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
+	memset(psgl, 0, sizeof(*psgl) * BE2_SGE);
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len - 2);
+
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+		      io_task->bhs_pa.u.a32.address_hi);
+	AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+		      io_task->bhs_pa.u.a32.address_lo);
+
+	if (num_sg == 1) {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb,
+			      1);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb,
+			      0);
+	} else if (num_sg == 2) {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb,
+			      0);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb,
+			      1);
+	} else {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge0_last, pwrb,
+			      0);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sge1_last, pwrb,
+			      0);
+	}
+
+	sg = l_sg;
+	psgl++;
+	psgl++;
+	offset = 0;
+	for (index = 0; index < num_sg; index++, sg = sg_next(sg), psgl++) {
+		sg_len = sg_dma_len(sg);
+		addr = (u64) sg_dma_address(sg);
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+			      lower_32_bits(addr));
+		AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+			      upper_32_bits(addr));
+		AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, sg_len);
+		AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, offset);
+		AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0);
+		offset += sg_len;
+	}
+	psgl--;
+	AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
+}
+
+static void
 hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg,
 	      unsigned int num_sg, struct beiscsi_io_task *io_task)
 {
@@ -2202,13 +2392,18 @@ hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg,
 	AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
 }
 
+/**
+ * hwi_write_buffer()- Populate the WRB with task info
+ * @pwrb: ptr to the WRB entry
+ * @task: iscsi task which is to be executed
+ **/
 static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task)
 {
 	struct iscsi_sge *psgl;
-	unsigned long long addr;
 	struct beiscsi_io_task *io_task = task->dd_data;
 	struct beiscsi_conn *beiscsi_conn = io_task->conn;
 	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	uint8_t dsp_value = 0;
 
 	io_task->bhs_len = sizeof(struct be_nonio_bhs) - 2;
 	AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb,
@@ -2217,26 +2412,38 @@ static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task)
 				io_task->bhs_pa.u.a32.address_hi);
 
 	if (task->data) {
-		if (task->data_count) {
-			AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
-			addr = (u64) pci_map_single(phba->pcidev,
-						    task->data,
-						    task->data_count, 1);
-		} else {
-			AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
-			addr = 0;
-		}
+
+		/* Check for the data_count */
+		dsp_value = (task->data_count) ? 1 : 0;
+
+		if (chip_skh_r(phba->pcidev))
+			AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp,
+				      pwrb, dsp_value);
+		else
+			AMAP_SET_BITS(struct amap_iscsi_wrb, dsp,
+				      pwrb, dsp_value);
+
+		/* Map addr only if there is data_count */
+		if (dsp_value) {
+			io_task->mtask_addr = pci_map_single(phba->pcidev,
+							     task->data,
+							     task->data_count,
+							     PCI_DMA_TODEVICE);
+			io_task->mtask_data_count = task->data_count;
+		} else
+			io_task->mtask_addr = 0;
+
 		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb,
-						((u32)(addr & 0xFFFFFFFF)));
+			      lower_32_bits(io_task->mtask_addr));
 		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb,
-						((u32)(addr >> 32)));
+			      upper_32_bits(io_task->mtask_addr));
 		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
 						task->data_count);
 
 		AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb, 1);
 	} else {
 		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
-		addr = 0;
+		io_task->mtask_addr = 0;
 	}
 
 	psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
@@ -2259,9 +2466,9 @@ static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task)
 		psgl++;
 		if (task->data) {
 			AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
-						((u32)(addr & 0xFFFFFFFF)));
+				      lower_32_bits(io_task->mtask_addr));
 			AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
-						((u32)(addr >> 32)));
+				      upper_32_bits(io_task->mtask_addr));
 		}
 		AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0x106);
 	}
@@ -2843,7 +3050,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 	}
 	return 0;
 create_eq_error:
-	for (i = 0; i < (phba->num_cpus + 1); i++) {
+	for (i = 0; i < (phba->num_cpus + eq_for_mcc); i++) {
 		eq = &phwi_context->be_eq[i].q;
 		mem = &eq->dma_mem;
 		if (mem->va)
@@ -3268,15 +3475,31 @@ err:
 	return -ENOMEM;
 }
 
-static int find_num_cpus(void)
+/**
+ * find_num_cpus()- Get the CPU online count
+ * @phba: ptr to priv structure
+ *
+ * CPU count is used for creating EQ.
+ **/
+static void find_num_cpus(struct beiscsi_hba *phba)
 {
 	int  num_cpus = 0;
 
 	num_cpus = num_online_cpus();
-	if (num_cpus >= MAX_CPUS)
-		num_cpus = MAX_CPUS - 1;
 
-	return num_cpus;
+	switch (phba->generation) {
+	case BE_GEN2:
+	case BE_GEN3:
+		phba->num_cpus = (num_cpus > BEISCSI_MAX_NUM_CPUS) ?
+				  BEISCSI_MAX_NUM_CPUS : num_cpus;
+		break;
+	case BE_GEN4:
+		phba->num_cpus = (num_cpus > OC_SKH_MAX_NUM_CPUS) ?
+				  OC_SKH_MAX_NUM_CPUS : num_cpus;
+		break;
+	default:
+		phba->num_cpus = 1;
+	}
 }
 
 static int hwi_init_port(struct beiscsi_hba *phba)
@@ -3644,12 +3867,9 @@ static void hwi_disable_intr(struct beiscsi_hba *phba)
 static int beiscsi_get_boot_info(struct beiscsi_hba *phba)
 {
 	struct be_cmd_get_session_resp *session_resp;
-	struct be_mcc_wrb *wrb;
 	struct be_dma_mem nonemb_cmd;
-	unsigned int tag, wrb_num;
-	unsigned short status, extd_status;
+	unsigned int tag;
 	unsigned int s_handle;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
 	int ret = -ENOMEM;
 
 	/* Get the session handle of the boot target */
@@ -3682,25 +3902,16 @@ static int beiscsi_get_boot_info(struct beiscsi_hba *phba)
 			    " Failed\n");
 
 		goto boot_freemem;
-	} else
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
+	}
 
-	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-	if (status || extd_status) {
+	ret = beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd.va);
+	if (ret) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
-			    "BM_%d : beiscsi_get_session_info Failed"
-			    " status = %d extd_status = %d\n",
-			    status, extd_status);
-
-		free_mcc_tag(&phba->ctrl, tag);
+			    "BM_%d : beiscsi_get_session_info Failed");
 		goto boot_freemem;
 	}
-	wrb = queue_get_wrb(mccq, wrb_num);
-	free_mcc_tag(&phba->ctrl, tag);
+
 	session_resp = nonemb_cmd.va ;
 
 	memcpy(&phba->boot_sess, &session_resp->session_info,
@@ -3853,6 +4064,11 @@ static void beiscsi_clean_port(struct beiscsi_hba *phba)
 	kfree(phba->ep_array);
 }
 
+/**
+ * beiscsi_cleanup_task()- Free driver resources of the task
+ * @task: ptr to the iscsi task
+ *
+ **/
 static void beiscsi_cleanup_task(struct iscsi_task *task)
 {
 	struct beiscsi_io_task *io_task = task->dd_data;
@@ -3900,6 +4116,13 @@ static void beiscsi_cleanup_task(struct iscsi_task *task)
 				spin_unlock(&phba->mgmt_sgl_lock);
 				io_task->psgl_handle = NULL;
 			}
+			if (io_task->mtask_addr) {
+				pci_unmap_single(phba->pcidev,
+						 io_task->mtask_addr,
+						 io_task->mtask_data_count,
+						 PCI_DMA_TODEVICE);
+				io_task->mtask_addr = 0;
+			}
 		}
 	}
 }
@@ -3909,8 +4132,6 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
 			   struct beiscsi_offload_params *params)
 {
 	struct wrb_handle *pwrb_handle;
-	struct iscsi_target_context_update_wrb *pwrb = NULL;
-	struct be_mem_descriptor *mem_descr;
 	struct beiscsi_hba *phba = beiscsi_conn->phba;
 	struct iscsi_task *task = beiscsi_conn->task;
 	struct iscsi_session *session = task->conn->session;
@@ -3927,67 +4148,16 @@ beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
 
 	pwrb_handle = alloc_wrb_handle(phba, (beiscsi_conn->beiscsi_conn_cid -
 				       phba->fw_config.iscsi_cid_start));
-	pwrb = (struct iscsi_target_context_update_wrb *)pwrb_handle->pwrb;
-	memset(pwrb, 0, sizeof(*pwrb));
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-		      max_burst_length, pwrb, params->dw[offsetof
-		      (struct amap_beiscsi_offload_params,
-		      max_burst_length) / 32]);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-		      max_send_data_segment_length, pwrb,
-		      params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      max_send_data_segment_length) / 32]);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-		      first_burst_length,
-		      pwrb,
-		      params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      first_burst_length) / 32]);
-
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      erl) / 32] & OFFLD_PARAMS_ERL));
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      dde) / 32] & OFFLD_PARAMS_DDE) >> 2);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      hde) / 32] & OFFLD_PARAMS_HDE) >> 3);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		       imd) / 32] & OFFLD_PARAMS_IMD) >> 5);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn,
-		      pwrb,
-		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
-		      exp_statsn) / 32] + 1));
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb,
-		      0x7);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx,
-		      pwrb, pwrb_handle->wrb_index);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
-		      pwrb, pwrb_handle->nxt_wrb_index);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-			session_state, pwrb, 0);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
-		      pwrb, 1);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq,
-		      pwrb, 0);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb,
-		      0);
 
-	mem_descr = phba->init_mem;
-	mem_descr += ISCSI_MEM_GLOBAL_HEADER;
-
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-			pad_buffer_addr_hi, pwrb,
-		      mem_descr->mem_array[0].bus_address.u.a32.address_hi);
-	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
-			pad_buffer_addr_lo, pwrb,
-		      mem_descr->mem_array[0].bus_address.u.a32.address_lo);
+	/* Check for the adapter family */
+	if (chip_skh_r(phba->pcidev))
+		beiscsi_offload_cxn_v2(params, pwrb_handle);
+	else
+		beiscsi_offload_cxn_v0(params, pwrb_handle,
+				       phba->init_mem);
 
-	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb));
+	be_dws_le_to_cpu(pwrb_handle->pwrb,
+			 sizeof(struct iscsi_target_context_update_wrb));
 
 	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
 	doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK)
@@ -4044,13 +4214,25 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 		spin_lock(&phba->io_sgl_lock);
 		io_task->psgl_handle = alloc_io_sgl_handle(phba);
 		spin_unlock(&phba->io_sgl_lock);
-		if (!io_task->psgl_handle)
+		if (!io_task->psgl_handle) {
+			beiscsi_log(phba, KERN_ERR,
+				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
+				    "BM_%d : Alloc of IO_SGL_ICD Failed"
+				    "for the CID : %d\n",
+				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_hndls;
+		}
 		io_task->pwrb_handle = alloc_wrb_handle(phba,
 					beiscsi_conn->beiscsi_conn_cid -
 					phba->fw_config.iscsi_cid_start);
-		if (!io_task->pwrb_handle)
+		if (!io_task->pwrb_handle) {
+			beiscsi_log(phba, KERN_ERR,
+				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
+				    "BM_%d : Alloc of WRB_HANDLE Failed"
+				    "for the CID : %d\n",
+				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_io_hndls;
+		}
 	} else {
 		io_task->scsi_cmnd = NULL;
 		if ((opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
@@ -4059,8 +4241,16 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 				io_task->psgl_handle = (struct sgl_handle *)
 						alloc_mgmt_sgl_handle(phba);
 				spin_unlock(&phba->mgmt_sgl_lock);
-				if (!io_task->psgl_handle)
+				if (!io_task->psgl_handle) {
+					beiscsi_log(phba, KERN_ERR,
+						    BEISCSI_LOG_IO |
+						    BEISCSI_LOG_CONFIG,
+						    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+						    "for the CID : %d\n",
+						    beiscsi_conn->
+						    beiscsi_conn_cid);
 					goto free_hndls;
+				}
 
 				beiscsi_conn->login_in_progress = 1;
 				beiscsi_conn->plogin_sgl_handle =
@@ -4069,8 +4259,16 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 					alloc_wrb_handle(phba,
 					beiscsi_conn->beiscsi_conn_cid -
 					phba->fw_config.iscsi_cid_start);
-				if (!io_task->pwrb_handle)
-					goto free_io_hndls;
+				if (!io_task->pwrb_handle) {
+					beiscsi_log(phba, KERN_ERR,
+						    BEISCSI_LOG_IO |
+						    BEISCSI_LOG_CONFIG,
+						    "BM_%d : Alloc of WRB_HANDLE Failed"
+						    "for the CID : %d\n",
+						    beiscsi_conn->
+						    beiscsi_conn_cid);
+					goto free_mgmt_hndls;
+				}
 				beiscsi_conn->plogin_wrb_handle =
 							io_task->pwrb_handle;
 
@@ -4085,14 +4283,28 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 			spin_lock(&phba->mgmt_sgl_lock);
 			io_task->psgl_handle = alloc_mgmt_sgl_handle(phba);
 			spin_unlock(&phba->mgmt_sgl_lock);
-			if (!io_task->psgl_handle)
+			if (!io_task->psgl_handle) {
+				beiscsi_log(phba, KERN_ERR,
+					    BEISCSI_LOG_IO |
+					    BEISCSI_LOG_CONFIG,
+					    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+					    "for the CID : %d\n",
+					    beiscsi_conn->
+					    beiscsi_conn_cid);
 				goto free_hndls;
+			}
 			io_task->pwrb_handle =
 					alloc_wrb_handle(phba,
 					beiscsi_conn->beiscsi_conn_cid -
 					phba->fw_config.iscsi_cid_start);
-			if (!io_task->pwrb_handle)
+			if (!io_task->pwrb_handle) {
+				beiscsi_log(phba, KERN_ERR,
+					    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
+					    "BM_%d : Alloc of WRB_HANDLE Failed"
+					    "for the CID : %d\n",
+					    beiscsi_conn->beiscsi_conn_cid);
 				goto free_mgmt_hndls;
+			}
 
 		}
 	}
@@ -4124,11 +4336,64 @@ free_hndls:
 	pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
 		      io_task->bhs_pa.u.a64.address);
 	io_task->cmd_bhs = NULL;
-	beiscsi_log(phba, KERN_ERR,
-		    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-		    "BM_%d : Alloc of SGL_ICD Failed\n");
 	return -ENOMEM;
 }
+int beiscsi_iotask_v2(struct iscsi_task *task, struct scatterlist *sg,
+		       unsigned int num_sg, unsigned int xferlen,
+		       unsigned int writedir)
+{
+
+	struct beiscsi_io_task *io_task = task->dd_data;
+	struct iscsi_conn *conn = task->conn;
+	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_hba *phba = beiscsi_conn->phba;
+	struct iscsi_wrb *pwrb = NULL;
+	unsigned int doorbell = 0;
+
+	pwrb = io_task->pwrb_handle->pwrb;
+	memset(pwrb, 0, sizeof(*pwrb));
+
+	io_task->cmd_bhs->iscsi_hdr.exp_statsn = 0;
+	io_task->bhs_len = sizeof(struct be_cmd_bhs);
+
+	if (writedir) {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, type, pwrb,
+			      INI_WR_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp, pwrb, 1);
+	} else {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, type, pwrb,
+			      INI_RD_CMD);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, dsp, pwrb, 0);
+	}
+
+	io_task->wrb_type = AMAP_GET_BITS(struct amap_iscsi_wrb_v2,
+					  type, pwrb);
+
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, lun, pwrb,
+		      cpu_to_be16(*(unsigned short *)
+		      &io_task->cmd_bhs->iscsi_hdr.lun));
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb, xferlen);
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, wrb_idx, pwrb,
+		      io_task->pwrb_handle->wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb,
+		      be32_to_cpu(task->cmdsn));
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sgl_idx, pwrb,
+		      io_task->psgl_handle->sgl_index);
+
+	hwi_write_sgl_v2(pwrb, sg, num_sg, io_task);
+	AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
+		      io_task->pwrb_handle->nxt_wrb_index);
+
+	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+
+	doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+	doorbell |= (io_task->pwrb_handle->wrb_index &
+		     DB_DEF_PDU_WRB_INDEX_MASK) <<
+		     DB_DEF_PDU_WRB_INDEX_SHIFT;
+	doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+	iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+	return 0;
+}
 
 static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
 			  unsigned int num_sg, unsigned int xferlen,
@@ -4156,6 +4421,9 @@ static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
 		AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
 	}
 
+	io_task->wrb_type = AMAP_GET_BITS(struct amap_iscsi_wrb,
+					  type, pwrb);
+
 	AMAP_SET_BITS(struct amap_iscsi_wrb, lun, pwrb,
 		      cpu_to_be16(*(unsigned short *)
 				  &io_task->cmd_bhs->iscsi_hdr.lun));
@@ -4191,55 +4459,75 @@ static int beiscsi_mtask(struct iscsi_task *task)
 	struct iscsi_wrb *pwrb = NULL;
 	unsigned int doorbell = 0;
 	unsigned int cid;
+	unsigned int pwrb_typeoffset = 0;
 
 	cid = beiscsi_conn->beiscsi_conn_cid;
 	pwrb = io_task->pwrb_handle->pwrb;
 	memset(pwrb, 0, sizeof(*pwrb));
-	AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
-		      be32_to_cpu(task->cmdsn));
-	AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
-		      io_task->pwrb_handle->wrb_index);
-	AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
-		      io_task->psgl_handle->sgl_index);
+
+	if (chip_skh_r(phba->pcidev)) {
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, cmdsn_itt, pwrb,
+			      be32_to_cpu(task->cmdsn));
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, wrb_idx, pwrb,
+			      io_task->pwrb_handle->wrb_index);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, sgl_idx, pwrb,
+			      io_task->psgl_handle->sgl_index);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, r2t_exp_dtl, pwrb,
+			      task->data_count);
+		AMAP_SET_BITS(struct amap_iscsi_wrb_v2, ptr2nextwrb, pwrb,
+			      io_task->pwrb_handle->nxt_wrb_index);
+		pwrb_typeoffset = SKH_WRB_TYPE_OFFSET;
+	} else {
+		AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
+			      be32_to_cpu(task->cmdsn));
+		AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
+			      io_task->pwrb_handle->wrb_index);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
+			      io_task->psgl_handle->sgl_index);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
+			      task->data_count);
+		AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
+			      io_task->pwrb_handle->nxt_wrb_index);
+		pwrb_typeoffset = BE_WRB_TYPE_OFFSET;
+	}
+
 
 	switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
 	case ISCSI_OP_LOGIN:
-		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-			      TGT_DM_CMD);
-		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
 		AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1);
+		ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset);
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_NOOP_OUT:
 		if (task->hdr->ttt != ISCSI_RESERVED_TAG) {
-			AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-				      TGT_DM_CMD);
-			AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt,
-				      pwrb, 0);
-			AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
+			ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset);
+			if (chip_skh_r(phba->pcidev))
+				AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+					      dmsg, pwrb, 1);
+			else
+				AMAP_SET_BITS(struct amap_iscsi_wrb,
+					      dmsg, pwrb, 1);
 		} else {
-			AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-				      INI_RD_CMD);
-			AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+			ADAPTER_SET_WRB_TYPE(pwrb, INI_RD_CMD, pwrb_typeoffset);
+			if (chip_skh_r(phba->pcidev))
+				AMAP_SET_BITS(struct amap_iscsi_wrb_v2,
+					      dmsg, pwrb, 0);
+			else
+				AMAP_SET_BITS(struct amap_iscsi_wrb,
+					      dmsg, pwrb, 0);
 		}
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_TEXT:
-		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-			      TGT_DM_CMD);
-		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+		ADAPTER_SET_WRB_TYPE(pwrb, TGT_DM_CMD, pwrb_typeoffset);
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_SCSI_TMFUNC:
-		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-			      INI_TMF_CMD);
-		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+		ADAPTER_SET_WRB_TYPE(pwrb, INI_TMF_CMD, pwrb_typeoffset);
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_LOGOUT:
-		AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
-		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-			      HWH_TYPE_LOGOUT);
+		ADAPTER_SET_WRB_TYPE(pwrb, HWH_TYPE_LOGOUT, pwrb_typeoffset);
 		hwi_write_buffer(pwrb, task);
 		break;
 
@@ -4251,11 +4539,10 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		return -EINVAL;
 	}
 
-	AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
-		      task->data_count);
-	AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
-		      io_task->pwrb_handle->nxt_wrb_index);
-	be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+	/* Set the task type */
+	io_task->wrb_type = (chip_skh_r(phba->pcidev)) ?
+		AMAP_GET_BITS(struct amap_iscsi_wrb_v2, type, pwrb) :
+		AMAP_GET_BITS(struct amap_iscsi_wrb, type, pwrb);
 
 	doorbell |= cid & DB_WRB_POST_CID_MASK;
 	doorbell |= (io_task->pwrb_handle->wrb_index &
@@ -4269,10 +4556,13 @@ static int beiscsi_task_xmit(struct iscsi_task *task)
 {
 	struct beiscsi_io_task *io_task = task->dd_data;
 	struct scsi_cmnd *sc = task->sc;
+	struct beiscsi_hba *phba = NULL;
 	struct scatterlist *sg;
 	int num_sg;
 	unsigned int  writedir = 0, xferlen = 0;
 
+	phba = ((struct beiscsi_conn *)task->conn->dd_data)->phba;
+
 	if (!sc)
 		return beiscsi_mtask(task);
 
@@ -4295,7 +4585,7 @@ static int beiscsi_task_xmit(struct iscsi_task *task)
 	 else
 		writedir = 0;
 
-	return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
+	 return phba->iotask_fn(task, sg, num_sg, xferlen, writedir);
 }
 
 /**
@@ -4326,20 +4616,24 @@ static int beiscsi_bsg_request(struct bsg_job *job)
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
 				    "BM_%d : Failed to allocate memory for "
 				    "beiscsi_bsg_request\n");
-			return -EIO;
+			return -ENOMEM;
 		}
 		tag = mgmt_vendor_specific_fw_cmd(&phba->ctrl, phba, job,
 						  &nonemb_cmd);
 		if (!tag) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-				    "BM_%d : be_cmd_get_mac_addr Failed\n");
+				    "BM_%d : MBX Tag Allocation Failed\n");
 
 			pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
 					    nonemb_cmd.va, nonemb_cmd.dma);
 			return -EAGAIN;
-		} else
-			wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-						 phba->ctrl.mcc_numtag[tag]);
+		}
+
+		rc = wait_event_interruptible_timeout(
+					phba->ctrl.mcc_wait[tag],
+					phba->ctrl.mcc_numtag[tag],
+					msecs_to_jiffies(
+					BEISCSI_HOST_MBX_TIMEOUT));
 		extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
 		status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
 		free_mcc_tag(&phba->ctrl, tag);
@@ -4356,11 +4650,13 @@ static int beiscsi_bsg_request(struct bsg_job *job)
 				    nonemb_cmd.va, nonemb_cmd.dma);
 		if (status || extd_status) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-				    "BM_%d : be_cmd_get_mac_addr Failed"
+				    "BM_%d : MBX Cmd Failed"
 				    " status = %d extd_status = %d\n",
 				    status, extd_status);
 
 			return -EIO;
+		} else {
+			rc = 0;
 		}
 		break;
 
@@ -4380,14 +4676,18 @@ void beiscsi_hba_attrs_init(struct beiscsi_hba *phba)
 	beiscsi_log_enable_init(phba, beiscsi_log_enable);
 }
 
+/*
+ * beiscsi_quiesce()- Cleanup Driver resources
+ * @phba: Instance Priv structure
+ *
+ * Free the OS and HW resources held by the driver
+ **/
 static void beiscsi_quiesce(struct beiscsi_hba *phba)
 {
 	struct hwi_controller *phwi_ctrlr;
 	struct hwi_context_memory *phwi_context;
 	struct be_eq_obj *pbe_eq;
 	unsigned int i, msix_vec;
-	u8 *real_offset = 0;
-	u32 value = 0;
 
 	phwi_ctrlr = phba->phwi_ctrlr;
 	phwi_context = phwi_ctrlr->phwi_ctxt;
@@ -4411,19 +4711,14 @@ static void beiscsi_quiesce(struct beiscsi_hba *phba)
 
 	beiscsi_clean_port(phba);
 	beiscsi_free_mem(phba);
-	real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE;
 
-	value = readl((void *)real_offset);
-
-	if (value & 0x00010000) {
-		value &= 0xfffeffff;
-		writel(value, (void *)real_offset);
-	}
 	beiscsi_unmap_pci_function(phba);
 	pci_free_consistent(phba->pcidev,
 			    phba->ctrl.mbox_mem_alloced.size,
 			    phba->ctrl.mbox_mem_alloced.va,
 			    phba->ctrl.mbox_mem_alloced.dma);
+
+	cancel_delayed_work_sync(&phba->beiscsi_hw_check_task);
 }
 
 static void beiscsi_remove(struct pci_dev *pcidev)
@@ -4476,6 +4771,25 @@ static void beiscsi_msix_enable(struct beiscsi_hba *phba)
 	return;
 }
 
+/*
+ * beiscsi_hw_health_check()- Check adapter health
+ * @work: work item to check HW health
+ *
+ * Check if adapter in an unrecoverable state or not.
+ **/
+static void
+beiscsi_hw_health_check(struct work_struct *work)
+{
+	struct beiscsi_hba *phba =
+		container_of(work, struct beiscsi_hba,
+			     beiscsi_hw_check_task.work);
+
+	beiscsi_ue_detect(phba);
+
+	schedule_delayed_work(&phba->beiscsi_hw_check_task,
+			      msecs_to_jiffies(1000));
+}
+
 static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 				const struct pci_device_id *id)
 {
@@ -4483,9 +4797,7 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 	struct hwi_controller *phwi_ctrlr;
 	struct hwi_context_memory *phwi_context;
 	struct be_eq_obj *pbe_eq;
-	int ret, num_cpus, i;
-	u8 *real_offset = 0;
-	u32 value = 0;
+	int ret, i;
 
 	ret = beiscsi_enable_pci(pcidev);
 	if (ret < 0) {
@@ -4504,25 +4816,33 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 	/* Initialize Driver configuration Paramters */
 	beiscsi_hba_attrs_init(phba);
 
+	phba->fw_timeout = false;
+
+
 	switch (pcidev->device) {
 	case BE_DEVICE_ID1:
 	case OC_DEVICE_ID1:
 	case OC_DEVICE_ID2:
 		phba->generation = BE_GEN2;
+		phba->iotask_fn = beiscsi_iotask;
 		break;
 	case BE_DEVICE_ID2:
 	case OC_DEVICE_ID3:
 		phba->generation = BE_GEN3;
+		phba->iotask_fn = beiscsi_iotask;
 		break;
+	case OC_SKH_ID1:
+		phba->generation = BE_GEN4;
+		phba->iotask_fn = beiscsi_iotask_v2;
 	default:
 		phba->generation = 0;
 	}
 
 	if (enable_msix)
-		num_cpus = find_num_cpus();
+		find_num_cpus(phba);
 	else
-		num_cpus = 1;
-	phba->num_cpus = num_cpus;
+		phba->num_cpus = 1;
+
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
 		    "BM_%d : num_cpus = %d\n",
 		    phba->num_cpus);
@@ -4540,31 +4860,18 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 		goto hba_free;
 	}
 
-	if (!num_hba) {
-		real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE;
-		value = readl((void *)real_offset);
-		if (value & 0x00010000) {
-			gcrashmode++;
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : Loading Driver in crashdump mode\n");
-			ret = beiscsi_cmd_reset_function(phba);
-			if (ret) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Reset Failed. Aborting Crashdump\n");
-				goto hba_free;
-			}
-			ret = be_chk_reset_complete(phba);
-			if (ret) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Failed to get out of reset."
-					    "Aborting Crashdump\n");
-				goto hba_free;
-			}
-		} else {
-			value |= 0x00010000;
-			writel(value, (void *)real_offset);
-			num_hba++;
-		}
+	ret = beiscsi_cmd_reset_function(phba);
+	if (ret) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BM_%d : Reset Failed. Aborting Crashdump\n");
+		goto hba_free;
+	}
+	ret = be_chk_reset_complete(phba);
+	if (ret) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BM_%d : Failed to get out of reset."
+			    "Aborting Crashdump\n");
+		goto hba_free;
 	}
 
 	spin_lock_init(&phba->io_sgl_lock);
@@ -4596,7 +4903,7 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 
 	phba->ctrl.mcc_alloc_index = phba->ctrl.mcc_free_index = 0;
 
-	snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u",
+	snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_%02x_wq",
 		 phba->shost->host_no);
 	phba->wq = alloc_workqueue(phba->wq_name, WQ_MEM_RECLAIM, 1);
 	if (!phba->wq) {
@@ -4606,10 +4913,12 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 		goto free_twq;
 	}
 
-	INIT_WORK(&phba->work_cqs, beiscsi_process_all_cqs);
+	INIT_DELAYED_WORK(&phba->beiscsi_hw_check_task,
+			  beiscsi_hw_health_check);
 
 	phwi_ctrlr = phba->phwi_ctrlr;
 	phwi_context = phwi_ctrlr->phwi_ctxt;
+
 	if (blk_iopoll_enabled) {
 		for (i = 0; i < phba->num_cpus; i++) {
 			pbe_eq = &phwi_context->be_eq[i];
@@ -4617,7 +4926,25 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 					be_iopoll);
 			blk_iopoll_enable(&pbe_eq->iopoll);
 		}
+
+		i = (phba->msix_enabled) ? i : 0;
+		/* Work item for MCC handling */
+		pbe_eq = &phwi_context->be_eq[i];
+		INIT_WORK(&pbe_eq->work_cqs, beiscsi_process_all_cqs);
+	} else {
+		if (phba->msix_enabled) {
+			for (i = 0; i <= phba->num_cpus; i++) {
+				pbe_eq = &phwi_context->be_eq[i];
+				INIT_WORK(&pbe_eq->work_cqs,
+					  beiscsi_process_all_cqs);
+			}
+		} else {
+				pbe_eq = &phwi_context->be_eq[0];
+				INIT_WORK(&pbe_eq->work_cqs,
+					  beiscsi_process_all_cqs);
+			}
 	}
+
 	ret = beiscsi_init_irqs(phba);
 	if (ret < 0) {
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
@@ -4637,6 +4964,9 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 			    "iSCSI boot info.\n");
 
 	beiscsi_create_def_ifaces(phba);
+	schedule_delayed_work(&phba->beiscsi_hw_check_task,
+			      msecs_to_jiffies(1000));
+
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
 		    "\n\n\n BM_%d : SUCCESS - DRIVER LOADED\n\n\n");
 	return 0;
@@ -4652,15 +4982,6 @@ free_twq:
 	beiscsi_clean_port(phba);
 	beiscsi_free_mem(phba);
 free_port:
-	real_offset = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE;
-
-	value = readl((void *)real_offset);
-
-	if (value & 0x00010000) {
-		value &= 0xfffeffff;
-		writel(value, (void *)real_offset);
-	}
-
 	pci_free_consistent(phba->pcidev,
 			    phba->ctrl.mbox_mem_alloced.size,
 			    phba->ctrl.mbox_mem_alloced.va,
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index b891226..5946577 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -36,12 +36,13 @@
 
 #include "be.h"
 #define DRV_NAME		"be2iscsi"
-#define BUILD_STR		"4.4.58.0"
+#define BUILD_STR		"10.0.272.0"
 #define BE_NAME			"Emulex OneConnect" \
 				"Open-iSCSI Driver version" BUILD_STR
 #define DRV_DESC		BE_NAME " " "Driver"
 
 #define BE_VENDOR_ID		0x19A2
+#define ELX_VENDOR_ID		0x10DF
 /* DEVICE ID's for BE2 */
 #define BE_DEVICE_ID1		0x212
 #define OC_DEVICE_ID1		0x702
@@ -51,6 +52,9 @@
 #define BE_DEVICE_ID2		0x222
 #define OC_DEVICE_ID3		0x712
 
+/* DEVICE ID for SKH */
+#define OC_SKH_ID1		0x722
+
 #define BE2_IO_DEPTH		1024
 #define BE2_MAX_SESSIONS	256
 #define BE2_CMDS_PER_CXN	128
@@ -60,7 +64,11 @@
 #define BE2_DEFPDU_HDR_SZ	64
 #define BE2_DEFPDU_DATA_SZ	8192
 
-#define MAX_CPUS		31
+#define MAX_CPUS		64
+#define BEISCSI_MAX_NUM_CPUS	7
+#define OC_SKH_MAX_NUM_CPUS	63
+
+
 #define BEISCSI_SGLIST_ELEMENTS	30
 
 #define BEISCSI_CMD_PER_LUN	128	/* scsi_host->cmd_per_lun */
@@ -257,6 +265,7 @@ struct invalidate_command_table {
 	unsigned short cid;
 } __packed;
 
+#define chip_skh_r(pdev)	(pdev->device == OC_SKH_ID1)
 struct beiscsi_hba {
 	struct hba_parameters params;
 	struct hwi_controller *phwi_ctrlr;
@@ -270,12 +279,11 @@ struct beiscsi_hba {
 	struct be_bus_address pci_pa;	/* CSR */
 	/* PCI representation of our HBA */
 	struct pci_dev *pcidev;
-	unsigned int state;
 	unsigned short asic_revision;
 	unsigned int num_cpus;
 	unsigned int nxt_cqid;
-	struct msix_entry msix_entries[MAX_CPUS + 1];
-	char *msi_name[MAX_CPUS + 1];
+	struct msix_entry msix_entries[MAX_CPUS];
+	char *msi_name[MAX_CPUS];
 	bool msix_enabled;
 	struct be_mem_descriptor *init_mem;
 
@@ -325,12 +333,14 @@ struct beiscsi_hba {
 		spinlock_t cid_lock;
 	} fw_config;
 
+	unsigned int state;
+	bool fw_timeout;
+	bool ue_detected;
+	struct delayed_work beiscsi_hw_check_task;
+
 	u8 mac_address[ETH_ALEN];
-	unsigned short todo_cq;
-	unsigned short todo_mcc_cq;
 	char wq_name[20];
 	struct workqueue_struct *wq;	/* The actuak work queue */
-	struct work_struct work_cqs;	/* The work being queued */
 	struct be_ctrl_info ctrl;
 	unsigned int generation;
 	unsigned int interface_handle;
@@ -338,7 +348,10 @@ struct beiscsi_hba {
 	struct invalidate_command_table inv_tbl[128];
 
 	unsigned int attr_log_enable;
-
+	int (*iotask_fn)(struct iscsi_task *,
+			struct scatterlist *sg,
+			uint32_t num_sg, uint32_t xferlen,
+			uint32_t writedir);
 };
 
 struct beiscsi_session {
@@ -410,6 +423,9 @@ struct beiscsi_io_task {
 	struct be_cmd_bhs *cmd_bhs;
 	struct be_bus_address bhs_pa;
 	unsigned short bhs_len;
+	dma_addr_t mtask_addr;
+	uint32_t mtask_data_count;
+	uint8_t wrb_type;
 };
 
 struct be_nonio_bhs {
@@ -457,6 +473,9 @@ struct beiscsi_offload_params {
 #define OFFLD_PARAMS_HDE	0x00000008
 #define OFFLD_PARAMS_IR2T	0x00000010
 #define OFFLD_PARAMS_IMD	0x00000020
+#define OFFLD_PARAMS_DATA_SEQ_INORDER   0x00000040
+#define OFFLD_PARAMS_PDU_SEQ_INORDER    0x00000080
+#define OFFLD_PARAMS_MAX_R2T 0x00FFFF00
 
 /**
  * Pseudo amap definition in which each bit of the actual structure is defined
@@ -471,7 +490,10 @@ struct amap_beiscsi_offload_params {
 	u8 hde[1];
 	u8 ir2t[1];
 	u8 imd[1];
-	u8 pad[26];
+	u8 data_seq_inorder[1];
+	u8 pdu_seq_inorder[1];
+	u8 max_r2t[16];
+	u8 pad[8];
 	u8 exp_statsn[32];
 };
 
@@ -569,6 +591,20 @@ struct amap_i_t_dpdu_cqe {
 	u8 valid;
 } __packed;
 
+struct amap_i_t_dpdu_cqe_v2 {
+	u8 db_addr_hi[32];  /* DWORD 0 */
+	u8 db_addr_lo[32];  /* DWORD 1 */
+	u8 code[6]; /* DWORD 2 */
+	u8 num_cons; /* DWORD 2*/
+	u8 rsvd0[8]; /* DWORD 2 */
+	u8 dpl[17]; /* DWORD 2 */
+	u8 index[16]; /* DWORD 3 */
+	u8 cid[13]; /* DWORD 3 */
+	u8 rsvd1; /* DWORD 3 */
+	u8 final; /* DWORD 3 */
+	u8 valid; /* DWORD 3 */
+} __packed;
+
 #define CQE_VALID_MASK	0x80000000
 #define CQE_CODE_MASK	0x0000003F
 #define CQE_CID_MASK	0x0000FFC0
@@ -617,6 +653,11 @@ struct iscsi_wrb {
 } __packed;
 
 #define WRB_TYPE_MASK 0xF0000000
+#define SKH_WRB_TYPE_OFFSET 27
+#define BE_WRB_TYPE_OFFSET  28
+
+#define ADAPTER_SET_WRB_TYPE(pwrb, wrb_type, type_offset) \
+		(pwrb->dw[0] |= (wrb_type << type_offset))
 
 /**
  * Pseudo amap definition in which each bit of the actual structure is defined
@@ -663,12 +704,57 @@ struct amap_iscsi_wrb {
 
 } __packed;
 
+struct amap_iscsi_wrb_v2 {
+	u8 r2t_exp_dtl[25]; /* DWORD 0 */
+	u8 rsvd0[2];    /* DWORD 0*/
+	u8 type[5];     /* DWORD 0 */
+	u8 ptr2nextwrb[8];  /* DWORD 1 */
+	u8 wrb_idx[8];      /* DWORD 1 */
+	u8 lun[16];     /* DWORD 1 */
+	u8 sgl_idx[16]; /* DWORD 2 */
+	u8 ref_sgl_icd_idx[16]; /* DWORD 2 */
+	u8 exp_data_sn[32]; /* DWORD 3 */
+	u8 iscsi_bhs_addr_hi[32];   /* DWORD 4 */
+	u8 iscsi_bhs_addr_lo[32];   /* DWORD 5 */
+	u8 cq_id[16];   /* DWORD 6 */
+	u8 rsvd1[16];   /* DWORD 6 */
+	u8 cmdsn_itt[32];   /* DWORD 7 */
+	u8 sge0_addr_hi[32];    /* DWORD 8 */
+	u8 sge0_addr_lo[32];    /* DWORD 9 */
+	u8 sge0_offset[24]; /* DWORD 10 */
+	u8 rsvd2[7];    /* DWORD 10 */
+	u8 sge0_last;   /* DWORD 10 */
+	u8 sge0_len[17];    /* DWORD 11 */
+	u8 rsvd3[7];    /* DWORD 11 */
+	u8 diff_enbl;   /* DWORD 11 */
+	u8 u_run;       /* DWORD 11 */
+	u8 o_run;       /* DWORD 11 */
+	u8 invalid;     /* DWORD 11 */
+	u8 dsp;         /* DWORD 11 */
+	u8 dmsg;        /* DWORD 11 */
+	u8 rsvd4;       /* DWORD 11 */
+	u8 lt;          /* DWORD 11 */
+	u8 sge1_addr_hi[32];    /* DWORD 12 */
+	u8 sge1_addr_lo[32];    /* DWORD 13 */
+	u8 sge1_r2t_offset[24]; /* DWORD 14 */
+	u8 rsvd5[7];    /* DWORD 14 */
+	u8 sge1_last;   /* DWORD 14 */
+	u8 sge1_len[17];    /* DWORD 15 */
+	u8 rsvd6[15];   /* DWORD 15 */
+} __packed;
+
+
 struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid);
 void
 free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
 
 void beiscsi_process_all_cqs(struct work_struct *work);
 
+static inline bool beiscsi_error(struct beiscsi_hba *phba)
+{
+	return phba->ue_detected || phba->fw_timeout;
+}
+
 struct pdu_nop_out {
 	u32 dw[12];
 };
@@ -728,6 +814,7 @@ struct iscsi_target_context_update_wrb {
  * Pseudo amap definition in which each bit of the actual structure is defined
  * as a byte: used to calculate offset/shift/mask of each field
  */
+#define BE_TGT_CTX_UPDT_CMD 0x07
 struct amap_iscsi_target_context_update_wrb {
 	u8 lun[14];		/* DWORD 0 */
 	u8 lt;			/* DWORD 0 */
@@ -773,6 +860,47 @@ struct amap_iscsi_target_context_update_wrb {
 
 } __packed;
 
+#define BEISCSI_MAX_RECV_DATASEG_LEN    (64 * 1024)
+#define BEISCSI_MAX_CXNS    1
+struct amap_iscsi_target_context_update_wrb_v2 {
+	u8 max_burst_length[24];    /* DWORD 0 */
+	u8 rsvd0[3];    /* DWORD 0 */
+	u8 type[5];     /* DWORD 0 */
+	u8 ptr2nextwrb[8];  /* DWORD 1 */
+	u8 wrb_idx[8];      /* DWORD 1 */
+	u8 rsvd1[16];       /* DWORD 1 */
+	u8 max_send_data_segment_length[24];    /* DWORD 2 */
+	u8 rsvd2[8];    /* DWORD 2 */
+	u8 first_burst_length[24]; /* DWORD 3 */
+	u8 rsvd3[8]; /* DOWRD 3 */
+	u8 max_r2t[16]; /* DWORD 4 */
+	u8 rsvd4[10];   /* DWORD 4 */
+	u8 hde;         /* DWORD 4 */
+	u8 dde;         /* DWORD 4 */
+	u8 erl[2];      /* DWORD 4 */
+	u8 imd;         /* DWORD 4 */
+	u8 ir2t;        /* DWORD 4 */
+	u8 stat_sn[32];     /* DWORD 5 */
+	u8 rsvd5[32];   /* DWORD 6 */
+	u8 rsvd6[32];   /* DWORD 7 */
+	u8 max_recv_dataseg_len[24];    /* DWORD 8 */
+	u8 rsvd7[8]; /* DWORD 8 */
+	u8 rsvd8[32];   /* DWORD 9 */
+	u8 rsvd9[32];   /* DWORD 10 */
+	u8 max_cxns[16]; /* DWORD 11 */
+	u8 rsvd10[11]; /* DWORD  11*/
+	u8 invld; /* DWORD 11 */
+	u8 rsvd11;/* DWORD 11*/
+	u8 dmsg; /* DWORD 11 */
+	u8 data_seq_inorder; /* DWORD 11 */
+	u8 pdu_seq_inorder; /* DWORD 11 */
+	u8 rsvd12[32]; /*DWORD 12 */
+	u8 rsvd13[32]; /* DWORD 13 */
+	u8 rsvd14[32]; /* DWORD 14 */
+	u8 rsvd15[32]; /* DWORD 15 */
+} __packed;
+
+
 struct be_ring {
 	u32 pages;		/* queue size in pages */
 	u32 id;			/* queue id assigned by beklib */
@@ -837,7 +965,7 @@ struct hwi_context_memory {
 	u16 max_eqd;		/* in usecs */
 	u16 cur_eqd;		/* in usecs */
 	struct be_eq_obj be_eq[MAX_CPUS];
-	struct be_queue_info be_cq[MAX_CPUS];
+	struct be_queue_info be_cq[MAX_CPUS - 1];
 
 	struct be_queue_info be_def_hdrq;
 	struct be_queue_info be_def_dataq;
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index aab5dd3..a6c2fe4 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -22,6 +22,138 @@
 #include <scsi/scsi_bsg_iscsi.h>
 #include "be_mgmt.h"
 #include "be_iscsi.h"
+#include "be_main.h"
+
+/* UE Status Low CSR */
+static const char * const desc_ue_status_low[] = {
+	"CEV",
+	"CTX",
+	"DBUF",
+	"ERX",
+	"Host",
+	"MPU",
+	"NDMA",
+	"PTC ",
+	"RDMA ",
+	"RXF ",
+	"RXIPS ",
+	"RXULP0 ",
+	"RXULP1 ",
+	"RXULP2 ",
+	"TIM ",
+	"TPOST ",
+	"TPRE ",
+	"TXIPS ",
+	"TXULP0 ",
+	"TXULP1 ",
+	"UC ",
+	"WDMA ",
+	"TXULP2 ",
+	"HOST1 ",
+	"P0_OB_LINK ",
+	"P1_OB_LINK ",
+	"HOST_GPIO ",
+	"MBOX ",
+	"AXGMAC0",
+	"AXGMAC1",
+	"JTAG",
+	"MPU_INTPEND"
+};
+
+/* UE Status High CSR */
+static const char * const desc_ue_status_hi[] = {
+	"LPCMEMHOST",
+	"MGMT_MAC",
+	"PCS0ONLINE",
+	"MPU_IRAM",
+	"PCS1ONLINE",
+	"PCTL0",
+	"PCTL1",
+	"PMEM",
+	"RR",
+	"TXPB",
+	"RXPP",
+	"XAUI",
+	"TXP",
+	"ARM",
+	"IPC",
+	"HOST2",
+	"HOST3",
+	"HOST4",
+	"HOST5",
+	"HOST6",
+	"HOST7",
+	"HOST8",
+	"HOST9",
+	"NETC",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown",
+	"Unknown"
+};
+
+/*
+ * beiscsi_ue_detec()- Detect Unrecoverable Error on adapter
+ * @phba: Driver priv structure
+ *
+ * Read registers linked to UE and check for the UE status
+ **/
+void beiscsi_ue_detect(struct beiscsi_hba *phba)
+{
+	uint32_t ue_hi = 0, ue_lo = 0;
+	uint32_t ue_mask_hi = 0, ue_mask_lo = 0;
+	uint8_t i = 0;
+
+	if (phba->ue_detected)
+		return;
+
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_LOW, &ue_lo);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_MASK_LOW,
+			      &ue_mask_lo);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_HIGH,
+			      &ue_hi);
+	pci_read_config_dword(phba->pcidev,
+			      PCICFG_UE_STATUS_MASK_HI,
+			      &ue_mask_hi);
+
+	ue_lo = (ue_lo & ~ue_mask_lo);
+	ue_hi = (ue_hi & ~ue_mask_hi);
+
+
+	if (ue_lo || ue_hi) {
+		phba->ue_detected = true;
+		beiscsi_log(phba, KERN_ERR,
+			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
+			    "BG_%d : Error detected on the adapter\n");
+	}
+
+	if (ue_lo) {
+		for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+			if (ue_lo & 1)
+				beiscsi_log(phba, KERN_ERR,
+					    BEISCSI_LOG_CONFIG,
+					    "BG_%d : UE_LOW %s bit set\n",
+					    desc_ue_status_low[i]);
+		}
+	}
+
+	if (ue_hi) {
+		for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+			if (ue_hi & 1)
+				beiscsi_log(phba, KERN_ERR,
+					    BEISCSI_LOG_CONFIG,
+					    "BG_%d : UE_HIGH %s bit set\n",
+					    desc_ue_status_hi[i]);
+		}
+	}
+}
 
 /**
  * mgmt_reopen_session()- Reopen a session based on reopen_type
@@ -575,13 +707,20 @@ unsigned int mgmt_get_all_if_id(struct beiscsi_hba *phba)
 	return status;
 }
 
+/*
+ * mgmt_exec_nonemb_cmd()- Execute Non Embedded MBX Cmd
+ * @phba: Driver priv structure
+ * @nonemb_cmd: Address of the MBX command issued
+ * @resp_buf: Buffer to copy the MBX cmd response
+ * @resp_buf_len: respone lenght to be copied
+ *
+ **/
 static int mgmt_exec_nonemb_cmd(struct beiscsi_hba *phba,
 				struct be_dma_mem *nonemb_cmd, void *resp_buf,
 				int resp_buf_len)
 {
 	struct be_ctrl_info *ctrl = &phba->ctrl;
 	struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
-	unsigned short status, extd_status;
 	struct be_sge *sge;
 	unsigned int tag;
 	int rc = 0;
@@ -599,31 +738,25 @@ static int mgmt_exec_nonemb_cmd(struct beiscsi_hba *phba,
 
 	be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1);
 	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
-	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->pa_lo = cpu_to_le32(lower_32_bits(nonemb_cmd->dma));
 	sge->len = cpu_to_le32(nonemb_cmd->size);
 
 	be_mcc_notify(phba);
 	spin_unlock(&ctrl->mbox_lock);
 
-	wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-				 phba->ctrl.mcc_numtag[tag]);
-
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-	if (status || extd_status) {
+	rc = beiscsi_mccq_compl(phba, tag, NULL, nonemb_cmd->va);
+	if (rc) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
-			    "BG_%d : mgmt_exec_nonemb_cmd Failed status = %d"
-			    "extd_status = %d\n", status, extd_status);
+			    "BG_%d : mgmt_exec_nonemb_cmd Failed status\n");
+
 		rc = -EIO;
-		goto free_tag;
+		goto free_cmd;
 	}
 
 	if (resp_buf)
 		memcpy(resp_buf, nonemb_cmd->va, resp_buf_len);
 
-free_tag:
-	free_mcc_tag(&phba->ctrl, tag);
 free_cmd:
 	pci_free_consistent(ctrl->pdev, nonemb_cmd->size,
 			    nonemb_cmd->va, nonemb_cmd->dma);
@@ -1009,10 +1142,9 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 {
 	struct be_cmd_get_boot_target_resp *boot_resp;
 	struct be_mcc_wrb *wrb;
-	unsigned int tag, wrb_num;
+	unsigned int tag;
 	uint8_t boot_retry = 3;
-	unsigned short status, extd_status;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+	int rc;
 
 	do {
 		/* Get the Boot Target Session Handle and Count*/
@@ -1022,24 +1154,16 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 				    BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT,
 				    "BG_%d : Getting Boot Target Info Failed\n");
 			return -EAGAIN;
-		} else
-			wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-						 phba->ctrl.mcc_numtag[tag]);
-
-		wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-		extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-		status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-		if (status || extd_status) {
+		}
+
+		rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+		if (rc) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
-				    "BG_%d : mgmt_get_boot_target Failed"
-				    " status = %d extd_status = %d\n",
-				    status, extd_status);
-			free_mcc_tag(&phba->ctrl, tag);
+				    "BG_%d : MBX CMD get_boot_target Failed\n");
 			return -EBUSY;
 		}
-		wrb = queue_get_wrb(mccq, wrb_num);
-		free_mcc_tag(&phba->ctrl, tag);
+
 		boot_resp = embedded_payload(wrb);
 
 		/* Check if the there are any Boot targets configured */
@@ -1064,24 +1188,15 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 				    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
 				    "BG_%d : mgmt_reopen_session Failed\n");
 			return -EAGAIN;
-		} else
-			wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-						 phba->ctrl.mcc_numtag[tag]);
-
-		wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-		extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-		status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-		if (status || extd_status) {
+		}
+
+		rc = beiscsi_mccq_compl(phba, tag, NULL, NULL);
+		if (rc) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
-				    "BG_%d : mgmt_reopen_session Failed"
-				    " status = %d extd_status = %d\n",
-				    status, extd_status);
-			free_mcc_tag(&phba->ctrl, tag);
-			return -EBUSY;
+				    "BG_%d : mgmt_reopen_session Failed");
+			return rc;
 		}
-		free_mcc_tag(&phba->ctrl, tag);
-
 	} while (--boot_retry);
 
 	/* Couldn't log into the boot target */
@@ -1106,8 +1221,9 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 int mgmt_set_vlan(struct beiscsi_hba *phba,
 		   uint16_t vlan_tag)
 {
-	unsigned int tag, wrb_num;
-	unsigned short status, extd_status;
+	int rc;
+	unsigned int tag;
+	struct be_mcc_wrb *wrb = NULL;
 
 	tag = be_cmd_set_vlan(phba, vlan_tag);
 	if (!tag) {
@@ -1115,24 +1231,208 @@ int mgmt_set_vlan(struct beiscsi_hba *phba,
 			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
 			    "BG_%d : VLAN Setting Failed\n");
 		return -EBUSY;
-	} else
-		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-					 phba->ctrl.mcc_numtag[tag]);
-
-	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+	}
 
-	if (status || extd_status) {
+	rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL);
+	if (rc) {
 		beiscsi_log(phba, KERN_ERR,
 			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
-			    "BS_%d : status : %d extd_status : %d\n",
-			    status, extd_status);
+			    "BS_%d : VLAN MBX Cmd Failed\n");
+		return rc;
+	}
+	return rc;
+}
 
-		free_mcc_tag(&phba->ctrl, tag);
-		return -EAGAIN;
+/**
+ * beiscsi_drvr_ver_disp()- Display the driver Name and Version
+ * @dev: ptr to device not used.
+ * @attr: device attribute, not used.
+ * @buf: contains formatted text driver name and version
+ *
+ * return
+ * size of the formatted string
+ **/
+ssize_t
+beiscsi_drvr_ver_disp(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, BE_NAME "\n");
+}
+
+/**
+ * beiscsi_adap_family_disp()- Display adapter family.
+ * @dev: ptr to device to get priv structure
+ * @attr: device attribute, not used.
+ * @buf: contains formatted text driver name and version
+ *
+ * return
+ * size of the formatted string
+ **/
+ssize_t
+beiscsi_adap_family_disp(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	uint16_t dev_id = 0;
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct beiscsi_hba *phba = iscsi_host_priv(shost);
+
+	dev_id = phba->pcidev->device;
+	switch (dev_id) {
+	case BE_DEVICE_ID1:
+	case OC_DEVICE_ID1:
+	case OC_DEVICE_ID2:
+		return snprintf(buf, PAGE_SIZE, "BE2 Adapter Family\n");
+		break;
+	case BE_DEVICE_ID2:
+	case OC_DEVICE_ID3:
+		return snprintf(buf, PAGE_SIZE, "BE3-R Adapter Family\n");
+		break;
+	case OC_SKH_ID1:
+		return snprintf(buf, PAGE_SIZE, "Skyhawk-R Adapter Family\n");
+		break;
+	default:
+		return snprintf(buf, PAGE_SIZE,
+				"Unkown Adapter Family: 0x%x\n", dev_id);
+		break;
 	}
+}
 
-	free_mcc_tag(&phba->ctrl, tag);
-	return 0;
+
+void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
+			     struct wrb_handle *pwrb_handle,
+			     struct be_mem_descriptor *mem_descr)
+{
+	struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
+
+	memset(pwrb, 0, sizeof(*pwrb));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      max_send_data_segment_length, pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      max_send_data_segment_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb,
+		      BE_TGT_CTX_UPDT_CMD);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      first_burst_length,
+		      pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      first_burst_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      erl) / 32] & OFFLD_PARAMS_ERL));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		       dde) / 32] & OFFLD_PARAMS_DDE) >> 2);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      hde) / 32] & OFFLD_PARAMS_HDE) >> 3);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      imd) / 32] & OFFLD_PARAMS_IMD) >> 5);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn,
+		      pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      exp_statsn) / 32] + 1));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx,
+		      pwrb, pwrb_handle->wrb_index);
+
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      max_burst_length, pwrb, params->dw[offsetof
+		      (struct amap_beiscsi_offload_params,
+		      max_burst_length) / 32]);
+
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
+		      pwrb, pwrb_handle->nxt_wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      session_state, pwrb, 0);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
+		      pwrb, 1);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq,
+		      pwrb, 0);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb,
+		      0);
+
+	mem_descr += ISCSI_MEM_GLOBAL_HEADER;
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      pad_buffer_addr_hi, pwrb,
+		      mem_descr->mem_array[0].bus_address.u.a32.address_hi);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      pad_buffer_addr_lo, pwrb,
+		      mem_descr->mem_array[0].bus_address.u.a32.address_lo);
+}
+
+void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
+			     struct wrb_handle *pwrb_handle)
+{
+	struct iscsi_wrb *pwrb = pwrb_handle->pwrb;
+
+	memset(pwrb, 0, sizeof(*pwrb));
+
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+		      max_burst_length, pwrb, params->dw[offsetof
+		      (struct amap_beiscsi_offload_params,
+		      max_burst_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      max_burst_length, pwrb, params->dw[offsetof
+		      (struct amap_beiscsi_offload_params,
+		      max_burst_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      type, pwrb,
+		      BE_TGT_CTX_UPDT_CMD);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      ptr2nextwrb,
+		      pwrb, pwrb_handle->nxt_wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, wrb_idx,
+		      pwrb, pwrb_handle->wrb_index);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      max_send_data_segment_length, pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      max_send_data_segment_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      first_burst_length, pwrb,
+		      params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      first_burst_length) / 32]);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      max_recv_dataseg_len, pwrb, BEISCSI_MAX_RECV_DATASEG_LEN);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      max_cxns, pwrb, BEISCSI_MAX_CXNS);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, erl, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      erl) / 32] & OFFLD_PARAMS_ERL));
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, dde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      dde) / 32] & OFFLD_PARAMS_DDE) >> 2);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, hde, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      hde) / 32] & OFFLD_PARAMS_HDE) >> 3);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      ir2t, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, imd, pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      imd) / 32] & OFFLD_PARAMS_IMD) >> 5);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      data_seq_inorder,
+		      pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      data_seq_inorder) / 32] &
+		      OFFLD_PARAMS_DATA_SEQ_INORDER) >> 6);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2,
+		      pdu_seq_inorder,
+		      pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      pdu_seq_inorder) / 32] &
+		      OFFLD_PARAMS_PDU_SEQ_INORDER) >> 7);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, max_r2t,
+		      pwrb,
+		      (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      max_r2t) / 32] &
+		      OFFLD_PARAMS_MAX_R2T) >> 8);
+	AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb_v2, stat_sn,
+		      pwrb,
+		     (params->dw[offsetof(struct amap_beiscsi_offload_params,
+		      exp_statsn) / 32] + 1));
 }
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index c50cef6..2e4968a 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2011 Emulex
+ * Copyright (C) 2005 - 2012 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -30,6 +30,12 @@
 #define IP_V6_LEN	16
 #define IP_V4_LEN	4
 
+/* UE Status and Mask register */
+#define PCICFG_UE_STATUS_LOW            0xA0
+#define PCICFG_UE_STATUS_HIGH           0xA4
+#define PCICFG_UE_STATUS_MASK_LOW       0xA8
+#define PCICFG_UE_STATUS_MASK_HI        0xAC
+
 /**
  * Pseudo amap definition in which each bit of the actual structure is defined
  * as a byte: used to calculate offset/shift/mask of each field
@@ -301,4 +307,19 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 unsigned int mgmt_get_all_if_id(struct beiscsi_hba *phba);
 
 int mgmt_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag);
+
+ssize_t beiscsi_drvr_ver_disp(struct device *dev,
+			       struct device_attribute *attr, char *buf);
+
+ssize_t beiscsi_adap_family_disp(struct device *dev,
+				  struct device_attribute *attr, char *buf);
+
+void beiscsi_offload_cxn_v0(struct beiscsi_offload_params *params,
+			     struct wrb_handle *pwrb_handle,
+			     struct be_mem_descriptor *mem_descr);
+
+void beiscsi_offload_cxn_v2(struct beiscsi_offload_params *params,
+			     struct wrb_handle *pwrb_handle);
+void beiscsi_ue_detect(struct beiscsi_hba *phba);
+
 #endif
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 3f9e706..b44d04e 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -800,7 +800,7 @@ extern struct device_attribute *bnx2i_dev_attributes[];
 /*
  * Function Prototypes
  */
-extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev);
 
 extern void bnx2i_ulp_init(struct cnic_dev *dev);
 extern void bnx2i_ulp_exit(struct cnic_dev *dev);
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index b17637a..ee009e4ad 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -79,42 +79,33 @@ static struct notifier_block bnx2i_cpu_notifier = {
 /**
  * bnx2i_identify_device - identifies NetXtreme II device type
  * @hba: 		Adapter structure pointer
+ * @cnic:		Corresponding cnic device
  *
  * This function identifies the NX2 device type and sets appropriate
  *	queue mailbox register access method, 5709 requires driver to
  *	access MBOX regs using *bin* mode
  */
-void bnx2i_identify_device(struct bnx2i_hba *hba)
+void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev)
 {
 	hba->cnic_dev_type = 0;
-	if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
-	    (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
-		set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
-	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
-	    (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
-		set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
-	else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
-	    (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
-		set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
-		hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
-	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57711    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57711E   ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57712    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57712E   ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57800    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57800_MF ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57800_VF ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57810    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57810_MF ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57810_VF ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57840    ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57840_MF ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57840_VF)
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		if (hba->pci_did == PCI_DEVICE_ID_NX2_5706 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5706S) {
+			set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+		} else if (hba->pci_did == PCI_DEVICE_ID_NX2_5708 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5708S) {
+			set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+		} else if (hba->pci_did == PCI_DEVICE_ID_NX2_5709 ||
+		    hba->pci_did == PCI_DEVICE_ID_NX2_5709S) {
+			set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+			hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+		}
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
 		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
-	else
+	} else {
 		printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
 				  hba->pci_did);
+	}
 }
 
 
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 3b34c13..0056e47 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -808,7 +808,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
 	hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
 	hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
 
-	bnx2i_identify_device(hba);
+	bnx2i_identify_device(hba, cnic);
 	bnx2i_setup_host_queue_size(hba, shost);
 
 	hba->reg_base = pci_resource_start(hba->pcidev, 0);
diff --git a/drivers/scsi/csiostor/Kconfig b/drivers/scsi/csiostor/Kconfig
new file mode 100644
index 0000000..4d03b03
--- /dev/null
+++ b/drivers/scsi/csiostor/Kconfig
@@ -0,0 +1,19 @@
+config SCSI_CHELSIO_FCOE
+	tristate "Chelsio Communications FCoE support"
+	depends on PCI && SCSI
+	select SCSI_FC_ATTRS
+	select FW_LOADER
+	help
+	  This driver supports FCoE Offload functionality over
+	  Chelsio T4-based 10Gb Converged Network Adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called csiostor.
diff --git a/drivers/scsi/csiostor/Makefile b/drivers/scsi/csiostor/Makefile
new file mode 100644
index 0000000..b581966
--- /dev/null
+++ b/drivers/scsi/csiostor/Makefile
@@ -0,0 +1,11 @@
+#
+## Chelsio FCoE driver
+#
+##
+
+ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
+
+obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor.o
+
+csiostor-objs := csio_attr.o csio_init.o csio_lnode.o csio_scsi.o \
+		csio_hw.o csio_isr.o csio_mb.o csio_rnode.o csio_wr.o
diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c
new file mode 100644
index 0000000..065a87a
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_attr.c
@@ -0,0 +1,796 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/jiffies.h>
+#include <scsi/fc/fc_fs.h>
+
+#include "csio_init.h"
+
+static void
+csio_vport_set_state(struct csio_lnode *ln);
+
+/*
+ * csio_reg_rnode - Register a remote port with FC transport.
+ * @rn: Rnode representing remote port.
+ *
+ * Call fc_remote_port_add() to register this remote port with FC transport.
+ * If remote port is Initiator OR Target OR both, change the role appropriately.
+ *
+ */
+void
+csio_reg_rnode(struct csio_rnode *rn)
+{
+	struct csio_lnode *ln		= csio_rnode_to_lnode(rn);
+	struct Scsi_Host *shost		= csio_ln_to_shost(ln);
+	struct fc_rport_identifiers ids;
+	struct fc_rport  *rport;
+	struct csio_service_parms *sp;
+
+	ids.node_name	= wwn_to_u64(csio_rn_wwnn(rn));
+	ids.port_name	= wwn_to_u64(csio_rn_wwpn(rn));
+	ids.port_id	= rn->nport_id;
+	ids.roles	= FC_RPORT_ROLE_UNKNOWN;
+
+	if (rn->role & CSIO_RNFR_INITIATOR || rn->role & CSIO_RNFR_TARGET) {
+		rport = rn->rport;
+		CSIO_ASSERT(rport != NULL);
+		goto update_role;
+	}
+
+	rn->rport = fc_remote_port_add(shost, 0, &ids);
+	if (!rn->rport) {
+		csio_ln_err(ln, "Failed to register rport = 0x%x.\n",
+					rn->nport_id);
+		return;
+	}
+
+	ln->num_reg_rnodes++;
+	rport = rn->rport;
+	spin_lock_irq(shost->host_lock);
+	*((struct csio_rnode **)rport->dd_data) = rn;
+	spin_unlock_irq(shost->host_lock);
+
+	sp = &rn->rn_sparm;
+	rport->maxframe_size = ntohs(sp->csp.sp_bb_data);
+	if (ntohs(sp->clsp[2].cp_class) & FC_CPC_VALID)
+		rport->supported_classes = FC_COS_CLASS3;
+	else
+		rport->supported_classes = FC_COS_UNSPECIFIED;
+update_role:
+	if (rn->role & CSIO_RNFR_INITIATOR)
+		ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+	if (rn->role & CSIO_RNFR_TARGET)
+		ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+
+	if (ids.roles != FC_RPORT_ROLE_UNKNOWN)
+		fc_remote_port_rolechg(rport, ids.roles);
+
+	rn->scsi_id = rport->scsi_target_id;
+
+	csio_ln_dbg(ln, "Remote port x%x role 0x%x registered\n",
+		rn->nport_id, ids.roles);
+}
+
+/*
+ * csio_unreg_rnode - Unregister a remote port with FC transport.
+ * @rn: Rnode representing remote port.
+ *
+ * Call fc_remote_port_delete() to unregister this remote port with FC
+ * transport.
+ *
+ */
+void
+csio_unreg_rnode(struct csio_rnode *rn)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	struct fc_rport *rport = rn->rport;
+
+	rn->role &= ~(CSIO_RNFR_INITIATOR | CSIO_RNFR_TARGET);
+	fc_remote_port_delete(rport);
+	ln->num_reg_rnodes--;
+
+	csio_ln_dbg(ln, "Remote port x%x un-registered\n", rn->nport_id);
+}
+
+/*
+ * csio_lnode_async_event - Async events from local port.
+ * @ln: lnode representing local port.
+ *
+ * Async events from local node that FC transport/SCSI ML
+ * should be made aware of (Eg: RSCN).
+ */
+void
+csio_lnode_async_event(struct csio_lnode *ln, enum csio_ln_fc_evt fc_evt)
+{
+	switch (fc_evt) {
+	case CSIO_LN_FC_RSCN:
+		/* Get payload of rscn from ln */
+		/* For each RSCN entry */
+			/*
+			 * fc_host_post_event(shost,
+			 *		      fc_get_event_number(),
+			 *		      FCH_EVT_RSCN,
+			 *		      rscn_entry);
+			 */
+		break;
+	case CSIO_LN_FC_LINKUP:
+		/* send fc_host_post_event */
+		/* set vport state */
+		if (csio_is_npiv_ln(ln))
+			csio_vport_set_state(ln);
+
+		break;
+	case CSIO_LN_FC_LINKDOWN:
+		/* send fc_host_post_event */
+		/* set vport state */
+		if (csio_is_npiv_ln(ln))
+			csio_vport_set_state(ln);
+
+		break;
+	case CSIO_LN_FC_ATTRIB_UPDATE:
+		csio_fchost_attr_init(ln);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * csio_fchost_attr_init - Initialize FC transport attributes
+ * @ln: Lnode.
+ *
+ */
+void
+csio_fchost_attr_init(struct csio_lnode *ln)
+{
+	struct Scsi_Host  *shost = csio_ln_to_shost(ln);
+
+	fc_host_node_name(shost) = wwn_to_u64(csio_ln_wwnn(ln));
+	fc_host_port_name(shost) = wwn_to_u64(csio_ln_wwpn(ln));
+
+	fc_host_supported_classes(shost) = FC_COS_CLASS3;
+	fc_host_max_npiv_vports(shost) =
+			(csio_lnode_to_hw(ln))->fres_info.max_vnps;
+	fc_host_supported_speeds(shost) = FC_PORTSPEED_10GBIT |
+		FC_PORTSPEED_1GBIT;
+
+	fc_host_maxframe_size(shost) = ntohs(ln->ln_sparm.csp.sp_bb_data);
+	memset(fc_host_supported_fc4s(shost), 0,
+		sizeof(fc_host_supported_fc4s(shost)));
+	fc_host_supported_fc4s(shost)[7] = 1;
+
+	memset(fc_host_active_fc4s(shost), 0,
+		sizeof(fc_host_active_fc4s(shost)));
+	fc_host_active_fc4s(shost)[7] = 1;
+}
+
+/*
+ * csio_get_host_port_id - sysfs entries for nport_id is
+ * populated/cached from this function
+ */
+static void
+csio_get_host_port_id(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln	= shost_priv(shost);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	spin_lock_irq(&hw->lock);
+	fc_host_port_id(shost) = ln->nport_id;
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_get_port_type - Return FC local port type.
+ * @shost: scsi host.
+ *
+ */
+static void
+csio_get_host_port_type(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	spin_lock_irq(&hw->lock);
+	if (csio_is_npiv_ln(ln))
+		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+	else
+		fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_get_port_state - Return FC local port state.
+ * @shost: scsi host.
+ *
+ */
+static void
+csio_get_host_port_state(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	char state[16];
+
+	spin_lock_irq(&hw->lock);
+
+	csio_lnode_state_to_str(ln, state);
+	if (!strcmp(state, "READY"))
+		fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+	else if (!strcmp(state, "OFFLINE"))
+		fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+	else
+		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_get_host_speed - Return link speed to FC transport.
+ * @shost: scsi host.
+ *
+ */
+static void
+csio_get_host_speed(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	spin_lock_irq(&hw->lock);
+	switch (hw->pport[ln->portid].link_speed) {
+	case FW_PORT_CAP_SPEED_1G:
+		fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+		break;
+	case FW_PORT_CAP_SPEED_10G:
+		fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+		break;
+	default:
+		fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+		break;
+	}
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_get_host_fabric_name - Return fabric name
+ * @shost: scsi host.
+ *
+ */
+static void
+csio_get_host_fabric_name(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	struct csio_rnode *rn = NULL;
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	spin_lock_irq(&hw->lock);
+	rn = csio_rnode_lookup_portid(ln, FC_FID_FLOGI);
+	if (rn)
+		fc_host_fabric_name(shost) = wwn_to_u64(csio_rn_wwnn(rn));
+	else
+		fc_host_fabric_name(shost) = 0;
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_get_host_speed - Return FC transport statistics.
+ * @ln: Lnode.
+ *
+ */
+static struct fc_host_statistics *
+csio_get_stats(struct Scsi_Host *shost)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct fc_host_statistics *fhs = &ln->fch_stats;
+	struct fw_fcoe_port_stats fcoe_port_stats;
+	uint64_t seconds;
+
+	memset(&fcoe_port_stats, 0, sizeof(struct fw_fcoe_port_stats));
+	csio_get_phy_port_stats(hw, ln->portid, &fcoe_port_stats);
+
+	fhs->tx_frames  += (be64_to_cpu(fcoe_port_stats.tx_bcast_frames) +
+			    be64_to_cpu(fcoe_port_stats.tx_mcast_frames) +
+			    be64_to_cpu(fcoe_port_stats.tx_ucast_frames) +
+			    be64_to_cpu(fcoe_port_stats.tx_offload_frames));
+	fhs->tx_words  += (be64_to_cpu(fcoe_port_stats.tx_bcast_bytes) +
+			   be64_to_cpu(fcoe_port_stats.tx_mcast_bytes) +
+			   be64_to_cpu(fcoe_port_stats.tx_ucast_bytes) +
+			   be64_to_cpu(fcoe_port_stats.tx_offload_bytes)) /
+							CSIO_WORD_TO_BYTE;
+	fhs->rx_frames += (be64_to_cpu(fcoe_port_stats.rx_bcast_frames) +
+			   be64_to_cpu(fcoe_port_stats.rx_mcast_frames) +
+			   be64_to_cpu(fcoe_port_stats.rx_ucast_frames));
+	fhs->rx_words += (be64_to_cpu(fcoe_port_stats.rx_bcast_bytes) +
+			  be64_to_cpu(fcoe_port_stats.rx_mcast_bytes) +
+			  be64_to_cpu(fcoe_port_stats.rx_ucast_bytes)) /
+							CSIO_WORD_TO_BYTE;
+	fhs->error_frames += be64_to_cpu(fcoe_port_stats.rx_err_frames);
+	fhs->fcp_input_requests +=  ln->stats.n_input_requests;
+	fhs->fcp_output_requests +=  ln->stats.n_output_requests;
+	fhs->fcp_control_requests +=  ln->stats.n_control_requests;
+	fhs->fcp_input_megabytes +=  ln->stats.n_input_bytes >> 20;
+	fhs->fcp_output_megabytes +=  ln->stats.n_output_bytes >> 20;
+	fhs->link_failure_count = ln->stats.n_link_down;
+	/* Reset stats for the device */
+	seconds = jiffies_to_msecs(jiffies) - hw->stats.n_reset_start;
+	do_div(seconds, 1000);
+	fhs->seconds_since_last_reset = seconds;
+
+	return fhs;
+}
+
+/*
+ * csio_set_rport_loss_tmo - Set the rport dev loss timeout
+ * @rport: fc rport.
+ * @timeout: new value for dev loss tmo.
+ *
+ * If timeout is non zero set the dev_loss_tmo to timeout, else set
+ * dev_loss_tmo to one.
+ */
+static void
+csio_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
+{
+	if (timeout)
+		rport->dev_loss_tmo = timeout;
+	else
+		rport->dev_loss_tmo = 1;
+}
+
+static void
+csio_vport_set_state(struct csio_lnode *ln)
+{
+	struct fc_vport *fc_vport = ln->fc_vport;
+	struct csio_lnode  *pln = ln->pln;
+	char state[16];
+
+	/* Set fc vport state based on phyiscal lnode */
+	csio_lnode_state_to_str(pln, state);
+	if (strcmp(state, "READY")) {
+		fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
+		return;
+	}
+
+	if (!(pln->flags & CSIO_LNF_NPIVSUPP)) {
+		fc_vport_set_state(fc_vport, FC_VPORT_NO_FABRIC_SUPP);
+		return;
+	}
+
+	/* Set fc vport state based on virtual lnode */
+	csio_lnode_state_to_str(ln, state);
+	if (strcmp(state, "READY")) {
+		fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
+		return;
+	}
+	fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE);
+}
+
+static int
+csio_fcoe_alloc_vnp(struct csio_hw *hw, struct csio_lnode *ln)
+{
+	struct csio_lnode *pln;
+	struct csio_mb  *mbp;
+	struct fw_fcoe_vnp_cmd *rsp;
+	int ret = 0;
+	int retry = 0;
+
+	/* Issue VNP cmd to alloc vport */
+	/* Allocate Mbox request */
+	spin_lock_irq(&hw->lock);
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	pln = ln->pln;
+	ln->fcf_flowid = pln->fcf_flowid;
+	ln->portid = pln->portid;
+
+	csio_fcoe_vnp_alloc_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO,
+				    pln->fcf_flowid, pln->vnp_flowid, 0,
+				    csio_ln_wwnn(ln), csio_ln_wwpn(ln), NULL);
+
+	for (retry = 0; retry < 3; retry++) {
+		/* FW is expected to complete vnp cmd in immediate mode
+		 * without much delay.
+		 * Otherwise, there will be increase in IO latency since HW
+		 * lock is held till completion of vnp mbox cmd.
+		 */
+		ret = csio_mb_issue(hw, mbp);
+		if (ret != -EBUSY)
+			break;
+
+		/* Retry if mbox returns busy */
+		spin_unlock_irq(&hw->lock);
+		msleep(2000);
+		spin_lock_irq(&hw->lock);
+	}
+
+	if (ret) {
+		csio_ln_err(ln, "Failed to issue mbox FCoE VNP command\n");
+		goto out_free;
+	}
+
+	/* Process Mbox response of VNP command */
+	rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb);
+	if (FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)) != FW_SUCCESS) {
+		csio_ln_err(ln, "FCOE VNP ALLOC cmd returned 0x%x!\n",
+			    FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)));
+		ret = -EINVAL;
+		goto out_free;
+	}
+
+	ln->vnp_flowid = FW_FCOE_VNP_CMD_VNPI_GET(
+				ntohl(rsp->gen_wwn_to_vnpi));
+	memcpy(csio_ln_wwnn(ln), rsp->vnport_wwnn, 8);
+	memcpy(csio_ln_wwpn(ln), rsp->vnport_wwpn, 8);
+
+	csio_ln_dbg(ln, "FCOE VNPI: 0x%x\n", ln->vnp_flowid);
+	csio_ln_dbg(ln, "\tWWNN: %x%x%x%x%x%x%x%x\n",
+		    ln->ln_sparm.wwnn[0], ln->ln_sparm.wwnn[1],
+		    ln->ln_sparm.wwnn[2], ln->ln_sparm.wwnn[3],
+		    ln->ln_sparm.wwnn[4], ln->ln_sparm.wwnn[5],
+		    ln->ln_sparm.wwnn[6], ln->ln_sparm.wwnn[7]);
+	csio_ln_dbg(ln, "\tWWPN: %x%x%x%x%x%x%x%x\n",
+		    ln->ln_sparm.wwpn[0], ln->ln_sparm.wwpn[1],
+		    ln->ln_sparm.wwpn[2], ln->ln_sparm.wwpn[3],
+		    ln->ln_sparm.wwpn[4], ln->ln_sparm.wwpn[5],
+		    ln->ln_sparm.wwpn[6], ln->ln_sparm.wwpn[7]);
+
+out_free:
+	mempool_free(mbp, hw->mb_mempool);
+out:
+	spin_unlock_irq(&hw->lock);
+	return ret;
+}
+
+static int
+csio_fcoe_free_vnp(struct csio_hw *hw, struct csio_lnode *ln)
+{
+	struct csio_lnode *pln;
+	struct csio_mb  *mbp;
+	struct fw_fcoe_vnp_cmd *rsp;
+	int ret = 0;
+	int retry = 0;
+
+	/* Issue VNP cmd to free vport */
+	/* Allocate Mbox request */
+
+	spin_lock_irq(&hw->lock);
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	pln = ln->pln;
+
+	csio_fcoe_vnp_free_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO,
+				   ln->fcf_flowid, ln->vnp_flowid,
+				   NULL);
+
+	for (retry = 0; retry < 3; retry++) {
+		ret = csio_mb_issue(hw, mbp);
+		if (ret != -EBUSY)
+			break;
+
+		/* Retry if mbox returns busy */
+		spin_unlock_irq(&hw->lock);
+		msleep(2000);
+		spin_lock_irq(&hw->lock);
+	}
+
+	if (ret) {
+		csio_ln_err(ln, "Failed to issue mbox FCoE VNP command\n");
+		goto out_free;
+	}
+
+	/* Process Mbox response of VNP command */
+	rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb);
+	if (FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)) != FW_SUCCESS) {
+		csio_ln_err(ln, "FCOE VNP FREE cmd returned 0x%x!\n",
+			    FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16)));
+		ret = -EINVAL;
+	}
+
+out_free:
+	mempool_free(mbp, hw->mb_mempool);
+out:
+	spin_unlock_irq(&hw->lock);
+	return ret;
+}
+
+static int
+csio_vport_create(struct fc_vport *fc_vport, bool disable)
+{
+	struct Scsi_Host *shost = fc_vport->shost;
+	struct csio_lnode *pln = shost_priv(shost);
+	struct csio_lnode *ln = NULL;
+	struct csio_hw *hw = csio_lnode_to_hw(pln);
+	uint8_t wwn[8];
+	int ret = -1;
+
+	ln = csio_shost_init(hw, &fc_vport->dev, false, pln);
+	if (!ln)
+		goto error;
+
+	if (fc_vport->node_name != 0) {
+		u64_to_wwn(fc_vport->node_name, wwn);
+
+		if (!CSIO_VALID_WWN(wwn)) {
+			csio_ln_err(ln,
+				    "vport create failed. Invalid wwnn\n");
+			goto error;
+		}
+		memcpy(csio_ln_wwnn(ln), wwn, 8);
+	}
+
+	if (fc_vport->port_name != 0) {
+		u64_to_wwn(fc_vport->port_name, wwn);
+
+		if (!CSIO_VALID_WWN(wwn)) {
+			csio_ln_err(ln,
+				    "vport create failed. Invalid wwpn\n");
+			goto error;
+		}
+
+		if (csio_lnode_lookup_by_wwpn(hw, wwn)) {
+			csio_ln_err(ln,
+			    "vport create failed. wwpn already exists\n");
+			goto error;
+		}
+		memcpy(csio_ln_wwpn(ln), wwn, 8);
+	}
+
+	fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING);
+
+	if (csio_fcoe_alloc_vnp(hw, ln))
+		goto error;
+
+	*(struct csio_lnode **)fc_vport->dd_data = ln;
+	ln->fc_vport = fc_vport;
+	if (!fc_vport->node_name)
+		fc_vport->node_name = wwn_to_u64(csio_ln_wwnn(ln));
+	if (!fc_vport->port_name)
+		fc_vport->port_name = wwn_to_u64(csio_ln_wwpn(ln));
+	csio_fchost_attr_init(ln);
+	return 0;
+error:
+	if (ln)
+		csio_shost_exit(ln);
+
+	return ret;
+}
+
+static int
+csio_vport_delete(struct fc_vport *fc_vport)
+{
+	struct csio_lnode *ln = *(struct csio_lnode **)fc_vport->dd_data;
+	struct Scsi_Host *shost = csio_ln_to_shost(ln);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	int rmv;
+
+	spin_lock_irq(&hw->lock);
+	rmv = csio_is_hw_removing(hw);
+	spin_unlock_irq(&hw->lock);
+
+	if (rmv) {
+		csio_shost_exit(ln);
+		return 0;
+	}
+
+	/* Quiesce ios and send remove event to lnode */
+	scsi_block_requests(shost);
+	spin_lock_irq(&hw->lock);
+	csio_scsim_cleanup_io_lnode(csio_hw_to_scsim(hw), ln);
+	csio_lnode_close(ln);
+	spin_unlock_irq(&hw->lock);
+	scsi_unblock_requests(shost);
+
+	/* Free vnp */
+	if (fc_vport->vport_state !=  FC_VPORT_DISABLED)
+		csio_fcoe_free_vnp(hw, ln);
+
+	csio_shost_exit(ln);
+	return 0;
+}
+
+static int
+csio_vport_disable(struct fc_vport *fc_vport, bool disable)
+{
+	struct csio_lnode *ln = *(struct csio_lnode **)fc_vport->dd_data;
+	struct Scsi_Host *shost = csio_ln_to_shost(ln);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	/* disable vport */
+	if (disable) {
+		/* Quiesce ios and send stop event to lnode */
+		scsi_block_requests(shost);
+		spin_lock_irq(&hw->lock);
+		csio_scsim_cleanup_io_lnode(csio_hw_to_scsim(hw), ln);
+		csio_lnode_stop(ln);
+		spin_unlock_irq(&hw->lock);
+		scsi_unblock_requests(shost);
+
+		/* Free vnp */
+		csio_fcoe_free_vnp(hw, ln);
+		fc_vport_set_state(fc_vport, FC_VPORT_DISABLED);
+		csio_ln_err(ln, "vport disabled\n");
+		return 0;
+	} else {
+		/* enable vport */
+		fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING);
+		if (csio_fcoe_alloc_vnp(hw, ln)) {
+			csio_ln_err(ln, "vport enabled failed.\n");
+			return -1;
+		}
+		csio_ln_err(ln, "vport enabled\n");
+		return 0;
+	}
+}
+
+static void
+csio_dev_loss_tmo_callbk(struct fc_rport *rport)
+{
+	struct csio_rnode *rn;
+	struct csio_hw *hw;
+	struct csio_lnode *ln;
+
+	rn = *((struct csio_rnode **)rport->dd_data);
+	ln = csio_rnode_to_lnode(rn);
+	hw = csio_lnode_to_hw(ln);
+
+	spin_lock_irq(&hw->lock);
+
+	/* return if driver is being removed or same rnode comes back online */
+	if (csio_is_hw_removing(hw) || csio_is_rnode_ready(rn))
+		goto out;
+
+	csio_ln_dbg(ln, "devloss timeout on rnode:%p portid:x%x flowid:x%x\n",
+		    rn, rn->nport_id, csio_rn_flowid(rn));
+
+	CSIO_INC_STATS(ln, n_dev_loss_tmo);
+
+	/*
+	 * enqueue devloss event to event worker thread to serialize all
+	 * rnode events.
+	 */
+	if (csio_enqueue_evt(hw, CSIO_EVT_DEV_LOSS, &rn, sizeof(rn))) {
+		CSIO_INC_STATS(hw, n_evt_drop);
+		goto out;
+	}
+
+	if (!(hw->flags & CSIO_HWF_FWEVT_PENDING)) {
+		hw->flags |= CSIO_HWF_FWEVT_PENDING;
+		spin_unlock_irq(&hw->lock);
+		schedule_work(&hw->evtq_work);
+		return;
+	}
+
+out:
+	spin_unlock_irq(&hw->lock);
+}
+
+/* FC transport functions template - Physical port */
+struct fc_function_template csio_fc_transport_funcs = {
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+	.show_host_supported_fc4s = 1,
+	.show_host_maxframe_size = 1,
+
+	.get_host_port_id = csio_get_host_port_id,
+	.show_host_port_id = 1,
+
+	.get_host_port_type = csio_get_host_port_type,
+	.show_host_port_type = 1,
+
+	.get_host_port_state = csio_get_host_port_state,
+	.show_host_port_state = 1,
+
+	.show_host_active_fc4s = 1,
+	.get_host_speed = csio_get_host_speed,
+	.show_host_speed = 1,
+	.get_host_fabric_name = csio_get_host_fabric_name,
+	.show_host_fabric_name = 1,
+
+	.get_fc_host_stats = csio_get_stats,
+
+	.dd_fcrport_size = sizeof(struct csio_rnode *),
+	.show_rport_maxframe_size = 1,
+	.show_rport_supported_classes = 1,
+
+	.set_rport_dev_loss_tmo = csio_set_rport_loss_tmo,
+	.show_rport_dev_loss_tmo = 1,
+
+	.show_starget_port_id = 1,
+	.show_starget_node_name = 1,
+	.show_starget_port_name = 1,
+
+	.dev_loss_tmo_callbk = csio_dev_loss_tmo_callbk,
+	.dd_fcvport_size = sizeof(struct csio_lnode *),
+
+	.vport_create = csio_vport_create,
+	.vport_disable = csio_vport_disable,
+	.vport_delete = csio_vport_delete,
+};
+
+/* FC transport functions template - Virtual  port */
+struct fc_function_template csio_fc_transport_vport_funcs = {
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+	.show_host_supported_classes = 1,
+	.show_host_supported_fc4s = 1,
+	.show_host_maxframe_size = 1,
+
+	.get_host_port_id = csio_get_host_port_id,
+	.show_host_port_id = 1,
+
+	.get_host_port_type = csio_get_host_port_type,
+	.show_host_port_type = 1,
+
+	.get_host_port_state = csio_get_host_port_state,
+	.show_host_port_state = 1,
+	.show_host_active_fc4s = 1,
+
+	.get_host_speed = csio_get_host_speed,
+	.show_host_speed = 1,
+
+	.get_host_fabric_name = csio_get_host_fabric_name,
+	.show_host_fabric_name = 1,
+
+	.get_fc_host_stats = csio_get_stats,
+
+	.dd_fcrport_size = sizeof(struct csio_rnode *),
+	.show_rport_maxframe_size = 1,
+	.show_rport_supported_classes = 1,
+
+	.set_rport_dev_loss_tmo = csio_set_rport_loss_tmo,
+	.show_rport_dev_loss_tmo = 1,
+
+	.show_starget_port_id = 1,
+	.show_starget_node_name = 1,
+	.show_starget_port_name = 1,
+
+	.dev_loss_tmo_callbk = csio_dev_loss_tmo_callbk,
+
+};
diff --git a/drivers/scsi/csiostor/csio_defs.h b/drivers/scsi/csiostor/csio_defs.h
new file mode 100644
index 0000000..c38017b
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_defs.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_DEFS_H__
+#define __CSIO_DEFS_H__
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+
+#define CSIO_INVALID_IDX		0xFFFFFFFF
+#define CSIO_INC_STATS(elem, val)	((elem)->stats.val++)
+#define CSIO_DEC_STATS(elem, val)	((elem)->stats.val--)
+#define CSIO_VALID_WWN(__n)		((*__n >> 4) == 0x5 ? true : false)
+#define CSIO_DID_MASK			0xFFFFFF
+#define CSIO_WORD_TO_BYTE		4
+
+#ifndef readq
+static inline u64 readq(void __iomem *addr)
+{
+	return readl(addr) + ((u64)readl(addr + 4) << 32);
+}
+
+static inline void writeq(u64 val, void __iomem *addr)
+{
+	writel(val, addr);
+	writel(val >> 32, addr + 4);
+}
+#endif
+
+static inline int
+csio_list_deleted(struct list_head *list)
+{
+	return ((list->next == list) && (list->prev == list));
+}
+
+#define csio_list_next(elem)	(((struct list_head *)(elem))->next)
+#define csio_list_prev(elem)	(((struct list_head *)(elem))->prev)
+
+/* State machine */
+typedef void (*csio_sm_state_t)(void *, uint32_t);
+
+struct csio_sm {
+	struct list_head	sm_list;
+	csio_sm_state_t		sm_state;
+};
+
+static inline void
+csio_set_state(void *smp, void *state)
+{
+	((struct csio_sm *)smp)->sm_state = (csio_sm_state_t)state;
+}
+
+static inline void
+csio_init_state(struct csio_sm *smp, void *state)
+{
+	csio_set_state(smp, state);
+}
+
+static inline void
+csio_post_event(void *smp, uint32_t evt)
+{
+	((struct csio_sm *)smp)->sm_state(smp, evt);
+}
+
+static inline csio_sm_state_t
+csio_get_state(void *smp)
+{
+	return ((struct csio_sm *)smp)->sm_state;
+}
+
+static inline bool
+csio_match_state(void *smp, void *state)
+{
+	return (csio_get_state(smp) == (csio_sm_state_t)state);
+}
+
+#define	CSIO_ASSERT(cond)		BUG_ON(!(cond))
+
+#ifdef __CSIO_DEBUG__
+#define CSIO_DB_ASSERT(__c)		CSIO_ASSERT((__c))
+#else
+#define CSIO_DB_ASSERT(__c)
+#endif
+
+#endif /* ifndef __CSIO_DEFS_H__ */
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
new file mode 100644
index 0000000..8ecdb94
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -0,0 +1,4395 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/firmware.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+
+#include "csio_hw.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+
+int csio_force_master;
+int csio_dbg_level = 0xFEFF;
+unsigned int csio_port_mask = 0xf;
+
+/* Default FW event queue entries. */
+static uint32_t csio_evtq_sz = CSIO_EVTQ_SIZE;
+
+/* Default MSI param level */
+int csio_msi = 2;
+
+/* FCoE function instances */
+static int dev_num;
+
+/* FCoE Adapter types & its description */
+static const struct csio_adap_desc csio_fcoe_adapters[] = {
+	{"T440-Dbg 10G", "Chelsio T440-Dbg 10G [FCoE]"},
+	{"T420-CR 10G", "Chelsio T420-CR 10G [FCoE]"},
+	{"T422-CR 10G/1G", "Chelsio T422-CR 10G/1G [FCoE]"},
+	{"T440-CR 10G", "Chelsio T440-CR 10G [FCoE]"},
+	{"T420-BCH 10G", "Chelsio T420-BCH 10G [FCoE]"},
+	{"T440-BCH 10G", "Chelsio T440-BCH 10G [FCoE]"},
+	{"T440-CH 10G", "Chelsio T440-CH 10G [FCoE]"},
+	{"T420-SO 10G", "Chelsio T420-SO 10G [FCoE]"},
+	{"T420-CX4 10G", "Chelsio T420-CX4 10G [FCoE]"},
+	{"T420-BT 10G", "Chelsio T420-BT 10G [FCoE]"},
+	{"T404-BT 1G", "Chelsio T404-BT 1G [FCoE]"},
+	{"B420-SR 10G", "Chelsio B420-SR 10G [FCoE]"},
+	{"B404-BT 1G", "Chelsio B404-BT 1G [FCoE]"},
+	{"T480-CR 10G", "Chelsio T480-CR 10G [FCoE]"},
+	{"T440-LP-CR 10G", "Chelsio T440-LP-CR 10G [FCoE]"},
+	{"T4 FPGA", "Chelsio T4 FPGA [FCoE]"}
+};
+
+static void csio_mgmtm_cleanup(struct csio_mgmtm *);
+static void csio_hw_mbm_cleanup(struct csio_hw *);
+
+/* State machine forward declarations */
+static void csio_hws_uninit(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_configuring(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_initializing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_ready(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_quiescing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_quiesced(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_resetting(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_removing(struct csio_hw *, enum csio_hw_ev);
+static void csio_hws_pcierr(struct csio_hw *, enum csio_hw_ev);
+
+static void csio_hw_initialize(struct csio_hw *hw);
+static void csio_evtq_stop(struct csio_hw *hw);
+static void csio_evtq_start(struct csio_hw *hw);
+
+int csio_is_hw_ready(struct csio_hw *hw)
+{
+	return csio_match_state(hw, csio_hws_ready);
+}
+
+int csio_is_hw_removing(struct csio_hw *hw)
+{
+	return csio_match_state(hw, csio_hws_removing);
+}
+
+
+/*
+ *	csio_hw_wait_op_done_val - wait until an operation is completed
+ *	@hw: the HW module
+ *	@reg: the register to check for completion
+ *	@mask: a single-bit field within @reg that indicates completion
+ *	@polarity: the value of the field when the operation is completed
+ *	@attempts: number of check iterations
+ *	@delay: delay in usecs between iterations
+ *	@valp: where to store the value of the register at completion time
+ *
+ *	Wait until an operation is completed by checking a bit in a register
+ *	up to @attempts times.  If @valp is not NULL the value of the register
+ *	at the time it indicated completion is stored there.  Returns 0 if the
+ *	operation completes and	-EAGAIN	otherwise.
+ */
+static int
+csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask,
+			 int polarity, int attempts, int delay, uint32_t *valp)
+{
+	uint32_t val;
+	while (1) {
+		val = csio_rd_reg32(hw, reg);
+
+		if (!!(val & mask) == polarity) {
+			if (valp)
+				*valp = val;
+			return 0;
+		}
+
+		if (--attempts == 0)
+			return -EAGAIN;
+		if (delay)
+			udelay(delay);
+	}
+}
+
+void
+csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask,
+		   uint32_t value)
+{
+	uint32_t val = csio_rd_reg32(hw, reg) & ~mask;
+
+	csio_wr_reg32(hw, val | value, reg);
+	/* Flush */
+	csio_rd_reg32(hw, reg);
+
+}
+
+/*
+ *	csio_hw_mc_read - read from MC through backdoor accesses
+ *	@hw: the hw module
+ *	@addr: address of first byte requested
+ *	@data: 64 bytes of data containing the requested address
+ *	@ecc: where to store the corresponding 64-bit ECC word
+ *
+ *	Read 64 bytes of data from MC starting at a 64-byte-aligned address
+ *	that covers the requested address @addr.  If @parity is not %NULL it
+ *	is assigned the 64-bit ECC word for the read data.
+ */
+int
+csio_hw_mc_read(struct csio_hw *hw, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+
+	if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR);
+	csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN);
+	csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN);
+	csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST |  BIST_CMD_GAP(1),
+		      MC_BIST_CMD);
+	i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST,
+		 0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, MC_DATA(16));
+#undef MC_DATA
+	return 0;
+}
+
+/*
+ *	csio_hw_edc_read - read from EDC through backdoor accesses
+ *	@hw: the hw module
+ *	@idx: which EDC to access
+ *	@addr: address of first byte requested
+ *	@data: 64 bytes of data containing the requested address
+ *	@ecc: where to store the corresponding 64-bit ECC word
+ *
+ *	Read 64 bytes of data from EDC starting at a 64-byte-aligned address
+ *	that covers the requested address @addr.  If @parity is not %NULL it
+ *	is assigned the 64-bit ECC word for the read data.
+ */
+int
+csio_hw_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+
+	idx *= EDC_STRIDE;
+	if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx);
+	csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx);
+	csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx);
+	csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST,
+		     EDC_BIST_CMD + idx);
+	i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST,
+		 0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, EDC_DATA(16));
+#undef EDC_DATA
+	return 0;
+}
+
+/*
+ *      csio_mem_win_rw - read/write memory through PCIE memory window
+ *      @hw: the adapter
+ *      @addr: address of first byte requested
+ *      @data: MEMWIN0_APERTURE bytes of data containing the requested address
+ *      @dir: direction of transfer 1 => read, 0 => write
+ *
+ *      Read/write MEMWIN0_APERTURE bytes of data from MC starting at a
+ *      MEMWIN0_APERTURE-byte-aligned address that covers the requested
+ *      address @addr.
+ */
+static int
+csio_mem_win_rw(struct csio_hw *hw, u32 addr, u32 *data, int dir)
+{
+	int i;
+
+	/*
+	 * Setup offset into PCIE memory window.  Address must be a
+	 * MEMWIN0_APERTURE-byte-aligned address.  (Read back MA register to
+	 * ensure that changes propagate before we attempt to use the new
+	 * values.)
+	 */
+	csio_wr_reg32(hw, addr & ~(MEMWIN0_APERTURE - 1),
+			PCIE_MEM_ACCESS_OFFSET);
+	csio_rd_reg32(hw, PCIE_MEM_ACCESS_OFFSET);
+
+	/* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */
+	for (i = 0; i < MEMWIN0_APERTURE; i = i + sizeof(__be32)) {
+		if (dir)
+			*data++ = csio_rd_reg32(hw, (MEMWIN0_BASE + i));
+		else
+			csio_wr_reg32(hw, *data++, (MEMWIN0_BASE + i));
+	}
+
+	return 0;
+}
+
+/*
+ *      csio_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
+ *      @hw: the csio_hw
+ *      @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
+ *      @addr: address within indicated memory type
+ *      @len: amount of memory to transfer
+ *      @buf: host memory buffer
+ *      @dir: direction of transfer 1 => read, 0 => write
+ *
+ *      Reads/writes an [almost] arbitrary memory region in the firmware: the
+ *      firmware memory address, length and host buffer must be aligned on
+ *      32-bit boudaries.  The memory is transferred as a raw byte sequence
+ *      from/to the firmware's memory.  If this memory contains data
+ *      structures which contain multi-byte integers, it's the callers
+ *      responsibility to perform appropriate byte order conversions.
+ */
+static int
+csio_memory_rw(struct csio_hw *hw, int mtype, u32 addr, u32 len,
+		uint32_t *buf, int dir)
+{
+	uint32_t pos, start, end, offset, memoffset;
+	int ret;
+	uint32_t *data;
+
+	/*
+	 * Argument sanity checks ...
+	 */
+	if ((addr & 0x3) || (len & 0x3))
+		return -EINVAL;
+
+	data = kzalloc(MEMWIN0_APERTURE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Offset into the region of memory which is being accessed
+	 * MEM_EDC0 = 0
+	 * MEM_EDC1 = 1
+	 * MEM_MC   = 2
+	 */
+	memoffset = (mtype * (5 * 1024 * 1024));
+
+	/* Determine the PCIE_MEM_ACCESS_OFFSET */
+	addr = addr + memoffset;
+
+	/*
+	 * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes
+	 * at a time so we need to round down the start and round up the end.
+	 * We'll start copying out of the first line at (addr - start) a word
+	 * at a time.
+	 */
+	start = addr & ~(MEMWIN0_APERTURE-1);
+	end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1);
+	offset = (addr - start)/sizeof(__be32);
+
+	for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) {
+		/*
+		 * If we're writing, copy the data from the caller's memory
+		 * buffer
+		 */
+		if (!dir) {
+			/*
+			 * If we're doing a partial write, then we need to do
+			 * a read-modify-write ...
+			 */
+			if (offset || len < MEMWIN0_APERTURE) {
+				ret = csio_mem_win_rw(hw, pos, data, 1);
+				if (ret) {
+					kfree(data);
+					return ret;
+				}
+			}
+			while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
+								len > 0) {
+				data[offset++] = *buf++;
+				len -= sizeof(__be32);
+			}
+		}
+
+		/*
+		 * Transfer a block of memory and bail if there's an error.
+		 */
+		ret = csio_mem_win_rw(hw, pos, data, dir);
+		if (ret) {
+			kfree(data);
+			return ret;
+		}
+
+		/*
+		 * If we're reading, copy the data into the caller's memory
+		 * buffer.
+		 */
+		if (dir)
+			while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
+								len > 0) {
+				*buf++ = data[offset++];
+				len -= sizeof(__be32);
+			}
+	}
+
+	kfree(data);
+
+	return 0;
+}
+
+static int
+csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf)
+{
+	return csio_memory_rw(hw, mtype, addr, len, buf, 0);
+}
+
+/*
+ * EEPROM reads take a few tens of us while writes can take a bit over 5 ms.
+ */
+#define EEPROM_MAX_RD_POLL 40
+#define EEPROM_MAX_WR_POLL 6
+#define EEPROM_STAT_ADDR   0x7bfc
+#define VPD_BASE           0x400
+#define VPD_BASE_OLD	   0
+#define VPD_LEN            512
+#define VPD_INFO_FLD_HDR_SIZE	3
+
+/*
+ *	csio_hw_seeprom_read - read a serial EEPROM location
+ *	@hw: hw to read
+ *	@addr: EEPROM virtual address
+ *	@data: where to store the read data
+ *
+ *	Read a 32-bit word from a location in serial EEPROM using the card's PCI
+ *	VPD capability.  Note that this function must be called with a virtual
+ *	address.
+ */
+static int
+csio_hw_seeprom_read(struct csio_hw *hw, uint32_t addr, uint32_t *data)
+{
+	uint16_t val = 0;
+	int attempts = EEPROM_MAX_RD_POLL;
+	uint32_t base = hw->params.pci.vpd_cap_addr;
+
+	if (addr >= EEPROMVSIZE || (addr & 3))
+		return -EINVAL;
+
+	pci_write_config_word(hw->pdev, base + PCI_VPD_ADDR, (uint16_t)addr);
+
+	do {
+		udelay(10);
+		pci_read_config_word(hw->pdev, base + PCI_VPD_ADDR, &val);
+	} while (!(val & PCI_VPD_ADDR_F) && --attempts);
+
+	if (!(val & PCI_VPD_ADDR_F)) {
+		csio_err(hw, "reading EEPROM address 0x%x failed\n", addr);
+		return -EINVAL;
+	}
+
+	pci_read_config_dword(hw->pdev, base + PCI_VPD_DATA, data);
+	*data = le32_to_cpu(*data);
+
+	return 0;
+}
+
+/*
+ * Partial EEPROM Vital Product Data structure.  Includes only the ID and
+ * VPD-R sections.
+ */
+struct t4_vpd_hdr {
+	u8  id_tag;
+	u8  id_len[2];
+	u8  id_data[ID_LEN];
+	u8  vpdr_tag;
+	u8  vpdr_len[2];
+};
+
+/*
+ *	csio_hw_get_vpd_keyword_val - Locates an information field keyword in
+ *				      the VPD
+ *	@v: Pointer to buffered vpd data structure
+ *	@kw: The keyword to search for
+ *
+ *	Returns the value of the information field keyword or
+ *	-EINVAL otherwise.
+ */
+static int
+csio_hw_get_vpd_keyword_val(const struct t4_vpd_hdr *v, const char *kw)
+{
+	int32_t i;
+	int32_t offset , len;
+	const uint8_t *buf = &v->id_tag;
+	const uint8_t *vpdr_len = &v->vpdr_tag;
+	offset = sizeof(struct t4_vpd_hdr);
+	len =  (uint16_t)vpdr_len[1] + ((uint16_t)vpdr_len[2] << 8);
+
+	if (len + sizeof(struct t4_vpd_hdr) > VPD_LEN)
+		return -EINVAL;
+
+	for (i = offset; (i + VPD_INFO_FLD_HDR_SIZE) <= (offset + len);) {
+		if (memcmp(buf + i , kw, 2) == 0) {
+			i += VPD_INFO_FLD_HDR_SIZE;
+			return i;
+		}
+
+		i += VPD_INFO_FLD_HDR_SIZE + buf[i+2];
+	}
+
+	return -EINVAL;
+}
+
+static int
+csio_pci_capability(struct pci_dev *pdev, int cap, int *pos)
+{
+	*pos = pci_find_capability(pdev, cap);
+	if (*pos)
+		return 0;
+
+	return -1;
+}
+
+/*
+ *	csio_hw_get_vpd_params - read VPD parameters from VPD EEPROM
+ *	@hw: HW module
+ *	@p: where to store the parameters
+ *
+ *	Reads card parameters stored in VPD EEPROM.
+ */
+static int
+csio_hw_get_vpd_params(struct csio_hw *hw, struct csio_vpd *p)
+{
+	int i, ret, ec, sn, addr;
+	uint8_t *vpd, csum;
+	const struct t4_vpd_hdr *v;
+	/* To get around compilation warning from strstrip */
+	char *s;
+
+	if (csio_is_valid_vpd(hw))
+		return 0;
+
+	ret = csio_pci_capability(hw->pdev, PCI_CAP_ID_VPD,
+				  &hw->params.pci.vpd_cap_addr);
+	if (ret)
+		return -EINVAL;
+
+	vpd = kzalloc(VPD_LEN, GFP_ATOMIC);
+	if (vpd == NULL)
+		return -ENOMEM;
+
+	/*
+	 * Card information normally starts at VPD_BASE but early cards had
+	 * it at 0.
+	 */
+	ret = csio_hw_seeprom_read(hw, VPD_BASE, (uint32_t *)(vpd));
+	addr = *vpd == 0x82 ? VPD_BASE : VPD_BASE_OLD;
+
+	for (i = 0; i < VPD_LEN; i += 4) {
+		ret = csio_hw_seeprom_read(hw, addr + i, (uint32_t *)(vpd + i));
+		if (ret) {
+			kfree(vpd);
+			return ret;
+		}
+	}
+
+	/* Reset the VPD flag! */
+	hw->flags &= (~CSIO_HWF_VPD_VALID);
+
+	v = (const struct t4_vpd_hdr *)vpd;
+
+#define FIND_VPD_KW(var, name) do { \
+	var = csio_hw_get_vpd_keyword_val(v, name); \
+	if (var < 0) { \
+		csio_err(hw, "missing VPD keyword " name "\n"); \
+		kfree(vpd); \
+		return -EINVAL; \
+	} \
+} while (0)
+
+	FIND_VPD_KW(i, "RV");
+	for (csum = 0; i >= 0; i--)
+		csum += vpd[i];
+
+	if (csum) {
+		csio_err(hw, "corrupted VPD EEPROM, actual csum %u\n", csum);
+		kfree(vpd);
+		return -EINVAL;
+	}
+	FIND_VPD_KW(ec, "EC");
+	FIND_VPD_KW(sn, "SN");
+#undef FIND_VPD_KW
+
+	memcpy(p->id, v->id_data, ID_LEN);
+	s = strstrip(p->id);
+	memcpy(p->ec, vpd + ec, EC_LEN);
+	s = strstrip(p->ec);
+	i = vpd[sn - VPD_INFO_FLD_HDR_SIZE + 2];
+	memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
+	s = strstrip(p->sn);
+
+	csio_valid_vpd_copied(hw);
+
+	kfree(vpd);
+	return 0;
+}
+
+/*
+ *	csio_hw_sf1_read - read data from the serial flash
+ *	@hw: the HW module
+ *	@byte_cnt: number of bytes to read
+ *	@cont: whether another operation will be chained
+ *      @lock: whether to lock SF for PL access only
+ *	@valp: where to store the read data
+ *
+ *	Reads up to 4 bytes of data from the serial flash.  The location of
+ *	the read needs to be specified prior to calling this by issuing the
+ *	appropriate commands to the serial flash.
+ */
+static int
+csio_hw_sf1_read(struct csio_hw *hw, uint32_t byte_cnt, int32_t cont,
+		 int32_t lock, uint32_t *valp)
+{
+	int ret;
+
+	if (!byte_cnt || byte_cnt > 4)
+		return -EINVAL;
+	if (csio_rd_reg32(hw, SF_OP) & SF_BUSY)
+		return -EBUSY;
+
+	cont = cont ? SF_CONT : 0;
+	lock = lock ? SF_LOCK : 0;
+
+	csio_wr_reg32(hw, lock | cont | BYTECNT(byte_cnt - 1), SF_OP);
+	ret = csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS,
+					 10, NULL);
+	if (!ret)
+		*valp = csio_rd_reg32(hw, SF_DATA);
+	return ret;
+}
+
+/*
+ *	csio_hw_sf1_write - write data to the serial flash
+ *	@hw: the HW module
+ *	@byte_cnt: number of bytes to write
+ *	@cont: whether another operation will be chained
+ *      @lock: whether to lock SF for PL access only
+ *	@val: value to write
+ *
+ *	Writes up to 4 bytes of data to the serial flash.  The location of
+ *	the write needs to be specified prior to calling this by issuing the
+ *	appropriate commands to the serial flash.
+ */
+static int
+csio_hw_sf1_write(struct csio_hw *hw, uint32_t byte_cnt, uint32_t cont,
+		  int32_t lock, uint32_t val)
+{
+	if (!byte_cnt || byte_cnt > 4)
+		return -EINVAL;
+	if (csio_rd_reg32(hw, SF_OP) & SF_BUSY)
+		return -EBUSY;
+
+	cont = cont ? SF_CONT : 0;
+	lock = lock ? SF_LOCK : 0;
+
+	csio_wr_reg32(hw, val, SF_DATA);
+	csio_wr_reg32(hw, cont | BYTECNT(byte_cnt - 1) | OP_WR | lock, SF_OP);
+
+	return csio_hw_wait_op_done_val(hw, SF_OP, SF_BUSY, 0, SF_ATTEMPTS,
+					10, NULL);
+}
+
+/*
+ *	csio_hw_flash_wait_op - wait for a flash operation to complete
+ *	@hw: the HW module
+ *	@attempts: max number of polls of the status register
+ *	@delay: delay between polls in ms
+ *
+ *	Wait for a flash operation to complete by polling the status register.
+ */
+static int
+csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay)
+{
+	int ret;
+	uint32_t status;
+
+	while (1) {
+		ret = csio_hw_sf1_write(hw, 1, 1, 1, SF_RD_STATUS);
+		if (ret != 0)
+			return ret;
+
+		ret = csio_hw_sf1_read(hw, 1, 0, 1, &status);
+		if (ret != 0)
+			return ret;
+
+		if (!(status & 1))
+			return 0;
+		if (--attempts == 0)
+			return -EAGAIN;
+		if (delay)
+			msleep(delay);
+	}
+}
+
+/*
+ *	csio_hw_read_flash - read words from serial flash
+ *	@hw: the HW module
+ *	@addr: the start address for the read
+ *	@nwords: how many 32-bit words to read
+ *	@data: where to store the read data
+ *	@byte_oriented: whether to store data as bytes or as words
+ *
+ *	Read the specified number of 32-bit words from the serial flash.
+ *	If @byte_oriented is set the read data is stored as a byte array
+ *	(i.e., big-endian), otherwise as 32-bit words in the platform's
+ *	natural endianess.
+ */
+static int
+csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords,
+		  uint32_t *data, int32_t byte_oriented)
+{
+	int ret;
+
+	if (addr + nwords * sizeof(uint32_t) > hw->params.sf_size || (addr & 3))
+		return -EINVAL;
+
+	addr = swab32(addr) | SF_RD_DATA_FAST;
+
+	ret = csio_hw_sf1_write(hw, 4, 1, 0, addr);
+	if (ret != 0)
+		return ret;
+
+	ret = csio_hw_sf1_read(hw, 1, 1, 0, data);
+	if (ret != 0)
+		return ret;
+
+	for ( ; nwords; nwords--, data++) {
+		ret = csio_hw_sf1_read(hw, 4, nwords > 1, nwords == 1, data);
+		if (nwords == 1)
+			csio_wr_reg32(hw, 0, SF_OP);    /* unlock SF */
+		if (ret)
+			return ret;
+		if (byte_oriented)
+			*data = htonl(*data);
+	}
+	return 0;
+}
+
+/*
+ *	csio_hw_write_flash - write up to a page of data to the serial flash
+ *	@hw: the hw
+ *	@addr: the start address to write
+ *	@n: length of data to write in bytes
+ *	@data: the data to write
+ *
+ *	Writes up to a page of data (256 bytes) to the serial flash starting
+ *	at the given address.  All the data must be written to the same page.
+ */
+static int
+csio_hw_write_flash(struct csio_hw *hw, uint32_t addr,
+		    uint32_t n, const uint8_t *data)
+{
+	int ret = -EINVAL;
+	uint32_t buf[64];
+	uint32_t i, c, left, val, offset = addr & 0xff;
+
+	if (addr >= hw->params.sf_size || offset + n > SF_PAGE_SIZE)
+		return -EINVAL;
+
+	val = swab32(addr) | SF_PROG_PAGE;
+
+	ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE);
+	if (ret != 0)
+		goto unlock;
+
+	ret = csio_hw_sf1_write(hw, 4, 1, 1, val);
+	if (ret != 0)
+		goto unlock;
+
+	for (left = n; left; left -= c) {
+		c = min(left, 4U);
+		for (val = 0, i = 0; i < c; ++i)
+			val = (val << 8) + *data++;
+
+		ret = csio_hw_sf1_write(hw, c, c != left, 1, val);
+		if (ret)
+			goto unlock;
+	}
+	ret = csio_hw_flash_wait_op(hw, 8, 1);
+	if (ret)
+		goto unlock;
+
+	csio_wr_reg32(hw, 0, SF_OP);    /* unlock SF */
+
+	/* Read the page to verify the write succeeded */
+	ret = csio_hw_read_flash(hw, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+	if (ret)
+		return ret;
+
+	if (memcmp(data - n, (uint8_t *)buf + offset, n)) {
+		csio_err(hw,
+			 "failed to correctly write the flash page at %#x\n",
+			 addr);
+		return -EINVAL;
+	}
+
+	return 0;
+
+unlock:
+	csio_wr_reg32(hw, 0, SF_OP);    /* unlock SF */
+	return ret;
+}
+
+/*
+ *	csio_hw_flash_erase_sectors - erase a range of flash sectors
+ *	@hw: the HW module
+ *	@start: the first sector to erase
+ *	@end: the last sector to erase
+ *
+ *	Erases the sectors in the given inclusive range.
+ */
+static int
+csio_hw_flash_erase_sectors(struct csio_hw *hw, int32_t start, int32_t end)
+{
+	int ret = 0;
+
+	while (start <= end) {
+
+		ret = csio_hw_sf1_write(hw, 1, 0, 1, SF_WR_ENABLE);
+		if (ret != 0)
+			goto out;
+
+		ret = csio_hw_sf1_write(hw, 4, 0, 1,
+					SF_ERASE_SECTOR | (start << 8));
+		if (ret != 0)
+			goto out;
+
+		ret = csio_hw_flash_wait_op(hw, 14, 500);
+		if (ret != 0)
+			goto out;
+
+		start++;
+	}
+out:
+	if (ret)
+		csio_err(hw, "erase of flash sector %d failed, error %d\n",
+			 start, ret);
+	csio_wr_reg32(hw, 0, SF_OP);    /* unlock SF */
+	return 0;
+}
+
+/*
+ *	csio_hw_flash_cfg_addr - return the address of the flash
+ *				configuration file
+ *	@hw: the HW module
+ *
+ *	Return the address within the flash where the Firmware Configuration
+ *	File is stored.
+ */
+static unsigned int
+csio_hw_flash_cfg_addr(struct csio_hw *hw)
+{
+	if (hw->params.sf_size == 0x100000)
+		return FPGA_FLASH_CFG_OFFSET;
+	else
+		return FLASH_CFG_OFFSET;
+}
+
+static void
+csio_hw_print_fw_version(struct csio_hw *hw, char *str)
+{
+	csio_info(hw, "%s: %u.%u.%u.%u\n", str,
+		    FW_HDR_FW_VER_MAJOR_GET(hw->fwrev),
+		    FW_HDR_FW_VER_MINOR_GET(hw->fwrev),
+		    FW_HDR_FW_VER_MICRO_GET(hw->fwrev),
+		    FW_HDR_FW_VER_BUILD_GET(hw->fwrev));
+}
+
+/*
+ * csio_hw_get_fw_version - read the firmware version
+ * @hw: HW module
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+static int
+csio_hw_get_fw_version(struct csio_hw *hw, uint32_t *vers)
+{
+	return csio_hw_read_flash(hw, FW_IMG_START +
+				  offsetof(struct fw_hdr, fw_ver), 1,
+				  vers, 0);
+}
+
+/*
+ *	csio_hw_get_tp_version - read the TP microcode version
+ *	@hw: HW module
+ *	@vers: where to place the version
+ *
+ *	Reads the TP microcode version from flash.
+ */
+static int
+csio_hw_get_tp_version(struct csio_hw *hw, u32 *vers)
+{
+	return csio_hw_read_flash(hw, FLASH_FW_START +
+			offsetof(struct fw_hdr, tp_microcode_ver), 1,
+			vers, 0);
+}
+
+/*
+ *	csio_hw_check_fw_version - check if the FW is compatible with
+ *				   this driver
+ *	@hw: HW module
+ *
+ *	Checks if an adapter's FW is compatible with the driver.  Returns 0
+ *	if there's exact match, a negative error if the version could not be
+ *	read or there's a major/minor version mismatch/minor.
+ */
+static int
+csio_hw_check_fw_version(struct csio_hw *hw)
+{
+	int ret, major, minor, micro;
+
+	ret = csio_hw_get_fw_version(hw, &hw->fwrev);
+	if (!ret)
+		ret = csio_hw_get_tp_version(hw, &hw->tp_vers);
+	if (ret)
+		return ret;
+
+	major = FW_HDR_FW_VER_MAJOR_GET(hw->fwrev);
+	minor = FW_HDR_FW_VER_MINOR_GET(hw->fwrev);
+	micro = FW_HDR_FW_VER_MICRO_GET(hw->fwrev);
+
+	if (major != FW_VERSION_MAJOR) {            /* major mismatch - fail */
+		csio_err(hw, "card FW has major version %u, driver wants %u\n",
+			 major, FW_VERSION_MAJOR);
+		return -EINVAL;
+	}
+
+	if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO)
+		return 0;        /* perfect match */
+
+	/* Minor/micro version mismatch */
+	return -EINVAL;
+}
+
+/*
+ * csio_hw_fw_dload - download firmware.
+ * @hw: HW module
+ * @fw_data: firmware image to write.
+ * @size: image size
+ *
+ * Write the supplied firmware image to the card's serial flash.
+ */
+static int
+csio_hw_fw_dload(struct csio_hw *hw, uint8_t *fw_data, uint32_t size)
+{
+	uint32_t csum;
+	int32_t addr;
+	int ret;
+	uint32_t i;
+	uint8_t first_page[SF_PAGE_SIZE];
+	const __be32 *p = (const __be32 *)fw_data;
+	struct fw_hdr *hdr = (struct fw_hdr *)fw_data;
+	uint32_t sf_sec_size;
+
+	if ((!hw->params.sf_size) || (!hw->params.sf_nsec)) {
+		csio_err(hw, "Serial Flash data invalid\n");
+		return -EINVAL;
+	}
+
+	if (!size) {
+		csio_err(hw, "FW image has no data\n");
+		return -EINVAL;
+	}
+
+	if (size & 511) {
+		csio_err(hw, "FW image size not multiple of 512 bytes\n");
+		return -EINVAL;
+	}
+
+	if (ntohs(hdr->len512) * 512 != size) {
+		csio_err(hw, "FW image size differs from size in FW header\n");
+		return -EINVAL;
+	}
+
+	if (size > FW_MAX_SIZE) {
+		csio_err(hw, "FW image too large, max is %u bytes\n",
+			    FW_MAX_SIZE);
+		return -EINVAL;
+	}
+
+	for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+		csum += ntohl(p[i]);
+
+	if (csum != 0xffffffff) {
+		csio_err(hw, "corrupted firmware image, checksum %#x\n", csum);
+		return -EINVAL;
+	}
+
+	sf_sec_size = hw->params.sf_size / hw->params.sf_nsec;
+	i = DIV_ROUND_UP(size, sf_sec_size);        /* # of sectors spanned */
+
+	csio_dbg(hw, "Erasing sectors... start:%d end:%d\n",
+			  FW_START_SEC, FW_START_SEC + i - 1);
+
+	ret = csio_hw_flash_erase_sectors(hw, FW_START_SEC,
+					  FW_START_SEC + i - 1);
+	if (ret) {
+		csio_err(hw, "Flash Erase failed\n");
+		goto out;
+	}
+
+	/*
+	 * We write the correct version at the end so the driver can see a bad
+	 * version if the FW write fails.  Start by writing a copy of the
+	 * first page with a bad version.
+	 */
+	memcpy(first_page, fw_data, SF_PAGE_SIZE);
+	((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
+	ret = csio_hw_write_flash(hw, FW_IMG_START, SF_PAGE_SIZE, first_page);
+	if (ret)
+		goto out;
+
+	csio_dbg(hw, "Writing Flash .. start:%d end:%d\n",
+		    FW_IMG_START, FW_IMG_START + size);
+
+	addr = FW_IMG_START;
+	for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
+		addr += SF_PAGE_SIZE;
+		fw_data += SF_PAGE_SIZE;
+		ret = csio_hw_write_flash(hw, addr, SF_PAGE_SIZE, fw_data);
+		if (ret)
+			goto out;
+	}
+
+	ret = csio_hw_write_flash(hw,
+				  FW_IMG_START +
+					offsetof(struct fw_hdr, fw_ver),
+				  sizeof(hdr->fw_ver),
+				  (const uint8_t *)&hdr->fw_ver);
+
+out:
+	if (ret)
+		csio_err(hw, "firmware download failed, error %d\n", ret);
+	return ret;
+}
+
+static int
+csio_hw_get_flash_params(struct csio_hw *hw)
+{
+	int ret;
+	uint32_t info = 0;
+
+	ret = csio_hw_sf1_write(hw, 1, 1, 0, SF_RD_ID);
+	if (!ret)
+		ret = csio_hw_sf1_read(hw, 3, 0, 1, &info);
+	csio_wr_reg32(hw, 0, SF_OP);    /* unlock SF */
+	if (ret != 0)
+		return ret;
+
+	if ((info & 0xff) != 0x20)		/* not a Numonix flash */
+		return -EINVAL;
+	info >>= 16;				/* log2 of size */
+	if (info >= 0x14 && info < 0x18)
+		hw->params.sf_nsec = 1 << (info - 16);
+	else if (info == 0x18)
+		hw->params.sf_nsec = 64;
+	else
+		return -EINVAL;
+	hw->params.sf_size = 1 << info;
+
+	return 0;
+}
+
+static void
+csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
+{
+	uint16_t val;
+	uint32_t pcie_cap;
+
+	if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) {
+		pci_read_config_word(hw->pdev,
+				     pcie_cap + PCI_EXP_DEVCTL2, &val);
+		val &= 0xfff0;
+		val |= range ;
+		pci_write_config_word(hw->pdev,
+				      pcie_cap + PCI_EXP_DEVCTL2, val);
+	}
+}
+
+
+/*
+ * Return the specified PCI-E Configuration Space register from our Physical
+ * Function.  We try first via a Firmware LDST Command since we prefer to let
+ * the firmware own all of these registers, but if that fails we go for it
+ * directly ourselves.
+ */
+static uint32_t
+csio_read_pcie_cfg4(struct csio_hw *hw, int reg)
+{
+	u32 val = 0;
+	struct csio_mb *mbp;
+	int rv;
+	struct fw_ldst_cmd *ldst_cmd;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		pci_read_config_dword(hw->pdev, reg, &val);
+		return val;
+	}
+
+	csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg);
+
+	rv = csio_mb_issue(hw, mbp);
+
+	/*
+	 * If the LDST Command suucceeded, exctract the returned register
+	 * value.  Otherwise read it directly ourself.
+	 */
+	if (rv == 0) {
+		ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);
+		val = ntohl(ldst_cmd->u.pcie.data[0]);
+	} else
+		pci_read_config_dword(hw->pdev, reg, &val);
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return val;
+} /* csio_read_pcie_cfg4 */
+
+static int
+csio_hw_set_mem_win(struct csio_hw *hw)
+{
+	u32 bar0;
+
+	/*
+	 * Truncation intentional: we only read the bottom 32-bits of the
+	 * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
+	 * read BAR0 instead of using pci_resource_start() because we could be
+	 * operating from within a Virtual Machine which is trapping our
+	 * accesses to our Configuration Space and we need to set up the PCI-E
+	 * Memory Window decoders with the actual addresses which will be
+	 * coming across the PCI-E link.
+	 */
+	bar0 = csio_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);
+	bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	/*
+	 * Set up memory window for accessing adapter memory ranges.  (Read
+	 * back MA register to ensure that changes propagate before we attempt
+	 * to use the new values.)
+	 */
+	csio_wr_reg32(hw, (bar0 + MEMWIN0_BASE) | BIR(0) |
+		WINDOW(ilog2(MEMWIN0_APERTURE) - 10),
+		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0));
+	csio_wr_reg32(hw, (bar0 + MEMWIN1_BASE) | BIR(0) |
+		WINDOW(ilog2(MEMWIN1_APERTURE) - 10),
+		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1));
+	csio_wr_reg32(hw, (bar0 + MEMWIN2_BASE) | BIR(0) |
+		WINDOW(ilog2(MEMWIN2_APERTURE) - 10),
+		PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
+	csio_rd_reg32(hw, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
+	return 0;
+} /* csio_hw_set_mem_win */
+
+
+
+/*****************************************************************************/
+/* HW State machine assists                                                  */
+/*****************************************************************************/
+
+static int
+csio_hw_dev_ready(struct csio_hw *hw)
+{
+	uint32_t reg;
+	int cnt = 6;
+
+	while (((reg = csio_rd_reg32(hw, PL_WHOAMI)) == 0xFFFFFFFF) &&
+								(--cnt != 0))
+		mdelay(100);
+
+	if ((cnt == 0) && (((int32_t)(SOURCEPF_GET(reg)) < 0) ||
+			    (SOURCEPF_GET(reg) >= CSIO_MAX_PFN))) {
+		csio_err(hw, "PL_WHOAMI returned 0x%x, cnt:%d\n", reg, cnt);
+		return -EIO;
+	}
+
+	hw->pfn = SOURCEPF_GET(reg);
+
+	return 0;
+}
+
+/*
+ * csio_do_hello - Perform the HELLO FW Mailbox command and process response.
+ * @hw: HW module
+ * @state: Device state
+ *
+ * FW_HELLO_CMD has to be polled for completion.
+ */
+static int
+csio_do_hello(struct csio_hw *hw, enum csio_dev_state *state)
+{
+	struct csio_mb	*mbp;
+	int	rv = 0;
+	enum csio_dev_master master;
+	enum fw_retval retval;
+	uint8_t mpfn;
+	char state_str[16];
+	int retries = FW_CMD_HELLO_RETRIES;
+
+	memset(state_str, 0, sizeof(state_str));
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		rv = -ENOMEM;
+		CSIO_INC_STATS(hw, n_err_nomem);
+		goto out;
+	}
+
+	master = csio_force_master ? CSIO_MASTER_MUST : CSIO_MASTER_MAY;
+
+retry:
+	csio_mb_hello(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn,
+		      hw->pfn, master, NULL);
+
+	rv = csio_mb_issue(hw, mbp);
+	if (rv) {
+		csio_err(hw, "failed to issue HELLO cmd. ret:%d.\n", rv);
+		goto out_free_mb;
+	}
+
+	csio_mb_process_hello_rsp(hw, mbp, &retval, state, &mpfn);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "HELLO cmd failed with ret: %d\n", retval);
+		rv = -EINVAL;
+		goto out_free_mb;
+	}
+
+	/* Firmware has designated us to be master */
+	if (hw->pfn == mpfn) {
+		hw->flags |= CSIO_HWF_MASTER;
+	} else if (*state == CSIO_DEV_STATE_UNINIT) {
+		/*
+		 * If we're not the Master PF then we need to wait around for
+		 * the Master PF Driver to finish setting up the adapter.
+		 *
+		 * Note that we also do this wait if we're a non-Master-capable
+		 * PF and there is no current Master PF; a Master PF may show up
+		 * momentarily and we wouldn't want to fail pointlessly.  (This
+		 * can happen when an OS loads lots of different drivers rapidly
+		 * at the same time). In this case, the Master PF returned by
+		 * the firmware will be PCIE_FW_MASTER_MASK so the test below
+		 * will work ...
+		 */
+
+		int waiting = FW_CMD_HELLO_TIMEOUT;
+
+		/*
+		 * Wait for the firmware to either indicate an error or
+		 * initialized state.  If we see either of these we bail out
+		 * and report the issue to the caller.  If we exhaust the
+		 * "hello timeout" and we haven't exhausted our retries, try
+		 * again.  Otherwise bail with a timeout error.
+		 */
+		for (;;) {
+			uint32_t pcie_fw;
+
+			msleep(50);
+			waiting -= 50;
+
+			/*
+			 * If neither Error nor Initialialized are indicated
+			 * by the firmware keep waiting till we exaust our
+			 * timeout ... and then retry if we haven't exhausted
+			 * our retries ...
+			 */
+			pcie_fw = csio_rd_reg32(hw, PCIE_FW);
+			if (!(pcie_fw & (PCIE_FW_ERR|PCIE_FW_INIT))) {
+				if (waiting <= 0) {
+					if (retries-- > 0)
+						goto retry;
+
+					rv = -ETIMEDOUT;
+					break;
+				}
+				continue;
+			}
+
+			/*
+			 * We either have an Error or Initialized condition
+			 * report errors preferentially.
+			 */
+			if (state) {
+				if (pcie_fw & PCIE_FW_ERR) {
+					*state = CSIO_DEV_STATE_ERR;
+					rv = -ETIMEDOUT;
+				} else if (pcie_fw & PCIE_FW_INIT)
+					*state = CSIO_DEV_STATE_INIT;
+			}
+
+			/*
+			 * If we arrived before a Master PF was selected and
+			 * there's not a valid Master PF, grab its identity
+			 * for our caller.
+			 */
+			if (mpfn == PCIE_FW_MASTER_MASK &&
+			    (pcie_fw & PCIE_FW_MASTER_VLD))
+				mpfn = PCIE_FW_MASTER_GET(pcie_fw);
+			break;
+		}
+		hw->flags &= ~CSIO_HWF_MASTER;
+	}
+
+	switch (*state) {
+	case CSIO_DEV_STATE_UNINIT:
+		strcpy(state_str, "Initializing");
+		break;
+	case CSIO_DEV_STATE_INIT:
+		strcpy(state_str, "Initialized");
+		break;
+	case CSIO_DEV_STATE_ERR:
+		strcpy(state_str, "Error");
+		break;
+	default:
+		strcpy(state_str, "Unknown");
+		break;
+	}
+
+	if (hw->pfn == mpfn)
+		csio_info(hw, "PF: %d, Coming up as MASTER, HW state: %s\n",
+			hw->pfn, state_str);
+	else
+		csio_info(hw,
+		    "PF: %d, Coming up as SLAVE, Master PF: %d, HW state: %s\n",
+		    hw->pfn, mpfn, state_str);
+
+out_free_mb:
+	mempool_free(mbp, hw->mb_mempool);
+out:
+	return rv;
+}
+
+/*
+ * csio_do_bye - Perform the BYE FW Mailbox command and process response.
+ * @hw: HW module
+ *
+ */
+static int
+csio_do_bye(struct csio_hw *hw)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	csio_mb_bye(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of BYE command failed\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_do_reset- Perform the device reset.
+ * @hw: HW module
+ * @fw_rst: FW reset
+ *
+ * If fw_rst is set, issues FW reset mbox cmd otherwise
+ * does PIO reset.
+ * Performs reset of the function.
+ */
+static int
+csio_do_reset(struct csio_hw *hw, bool fw_rst)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+
+	if (!fw_rst) {
+		/* PIO reset */
+		csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST);
+		mdelay(2000);
+		return 0;
+	}
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO,
+		      PIORSTMODE | PIORST, 0, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of RESET command failed.n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "RESET cmd failed with ret:0x%x.\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+static int
+csio_hw_validate_caps(struct csio_hw *hw, struct csio_mb *mbp)
+{
+	struct fw_caps_config_cmd *rsp = (struct fw_caps_config_cmd *)mbp->mb;
+	uint16_t caps;
+
+	caps = ntohs(rsp->fcoecaps);
+
+	if (!(caps & FW_CAPS_CONFIG_FCOE_INITIATOR)) {
+		csio_err(hw, "No FCoE Initiator capability in the firmware.\n");
+		return -EINVAL;
+	}
+
+	if (!(caps & FW_CAPS_CONFIG_FCOE_CTRL_OFLD)) {
+		csio_err(hw, "No FCoE Control Offload capability\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ *	csio_hw_fw_halt - issue a reset/halt to FW and put uP into RESET
+ *	@hw: the HW module
+ *	@mbox: mailbox to use for the FW RESET command (if desired)
+ *	@force: force uP into RESET even if FW RESET command fails
+ *
+ *	Issues a RESET command to firmware (if desired) with a HALT indication
+ *	and then puts the microprocessor into RESET state.  The RESET command
+ *	will only be issued if a legitimate mailbox is provided (mbox <=
+ *	PCIE_FW_MASTER_MASK).
+ *
+ *	This is generally used in order for the host to safely manipulate the
+ *	adapter without fear of conflicting with whatever the firmware might
+ *	be doing.  The only way out of this state is to RESTART the firmware
+ *	...
+ */
+static int
+csio_hw_fw_halt(struct csio_hw *hw, uint32_t mbox, int32_t force)
+{
+	enum fw_retval retval = 0;
+
+	/*
+	 * If a legitimate mailbox is provided, issue a RESET command
+	 * with a HALT indication.
+	 */
+	if (mbox <= PCIE_FW_MASTER_MASK) {
+		struct csio_mb	*mbp;
+
+		mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+		if (!mbp) {
+			CSIO_INC_STATS(hw, n_err_nomem);
+			return -ENOMEM;
+		}
+
+		csio_mb_reset(hw, mbp, CSIO_MB_DEFAULT_TMO,
+			      PIORSTMODE | PIORST, FW_RESET_CMD_HALT(1),
+			      NULL);
+
+		if (csio_mb_issue(hw, mbp)) {
+			csio_err(hw, "Issue of RESET command failed!\n");
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+
+		retval = csio_mb_fw_retval(mbp);
+		mempool_free(mbp, hw->mb_mempool);
+	}
+
+	/*
+	 * Normally we won't complete the operation if the firmware RESET
+	 * command fails but if our caller insists we'll go ahead and put the
+	 * uP into RESET.  This can be useful if the firmware is hung or even
+	 * missing ...  We'll have to take the risk of putting the uP into
+	 * RESET without the cooperation of firmware in that case.
+	 *
+	 * We also force the firmware's HALT flag to be on in case we bypassed
+	 * the firmware RESET command above or we're dealing with old firmware
+	 * which doesn't have the HALT capability.  This will serve as a flag
+	 * for the incoming firmware to know that it's coming out of a HALT
+	 * rather than a RESET ... if it's new enough to understand that ...
+	 */
+	if (retval == 0 || force) {
+		csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, UPCRST);
+		csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, PCIE_FW_HALT);
+	}
+
+	/*
+	 * And we always return the result of the firmware RESET command
+	 * even when we force the uP into RESET ...
+	 */
+	return retval ? -EINVAL : 0;
+}
+
+/*
+ *	csio_hw_fw_restart - restart the firmware by taking the uP out of RESET
+ *	@hw: the HW module
+ *	@reset: if we want to do a RESET to restart things
+ *
+ *	Restart firmware previously halted by csio_hw_fw_halt().  On successful
+ *	return the previous PF Master remains as the new PF Master and there
+ *	is no need to issue a new HELLO command, etc.
+ *
+ *	We do this in two ways:
+ *
+ *	 1. If we're dealing with newer firmware we'll simply want to take
+ *	    the chip's microprocessor out of RESET.  This will cause the
+ *	    firmware to start up from its start vector.  And then we'll loop
+ *	    until the firmware indicates it's started again (PCIE_FW.HALT
+ *	    reset to 0) or we timeout.
+ *
+ *	 2. If we're dealing with older firmware then we'll need to RESET
+ *	    the chip since older firmware won't recognize the PCIE_FW.HALT
+ *	    flag and automatically RESET itself on startup.
+ */
+static int
+csio_hw_fw_restart(struct csio_hw *hw, uint32_t mbox, int32_t reset)
+{
+	if (reset) {
+		/*
+		 * Since we're directing the RESET instead of the firmware
+		 * doing it automatically, we need to clear the PCIE_FW.HALT
+		 * bit.
+		 */
+		csio_set_reg_field(hw, PCIE_FW, PCIE_FW_HALT, 0);
+
+		/*
+		 * If we've been given a valid mailbox, first try to get the
+		 * firmware to do the RESET.  If that works, great and we can
+		 * return success.  Otherwise, if we haven't been given a
+		 * valid mailbox or the RESET command failed, fall back to
+		 * hitting the chip with a hammer.
+		 */
+		if (mbox <= PCIE_FW_MASTER_MASK) {
+			csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0);
+			msleep(100);
+			if (csio_do_reset(hw, true) == 0)
+				return 0;
+		}
+
+		csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST);
+		msleep(2000);
+	} else {
+		int ms;
+
+		csio_set_reg_field(hw, CIM_BOOT_CFG, UPCRST, 0);
+		for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
+			if (!(csio_rd_reg32(hw, PCIE_FW) & PCIE_FW_HALT))
+				return 0;
+			msleep(100);
+			ms += 100;
+		}
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/*
+ *	csio_hw_fw_upgrade - perform all of the steps necessary to upgrade FW
+ *	@hw: the HW module
+ *	@mbox: mailbox to use for the FW RESET command (if desired)
+ *	@fw_data: the firmware image to write
+ *	@size: image size
+ *	@force: force upgrade even if firmware doesn't cooperate
+ *
+ *	Perform all of the steps necessary for upgrading an adapter's
+ *	firmware image.  Normally this requires the cooperation of the
+ *	existing firmware in order to halt all existing activities
+ *	but if an invalid mailbox token is passed in we skip that step
+ *	(though we'll still put the adapter microprocessor into RESET in
+ *	that case).
+ *
+ *	On successful return the new firmware will have been loaded and
+ *	the adapter will have been fully RESET losing all previous setup
+ *	state.  On unsuccessful return the adapter may be completely hosed ...
+ *	positive errno indicates that the adapter is ~probably~ intact, a
+ *	negative errno indicates that things are looking bad ...
+ */
+static int
+csio_hw_fw_upgrade(struct csio_hw *hw, uint32_t mbox,
+		  const u8 *fw_data, uint32_t size, int32_t force)
+{
+	const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
+	int reset, ret;
+
+	ret = csio_hw_fw_halt(hw, mbox, force);
+	if (ret != 0 && !force)
+		return ret;
+
+	ret = csio_hw_fw_dload(hw, (uint8_t *) fw_data, size);
+	if (ret != 0)
+		return ret;
+
+	/*
+	 * Older versions of the firmware don't understand the new
+	 * PCIE_FW.HALT flag and so won't know to perform a RESET when they
+	 * restart.  So for newly loaded older firmware we'll have to do the
+	 * RESET for it so it starts up on a clean slate.  We can tell if
+	 * the newly loaded firmware will handle this right by checking
+	 * its header flags to see if it advertises the capability.
+	 */
+	reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
+	return csio_hw_fw_restart(hw, mbox, reset);
+}
+
+
+/*
+ *	csio_hw_fw_config_file - setup an adapter via a Configuration File
+ *	@hw: the HW module
+ *	@mbox: mailbox to use for the FW command
+ *	@mtype: the memory type where the Configuration File is located
+ *	@maddr: the memory address where the Configuration File is located
+ *	@finiver: return value for CF [fini] version
+ *	@finicsum: return value for CF [fini] checksum
+ *	@cfcsum: return value for CF computed checksum
+ *
+ *	Issue a command to get the firmware to process the Configuration
+ *	File located at the specified mtype/maddress.  If the Configuration
+ *	File is processed successfully and return value pointers are
+ *	provided, the Configuration File "[fini] section version and
+ *	checksum values will be returned along with the computed checksum.
+ *	It's up to the caller to decide how it wants to respond to the
+ *	checksums not matching but it recommended that a prominant warning
+ *	be emitted in order to help people rapidly identify changed or
+ *	corrupted Configuration Files.
+ *
+ *	Also note that it's possible to modify things like "niccaps",
+ *	"toecaps",etc. between processing the Configuration File and telling
+ *	the firmware to use the new configuration.  Callers which want to
+ *	do this will need to "hand-roll" their own CAPS_CONFIGS commands for
+ *	Configuration Files if they want to do this.
+ */
+static int
+csio_hw_fw_config_file(struct csio_hw *hw,
+		      unsigned int mtype, unsigned int maddr,
+		      uint32_t *finiver, uint32_t *finicsum, uint32_t *cfcsum)
+{
+	struct csio_mb	*mbp;
+	struct fw_caps_config_cmd *caps_cmd;
+	int rv = -EINVAL;
+	enum fw_retval ret;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+	/*
+	 * Tell the firmware to process the indicated Configuration File.
+	 * If there are no errors and the caller has provided return value
+	 * pointers for the [fini] section version, checksum and computed
+	 * checksum, pass those back to the caller.
+	 */
+	caps_cmd = (struct fw_caps_config_cmd *)(mbp->mb);
+	CSIO_INIT_MBP(mbp, caps_cmd, CSIO_MB_DEFAULT_TMO, hw, NULL, 1);
+	caps_cmd->op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_READ);
+	caps_cmd->cfvalid_to_len16 =
+		htonl(FW_CAPS_CONFIG_CMD_CFVALID |
+		      FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
+		      FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
+		      FW_LEN16(*caps_cmd));
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
+		goto out;
+	}
+
+	ret = csio_mb_fw_retval(mbp);
+	if (ret != FW_SUCCESS) {
+		csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
+		goto out;
+	}
+
+	if (finiver)
+		*finiver = ntohl(caps_cmd->finiver);
+	if (finicsum)
+		*finicsum = ntohl(caps_cmd->finicsum);
+	if (cfcsum)
+		*cfcsum = ntohl(caps_cmd->cfcsum);
+
+	/* Validate device capabilities */
+	if (csio_hw_validate_caps(hw, mbp)) {
+		rv = -ENOENT;
+		goto out;
+	}
+
+	/*
+	 * And now tell the firmware to use the configuration we just loaded.
+	 */
+	caps_cmd->op_to_write =
+		htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+		      FW_CMD_REQUEST |
+		      FW_CMD_WRITE);
+	caps_cmd->cfvalid_to_len16 = htonl(FW_LEN16(*caps_cmd));
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD failed!\n");
+		goto out;
+	}
+
+	ret = csio_mb_fw_retval(mbp);
+	if (ret != FW_SUCCESS) {
+		csio_dbg(hw, "FW_CAPS_CONFIG_CMD returned %d!\n", rv);
+		goto out;
+	}
+
+	rv = 0;
+out:
+	mempool_free(mbp, hw->mb_mempool);
+	return rv;
+}
+
+/*
+ * csio_get_device_params - Get device parameters.
+ * @hw: HW module
+ *
+ */
+static int
+csio_get_device_params(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm	= csio_hw_to_wrm(hw);
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+	u32 param[6];
+	int i, j = 0;
+
+	/* Initialize portids to -1 */
+	for (i = 0; i < CSIO_MAX_PPORTS; i++)
+		hw->pport[i].portid = -1;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Get port vec information. */
+	param[0] = FW_PARAM_DEV(PORTVEC);
+
+	/* Get Core clock. */
+	param[1] = FW_PARAM_DEV(CCLK);
+
+	/* Get EQ id start and end. */
+	param[2] = FW_PARAM_PFVF(EQ_START);
+	param[3] = FW_PARAM_PFVF(EQ_END);
+
+	/* Get IQ id start and end. */
+	param[4] = FW_PARAM_PFVF(IQFLINT_START);
+	param[5] = FW_PARAM_PFVF(IQFLINT_END);
+
+	csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0,
+		       ARRAY_SIZE(param), param, NULL, false, NULL);
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	csio_mb_process_read_params_rsp(hw, mbp, &retval,
+			ARRAY_SIZE(param), param);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n",
+				retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	/* cache the information. */
+	hw->port_vec = param[0];
+	hw->vpd.cclk = param[1];
+	wrm->fw_eq_start = param[2];
+	wrm->fw_iq_start = param[4];
+
+	/* Using FW configured max iqs & eqs */
+	if ((hw->flags & CSIO_HWF_USING_SOFT_PARAMS) ||
+		!csio_is_hw_master(hw)) {
+		hw->cfg_niq = param[5] - param[4] + 1;
+		hw->cfg_neq = param[3] - param[2] + 1;
+		csio_dbg(hw, "Using fwconfig max niqs %d neqs %d\n",
+			hw->cfg_niq, hw->cfg_neq);
+	}
+
+	hw->port_vec &= csio_port_mask;
+
+	hw->num_pports	= hweight32(hw->port_vec);
+
+	csio_dbg(hw, "Port vector: 0x%x, #ports: %d\n",
+		    hw->port_vec, hw->num_pports);
+
+	for (i = 0; i < hw->num_pports; i++) {
+		while ((hw->port_vec & (1 << j)) == 0)
+			j++;
+		hw->pport[i].portid = j++;
+		csio_dbg(hw, "Found Port:%d\n", hw->pport[i].portid);
+	}
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+
+/*
+ * csio_config_device_caps - Get and set device capabilities.
+ * @hw: HW module
+ *
+ */
+static int
+csio_config_device_caps(struct csio_hw *hw)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+	int rv = -EINVAL;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Get device capabilities */
+	csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, 0, 0, 0, 0, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(r) failed!\n");
+		goto out;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_CAPS_CONFIG_CMD(r) returned %d!\n", retval);
+		goto out;
+	}
+
+	/* Validate device capabilities */
+	if (csio_hw_validate_caps(hw, mbp))
+		goto out;
+
+	/* Don't config device capabilities if already configured */
+	if (hw->fw_state == CSIO_DEV_STATE_INIT) {
+		rv = 0;
+		goto out;
+	}
+
+	/* Write back desired device capabilities */
+	csio_mb_caps_config(hw, mbp, CSIO_MB_DEFAULT_TMO, true, true,
+			    false, true, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_CAPS_CONFIG_CMD(w) failed!\n");
+		goto out;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_CAPS_CONFIG_CMD(w) returned %d!\n", retval);
+		goto out;
+	}
+
+	rv = 0;
+out:
+	mempool_free(mbp, hw->mb_mempool);
+	return rv;
+}
+
+static int
+csio_config_global_rss(struct csio_hw *hw)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	csio_rss_glb_config(hw, mbp, CSIO_MB_DEFAULT_TMO,
+			    FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
+			    FW_RSS_GLB_CONFIG_CMD_TNLMAPEN |
+			    FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ |
+			    FW_RSS_GLB_CONFIG_CMD_TNLALLLKP,
+			    NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_RSS_GLB_CONFIG_CMD failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_RSS_GLB_CONFIG_CMD returned 0x%x!\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_config_pfvf - Configure Physical/Virtual functions settings.
+ * @hw: HW module
+ *
+ */
+static int
+csio_config_pfvf(struct csio_hw *hw)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/*
+	 * For now, allow all PFs to access to all ports using a pmask
+	 * value of 0xF (M_FW_PFVF_CMD_PMASK). Once we have VFs, we will
+	 * need to provide access based on some rule.
+	 */
+	csio_mb_pfvf(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0, CSIO_NEQ,
+		     CSIO_NETH_CTRL, CSIO_NIQ_FLINT, 0, 0, CSIO_NVI, CSIO_CMASK,
+		     CSIO_PMASK, CSIO_NEXACTF, CSIO_R_CAPS, CSIO_WX_CAPS, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_PFVF_CMD failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_PFVF_CMD returned 0x%x!\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_enable_ports - Bring up all available ports.
+ * @hw: HW module.
+ *
+ */
+static int
+csio_enable_ports(struct csio_hw *hw)
+{
+	struct csio_mb  *mbp;
+	enum fw_retval retval;
+	uint8_t portid;
+	int i;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < hw->num_pports; i++) {
+		portid = hw->pport[i].portid;
+
+		/* Read PORT information */
+		csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid,
+			     false, 0, 0, NULL);
+
+		if (csio_mb_issue(hw, mbp)) {
+			csio_err(hw, "failed to issue FW_PORT_CMD(r) port:%d\n",
+				 portid);
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+
+		csio_mb_process_read_port_rsp(hw, mbp, &retval,
+					      &hw->pport[i].pcap);
+		if (retval != FW_SUCCESS) {
+			csio_err(hw, "FW_PORT_CMD(r) port:%d failed: 0x%x\n",
+				 portid, retval);
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+
+		/* Write back PORT information */
+		csio_mb_port(hw, mbp, CSIO_MB_DEFAULT_TMO, portid, true,
+			     (PAUSE_RX | PAUSE_TX), hw->pport[i].pcap, NULL);
+
+		if (csio_mb_issue(hw, mbp)) {
+			csio_err(hw, "failed to issue FW_PORT_CMD(w) port:%d\n",
+				 portid);
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+
+		retval = csio_mb_fw_retval(mbp);
+		if (retval != FW_SUCCESS) {
+			csio_err(hw, "FW_PORT_CMD(w) port:%d failed :0x%x\n",
+				 portid, retval);
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+
+	} /* For all ports */
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_get_fcoe_resinfo - Read fcoe fw resource info.
+ * @hw: HW module
+ * Issued with lock held.
+ */
+static int
+csio_get_fcoe_resinfo(struct csio_hw *hw)
+{
+	struct csio_fcoe_res_info *res_info = &hw->fres_info;
+	struct fw_fcoe_res_info_cmd *rsp;
+	struct csio_mb  *mbp;
+	enum fw_retval retval;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Get FCoE FW resource information */
+	csio_fcoe_read_res_info_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "failed to issue FW_FCOE_RES_INFO_CMD\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	rsp = (struct fw_fcoe_res_info_cmd *)(mbp->mb);
+	retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16));
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_FCOE_RES_INFO_CMD failed with ret x%x\n",
+			 retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	res_info->e_d_tov = ntohs(rsp->e_d_tov);
+	res_info->r_a_tov_seq = ntohs(rsp->r_a_tov_seq);
+	res_info->r_a_tov_els = ntohs(rsp->r_a_tov_els);
+	res_info->r_r_tov = ntohs(rsp->r_r_tov);
+	res_info->max_xchgs = ntohl(rsp->max_xchgs);
+	res_info->max_ssns = ntohl(rsp->max_ssns);
+	res_info->used_xchgs = ntohl(rsp->used_xchgs);
+	res_info->used_ssns = ntohl(rsp->used_ssns);
+	res_info->max_fcfs = ntohl(rsp->max_fcfs);
+	res_info->max_vnps = ntohl(rsp->max_vnps);
+	res_info->used_fcfs = ntohl(rsp->used_fcfs);
+	res_info->used_vnps = ntohl(rsp->used_vnps);
+
+	csio_dbg(hw, "max ssns:%d max xchgs:%d\n", res_info->max_ssns,
+						  res_info->max_xchgs);
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+static int
+csio_hw_check_fwconfig(struct csio_hw *hw, u32 *param)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+	u32 _param[1];
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Find out whether we're dealing with a version of
+	 * the firmware which has configuration file support.
+	 */
+	_param[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+		     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
+
+	csio_mb_params(hw, mbp, CSIO_MB_DEFAULT_TMO, hw->pfn, 0,
+		       ARRAY_SIZE(_param), _param, NULL, false, NULL);
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of FW_PARAMS_CMD(read) failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	csio_mb_process_read_params_rsp(hw, mbp, &retval,
+			ARRAY_SIZE(_param), _param);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FW_PARAMS_CMD(read) failed with ret:0x%x!\n",
+				retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+	*param = _param[0];
+
+	return 0;
+}
+
+static int
+csio_hw_flash_config(struct csio_hw *hw, u32 *fw_cfg_param, char *path)
+{
+	int ret = 0;
+	const struct firmware *cf;
+	struct pci_dev *pci_dev = hw->pdev;
+	struct device *dev = &pci_dev->dev;
+	unsigned int mtype = 0, maddr = 0;
+	uint32_t *cfg_data;
+	int value_to_add = 0;
+
+	if (request_firmware(&cf, CSIO_CF_FNAME, dev) < 0) {
+		csio_err(hw, "could not find config file " CSIO_CF_FNAME
+			 ",err: %d\n", ret);
+		return -ENOENT;
+	}
+
+	if (cf->size%4 != 0)
+		value_to_add = 4 - (cf->size % 4);
+
+	cfg_data = kzalloc(cf->size+value_to_add, GFP_KERNEL);
+	if (cfg_data == NULL)
+		return -ENOMEM;
+
+	memcpy((void *)cfg_data, (const void *)cf->data, cf->size);
+
+	if (csio_hw_check_fwconfig(hw, fw_cfg_param) != 0)
+		return -EINVAL;
+
+	mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param);
+	maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16;
+
+	ret = csio_memory_write(hw, mtype, maddr,
+				cf->size + value_to_add, cfg_data);
+	if (ret == 0) {
+		csio_info(hw, "config file upgraded to " CSIO_CF_FNAME "\n");
+		strncpy(path, "/lib/firmware/" CSIO_CF_FNAME, 64);
+	}
+
+	kfree(cfg_data);
+	release_firmware(cf);
+
+	return ret;
+}
+
+/*
+ * HW initialization: contact FW, obtain config, perform basic init.
+ *
+ * If the firmware we're dealing with has Configuration File support, then
+ * we use that to perform all configuration -- either using the configuration
+ * file stored in flash on the adapter or using a filesystem-local file
+ * if available.
+ *
+ * If we don't have configuration file support in the firmware, then we'll
+ * have to set things up the old fashioned way with hard-coded register
+ * writes and firmware commands ...
+ */
+
+/*
+ * Attempt to initialize the HW via a Firmware Configuration File.
+ */
+static int
+csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
+{
+	unsigned int mtype, maddr;
+	int rv;
+	uint32_t finiver, finicsum, cfcsum;
+	int using_flash;
+	char path[64];
+
+	/*
+	 * Reset device if necessary
+	 */
+	if (reset) {
+		rv = csio_do_reset(hw, true);
+		if (rv != 0)
+			goto bye;
+	}
+
+	/*
+	 * If we have a configuration file in host ,
+	 * then use that.  Otherwise, use the configuration file stored
+	 * in the HW flash ...
+	 */
+	spin_unlock_irq(&hw->lock);
+	rv = csio_hw_flash_config(hw, fw_cfg_param, path);
+	spin_lock_irq(&hw->lock);
+	if (rv != 0) {
+		if (rv == -ENOENT) {
+			/*
+			 * config file was not found. Use default
+			 * config file from flash.
+			 */
+			mtype = FW_MEMTYPE_CF_FLASH;
+			maddr = csio_hw_flash_cfg_addr(hw);
+			using_flash = 1;
+		} else {
+			/*
+			 * we revert back to the hardwired config if
+			 * flashing failed.
+			 */
+			goto bye;
+		}
+	} else {
+		mtype = FW_PARAMS_PARAM_Y_GET(*fw_cfg_param);
+		maddr = FW_PARAMS_PARAM_Z_GET(*fw_cfg_param) << 16;
+		using_flash = 0;
+	}
+
+	hw->cfg_store = (uint8_t)mtype;
+
+	/*
+	 * Issue a Capability Configuration command to the firmware to get it
+	 * to parse the Configuration File.
+	 */
+	rv = csio_hw_fw_config_file(hw, mtype, maddr, &finiver,
+		&finicsum, &cfcsum);
+	if (rv != 0)
+		goto bye;
+
+	hw->cfg_finiver		= finiver;
+	hw->cfg_finicsum	= finicsum;
+	hw->cfg_cfcsum		= cfcsum;
+	hw->cfg_csum_status	= true;
+
+	if (finicsum != cfcsum) {
+		csio_warn(hw,
+		      "Config File checksum mismatch: csum=%#x, computed=%#x\n",
+		      finicsum, cfcsum);
+
+		hw->cfg_csum_status = false;
+	}
+
+	/*
+	 * Note that we're operating with parameters
+	 * not supplied by the driver, rather than from hard-wired
+	 * initialization constants buried in the driver.
+	 */
+	hw->flags |= CSIO_HWF_USING_SOFT_PARAMS;
+
+	/* device parameters */
+	rv = csio_get_device_params(hw);
+	if (rv != 0)
+		goto bye;
+
+	/* Configure SGE */
+	csio_wr_sge_init(hw);
+
+	/*
+	 * And finally tell the firmware to initialize itself using the
+	 * parameters from the Configuration File.
+	 */
+	/* Post event to notify completion of configuration */
+	csio_post_event(&hw->sm, CSIO_HWE_INIT);
+
+	csio_info(hw,
+	 "Firmware Configuration File %s, version %#x, computed checksum %#x\n",
+		  (using_flash ? "in device FLASH" : path), finiver, cfcsum);
+
+	return 0;
+
+	/*
+	 * Something bad happened.  Return the error ...
+	 */
+bye:
+	hw->flags &= ~CSIO_HWF_USING_SOFT_PARAMS;
+	csio_dbg(hw, "Configuration file error %d\n", rv);
+	return rv;
+}
+
+/*
+ * Attempt to initialize the adapter via hard-coded, driver supplied
+ * parameters ...
+ */
+static int
+csio_hw_no_fwconfig(struct csio_hw *hw, int reset)
+{
+	int		rv;
+	/*
+	 * Reset device if necessary
+	 */
+	if (reset) {
+		rv = csio_do_reset(hw, true);
+		if (rv != 0)
+			goto out;
+	}
+
+	/* Get and set device capabilities */
+	rv = csio_config_device_caps(hw);
+	if (rv != 0)
+		goto out;
+
+	/* Config Global RSS command */
+	rv = csio_config_global_rss(hw);
+	if (rv != 0)
+		goto out;
+
+	/* Configure PF/VF capabilities of device */
+	rv = csio_config_pfvf(hw);
+	if (rv != 0)
+		goto out;
+
+	/* device parameters */
+	rv = csio_get_device_params(hw);
+	if (rv != 0)
+		goto out;
+
+	/* Configure SGE */
+	csio_wr_sge_init(hw);
+
+	/* Post event to notify completion of configuration */
+	csio_post_event(&hw->sm, CSIO_HWE_INIT);
+
+out:
+	return rv;
+}
+
+/*
+ * Returns -EINVAL if attempts to flash the firmware failed
+ * else returns 0,
+ * if flashing was not attempted because the card had the
+ * latest firmware ECANCELED is returned
+ */
+static int
+csio_hw_flash_fw(struct csio_hw *hw)
+{
+	int ret = -ECANCELED;
+	const struct firmware *fw;
+	const struct fw_hdr *hdr;
+	u32 fw_ver;
+	struct pci_dev *pci_dev = hw->pdev;
+	struct device *dev = &pci_dev->dev ;
+
+	if (request_firmware(&fw, CSIO_FW_FNAME, dev) < 0) {
+		csio_err(hw, "could not find firmware image " CSIO_FW_FNAME
+		",err: %d\n", ret);
+		return -EINVAL;
+	}
+
+	hdr = (const struct fw_hdr *)fw->data;
+	fw_ver = ntohl(hdr->fw_ver);
+	if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR)
+		return -EINVAL;      /* wrong major version, won't do */
+
+	/*
+	 * If the flash FW is unusable or we found something newer, load it.
+	 */
+	if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR ||
+	    fw_ver > hw->fwrev) {
+		ret = csio_hw_fw_upgrade(hw, hw->pfn, fw->data, fw->size,
+				    /*force=*/false);
+		if (!ret)
+			csio_info(hw, "firmware upgraded to version %pI4 from "
+				  CSIO_FW_FNAME "\n", &hdr->fw_ver);
+		else
+			csio_err(hw, "firmware upgrade failed! err=%d\n", ret);
+	}
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+
+/*
+ * csio_hw_configure - Configure HW
+ * @hw - HW module
+ *
+ */
+static void
+csio_hw_configure(struct csio_hw *hw)
+{
+	int reset = 1;
+	int rv;
+	u32 param[1];
+
+	rv = csio_hw_dev_ready(hw);
+	if (rv != 0) {
+		CSIO_INC_STATS(hw, n_err_fatal);
+		csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+		goto out;
+	}
+
+	/* HW version */
+	hw->chip_ver = (char)csio_rd_reg32(hw, PL_REV);
+
+	/* Needed for FW download */
+	rv = csio_hw_get_flash_params(hw);
+	if (rv != 0) {
+		csio_err(hw, "Failed to get serial flash params rv:%d\n", rv);
+		csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+		goto out;
+	}
+
+	/* Set pci completion timeout value to 4 seconds. */
+	csio_set_pcie_completion_timeout(hw, 0xd);
+
+	csio_hw_set_mem_win(hw);
+
+	rv = csio_hw_get_fw_version(hw, &hw->fwrev);
+	if (rv != 0)
+		goto out;
+
+	csio_hw_print_fw_version(hw, "Firmware revision");
+
+	rv = csio_do_hello(hw, &hw->fw_state);
+	if (rv != 0) {
+		CSIO_INC_STATS(hw, n_err_fatal);
+		csio_post_event(&hw->sm, CSIO_HWE_FATAL);
+		goto out;
+	}
+
+	/* Read vpd */
+	rv = csio_hw_get_vpd_params(hw, &hw->vpd);
+	if (rv != 0)
+		goto out;
+
+	if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+		rv = csio_hw_check_fw_version(hw);
+		if (rv == -EINVAL) {
+
+			/* Do firmware update */
+			spin_unlock_irq(&hw->lock);
+			rv = csio_hw_flash_fw(hw);
+			spin_lock_irq(&hw->lock);
+
+			if (rv == 0) {
+				reset = 0;
+				/*
+				 * Note that the chip was reset as part of the
+				 * firmware upgrade so we don't reset it again
+				 * below and grab the new firmware version.
+				 */
+				rv = csio_hw_check_fw_version(hw);
+			}
+		}
+		/*
+		 * If the firmware doesn't support Configuration
+		 * Files, use the old Driver-based, hard-wired
+		 * initialization.  Otherwise, try using the
+		 * Configuration File support and fall back to the
+		 * Driver-based initialization if there's no
+		 * Configuration File found.
+		 */
+		if (csio_hw_check_fwconfig(hw, param) == 0) {
+			rv = csio_hw_use_fwconfig(hw, reset, param);
+			if (rv == -ENOENT)
+				goto out;
+			if (rv != 0) {
+				csio_info(hw,
+				    "No Configuration File present "
+				    "on adapter.  Using hard-wired "
+				    "configuration parameters.\n");
+				rv = csio_hw_no_fwconfig(hw, reset);
+			}
+		} else {
+			rv = csio_hw_no_fwconfig(hw, reset);
+		}
+
+		if (rv != 0)
+			goto out;
+
+	} else {
+		if (hw->fw_state == CSIO_DEV_STATE_INIT) {
+
+			/* device parameters */
+			rv = csio_get_device_params(hw);
+			if (rv != 0)
+				goto out;
+
+			/* Get device capabilities */
+			rv = csio_config_device_caps(hw);
+			if (rv != 0)
+				goto out;
+
+			/* Configure SGE */
+			csio_wr_sge_init(hw);
+
+			/* Post event to notify completion of configuration */
+			csio_post_event(&hw->sm, CSIO_HWE_INIT);
+			goto out;
+		}
+	} /* if not master */
+
+out:
+	return;
+}
+
+/*
+ * csio_hw_initialize - Initialize HW
+ * @hw - HW module
+ *
+ */
+static void
+csio_hw_initialize(struct csio_hw *hw)
+{
+	struct csio_mb	*mbp;
+	enum fw_retval retval;
+	int rv;
+	int i;
+
+	if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+		mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+		if (!mbp)
+			goto out;
+
+		csio_mb_initialize(hw, mbp, CSIO_MB_DEFAULT_TMO, NULL);
+
+		if (csio_mb_issue(hw, mbp)) {
+			csio_err(hw, "Issue of FW_INITIALIZE_CMD failed!\n");
+			goto free_and_out;
+		}
+
+		retval = csio_mb_fw_retval(mbp);
+		if (retval != FW_SUCCESS) {
+			csio_err(hw, "FW_INITIALIZE_CMD returned 0x%x!\n",
+				 retval);
+			goto free_and_out;
+		}
+
+		mempool_free(mbp, hw->mb_mempool);
+	}
+
+	rv = csio_get_fcoe_resinfo(hw);
+	if (rv != 0) {
+		csio_err(hw, "Failed to read fcoe resource info: %d\n", rv);
+		goto out;
+	}
+
+	spin_unlock_irq(&hw->lock);
+	rv = csio_config_queues(hw);
+	spin_lock_irq(&hw->lock);
+
+	if (rv != 0) {
+		csio_err(hw, "Config of queues failed!: %d\n", rv);
+		goto out;
+	}
+
+	for (i = 0; i < hw->num_pports; i++)
+		hw->pport[i].mod_type = FW_PORT_MOD_TYPE_NA;
+
+	if (csio_is_hw_master(hw) && hw->fw_state != CSIO_DEV_STATE_INIT) {
+		rv = csio_enable_ports(hw);
+		if (rv != 0) {
+			csio_err(hw, "Failed to enable ports: %d\n", rv);
+			goto out;
+		}
+	}
+
+	csio_post_event(&hw->sm, CSIO_HWE_INIT_DONE);
+	return;
+
+free_and_out:
+	mempool_free(mbp, hw->mb_mempool);
+out:
+	return;
+}
+
+#define PF_INTR_MASK (PFSW | PFCIM)
+
+/*
+ * csio_hw_intr_enable - Enable HW interrupts
+ * @hw: Pointer to HW module.
+ *
+ * Enable interrupts in HW registers.
+ */
+static void
+csio_hw_intr_enable(struct csio_hw *hw)
+{
+	uint16_t vec = (uint16_t)csio_get_mb_intr_idx(csio_hw_to_mbm(hw));
+	uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI));
+	uint32_t pl = csio_rd_reg32(hw, PL_INT_ENABLE);
+
+	/*
+	 * Set aivec for MSI/MSIX. PCIE_PF_CFG.INTXType is set up
+	 * by FW, so do nothing for INTX.
+	 */
+	if (hw->intr_mode == CSIO_IM_MSIX)
+		csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG),
+				   AIVEC(AIVEC_MASK), vec);
+	else if (hw->intr_mode == CSIO_IM_MSI)
+		csio_set_reg_field(hw, MYPF_REG(PCIE_PF_CFG),
+				   AIVEC(AIVEC_MASK), 0);
+
+	csio_wr_reg32(hw, PF_INTR_MASK, MYPF_REG(PL_PF_INT_ENABLE));
+
+	/* Turn on MB interrupts - this will internally flush PIO as well */
+	csio_mb_intr_enable(hw);
+
+	/* These are common registers - only a master can modify them */
+	if (csio_is_hw_master(hw)) {
+		/*
+		 * Disable the Serial FLASH interrupt, if enabled!
+		 */
+		pl &= (~SF);
+		csio_wr_reg32(hw, pl, PL_INT_ENABLE);
+
+		csio_wr_reg32(hw, ERR_CPL_EXCEED_IQE_SIZE |
+			      EGRESS_SIZE_ERR | ERR_INVALID_CIDX_INC |
+			      ERR_CPL_OPCODE_0 | ERR_DROPPED_DB |
+			      ERR_DATA_CPL_ON_HIGH_QID1 |
+			      ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 |
+			      ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 |
+			      ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO |
+			      ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR,
+			      SGE_INT_ENABLE3);
+		csio_set_reg_field(hw, PL_INT_MAP0, 0, 1 << pf);
+	}
+
+	hw->flags |= CSIO_HWF_HW_INTR_ENABLED;
+
+}
+
+/*
+ * csio_hw_intr_disable - Disable HW interrupts
+ * @hw: Pointer to HW module.
+ *
+ * Turn off Mailbox and PCI_PF_CFG interrupts.
+ */
+void
+csio_hw_intr_disable(struct csio_hw *hw)
+{
+	uint32_t pf = SOURCEPF_GET(csio_rd_reg32(hw, PL_WHOAMI));
+
+	if (!(hw->flags & CSIO_HWF_HW_INTR_ENABLED))
+		return;
+
+	hw->flags &= ~CSIO_HWF_HW_INTR_ENABLED;
+
+	csio_wr_reg32(hw, 0, MYPF_REG(PL_PF_INT_ENABLE));
+	if (csio_is_hw_master(hw))
+		csio_set_reg_field(hw, PL_INT_MAP0, 1 << pf, 0);
+
+	/* Turn off MB interrupts */
+	csio_mb_intr_disable(hw);
+
+}
+
+static void
+csio_hw_fatal_err(struct csio_hw *hw)
+{
+	csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0);
+	csio_hw_intr_disable(hw);
+
+	/* Do not reset HW, we may need FW state for debugging */
+	csio_fatal(hw, "HW Fatal error encountered!\n");
+}
+
+/*****************************************************************************/
+/* START: HW SM                                                              */
+/*****************************************************************************/
+/*
+ * csio_hws_uninit - Uninit state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_uninit(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_CFG:
+		csio_set_state(&hw->sm, csio_hws_configuring);
+		csio_hw_configure(hw);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_configuring - Configuring state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_configuring(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_INIT:
+		csio_set_state(&hw->sm, csio_hws_initializing);
+		csio_hw_initialize(hw);
+		break;
+
+	case CSIO_HWE_INIT_DONE:
+		csio_set_state(&hw->sm, csio_hws_ready);
+		/* Fan out event to all lnode SMs */
+		csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY);
+		break;
+
+	case CSIO_HWE_FATAL:
+		csio_set_state(&hw->sm, csio_hws_uninit);
+		break;
+
+	case CSIO_HWE_PCI_REMOVE:
+		csio_do_bye(hw);
+		break;
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_initializing - Initialiazing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_initializing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_INIT_DONE:
+		csio_set_state(&hw->sm, csio_hws_ready);
+
+		/* Fan out event to all lnode SMs */
+		csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREADY);
+
+		/* Enable interrupts */
+		csio_hw_intr_enable(hw);
+		break;
+
+	case CSIO_HWE_FATAL:
+		csio_set_state(&hw->sm, csio_hws_uninit);
+		break;
+
+	case CSIO_HWE_PCI_REMOVE:
+		csio_do_bye(hw);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_ready - Ready state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_ready(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	/* Remember the event */
+	hw->evtflag = evt;
+
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_HBA_RESET:
+	case CSIO_HWE_FW_DLOAD:
+	case CSIO_HWE_SUSPEND:
+	case CSIO_HWE_PCI_REMOVE:
+	case CSIO_HWE_PCIERR_DETECTED:
+		csio_set_state(&hw->sm, csio_hws_quiescing);
+		/* cleanup all outstanding cmds */
+		if (evt == CSIO_HWE_HBA_RESET ||
+		    evt == CSIO_HWE_PCIERR_DETECTED)
+			csio_scsim_cleanup_io(csio_hw_to_scsim(hw), false);
+		else
+			csio_scsim_cleanup_io(csio_hw_to_scsim(hw), true);
+
+		csio_hw_intr_disable(hw);
+		csio_hw_mbm_cleanup(hw);
+		csio_evtq_stop(hw);
+		csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWSTOP);
+		csio_evtq_flush(hw);
+		csio_mgmtm_cleanup(csio_hw_to_mgmtm(hw));
+		csio_post_event(&hw->sm, CSIO_HWE_QUIESCED);
+		break;
+
+	case CSIO_HWE_FATAL:
+		csio_set_state(&hw->sm, csio_hws_uninit);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_quiescing - Quiescing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_quiescing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_QUIESCED:
+		switch (hw->evtflag) {
+		case CSIO_HWE_FW_DLOAD:
+			csio_set_state(&hw->sm, csio_hws_resetting);
+			/* Download firmware */
+			/* Fall through */
+
+		case CSIO_HWE_HBA_RESET:
+			csio_set_state(&hw->sm, csio_hws_resetting);
+			/* Start reset of the HBA */
+			csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWRESET);
+			csio_wr_destroy_queues(hw, false);
+			csio_do_reset(hw, false);
+			csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET_DONE);
+			break;
+
+		case CSIO_HWE_PCI_REMOVE:
+			csio_set_state(&hw->sm, csio_hws_removing);
+			csio_notify_lnodes(hw, CSIO_LN_NOTIFY_HWREMOVE);
+			csio_wr_destroy_queues(hw, true);
+			/* Now send the bye command */
+			csio_do_bye(hw);
+			break;
+
+		case CSIO_HWE_SUSPEND:
+			csio_set_state(&hw->sm, csio_hws_quiesced);
+			break;
+
+		case CSIO_HWE_PCIERR_DETECTED:
+			csio_set_state(&hw->sm, csio_hws_pcierr);
+			csio_wr_destroy_queues(hw, false);
+			break;
+
+		default:
+			CSIO_INC_STATS(hw, n_evt_unexp);
+			break;
+
+		}
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_quiesced - Quiesced state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_quiesced(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_RESUME:
+		csio_set_state(&hw->sm, csio_hws_configuring);
+		csio_hw_configure(hw);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_resetting - HW Resetting state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_resetting(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_HBA_RESET_DONE:
+		csio_evtq_start(hw);
+		csio_set_state(&hw->sm, csio_hws_configuring);
+		csio_hw_configure(hw);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_hws_removing - PCI Hotplug removing state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_removing(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_HBA_RESET:
+		if (!csio_is_hw_master(hw))
+			break;
+		/*
+		 * The BYE should have alerady been issued, so we cant
+		 * use the mailbox interface. Hence we use the PL_RST
+		 * register directly.
+		 */
+		csio_err(hw, "Resetting HW and waiting 2 seconds...\n");
+		csio_wr_reg32(hw, PIORSTMODE | PIORST, PL_RST);
+		mdelay(2000);
+		break;
+
+	/* Should never receive any new events */
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+
+	}
+}
+
+/*
+ * csio_hws_pcierr - PCI Error state
+ * @hw - HW module
+ * @evt - Event
+ *
+ */
+static void
+csio_hws_pcierr(struct csio_hw *hw, enum csio_hw_ev evt)
+{
+	hw->prev_evt = hw->cur_evt;
+	hw->cur_evt = evt;
+	CSIO_INC_STATS(hw, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_HWE_PCIERR_SLOT_RESET:
+		csio_evtq_start(hw);
+		csio_set_state(&hw->sm, csio_hws_configuring);
+		csio_hw_configure(hw);
+		break;
+
+	default:
+		CSIO_INC_STATS(hw, n_evt_unexp);
+		break;
+	}
+}
+
+/*****************************************************************************/
+/* END: HW SM                                                                */
+/*****************************************************************************/
+
+/* Slow path handlers */
+struct intr_info {
+	unsigned int mask;       /* bits to check in interrupt status */
+	const char *msg;         /* message to print or NULL */
+	short stat_idx;          /* stat counter to increment or -1 */
+	unsigned short fatal;    /* whether the condition reported is fatal */
+};
+
+/*
+ *	csio_handle_intr_status - table driven interrupt handler
+ *	@hw: HW instance
+ *	@reg: the interrupt status register to process
+ *	@acts: table of interrupt actions
+ *
+ *	A table driven interrupt handler that applies a set of masks to an
+ *	interrupt status word and performs the corresponding actions if the
+ *	interrupts described by the mask have occured.  The actions include
+ *	optionally emitting a warning or alert message. The table is terminated
+ *	by an entry specifying mask 0.  Returns the number of fatal interrupt
+ *	conditions.
+ */
+static int
+csio_handle_intr_status(struct csio_hw *hw, unsigned int reg,
+				 const struct intr_info *acts)
+{
+	int fatal = 0;
+	unsigned int mask = 0;
+	unsigned int status = csio_rd_reg32(hw, reg);
+
+	for ( ; acts->mask; ++acts) {
+		if (!(status & acts->mask))
+			continue;
+		if (acts->fatal) {
+			fatal++;
+			csio_fatal(hw, "Fatal %s (0x%x)\n",
+				    acts->msg, status & acts->mask);
+		} else if (acts->msg)
+			csio_info(hw, "%s (0x%x)\n",
+				    acts->msg, status & acts->mask);
+		mask |= acts->mask;
+	}
+	status &= mask;
+	if (status)                           /* clear processed interrupts */
+		csio_wr_reg32(hw, status, reg);
+	return fatal;
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void
+csio_pcie_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info sysbus_intr_info[] = {
+		{ RNPP, "RXNP array parity error", -1, 1 },
+		{ RPCP, "RXPC array parity error", -1, 1 },
+		{ RCIP, "RXCIF array parity error", -1, 1 },
+		{ RCCP, "Rx completions control array parity error", -1, 1 },
+		{ RFTP, "RXFT array parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info pcie_port_intr_info[] = {
+		{ TPCP, "TXPC array parity error", -1, 1 },
+		{ TNPP, "TXNP array parity error", -1, 1 },
+		{ TFTP, "TXFT array parity error", -1, 1 },
+		{ TCAP, "TXCA array parity error", -1, 1 },
+		{ TCIP, "TXCIF array parity error", -1, 1 },
+		{ RCAP, "RXCA array parity error", -1, 1 },
+		{ OTDD, "outbound request TLP discarded", -1, 1 },
+		{ RDPE, "Rx data parity error", -1, 1 },
+		{ TDUE, "Tx uncorrectable data error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info pcie_intr_info[] = {
+		{ MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
+		{ MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
+		{ MSIDATAPERR, "MSI data parity error", -1, 1 },
+		{ MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
+		{ MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
+		{ MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
+		{ MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
+		{ PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
+		{ PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
+		{ TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
+		{ CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
+		{ CREQPERR, "PCI CMD channel request parity error", -1, 1 },
+		{ CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
+		{ DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
+		{ DREQPERR, "PCI DMA channel request parity error", -1, 1 },
+		{ DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
+		{ HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
+		{ HREQPERR, "PCI HMA channel request parity error", -1, 1 },
+		{ HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
+		{ CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
+		{ FIDPERR, "PCI FID parity error", -1, 1 },
+		{ INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
+		{ MATAGPERR, "PCI MA tag parity error", -1, 1 },
+		{ PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
+		{ RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
+		{ RXWRPERR, "PCI Rx write parity error", -1, 1 },
+		{ RPLPERR, "PCI replay buffer parity error", -1, 1 },
+		{ PCIESINT, "PCI core secondary fault", -1, 1 },
+		{ PCIEPINT, "PCI core primary fault", -1, 1 },
+		{ UNXSPLCPLERR, "PCI unexpected split completion error", -1,
+		  0 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	int fat;
+
+	fat = csio_handle_intr_status(hw,
+				    PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
+				    sysbus_intr_info) +
+	      csio_handle_intr_status(hw,
+				    PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
+				    pcie_port_intr_info) +
+	      csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info);
+	if (fat)
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * TP interrupt handler.
+ */
+static void csio_tp_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info tp_intr_info[] = {
+		{ 0x3fffffff, "TP parity error", -1, 1 },
+		{ FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, TP_INT_CAUSE, tp_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * SGE interrupt handler.
+ */
+static void csio_sge_intr_handler(struct csio_hw *hw)
+{
+	uint64_t v;
+
+	static struct intr_info sge_intr_info[] = {
+		{ ERR_CPL_EXCEED_IQE_SIZE,
+		  "SGE received CPL exceeding IQE size", -1, 1 },
+		{ ERR_INVALID_CIDX_INC,
+		  "SGE GTS CIDX increment too large", -1, 0 },
+		{ ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 },
+		{ ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 },
+		{ ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0,
+		  "SGE IQID > 1023 received CPL for FL", -1, 0 },
+		{ ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1,
+		  0 },
+		{ ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1,
+		  0 },
+		{ ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1,
+		  0 },
+		{ ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1,
+		  0 },
+		{ ERR_ING_CTXT_PRIO,
+		  "SGE too many priority ingress contexts", -1, 0 },
+		{ ERR_EGR_CTXT_PRIO,
+		  "SGE too many priority egress contexts", -1, 0 },
+		{ INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 },
+		{ EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	v = (uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE1) |
+	    ((uint64_t)csio_rd_reg32(hw, SGE_INT_CAUSE2) << 32);
+	if (v) {
+		csio_fatal(hw, "SGE parity error (%#llx)\n",
+			    (unsigned long long)v);
+		csio_wr_reg32(hw, (uint32_t)(v & 0xFFFFFFFF),
+						SGE_INT_CAUSE1);
+		csio_wr_reg32(hw, (uint32_t)(v >> 32), SGE_INT_CAUSE2);
+	}
+
+	v |= csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info);
+
+	if (csio_handle_intr_status(hw, SGE_INT_CAUSE3, sge_intr_info) ||
+	    v != 0)
+		csio_hw_fatal_err(hw);
+}
+
+#define CIM_OBQ_INTR (OBQULP0PARERR | OBQULP1PARERR | OBQULP2PARERR |\
+		      OBQULP3PARERR | OBQSGEPARERR | OBQNCSIPARERR)
+#define CIM_IBQ_INTR (IBQTP0PARERR | IBQTP1PARERR | IBQULPPARERR |\
+		      IBQSGEHIPARERR | IBQSGELOPARERR | IBQNCSIPARERR)
+
+/*
+ * CIM interrupt handler.
+ */
+static void csio_cim_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info cim_intr_info[] = {
+		{ PREFDROPINT, "CIM control register prefetch drop", -1, 1 },
+		{ CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 },
+		{ CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 },
+		{ MBUPPARERR, "CIM mailbox uP parity error", -1, 1 },
+		{ MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 },
+		{ TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 },
+		{ TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info cim_upintr_info[] = {
+		{ RSVDSPACEINT, "CIM reserved space access", -1, 1 },
+		{ ILLTRANSINT, "CIM illegal transaction", -1, 1 },
+		{ ILLWRINT, "CIM illegal write", -1, 1 },
+		{ ILLRDINT, "CIM illegal read", -1, 1 },
+		{ ILLRDBEINT, "CIM illegal read BE", -1, 1 },
+		{ ILLWRBEINT, "CIM illegal write BE", -1, 1 },
+		{ SGLRDBOOTINT, "CIM single read from boot space", -1, 1 },
+		{ SGLWRBOOTINT, "CIM single write to boot space", -1, 1 },
+		{ BLKWRBOOTINT, "CIM block write to boot space", -1, 1 },
+		{ SGLRDFLASHINT, "CIM single read from flash space", -1, 1 },
+		{ SGLWRFLASHINT, "CIM single write to flash space", -1, 1 },
+		{ BLKWRFLASHINT, "CIM block write to flash space", -1, 1 },
+		{ SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 },
+		{ SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 },
+		{ BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 },
+		{ BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 },
+		{ SGLRDCTLINT , "CIM single read from CTL space", -1, 1 },
+		{ SGLWRCTLINT , "CIM single write to CTL space", -1, 1 },
+		{ BLKRDCTLINT , "CIM block read from CTL space", -1, 1 },
+		{ BLKWRCTLINT , "CIM block write to CTL space", -1, 1 },
+		{ SGLRDPLINT , "CIM single read from PL space", -1, 1 },
+		{ SGLWRPLINT , "CIM single write to PL space", -1, 1 },
+		{ BLKRDPLINT , "CIM block read from PL space", -1, 1 },
+		{ BLKWRPLINT , "CIM block write to PL space", -1, 1 },
+		{ REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 },
+		{ RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 },
+		{ TIMEOUTINT , "CIM PIF timeout", -1, 1 },
+		{ TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	int fat;
+
+	fat = csio_handle_intr_status(hw, CIM_HOST_INT_CAUSE,
+				    cim_intr_info) +
+	      csio_handle_intr_status(hw, CIM_HOST_UPACC_INT_CAUSE,
+				    cim_upintr_info);
+	if (fat)
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * ULP RX interrupt handler.
+ */
+static void csio_ulprx_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info ulprx_intr_info[] = {
+		{ 0x1800000, "ULPRX context error", -1, 1 },
+		{ 0x7fffff, "ULPRX parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, ULP_RX_INT_CAUSE, ulprx_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * ULP TX interrupt handler.
+ */
+static void csio_ulptx_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info ulptx_intr_info[] = {
+		{ PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1,
+		  0 },
+		{ PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1,
+		  0 },
+		{ PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1,
+		  0 },
+		{ PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1,
+		  0 },
+		{ 0xfffffff, "ULPTX parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, ULP_TX_INT_CAUSE, ulptx_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * PM TX interrupt handler.
+ */
+static void csio_pmtx_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info pmtx_intr_info[] = {
+		{ PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 },
+		{ PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 },
+		{ PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 },
+		{ ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 },
+		{ 0xffffff0, "PMTX framing error", -1, 1 },
+		{ OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 },
+		{ DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1,
+		  1 },
+		{ ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 },
+		{ C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1},
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, PM_TX_INT_CAUSE, pmtx_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * PM RX interrupt handler.
+ */
+static void csio_pmrx_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info pmrx_intr_info[] = {
+		{ ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 },
+		{ 0x3ffff0, "PMRX framing error", -1, 1 },
+		{ OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 },
+		{ DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1,
+		  1 },
+		{ IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 },
+		{ E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1},
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, PM_RX_INT_CAUSE, pmrx_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * CPL switch interrupt handler.
+ */
+static void csio_cplsw_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info cplsw_intr_info[] = {
+		{ CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 },
+		{ CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 },
+		{ TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 },
+		{ SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 },
+		{ CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 },
+		{ ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, CPL_INTR_CAUSE, cplsw_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * LE interrupt handler.
+ */
+static void csio_le_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info le_intr_info[] = {
+		{ LIPMISS, "LE LIP miss", -1, 0 },
+		{ LIP0, "LE 0 LIP error", -1, 0 },
+		{ PARITYERR, "LE parity error", -1, 1 },
+		{ UNKNOWNCMD, "LE unknown command", -1, 1 },
+		{ REQQPARERR, "LE request queue parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, LE_DB_INT_CAUSE, le_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * MPS interrupt handler.
+ */
+static void csio_mps_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info mps_rx_intr_info[] = {
+		{ 0xffffff, "MPS Rx parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_tx_intr_info[] = {
+		{ TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 },
+		{ NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 },
+		{ TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 },
+		{ TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 },
+		{ BUBBLE, "MPS Tx underflow", -1, 1 },
+		{ SECNTERR, "MPS Tx SOP/EOP error", -1, 1 },
+		{ FRMERR, "MPS Tx framing error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_trc_intr_info[] = {
+		{ FILTMEM, "MPS TRC filter parity error", -1, 1 },
+		{ PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 },
+		{ MISCPERR, "MPS TRC misc parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_stat_sram_intr_info[] = {
+		{ 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_stat_tx_intr_info[] = {
+		{ 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_stat_rx_intr_info[] = {
+		{ 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info mps_cls_intr_info[] = {
+		{ MATCHSRAM, "MPS match SRAM parity error", -1, 1 },
+		{ MATCHTCAM, "MPS match TCAM parity error", -1, 1 },
+		{ HASHSRAM, "MPS hash SRAM parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	int fat;
+
+	fat = csio_handle_intr_status(hw, MPS_RX_PERR_INT_CAUSE,
+				    mps_rx_intr_info) +
+	      csio_handle_intr_status(hw, MPS_TX_INT_CAUSE,
+				    mps_tx_intr_info) +
+	      csio_handle_intr_status(hw, MPS_TRC_INT_CAUSE,
+				    mps_trc_intr_info) +
+	      csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_SRAM,
+				    mps_stat_sram_intr_info) +
+	      csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_TX_FIFO,
+				    mps_stat_tx_intr_info) +
+	      csio_handle_intr_status(hw, MPS_STAT_PERR_INT_CAUSE_RX_FIFO,
+				    mps_stat_rx_intr_info) +
+	      csio_handle_intr_status(hw, MPS_CLS_INT_CAUSE,
+				    mps_cls_intr_info);
+
+	csio_wr_reg32(hw, 0, MPS_INT_CAUSE);
+	csio_rd_reg32(hw, MPS_INT_CAUSE);                    /* flush */
+	if (fat)
+		csio_hw_fatal_err(hw);
+}
+
+#define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE)
+
+/*
+ * EDC/MC interrupt handler.
+ */
+static void csio_mem_intr_handler(struct csio_hw *hw, int idx)
+{
+	static const char name[3][5] = { "EDC0", "EDC1", "MC" };
+
+	unsigned int addr, cnt_addr, v;
+
+	if (idx <= MEM_EDC1) {
+		addr = EDC_REG(EDC_INT_CAUSE, idx);
+		cnt_addr = EDC_REG(EDC_ECC_STATUS, idx);
+	} else {
+		addr = MC_INT_CAUSE;
+		cnt_addr = MC_ECC_STATUS;
+	}
+
+	v = csio_rd_reg32(hw, addr) & MEM_INT_MASK;
+	if (v & PERR_INT_CAUSE)
+		csio_fatal(hw, "%s FIFO parity error\n", name[idx]);
+	if (v & ECC_CE_INT_CAUSE) {
+		uint32_t cnt = ECC_CECNT_GET(csio_rd_reg32(hw, cnt_addr));
+
+		csio_wr_reg32(hw, ECC_CECNT_MASK, cnt_addr);
+		csio_warn(hw, "%u %s correctable ECC data error%s\n",
+			    cnt, name[idx], cnt > 1 ? "s" : "");
+	}
+	if (v & ECC_UE_INT_CAUSE)
+		csio_fatal(hw, "%s uncorrectable ECC data error\n", name[idx]);
+
+	csio_wr_reg32(hw, v, addr);
+	if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * MA interrupt handler.
+ */
+static void csio_ma_intr_handler(struct csio_hw *hw)
+{
+	uint32_t v, status = csio_rd_reg32(hw, MA_INT_CAUSE);
+
+	if (status & MEM_PERR_INT_CAUSE)
+		csio_fatal(hw, "MA parity error, parity status %#x\n",
+			    csio_rd_reg32(hw, MA_PARITY_ERROR_STATUS));
+	if (status & MEM_WRAP_INT_CAUSE) {
+		v = csio_rd_reg32(hw, MA_INT_WRAP_STATUS);
+		csio_fatal(hw,
+		   "MA address wrap-around error by client %u to address %#x\n",
+		   MEM_WRAP_CLIENT_NUM_GET(v), MEM_WRAP_ADDRESS_GET(v) << 4);
+	}
+	csio_wr_reg32(hw, status, MA_INT_CAUSE);
+	csio_hw_fatal_err(hw);
+}
+
+/*
+ * SMB interrupt handler.
+ */
+static void csio_smb_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info smb_intr_info[] = {
+		{ MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 },
+		{ MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 },
+		{ SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, SMB_INT_CAUSE, smb_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * NC-SI interrupt handler.
+ */
+static void csio_ncsi_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info ncsi_intr_info[] = {
+		{ CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 },
+		{ MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 },
+		{ TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 },
+		{ RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, NCSI_INT_CAUSE, ncsi_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * XGMAC interrupt handler.
+ */
+static void csio_xgmac_intr_handler(struct csio_hw *hw, int port)
+{
+	uint32_t v = csio_rd_reg32(hw, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+
+	v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR;
+	if (!v)
+		return;
+
+	if (v & TXFIFO_PRTY_ERR)
+		csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port);
+	if (v & RXFIFO_PRTY_ERR)
+		csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port);
+	csio_wr_reg32(hw, v, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+	csio_hw_fatal_err(hw);
+}
+
+/*
+ * PL interrupt handler.
+ */
+static void csio_pl_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info pl_intr_info[] = {
+		{ FATALPERR, "T4 fatal parity error", -1, 1 },
+		{ PERRVFID, "PL VFID_MAP parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	if (csio_handle_intr_status(hw, PL_PL_INT_CAUSE, pl_intr_info))
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ *	csio_hw_slow_intr_handler - control path interrupt handler
+ *	@hw: HW module
+ *
+ *	Interrupt handler for non-data global interrupt events, e.g., errors.
+ *	The designation 'slow' is because it involves register reads, while
+ *	data interrupts typically don't involve any MMIOs.
+ */
+int
+csio_hw_slow_intr_handler(struct csio_hw *hw)
+{
+	uint32_t cause = csio_rd_reg32(hw, PL_INT_CAUSE);
+
+	if (!(cause & CSIO_GLBL_INTR_MASK)) {
+		CSIO_INC_STATS(hw, n_plint_unexp);
+		return 0;
+	}
+
+	csio_dbg(hw, "Slow interrupt! cause: 0x%x\n", cause);
+
+	CSIO_INC_STATS(hw, n_plint_cnt);
+
+	if (cause & CIM)
+		csio_cim_intr_handler(hw);
+
+	if (cause & MPS)
+		csio_mps_intr_handler(hw);
+
+	if (cause & NCSI)
+		csio_ncsi_intr_handler(hw);
+
+	if (cause & PL)
+		csio_pl_intr_handler(hw);
+
+	if (cause & SMB)
+		csio_smb_intr_handler(hw);
+
+	if (cause & XGMAC0)
+		csio_xgmac_intr_handler(hw, 0);
+
+	if (cause & XGMAC1)
+		csio_xgmac_intr_handler(hw, 1);
+
+	if (cause & XGMAC_KR0)
+		csio_xgmac_intr_handler(hw, 2);
+
+	if (cause & XGMAC_KR1)
+		csio_xgmac_intr_handler(hw, 3);
+
+	if (cause & PCIE)
+		csio_pcie_intr_handler(hw);
+
+	if (cause & MC)
+		csio_mem_intr_handler(hw, MEM_MC);
+
+	if (cause & EDC0)
+		csio_mem_intr_handler(hw, MEM_EDC0);
+
+	if (cause & EDC1)
+		csio_mem_intr_handler(hw, MEM_EDC1);
+
+	if (cause & LE)
+		csio_le_intr_handler(hw);
+
+	if (cause & TP)
+		csio_tp_intr_handler(hw);
+
+	if (cause & MA)
+		csio_ma_intr_handler(hw);
+
+	if (cause & PM_TX)
+		csio_pmtx_intr_handler(hw);
+
+	if (cause & PM_RX)
+		csio_pmrx_intr_handler(hw);
+
+	if (cause & ULP_RX)
+		csio_ulprx_intr_handler(hw);
+
+	if (cause & CPL_SWITCH)
+		csio_cplsw_intr_handler(hw);
+
+	if (cause & SGE)
+		csio_sge_intr_handler(hw);
+
+	if (cause & ULP_TX)
+		csio_ulptx_intr_handler(hw);
+
+	/* Clear the interrupts just processed for which we are the master. */
+	csio_wr_reg32(hw, cause & CSIO_GLBL_INTR_MASK, PL_INT_CAUSE);
+	csio_rd_reg32(hw, PL_INT_CAUSE); /* flush */
+
+	return 1;
+}
+
+/*****************************************************************************
+ * HW <--> mailbox interfacing routines.
+ ****************************************************************************/
+/*
+ * csio_mberr_worker - Worker thread (dpc) for mailbox/error completions
+ *
+ * @data: Private data pointer.
+ *
+ * Called from worker thread context.
+ */
+static void
+csio_mberr_worker(void *data)
+{
+	struct csio_hw *hw = (struct csio_hw *)data;
+	struct csio_mbm *mbm = &hw->mbm;
+	LIST_HEAD(cbfn_q);
+	struct csio_mb *mbp_next;
+	int rv;
+
+	del_timer_sync(&mbm->timer);
+
+	spin_lock_irq(&hw->lock);
+	if (list_empty(&mbm->cbfn_q)) {
+		spin_unlock_irq(&hw->lock);
+		return;
+	}
+
+	list_splice_tail_init(&mbm->cbfn_q, &cbfn_q);
+	mbm->stats.n_cbfnq = 0;
+
+	/* Try to start waiting mailboxes */
+	if (!list_empty(&mbm->req_q)) {
+		mbp_next = list_first_entry(&mbm->req_q, struct csio_mb, list);
+		list_del_init(&mbp_next->list);
+
+		rv = csio_mb_issue(hw, mbp_next);
+		if (rv != 0)
+			list_add_tail(&mbp_next->list, &mbm->req_q);
+		else
+			CSIO_DEC_STATS(mbm, n_activeq);
+	}
+	spin_unlock_irq(&hw->lock);
+
+	/* Now callback completions */
+	csio_mb_completions(hw, &cbfn_q);
+}
+
+/*
+ * csio_hw_mb_timer - Top-level Mailbox timeout handler.
+ *
+ * @data: private data pointer
+ *
+ **/
+static void
+csio_hw_mb_timer(uintptr_t data)
+{
+	struct csio_hw *hw = (struct csio_hw *)data;
+	struct csio_mb *mbp = NULL;
+
+	spin_lock_irq(&hw->lock);
+	mbp = csio_mb_tmo_handler(hw);
+	spin_unlock_irq(&hw->lock);
+
+	/* Call back the function for the timed-out Mailbox */
+	if (mbp)
+		mbp->mb_cbfn(hw, mbp);
+
+}
+
+/*
+ * csio_hw_mbm_cleanup - Cleanup Mailbox module.
+ * @hw: HW module
+ *
+ * Called with lock held, should exit with lock held.
+ * Cancels outstanding mailboxes (waiting, in-flight) and gathers them
+ * into a local queue. Drops lock and calls the completions. Holds
+ * lock and returns.
+ */
+static void
+csio_hw_mbm_cleanup(struct csio_hw *hw)
+{
+	LIST_HEAD(cbfn_q);
+
+	csio_mb_cancel_all(hw, &cbfn_q);
+
+	spin_unlock_irq(&hw->lock);
+	csio_mb_completions(hw, &cbfn_q);
+	spin_lock_irq(&hw->lock);
+}
+
+/*****************************************************************************
+ * Event handling
+ ****************************************************************************/
+int
+csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type, void *evt_msg,
+			uint16_t len)
+{
+	struct csio_evt_msg *evt_entry = NULL;
+
+	if (type >= CSIO_EVT_MAX)
+		return -EINVAL;
+
+	if (len > CSIO_EVT_MSG_SIZE)
+		return -EINVAL;
+
+	if (hw->flags & CSIO_HWF_FWEVT_STOP)
+		return -EINVAL;
+
+	if (list_empty(&hw->evt_free_q)) {
+		csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n",
+			 type, len);
+		return -ENOMEM;
+	}
+
+	evt_entry = list_first_entry(&hw->evt_free_q,
+				     struct csio_evt_msg, list);
+	list_del_init(&evt_entry->list);
+
+	/* copy event msg and queue the event */
+	evt_entry->type = type;
+	memcpy((void *)evt_entry->data, evt_msg, len);
+	list_add_tail(&evt_entry->list, &hw->evt_active_q);
+
+	CSIO_DEC_STATS(hw, n_evt_freeq);
+	CSIO_INC_STATS(hw, n_evt_activeq);
+
+	return 0;
+}
+
+static int
+csio_enqueue_evt_lock(struct csio_hw *hw, enum csio_evt type, void *evt_msg,
+			uint16_t len, bool msg_sg)
+{
+	struct csio_evt_msg *evt_entry = NULL;
+	struct csio_fl_dma_buf *fl_sg;
+	uint32_t off = 0;
+	unsigned long flags;
+	int n, ret = 0;
+
+	if (type >= CSIO_EVT_MAX)
+		return -EINVAL;
+
+	if (len > CSIO_EVT_MSG_SIZE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (hw->flags & CSIO_HWF_FWEVT_STOP) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (list_empty(&hw->evt_free_q)) {
+		csio_err(hw, "Failed to alloc evt entry, msg type %d len %d\n",
+			 type, len);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	evt_entry = list_first_entry(&hw->evt_free_q,
+				     struct csio_evt_msg, list);
+	list_del_init(&evt_entry->list);
+
+	/* copy event msg and queue the event */
+	evt_entry->type = type;
+
+	/* If Payload in SG list*/
+	if (msg_sg) {
+		fl_sg = (struct csio_fl_dma_buf *) evt_msg;
+		for (n = 0; (n < CSIO_MAX_FLBUF_PER_IQWR && off < len); n++) {
+			memcpy((void *)((uintptr_t)evt_entry->data + off),
+				fl_sg->flbufs[n].vaddr,
+				fl_sg->flbufs[n].len);
+			off += fl_sg->flbufs[n].len;
+		}
+	} else
+		memcpy((void *)evt_entry->data, evt_msg, len);
+
+	list_add_tail(&evt_entry->list, &hw->evt_active_q);
+	CSIO_DEC_STATS(hw, n_evt_freeq);
+	CSIO_INC_STATS(hw, n_evt_activeq);
+out:
+	spin_unlock_irqrestore(&hw->lock, flags);
+	return ret;
+}
+
+static void
+csio_free_evt(struct csio_hw *hw, struct csio_evt_msg *evt_entry)
+{
+	if (evt_entry) {
+		spin_lock_irq(&hw->lock);
+		list_del_init(&evt_entry->list);
+		list_add_tail(&evt_entry->list, &hw->evt_free_q);
+		CSIO_DEC_STATS(hw, n_evt_activeq);
+		CSIO_INC_STATS(hw, n_evt_freeq);
+		spin_unlock_irq(&hw->lock);
+	}
+}
+
+void
+csio_evtq_flush(struct csio_hw *hw)
+{
+	uint32_t count;
+	count = 30;
+	while (hw->flags & CSIO_HWF_FWEVT_PENDING && count--) {
+		spin_unlock_irq(&hw->lock);
+		msleep(2000);
+		spin_lock_irq(&hw->lock);
+	}
+
+	CSIO_DB_ASSERT(!(hw->flags & CSIO_HWF_FWEVT_PENDING));
+}
+
+static void
+csio_evtq_stop(struct csio_hw *hw)
+{
+	hw->flags |= CSIO_HWF_FWEVT_STOP;
+}
+
+static void
+csio_evtq_start(struct csio_hw *hw)
+{
+	hw->flags &= ~CSIO_HWF_FWEVT_STOP;
+}
+
+static void
+csio_evtq_cleanup(struct csio_hw *hw)
+{
+	struct list_head *evt_entry, *next_entry;
+
+	/* Release outstanding events from activeq to freeq*/
+	if (!list_empty(&hw->evt_active_q))
+		list_splice_tail_init(&hw->evt_active_q, &hw->evt_free_q);
+
+	hw->stats.n_evt_activeq = 0;
+	hw->flags &= ~CSIO_HWF_FWEVT_PENDING;
+
+	/* Freeup event entry */
+	list_for_each_safe(evt_entry, next_entry, &hw->evt_free_q) {
+		kfree(evt_entry);
+		CSIO_DEC_STATS(hw, n_evt_freeq);
+	}
+
+	hw->stats.n_evt_freeq = 0;
+}
+
+
+static void
+csio_process_fwevtq_entry(struct csio_hw *hw, void *wr, uint32_t len,
+			  struct csio_fl_dma_buf *flb, void *priv)
+{
+	__u8 op;
+	__be64 *data;
+	void *msg = NULL;
+	uint32_t msg_len = 0;
+	bool msg_sg = 0;
+
+	op = ((struct rss_header *) wr)->opcode;
+	if (op == CPL_FW6_PLD) {
+		CSIO_INC_STATS(hw, n_cpl_fw6_pld);
+		if (!flb || !flb->totlen) {
+			CSIO_INC_STATS(hw, n_cpl_unexp);
+			return;
+		}
+
+		msg = (void *) flb;
+		msg_len = flb->totlen;
+		msg_sg = 1;
+
+		data = (__be64 *) msg;
+	} else if (op == CPL_FW6_MSG || op == CPL_FW4_MSG) {
+
+		CSIO_INC_STATS(hw, n_cpl_fw6_msg);
+		/* skip RSS header */
+		msg = (void *)((uintptr_t)wr + sizeof(__be64));
+		msg_len = (op == CPL_FW6_MSG) ? sizeof(struct cpl_fw6_msg) :
+			   sizeof(struct cpl_fw4_msg);
+
+		data = (__be64 *) msg;
+	} else {
+		csio_warn(hw, "unexpected CPL %#x on FW event queue\n", op);
+		CSIO_INC_STATS(hw, n_cpl_unexp);
+		return;
+	}
+
+	/*
+	 * Enqueue event to EventQ. Events processing happens
+	 * in Event worker thread context
+	 */
+	if (csio_enqueue_evt_lock(hw, CSIO_EVT_FW, msg,
+				  (uint16_t)msg_len, msg_sg))
+		CSIO_INC_STATS(hw, n_evt_drop);
+}
+
+void
+csio_evtq_worker(struct work_struct *work)
+{
+	struct csio_hw *hw = container_of(work, struct csio_hw, evtq_work);
+	struct list_head *evt_entry, *next_entry;
+	LIST_HEAD(evt_q);
+	struct csio_evt_msg	*evt_msg;
+	struct cpl_fw6_msg *msg;
+	struct csio_rnode *rn;
+	int rv = 0;
+	uint8_t evtq_stop = 0;
+
+	csio_dbg(hw, "event worker thread active evts#%d\n",
+		 hw->stats.n_evt_activeq);
+
+	spin_lock_irq(&hw->lock);
+	while (!list_empty(&hw->evt_active_q)) {
+		list_splice_tail_init(&hw->evt_active_q, &evt_q);
+		spin_unlock_irq(&hw->lock);
+
+		list_for_each_safe(evt_entry, next_entry, &evt_q) {
+			evt_msg = (struct csio_evt_msg *) evt_entry;
+
+			/* Drop events if queue is STOPPED */
+			spin_lock_irq(&hw->lock);
+			if (hw->flags & CSIO_HWF_FWEVT_STOP)
+				evtq_stop = 1;
+			spin_unlock_irq(&hw->lock);
+			if (evtq_stop) {
+				CSIO_INC_STATS(hw, n_evt_drop);
+				goto free_evt;
+			}
+
+			switch (evt_msg->type) {
+			case CSIO_EVT_FW:
+				msg = (struct cpl_fw6_msg *)(evt_msg->data);
+
+				if ((msg->opcode == CPL_FW6_MSG ||
+				     msg->opcode == CPL_FW4_MSG) &&
+				    !msg->type) {
+					rv = csio_mb_fwevt_handler(hw,
+								msg->data);
+					if (!rv)
+						break;
+					/* Handle any remaining fw events */
+					csio_fcoe_fwevt_handler(hw,
+							msg->opcode, msg->data);
+				} else if (msg->opcode == CPL_FW6_PLD) {
+
+					csio_fcoe_fwevt_handler(hw,
+							msg->opcode, msg->data);
+				} else {
+					csio_warn(hw,
+					     "Unhandled FW msg op %x type %x\n",
+						  msg->opcode, msg->type);
+					CSIO_INC_STATS(hw, n_evt_drop);
+				}
+				break;
+
+			case CSIO_EVT_MBX:
+				csio_mberr_worker(hw);
+				break;
+
+			case CSIO_EVT_DEV_LOSS:
+				memcpy(&rn, evt_msg->data, sizeof(rn));
+				csio_rnode_devloss_handler(rn);
+				break;
+
+			default:
+				csio_warn(hw, "Unhandled event %x on evtq\n",
+					  evt_msg->type);
+				CSIO_INC_STATS(hw, n_evt_unexp);
+				break;
+			}
+free_evt:
+			csio_free_evt(hw, evt_msg);
+		}
+
+		spin_lock_irq(&hw->lock);
+	}
+	hw->flags &= ~CSIO_HWF_FWEVT_PENDING;
+	spin_unlock_irq(&hw->lock);
+}
+
+int
+csio_fwevtq_handler(struct csio_hw *hw)
+{
+	int rv;
+
+	if (csio_q_iqid(hw, hw->fwevt_iq_idx) == CSIO_MAX_QID) {
+		CSIO_INC_STATS(hw, n_int_stray);
+		return -EINVAL;
+	}
+
+	rv = csio_wr_process_iq_idx(hw, hw->fwevt_iq_idx,
+			   csio_process_fwevtq_entry, NULL);
+	return rv;
+}
+
+/****************************************************************************
+ * Entry points
+ ****************************************************************************/
+
+/* Management module */
+/*
+ * csio_mgmt_req_lookup - Lookup the given IO req exist in Active Q.
+ * mgmt - mgmt module
+ * @io_req - io request
+ *
+ * Return - 0:if given IO Req exists in active Q.
+ *          -EINVAL  :if lookup fails.
+ */
+int
+csio_mgmt_req_lookup(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req)
+{
+	struct list_head *tmp;
+
+	/* Lookup ioreq in the ACTIVEQ */
+	list_for_each(tmp, &mgmtm->active_q) {
+		if (io_req == (struct csio_ioreq *)tmp)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+#define	ECM_MIN_TMO	1000	/* Minimum timeout value for req */
+
+/*
+ * csio_mgmts_tmo_handler - MGMT IO Timeout handler.
+ * @data - Event data.
+ *
+ * Return - none.
+ */
+static void
+csio_mgmt_tmo_handler(uintptr_t data)
+{
+	struct csio_mgmtm *mgmtm = (struct csio_mgmtm *) data;
+	struct list_head *tmp;
+	struct csio_ioreq *io_req;
+
+	csio_dbg(mgmtm->hw, "Mgmt timer invoked!\n");
+
+	spin_lock_irq(&mgmtm->hw->lock);
+
+	list_for_each(tmp, &mgmtm->active_q) {
+		io_req = (struct csio_ioreq *) tmp;
+		io_req->tmo -= min_t(uint32_t, io_req->tmo, ECM_MIN_TMO);
+
+		if (!io_req->tmo) {
+			/* Dequeue the request from retry Q. */
+			tmp = csio_list_prev(tmp);
+			list_del_init(&io_req->sm.sm_list);
+			if (io_req->io_cbfn) {
+				/* io_req will be freed by completion handler */
+				io_req->wr_status = -ETIMEDOUT;
+				io_req->io_cbfn(mgmtm->hw, io_req);
+			} else {
+				CSIO_DB_ASSERT(0);
+			}
+		}
+	}
+
+	/* If retry queue is not empty, re-arm timer */
+	if (!list_empty(&mgmtm->active_q))
+		mod_timer(&mgmtm->mgmt_timer,
+			  jiffies + msecs_to_jiffies(ECM_MIN_TMO));
+	spin_unlock_irq(&mgmtm->hw->lock);
+}
+
+static void
+csio_mgmtm_cleanup(struct csio_mgmtm *mgmtm)
+{
+	struct csio_hw *hw = mgmtm->hw;
+	struct csio_ioreq *io_req;
+	struct list_head *tmp;
+	uint32_t count;
+
+	count = 30;
+	/* Wait for all outstanding req to complete gracefully */
+	while ((!list_empty(&mgmtm->active_q)) && count--) {
+		spin_unlock_irq(&hw->lock);
+		msleep(2000);
+		spin_lock_irq(&hw->lock);
+	}
+
+	/* release outstanding req from ACTIVEQ */
+	list_for_each(tmp, &mgmtm->active_q) {
+		io_req = (struct csio_ioreq *) tmp;
+		tmp = csio_list_prev(tmp);
+		list_del_init(&io_req->sm.sm_list);
+		mgmtm->stats.n_active--;
+		if (io_req->io_cbfn) {
+			/* io_req will be freed by completion handler */
+			io_req->wr_status = -ETIMEDOUT;
+			io_req->io_cbfn(mgmtm->hw, io_req);
+		}
+	}
+}
+
+/*
+ * csio_mgmt_init - Mgmt module init entry point
+ * @mgmtsm - mgmt module
+ * @hw	 - HW module
+ *
+ * Initialize mgmt timer, resource wait queue, active queue,
+ * completion q. Allocate Egress and Ingress
+ * WR queues and save off the queue index returned by the WR
+ * module for future use. Allocate and save off mgmt reqs in the
+ * mgmt_req_freelist for future use. Make sure their SM is initialized
+ * to uninit state.
+ * Returns: 0 - on success
+ *          -ENOMEM   - on error.
+ */
+static int
+csio_mgmtm_init(struct csio_mgmtm *mgmtm, struct csio_hw *hw)
+{
+	struct timer_list *timer = &mgmtm->mgmt_timer;
+
+	init_timer(timer);
+	timer->function = csio_mgmt_tmo_handler;
+	timer->data = (unsigned long)mgmtm;
+
+	INIT_LIST_HEAD(&mgmtm->active_q);
+	INIT_LIST_HEAD(&mgmtm->cbfn_q);
+
+	mgmtm->hw = hw;
+	/*mgmtm->iq_idx = hw->fwevt_iq_idx;*/
+
+	return 0;
+}
+
+/*
+ * csio_mgmtm_exit - MGMT module exit entry point
+ * @mgmtsm - mgmt module
+ *
+ * This function called during MGMT module uninit.
+ * Stop timers, free ioreqs allocated.
+ * Returns: None
+ *
+ */
+static void
+csio_mgmtm_exit(struct csio_mgmtm *mgmtm)
+{
+	del_timer_sync(&mgmtm->mgmt_timer);
+}
+
+
+/**
+ * csio_hw_start - Kicks off the HW State machine
+ * @hw:		Pointer to HW module.
+ *
+ * It is assumed that the initialization is a synchronous operation.
+ * So when we return afer posting the event, the HW SM should be in
+ * the ready state, if there were no errors during init.
+ */
+int
+csio_hw_start(struct csio_hw *hw)
+{
+	spin_lock_irq(&hw->lock);
+	csio_post_event(&hw->sm, CSIO_HWE_CFG);
+	spin_unlock_irq(&hw->lock);
+
+	if (csio_is_hw_ready(hw))
+		return 0;
+	else
+		return -EINVAL;
+}
+
+int
+csio_hw_stop(struct csio_hw *hw)
+{
+	csio_post_event(&hw->sm, CSIO_HWE_PCI_REMOVE);
+
+	if (csio_is_hw_removing(hw))
+		return 0;
+	else
+		return -EINVAL;
+}
+
+/* Max reset retries */
+#define CSIO_MAX_RESET_RETRIES	3
+
+/**
+ * csio_hw_reset - Reset the hardware
+ * @hw:		HW module.
+ *
+ * Caller should hold lock across this function.
+ */
+int
+csio_hw_reset(struct csio_hw *hw)
+{
+	if (!csio_is_hw_master(hw))
+		return -EPERM;
+
+	if (hw->rst_retries >= CSIO_MAX_RESET_RETRIES) {
+		csio_dbg(hw, "Max hw reset attempts reached..");
+		return -EINVAL;
+	}
+
+	hw->rst_retries++;
+	csio_post_event(&hw->sm, CSIO_HWE_HBA_RESET);
+
+	if (csio_is_hw_ready(hw)) {
+		hw->rst_retries = 0;
+		hw->stats.n_reset_start = jiffies_to_msecs(jiffies);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+/*
+ * csio_hw_get_device_id - Caches the Adapter's vendor & device id.
+ * @hw: HW module.
+ */
+static void
+csio_hw_get_device_id(struct csio_hw *hw)
+{
+	/* Is the adapter device id cached already ?*/
+	if (csio_is_dev_id_cached(hw))
+		return;
+
+	/* Get the PCI vendor & device id */
+	pci_read_config_word(hw->pdev, PCI_VENDOR_ID,
+			     &hw->params.pci.vendor_id);
+	pci_read_config_word(hw->pdev, PCI_DEVICE_ID,
+			     &hw->params.pci.device_id);
+
+	csio_dev_id_cached(hw);
+
+} /* csio_hw_get_device_id */
+
+/*
+ * csio_hw_set_description - Set the model, description of the hw.
+ * @hw: HW module.
+ * @ven_id: PCI Vendor ID
+ * @dev_id: PCI Device ID
+ */
+static void
+csio_hw_set_description(struct csio_hw *hw, uint16_t ven_id, uint16_t dev_id)
+{
+	uint32_t adap_type, prot_type;
+
+	if (ven_id == CSIO_VENDOR_ID) {
+		prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK);
+		adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK);
+
+		if (prot_type == CSIO_FPGA) {
+			memcpy(hw->model_desc,
+				csio_fcoe_adapters[13].description, 32);
+		} else if (prot_type == CSIO_T4_FCOE_ASIC) {
+			memcpy(hw->hw_ver,
+			       csio_fcoe_adapters[adap_type].model_no, 16);
+			memcpy(hw->model_desc,
+				csio_fcoe_adapters[adap_type].description, 32);
+		} else {
+			char tempName[32] = "Chelsio FCoE Controller";
+			memcpy(hw->model_desc, tempName, 32);
+
+			CSIO_DB_ASSERT(0);
+		}
+	}
+} /* csio_hw_set_description */
+
+/**
+ * csio_hw_init - Initialize HW module.
+ * @hw:		Pointer to HW module.
+ *
+ * Initialize the members of the HW module.
+ */
+int
+csio_hw_init(struct csio_hw *hw)
+{
+	int rv = -EINVAL;
+	uint32_t i;
+	uint16_t ven_id, dev_id;
+	struct csio_evt_msg	*evt_entry;
+
+	INIT_LIST_HEAD(&hw->sm.sm_list);
+	csio_init_state(&hw->sm, csio_hws_uninit);
+	spin_lock_init(&hw->lock);
+	INIT_LIST_HEAD(&hw->sln_head);
+
+	/* Get the PCI vendor & device id */
+	csio_hw_get_device_id(hw);
+
+	strcpy(hw->name, CSIO_HW_NAME);
+
+	/* Set the model & its description */
+
+	ven_id = hw->params.pci.vendor_id;
+	dev_id = hw->params.pci.device_id;
+
+	csio_hw_set_description(hw, ven_id, dev_id);
+
+	/* Initialize default log level */
+	hw->params.log_level = (uint32_t) csio_dbg_level;
+
+	csio_set_fwevt_intr_idx(hw, -1);
+	csio_set_nondata_intr_idx(hw, -1);
+
+	/* Init all the modules: Mailbox, WorkRequest and Transport */
+	if (csio_mbm_init(csio_hw_to_mbm(hw), hw, csio_hw_mb_timer))
+		goto err;
+
+	rv = csio_wrm_init(csio_hw_to_wrm(hw), hw);
+	if (rv)
+		goto err_mbm_exit;
+
+	rv = csio_scsim_init(csio_hw_to_scsim(hw), hw);
+	if (rv)
+		goto err_wrm_exit;
+
+	rv = csio_mgmtm_init(csio_hw_to_mgmtm(hw), hw);
+	if (rv)
+		goto err_scsim_exit;
+	/* Pre-allocate evtq and initialize them */
+	INIT_LIST_HEAD(&hw->evt_active_q);
+	INIT_LIST_HEAD(&hw->evt_free_q);
+	for (i = 0; i < csio_evtq_sz; i++) {
+
+		evt_entry = kzalloc(sizeof(struct csio_evt_msg), GFP_KERNEL);
+		if (!evt_entry) {
+			csio_err(hw, "Failed to initialize eventq");
+			goto err_evtq_cleanup;
+		}
+
+		list_add_tail(&evt_entry->list, &hw->evt_free_q);
+		CSIO_INC_STATS(hw, n_evt_freeq);
+	}
+
+	hw->dev_num = dev_num;
+	dev_num++;
+
+	return 0;
+
+err_evtq_cleanup:
+	csio_evtq_cleanup(hw);
+	csio_mgmtm_exit(csio_hw_to_mgmtm(hw));
+err_scsim_exit:
+	csio_scsim_exit(csio_hw_to_scsim(hw));
+err_wrm_exit:
+	csio_wrm_exit(csio_hw_to_wrm(hw), hw);
+err_mbm_exit:
+	csio_mbm_exit(csio_hw_to_mbm(hw));
+err:
+	return rv;
+}
+
+/**
+ * csio_hw_exit - Un-initialize HW module.
+ * @hw:		Pointer to HW module.
+ *
+ */
+void
+csio_hw_exit(struct csio_hw *hw)
+{
+	csio_evtq_cleanup(hw);
+	csio_mgmtm_exit(csio_hw_to_mgmtm(hw));
+	csio_scsim_exit(csio_hw_to_scsim(hw));
+	csio_wrm_exit(csio_hw_to_wrm(hw), hw);
+	csio_mbm_exit(csio_hw_to_mbm(hw));
+}
diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h
new file mode 100644
index 0000000..9edcca4
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_hw.h
@@ -0,0 +1,665 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_HW_H__
+#define __CSIO_HW_H__
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/compiler.h>
+#include <linux/cdev.h>
+#include <linux/list.h>
+#include <linux/mempool.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_fc.h>
+
+#include "csio_wr.h"
+#include "csio_mb.h"
+#include "csio_scsi.h"
+#include "csio_defs.h"
+#include "t4_regs.h"
+#include "t4_msg.h"
+
+/*
+ * An error value used by host. Should not clash with FW defined return values.
+ */
+#define	FW_HOSTERROR			255
+
+#define CSIO_FW_FNAME		"cxgb4/t4fw.bin"
+#define CSIO_CF_FNAME		"cxgb4/t4-config.txt"
+
+#define FW_VERSION_MAJOR	1
+#define FW_VERSION_MINOR	2
+#define FW_VERSION_MICRO	8
+
+#define CSIO_HW_NAME		"Chelsio FCoE Adapter"
+#define CSIO_MAX_PFN		8
+#define CSIO_MAX_PPORTS		4
+
+#define CSIO_MAX_LUN		0xFFFF
+#define CSIO_MAX_QUEUE		2048
+#define CSIO_MAX_CMD_PER_LUN	32
+#define CSIO_MAX_DDP_BUF_SIZE	(1024 * 1024)
+#define CSIO_MAX_SECTOR_SIZE	128
+
+/* Interrupts */
+#define CSIO_EXTRA_MSI_IQS	2	/* Extra iqs for INTX/MSI mode
+					 * (Forward intr iq + fw iq) */
+#define CSIO_EXTRA_VECS		2	/* non-data + FW evt */
+#define CSIO_MAX_SCSI_CPU	128
+#define CSIO_MAX_SCSI_QSETS	(CSIO_MAX_SCSI_CPU * CSIO_MAX_PPORTS)
+#define CSIO_MAX_MSIX_VECS	(CSIO_MAX_SCSI_QSETS + CSIO_EXTRA_VECS)
+
+/* Queues */
+enum {
+	CSIO_INTR_WRSIZE = 128,
+	CSIO_INTR_IQSIZE = ((CSIO_MAX_MSIX_VECS + 1) * CSIO_INTR_WRSIZE),
+	CSIO_FWEVT_WRSIZE = 128,
+	CSIO_FWEVT_IQLEN = 128,
+	CSIO_FWEVT_FLBUFS = 64,
+	CSIO_FWEVT_IQSIZE = (CSIO_FWEVT_WRSIZE * CSIO_FWEVT_IQLEN),
+	CSIO_HW_NIQ = 1,
+	CSIO_HW_NFLQ = 1,
+	CSIO_HW_NEQ = 1,
+	CSIO_HW_NINTXQ = 1,
+};
+
+struct csio_msix_entries {
+	unsigned short	vector;		/* Vector assigned by pci_enable_msix */
+	void		*dev_id;	/* Priv object associated w/ this msix*/
+	char		desc[24];	/* Description of this vector */
+};
+
+struct csio_scsi_qset {
+	int		iq_idx;		/* Ingress index */
+	int		eq_idx;		/* Egress index */
+	uint32_t	intr_idx;	/* MSIX Vector index */
+};
+
+struct csio_scsi_cpu_info {
+	int16_t	max_cpus;
+};
+
+extern int csio_dbg_level;
+extern int csio_force_master;
+extern unsigned int csio_port_mask;
+extern int csio_msi;
+
+#define CSIO_VENDOR_ID				0x1425
+#define CSIO_ASIC_DEVID_PROTO_MASK		0xFF00
+#define CSIO_ASIC_DEVID_TYPE_MASK		0x00FF
+#define CSIO_FPGA				0xA000
+#define CSIO_T4_FCOE_ASIC			0x4600
+
+#define CSIO_GLBL_INTR_MASK		(CIM | MPS | PL | PCIE | MC | EDC0 | \
+					 EDC1 | LE | TP | MA | PM_TX | PM_RX | \
+					 ULP_RX | CPL_SWITCH | SGE | \
+					 ULP_TX | SF)
+
+/*
+ * Hard parameters used to initialize the card in the absence of a
+ * configuration file.
+ */
+enum {
+	/* General */
+	CSIO_SGE_DBFIFO_INT_THRESH	= 10,
+
+	CSIO_SGE_RX_DMA_OFFSET		= 2,
+
+	CSIO_SGE_FLBUF_SIZE1		= 65536,
+	CSIO_SGE_FLBUF_SIZE2		= 1536,
+	CSIO_SGE_FLBUF_SIZE3		= 9024,
+	CSIO_SGE_FLBUF_SIZE4		= 9216,
+	CSIO_SGE_FLBUF_SIZE5		= 2048,
+	CSIO_SGE_FLBUF_SIZE6		= 128,
+	CSIO_SGE_FLBUF_SIZE7		= 8192,
+	CSIO_SGE_FLBUF_SIZE8		= 16384,
+
+	CSIO_SGE_TIMER_VAL_0		= 5,
+	CSIO_SGE_TIMER_VAL_1		= 10,
+	CSIO_SGE_TIMER_VAL_2		= 20,
+	CSIO_SGE_TIMER_VAL_3		= 50,
+	CSIO_SGE_TIMER_VAL_4		= 100,
+	CSIO_SGE_TIMER_VAL_5		= 200,
+
+	CSIO_SGE_INT_CNT_VAL_0		= 1,
+	CSIO_SGE_INT_CNT_VAL_1		= 4,
+	CSIO_SGE_INT_CNT_VAL_2		= 8,
+	CSIO_SGE_INT_CNT_VAL_3		= 16,
+
+	/* Storage specific - used by FW_PFVF_CMD */
+	CSIO_WX_CAPS			= FW_CMD_CAP_PF, /* w/x all */
+	CSIO_R_CAPS			= FW_CMD_CAP_PF, /* r all */
+	CSIO_NVI			= 4,
+	CSIO_NIQ_FLINT			= 34,
+	CSIO_NETH_CTRL			= 32,
+	CSIO_NEQ			= 66,
+	CSIO_NEXACTF			= 32,
+	CSIO_CMASK			= FW_PFVF_CMD_CMASK_MASK,
+	CSIO_PMASK			= FW_PFVF_CMD_PMASK_MASK,
+};
+
+/* Slowpath events */
+enum csio_evt {
+	CSIO_EVT_FW  = 0,	/* FW event */
+	CSIO_EVT_MBX,		/* MBX event */
+	CSIO_EVT_SCN,		/* State change notification */
+	CSIO_EVT_DEV_LOSS,	/* Device loss event */
+	CSIO_EVT_MAX,		/* Max supported event */
+};
+
+#define CSIO_EVT_MSG_SIZE	512
+#define CSIO_EVTQ_SIZE		512
+
+/* Event msg  */
+struct csio_evt_msg {
+	struct list_head	list;	/* evt queue*/
+	enum csio_evt		type;
+	uint8_t			data[CSIO_EVT_MSG_SIZE];
+};
+
+enum {
+	EEPROMVSIZE    = 32768, /* Serial EEPROM virtual address space size */
+	SERNUM_LEN     = 16,    /* Serial # length */
+	EC_LEN         = 16,    /* E/C length */
+	ID_LEN         = 16,    /* ID length */
+	TRACE_LEN      = 112,   /* length of trace data and mask */
+};
+
+enum {
+	SF_PAGE_SIZE = 256,           /* serial flash page size */
+	SF_SEC_SIZE = 64 * 1024,      /* serial flash sector size */
+	SF_SIZE = SF_SEC_SIZE * 16,   /* serial flash size */
+};
+
+enum { MEM_EDC0, MEM_EDC1, MEM_MC };
+
+enum {
+	MEMWIN0_APERTURE = 2048,
+	MEMWIN0_BASE     = 0x1b800,
+	MEMWIN1_APERTURE = 32768,
+	MEMWIN1_BASE     = 0x28000,
+	MEMWIN2_APERTURE = 65536,
+	MEMWIN2_BASE     = 0x30000,
+};
+
+/* serial flash and firmware constants */
+enum {
+	SF_ATTEMPTS = 10,             /* max retries for SF operations */
+
+	/* flash command opcodes */
+	SF_PROG_PAGE    = 2,          /* program page */
+	SF_WR_DISABLE   = 4,          /* disable writes */
+	SF_RD_STATUS    = 5,          /* read status register */
+	SF_WR_ENABLE    = 6,          /* enable writes */
+	SF_RD_DATA_FAST = 0xb,        /* read flash */
+	SF_RD_ID	= 0x9f,	      /* read ID */
+	SF_ERASE_SECTOR = 0xd8,       /* erase sector */
+
+	FW_START_SEC = 8,             /* first flash sector for FW */
+	FW_END_SEC = 15,              /* last flash sector for FW */
+	FW_IMG_START = FW_START_SEC * SF_SEC_SIZE,
+	FW_MAX_SIZE = (FW_END_SEC - FW_START_SEC + 1) * SF_SEC_SIZE,
+
+	FLASH_CFG_MAX_SIZE    = 0x10000 , /* max size of the flash config file*/
+	FLASH_CFG_OFFSET      = 0x1f0000,
+	FLASH_CFG_START_SEC   = FLASH_CFG_OFFSET / SF_SEC_SIZE,
+	FPGA_FLASH_CFG_OFFSET = 0xf0000 , /* if FPGA mode, then cfg file is
+					   * at 1MB - 64KB */
+	FPGA_FLASH_CFG_START_SEC  = FPGA_FLASH_CFG_OFFSET / SF_SEC_SIZE,
+};
+
+/*
+ * Flash layout.
+ */
+#define FLASH_START(start)	((start) * SF_SEC_SIZE)
+#define FLASH_MAX_SIZE(nsecs)	((nsecs) * SF_SEC_SIZE)
+
+enum {
+	/*
+	 * Location of firmware image in FLASH.
+	 */
+	FLASH_FW_START_SEC = 8,
+	FLASH_FW_NSECS = 8,
+	FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC),
+	FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS),
+
+};
+
+#undef FLASH_START
+#undef FLASH_MAX_SIZE
+
+/* Management module */
+enum {
+	CSIO_MGMT_EQ_WRSIZE = 512,
+	CSIO_MGMT_IQ_WRSIZE = 128,
+	CSIO_MGMT_EQLEN = 64,
+	CSIO_MGMT_IQLEN = 64,
+};
+
+#define CSIO_MGMT_EQSIZE	(CSIO_MGMT_EQLEN * CSIO_MGMT_EQ_WRSIZE)
+#define CSIO_MGMT_IQSIZE	(CSIO_MGMT_IQLEN * CSIO_MGMT_IQ_WRSIZE)
+
+/* mgmt module stats */
+struct csio_mgmtm_stats {
+	uint32_t	n_abort_req;		/* Total abort request */
+	uint32_t	n_abort_rsp;		/* Total abort response */
+	uint32_t	n_close_req;		/* Total close request */
+	uint32_t	n_close_rsp;		/* Total close response */
+	uint32_t	n_err;			/* Total Errors */
+	uint32_t	n_drop;			/* Total request dropped */
+	uint32_t	n_active;		/* Count of active_q */
+	uint32_t	n_cbfn;			/* Count of cbfn_q */
+};
+
+/* MGMT module */
+struct csio_mgmtm {
+	struct	csio_hw		*hw;		/* Pointer to HW moduel */
+	int			eq_idx;		/* Egress queue index */
+	int			iq_idx;		/* Ingress queue index */
+	int			msi_vec;	/* MSI vector */
+	struct list_head	active_q;	/* Outstanding ELS/CT */
+	struct list_head	abort_q;	/* Outstanding abort req */
+	struct list_head	cbfn_q;		/* Completion queue */
+	struct list_head	mgmt_req_freelist; /* Free poll of reqs */
+						/* ELSCT request freelist*/
+	struct timer_list	mgmt_timer;	/* MGMT timer */
+	struct csio_mgmtm_stats stats;		/* ELS/CT stats */
+};
+
+struct csio_adap_desc {
+	char model_no[16];
+	char description[32];
+};
+
+struct pci_params {
+	uint16_t   vendor_id;
+	uint16_t   device_id;
+	uint32_t   vpd_cap_addr;
+	uint16_t   speed;
+	uint8_t    width;
+};
+
+/* User configurable hw parameters */
+struct csio_hw_params {
+	uint32_t		sf_size;		/* serial flash
+							 * size in bytes
+							 */
+	uint32_t		sf_nsec;		/* # of flash sectors */
+	struct pci_params	pci;
+	uint32_t		log_level;		/* Module-level for
+							 * debug log.
+							 */
+};
+
+struct csio_vpd {
+	uint32_t cclk;
+	uint8_t ec[EC_LEN + 1];
+	uint8_t sn[SERNUM_LEN + 1];
+	uint8_t id[ID_LEN + 1];
+};
+
+struct csio_pport {
+	uint16_t	pcap;
+	uint8_t		portid;
+	uint8_t		link_status;
+	uint16_t	link_speed;
+	uint8_t		mac[6];
+	uint8_t		mod_type;
+	uint8_t		rsvd1;
+	uint8_t		rsvd2;
+	uint8_t		rsvd3;
+};
+
+/* fcoe resource information */
+struct csio_fcoe_res_info {
+	uint16_t	e_d_tov;
+	uint16_t	r_a_tov_seq;
+	uint16_t	r_a_tov_els;
+	uint16_t	r_r_tov;
+	uint32_t	max_xchgs;
+	uint32_t	max_ssns;
+	uint32_t	used_xchgs;
+	uint32_t	used_ssns;
+	uint32_t	max_fcfs;
+	uint32_t	max_vnps;
+	uint32_t	used_fcfs;
+	uint32_t	used_vnps;
+};
+
+/* HW State machine Events */
+enum csio_hw_ev {
+	CSIO_HWE_CFG = (uint32_t)1, /* Starts off the State machine */
+	CSIO_HWE_INIT,	         /* Config done, start Init      */
+	CSIO_HWE_INIT_DONE,      /* Init Mailboxes sent, HW ready */
+	CSIO_HWE_FATAL,		 /* Fatal error during initialization */
+	CSIO_HWE_PCIERR_DETECTED,/* PCI error recovery detetced */
+	CSIO_HWE_PCIERR_SLOT_RESET, /* Slot reset after PCI recoviery */
+	CSIO_HWE_PCIERR_RESUME,  /* Resume after PCI error recovery */
+	CSIO_HWE_QUIESCED,	 /* HBA quiesced */
+	CSIO_HWE_HBA_RESET,      /* HBA reset requested */
+	CSIO_HWE_HBA_RESET_DONE, /* HBA reset completed */
+	CSIO_HWE_FW_DLOAD,       /* FW download requested */
+	CSIO_HWE_PCI_REMOVE,     /* PCI de-instantiation */
+	CSIO_HWE_SUSPEND,        /* HW suspend for Online(hot) replacement */
+	CSIO_HWE_RESUME,         /* HW resume for Online(hot) replacement */
+	CSIO_HWE_MAX,		 /* Max HW event */
+};
+
+/* hw stats */
+struct csio_hw_stats {
+	uint32_t	n_evt_activeq;	/* Number of event in active Q */
+	uint32_t	n_evt_freeq;	/* Number of event in free Q */
+	uint32_t	n_evt_drop;	/* Number of event droped */
+	uint32_t	n_evt_unexp;	/* Number of unexpected events */
+	uint32_t	n_pcich_offline;/* Number of pci channel offline */
+	uint32_t	n_lnlkup_miss;  /* Number of lnode lookup miss */
+	uint32_t	n_cpl_fw6_msg;	/* Number of cpl fw6 message*/
+	uint32_t	n_cpl_fw6_pld;	/* Number of cpl fw6 payload*/
+	uint32_t	n_cpl_unexp;	/* Number of unexpected cpl */
+	uint32_t	n_mbint_unexp;	/* Number of unexpected mbox */
+					/* interrupt */
+	uint32_t	n_plint_unexp;	/* Number of unexpected PL */
+					/* interrupt */
+	uint32_t	n_plint_cnt;	/* Number of PL interrupt */
+	uint32_t	n_int_stray;	/* Number of stray interrupt */
+	uint32_t	n_err;		/* Number of hw errors */
+	uint32_t	n_err_fatal;	/* Number of fatal errors */
+	uint32_t	n_err_nomem;	/* Number of memory alloc failure */
+	uint32_t	n_err_io;	/* Number of IO failure */
+	enum csio_hw_ev	n_evt_sm[CSIO_HWE_MAX];	/* Number of sm events */
+	uint64_t	n_reset_start;  /* Start time after the reset */
+	uint32_t	rsvd1;
+};
+
+/* Defines for hw->flags */
+#define CSIO_HWF_MASTER			0x00000001	/* This is the Master
+							 * function for the
+							 * card.
+							 */
+#define	CSIO_HWF_HW_INTR_ENABLED	0x00000002	/* Are HW Interrupt
+							 * enable bit set?
+							 */
+#define	CSIO_HWF_FWEVT_PENDING		0x00000004	/* FW events pending */
+#define	CSIO_HWF_Q_MEM_ALLOCED		0x00000008	/* Queues have been
+							 * allocated memory.
+							 */
+#define	CSIO_HWF_Q_FW_ALLOCED		0x00000010	/* Queues have been
+							 * allocated in FW.
+							 */
+#define CSIO_HWF_VPD_VALID		0x00000020	/* Valid VPD copied */
+#define CSIO_HWF_DEVID_CACHED		0X00000040	/* PCI vendor & device
+							 * id cached */
+#define	CSIO_HWF_FWEVT_STOP		0x00000080	/* Stop processing
+							 * FW events
+							 */
+#define CSIO_HWF_USING_SOFT_PARAMS	0x00000100      /* Using FW config
+							 * params
+							 */
+#define	CSIO_HWF_HOST_INTR_ENABLED	0x00000200	/* Are host interrupts
+							 * enabled?
+							 */
+
+#define csio_is_hw_intr_enabled(__hw)	\
+				((__hw)->flags & CSIO_HWF_HW_INTR_ENABLED)
+#define csio_is_host_intr_enabled(__hw)	\
+				((__hw)->flags & CSIO_HWF_HOST_INTR_ENABLED)
+#define csio_is_hw_master(__hw)		((__hw)->flags & CSIO_HWF_MASTER)
+#define csio_is_valid_vpd(__hw)		((__hw)->flags & CSIO_HWF_VPD_VALID)
+#define csio_is_dev_id_cached(__hw)	((__hw)->flags & CSIO_HWF_DEVID_CACHED)
+#define csio_valid_vpd_copied(__hw)	((__hw)->flags |= CSIO_HWF_VPD_VALID)
+#define csio_dev_id_cached(__hw)	((__hw)->flags |= CSIO_HWF_DEVID_CACHED)
+
+/* Defines for intr_mode */
+enum csio_intr_mode {
+	CSIO_IM_NONE = 0,
+	CSIO_IM_INTX = 1,
+	CSIO_IM_MSI  = 2,
+	CSIO_IM_MSIX = 3,
+};
+
+/* Master HW structure: One per function */
+struct csio_hw {
+	struct csio_sm		sm;			/* State machine: should
+							 * be the 1st member.
+							 */
+	spinlock_t		lock;			/* Lock for hw */
+
+	struct csio_scsim	scsim;			/* SCSI module*/
+	struct csio_wrm		wrm;			/* Work request module*/
+	struct pci_dev		*pdev;			/* PCI device */
+
+	void __iomem		*regstart;		/* Virtual address of
+							 * register map
+							 */
+	/* SCSI queue sets */
+	uint32_t		num_sqsets;		/* Number of SCSI
+							 * queue sets */
+	uint32_t		num_scsi_msix_cpus;	/* Number of CPUs that
+							 * will be used
+							 * for ingress
+							 * processing.
+							 */
+
+	struct csio_scsi_qset	sqset[CSIO_MAX_PPORTS][CSIO_MAX_SCSI_CPU];
+	struct csio_scsi_cpu_info scsi_cpu_info[CSIO_MAX_PPORTS];
+
+	uint32_t		evtflag;		/* Event flag  */
+	uint32_t		flags;			/* HW flags */
+
+	struct csio_mgmtm	mgmtm;			/* management module */
+	struct csio_mbm		mbm;			/* Mailbox module */
+
+	/* Lnodes */
+	uint32_t		num_lns;		/* Number of lnodes */
+	struct csio_lnode	*rln;			/* Root lnode */
+	struct list_head	sln_head;		/* Sibling node list
+							 * list
+							 */
+	int			intr_iq_idx;		/* Forward interrupt
+							 * queue.
+							 */
+	int			fwevt_iq_idx;		/* FW evt queue */
+	struct work_struct	evtq_work;		/* Worker thread for
+							 * HW events.
+							 */
+	struct list_head	evt_free_q;		/* freelist of evt
+							 * elements
+							 */
+	struct list_head	evt_active_q;		/* active evt queue*/
+
+	/* board related info */
+	char			name[32];
+	char			hw_ver[16];
+	char			model_desc[32];
+	char			drv_version[32];
+	char			fwrev_str[32];
+	uint32_t		optrom_ver;
+	uint32_t		fwrev;
+	uint32_t		tp_vers;
+	char			chip_ver;
+	uint32_t		cfg_finiver;
+	uint32_t		cfg_finicsum;
+	uint32_t		cfg_cfcsum;
+	uint8_t			cfg_csum_status;
+	uint8_t			cfg_store;
+	enum csio_dev_state	fw_state;
+	struct csio_vpd		vpd;
+
+	uint8_t			pfn;			/* Physical Function
+							 * number
+							 */
+	uint32_t		port_vec;		/* Port vector */
+	uint8_t			num_pports;		/* Number of physical
+							 * ports.
+							 */
+	uint8_t			rst_retries;		/* Reset retries */
+	uint8_t			cur_evt;		/* current s/m evt */
+	uint8_t			prev_evt;		/* Previous s/m evt */
+	uint32_t		dev_num;		/* device number */
+	struct csio_pport	pport[CSIO_MAX_PPORTS];	/* Ports (XGMACs) */
+	struct csio_hw_params	params;			/* Hw parameters */
+
+	struct pci_pool		*scsi_pci_pool;		/* PCI pool for SCSI */
+	mempool_t		*mb_mempool;		/* Mailbox memory pool*/
+	mempool_t		*rnode_mempool;		/* rnode memory pool */
+
+	/* Interrupt */
+	enum csio_intr_mode	intr_mode;		/* INTx, MSI, MSIX */
+	uint32_t		fwevt_intr_idx;		/* FW evt MSIX/interrupt
+							 * index
+							 */
+	uint32_t		nondata_intr_idx;	/* nondata MSIX/intr
+							 * idx
+							 */
+
+	uint8_t			cfg_neq;		/* FW configured no of
+							 * egress queues
+							 */
+	uint8_t			cfg_niq;		/* FW configured no of
+							 * iq queues.
+							 */
+
+	struct csio_fcoe_res_info  fres_info;		/* Fcoe resource info */
+
+	/* MSIX vectors */
+	struct csio_msix_entries msix_entries[CSIO_MAX_MSIX_VECS];
+
+	struct dentry		*debugfs_root;		/* Debug FS */
+	struct csio_hw_stats	stats;			/* Hw statistics */
+};
+
+/* Register access macros */
+#define csio_reg(_b, _r)		((_b) + (_r))
+
+#define	csio_rd_reg8(_h, _r)		readb(csio_reg((_h)->regstart, (_r)))
+#define	csio_rd_reg16(_h, _r)		readw(csio_reg((_h)->regstart, (_r)))
+#define	csio_rd_reg32(_h, _r)		readl(csio_reg((_h)->regstart, (_r)))
+#define	csio_rd_reg64(_h, _r)		readq(csio_reg((_h)->regstart, (_r)))
+
+#define	csio_wr_reg8(_h, _v, _r)	writeb((_v), \
+						csio_reg((_h)->regstart, (_r)))
+#define	csio_wr_reg16(_h, _v, _r)	writew((_v), \
+						csio_reg((_h)->regstart, (_r)))
+#define	csio_wr_reg32(_h, _v, _r)	writel((_v), \
+						csio_reg((_h)->regstart, (_r)))
+#define	csio_wr_reg64(_h, _v, _r)	writeq((_v), \
+						csio_reg((_h)->regstart, (_r)))
+
+void csio_set_reg_field(struct csio_hw *, uint32_t, uint32_t, uint32_t);
+
+/* Core clocks <==> uSecs */
+static inline uint32_t
+csio_core_ticks_to_us(struct csio_hw *hw, uint32_t ticks)
+{
+	/* add Core Clock / 2 to round ticks to nearest uS */
+	return (ticks * 1000 + hw->vpd.cclk/2) / hw->vpd.cclk;
+}
+
+static inline uint32_t
+csio_us_to_core_ticks(struct csio_hw *hw, uint32_t us)
+{
+	return (us * hw->vpd.cclk) / 1000;
+}
+
+/* Easy access macros */
+#define csio_hw_to_wrm(hw)		((struct csio_wrm *)(&(hw)->wrm))
+#define csio_hw_to_mbm(hw)		((struct csio_mbm *)(&(hw)->mbm))
+#define csio_hw_to_scsim(hw)		((struct csio_scsim *)(&(hw)->scsim))
+#define csio_hw_to_mgmtm(hw)		((struct csio_mgmtm *)(&(hw)->mgmtm))
+
+#define CSIO_PCI_BUS(hw)		((hw)->pdev->bus->number)
+#define CSIO_PCI_DEV(hw)		(PCI_SLOT((hw)->pdev->devfn))
+#define CSIO_PCI_FUNC(hw)		(PCI_FUNC((hw)->pdev->devfn))
+
+#define csio_set_fwevt_intr_idx(_h, _i)		((_h)->fwevt_intr_idx = (_i))
+#define csio_get_fwevt_intr_idx(_h)		((_h)->fwevt_intr_idx)
+#define csio_set_nondata_intr_idx(_h, _i)	((_h)->nondata_intr_idx = (_i))
+#define csio_get_nondata_intr_idx(_h)		((_h)->nondata_intr_idx)
+
+/* Printing/logging */
+#define CSIO_DEVID(__dev)		((__dev)->dev_num)
+#define CSIO_DEVID_LO(__dev)		(CSIO_DEVID((__dev)) & 0xFFFF)
+#define CSIO_DEVID_HI(__dev)		((CSIO_DEVID((__dev)) >> 16) & 0xFFFF)
+
+#define csio_info(__hw, __fmt, ...)					\
+			dev_info(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__)
+
+#define csio_fatal(__hw, __fmt, ...)					\
+			dev_crit(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__)
+
+#define csio_err(__hw, __fmt, ...)					\
+			dev_err(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__)
+
+#define csio_warn(__hw, __fmt, ...)					\
+			dev_warn(&(__hw)->pdev->dev, __fmt, ##__VA_ARGS__)
+
+#ifdef __CSIO_DEBUG__
+#define csio_dbg(__hw, __fmt, ...)					\
+			csio_info((__hw), __fmt, ##__VA_ARGS__);
+#else
+#define csio_dbg(__hw, __fmt, ...)
+#endif
+
+int csio_mgmt_req_lookup(struct csio_mgmtm *, struct csio_ioreq *);
+void csio_hw_intr_disable(struct csio_hw *);
+int csio_hw_slow_intr_handler(struct csio_hw *hw);
+int csio_hw_start(struct csio_hw *);
+int csio_hw_stop(struct csio_hw *);
+int csio_hw_reset(struct csio_hw *);
+int csio_is_hw_ready(struct csio_hw *);
+int csio_is_hw_removing(struct csio_hw *);
+
+int csio_fwevtq_handler(struct csio_hw *);
+void csio_evtq_worker(struct work_struct *);
+int csio_enqueue_evt(struct csio_hw *hw, enum csio_evt type,
+				void *evt_msg, uint16_t len);
+void csio_evtq_flush(struct csio_hw *hw);
+
+int csio_request_irqs(struct csio_hw *);
+void csio_intr_enable(struct csio_hw *);
+void csio_intr_disable(struct csio_hw *, bool);
+
+struct csio_lnode *csio_lnode_alloc(struct csio_hw *);
+int csio_config_queues(struct csio_hw *);
+
+int csio_hw_mc_read(struct csio_hw *, uint32_t, __be32 *, uint64_t *);
+int csio_hw_edc_read(struct csio_hw *, int, uint32_t, __be32 *, uint64_t *);
+int csio_hw_init(struct csio_hw *);
+void csio_hw_exit(struct csio_hw *);
+#endif /* ifndef __CSIO_HW_H__ */
diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
new file mode 100644
index 0000000..fdd408f
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -0,0 +1,1274 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+#include <linux/kdebug.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/string.h>
+#include <linux/export.h>
+
+#include "csio_init.h"
+#include "csio_defs.h"
+
+#define CSIO_MIN_MEMPOOL_SZ	64
+
+static struct dentry *csio_debugfs_root;
+
+static struct scsi_transport_template *csio_fcoe_transport;
+static struct scsi_transport_template *csio_fcoe_transport_vport;
+
+/*
+ * debugfs support
+ */
+static int
+csio_mem_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t
+csio_mem_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	loff_t pos = *ppos;
+	loff_t avail = file->f_path.dentry->d_inode->i_size;
+	unsigned int mem = (uintptr_t)file->private_data & 3;
+	struct csio_hw *hw = file->private_data - mem;
+
+	if (pos < 0)
+		return -EINVAL;
+	if (pos >= avail)
+		return 0;
+	if (count > avail - pos)
+		count = avail - pos;
+
+	while (count) {
+		size_t len;
+		int ret, ofst;
+		__be32 data[16];
+
+		if (mem == MEM_MC)
+			ret = csio_hw_mc_read(hw, pos, data, NULL);
+		else
+			ret = csio_hw_edc_read(hw, mem, pos, data, NULL);
+		if (ret)
+			return ret;
+
+		ofst = pos % sizeof(data);
+		len = min(count, sizeof(data) - ofst);
+		if (copy_to_user(buf, (u8 *)data + ofst, len))
+			return -EFAULT;
+
+		buf += len;
+		pos += len;
+		count -= len;
+	}
+	count = pos - *ppos;
+	*ppos = pos;
+	return count;
+}
+
+static const struct file_operations csio_mem_debugfs_fops = {
+	.owner   = THIS_MODULE,
+	.open    = csio_mem_open,
+	.read    = csio_mem_read,
+	.llseek  = default_llseek,
+};
+
+static void __devinit
+csio_add_debugfs_mem(struct csio_hw *hw, const char *name,
+		     unsigned int idx, unsigned int size_mb)
+{
+	struct dentry *de;
+
+	de = debugfs_create_file(name, S_IRUSR, hw->debugfs_root,
+				 (void *)hw + idx, &csio_mem_debugfs_fops);
+	if (de && de->d_inode)
+		de->d_inode->i_size = size_mb << 20;
+}
+
+static int __devinit
+csio_setup_debugfs(struct csio_hw *hw)
+{
+	int i;
+
+	if (IS_ERR_OR_NULL(hw->debugfs_root))
+		return -1;
+
+	i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE);
+	if (i & EDRAM0_ENABLE)
+		csio_add_debugfs_mem(hw, "edc0", MEM_EDC0, 5);
+	if (i & EDRAM1_ENABLE)
+		csio_add_debugfs_mem(hw, "edc1", MEM_EDC1, 5);
+	if (i & EXT_MEM_ENABLE)
+		csio_add_debugfs_mem(hw, "mc", MEM_MC,
+		      EXT_MEM_SIZE_GET(csio_rd_reg32(hw, MA_EXT_MEMORY_BAR)));
+	return 0;
+}
+
+/*
+ * csio_dfs_create - Creates and sets up per-hw debugfs.
+ *
+ */
+static int
+csio_dfs_create(struct csio_hw *hw)
+{
+	if (csio_debugfs_root) {
+		hw->debugfs_root = debugfs_create_dir(pci_name(hw->pdev),
+							csio_debugfs_root);
+		csio_setup_debugfs(hw);
+	}
+
+	return 0;
+}
+
+/*
+ * csio_dfs_destroy - Destroys per-hw debugfs.
+ */
+static int
+csio_dfs_destroy(struct csio_hw *hw)
+{
+	if (hw->debugfs_root)
+		debugfs_remove_recursive(hw->debugfs_root);
+
+	return 0;
+}
+
+/*
+ * csio_dfs_init - Debug filesystem initialization for the module.
+ *
+ */
+static int
+csio_dfs_init(void)
+{
+	csio_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (!csio_debugfs_root)
+		pr_warn("Could not create debugfs entry, continuing\n");
+
+	return 0;
+}
+
+/*
+ * csio_dfs_exit - debugfs cleanup for the module.
+ */
+static void
+csio_dfs_exit(void)
+{
+	debugfs_remove(csio_debugfs_root);
+}
+
+/*
+ * csio_pci_init - PCI initialization.
+ * @pdev: PCI device.
+ * @bars: Bitmask of bars to be requested.
+ *
+ * Initializes the PCI function by enabling MMIO, setting bus
+ * mastership and setting DMA mask.
+ */
+static int
+csio_pci_init(struct pci_dev *pdev, int *bars)
+{
+	int rv = -ENODEV;
+
+	*bars = pci_select_bars(pdev, IORESOURCE_MEM);
+
+	if (pci_enable_device_mem(pdev))
+		goto err;
+
+	if (pci_request_selected_regions(pdev, *bars, KBUILD_MODNAME))
+		goto err_disable_device;
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	} else {
+		dev_err(&pdev->dev, "No suitable DMA available.\n");
+		goto err_release_regions;
+	}
+
+	return 0;
+
+err_release_regions:
+	pci_release_selected_regions(pdev, *bars);
+err_disable_device:
+	pci_disable_device(pdev);
+err:
+	return rv;
+
+}
+
+/*
+ * csio_pci_exit - PCI unitialization.
+ * @pdev: PCI device.
+ * @bars: Bars to be released.
+ *
+ */
+static void
+csio_pci_exit(struct pci_dev *pdev, int *bars)
+{
+	pci_release_selected_regions(pdev, *bars);
+	pci_disable_device(pdev);
+}
+
+/*
+ * csio_hw_init_workers - Initialize the HW module's worker threads.
+ * @hw: HW module.
+ *
+ */
+static void
+csio_hw_init_workers(struct csio_hw *hw)
+{
+	INIT_WORK(&hw->evtq_work, csio_evtq_worker);
+}
+
+static void
+csio_hw_exit_workers(struct csio_hw *hw)
+{
+	cancel_work_sync(&hw->evtq_work);
+	flush_scheduled_work();
+}
+
+static int
+csio_create_queues(struct csio_hw *hw)
+{
+	int i, j;
+	struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw);
+	int rv;
+	struct csio_scsi_cpu_info *info;
+
+	if (hw->flags & CSIO_HWF_Q_FW_ALLOCED)
+		return 0;
+
+	if (hw->intr_mode != CSIO_IM_MSIX) {
+		rv = csio_wr_iq_create(hw, NULL, hw->intr_iq_idx,
+					0, hw->pport[0].portid, false, NULL);
+		if (rv != 0) {
+			csio_err(hw, " Forward Interrupt IQ failed!: %d\n", rv);
+			return rv;
+		}
+	}
+
+	/* FW event queue */
+	rv = csio_wr_iq_create(hw, NULL, hw->fwevt_iq_idx,
+			       csio_get_fwevt_intr_idx(hw),
+			       hw->pport[0].portid, true, NULL);
+	if (rv != 0) {
+		csio_err(hw, "FW event IQ config failed!: %d\n", rv);
+		return rv;
+	}
+
+	/* Create mgmt queue */
+	rv = csio_wr_eq_create(hw, NULL, mgmtm->eq_idx,
+			mgmtm->iq_idx, hw->pport[0].portid, NULL);
+
+	if (rv != 0) {
+		csio_err(hw, "Mgmt EQ create failed!: %d\n", rv);
+		goto err;
+	}
+
+	/* Create SCSI queues */
+	for (i = 0; i < hw->num_pports; i++) {
+		info = &hw->scsi_cpu_info[i];
+
+		for (j = 0; j < info->max_cpus; j++) {
+			struct csio_scsi_qset *sqset = &hw->sqset[i][j];
+
+			rv = csio_wr_iq_create(hw, NULL, sqset->iq_idx,
+					       sqset->intr_idx, i, false, NULL);
+			if (rv != 0) {
+				csio_err(hw,
+				   "SCSI module IQ config failed [%d][%d]:%d\n",
+				   i, j, rv);
+				goto err;
+			}
+			rv = csio_wr_eq_create(hw, NULL, sqset->eq_idx,
+					       sqset->iq_idx, i, NULL);
+			if (rv != 0) {
+				csio_err(hw,
+				   "SCSI module EQ config failed [%d][%d]:%d\n",
+				   i, j, rv);
+				goto err;
+			}
+		} /* for all CPUs */
+	} /* For all ports */
+
+	hw->flags |= CSIO_HWF_Q_FW_ALLOCED;
+	return 0;
+err:
+	csio_wr_destroy_queues(hw, true);
+	return -EINVAL;
+}
+
+/*
+ * csio_config_queues - Configure the DMA queues.
+ * @hw: HW module.
+ *
+ * Allocates memory for queues are registers them with FW.
+ */
+int
+csio_config_queues(struct csio_hw *hw)
+{
+	int i, j, idx, k = 0;
+	int rv;
+	struct csio_scsi_qset *sqset;
+	struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw);
+	struct csio_scsi_qset *orig;
+	struct csio_scsi_cpu_info *info;
+
+	if (hw->flags & CSIO_HWF_Q_MEM_ALLOCED)
+		return csio_create_queues(hw);
+
+	/* Calculate number of SCSI queues for MSIX we would like */
+	hw->num_scsi_msix_cpus = num_online_cpus();
+	hw->num_sqsets = num_online_cpus() * hw->num_pports;
+
+	if (hw->num_sqsets > CSIO_MAX_SCSI_QSETS) {
+		hw->num_sqsets = CSIO_MAX_SCSI_QSETS;
+		hw->num_scsi_msix_cpus = CSIO_MAX_SCSI_CPU;
+	}
+
+	/* Initialize max_cpus, may get reduced during msix allocations */
+	for (i = 0; i < hw->num_pports; i++)
+		hw->scsi_cpu_info[i].max_cpus = hw->num_scsi_msix_cpus;
+
+	csio_dbg(hw, "nsqsets:%d scpus:%d\n",
+		    hw->num_sqsets, hw->num_scsi_msix_cpus);
+
+	csio_intr_enable(hw);
+
+	if (hw->intr_mode != CSIO_IM_MSIX) {
+
+		/* Allocate Forward interrupt iq. */
+		hw->intr_iq_idx = csio_wr_alloc_q(hw, CSIO_INTR_IQSIZE,
+						CSIO_INTR_WRSIZE, CSIO_INGRESS,
+						(void *)hw, 0, 0, NULL);
+		if (hw->intr_iq_idx == -1) {
+			csio_err(hw,
+				 "Forward interrupt queue creation failed\n");
+			goto intr_disable;
+		}
+	}
+
+	/* Allocate the FW evt queue */
+	hw->fwevt_iq_idx = csio_wr_alloc_q(hw, CSIO_FWEVT_IQSIZE,
+					   CSIO_FWEVT_WRSIZE,
+					   CSIO_INGRESS, (void *)hw,
+					   CSIO_FWEVT_FLBUFS, 0,
+					   csio_fwevt_intx_handler);
+	if (hw->fwevt_iq_idx == -1) {
+		csio_err(hw, "FW evt queue creation failed\n");
+		goto intr_disable;
+	}
+
+	/* Allocate the mgmt queue */
+	mgmtm->eq_idx = csio_wr_alloc_q(hw, CSIO_MGMT_EQSIZE,
+				      CSIO_MGMT_EQ_WRSIZE,
+				      CSIO_EGRESS, (void *)hw, 0, 0, NULL);
+	if (mgmtm->eq_idx == -1) {
+		csio_err(hw, "Failed to alloc egress queue for mgmt module\n");
+		goto intr_disable;
+	}
+
+	/* Use FW IQ for MGMT req completion */
+	mgmtm->iq_idx = hw->fwevt_iq_idx;
+
+	/* Allocate SCSI queues */
+	for (i = 0; i < hw->num_pports; i++) {
+		info = &hw->scsi_cpu_info[i];
+
+		for (j = 0; j < hw->num_scsi_msix_cpus; j++) {
+			sqset = &hw->sqset[i][j];
+
+			if (j >= info->max_cpus) {
+				k = j % info->max_cpus;
+				orig = &hw->sqset[i][k];
+				sqset->eq_idx = orig->eq_idx;
+				sqset->iq_idx = orig->iq_idx;
+				continue;
+			}
+
+			idx = csio_wr_alloc_q(hw, csio_scsi_eqsize, 0,
+					      CSIO_EGRESS, (void *)hw, 0, 0,
+					      NULL);
+			if (idx == -1) {
+				csio_err(hw, "EQ creation failed for idx:%d\n",
+					    idx);
+				goto intr_disable;
+			}
+
+			sqset->eq_idx = idx;
+
+			idx = csio_wr_alloc_q(hw, CSIO_SCSI_IQSIZE,
+					     CSIO_SCSI_IQ_WRSZ, CSIO_INGRESS,
+					     (void *)hw, 0, 0,
+					     csio_scsi_intx_handler);
+			if (idx == -1) {
+				csio_err(hw, "IQ creation failed for idx:%d\n",
+					    idx);
+				goto intr_disable;
+			}
+			sqset->iq_idx = idx;
+		} /* for all CPUs */
+	} /* For all ports */
+
+	hw->flags |= CSIO_HWF_Q_MEM_ALLOCED;
+
+	rv = csio_create_queues(hw);
+	if (rv != 0)
+		goto intr_disable;
+
+	/*
+	 * Now request IRQs for the vectors. In the event of a failure,
+	 * cleanup is handled internally by this function.
+	 */
+	rv = csio_request_irqs(hw);
+	if (rv != 0)
+		return -EINVAL;
+
+	return 0;
+
+intr_disable:
+	csio_intr_disable(hw, false);
+
+	return -EINVAL;
+}
+
+static int
+csio_resource_alloc(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	int rv = -ENOMEM;
+
+	wrm->num_q = ((CSIO_MAX_SCSI_QSETS * 2) + CSIO_HW_NIQ +
+		       CSIO_HW_NEQ + CSIO_HW_NFLQ + CSIO_HW_NINTXQ);
+
+	hw->mb_mempool = mempool_create_kmalloc_pool(CSIO_MIN_MEMPOOL_SZ,
+						  sizeof(struct csio_mb));
+	if (!hw->mb_mempool)
+		goto err;
+
+	hw->rnode_mempool = mempool_create_kmalloc_pool(CSIO_MIN_MEMPOOL_SZ,
+						     sizeof(struct csio_rnode));
+	if (!hw->rnode_mempool)
+		goto err_free_mb_mempool;
+
+	hw->scsi_pci_pool = pci_pool_create("csio_scsi_pci_pool", hw->pdev,
+					    CSIO_SCSI_RSP_LEN, 8, 0);
+	if (!hw->scsi_pci_pool)
+		goto err_free_rn_pool;
+
+	return 0;
+
+err_free_rn_pool:
+	mempool_destroy(hw->rnode_mempool);
+	hw->rnode_mempool = NULL;
+err_free_mb_mempool:
+	mempool_destroy(hw->mb_mempool);
+	hw->mb_mempool = NULL;
+err:
+	return rv;
+}
+
+static void
+csio_resource_free(struct csio_hw *hw)
+{
+	pci_pool_destroy(hw->scsi_pci_pool);
+	hw->scsi_pci_pool = NULL;
+	mempool_destroy(hw->rnode_mempool);
+	hw->rnode_mempool = NULL;
+	mempool_destroy(hw->mb_mempool);
+	hw->mb_mempool = NULL;
+}
+
+/*
+ * csio_hw_alloc - Allocate and initialize the HW module.
+ * @pdev: PCI device.
+ *
+ * Allocates HW structure, DMA, memory resources, maps BARS to
+ * host memory and initializes HW module.
+ */
+static struct csio_hw * __devinit
+csio_hw_alloc(struct pci_dev *pdev)
+{
+	struct csio_hw *hw;
+
+	hw = kzalloc(sizeof(struct csio_hw), GFP_KERNEL);
+	if (!hw)
+		goto err;
+
+	hw->pdev = pdev;
+	strncpy(hw->drv_version, CSIO_DRV_VERSION, 32);
+
+	/* memory pool/DMA pool allocation */
+	if (csio_resource_alloc(hw))
+		goto err_free_hw;
+
+	/* Get the start address of registers from BAR 0 */
+	hw->regstart = ioremap_nocache(pci_resource_start(pdev, 0),
+				       pci_resource_len(pdev, 0));
+	if (!hw->regstart) {
+		csio_err(hw, "Could not map BAR 0, regstart = %p\n",
+			 hw->regstart);
+		goto err_resource_free;
+	}
+
+	csio_hw_init_workers(hw);
+
+	if (csio_hw_init(hw))
+		goto err_unmap_bar;
+
+	csio_dfs_create(hw);
+
+	csio_dbg(hw, "hw:%p\n", hw);
+
+	return hw;
+
+err_unmap_bar:
+	csio_hw_exit_workers(hw);
+	iounmap(hw->regstart);
+err_resource_free:
+	csio_resource_free(hw);
+err_free_hw:
+	kfree(hw);
+err:
+	return NULL;
+}
+
+/*
+ * csio_hw_free - Uninitialize and free the HW module.
+ * @hw: The HW module
+ *
+ * Disable interrupts, uninit the HW module, free resources, free hw.
+ */
+static void
+csio_hw_free(struct csio_hw *hw)
+{
+	csio_intr_disable(hw, true);
+	csio_hw_exit_workers(hw);
+	csio_hw_exit(hw);
+	iounmap(hw->regstart);
+	csio_dfs_destroy(hw);
+	csio_resource_free(hw);
+	kfree(hw);
+}
+
+/**
+ * csio_shost_init - Create and initialize the lnode module.
+ * @hw:		The HW module.
+ * @dev:	The device associated with this invocation.
+ * @probe:	Called from probe context or not?
+ * @os_pln:	Parent lnode if any.
+ *
+ * Allocates lnode structure via scsi_host_alloc, initializes
+ * shost, initializes lnode module and registers with SCSI ML
+ * via scsi_host_add. This function is shared between physical and
+ * virtual node ports.
+ */
+struct csio_lnode *
+csio_shost_init(struct csio_hw *hw, struct device *dev,
+		  bool probe, struct csio_lnode *pln)
+{
+	struct Scsi_Host  *shost = NULL;
+	struct csio_lnode *ln;
+
+	csio_fcoe_shost_template.cmd_per_lun = csio_lun_qdepth;
+	csio_fcoe_shost_vport_template.cmd_per_lun = csio_lun_qdepth;
+
+	/*
+	 * hw->pdev is the physical port's PCI dev structure,
+	 * which will be different from the NPIV dev structure.
+	 */
+	if (dev == &hw->pdev->dev)
+		shost = scsi_host_alloc(
+				&csio_fcoe_shost_template,
+				sizeof(struct csio_lnode));
+	else
+		shost = scsi_host_alloc(
+				&csio_fcoe_shost_vport_template,
+				sizeof(struct csio_lnode));
+
+	if (!shost)
+		goto err;
+
+	ln = shost_priv(shost);
+	memset(ln, 0, sizeof(struct csio_lnode));
+
+	/* Link common lnode to this lnode */
+	ln->dev_num = (shost->host_no << 16);
+
+	shost->can_queue = CSIO_MAX_QUEUE;
+	shost->this_id = -1;
+	shost->unique_id = shost->host_no;
+	shost->max_cmd_len = 16; /* Max CDB length supported */
+	shost->max_id = min_t(uint32_t, csio_fcoe_rnodes,
+			      hw->fres_info.max_ssns);
+	shost->max_lun = CSIO_MAX_LUN;
+	if (dev == &hw->pdev->dev)
+		shost->transportt = csio_fcoe_transport;
+	else
+		shost->transportt = csio_fcoe_transport_vport;
+
+	/* root lnode */
+	if (!hw->rln)
+		hw->rln = ln;
+
+	/* Other initialization here: Common, Transport specific */
+	if (csio_lnode_init(ln, hw, pln))
+		goto err_shost_put;
+
+	if (scsi_add_host(shost, dev))
+		goto err_lnode_exit;
+
+	return ln;
+
+err_lnode_exit:
+	csio_lnode_exit(ln);
+err_shost_put:
+	scsi_host_put(shost);
+err:
+	return NULL;
+}
+
+/**
+ * csio_shost_exit - De-instantiate the shost.
+ * @ln:		The lnode module corresponding to the shost.
+ *
+ */
+void
+csio_shost_exit(struct csio_lnode *ln)
+{
+	struct Scsi_Host *shost = csio_ln_to_shost(ln);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	/* Inform transport */
+	fc_remove_host(shost);
+
+	/* Inform SCSI ML */
+	scsi_remove_host(shost);
+
+	/* Flush all the events, so that any rnode removal events
+	 * already queued are all handled, before we remove the lnode.
+	 */
+	spin_lock_irq(&hw->lock);
+	csio_evtq_flush(hw);
+	spin_unlock_irq(&hw->lock);
+
+	csio_lnode_exit(ln);
+	scsi_host_put(shost);
+}
+
+struct csio_lnode *
+csio_lnode_alloc(struct csio_hw *hw)
+{
+	return csio_shost_init(hw, &hw->pdev->dev, false, NULL);
+}
+
+void
+csio_lnodes_block_request(struct csio_hw *hw)
+{
+	struct Scsi_Host  *shost;
+	struct csio_lnode *sln;
+	struct csio_lnode *ln;
+	struct list_head *cur_ln, *cur_cln;
+	struct csio_lnode **lnode_list;
+	int cur_cnt = 0, ii;
+
+	lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns),
+			GFP_KERNEL);
+	if (!lnode_list) {
+		csio_err(hw, "Failed to allocate lnodes_list");
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+	/* Traverse sibling lnodes */
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+		lnode_list[cur_cnt++] = sln;
+
+		/* Traverse children lnodes */
+		list_for_each(cur_cln, &sln->cln_head)
+			lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "Blocking IOs on lnode: %p\n", lnode_list[ii]);
+		ln = lnode_list[ii];
+		shost = csio_ln_to_shost(ln);
+		scsi_block_requests(shost);
+
+	}
+	kfree(lnode_list);
+}
+
+void
+csio_lnodes_unblock_request(struct csio_hw *hw)
+{
+	struct csio_lnode *ln;
+	struct Scsi_Host  *shost;
+	struct csio_lnode *sln;
+	struct list_head *cur_ln, *cur_cln;
+	struct csio_lnode **lnode_list;
+	int cur_cnt = 0, ii;
+
+	lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns),
+			GFP_KERNEL);
+	if (!lnode_list) {
+		csio_err(hw, "Failed to allocate lnodes_list");
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+	/* Traverse sibling lnodes */
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+		lnode_list[cur_cnt++] = sln;
+
+		/* Traverse children lnodes */
+		list_for_each(cur_cln, &sln->cln_head)
+			lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "unblocking IOs on lnode: %p\n", lnode_list[ii]);
+		ln = lnode_list[ii];
+		shost = csio_ln_to_shost(ln);
+		scsi_unblock_requests(shost);
+	}
+	kfree(lnode_list);
+}
+
+void
+csio_lnodes_block_by_port(struct csio_hw *hw, uint8_t portid)
+{
+	struct csio_lnode *ln;
+	struct Scsi_Host  *shost;
+	struct csio_lnode *sln;
+	struct list_head *cur_ln, *cur_cln;
+	struct csio_lnode **lnode_list;
+	int cur_cnt = 0, ii;
+
+	lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns),
+			GFP_KERNEL);
+	if (!lnode_list) {
+		csio_err(hw, "Failed to allocate lnodes_list");
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+	/* Traverse sibling lnodes */
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+		if (sln->portid != portid)
+			continue;
+
+		lnode_list[cur_cnt++] = sln;
+
+		/* Traverse children lnodes */
+		list_for_each(cur_cln, &sln->cln_head)
+			lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "Blocking IOs on lnode: %p\n", lnode_list[ii]);
+		ln = lnode_list[ii];
+		shost = csio_ln_to_shost(ln);
+		scsi_block_requests(shost);
+	}
+	kfree(lnode_list);
+}
+
+void
+csio_lnodes_unblock_by_port(struct csio_hw *hw, uint8_t portid)
+{
+	struct csio_lnode *ln;
+	struct Scsi_Host  *shost;
+	struct csio_lnode *sln;
+	struct list_head *cur_ln, *cur_cln;
+	struct csio_lnode **lnode_list;
+	int cur_cnt = 0, ii;
+
+	lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns),
+			GFP_KERNEL);
+	if (!lnode_list) {
+		csio_err(hw, "Failed to allocate lnodes_list");
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+	/* Traverse sibling lnodes */
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+		if (sln->portid != portid)
+			continue;
+		lnode_list[cur_cnt++] = sln;
+
+		/* Traverse children lnodes */
+		list_for_each(cur_cln, &sln->cln_head)
+			lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "unblocking IOs on lnode: %p\n", lnode_list[ii]);
+		ln = lnode_list[ii];
+		shost = csio_ln_to_shost(ln);
+		scsi_unblock_requests(shost);
+	}
+	kfree(lnode_list);
+}
+
+void
+csio_lnodes_exit(struct csio_hw *hw, bool npiv)
+{
+	struct csio_lnode *sln;
+	struct csio_lnode *ln;
+	struct list_head *cur_ln, *cur_cln;
+	struct csio_lnode **lnode_list;
+	int cur_cnt = 0, ii;
+
+	lnode_list = kzalloc((sizeof(struct csio_lnode *) * hw->num_lns),
+			GFP_KERNEL);
+	if (!lnode_list) {
+		csio_err(hw, "lnodes_exit: Failed to allocate lnodes_list.\n");
+		return;
+	}
+
+	/* Get all child lnodes(NPIV ports) */
+	spin_lock_irq(&hw->lock);
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+
+		/* Traverse children lnodes */
+		list_for_each(cur_cln, &sln->cln_head)
+			lnode_list[cur_cnt++] = (struct csio_lnode *) cur_cln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	/* Delete NPIV lnodes */
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "Deleting child lnode: %p\n", lnode_list[ii]);
+		ln = lnode_list[ii];
+		fc_vport_terminate(ln->fc_vport);
+	}
+
+	/* Delete only npiv lnodes */
+	if (npiv)
+		goto free_lnodes;
+
+	cur_cnt = 0;
+	/* Get all physical lnodes */
+	spin_lock_irq(&hw->lock);
+	/* Traverse sibling lnodes */
+	list_for_each(cur_ln, &hw->sln_head) {
+		sln = (struct csio_lnode *) cur_ln;
+		lnode_list[cur_cnt++] = sln;
+	}
+	spin_unlock_irq(&hw->lock);
+
+	/* Delete physical lnodes */
+	for (ii = 0; ii < cur_cnt; ii++) {
+		csio_dbg(hw, "Deleting parent lnode: %p\n", lnode_list[ii]);
+		csio_shost_exit(lnode_list[ii]);
+	}
+
+free_lnodes:
+	kfree(lnode_list);
+}
+
+/*
+ * csio_lnode_init_post: Set lnode attributes after starting HW.
+ * @ln: lnode.
+ *
+ */
+static void
+csio_lnode_init_post(struct csio_lnode *ln)
+{
+	struct Scsi_Host  *shost = csio_ln_to_shost(ln);
+
+	csio_fchost_attr_init(ln);
+
+	scsi_scan_host(shost);
+}
+
+/*
+ * csio_probe_one - Instantiate this function.
+ * @pdev: PCI device
+ * @id: Device ID
+ *
+ * This is the .probe() callback of the driver. This function:
+ * - Initializes the PCI function by enabling MMIO, setting bus
+ *   mastership and setting DMA mask.
+ * - Allocates HW structure, DMA, memory resources, maps BARS to
+ *   host memory and initializes HW module.
+ * - Allocates lnode structure via scsi_host_alloc, initializes
+ *   shost, initialized lnode module and registers with SCSI ML
+ *   via scsi_host_add.
+ * - Enables interrupts, and starts the chip by kicking off the
+ *   HW state machine.
+ * - Once hardware is ready, initiated scan of the host via
+ *   scsi_scan_host.
+ */
+static int __devinit
+csio_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int rv;
+	int bars;
+	int i;
+	struct csio_hw *hw;
+	struct csio_lnode *ln;
+
+	rv = csio_pci_init(pdev, &bars);
+	if (rv)
+		goto err;
+
+	hw = csio_hw_alloc(pdev);
+	if (!hw) {
+		rv = -ENODEV;
+		goto err_pci_exit;
+	}
+
+	pci_set_drvdata(pdev, hw);
+
+	if (csio_hw_start(hw) != 0) {
+		dev_err(&pdev->dev,
+			"Failed to start FW, continuing in debug mode.\n");
+		return 0;
+	}
+
+	sprintf(hw->fwrev_str, "%u.%u.%u.%u\n",
+		    FW_HDR_FW_VER_MAJOR_GET(hw->fwrev),
+		    FW_HDR_FW_VER_MINOR_GET(hw->fwrev),
+		    FW_HDR_FW_VER_MICRO_GET(hw->fwrev),
+		    FW_HDR_FW_VER_BUILD_GET(hw->fwrev));
+
+	for (i = 0; i < hw->num_pports; i++) {
+		ln = csio_shost_init(hw, &pdev->dev, true, NULL);
+		if (!ln) {
+			rv = -ENODEV;
+			break;
+		}
+		/* Initialize portid */
+		ln->portid = hw->pport[i].portid;
+
+		spin_lock_irq(&hw->lock);
+		if (csio_lnode_start(ln) != 0)
+			rv = -ENODEV;
+		spin_unlock_irq(&hw->lock);
+
+		if (rv)
+			break;
+
+		csio_lnode_init_post(ln);
+	}
+
+	if (rv)
+		goto err_lnode_exit;
+
+	return 0;
+
+err_lnode_exit:
+	csio_lnodes_block_request(hw);
+	spin_lock_irq(&hw->lock);
+	csio_hw_stop(hw);
+	spin_unlock_irq(&hw->lock);
+	csio_lnodes_unblock_request(hw);
+	pci_set_drvdata(hw->pdev, NULL);
+	csio_lnodes_exit(hw, 0);
+	csio_hw_free(hw);
+err_pci_exit:
+	csio_pci_exit(pdev, &bars);
+err:
+	dev_err(&pdev->dev, "probe of device failed: %d\n", rv);
+	return rv;
+}
+
+/*
+ * csio_remove_one - Remove one instance of the driver at this PCI function.
+ * @pdev: PCI device
+ *
+ * Used during hotplug operation.
+ */
+static void __devexit
+csio_remove_one(struct pci_dev *pdev)
+{
+	struct csio_hw *hw = pci_get_drvdata(pdev);
+	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
+
+	csio_lnodes_block_request(hw);
+	spin_lock_irq(&hw->lock);
+
+	/* Stops lnode, Rnode s/m
+	 * Quiesce IOs.
+	 * All sessions with remote ports are unregistered.
+	 */
+	csio_hw_stop(hw);
+	spin_unlock_irq(&hw->lock);
+	csio_lnodes_unblock_request(hw);
+
+	csio_lnodes_exit(hw, 0);
+	csio_hw_free(hw);
+	pci_set_drvdata(pdev, NULL);
+	csio_pci_exit(pdev, &bars);
+}
+
+/*
+ * csio_pci_error_detected - PCI error was detected
+ * @pdev: PCI device
+ *
+ */
+static pci_ers_result_t
+csio_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct csio_hw *hw = pci_get_drvdata(pdev);
+
+	csio_lnodes_block_request(hw);
+	spin_lock_irq(&hw->lock);
+
+	/* Post PCI error detected evt to HW s/m
+	 * HW s/m handles this evt by quiescing IOs, unregisters rports
+	 * and finally takes the device to offline.
+	 */
+	csio_post_event(&hw->sm, CSIO_HWE_PCIERR_DETECTED);
+	spin_unlock_irq(&hw->lock);
+	csio_lnodes_unblock_request(hw);
+	csio_lnodes_exit(hw, 0);
+	csio_intr_disable(hw, true);
+	pci_disable_device(pdev);
+	return state == pci_channel_io_perm_failure ?
+		PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
+}
+
+/*
+ * csio_pci_slot_reset - PCI slot has been reset.
+ * @pdev: PCI device
+ *
+ */
+static pci_ers_result_t
+csio_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct csio_hw *hw = pci_get_drvdata(pdev);
+	int ready;
+
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "cannot re-enable device in slot reset\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+	pci_restore_state(pdev);
+	pci_save_state(pdev);
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	/* Bring HW s/m to ready state.
+	 * but don't resume IOs.
+	 */
+	spin_lock_irq(&hw->lock);
+	csio_post_event(&hw->sm, CSIO_HWE_PCIERR_SLOT_RESET);
+	ready = csio_is_hw_ready(hw);
+	spin_unlock_irq(&hw->lock);
+
+	if (ready) {
+		return PCI_ERS_RESULT_RECOVERED;
+	} else {
+		dev_err(&pdev->dev, "Can't initialize HW when in slot reset\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+}
+
+/*
+ * csio_pci_resume - Resume normal operations
+ * @pdev: PCI device
+ *
+ */
+static void
+csio_pci_resume(struct pci_dev *pdev)
+{
+	struct csio_hw *hw = pci_get_drvdata(pdev);
+	struct csio_lnode *ln;
+	int rv = 0;
+	int i;
+
+	/* Bring the LINK UP and Resume IO */
+
+	for (i = 0; i < hw->num_pports; i++) {
+		ln = csio_shost_init(hw, &pdev->dev, true, NULL);
+		if (!ln) {
+			rv = -ENODEV;
+			break;
+		}
+		/* Initialize portid */
+		ln->portid = hw->pport[i].portid;
+
+		spin_lock_irq(&hw->lock);
+		if (csio_lnode_start(ln) != 0)
+			rv = -ENODEV;
+		spin_unlock_irq(&hw->lock);
+
+		if (rv)
+			break;
+
+		csio_lnode_init_post(ln);
+	}
+
+	if (rv)
+		goto err_resume_exit;
+
+	return;
+
+err_resume_exit:
+	csio_lnodes_block_request(hw);
+	spin_lock_irq(&hw->lock);
+	csio_hw_stop(hw);
+	spin_unlock_irq(&hw->lock);
+	csio_lnodes_unblock_request(hw);
+	csio_lnodes_exit(hw, 0);
+	csio_hw_free(hw);
+	dev_err(&pdev->dev, "resume of device failed: %d\n", rv);
+}
+
+static struct pci_error_handlers csio_err_handler = {
+	.error_detected = csio_pci_error_detected,
+	.slot_reset	= csio_pci_slot_reset,
+	.resume		= csio_pci_resume,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(csio_pci_tbl) = {
+	CSIO_DEVICE(CSIO_DEVID_T440DBG_FCOE, 0),	/* T440DBG FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T420CR_FCOE, 0),		/* T420CR FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T422CR_FCOE, 0),		/* T422CR FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T440CR_FCOE, 0),		/* T440CR FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T420BCH_FCOE, 0),	/* T420BCH FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T440BCH_FCOE, 0),	/* T440BCH FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T440CH_FCOE, 0),		/* T440CH FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T420SO_FCOE, 0),		/* T420SO FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T420CX_FCOE, 0),		/* T420CX FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T420BT_FCOE, 0),		/* T420BT FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T404BT_FCOE, 0),		/* T404BT FCOE */
+	CSIO_DEVICE(CSIO_DEVID_B420_FCOE, 0),		/* B420 FCOE */
+	CSIO_DEVICE(CSIO_DEVID_B404_FCOE, 0),		/* B404 FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T480CR_FCOE, 0),		/* T480 CR FCOE */
+	CSIO_DEVICE(CSIO_DEVID_T440LPCR_FCOE, 0),	/* T440 LP-CR FCOE */
+	CSIO_DEVICE(CSIO_DEVID_PE10K, 0),		/* PE10K FCOE */
+	CSIO_DEVICE(CSIO_DEVID_PE10K_PF1, 0),	/* PE10K FCOE on PF1 */
+	{ 0, 0, 0, 0, 0, 0, 0 }
+};
+
+
+static struct pci_driver csio_pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.driver		= {
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= csio_pci_tbl,
+	.probe		= csio_probe_one,
+	.remove		= csio_remove_one,
+	.err_handler	= &csio_err_handler,
+};
+
+/*
+ * csio_init - Chelsio storage driver initialization function.
+ *
+ */
+static int __init
+csio_init(void)
+{
+	int rv = -ENOMEM;
+
+	pr_info("%s %s\n", CSIO_DRV_DESC, CSIO_DRV_VERSION);
+
+	csio_dfs_init();
+
+	csio_fcoe_transport = fc_attach_transport(&csio_fc_transport_funcs);
+	if (!csio_fcoe_transport)
+		goto err;
+
+	csio_fcoe_transport_vport =
+			fc_attach_transport(&csio_fc_transport_vport_funcs);
+	if (!csio_fcoe_transport_vport)
+		goto err_vport;
+
+	rv = pci_register_driver(&csio_pci_driver);
+	if (rv)
+		goto err_pci;
+
+	return 0;
+
+err_pci:
+	fc_release_transport(csio_fcoe_transport_vport);
+err_vport:
+	fc_release_transport(csio_fcoe_transport);
+err:
+	csio_dfs_exit();
+	return rv;
+}
+
+/*
+ * csio_exit - Chelsio storage driver uninitialization .
+ *
+ * Function that gets called in the unload path.
+ */
+static void __exit
+csio_exit(void)
+{
+	pci_unregister_driver(&csio_pci_driver);
+	csio_dfs_exit();
+	fc_release_transport(csio_fcoe_transport_vport);
+	fc_release_transport(csio_fcoe_transport);
+}
+
+module_init(csio_init);
+module_exit(csio_exit);
+MODULE_AUTHOR(CSIO_DRV_AUTHOR);
+MODULE_DESCRIPTION(CSIO_DRV_DESC);
+MODULE_LICENSE(CSIO_DRV_LICENSE);
+MODULE_DEVICE_TABLE(pci, csio_pci_tbl);
+MODULE_VERSION(CSIO_DRV_VERSION);
+MODULE_FIRMWARE(CSIO_FW_FNAME);
diff --git a/drivers/scsi/csiostor/csio_init.h b/drivers/scsi/csiostor/csio_init.h
new file mode 100644
index 0000000..0838fd7
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_init.h
@@ -0,0 +1,158 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_INIT_H__
+#define __CSIO_INIT_H__
+
+#include <linux/pci.h>
+#include <linux/if_ether.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_fc.h>
+
+#include "csio_scsi.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+#include "csio_hw.h"
+
+#define CSIO_DRV_AUTHOR			"Chelsio Communications"
+#define CSIO_DRV_LICENSE		"Dual BSD/GPL"
+#define CSIO_DRV_DESC			"Chelsio FCoE driver"
+#define CSIO_DRV_VERSION		"1.0.0"
+
+#define CSIO_DEVICE(devid, idx)					\
+{ PCI_VENDOR_ID_CHELSIO, (devid), PCI_ANY_ID, PCI_ANY_ID, 0, 0, (idx) }
+
+#define CSIO_IS_T4_FPGA(_dev)		(((_dev) == CSIO_DEVID_PE10K) ||\
+					 ((_dev) == CSIO_DEVID_PE10K_PF1))
+
+/* FCoE device IDs */
+#define CSIO_DEVID_PE10K		0xA000
+#define CSIO_DEVID_PE10K_PF1		0xA001
+#define CSIO_DEVID_T440DBG_FCOE		0x4600
+#define CSIO_DEVID_T420CR_FCOE		0x4601
+#define CSIO_DEVID_T422CR_FCOE		0x4602
+#define CSIO_DEVID_T440CR_FCOE		0x4603
+#define CSIO_DEVID_T420BCH_FCOE		0x4604
+#define CSIO_DEVID_T440BCH_FCOE		0x4605
+#define CSIO_DEVID_T440CH_FCOE		0x4606
+#define CSIO_DEVID_T420SO_FCOE		0x4607
+#define CSIO_DEVID_T420CX_FCOE		0x4608
+#define CSIO_DEVID_T420BT_FCOE		0x4609
+#define CSIO_DEVID_T404BT_FCOE		0x460A
+#define CSIO_DEVID_B420_FCOE		0x460B
+#define CSIO_DEVID_B404_FCOE		0x460C
+#define CSIO_DEVID_T480CR_FCOE		0x460D
+#define CSIO_DEVID_T440LPCR_FCOE	0x460E
+
+extern struct fc_function_template csio_fc_transport_funcs;
+extern struct fc_function_template csio_fc_transport_vport_funcs;
+
+void csio_fchost_attr_init(struct csio_lnode *);
+
+/* INTx handlers */
+void csio_scsi_intx_handler(struct csio_hw *, void *, uint32_t,
+			       struct csio_fl_dma_buf *, void *);
+
+void csio_fwevt_intx_handler(struct csio_hw *, void *, uint32_t,
+				struct csio_fl_dma_buf *, void *);
+
+/* Common os lnode APIs */
+void csio_lnodes_block_request(struct csio_hw *);
+void csio_lnodes_unblock_request(struct csio_hw *);
+void csio_lnodes_block_by_port(struct csio_hw *, uint8_t);
+void csio_lnodes_unblock_by_port(struct csio_hw *, uint8_t);
+
+struct csio_lnode *csio_shost_init(struct csio_hw *, struct device *, bool,
+					struct csio_lnode *);
+void csio_shost_exit(struct csio_lnode *);
+void csio_lnodes_exit(struct csio_hw *, bool);
+
+static inline struct Scsi_Host *
+csio_ln_to_shost(struct csio_lnode *ln)
+{
+	return container_of((void *)ln, struct Scsi_Host, hostdata[0]);
+}
+
+/* SCSI -- locking version of get/put ioreqs  */
+static inline struct csio_ioreq *
+csio_get_scsi_ioreq_lock(struct csio_hw *hw, struct csio_scsim *scsim)
+{
+	struct csio_ioreq *ioreq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scsim->freelist_lock, flags);
+	ioreq = csio_get_scsi_ioreq(scsim);
+	spin_unlock_irqrestore(&scsim->freelist_lock, flags);
+
+	return ioreq;
+}
+
+static inline void
+csio_put_scsi_ioreq_lock(struct csio_hw *hw, struct csio_scsim *scsim,
+			 struct csio_ioreq *ioreq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&scsim->freelist_lock, flags);
+	csio_put_scsi_ioreq(scsim, ioreq);
+	spin_unlock_irqrestore(&scsim->freelist_lock, flags);
+}
+
+/* Called in interrupt context */
+static inline void
+csio_put_scsi_ioreq_list_lock(struct csio_hw *hw, struct csio_scsim *scsim,
+			      struct list_head *reqlist, int n)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&scsim->freelist_lock, flags);
+	csio_put_scsi_ioreq_list(scsim, reqlist, n);
+	spin_unlock_irqrestore(&scsim->freelist_lock, flags);
+}
+
+/* Called in interrupt context */
+static inline void
+csio_put_scsi_ddp_list_lock(struct csio_hw *hw, struct csio_scsim *scsim,
+			      struct list_head *reqlist, int n)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	csio_put_scsi_ddp_list(scsim, reqlist, n);
+	spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+#endif /* ifndef __CSIO_INIT_H__ */
diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
new file mode 100644
index 0000000..7ee9777
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_isr.c
@@ -0,0 +1,624 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+
+#include "csio_init.h"
+#include "csio_hw.h"
+
+static irqreturn_t
+csio_nondata_isr(int irq, void *dev_id)
+{
+	struct csio_hw *hw = (struct csio_hw *) dev_id;
+	int rv;
+	unsigned long flags;
+
+	if (unlikely(!hw))
+		return IRQ_NONE;
+
+	if (unlikely(pci_channel_offline(hw->pdev))) {
+		CSIO_INC_STATS(hw, n_pcich_offline);
+		return IRQ_NONE;
+	}
+
+	spin_lock_irqsave(&hw->lock, flags);
+	csio_hw_slow_intr_handler(hw);
+	rv = csio_mb_isr_handler(hw);
+
+	if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) {
+		hw->flags |= CSIO_HWF_FWEVT_PENDING;
+		spin_unlock_irqrestore(&hw->lock, flags);
+		schedule_work(&hw->evtq_work);
+		return IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * csio_fwevt_handler - Common FW event handler routine.
+ * @hw: HW module.
+ *
+ * This is the ISR for FW events. It is shared b/w MSIX
+ * and INTx handlers.
+ */
+static void
+csio_fwevt_handler(struct csio_hw *hw)
+{
+	int rv;
+	unsigned long flags;
+
+	rv = csio_fwevtq_handler(hw);
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) {
+		hw->flags |= CSIO_HWF_FWEVT_PENDING;
+		spin_unlock_irqrestore(&hw->lock, flags);
+		schedule_work(&hw->evtq_work);
+		return;
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+} /* csio_fwevt_handler */
+
+/*
+ * csio_fwevt_isr() - FW events MSIX ISR
+ * @irq:
+ * @dev_id:
+ *
+ * Process WRs on the FW event queue.
+ *
+ */
+static irqreturn_t
+csio_fwevt_isr(int irq, void *dev_id)
+{
+	struct csio_hw *hw = (struct csio_hw *) dev_id;
+
+	if (unlikely(!hw))
+		return IRQ_NONE;
+
+	if (unlikely(pci_channel_offline(hw->pdev))) {
+		CSIO_INC_STATS(hw, n_pcich_offline);
+		return IRQ_NONE;
+	}
+
+	csio_fwevt_handler(hw);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * csio_fwevt_isr() - INTx wrapper for handling FW events.
+ * @irq:
+ * @dev_id:
+ */
+void
+csio_fwevt_intx_handler(struct csio_hw *hw, void *wr, uint32_t len,
+			   struct csio_fl_dma_buf *flb, void *priv)
+{
+	csio_fwevt_handler(hw);
+} /* csio_fwevt_intx_handler */
+
+/*
+ * csio_process_scsi_cmpl - Process a SCSI WR completion.
+ * @hw: HW module.
+ * @wr: The completed WR from the ingress queue.
+ * @len: Length of the WR.
+ * @flb: Freelist buffer array.
+ *
+ */
+static void
+csio_process_scsi_cmpl(struct csio_hw *hw, void *wr, uint32_t len,
+			struct csio_fl_dma_buf *flb, void *cbfn_q)
+{
+	struct csio_ioreq *ioreq;
+	uint8_t *scsiwr;
+	uint8_t subop;
+	void *cmnd;
+	unsigned long flags;
+
+	ioreq = csio_scsi_cmpl_handler(hw, wr, len, flb, NULL, &scsiwr);
+	if (likely(ioreq)) {
+		if (unlikely(*scsiwr == FW_SCSI_ABRT_CLS_WR)) {
+			subop = FW_SCSI_ABRT_CLS_WR_SUB_OPCODE_GET(
+					((struct fw_scsi_abrt_cls_wr *)
+					    scsiwr)->sub_opcode_to_chk_all_io);
+
+			csio_dbg(hw, "%s cmpl recvd ioreq:%p status:%d\n",
+				    subop ? "Close" : "Abort",
+				    ioreq, ioreq->wr_status);
+
+			spin_lock_irqsave(&hw->lock, flags);
+			if (subop)
+				csio_scsi_closed(ioreq,
+						 (struct list_head *)cbfn_q);
+			else
+				csio_scsi_aborted(ioreq,
+						  (struct list_head *)cbfn_q);
+			/*
+			 * We call scsi_done for I/Os that driver thinks aborts
+			 * have timed out. If there is a race caused by FW
+			 * completing abort at the exact same time that the
+			 * driver has deteced the abort timeout, the following
+			 * check prevents calling of scsi_done twice for the
+			 * same command: once from the eh_abort_handler, another
+			 * from csio_scsi_isr_handler(). This also avoids the
+			 * need to check if csio_scsi_cmnd(req) is NULL in the
+			 * fast path.
+			 */
+			cmnd = csio_scsi_cmnd(ioreq);
+			if (unlikely(cmnd == NULL))
+				list_del_init(&ioreq->sm.sm_list);
+
+			spin_unlock_irqrestore(&hw->lock, flags);
+
+			if (unlikely(cmnd == NULL))
+				csio_put_scsi_ioreq_lock(hw,
+						csio_hw_to_scsim(hw), ioreq);
+		} else {
+			spin_lock_irqsave(&hw->lock, flags);
+			csio_scsi_completed(ioreq, (struct list_head *)cbfn_q);
+			spin_unlock_irqrestore(&hw->lock, flags);
+		}
+	}
+}
+
+/*
+ * csio_scsi_isr_handler() - Common SCSI ISR handler.
+ * @iq: Ingress queue pointer.
+ *
+ * Processes SCSI completions on the SCSI IQ indicated by scm->iq_idx
+ * by calling csio_wr_process_iq_idx. If there are completions on the
+ * isr_cbfn_q, yank them out into a local queue and call their io_cbfns.
+ * Once done, add these completions onto the freelist.
+ * This routine is shared b/w MSIX and INTx.
+ */
+static inline irqreturn_t
+csio_scsi_isr_handler(struct csio_q *iq)
+{
+	struct csio_hw *hw = (struct csio_hw *)iq->owner;
+	LIST_HEAD(cbfn_q);
+	struct list_head *tmp;
+	struct csio_scsim *scm;
+	struct csio_ioreq *ioreq;
+	int isr_completions = 0;
+
+	scm = csio_hw_to_scsim(hw);
+
+	if (unlikely(csio_wr_process_iq(hw, iq, csio_process_scsi_cmpl,
+					&cbfn_q) != 0))
+		return IRQ_NONE;
+
+	/* Call back the completion routines */
+	list_for_each(tmp, &cbfn_q) {
+		ioreq = (struct csio_ioreq *)tmp;
+		isr_completions++;
+		ioreq->io_cbfn(hw, ioreq);
+		/* Release ddp buffer if used for this req */
+		if (unlikely(ioreq->dcopy))
+			csio_put_scsi_ddp_list_lock(hw, scm, &ioreq->gen_list,
+						    ioreq->nsge);
+	}
+
+	if (isr_completions) {
+		/* Return the ioreqs back to ioreq->freelist */
+		csio_put_scsi_ioreq_list_lock(hw, scm, &cbfn_q,
+					      isr_completions);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * csio_scsi_isr() - SCSI MSIX handler
+ * @irq:
+ * @dev_id:
+ *
+ * This is the top level SCSI MSIX handler. Calls csio_scsi_isr_handler()
+ * for handling SCSI completions.
+ */
+static irqreturn_t
+csio_scsi_isr(int irq, void *dev_id)
+{
+	struct csio_q *iq = (struct csio_q *) dev_id;
+	struct csio_hw *hw;
+
+	if (unlikely(!iq))
+		return IRQ_NONE;
+
+	hw = (struct csio_hw *)iq->owner;
+
+	if (unlikely(pci_channel_offline(hw->pdev))) {
+		CSIO_INC_STATS(hw, n_pcich_offline);
+		return IRQ_NONE;
+	}
+
+	csio_scsi_isr_handler(iq);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * csio_scsi_intx_handler() - SCSI INTx handler
+ * @irq:
+ * @dev_id:
+ *
+ * This is the top level SCSI INTx handler. Calls csio_scsi_isr_handler()
+ * for handling SCSI completions.
+ */
+void
+csio_scsi_intx_handler(struct csio_hw *hw, void *wr, uint32_t len,
+			struct csio_fl_dma_buf *flb, void *priv)
+{
+	struct csio_q *iq = priv;
+
+	csio_scsi_isr_handler(iq);
+
+} /* csio_scsi_intx_handler */
+
+/*
+ * csio_fcoe_isr() - INTx/MSI interrupt service routine for FCoE.
+ * @irq:
+ * @dev_id:
+ *
+ *
+ */
+static irqreturn_t
+csio_fcoe_isr(int irq, void *dev_id)
+{
+	struct csio_hw *hw = (struct csio_hw *) dev_id;
+	struct csio_q *intx_q = NULL;
+	int rv;
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long flags;
+
+	if (unlikely(!hw))
+		return IRQ_NONE;
+
+	if (unlikely(pci_channel_offline(hw->pdev))) {
+		CSIO_INC_STATS(hw, n_pcich_offline);
+		return IRQ_NONE;
+	}
+
+	/* Disable the interrupt for this PCI function. */
+	if (hw->intr_mode == CSIO_IM_INTX)
+		csio_wr_reg32(hw, 0, MYPF_REG(PCIE_PF_CLI));
+
+	/*
+	 * The read in the following function will flush the
+	 * above write.
+	 */
+	if (csio_hw_slow_intr_handler(hw))
+		ret = IRQ_HANDLED;
+
+	/* Get the INTx Forward interrupt IQ. */
+	intx_q = csio_get_q(hw, hw->intr_iq_idx);
+
+	CSIO_DB_ASSERT(intx_q);
+
+	/* IQ handler is not possible for intx_q, hence pass in NULL */
+	if (likely(csio_wr_process_iq(hw, intx_q, NULL, NULL) == 0))
+		ret = IRQ_HANDLED;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	rv = csio_mb_isr_handler(hw);
+	if (rv == 0 && !(hw->flags & CSIO_HWF_FWEVT_PENDING)) {
+		hw->flags |= CSIO_HWF_FWEVT_PENDING;
+		spin_unlock_irqrestore(&hw->lock, flags);
+		schedule_work(&hw->evtq_work);
+		return IRQ_HANDLED;
+	}
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	return ret;
+}
+
+static void
+csio_add_msix_desc(struct csio_hw *hw)
+{
+	int i;
+	struct csio_msix_entries *entryp = &hw->msix_entries[0];
+	int k = CSIO_EXTRA_VECS;
+	int len = sizeof(entryp->desc) - 1;
+	int cnt = hw->num_sqsets + k;
+
+	/* Non-data vector */
+	memset(entryp->desc, 0, len + 1);
+	snprintf(entryp->desc, len, "csio-%02x:%02x:%x-nondata",
+		 CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw), CSIO_PCI_FUNC(hw));
+
+	entryp++;
+	memset(entryp->desc, 0, len + 1);
+	snprintf(entryp->desc, len, "csio-%02x:%02x:%x-fwevt",
+		 CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw), CSIO_PCI_FUNC(hw));
+	entryp++;
+
+	/* Name SCSI vecs */
+	for (i = k; i < cnt; i++, entryp++) {
+		memset(entryp->desc, 0, len + 1);
+		snprintf(entryp->desc, len, "csio-%02x:%02x:%x-scsi%d",
+			 CSIO_PCI_BUS(hw), CSIO_PCI_DEV(hw),
+			 CSIO_PCI_FUNC(hw), i - CSIO_EXTRA_VECS);
+	}
+}
+
+int
+csio_request_irqs(struct csio_hw *hw)
+{
+	int rv, i, j, k = 0;
+	struct csio_msix_entries *entryp = &hw->msix_entries[0];
+	struct csio_scsi_cpu_info *info;
+
+	if (hw->intr_mode != CSIO_IM_MSIX) {
+		rv = request_irq(hw->pdev->irq, csio_fcoe_isr,
+					(hw->intr_mode == CSIO_IM_MSI) ?
+							0 : IRQF_SHARED,
+					KBUILD_MODNAME, hw);
+		if (rv) {
+			if (hw->intr_mode == CSIO_IM_MSI)
+				pci_disable_msi(hw->pdev);
+			csio_err(hw, "Failed to allocate interrupt line.\n");
+			return -EINVAL;
+		}
+
+		goto out;
+	}
+
+	/* Add the MSIX vector descriptions */
+	csio_add_msix_desc(hw);
+
+	rv = request_irq(entryp[k].vector, csio_nondata_isr, 0,
+			 entryp[k].desc, hw);
+	if (rv) {
+		csio_err(hw, "IRQ request failed for vec %d err:%d\n",
+			 entryp[k].vector, rv);
+		goto err;
+	}
+
+	entryp[k++].dev_id = (void *)hw;
+
+	rv = request_irq(entryp[k].vector, csio_fwevt_isr, 0,
+			 entryp[k].desc, hw);
+	if (rv) {
+		csio_err(hw, "IRQ request failed for vec %d err:%d\n",
+			 entryp[k].vector, rv);
+		goto err;
+	}
+
+	entryp[k++].dev_id = (void *)hw;
+
+	/* Allocate IRQs for SCSI */
+	for (i = 0; i < hw->num_pports; i++) {
+		info = &hw->scsi_cpu_info[i];
+		for (j = 0; j < info->max_cpus; j++, k++) {
+			struct csio_scsi_qset *sqset = &hw->sqset[i][j];
+			struct csio_q *q = hw->wrm.q_arr[sqset->iq_idx];
+
+			rv = request_irq(entryp[k].vector, csio_scsi_isr, 0,
+					 entryp[k].desc, q);
+			if (rv) {
+				csio_err(hw,
+				       "IRQ request failed for vec %d err:%d\n",
+				       entryp[k].vector, rv);
+				goto err;
+			}
+
+			entryp[k].dev_id = (void *)q;
+
+		} /* for all scsi cpus */
+	} /* for all ports */
+
+out:
+	hw->flags |= CSIO_HWF_HOST_INTR_ENABLED;
+
+	return 0;
+
+err:
+	for (i = 0; i < k; i++) {
+		entryp = &hw->msix_entries[i];
+		free_irq(entryp->vector, entryp->dev_id);
+	}
+	pci_disable_msix(hw->pdev);
+
+	return -EINVAL;
+}
+
+static void
+csio_disable_msix(struct csio_hw *hw, bool free)
+{
+	int i;
+	struct csio_msix_entries *entryp;
+	int cnt = hw->num_sqsets + CSIO_EXTRA_VECS;
+
+	if (free) {
+		for (i = 0; i < cnt; i++) {
+			entryp = &hw->msix_entries[i];
+			free_irq(entryp->vector, entryp->dev_id);
+		}
+	}
+	pci_disable_msix(hw->pdev);
+}
+
+/* Reduce per-port max possible CPUs */
+static void
+csio_reduce_sqsets(struct csio_hw *hw, int cnt)
+{
+	int i;
+	struct csio_scsi_cpu_info *info;
+
+	while (cnt < hw->num_sqsets) {
+		for (i = 0; i < hw->num_pports; i++) {
+			info = &hw->scsi_cpu_info[i];
+			if (info->max_cpus > 1) {
+				info->max_cpus--;
+				hw->num_sqsets--;
+				if (hw->num_sqsets <= cnt)
+					break;
+			}
+		}
+	}
+
+	csio_dbg(hw, "Reduced sqsets to %d\n", hw->num_sqsets);
+}
+
+static int
+csio_enable_msix(struct csio_hw *hw)
+{
+	int rv, i, j, k, n, min, cnt;
+	struct csio_msix_entries *entryp;
+	struct msix_entry *entries;
+	int extra = CSIO_EXTRA_VECS;
+	struct csio_scsi_cpu_info *info;
+
+	min = hw->num_pports + extra;
+	cnt = hw->num_sqsets + extra;
+
+	/* Max vectors required based on #niqs configured in fw */
+	if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS || !csio_is_hw_master(hw))
+		cnt = min_t(uint8_t, hw->cfg_niq, cnt);
+
+	entries = kzalloc(sizeof(struct msix_entry) * cnt, GFP_KERNEL);
+	if (!entries)
+		return -ENOMEM;
+
+	for (i = 0; i < cnt; i++)
+		entries[i].entry = (uint16_t)i;
+
+	csio_dbg(hw, "FW supp #niq:%d, trying %d msix's\n", hw->cfg_niq, cnt);
+
+	while ((rv = pci_enable_msix(hw->pdev, entries, cnt)) >= min)
+		cnt = rv;
+	if (!rv) {
+		if (cnt < (hw->num_sqsets + extra)) {
+			csio_dbg(hw, "Reducing sqsets to %d\n", cnt - extra);
+			csio_reduce_sqsets(hw, cnt - extra);
+		}
+	} else {
+		if (rv > 0) {
+			pci_disable_msix(hw->pdev);
+			csio_info(hw, "Not using MSI-X, remainder:%d\n", rv);
+		}
+
+		kfree(entries);
+		return -ENOMEM;
+	}
+
+	/* Save off vectors */
+	for (i = 0; i < cnt; i++) {
+		entryp = &hw->msix_entries[i];
+		entryp->vector = entries[i].vector;
+	}
+
+	/* Distribute vectors */
+	k = 0;
+	csio_set_nondata_intr_idx(hw, entries[k].entry);
+	csio_set_mb_intr_idx(csio_hw_to_mbm(hw), entries[k++].entry);
+	csio_set_fwevt_intr_idx(hw, entries[k++].entry);
+
+	for (i = 0; i < hw->num_pports; i++) {
+		info = &hw->scsi_cpu_info[i];
+
+		for (j = 0; j < hw->num_scsi_msix_cpus; j++) {
+			n = (j % info->max_cpus) +  k;
+			hw->sqset[i][j].intr_idx = entries[n].entry;
+		}
+
+		k += info->max_cpus;
+	}
+
+	kfree(entries);
+	return 0;
+}
+
+void
+csio_intr_enable(struct csio_hw *hw)
+{
+	hw->intr_mode = CSIO_IM_NONE;
+	hw->flags &= ~CSIO_HWF_HOST_INTR_ENABLED;
+
+	/* Try MSIX, then MSI or fall back to INTx */
+	if ((csio_msi == 2) && !csio_enable_msix(hw))
+		hw->intr_mode = CSIO_IM_MSIX;
+	else {
+		/* Max iqs required based on #niqs configured in fw */
+		if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS ||
+			!csio_is_hw_master(hw)) {
+			int extra = CSIO_EXTRA_MSI_IQS;
+
+			if (hw->cfg_niq < (hw->num_sqsets + extra)) {
+				csio_dbg(hw, "Reducing sqsets to %d\n",
+					 hw->cfg_niq - extra);
+				csio_reduce_sqsets(hw, hw->cfg_niq - extra);
+			}
+		}
+
+		if ((csio_msi == 1) && !pci_enable_msi(hw->pdev))
+			hw->intr_mode = CSIO_IM_MSI;
+		else
+			hw->intr_mode = CSIO_IM_INTX;
+	}
+
+	csio_dbg(hw, "Using %s interrupt mode.\n",
+		(hw->intr_mode == CSIO_IM_MSIX) ? "MSIX" :
+		((hw->intr_mode == CSIO_IM_MSI) ? "MSI" : "INTx"));
+}
+
+void
+csio_intr_disable(struct csio_hw *hw, bool free)
+{
+	csio_hw_intr_disable(hw);
+
+	switch (hw->intr_mode) {
+	case CSIO_IM_MSIX:
+		csio_disable_msix(hw, free);
+		break;
+	case CSIO_IM_MSI:
+		if (free)
+			free_irq(hw->pdev->irq, hw);
+		pci_disable_msi(hw->pdev);
+		break;
+	case CSIO_IM_INTX:
+		if (free)
+			free_irq(hw->pdev->irq, hw);
+		break;
+	default:
+		break;
+	}
+	hw->intr_mode = CSIO_IM_NONE;
+	hw->flags &= ~CSIO_HWF_HOST_INTR_ENABLED;
+}
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
new file mode 100644
index 0000000..ffe9be0
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -0,0 +1,2135 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/utsname.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_fc.h>
+#include <asm/unaligned.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_gs.h>
+#include <scsi/fc/fc_ms.h>
+
+#include "csio_hw.h"
+#include "csio_mb.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+
+int csio_fcoe_rnodes = 1024;
+int csio_fdmi_enable = 1;
+
+#define PORT_ID_PTR(_x)         ((uint8_t *)(&_x) + 1)
+
+/* Lnode SM declarations */
+static void csio_lns_uninit(struct csio_lnode *, enum csio_ln_ev);
+static void csio_lns_online(struct csio_lnode *, enum csio_ln_ev);
+static void csio_lns_ready(struct csio_lnode *, enum csio_ln_ev);
+static void csio_lns_offline(struct csio_lnode *, enum csio_ln_ev);
+
+static int csio_ln_mgmt_submit_req(struct csio_ioreq *,
+		void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *),
+		enum fcoe_cmn_type, struct csio_dma_buf *, uint32_t);
+
+/* LN event mapping */
+static enum csio_ln_ev fwevt_to_lnevt[] = {
+	CSIO_LNE_NONE,		/* None */
+	CSIO_LNE_NONE,		/* PLOGI_ACC_RCVD  */
+	CSIO_LNE_NONE,		/* PLOGI_RJT_RCVD  */
+	CSIO_LNE_NONE,		/* PLOGI_RCVD	   */
+	CSIO_LNE_NONE,		/* PLOGO_RCVD	   */
+	CSIO_LNE_NONE,		/* PRLI_ACC_RCVD   */
+	CSIO_LNE_NONE,		/* PRLI_RJT_RCVD   */
+	CSIO_LNE_NONE,		/* PRLI_RCVD	   */
+	CSIO_LNE_NONE,		/* PRLO_RCVD	   */
+	CSIO_LNE_NONE,		/* NPORT_ID_CHGD   */
+	CSIO_LNE_LOGO,		/* FLOGO_RCVD	   */
+	CSIO_LNE_LOGO,		/* CLR_VIRT_LNK_RCVD */
+	CSIO_LNE_FAB_INIT_DONE,/* FLOGI_ACC_RCVD   */
+	CSIO_LNE_NONE,		/* FLOGI_RJT_RCVD   */
+	CSIO_LNE_FAB_INIT_DONE,/* FDISC_ACC_RCVD   */
+	CSIO_LNE_NONE,		/* FDISC_RJT_RCVD   */
+	CSIO_LNE_NONE,		/* FLOGI_TMO_MAX_RETRY */
+	CSIO_LNE_NONE,		/* IMPL_LOGO_ADISC_ACC */
+	CSIO_LNE_NONE,		/* IMPL_LOGO_ADISC_RJT */
+	CSIO_LNE_NONE,		/* IMPL_LOGO_ADISC_CNFLT */
+	CSIO_LNE_NONE,		/* PRLI_TMO		*/
+	CSIO_LNE_NONE,		/* ADISC_TMO		*/
+	CSIO_LNE_NONE,		/* RSCN_DEV_LOST */
+	CSIO_LNE_NONE,		/* SCR_ACC_RCVD */
+	CSIO_LNE_NONE,		/* ADISC_RJT_RCVD */
+	CSIO_LNE_NONE,		/* LOGO_SNT */
+	CSIO_LNE_NONE,		/* PROTO_ERR_IMPL_LOGO */
+};
+
+#define CSIO_FWE_TO_LNE(_evt)	((_evt > PROTO_ERR_IMPL_LOGO) ?		\
+						CSIO_LNE_NONE :	\
+						fwevt_to_lnevt[_evt])
+
+#define csio_ct_rsp(cp)		(((struct fc_ct_hdr *)cp)->ct_cmd)
+#define csio_ct_reason(cp)	(((struct fc_ct_hdr *)cp)->ct_reason)
+#define csio_ct_expl(cp)	(((struct fc_ct_hdr *)cp)->ct_explan)
+#define csio_ct_get_pld(cp)	((void *)(((uint8_t *)cp) + FC_CT_HDR_LEN))
+
+/*
+ * csio_ln_match_by_portid - lookup lnode using given portid.
+ * @hw: HW module
+ * @portid: port-id.
+ *
+ * If found, returns lnode matching given portid otherwise returns NULL.
+ */
+static struct csio_lnode *
+csio_ln_lookup_by_portid(struct csio_hw *hw, uint8_t portid)
+{
+	struct csio_lnode *ln = hw->rln;
+	struct list_head *tmp;
+
+	/* Match siblings lnode with portid */
+	list_for_each(tmp, &hw->sln_head) {
+		ln = (struct csio_lnode *) tmp;
+		if (ln->portid == portid)
+			return ln;
+	}
+
+	return NULL;
+}
+
+/*
+ * csio_ln_lookup_by_vnpi - Lookup lnode using given vnp id.
+ * @hw - HW module
+ * @vnpi - vnp index.
+ * Returns - If found, returns lnode matching given vnp id
+ * otherwise returns NULL.
+ */
+static struct csio_lnode *
+csio_ln_lookup_by_vnpi(struct csio_hw *hw, uint32_t vnp_id)
+{
+	struct list_head *tmp1, *tmp2;
+	struct csio_lnode *sln = NULL, *cln = NULL;
+
+	if (list_empty(&hw->sln_head)) {
+		CSIO_INC_STATS(hw, n_lnlkup_miss);
+		return NULL;
+	}
+	/* Traverse sibling lnodes */
+	list_for_each(tmp1, &hw->sln_head) {
+		sln = (struct csio_lnode *) tmp1;
+
+		/* Match sibling lnode */
+		if (sln->vnp_flowid == vnp_id)
+			return sln;
+
+		if (list_empty(&sln->cln_head))
+			continue;
+
+		/* Traverse children lnodes */
+		list_for_each(tmp2, &sln->cln_head) {
+			cln = (struct csio_lnode *) tmp2;
+
+			if (cln->vnp_flowid == vnp_id)
+				return cln;
+		}
+	}
+	CSIO_INC_STATS(hw, n_lnlkup_miss);
+	return NULL;
+}
+
+/**
+ * csio_lnode_lookup_by_wwpn - Lookup lnode using given wwpn.
+ * @hw:		HW module.
+ * @wwpn:	WWPN.
+ *
+ * If found, returns lnode matching given wwpn, returns NULL otherwise.
+ */
+struct csio_lnode *
+csio_lnode_lookup_by_wwpn(struct csio_hw *hw, uint8_t *wwpn)
+{
+	struct list_head *tmp1, *tmp2;
+	struct csio_lnode *sln = NULL, *cln = NULL;
+
+	if (list_empty(&hw->sln_head)) {
+		CSIO_INC_STATS(hw, n_lnlkup_miss);
+		return NULL;
+	}
+	/* Traverse sibling lnodes */
+	list_for_each(tmp1, &hw->sln_head) {
+		sln = (struct csio_lnode *) tmp1;
+
+		/* Match sibling lnode */
+		if (!memcmp(csio_ln_wwpn(sln), wwpn, 8))
+			return sln;
+
+		if (list_empty(&sln->cln_head))
+			continue;
+
+		/* Traverse children lnodes */
+		list_for_each(tmp2, &sln->cln_head) {
+			cln = (struct csio_lnode *) tmp2;
+
+			if (!memcmp(csio_ln_wwpn(cln), wwpn, 8))
+				return cln;
+		}
+	}
+	return NULL;
+}
+
+/* FDMI */
+static void
+csio_fill_ct_iu(void *buf, uint8_t type, uint8_t sub_type, uint16_t op)
+{
+	struct fc_ct_hdr *cmd = (struct fc_ct_hdr *)buf;
+	cmd->ct_rev = FC_CT_REV;
+	cmd->ct_fs_type = type;
+	cmd->ct_fs_subtype = sub_type;
+	cmd->ct_cmd = htons(op);
+}
+
+static int
+csio_hostname(uint8_t *buf, size_t buf_len)
+{
+	if (snprintf(buf, buf_len, "%s", init_utsname()->nodename) > 0)
+		return 0;
+	return -1;
+}
+
+static int
+csio_osname(uint8_t *buf, size_t buf_len)
+{
+	if (snprintf(buf, buf_len, "%s %s %s",
+		     init_utsname()->sysname,
+		     init_utsname()->release,
+		     init_utsname()->version) > 0)
+		return 0;
+
+	return -1;
+}
+
+static inline void
+csio_append_attrib(uint8_t **ptr, uint16_t type, uint8_t *val, uint16_t len)
+{
+	struct fc_fdmi_attr_entry *ae = (struct fc_fdmi_attr_entry *)*ptr;
+	ae->type = htons(type);
+	len += 4;		/* includes attribute type and length */
+	len = (len + 3) & ~3;	/* should be multiple of 4 bytes */
+	ae->len = htons(len);
+	memcpy(ae->value, val, len);
+	*ptr += len;
+}
+
+/*
+ * csio_ln_fdmi_done - FDMI registeration completion
+ * @hw: HW context
+ * @fdmi_req: fdmi request
+ */
+static void
+csio_ln_fdmi_done(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
+{
+	void *cmd;
+	struct csio_lnode *ln = fdmi_req->lnode;
+
+	if (fdmi_req->wr_status != FW_SUCCESS) {
+		csio_ln_dbg(ln, "WR error:%x in processing fdmi rpa cmd\n",
+			    fdmi_req->wr_status);
+		CSIO_INC_STATS(ln, n_fdmi_err);
+	}
+
+	cmd = fdmi_req->dma_buf.vaddr;
+	if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) {
+		csio_ln_dbg(ln, "fdmi rpa cmd rejected reason %x expl %x\n",
+			    csio_ct_reason(cmd), csio_ct_expl(cmd));
+	}
+}
+
+/*
+ * csio_ln_fdmi_rhba_cbfn - RHBA completion
+ * @hw: HW context
+ * @fdmi_req: fdmi request
+ */
+static void
+csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
+{
+	void *cmd;
+	uint8_t *pld;
+	uint32_t len = 0;
+	__be32 val;
+	__be16 mfs;
+	uint32_t numattrs = 0;
+	struct csio_lnode *ln = fdmi_req->lnode;
+	struct fs_fdmi_attrs *attrib_blk;
+	struct fc_fdmi_port_name *port_name;
+	uint8_t buf[64];
+	uint8_t *fc4_type;
+
+	if (fdmi_req->wr_status != FW_SUCCESS) {
+		csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n",
+			    fdmi_req->wr_status);
+		CSIO_INC_STATS(ln, n_fdmi_err);
+	}
+
+	cmd = fdmi_req->dma_buf.vaddr;
+	if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) {
+		csio_ln_dbg(ln, "fdmi rhba cmd rejected reason %x expl %x\n",
+			    csio_ct_reason(cmd), csio_ct_expl(cmd));
+	}
+
+	if (!csio_is_rnode_ready(fdmi_req->rnode)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		return;
+	}
+
+	/* Prepare CT hdr for RPA cmd */
+	memset(cmd, 0, FC_CT_HDR_LEN);
+	csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_RPA);
+
+	/* Prepare RPA payload */
+	pld = (uint8_t *)csio_ct_get_pld(cmd);
+	port_name = (struct fc_fdmi_port_name *)pld;
+	memcpy(&port_name->portname, csio_ln_wwpn(ln), 8);
+	pld += sizeof(*port_name);
+
+	/* Start appending Port attributes */
+	attrib_blk = (struct fs_fdmi_attrs *)pld;
+	attrib_blk->numattrs = 0;
+	len += sizeof(attrib_blk->numattrs);
+	pld += sizeof(attrib_blk->numattrs);
+
+	fc4_type = &buf[0];
+	memset(fc4_type, 0, FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+	fc4_type[2] = 1;
+	fc4_type[7] = 1;
+	csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_FC4TYPES,
+			   fc4_type, FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+	numattrs++;
+	val = htonl(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
+	csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_SUPPORTEDSPEED,
+			   (uint8_t *)&val,
+			   FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN);
+	numattrs++;
+
+	if (hw->pport[ln->portid].link_speed == FW_PORT_CAP_SPEED_1G)
+		val = htonl(FC_PORTSPEED_1GBIT);
+	else if (hw->pport[ln->portid].link_speed == FW_PORT_CAP_SPEED_10G)
+		val = htonl(FC_PORTSPEED_10GBIT);
+	else
+		val = htonl(CSIO_HBA_PORTSPEED_UNKNOWN);
+	csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_CURRENTPORTSPEED,
+			   (uint8_t *)&val,
+			   FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN);
+	numattrs++;
+
+	mfs = ln->ln_sparm.csp.sp_bb_data;
+	csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_MAXFRAMESIZE,
+			   (uint8_t *)&mfs, FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN);
+	numattrs++;
+
+	strcpy(buf, "csiostor");
+	csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_OSDEVICENAME, buf,
+			   (uint16_t)strlen(buf));
+	numattrs++;
+
+	if (!csio_hostname(buf, sizeof(buf))) {
+		csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_HOSTNAME,
+				   buf, (uint16_t)strlen(buf));
+		numattrs++;
+	}
+	attrib_blk->numattrs = htonl(numattrs);
+	len = (uint32_t)(pld - (uint8_t *)cmd);
+
+	/* Submit FDMI RPA request */
+	spin_lock_irq(&hw->lock);
+	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done,
+				FCOE_CT, &fdmi_req->dma_buf, len)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n");
+	}
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_ln_fdmi_dprt_cbfn - DPRT completion
+ * @hw: HW context
+ * @fdmi_req: fdmi request
+ */
+static void
+csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
+{
+	void *cmd;
+	uint8_t *pld;
+	uint32_t len = 0;
+	uint32_t numattrs = 0;
+	__be32  maxpayload = htonl(65536);
+	struct fc_fdmi_hba_identifier *hbaid;
+	struct csio_lnode *ln = fdmi_req->lnode;
+	struct fc_fdmi_rpl *reg_pl;
+	struct fs_fdmi_attrs *attrib_blk;
+	uint8_t buf[64];
+
+	if (fdmi_req->wr_status != FW_SUCCESS) {
+		csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n",
+			    fdmi_req->wr_status);
+		CSIO_INC_STATS(ln, n_fdmi_err);
+	}
+
+	if (!csio_is_rnode_ready(fdmi_req->rnode)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		return;
+	}
+	cmd = fdmi_req->dma_buf.vaddr;
+	if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) {
+		csio_ln_dbg(ln, "fdmi dprt cmd rejected reason %x expl %x\n",
+			    csio_ct_reason(cmd), csio_ct_expl(cmd));
+	}
+
+	/* Prepare CT hdr for RHBA cmd */
+	memset(cmd, 0, FC_CT_HDR_LEN);
+	csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_RHBA);
+	len = FC_CT_HDR_LEN;
+
+	/* Prepare RHBA payload */
+	pld = (uint8_t *)csio_ct_get_pld(cmd);
+	hbaid = (struct fc_fdmi_hba_identifier *)pld;
+	memcpy(&hbaid->id, csio_ln_wwpn(ln), 8); /* HBA identifer */
+	pld += sizeof(*hbaid);
+
+	/* Register one port per hba */
+	reg_pl = (struct fc_fdmi_rpl *)pld;
+	reg_pl->numport = htonl(1);
+	memcpy(&reg_pl->port[0].portname, csio_ln_wwpn(ln), 8);
+	pld += sizeof(*reg_pl);
+
+	/* Start appending HBA attributes hba */
+	attrib_blk = (struct fs_fdmi_attrs *)pld;
+	attrib_blk->numattrs = 0;
+	len += sizeof(attrib_blk->numattrs);
+	pld += sizeof(attrib_blk->numattrs);
+
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_NODENAME, csio_ln_wwnn(ln),
+			   FC_FDMI_HBA_ATTR_NODENAME_LEN);
+	numattrs++;
+
+	memset(buf, 0, sizeof(buf));
+
+	strcpy(buf, "Chelsio Communications");
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MANUFACTURER, buf,
+			   (uint16_t)strlen(buf));
+	numattrs++;
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_SERIALNUMBER,
+			   hw->vpd.sn, (uint16_t)sizeof(hw->vpd.sn));
+	numattrs++;
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODEL, hw->vpd.id,
+			   (uint16_t)sizeof(hw->vpd.id));
+	numattrs++;
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODELDESCRIPTION,
+			   hw->model_desc, (uint16_t)strlen(hw->model_desc));
+	numattrs++;
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_HARDWAREVERSION,
+			   hw->hw_ver, (uint16_t)sizeof(hw->hw_ver));
+	numattrs++;
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_FIRMWAREVERSION,
+			   hw->fwrev_str, (uint16_t)strlen(hw->fwrev_str));
+	numattrs++;
+
+	if (!csio_osname(buf, sizeof(buf))) {
+		csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_OSNAMEVERSION,
+				   buf, (uint16_t)strlen(buf));
+		numattrs++;
+	}
+
+	csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MAXCTPAYLOAD,
+			   (uint8_t *)&maxpayload,
+			   FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN);
+	len = (uint32_t)(pld - (uint8_t *)cmd);
+	numattrs++;
+	attrib_blk->numattrs = htonl(numattrs);
+
+	/* Submit FDMI RHBA request */
+	spin_lock_irq(&hw->lock);
+	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn,
+				FCOE_CT, &fdmi_req->dma_buf, len)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n");
+	}
+	spin_unlock_irq(&hw->lock);
+}
+
+/*
+ * csio_ln_fdmi_dhba_cbfn - DHBA completion
+ * @hw: HW context
+ * @fdmi_req: fdmi request
+ */
+static void
+csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
+{
+	struct csio_lnode *ln = fdmi_req->lnode;
+	void *cmd;
+	struct fc_fdmi_port_name *port_name;
+	uint32_t len;
+
+	if (fdmi_req->wr_status != FW_SUCCESS) {
+		csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n",
+			    fdmi_req->wr_status);
+		CSIO_INC_STATS(ln, n_fdmi_err);
+	}
+
+	if (!csio_is_rnode_ready(fdmi_req->rnode)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		return;
+	}
+	cmd = fdmi_req->dma_buf.vaddr;
+	if (ntohs(csio_ct_rsp(cmd)) != FC_FS_ACC) {
+		csio_ln_dbg(ln, "fdmi dhba cmd rejected reason %x expl %x\n",
+			    csio_ct_reason(cmd), csio_ct_expl(cmd));
+	}
+
+	/* Send FDMI cmd to de-register any Port attributes if registered
+	 * before
+	 */
+
+	/* Prepare FDMI DPRT cmd */
+	memset(cmd, 0, FC_CT_HDR_LEN);
+	csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_DPRT);
+	len = FC_CT_HDR_LEN;
+	port_name = (struct fc_fdmi_port_name *)csio_ct_get_pld(cmd);
+	memcpy(&port_name->portname, csio_ln_wwpn(ln), 8);
+	len += sizeof(*port_name);
+
+	/* Submit FDMI request */
+	spin_lock_irq(&hw->lock);
+	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn,
+				FCOE_CT, &fdmi_req->dma_buf, len)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n");
+	}
+	spin_unlock_irq(&hw->lock);
+}
+
+/**
+ * csio_ln_fdmi_start - Start an FDMI request.
+ * @ln:		lnode
+ * @context:	session context
+ *
+ * Issued with lock held.
+ */
+int
+csio_ln_fdmi_start(struct csio_lnode *ln, void *context)
+{
+	struct csio_ioreq *fdmi_req;
+	struct csio_rnode *fdmi_rn = (struct csio_rnode *)context;
+	void *cmd;
+	struct fc_fdmi_hba_identifier *hbaid;
+	uint32_t len;
+
+	if (!(ln->flags & CSIO_LNF_FDMI_ENABLE))
+		return -EPROTONOSUPPORT;
+
+	if (!csio_is_rnode_ready(fdmi_rn))
+		CSIO_INC_STATS(ln, n_fdmi_err);
+
+	/* Send FDMI cmd to de-register any HBA attributes if registered
+	 * before
+	 */
+
+	fdmi_req = ln->mgmt_req;
+	fdmi_req->lnode = ln;
+	fdmi_req->rnode = fdmi_rn;
+
+	/* Prepare FDMI DHBA cmd */
+	cmd = fdmi_req->dma_buf.vaddr;
+	memset(cmd, 0, FC_CT_HDR_LEN);
+	csio_fill_ct_iu(cmd, FC_FST_MGMT, FC_FDMI_SUBTYPE, FC_FDMI_DHBA);
+	len = FC_CT_HDR_LEN;
+
+	hbaid = (struct fc_fdmi_hba_identifier *)csio_ct_get_pld(cmd);
+	memcpy(&hbaid->id, csio_ln_wwpn(ln), 8);
+	len += sizeof(*hbaid);
+
+	/* Submit FDMI request */
+	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dhba_cbfn,
+					FCOE_CT, &fdmi_req->dma_buf, len)) {
+		CSIO_INC_STATS(ln, n_fdmi_err);
+		csio_ln_dbg(ln, "Failed to issue fdmi dhba req\n");
+	}
+
+	return 0;
+}
+
+/*
+ * csio_ln_vnp_read_cbfn - vnp read completion handler.
+ * @hw: HW lnode
+ * @cbfn: Completion handler.
+ *
+ * Reads vnp response and updates ln parameters.
+ */
+static void
+csio_ln_vnp_read_cbfn(struct csio_hw *hw, struct csio_mb *mbp)
+{
+	struct csio_lnode *ln = ((struct csio_lnode *)mbp->priv);
+	struct fw_fcoe_vnp_cmd *rsp = (struct fw_fcoe_vnp_cmd *)(mbp->mb);
+	struct fc_els_csp *csp;
+	struct fc_els_cssp *clsp;
+	enum fw_retval retval;
+	__be32 nport_id;
+
+	retval = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16));
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "FCOE VNP read cmd returned error:0x%x\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+
+	memcpy(ln->mac, rsp->vnport_mac, sizeof(ln->mac));
+	memcpy(&nport_id, &rsp->vnport_mac[3], sizeof(uint8_t)*3);
+	ln->nport_id = ntohl(nport_id);
+	ln->nport_id = ln->nport_id >> 8;
+
+	/* Update WWNs */
+	/*
+	 * This may look like a duplication of what csio_fcoe_enable_link()
+	 * does, but is absolutely necessary if the vnpi changes between
+	 * a FCOE LINK UP and FCOE LINK DOWN.
+	 */
+	memcpy(csio_ln_wwnn(ln), rsp->vnport_wwnn, 8);
+	memcpy(csio_ln_wwpn(ln), rsp->vnport_wwpn, 8);
+
+	/* Copy common sparam */
+	csp = (struct fc_els_csp *)rsp->cmn_srv_parms;
+	ln->ln_sparm.csp.sp_hi_ver = csp->sp_hi_ver;
+	ln->ln_sparm.csp.sp_lo_ver = csp->sp_lo_ver;
+	ln->ln_sparm.csp.sp_bb_cred = csp->sp_bb_cred;
+	ln->ln_sparm.csp.sp_features = csp->sp_features;
+	ln->ln_sparm.csp.sp_bb_data = csp->sp_bb_data;
+	ln->ln_sparm.csp.sp_r_a_tov = csp->sp_r_a_tov;
+	ln->ln_sparm.csp.sp_e_d_tov = csp->sp_e_d_tov;
+
+	/* Copy word 0 & word 1 of class sparam */
+	clsp = (struct fc_els_cssp *)rsp->clsp_word_0_1;
+	ln->ln_sparm.clsp[2].cp_class = clsp->cp_class;
+	ln->ln_sparm.clsp[2].cp_init = clsp->cp_init;
+	ln->ln_sparm.clsp[2].cp_recip = clsp->cp_recip;
+	ln->ln_sparm.clsp[2].cp_rdfs = clsp->cp_rdfs;
+
+	spin_unlock_irq(&hw->lock);
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	/* Send an event to update local attribs */
+	csio_lnode_async_event(ln, CSIO_LN_FC_ATTRIB_UPDATE);
+}
+
+/*
+ * csio_ln_vnp_read - Read vnp params.
+ * @ln: lnode
+ * @cbfn: Completion handler.
+ *
+ * Issued with lock held.
+ */
+static int
+csio_ln_vnp_read(struct csio_lnode *ln,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct csio_hw *hw = ln->hwp;
+	struct csio_mb  *mbp;
+
+	/* Allocate Mbox request */
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Prepare VNP Command */
+	csio_fcoe_vnp_read_init_mb(ln, mbp,
+				    CSIO_MB_DEFAULT_TMO,
+				    ln->fcf_flowid,
+				    ln->vnp_flowid,
+				    cbfn);
+
+	/* Issue MBOX cmd */
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Failed to issue mbox FCoE VNP command\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * csio_fcoe_enable_link - Enable fcoe link.
+ * @ln: lnode
+ * @enable: enable/disable
+ * Issued with lock held.
+ * Issues mbox cmd to bring up FCOE link on port associated with given ln.
+ */
+static int
+csio_fcoe_enable_link(struct csio_lnode *ln, bool enable)
+{
+	struct csio_hw *hw = ln->hwp;
+	struct csio_mb  *mbp;
+	enum fw_retval retval;
+	uint8_t portid;
+	uint8_t sub_op;
+	struct fw_fcoe_link_cmd *lcmd;
+	int i;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	portid = ln->portid;
+	sub_op = enable ? FCOE_LINK_UP : FCOE_LINK_DOWN;
+
+	csio_dbg(hw, "bringing FCOE LINK %s on Port:%d\n",
+		 sub_op ? "UP" : "DOWN", portid);
+
+	csio_write_fcoe_link_cond_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO,
+					  portid, sub_op, 0, 0, 0, NULL);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "failed to issue FCOE LINK cmd on port[%d]\n",
+			portid);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	retval = csio_mb_fw_retval(mbp);
+	if (retval != FW_SUCCESS) {
+		csio_err(hw,
+			 "FCOE LINK %s cmd on port[%d] failed with "
+			 "ret:x%x\n", sub_op ? "UP" : "DOWN", portid, retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	if (!enable)
+		goto out;
+
+	lcmd = (struct fw_fcoe_link_cmd *)mbp->mb;
+
+	memcpy(csio_ln_wwnn(ln), lcmd->vnport_wwnn, 8);
+	memcpy(csio_ln_wwpn(ln), lcmd->vnport_wwpn, 8);
+
+	for (i = 0; i < CSIO_MAX_PPORTS; i++)
+		if (hw->pport[i].portid == portid)
+			memcpy(hw->pport[i].mac, lcmd->phy_mac, 6);
+
+out:
+	mempool_free(mbp, hw->mb_mempool);
+	return 0;
+}
+
+/*
+ * csio_ln_read_fcf_cbfn - Read fcf parameters
+ * @ln: lnode
+ *
+ * read fcf response and Update ln fcf information.
+ */
+static void
+csio_ln_read_fcf_cbfn(struct csio_hw *hw, struct csio_mb *mbp)
+{
+	struct csio_lnode *ln = (struct csio_lnode *)mbp->priv;
+	struct csio_fcf_info	*fcf_info;
+	struct fw_fcoe_fcf_cmd *rsp =
+				(struct fw_fcoe_fcf_cmd *)(mbp->mb);
+	enum fw_retval retval;
+
+	retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16));
+	if (retval != FW_SUCCESS) {
+		csio_ln_err(ln, "FCOE FCF cmd failed with ret x%x\n",
+				retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return;
+	}
+
+	spin_lock_irq(&hw->lock);
+	fcf_info = ln->fcfinfo;
+	fcf_info->priority = FW_FCOE_FCF_CMD_PRIORITY_GET(
+					ntohs(rsp->priority_pkd));
+	fcf_info->vf_id = ntohs(rsp->vf_id);
+	fcf_info->vlan_id = rsp->vlan_id;
+	fcf_info->max_fcoe_size = ntohs(rsp->max_fcoe_size);
+	fcf_info->fka_adv = be32_to_cpu(rsp->fka_adv);
+	fcf_info->fcfi = FW_FCOE_FCF_CMD_FCFI_GET(ntohl(rsp->op_to_fcfi));
+	fcf_info->fpma = FW_FCOE_FCF_CMD_FPMA_GET(rsp->fpma_to_portid);
+	fcf_info->spma = FW_FCOE_FCF_CMD_SPMA_GET(rsp->fpma_to_portid);
+	fcf_info->login = FW_FCOE_FCF_CMD_LOGIN_GET(rsp->fpma_to_portid);
+	fcf_info->portid = FW_FCOE_FCF_CMD_PORTID_GET(rsp->fpma_to_portid);
+	memcpy(fcf_info->fc_map, rsp->fc_map, sizeof(fcf_info->fc_map));
+	memcpy(fcf_info->mac, rsp->mac, sizeof(fcf_info->mac));
+	memcpy(fcf_info->name_id, rsp->name_id, sizeof(fcf_info->name_id));
+	memcpy(fcf_info->fabric, rsp->fabric, sizeof(fcf_info->fabric));
+	memcpy(fcf_info->spma_mac, rsp->spma_mac, sizeof(fcf_info->spma_mac));
+
+	spin_unlock_irq(&hw->lock);
+
+	mempool_free(mbp, hw->mb_mempool);
+}
+
+/*
+ * csio_ln_read_fcf_entry - Read fcf entry.
+ * @ln: lnode
+ * @cbfn: Completion handler.
+ *
+ * Issued with lock held.
+ */
+static int
+csio_ln_read_fcf_entry(struct csio_lnode *ln,
+			void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct csio_hw *hw = ln->hwp;
+	struct csio_mb  *mbp;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Get FCoE FCF information */
+	csio_fcoe_read_fcf_init_mb(ln, mbp, CSIO_MB_DEFAULT_TMO,
+				      ln->portid, ln->fcf_flowid, cbfn);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "failed to issue FCOE FCF cmd\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * csio_handle_link_up - Logical Linkup event.
+ * @hw - HW module.
+ * @portid - Physical port number
+ * @fcfi - FCF index.
+ * @vnpi - VNP index.
+ * Returns - none.
+ *
+ * This event is received from FW, when virtual link is established between
+ * Physical port[ENode] and FCF. If its new vnpi, then local node object is
+ * created on this FCF and set to [ONLINE] state.
+ * Lnode waits for FW_RDEV_CMD event to be received indicating that
+ * Fabric login is completed and lnode moves to [READY] state.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_handle_link_up(struct csio_hw *hw, uint8_t portid, uint32_t fcfi,
+		    uint32_t vnpi)
+{
+	struct csio_lnode *ln = NULL;
+
+	/* Lookup lnode based on vnpi */
+	ln = csio_ln_lookup_by_vnpi(hw, vnpi);
+	if (!ln) {
+		/* Pick lnode based on portid */
+		ln = csio_ln_lookup_by_portid(hw, portid);
+		if (!ln) {
+			csio_err(hw, "failed to lookup fcoe lnode on port:%d\n",
+				portid);
+			CSIO_DB_ASSERT(0);
+			return;
+		}
+
+		/* Check if lnode has valid vnp flowid */
+		if (ln->vnp_flowid != CSIO_INVALID_IDX) {
+			/* New VN-Port */
+			spin_unlock_irq(&hw->lock);
+			csio_lnode_alloc(hw);
+			spin_lock_irq(&hw->lock);
+			if (!ln) {
+				csio_err(hw,
+					 "failed to allocate fcoe lnode"
+					 "for port:%d vnpi:x%x\n",
+					 portid, vnpi);
+				CSIO_DB_ASSERT(0);
+				return;
+			}
+			ln->portid = portid;
+		}
+		ln->vnp_flowid = vnpi;
+		ln->dev_num &= ~0xFFFF;
+		ln->dev_num |= vnpi;
+	}
+
+	/*Initialize fcfi */
+	ln->fcf_flowid = fcfi;
+
+	csio_info(hw, "Port:%d - FCOE LINK UP\n", portid);
+
+	CSIO_INC_STATS(ln, n_link_up);
+
+	/* Send LINKUP event to SM */
+	csio_post_event(&ln->sm, CSIO_LNE_LINKUP);
+}
+
+/*
+ * csio_post_event_rns
+ * @ln - FCOE lnode
+ * @evt - Given rnode event
+ * Returns - none
+ *
+ * Posts given rnode event to all FCOE rnodes connected with given Lnode.
+ * This routine is invoked when lnode receives LINK_DOWN/DOWN_LINK/CLOSE
+ * event.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_post_event_rns(struct csio_lnode *ln, enum csio_rn_ev evt)
+{
+	struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead;
+	struct list_head *tmp, *next;
+	struct csio_rnode *rn;
+
+	list_for_each_safe(tmp, next, &rnhead->sm.sm_list) {
+		rn = (struct csio_rnode *) tmp;
+		csio_post_event(&rn->sm, evt);
+	}
+}
+
+/*
+ * csio_cleanup_rns
+ * @ln - FCOE lnode
+ * Returns - none
+ *
+ * Frees all FCOE rnodes connected with given Lnode.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_cleanup_rns(struct csio_lnode *ln)
+{
+	struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead;
+	struct list_head *tmp, *next_rn;
+	struct csio_rnode *rn;
+
+	list_for_each_safe(tmp, next_rn, &rnhead->sm.sm_list) {
+		rn = (struct csio_rnode *) tmp;
+		csio_put_rnode(ln, rn);
+	}
+
+}
+
+/*
+ * csio_post_event_lns
+ * @ln - FCOE lnode
+ * @evt - Given lnode event
+ * Returns - none
+ *
+ * Posts given lnode event to all FCOE lnodes connected with given Lnode.
+ * This routine is invoked when lnode receives LINK_DOWN/DOWN_LINK/CLOSE
+ * event.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_post_event_lns(struct csio_lnode *ln, enum csio_ln_ev evt)
+{
+	struct list_head *tmp;
+	struct csio_lnode *cln, *sln;
+
+	/* If NPIV lnode, send evt only to that and return */
+	if (csio_is_npiv_ln(ln)) {
+		csio_post_event(&ln->sm, evt);
+		return;
+	}
+
+	sln = ln;
+	/* Traverse children lnodes list and send evt */
+	list_for_each(tmp, &sln->cln_head) {
+		cln = (struct csio_lnode *) tmp;
+		csio_post_event(&cln->sm, evt);
+	}
+
+	/* Send evt to parent lnode */
+	csio_post_event(&ln->sm, evt);
+}
+
+/*
+ * csio_ln_down - Lcoal nport is down
+ * @ln - FCOE Lnode
+ * Returns - none
+ *
+ * Sends LINK_DOWN events to Lnode and its associated NPIVs lnodes.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_ln_down(struct csio_lnode *ln)
+{
+	csio_post_event_lns(ln, CSIO_LNE_LINK_DOWN);
+}
+
+/*
+ * csio_handle_link_down - Logical Linkdown event.
+ * @hw - HW module.
+ * @portid - Physical port number
+ * @fcfi - FCF index.
+ * @vnpi - VNP index.
+ * Returns - none
+ *
+ * This event is received from FW, when virtual link goes down between
+ * Physical port[ENode] and FCF. Lnode and its associated NPIVs lnode hosted on
+ * this vnpi[VN-Port] will be de-instantiated.
+ *
+ * This called with hw lock held
+ */
+static void
+csio_handle_link_down(struct csio_hw *hw, uint8_t portid, uint32_t fcfi,
+		      uint32_t vnpi)
+{
+	struct csio_fcf_info *fp;
+	struct csio_lnode *ln;
+
+	/* Lookup lnode based on vnpi */
+	ln = csio_ln_lookup_by_vnpi(hw, vnpi);
+	if (ln) {
+		fp = ln->fcfinfo;
+		CSIO_INC_STATS(ln, n_link_down);
+
+		/*Warn if linkdown received if lnode is not in ready state */
+		if (!csio_is_lnode_ready(ln)) {
+			csio_ln_warn(ln,
+				"warn: FCOE link is already in offline "
+				"Ignoring Fcoe linkdown event on portid %d\n",
+				 portid);
+			CSIO_INC_STATS(ln, n_evt_drop);
+			return;
+		}
+
+		/* Verify portid */
+		if (fp->portid != portid) {
+			csio_ln_warn(ln,
+				"warn: FCOE linkdown recv with "
+				"invalid port %d\n", portid);
+			CSIO_INC_STATS(ln, n_evt_drop);
+			return;
+		}
+
+		/* verify fcfi */
+		if (ln->fcf_flowid != fcfi) {
+			csio_ln_warn(ln,
+				"warn: FCOE linkdown recv with "
+				"invalid fcfi x%x\n", fcfi);
+			CSIO_INC_STATS(ln, n_evt_drop);
+			return;
+		}
+
+		csio_info(hw, "Port:%d - FCOE LINK DOWN\n", portid);
+
+		/* Send LINK_DOWN event to lnode s/m */
+		csio_ln_down(ln);
+
+		return;
+	} else {
+		csio_warn(hw,
+			  "warn: FCOE linkdown recv with invalid vnpi x%x\n",
+			  vnpi);
+		CSIO_INC_STATS(hw, n_evt_drop);
+	}
+}
+
+/*
+ * csio_is_lnode_ready - Checks FCOE lnode is in ready state.
+ * @ln: Lnode module
+ *
+ * Returns True if FCOE lnode is in ready state.
+ */
+int
+csio_is_lnode_ready(struct csio_lnode *ln)
+{
+	return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
+}
+
+/*****************************************************************************/
+/* START: Lnode SM                                                           */
+/*****************************************************************************/
+/*
+ * csio_lns_uninit - The request in uninit state.
+ * @ln - FCOE lnode.
+ * @evt - Event to be processed.
+ *
+ * Process the given lnode event which is currently in "uninit" state.
+ * Invoked with HW lock held.
+ * Return - none.
+ */
+static void
+csio_lns_uninit(struct csio_lnode *ln, enum csio_ln_ev evt)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_lnode *rln = hw->rln;
+	int rv;
+
+	CSIO_INC_STATS(ln, n_evt_sm[evt]);
+	switch (evt) {
+	case CSIO_LNE_LINKUP:
+		csio_set_state(&ln->sm, csio_lns_online);
+		/* Read FCF only for physical lnode */
+		if (csio_is_phys_ln(ln)) {
+			rv = csio_ln_read_fcf_entry(ln,
+					csio_ln_read_fcf_cbfn);
+			if (rv != 0) {
+				/* TODO: Send HW RESET event */
+				CSIO_INC_STATS(ln, n_err);
+				break;
+			}
+
+			/* Add FCF record */
+			list_add_tail(&ln->fcfinfo->list, &rln->fcf_lsthead);
+		}
+
+		rv = csio_ln_vnp_read(ln, csio_ln_vnp_read_cbfn);
+		if (rv != 0) {
+			/* TODO: Send HW RESET event */
+			CSIO_INC_STATS(ln, n_err);
+		}
+		break;
+
+	case CSIO_LNE_DOWN_LINK:
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			    "unexp ln event %d recv from did:x%x in "
+			    "ln state[uninit].\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_unexp);
+		break;
+	} /* switch event */
+}
+
+/*
+ * csio_lns_online - The request in online state.
+ * @ln - FCOE lnode.
+ * @evt - Event to be processed.
+ *
+ * Process the given lnode event which is currently in "online" state.
+ * Invoked with HW lock held.
+ * Return - none.
+ */
+static void
+csio_lns_online(struct csio_lnode *ln, enum csio_ln_ev evt)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	CSIO_INC_STATS(ln, n_evt_sm[evt]);
+	switch (evt) {
+	case CSIO_LNE_LINKUP:
+		csio_ln_warn(ln,
+			     "warn: FCOE link is up already "
+			     "Ignoring linkup on port:%d\n", ln->portid);
+		CSIO_INC_STATS(ln, n_evt_drop);
+		break;
+
+	case CSIO_LNE_FAB_INIT_DONE:
+		csio_set_state(&ln->sm, csio_lns_ready);
+
+		spin_unlock_irq(&hw->lock);
+		csio_lnode_async_event(ln, CSIO_LN_FC_LINKUP);
+		spin_lock_irq(&hw->lock);
+
+		break;
+
+	case CSIO_LNE_LINK_DOWN:
+		/* Fall through */
+	case CSIO_LNE_DOWN_LINK:
+		csio_set_state(&ln->sm, csio_lns_uninit);
+		if (csio_is_phys_ln(ln)) {
+			/* Remove FCF entry */
+			list_del_init(&ln->fcfinfo->list);
+		}
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			    "unexp ln event %d recv from did:x%x in "
+			    "ln state[uninit].\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_unexp);
+
+		break;
+	} /* switch event */
+}
+
+/*
+ * csio_lns_ready - The request in ready state.
+ * @ln - FCOE lnode.
+ * @evt - Event to be processed.
+ *
+ * Process the given lnode event which is currently in "ready" state.
+ * Invoked with HW lock held.
+ * Return - none.
+ */
+static void
+csio_lns_ready(struct csio_lnode *ln, enum csio_ln_ev evt)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	CSIO_INC_STATS(ln, n_evt_sm[evt]);
+	switch (evt) {
+	case CSIO_LNE_FAB_INIT_DONE:
+		csio_ln_dbg(ln,
+			    "ignoring event %d recv from did x%x"
+			    "in ln state[ready].\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_drop);
+		break;
+
+	case CSIO_LNE_LINK_DOWN:
+		csio_set_state(&ln->sm, csio_lns_offline);
+		csio_post_event_rns(ln, CSIO_RNFE_DOWN);
+
+		spin_unlock_irq(&hw->lock);
+		csio_lnode_async_event(ln, CSIO_LN_FC_LINKDOWN);
+		spin_lock_irq(&hw->lock);
+
+		if (csio_is_phys_ln(ln)) {
+			/* Remove FCF entry */
+			list_del_init(&ln->fcfinfo->list);
+		}
+		break;
+
+	case CSIO_LNE_DOWN_LINK:
+		csio_set_state(&ln->sm, csio_lns_offline);
+		csio_post_event_rns(ln, CSIO_RNFE_DOWN);
+
+		/* Host need to issue aborts in case if FW has not returned
+		 * WRs with status "ABORTED"
+		 */
+		spin_unlock_irq(&hw->lock);
+		csio_lnode_async_event(ln, CSIO_LN_FC_LINKDOWN);
+		spin_lock_irq(&hw->lock);
+
+		if (csio_is_phys_ln(ln)) {
+			/* Remove FCF entry */
+			list_del_init(&ln->fcfinfo->list);
+		}
+		break;
+
+	case CSIO_LNE_CLOSE:
+		csio_set_state(&ln->sm, csio_lns_uninit);
+		csio_post_event_rns(ln, CSIO_RNFE_CLOSE);
+		break;
+
+	case CSIO_LNE_LOGO:
+		csio_set_state(&ln->sm, csio_lns_offline);
+		csio_post_event_rns(ln, CSIO_RNFE_DOWN);
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			    "unexp ln event %d recv from did:x%x in "
+			    "ln state[uninit].\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_unexp);
+		CSIO_DB_ASSERT(0);
+		break;
+	} /* switch event */
+}
+
+/*
+ * csio_lns_offline - The request in offline state.
+ * @ln - FCOE lnode.
+ * @evt - Event to be processed.
+ *
+ * Process the given lnode event which is currently in "offline" state.
+ * Invoked with HW lock held.
+ * Return - none.
+ */
+static void
+csio_lns_offline(struct csio_lnode *ln, enum csio_ln_ev evt)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_lnode *rln = hw->rln;
+	int rv;
+
+	CSIO_INC_STATS(ln, n_evt_sm[evt]);
+	switch (evt) {
+	case CSIO_LNE_LINKUP:
+		csio_set_state(&ln->sm, csio_lns_online);
+		/* Read FCF only for physical lnode */
+		if (csio_is_phys_ln(ln)) {
+			rv = csio_ln_read_fcf_entry(ln,
+					csio_ln_read_fcf_cbfn);
+			if (rv != 0) {
+				/* TODO: Send HW RESET event */
+				CSIO_INC_STATS(ln, n_err);
+				break;
+			}
+
+			/* Add FCF record */
+			list_add_tail(&ln->fcfinfo->list, &rln->fcf_lsthead);
+		}
+
+		rv = csio_ln_vnp_read(ln, csio_ln_vnp_read_cbfn);
+		if (rv != 0) {
+			/* TODO: Send HW RESET event */
+			CSIO_INC_STATS(ln, n_err);
+		}
+		break;
+
+	case CSIO_LNE_LINK_DOWN:
+	case CSIO_LNE_DOWN_LINK:
+	case CSIO_LNE_LOGO:
+		csio_ln_dbg(ln,
+			    "ignoring event %d recv from did x%x"
+			    "in ln state[offline].\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_drop);
+		break;
+
+	case CSIO_LNE_CLOSE:
+		csio_set_state(&ln->sm, csio_lns_uninit);
+		csio_post_event_rns(ln, CSIO_RNFE_CLOSE);
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			    "unexp ln event %d recv from did:x%x in "
+			    "ln state[offline]\n", evt, ln->nport_id);
+		CSIO_INC_STATS(ln, n_evt_unexp);
+		CSIO_DB_ASSERT(0);
+		break;
+	} /* switch event */
+}
+
+/*****************************************************************************/
+/* END: Lnode SM                                                             */
+/*****************************************************************************/
+
+static void
+csio_free_fcfinfo(struct kref *kref)
+{
+	struct csio_fcf_info *fcfinfo = container_of(kref,
+						struct csio_fcf_info, kref);
+	kfree(fcfinfo);
+}
+
+/* Helper routines for attributes  */
+/*
+ * csio_lnode_state_to_str - Get current state of FCOE lnode.
+ * @ln - lnode
+ * @str - state of lnode.
+ *
+ */
+void
+csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str)
+{
+	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
+		strcpy(str, "UNINIT");
+		return;
+	}
+	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
+		strcpy(str, "READY");
+		return;
+	}
+	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
+		strcpy(str, "OFFLINE");
+		return;
+	}
+	strcpy(str, "UNKNOWN");
+} /* csio_lnode_state_to_str */
+
+
+int
+csio_get_phy_port_stats(struct csio_hw *hw, uint8_t portid,
+			struct fw_fcoe_port_stats *port_stats)
+{
+	struct csio_mb  *mbp;
+	struct fw_fcoe_port_cmd_params portparams;
+	enum fw_retval retval;
+	int idx;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		csio_err(hw, "FCoE FCF PARAMS command out of memory!\n");
+		return -EINVAL;
+	}
+	portparams.portid = portid;
+
+	for (idx = 1; idx <= 3; idx++) {
+		portparams.idx = (idx-1)*6 + 1;
+		portparams.nstats = 6;
+		if (idx == 3)
+			portparams.nstats = 4;
+		csio_fcoe_read_portparams_init_mb(hw, mbp, CSIO_MB_DEFAULT_TMO,
+							&portparams, NULL);
+		if (csio_mb_issue(hw, mbp)) {
+			csio_err(hw, "Issue of FCoE port params failed!\n");
+			mempool_free(mbp, hw->mb_mempool);
+			return -EINVAL;
+		}
+		csio_mb_process_portparams_rsp(hw, mbp, &retval,
+						&portparams, port_stats);
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+	return 0;
+}
+
+/*
+ * csio_ln_mgmt_wr_handler -Mgmt Work Request handler.
+ * @wr - WR.
+ * @len - WR len.
+ * This handler is invoked when an outstanding mgmt WR is completed.
+ * Its invoked in the context of FW event worker thread for every
+ * mgmt event received.
+ * Return - none.
+ */
+
+static void
+csio_ln_mgmt_wr_handler(struct csio_hw *hw, void *wr, uint32_t len)
+{
+	struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw);
+	struct csio_ioreq *io_req = NULL;
+	struct fw_fcoe_els_ct_wr *wr_cmd;
+
+
+	wr_cmd = (struct fw_fcoe_els_ct_wr *) wr;
+
+	if (len < sizeof(struct fw_fcoe_els_ct_wr)) {
+		csio_err(mgmtm->hw,
+			 "Invalid ELS CT WR length recvd, len:%x\n", len);
+		mgmtm->stats.n_err++;
+		return;
+	}
+
+	io_req = (struct csio_ioreq *) ((uintptr_t) wr_cmd->cookie);
+	io_req->wr_status = csio_wr_status(wr_cmd);
+
+	/* lookup ioreq exists in our active Q */
+	spin_lock_irq(&hw->lock);
+	if (csio_mgmt_req_lookup(mgmtm, io_req) != 0) {
+		csio_err(mgmtm->hw,
+			"Error- Invalid IO handle recv in WR. handle: %p\n",
+			io_req);
+		mgmtm->stats.n_err++;
+		spin_unlock_irq(&hw->lock);
+		return;
+	}
+
+	mgmtm = csio_hw_to_mgmtm(hw);
+
+	/* Dequeue from active queue */
+	list_del_init(&io_req->sm.sm_list);
+	mgmtm->stats.n_active--;
+	spin_unlock_irq(&hw->lock);
+
+	/* io_req will be freed by completion handler */
+	if (io_req->io_cbfn)
+		io_req->io_cbfn(hw, io_req);
+}
+
+/**
+ * csio_fcoe_fwevt_handler - Event handler for Firmware FCoE events.
+ * @hw:		HW module
+ * @cpl_op:	CPL opcode
+ * @cmd:	FW cmd/WR.
+ *
+ * Process received FCoE cmd/WR event from FW.
+ */
+void
+csio_fcoe_fwevt_handler(struct csio_hw *hw, __u8 cpl_op, __be64 *cmd)
+{
+	struct csio_lnode *ln;
+	struct csio_rnode *rn;
+	uint8_t portid, opcode = *(uint8_t *)cmd;
+	struct fw_fcoe_link_cmd *lcmd;
+	struct fw_wr_hdr *wr;
+	struct fw_rdev_wr *rdev_wr;
+	enum fw_fcoe_link_status lstatus;
+	uint32_t fcfi, rdev_flowid, vnpi;
+	enum csio_ln_ev evt;
+
+	if (cpl_op == CPL_FW6_MSG && opcode == FW_FCOE_LINK_CMD) {
+
+		lcmd = (struct fw_fcoe_link_cmd *)cmd;
+		lstatus = lcmd->lstatus;
+		portid = FW_FCOE_LINK_CMD_PORTID_GET(
+					ntohl(lcmd->op_to_portid));
+		fcfi = FW_FCOE_LINK_CMD_FCFI_GET(ntohl(lcmd->sub_opcode_fcfi));
+		vnpi = FW_FCOE_LINK_CMD_VNPI_GET(ntohl(lcmd->vnpi_pkd));
+
+		if (lstatus == FCOE_LINKUP) {
+
+			/* HW lock here */
+			spin_lock_irq(&hw->lock);
+			csio_handle_link_up(hw, portid, fcfi, vnpi);
+			spin_unlock_irq(&hw->lock);
+			/* HW un lock here */
+
+		} else if (lstatus == FCOE_LINKDOWN) {
+
+			/* HW lock here */
+			spin_lock_irq(&hw->lock);
+			csio_handle_link_down(hw, portid, fcfi, vnpi);
+			spin_unlock_irq(&hw->lock);
+			/* HW un lock here */
+		} else {
+			csio_warn(hw, "Unexpected FCOE LINK status:0x%x\n",
+				  lcmd->lstatus);
+			CSIO_INC_STATS(hw, n_cpl_unexp);
+		}
+	} else if (cpl_op == CPL_FW6_PLD) {
+		wr = (struct fw_wr_hdr *) (cmd + 4);
+		if (FW_WR_OP_GET(be32_to_cpu(wr->hi))
+			== FW_RDEV_WR) {
+
+			rdev_wr = (struct fw_rdev_wr *) (cmd + 4);
+
+			rdev_flowid = FW_RDEV_WR_FLOWID_GET(
+					ntohl(rdev_wr->alloc_to_len16));
+			vnpi = FW_RDEV_WR_ASSOC_FLOWID_GET(
+				    ntohl(rdev_wr->flags_to_assoc_flowid));
+
+			csio_dbg(hw,
+				"FW_RDEV_WR: flowid:x%x ev_cause:x%x "
+				"vnpi:0x%x\n", rdev_flowid,
+				rdev_wr->event_cause, vnpi);
+
+			if (rdev_wr->protocol != PROT_FCOE) {
+				csio_err(hw,
+					"FW_RDEV_WR: invalid proto:x%x "
+					"received with flowid:x%x\n",
+					rdev_wr->protocol,
+					rdev_flowid);
+				CSIO_INC_STATS(hw, n_evt_drop);
+				return;
+			}
+
+			/* HW lock here */
+			spin_lock_irq(&hw->lock);
+			ln = csio_ln_lookup_by_vnpi(hw, vnpi);
+			if (!ln) {
+				csio_err(hw,
+					"FW_DEV_WR: invalid vnpi:x%x received "
+					"with flowid:x%x\n", vnpi, rdev_flowid);
+				CSIO_INC_STATS(hw, n_evt_drop);
+				goto out_pld;
+			}
+
+			rn = csio_confirm_rnode(ln, rdev_flowid,
+					&rdev_wr->u.fcoe_rdev);
+			if (!rn) {
+				csio_ln_dbg(ln,
+					"Failed to confirm rnode "
+					"for flowid:x%x\n", rdev_flowid);
+				CSIO_INC_STATS(hw, n_evt_drop);
+				goto out_pld;
+			}
+
+			/* save previous event for debugging */
+			ln->prev_evt = ln->cur_evt;
+			ln->cur_evt = rdev_wr->event_cause;
+			CSIO_INC_STATS(ln, n_evt_fw[rdev_wr->event_cause]);
+
+			/* Translate all the fabric events to lnode SM events */
+			evt = CSIO_FWE_TO_LNE(rdev_wr->event_cause);
+			if (evt) {
+				csio_ln_dbg(ln,
+					"Posting event to lnode event:%d "
+					"cause:%d flowid:x%x\n", evt,
+					rdev_wr->event_cause, rdev_flowid);
+				csio_post_event(&ln->sm, evt);
+			}
+
+			/* Handover event to rn SM here. */
+			csio_rnode_fwevt_handler(rn, rdev_wr->event_cause);
+out_pld:
+			spin_unlock_irq(&hw->lock);
+			return;
+		} else {
+			csio_warn(hw, "unexpected WR op(0x%x) recv\n",
+				FW_WR_OP_GET(be32_to_cpu((wr->hi))));
+			CSIO_INC_STATS(hw, n_cpl_unexp);
+		}
+	} else if (cpl_op == CPL_FW6_MSG) {
+		wr = (struct fw_wr_hdr *) (cmd);
+		if (FW_WR_OP_GET(be32_to_cpu(wr->hi)) == FW_FCOE_ELS_CT_WR) {
+			csio_ln_mgmt_wr_handler(hw, wr,
+					sizeof(struct fw_fcoe_els_ct_wr));
+		} else {
+			csio_warn(hw, "unexpected WR op(0x%x) recv\n",
+				FW_WR_OP_GET(be32_to_cpu((wr->hi))));
+			CSIO_INC_STATS(hw, n_cpl_unexp);
+		}
+	} else {
+		csio_warn(hw, "unexpected CPL op(0x%x) recv\n", opcode);
+		CSIO_INC_STATS(hw, n_cpl_unexp);
+	}
+}
+
+/**
+ * csio_lnode_start - Kickstart lnode discovery.
+ * @ln:		lnode
+ *
+ * This routine kickstarts the discovery by issuing an FCOE_LINK (up) command.
+ */
+int
+csio_lnode_start(struct csio_lnode *ln)
+{
+	int rv = 0;
+	if (csio_is_phys_ln(ln) && !(ln->flags & CSIO_LNF_LINK_ENABLE)) {
+		rv = csio_fcoe_enable_link(ln, 1);
+		ln->flags |= CSIO_LNF_LINK_ENABLE;
+	}
+
+	return rv;
+}
+
+/**
+ * csio_lnode_stop - Stop the lnode.
+ * @ln:		lnode
+ *
+ * This routine is invoked by HW module to stop lnode and its associated NPIV
+ * lnodes.
+ */
+void
+csio_lnode_stop(struct csio_lnode *ln)
+{
+	csio_post_event_lns(ln, CSIO_LNE_DOWN_LINK);
+	if (csio_is_phys_ln(ln) && (ln->flags & CSIO_LNF_LINK_ENABLE)) {
+		csio_fcoe_enable_link(ln, 0);
+		ln->flags &= ~CSIO_LNF_LINK_ENABLE;
+	}
+	csio_ln_dbg(ln, "stopping ln :%p\n", ln);
+}
+
+/**
+ * csio_lnode_close - Close an lnode.
+ * @ln:		lnode
+ *
+ * This routine is invoked by HW module to close an lnode and its
+ * associated NPIV lnodes. Lnode and its associated NPIV lnodes are
+ * set to uninitialized state.
+ */
+void
+csio_lnode_close(struct csio_lnode *ln)
+{
+	csio_post_event_lns(ln, CSIO_LNE_CLOSE);
+	if (csio_is_phys_ln(ln))
+		ln->vnp_flowid = CSIO_INVALID_IDX;
+
+	csio_ln_dbg(ln, "closed ln :%p\n", ln);
+}
+
+/*
+ * csio_ln_prep_ecwr - Prepare ELS/CT WR.
+ * @io_req - IO request.
+ * @wr_len - WR len
+ * @immd_len - WR immediate data
+ * @sub_op - Sub opcode
+ * @sid - source portid.
+ * @did - destination portid
+ * @flow_id - flowid
+ * @fw_wr - ELS/CT WR to be prepared.
+ * Returns: 0 - on success
+ */
+static int
+csio_ln_prep_ecwr(struct csio_ioreq *io_req, uint32_t wr_len,
+		      uint32_t immd_len, uint8_t sub_op, uint32_t sid,
+		      uint32_t did, uint32_t flow_id, uint8_t *fw_wr)
+{
+	struct fw_fcoe_els_ct_wr *wr;
+	__be32 port_id;
+
+	wr  = (struct fw_fcoe_els_ct_wr *)fw_wr;
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_FCOE_ELS_CT_WR) |
+				     FW_FCOE_ELS_CT_WR_IMMDLEN(immd_len));
+
+	wr_len =  DIV_ROUND_UP(wr_len, 16);
+	wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(flow_id) |
+					  FW_WR_LEN16(wr_len));
+	wr->els_ct_type = sub_op;
+	wr->ctl_pri = 0;
+	wr->cp_en_class = 0;
+	wr->cookie = io_req->fw_handle;
+	wr->iqid = cpu_to_be16(csio_q_physiqid(
+					io_req->lnode->hwp, io_req->iq_idx));
+	wr->fl_to_sp =  FW_FCOE_ELS_CT_WR_SP(1);
+	wr->tmo_val = (uint8_t) io_req->tmo;
+	port_id = htonl(sid);
+	memcpy(wr->l_id, PORT_ID_PTR(port_id), 3);
+	port_id = htonl(did);
+	memcpy(wr->r_id, PORT_ID_PTR(port_id), 3);
+
+	/* Prepare RSP SGL */
+	wr->rsp_dmalen = cpu_to_be32(io_req->dma_buf.len);
+	wr->rsp_dmaaddr = cpu_to_be64(io_req->dma_buf.paddr);
+	return 0;
+}
+
+/*
+ * csio_ln_mgmt_submit_wr - Post elsct work request.
+ * @mgmtm - mgmtm
+ * @io_req - io request.
+ * @sub_op - ELS or CT request type
+ * @pld - Dma Payload buffer
+ * @pld_len - Payload len
+ * Prepares ELSCT Work request and sents it to FW.
+ * Returns: 0 - on success
+ */
+static int
+csio_ln_mgmt_submit_wr(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req,
+		uint8_t sub_op, struct csio_dma_buf *pld,
+		uint32_t pld_len)
+{
+	struct csio_wr_pair wrp;
+	struct csio_lnode *ln = io_req->lnode;
+	struct csio_rnode *rn = io_req->rnode;
+	struct	csio_hw	*hw = mgmtm->hw;
+	uint8_t fw_wr[64];
+	struct ulptx_sgl dsgl;
+	uint32_t wr_size = 0;
+	uint8_t im_len = 0;
+	uint32_t wr_off = 0;
+
+	int ret = 0;
+
+	/* Calculate WR Size for this ELS REQ */
+	wr_size = sizeof(struct fw_fcoe_els_ct_wr);
+
+	/* Send as immediate data if pld < 256 */
+	if (pld_len < 256) {
+		wr_size += ALIGN(pld_len, 8);
+		im_len = (uint8_t)pld_len;
+	} else
+		wr_size += sizeof(struct ulptx_sgl);
+
+	/* Roundup WR size in units of 16 bytes */
+	wr_size = ALIGN(wr_size, 16);
+
+	/* Get WR to send ELS REQ */
+	ret = csio_wr_get(hw, mgmtm->eq_idx, wr_size, &wrp);
+	if (ret != 0) {
+		csio_err(hw, "Failed to get WR for ec_req %p ret:%d\n",
+			io_req, ret);
+		return ret;
+	}
+
+	/* Prepare Generic WR used by all ELS/CT cmd */
+	csio_ln_prep_ecwr(io_req, wr_size, im_len, sub_op,
+				ln->nport_id, rn->nport_id,
+				csio_rn_flowid(rn),
+				&fw_wr[0]);
+
+	/* Copy ELS/CT WR CMD */
+	csio_wr_copy_to_wrp(&fw_wr[0], &wrp, wr_off,
+			sizeof(struct fw_fcoe_els_ct_wr));
+	wr_off += sizeof(struct fw_fcoe_els_ct_wr);
+
+	/* Copy payload to Immediate section of WR */
+	if (im_len)
+		csio_wr_copy_to_wrp(pld->vaddr, &wrp, wr_off, im_len);
+	else {
+		/* Program DSGL to dma payload */
+		dsgl.cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) |
+					ULPTX_MORE | ULPTX_NSGE(1));
+		dsgl.len0 = cpu_to_be32(pld_len);
+		dsgl.addr0 = cpu_to_be64(pld->paddr);
+		csio_wr_copy_to_wrp(&dsgl, &wrp, ALIGN(wr_off, 8),
+				   sizeof(struct ulptx_sgl));
+	}
+
+	/* Issue work request to xmit ELS/CT req to FW */
+	csio_wr_issue(mgmtm->hw, mgmtm->eq_idx, false);
+	return ret;
+}
+
+/*
+ * csio_ln_mgmt_submit_req - Submit FCOE Mgmt request.
+ * @io_req - IO Request
+ * @io_cbfn - Completion handler.
+ * @req_type - ELS or CT request type
+ * @pld - Dma Payload buffer
+ * @pld_len - Payload len
+ *
+ *
+ * This API used submit managment ELS/CT request.
+ * This called with hw lock held
+ * Returns: 0 - on success
+ *	    -ENOMEM	- on error.
+ */
+static int
+csio_ln_mgmt_submit_req(struct csio_ioreq *io_req,
+		void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *),
+		enum fcoe_cmn_type req_type, struct csio_dma_buf *pld,
+		uint32_t pld_len)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(io_req->lnode);
+	struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw);
+	int rv;
+
+	io_req->io_cbfn = io_cbfn;	/* Upper layer callback handler */
+	io_req->fw_handle = (uintptr_t) (io_req);
+	io_req->eq_idx = mgmtm->eq_idx;
+	io_req->iq_idx = mgmtm->iq_idx;
+
+	rv = csio_ln_mgmt_submit_wr(mgmtm, io_req, req_type, pld, pld_len);
+	if (rv == 0) {
+		list_add_tail(&io_req->sm.sm_list, &mgmtm->active_q);
+		mgmtm->stats.n_active++;
+	}
+	return rv;
+}
+
+/*
+ * csio_ln_fdmi_init - FDMI Init entry point.
+ * @ln: lnode
+ */
+static int
+csio_ln_fdmi_init(struct csio_lnode *ln)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_dma_buf	*dma_buf;
+
+	/* Allocate MGMT request required for FDMI */
+	ln->mgmt_req = kzalloc(sizeof(struct csio_ioreq), GFP_KERNEL);
+	if (!ln->mgmt_req) {
+		csio_ln_err(ln, "Failed to alloc ioreq for FDMI\n");
+		CSIO_INC_STATS(hw, n_err_nomem);
+		return -ENOMEM;
+	}
+
+	/* Allocate Dma buffers for FDMI response Payload */
+	dma_buf = &ln->mgmt_req->dma_buf;
+	dma_buf->len = 2048;
+	dma_buf->vaddr = pci_alloc_consistent(hw->pdev, dma_buf->len,
+						&dma_buf->paddr);
+	if (!dma_buf->vaddr) {
+		csio_err(hw, "Failed to alloc DMA buffer for FDMI!\n");
+		kfree(ln->mgmt_req);
+		ln->mgmt_req = NULL;
+		return -ENOMEM;
+	}
+
+	ln->flags |= CSIO_LNF_FDMI_ENABLE;
+	return 0;
+}
+
+/*
+ * csio_ln_fdmi_exit - FDMI exit entry point.
+ * @ln: lnode
+ */
+static int
+csio_ln_fdmi_exit(struct csio_lnode *ln)
+{
+	struct csio_dma_buf *dma_buf;
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	if (!ln->mgmt_req)
+		return 0;
+
+	dma_buf = &ln->mgmt_req->dma_buf;
+	if (dma_buf->vaddr)
+		pci_free_consistent(hw->pdev, dma_buf->len, dma_buf->vaddr,
+				    dma_buf->paddr);
+
+	kfree(ln->mgmt_req);
+	return 0;
+}
+
+int
+csio_scan_done(struct csio_lnode *ln, unsigned long ticks,
+		unsigned long time, unsigned long max_scan_ticks,
+		unsigned long delta_scan_ticks)
+{
+	int rv = 0;
+
+	if (time >= max_scan_ticks)
+		return 1;
+
+	if (!ln->tgt_scan_tick)
+		ln->tgt_scan_tick = ticks;
+
+	if (((ticks - ln->tgt_scan_tick) >= delta_scan_ticks)) {
+		if (!ln->last_scan_ntgts)
+			ln->last_scan_ntgts = ln->n_scsi_tgts;
+		else {
+			if (ln->last_scan_ntgts == ln->n_scsi_tgts)
+				return 1;
+
+			ln->last_scan_ntgts = ln->n_scsi_tgts;
+		}
+		ln->tgt_scan_tick = ticks;
+	}
+	return rv;
+}
+
+/*
+ * csio_notify_lnodes:
+ * @hw: HW module
+ * @note: Notification
+ *
+ * Called from the HW SM to fan out notifications to the
+ * Lnode SM. Since the HW SM is entered with lock held,
+ * there is no need to hold locks here.
+ *
+ */
+void
+csio_notify_lnodes(struct csio_hw *hw, enum csio_ln_notify note)
+{
+	struct list_head *tmp;
+	struct csio_lnode *ln;
+
+	csio_dbg(hw, "Notifying all nodes of event %d\n", note);
+
+	/* Traverse children lnodes list and send evt */
+	list_for_each(tmp, &hw->sln_head) {
+		ln = (struct csio_lnode *) tmp;
+
+		switch (note) {
+		case CSIO_LN_NOTIFY_HWREADY:
+			csio_lnode_start(ln);
+			break;
+
+		case CSIO_LN_NOTIFY_HWRESET:
+		case CSIO_LN_NOTIFY_HWREMOVE:
+			csio_lnode_close(ln);
+			break;
+
+		case CSIO_LN_NOTIFY_HWSTOP:
+			csio_lnode_stop(ln);
+			break;
+
+		default:
+			break;
+
+		}
+	}
+}
+
+/*
+ * csio_disable_lnodes:
+ * @hw: HW module
+ * @portid:port id
+ * @disable: disable/enable flag.
+ * If disable=1, disables all lnode hosted on given physical port.
+ * otherwise enables all the lnodes on given phsysical port.
+ * This routine need to called with hw lock held.
+ */
+void
+csio_disable_lnodes(struct csio_hw *hw, uint8_t portid, bool disable)
+{
+	struct list_head *tmp;
+	struct csio_lnode *ln;
+
+	csio_dbg(hw, "Notifying event to all nodes of port:%d\n", portid);
+
+	/* Traverse sibling lnodes list and send evt */
+	list_for_each(tmp, &hw->sln_head) {
+		ln = (struct csio_lnode *) tmp;
+		if (ln->portid != portid)
+			continue;
+
+		if (disable)
+			csio_lnode_stop(ln);
+		else
+			csio_lnode_start(ln);
+	}
+}
+
+/*
+ * csio_ln_init - Initialize an lnode.
+ * @ln:		lnode
+ *
+ */
+static int
+csio_ln_init(struct csio_lnode *ln)
+{
+	int rv = -EINVAL;
+	struct csio_lnode *rln, *pln;
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	csio_init_state(&ln->sm, csio_lns_uninit);
+	ln->vnp_flowid = CSIO_INVALID_IDX;
+	ln->fcf_flowid = CSIO_INVALID_IDX;
+
+	if (csio_is_root_ln(ln)) {
+
+		/* This is the lnode used during initialization */
+
+		ln->fcfinfo = kzalloc(sizeof(struct csio_fcf_info), GFP_KERNEL);
+		if (!ln->fcfinfo) {
+			csio_ln_err(ln, "Failed to alloc FCF record\n");
+			CSIO_INC_STATS(hw, n_err_nomem);
+			goto err;
+		}
+
+		INIT_LIST_HEAD(&ln->fcf_lsthead);
+		kref_init(&ln->fcfinfo->kref);
+
+		if (csio_fdmi_enable && csio_ln_fdmi_init(ln))
+			goto err;
+
+	} else { /* Either a non-root physical or a virtual lnode */
+
+		/*
+		 * THe rest is common for non-root physical and NPIV lnodes.
+		 * Just get references to all other modules
+		 */
+		rln = csio_root_lnode(ln);
+
+		if (csio_is_npiv_ln(ln)) {
+			/* NPIV */
+			pln = csio_parent_lnode(ln);
+			kref_get(&pln->fcfinfo->kref);
+			ln->fcfinfo = pln->fcfinfo;
+		} else {
+			/* Another non-root physical lnode (FCF) */
+			ln->fcfinfo = kzalloc(sizeof(struct csio_fcf_info),
+								GFP_KERNEL);
+			if (!ln->fcfinfo) {
+				csio_ln_err(ln, "Failed to alloc FCF info\n");
+				CSIO_INC_STATS(hw, n_err_nomem);
+				goto err;
+			}
+
+			kref_init(&ln->fcfinfo->kref);
+
+			if (csio_fdmi_enable && csio_ln_fdmi_init(ln))
+				goto err;
+		}
+
+	} /* if (!csio_is_root_ln(ln)) */
+
+	return 0;
+err:
+	return rv;
+}
+
+static void
+csio_ln_exit(struct csio_lnode *ln)
+{
+	struct csio_lnode *pln;
+
+	csio_cleanup_rns(ln);
+	if (csio_is_npiv_ln(ln)) {
+		pln = csio_parent_lnode(ln);
+		kref_put(&pln->fcfinfo->kref, csio_free_fcfinfo);
+	} else {
+		kref_put(&ln->fcfinfo->kref, csio_free_fcfinfo);
+		if (csio_fdmi_enable)
+			csio_ln_fdmi_exit(ln);
+	}
+	ln->fcfinfo = NULL;
+}
+
+/**
+ * csio_lnode_init - Initialize the members of an lnode.
+ * @ln:		lnode
+ *
+ */
+int
+csio_lnode_init(struct csio_lnode *ln, struct csio_hw *hw,
+		struct csio_lnode *pln)
+{
+	int rv = -EINVAL;
+
+	/* Link this lnode to hw */
+	csio_lnode_to_hw(ln)	= hw;
+
+	/* Link child to parent if child lnode */
+	if (pln)
+		ln->pln = pln;
+	else
+		ln->pln = NULL;
+
+	/* Initialize scsi_tgt and timers to zero */
+	ln->n_scsi_tgts = 0;
+	ln->last_scan_ntgts = 0;
+	ln->tgt_scan_tick = 0;
+
+	/* Initialize rnode list */
+	INIT_LIST_HEAD(&ln->rnhead);
+	INIT_LIST_HEAD(&ln->cln_head);
+
+	/* Initialize log level for debug */
+	ln->params.log_level	= hw->params.log_level;
+
+	if (csio_ln_init(ln))
+		goto err;
+
+	/* Add lnode to list of sibling or children lnodes */
+	spin_lock_irq(&hw->lock);
+	list_add_tail(&ln->sm.sm_list, pln ? &pln->cln_head : &hw->sln_head);
+	if (pln)
+		pln->num_vports++;
+	spin_unlock_irq(&hw->lock);
+
+	hw->num_lns++;
+
+	return 0;
+err:
+	csio_lnode_to_hw(ln) = NULL;
+	return rv;
+}
+
+/**
+ * csio_lnode_exit - De-instantiate an lnode.
+ * @ln:		lnode
+ *
+ */
+void
+csio_lnode_exit(struct csio_lnode *ln)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	csio_ln_exit(ln);
+
+	/* Remove this lnode from hw->sln_head */
+	spin_lock_irq(&hw->lock);
+
+	list_del_init(&ln->sm.sm_list);
+
+	/* If it is children lnode, decrement the
+	 * counter in its parent lnode
+	 */
+	if (ln->pln)
+		ln->pln->num_vports--;
+
+	/* Update root lnode pointer */
+	if (list_empty(&hw->sln_head))
+		hw->rln = NULL;
+	else
+		hw->rln = (struct csio_lnode *)csio_list_next(&hw->sln_head);
+
+	spin_unlock_irq(&hw->lock);
+
+	csio_lnode_to_hw(ln)	= NULL;
+	hw->num_lns--;
+}
diff --git a/drivers/scsi/csiostor/csio_lnode.h b/drivers/scsi/csiostor/csio_lnode.h
new file mode 100644
index 0000000..8d84988
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_lnode.h
@@ -0,0 +1,255 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_LNODE_H__
+#define __CSIO_LNODE_H__
+
+#include <linux/kref.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <scsi/fc/fc_els.h>
+
+
+#include "csio_defs.h"
+#include "csio_hw.h"
+
+#define CSIO_FCOE_MAX_NPIV	128
+#define CSIO_FCOE_MAX_RNODES	2048
+
+/* FDMI port attribute unknown speed */
+#define CSIO_HBA_PORTSPEED_UNKNOWN	0x8000
+
+extern int csio_fcoe_rnodes;
+extern int csio_fdmi_enable;
+
+/* State machine evets */
+enum csio_ln_ev {
+	CSIO_LNE_NONE = (uint32_t)0,
+	CSIO_LNE_LINKUP,
+	CSIO_LNE_FAB_INIT_DONE,
+	CSIO_LNE_LINK_DOWN,
+	CSIO_LNE_DOWN_LINK,
+	CSIO_LNE_LOGO,
+	CSIO_LNE_CLOSE,
+	CSIO_LNE_MAX_EVENT,
+};
+
+
+struct csio_fcf_info {
+	struct list_head	list;
+	uint8_t			priority;
+	uint8_t			mac[6];
+	uint8_t			name_id[8];
+	uint8_t			fabric[8];
+	uint16_t		vf_id;
+	uint8_t			vlan_id;
+	uint16_t		max_fcoe_size;
+	uint8_t			fc_map[3];
+	uint32_t		fka_adv;
+	uint32_t		fcfi;
+	uint8_t			get_next:1;
+	uint8_t			link_aff:1;
+	uint8_t			fpma:1;
+	uint8_t			spma:1;
+	uint8_t			login:1;
+	uint8_t			portid;
+	uint8_t			spma_mac[6];
+	struct kref		kref;
+};
+
+/* Defines for flags */
+#define	CSIO_LNF_FIPSUPP		0x00000001	/* Fip Supported */
+#define	CSIO_LNF_NPIVSUPP		0x00000002	/* NPIV supported */
+#define CSIO_LNF_LINK_ENABLE		0x00000004	/* Link enabled */
+#define	CSIO_LNF_FDMI_ENABLE		0x00000008	/* FDMI support */
+
+/* Transport events */
+enum csio_ln_fc_evt {
+	CSIO_LN_FC_LINKUP = 1,
+	CSIO_LN_FC_LINKDOWN,
+	CSIO_LN_FC_RSCN,
+	CSIO_LN_FC_ATTRIB_UPDATE,
+};
+
+/* Lnode stats */
+struct csio_lnode_stats {
+	uint32_t	n_link_up;	/* Link down */
+	uint32_t	n_link_down;	/* Link up */
+	uint32_t	n_err;		/* error */
+	uint32_t	n_err_nomem;	/* memory not available */
+	uint32_t	n_inval_parm;   /* Invalid parameters */
+	uint32_t	n_evt_unexp;	/* unexpected event */
+	uint32_t	n_evt_drop;	/* dropped event */
+	uint32_t	n_rnode_match;  /* matched rnode */
+	uint32_t	n_dev_loss_tmo; /* Device loss timeout */
+	uint32_t	n_fdmi_err;	/* fdmi err */
+	uint32_t	n_evt_fw[RSCN_DEV_LOST];	/* fw events */
+	enum csio_ln_ev	n_evt_sm[CSIO_LNE_MAX_EVENT];	/* State m/c events */
+	uint32_t	n_rnode_alloc;	/* rnode allocated */
+	uint32_t	n_rnode_free;	/* rnode freed */
+	uint32_t	n_rnode_nomem;	/* rnode alloc failure */
+	uint32_t        n_input_requests; /* Input Requests */
+	uint32_t        n_output_requests; /* Output Requests */
+	uint32_t        n_control_requests; /* Control Requests */
+	uint32_t        n_input_bytes; /* Input Bytes */
+	uint32_t        n_output_bytes; /* Output Bytes */
+	uint32_t	rsvd1;
+};
+
+/* Common Lnode params */
+struct csio_lnode_params {
+	uint32_t	ra_tov;
+	uint32_t	fcfi;
+	uint32_t	log_level;	/* Module level for debugging */
+};
+
+struct csio_service_parms {
+	struct fc_els_csp	csp;		/* Common service parms */
+	uint8_t			wwpn[8];	/* WWPN */
+	uint8_t			wwnn[8];	/* WWNN */
+	struct fc_els_cssp	clsp[4];	/* Class service params */
+	uint8_t			vvl[16];	/* Vendor version level */
+};
+
+/* Lnode */
+struct csio_lnode {
+	struct csio_sm		sm;		/* State machine + sibling
+						 * lnode list.
+						 */
+	struct csio_hw		*hwp;		/* Pointer to the HW module */
+	uint8_t			portid;		/* Port ID */
+	uint8_t			rsvd1;
+	uint16_t		rsvd2;
+	uint32_t		dev_num;	/* Device number */
+	uint32_t		flags;		/* Flags */
+	struct list_head	fcf_lsthead;	/* FCF entries */
+	struct csio_fcf_info	*fcfinfo;	/* FCF in use */
+	struct csio_ioreq	*mgmt_req;	/* MGMT request */
+
+	/* FCoE identifiers */
+	uint8_t			mac[6];
+	uint32_t		nport_id;
+	struct csio_service_parms ln_sparm;	/* Service parms */
+
+	/* Firmware identifiers */
+	uint32_t		fcf_flowid;	/*fcf flowid */
+	uint32_t		vnp_flowid;
+	uint16_t		ssn_cnt;	/* Registered Session */
+	uint8_t			cur_evt;	/* Current event */
+	uint8_t			prev_evt;	/* Previous event */
+
+	/* Children */
+	struct list_head	cln_head;	/* Head of the children lnode
+						 * list.
+						 */
+	uint32_t		num_vports;	/* Total NPIV/children LNodes*/
+	struct csio_lnode	*pln;		/* Parent lnode of child
+						 * lnodes.
+						 */
+	struct list_head	cmpl_q;		/* Pending I/Os on this lnode */
+
+	/* Remote node information */
+	struct list_head	rnhead;		/* Head of rnode list */
+	uint32_t		num_reg_rnodes;	/* Number of rnodes registered
+						 * with the host.
+						 */
+	uint32_t		n_scsi_tgts;	/* Number of scsi targets
+						 * found
+						 */
+	uint32_t		last_scan_ntgts;/* Number of scsi targets
+						 * found per last scan.
+						 */
+	uint32_t		tgt_scan_tick;	/* timer started after
+						 * new tgt found
+						 */
+	/* FC transport data */
+	struct fc_vport		*fc_vport;
+	struct fc_host_statistics fch_stats;
+
+	struct csio_lnode_stats stats;		/* Common lnode stats */
+	struct csio_lnode_params params;	/* Common lnode params */
+};
+
+#define	csio_lnode_to_hw(ln)	((ln)->hwp)
+#define csio_root_lnode(ln)	(csio_lnode_to_hw((ln))->rln)
+#define csio_parent_lnode(ln)	((ln)->pln)
+#define	csio_ln_flowid(ln)	((ln)->vnp_flowid)
+#define csio_ln_wwpn(ln)	((ln)->ln_sparm.wwpn)
+#define csio_ln_wwnn(ln)	((ln)->ln_sparm.wwnn)
+
+#define csio_is_root_ln(ln)	(((ln) == csio_root_lnode((ln))) ? 1 : 0)
+#define csio_is_phys_ln(ln)	(((ln)->pln == NULL) ? 1 : 0)
+#define csio_is_npiv_ln(ln)	(((ln)->pln != NULL) ? 1 : 0)
+
+
+#define csio_ln_dbg(_ln, _fmt, ...)	\
+	csio_dbg(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \
+		 CSIO_DEVID_LO(_ln), ##__VA_ARGS__);
+
+#define csio_ln_err(_ln, _fmt, ...)	\
+	csio_err(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \
+		 CSIO_DEVID_LO(_ln), ##__VA_ARGS__);
+
+#define csio_ln_warn(_ln, _fmt, ...)	\
+	csio_warn(_ln->hwp, "%x:%x "_fmt, CSIO_DEVID_HI(_ln), \
+		 CSIO_DEVID_LO(_ln), ##__VA_ARGS__);
+
+/* HW->Lnode notifications */
+enum csio_ln_notify {
+	CSIO_LN_NOTIFY_HWREADY = 1,
+	CSIO_LN_NOTIFY_HWSTOP,
+	CSIO_LN_NOTIFY_HWREMOVE,
+	CSIO_LN_NOTIFY_HWRESET,
+};
+
+void csio_fcoe_fwevt_handler(struct csio_hw *,  __u8 cpl_op, __be64 *);
+int csio_is_lnode_ready(struct csio_lnode *);
+void csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str);
+struct csio_lnode *csio_lnode_lookup_by_wwpn(struct csio_hw *, uint8_t *);
+int csio_get_phy_port_stats(struct csio_hw *, uint8_t ,
+				      struct fw_fcoe_port_stats *);
+int csio_scan_done(struct csio_lnode *, unsigned long, unsigned long,
+		   unsigned long, unsigned long);
+void csio_notify_lnodes(struct csio_hw *, enum csio_ln_notify);
+void csio_disable_lnodes(struct csio_hw *, uint8_t, bool);
+void csio_lnode_async_event(struct csio_lnode *, enum csio_ln_fc_evt);
+int csio_ln_fdmi_start(struct csio_lnode *, void *);
+int csio_lnode_start(struct csio_lnode *);
+void csio_lnode_stop(struct csio_lnode *);
+void csio_lnode_close(struct csio_lnode *);
+int csio_lnode_init(struct csio_lnode *, struct csio_hw *,
+			      struct csio_lnode *);
+void csio_lnode_exit(struct csio_lnode *);
+
+#endif /* ifndef __CSIO_LNODE_H__ */
diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c
new file mode 100644
index 0000000..5b27c48
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_mb.c
@@ -0,0 +1,1750 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_fc.h>
+
+#include "csio_hw.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+#include "csio_mb.h"
+#include "csio_wr.h"
+
+#define csio_mb_is_host_owner(__owner)		((__owner) == CSIO_MBOWNER_PL)
+
+/* MB Command/Response Helpers */
+/*
+ * csio_mb_fw_retval - FW return value from a mailbox response.
+ * @mbp: Mailbox structure
+ *
+ */
+enum fw_retval
+csio_mb_fw_retval(struct csio_mb *mbp)
+{
+	struct fw_cmd_hdr *hdr;
+
+	hdr = (struct fw_cmd_hdr *)(mbp->mb);
+
+	return FW_CMD_RETVAL_GET(ntohl(hdr->lo));
+}
+
+/*
+ * csio_mb_hello - FW HELLO command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @m_mbox: Master mailbox number, if any.
+ * @a_mbox: Mailbox number for asycn notifications.
+ * @master: Device mastership.
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_hello(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	      uint32_t m_mbox, uint32_t a_mbox, enum csio_dev_master master,
+	      void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_hello_cmd *cmdp = (struct fw_hello_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_HELLO_CMD) |
+				       FW_CMD_REQUEST | FW_CMD_WRITE);
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->err_to_clearinit = htonl(
+		FW_HELLO_CMD_MASTERDIS(master == CSIO_MASTER_CANT)	|
+		FW_HELLO_CMD_MASTERFORCE(master == CSIO_MASTER_MUST)	|
+		FW_HELLO_CMD_MBMASTER(master == CSIO_MASTER_MUST ?
+				m_mbox : FW_HELLO_CMD_MBMASTER_MASK)	|
+		FW_HELLO_CMD_MBASYNCNOT(a_mbox) |
+		FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) |
+		FW_HELLO_CMD_CLEARINIT);
+
+}
+
+/*
+ * csio_mb_process_hello_rsp - FW HELLO response processing helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @retval: Mailbox return value from Firmware
+ * @state: State that the function is in.
+ * @mpfn: Master pfn
+ *
+ */
+void
+csio_mb_process_hello_rsp(struct csio_hw *hw, struct csio_mb *mbp,
+			  enum fw_retval *retval, enum csio_dev_state *state,
+			  uint8_t *mpfn)
+{
+	struct fw_hello_cmd *rsp = (struct fw_hello_cmd *)(mbp->mb);
+	uint32_t value;
+
+	*retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16));
+
+	if (*retval == FW_SUCCESS) {
+		hw->fwrev = ntohl(rsp->fwrev);
+
+		value = ntohl(rsp->err_to_clearinit);
+		*mpfn = FW_HELLO_CMD_MBMASTER_GET(value);
+
+		if (value & FW_HELLO_CMD_INIT)
+			*state = CSIO_DEV_STATE_INIT;
+		else if (value & FW_HELLO_CMD_ERR)
+			*state = CSIO_DEV_STATE_ERR;
+		else
+			*state = CSIO_DEV_STATE_UNINIT;
+	}
+}
+
+/*
+ * csio_mb_bye - FW BYE command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_bye(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	    void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_bye_cmd *cmdp = (struct fw_bye_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_BYE_CMD) |
+				       FW_CMD_REQUEST | FW_CMD_WRITE);
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+}
+
+/*
+ * csio_mb_reset - FW RESET command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @reset: Type of reset.
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_reset(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	      int reset, int halt,
+	      void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_reset_cmd *cmdp = (struct fw_reset_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_RESET_CMD) |
+				  FW_CMD_REQUEST | FW_CMD_WRITE);
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->val = htonl(reset);
+	cmdp->halt_pkd = htonl(halt);
+
+}
+
+/*
+ * csio_mb_params - FW PARAMS command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @tmo: Command timeout.
+ * @pf: PF number.
+ * @vf: VF number.
+ * @nparams: Number of paramters
+ * @params: Parameter mnemonic array.
+ * @val: Parameter value array.
+ * @wr: Write/Read PARAMS.
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_params(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	       unsigned int pf, unsigned int vf, unsigned int nparams,
+	       const u32 *params, u32 *val, bool wr,
+	       void (*cbfn)(struct csio_hw *, struct csio_mb *))
+{
+	uint32_t i;
+	uint32_t temp_params = 0, temp_val = 0;
+	struct fw_params_cmd *cmdp = (struct fw_params_cmd *)(mbp->mb);
+	__be32 *p = &cmdp->param[0].mnem;
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD)		|
+				FW_CMD_REQUEST				|
+				(wr ? FW_CMD_WRITE : FW_CMD_READ)	|
+				FW_PARAMS_CMD_PFN(pf)			|
+				FW_PARAMS_CMD_VFN(vf));
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	/* Write Params */
+	if (wr) {
+		while (nparams--) {
+			temp_params = *params++;
+			temp_val = *val++;
+
+			*p++ = htonl(temp_params);
+			*p++ = htonl(temp_val);
+		}
+	} else {
+		for (i = 0; i < nparams; i++, p += 2) {
+			temp_params = *params++;
+			*p = htonl(temp_params);
+		}
+	}
+
+}
+
+/*
+ * csio_mb_process_read_params_rsp - FW PARAMS response processing helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @retval: Mailbox return value from Firmware
+ * @nparams: Number of parameters
+ * @val: Parameter value array.
+ *
+ */
+void
+csio_mb_process_read_params_rsp(struct csio_hw *hw, struct csio_mb *mbp,
+			   enum fw_retval *retval, unsigned int nparams,
+			   u32 *val)
+{
+	struct fw_params_cmd *rsp = (struct fw_params_cmd *)(mbp->mb);
+	uint32_t i;
+	__be32 *p = &rsp->param[0].val;
+
+	*retval = FW_CMD_RETVAL_GET(ntohl(rsp->retval_len16));
+
+	if (*retval == FW_SUCCESS)
+		for (i = 0; i < nparams; i++, p += 2)
+			*val++ = ntohl(*p);
+}
+
+/*
+ * csio_mb_ldst - FW LDST command
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @tmo: timeout
+ * @reg: register
+ *
+ */
+void
+csio_mb_ldst(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo, int reg)
+{
+	struct fw_ldst_cmd *ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);
+	CSIO_INIT_MBP(mbp, ldst_cmd, tmo, hw, NULL, 1);
+
+	/*
+	 * Construct and send the Firmware LDST Command to retrieve the
+	 * specified PCI-E Configuration Space register.
+	 */
+	ldst_cmd->op_to_addrspace =
+			htonl(FW_CMD_OP(FW_LDST_CMD)	|
+			FW_CMD_REQUEST			|
+			FW_CMD_READ			|
+			FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FUNC_PCIE));
+	ldst_cmd->cycles_to_len16 = htonl(FW_LEN16(struct fw_ldst_cmd));
+	ldst_cmd->u.pcie.select_naccess = FW_LDST_CMD_NACCESS(1);
+	ldst_cmd->u.pcie.ctrl_to_fn =
+		(FW_LDST_CMD_LC | FW_LDST_CMD_FN(hw->pfn));
+	ldst_cmd->u.pcie.r = (uint8_t)reg;
+}
+
+/*
+ *
+ * csio_mb_caps_config - FW Read/Write Capabilities command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @wr: Write if 1, Read if 0
+ * @init: Turn on initiator mode.
+ * @tgt: Turn on target mode.
+ * @cofld:  If 1, Control Offload for FCoE
+ * @cbfn: Callback, if any.
+ *
+ * This helper assumes that cmdp has MB payload from a previous CAPS
+ * read command.
+ */
+void
+csio_mb_caps_config(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+		    bool wr, bool init, bool tgt, bool cofld,
+		    void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_caps_config_cmd *cmdp =
+				(struct fw_caps_config_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, wr ? 0 : 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+				  FW_CMD_REQUEST		|
+				  (wr ? FW_CMD_WRITE : FW_CMD_READ));
+	cmdp->cfvalid_to_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	/* Read config */
+	if (!wr)
+		return;
+
+	/* Write config */
+	cmdp->fcoecaps = 0;
+
+	if (cofld)
+		cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_CTRL_OFLD);
+	if (init)
+		cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_INITIATOR);
+	if (tgt)
+		cmdp->fcoecaps |= htons(FW_CAPS_CONFIG_FCOE_TARGET);
+}
+
+void
+csio_rss_glb_config(struct csio_hw *hw, struct csio_mb *mbp,
+		    uint32_t tmo, uint8_t mode, unsigned int flags,
+		    void (*cbfn)(struct csio_hw *, struct csio_mb *))
+{
+	struct fw_rss_glb_config_cmd *cmdp =
+				(struct fw_rss_glb_config_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
+				  FW_CMD_REQUEST | FW_CMD_WRITE);
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
+		cmdp->u.manual.mode_pkd =
+			htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
+	} else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
+		cmdp->u.basicvirtual.mode_pkd =
+			htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
+		cmdp->u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags);
+	}
+}
+
+
+/*
+ * csio_mb_pfvf - FW Write PF/VF capabilities command helper.
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @pf:
+ * @vf:
+ * @txq:
+ * @txq_eht_ctrl:
+ * @rxqi:
+ * @rxq:
+ * @tc:
+ * @vi:
+ * @pmask:
+ * @rcaps:
+ * @wxcaps:
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_pfvf(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	     unsigned int pf, unsigned int vf, unsigned int txq,
+	     unsigned int txq_eth_ctrl, unsigned int rxqi,
+	     unsigned int rxq, unsigned int tc, unsigned int vi,
+	     unsigned int cmask, unsigned int pmask, unsigned int nexactf,
+	     unsigned int rcaps, unsigned int wxcaps,
+	     void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_pfvf_cmd *cmdp = (struct fw_pfvf_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_PFVF_CMD)			|
+				FW_CMD_REQUEST				|
+				FW_CMD_WRITE				|
+				FW_PFVF_CMD_PFN(pf)			|
+				FW_PFVF_CMD_VFN(vf));
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT(rxqi)		|
+					     FW_PFVF_CMD_NIQ(rxq));
+
+	cmdp->type_to_neq = htonl(FW_PFVF_CMD_TYPE			|
+				  FW_PFVF_CMD_CMASK(cmask)		|
+				  FW_PFVF_CMD_PMASK(pmask)		|
+				  FW_PFVF_CMD_NEQ(txq));
+	cmdp->tc_to_nexactf = htonl(FW_PFVF_CMD_TC(tc)			|
+				    FW_PFVF_CMD_NVI(vi)			|
+				    FW_PFVF_CMD_NEXACTF(nexactf));
+	cmdp->r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS(rcaps)	|
+					 FW_PFVF_CMD_WX_CAPS(wxcaps)	|
+					 FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl));
+}
+
+#define CSIO_ADVERT_MASK     (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
+			      FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG)
+
+/*
+ * csio_mb_port- FW PORT command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @tmo: COmmand timeout
+ * @portid: Port ID to get/set info
+ * @wr: Write/Read PORT information.
+ * @fc: Flow control
+ * @caps: Port capabilites to set.
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_port(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+	     uint8_t portid, bool wr, uint32_t fc, uint16_t caps,
+	     void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_port_cmd *cmdp = (struct fw_port_cmd *)(mbp->mb);
+	unsigned int lfc = 0, mdi = FW_PORT_MDI(FW_PORT_MDI_AUTO);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn,  1);
+
+	cmdp->op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD)		|
+				   FW_CMD_REQUEST			|
+				   (wr ? FW_CMD_EXEC : FW_CMD_READ)	|
+				   FW_PORT_CMD_PORTID(portid));
+	if (!wr) {
+		cmdp->action_to_len16 = htonl(
+			FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) |
+			FW_CMD_LEN16(sizeof(*cmdp) / 16));
+		return;
+	}
+
+	/* Set port */
+	cmdp->action_to_len16 = htonl(
+			FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
+			FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	if (fc & PAUSE_RX)
+		lfc |= FW_PORT_CAP_FC_RX;
+	if (fc & PAUSE_TX)
+		lfc |= FW_PORT_CAP_FC_TX;
+
+	if (!(caps & FW_PORT_CAP_ANEG))
+		cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) | lfc);
+	else
+		cmdp->u.l1cfg.rcap = htonl((caps & CSIO_ADVERT_MASK) |
+								lfc | mdi);
+}
+
+/*
+ * csio_mb_process_read_port_rsp - FW PORT command response processing helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @retval: Mailbox return value from Firmware
+ * @caps: port capabilities
+ *
+ */
+void
+csio_mb_process_read_port_rsp(struct csio_hw *hw, struct csio_mb *mbp,
+			 enum fw_retval *retval, uint16_t *caps)
+{
+	struct fw_port_cmd *rsp = (struct fw_port_cmd *)(mbp->mb);
+
+	*retval = FW_CMD_RETVAL_GET(ntohl(rsp->action_to_len16));
+
+	if (*retval == FW_SUCCESS)
+		*caps = ntohs(rsp->u.info.pcap);
+}
+
+/*
+ * csio_mb_initialize - FW INITIALIZE command helper
+ * @hw: The HW structure
+ * @mbp: Mailbox structure
+ * @tmo: COmmand timeout
+ * @cbfn: Callback, if any.
+ *
+ */
+void
+csio_mb_initialize(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+		   void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_initialize_cmd *cmdp = (struct fw_initialize_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, tmo, hw, cbfn, 1);
+
+	cmdp->op_to_write = htonl(FW_CMD_OP(FW_INITIALIZE_CMD)	|
+				  FW_CMD_REQUEST | FW_CMD_WRITE);
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+}
+
+/*
+ * csio_mb_iq_alloc - Initializes the mailbox to allocate an
+ *				Ingress DMA queue in the firmware.
+ *
+ * @hw: The hw structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private object
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @iq_params: Ingress queue params needed for allocation.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+static void
+csio_mb_iq_alloc(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		 uint32_t mb_tmo, struct csio_iq_params *iq_params,
+		 void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD)		|
+				FW_CMD_REQUEST | FW_CMD_EXEC	|
+				FW_IQ_CMD_PFN(iq_params->pfn)	|
+				FW_IQ_CMD_VFN(iq_params->vfn));
+
+	cmdp->alloc_to_len16 = htonl(FW_IQ_CMD_ALLOC		|
+				FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	cmdp->type_to_iqandstindex = htonl(
+				FW_IQ_CMD_VIID(iq_params->viid)	|
+				FW_IQ_CMD_TYPE(iq_params->type)	|
+				FW_IQ_CMD_IQASYNCH(iq_params->iqasynch));
+
+	cmdp->fl0size = htons(iq_params->fl0size);
+	cmdp->fl0size = htons(iq_params->fl1size);
+
+} /* csio_mb_iq_alloc */
+
+/*
+ * csio_mb_iq_write - Initializes the mailbox for writing into an
+ *				Ingress DMA Queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private object
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @cascaded_req: TRUE - if this request is cascased with iq-alloc request.
+ * @iq_params: Ingress queue params needed for writing.
+ * @cbfn: The call-back function
+ *
+ * NOTE: We OR relevant bits with cmdp->XXX, instead of just equating,
+ * because this IQ write request can be cascaded with a previous
+ * IQ alloc request, and we dont want to over-write the bits set by
+ * that request. This logic will work even in a non-cascaded case, since the
+ * cmdp structure is zeroed out by CSIO_INIT_MBP.
+ */
+static void
+csio_mb_iq_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		 uint32_t mb_tmo, bool cascaded_req,
+		 struct csio_iq_params *iq_params,
+		 void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb);
+
+	uint32_t iq_start_stop = (iq_params->iq_start)	?
+					FW_IQ_CMD_IQSTART(1) :
+					FW_IQ_CMD_IQSTOP(1);
+
+	/*
+	 * If this IQ write is cascaded with IQ alloc request, do not
+	 * re-initialize with 0's.
+	 *
+	 */
+	if (!cascaded_req)
+		CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+
+	cmdp->op_to_vfn |= htonl(FW_CMD_OP(FW_IQ_CMD)		|
+				FW_CMD_REQUEST | FW_CMD_WRITE	|
+				FW_IQ_CMD_PFN(iq_params->pfn)	|
+				FW_IQ_CMD_VFN(iq_params->vfn));
+	cmdp->alloc_to_len16 |= htonl(iq_start_stop |
+				FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->iqid |= htons(iq_params->iqid);
+	cmdp->fl0id |= htons(iq_params->fl0id);
+	cmdp->fl1id |= htons(iq_params->fl1id);
+	cmdp->type_to_iqandstindex |= htonl(
+			FW_IQ_CMD_IQANDST(iq_params->iqandst)	|
+			FW_IQ_CMD_IQANUS(iq_params->iqanus)	|
+			FW_IQ_CMD_IQANUD(iq_params->iqanud)	|
+			FW_IQ_CMD_IQANDSTINDEX(iq_params->iqandstindex));
+	cmdp->iqdroprss_to_iqesize |= htons(
+			FW_IQ_CMD_IQPCIECH(iq_params->iqpciech)		|
+			FW_IQ_CMD_IQDCAEN(iq_params->iqdcaen)		|
+			FW_IQ_CMD_IQDCACPU(iq_params->iqdcacpu)		|
+			FW_IQ_CMD_IQINTCNTTHRESH(iq_params->iqintcntthresh) |
+			FW_IQ_CMD_IQCPRIO(iq_params->iqcprio)		|
+			FW_IQ_CMD_IQESIZE(iq_params->iqesize));
+
+	cmdp->iqsize |= htons(iq_params->iqsize);
+	cmdp->iqaddr |= cpu_to_be64(iq_params->iqaddr);
+
+	if (iq_params->type == 0) {
+		cmdp->iqns_to_fl0congen |= htonl(
+			FW_IQ_CMD_IQFLINTIQHSEN(iq_params->iqflintiqhsen)|
+			FW_IQ_CMD_IQFLINTCONGEN(iq_params->iqflintcongen));
+	}
+
+	if (iq_params->fl0size && iq_params->fl0addr &&
+	    (iq_params->fl0id != 0xFFFF)) {
+
+		cmdp->iqns_to_fl0congen |= htonl(
+			FW_IQ_CMD_FL0HOSTFCMODE(iq_params->fl0hostfcmode)|
+			FW_IQ_CMD_FL0CPRIO(iq_params->fl0cprio)		|
+			FW_IQ_CMD_FL0PADEN(iq_params->fl0paden)		|
+			FW_IQ_CMD_FL0PACKEN(iq_params->fl0packen));
+		cmdp->fl0dcaen_to_fl0cidxfthresh |= htons(
+			FW_IQ_CMD_FL0DCAEN(iq_params->fl0dcaen)		|
+			FW_IQ_CMD_FL0DCACPU(iq_params->fl0dcacpu)	|
+			FW_IQ_CMD_FL0FBMIN(iq_params->fl0fbmin)		|
+			FW_IQ_CMD_FL0FBMAX(iq_params->fl0fbmax)		|
+			FW_IQ_CMD_FL0CIDXFTHRESH(iq_params->fl0cidxfthresh));
+		cmdp->fl0size |= htons(iq_params->fl0size);
+		cmdp->fl0addr |= cpu_to_be64(iq_params->fl0addr);
+	}
+} /* csio_mb_iq_write */
+
+/*
+ * csio_mb_iq_alloc_write - Initializes the mailbox for allocating an
+ *				Ingress DMA Queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @iq_params: Ingress queue params needed for allocation & writing.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_mb_iq_alloc_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		       uint32_t mb_tmo, struct csio_iq_params *iq_params,
+		       void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	csio_mb_iq_alloc(hw, mbp, priv, mb_tmo, iq_params, cbfn);
+	csio_mb_iq_write(hw, mbp, priv, mb_tmo, true, iq_params, cbfn);
+} /* csio_mb_iq_alloc_write */
+
+/*
+ * csio_mb_iq_alloc_write_rsp - Process the allocation & writing
+ *				of ingress DMA queue mailbox's response.
+ *
+ * @hw: The HW structure.
+ * @mbp: Mailbox structure to initialize.
+ * @retval: Firmware return value.
+ * @iq_params: Ingress queue parameters, after allocation and write.
+ *
+ */
+void
+csio_mb_iq_alloc_write_rsp(struct csio_hw *hw, struct csio_mb *mbp,
+			   enum fw_retval *ret_val,
+			   struct csio_iq_params *iq_params)
+{
+	struct fw_iq_cmd *rsp = (struct fw_iq_cmd *)(mbp->mb);
+
+	*ret_val = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16));
+	if (*ret_val == FW_SUCCESS) {
+		iq_params->physiqid = ntohs(rsp->physiqid);
+		iq_params->iqid = ntohs(rsp->iqid);
+		iq_params->fl0id = ntohs(rsp->fl0id);
+		iq_params->fl1id = ntohs(rsp->fl1id);
+	} else {
+		iq_params->physiqid = iq_params->iqid =
+		iq_params->fl0id = iq_params->fl1id = 0;
+	}
+} /* csio_mb_iq_alloc_write_rsp */
+
+/*
+ * csio_mb_iq_free - Initializes the mailbox for freeing a
+ *				specified Ingress DMA Queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @iq_params: Parameters of ingress queue, that is to be freed.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_mb_iq_free(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		uint32_t mb_tmo, struct csio_iq_params *iq_params,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_iq_cmd *cmdp = (struct fw_iq_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD)		|
+				FW_CMD_REQUEST | FW_CMD_EXEC	|
+				FW_IQ_CMD_PFN(iq_params->pfn)	|
+				FW_IQ_CMD_VFN(iq_params->vfn));
+	cmdp->alloc_to_len16 = htonl(FW_IQ_CMD_FREE		|
+				FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(iq_params->type));
+
+	cmdp->iqid = htons(iq_params->iqid);
+	cmdp->fl0id = htons(iq_params->fl0id);
+	cmdp->fl1id = htons(iq_params->fl1id);
+
+} /* csio_mb_iq_free */
+
+/*
+ * csio_mb_eq_ofld_alloc - Initializes the mailbox for allocating
+ *				an offload-egress queue.
+ *
+ * @hw: The HW  structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+static void
+csio_mb_eq_ofld_alloc(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		uint32_t mb_tmo, struct csio_eq_params *eq_ofld_params,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD)		|
+				FW_CMD_REQUEST | FW_CMD_EXEC		|
+				FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) |
+				FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn));
+	cmdp->alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_ALLOC	|
+				FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+} /* csio_mb_eq_ofld_alloc */
+
+/*
+ * csio_mb_eq_ofld_write - Initializes the mailbox for writing
+ *				an alloacted offload-egress queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @cascaded_req: TRUE - if this request is cascased with Eq-alloc request.
+ * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @cbfn: The call-back function
+ *
+ *
+ * NOTE: We OR relevant bits with cmdp->XXX, instead of just equating,
+ * because this EQ write request can be cascaded with a previous
+ * EQ alloc request, and we dont want to over-write the bits set by
+ * that request. This logic will work even in a non-cascaded case, since the
+ * cmdp structure is zeroed out by CSIO_INIT_MBP.
+ */
+static void
+csio_mb_eq_ofld_write(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		      uint32_t mb_tmo, bool cascaded_req,
+		      struct csio_eq_params *eq_ofld_params,
+		      void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb);
+
+	uint32_t eq_start_stop = (eq_ofld_params->eqstart)	?
+				FW_EQ_OFLD_CMD_EQSTART	: FW_EQ_OFLD_CMD_EQSTOP;
+
+	/*
+	 * If this EQ write is cascaded with EQ alloc request, do not
+	 * re-initialize with 0's.
+	 *
+	 */
+	if (!cascaded_req)
+		CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+
+	cmdp->op_to_vfn |= htonl(FW_CMD_OP(FW_EQ_OFLD_CMD)	|
+				FW_CMD_REQUEST | FW_CMD_WRITE	|
+				FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) |
+				FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn));
+	cmdp->alloc_to_len16 |= htonl(eq_start_stop		|
+				      FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	cmdp->eqid_pkd |= htonl(FW_EQ_OFLD_CMD_EQID(eq_ofld_params->eqid));
+
+	cmdp->fetchszm_to_iqid |= htonl(
+		FW_EQ_OFLD_CMD_HOSTFCMODE(eq_ofld_params->hostfcmode)	|
+		FW_EQ_OFLD_CMD_CPRIO(eq_ofld_params->cprio)		|
+		FW_EQ_OFLD_CMD_PCIECHN(eq_ofld_params->pciechn)		|
+		FW_EQ_OFLD_CMD_IQID(eq_ofld_params->iqid));
+
+	cmdp->dcaen_to_eqsize |= htonl(
+		FW_EQ_OFLD_CMD_DCAEN(eq_ofld_params->dcaen)		|
+		FW_EQ_OFLD_CMD_DCACPU(eq_ofld_params->dcacpu)		|
+		FW_EQ_OFLD_CMD_FBMIN(eq_ofld_params->fbmin)		|
+		FW_EQ_OFLD_CMD_FBMAX(eq_ofld_params->fbmax)		|
+		FW_EQ_OFLD_CMD_CIDXFTHRESHO(eq_ofld_params->cidxfthresho) |
+		FW_EQ_OFLD_CMD_CIDXFTHRESH(eq_ofld_params->cidxfthresh) |
+		FW_EQ_OFLD_CMD_EQSIZE(eq_ofld_params->eqsize));
+
+	cmdp->eqaddr |= cpu_to_be64(eq_ofld_params->eqaddr);
+
+} /* csio_mb_eq_ofld_write */
+
+/*
+ * csio_mb_eq_ofld_alloc_write - Initializes the mailbox for allocation
+ *				writing into an Engress DMA Queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @eq_ofld_params: (Offload) Egress queue paramters.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_mb_eq_ofld_alloc_write(struct csio_hw *hw, struct csio_mb *mbp,
+			    void *priv, uint32_t mb_tmo,
+			    struct csio_eq_params *eq_ofld_params,
+			    void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	csio_mb_eq_ofld_alloc(hw, mbp, priv, mb_tmo, eq_ofld_params, cbfn);
+	csio_mb_eq_ofld_write(hw, mbp, priv, mb_tmo, true,
+			      eq_ofld_params, cbfn);
+} /* csio_mb_eq_ofld_alloc_write */
+
+/*
+ * csio_mb_eq_ofld_alloc_write_rsp - Process the allocation
+ *				& write egress DMA queue mailbox's response.
+ *
+ * @hw: The HW structure.
+ * @mbp: Mailbox structure to initialize.
+ * @retval: Firmware return value.
+ * @eq_ofld_params: (Offload) Egress queue paramters.
+ *
+ */
+void
+csio_mb_eq_ofld_alloc_write_rsp(struct csio_hw *hw,
+				struct csio_mb *mbp, enum fw_retval *ret_val,
+				struct csio_eq_params *eq_ofld_params)
+{
+	struct fw_eq_ofld_cmd *rsp = (struct fw_eq_ofld_cmd *)(mbp->mb);
+
+	*ret_val = FW_CMD_RETVAL_GET(ntohl(rsp->alloc_to_len16));
+
+	if (*ret_val == FW_SUCCESS) {
+		eq_ofld_params->eqid = FW_EQ_OFLD_CMD_EQID_GET(
+						ntohl(rsp->eqid_pkd));
+		eq_ofld_params->physeqid = FW_EQ_OFLD_CMD_PHYSEQID_GET(
+						ntohl(rsp->physeqid_pkd));
+	} else
+		eq_ofld_params->eqid = 0;
+
+} /* csio_mb_eq_ofld_alloc_write_rsp */
+
+/*
+ * csio_mb_eq_ofld_free - Initializes the mailbox for freeing a
+ *				specified Engress DMA Queue.
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @priv: Private data area.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @eq_ofld_params: (Offload) Egress queue paramters, that is to be freed.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_mb_eq_ofld_free(struct csio_hw *hw, struct csio_mb *mbp, void *priv,
+		     uint32_t mb_tmo, struct csio_eq_params *eq_ofld_params,
+		     void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_eq_ofld_cmd *cmdp = (struct fw_eq_ofld_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, priv, cbfn, 1);
+
+	cmdp->op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD)	|
+				FW_CMD_REQUEST | FW_CMD_EXEC	|
+				FW_EQ_OFLD_CMD_PFN(eq_ofld_params->pfn) |
+				FW_EQ_OFLD_CMD_VFN(eq_ofld_params->vfn));
+	cmdp->alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE |
+				FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID(eq_ofld_params->eqid));
+
+} /* csio_mb_eq_ofld_free */
+
+/*
+ * csio_write_fcoe_link_cond_init_mb - Initialize Mailbox to write FCoE link
+ *				 condition.
+ *
+ * @ln: The Lnode structure
+ * @mbp: Mailbox structure to initialize
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @cbfn: The call back function.
+ *
+ *
+ */
+void
+csio_write_fcoe_link_cond_init_mb(struct csio_lnode *ln, struct csio_mb *mbp,
+			uint32_t mb_tmo, uint8_t port_id, uint32_t sub_opcode,
+			uint8_t cos, bool link_status, uint32_t fcfi,
+			void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_link_cmd *cmdp =
+				(struct fw_fcoe_link_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1);
+
+	cmdp->op_to_portid = htonl((
+			FW_CMD_OP(FW_FCOE_LINK_CMD)		|
+			FW_CMD_REQUEST				|
+			FW_CMD_WRITE				|
+			FW_FCOE_LINK_CMD_PORTID(port_id)));
+	cmdp->sub_opcode_fcfi = htonl(
+			FW_FCOE_LINK_CMD_SUB_OPCODE(sub_opcode)	|
+			FW_FCOE_LINK_CMD_FCFI(fcfi));
+	cmdp->lstatus = link_status;
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+} /* csio_write_fcoe_link_cond_init_mb */
+
+/*
+ * csio_fcoe_read_res_info_init_mb - Initializes the mailbox for reading FCoE
+ *				resource information(FW_GET_RES_INFO_CMD).
+ *
+ * @hw: The HW structure
+ * @mbp: Mailbox structure to initialize
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_fcoe_read_res_info_init_mb(struct csio_hw *hw, struct csio_mb *mbp,
+			uint32_t mb_tmo,
+			void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_res_info_cmd *cmdp =
+			(struct fw_fcoe_res_info_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, hw, cbfn, 1);
+
+	cmdp->op_to_read = htonl((FW_CMD_OP(FW_FCOE_RES_INFO_CMD)	|
+				  FW_CMD_REQUEST			|
+				  FW_CMD_READ));
+
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+} /* csio_fcoe_read_res_info_init_mb */
+
+/*
+ * csio_fcoe_vnp_alloc_init_mb - Initializes the mailbox for allocating VNP
+ *				in the firmware (FW_FCOE_VNP_CMD).
+ *
+ * @ln: The Lnode structure.
+ * @mbp: Mailbox structure to initialize.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @fcfi: FCF Index.
+ * @vnpi: vnpi
+ * @iqid: iqid
+ * @vnport_wwnn: vnport WWNN
+ * @vnport_wwpn: vnport WWPN
+ * @cbfn: The call-back function.
+ *
+ *
+ */
+void
+csio_fcoe_vnp_alloc_init_mb(struct csio_lnode *ln, struct csio_mb *mbp,
+		uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi, uint16_t iqid,
+		uint8_t vnport_wwnn[8],	uint8_t vnport_wwpn[8],
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_vnp_cmd *cmdp =
+			(struct fw_fcoe_vnp_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1);
+
+	cmdp->op_to_fcfi = htonl((FW_CMD_OP(FW_FCOE_VNP_CMD)		|
+				  FW_CMD_REQUEST			|
+				  FW_CMD_EXEC				|
+				  FW_FCOE_VNP_CMD_FCFI(fcfi)));
+
+	cmdp->alloc_to_len16 = htonl(FW_FCOE_VNP_CMD_ALLOC		|
+				     FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+	cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi));
+
+	cmdp->iqid = htons(iqid);
+
+	if (!wwn_to_u64(vnport_wwnn) && !wwn_to_u64(vnport_wwpn))
+		cmdp->gen_wwn_to_vnpi |= htonl(FW_FCOE_VNP_CMD_GEN_WWN);
+
+	if (vnport_wwnn)
+		memcpy(cmdp->vnport_wwnn, vnport_wwnn, 8);
+	if (vnport_wwpn)
+		memcpy(cmdp->vnport_wwpn, vnport_wwpn, 8);
+
+} /* csio_fcoe_vnp_alloc_init_mb */
+
+/*
+ * csio_fcoe_vnp_read_init_mb - Prepares VNP read cmd.
+ * @ln: The Lnode structure.
+ * @mbp: Mailbox structure to initialize.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @fcfi: FCF Index.
+ * @vnpi: vnpi
+ * @cbfn: The call-back handler.
+ */
+void
+csio_fcoe_vnp_read_init_mb(struct csio_lnode *ln, struct csio_mb *mbp,
+		uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_vnp_cmd *cmdp =
+			(struct fw_fcoe_vnp_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1);
+	cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_VNP_CMD)	|
+				 FW_CMD_REQUEST			|
+				 FW_CMD_READ			|
+				 FW_FCOE_VNP_CMD_FCFI(fcfi));
+	cmdp->alloc_to_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi));
+}
+
+/*
+ * csio_fcoe_vnp_free_init_mb - Initializes the mailbox for freeing an
+ *			alloacted VNP in the firmware (FW_FCOE_VNP_CMD).
+ *
+ * @ln: The Lnode structure.
+ * @mbp: Mailbox structure to initialize.
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @fcfi: FCF flow id
+ * @vnpi: VNP flow id
+ * @cbfn: The call-back function.
+ * Return: None
+ */
+void
+csio_fcoe_vnp_free_init_mb(struct csio_lnode *ln, struct csio_mb *mbp,
+		uint32_t mb_tmo, uint32_t fcfi, uint32_t vnpi,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_vnp_cmd *cmdp =
+			(struct fw_fcoe_vnp_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1);
+
+	cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_VNP_CMD)	|
+				 FW_CMD_REQUEST			|
+				 FW_CMD_EXEC			|
+				 FW_FCOE_VNP_CMD_FCFI(fcfi));
+	cmdp->alloc_to_len16 = htonl(FW_FCOE_VNP_CMD_FREE	|
+				     FW_CMD_LEN16(sizeof(*cmdp) / 16));
+	cmdp->gen_wwn_to_vnpi = htonl(FW_FCOE_VNP_CMD_VNPI(vnpi));
+}
+
+/*
+ * csio_fcoe_read_fcf_init_mb - Initializes the mailbox to read the
+ *				FCF records.
+ *
+ * @ln: The Lnode structure
+ * @mbp: Mailbox structure to initialize
+ * @mb_tmo: Mailbox time-out period (in ms).
+ * @fcf_params: FC-Forwarder parameters.
+ * @cbfn: The call-back function
+ *
+ *
+ */
+void
+csio_fcoe_read_fcf_init_mb(struct csio_lnode *ln, struct csio_mb *mbp,
+		uint32_t mb_tmo, uint32_t portid, uint32_t fcfi,
+		void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct fw_fcoe_fcf_cmd *cmdp =
+			(struct fw_fcoe_fcf_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, ln, cbfn, 1);
+
+	cmdp->op_to_fcfi = htonl(FW_CMD_OP(FW_FCOE_FCF_CMD)	|
+				 FW_CMD_REQUEST			|
+				 FW_CMD_READ			|
+				 FW_FCOE_FCF_CMD_FCFI(fcfi));
+	cmdp->retval_len16 = htonl(FW_CMD_LEN16(sizeof(*cmdp) / 16));
+
+} /* csio_fcoe_read_fcf_init_mb */
+
+void
+csio_fcoe_read_portparams_init_mb(struct csio_hw *hw, struct csio_mb *mbp,
+				uint32_t mb_tmo,
+				struct fw_fcoe_port_cmd_params *portparams,
+				void (*cbfn)(struct csio_hw *,
+					     struct csio_mb *))
+{
+	struct fw_fcoe_stats_cmd *cmdp = (struct fw_fcoe_stats_cmd *)(mbp->mb);
+
+	CSIO_INIT_MBP(mbp, cmdp, mb_tmo, hw, cbfn, 1);
+	mbp->mb_size = 64;
+
+	cmdp->op_to_flowid = htonl(FW_CMD_OP(FW_FCOE_STATS_CMD)         |
+				   FW_CMD_REQUEST | FW_CMD_READ);
+	cmdp->free_to_len16 = htonl(FW_CMD_LEN16(CSIO_MAX_MB_SIZE/16));
+
+	cmdp->u.ctl.nstats_port = FW_FCOE_STATS_CMD_NSTATS(portparams->nstats) |
+				  FW_FCOE_STATS_CMD_PORT(portparams->portid);
+
+	cmdp->u.ctl.port_valid_ix = FW_FCOE_STATS_CMD_IX(portparams->idx)    |
+				    FW_FCOE_STATS_CMD_PORT_VALID;
+
+} /* csio_fcoe_read_portparams_init_mb */
+
+void
+csio_mb_process_portparams_rsp(struct csio_hw *hw,
+				struct csio_mb *mbp,
+				enum fw_retval *retval,
+				struct fw_fcoe_port_cmd_params *portparams,
+				struct fw_fcoe_port_stats *portstats)
+{
+	struct fw_fcoe_stats_cmd *rsp = (struct fw_fcoe_stats_cmd *)(mbp->mb);
+	struct fw_fcoe_port_stats stats;
+	uint8_t *src;
+	uint8_t *dst;
+
+	*retval = FW_CMD_RETVAL_GET(ntohl(rsp->free_to_len16));
+
+	memset(&stats, 0, sizeof(struct fw_fcoe_port_stats));
+
+	if (*retval == FW_SUCCESS) {
+		dst = (uint8_t *)(&stats) + ((portparams->idx - 1) * 8);
+		src = (uint8_t *)rsp + (CSIO_STATS_OFFSET * 8);
+		memcpy(dst, src, (portparams->nstats * 8));
+		if (portparams->idx == 1) {
+			/* Get the first 6 flits from the Mailbox */
+			portstats->tx_bcast_bytes = stats.tx_bcast_bytes;
+			portstats->tx_bcast_frames = stats.tx_bcast_frames;
+			portstats->tx_mcast_bytes = stats.tx_mcast_bytes;
+			portstats->tx_mcast_frames = stats.tx_mcast_frames;
+			portstats->tx_ucast_bytes = stats.tx_ucast_bytes;
+			portstats->tx_ucast_frames = stats.tx_ucast_frames;
+		}
+		if (portparams->idx == 7) {
+			/* Get the second 6 flits from the Mailbox */
+			portstats->tx_drop_frames = stats.tx_drop_frames;
+			portstats->tx_offload_bytes = stats.tx_offload_bytes;
+			portstats->tx_offload_frames = stats.tx_offload_frames;
+#if 0
+			portstats->rx_pf_bytes = stats.rx_pf_bytes;
+			portstats->rx_pf_frames	= stats.rx_pf_frames;
+#endif
+			portstats->rx_bcast_bytes = stats.rx_bcast_bytes;
+			portstats->rx_bcast_frames = stats.rx_bcast_frames;
+			portstats->rx_mcast_bytes = stats.rx_mcast_bytes;
+		}
+		if (portparams->idx == 13) {
+			/* Get the last 4 flits from the Mailbox */
+			portstats->rx_mcast_frames = stats.rx_mcast_frames;
+			portstats->rx_ucast_bytes = stats.rx_ucast_bytes;
+			portstats->rx_ucast_frames = stats.rx_ucast_frames;
+			portstats->rx_err_frames = stats.rx_err_frames;
+		}
+	}
+}
+
+/* Entry points/APIs for MB module					     */
+/*
+ * csio_mb_intr_enable - Enable Interrupts from mailboxes.
+ * @hw: The HW structure
+ *
+ * Enables CIM interrupt bit in appropriate INT_ENABLE registers.
+ */
+void
+csio_mb_intr_enable(struct csio_hw *hw)
+{
+	csio_wr_reg32(hw, MBMSGRDYINTEN(1), MYPF_REG(CIM_PF_HOST_INT_ENABLE));
+	csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_ENABLE));
+}
+
+/*
+ * csio_mb_intr_disable - Disable Interrupts from mailboxes.
+ * @hw: The HW structure
+ *
+ * Disable bit in HostInterruptEnable CIM register.
+ */
+void
+csio_mb_intr_disable(struct csio_hw *hw)
+{
+	csio_wr_reg32(hw, MBMSGRDYINTEN(0), MYPF_REG(CIM_PF_HOST_INT_ENABLE));
+	csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_ENABLE));
+}
+
+static void
+csio_mb_dump_fw_dbg(struct csio_hw *hw, __be64 *cmd)
+{
+	struct fw_debug_cmd *dbg = (struct fw_debug_cmd *)cmd;
+
+	if ((FW_DEBUG_CMD_TYPE_GET(ntohl(dbg->op_type))) == 1) {
+		csio_info(hw, "FW print message:\n");
+		csio_info(hw, "\tdebug->dprtstridx = %d\n",
+			    ntohs(dbg->u.prt.dprtstridx));
+		csio_info(hw, "\tdebug->dprtstrparam0 = 0x%x\n",
+			    ntohl(dbg->u.prt.dprtstrparam0));
+		csio_info(hw, "\tdebug->dprtstrparam1 = 0x%x\n",
+			    ntohl(dbg->u.prt.dprtstrparam1));
+		csio_info(hw, "\tdebug->dprtstrparam2 = 0x%x\n",
+			    ntohl(dbg->u.prt.dprtstrparam2));
+		csio_info(hw, "\tdebug->dprtstrparam3 = 0x%x\n",
+			    ntohl(dbg->u.prt.dprtstrparam3));
+	} else {
+		/* This is a FW assertion */
+		csio_fatal(hw, "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
+			    dbg->u.assert.filename_0_7,
+			    ntohl(dbg->u.assert.line),
+			    ntohl(dbg->u.assert.x),
+			    ntohl(dbg->u.assert.y));
+	}
+}
+
+static void
+csio_mb_debug_cmd_handler(struct csio_hw *hw)
+{
+	int i;
+	__be64 cmd[CSIO_MB_MAX_REGS];
+	uint32_t ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL);
+	uint32_t data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA);
+	int size = sizeof(struct fw_debug_cmd);
+
+	/* Copy mailbox data */
+	for (i = 0; i < size; i += 8)
+		cmd[i / 8] = cpu_to_be64(csio_rd_reg64(hw, data_reg + i));
+
+	csio_mb_dump_fw_dbg(hw, cmd);
+
+	/* Notify FW of mailbox by setting owner as UP */
+	csio_wr_reg32(hw, MBMSGVALID | MBINTREQ | MBOWNER(CSIO_MBOWNER_FW),
+		      ctl_reg);
+
+	csio_rd_reg32(hw, ctl_reg);
+	wmb();
+}
+
+/*
+ * csio_mb_issue - generic routine for issuing Mailbox commands.
+ * @hw: The HW structure
+ * @mbp: Mailbox command to issue
+ *
+ *  Caller should hold hw lock across this call.
+ */
+int
+csio_mb_issue(struct csio_hw *hw, struct csio_mb *mbp)
+{
+	uint32_t owner, ctl;
+	int i;
+	uint32_t ii;
+	__be64 *cmd = mbp->mb;
+	__be64 hdr;
+	struct csio_mbm	*mbm = &hw->mbm;
+	uint32_t ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL);
+	uint32_t data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA);
+	int size = mbp->mb_size;
+	int rv = -EINVAL;
+	struct fw_cmd_hdr *fw_hdr;
+
+	/* Determine mode */
+	if (mbp->mb_cbfn == NULL) {
+		/* Need to issue/get results in the same context */
+		if (mbp->tmo < CSIO_MB_POLL_FREQ) {
+			csio_err(hw, "Invalid tmo: 0x%x\n", mbp->tmo);
+			goto error_out;
+		}
+	} else if (!csio_is_host_intr_enabled(hw) ||
+		   !csio_is_hw_intr_enabled(hw)) {
+		csio_err(hw, "Cannot issue mailbox in interrupt mode 0x%x\n",
+			 *((uint8_t *)mbp->mb));
+			goto error_out;
+	}
+
+	if (mbm->mcurrent != NULL) {
+		/* Queue mbox cmd, if another mbox cmd is active */
+		if (mbp->mb_cbfn == NULL) {
+			rv = -EBUSY;
+			csio_dbg(hw, "Couldnt own Mailbox %x op:0x%x\n",
+				    hw->pfn, *((uint8_t *)mbp->mb));
+
+			goto error_out;
+		} else {
+			list_add_tail(&mbp->list, &mbm->req_q);
+			CSIO_INC_STATS(mbm, n_activeq);
+
+			return 0;
+		}
+	}
+
+	/* Now get ownership of mailbox */
+	owner = MBOWNER_GET(csio_rd_reg32(hw, ctl_reg));
+
+	if (!csio_mb_is_host_owner(owner)) {
+
+		for (i = 0; (owner == CSIO_MBOWNER_NONE) && (i < 3); i++)
+			owner = MBOWNER_GET(csio_rd_reg32(hw, ctl_reg));
+		/*
+		 * Mailbox unavailable. In immediate mode, fail the command.
+		 * In other modes, enqueue the request.
+		 */
+		if (!csio_mb_is_host_owner(owner)) {
+			if (mbp->mb_cbfn == NULL) {
+				rv = owner ? -EBUSY : -ETIMEDOUT;
+
+				csio_dbg(hw,
+					 "Couldnt own Mailbox %x op:0x%x "
+					 "owner:%x\n",
+					 hw->pfn, *((uint8_t *)mbp->mb), owner);
+				goto error_out;
+			} else {
+				if (mbm->mcurrent == NULL) {
+					csio_err(hw,
+						 "Couldnt own Mailbox %x "
+						 "op:0x%x owner:%x\n",
+						 hw->pfn, *((uint8_t *)mbp->mb),
+						 owner);
+					csio_err(hw,
+						 "No outstanding driver"
+						 " mailbox as well\n");
+					goto error_out;
+				}
+			}
+		}
+	}
+
+	/* Mailbox is available, copy mailbox data into it */
+	for (i = 0; i < size; i += 8) {
+		csio_wr_reg64(hw, be64_to_cpu(*cmd), data_reg + i);
+		cmd++;
+	}
+
+	CSIO_DUMP_MB(hw, hw->pfn, data_reg);
+
+	/* Start completion timers in non-immediate modes and notify FW */
+	if (mbp->mb_cbfn != NULL) {
+		mbm->mcurrent = mbp;
+		mod_timer(&mbm->timer, jiffies + msecs_to_jiffies(mbp->tmo));
+		csio_wr_reg32(hw, MBMSGVALID | MBINTREQ |
+			      MBOWNER(CSIO_MBOWNER_FW), ctl_reg);
+	} else
+		csio_wr_reg32(hw, MBMSGVALID | MBOWNER(CSIO_MBOWNER_FW),
+			      ctl_reg);
+
+	/* Flush posted writes */
+	csio_rd_reg32(hw, ctl_reg);
+	wmb();
+
+	CSIO_INC_STATS(mbm, n_req);
+
+	if (mbp->mb_cbfn)
+		return 0;
+
+	/* Poll for completion in immediate mode */
+	cmd = mbp->mb;
+
+	for (ii = 0; ii < mbp->tmo; ii += CSIO_MB_POLL_FREQ) {
+		mdelay(CSIO_MB_POLL_FREQ);
+
+		/* Check for response */
+		ctl = csio_rd_reg32(hw, ctl_reg);
+		if (csio_mb_is_host_owner(MBOWNER_GET(ctl))) {
+
+			if (!(ctl & MBMSGVALID)) {
+				csio_wr_reg32(hw, 0, ctl_reg);
+				continue;
+			}
+
+			CSIO_DUMP_MB(hw, hw->pfn, data_reg);
+
+			hdr = cpu_to_be64(csio_rd_reg64(hw, data_reg));
+			fw_hdr = (struct fw_cmd_hdr *)&hdr;
+
+			switch (FW_CMD_OP_GET(ntohl(fw_hdr->hi))) {
+			case FW_DEBUG_CMD:
+				csio_mb_debug_cmd_handler(hw);
+				continue;
+			}
+
+			/* Copy response */
+			for (i = 0; i < size; i += 8)
+				*cmd++ = cpu_to_be64(csio_rd_reg64
+							  (hw, data_reg + i));
+			csio_wr_reg32(hw, 0, ctl_reg);
+
+			if (csio_mb_fw_retval(mbp) != FW_SUCCESS)
+				CSIO_INC_STATS(mbm, n_err);
+
+			CSIO_INC_STATS(mbm, n_rsp);
+			return 0;
+		}
+	}
+
+	CSIO_INC_STATS(mbm, n_tmo);
+
+	csio_err(hw, "Mailbox %x op:0x%x timed out!\n",
+		 hw->pfn, *((uint8_t *)cmd));
+
+	return -ETIMEDOUT;
+
+error_out:
+	CSIO_INC_STATS(mbm, n_err);
+	return rv;
+}
+
+/*
+ * csio_mb_completions - Completion handler for Mailbox commands
+ * @hw: The HW structure
+ * @cbfn_q: Completion queue.
+ *
+ */
+void
+csio_mb_completions(struct csio_hw *hw, struct list_head *cbfn_q)
+{
+	struct csio_mb *mbp;
+	struct csio_mbm *mbm = &hw->mbm;
+	enum fw_retval rv;
+
+	while (!list_empty(cbfn_q)) {
+		mbp = list_first_entry(cbfn_q, struct csio_mb, list);
+		list_del_init(&mbp->list);
+
+		rv = csio_mb_fw_retval(mbp);
+		if ((rv != FW_SUCCESS) && (rv != FW_HOSTERROR))
+			CSIO_INC_STATS(mbm, n_err);
+		else if (rv != FW_HOSTERROR)
+			CSIO_INC_STATS(mbm, n_rsp);
+
+		if (mbp->mb_cbfn)
+			mbp->mb_cbfn(hw, mbp);
+	}
+}
+
+static void
+csio_mb_portmod_changed(struct csio_hw *hw, uint8_t port_id)
+{
+	static char *mod_str[] = {
+		NULL, "LR", "SR", "ER", "TWINAX", "active TWINAX", "LRM"
+	};
+
+	struct csio_pport *port = &hw->pport[port_id];
+
+	if (port->mod_type == FW_PORT_MOD_TYPE_NONE)
+		csio_info(hw, "Port:%d - port module unplugged\n", port_id);
+	else if (port->mod_type < ARRAY_SIZE(mod_str))
+		csio_info(hw, "Port:%d - %s port module inserted\n", port_id,
+			  mod_str[port->mod_type]);
+	else if (port->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
+		csio_info(hw,
+			  "Port:%d - unsupported optical port module "
+			  "inserted\n", port_id);
+	else if (port->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
+		csio_info(hw,
+			  "Port:%d - unknown port module inserted, forcing "
+			  "TWINAX\n", port_id);
+	else if (port->mod_type == FW_PORT_MOD_TYPE_ERROR)
+		csio_info(hw, "Port:%d - transceiver module error\n", port_id);
+	else
+		csio_info(hw, "Port:%d - unknown module type %d inserted\n",
+			  port_id, port->mod_type);
+}
+
+int
+csio_mb_fwevt_handler(struct csio_hw *hw, __be64 *cmd)
+{
+	uint8_t opcode = *(uint8_t *)cmd;
+	struct fw_port_cmd *pcmd;
+	uint8_t port_id;
+	uint32_t link_status;
+	uint16_t action;
+	uint8_t mod_type;
+
+	if (opcode == FW_PORT_CMD) {
+		pcmd = (struct fw_port_cmd *)cmd;
+		port_id = FW_PORT_CMD_PORTID_GET(
+				ntohl(pcmd->op_to_portid));
+		action = FW_PORT_CMD_ACTION_GET(
+				ntohl(pcmd->action_to_len16));
+		if (action != FW_PORT_ACTION_GET_PORT_INFO) {
+			csio_err(hw, "Unhandled FW_PORT_CMD action: %u\n",
+				action);
+			return -EINVAL;
+		}
+
+		link_status = ntohl(pcmd->u.info.lstatus_to_modtype);
+		mod_type = FW_PORT_CMD_MODTYPE_GET(link_status);
+
+		hw->pport[port_id].link_status =
+			FW_PORT_CMD_LSTATUS_GET(link_status);
+		hw->pport[port_id].link_speed =
+			FW_PORT_CMD_LSPEED_GET(link_status);
+
+		csio_info(hw, "Port:%x - LINK %s\n", port_id,
+			FW_PORT_CMD_LSTATUS_GET(link_status) ? "UP" : "DOWN");
+
+		if (mod_type != hw->pport[port_id].mod_type) {
+			hw->pport[port_id].mod_type = mod_type;
+			csio_mb_portmod_changed(hw, port_id);
+		}
+	} else if (opcode == FW_DEBUG_CMD) {
+		csio_mb_dump_fw_dbg(hw, cmd);
+	} else {
+		csio_dbg(hw, "Gen MB can't handle op:0x%x on evtq.\n", opcode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * csio_mb_isr_handler - Handle mailboxes related interrupts.
+ * @hw: The HW structure
+ *
+ * Called from the ISR to handle Mailbox related interrupts.
+ * HW Lock should be held across this call.
+ */
+int
+csio_mb_isr_handler(struct csio_hw *hw)
+{
+	struct csio_mbm		*mbm = &hw->mbm;
+	struct csio_mb		*mbp =  mbm->mcurrent;
+	__be64			*cmd;
+	uint32_t		ctl, cim_cause, pl_cause;
+	int			i;
+	uint32_t		ctl_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_CTRL);
+	uint32_t		data_reg = PF_REG(hw->pfn, CIM_PF_MAILBOX_DATA);
+	int			size;
+	__be64			hdr;
+	struct fw_cmd_hdr	*fw_hdr;
+
+	pl_cause = csio_rd_reg32(hw, MYPF_REG(PL_PF_INT_CAUSE));
+	cim_cause = csio_rd_reg32(hw, MYPF_REG(CIM_PF_HOST_INT_CAUSE));
+
+	if (!(pl_cause & PFCIM) || !(cim_cause & MBMSGRDYINT)) {
+		CSIO_INC_STATS(hw, n_mbint_unexp);
+		return -EINVAL;
+	}
+
+	/*
+	 * The cause registers below HAVE to be cleared in the SAME
+	 * order as below: The low level cause register followed by
+	 * the upper level cause register. In other words, CIM-cause
+	 * first followed by PL-Cause next.
+	 */
+	csio_wr_reg32(hw, MBMSGRDYINT, MYPF_REG(CIM_PF_HOST_INT_CAUSE));
+	csio_wr_reg32(hw, PFCIM, MYPF_REG(PL_PF_INT_CAUSE));
+
+	ctl = csio_rd_reg32(hw, ctl_reg);
+
+	if (csio_mb_is_host_owner(MBOWNER_GET(ctl))) {
+
+		CSIO_DUMP_MB(hw, hw->pfn, data_reg);
+
+		if (!(ctl & MBMSGVALID)) {
+			csio_warn(hw,
+				  "Stray mailbox interrupt recvd,"
+				  " mailbox data not valid\n");
+			csio_wr_reg32(hw, 0, ctl_reg);
+			/* Flush */
+			csio_rd_reg32(hw, ctl_reg);
+			return -EINVAL;
+		}
+
+		hdr = cpu_to_be64(csio_rd_reg64(hw, data_reg));
+		fw_hdr = (struct fw_cmd_hdr *)&hdr;
+
+		switch (FW_CMD_OP_GET(ntohl(fw_hdr->hi))) {
+		case FW_DEBUG_CMD:
+			csio_mb_debug_cmd_handler(hw);
+			return -EINVAL;
+#if 0
+		case FW_ERROR_CMD:
+		case FW_INITIALIZE_CMD: /* When we are not master */
+#endif
+		}
+
+		CSIO_ASSERT(mbp != NULL);
+
+		cmd = mbp->mb;
+		size = mbp->mb_size;
+		/* Get response */
+		for (i = 0; i < size; i += 8)
+			*cmd++ = cpu_to_be64(csio_rd_reg64
+						  (hw, data_reg + i));
+
+		csio_wr_reg32(hw, 0, ctl_reg);
+		/* Flush */
+		csio_rd_reg32(hw, ctl_reg);
+
+		mbm->mcurrent = NULL;
+
+		/* Add completion to tail of cbfn queue */
+		list_add_tail(&mbp->list, &mbm->cbfn_q);
+		CSIO_INC_STATS(mbm, n_cbfnq);
+
+		/*
+		 * Enqueue event to EventQ. Events processing happens
+		 * in Event worker thread context
+		 */
+		if (csio_enqueue_evt(hw, CSIO_EVT_MBX, mbp, sizeof(mbp)))
+			CSIO_INC_STATS(hw, n_evt_drop);
+
+		return 0;
+
+	} else {
+		/*
+		 * We can get here if mailbox MSIX vector is shared,
+		 * or in INTx case. Or a stray interrupt.
+		 */
+		csio_dbg(hw, "Host not owner, no mailbox interrupt\n");
+		CSIO_INC_STATS(hw, n_int_stray);
+		return -EINVAL;
+	}
+}
+
+/*
+ * csio_mb_tmo_handler - Timeout handler
+ * @hw: The HW structure
+ *
+ */
+struct csio_mb *
+csio_mb_tmo_handler(struct csio_hw *hw)
+{
+	struct csio_mbm *mbm = &hw->mbm;
+	struct csio_mb *mbp =  mbm->mcurrent;
+	struct fw_cmd_hdr *fw_hdr;
+
+	/*
+	 * Could be a race b/w the completion handler and the timer
+	 * and the completion handler won that race.
+	 */
+	if (mbp == NULL) {
+		CSIO_DB_ASSERT(0);
+		return NULL;
+	}
+
+	fw_hdr = (struct fw_cmd_hdr *)(mbp->mb);
+
+	csio_dbg(hw, "Mailbox num:%x op:0x%x timed out\n", hw->pfn,
+		    FW_CMD_OP_GET(ntohl(fw_hdr->hi)));
+
+	mbm->mcurrent = NULL;
+	CSIO_INC_STATS(mbm, n_tmo);
+	fw_hdr->lo = htonl(FW_CMD_RETVAL(FW_ETIMEDOUT));
+
+	return mbp;
+}
+
+/*
+ * csio_mb_cancel_all - Cancel all waiting commands.
+ * @hw: The HW structure
+ * @cbfn_q: The callback queue.
+ *
+ * Caller should hold hw lock across this call.
+ */
+void
+csio_mb_cancel_all(struct csio_hw *hw, struct list_head *cbfn_q)
+{
+	struct csio_mb *mbp;
+	struct csio_mbm *mbm = &hw->mbm;
+	struct fw_cmd_hdr *hdr;
+	struct list_head *tmp;
+
+	if (mbm->mcurrent) {
+		mbp = mbm->mcurrent;
+
+		/* Stop mailbox completion timer */
+		del_timer_sync(&mbm->timer);
+
+		/* Add completion to tail of cbfn queue */
+		list_add_tail(&mbp->list, cbfn_q);
+		mbm->mcurrent = NULL;
+	}
+
+	if (!list_empty(&mbm->req_q)) {
+		list_splice_tail_init(&mbm->req_q, cbfn_q);
+		mbm->stats.n_activeq = 0;
+	}
+
+	if (!list_empty(&mbm->cbfn_q)) {
+		list_splice_tail_init(&mbm->cbfn_q, cbfn_q);
+		mbm->stats.n_cbfnq = 0;
+	}
+
+	if (list_empty(cbfn_q))
+		return;
+
+	list_for_each(tmp, cbfn_q) {
+		mbp = (struct csio_mb *)tmp;
+		hdr = (struct fw_cmd_hdr *)(mbp->mb);
+
+		csio_dbg(hw, "Cancelling pending mailbox num %x op:%x\n",
+			    hw->pfn, FW_CMD_OP_GET(ntohl(hdr->hi)));
+
+		CSIO_INC_STATS(mbm, n_cancel);
+		hdr->lo = htonl(FW_CMD_RETVAL(FW_HOSTERROR));
+	}
+}
+
+/*
+ * csio_mbm_init - Initialize Mailbox module
+ * @mbm: Mailbox module
+ * @hw: The HW structure
+ * @timer: Timing function for interrupting mailboxes
+ *
+ * Initialize timer and the request/response queues.
+ */
+int
+csio_mbm_init(struct csio_mbm *mbm, struct csio_hw *hw,
+	      void (*timer_fn)(uintptr_t))
+{
+	struct timer_list *timer = &mbm->timer;
+
+	init_timer(timer);
+	timer->function = timer_fn;
+	timer->data = (unsigned long)hw;
+
+	INIT_LIST_HEAD(&mbm->req_q);
+	INIT_LIST_HEAD(&mbm->cbfn_q);
+	csio_set_mb_intr_idx(mbm, -1);
+
+	return 0;
+}
+
+/*
+ * csio_mbm_exit - Uninitialize mailbox module
+ * @mbm: Mailbox module
+ *
+ * Stop timer.
+ */
+void
+csio_mbm_exit(struct csio_mbm *mbm)
+{
+	del_timer_sync(&mbm->timer);
+
+	CSIO_DB_ASSERT(mbm->mcurrent == NULL);
+	CSIO_DB_ASSERT(list_empty(&mbm->req_q));
+	CSIO_DB_ASSERT(list_empty(&mbm->cbfn_q));
+}
diff --git a/drivers/scsi/csiostor/csio_mb.h b/drivers/scsi/csiostor/csio_mb.h
new file mode 100644
index 0000000..1788ea5
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_mb.h
@@ -0,0 +1,278 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_MB_H__
+#define __CSIO_MB_H__
+
+#include <linux/timer.h>
+#include <linux/completion.h>
+
+#include "t4fw_api.h"
+#include "t4fw_api_stor.h"
+#include "csio_defs.h"
+
+#define CSIO_STATS_OFFSET (2)
+#define CSIO_NUM_STATS_PER_MB (6)
+
+struct fw_fcoe_port_cmd_params {
+	uint8_t		portid;
+	uint8_t		idx;
+	uint8_t		nstats;
+};
+
+#define CSIO_DUMP_MB(__hw, __num, __mb)					\
+	csio_dbg(__hw, "\t%llx %llx %llx %llx %llx %llx %llx %llx\n",	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb),		\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 8),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 16),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 24),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 32),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 40),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 48),	\
+		(unsigned long long)csio_rd_reg64(__hw, __mb + 56))
+
+#define CSIO_MB_MAX_REGS	8
+#define CSIO_MAX_MB_SIZE	64
+#define CSIO_MB_POLL_FREQ	5		/*  5 ms */
+#define CSIO_MB_DEFAULT_TMO	FW_CMD_MAX_TIMEOUT
+
+/* Device master in HELLO command */
+enum csio_dev_master { CSIO_MASTER_CANT, CSIO_MASTER_MAY, CSIO_MASTER_MUST };
+
+enum csio_mb_owner { CSIO_MBOWNER_NONE, CSIO_MBOWNER_FW, CSIO_MBOWNER_PL };
+
+enum csio_dev_state {
+	CSIO_DEV_STATE_UNINIT,
+	CSIO_DEV_STATE_INIT,
+	CSIO_DEV_STATE_ERR
+};
+
+#define FW_PARAM_DEV(param) \
+	(FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
+	 FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
+
+#define FW_PARAM_PFVF(param) \
+	(FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
+	 FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)|  \
+	 FW_PARAMS_PARAM_Y(0) | \
+	 FW_PARAMS_PARAM_Z(0))
+
+enum {
+	PAUSE_RX      = 1 << 0,
+	PAUSE_TX      = 1 << 1,
+	PAUSE_AUTONEG = 1 << 2
+};
+
+#define CSIO_INIT_MBP(__mbp, __cp,  __tmo, __priv, __fn, __clear)	\
+do {									\
+	if (__clear)							\
+		memset((__cp), 0,					\
+			    CSIO_MB_MAX_REGS * sizeof(__be64));		\
+	INIT_LIST_HEAD(&(__mbp)->list);					\
+	(__mbp)->tmo		= (__tmo);				\
+	(__mbp)->priv		= (void *)(__priv);			\
+	(__mbp)->mb_cbfn	= (__fn);				\
+	(__mbp)->mb_size	= sizeof(*(__cp));			\
+} while (0)
+
+struct csio_mbm_stats {
+	uint32_t	n_req;		/* number of mbox req */
+	uint32_t	n_rsp;		/* number of mbox rsp */
+	uint32_t	n_activeq;	/* number of mbox req active Q */
+	uint32_t	n_cbfnq;	/* number of mbox req cbfn Q */
+	uint32_t	n_tmo;		/* number of mbox timeout */
+	uint32_t	n_cancel;	/* number of mbox cancel */
+	uint32_t	n_err;		/* number of mbox error */
+};
+
+/* Driver version of Mailbox */
+struct csio_mb {
+	struct list_head	list;			/* for req/resp */
+							/* queue in driver */
+	__be64			mb[CSIO_MB_MAX_REGS];	/* MB in HW format */
+	int			mb_size;		/* Size of this
+							 * mailbox.
+							 */
+	uint32_t		tmo;			/* Timeout */
+	struct completion	cmplobj;		/* MB Completion
+							 * object
+							 */
+	void			(*mb_cbfn) (struct csio_hw *, struct csio_mb *);
+							/* Callback fn */
+	void			*priv;			/* Owner private ptr */
+};
+
+struct csio_mbm {
+	uint32_t		a_mbox;			/* Async mbox num */
+	uint32_t		intr_idx;		/* Interrupt index */
+	struct timer_list	timer;			/* Mbox timer */
+	struct list_head	req_q;			/* Mbox request queue */
+	struct list_head	cbfn_q;			/* Mbox completion q */
+	struct csio_mb		*mcurrent;		/* Current mailbox */
+	uint32_t		req_q_cnt;		/* Outstanding mbox
+							 * cmds
+							 */
+	struct csio_mbm_stats	stats;			/* Statistics */
+};
+
+#define csio_set_mb_intr_idx(_m, _i)	((_m)->intr_idx = (_i))
+#define csio_get_mb_intr_idx(_m)	((_m)->intr_idx)
+
+struct csio_iq_params;
+struct csio_eq_params;
+
+enum fw_retval csio_mb_fw_retval(struct csio_mb *);
+
+/* MB helpers */
+void csio_mb_hello(struct csio_hw *, struct csio_mb *, uint32_t,
+		   uint32_t, uint32_t, enum csio_dev_master,
+		   void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_process_hello_rsp(struct csio_hw *, struct csio_mb *,
+			       enum fw_retval *, enum csio_dev_state *,
+			       uint8_t *);
+
+void csio_mb_bye(struct csio_hw *, struct csio_mb *, uint32_t,
+		 void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_reset(struct csio_hw *, struct csio_mb *, uint32_t, int, int,
+		   void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_params(struct csio_hw *, struct csio_mb *, uint32_t, unsigned int,
+		    unsigned int, unsigned int, const u32 *, u32 *, bool,
+		    void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_process_read_params_rsp(struct csio_hw *, struct csio_mb *,
+				enum fw_retval *, unsigned int , u32 *);
+
+void csio_mb_ldst(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
+		  int reg);
+
+void csio_mb_caps_config(struct csio_hw *, struct csio_mb *, uint32_t,
+			    bool, bool, bool, bool,
+			    void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_rss_glb_config(struct csio_hw *, struct csio_mb *,
+			 uint32_t, uint8_t, unsigned int,
+			 void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_pfvf(struct csio_hw *, struct csio_mb *, uint32_t,
+		  unsigned int, unsigned int, unsigned int,
+		  unsigned int, unsigned int, unsigned int,
+		  unsigned int, unsigned int, unsigned int,
+		  unsigned int, unsigned int, unsigned int,
+		  unsigned int, void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_mb_port(struct csio_hw *, struct csio_mb *, uint32_t,
+		  uint8_t, bool, uint32_t, uint16_t,
+		  void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_mb_process_read_port_rsp(struct csio_hw *, struct csio_mb *,
+				   enum fw_retval *, uint16_t *);
+
+void csio_mb_initialize(struct csio_hw *, struct csio_mb *, uint32_t,
+			void (*)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_iq_alloc_write(struct csio_hw *, struct csio_mb *, void *,
+			uint32_t, struct csio_iq_params *,
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_mb_iq_alloc_write_rsp(struct csio_hw *, struct csio_mb *,
+				enum fw_retval *, struct csio_iq_params *);
+
+void csio_mb_iq_free(struct csio_hw *, struct csio_mb *, void *,
+		     uint32_t, struct csio_iq_params *,
+		     void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_mb_eq_ofld_alloc_write(struct csio_hw *, struct csio_mb *, void *,
+				 uint32_t, struct csio_eq_params *,
+				 void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_mb_eq_ofld_alloc_write_rsp(struct csio_hw *, struct csio_mb *,
+				     enum fw_retval *, struct csio_eq_params *);
+
+void csio_mb_eq_ofld_free(struct csio_hw *, struct csio_mb *, void *,
+			  uint32_t , struct csio_eq_params *,
+			  void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_read_res_info_init_mb(struct csio_hw *, struct csio_mb *,
+			uint32_t,
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_write_fcoe_link_cond_init_mb(struct csio_lnode *, struct csio_mb *,
+			uint32_t, uint8_t, uint32_t, uint8_t, bool, uint32_t,
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_vnp_alloc_init_mb(struct csio_lnode *, struct csio_mb *,
+			uint32_t, uint32_t , uint32_t , uint16_t,
+			uint8_t [8], uint8_t [8],
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_vnp_read_init_mb(struct csio_lnode *, struct csio_mb *,
+			uint32_t, uint32_t , uint32_t ,
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_vnp_free_init_mb(struct csio_lnode *, struct csio_mb *,
+			uint32_t , uint32_t, uint32_t ,
+			void (*) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_read_fcf_init_mb(struct csio_lnode *, struct csio_mb *,
+			uint32_t, uint32_t, uint32_t,
+			void (*cbfn) (struct csio_hw *, struct csio_mb *));
+
+void csio_fcoe_read_portparams_init_mb(struct csio_hw *hw,
+			struct csio_mb *mbp, uint32_t mb_tmo,
+			struct fw_fcoe_port_cmd_params *portparams,
+			void (*cbfn)(struct csio_hw *, struct csio_mb *));
+
+void csio_mb_process_portparams_rsp(struct csio_hw *hw, struct csio_mb *mbp,
+				enum fw_retval *retval,
+				struct fw_fcoe_port_cmd_params *portparams,
+				struct fw_fcoe_port_stats *portstats);
+
+/* MB module functions */
+int csio_mbm_init(struct csio_mbm *, struct csio_hw *,
+			    void (*)(uintptr_t));
+void csio_mbm_exit(struct csio_mbm *);
+void csio_mb_intr_enable(struct csio_hw *);
+void csio_mb_intr_disable(struct csio_hw *);
+
+int csio_mb_issue(struct csio_hw *, struct csio_mb *);
+void csio_mb_completions(struct csio_hw *, struct list_head *);
+int csio_mb_fwevt_handler(struct csio_hw *, __be64 *);
+int csio_mb_isr_handler(struct csio_hw *);
+struct csio_mb *csio_mb_tmo_handler(struct csio_hw *);
+void csio_mb_cancel_all(struct csio_hw *, struct list_head *);
+
+#endif /* ifndef __CSIO_MB_H__ */
diff --git a/drivers/scsi/csiostor/csio_rnode.c b/drivers/scsi/csiostor/csio_rnode.c
new file mode 100644
index 0000000..51c6a38
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_rnode.c
@@ -0,0 +1,913 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/string.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fs.h>
+
+#include "csio_hw.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+
+static int csio_rnode_init(struct csio_rnode *, struct csio_lnode *);
+static void csio_rnode_exit(struct csio_rnode *);
+
+/* Static machine forward declarations */
+static void csio_rns_uninit(struct csio_rnode *, enum csio_rn_ev);
+static void csio_rns_ready(struct csio_rnode *, enum csio_rn_ev);
+static void csio_rns_offline(struct csio_rnode *, enum csio_rn_ev);
+static void csio_rns_disappeared(struct csio_rnode *, enum csio_rn_ev);
+
+/* RNF event mapping */
+static enum csio_rn_ev fwevt_to_rnevt[] = {
+	CSIO_RNFE_NONE,		/* None */
+	CSIO_RNFE_LOGGED_IN,	/* PLOGI_ACC_RCVD  */
+	CSIO_RNFE_NONE,		/* PLOGI_RJT_RCVD  */
+	CSIO_RNFE_PLOGI_RECV,	/* PLOGI_RCVD	   */
+	CSIO_RNFE_LOGO_RECV,	/* PLOGO_RCVD	   */
+	CSIO_RNFE_PRLI_DONE,	/* PRLI_ACC_RCVD   */
+	CSIO_RNFE_NONE,		/* PRLI_RJT_RCVD   */
+	CSIO_RNFE_PRLI_RECV,	/* PRLI_RCVD	   */
+	CSIO_RNFE_PRLO_RECV,	/* PRLO_RCVD	   */
+	CSIO_RNFE_NONE,		/* NPORT_ID_CHGD   */
+	CSIO_RNFE_LOGO_RECV,	/* FLOGO_RCVD	   */
+	CSIO_RNFE_NONE,		/* CLR_VIRT_LNK_RCVD */
+	CSIO_RNFE_LOGGED_IN,	/* FLOGI_ACC_RCVD   */
+	CSIO_RNFE_NONE,		/* FLOGI_RJT_RCVD   */
+	CSIO_RNFE_LOGGED_IN,	/* FDISC_ACC_RCVD   */
+	CSIO_RNFE_NONE,		/* FDISC_RJT_RCVD   */
+	CSIO_RNFE_NONE,		/* FLOGI_TMO_MAX_RETRY */
+	CSIO_RNFE_NONE,		/* IMPL_LOGO_ADISC_ACC */
+	CSIO_RNFE_NONE,		/* IMPL_LOGO_ADISC_RJT */
+	CSIO_RNFE_NONE,		/* IMPL_LOGO_ADISC_CNFLT */
+	CSIO_RNFE_NONE,		/* PRLI_TMO		*/
+	CSIO_RNFE_NONE,		/* ADISC_TMO		*/
+	CSIO_RNFE_NAME_MISSING,	/* RSCN_DEV_LOST  */
+	CSIO_RNFE_NONE,		/* SCR_ACC_RCVD	*/
+	CSIO_RNFE_NONE,		/* ADISC_RJT_RCVD */
+	CSIO_RNFE_NONE,		/* LOGO_SNT */
+	CSIO_RNFE_LOGO_RECV,	/* PROTO_ERR_IMPL_LOGO */
+};
+
+#define CSIO_FWE_TO_RNFE(_evt)	((_evt > PROTO_ERR_IMPL_LOGO) ?		\
+						CSIO_RNFE_NONE :	\
+						fwevt_to_rnevt[_evt])
+int
+csio_is_rnode_ready(struct csio_rnode *rn)
+{
+	return csio_match_state(rn, csio_rns_ready);
+}
+
+static int
+csio_is_rnode_uninit(struct csio_rnode *rn)
+{
+	return csio_match_state(rn, csio_rns_uninit);
+}
+
+static int
+csio_is_rnode_wka(uint8_t rport_type)
+{
+	if ((rport_type == FLOGI_VFPORT) ||
+	    (rport_type == FDISC_VFPORT) ||
+	    (rport_type == NS_VNPORT) ||
+	    (rport_type == FDMI_VNPORT))
+		return 1;
+
+	return 0;
+}
+
+/*
+ * csio_rn_lookup - Finds the rnode with the given flowid
+ * @ln - lnode
+ * @flowid - flowid.
+ *
+ * Does the rnode lookup on the given lnode and flowid.If no matching entry
+ * found, NULL is returned.
+ */
+static struct csio_rnode *
+csio_rn_lookup(struct csio_lnode *ln, uint32_t flowid)
+{
+	struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead;
+	struct list_head *tmp;
+	struct csio_rnode *rn;
+
+	list_for_each(tmp, &rnhead->sm.sm_list) {
+		rn = (struct csio_rnode *) tmp;
+		if (rn->flowid == flowid)
+			return rn;
+	}
+
+	return NULL;
+}
+
+/*
+ * csio_rn_lookup_wwpn - Finds the rnode with the given wwpn
+ * @ln: lnode
+ * @wwpn: wwpn
+ *
+ * Does the rnode lookup on the given lnode and wwpn. If no matching entry
+ * found, NULL is returned.
+ */
+static struct csio_rnode *
+csio_rn_lookup_wwpn(struct csio_lnode *ln, uint8_t *wwpn)
+{
+	struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead;
+	struct list_head *tmp;
+	struct csio_rnode *rn;
+
+	list_for_each(tmp, &rnhead->sm.sm_list) {
+		rn = (struct csio_rnode *) tmp;
+		if (!memcmp(csio_rn_wwpn(rn), wwpn, 8))
+			return rn;
+	}
+
+	return NULL;
+}
+
+/**
+ * csio_rnode_lookup_portid - Finds the rnode with the given portid
+ * @ln:		lnode
+ * @portid:	port id
+ *
+ * Lookup the rnode list for a given portid. If no matching entry
+ * found, NULL is returned.
+ */
+struct csio_rnode *
+csio_rnode_lookup_portid(struct csio_lnode *ln, uint32_t portid)
+{
+	struct csio_rnode *rnhead = (struct csio_rnode *) &ln->rnhead;
+	struct list_head *tmp;
+	struct csio_rnode *rn;
+
+	list_for_each(tmp, &rnhead->sm.sm_list) {
+		rn = (struct csio_rnode *) tmp;
+		if (rn->nport_id == portid)
+			return rn;
+	}
+
+	return NULL;
+}
+
+static int
+csio_rn_dup_flowid(struct csio_lnode *ln, uint32_t rdev_flowid,
+		    uint32_t *vnp_flowid)
+{
+	struct csio_rnode *rnhead;
+	struct list_head *tmp, *tmp1;
+	struct csio_rnode *rn;
+	struct csio_lnode *ln_tmp;
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	list_for_each(tmp1, &hw->sln_head) {
+		ln_tmp = (struct csio_lnode *) tmp1;
+		if (ln_tmp == ln)
+			continue;
+
+		rnhead = (struct csio_rnode *)&ln_tmp->rnhead;
+		list_for_each(tmp, &rnhead->sm.sm_list) {
+
+			rn = (struct csio_rnode *) tmp;
+			if (csio_is_rnode_ready(rn)) {
+				if (rn->flowid == rdev_flowid) {
+					*vnp_flowid = csio_ln_flowid(ln_tmp);
+					return 1;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct csio_rnode *
+csio_alloc_rnode(struct csio_lnode *ln)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	struct csio_rnode *rn = mempool_alloc(hw->rnode_mempool, GFP_ATOMIC);
+	if (!rn)
+		goto err;
+
+	memset(rn, 0, sizeof(struct csio_rnode));
+	if (csio_rnode_init(rn, ln))
+		goto err_free;
+
+	CSIO_INC_STATS(ln, n_rnode_alloc);
+
+	return rn;
+
+err_free:
+	mempool_free(rn, hw->rnode_mempool);
+err:
+	CSIO_INC_STATS(ln, n_rnode_nomem);
+	return NULL;
+}
+
+static void
+csio_free_rnode(struct csio_rnode *rn)
+{
+	struct csio_hw *hw = csio_lnode_to_hw(csio_rnode_to_lnode(rn));
+
+	csio_rnode_exit(rn);
+	CSIO_INC_STATS(rn->lnp, n_rnode_free);
+	mempool_free(rn, hw->rnode_mempool);
+}
+
+/*
+ * csio_get_rnode - Gets rnode with the given flowid
+ * @ln - lnode
+ * @flowid - flow id.
+ *
+ * Does the rnode lookup on the given lnode and flowid. If no matching
+ * rnode found, then new rnode with given npid is allocated and returned.
+ */
+static struct csio_rnode *
+csio_get_rnode(struct csio_lnode *ln, uint32_t flowid)
+{
+	struct csio_rnode *rn;
+
+	rn = csio_rn_lookup(ln, flowid);
+	if (!rn) {
+		rn = csio_alloc_rnode(ln);
+		if (!rn)
+			return NULL;
+
+		rn->flowid = flowid;
+	}
+
+	return rn;
+}
+
+/*
+ * csio_put_rnode - Frees the given rnode
+ * @ln - lnode
+ * @flowid - flow id.
+ *
+ * Does the rnode lookup on the given lnode and flowid. If no matching
+ * rnode found, then new rnode with given npid is allocated and returned.
+ */
+void
+csio_put_rnode(struct csio_lnode *ln, struct csio_rnode *rn)
+{
+	CSIO_DB_ASSERT(csio_is_rnode_uninit(rn) != 0);
+	csio_free_rnode(rn);
+}
+
+/*
+ * csio_confirm_rnode - confirms rnode based on wwpn.
+ * @ln: lnode
+ * @rdev_flowid: remote device flowid
+ * @rdevp: remote device params
+ * This routines searches other rnode in list having same wwpn of new rnode.
+ * If there is a match, then matched rnode is returned and otherwise new rnode
+ * is returned.
+ * returns rnode.
+ */
+struct csio_rnode *
+csio_confirm_rnode(struct csio_lnode *ln, uint32_t rdev_flowid,
+		   struct fcoe_rdev_entry *rdevp)
+{
+	uint8_t rport_type;
+	struct csio_rnode *rn, *match_rn;
+	uint32_t vnp_flowid;
+	__be32 *port_id;
+
+	port_id = (__be32 *)&rdevp->r_id[0];
+	rport_type =
+		FW_RDEV_WR_RPORT_TYPE_GET(rdevp->rd_xfer_rdy_to_rport_type);
+
+	/* Drop rdev event for cntrl port */
+	if (rport_type == FAB_CTLR_VNPORT) {
+		csio_ln_dbg(ln,
+			    "Unhandled rport_type:%d recv in rdev evt "
+			    "ssni:x%x\n", rport_type, rdev_flowid);
+		return NULL;
+	}
+
+	/* Lookup on flowid */
+	rn = csio_rn_lookup(ln, rdev_flowid);
+	if (!rn) {
+
+		/* Drop events with duplicate flowid */
+		if (csio_rn_dup_flowid(ln, rdev_flowid, &vnp_flowid)) {
+			csio_ln_warn(ln,
+				     "ssni:%x already active on vnpi:%x",
+				     rdev_flowid, vnp_flowid);
+			return NULL;
+		}
+
+		/* Lookup on wwpn for NPORTs */
+		rn = csio_rn_lookup_wwpn(ln, rdevp->wwpn);
+		if (!rn)
+			goto alloc_rnode;
+
+	} else {
+		/* Lookup well-known ports with nport id */
+		if (csio_is_rnode_wka(rport_type)) {
+			match_rn = csio_rnode_lookup_portid(ln,
+				      ((ntohl(*port_id) >> 8) & CSIO_DID_MASK));
+			if (match_rn == NULL) {
+				csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+				goto alloc_rnode;
+			}
+
+			/*
+			 * Now compare the wwpn to confirm that
+			 * same port relogged in. If so update the matched rn.
+			 * Else, go ahead and alloc a new rnode.
+			 */
+			if (!memcmp(csio_rn_wwpn(match_rn), rdevp->wwpn, 8)) {
+				if (csio_is_rnode_ready(rn)) {
+					csio_ln_warn(ln,
+						     "rnode is already"
+						     "active ssni:x%x\n",
+						     rdev_flowid);
+					CSIO_ASSERT(0);
+				}
+				csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+				rn = match_rn;
+
+				/* Update rn */
+				goto found_rnode;
+			}
+			csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+			goto alloc_rnode;
+		}
+
+		/* wwpn match */
+		if (!memcmp(csio_rn_wwpn(rn), rdevp->wwpn, 8))
+			goto found_rnode;
+
+		/* Search for rnode that have same wwpn */
+		match_rn = csio_rn_lookup_wwpn(ln, rdevp->wwpn);
+		if (match_rn != NULL) {
+			csio_ln_dbg(ln,
+				"ssni:x%x changed for rport name(wwpn):%llx "
+				"did:x%x\n", rdev_flowid,
+				wwn_to_u64(rdevp->wwpn),
+				match_rn->nport_id);
+			csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+			rn = match_rn;
+		} else {
+			csio_ln_dbg(ln,
+				"rnode wwpn mismatch found ssni:x%x "
+				"name(wwpn):%llx\n",
+				rdev_flowid,
+				wwn_to_u64(csio_rn_wwpn(rn)));
+			if (csio_is_rnode_ready(rn)) {
+				csio_ln_warn(ln,
+					     "rnode is already active "
+					     "wwpn:%llx ssni:x%x\n",
+					     wwn_to_u64(csio_rn_wwpn(rn)),
+					     rdev_flowid);
+				CSIO_ASSERT(0);
+			}
+			csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+			goto alloc_rnode;
+		}
+	}
+
+found_rnode:
+	csio_ln_dbg(ln, "found rnode:%p ssni:x%x name(wwpn):%llx\n",
+		rn, rdev_flowid, wwn_to_u64(rdevp->wwpn));
+
+	/* Update flowid */
+	csio_rn_flowid(rn) = rdev_flowid;
+
+	/* update rdev entry */
+	rn->rdev_entry = rdevp;
+	CSIO_INC_STATS(ln, n_rnode_match);
+	return rn;
+
+alloc_rnode:
+	rn = csio_get_rnode(ln, rdev_flowid);
+	if (!rn)
+		return NULL;
+
+	csio_ln_dbg(ln, "alloc rnode:%p ssni:x%x name(wwpn):%llx\n",
+		rn, rdev_flowid, wwn_to_u64(rdevp->wwpn));
+
+	/* update rdev entry */
+	rn->rdev_entry = rdevp;
+	return rn;
+}
+
+/*
+ * csio_rn_verify_rparams - verify rparams.
+ * @ln: lnode
+ * @rn: rnode
+ * @rdevp: remote device params
+ * returns success if rparams are verified.
+ */
+static int
+csio_rn_verify_rparams(struct csio_lnode *ln, struct csio_rnode *rn,
+			struct fcoe_rdev_entry *rdevp)
+{
+	uint8_t null[8];
+	uint8_t rport_type;
+	uint8_t fc_class;
+	__be32 *did;
+
+	did = (__be32 *) &rdevp->r_id[0];
+	rport_type =
+		FW_RDEV_WR_RPORT_TYPE_GET(rdevp->rd_xfer_rdy_to_rport_type);
+	switch (rport_type) {
+	case FLOGI_VFPORT:
+		rn->role = CSIO_RNFR_FABRIC;
+		if (((ntohl(*did) >> 8) & CSIO_DID_MASK) != FC_FID_FLOGI) {
+			csio_ln_err(ln, "ssni:x%x invalid fabric portid\n",
+				csio_rn_flowid(rn));
+			return -EINVAL;
+		}
+		/* NPIV support */
+		if (FW_RDEV_WR_NPIV_GET(rdevp->vft_to_qos))
+			ln->flags |= CSIO_LNF_NPIVSUPP;
+
+		break;
+
+	case NS_VNPORT:
+		rn->role = CSIO_RNFR_NS;
+		if (((ntohl(*did) >> 8) & CSIO_DID_MASK) != FC_FID_DIR_SERV) {
+			csio_ln_err(ln, "ssni:x%x invalid fabric portid\n",
+				csio_rn_flowid(rn));
+			return -EINVAL;
+		}
+		break;
+
+	case REG_FC4_VNPORT:
+	case REG_VNPORT:
+		rn->role = CSIO_RNFR_NPORT;
+		if (rdevp->event_cause == PRLI_ACC_RCVD ||
+			rdevp->event_cause == PRLI_RCVD) {
+			if (FW_RDEV_WR_TASK_RETRY_ID_GET(
+							rdevp->enh_disc_to_tgt))
+				rn->fcp_flags |= FCP_SPPF_OVLY_ALLOW;
+
+			if (FW_RDEV_WR_RETRY_GET(rdevp->enh_disc_to_tgt))
+				rn->fcp_flags |= FCP_SPPF_RETRY;
+
+			if (FW_RDEV_WR_CONF_CMPL_GET(rdevp->enh_disc_to_tgt))
+				rn->fcp_flags |= FCP_SPPF_CONF_COMPL;
+
+			if (FW_RDEV_WR_TGT_GET(rdevp->enh_disc_to_tgt))
+				rn->role |= CSIO_RNFR_TARGET;
+
+			if (FW_RDEV_WR_INI_GET(rdevp->enh_disc_to_tgt))
+				rn->role |= CSIO_RNFR_INITIATOR;
+		}
+
+		break;
+
+	case FDMI_VNPORT:
+	case FAB_CTLR_VNPORT:
+		rn->role = 0;
+		break;
+
+	default:
+		csio_ln_err(ln, "ssni:x%x invalid rport type recv x%x\n",
+			csio_rn_flowid(rn), rport_type);
+		return -EINVAL;
+	}
+
+	/* validate wwpn/wwnn for Name server/remote port */
+	if (rport_type == REG_VNPORT || rport_type == NS_VNPORT) {
+		memset(null, 0, 8);
+		if (!memcmp(rdevp->wwnn, null, 8)) {
+			csio_ln_err(ln,
+				    "ssni:x%x invalid wwnn received from"
+				    " rport did:x%x\n",
+				    csio_rn_flowid(rn),
+				    (ntohl(*did) & CSIO_DID_MASK));
+			return -EINVAL;
+		}
+
+		if (!memcmp(rdevp->wwpn, null, 8)) {
+			csio_ln_err(ln,
+				    "ssni:x%x invalid wwpn received from"
+				    " rport did:x%x\n",
+				    csio_rn_flowid(rn),
+				    (ntohl(*did) & CSIO_DID_MASK));
+			return -EINVAL;
+		}
+
+	}
+
+	/* Copy wwnn, wwpn and nport id */
+	rn->nport_id = (ntohl(*did) >> 8) & CSIO_DID_MASK;
+	memcpy(csio_rn_wwnn(rn), rdevp->wwnn, 8);
+	memcpy(csio_rn_wwpn(rn), rdevp->wwpn, 8);
+	rn->rn_sparm.csp.sp_bb_data = rdevp->rcv_fr_sz;
+	fc_class = FW_RDEV_WR_CLASS_GET(rdevp->vft_to_qos);
+	rn->rn_sparm.clsp[fc_class - 1].cp_class = htons(FC_CPC_VALID);
+
+	return 0;
+}
+
+static void
+__csio_reg_rnode(struct csio_rnode *rn)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	spin_unlock_irq(&hw->lock);
+	csio_reg_rnode(rn);
+	spin_lock_irq(&hw->lock);
+
+	if (rn->role & CSIO_RNFR_TARGET)
+		ln->n_scsi_tgts++;
+
+	if (rn->nport_id == FC_FID_MGMT_SERV)
+		csio_ln_fdmi_start(ln, (void *) rn);
+}
+
+static void
+__csio_unreg_rnode(struct csio_rnode *rn)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	LIST_HEAD(tmp_q);
+	int cmpl = 0;
+
+	if (!list_empty(&rn->host_cmpl_q)) {
+		csio_dbg(hw, "Returning completion queue I/Os\n");
+		list_splice_tail_init(&rn->host_cmpl_q, &tmp_q);
+		cmpl = 1;
+	}
+
+	if (rn->role & CSIO_RNFR_TARGET) {
+		ln->n_scsi_tgts--;
+		ln->last_scan_ntgts--;
+	}
+
+	spin_unlock_irq(&hw->lock);
+	csio_unreg_rnode(rn);
+	spin_lock_irq(&hw->lock);
+
+	/* Cleanup I/Os that were waiting for rnode to unregister */
+	if (cmpl)
+		csio_scsi_cleanup_io_q(csio_hw_to_scsim(hw), &tmp_q);
+
+}
+
+/*****************************************************************************/
+/* START: Rnode SM                                                           */
+/*****************************************************************************/
+
+/*
+ * csio_rns_uninit -
+ * @rn - rnode
+ * @evt - SM event.
+ *
+ */
+static void
+csio_rns_uninit(struct csio_rnode *rn, enum csio_rn_ev evt)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	int ret = 0;
+
+	CSIO_INC_STATS(rn, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_RNFE_LOGGED_IN:
+	case CSIO_RNFE_PLOGI_RECV:
+		ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry);
+		if (!ret) {
+			csio_set_state(&rn->sm, csio_rns_ready);
+			__csio_reg_rnode(rn);
+		} else {
+			CSIO_INC_STATS(rn, n_err_inval);
+		}
+		break;
+	case CSIO_RNFE_LOGO_RECV:
+		csio_ln_dbg(ln,
+			    "ssni:x%x Ignoring event %d recv "
+			    "in rn state[uninit]\n", csio_rn_flowid(rn), evt);
+		CSIO_INC_STATS(rn, n_evt_drop);
+		break;
+	default:
+		csio_ln_dbg(ln,
+			    "ssni:x%x unexp event %d recv "
+			    "in rn state[uninit]\n", csio_rn_flowid(rn), evt);
+		CSIO_INC_STATS(rn, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_rns_ready -
+ * @rn - rnode
+ * @evt - SM event.
+ *
+ */
+static void
+csio_rns_ready(struct csio_rnode *rn, enum csio_rn_ev evt)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	int ret = 0;
+
+	CSIO_INC_STATS(rn, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_RNFE_LOGGED_IN:
+	case CSIO_RNFE_PLOGI_RECV:
+		csio_ln_dbg(ln,
+			"ssni:x%x Ignoring event %d recv from did:x%x "
+			"in rn state[ready]\n", csio_rn_flowid(rn), evt,
+			rn->nport_id);
+		CSIO_INC_STATS(rn, n_evt_drop);
+		break;
+
+	case CSIO_RNFE_PRLI_DONE:
+	case CSIO_RNFE_PRLI_RECV:
+		ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry);
+		if (!ret)
+			__csio_reg_rnode(rn);
+		else
+			CSIO_INC_STATS(rn, n_err_inval);
+
+		break;
+	case CSIO_RNFE_DOWN:
+		csio_set_state(&rn->sm, csio_rns_offline);
+		__csio_unreg_rnode(rn);
+
+		/* FW expected to internally aborted outstanding SCSI WRs
+		 * and return all SCSI WRs to host with status "ABORTED".
+		 */
+		break;
+
+	case CSIO_RNFE_LOGO_RECV:
+		csio_set_state(&rn->sm, csio_rns_offline);
+
+		__csio_unreg_rnode(rn);
+
+		/* FW expected to internally aborted outstanding SCSI WRs
+		 * and return all SCSI WRs to host with status "ABORTED".
+		 */
+		break;
+
+	case CSIO_RNFE_CLOSE:
+		/*
+		 * Each rnode receives CLOSE event when driver is removed or
+		 * device is reset
+		 * Note: All outstanding IOs on remote port need to returned
+		 * to uppper layer with appropriate error before sending
+		 * CLOSE event
+		 */
+		csio_set_state(&rn->sm, csio_rns_uninit);
+		__csio_unreg_rnode(rn);
+		break;
+
+	case CSIO_RNFE_NAME_MISSING:
+		csio_set_state(&rn->sm, csio_rns_disappeared);
+		__csio_unreg_rnode(rn);
+
+		/*
+		 * FW expected to internally aborted outstanding SCSI WRs
+		 * and return all SCSI WRs to host with status "ABORTED".
+		 */
+
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			"ssni:x%x unexp event %d recv from did:x%x "
+			"in rn state[uninit]\n", csio_rn_flowid(rn), evt,
+			rn->nport_id);
+		CSIO_INC_STATS(rn, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_rns_offline -
+ * @rn - rnode
+ * @evt - SM event.
+ *
+ */
+static void
+csio_rns_offline(struct csio_rnode *rn, enum csio_rn_ev evt)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	int ret = 0;
+
+	CSIO_INC_STATS(rn, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_RNFE_LOGGED_IN:
+	case CSIO_RNFE_PLOGI_RECV:
+		ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry);
+		if (!ret) {
+			csio_set_state(&rn->sm, csio_rns_ready);
+			__csio_reg_rnode(rn);
+		} else {
+			CSIO_INC_STATS(rn, n_err_inval);
+			csio_post_event(&rn->sm, CSIO_RNFE_CLOSE);
+		}
+		break;
+
+	case CSIO_RNFE_DOWN:
+		csio_ln_dbg(ln,
+			"ssni:x%x Ignoring event %d recv from did:x%x "
+			"in rn state[offline]\n", csio_rn_flowid(rn), evt,
+			rn->nport_id);
+		CSIO_INC_STATS(rn, n_evt_drop);
+		break;
+
+	case CSIO_RNFE_CLOSE:
+		/* Each rnode receives CLOSE event when driver is removed or
+		 * device is reset
+		 * Note: All outstanding IOs on remote port need to returned
+		 * to uppper layer with appropriate error before sending
+		 * CLOSE event
+		 */
+		csio_set_state(&rn->sm, csio_rns_uninit);
+		break;
+
+	case CSIO_RNFE_NAME_MISSING:
+		csio_set_state(&rn->sm, csio_rns_disappeared);
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			"ssni:x%x unexp event %d recv from did:x%x "
+			"in rn state[offline]\n", csio_rn_flowid(rn), evt,
+			rn->nport_id);
+		CSIO_INC_STATS(rn, n_evt_unexp);
+		break;
+	}
+}
+
+/*
+ * csio_rns_disappeared -
+ * @rn - rnode
+ * @evt - SM event.
+ *
+ */
+static void
+csio_rns_disappeared(struct csio_rnode *rn, enum csio_rn_ev evt)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	int ret = 0;
+
+	CSIO_INC_STATS(rn, n_evt_sm[evt]);
+
+	switch (evt) {
+	case CSIO_RNFE_LOGGED_IN:
+	case CSIO_RNFE_PLOGI_RECV:
+		ret = csio_rn_verify_rparams(ln, rn, rn->rdev_entry);
+		if (!ret) {
+			csio_set_state(&rn->sm, csio_rns_ready);
+			__csio_reg_rnode(rn);
+		} else {
+			CSIO_INC_STATS(rn, n_err_inval);
+			csio_post_event(&rn->sm, CSIO_RNFE_CLOSE);
+		}
+		break;
+
+	case CSIO_RNFE_CLOSE:
+		/* Each rnode receives CLOSE event when driver is removed or
+		 * device is reset.
+		 * Note: All outstanding IOs on remote port need to returned
+		 * to uppper layer with appropriate error before sending
+		 * CLOSE event
+		 */
+		csio_set_state(&rn->sm, csio_rns_uninit);
+		break;
+
+	case CSIO_RNFE_DOWN:
+	case CSIO_RNFE_NAME_MISSING:
+		csio_ln_dbg(ln,
+			"ssni:x%x Ignoring event %d recv from did x%x"
+			"in rn state[disappeared]\n", csio_rn_flowid(rn),
+			evt, rn->nport_id);
+		break;
+
+	default:
+		csio_ln_dbg(ln,
+			"ssni:x%x unexp event %d recv from did x%x"
+			"in rn state[disappeared]\n", csio_rn_flowid(rn),
+			evt, rn->nport_id);
+		CSIO_INC_STATS(rn, n_evt_unexp);
+		break;
+	}
+}
+
+/*****************************************************************************/
+/* END: Rnode SM                                                             */
+/*****************************************************************************/
+
+/*
+ * csio_rnode_devloss_handler - Device loss event handler
+ * @rn: rnode
+ *
+ * Post event to close rnode SM and free rnode.
+ */
+void
+csio_rnode_devloss_handler(struct csio_rnode *rn)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+
+	/* ignore if same rnode came back as online */
+	if (csio_is_rnode_ready(rn))
+		return;
+
+	csio_post_event(&rn->sm, CSIO_RNFE_CLOSE);
+
+	/* Free rn if in uninit state */
+	if (csio_is_rnode_uninit(rn))
+		csio_put_rnode(ln, rn);
+}
+
+/**
+ * csio_rnode_fwevt_handler - Event handler for firmware rnode events.
+ * @rn:		rnode
+ *
+ */
+void
+csio_rnode_fwevt_handler(struct csio_rnode *rn, uint8_t fwevt)
+{
+	struct csio_lnode *ln = csio_rnode_to_lnode(rn);
+	enum csio_rn_ev evt;
+
+	evt = CSIO_FWE_TO_RNFE(fwevt);
+	if (!evt) {
+		csio_ln_err(ln, "ssni:x%x Unhandled FW Rdev event: %d\n",
+			    csio_rn_flowid(rn), fwevt);
+		CSIO_INC_STATS(rn, n_evt_unexp);
+		return;
+	}
+	CSIO_INC_STATS(rn, n_evt_fw[fwevt]);
+
+	/* Track previous & current events for debugging */
+	rn->prev_evt = rn->cur_evt;
+	rn->cur_evt = fwevt;
+
+	/* Post event to rnode SM */
+	csio_post_event(&rn->sm, evt);
+
+	/* Free rn if in uninit state */
+	if (csio_is_rnode_uninit(rn))
+		csio_put_rnode(ln, rn);
+}
+
+/*
+ * csio_rnode_init - Initialize rnode.
+ * @rn: RNode
+ * @ln: Associated lnode
+ *
+ * Caller is responsible for holding the lock. The lock is required
+ * to be held for inserting the rnode in ln->rnhead list.
+ */
+static int
+csio_rnode_init(struct csio_rnode *rn, struct csio_lnode *ln)
+{
+	csio_rnode_to_lnode(rn) = ln;
+	csio_init_state(&rn->sm, csio_rns_uninit);
+	INIT_LIST_HEAD(&rn->host_cmpl_q);
+	csio_rn_flowid(rn) = CSIO_INVALID_IDX;
+
+	/* Add rnode to list of lnodes->rnhead */
+	list_add_tail(&rn->sm.sm_list, &ln->rnhead);
+
+	return 0;
+}
+
+static void
+csio_rnode_exit(struct csio_rnode *rn)
+{
+	list_del_init(&rn->sm.sm_list);
+	CSIO_DB_ASSERT(list_empty(&rn->host_cmpl_q));
+}
diff --git a/drivers/scsi/csiostor/csio_rnode.h b/drivers/scsi/csiostor/csio_rnode.h
new file mode 100644
index 0000000..a3b434c
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_rnode.h
@@ -0,0 +1,141 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_RNODE_H__
+#define __CSIO_RNODE_H__
+
+#include "csio_defs.h"
+
+/* State machine evets */
+enum csio_rn_ev {
+	CSIO_RNFE_NONE = (uint32_t)0,			/* None */
+	CSIO_RNFE_LOGGED_IN,				/* [N/F]Port login
+							 * complete.
+							 */
+	CSIO_RNFE_PRLI_DONE,				/* PRLI completed */
+	CSIO_RNFE_PLOGI_RECV,				/* Received PLOGI */
+	CSIO_RNFE_PRLI_RECV,				/* Received PLOGI */
+	CSIO_RNFE_LOGO_RECV,				/* Received LOGO */
+	CSIO_RNFE_PRLO_RECV,				/* Received PRLO */
+	CSIO_RNFE_DOWN,					/* Rnode is down */
+	CSIO_RNFE_CLOSE,				/* Close rnode */
+	CSIO_RNFE_NAME_MISSING,				/* Rnode name missing
+							 * in name server.
+							 */
+	CSIO_RNFE_MAX_EVENT,
+};
+
+/* rnode stats */
+struct csio_rnode_stats {
+	uint32_t	n_err;		/* error */
+	uint32_t	n_err_inval;	/* invalid parameter */
+	uint32_t	n_err_nomem;	/* error nomem */
+	uint32_t	n_evt_unexp;	/* unexpected event */
+	uint32_t	n_evt_drop;	/* unexpected event */
+	uint32_t	n_evt_fw[RSCN_DEV_LOST];	/* fw events */
+	enum csio_rn_ev	n_evt_sm[CSIO_RNFE_MAX_EVENT];	/* State m/c events */
+	uint32_t	n_lun_rst;	/* Number of resets of
+					 * of LUNs under this
+					 * target
+					 */
+	uint32_t	n_lun_rst_fail;	/* Number of LUN reset
+					 * failures.
+					 */
+	uint32_t	n_tgt_rst;	/* Number of target resets */
+	uint32_t	n_tgt_rst_fail;	/* Number of target reset
+					 * failures.
+					 */
+};
+
+/* Defines for rnode role */
+#define	CSIO_RNFR_INITIATOR	0x1
+#define	CSIO_RNFR_TARGET	0x2
+#define CSIO_RNFR_FABRIC	0x4
+#define	CSIO_RNFR_NS		0x8
+#define CSIO_RNFR_NPORT		0x10
+
+struct csio_rnode {
+	struct csio_sm		sm;			/* State machine -
+							 * should be the
+							 * 1st member
+							 */
+	struct csio_lnode	*lnp;			/* Pointer to owning
+							 * Lnode */
+	uint32_t		flowid;			/* Firmware ID */
+	struct list_head	host_cmpl_q;		/* SCSI IOs
+							 * pending to completed
+							 * to Mid-layer.
+							 */
+	/* FC identifiers for remote node */
+	uint32_t		nport_id;
+	uint16_t		fcp_flags;		/* FCP Flags */
+	uint8_t			cur_evt;		/* Current event */
+	uint8_t			prev_evt;		/* Previous event */
+	uint32_t		role;			/* Fabric/Target/
+							 * Initiator/NS
+							 */
+	struct fcoe_rdev_entry		*rdev_entry;	/* Rdev entry */
+	struct csio_service_parms	rn_sparm;
+
+	/* FC transport attributes */
+	struct fc_rport		*rport;		/* FC transport rport */
+	uint32_t		supp_classes;	/* Supported FC classes */
+	uint32_t		maxframe_size;	/* Max Frame size */
+	uint32_t		scsi_id;	/* Transport given SCSI id */
+
+	struct csio_rnode_stats	stats;		/* Common rnode stats */
+};
+
+#define csio_rn_flowid(rn)			((rn)->flowid)
+#define csio_rn_wwpn(rn)			((rn)->rn_sparm.wwpn)
+#define csio_rn_wwnn(rn)			((rn)->rn_sparm.wwnn)
+#define csio_rnode_to_lnode(rn)			((rn)->lnp)
+
+int csio_is_rnode_ready(struct csio_rnode *rn);
+void csio_rnode_state_to_str(struct csio_rnode *rn, int8_t *str);
+
+struct csio_rnode *csio_rnode_lookup_portid(struct csio_lnode *, uint32_t);
+struct csio_rnode *csio_confirm_rnode(struct csio_lnode *,
+					  uint32_t, struct fcoe_rdev_entry *);
+
+void csio_rnode_fwevt_handler(struct csio_rnode *rn, uint8_t fwevt);
+
+void csio_put_rnode(struct csio_lnode *ln, struct csio_rnode *rn);
+
+void csio_reg_rnode(struct csio_rnode *);
+void csio_unreg_rnode(struct csio_rnode *);
+
+void csio_rnode_devloss_handler(struct csio_rnode *);
+
+#endif /* ifndef __CSIO_RNODE_H__ */
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
new file mode 100644
index 0000000..ddd38e5
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -0,0 +1,2555 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+#include <asm/page.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_fc.h>
+
+#include "csio_hw.h"
+#include "csio_lnode.h"
+#include "csio_rnode.h"
+#include "csio_scsi.h"
+#include "csio_init.h"
+
+int csio_scsi_eqsize = 65536;
+int csio_scsi_iqlen = 128;
+int csio_scsi_ioreqs = 2048;
+uint32_t csio_max_scan_tmo;
+uint32_t csio_delta_scan_tmo = 5;
+int csio_lun_qdepth = 32;
+
+static int csio_ddp_descs = 128;
+
+static int csio_do_abrt_cls(struct csio_hw *,
+				      struct csio_ioreq *, bool);
+
+static void csio_scsis_uninit(struct csio_ioreq *, enum csio_scsi_ev);
+static void csio_scsis_io_active(struct csio_ioreq *, enum csio_scsi_ev);
+static void csio_scsis_tm_active(struct csio_ioreq *, enum csio_scsi_ev);
+static void csio_scsis_aborting(struct csio_ioreq *, enum csio_scsi_ev);
+static void csio_scsis_closing(struct csio_ioreq *, enum csio_scsi_ev);
+static void csio_scsis_shost_cmpl_await(struct csio_ioreq *, enum csio_scsi_ev);
+
+/*
+ * csio_scsi_match_io - Match an ioreq with the given SCSI level data.
+ * @ioreq: The I/O request
+ * @sld: Level information
+ *
+ * Should be called with lock held.
+ *
+ */
+static bool
+csio_scsi_match_io(struct csio_ioreq *ioreq, struct csio_scsi_level_data *sld)
+{
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(ioreq);
+
+	switch (sld->level) {
+	case CSIO_LEV_LUN:
+		if (scmnd == NULL)
+			return false;
+
+		return ((ioreq->lnode == sld->lnode) &&
+			(ioreq->rnode == sld->rnode) &&
+			((uint64_t)scmnd->device->lun == sld->oslun));
+
+	case CSIO_LEV_RNODE:
+		return ((ioreq->lnode == sld->lnode) &&
+				(ioreq->rnode == sld->rnode));
+	case CSIO_LEV_LNODE:
+		return (ioreq->lnode == sld->lnode);
+	case CSIO_LEV_ALL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
+ * csio_scsi_gather_active_ios - Gather active I/Os based on level
+ * @scm: SCSI module
+ * @sld: Level information
+ * @dest: The queue where these I/Os have to be gathered.
+ *
+ * Should be called with lock held.
+ */
+static void
+csio_scsi_gather_active_ios(struct csio_scsim *scm,
+			    struct csio_scsi_level_data *sld,
+			    struct list_head *dest)
+{
+	struct list_head *tmp, *next;
+
+	if (list_empty(&scm->active_q))
+		return;
+
+	/* Just splice the entire active_q into dest */
+	if (sld->level == CSIO_LEV_ALL) {
+		list_splice_tail_init(&scm->active_q, dest);
+		return;
+	}
+
+	list_for_each_safe(tmp, next, &scm->active_q) {
+		if (csio_scsi_match_io((struct csio_ioreq *)tmp, sld)) {
+			list_del_init(tmp);
+			list_add_tail(tmp, dest);
+		}
+	}
+}
+
+static inline bool
+csio_scsi_itnexus_loss_error(uint16_t error)
+{
+	switch (error) {
+	case FW_ERR_LINK_DOWN:
+	case FW_RDEV_NOT_READY:
+	case FW_ERR_RDEV_LOST:
+	case FW_ERR_RDEV_LOGO:
+	case FW_ERR_RDEV_IMPL_LOGO:
+		return 1;
+	}
+	return 0;
+}
+
+static inline void
+csio_scsi_tag(struct scsi_cmnd *scmnd, uint8_t *tag, uint8_t hq,
+	      uint8_t oq, uint8_t sq)
+{
+	char stag[2];
+
+	if (scsi_populate_tag_msg(scmnd, stag)) {
+		switch (stag[0]) {
+		case HEAD_OF_QUEUE_TAG:
+			*tag = hq;
+			break;
+		case ORDERED_QUEUE_TAG:
+			*tag = oq;
+			break;
+		default:
+			*tag = sq;
+			break;
+		}
+	} else
+		*tag = 0;
+}
+
+/*
+ * csio_scsi_fcp_cmnd - Frame the SCSI FCP command paylod.
+ * @req: IO req structure.
+ * @addr: DMA location to place the payload.
+ *
+ * This routine is shared between FCP_WRITE, FCP_READ and FCP_CMD requests.
+ */
+static inline void
+csio_scsi_fcp_cmnd(struct csio_ioreq *req, void *addr)
+{
+	struct fcp_cmnd *fcp_cmnd = (struct fcp_cmnd *)addr;
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
+
+	/* Check for Task Management */
+	if (likely(scmnd->SCp.Message == 0)) {
+		int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun);
+		fcp_cmnd->fc_tm_flags = 0;
+		fcp_cmnd->fc_cmdref = 0;
+		fcp_cmnd->fc_pri_ta = 0;
+
+		memcpy(fcp_cmnd->fc_cdb, scmnd->cmnd, 16);
+		csio_scsi_tag(scmnd, &fcp_cmnd->fc_pri_ta,
+			      FCP_PTA_HEADQ, FCP_PTA_ORDERED, FCP_PTA_SIMPLE);
+		fcp_cmnd->fc_dl = cpu_to_be32(scsi_bufflen(scmnd));
+
+		if (req->nsge)
+			if (req->datadir == DMA_TO_DEVICE)
+				fcp_cmnd->fc_flags = FCP_CFL_WRDATA;
+			else
+				fcp_cmnd->fc_flags = FCP_CFL_RDDATA;
+		else
+			fcp_cmnd->fc_flags = 0;
+	} else {
+		memset(fcp_cmnd, 0, sizeof(*fcp_cmnd));
+		int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun);
+		fcp_cmnd->fc_tm_flags = (uint8_t)scmnd->SCp.Message;
+	}
+}
+
+/*
+ * csio_scsi_init_cmd_wr - Initialize the SCSI CMD WR.
+ * @req: IO req structure.
+ * @addr: DMA location to place the payload.
+ * @size: Size of WR (including FW WR + immed data + rsp SG entry
+ *
+ * Wrapper for populating fw_scsi_cmd_wr.
+ */
+static inline void
+csio_scsi_init_cmd_wr(struct csio_ioreq *req, void *addr, uint32_t size)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_rnode *rn = req->rnode;
+	struct fw_scsi_cmd_wr *wr = (struct fw_scsi_cmd_wr *)addr;
+	struct csio_dma_buf *dma_buf;
+	uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len;
+
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_CMD_WR) |
+					  FW_SCSI_CMD_WR_IMMDLEN(imm));
+	wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) |
+					    FW_WR_LEN16(
+						DIV_ROUND_UP(size, 16)));
+
+	wr->cookie = (uintptr_t) req;
+	wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx));
+	wr->tmo_val = (uint8_t) req->tmo;
+	wr->r3 = 0;
+	memset(&wr->r5, 0, 8);
+
+	/* Get RSP DMA buffer */
+	dma_buf = &req->dma_buf;
+
+	/* Prepare RSP SGL */
+	wr->rsp_dmalen = cpu_to_be32(dma_buf->len);
+	wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr);
+
+	wr->r6 = 0;
+
+	wr->u.fcoe.ctl_pri = 0;
+	wr->u.fcoe.cp_en_class = 0;
+	wr->u.fcoe.r4_lo[0] = 0;
+	wr->u.fcoe.r4_lo[1] = 0;
+
+	/* Frame a FCP command */
+	csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)addr +
+				    sizeof(struct fw_scsi_cmd_wr)));
+}
+
+#define CSIO_SCSI_CMD_WR_SZ(_imm)					\
+	(sizeof(struct fw_scsi_cmd_wr) +		/* WR size */	\
+	 ALIGN((_imm), 16))				/* Immed data */
+
+#define CSIO_SCSI_CMD_WR_SZ_16(_imm)					\
+			(ALIGN(CSIO_SCSI_CMD_WR_SZ((_imm)), 16))
+
+/*
+ * csio_scsi_cmd - Create a SCSI CMD WR.
+ * @req: IO req structure.
+ *
+ * Gets a WR slot in the ingress queue and initializes it with SCSI CMD WR.
+ *
+ */
+static inline void
+csio_scsi_cmd(struct csio_ioreq *req)
+{
+	struct csio_wr_pair wrp;
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+	uint32_t size = CSIO_SCSI_CMD_WR_SZ_16(scsim->proto_cmd_len);
+
+	req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
+	if (unlikely(req->drv_status != 0))
+		return;
+
+	if (wrp.size1 >= size) {
+		/* Initialize WR in one shot */
+		csio_scsi_init_cmd_wr(req, wrp.addr1, size);
+	} else {
+		uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx);
+
+		/*
+		 * Make a temporary copy of the WR and write back
+		 * the copy into the WR pair.
+		 */
+		csio_scsi_init_cmd_wr(req, (void *)tmpwr, size);
+		memcpy(wrp.addr1, tmpwr, wrp.size1);
+		memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
+	}
+}
+
+/*
+ * csio_scsi_init_ulptx_dsgl - Fill in a ULP_TX_SC_DSGL
+ * @hw: HW module
+ * @req: IO request
+ * @sgl: ULP TX SGL pointer.
+ *
+ */
+static inline void
+csio_scsi_init_ultptx_dsgl(struct csio_hw *hw, struct csio_ioreq *req,
+			   struct ulptx_sgl *sgl)
+{
+	struct ulptx_sge_pair *sge_pair = NULL;
+	struct scatterlist *sgel;
+	uint32_t i = 0;
+	uint32_t xfer_len;
+	struct list_head *tmp;
+	struct csio_dma_buf *dma_buf;
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
+
+	sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | ULPTX_MORE |
+				     ULPTX_NSGE(req->nsge));
+	/* Now add the data SGLs */
+	if (likely(!req->dcopy)) {
+		scsi_for_each_sg(scmnd, sgel, req->nsge, i) {
+			if (i == 0) {
+				sgl->addr0 = cpu_to_be64(sg_dma_address(sgel));
+				sgl->len0 = cpu_to_be32(sg_dma_len(sgel));
+				sge_pair = (struct ulptx_sge_pair *)(sgl + 1);
+				continue;
+			}
+			if ((i - 1) & 0x1) {
+				sge_pair->addr[1] = cpu_to_be64(
+							sg_dma_address(sgel));
+				sge_pair->len[1] = cpu_to_be32(
+							sg_dma_len(sgel));
+				sge_pair++;
+			} else {
+				sge_pair->addr[0] = cpu_to_be64(
+							sg_dma_address(sgel));
+				sge_pair->len[0] = cpu_to_be32(
+							sg_dma_len(sgel));
+			}
+		}
+	} else {
+		/* Program sg elements with driver's DDP buffer */
+		xfer_len = scsi_bufflen(scmnd);
+		list_for_each(tmp, &req->gen_list) {
+			dma_buf = (struct csio_dma_buf *)tmp;
+			if (i == 0) {
+				sgl->addr0 = cpu_to_be64(dma_buf->paddr);
+				sgl->len0 = cpu_to_be32(
+						min(xfer_len, dma_buf->len));
+				sge_pair = (struct ulptx_sge_pair *)(sgl + 1);
+			} else if ((i - 1) & 0x1) {
+				sge_pair->addr[1] = cpu_to_be64(dma_buf->paddr);
+				sge_pair->len[1] = cpu_to_be32(
+						min(xfer_len, dma_buf->len));
+				sge_pair++;
+			} else {
+				sge_pair->addr[0] = cpu_to_be64(dma_buf->paddr);
+				sge_pair->len[0] = cpu_to_be32(
+						min(xfer_len, dma_buf->len));
+			}
+			xfer_len -= min(xfer_len, dma_buf->len);
+			i++;
+		}
+	}
+}
+
+/*
+ * csio_scsi_init_read_wr - Initialize the READ SCSI WR.
+ * @req: IO req structure.
+ * @wrp: DMA location to place the payload.
+ * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL
+ *
+ * Wrapper for populating fw_scsi_read_wr.
+ */
+static inline void
+csio_scsi_init_read_wr(struct csio_ioreq *req, void *wrp, uint32_t size)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_rnode *rn = req->rnode;
+	struct fw_scsi_read_wr *wr = (struct fw_scsi_read_wr *)wrp;
+	struct ulptx_sgl *sgl;
+	struct csio_dma_buf *dma_buf;
+	uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len;
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
+
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_READ_WR) |
+				     FW_SCSI_READ_WR_IMMDLEN(imm));
+	wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) |
+				       FW_WR_LEN16(DIV_ROUND_UP(size, 16)));
+	wr->cookie = (uintptr_t)req;
+	wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx));
+	wr->tmo_val = (uint8_t)(req->tmo);
+	wr->use_xfer_cnt = 1;
+	wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd));
+	wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd));
+	/* Get RSP DMA buffer */
+	dma_buf = &req->dma_buf;
+
+	/* Prepare RSP SGL */
+	wr->rsp_dmalen = cpu_to_be32(dma_buf->len);
+	wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr);
+
+	wr->r4 = 0;
+
+	wr->u.fcoe.ctl_pri = 0;
+	wr->u.fcoe.cp_en_class = 0;
+	wr->u.fcoe.r3_lo[0] = 0;
+	wr->u.fcoe.r3_lo[1] = 0;
+	csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp +
+					sizeof(struct fw_scsi_read_wr)));
+
+	/* Move WR pointer past command and immediate data */
+	sgl = (struct ulptx_sgl *)((uintptr_t)wrp +
+			      sizeof(struct fw_scsi_read_wr) + ALIGN(imm, 16));
+
+	/* Fill in the DSGL */
+	csio_scsi_init_ultptx_dsgl(hw, req, sgl);
+}
+
+/*
+ * csio_scsi_init_write_wr - Initialize the WRITE SCSI WR.
+ * @req: IO req structure.
+ * @wrp: DMA location to place the payload.
+ * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL
+ *
+ * Wrapper for populating fw_scsi_write_wr.
+ */
+static inline void
+csio_scsi_init_write_wr(struct csio_ioreq *req, void *wrp, uint32_t size)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_rnode *rn = req->rnode;
+	struct fw_scsi_write_wr *wr = (struct fw_scsi_write_wr *)wrp;
+	struct ulptx_sgl *sgl;
+	struct csio_dma_buf *dma_buf;
+	uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len;
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
+
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_WRITE_WR) |
+				     FW_SCSI_WRITE_WR_IMMDLEN(imm));
+	wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) |
+				       FW_WR_LEN16(DIV_ROUND_UP(size, 16)));
+	wr->cookie = (uintptr_t)req;
+	wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx));
+	wr->tmo_val = (uint8_t)(req->tmo);
+	wr->use_xfer_cnt = 1;
+	wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd));
+	wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd));
+	/* Get RSP DMA buffer */
+	dma_buf = &req->dma_buf;
+
+	/* Prepare RSP SGL */
+	wr->rsp_dmalen = cpu_to_be32(dma_buf->len);
+	wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr);
+
+	wr->r4 = 0;
+
+	wr->u.fcoe.ctl_pri = 0;
+	wr->u.fcoe.cp_en_class = 0;
+	wr->u.fcoe.r3_lo[0] = 0;
+	wr->u.fcoe.r3_lo[1] = 0;
+	csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp +
+					sizeof(struct fw_scsi_write_wr)));
+
+	/* Move WR pointer past command and immediate data */
+	sgl = (struct ulptx_sgl *)((uintptr_t)wrp +
+			      sizeof(struct fw_scsi_write_wr) + ALIGN(imm, 16));
+
+	/* Fill in the DSGL */
+	csio_scsi_init_ultptx_dsgl(hw, req, sgl);
+}
+
+/* Calculate WR size needed for fw_scsi_read_wr/fw_scsi_write_wr */
+#define CSIO_SCSI_DATA_WRSZ(req, oper, sz, imm)				       \
+do {									       \
+	(sz) = sizeof(struct fw_scsi_##oper##_wr) +	/* WR size */          \
+	       ALIGN((imm), 16) +			/* Immed data */       \
+	       sizeof(struct ulptx_sgl);		/* ulptx_sgl */	       \
+									       \
+	if (unlikely((req)->nsge > 1))				               \
+		(sz) += (sizeof(struct ulptx_sge_pair) *		       \
+				(ALIGN(((req)->nsge - 1), 2) / 2));            \
+							/* Data SGE */	       \
+} while (0)
+
+/*
+ * csio_scsi_read - Create a SCSI READ WR.
+ * @req: IO req structure.
+ *
+ * Gets a WR slot in the ingress queue and initializes it with
+ * SCSI READ WR.
+ *
+ */
+static inline void
+csio_scsi_read(struct csio_ioreq *req)
+{
+	struct csio_wr_pair wrp;
+	uint32_t size;
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+
+	CSIO_SCSI_DATA_WRSZ(req, read, size, scsim->proto_cmd_len);
+	size = ALIGN(size, 16);
+
+	req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
+	if (likely(req->drv_status == 0)) {
+		if (likely(wrp.size1 >= size)) {
+			/* Initialize WR in one shot */
+			csio_scsi_init_read_wr(req, wrp.addr1, size);
+		} else {
+			uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx);
+			/*
+			 * Make a temporary copy of the WR and write back
+			 * the copy into the WR pair.
+			 */
+			csio_scsi_init_read_wr(req, (void *)tmpwr, size);
+			memcpy(wrp.addr1, tmpwr, wrp.size1);
+			memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
+		}
+	}
+}
+
+/*
+ * csio_scsi_write - Create a SCSI WRITE WR.
+ * @req: IO req structure.
+ *
+ * Gets a WR slot in the ingress queue and initializes it with
+ * SCSI WRITE WR.
+ *
+ */
+static inline void
+csio_scsi_write(struct csio_ioreq *req)
+{
+	struct csio_wr_pair wrp;
+	uint32_t size;
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+
+	CSIO_SCSI_DATA_WRSZ(req, write, size, scsim->proto_cmd_len);
+	size = ALIGN(size, 16);
+
+	req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
+	if (likely(req->drv_status == 0)) {
+		if (likely(wrp.size1 >= size)) {
+			/* Initialize WR in one shot */
+			csio_scsi_init_write_wr(req, wrp.addr1, size);
+		} else {
+			uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx);
+			/*
+			 * Make a temporary copy of the WR and write back
+			 * the copy into the WR pair.
+			 */
+			csio_scsi_init_write_wr(req, (void *)tmpwr, size);
+			memcpy(wrp.addr1, tmpwr, wrp.size1);
+			memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
+		}
+	}
+}
+
+/*
+ * csio_setup_ddp - Setup DDP buffers for Read request.
+ * @req: IO req structure.
+ *
+ * Checks SGLs/Data buffers are virtually contiguous required for DDP.
+ * If contiguous,driver posts SGLs in the WR otherwise post internal
+ * buffers for such request for DDP.
+ */
+static inline void
+csio_setup_ddp(struct csio_scsim *scsim, struct csio_ioreq *req)
+{
+#ifdef __CSIO_DEBUG__
+	struct csio_hw *hw = req->lnode->hwp;
+#endif
+	struct scatterlist *sgel = NULL;
+	struct scsi_cmnd *scmnd = csio_scsi_cmnd(req);
+	uint64_t sg_addr = 0;
+	uint32_t ddp_pagesz = 4096;
+	uint32_t buf_off;
+	struct csio_dma_buf *dma_buf = NULL;
+	uint32_t alloc_len = 0;
+	uint32_t xfer_len = 0;
+	uint32_t sg_len = 0;
+	uint32_t i;
+
+	scsi_for_each_sg(scmnd, sgel, req->nsge, i) {
+		sg_addr = sg_dma_address(sgel);
+		sg_len	= sg_dma_len(sgel);
+
+		buf_off = sg_addr & (ddp_pagesz - 1);
+
+		/* Except 1st buffer,all buffer addr have to be Page aligned */
+		if (i != 0 && buf_off) {
+			csio_dbg(hw, "SGL addr not DDP aligned (%llx:%d)\n",
+				 sg_addr, sg_len);
+			goto unaligned;
+		}
+
+		/* Except last buffer,all buffer must end on page boundary */
+		if ((i != (req->nsge - 1)) &&
+			((buf_off + sg_len) & (ddp_pagesz - 1))) {
+			csio_dbg(hw,
+				 "SGL addr not ending on page boundary"
+				 "(%llx:%d)\n", sg_addr, sg_len);
+			goto unaligned;
+		}
+	}
+
+	/* SGL's are virtually contiguous. HW will DDP to SGLs */
+	req->dcopy = 0;
+	csio_scsi_read(req);
+
+	return;
+
+unaligned:
+	CSIO_INC_STATS(scsim, n_unaligned);
+	/*
+	 * For unaligned SGLs, driver will allocate internal DDP buffer.
+	 * Once command is completed data from DDP buffer copied to SGLs
+	 */
+	req->dcopy = 1;
+
+	/* Use gen_list to store the DDP buffers */
+	INIT_LIST_HEAD(&req->gen_list);
+	xfer_len = scsi_bufflen(scmnd);
+
+	i = 0;
+	/* Allocate ddp buffers for this request */
+	while (alloc_len < xfer_len) {
+		dma_buf = csio_get_scsi_ddp(scsim);
+		if (dma_buf == NULL || i > scsim->max_sge) {
+			req->drv_status = -EBUSY;
+			break;
+		}
+		alloc_len += dma_buf->len;
+		/* Added to IO req */
+		list_add_tail(&dma_buf->list, &req->gen_list);
+		i++;
+	}
+
+	if (!req->drv_status) {
+		/* set number of ddp bufs used */
+		req->nsge = i;
+		csio_scsi_read(req);
+		return;
+	}
+
+	 /* release dma descs */
+	if (i > 0)
+		csio_put_scsi_ddp_list(scsim, &req->gen_list, i);
+}
+
+/*
+ * csio_scsi_init_abrt_cls_wr - Initialize an ABORT/CLOSE WR.
+ * @req: IO req structure.
+ * @addr: DMA location to place the payload.
+ * @size: Size of WR
+ * @abort: abort OR close
+ *
+ * Wrapper for populating fw_scsi_cmd_wr.
+ */
+static inline void
+csio_scsi_init_abrt_cls_wr(struct csio_ioreq *req, void *addr, uint32_t size,
+			   bool abort)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_rnode *rn = req->rnode;
+	struct fw_scsi_abrt_cls_wr *wr = (struct fw_scsi_abrt_cls_wr *)addr;
+
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_ABRT_CLS_WR));
+	wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) |
+					    FW_WR_LEN16(
+						DIV_ROUND_UP(size, 16)));
+
+	wr->cookie = (uintptr_t) req;
+	wr->iqid = cpu_to_be16(csio_q_physiqid(hw, req->iq_idx));
+	wr->tmo_val = (uint8_t) req->tmo;
+	/* 0 for CHK_ALL_IO tells FW to look up t_cookie */
+	wr->sub_opcode_to_chk_all_io =
+				(FW_SCSI_ABRT_CLS_WR_SUB_OPCODE(abort) |
+				 FW_SCSI_ABRT_CLS_WR_CHK_ALL_IO(0));
+	wr->r3[0] = 0;
+	wr->r3[1] = 0;
+	wr->r3[2] = 0;
+	wr->r3[3] = 0;
+	/* Since we re-use the same ioreq for abort as well */
+	wr->t_cookie = (uintptr_t) req;
+}
+
+static inline void
+csio_scsi_abrt_cls(struct csio_ioreq *req, bool abort)
+{
+	struct csio_wr_pair wrp;
+	struct csio_hw *hw = req->lnode->hwp;
+	uint32_t size = ALIGN(sizeof(struct fw_scsi_abrt_cls_wr), 16);
+
+	req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp);
+	if (req->drv_status != 0)
+		return;
+
+	if (wrp.size1 >= size) {
+		/* Initialize WR in one shot */
+		csio_scsi_init_abrt_cls_wr(req, wrp.addr1, size, abort);
+	} else {
+		uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx);
+		/*
+		 * Make a temporary copy of the WR and write back
+		 * the copy into the WR pair.
+		 */
+		csio_scsi_init_abrt_cls_wr(req, (void *)tmpwr, size, abort);
+		memcpy(wrp.addr1, tmpwr, wrp.size1);
+		memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1);
+	}
+}
+
+/*****************************************************************************/
+/* START: SCSI SM                                                            */
+/*****************************************************************************/
+static void
+csio_scsis_uninit(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+
+	switch (evt) {
+	case CSIO_SCSIE_START_IO:
+
+		if (req->nsge) {
+			if (req->datadir == DMA_TO_DEVICE) {
+				req->dcopy = 0;
+				csio_scsi_write(req);
+			} else
+				csio_setup_ddp(scsim, req);
+		} else {
+			csio_scsi_cmd(req);
+		}
+
+		if (likely(req->drv_status == 0)) {
+			/* change state and enqueue on active_q */
+			csio_set_state(&req->sm, csio_scsis_io_active);
+			list_add_tail(&req->sm.sm_list, &scsim->active_q);
+			csio_wr_issue(hw, req->eq_idx, false);
+			CSIO_INC_STATS(scsim, n_active);
+
+			return;
+		}
+		break;
+
+	case CSIO_SCSIE_START_TM:
+		csio_scsi_cmd(req);
+		if (req->drv_status == 0) {
+			/*
+			 * NOTE: We collect the affected I/Os prior to issuing
+			 * LUN reset, and not after it. This is to prevent
+			 * aborting I/Os that get issued after the LUN reset,
+			 * but prior to LUN reset completion (in the event that
+			 * the host stack has not blocked I/Os to a LUN that is
+			 * being reset.
+			 */
+			csio_set_state(&req->sm, csio_scsis_tm_active);
+			list_add_tail(&req->sm.sm_list, &scsim->active_q);
+			csio_wr_issue(hw, req->eq_idx, false);
+			CSIO_INC_STATS(scsim, n_tm_active);
+		}
+		return;
+
+	case CSIO_SCSIE_ABORT:
+	case CSIO_SCSIE_CLOSE:
+		/*
+		 * NOTE:
+		 * We could get here due to  :
+		 * - a window in the cleanup path of the SCSI module
+		 *   (csio_scsi_abort_io()). Please see NOTE in this function.
+		 * - a window in the time we tried to issue an abort/close
+		 *   of a request to FW, and the FW completed the request
+		 *   itself.
+		 *   Print a message for now, and return INVAL either way.
+		 */
+		req->drv_status = -EINVAL;
+		csio_warn(hw, "Trying to abort/close completed IO:%p!\n", req);
+		break;
+
+	default:
+		csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+static void
+csio_scsis_io_active(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+	struct csio_rnode *rn;
+
+	switch (evt) {
+	case CSIO_SCSIE_COMPLETED:
+		CSIO_DEC_STATS(scm, n_active);
+		list_del_init(&req->sm.sm_list);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		/*
+		 * In MSIX mode, with multiple queues, the SCSI compeltions
+		 * could reach us sooner than the FW events sent to indicate
+		 * I-T nexus loss (link down, remote device logo etc). We
+		 * dont want to be returning such I/Os to the upper layer
+		 * immediately, since we wouldnt have reported the I-T nexus
+		 * loss itself. This forces us to serialize such completions
+		 * with the reporting of the I-T nexus loss. Therefore, we
+		 * internally queue up such up such completions in the rnode.
+		 * The reporting of I-T nexus loss to the upper layer is then
+		 * followed by the returning of I/Os in this internal queue.
+		 * Having another state alongwith another queue helps us take
+		 * actions for events such as ABORT received while we are
+		 * in this rnode queue.
+		 */
+		if (unlikely(req->wr_status != FW_SUCCESS)) {
+			rn = req->rnode;
+			/*
+			 * FW says remote device is lost, but rnode
+			 * doesnt reflect it.
+			 */
+			if (csio_scsi_itnexus_loss_error(req->wr_status) &&
+						csio_is_rnode_ready(rn)) {
+				csio_set_state(&req->sm,
+						csio_scsis_shost_cmpl_await);
+				list_add_tail(&req->sm.sm_list,
+					      &rn->host_cmpl_q);
+			}
+		}
+
+		break;
+
+	case CSIO_SCSIE_ABORT:
+		csio_scsi_abrt_cls(req, SCSI_ABORT);
+		if (req->drv_status == 0) {
+			csio_wr_issue(hw, req->eq_idx, false);
+			csio_set_state(&req->sm, csio_scsis_aborting);
+		}
+		break;
+
+	case CSIO_SCSIE_CLOSE:
+		csio_scsi_abrt_cls(req, SCSI_CLOSE);
+		if (req->drv_status == 0) {
+			csio_wr_issue(hw, req->eq_idx, false);
+			csio_set_state(&req->sm, csio_scsis_closing);
+		}
+		break;
+
+	case CSIO_SCSIE_DRVCLEANUP:
+		req->wr_status = FW_HOSTERROR;
+		CSIO_DEC_STATS(scm, n_active);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	default:
+		csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+static void
+csio_scsis_tm_active(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+
+	switch (evt) {
+	case CSIO_SCSIE_COMPLETED:
+		CSIO_DEC_STATS(scm, n_tm_active);
+		list_del_init(&req->sm.sm_list);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+
+		break;
+
+	case CSIO_SCSIE_ABORT:
+		csio_scsi_abrt_cls(req, SCSI_ABORT);
+		if (req->drv_status == 0) {
+			csio_wr_issue(hw, req->eq_idx, false);
+			csio_set_state(&req->sm, csio_scsis_aborting);
+		}
+		break;
+
+
+	case CSIO_SCSIE_CLOSE:
+		csio_scsi_abrt_cls(req, SCSI_CLOSE);
+		if (req->drv_status == 0) {
+			csio_wr_issue(hw, req->eq_idx, false);
+			csio_set_state(&req->sm, csio_scsis_closing);
+		}
+		break;
+
+	case CSIO_SCSIE_DRVCLEANUP:
+		req->wr_status = FW_HOSTERROR;
+		CSIO_DEC_STATS(scm, n_tm_active);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	default:
+		csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+static void
+csio_scsis_aborting(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+
+	switch (evt) {
+	case CSIO_SCSIE_COMPLETED:
+		csio_dbg(hw,
+			 "ioreq %p recvd cmpltd (wr_status:%d) "
+			 "in aborting st\n", req, req->wr_status);
+		/*
+		 * Use -ECANCELED to explicitly tell the ABORTED event that
+		 * the original I/O was returned to driver by FW.
+		 * We dont really care if the I/O was returned with success by
+		 * FW (because the ABORT and completion of the I/O crossed each
+		 * other), or any other return value. Once we are in aborting
+		 * state, the success or failure of the I/O is unimportant to
+		 * us.
+		 */
+		req->drv_status = -ECANCELED;
+		break;
+
+	case CSIO_SCSIE_ABORT:
+		CSIO_INC_STATS(scm, n_abrt_dups);
+		break;
+
+	case CSIO_SCSIE_ABORTED:
+
+		csio_dbg(hw, "abort of %p return status:0x%x drv_status:%x\n",
+			 req, req->wr_status, req->drv_status);
+		/*
+		 * Check if original I/O WR completed before the Abort
+		 * completion.
+		 */
+		if (req->drv_status != -ECANCELED) {
+			csio_warn(hw,
+				  "Abort completed before original I/O,"
+				   " req:%p\n", req);
+			CSIO_DB_ASSERT(0);
+		}
+
+		/*
+		 * There are the following possible scenarios:
+		 * 1. The abort completed successfully, FW returned FW_SUCCESS.
+		 * 2. The completion of an I/O and the receipt of
+		 *    abort for that I/O by the FW crossed each other.
+		 *    The FW returned FW_EINVAL. The original I/O would have
+		 *    returned with FW_SUCCESS or any other SCSI error.
+		 * 3. The FW couldnt sent the abort out on the wire, as there
+		 *    was an I-T nexus loss (link down, remote device logged
+		 *    out etc). FW sent back an appropriate IT nexus loss status
+		 *    for the abort.
+		 * 4. FW sent an abort, but abort timed out (remote device
+		 *    didnt respond). FW replied back with
+		 *    FW_SCSI_ABORT_TIMEDOUT.
+		 * 5. FW couldnt genuinely abort the request for some reason,
+		 *    and sent us an error.
+		 *
+		 * The first 3 scenarios are treated as  succesful abort
+		 * operations by the host, while the last 2 are failed attempts
+		 * to abort. Manipulate the return value of the request
+		 * appropriately, so that host can convey these results
+		 * back to the upper layer.
+		 */
+		if ((req->wr_status == FW_SUCCESS) ||
+		    (req->wr_status == FW_EINVAL) ||
+		    csio_scsi_itnexus_loss_error(req->wr_status))
+			req->wr_status = FW_SCSI_ABORT_REQUESTED;
+
+		CSIO_DEC_STATS(scm, n_active);
+		list_del_init(&req->sm.sm_list);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	case CSIO_SCSIE_DRVCLEANUP:
+		req->wr_status = FW_HOSTERROR;
+		CSIO_DEC_STATS(scm, n_active);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	case CSIO_SCSIE_CLOSE:
+		/*
+		 * We can receive this event from the module
+		 * cleanup paths, if the FW forgot to reply to the ABORT WR
+		 * and left this ioreq in this state. For now, just ignore
+		 * the event. The CLOSE event is sent to this state, as
+		 * the LINK may have already gone down.
+		 */
+		break;
+
+	default:
+		csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+static void
+csio_scsis_closing(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	struct csio_hw *hw = req->lnode->hwp;
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+
+	switch (evt) {
+	case CSIO_SCSIE_COMPLETED:
+		csio_dbg(hw,
+			 "ioreq %p recvd cmpltd (wr_status:%d) "
+			 "in closing st\n", req, req->wr_status);
+		/*
+		 * Use -ECANCELED to explicitly tell the CLOSED event that
+		 * the original I/O was returned to driver by FW.
+		 * We dont really care if the I/O was returned with success by
+		 * FW (because the CLOSE and completion of the I/O crossed each
+		 * other), or any other return value. Once we are in aborting
+		 * state, the success or failure of the I/O is unimportant to
+		 * us.
+		 */
+		req->drv_status = -ECANCELED;
+		break;
+
+	case CSIO_SCSIE_CLOSED:
+		/*
+		 * Check if original I/O WR completed before the Close
+		 * completion.
+		 */
+		if (req->drv_status != -ECANCELED) {
+			csio_fatal(hw,
+				   "Close completed before original I/O,"
+				   " req:%p\n", req);
+			CSIO_DB_ASSERT(0);
+		}
+
+		/*
+		 * Either close succeeded, or we issued close to FW at the
+		 * same time FW compelted it to us. Either way, the I/O
+		 * is closed.
+		 */
+		CSIO_DB_ASSERT((req->wr_status == FW_SUCCESS) ||
+					(req->wr_status == FW_EINVAL));
+		req->wr_status = FW_SCSI_CLOSE_REQUESTED;
+
+		CSIO_DEC_STATS(scm, n_active);
+		list_del_init(&req->sm.sm_list);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	case CSIO_SCSIE_CLOSE:
+		break;
+
+	case CSIO_SCSIE_DRVCLEANUP:
+		req->wr_status = FW_HOSTERROR;
+		CSIO_DEC_STATS(scm, n_active);
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+
+	default:
+		csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+static void
+csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt)
+{
+	switch (evt) {
+	case CSIO_SCSIE_ABORT:
+	case CSIO_SCSIE_CLOSE:
+		/*
+		 * Just succeed the abort request, and hope that
+		 * the remote device unregister path will cleanup
+		 * this I/O to the upper layer within a sane
+		 * amount of time.
+		 */
+		/*
+		 * A close can come in during a LINK DOWN. The FW would have
+		 * returned us the I/O back, but not the remote device lost
+		 * FW event. In this interval, if the I/O times out at the upper
+		 * layer, a close can come in. Take the same action as abort:
+		 * return success, and hope that the remote device unregister
+		 * path will cleanup this I/O. If the FW still doesnt send
+		 * the msg, the close times out, and the upper layer resorts
+		 * to the next level of error recovery.
+		 */
+		req->drv_status = 0;
+		break;
+	case CSIO_SCSIE_DRVCLEANUP:
+		csio_set_state(&req->sm, csio_scsis_uninit);
+		break;
+	default:
+		csio_dbg(req->lnode->hwp, "Unhandled event:%d sent to req:%p\n",
+			 evt, req);
+		CSIO_DB_ASSERT(0);
+	}
+}
+
+/*
+ * csio_scsi_cmpl_handler - WR completion handler for SCSI.
+ * @hw: HW module.
+ * @wr: The completed WR from the ingress queue.
+ * @len: Length of the WR.
+ * @flb: Freelist buffer array.
+ * @priv: Private object
+ * @scsiwr: Pointer to SCSI WR.
+ *
+ * This is the WR completion handler called per completion from the
+ * ISR. It is called with lock held. It walks past the RSS and CPL message
+ * header where the actual WR is present.
+ * It then gets the status, WR handle (ioreq pointer) and the len of
+ * the WR, based on WR opcode. Only on a non-good status is the entire
+ * WR copied into the WR cache (ioreq->fw_wr).
+ * The ioreq corresponding to the WR is returned to the caller.
+ * NOTE: The SCSI queue doesnt allocate a freelist today, hence
+ * no freelist buffer is expected.
+ */
+struct csio_ioreq *
+csio_scsi_cmpl_handler(struct csio_hw *hw, void *wr, uint32_t len,
+		     struct csio_fl_dma_buf *flb, void *priv, uint8_t **scsiwr)
+{
+	struct csio_ioreq *ioreq = NULL;
+	struct cpl_fw6_msg *cpl;
+	uint8_t *tempwr;
+	uint8_t	status;
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+
+	/* skip RSS header */
+	cpl = (struct cpl_fw6_msg *)((uintptr_t)wr + sizeof(__be64));
+
+	if (unlikely(cpl->opcode != CPL_FW6_MSG)) {
+		csio_warn(hw, "Error: Invalid CPL msg %x recvd on SCSI q\n",
+			  cpl->opcode);
+		CSIO_INC_STATS(scm, n_inval_cplop);
+		return NULL;
+	}
+
+	tempwr = (uint8_t *)(cpl->data);
+	status = csio_wr_status(tempwr);
+	*scsiwr = tempwr;
+
+	if (likely((*tempwr == FW_SCSI_READ_WR) ||
+			(*tempwr == FW_SCSI_WRITE_WR) ||
+			(*tempwr == FW_SCSI_CMD_WR))) {
+		ioreq = (struct csio_ioreq *)((uintptr_t)
+				 (((struct fw_scsi_read_wr *)tempwr)->cookie));
+		CSIO_DB_ASSERT(virt_addr_valid(ioreq));
+
+		ioreq->wr_status = status;
+
+		return ioreq;
+	}
+
+	if (*tempwr == FW_SCSI_ABRT_CLS_WR) {
+		ioreq = (struct csio_ioreq *)((uintptr_t)
+			 (((struct fw_scsi_abrt_cls_wr *)tempwr)->cookie));
+		CSIO_DB_ASSERT(virt_addr_valid(ioreq));
+
+		ioreq->wr_status = status;
+		return ioreq;
+	}
+
+	csio_warn(hw, "WR with invalid opcode in SCSI IQ: %x\n", *tempwr);
+	CSIO_INC_STATS(scm, n_inval_scsiop);
+	return NULL;
+}
+
+/*
+ * csio_scsi_cleanup_io_q - Cleanup the given queue.
+ * @scm: SCSI module.
+ * @q: Queue to be cleaned up.
+ *
+ * Called with lock held. Has to exit with lock held.
+ */
+void
+csio_scsi_cleanup_io_q(struct csio_scsim *scm, struct list_head *q)
+{
+	struct csio_hw *hw = scm->hw;
+	struct csio_ioreq *ioreq;
+	struct list_head *tmp, *next;
+	struct scsi_cmnd *scmnd;
+
+	/* Call back the completion routines of the active_q */
+	list_for_each_safe(tmp, next, q) {
+		ioreq = (struct csio_ioreq *)tmp;
+		csio_scsi_drvcleanup(ioreq);
+		list_del_init(&ioreq->sm.sm_list);
+		scmnd = csio_scsi_cmnd(ioreq);
+		spin_unlock_irq(&hw->lock);
+
+		/*
+		 * Upper layers may have cleared this command, hence this
+		 * check to avoid accessing stale references.
+		 */
+		if (scmnd != NULL)
+			ioreq->io_cbfn(hw, ioreq);
+
+		spin_lock_irq(&scm->freelist_lock);
+		csio_put_scsi_ioreq(scm, ioreq);
+		spin_unlock_irq(&scm->freelist_lock);
+
+		spin_lock_irq(&hw->lock);
+	}
+}
+
+#define CSIO_SCSI_ABORT_Q_POLL_MS		2000
+
+static void
+csio_abrt_cls(struct csio_ioreq *ioreq, struct scsi_cmnd *scmnd)
+{
+	struct csio_lnode *ln = ioreq->lnode;
+	struct csio_hw *hw = ln->hwp;
+	int ready = 0;
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+	int rv;
+
+	if (csio_scsi_cmnd(ioreq) != scmnd) {
+		CSIO_INC_STATS(scsim, n_abrt_race_comp);
+		return;
+	}
+
+	ready = csio_is_lnode_ready(ln);
+
+	rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE));
+	if (rv != 0) {
+		if (ready)
+			CSIO_INC_STATS(scsim, n_abrt_busy_error);
+		else
+			CSIO_INC_STATS(scsim, n_cls_busy_error);
+	}
+}
+
+/*
+ * csio_scsi_abort_io_q - Abort all I/Os on given queue
+ * @scm: SCSI module.
+ * @q: Queue to abort.
+ * @tmo: Timeout in ms
+ *
+ * Attempt to abort all I/Os on given queue, and wait for a max
+ * of tmo milliseconds for them to complete. Returns success
+ * if all I/Os are aborted. Else returns -ETIMEDOUT.
+ * Should be entered with lock held. Exits with lock held.
+ * NOTE:
+ * Lock has to be held across the loop that aborts I/Os, since dropping the lock
+ * in between can cause the list to be corrupted. As a result, the caller
+ * of this function has to ensure that the number of I/os to be aborted
+ * is finite enough to not cause lock-held-for-too-long issues.
+ */
+static int
+csio_scsi_abort_io_q(struct csio_scsim *scm, struct list_head *q, uint32_t tmo)
+{
+	struct csio_hw *hw = scm->hw;
+	struct list_head *tmp, *next;
+	int count = DIV_ROUND_UP(tmo, CSIO_SCSI_ABORT_Q_POLL_MS);
+	struct scsi_cmnd *scmnd;
+
+	if (list_empty(q))
+		return 0;
+
+	csio_dbg(hw, "Aborting SCSI I/Os\n");
+
+	/* Now abort/close I/Os in the queue passed */
+	list_for_each_safe(tmp, next, q) {
+		scmnd = csio_scsi_cmnd((struct csio_ioreq *)tmp);
+		csio_abrt_cls((struct csio_ioreq *)tmp, scmnd);
+	}
+
+	/* Wait till all active I/Os are completed/aborted/closed */
+	while (!list_empty(q) && count--) {
+		spin_unlock_irq(&hw->lock);
+		msleep(CSIO_SCSI_ABORT_Q_POLL_MS);
+		spin_lock_irq(&hw->lock);
+	}
+
+	/* all aborts completed */
+	if (list_empty(q))
+		return 0;
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * csio_scsim_cleanup_io - Cleanup all I/Os in SCSI module.
+ * @scm: SCSI module.
+ * @abort: abort required.
+ * Called with lock held, should exit with lock held.
+ * Can sleep when waiting for I/Os to complete.
+ */
+int
+csio_scsim_cleanup_io(struct csio_scsim *scm, bool abort)
+{
+	struct csio_hw *hw = scm->hw;
+	int rv = 0;
+	int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS);
+
+	/* No I/Os pending */
+	if (list_empty(&scm->active_q))
+		return 0;
+
+	/* Wait until all active I/Os are completed */
+	while (!list_empty(&scm->active_q) && count--) {
+		spin_unlock_irq(&hw->lock);
+		msleep(CSIO_SCSI_ABORT_Q_POLL_MS);
+		spin_lock_irq(&hw->lock);
+	}
+
+	/* all I/Os completed */
+	if (list_empty(&scm->active_q))
+		return 0;
+
+	/* Else abort */
+	if (abort) {
+		rv = csio_scsi_abort_io_q(scm, &scm->active_q, 30000);
+		if (rv == 0)
+			return rv;
+		csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n");
+	}
+
+	csio_scsi_cleanup_io_q(scm, &scm->active_q);
+
+	CSIO_DB_ASSERT(list_empty(&scm->active_q));
+
+	return rv;
+}
+
+/*
+ * csio_scsim_cleanup_io_lnode - Cleanup all I/Os of given lnode.
+ * @scm: SCSI module.
+ * @lnode: lnode
+ *
+ * Called with lock held, should exit with lock held.
+ * Can sleep (with dropped lock) when waiting for I/Os to complete.
+ */
+int
+csio_scsim_cleanup_io_lnode(struct csio_scsim *scm, struct csio_lnode *ln)
+{
+	struct csio_hw *hw = scm->hw;
+	struct csio_scsi_level_data sld;
+	int rv;
+	int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS);
+
+	csio_dbg(hw, "Gathering all SCSI I/Os on lnode %p\n", ln);
+
+	sld.level = CSIO_LEV_LNODE;
+	sld.lnode = ln;
+	INIT_LIST_HEAD(&ln->cmpl_q);
+	csio_scsi_gather_active_ios(scm, &sld, &ln->cmpl_q);
+
+	/* No I/Os pending on this lnode  */
+	if (list_empty(&ln->cmpl_q))
+		return 0;
+
+	/* Wait until all active I/Os on this lnode are completed */
+	while (!list_empty(&ln->cmpl_q) && count--) {
+		spin_unlock_irq(&hw->lock);
+		msleep(CSIO_SCSI_ABORT_Q_POLL_MS);
+		spin_lock_irq(&hw->lock);
+	}
+
+	/* all I/Os completed */
+	if (list_empty(&ln->cmpl_q))
+		return 0;
+
+	csio_dbg(hw, "Some I/Os pending on ln:%p, aborting them..\n", ln);
+
+	/* I/Os are pending, abort them */
+	rv = csio_scsi_abort_io_q(scm, &ln->cmpl_q, 30000);
+	if (rv != 0) {
+		csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n");
+		csio_scsi_cleanup_io_q(scm, &ln->cmpl_q);
+	}
+
+	CSIO_DB_ASSERT(list_empty(&ln->cmpl_q));
+
+	return rv;
+}
+
+static ssize_t
+csio_show_hw_state(struct device *dev,
+		   struct device_attribute *attr, char *buf)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	if (csio_is_hw_ready(hw))
+		return snprintf(buf, PAGE_SIZE, "ready\n");
+	else
+		return snprintf(buf, PAGE_SIZE, "not ready\n");
+}
+
+/* Device reset */
+static ssize_t
+csio_device_reset(struct device *dev,
+		   struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+
+	if (*buf != '1')
+		return -EINVAL;
+
+	/* Delete NPIV lnodes */
+	 csio_lnodes_exit(hw, 1);
+
+	/* Block upper IOs */
+	csio_lnodes_block_request(hw);
+
+	spin_lock_irq(&hw->lock);
+	csio_hw_reset(hw);
+	spin_unlock_irq(&hw->lock);
+
+	/* Unblock upper IOs */
+	csio_lnodes_unblock_request(hw);
+	return count;
+}
+
+/* disable port */
+static ssize_t
+csio_disable_port(struct device *dev,
+		   struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	bool disable;
+
+	if (*buf == '1' || *buf == '0')
+		disable = (*buf == '1') ? true : false;
+	else
+		return -EINVAL;
+
+	/* Block upper IOs */
+	csio_lnodes_block_by_port(hw, ln->portid);
+
+	spin_lock_irq(&hw->lock);
+	csio_disable_lnodes(hw, ln->portid, disable);
+	spin_unlock_irq(&hw->lock);
+
+	/* Unblock upper IOs */
+	csio_lnodes_unblock_by_port(hw, ln->portid);
+	return count;
+}
+
+/* Show debug level */
+static ssize_t
+csio_show_dbg_level(struct device *dev,
+		   struct device_attribute *attr, char *buf)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%x\n", ln->params.log_level);
+}
+
+/* Store debug level */
+static ssize_t
+csio_store_dbg_level(struct device *dev,
+		   struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	uint32_t dbg_level = 0;
+
+	if (!isdigit(buf[0]))
+		return -EINVAL;
+
+	if (sscanf(buf, "%i", &dbg_level))
+		return -EINVAL;
+
+	ln->params.log_level = dbg_level;
+	hw->params.log_level = dbg_level;
+
+	return 0;
+}
+
+static DEVICE_ATTR(hw_state, S_IRUGO, csio_show_hw_state, NULL);
+static DEVICE_ATTR(device_reset, S_IRUGO | S_IWUSR, NULL, csio_device_reset);
+static DEVICE_ATTR(disable_port, S_IRUGO | S_IWUSR, NULL, csio_disable_port);
+static DEVICE_ATTR(dbg_level, S_IRUGO | S_IWUSR, csio_show_dbg_level,
+		  csio_store_dbg_level);
+
+static struct device_attribute *csio_fcoe_lport_attrs[] = {
+	&dev_attr_hw_state,
+	&dev_attr_device_reset,
+	&dev_attr_disable_port,
+	&dev_attr_dbg_level,
+	NULL,
+};
+
+static ssize_t
+csio_show_num_reg_rnodes(struct device *dev,
+		     struct device_attribute *attr, char *buf)
+{
+	struct csio_lnode *ln = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ln->num_reg_rnodes);
+}
+
+static DEVICE_ATTR(num_reg_rnodes, S_IRUGO, csio_show_num_reg_rnodes, NULL);
+
+static struct device_attribute *csio_fcoe_vport_attrs[] = {
+	&dev_attr_num_reg_rnodes,
+	&dev_attr_dbg_level,
+	NULL,
+};
+
+static inline uint32_t
+csio_scsi_copy_to_sgl(struct csio_hw *hw, struct csio_ioreq *req)
+{
+	struct scsi_cmnd *scmnd  = (struct scsi_cmnd *)csio_scsi_cmnd(req);
+	struct scatterlist *sg;
+	uint32_t bytes_left;
+	uint32_t bytes_copy;
+	uint32_t buf_off = 0;
+	uint32_t start_off = 0;
+	uint32_t sg_off = 0;
+	void *sg_addr;
+	void *buf_addr;
+	struct csio_dma_buf *dma_buf;
+
+	bytes_left = scsi_bufflen(scmnd);
+	sg = scsi_sglist(scmnd);
+	dma_buf = (struct csio_dma_buf *)csio_list_next(&req->gen_list);
+
+	/* Copy data from driver buffer to SGs of SCSI CMD */
+	while (bytes_left > 0 && sg && dma_buf) {
+		if (buf_off >= dma_buf->len) {
+			buf_off = 0;
+			dma_buf = (struct csio_dma_buf *)
+					csio_list_next(dma_buf);
+			continue;
+		}
+
+		if (start_off >= sg->length) {
+			start_off -= sg->length;
+			sg = sg_next(sg);
+			continue;
+		}
+
+		buf_addr = dma_buf->vaddr + buf_off;
+		sg_off = sg->offset + start_off;
+		bytes_copy = min((dma_buf->len - buf_off),
+				sg->length - start_off);
+		bytes_copy = min((uint32_t)(PAGE_SIZE - (sg_off & ~PAGE_MASK)),
+				 bytes_copy);
+
+		sg_addr = kmap_atomic(sg_page(sg) + (sg_off >> PAGE_SHIFT));
+		if (!sg_addr) {
+			csio_err(hw, "failed to kmap sg:%p of ioreq:%p\n",
+				sg, req);
+			break;
+		}
+
+		csio_dbg(hw, "copy_to_sgl:sg_addr %p sg_off %d buf %p len %d\n",
+				sg_addr, sg_off, buf_addr, bytes_copy);
+		memcpy(sg_addr + (sg_off & ~PAGE_MASK), buf_addr, bytes_copy);
+		kunmap_atomic(sg_addr);
+
+		start_off +=  bytes_copy;
+		buf_off += bytes_copy;
+		bytes_left -= bytes_copy;
+	}
+
+	if (bytes_left > 0)
+		return DID_ERROR;
+	else
+		return DID_OK;
+}
+
+/*
+ * csio_scsi_err_handler - SCSI error handler.
+ * @hw: HW module.
+ * @req: IO request.
+ *
+ */
+static inline void
+csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req)
+{
+	struct scsi_cmnd *cmnd  = (struct scsi_cmnd *)csio_scsi_cmnd(req);
+	struct csio_scsim *scm = csio_hw_to_scsim(hw);
+	struct fcp_resp_with_ext *fcp_resp;
+	struct fcp_resp_rsp_info *rsp_info;
+	struct csio_dma_buf *dma_buf;
+	uint8_t flags, scsi_status = 0;
+	uint32_t host_status = DID_OK;
+	uint32_t rsp_len = 0, sns_len = 0;
+	struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
+
+
+	switch (req->wr_status) {
+	case FW_HOSTERROR:
+		if (unlikely(!csio_is_hw_ready(hw)))
+			return;
+
+		host_status = DID_ERROR;
+		CSIO_INC_STATS(scm, n_hosterror);
+
+		break;
+	case FW_SCSI_RSP_ERR:
+		dma_buf = &req->dma_buf;
+		fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr;
+		rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1);
+		flags = fcp_resp->resp.fr_flags;
+		scsi_status = fcp_resp->resp.fr_status;
+
+		if (flags & FCP_RSP_LEN_VAL) {
+			rsp_len = be32_to_cpu(fcp_resp->ext.fr_rsp_len);
+			if ((rsp_len != 0 && rsp_len != 4 && rsp_len != 8) ||
+				(rsp_info->rsp_code != FCP_TMF_CMPL)) {
+				host_status = DID_ERROR;
+				goto out;
+			}
+		}
+
+		if ((flags & FCP_SNS_LEN_VAL) && fcp_resp->ext.fr_sns_len) {
+			sns_len = be32_to_cpu(fcp_resp->ext.fr_sns_len);
+			if (sns_len > SCSI_SENSE_BUFFERSIZE)
+				sns_len = SCSI_SENSE_BUFFERSIZE;
+
+			memcpy(cmnd->sense_buffer,
+			       &rsp_info->_fr_resvd[0] + rsp_len, sns_len);
+			CSIO_INC_STATS(scm, n_autosense);
+		}
+
+		scsi_set_resid(cmnd, 0);
+
+		/* Under run */
+		if (flags & FCP_RESID_UNDER) {
+			scsi_set_resid(cmnd,
+				       be32_to_cpu(fcp_resp->ext.fr_resid));
+
+			if (!(flags & FCP_SNS_LEN_VAL) &&
+			    (scsi_status == SAM_STAT_GOOD) &&
+			    ((scsi_bufflen(cmnd) - scsi_get_resid(cmnd))
+							< cmnd->underflow))
+				host_status = DID_ERROR;
+		} else if (flags & FCP_RESID_OVER)
+			host_status = DID_ERROR;
+
+		CSIO_INC_STATS(scm, n_rsperror);
+		break;
+
+	case FW_SCSI_OVER_FLOW_ERR:
+		csio_warn(hw,
+			  "Over-flow error,cmnd:0x%x expected len:0x%x"
+			  " resid:0x%x\n", cmnd->cmnd[0],
+			  scsi_bufflen(cmnd), scsi_get_resid(cmnd));
+		host_status = DID_ERROR;
+		CSIO_INC_STATS(scm, n_ovflerror);
+		break;
+
+	case FW_SCSI_UNDER_FLOW_ERR:
+		csio_warn(hw,
+			  "Under-flow error,cmnd:0x%x expected"
+			  " len:0x%x resid:0x%x lun:0x%x ssn:0x%x\n",
+			  cmnd->cmnd[0], scsi_bufflen(cmnd),
+			  scsi_get_resid(cmnd), cmnd->device->lun,
+			  rn->flowid);
+		host_status = DID_ERROR;
+		CSIO_INC_STATS(scm, n_unflerror);
+		break;
+
+	case FW_SCSI_ABORT_REQUESTED:
+	case FW_SCSI_ABORTED:
+	case FW_SCSI_CLOSE_REQUESTED:
+		csio_dbg(hw, "Req %p cmd:%p op:%x %s\n", req, cmnd,
+			     cmnd->cmnd[0],
+			    (req->wr_status == FW_SCSI_CLOSE_REQUESTED) ?
+			    "closed" : "aborted");
+		/*
+		 * csio_eh_abort_handler checks this value to
+		 * succeed or fail the abort request.
+		 */
+		host_status = DID_REQUEUE;
+		if (req->wr_status == FW_SCSI_CLOSE_REQUESTED)
+			CSIO_INC_STATS(scm, n_closed);
+		else
+			CSIO_INC_STATS(scm, n_aborted);
+		break;
+
+	case FW_SCSI_ABORT_TIMEDOUT:
+		/* FW timed out the abort itself */
+		csio_dbg(hw, "FW timed out abort req:%p cmnd:%p status:%x\n",
+			 req, cmnd, req->wr_status);
+		host_status = DID_ERROR;
+		CSIO_INC_STATS(scm, n_abrt_timedout);
+		break;
+
+	case FW_RDEV_NOT_READY:
+		/*
+		 * In firmware, a RDEV can get into this state
+		 * temporarily, before moving into dissapeared/lost
+		 * state. So, the driver should complete the request equivalent
+		 * to device-disappeared!
+		 */
+		CSIO_INC_STATS(scm, n_rdev_nr_error);
+		host_status = DID_ERROR;
+		break;
+
+	case FW_ERR_RDEV_LOST:
+		CSIO_INC_STATS(scm, n_rdev_lost_error);
+		host_status = DID_ERROR;
+		break;
+
+	case FW_ERR_RDEV_LOGO:
+		CSIO_INC_STATS(scm, n_rdev_logo_error);
+		host_status = DID_ERROR;
+		break;
+
+	case FW_ERR_RDEV_IMPL_LOGO:
+		host_status = DID_ERROR;
+		break;
+
+	case FW_ERR_LINK_DOWN:
+		CSIO_INC_STATS(scm, n_link_down_error);
+		host_status = DID_ERROR;
+		break;
+
+	case FW_FCOE_NO_XCHG:
+		CSIO_INC_STATS(scm, n_no_xchg_error);
+		host_status = DID_ERROR;
+		break;
+
+	default:
+		csio_err(hw, "Unknown SCSI FW WR status:%d req:%p cmnd:%p\n",
+			    req->wr_status, req, cmnd);
+		CSIO_DB_ASSERT(0);
+
+		CSIO_INC_STATS(scm, n_unknown_error);
+		host_status = DID_ERROR;
+		break;
+	}
+
+out:
+	if (req->nsge > 0)
+		scsi_dma_unmap(cmnd);
+
+	cmnd->result = (((host_status) << 16) | scsi_status);
+	cmnd->scsi_done(cmnd);
+
+	/* Wake up waiting threads */
+	csio_scsi_cmnd(req) = NULL;
+	complete_all(&req->cmplobj);
+}
+
+/*
+ * csio_scsi_cbfn - SCSI callback function.
+ * @hw: HW module.
+ * @req: IO request.
+ *
+ */
+static void
+csio_scsi_cbfn(struct csio_hw *hw, struct csio_ioreq *req)
+{
+	struct scsi_cmnd *cmnd  = (struct scsi_cmnd *)csio_scsi_cmnd(req);
+	uint8_t scsi_status = SAM_STAT_GOOD;
+	uint32_t host_status = DID_OK;
+
+	if (likely(req->wr_status == FW_SUCCESS)) {
+		if (req->nsge > 0) {
+			scsi_dma_unmap(cmnd);
+			if (req->dcopy)
+				host_status = csio_scsi_copy_to_sgl(hw, req);
+		}
+
+		cmnd->result = (((host_status) << 16) | scsi_status);
+		cmnd->scsi_done(cmnd);
+		csio_scsi_cmnd(req) = NULL;
+		CSIO_INC_STATS(csio_hw_to_scsim(hw), n_tot_success);
+	} else {
+		/* Error handling */
+		csio_scsi_err_handler(hw, req);
+	}
+}
+
+/**
+ * csio_queuecommand - Entry point to kickstart an I/O request.
+ * @host:	The scsi_host pointer.
+ * @cmnd:	The I/O request from ML.
+ *
+ * This routine does the following:
+ *	- Checks for HW and Rnode module readiness.
+ *	- Gets a free ioreq structure (which is already initialized
+ *	  to uninit during its allocation).
+ *	- Maps SG elements.
+ *	- Initializes ioreq members.
+ *	- Kicks off the SCSI state machine for this IO.
+ *	- Returns busy status on error.
+ */
+static int
+csio_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmnd)
+{
+	struct csio_lnode *ln = shost_priv(host);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+	struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
+	struct csio_ioreq *ioreq = NULL;
+	unsigned long flags;
+	int nsge = 0;
+	int rv = SCSI_MLQUEUE_HOST_BUSY, nr;
+	int retval;
+	int cpu;
+	struct csio_scsi_qset *sqset;
+	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+	if (!blk_rq_cpu_valid(cmnd->request))
+		cpu = smp_processor_id();
+	else
+		cpu = cmnd->request->cpu;
+
+	sqset = &hw->sqset[ln->portid][cpu];
+
+	nr = fc_remote_port_chkready(rport);
+	if (nr) {
+		cmnd->result = nr;
+		CSIO_INC_STATS(scsim, n_rn_nr_error);
+		goto err_done;
+	}
+
+	if (unlikely(!csio_is_hw_ready(hw))) {
+		cmnd->result = (DID_REQUEUE << 16);
+		CSIO_INC_STATS(scsim, n_hw_nr_error);
+		goto err_done;
+	}
+
+	/* Get req->nsge, if there are SG elements to be mapped  */
+	nsge = scsi_dma_map(cmnd);
+	if (unlikely(nsge < 0)) {
+		CSIO_INC_STATS(scsim, n_dmamap_error);
+		goto err;
+	}
+
+	/* Do we support so many mappings? */
+	if (unlikely(nsge > scsim->max_sge)) {
+		csio_warn(hw,
+			  "More SGEs than can be supported."
+			  " SGEs: %d, Max SGEs: %d\n", nsge, scsim->max_sge);
+		CSIO_INC_STATS(scsim, n_unsupp_sge_error);
+		goto err_dma_unmap;
+	}
+
+	/* Get a free ioreq structure - SM is already set to uninit */
+	ioreq = csio_get_scsi_ioreq_lock(hw, scsim);
+	if (!ioreq) {
+		csio_err(hw, "Out of I/O request elements. Active #:%d\n",
+			 scsim->stats.n_active);
+		CSIO_INC_STATS(scsim, n_no_req_error);
+		goto err_dma_unmap;
+	}
+
+	ioreq->nsge		= nsge;
+	ioreq->lnode		= ln;
+	ioreq->rnode		= rn;
+	ioreq->iq_idx		= sqset->iq_idx;
+	ioreq->eq_idx		= sqset->eq_idx;
+	ioreq->wr_status	= 0;
+	ioreq->drv_status	= 0;
+	csio_scsi_cmnd(ioreq)	= (void *)cmnd;
+	ioreq->tmo		= 0;
+	ioreq->datadir		= cmnd->sc_data_direction;
+
+	if (cmnd->sc_data_direction == DMA_TO_DEVICE) {
+		CSIO_INC_STATS(ln, n_output_requests);
+		ln->stats.n_output_bytes += scsi_bufflen(cmnd);
+	} else if (cmnd->sc_data_direction == DMA_FROM_DEVICE) {
+		CSIO_INC_STATS(ln, n_input_requests);
+		ln->stats.n_input_bytes += scsi_bufflen(cmnd);
+	} else
+		CSIO_INC_STATS(ln, n_control_requests);
+
+	/* Set cbfn */
+	ioreq->io_cbfn = csio_scsi_cbfn;
+
+	/* Needed during abort */
+	cmnd->host_scribble = (unsigned char *)ioreq;
+	cmnd->SCp.Message = 0;
+
+	/* Kick off SCSI IO SM on the ioreq */
+	spin_lock_irqsave(&hw->lock, flags);
+	retval = csio_scsi_start_io(ioreq);
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	if (retval != 0) {
+		csio_err(hw, "ioreq: %p couldnt be started, status:%d\n",
+			 ioreq, retval);
+		CSIO_INC_STATS(scsim, n_busy_error);
+		goto err_put_req;
+	}
+
+	return 0;
+
+err_put_req:
+	csio_put_scsi_ioreq_lock(hw, scsim, ioreq);
+err_dma_unmap:
+	if (nsge > 0)
+		scsi_dma_unmap(cmnd);
+err:
+	return rv;
+
+err_done:
+	cmnd->scsi_done(cmnd);
+	return 0;
+}
+
+static int
+csio_do_abrt_cls(struct csio_hw *hw, struct csio_ioreq *ioreq, bool abort)
+{
+	int rv;
+	int cpu = smp_processor_id();
+	struct csio_lnode *ln = ioreq->lnode;
+	struct csio_scsi_qset *sqset = &hw->sqset[ln->portid][cpu];
+
+	ioreq->tmo = CSIO_SCSI_ABRT_TMO_MS;
+	/*
+	 * Use current processor queue for posting the abort/close, but retain
+	 * the ingress queue ID of the original I/O being aborted/closed - we
+	 * need the abort/close completion to be received on the same queue
+	 * as the original I/O.
+	 */
+	ioreq->eq_idx = sqset->eq_idx;
+
+	if (abort == SCSI_ABORT)
+		rv = csio_scsi_abort(ioreq);
+	else
+		rv = csio_scsi_close(ioreq);
+
+	return rv;
+}
+
+static int
+csio_eh_abort_handler(struct scsi_cmnd *cmnd)
+{
+	struct csio_ioreq *ioreq;
+	struct csio_lnode *ln = shost_priv(cmnd->device->host);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+	int ready = 0, ret;
+	unsigned long tmo = 0;
+	int rv;
+	struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
+
+	ret = fc_block_scsi_eh(cmnd);
+	if (ret)
+		return ret;
+
+	ioreq = (struct csio_ioreq *)cmnd->host_scribble;
+	if (!ioreq)
+		return SUCCESS;
+
+	if (!rn)
+		return FAILED;
+
+	csio_dbg(hw,
+		 "Request to abort ioreq:%p cmd:%p cdb:%08llx"
+		 " ssni:0x%x lun:%d iq:0x%x\n",
+		ioreq, cmnd, *((uint64_t *)cmnd->cmnd), rn->flowid,
+		cmnd->device->lun, csio_q_physiqid(hw, ioreq->iq_idx));
+
+	if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) != cmnd) {
+		CSIO_INC_STATS(scsim, n_abrt_race_comp);
+		return SUCCESS;
+	}
+
+	ready = csio_is_lnode_ready(ln);
+	tmo = CSIO_SCSI_ABRT_TMO_MS;
+
+	spin_lock_irq(&hw->lock);
+	rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE));
+	spin_unlock_irq(&hw->lock);
+
+	if (rv != 0) {
+		if (rv == -EINVAL) {
+			/* Return success, if abort/close request issued on
+			 * already completed IO
+			 */
+			return SUCCESS;
+		}
+		if (ready)
+			CSIO_INC_STATS(scsim, n_abrt_busy_error);
+		else
+			CSIO_INC_STATS(scsim, n_cls_busy_error);
+
+		goto inval_scmnd;
+	}
+
+	/* Wait for completion */
+	init_completion(&ioreq->cmplobj);
+	wait_for_completion_timeout(&ioreq->cmplobj, msecs_to_jiffies(tmo));
+
+	/* FW didnt respond to abort within our timeout */
+	if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) {
+
+		csio_err(hw, "Abort timed out -- req: %p\n", ioreq);
+		CSIO_INC_STATS(scsim, n_abrt_timedout);
+
+inval_scmnd:
+		if (ioreq->nsge > 0)
+			scsi_dma_unmap(cmnd);
+
+		spin_lock_irq(&hw->lock);
+		csio_scsi_cmnd(ioreq) = NULL;
+		spin_unlock_irq(&hw->lock);
+
+		cmnd->result = (DID_ERROR << 16);
+		cmnd->scsi_done(cmnd);
+
+		return FAILED;
+	}
+
+	/* FW successfully aborted the request */
+	if (host_byte(cmnd->result) == DID_REQUEUE) {
+		csio_info(hw,
+			"Aborted SCSI command to (%d:%d) serial#:0x%lx\n",
+			cmnd->device->id, cmnd->device->lun,
+			cmnd->serial_number);
+		return SUCCESS;
+	} else {
+		csio_info(hw,
+			"Failed to abort SCSI command, (%d:%d) serial#:0x%lx\n",
+			cmnd->device->id, cmnd->device->lun,
+			cmnd->serial_number);
+		return FAILED;
+	}
+}
+
+/*
+ * csio_tm_cbfn - TM callback function.
+ * @hw: HW module.
+ * @req: IO request.
+ *
+ * Cache the result in 'cmnd', since ioreq will be freed soon
+ * after we return from here, and the waiting thread shouldnt trust
+ * the ioreq contents.
+ */
+static void
+csio_tm_cbfn(struct csio_hw *hw, struct csio_ioreq *req)
+{
+	struct scsi_cmnd *cmnd  = (struct scsi_cmnd *)csio_scsi_cmnd(req);
+	struct csio_dma_buf *dma_buf;
+	uint8_t flags = 0;
+	struct fcp_resp_with_ext *fcp_resp;
+	struct fcp_resp_rsp_info *rsp_info;
+
+	csio_dbg(hw, "req: %p in csio_tm_cbfn status: %d\n",
+		      req, req->wr_status);
+
+	/* Cache FW return status */
+	cmnd->SCp.Status = req->wr_status;
+
+	/* Special handling based on FCP response */
+
+	/*
+	 * FW returns us this error, if flags were set. FCP4 says
+	 * FCP_RSP_LEN_VAL in flags shall be set for TM completions.
+	 * So if a target were to set this bit, we expect that the
+	 * rsp_code is set to FCP_TMF_CMPL for a successful TM
+	 * completion. Any other rsp_code means TM operation failed.
+	 * If a target were to just ignore setting flags, we treat
+	 * the TM operation as success, and FW returns FW_SUCCESS.
+	 */
+	if (req->wr_status == FW_SCSI_RSP_ERR) {
+		dma_buf = &req->dma_buf;
+		fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr;
+		rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1);
+
+		flags = fcp_resp->resp.fr_flags;
+
+		/* Modify return status if flags indicate success */
+		if (flags & FCP_RSP_LEN_VAL)
+			if (rsp_info->rsp_code == FCP_TMF_CMPL)
+				cmnd->SCp.Status = FW_SUCCESS;
+
+		csio_dbg(hw, "TM FCP rsp code: %d\n", rsp_info->rsp_code);
+	}
+
+	/* Wake up the TM handler thread */
+	csio_scsi_cmnd(req) = NULL;
+}
+
+static int
+csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct csio_lnode *ln = shost_priv(cmnd->device->host);
+	struct csio_hw *hw = csio_lnode_to_hw(ln);
+	struct csio_scsim *scsim = csio_hw_to_scsim(hw);
+	struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata);
+	struct csio_ioreq *ioreq = NULL;
+	struct csio_scsi_qset *sqset;
+	unsigned long flags;
+	int retval;
+	int count, ret;
+	LIST_HEAD(local_q);
+	struct csio_scsi_level_data sld;
+
+	if (!rn)
+		goto fail;
+
+	csio_dbg(hw, "Request to reset LUN:%d (ssni:0x%x tgtid:%d)\n",
+		      cmnd->device->lun, rn->flowid, rn->scsi_id);
+
+	if (!csio_is_lnode_ready(ln)) {
+		csio_err(hw,
+			 "LUN reset cannot be issued on non-ready"
+			 " local node vnpi:0x%x (LUN:%d)\n",
+			 ln->vnp_flowid, cmnd->device->lun);
+		goto fail;
+	}
+
+	/* Lnode is ready, now wait on rport node readiness */
+	ret = fc_block_scsi_eh(cmnd);
+	if (ret)
+		return ret;
+
+	/*
+	 * If we have blocked in the previous call, at this point, either the
+	 * remote node has come back online, or device loss timer has fired
+	 * and the remote node is destroyed. Allow the LUN reset only for
+	 * the former case, since LUN reset is a TMF I/O on the wire, and we
+	 * need a valid session to issue it.
+	 */
+	if (fc_remote_port_chkready(rn->rport)) {
+		csio_err(hw,
+			 "LUN reset cannot be issued on non-ready"
+			 " remote node ssni:0x%x (LUN:%d)\n",
+			 rn->flowid, cmnd->device->lun);
+		goto fail;
+	}
+
+	/* Get a free ioreq structure - SM is already set to uninit */
+	ioreq = csio_get_scsi_ioreq_lock(hw, scsim);
+
+	if (!ioreq) {
+		csio_err(hw, "Out of IO request elements. Active # :%d\n",
+			 scsim->stats.n_active);
+		goto fail;
+	}
+
+	sqset			= &hw->sqset[ln->portid][smp_processor_id()];
+	ioreq->nsge		= 0;
+	ioreq->lnode		= ln;
+	ioreq->rnode		= rn;
+	ioreq->iq_idx		= sqset->iq_idx;
+	ioreq->eq_idx		= sqset->eq_idx;
+
+	csio_scsi_cmnd(ioreq)	= cmnd;
+	cmnd->host_scribble	= (unsigned char *)ioreq;
+	cmnd->SCp.Status	= 0;
+
+	cmnd->SCp.Message	= FCP_TMF_LUN_RESET;
+	ioreq->tmo		= CSIO_SCSI_LUNRST_TMO_MS / 1000;
+
+	/*
+	 * FW times the LUN reset for ioreq->tmo, so we got to wait a little
+	 * longer (10s for now) than that to allow FW to return the timed
+	 * out command.
+	 */
+	count = DIV_ROUND_UP((ioreq->tmo + 10) * 1000, CSIO_SCSI_TM_POLL_MS);
+
+	/* Set cbfn */
+	ioreq->io_cbfn = csio_tm_cbfn;
+
+	/* Save of the ioreq info for later use */
+	sld.level = CSIO_LEV_LUN;
+	sld.lnode = ioreq->lnode;
+	sld.rnode = ioreq->rnode;
+	sld.oslun = (uint64_t)cmnd->device->lun;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	/* Kick off TM SM on the ioreq */
+	retval = csio_scsi_start_tm(ioreq);
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	if (retval != 0) {
+		csio_err(hw, "Failed to issue LUN reset, req:%p, status:%d\n",
+			    ioreq, retval);
+		goto fail_ret_ioreq;
+	}
+
+	csio_dbg(hw, "Waiting max %d secs for LUN reset completion\n",
+		    count * (CSIO_SCSI_TM_POLL_MS / 1000));
+	/* Wait for completion */
+	while ((((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd)
+								&& count--)
+		msleep(CSIO_SCSI_TM_POLL_MS);
+
+	/* LUN reset timed-out */
+	if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) {
+		csio_err(hw, "LUN reset (%d:%d) timed out\n",
+			 cmnd->device->id, cmnd->device->lun);
+
+		spin_lock_irq(&hw->lock);
+		csio_scsi_drvcleanup(ioreq);
+		list_del_init(&ioreq->sm.sm_list);
+		spin_unlock_irq(&hw->lock);
+
+		goto fail_ret_ioreq;
+	}
+
+	/* LUN reset returned, check cached status */
+	if (cmnd->SCp.Status != FW_SUCCESS) {
+		csio_err(hw, "LUN reset failed (%d:%d), status: %d\n",
+			 cmnd->device->id, cmnd->device->lun, cmnd->SCp.Status);
+		goto fail;
+	}
+
+	/* LUN reset succeeded, Start aborting affected I/Os */
+	/*
+	 * Since the host guarantees during LUN reset that there
+	 * will not be any more I/Os to that LUN, until the LUN reset
+	 * completes, we gather pending I/Os after the LUN reset.
+	 */
+	spin_lock_irq(&hw->lock);
+	csio_scsi_gather_active_ios(scsim, &sld, &local_q);
+
+	retval = csio_scsi_abort_io_q(scsim, &local_q, 30000);
+	spin_unlock_irq(&hw->lock);
+
+	/* Aborts may have timed out */
+	if (retval != 0) {
+		csio_err(hw,
+			 "Attempt to abort I/Os during LUN reset of %d"
+			 " returned %d\n", cmnd->device->lun, retval);
+		/* Return I/Os back to active_q */
+		spin_lock_irq(&hw->lock);
+		list_splice_tail_init(&local_q, &scsim->active_q);
+		spin_unlock_irq(&hw->lock);
+		goto fail;
+	}
+
+	CSIO_INC_STATS(rn, n_lun_rst);
+
+	csio_info(hw, "LUN reset occurred (%d:%d)\n",
+		  cmnd->device->id, cmnd->device->lun);
+
+	return SUCCESS;
+
+fail_ret_ioreq:
+	csio_put_scsi_ioreq_lock(hw, scsim, ioreq);
+fail:
+	CSIO_INC_STATS(rn, n_lun_rst_fail);
+	return FAILED;
+}
+
+static int
+csio_slave_alloc(struct scsi_device *sdev)
+{
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+
+	if (!rport || fc_remote_port_chkready(rport))
+		return -ENXIO;
+
+	sdev->hostdata = *((struct csio_lnode **)(rport->dd_data));
+
+	return 0;
+}
+
+static int
+csio_slave_configure(struct scsi_device *sdev)
+{
+	if (sdev->tagged_supported)
+		scsi_activate_tcq(sdev, csio_lun_qdepth);
+	else
+		scsi_deactivate_tcq(sdev, csio_lun_qdepth);
+
+	return 0;
+}
+
+static void
+csio_slave_destroy(struct scsi_device *sdev)
+{
+	sdev->hostdata = NULL;
+}
+
+static int
+csio_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct csio_lnode *ln = shost_priv(shost);
+	int rv = 1;
+
+	spin_lock_irq(shost->host_lock);
+	if (!ln->hwp || csio_list_deleted(&ln->sm.sm_list))
+		goto out;
+
+	rv = csio_scan_done(ln, jiffies, time, csio_max_scan_tmo * HZ,
+			    csio_delta_scan_tmo * HZ);
+out:
+	spin_unlock_irq(shost->host_lock);
+
+	return rv;
+}
+
+struct scsi_host_template csio_fcoe_shost_template = {
+	.module			= THIS_MODULE,
+	.name			= CSIO_DRV_DESC,
+	.proc_name		= KBUILD_MODNAME,
+	.queuecommand		= csio_queuecommand,
+	.eh_abort_handler	= csio_eh_abort_handler,
+	.eh_device_reset_handler = csio_eh_lun_reset_handler,
+	.slave_alloc		= csio_slave_alloc,
+	.slave_configure	= csio_slave_configure,
+	.slave_destroy		= csio_slave_destroy,
+	.scan_finished		= csio_scan_finished,
+	.this_id		= -1,
+	.sg_tablesize		= CSIO_SCSI_MAX_SGE,
+	.cmd_per_lun		= CSIO_MAX_CMD_PER_LUN,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.shost_attrs		= csio_fcoe_lport_attrs,
+	.max_sectors		= CSIO_MAX_SECTOR_SIZE,
+};
+
+struct scsi_host_template csio_fcoe_shost_vport_template = {
+	.module			= THIS_MODULE,
+	.name			= CSIO_DRV_DESC,
+	.proc_name		= KBUILD_MODNAME,
+	.queuecommand		= csio_queuecommand,
+	.eh_abort_handler	= csio_eh_abort_handler,
+	.eh_device_reset_handler = csio_eh_lun_reset_handler,
+	.slave_alloc		= csio_slave_alloc,
+	.slave_configure	= csio_slave_configure,
+	.slave_destroy		= csio_slave_destroy,
+	.scan_finished		= csio_scan_finished,
+	.this_id		= -1,
+	.sg_tablesize		= CSIO_SCSI_MAX_SGE,
+	.cmd_per_lun		= CSIO_MAX_CMD_PER_LUN,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.shost_attrs		= csio_fcoe_vport_attrs,
+	.max_sectors		= CSIO_MAX_SECTOR_SIZE,
+};
+
+/*
+ * csio_scsi_alloc_ddp_bufs - Allocate buffers for DDP of unaligned SGLs.
+ * @scm: SCSI Module
+ * @hw: HW device.
+ * @buf_size: buffer size
+ * @num_buf : Number of buffers.
+ *
+ * This routine allocates DMA buffers required for SCSI Data xfer, if
+ * each SGL buffer for a SCSI Read request posted by SCSI midlayer are
+ * not virtually contiguous.
+ */
+static int
+csio_scsi_alloc_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw,
+			 int buf_size, int num_buf)
+{
+	int n = 0;
+	struct list_head *tmp;
+	struct csio_dma_buf *ddp_desc = NULL;
+	uint32_t unit_size = 0;
+
+	if (!num_buf)
+		return 0;
+
+	if (!buf_size)
+		return -EINVAL;
+
+	INIT_LIST_HEAD(&scm->ddp_freelist);
+
+	/* Align buf size to page size */
+	buf_size = (buf_size + PAGE_SIZE - 1) & PAGE_MASK;
+	/* Initialize dma descriptors */
+	for (n = 0; n < num_buf; n++) {
+		/* Set unit size to request size */
+		unit_size = buf_size;
+		ddp_desc = kzalloc(sizeof(struct csio_dma_buf), GFP_KERNEL);
+		if (!ddp_desc) {
+			csio_err(hw,
+				 "Failed to allocate ddp descriptors,"
+				 " Num allocated = %d.\n",
+				 scm->stats.n_free_ddp);
+			goto no_mem;
+		}
+
+		/* Allocate Dma buffers for DDP */
+		ddp_desc->vaddr = pci_alloc_consistent(hw->pdev, unit_size,
+							&ddp_desc->paddr);
+		if (!ddp_desc->vaddr) {
+			csio_err(hw,
+				 "SCSI response DMA buffer (ddp) allocation"
+				 " failed!\n");
+			kfree(ddp_desc);
+			goto no_mem;
+		}
+
+		ddp_desc->len = unit_size;
+
+		/* Added it to scsi ddp freelist */
+		list_add_tail(&ddp_desc->list, &scm->ddp_freelist);
+		CSIO_INC_STATS(scm, n_free_ddp);
+	}
+
+	return 0;
+no_mem:
+	/* release dma descs back to freelist and free dma memory */
+	list_for_each(tmp, &scm->ddp_freelist) {
+		ddp_desc = (struct csio_dma_buf *) tmp;
+		tmp = csio_list_prev(tmp);
+		pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr,
+				    ddp_desc->paddr);
+		list_del_init(&ddp_desc->list);
+		kfree(ddp_desc);
+	}
+	scm->stats.n_free_ddp = 0;
+
+	return -ENOMEM;
+}
+
+/*
+ * csio_scsi_free_ddp_bufs - free DDP buffers of unaligned SGLs.
+ * @scm: SCSI Module
+ * @hw: HW device.
+ *
+ * This routine frees ddp buffers.
+ */
+static void
+csio_scsi_free_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw)
+{
+	struct list_head *tmp;
+	struct csio_dma_buf *ddp_desc;
+
+	/* release dma descs back to freelist and free dma memory */
+	list_for_each(tmp, &scm->ddp_freelist) {
+		ddp_desc = (struct csio_dma_buf *) tmp;
+		tmp = csio_list_prev(tmp);
+		pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr,
+				    ddp_desc->paddr);
+		list_del_init(&ddp_desc->list);
+		kfree(ddp_desc);
+	}
+	scm->stats.n_free_ddp = 0;
+}
+
+/**
+ * csio_scsim_init - Initialize SCSI Module
+ * @scm:	SCSI Module
+ * @hw:		HW module
+ *
+ */
+int
+csio_scsim_init(struct csio_scsim *scm, struct csio_hw *hw)
+{
+	int i;
+	struct csio_ioreq *ioreq;
+	struct csio_dma_buf *dma_buf;
+
+	INIT_LIST_HEAD(&scm->active_q);
+	scm->hw = hw;
+
+	scm->proto_cmd_len = sizeof(struct fcp_cmnd);
+	scm->proto_rsp_len = CSIO_SCSI_RSP_LEN;
+	scm->max_sge = CSIO_SCSI_MAX_SGE;
+
+	spin_lock_init(&scm->freelist_lock);
+
+	/* Pre-allocate ioreqs and initialize them */
+	INIT_LIST_HEAD(&scm->ioreq_freelist);
+	for (i = 0; i < csio_scsi_ioreqs; i++) {
+
+		ioreq = kzalloc(sizeof(struct csio_ioreq), GFP_KERNEL);
+		if (!ioreq) {
+			csio_err(hw,
+				 "I/O request element allocation failed, "
+				 " Num allocated = %d.\n",
+				 scm->stats.n_free_ioreq);
+
+			goto free_ioreq;
+		}
+
+		/* Allocate Dma buffers for Response Payload */
+		dma_buf = &ioreq->dma_buf;
+		dma_buf->vaddr = pci_pool_alloc(hw->scsi_pci_pool, GFP_KERNEL,
+						&dma_buf->paddr);
+		if (!dma_buf->vaddr) {
+			csio_err(hw,
+				 "SCSI response DMA buffer allocation"
+				 " failed!\n");
+			kfree(ioreq);
+			goto free_ioreq;
+		}
+
+		dma_buf->len = scm->proto_rsp_len;
+
+		/* Set state to uninit */
+		csio_init_state(&ioreq->sm, csio_scsis_uninit);
+		INIT_LIST_HEAD(&ioreq->gen_list);
+		init_completion(&ioreq->cmplobj);
+
+		list_add_tail(&ioreq->sm.sm_list, &scm->ioreq_freelist);
+		CSIO_INC_STATS(scm, n_free_ioreq);
+	}
+
+	if (csio_scsi_alloc_ddp_bufs(scm, hw, PAGE_SIZE, csio_ddp_descs))
+		goto free_ioreq;
+
+	return 0;
+
+free_ioreq:
+	/*
+	 * Free up existing allocations, since an error
+	 * from here means we are returning for good
+	 */
+	while (!list_empty(&scm->ioreq_freelist)) {
+		struct csio_sm *tmp;
+
+		tmp = list_first_entry(&scm->ioreq_freelist,
+				       struct csio_sm, sm_list);
+		list_del_init(&tmp->sm_list);
+		ioreq = (struct csio_ioreq *)tmp;
+
+		dma_buf = &ioreq->dma_buf;
+		pci_pool_free(hw->scsi_pci_pool, dma_buf->vaddr,
+			      dma_buf->paddr);
+
+		kfree(ioreq);
+	}
+
+	scm->stats.n_free_ioreq = 0;
+
+	return -ENOMEM;
+}
+
+/**
+ * csio_scsim_exit: Uninitialize SCSI Module
+ * @scm: SCSI Module
+ *
+ */
+void
+csio_scsim_exit(struct csio_scsim *scm)
+{
+	struct csio_ioreq *ioreq;
+	struct csio_dma_buf *dma_buf;
+
+	while (!list_empty(&scm->ioreq_freelist)) {
+		struct csio_sm *tmp;
+
+		tmp = list_first_entry(&scm->ioreq_freelist,
+				       struct csio_sm, sm_list);
+		list_del_init(&tmp->sm_list);
+		ioreq = (struct csio_ioreq *)tmp;
+
+		dma_buf = &ioreq->dma_buf;
+		pci_pool_free(scm->hw->scsi_pci_pool, dma_buf->vaddr,
+			      dma_buf->paddr);
+
+		kfree(ioreq);
+	}
+
+	scm->stats.n_free_ioreq = 0;
+
+	csio_scsi_free_ddp_bufs(scm, scm->hw);
+}
diff --git a/drivers/scsi/csiostor/csio_scsi.h b/drivers/scsi/csiostor/csio_scsi.h
new file mode 100644
index 0000000..2257c3d
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_scsi.h
@@ -0,0 +1,342 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_SCSI_H__
+#define __CSIO_SCSI_H__
+
+#include <linux/spinlock_types.h>
+#include <linux/completion.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/fc/fc_fcp.h>
+
+#include "csio_defs.h"
+#include "csio_wr.h"
+
+extern struct scsi_host_template csio_fcoe_shost_template;
+extern struct scsi_host_template csio_fcoe_shost_vport_template;
+
+extern int csio_scsi_eqsize;
+extern int csio_scsi_iqlen;
+extern int csio_scsi_ioreqs;
+extern uint32_t csio_max_scan_tmo;
+extern uint32_t csio_delta_scan_tmo;
+extern int csio_lun_qdepth;
+
+/*
+ **************************** NOTE *******************************
+ * How do we calculate MAX FCoE SCSI SGEs? Here is the math:
+ * Max Egress WR size = 512 bytes
+ * One SCSI egress WR has the following fixed no of bytes:
+ *      48 (sizeof(struct fw_scsi_write[read]_wr)) - FW WR
+ *    + 32 (sizeof(struct fc_fcp_cmnd)) - Immediate FCP_CMD
+ *    ------
+ *      80
+ *    ------
+ * That leaves us with 512 - 96 = 432 bytes for data SGE. Using
+ * struct ulptx_sgl header for the SGE consumes:
+ *	- 4 bytes for cmnd_sge.
+ *	- 12 bytes for the first SGL.
+ * That leaves us with 416 bytes for the remaining SGE pairs. Which is
+ * is 416 / 24 (size(struct ulptx_sge_pair)) = 17 SGE pairs,
+ * or 34 SGEs. Adding the first SGE fetches us 35 SGEs.
+ */
+#define CSIO_SCSI_MAX_SGE		35
+#define CSIO_SCSI_ABRT_TMO_MS		60000
+#define CSIO_SCSI_LUNRST_TMO_MS		60000
+#define CSIO_SCSI_TM_POLL_MS		2000	/* should be less than
+						 * all TM timeouts.
+						 */
+#define CSIO_SCSI_IQ_WRSZ		128
+#define CSIO_SCSI_IQSIZE		(csio_scsi_iqlen * CSIO_SCSI_IQ_WRSZ)
+
+#define	CSIO_MAX_SNS_LEN		128
+#define	CSIO_SCSI_RSP_LEN	(FCP_RESP_WITH_EXT + 4 + CSIO_MAX_SNS_LEN)
+
+/* Reference to scsi_cmnd */
+#define csio_scsi_cmnd(req)		((req)->scratch1)
+
+struct csio_scsi_stats {
+	uint64_t		n_tot_success;	/* Total number of good I/Os */
+	uint32_t		n_rn_nr_error;	/* No. of remote-node-not-
+						 * ready errors
+						 */
+	uint32_t		n_hw_nr_error;	/* No. of hw-module-not-
+						 * ready errors
+						 */
+	uint32_t		n_dmamap_error;	/* No. of DMA map erros */
+	uint32_t		n_unsupp_sge_error; /* No. of too-many-SGes
+						     * errors.
+						     */
+	uint32_t		n_no_req_error;	/* No. of Out-of-ioreqs error */
+	uint32_t		n_busy_error;	/* No. of -EBUSY errors */
+	uint32_t		n_hosterror;	/* No. of FW_HOSTERROR I/O */
+	uint32_t		n_rsperror;	/* No. of response errors */
+	uint32_t		n_autosense;	/* No. of auto sense replies */
+	uint32_t		n_ovflerror;	/* No. of overflow errors */
+	uint32_t		n_unflerror;	/* No. of underflow errors */
+	uint32_t		n_rdev_nr_error;/* No. of rdev not
+						 * ready errors
+						 */
+	uint32_t		n_rdev_lost_error;/* No. of rdev lost errors */
+	uint32_t		n_rdev_logo_error;/* No. of rdev logo errors */
+	uint32_t		n_link_down_error;/* No. of link down errors */
+	uint32_t		n_no_xchg_error; /* No. no exchange error */
+	uint32_t		n_unknown_error;/* No. of unhandled errors */
+	uint32_t		n_aborted;	/* No. of aborted I/Os */
+	uint32_t		n_abrt_timedout; /* No. of abort timedouts */
+	uint32_t		n_abrt_fail;	/* No. of abort failures */
+	uint32_t		n_abrt_dups;	/* No. of duplicate aborts */
+	uint32_t		n_abrt_race_comp; /* No. of aborts that raced
+						   * with completions.
+						   */
+	uint32_t		n_abrt_busy_error;/* No. of abort failures
+						   * due to -EBUSY.
+						   */
+	uint32_t		n_closed;	/* No. of closed I/Os */
+	uint32_t		n_cls_busy_error; /* No. of close failures
+						   * due to -EBUSY.
+						   */
+	uint32_t		n_active;	/* No. of IOs in active_q */
+	uint32_t		n_tm_active;	/* No. of TMs in active_q */
+	uint32_t		n_wcbfn;	/* No. of I/Os in worker
+						 * cbfn q
+						 */
+	uint32_t		n_free_ioreq;	/* No. of freelist entries */
+	uint32_t		n_free_ddp;	/* No. of DDP freelist */
+	uint32_t		n_unaligned;	/* No. of Unaligned SGls */
+	uint32_t		n_inval_cplop;	/* No. invalid CPL op's in IQ */
+	uint32_t		n_inval_scsiop;	/* No. invalid scsi op's in IQ*/
+};
+
+struct csio_scsim {
+	struct csio_hw		*hw;		/* Pointer to HW moduel */
+	uint8_t			max_sge;	/* Max SGE */
+	uint8_t			proto_cmd_len;	/* Proto specific SCSI
+						 * cmd length
+						 */
+	uint16_t		proto_rsp_len;	/* Proto specific SCSI
+						 * response length
+						 */
+	spinlock_t		freelist_lock;	/* Lock for ioreq freelist */
+	struct list_head	active_q;	/* Outstanding SCSI I/Os */
+	struct list_head	ioreq_freelist;	/* Free list of ioreq's */
+	struct list_head	ddp_freelist;	/* DDP descriptor freelist */
+	struct csio_scsi_stats	stats;		/* This module's statistics */
+};
+
+/* State machine defines */
+enum csio_scsi_ev {
+	CSIO_SCSIE_START_IO = 1,		/* Start a regular SCSI IO */
+	CSIO_SCSIE_START_TM,			/* Start a TM IO */
+	CSIO_SCSIE_COMPLETED,			/* IO Completed */
+	CSIO_SCSIE_ABORT,			/* Abort IO */
+	CSIO_SCSIE_ABORTED,			/* IO Aborted */
+	CSIO_SCSIE_CLOSE,			/* Close exchange */
+	CSIO_SCSIE_CLOSED,			/* Exchange closed */
+	CSIO_SCSIE_DRVCLEANUP,			/* Driver wants to manually
+						 * cleanup this I/O.
+						 */
+};
+
+enum csio_scsi_lev {
+	CSIO_LEV_ALL = 1,
+	CSIO_LEV_LNODE,
+	CSIO_LEV_RNODE,
+	CSIO_LEV_LUN,
+};
+
+struct csio_scsi_level_data {
+	enum csio_scsi_lev	level;
+	struct csio_rnode	*rnode;
+	struct csio_lnode	*lnode;
+	uint64_t		oslun;
+};
+
+static inline struct csio_ioreq *
+csio_get_scsi_ioreq(struct csio_scsim *scm)
+{
+	struct csio_sm *req;
+
+	if (likely(!list_empty(&scm->ioreq_freelist))) {
+		req = list_first_entry(&scm->ioreq_freelist,
+				       struct csio_sm, sm_list);
+		list_del_init(&req->sm_list);
+		CSIO_DEC_STATS(scm, n_free_ioreq);
+		return (struct csio_ioreq *)req;
+	} else
+		return NULL;
+}
+
+static inline void
+csio_put_scsi_ioreq(struct csio_scsim *scm, struct csio_ioreq *ioreq)
+{
+	list_add_tail(&ioreq->sm.sm_list, &scm->ioreq_freelist);
+	CSIO_INC_STATS(scm, n_free_ioreq);
+}
+
+static inline void
+csio_put_scsi_ioreq_list(struct csio_scsim *scm, struct list_head *reqlist,
+			 int n)
+{
+	list_splice_init(reqlist, &scm->ioreq_freelist);
+	scm->stats.n_free_ioreq += n;
+}
+
+static inline struct csio_dma_buf *
+csio_get_scsi_ddp(struct csio_scsim *scm)
+{
+	struct csio_dma_buf *ddp;
+
+	if (likely(!list_empty(&scm->ddp_freelist))) {
+		ddp = list_first_entry(&scm->ddp_freelist,
+				       struct csio_dma_buf, list);
+		list_del_init(&ddp->list);
+		CSIO_DEC_STATS(scm, n_free_ddp);
+		return ddp;
+	} else
+		return NULL;
+}
+
+static inline void
+csio_put_scsi_ddp(struct csio_scsim *scm, struct csio_dma_buf *ddp)
+{
+	list_add_tail(&ddp->list, &scm->ddp_freelist);
+	CSIO_INC_STATS(scm, n_free_ddp);
+}
+
+static inline void
+csio_put_scsi_ddp_list(struct csio_scsim *scm, struct list_head *reqlist,
+			 int n)
+{
+	list_splice_tail_init(reqlist, &scm->ddp_freelist);
+	scm->stats.n_free_ddp += n;
+}
+
+static inline void
+csio_scsi_completed(struct csio_ioreq *ioreq, struct list_head *cbfn_q)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_COMPLETED);
+	if (csio_list_deleted(&ioreq->sm.sm_list))
+		list_add_tail(&ioreq->sm.sm_list, cbfn_q);
+}
+
+static inline void
+csio_scsi_aborted(struct csio_ioreq *ioreq, struct list_head *cbfn_q)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_ABORTED);
+	list_add_tail(&ioreq->sm.sm_list, cbfn_q);
+}
+
+static inline void
+csio_scsi_closed(struct csio_ioreq *ioreq, struct list_head *cbfn_q)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_CLOSED);
+	list_add_tail(&ioreq->sm.sm_list, cbfn_q);
+}
+
+static inline void
+csio_scsi_drvcleanup(struct csio_ioreq *ioreq)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_DRVCLEANUP);
+}
+
+/*
+ * csio_scsi_start_io - Kick starts the IO SM.
+ * @req: io request SM.
+ *
+ * needs to be called with lock held.
+ */
+static inline int
+csio_scsi_start_io(struct csio_ioreq *ioreq)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_START_IO);
+	return ioreq->drv_status;
+}
+
+/*
+ * csio_scsi_start_tm - Kicks off the Task management IO SM.
+ * @req: io request SM.
+ *
+ * needs to be called with lock held.
+ */
+static inline int
+csio_scsi_start_tm(struct csio_ioreq *ioreq)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_START_TM);
+	return ioreq->drv_status;
+}
+
+/*
+ * csio_scsi_abort - Abort an IO request
+ * @req: io request SM.
+ *
+ * needs to be called with lock held.
+ */
+static inline int
+csio_scsi_abort(struct csio_ioreq *ioreq)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_ABORT);
+	return ioreq->drv_status;
+}
+
+/*
+ * csio_scsi_close - Close an IO request
+ * @req: io request SM.
+ *
+ * needs to be called with lock held.
+ */
+static inline int
+csio_scsi_close(struct csio_ioreq *ioreq)
+{
+	csio_post_event(&ioreq->sm, CSIO_SCSIE_CLOSE);
+	return ioreq->drv_status;
+}
+
+void csio_scsi_cleanup_io_q(struct csio_scsim *, struct list_head *);
+int csio_scsim_cleanup_io(struct csio_scsim *, bool abort);
+int csio_scsim_cleanup_io_lnode(struct csio_scsim *,
+					  struct csio_lnode *);
+struct csio_ioreq *csio_scsi_cmpl_handler(struct csio_hw *, void *, uint32_t,
+					  struct csio_fl_dma_buf *,
+					  void *, uint8_t **);
+int csio_scsi_qconfig(struct csio_hw *);
+int csio_scsim_init(struct csio_scsim *, struct csio_hw *);
+void csio_scsim_exit(struct csio_scsim *);
+
+#endif /* __CSIO_SCSI_H__ */
diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c
new file mode 100644
index 0000000..c32df1b
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_wr.c
@@ -0,0 +1,1632 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <asm/page.h>
+#include <linux/cache.h>
+
+#include "csio_hw.h"
+#include "csio_wr.h"
+#include "csio_mb.h"
+#include "csio_defs.h"
+
+int csio_intr_coalesce_cnt;		/* value:SGE_INGRESS_RX_THRESHOLD[0] */
+static int csio_sge_thresh_reg;		/* SGE_INGRESS_RX_THRESHOLD[0] */
+
+int csio_intr_coalesce_time = 10;	/* value:SGE_TIMER_VALUE_1 */
+static int csio_sge_timer_reg = 1;
+
+#define CSIO_SET_FLBUF_SIZE(_hw, _reg, _val)				\
+	csio_wr_reg32((_hw), (_val), SGE_FL_BUFFER_SIZE##_reg)
+
+static void
+csio_get_flbuf_size(struct csio_hw *hw, struct csio_sge *sge, uint32_t reg)
+{
+	sge->sge_fl_buf_size[reg] = csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE0 +
+							reg * sizeof(uint32_t));
+}
+
+/* Free list buffer size */
+static inline uint32_t
+csio_wr_fl_bufsz(struct csio_sge *sge, struct csio_dma_buf *buf)
+{
+	return sge->sge_fl_buf_size[buf->paddr & 0xF];
+}
+
+/* Size of the egress queue status page */
+static inline uint32_t
+csio_wr_qstat_pgsz(struct csio_hw *hw)
+{
+	return (hw->wrm.sge.sge_control & EGRSTATUSPAGESIZE(1)) ?  128 : 64;
+}
+
+/* Ring freelist doorbell */
+static inline void
+csio_wr_ring_fldb(struct csio_hw *hw, struct csio_q *flq)
+{
+	/*
+	 * Ring the doorbell only when we have atleast CSIO_QCREDIT_SZ
+	 * number of bytes in the freelist queue. This translates to atleast
+	 * 8 freelist buffer pointers (since each pointer is 8 bytes).
+	 */
+	if (flq->inc_idx >= 8) {
+		csio_wr_reg32(hw, DBPRIO(1) | QID(flq->un.fl.flid) |
+			      PIDX(flq->inc_idx / 8),
+			      MYPF_REG(SGE_PF_KDOORBELL));
+		flq->inc_idx &= 7;
+	}
+}
+
+/* Write a 0 cidx increment value to enable SGE interrupts for this queue */
+static void
+csio_wr_sge_intr_enable(struct csio_hw *hw, uint16_t iqid)
+{
+	csio_wr_reg32(hw, CIDXINC(0)		|
+			  INGRESSQID(iqid)	|
+			  TIMERREG(X_TIMERREG_RESTART_COUNTER),
+			  MYPF_REG(SGE_PF_GTS));
+}
+
+/*
+ * csio_wr_fill_fl - Populate the FL buffers of a FL queue.
+ * @hw: HW module.
+ * @flq: Freelist queue.
+ *
+ * Fill up freelist buffer entries with buffers of size specified
+ * in the size register.
+ *
+ */
+static int
+csio_wr_fill_fl(struct csio_hw *hw, struct csio_q *flq)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+	__be64 *d = (__be64 *)(flq->vstart);
+	struct csio_dma_buf *buf = &flq->un.fl.bufs[0];
+	uint64_t paddr;
+	int sreg = flq->un.fl.sreg;
+	int n = flq->credits;
+
+	while (n--) {
+		buf->len = sge->sge_fl_buf_size[sreg];
+		buf->vaddr = pci_alloc_consistent(hw->pdev, buf->len,
+						  &buf->paddr);
+		if (!buf->vaddr) {
+			csio_err(hw, "Could only fill %d buffers!\n", n + 1);
+			return -ENOMEM;
+		}
+
+		paddr = buf->paddr | (sreg & 0xF);
+
+		*d++ = cpu_to_be64(paddr);
+		buf++;
+	}
+
+	return 0;
+}
+
+/*
+ * csio_wr_update_fl -
+ * @hw: HW module.
+ * @flq: Freelist queue.
+ *
+ *
+ */
+static inline void
+csio_wr_update_fl(struct csio_hw *hw, struct csio_q *flq, uint16_t n)
+{
+
+	flq->inc_idx += n;
+	flq->pidx += n;
+	if (unlikely(flq->pidx >= flq->credits))
+		flq->pidx -= (uint16_t)flq->credits;
+
+	CSIO_INC_STATS(flq, n_flq_refill);
+}
+
+/*
+ * csio_wr_alloc_q - Allocate a WR queue and initialize it.
+ * @hw: HW module
+ * @qsize: Size of the queue in bytes
+ * @wrsize: Since of WR in this queue, if fixed.
+ * @type: Type of queue (Ingress/Egress/Freelist)
+ * @owner: Module that owns this queue.
+ * @nflb: Number of freelist buffers for FL.
+ * @sreg: What is the FL buffer size register?
+ * @iq_int_handler: Ingress queue handler in INTx mode.
+ *
+ * This function allocates and sets up a queue for the caller
+ * of size qsize, aligned at the required boundary. This is subject to
+ * be free entries being available in the queue array. If one is found,
+ * it is initialized with the allocated queue, marked as being used (owner),
+ * and a handle returned to the caller in form of the queue's index
+ * into the q_arr array.
+ * If user has indicated a freelist (by specifying nflb > 0), create
+ * another queue (with its own index into q_arr) for the freelist. Allocate
+ * memory for DMA buffer metadata (vaddr, len etc). Save off the freelist
+ * idx in the ingress queue's flq.idx. This is how a Freelist is associated
+ * with its owning ingress queue.
+ */
+int
+csio_wr_alloc_q(struct csio_hw *hw, uint32_t qsize, uint32_t wrsize,
+		uint16_t type, void *owner, uint32_t nflb, int sreg,
+		iq_handler_t iq_intx_handler)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_q	*q, *flq;
+	int		free_idx = wrm->free_qidx;
+	int		ret_idx = free_idx;
+	uint32_t	qsz;
+	int flq_idx;
+
+	if (free_idx >= wrm->num_q) {
+		csio_err(hw, "No more free queues.\n");
+		return -1;
+	}
+
+	switch (type) {
+	case CSIO_EGRESS:
+		qsz = ALIGN(qsize, CSIO_QCREDIT_SZ) + csio_wr_qstat_pgsz(hw);
+		break;
+	case CSIO_INGRESS:
+		switch (wrsize) {
+		case 16:
+		case 32:
+		case 64:
+		case 128:
+			break;
+		default:
+			csio_err(hw, "Invalid Ingress queue WR size:%d\n",
+				    wrsize);
+			return -1;
+		}
+
+		/*
+		 * Number of elements must be a multiple of 16
+		 * So this includes status page size
+		 */
+		qsz = ALIGN(qsize/wrsize, 16) * wrsize;
+
+		break;
+	case CSIO_FREELIST:
+		qsz = ALIGN(qsize/wrsize, 8) * wrsize + csio_wr_qstat_pgsz(hw);
+		break;
+	default:
+		csio_err(hw, "Invalid queue type: 0x%x\n", type);
+		return -1;
+	}
+
+	q = wrm->q_arr[free_idx];
+
+	q->vstart = pci_alloc_consistent(hw->pdev, qsz, &q->pstart);
+	if (!q->vstart) {
+		csio_err(hw,
+			 "Failed to allocate DMA memory for "
+			 "queue at id: %d size: %d\n", free_idx, qsize);
+		return -1;
+	}
+
+	/*
+	 * We need to zero out the contents, importantly for ingress,
+	 * since we start with a generatiom bit of 1 for ingress.
+	 */
+	memset(q->vstart, 0, qsz);
+
+	q->type		= type;
+	q->owner	= owner;
+	q->pidx		= q->cidx = q->inc_idx = 0;
+	q->size		= qsz;
+	q->wr_sz	= wrsize;	/* If using fixed size WRs */
+
+	wrm->free_qidx++;
+
+	if (type == CSIO_INGRESS) {
+		/* Since queue area is set to zero */
+		q->un.iq.genbit	= 1;
+
+		/*
+		 * Ingress queue status page size is always the size of
+		 * the ingress queue entry.
+		 */
+		q->credits	= (qsz - q->wr_sz) / q->wr_sz;
+		q->vwrap	= (void *)((uintptr_t)(q->vstart) + qsz
+							- q->wr_sz);
+
+		/* Allocate memory for FL if requested */
+		if (nflb > 0) {
+			flq_idx = csio_wr_alloc_q(hw, nflb * sizeof(__be64),
+						  sizeof(__be64), CSIO_FREELIST,
+						  owner, 0, sreg, NULL);
+			if (flq_idx == -1) {
+				csio_err(hw,
+					 "Failed to allocate FL queue"
+					 " for IQ idx:%d\n", free_idx);
+				return -1;
+			}
+
+			/* Associate the new FL with the Ingress quue */
+			q->un.iq.flq_idx = flq_idx;
+
+			flq = wrm->q_arr[q->un.iq.flq_idx];
+			flq->un.fl.bufs = kzalloc(flq->credits *
+						  sizeof(struct csio_dma_buf),
+						  GFP_KERNEL);
+			if (!flq->un.fl.bufs) {
+				csio_err(hw,
+					 "Failed to allocate FL queue bufs"
+					 " for IQ idx:%d\n", free_idx);
+				return -1;
+			}
+
+			flq->un.fl.packen = 0;
+			flq->un.fl.offset = 0;
+			flq->un.fl.sreg = sreg;
+
+			/* Fill up the free list buffers */
+			if (csio_wr_fill_fl(hw, flq))
+				return -1;
+
+			/*
+			 * Make sure in a FLQ, atleast 1 credit (8 FL buffers)
+			 * remains unpopulated,otherwise HW thinks
+			 * FLQ is empty.
+			 */
+			flq->pidx = flq->inc_idx = flq->credits - 8;
+		} else {
+			q->un.iq.flq_idx = -1;
+		}
+
+		/* Associate the IQ INTx handler. */
+		q->un.iq.iq_intx_handler = iq_intx_handler;
+
+		csio_q_iqid(hw, ret_idx) = CSIO_MAX_QID;
+
+	} else if (type == CSIO_EGRESS) {
+		q->credits = (qsz - csio_wr_qstat_pgsz(hw)) / CSIO_QCREDIT_SZ;
+		q->vwrap   = (void *)((uintptr_t)(q->vstart) + qsz
+						- csio_wr_qstat_pgsz(hw));
+		csio_q_eqid(hw, ret_idx) = CSIO_MAX_QID;
+	} else { /* Freelist */
+		q->credits = (qsz - csio_wr_qstat_pgsz(hw)) / sizeof(__be64);
+		q->vwrap   = (void *)((uintptr_t)(q->vstart) + qsz
+						- csio_wr_qstat_pgsz(hw));
+		csio_q_flid(hw, ret_idx) = CSIO_MAX_QID;
+	}
+
+	return ret_idx;
+}
+
+/*
+ * csio_wr_iq_create_rsp - Response handler for IQ creation.
+ * @hw: The HW module.
+ * @mbp: Mailbox.
+ * @iq_idx: Ingress queue that got created.
+ *
+ * Handle FW_IQ_CMD mailbox completion. Save off the assigned IQ/FL ids.
+ */
+static int
+csio_wr_iq_create_rsp(struct csio_hw *hw, struct csio_mb *mbp, int iq_idx)
+{
+	struct csio_iq_params iqp;
+	enum fw_retval retval;
+	uint32_t iq_id;
+	int flq_idx;
+
+	memset(&iqp, 0, sizeof(struct csio_iq_params));
+
+	csio_mb_iq_alloc_write_rsp(hw, mbp, &retval, &iqp);
+
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "IQ cmd returned 0x%x!\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	csio_q_iqid(hw, iq_idx)		= iqp.iqid;
+	csio_q_physiqid(hw, iq_idx)	= iqp.physiqid;
+	csio_q_pidx(hw, iq_idx)		= csio_q_cidx(hw, iq_idx) = 0;
+	csio_q_inc_idx(hw, iq_idx)	= 0;
+
+	/* Actual iq-id. */
+	iq_id = iqp.iqid - hw->wrm.fw_iq_start;
+
+	/* Set the iq-id to iq map table. */
+	if (iq_id >= CSIO_MAX_IQ) {
+		csio_err(hw,
+			 "Exceeding MAX_IQ(%d) supported!"
+			 " iqid:%d rel_iqid:%d FW iq_start:%d\n",
+			 CSIO_MAX_IQ, iq_id, iqp.iqid, hw->wrm.fw_iq_start);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+	csio_q_set_intr_map(hw, iq_idx, iq_id);
+
+	/*
+	 * During FW_IQ_CMD, FW sets interrupt_sent bit to 1 in the SGE
+	 * ingress context of this queue. This will block interrupts to
+	 * this queue until the next GTS write. Therefore, we do a
+	 * 0-cidx increment GTS write for this queue just to clear the
+	 * interrupt_sent bit. This will re-enable interrupts to this
+	 * queue.
+	 */
+	csio_wr_sge_intr_enable(hw, iqp.physiqid);
+
+	flq_idx = csio_q_iq_flq_idx(hw, iq_idx);
+	if (flq_idx != -1) {
+		struct csio_q *flq = hw->wrm.q_arr[flq_idx];
+
+		csio_q_flid(hw, flq_idx) = iqp.fl0id;
+		csio_q_cidx(hw, flq_idx) = 0;
+		csio_q_pidx(hw, flq_idx)    = csio_q_credits(hw, flq_idx) - 8;
+		csio_q_inc_idx(hw, flq_idx) = csio_q_credits(hw, flq_idx) - 8;
+
+		/* Now update SGE about the buffers allocated during init */
+		csio_wr_ring_fldb(hw, flq);
+	}
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_wr_iq_create - Configure an Ingress queue with FW.
+ * @hw: The HW module.
+ * @priv: Private data object.
+ * @iq_idx: Ingress queue index in the WR module.
+ * @vec: MSIX vector.
+ * @portid: PCIE Channel to be associated with this queue.
+ * @async: Is this a FW asynchronous message handling queue?
+ * @cbfn: Completion callback.
+ *
+ * This API configures an ingress queue with FW by issuing a FW_IQ_CMD mailbox
+ * with alloc/write bits set.
+ */
+int
+csio_wr_iq_create(struct csio_hw *hw, void *priv, int iq_idx,
+		  uint32_t vec, uint8_t portid, bool async,
+		  void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct csio_mb  *mbp;
+	struct csio_iq_params iqp;
+	int flq_idx;
+
+	memset(&iqp, 0, sizeof(struct csio_iq_params));
+	csio_q_portid(hw, iq_idx) = portid;
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		csio_err(hw, "IQ command out of memory!\n");
+		return -ENOMEM;
+	}
+
+	switch (hw->intr_mode) {
+	case CSIO_IM_INTX:
+	case CSIO_IM_MSI:
+		/* For interrupt forwarding queue only */
+		if (hw->intr_iq_idx == iq_idx)
+			iqp.iqandst	= X_INTERRUPTDESTINATION_PCIE;
+		else
+			iqp.iqandst	= X_INTERRUPTDESTINATION_IQ;
+		iqp.iqandstindex	=
+			csio_q_physiqid(hw, hw->intr_iq_idx);
+		break;
+	case CSIO_IM_MSIX:
+		iqp.iqandst		= X_INTERRUPTDESTINATION_PCIE;
+		iqp.iqandstindex	= (uint16_t)vec;
+		break;
+	case CSIO_IM_NONE:
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	/* Pass in the ingress queue cmd parameters */
+	iqp.pfn			= hw->pfn;
+	iqp.vfn			= 0;
+	iqp.iq_start		= 1;
+	iqp.viid		= 0;
+	iqp.type		= FW_IQ_TYPE_FL_INT_CAP;
+	iqp.iqasynch		= async;
+	if (csio_intr_coalesce_cnt)
+		iqp.iqanus	= X_UPDATESCHEDULING_COUNTER_OPTTIMER;
+	else
+		iqp.iqanus	= X_UPDATESCHEDULING_TIMER;
+	iqp.iqanud		= X_UPDATEDELIVERY_INTERRUPT;
+	iqp.iqpciech		= portid;
+	iqp.iqintcntthresh	= (uint8_t)csio_sge_thresh_reg;
+
+	switch (csio_q_wr_sz(hw, iq_idx)) {
+	case 16:
+		iqp.iqesize = 0; break;
+	case 32:
+		iqp.iqesize = 1; break;
+	case 64:
+		iqp.iqesize = 2; break;
+	case 128:
+		iqp.iqesize = 3; break;
+	}
+
+	iqp.iqsize		= csio_q_size(hw, iq_idx) /
+						csio_q_wr_sz(hw, iq_idx);
+	iqp.iqaddr		= csio_q_pstart(hw, iq_idx);
+
+	flq_idx = csio_q_iq_flq_idx(hw, iq_idx);
+	if (flq_idx != -1) {
+		struct csio_q *flq = hw->wrm.q_arr[flq_idx];
+
+		iqp.fl0paden	= 1;
+		iqp.fl0packen	= flq->un.fl.packen ? 1 : 0;
+		iqp.fl0fbmin	= X_FETCHBURSTMIN_64B;
+		iqp.fl0fbmax	= X_FETCHBURSTMAX_512B;
+		iqp.fl0size	= csio_q_size(hw, flq_idx) / CSIO_QCREDIT_SZ;
+		iqp.fl0addr	= csio_q_pstart(hw, flq_idx);
+	}
+
+	csio_mb_iq_alloc_write(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &iqp, cbfn);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of IQ cmd failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	if (cbfn != NULL)
+		return 0;
+
+	return csio_wr_iq_create_rsp(hw, mbp, iq_idx);
+}
+
+/*
+ * csio_wr_eq_create_rsp - Response handler for EQ creation.
+ * @hw: The HW module.
+ * @mbp: Mailbox.
+ * @eq_idx: Egress queue that got created.
+ *
+ * Handle FW_EQ_OFLD_CMD mailbox completion. Save off the assigned EQ ids.
+ */
+static int
+csio_wr_eq_cfg_rsp(struct csio_hw *hw, struct csio_mb *mbp, int eq_idx)
+{
+	struct csio_eq_params eqp;
+	enum fw_retval retval;
+
+	memset(&eqp, 0, sizeof(struct csio_eq_params));
+
+	csio_mb_eq_ofld_alloc_write_rsp(hw, mbp, &retval, &eqp);
+
+	if (retval != FW_SUCCESS) {
+		csio_err(hw, "EQ OFLD cmd returned 0x%x!\n", retval);
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	csio_q_eqid(hw, eq_idx)	= (uint16_t)eqp.eqid;
+	csio_q_physeqid(hw, eq_idx) = (uint16_t)eqp.physeqid;
+	csio_q_pidx(hw, eq_idx)	= csio_q_cidx(hw, eq_idx) = 0;
+	csio_q_inc_idx(hw, eq_idx) = 0;
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return 0;
+}
+
+/*
+ * csio_wr_eq_create - Configure an Egress queue with FW.
+ * @hw: HW module.
+ * @priv: Private data.
+ * @eq_idx: Egress queue index in the WR module.
+ * @iq_idx: Associated ingress queue index.
+ * @cbfn: Completion callback.
+ *
+ * This API configures a offload egress queue with FW by issuing a
+ * FW_EQ_OFLD_CMD  (with alloc + write ) mailbox.
+ */
+int
+csio_wr_eq_create(struct csio_hw *hw, void *priv, int eq_idx,
+		  int iq_idx, uint8_t portid,
+		  void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	struct csio_mb  *mbp;
+	struct csio_eq_params eqp;
+
+	memset(&eqp, 0, sizeof(struct csio_eq_params));
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp) {
+		csio_err(hw, "EQ command out of memory!\n");
+		return -ENOMEM;
+	}
+
+	eqp.pfn			= hw->pfn;
+	eqp.vfn			= 0;
+	eqp.eqstart		= 1;
+	eqp.hostfcmode		= X_HOSTFCMODE_STATUS_PAGE;
+	eqp.iqid		= csio_q_iqid(hw, iq_idx);
+	eqp.fbmin		= X_FETCHBURSTMIN_64B;
+	eqp.fbmax		= X_FETCHBURSTMAX_512B;
+	eqp.cidxfthresh		= 0;
+	eqp.pciechn		= portid;
+	eqp.eqsize		= csio_q_size(hw, eq_idx) / CSIO_QCREDIT_SZ;
+	eqp.eqaddr		= csio_q_pstart(hw, eq_idx);
+
+	csio_mb_eq_ofld_alloc_write(hw, mbp, priv, CSIO_MB_DEFAULT_TMO,
+				    &eqp, cbfn);
+
+	if (csio_mb_issue(hw, mbp)) {
+		csio_err(hw, "Issue of EQ OFLD cmd failed!\n");
+		mempool_free(mbp, hw->mb_mempool);
+		return -EINVAL;
+	}
+
+	if (cbfn != NULL)
+		return 0;
+
+	return csio_wr_eq_cfg_rsp(hw, mbp, eq_idx);
+}
+
+/*
+ * csio_wr_iq_destroy_rsp - Response handler for IQ removal.
+ * @hw: The HW module.
+ * @mbp: Mailbox.
+ * @iq_idx: Ingress queue that was freed.
+ *
+ * Handle FW_IQ_CMD (free) mailbox completion.
+ */
+static int
+csio_wr_iq_destroy_rsp(struct csio_hw *hw, struct csio_mb *mbp, int iq_idx)
+{
+	enum fw_retval retval = csio_mb_fw_retval(mbp);
+	int rv = 0;
+
+	if (retval != FW_SUCCESS)
+		rv = -EINVAL;
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return rv;
+}
+
+/*
+ * csio_wr_iq_destroy - Free an ingress queue.
+ * @hw: The HW module.
+ * @priv: Private data object.
+ * @iq_idx: Ingress queue index to destroy
+ * @cbfn: Completion callback.
+ *
+ * This API frees an ingress queue by issuing the FW_IQ_CMD
+ * with the free bit set.
+ */
+static int
+csio_wr_iq_destroy(struct csio_hw *hw, void *priv, int iq_idx,
+		   void (*cbfn)(struct csio_hw *, struct csio_mb *))
+{
+	int rv = 0;
+	struct csio_mb  *mbp;
+	struct csio_iq_params iqp;
+	int flq_idx;
+
+	memset(&iqp, 0, sizeof(struct csio_iq_params));
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp)
+		return -ENOMEM;
+
+	iqp.pfn		= hw->pfn;
+	iqp.vfn		= 0;
+	iqp.iqid	= csio_q_iqid(hw, iq_idx);
+	iqp.type	= FW_IQ_TYPE_FL_INT_CAP;
+
+	flq_idx = csio_q_iq_flq_idx(hw, iq_idx);
+	if (flq_idx != -1)
+		iqp.fl0id = csio_q_flid(hw, flq_idx);
+	else
+		iqp.fl0id = 0xFFFF;
+
+	iqp.fl1id = 0xFFFF;
+
+	csio_mb_iq_free(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &iqp, cbfn);
+
+	rv = csio_mb_issue(hw, mbp);
+	if (rv != 0) {
+		mempool_free(mbp, hw->mb_mempool);
+		return rv;
+	}
+
+	if (cbfn != NULL)
+		return 0;
+
+	return csio_wr_iq_destroy_rsp(hw, mbp, iq_idx);
+}
+
+/*
+ * csio_wr_eq_destroy_rsp - Response handler for OFLD EQ creation.
+ * @hw: The HW module.
+ * @mbp: Mailbox.
+ * @eq_idx: Egress queue that was freed.
+ *
+ * Handle FW_OFLD_EQ_CMD (free) mailbox completion.
+ */
+static int
+csio_wr_eq_destroy_rsp(struct csio_hw *hw, struct csio_mb *mbp, int eq_idx)
+{
+	enum fw_retval retval = csio_mb_fw_retval(mbp);
+	int rv = 0;
+
+	if (retval != FW_SUCCESS)
+		rv = -EINVAL;
+
+	mempool_free(mbp, hw->mb_mempool);
+
+	return rv;
+}
+
+/*
+ * csio_wr_eq_destroy - Free an Egress queue.
+ * @hw: The HW module.
+ * @priv: Private data object.
+ * @eq_idx: Egress queue index to destroy
+ * @cbfn: Completion callback.
+ *
+ * This API frees an Egress queue by issuing the FW_EQ_OFLD_CMD
+ * with the free bit set.
+ */
+static int
+csio_wr_eq_destroy(struct csio_hw *hw, void *priv, int eq_idx,
+		   void (*cbfn) (struct csio_hw *, struct csio_mb *))
+{
+	int rv = 0;
+	struct csio_mb  *mbp;
+	struct csio_eq_params eqp;
+
+	memset(&eqp, 0, sizeof(struct csio_eq_params));
+
+	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
+	if (!mbp)
+		return -ENOMEM;
+
+	eqp.pfn		= hw->pfn;
+	eqp.vfn		= 0;
+	eqp.eqid	= csio_q_eqid(hw, eq_idx);
+
+	csio_mb_eq_ofld_free(hw, mbp, priv, CSIO_MB_DEFAULT_TMO, &eqp, cbfn);
+
+	rv = csio_mb_issue(hw, mbp);
+	if (rv != 0) {
+		mempool_free(mbp, hw->mb_mempool);
+		return rv;
+	}
+
+	if (cbfn != NULL)
+		return 0;
+
+	return csio_wr_eq_destroy_rsp(hw, mbp, eq_idx);
+}
+
+/*
+ * csio_wr_cleanup_eq_stpg - Cleanup Egress queue status page
+ * @hw: HW module
+ * @qidx: Egress queue index
+ *
+ * Cleanup the Egress queue status page.
+ */
+static void
+csio_wr_cleanup_eq_stpg(struct csio_hw *hw, int qidx)
+{
+	struct csio_q	*q = csio_hw_to_wrm(hw)->q_arr[qidx];
+	struct csio_qstatus_page *stp = (struct csio_qstatus_page *)q->vwrap;
+
+	memset(stp, 0, sizeof(*stp));
+}
+
+/*
+ * csio_wr_cleanup_iq_ftr - Cleanup Footer entries in IQ
+ * @hw: HW module
+ * @qidx: Ingress queue index
+ *
+ * Cleanup the footer entries in the given ingress queue,
+ * set to 1 the internal copy of genbit.
+ */
+static void
+csio_wr_cleanup_iq_ftr(struct csio_hw *hw, int qidx)
+{
+	struct csio_wrm *wrm	= csio_hw_to_wrm(hw);
+	struct csio_q	*q	= wrm->q_arr[qidx];
+	void *wr;
+	struct csio_iqwr_footer *ftr;
+	uint32_t i = 0;
+
+	/* set to 1 since we are just about zero out genbit */
+	q->un.iq.genbit = 1;
+
+	for (i = 0; i < q->credits; i++) {
+		/* Get the WR */
+		wr = (void *)((uintptr_t)q->vstart +
+					   (i * q->wr_sz));
+		/* Get the footer */
+		ftr = (struct csio_iqwr_footer *)((uintptr_t)wr +
+					  (q->wr_sz - sizeof(*ftr)));
+		/* Zero out footer */
+		memset(ftr, 0, sizeof(*ftr));
+	}
+}
+
+int
+csio_wr_destroy_queues(struct csio_hw *hw, bool cmd)
+{
+	int i, flq_idx;
+	struct csio_q *q;
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	int rv;
+
+	for (i = 0; i < wrm->free_qidx; i++) {
+		q = wrm->q_arr[i];
+
+		switch (q->type) {
+		case CSIO_EGRESS:
+			if (csio_q_eqid(hw, i) != CSIO_MAX_QID) {
+				csio_wr_cleanup_eq_stpg(hw, i);
+				if (!cmd) {
+					csio_q_eqid(hw, i) = CSIO_MAX_QID;
+					continue;
+				}
+
+				rv = csio_wr_eq_destroy(hw, NULL, i, NULL);
+				if ((rv == -EBUSY) || (rv == -ETIMEDOUT))
+					cmd = false;
+
+				csio_q_eqid(hw, i) = CSIO_MAX_QID;
+			}
+		case CSIO_INGRESS:
+			if (csio_q_iqid(hw, i) != CSIO_MAX_QID) {
+				csio_wr_cleanup_iq_ftr(hw, i);
+				if (!cmd) {
+					csio_q_iqid(hw, i) = CSIO_MAX_QID;
+					flq_idx = csio_q_iq_flq_idx(hw, i);
+					if (flq_idx != -1)
+						csio_q_flid(hw, flq_idx) =
+								CSIO_MAX_QID;
+					continue;
+				}
+
+				rv = csio_wr_iq_destroy(hw, NULL, i, NULL);
+				if ((rv == -EBUSY) || (rv == -ETIMEDOUT))
+					cmd = false;
+
+				csio_q_iqid(hw, i) = CSIO_MAX_QID;
+				flq_idx = csio_q_iq_flq_idx(hw, i);
+				if (flq_idx != -1)
+					csio_q_flid(hw, flq_idx) = CSIO_MAX_QID;
+			}
+		default:
+			break;
+		}
+	}
+
+	hw->flags &= ~CSIO_HWF_Q_FW_ALLOCED;
+
+	return 0;
+}
+
+/*
+ * csio_wr_get - Get requested size of WR entry/entries from queue.
+ * @hw: HW module.
+ * @qidx: Index of queue.
+ * @size: Cumulative size of Work request(s).
+ * @wrp: Work request pair.
+ *
+ * If requested credits are available, return the start address of the
+ * work request in the work request pair. Set pidx accordingly and
+ * return.
+ *
+ * NOTE about WR pair:
+ * ==================
+ * A WR can start towards the end of a queue, and then continue at the
+ * beginning, since the queue is considered to be circular. This will
+ * require a pair of address/size to be passed back to the caller -
+ * hence Work request pair format.
+ */
+int
+csio_wr_get(struct csio_hw *hw, int qidx, uint32_t size,
+	    struct csio_wr_pair *wrp)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_q *q = wrm->q_arr[qidx];
+	void *cwr = (void *)((uintptr_t)(q->vstart) +
+						(q->pidx * CSIO_QCREDIT_SZ));
+	struct csio_qstatus_page *stp = (struct csio_qstatus_page *)q->vwrap;
+	uint16_t cidx = q->cidx = ntohs(stp->cidx);
+	uint16_t pidx = q->pidx;
+	uint32_t req_sz	= ALIGN(size, CSIO_QCREDIT_SZ);
+	int req_credits	= req_sz / CSIO_QCREDIT_SZ;
+	int credits;
+
+	CSIO_DB_ASSERT(q->owner != NULL);
+	CSIO_DB_ASSERT((qidx >= 0) && (qidx < wrm->free_qidx));
+	CSIO_DB_ASSERT(cidx <= q->credits);
+
+	/* Calculate credits */
+	if (pidx > cidx) {
+		credits = q->credits - (pidx - cidx) - 1;
+	} else if (cidx > pidx) {
+		credits = cidx - pidx - 1;
+	} else {
+		/* cidx == pidx, empty queue */
+		credits = q->credits;
+		CSIO_INC_STATS(q, n_qempty);
+	}
+
+	/*
+	 * Check if we have enough credits.
+	 * credits = 1 implies queue is full.
+	 */
+	if (!credits || (req_credits > credits)) {
+		CSIO_INC_STATS(q, n_qfull);
+		return -EBUSY;
+	}
+
+	/*
+	 * If we are here, we have enough credits to satisfy the
+	 * request. Check if we are near the end of q, and if WR spills over.
+	 * If it does, use the first addr/size to cover the queue until
+	 * the end. Fit the remainder portion of the request at the top
+	 * of queue and return it in the second addr/len. Set pidx
+	 * accordingly.
+	 */
+	if (unlikely(((uintptr_t)cwr + req_sz) > (uintptr_t)(q->vwrap))) {
+		wrp->addr1 = cwr;
+		wrp->size1 = (uint32_t)((uintptr_t)q->vwrap - (uintptr_t)cwr);
+		wrp->addr2 = q->vstart;
+		wrp->size2 = req_sz - wrp->size1;
+		q->pidx	= (uint16_t)(ALIGN(wrp->size2, CSIO_QCREDIT_SZ) /
+							CSIO_QCREDIT_SZ);
+		CSIO_INC_STATS(q, n_qwrap);
+		CSIO_INC_STATS(q, n_eq_wr_split);
+	} else {
+		wrp->addr1 = cwr;
+		wrp->size1 = req_sz;
+		wrp->addr2 = NULL;
+		wrp->size2 = 0;
+		q->pidx	+= (uint16_t)req_credits;
+
+		/* We are the end of queue, roll back pidx to top of queue */
+		if (unlikely(q->pidx == q->credits)) {
+			q->pidx = 0;
+			CSIO_INC_STATS(q, n_qwrap);
+		}
+	}
+
+	q->inc_idx = (uint16_t)req_credits;
+
+	CSIO_INC_STATS(q, n_tot_reqs);
+
+	return 0;
+}
+
+/*
+ * csio_wr_copy_to_wrp - Copies given data into WR.
+ * @data_buf - Data buffer
+ * @wrp - Work request pair.
+ * @wr_off - Work request offset.
+ * @data_len - Data length.
+ *
+ * Copies the given data in Work Request. Work request pair(wrp) specifies
+ * address information of Work request.
+ * Returns: none
+ */
+void
+csio_wr_copy_to_wrp(void *data_buf, struct csio_wr_pair *wrp,
+		   uint32_t wr_off, uint32_t data_len)
+{
+	uint32_t nbytes;
+
+	/* Number of space available in buffer addr1 of WRP */
+	nbytes = ((wrp->size1 - wr_off) >= data_len) ?
+					data_len : (wrp->size1 - wr_off);
+
+	memcpy((uint8_t *) wrp->addr1 + wr_off, data_buf, nbytes);
+	data_len -= nbytes;
+
+	/* Write the remaining data from the begining of circular buffer */
+	if (data_len) {
+		CSIO_DB_ASSERT(data_len <= wrp->size2);
+		CSIO_DB_ASSERT(wrp->addr2 != NULL);
+		memcpy(wrp->addr2, (uint8_t *) data_buf + nbytes, data_len);
+	}
+}
+
+/*
+ * csio_wr_issue - Notify chip of Work request.
+ * @hw: HW module.
+ * @qidx: Index of queue.
+ * @prio: 0: Low priority, 1: High priority
+ *
+ * Rings the SGE Doorbell by writing the current producer index of the passed
+ * in queue into the register.
+ *
+ */
+int
+csio_wr_issue(struct csio_hw *hw, int qidx, bool prio)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_q *q = wrm->q_arr[qidx];
+
+	CSIO_DB_ASSERT((qidx >= 0) && (qidx < wrm->free_qidx));
+
+	wmb();
+	/* Ring SGE Doorbell writing q->pidx into it */
+	csio_wr_reg32(hw, DBPRIO(prio) | QID(q->un.eq.physeqid) |
+		      PIDX(q->inc_idx), MYPF_REG(SGE_PF_KDOORBELL));
+	q->inc_idx = 0;
+
+	return 0;
+}
+
+static inline uint32_t
+csio_wr_avail_qcredits(struct csio_q *q)
+{
+	if (q->pidx > q->cidx)
+		return q->pidx - q->cidx;
+	else if (q->cidx > q->pidx)
+		return q->credits - (q->cidx - q->pidx);
+	else
+		return 0;	/* cidx == pidx, empty queue */
+}
+
+/*
+ * csio_wr_inval_flq_buf - Invalidate a free list buffer entry.
+ * @hw: HW module.
+ * @flq: The freelist queue.
+ *
+ * Invalidate the driver's version of a freelist buffer entry,
+ * without freeing the associated the DMA memory. The entry
+ * to be invalidated is picked up from the current Free list
+ * queue cidx.
+ *
+ */
+static inline void
+csio_wr_inval_flq_buf(struct csio_hw *hw, struct csio_q *flq)
+{
+	flq->cidx++;
+	if (flq->cidx == flq->credits) {
+		flq->cidx = 0;
+		CSIO_INC_STATS(flq, n_qwrap);
+	}
+}
+
+/*
+ * csio_wr_process_fl - Process a freelist completion.
+ * @hw: HW module.
+ * @q: The ingress queue attached to the Freelist.
+ * @wr: The freelist completion WR in the ingress queue.
+ * @len_to_qid: The lower 32-bits of the first flit of the RSP footer
+ * @iq_handler: Caller's handler for this completion.
+ * @priv: Private pointer of caller
+ *
+ */
+static inline void
+csio_wr_process_fl(struct csio_hw *hw, struct csio_q *q,
+		   void *wr, uint32_t len_to_qid,
+		   void (*iq_handler)(struct csio_hw *, void *,
+				      uint32_t, struct csio_fl_dma_buf *,
+				      void *),
+		   void *priv)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+	struct csio_fl_dma_buf flb;
+	struct csio_dma_buf *buf, *fbuf;
+	uint32_t bufsz, len, lastlen = 0;
+	int n;
+	struct csio_q *flq = hw->wrm.q_arr[q->un.iq.flq_idx];
+
+	CSIO_DB_ASSERT(flq != NULL);
+
+	len = len_to_qid;
+
+	if (len & IQWRF_NEWBUF) {
+		if (flq->un.fl.offset > 0) {
+			csio_wr_inval_flq_buf(hw, flq);
+			flq->un.fl.offset = 0;
+		}
+		len = IQWRF_LEN_GET(len);
+	}
+
+	CSIO_DB_ASSERT(len != 0);
+
+	flb.totlen = len;
+
+	/* Consume all freelist buffers used for len bytes */
+	for (n = 0, fbuf = flb.flbufs; ; n++, fbuf++) {
+		buf = &flq->un.fl.bufs[flq->cidx];
+		bufsz = csio_wr_fl_bufsz(sge, buf);
+
+		fbuf->paddr	= buf->paddr;
+		fbuf->vaddr	= buf->vaddr;
+
+		flb.offset	= flq->un.fl.offset;
+		lastlen		= min(bufsz, len);
+		fbuf->len	= lastlen;
+
+		len -= lastlen;
+		if (!len)
+			break;
+		csio_wr_inval_flq_buf(hw, flq);
+	}
+
+	flb.defer_free = flq->un.fl.packen ? 0 : 1;
+
+	iq_handler(hw, wr, q->wr_sz - sizeof(struct csio_iqwr_footer),
+		   &flb, priv);
+
+	if (flq->un.fl.packen)
+		flq->un.fl.offset += ALIGN(lastlen, sge->csio_fl_align);
+	else
+		csio_wr_inval_flq_buf(hw, flq);
+
+}
+
+/*
+ * csio_is_new_iqwr - Is this a new Ingress queue entry ?
+ * @q: Ingress quueue.
+ * @ftr: Ingress queue WR SGE footer.
+ *
+ * The entry is new if our generation bit matches the corresponding
+ * bit in the footer of the current WR.
+ */
+static inline bool
+csio_is_new_iqwr(struct csio_q *q, struct csio_iqwr_footer *ftr)
+{
+	return (q->un.iq.genbit == (ftr->u.type_gen >> IQWRF_GEN_SHIFT));
+}
+
+/*
+ * csio_wr_process_iq - Process elements in Ingress queue.
+ * @hw:  HW pointer
+ * @qidx: Index of queue
+ * @iq_handler: Handler for this queue
+ * @priv: Caller's private pointer
+ *
+ * This routine walks through every entry of the ingress queue, calling
+ * the provided iq_handler with the entry, until the generation bit
+ * flips.
+ */
+int
+csio_wr_process_iq(struct csio_hw *hw, struct csio_q *q,
+		   void (*iq_handler)(struct csio_hw *, void *,
+				      uint32_t, struct csio_fl_dma_buf *,
+				      void *),
+		   void *priv)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	void *wr = (void *)((uintptr_t)q->vstart + (q->cidx * q->wr_sz));
+	struct csio_iqwr_footer *ftr;
+	uint32_t wr_type, fw_qid, qid;
+	struct csio_q *q_completed;
+	struct csio_q *flq = csio_iq_has_fl(q) ?
+					wrm->q_arr[q->un.iq.flq_idx] : NULL;
+	int rv = 0;
+
+	/* Get the footer */
+	ftr = (struct csio_iqwr_footer *)((uintptr_t)wr +
+					  (q->wr_sz - sizeof(*ftr)));
+
+	/*
+	 * When q wrapped around last time, driver should have inverted
+	 * ic.genbit as well.
+	 */
+	while (csio_is_new_iqwr(q, ftr)) {
+
+		CSIO_DB_ASSERT(((uintptr_t)wr + q->wr_sz) <=
+						(uintptr_t)q->vwrap);
+		rmb();
+		wr_type = IQWRF_TYPE_GET(ftr->u.type_gen);
+
+		switch (wr_type) {
+		case X_RSPD_TYPE_CPL:
+			/* Subtract footer from WR len */
+			iq_handler(hw, wr, q->wr_sz - sizeof(*ftr), NULL, priv);
+			break;
+		case X_RSPD_TYPE_FLBUF:
+			csio_wr_process_fl(hw, q, wr,
+					   ntohl(ftr->pldbuflen_qid),
+					   iq_handler, priv);
+			break;
+		case X_RSPD_TYPE_INTR:
+			fw_qid = ntohl(ftr->pldbuflen_qid);
+			qid = fw_qid - wrm->fw_iq_start;
+			q_completed = hw->wrm.intr_map[qid];
+
+			if (unlikely(qid ==
+					csio_q_physiqid(hw, hw->intr_iq_idx))) {
+				/*
+				 * We are already in the Forward Interrupt
+				 * Interrupt Queue Service! Do-not service
+				 * again!
+				 *
+				 */
+			} else {
+				CSIO_DB_ASSERT(q_completed);
+				CSIO_DB_ASSERT(
+					q_completed->un.iq.iq_intx_handler);
+
+				/* Call the queue handler. */
+				q_completed->un.iq.iq_intx_handler(hw, NULL,
+						0, NULL, (void *)q_completed);
+			}
+			break;
+		default:
+			csio_warn(hw, "Unknown resp type 0x%x received\n",
+				 wr_type);
+			CSIO_INC_STATS(q, n_rsp_unknown);
+			break;
+		}
+
+		/*
+		 * Ingress *always* has fixed size WR entries. Therefore,
+		 * there should always be complete WRs towards the end of
+		 * queue.
+		 */
+		if (((uintptr_t)wr + q->wr_sz) == (uintptr_t)q->vwrap) {
+
+			/* Roll over to start of queue */
+			q->cidx = 0;
+			wr	= q->vstart;
+
+			/* Toggle genbit */
+			q->un.iq.genbit ^= 0x1;
+
+			CSIO_INC_STATS(q, n_qwrap);
+		} else {
+			q->cidx++;
+			wr	= (void *)((uintptr_t)(q->vstart) +
+					   (q->cidx * q->wr_sz));
+		}
+
+		ftr = (struct csio_iqwr_footer *)((uintptr_t)wr +
+						  (q->wr_sz - sizeof(*ftr)));
+		q->inc_idx++;
+
+	} /* while (q->un.iq.genbit == hdr->genbit) */
+
+	/*
+	 * We need to re-arm SGE interrupts in case we got a stray interrupt,
+	 * especially in msix mode. With INTx, this may be a common occurence.
+	 */
+	if (unlikely(!q->inc_idx)) {
+		CSIO_INC_STATS(q, n_stray_comp);
+		rv = -EINVAL;
+		goto restart;
+	}
+
+	/* Replenish free list buffers if pending falls below low water mark */
+	if (flq) {
+		uint32_t avail  = csio_wr_avail_qcredits(flq);
+		if (avail <= 16) {
+			/* Make sure in FLQ, atleast 1 credit (8 FL buffers)
+			 * remains unpopulated otherwise HW thinks
+			 * FLQ is empty.
+			 */
+			csio_wr_update_fl(hw, flq, (flq->credits - 8) - avail);
+			csio_wr_ring_fldb(hw, flq);
+		}
+	}
+
+restart:
+	/* Now inform SGE about our incremental index value */
+	csio_wr_reg32(hw, CIDXINC(q->inc_idx)		|
+			  INGRESSQID(q->un.iq.physiqid)	|
+			  TIMERREG(csio_sge_timer_reg),
+			  MYPF_REG(SGE_PF_GTS));
+	q->stats.n_tot_rsps += q->inc_idx;
+
+	q->inc_idx = 0;
+
+	return rv;
+}
+
+int
+csio_wr_process_iq_idx(struct csio_hw *hw, int qidx,
+		   void (*iq_handler)(struct csio_hw *, void *,
+				      uint32_t, struct csio_fl_dma_buf *,
+				      void *),
+		   void *priv)
+{
+	struct csio_wrm *wrm	= csio_hw_to_wrm(hw);
+	struct csio_q	*iq	= wrm->q_arr[qidx];
+
+	return csio_wr_process_iq(hw, iq, iq_handler, priv);
+}
+
+static int
+csio_closest_timer(struct csio_sge *s, int time)
+{
+	int i, delta, match = 0, min_delta = INT_MAX;
+
+	for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
+		delta = time - s->timer_val[i];
+		if (delta < 0)
+			delta = -delta;
+		if (delta < min_delta) {
+			min_delta = delta;
+			match = i;
+		}
+	}
+	return match;
+}
+
+static int
+csio_closest_thresh(struct csio_sge *s, int cnt)
+{
+	int i, delta, match = 0, min_delta = INT_MAX;
+
+	for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
+		delta = cnt - s->counter_val[i];
+		if (delta < 0)
+			delta = -delta;
+		if (delta < min_delta) {
+			min_delta = delta;
+			match = i;
+		}
+	}
+	return match;
+}
+
+static void
+csio_wr_fixup_host_params(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+	uint32_t clsz = L1_CACHE_BYTES;
+	uint32_t s_hps = PAGE_SHIFT - 10;
+	uint32_t ingpad = 0;
+	uint32_t stat_len = clsz > 64 ? 128 : 64;
+
+	csio_wr_reg32(hw, HOSTPAGESIZEPF0(s_hps) | HOSTPAGESIZEPF1(s_hps) |
+		      HOSTPAGESIZEPF2(s_hps) | HOSTPAGESIZEPF3(s_hps) |
+		      HOSTPAGESIZEPF4(s_hps) | HOSTPAGESIZEPF5(s_hps) |
+		      HOSTPAGESIZEPF6(s_hps) | HOSTPAGESIZEPF7(s_hps),
+		      SGE_HOST_PAGE_SIZE);
+
+	sge->csio_fl_align = clsz < 32 ? 32 : clsz;
+	ingpad = ilog2(sge->csio_fl_align) - 5;
+
+	csio_set_reg_field(hw, SGE_CONTROL, INGPADBOUNDARY_MASK |
+					    EGRSTATUSPAGESIZE(1),
+			   INGPADBOUNDARY(ingpad) |
+			   EGRSTATUSPAGESIZE(stat_len != 64));
+
+	/* FL BUFFER SIZE#0 is Page size i,e already aligned to cache line */
+	csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0);
+	csio_wr_reg32(hw,
+		      (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2) +
+		      sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
+		      SGE_FL_BUFFER_SIZE2);
+	csio_wr_reg32(hw,
+		      (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3) +
+		      sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
+		      SGE_FL_BUFFER_SIZE3);
+
+	csio_wr_reg32(hw, HPZ0(PAGE_SHIFT - 12), ULP_RX_TDDP_PSZ);
+
+	/* default value of rx_dma_offset of the NIC driver */
+	csio_set_reg_field(hw, SGE_CONTROL, PKTSHIFT_MASK,
+			   PKTSHIFT(CSIO_SGE_RX_DMA_OFFSET));
+}
+
+static void
+csio_init_intr_coalesce_parms(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+
+	csio_sge_thresh_reg = csio_closest_thresh(sge, csio_intr_coalesce_cnt);
+	if (csio_intr_coalesce_cnt) {
+		csio_sge_thresh_reg = 0;
+		csio_sge_timer_reg = X_TIMERREG_RESTART_COUNTER;
+		return;
+	}
+
+	csio_sge_timer_reg = csio_closest_timer(sge, csio_intr_coalesce_time);
+}
+
+/*
+ * csio_wr_get_sge - Get SGE register values.
+ * @hw: HW module.
+ *
+ * Used by non-master functions and by master-functions relying on config file.
+ */
+static void
+csio_wr_get_sge(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+	uint32_t ingpad;
+	int i;
+	u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
+	u32 ingress_rx_threshold;
+
+	sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL);
+
+	ingpad = INGPADBOUNDARY_GET(sge->sge_control);
+
+	switch (ingpad) {
+	case X_INGPCIEBOUNDARY_32B:
+		sge->csio_fl_align = 32; break;
+	case X_INGPCIEBOUNDARY_64B:
+		sge->csio_fl_align = 64; break;
+	case X_INGPCIEBOUNDARY_128B:
+		sge->csio_fl_align = 128; break;
+	case X_INGPCIEBOUNDARY_256B:
+		sge->csio_fl_align = 256; break;
+	case X_INGPCIEBOUNDARY_512B:
+		sge->csio_fl_align = 512; break;
+	case X_INGPCIEBOUNDARY_1024B:
+		sge->csio_fl_align = 1024; break;
+	case X_INGPCIEBOUNDARY_2048B:
+		sge->csio_fl_align = 2048; break;
+	case X_INGPCIEBOUNDARY_4096B:
+		sge->csio_fl_align = 4096; break;
+	}
+
+	for (i = 0; i < CSIO_SGE_FL_SIZE_REGS; i++)
+		csio_get_flbuf_size(hw, sge, i);
+
+	timer_value_0_and_1 = csio_rd_reg32(hw, SGE_TIMER_VALUE_0_AND_1);
+	timer_value_2_and_3 = csio_rd_reg32(hw, SGE_TIMER_VALUE_2_AND_3);
+	timer_value_4_and_5 = csio_rd_reg32(hw, SGE_TIMER_VALUE_4_AND_5);
+
+	sge->timer_val[0] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE0_GET(timer_value_0_and_1));
+	sge->timer_val[1] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE1_GET(timer_value_0_and_1));
+	sge->timer_val[2] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE2_GET(timer_value_2_and_3));
+	sge->timer_val[3] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE3_GET(timer_value_2_and_3));
+	sge->timer_val[4] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE4_GET(timer_value_4_and_5));
+	sge->timer_val[5] = (uint16_t)csio_core_ticks_to_us(hw,
+					TIMERVALUE5_GET(timer_value_4_and_5));
+
+	ingress_rx_threshold = csio_rd_reg32(hw, SGE_INGRESS_RX_THRESHOLD);
+	sge->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold);
+	sge->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold);
+	sge->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold);
+	sge->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold);
+
+	csio_init_intr_coalesce_parms(hw);
+}
+
+/*
+ * csio_wr_set_sge - Initialize SGE registers
+ * @hw: HW module.
+ *
+ * Used by Master function to initialize SGE registers in the absence
+ * of a config file.
+ */
+static void
+csio_wr_set_sge(struct csio_hw *hw)
+{
+	struct csio_wrm *wrm = csio_hw_to_wrm(hw);
+	struct csio_sge *sge = &wrm->sge;
+	int i;
+
+	/*
+	 * Set up our basic SGE mode to deliver CPL messages to our Ingress
+	 * Queue and Packet Date to the Free List.
+	 */
+	csio_set_reg_field(hw, SGE_CONTROL, RXPKTCPLMODE(1), RXPKTCPLMODE(1));
+
+	sge->sge_control = csio_rd_reg32(hw, SGE_CONTROL);
+
+	/* sge->csio_fl_align is set up by csio_wr_fixup_host_params(). */
+
+	/*
+	 * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows
+	 * and generate an interrupt when this occurs so we can recover.
+	 */
+	csio_set_reg_field(hw, SGE_DBFIFO_STATUS,
+			   HP_INT_THRESH(HP_INT_THRESH_MASK) |
+			   LP_INT_THRESH(LP_INT_THRESH_MASK),
+			   HP_INT_THRESH(CSIO_SGE_DBFIFO_INT_THRESH) |
+			   LP_INT_THRESH(CSIO_SGE_DBFIFO_INT_THRESH));
+	csio_set_reg_field(hw, SGE_DOORBELL_CONTROL, ENABLE_DROP,
+			   ENABLE_DROP);
+
+	/* SGE_FL_BUFFER_SIZE0 is set up by csio_wr_fixup_host_params(). */
+
+	CSIO_SET_FLBUF_SIZE(hw, 1, CSIO_SGE_FLBUF_SIZE1);
+	CSIO_SET_FLBUF_SIZE(hw, 2, CSIO_SGE_FLBUF_SIZE2);
+	CSIO_SET_FLBUF_SIZE(hw, 3, CSIO_SGE_FLBUF_SIZE3);
+	CSIO_SET_FLBUF_SIZE(hw, 4, CSIO_SGE_FLBUF_SIZE4);
+	CSIO_SET_FLBUF_SIZE(hw, 5, CSIO_SGE_FLBUF_SIZE5);
+	CSIO_SET_FLBUF_SIZE(hw, 6, CSIO_SGE_FLBUF_SIZE6);
+	CSIO_SET_FLBUF_SIZE(hw, 7, CSIO_SGE_FLBUF_SIZE7);
+	CSIO_SET_FLBUF_SIZE(hw, 8, CSIO_SGE_FLBUF_SIZE8);
+
+	for (i = 0; i < CSIO_SGE_FL_SIZE_REGS; i++)
+		csio_get_flbuf_size(hw, sge, i);
+
+	/* Initialize interrupt coalescing attributes */
+	sge->timer_val[0] = CSIO_SGE_TIMER_VAL_0;
+	sge->timer_val[1] = CSIO_SGE_TIMER_VAL_1;
+	sge->timer_val[2] = CSIO_SGE_TIMER_VAL_2;
+	sge->timer_val[3] = CSIO_SGE_TIMER_VAL_3;
+	sge->timer_val[4] = CSIO_SGE_TIMER_VAL_4;
+	sge->timer_val[5] = CSIO_SGE_TIMER_VAL_5;
+
+	sge->counter_val[0] = CSIO_SGE_INT_CNT_VAL_0;
+	sge->counter_val[1] = CSIO_SGE_INT_CNT_VAL_1;
+	sge->counter_val[2] = CSIO_SGE_INT_CNT_VAL_2;
+	sge->counter_val[3] = CSIO_SGE_INT_CNT_VAL_3;
+
+	csio_wr_reg32(hw, THRESHOLD_0(sge->counter_val[0]) |
+		      THRESHOLD_1(sge->counter_val[1]) |
+		      THRESHOLD_2(sge->counter_val[2]) |
+		      THRESHOLD_3(sge->counter_val[3]),
+		      SGE_INGRESS_RX_THRESHOLD);
+
+	csio_wr_reg32(hw,
+		   TIMERVALUE0(csio_us_to_core_ticks(hw, sge->timer_val[0])) |
+		   TIMERVALUE1(csio_us_to_core_ticks(hw, sge->timer_val[1])),
+		   SGE_TIMER_VALUE_0_AND_1);
+
+	csio_wr_reg32(hw,
+		   TIMERVALUE2(csio_us_to_core_ticks(hw, sge->timer_val[2])) |
+		   TIMERVALUE3(csio_us_to_core_ticks(hw, sge->timer_val[3])),
+		   SGE_TIMER_VALUE_2_AND_3);
+
+	csio_wr_reg32(hw,
+		   TIMERVALUE4(csio_us_to_core_ticks(hw, sge->timer_val[4])) |
+		   TIMERVALUE5(csio_us_to_core_ticks(hw, sge->timer_val[5])),
+		   SGE_TIMER_VALUE_4_AND_5);
+
+	csio_init_intr_coalesce_parms(hw);
+}
+
+void
+csio_wr_sge_init(struct csio_hw *hw)
+{
+	/*
+	 * If we are master:
+	 *    - If we plan to use the config file, we need to fixup some
+	 *      host specific registers, and read the rest of the SGE
+	 *      configuration.
+	 *    - If we dont plan to use the config file, we need to initialize
+	 *      SGE entirely, including fixing the host specific registers.
+	 * If we arent the master, we are only allowed to read and work off of
+	 *      the already initialized SGE values.
+	 *
+	 * Therefore, before calling this function, we assume that the master-
+	 * ship of the card, and whether to use config file or not, have
+	 * already been decided. In other words, CSIO_HWF_USING_SOFT_PARAMS and
+	 * CSIO_HWF_MASTER should be set/unset.
+	 */
+	if (csio_is_hw_master(hw)) {
+		csio_wr_fixup_host_params(hw);
+
+		if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS)
+			csio_wr_get_sge(hw);
+		else
+			csio_wr_set_sge(hw);
+	} else
+		csio_wr_get_sge(hw);
+}
+
+/*
+ * csio_wrm_init - Initialize Work request module.
+ * @wrm: WR module
+ * @hw: HW pointer
+ *
+ * Allocates memory for an array of queue pointers starting at q_arr.
+ */
+int
+csio_wrm_init(struct csio_wrm *wrm, struct csio_hw *hw)
+{
+	int i;
+
+	if (!wrm->num_q) {
+		csio_err(hw, "Num queues is not set\n");
+		return -EINVAL;
+	}
+
+	wrm->q_arr = kzalloc(sizeof(struct csio_q *) * wrm->num_q, GFP_KERNEL);
+	if (!wrm->q_arr)
+		goto err;
+
+	for (i = 0; i < wrm->num_q; i++) {
+		wrm->q_arr[i] = kzalloc(sizeof(struct csio_q), GFP_KERNEL);
+		if (!wrm->q_arr[i]) {
+			while (--i >= 0)
+				kfree(wrm->q_arr[i]);
+			goto err_free_arr;
+		}
+	}
+	wrm->free_qidx	= 0;
+
+	return 0;
+
+err_free_arr:
+	kfree(wrm->q_arr);
+err:
+	return -ENOMEM;
+}
+
+/*
+ * csio_wrm_exit - Initialize Work request module.
+ * @wrm: WR module
+ * @hw: HW module
+ *
+ * Uninitialize WR module. Free q_arr and pointers in it.
+ * We have the additional job of freeing the DMA memory associated
+ * with the queues.
+ */
+void
+csio_wrm_exit(struct csio_wrm *wrm, struct csio_hw *hw)
+{
+	int i;
+	uint32_t j;
+	struct csio_q *q;
+	struct csio_dma_buf *buf;
+
+	for (i = 0; i < wrm->num_q; i++) {
+		q = wrm->q_arr[i];
+
+		if (wrm->free_qidx && (i < wrm->free_qidx)) {
+			if (q->type == CSIO_FREELIST) {
+				if (!q->un.fl.bufs)
+					continue;
+				for (j = 0; j < q->credits; j++) {
+					buf = &q->un.fl.bufs[j];
+					if (!buf->vaddr)
+						continue;
+					pci_free_consistent(hw->pdev, buf->len,
+							    buf->vaddr,
+							    buf->paddr);
+				}
+				kfree(q->un.fl.bufs);
+			}
+			pci_free_consistent(hw->pdev, q->size,
+					    q->vstart, q->pstart);
+		}
+		kfree(q);
+	}
+
+	hw->flags &= ~CSIO_HWF_Q_MEM_ALLOCED;
+
+	kfree(wrm->q_arr);
+}
diff --git a/drivers/scsi/csiostor/csio_wr.h b/drivers/scsi/csiostor/csio_wr.h
new file mode 100644
index 0000000..8d30e7a
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_wr.h
@@ -0,0 +1,512 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CSIO_WR_H__
+#define __CSIO_WR_H__
+
+#include <linux/cache.h>
+
+#include "csio_defs.h"
+#include "t4fw_api.h"
+#include "t4fw_api_stor.h"
+
+/*
+ * SGE register field values.
+ */
+#define X_INGPCIEBOUNDARY_32B		0
+#define X_INGPCIEBOUNDARY_64B		1
+#define X_INGPCIEBOUNDARY_128B		2
+#define X_INGPCIEBOUNDARY_256B		3
+#define X_INGPCIEBOUNDARY_512B		4
+#define X_INGPCIEBOUNDARY_1024B		5
+#define X_INGPCIEBOUNDARY_2048B		6
+#define X_INGPCIEBOUNDARY_4096B		7
+
+/* GTS register */
+#define X_TIMERREG_COUNTER0		0
+#define X_TIMERREG_COUNTER1		1
+#define X_TIMERREG_COUNTER2		2
+#define X_TIMERREG_COUNTER3		3
+#define X_TIMERREG_COUNTER4		4
+#define X_TIMERREG_COUNTER5		5
+#define X_TIMERREG_RESTART_COUNTER	6
+#define X_TIMERREG_UPDATE_CIDX		7
+
+/*
+ * Egress Context field values
+ */
+#define X_FETCHBURSTMIN_16B		0
+#define X_FETCHBURSTMIN_32B		1
+#define X_FETCHBURSTMIN_64B		2
+#define X_FETCHBURSTMIN_128B		3
+
+#define X_FETCHBURSTMAX_64B		0
+#define X_FETCHBURSTMAX_128B		1
+#define X_FETCHBURSTMAX_256B		2
+#define X_FETCHBURSTMAX_512B		3
+
+#define X_HOSTFCMODE_NONE		0
+#define X_HOSTFCMODE_INGRESS_QUEUE	1
+#define X_HOSTFCMODE_STATUS_PAGE	2
+#define X_HOSTFCMODE_BOTH		3
+
+/*
+ * Ingress Context field values
+ */
+#define X_UPDATESCHEDULING_TIMER	0
+#define X_UPDATESCHEDULING_COUNTER_OPTTIMER	1
+
+#define X_UPDATEDELIVERY_NONE		0
+#define X_UPDATEDELIVERY_INTERRUPT	1
+#define X_UPDATEDELIVERY_STATUS_PAGE	2
+#define X_UPDATEDELIVERY_BOTH		3
+
+#define X_INTERRUPTDESTINATION_PCIE	0
+#define X_INTERRUPTDESTINATION_IQ	1
+
+#define X_RSPD_TYPE_FLBUF		0
+#define X_RSPD_TYPE_CPL			1
+#define X_RSPD_TYPE_INTR		2
+
+/* WR status is at the same position as retval in a CMD header */
+#define csio_wr_status(_wr)		\
+		(FW_CMD_RETVAL_GET(ntohl(((struct fw_cmd_hdr *)(_wr))->lo)))
+
+struct csio_hw;
+
+extern int csio_intr_coalesce_cnt;
+extern int csio_intr_coalesce_time;
+
+/* Ingress queue params */
+struct csio_iq_params {
+
+	uint8_t		iq_start:1;
+	uint8_t		iq_stop:1;
+	uint8_t		pfn:3;
+
+	uint8_t		vfn;
+
+	uint16_t	physiqid;
+	uint16_t	iqid;
+
+	uint16_t	fl0id;
+	uint16_t	fl1id;
+
+	uint8_t		viid;
+
+	uint8_t		type;
+	uint8_t		iqasynch;
+	uint8_t		reserved4;
+
+	uint8_t		iqandst;
+	uint8_t		iqanus;
+	uint8_t		iqanud;
+
+	uint16_t	iqandstindex;
+
+	uint8_t		iqdroprss;
+	uint8_t		iqpciech;
+	uint8_t		iqdcaen;
+
+	uint8_t		iqdcacpu;
+	uint8_t		iqintcntthresh;
+	uint8_t		iqo;
+
+	uint8_t		iqcprio;
+	uint8_t		iqesize;
+
+	uint16_t	iqsize;
+
+	uint64_t	iqaddr;
+
+	uint8_t		iqflintiqhsen;
+	uint8_t		reserved5;
+	uint8_t		iqflintcongen;
+	uint8_t		iqflintcngchmap;
+
+	uint32_t	reserved6;
+
+	uint8_t		fl0hostfcmode;
+	uint8_t		fl0cprio;
+	uint8_t		fl0paden;
+	uint8_t		fl0packen;
+	uint8_t		fl0congen;
+	uint8_t		fl0dcaen;
+
+	uint8_t		fl0dcacpu;
+	uint8_t		fl0fbmin;
+
+	uint8_t		fl0fbmax;
+	uint8_t		fl0cidxfthresho;
+	uint8_t		fl0cidxfthresh;
+
+	uint16_t	fl0size;
+
+	uint64_t	fl0addr;
+
+	uint64_t	reserved7;
+
+	uint8_t		fl1hostfcmode;
+	uint8_t		fl1cprio;
+	uint8_t		fl1paden;
+	uint8_t		fl1packen;
+	uint8_t		fl1congen;
+	uint8_t		fl1dcaen;
+
+	uint8_t		fl1dcacpu;
+	uint8_t		fl1fbmin;
+
+	uint8_t		fl1fbmax;
+	uint8_t		fl1cidxfthresho;
+	uint8_t		fl1cidxfthresh;
+
+	uint16_t	fl1size;
+
+	uint64_t	fl1addr;
+};
+
+/* Egress queue params */
+struct csio_eq_params {
+
+	uint8_t		pfn;
+	uint8_t		vfn;
+
+	uint8_t		eqstart:1;
+	uint8_t		eqstop:1;
+
+	uint16_t        physeqid;
+	uint32_t	eqid;
+
+	uint8_t		hostfcmode:2;
+	uint8_t		cprio:1;
+	uint8_t		pciechn:3;
+
+	uint16_t	iqid;
+
+	uint8_t		dcaen:1;
+	uint8_t		dcacpu:5;
+
+	uint8_t		fbmin:3;
+	uint8_t		fbmax:3;
+
+	uint8_t		cidxfthresho:1;
+	uint8_t		cidxfthresh:3;
+
+	uint16_t	eqsize;
+
+	uint64_t	eqaddr;
+};
+
+struct csio_dma_buf {
+	struct list_head	list;
+	void			*vaddr;		/* Virtual address */
+	dma_addr_t		paddr;		/* Physical address */
+	uint32_t		len;		/* Buffer size */
+};
+
+/* Generic I/O request structure */
+struct csio_ioreq {
+	struct csio_sm		sm;		/* SM, List
+						 * should be the first member
+						 */
+	int			iq_idx;		/* Ingress queue index */
+	int			eq_idx;		/* Egress queue index */
+	uint32_t		nsge;		/* Number of SG elements */
+	uint32_t		tmo;		/* Driver timeout */
+	uint32_t		datadir;	/* Data direction */
+	struct csio_dma_buf	dma_buf;	/* Req/resp DMA buffers */
+	uint16_t		wr_status;	/* WR completion status */
+	int16_t			drv_status;	/* Driver internal status */
+	struct csio_lnode	*lnode;		/* Owner lnode */
+	struct csio_rnode	*rnode;		/* Src/destination rnode */
+	void (*io_cbfn) (struct csio_hw *, struct csio_ioreq *);
+						/* completion callback */
+	void			*scratch1;	/* Scratch area 1.
+						 */
+	void			*scratch2;	/* Scratch area 2. */
+	struct list_head	gen_list;	/* Any list associated with
+						 * this ioreq.
+						 */
+	uint64_t		fw_handle;	/* Unique handle passed
+						 * to FW
+						 */
+	uint8_t			dcopy;		/* Data copy required */
+	uint8_t			reserved1;
+	uint16_t		reserved2;
+	struct completion	cmplobj;	/* ioreq completion object */
+} ____cacheline_aligned_in_smp;
+
+/*
+ * Egress status page for egress cidx updates
+ */
+struct csio_qstatus_page {
+	__be32 qid;
+	__be16 cidx;
+	__be16 pidx;
+};
+
+
+enum {
+	CSIO_MAX_FLBUF_PER_IQWR = 4,
+	CSIO_QCREDIT_SZ  = 64,			/* pidx/cidx increments
+						 * in bytes
+						 */
+	CSIO_MAX_QID = 0xFFFF,
+	CSIO_MAX_IQ = 128,
+
+	CSIO_SGE_NTIMERS = 6,
+	CSIO_SGE_NCOUNTERS = 4,
+	CSIO_SGE_FL_SIZE_REGS = 16,
+};
+
+/* Defines for type */
+enum {
+	CSIO_EGRESS	= 1,
+	CSIO_INGRESS	= 2,
+	CSIO_FREELIST	= 3,
+};
+
+/*
+ * Structure for footer (last 2 flits) of Ingress Queue Entry.
+ */
+struct csio_iqwr_footer {
+	__be32			hdrbuflen_pidx;
+	__be32			pldbuflen_qid;
+	union {
+		u8		type_gen;
+		__be64		last_flit;
+	} u;
+};
+
+#define IQWRF_NEWBUF		(1 << 31)
+#define IQWRF_LEN_GET(x)	(((x) >> 0) & 0x7fffffffU)
+#define IQWRF_GEN_SHIFT		7
+#define IQWRF_TYPE_GET(x)	(((x) >> 4) & 0x3U)
+
+
+/*
+ * WR pair:
+ * ========
+ * A WR can start towards the end of a queue, and then continue at the
+ * beginning, since the queue is considered to be circular. This will
+ * require a pair of address/len to be passed back to the caller -
+ * hence the Work request pair structure.
+ */
+struct csio_wr_pair {
+	void			*addr1;
+	uint32_t		size1;
+	void			*addr2;
+	uint32_t		size2;
+};
+
+/*
+ * The following structure is used by ingress processing to return the
+ * free list buffers to consumers.
+ */
+struct csio_fl_dma_buf {
+	struct csio_dma_buf	flbufs[CSIO_MAX_FLBUF_PER_IQWR];
+						/* Freelist DMA buffers */
+	int			offset;		/* Offset within the
+						 * first FL buf.
+						 */
+	uint32_t		totlen;		/* Total length */
+	uint8_t			defer_free;	/* Free of buffer can
+						 * deferred
+						 */
+};
+
+/* Data-types */
+typedef void (*iq_handler_t)(struct csio_hw *, void *, uint32_t,
+			     struct csio_fl_dma_buf *, void *);
+
+struct csio_iq {
+	uint16_t		iqid;		/* Queue ID */
+	uint16_t		physiqid;	/* Physical Queue ID */
+	uint16_t		genbit;		/* Generation bit,
+						 * initially set to 1
+						 */
+	int			flq_idx;	/* Freelist queue index */
+	iq_handler_t		iq_intx_handler; /* IQ INTx handler routine */
+};
+
+struct csio_eq {
+	uint16_t		eqid;		/* Qid */
+	uint16_t		physeqid;	/* Physical Queue ID */
+	uint8_t			wrap[512];	/* Temp area for q-wrap around*/
+};
+
+struct csio_fl {
+	uint16_t		flid;		/* Qid */
+	uint16_t		packen;		/* Packing enabled? */
+	int			offset;		/* Offset within FL buf */
+	int			sreg;		/* Size register */
+	struct csio_dma_buf	*bufs;		/* Free list buffer ptr array
+						 * indexed using flq->cidx/pidx
+						 */
+};
+
+struct csio_qstats {
+	uint32_t	n_tot_reqs;		/* Total no. of Requests */
+	uint32_t	n_tot_rsps;		/* Total no. of responses */
+	uint32_t	n_qwrap;		/* Queue wraps */
+	uint32_t	n_eq_wr_split;		/* Number of split EQ WRs */
+	uint32_t	n_qentry;		/* Queue entry */
+	uint32_t	n_qempty;		/* Queue empty */
+	uint32_t	n_qfull;		/* Queue fulls */
+	uint32_t	n_rsp_unknown;		/* Unknown response type */
+	uint32_t	n_stray_comp;		/* Stray completion intr */
+	uint32_t	n_flq_refill;		/* Number of FL refills */
+};
+
+/* Queue metadata */
+struct csio_q {
+	uint16_t		type;		/* Type: Ingress/Egress/FL */
+	uint16_t		pidx;		/* producer index */
+	uint16_t		cidx;		/* consumer index */
+	uint16_t		inc_idx;	/* Incremental index */
+	uint32_t		wr_sz;		/* Size of all WRs in this q
+						 * if fixed
+						 */
+	void			*vstart;	/* Base virtual address
+						 * of queue
+						 */
+	void			*vwrap;		/* Virtual end address to
+						 * wrap around at
+						 */
+	uint32_t		credits;	/* Size of queue in credits */
+	void			*owner;		/* Owner */
+	union {					/* Queue contexts */
+		struct csio_iq	iq;
+		struct csio_eq	eq;
+		struct csio_fl	fl;
+	} un;
+
+	dma_addr_t		pstart;		/* Base physical address of
+						 * queue
+						 */
+	uint32_t		portid;		/* PCIE Channel */
+	uint32_t		size;		/* Size of queue in bytes */
+	struct csio_qstats	stats;		/* Statistics */
+} ____cacheline_aligned_in_smp;
+
+struct csio_sge {
+	uint32_t	csio_fl_align;		/* Calculated and cached
+						 * for fast path
+						 */
+	uint32_t	sge_control;		/* padding, boundaries,
+						 * lengths, etc.
+						 */
+	uint32_t	sge_host_page_size;	/* Host page size */
+	uint32_t	sge_fl_buf_size[CSIO_SGE_FL_SIZE_REGS];
+						/* free list buffer sizes */
+	uint16_t	timer_val[CSIO_SGE_NTIMERS];
+	uint8_t		counter_val[CSIO_SGE_NCOUNTERS];
+};
+
+/* Work request module */
+struct csio_wrm {
+	int			num_q;		/* Number of queues */
+	struct csio_q		**q_arr;	/* Array of queue pointers
+						 * allocated dynamically
+						 * based on configured values
+						 */
+	uint32_t		fw_iq_start;	/* Start ID of IQ for this fn*/
+	uint32_t		fw_eq_start;	/* Start ID of EQ for this fn*/
+	struct csio_q		*intr_map[CSIO_MAX_IQ];
+						/* IQ-id to IQ map table. */
+	int			free_qidx;	/* queue idx of free queue */
+	struct csio_sge		sge;		/* SGE params */
+};
+
+#define csio_get_q(__hw, __idx)		((__hw)->wrm.q_arr[__idx])
+#define	csio_q_type(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->type)
+#define	csio_q_pidx(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->pidx)
+#define	csio_q_cidx(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->cidx)
+#define	csio_q_inc_idx(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->inc_idx)
+#define	csio_q_vstart(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->vstart)
+#define	csio_q_pstart(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->pstart)
+#define	csio_q_size(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->size)
+#define	csio_q_credits(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->credits)
+#define	csio_q_portid(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->portid)
+#define	csio_q_wr_sz(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->wr_sz)
+#define	csio_q_iqid(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->un.iq.iqid)
+#define csio_q_physiqid(__hw, __idx)					\
+				((__hw)->wrm.q_arr[(__idx)]->un.iq.physiqid)
+#define csio_q_iq_flq_idx(__hw, __idx)					\
+				((__hw)->wrm.q_arr[(__idx)]->un.iq.flq_idx)
+#define	csio_q_eqid(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->un.eq.eqid)
+#define	csio_q_flid(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->un.fl.flid)
+
+#define csio_q_physeqid(__hw, __idx)					\
+				((__hw)->wrm.q_arr[(__idx)]->un.eq.physeqid)
+#define csio_iq_has_fl(__iq)		((__iq)->un.iq.flq_idx != -1)
+
+#define csio_q_iq_to_flid(__hw, __iq_idx)				\
+	csio_q_flid((__hw), (__hw)->wrm.q_arr[(__iq_qidx)]->un.iq.flq_idx)
+#define csio_q_set_intr_map(__hw, __iq_idx, __rel_iq_id)		\
+		(__hw)->wrm.intr_map[__rel_iq_id] = csio_get_q(__hw, __iq_idx)
+#define	csio_q_eq_wrap(__hw, __idx)	((__hw)->wrm.q_arr[(__idx)]->un.eq.wrap)
+
+struct csio_mb;
+
+int csio_wr_alloc_q(struct csio_hw *, uint32_t, uint32_t,
+		    uint16_t, void *, uint32_t, int, iq_handler_t);
+int csio_wr_iq_create(struct csio_hw *, void *, int,
+				uint32_t, uint8_t, bool,
+				void (*)(struct csio_hw *, struct csio_mb *));
+int csio_wr_eq_create(struct csio_hw *, void *, int, int, uint8_t,
+				void (*)(struct csio_hw *, struct csio_mb *));
+int csio_wr_destroy_queues(struct csio_hw *, bool cmd);
+
+
+int csio_wr_get(struct csio_hw *, int, uint32_t,
+			  struct csio_wr_pair *);
+void csio_wr_copy_to_wrp(void *, struct csio_wr_pair *, uint32_t, uint32_t);
+int csio_wr_issue(struct csio_hw *, int, bool);
+int csio_wr_process_iq(struct csio_hw *, struct csio_q *,
+				 void (*)(struct csio_hw *, void *,
+					  uint32_t, struct csio_fl_dma_buf *,
+					  void *),
+				 void *);
+int csio_wr_process_iq_idx(struct csio_hw *, int,
+				 void (*)(struct csio_hw *, void *,
+					  uint32_t, struct csio_fl_dma_buf *,
+					  void *),
+				 void *);
+
+void csio_wr_sge_init(struct csio_hw *);
+int csio_wrm_init(struct csio_wrm *, struct csio_hw *);
+void csio_wrm_exit(struct csio_wrm *, struct csio_hw *);
+
+#endif /* ifndef __CSIO_WR_H__ */
diff --git a/drivers/scsi/csiostor/t4fw_api_stor.h b/drivers/scsi/csiostor/t4fw_api_stor.h
new file mode 100644
index 0000000..1223e0d
--- /dev/null
+++ b/drivers/scsi/csiostor/t4fw_api_stor.h
@@ -0,0 +1,578 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _T4FW_API_STOR_H_
+#define _T4FW_API_STOR_H_
+
+
+/******************************************************************************
+ *   R E T U R N   V A L U E S
+ ********************************/
+
+enum fw_retval {
+	FW_SUCCESS		= 0,	/* completed sucessfully */
+	FW_EPERM		= 1,	/* operation not permitted */
+	FW_ENOENT		= 2,	/* no such file or directory */
+	FW_EIO			= 5,	/* input/output error; hw bad */
+	FW_ENOEXEC		= 8,	/* exec format error; inv microcode */
+	FW_EAGAIN		= 11,	/* try again */
+	FW_ENOMEM		= 12,	/* out of memory */
+	FW_EFAULT		= 14,	/* bad address; fw bad */
+	FW_EBUSY		= 16,	/* resource busy */
+	FW_EEXIST		= 17,	/* file exists */
+	FW_EINVAL		= 22,	/* invalid argument */
+	FW_ENOSPC		= 28,	/* no space left on device */
+	FW_ENOSYS		= 38,	/* functionality not implemented */
+	FW_EPROTO		= 71,	/* protocol error */
+	FW_EADDRINUSE		= 98,	/* address already in use */
+	FW_EADDRNOTAVAIL	= 99,	/* cannot assigned requested address */
+	FW_ENETDOWN		= 100,	/* network is down */
+	FW_ENETUNREACH		= 101,	/* network is unreachable */
+	FW_ENOBUFS		= 105,	/* no buffer space available */
+	FW_ETIMEDOUT		= 110,	/* timeout */
+	FW_EINPROGRESS		= 115,	/* fw internal */
+	FW_SCSI_ABORT_REQUESTED	= 128,	/* */
+	FW_SCSI_ABORT_TIMEDOUT	= 129,	/* */
+	FW_SCSI_ABORTED		= 130,	/* */
+	FW_SCSI_CLOSE_REQUESTED	= 131,	/* */
+	FW_ERR_LINK_DOWN	= 132,	/* */
+	FW_RDEV_NOT_READY	= 133,	/* */
+	FW_ERR_RDEV_LOST	= 134,	/* */
+	FW_ERR_RDEV_LOGO	= 135,	/* */
+	FW_FCOE_NO_XCHG		= 136,	/* */
+	FW_SCSI_RSP_ERR		= 137,	/* */
+	FW_ERR_RDEV_IMPL_LOGO	= 138,	/* */
+	FW_SCSI_UNDER_FLOW_ERR  = 139,	/* */
+	FW_SCSI_OVER_FLOW_ERR   = 140,	/* */
+	FW_SCSI_DDP_ERR		= 141,	/* DDP error*/
+	FW_SCSI_TASK_ERR	= 142,	/* No SCSI tasks available */
+};
+
+enum fw_fcoe_link_sub_op {
+	FCOE_LINK_DOWN	= 0x0,
+	FCOE_LINK_UP	= 0x1,
+	FCOE_LINK_COND	= 0x2,
+};
+
+enum fw_fcoe_link_status {
+	FCOE_LINKDOWN	= 0x0,
+	FCOE_LINKUP	= 0x1,
+};
+
+enum fw_ofld_prot {
+	PROT_FCOE	= 0x1,
+	PROT_ISCSI	= 0x2,
+};
+
+enum rport_type_fcoe {
+	FLOGI_VFPORT	= 0x1,		/* 0xfffffe */
+	FDISC_VFPORT	= 0x2,		/* 0xfffffe */
+	NS_VNPORT	= 0x3,		/* 0xfffffc */
+	REG_FC4_VNPORT	= 0x4,		/* any FC4 type VN_PORT */
+	REG_VNPORT	= 0x5,		/* 0xfffxxx - non FC4 port in switch */
+	FDMI_VNPORT	= 0x6,		/* 0xfffffa */
+	FAB_CTLR_VNPORT	= 0x7,		/* 0xfffffd */
+};
+
+enum event_cause_fcoe {
+	PLOGI_ACC_RCVD		= 0x01,
+	PLOGI_RJT_RCVD		= 0x02,
+	PLOGI_RCVD		= 0x03,
+	PLOGO_RCVD		= 0x04,
+	PRLI_ACC_RCVD		= 0x05,
+	PRLI_RJT_RCVD		= 0x06,
+	PRLI_RCVD		= 0x07,
+	PRLO_RCVD		= 0x08,
+	NPORT_ID_CHGD		= 0x09,
+	FLOGO_RCVD		= 0x0a,
+	CLR_VIRT_LNK_RCVD	= 0x0b,
+	FLOGI_ACC_RCVD		= 0x0c,
+	FLOGI_RJT_RCVD		= 0x0d,
+	FDISC_ACC_RCVD		= 0x0e,
+	FDISC_RJT_RCVD		= 0x0f,
+	FLOGI_TMO_MAX_RETRY	= 0x10,
+	IMPL_LOGO_ADISC_ACC	= 0x11,
+	IMPL_LOGO_ADISC_RJT	= 0x12,
+	IMPL_LOGO_ADISC_CNFLT	= 0x13,
+	PRLI_TMO		= 0x14,
+	ADISC_TMO		= 0x15,
+	RSCN_DEV_LOST		= 0x16,
+	SCR_ACC_RCVD		= 0x17,
+	ADISC_RJT_RCVD		= 0x18,
+	LOGO_SNT		= 0x19,
+	PROTO_ERR_IMPL_LOGO	= 0x1a,
+};
+
+enum fcoe_cmn_type {
+	FCOE_ELS,
+	FCOE_CT,
+	FCOE_SCSI_CMD,
+	FCOE_UNSOL_ELS,
+};
+
+enum fw_wr_stor_opcodes {
+	FW_RDEV_WR                     = 0x38,
+	FW_FCOE_ELS_CT_WR              = 0x30,
+	FW_SCSI_WRITE_WR               = 0x31,
+	FW_SCSI_READ_WR                = 0x32,
+	FW_SCSI_CMD_WR                 = 0x33,
+	FW_SCSI_ABRT_CLS_WR            = 0x34,
+};
+
+struct fw_rdev_wr {
+	__be32 op_to_immdlen;
+	__be32 alloc_to_len16;
+	__be64 cookie;
+	u8     protocol;
+	u8     event_cause;
+	u8     cur_state;
+	u8     prev_state;
+	__be32 flags_to_assoc_flowid;
+	union rdev_entry {
+		struct fcoe_rdev_entry {
+			__be32 flowid;
+			u8     protocol;
+			u8     event_cause;
+			u8     flags;
+			u8     rjt_reason;
+			u8     cur_login_st;
+			u8     prev_login_st;
+			__be16 rcv_fr_sz;
+			u8     rd_xfer_rdy_to_rport_type;
+			u8     vft_to_qos;
+			u8     org_proc_assoc_to_acc_rsp_code;
+			u8     enh_disc_to_tgt;
+			u8     wwnn[8];
+			u8     wwpn[8];
+			__be16 iqid;
+			u8     fc_oui[3];
+			u8     r_id[3];
+		} fcoe_rdev;
+		struct iscsi_rdev_entry {
+			__be32 flowid;
+			u8     protocol;
+			u8     event_cause;
+			u8     flags;
+			u8     r3;
+			__be16 iscsi_opts;
+			__be16 tcp_opts;
+			__be16 ip_opts;
+			__be16 max_rcv_len;
+			__be16 max_snd_len;
+			__be16 first_brst_len;
+			__be16 max_brst_len;
+			__be16 r4;
+			__be16 def_time2wait;
+			__be16 def_time2ret;
+			__be16 nop_out_intrvl;
+			__be16 non_scsi_to;
+			__be16 isid;
+			__be16 tsid;
+			__be16 port;
+			__be16 tpgt;
+			u8     r5[6];
+			__be16 iqid;
+		} iscsi_rdev;
+	} u;
+};
+
+#define FW_RDEV_WR_FLOWID_GET(x)	(((x) >> 8) & 0xfffff)
+#define FW_RDEV_WR_ASSOC_FLOWID_GET(x)	(((x) >> 0) & 0xfffff)
+#define FW_RDEV_WR_RPORT_TYPE_GET(x)	(((x) >> 0) & 0x1f)
+#define FW_RDEV_WR_NPIV_GET(x)		(((x) >> 6) & 0x1)
+#define FW_RDEV_WR_CLASS_GET(x)		(((x) >> 4) & 0x3)
+#define FW_RDEV_WR_TASK_RETRY_ID_GET(x)	(((x) >> 5) & 0x1)
+#define FW_RDEV_WR_RETRY_GET(x)		(((x) >> 4) & 0x1)
+#define FW_RDEV_WR_CONF_CMPL_GET(x)	(((x) >> 3) & 0x1)
+#define FW_RDEV_WR_INI_GET(x)		(((x) >> 1) & 0x1)
+#define FW_RDEV_WR_TGT_GET(x)		(((x) >> 0) & 0x1)
+
+struct fw_fcoe_els_ct_wr {
+	__be32 op_immdlen;
+	__be32 flowid_len16;
+	u64    cookie;
+	__be16 iqid;
+	u8     tmo_val;
+	u8     els_ct_type;
+	u8     ctl_pri;
+	u8     cp_en_class;
+	__be16 xfer_cnt;
+	u8     fl_to_sp;
+	u8     l_id[3];
+	u8     r5;
+	u8     r_id[3];
+	__be64 rsp_dmaaddr;
+	__be32 rsp_dmalen;
+	__be32 r6;
+};
+
+#define FW_FCOE_ELS_CT_WR_OPCODE(x)		((x) << 24)
+#define FW_FCOE_ELS_CT_WR_OPCODE_GET(x)		(((x) >> 24) & 0xff)
+#define FW_FCOE_ELS_CT_WR_IMMDLEN(x)		((x) << 0)
+#define FW_FCOE_ELS_CT_WR_IMMDLEN_GET(x)	(((x) >> 0) & 0xff)
+#define FW_FCOE_ELS_CT_WR_SP(x)			((x) << 0)
+
+struct fw_scsi_write_wr {
+	__be32 op_immdlen;
+	__be32 flowid_len16;
+	u64    cookie;
+	__be16 iqid;
+	u8     tmo_val;
+	u8     use_xfer_cnt;
+	union fw_scsi_write_priv {
+		struct fcoe_write_priv {
+			u8   ctl_pri;
+			u8   cp_en_class;
+			u8   r3_lo[2];
+		} fcoe;
+		struct iscsi_write_priv {
+			u8   r3[4];
+		} iscsi;
+	} u;
+	__be32 xfer_cnt;
+	__be32 ini_xfer_cnt;
+	__be64 rsp_dmaaddr;
+	__be32 rsp_dmalen;
+	__be32 r4;
+};
+
+#define FW_SCSI_WRITE_WR_IMMDLEN(x)	((x) << 0)
+
+struct fw_scsi_read_wr {
+	__be32 op_immdlen;
+	__be32 flowid_len16;
+	u64    cookie;
+	__be16 iqid;
+	u8     tmo_val;
+	u8     use_xfer_cnt;
+	union fw_scsi_read_priv {
+		struct fcoe_read_priv {
+			u8   ctl_pri;
+			u8   cp_en_class;
+			u8   r3_lo[2];
+		} fcoe;
+		struct iscsi_read_priv {
+			u8   r3[4];
+		} iscsi;
+	} u;
+	__be32 xfer_cnt;
+	__be32 ini_xfer_cnt;
+	__be64 rsp_dmaaddr;
+	__be32 rsp_dmalen;
+	__be32 r4;
+};
+
+#define FW_SCSI_READ_WR_IMMDLEN(x)	((x) << 0)
+
+struct fw_scsi_cmd_wr {
+	__be32 op_immdlen;
+	__be32 flowid_len16;
+	u64    cookie;
+	__be16 iqid;
+	u8     tmo_val;
+	u8     r3;
+	union fw_scsi_cmd_priv {
+		struct fcoe_cmd_priv {
+			u8   ctl_pri;
+			u8   cp_en_class;
+			u8   r4_lo[2];
+		} fcoe;
+		struct iscsi_cmd_priv {
+			u8   r4[4];
+		} iscsi;
+	} u;
+	u8     r5[8];
+	__be64 rsp_dmaaddr;
+	__be32 rsp_dmalen;
+	__be32 r6;
+};
+
+#define FW_SCSI_CMD_WR_IMMDLEN(x)	((x) << 0)
+
+#define SCSI_ABORT 0
+#define SCSI_CLOSE 1
+
+struct fw_scsi_abrt_cls_wr {
+	__be32 op_immdlen;
+	__be32 flowid_len16;
+	u64    cookie;
+	__be16 iqid;
+	u8     tmo_val;
+	u8     sub_opcode_to_chk_all_io;
+	u8     r3[4];
+	u64    t_cookie;
+};
+
+#define FW_SCSI_ABRT_CLS_WR_SUB_OPCODE(x)	((x) << 2)
+#define FW_SCSI_ABRT_CLS_WR_SUB_OPCODE_GET(x)	(((x) >> 2) & 0x3f)
+#define FW_SCSI_ABRT_CLS_WR_CHK_ALL_IO(x)	((x) << 0)
+
+enum fw_cmd_stor_opcodes {
+	FW_FCOE_RES_INFO_CMD           = 0x31,
+	FW_FCOE_LINK_CMD               = 0x32,
+	FW_FCOE_VNP_CMD                = 0x33,
+	FW_FCOE_SPARAMS_CMD            = 0x35,
+	FW_FCOE_STATS_CMD              = 0x37,
+	FW_FCOE_FCF_CMD                = 0x38,
+};
+
+struct fw_fcoe_res_info_cmd {
+	__be32 op_to_read;
+	__be32 retval_len16;
+	__be16 e_d_tov;
+	__be16 r_a_tov_seq;
+	__be16 r_a_tov_els;
+	__be16 r_r_tov;
+	__be32 max_xchgs;
+	__be32 max_ssns;
+	__be32 used_xchgs;
+	__be32 used_ssns;
+	__be32 max_fcfs;
+	__be32 max_vnps;
+	__be32 used_fcfs;
+	__be32 used_vnps;
+};
+
+struct fw_fcoe_link_cmd {
+	__be32 op_to_portid;
+	__be32 retval_len16;
+	__be32 sub_opcode_fcfi;
+	u8     r3;
+	u8     lstatus;
+	__be16 flags;
+	u8     r4;
+	u8     set_vlan;
+	__be16 vlan_id;
+	__be32 vnpi_pkd;
+	__be16 r6;
+	u8     phy_mac[6];
+	u8     vnport_wwnn[8];
+	u8     vnport_wwpn[8];
+};
+
+#define FW_FCOE_LINK_CMD_PORTID(x)	((x) << 0)
+#define FW_FCOE_LINK_CMD_PORTID_GET(x)	(((x) >> 0) & 0xf)
+#define FW_FCOE_LINK_CMD_SUB_OPCODE(x)  ((x) << 24U)
+#define FW_FCOE_LINK_CMD_FCFI(x)	((x) << 0)
+#define FW_FCOE_LINK_CMD_FCFI_GET(x)	(((x) >> 0) & 0xffffff)
+#define FW_FCOE_LINK_CMD_VNPI_GET(x)	(((x) >> 0) & 0xfffff)
+
+struct fw_fcoe_vnp_cmd {
+	__be32 op_to_fcfi;
+	__be32 alloc_to_len16;
+	__be32 gen_wwn_to_vnpi;
+	__be32 vf_id;
+	__be16 iqid;
+	u8   vnport_mac[6];
+	u8   vnport_wwnn[8];
+	u8   vnport_wwpn[8];
+	u8   cmn_srv_parms[16];
+	u8   clsp_word_0_1[8];
+};
+
+#define FW_FCOE_VNP_CMD_FCFI(x)		((x) << 0)
+#define FW_FCOE_VNP_CMD_ALLOC		(1U << 31)
+#define FW_FCOE_VNP_CMD_FREE		(1U << 30)
+#define FW_FCOE_VNP_CMD_MODIFY		(1U << 29)
+#define FW_FCOE_VNP_CMD_GEN_WWN		(1U << 22)
+#define FW_FCOE_VNP_CMD_VFID_EN		(1U << 20)
+#define FW_FCOE_VNP_CMD_VNPI(x)		((x) << 0)
+#define FW_FCOE_VNP_CMD_VNPI_GET(x)	(((x) >> 0) & 0xfffff)
+
+struct fw_fcoe_sparams_cmd {
+	__be32 op_to_portid;
+	__be32 retval_len16;
+	u8     r3[7];
+	u8     cos;
+	u8     lport_wwnn[8];
+	u8     lport_wwpn[8];
+	u8     cmn_srv_parms[16];
+	u8     cls_srv_parms[16];
+};
+
+#define FW_FCOE_SPARAMS_CMD_PORTID(x)	((x) << 0)
+
+struct fw_fcoe_stats_cmd {
+	__be32 op_to_flowid;
+	__be32 free_to_len16;
+	union fw_fcoe_stats {
+		struct fw_fcoe_stats_ctl {
+			u8   nstats_port;
+			u8   port_valid_ix;
+			__be16 r6;
+			__be32 r7;
+			__be64 stat0;
+			__be64 stat1;
+			__be64 stat2;
+			__be64 stat3;
+			__be64 stat4;
+			__be64 stat5;
+		} ctl;
+		struct fw_fcoe_port_stats {
+			__be64 tx_bcast_bytes;
+			__be64 tx_bcast_frames;
+			__be64 tx_mcast_bytes;
+			__be64 tx_mcast_frames;
+			__be64 tx_ucast_bytes;
+			__be64 tx_ucast_frames;
+			__be64 tx_drop_frames;
+			__be64 tx_offload_bytes;
+			__be64 tx_offload_frames;
+			__be64 rx_bcast_bytes;
+			__be64 rx_bcast_frames;
+			__be64 rx_mcast_bytes;
+			__be64 rx_mcast_frames;
+			__be64 rx_ucast_bytes;
+			__be64 rx_ucast_frames;
+			__be64 rx_err_frames;
+		} port_stats;
+		struct fw_fcoe_fcf_stats {
+			__be32 fip_tx_bytes;
+			__be32 fip_tx_fr;
+			__be64 fcf_ka;
+			__be64 mcast_adv_rcvd;
+			__be16 ucast_adv_rcvd;
+			__be16 sol_sent;
+			__be16 vlan_req;
+			__be16 vlan_rpl;
+			__be16 clr_vlink;
+			__be16 link_down;
+			__be16 link_up;
+			__be16 logo;
+			__be16 flogi_req;
+			__be16 flogi_rpl;
+			__be16 fdisc_req;
+			__be16 fdisc_rpl;
+			__be16 fka_prd_chg;
+			__be16 fc_map_chg;
+			__be16 vfid_chg;
+			u8   no_fka_req;
+			u8   no_vnp;
+		} fcf_stats;
+		struct fw_fcoe_pcb_stats {
+			__be64 tx_bytes;
+			__be64 tx_frames;
+			__be64 rx_bytes;
+			__be64 rx_frames;
+			__be32 vnp_ka;
+			__be32 unsol_els_rcvd;
+			__be64 unsol_cmd_rcvd;
+			__be16 implicit_logo;
+			__be16 flogi_inv_sparm;
+			__be16 fdisc_inv_sparm;
+			__be16 flogi_rjt;
+			__be16 fdisc_rjt;
+			__be16 no_ssn;
+			__be16 mac_flt_fail;
+			__be16 inv_fr_rcvd;
+		} pcb_stats;
+		struct fw_fcoe_scb_stats {
+			__be64 tx_bytes;
+			__be64 tx_frames;
+			__be64 rx_bytes;
+			__be64 rx_frames;
+			__be32 host_abrt_req;
+			__be32 adap_auto_abrt;
+			__be32 adap_abrt_rsp;
+			__be32 host_ios_req;
+			__be16 ssn_offl_ios;
+			__be16 ssn_not_rdy_ios;
+			u8   rx_data_ddp_err;
+			u8   ddp_flt_set_err;
+			__be16 rx_data_fr_err;
+			u8   bad_st_abrt_req;
+			u8   no_io_abrt_req;
+			u8   abort_tmo;
+			u8   abort_tmo_2;
+			__be32 abort_req;
+			u8   no_ppod_res_tmo;
+			u8   bp_tmo;
+			u8   adap_auto_cls;
+			u8   no_io_cls_req;
+			__be32 host_cls_req;
+			__be64 unsol_cmd_rcvd;
+			__be32 plogi_req_rcvd;
+			__be32 prli_req_rcvd;
+			__be16 logo_req_rcvd;
+			__be16 prlo_req_rcvd;
+			__be16 plogi_rjt_rcvd;
+			__be16 prli_rjt_rcvd;
+			__be32 adisc_req_rcvd;
+			__be32 rscn_rcvd;
+			__be32 rrq_req_rcvd;
+			__be32 unsol_els_rcvd;
+			u8   adisc_rjt_rcvd;
+			u8   scr_rjt;
+			u8   ct_rjt;
+			u8   inval_bls_rcvd;
+			__be32 ba_rjt_rcvd;
+		} scb_stats;
+	} u;
+};
+
+#define FW_FCOE_STATS_CMD_FLOWID(x)	((x) << 0)
+#define FW_FCOE_STATS_CMD_FREE		(1U << 30)
+#define FW_FCOE_STATS_CMD_NSTATS(x)	((x) << 4)
+#define FW_FCOE_STATS_CMD_PORT(x)	((x) << 0)
+#define FW_FCOE_STATS_CMD_PORT_VALID	(1U << 7)
+#define FW_FCOE_STATS_CMD_IX(x)		((x) << 0)
+
+struct fw_fcoe_fcf_cmd {
+	__be32 op_to_fcfi;
+	__be32 retval_len16;
+	__be16 priority_pkd;
+	u8     mac[6];
+	u8     name_id[8];
+	u8     fabric[8];
+	__be16 vf_id;
+	__be16 max_fcoe_size;
+	u8     vlan_id;
+	u8     fc_map[3];
+	__be32 fka_adv;
+	__be32 r6;
+	u8     r7_hi;
+	u8     fpma_to_portid;
+	u8     spma_mac[6];
+	__be64 r8;
+};
+
+#define FW_FCOE_FCF_CMD_FCFI(x)		((x) << 0)
+#define FW_FCOE_FCF_CMD_FCFI_GET(x)	(((x) >> 0) & 0xfffff)
+#define FW_FCOE_FCF_CMD_PRIORITY_GET(x)	(((x) >> 0) & 0xff)
+#define FW_FCOE_FCF_CMD_FPMA_GET(x)	(((x) >> 6) & 0x1)
+#define FW_FCOE_FCF_CMD_SPMA_GET(x)	(((x) >> 5) & 0x1)
+#define FW_FCOE_FCF_CMD_LOGIN_GET(x)	(((x) >> 4) & 0x1)
+#define FW_FCOE_FCF_CMD_PORTID_GET(x)	(((x) >> 0) & 0xf)
+
+#endif /* _T4FW_API_STOR_H_ */
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 192724e..138e573 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -42,7 +42,7 @@ MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx/4xxx Controller Driver");
 
 static char driver_name[] = "hptiop";
 static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver";
-static const char driver_ver[] = "v1.6 (091225)";
+static const char driver_ver[] = "v1.8";
 
 static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec);
 static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
@@ -77,6 +77,11 @@ static int iop_wait_ready_mv(struct hptiop_hba *hba, u32 millisec)
 	return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec);
 }
 
+static int iop_wait_ready_mvfrey(struct hptiop_hba *hba, u32 millisec)
+{
+	return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec);
+}
+
 static void hptiop_request_callback_itl(struct hptiop_hba *hba, u32 tag)
 {
 	if (tag & IOPMU_QUEUE_ADDR_HOST_BIT)
@@ -230,6 +235,74 @@ static int iop_intr_mv(struct hptiop_hba *hba)
 	return ret;
 }
 
+static void hptiop_request_callback_mvfrey(struct hptiop_hba *hba, u32 _tag)
+{
+	u32 req_type = _tag & 0xf;
+	struct hpt_iop_request_scsi_command *req;
+
+	switch (req_type) {
+	case IOP_REQUEST_TYPE_GET_CONFIG:
+	case IOP_REQUEST_TYPE_SET_CONFIG:
+		hba->msg_done = 1;
+		break;
+
+	case IOP_REQUEST_TYPE_SCSI_COMMAND:
+		req = hba->reqs[(_tag >> 4) & 0xff].req_virt;
+		if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT))
+			req->header.result = IOP_RESULT_SUCCESS;
+		hptiop_finish_scsi_req(hba, (_tag >> 4) & 0xff, req);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int iop_intr_mvfrey(struct hptiop_hba *hba)
+{
+	u32 _tag, status, cptr, cur_rptr;
+	int ret = 0;
+
+	if (hba->initialized)
+		writel(0, &(hba->u.mvfrey.mu->pcie_f0_int_enable));
+
+	status = readl(&(hba->u.mvfrey.mu->f0_doorbell));
+	if (status) {
+		writel(status, &(hba->u.mvfrey.mu->f0_doorbell));
+		if (status & CPU_TO_F0_DRBL_MSG_BIT) {
+			u32 msg = readl(&(hba->u.mvfrey.mu->cpu_to_f0_msg_a));
+			dprintk("received outbound msg %x\n", msg);
+			hptiop_message_callback(hba, msg);
+		}
+		ret = 1;
+	}
+
+	status = readl(&(hba->u.mvfrey.mu->isr_cause));
+	if (status) {
+		writel(status, &(hba->u.mvfrey.mu->isr_cause));
+		do {
+			cptr = *hba->u.mvfrey.outlist_cptr & 0xff;
+			cur_rptr = hba->u.mvfrey.outlist_rptr;
+			while (cur_rptr != cptr) {
+				cur_rptr++;
+				if (cur_rptr ==	hba->u.mvfrey.list_count)
+					cur_rptr = 0;
+
+				_tag = hba->u.mvfrey.outlist[cur_rptr].val;
+				BUG_ON(!(_tag & IOPMU_QUEUE_MASK_HOST_BITS));
+				hptiop_request_callback_mvfrey(hba, _tag);
+				ret = 1;
+			}
+			hba->u.mvfrey.outlist_rptr = cur_rptr;
+		} while (cptr != (*hba->u.mvfrey.outlist_cptr & 0xff));
+	}
+
+	if (hba->initialized)
+		writel(0x1010, &(hba->u.mvfrey.mu->pcie_f0_int_enable));
+
+	return ret;
+}
+
 static int iop_send_sync_request_itl(struct hptiop_hba *hba,
 					void __iomem *_req, u32 millisec)
 {
@@ -272,6 +345,26 @@ static int iop_send_sync_request_mv(struct hptiop_hba *hba,
 	return -1;
 }
 
+static int iop_send_sync_request_mvfrey(struct hptiop_hba *hba,
+					u32 size_bits, u32 millisec)
+{
+	struct hpt_iop_request_header *reqhdr =
+		hba->u.mvfrey.internal_req.req_virt;
+	u32 i;
+
+	hba->msg_done = 0;
+	reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_SYNC_REQUEST);
+	hba->ops->post_req(hba, &(hba->u.mvfrey.internal_req));
+
+	for (i = 0; i < millisec; i++) {
+		iop_intr_mvfrey(hba);
+		if (hba->msg_done)
+			break;
+		msleep(1);
+	}
+	return hba->msg_done ? 0 : -1;
+}
+
 static void hptiop_post_msg_itl(struct hptiop_hba *hba, u32 msg)
 {
 	writel(msg, &hba->u.itl.iop->inbound_msgaddr0);
@@ -285,11 +378,18 @@ static void hptiop_post_msg_mv(struct hptiop_hba *hba, u32 msg)
 	readl(&hba->u.mv.regs->inbound_doorbell);
 }
 
+static void hptiop_post_msg_mvfrey(struct hptiop_hba *hba, u32 msg)
+{
+	writel(msg, &(hba->u.mvfrey.mu->f0_to_cpu_msg_a));
+	readl(&(hba->u.mvfrey.mu->f0_to_cpu_msg_a));
+}
+
 static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec)
 {
 	u32 i;
 
 	hba->msg_done = 0;
+	hba->ops->disable_intr(hba);
 	hba->ops->post_msg(hba, msg);
 
 	for (i = 0; i < millisec; i++) {
@@ -301,6 +401,7 @@ static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec)
 		msleep(1);
 	}
 
+	hba->ops->enable_intr(hba);
 	return hba->msg_done? 0 : -1;
 }
 
@@ -354,6 +455,28 @@ static int iop_get_config_mv(struct hptiop_hba *hba,
 	return 0;
 }
 
+static int iop_get_config_mvfrey(struct hptiop_hba *hba,
+				struct hpt_iop_request_get_config *config)
+{
+	struct hpt_iop_request_get_config *info = hba->u.mvfrey.config;
+
+	if (info->header.size != sizeof(struct hpt_iop_request_get_config) ||
+			info->header.type != IOP_REQUEST_TYPE_GET_CONFIG)
+		return -1;
+
+	config->interface_version = info->interface_version;
+	config->firmware_version = info->firmware_version;
+	config->max_requests = info->max_requests;
+	config->request_size = info->request_size;
+	config->max_sg_count = info->max_sg_count;
+	config->data_transfer_length = info->data_transfer_length;
+	config->alignment_mask = info->alignment_mask;
+	config->max_devices = info->max_devices;
+	config->sdram_size = info->sdram_size;
+
+	return 0;
+}
+
 static int iop_set_config_itl(struct hptiop_hba *hba,
 				struct hpt_iop_request_set_config *config)
 {
@@ -408,6 +531,29 @@ static int iop_set_config_mv(struct hptiop_hba *hba,
 	return 0;
 }
 
+static int iop_set_config_mvfrey(struct hptiop_hba *hba,
+				struct hpt_iop_request_set_config *config)
+{
+	struct hpt_iop_request_set_config *req =
+		hba->u.mvfrey.internal_req.req_virt;
+
+	memcpy(req, config, sizeof(struct hpt_iop_request_set_config));
+	req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT);
+	req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG);
+	req->header.size =
+		cpu_to_le32(sizeof(struct hpt_iop_request_set_config));
+	req->header.result = cpu_to_le32(IOP_RESULT_PENDING);
+	req->header.context = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG<<5);
+	req->header.context_hi32 = 0;
+
+	if (iop_send_sync_request_mvfrey(hba, 0, 20000)) {
+		dprintk("Set config send cmd failed\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 static void hptiop_enable_intr_itl(struct hptiop_hba *hba)
 {
 	writel(~(IOPMU_OUTBOUND_INT_POSTQUEUE | IOPMU_OUTBOUND_INT_MSG0),
@@ -420,6 +566,13 @@ static void hptiop_enable_intr_mv(struct hptiop_hba *hba)
 		&hba->u.mv.regs->outbound_intmask);
 }
 
+static void hptiop_enable_intr_mvfrey(struct hptiop_hba *hba)
+{
+	writel(CPU_TO_F0_DRBL_MSG_BIT, &(hba->u.mvfrey.mu->f0_doorbell_enable));
+	writel(0x1, &(hba->u.mvfrey.mu->isr_enable));
+	writel(0x1010, &(hba->u.mvfrey.mu->pcie_f0_int_enable));
+}
+
 static int hptiop_initialize_iop(struct hptiop_hba *hba)
 {
 	/* enable interrupts */
@@ -502,17 +655,39 @@ static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba)
 	return 0;
 }
 
+static int hptiop_map_pci_bar_mvfrey(struct hptiop_hba *hba)
+{
+	hba->u.mvfrey.config = hptiop_map_pci_bar(hba, 0);
+	if (hba->u.mvfrey.config == NULL)
+		return -1;
+
+	hba->u.mvfrey.mu = hptiop_map_pci_bar(hba, 2);
+	if (hba->u.mvfrey.mu == NULL) {
+		iounmap(hba->u.mvfrey.config);
+		return -1;
+	}
+
+	return 0;
+}
+
 static void hptiop_unmap_pci_bar_mv(struct hptiop_hba *hba)
 {
 	iounmap(hba->u.mv.regs);
 	iounmap(hba->u.mv.mu);
 }
 
+static void hptiop_unmap_pci_bar_mvfrey(struct hptiop_hba *hba)
+{
+	iounmap(hba->u.mvfrey.config);
+	iounmap(hba->u.mvfrey.mu);
+}
+
 static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg)
 {
 	dprintk("iop message 0x%x\n", msg);
 
-	if (msg == IOPMU_INBOUND_MSG0_NOP)
+	if (msg == IOPMU_INBOUND_MSG0_NOP ||
+		msg == IOPMU_INBOUND_MSG0_RESET_COMM)
 		hba->msg_done = 1;
 
 	if (!hba->initialized)
@@ -592,6 +767,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
 		memcpy(scp->sense_buffer, &req->sg_list,
 				min_t(size_t, SCSI_SENSE_BUFFERSIZE,
 					le32_to_cpu(req->dataxfer_length)));
+		goto skip_resid;
 		break;
 
 	default:
@@ -599,6 +775,10 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
 		break;
 	}
 
+	scsi_set_resid(scp,
+		scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length));
+
+skip_resid:
 	dprintk("scsi_done(%p)\n", scp);
 	scp->scsi_done(scp);
 	free_req(hba, &hba->reqs[tag]);
@@ -692,7 +872,8 @@ static int hptiop_buildsgl(struct scsi_cmnd *scp, struct hpt_iopsg *psg)
 	BUG_ON(HPT_SCP(scp)->sgcnt > hba->max_sg_descriptors);
 
 	scsi_for_each_sg(scp, sg, HPT_SCP(scp)->sgcnt, idx) {
-		psg[idx].pci_address = cpu_to_le64(sg_dma_address(sg));
+		psg[idx].pci_address = cpu_to_le64(sg_dma_address(sg)) |
+			hba->ops->host_phy_flag;
 		psg[idx].size = cpu_to_le32(sg_dma_len(sg));
 		psg[idx].eot = (idx == HPT_SCP(scp)->sgcnt - 1) ?
 			cpu_to_le32(1) : 0;
@@ -751,6 +932,78 @@ static void hptiop_post_req_mv(struct hptiop_hba *hba,
 		MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba);
 }
 
+static void hptiop_post_req_mvfrey(struct hptiop_hba *hba,
+					struct hptiop_request *_req)
+{
+	struct hpt_iop_request_header *reqhdr = _req->req_virt;
+	u32 index;
+
+	reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT |
+			IOP_REQUEST_FLAG_ADDR_BITS |
+			((_req->req_shifted_phy >> 11) & 0xffff0000));
+	reqhdr->context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT |
+			(_req->index << 4) | reqhdr->type);
+	reqhdr->context_hi32 = cpu_to_le32((_req->req_shifted_phy << 5) &
+			0xffffffff);
+
+	hba->u.mvfrey.inlist_wptr++;
+	index = hba->u.mvfrey.inlist_wptr & 0x3fff;
+
+	if (index == hba->u.mvfrey.list_count) {
+		index = 0;
+		hba->u.mvfrey.inlist_wptr &= ~0x3fff;
+		hba->u.mvfrey.inlist_wptr ^= CL_POINTER_TOGGLE;
+	}
+
+	hba->u.mvfrey.inlist[index].addr =
+			(dma_addr_t)_req->req_shifted_phy << 5;
+	hba->u.mvfrey.inlist[index].intrfc_len = (reqhdr->size + 3) / 4;
+	writel(hba->u.mvfrey.inlist_wptr,
+		&(hba->u.mvfrey.mu->inbound_write_ptr));
+	readl(&(hba->u.mvfrey.mu->inbound_write_ptr));
+}
+
+static int hptiop_reset_comm_itl(struct hptiop_hba *hba)
+{
+	return 0;
+}
+
+static int hptiop_reset_comm_mv(struct hptiop_hba *hba)
+{
+	return 0;
+}
+
+static int hptiop_reset_comm_mvfrey(struct hptiop_hba *hba)
+{
+	u32 list_count = hba->u.mvfrey.list_count;
+
+	if (iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_RESET_COMM, 3000))
+		return -1;
+
+	/* wait 100ms for MCU ready */
+	msleep(100);
+
+	writel(cpu_to_le32(hba->u.mvfrey.inlist_phy & 0xffffffff),
+			&(hba->u.mvfrey.mu->inbound_base));
+	writel(cpu_to_le32((hba->u.mvfrey.inlist_phy >> 16) >> 16),
+			&(hba->u.mvfrey.mu->inbound_base_high));
+
+	writel(cpu_to_le32(hba->u.mvfrey.outlist_phy & 0xffffffff),
+			&(hba->u.mvfrey.mu->outbound_base));
+	writel(cpu_to_le32((hba->u.mvfrey.outlist_phy >> 16) >> 16),
+			&(hba->u.mvfrey.mu->outbound_base_high));
+
+	writel(cpu_to_le32(hba->u.mvfrey.outlist_cptr_phy & 0xffffffff),
+			&(hba->u.mvfrey.mu->outbound_shadow_base));
+	writel(cpu_to_le32((hba->u.mvfrey.outlist_cptr_phy >> 16) >> 16),
+			&(hba->u.mvfrey.mu->outbound_shadow_base_high));
+
+	hba->u.mvfrey.inlist_wptr = (list_count - 1) | CL_POINTER_TOGGLE;
+	*hba->u.mvfrey.outlist_cptr = (list_count - 1) | CL_POINTER_TOGGLE;
+	hba->u.mvfrey.outlist_rptr = list_count - 1;
+	return 0;
+}
+
 static int hptiop_queuecommand_lck(struct scsi_cmnd *scp,
 				void (*done)(struct scsi_cmnd *))
 {
@@ -771,14 +1024,15 @@ static int hptiop_queuecommand_lck(struct scsi_cmnd *scp,
 
 	_req->scp = scp;
 
-	dprintk("hptiop_queuecmd(scp=%p) %d/%d/%d/%d cdb=(%x-%x-%x) "
+	dprintk("hptiop_queuecmd(scp=%p) %d/%d/%d/%d cdb=(%08x-%08x-%08x-%08x) "
 			"req_index=%d, req=%p\n",
 			scp,
 			host->host_no, scp->device->channel,
 			scp->device->id, scp->device->lun,
-			((u32 *)scp->cmnd)[0],
-			((u32 *)scp->cmnd)[1],
-			((u32 *)scp->cmnd)[2],
+			cpu_to_be32(((u32 *)scp->cmnd)[0]),
+			cpu_to_be32(((u32 *)scp->cmnd)[1]),
+			cpu_to_be32(((u32 *)scp->cmnd)[2]),
+			cpu_to_be32(((u32 *)scp->cmnd)[3]),
 			_req->index, _req->req_virt);
 
 	scp->result = 0;
@@ -933,6 +1187,11 @@ static struct scsi_host_template driver_template = {
 	.change_queue_depth         = hptiop_adjust_disk_queue_depth,
 };
 
+static int hptiop_internal_memalloc_itl(struct hptiop_hba *hba)
+{
+	return 0;
+}
+
 static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba)
 {
 	hba->u.mv.internal_req = dma_alloc_coherent(&hba->pcidev->dev,
@@ -943,6 +1202,63 @@ static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba)
 		return -1;
 }
 
+static int hptiop_internal_memalloc_mvfrey(struct hptiop_hba *hba)
+{
+	u32 list_count = readl(&hba->u.mvfrey.mu->inbound_conf_ctl);
+	char *p;
+	dma_addr_t phy;
+
+	BUG_ON(hba->max_request_size == 0);
+
+	if (list_count == 0) {
+		BUG_ON(1);
+		return -1;
+	}
+
+	list_count >>= 16;
+
+	hba->u.mvfrey.list_count = list_count;
+	hba->u.mvfrey.internal_mem_size = 0x800 +
+			list_count * sizeof(struct mvfrey_inlist_entry) +
+			list_count * sizeof(struct mvfrey_outlist_entry) +
+			sizeof(int);
+
+	p = dma_alloc_coherent(&hba->pcidev->dev,
+			hba->u.mvfrey.internal_mem_size, &phy, GFP_KERNEL);
+	if (!p)
+		return -1;
+
+	hba->u.mvfrey.internal_req.req_virt = p;
+	hba->u.mvfrey.internal_req.req_shifted_phy = phy >> 5;
+	hba->u.mvfrey.internal_req.scp = NULL;
+	hba->u.mvfrey.internal_req.next = NULL;
+
+	p += 0x800;
+	phy += 0x800;
+
+	hba->u.mvfrey.inlist = (struct mvfrey_inlist_entry *)p;
+	hba->u.mvfrey.inlist_phy = phy;
+
+	p += list_count * sizeof(struct mvfrey_inlist_entry);
+	phy += list_count * sizeof(struct mvfrey_inlist_entry);
+
+	hba->u.mvfrey.outlist = (struct mvfrey_outlist_entry *)p;
+	hba->u.mvfrey.outlist_phy = phy;
+
+	p += list_count * sizeof(struct mvfrey_outlist_entry);
+	phy += list_count * sizeof(struct mvfrey_outlist_entry);
+
+	hba->u.mvfrey.outlist_cptr = (__le32 *)p;
+	hba->u.mvfrey.outlist_cptr_phy = phy;
+
+	return 0;
+}
+
+static int hptiop_internal_memfree_itl(struct hptiop_hba *hba)
+{
+	return 0;
+}
+
 static int hptiop_internal_memfree_mv(struct hptiop_hba *hba)
 {
 	if (hba->u.mv.internal_req) {
@@ -953,6 +1269,19 @@ static int hptiop_internal_memfree_mv(struct hptiop_hba *hba)
 		return -1;
 }
 
+static int hptiop_internal_memfree_mvfrey(struct hptiop_hba *hba)
+{
+	if (hba->u.mvfrey.internal_req.req_virt) {
+		dma_free_coherent(&hba->pcidev->dev,
+			hba->u.mvfrey.internal_mem_size,
+			hba->u.mvfrey.internal_req.req_virt,
+			(dma_addr_t)
+			hba->u.mvfrey.internal_req.req_shifted_phy << 5);
+		return 0;
+	} else
+		return -1;
+}
+
 static int __devinit hptiop_probe(struct pci_dev *pcidev,
 					const struct pci_device_id *id)
 {
@@ -1027,7 +1356,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 		goto unmap_pci_bar;
 	}
 
-	if (hba->ops->internal_memalloc) {
+	if (hba->ops->family == MV_BASED_IOP) {
 		if (hba->ops->internal_memalloc(hba)) {
 			printk(KERN_ERR "scsi%d: internal_memalloc failed\n",
 				hba->host->host_no);
@@ -1050,6 +1379,19 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 	hba->interface_version = le32_to_cpu(iop_config.interface_version);
 	hba->sdram_size = le32_to_cpu(iop_config.sdram_size);
 
+	if (hba->ops->family == MVFREY_BASED_IOP) {
+		if (hba->ops->internal_memalloc(hba)) {
+			printk(KERN_ERR "scsi%d: internal_memalloc failed\n",
+				hba->host->host_no);
+			goto unmap_pci_bar;
+		}
+		if (hba->ops->reset_comm(hba)) {
+			printk(KERN_ERR "scsi%d: reset comm failed\n",
+					hba->host->host_no);
+			goto unmap_pci_bar;
+		}
+	}
+
 	if (hba->firmware_version > 0x01020000 ||
 			hba->interface_version > 0x01020000)
 		hba->iopintf_v2 = 1;
@@ -1104,14 +1446,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 	hba->dma_coherent = start_virt;
 	hba->dma_coherent_handle = start_phy;
 
-	if ((start_phy & 0x1f) != 0)
-	{
+	if ((start_phy & 0x1f) != 0) {
 		offset = ((start_phy + 0x1f) & ~0x1f) - start_phy;
 		start_phy += offset;
 		start_virt += offset;
 	}
 
-	hba->req_list = start_virt;
+	hba->req_list = NULL;
 	for (i = 0; i < hba->max_requests; i++) {
 		hba->reqs[i].next = NULL;
 		hba->reqs[i].req_virt = start_virt;
@@ -1132,7 +1473,6 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
 		goto free_request_mem;
 	}
 
-
 	scsi_scan_host(host);
 
 	dprintk("scsi%d: hptiop_probe successfully\n", hba->host->host_no);
@@ -1147,8 +1487,7 @@ free_request_irq:
 	free_irq(hba->pcidev->irq, hba);
 
 unmap_pci_bar:
-	if (hba->ops->internal_memfree)
-		hba->ops->internal_memfree(hba);
+	hba->ops->internal_memfree(hba);
 
 	hba->ops->unmap_pci_bar(hba);
 
@@ -1198,6 +1537,16 @@ static void hptiop_disable_intr_mv(struct hptiop_hba *hba)
 	readl(&hba->u.mv.regs->outbound_intmask);
 }
 
+static void hptiop_disable_intr_mvfrey(struct hptiop_hba *hba)
+{
+	writel(0, &(hba->u.mvfrey.mu->f0_doorbell_enable));
+	readl(&(hba->u.mvfrey.mu->f0_doorbell_enable));
+	writel(0, &(hba->u.mvfrey.mu->isr_enable));
+	readl(&(hba->u.mvfrey.mu->isr_enable));
+	writel(0, &(hba->u.mvfrey.mu->pcie_f0_int_enable));
+	readl(&(hba->u.mvfrey.mu->pcie_f0_int_enable));
+}
+
 static void hptiop_remove(struct pci_dev *pcidev)
 {
 	struct Scsi_Host *host = pci_get_drvdata(pcidev);
@@ -1216,8 +1565,7 @@ static void hptiop_remove(struct pci_dev *pcidev)
 			hba->dma_coherent,
 			hba->dma_coherent_handle);
 
-	if (hba->ops->internal_memfree)
-		hba->ops->internal_memfree(hba);
+	hba->ops->internal_memfree(hba);
 
 	hba->ops->unmap_pci_bar(hba);
 
@@ -1229,9 +1577,10 @@ static void hptiop_remove(struct pci_dev *pcidev)
 }
 
 static struct hptiop_adapter_ops hptiop_itl_ops = {
+	.family            = INTEL_BASED_IOP,
 	.iop_wait_ready    = iop_wait_ready_itl,
-	.internal_memalloc = NULL,
-	.internal_memfree  = NULL,
+	.internal_memalloc = hptiop_internal_memalloc_itl,
+	.internal_memfree  = hptiop_internal_memfree_itl,
 	.map_pci_bar       = hptiop_map_pci_bar_itl,
 	.unmap_pci_bar     = hptiop_unmap_pci_bar_itl,
 	.enable_intr       = hptiop_enable_intr_itl,
@@ -1242,9 +1591,12 @@ static struct hptiop_adapter_ops hptiop_itl_ops = {
 	.post_msg          = hptiop_post_msg_itl,
 	.post_req          = hptiop_post_req_itl,
 	.hw_dma_bit_mask   = 64,
+	.reset_comm        = hptiop_reset_comm_itl,
+	.host_phy_flag     = cpu_to_le64(0),
 };
 
 static struct hptiop_adapter_ops hptiop_mv_ops = {
+	.family            = MV_BASED_IOP,
 	.iop_wait_ready    = iop_wait_ready_mv,
 	.internal_memalloc = hptiop_internal_memalloc_mv,
 	.internal_memfree  = hptiop_internal_memfree_mv,
@@ -1258,6 +1610,27 @@ static struct hptiop_adapter_ops hptiop_mv_ops = {
 	.post_msg          = hptiop_post_msg_mv,
 	.post_req          = hptiop_post_req_mv,
 	.hw_dma_bit_mask   = 33,
+	.reset_comm        = hptiop_reset_comm_mv,
+	.host_phy_flag     = cpu_to_le64(0),
+};
+
+static struct hptiop_adapter_ops hptiop_mvfrey_ops = {
+	.family            = MVFREY_BASED_IOP,
+	.iop_wait_ready    = iop_wait_ready_mvfrey,
+	.internal_memalloc = hptiop_internal_memalloc_mvfrey,
+	.internal_memfree  = hptiop_internal_memfree_mvfrey,
+	.map_pci_bar       = hptiop_map_pci_bar_mvfrey,
+	.unmap_pci_bar     = hptiop_unmap_pci_bar_mvfrey,
+	.enable_intr       = hptiop_enable_intr_mvfrey,
+	.disable_intr      = hptiop_disable_intr_mvfrey,
+	.get_config        = iop_get_config_mvfrey,
+	.set_config        = iop_set_config_mvfrey,
+	.iop_intr          = iop_intr_mvfrey,
+	.post_msg          = hptiop_post_msg_mvfrey,
+	.post_req          = hptiop_post_req_mvfrey,
+	.hw_dma_bit_mask   = 64,
+	.reset_comm        = hptiop_reset_comm_mvfrey,
+	.host_phy_flag     = cpu_to_le64(1),
 };
 
 static struct pci_device_id hptiop_id_table[] = {
@@ -1283,6 +1656,8 @@ static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
+	{ PCI_VDEVICE(TTI, 0x4520), (kernel_ulong_t)&hptiop_mvfrey_ops },
+	{ PCI_VDEVICE(TTI, 0x4522), (kernel_ulong_t)&hptiop_mvfrey_ops },
 	{},
 };
 
diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h
index baa648d..020619d 100644
--- a/drivers/scsi/hptiop.h
+++ b/drivers/scsi/hptiop.h
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -75,6 +75,45 @@ struct hpt_iopmv_regs {
 	__le32 outbound_intmask;
 };
 
+#pragma pack(1)
+struct hpt_iopmu_mvfrey {
+	__le32 reserved0[(0x4000 - 0) / 4];
+	__le32 inbound_base;
+	__le32 inbound_base_high;
+	__le32 reserved1[(0x4018 - 0x4008) / 4];
+	__le32 inbound_write_ptr;
+	__le32 reserved2[(0x402c - 0x401c) / 4];
+	__le32 inbound_conf_ctl;
+	__le32 reserved3[(0x4050 - 0x4030) / 4];
+	__le32 outbound_base;
+	__le32 outbound_base_high;
+	__le32 outbound_shadow_base;
+	__le32 outbound_shadow_base_high;
+	__le32 reserved4[(0x4088 - 0x4060) / 4];
+	__le32 isr_cause;
+	__le32 isr_enable;
+	__le32 reserved5[(0x1020c - 0x4090) / 4];
+	__le32 pcie_f0_int_enable;
+	__le32 reserved6[(0x10400 - 0x10210) / 4];
+	__le32 f0_to_cpu_msg_a;
+	__le32 reserved7[(0x10420 - 0x10404) / 4];
+	__le32 cpu_to_f0_msg_a;
+	__le32 reserved8[(0x10480 - 0x10424) / 4];
+	__le32 f0_doorbell;
+	__le32 f0_doorbell_enable;
+};
+
+struct mvfrey_inlist_entry {
+	dma_addr_t addr;
+	__le32 intrfc_len;
+	__le32 reserved;
+};
+
+struct mvfrey_outlist_entry {
+	__le32 val;
+};
+#pragma pack()
+
 #define MVIOP_MU_QUEUE_ADDR_HOST_MASK   (~(0x1full))
 #define MVIOP_MU_QUEUE_ADDR_HOST_BIT    4
 
@@ -87,6 +126,9 @@ struct hpt_iopmv_regs {
 #define MVIOP_MU_OUTBOUND_INT_MSG       1
 #define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2
 
+#define CL_POINTER_TOGGLE        0x00004000
+#define CPU_TO_F0_DRBL_MSG_BIT   0x02000000
+
 enum hpt_iopmu_message {
 	/* host-to-iop messages */
 	IOPMU_INBOUND_MSG0_NOP = 0,
@@ -95,6 +137,7 @@ enum hpt_iopmu_message {
 	IOPMU_INBOUND_MSG0_SHUTDOWN,
 	IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK,
 	IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK,
+	IOPMU_INBOUND_MSG0_RESET_COMM,
 	IOPMU_INBOUND_MSG0_MAX = 0xff,
 	/* iop-to-host messages */
 	IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100,
@@ -118,6 +161,7 @@ struct hpt_iop_request_header {
 #define IOP_REQUEST_FLAG_BIST_REQUEST 2
 #define IOP_REQUEST_FLAG_REMAPPED     4
 #define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8
+#define IOP_REQUEST_FLAG_ADDR_BITS 0x40 /* flags[31:16] is phy_addr[47:32] */
 
 enum hpt_iop_request_type {
 	IOP_REQUEST_TYPE_GET_CONFIG = 0,
@@ -223,6 +267,13 @@ struct hpt_scsi_pointer {
 
 #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp)
 
+enum hptiop_family {
+	UNKNOWN_BASED_IOP,
+	INTEL_BASED_IOP,
+	MV_BASED_IOP,
+	MVFREY_BASED_IOP
+} ;
+
 struct hptiop_hba {
 	struct hptiop_adapter_ops *ops;
 	union {
@@ -236,6 +287,22 @@ struct hptiop_hba {
 			void *internal_req;
 			dma_addr_t internal_req_phy;
 		} mv;
+		struct {
+			struct hpt_iop_request_get_config __iomem *config;
+			struct hpt_iopmu_mvfrey __iomem *mu;
+
+			int internal_mem_size;
+			struct hptiop_request internal_req;
+			int list_count;
+			struct mvfrey_inlist_entry *inlist;
+			dma_addr_t inlist_phy;
+			__le32 inlist_wptr;
+			struct mvfrey_outlist_entry *outlist;
+			dma_addr_t outlist_phy;
+			__le32 *outlist_cptr; /* copy pointer shadow */
+			dma_addr_t outlist_cptr_phy;
+			__le32 outlist_rptr;
+		} mvfrey;
 	} u;
 
 	struct Scsi_Host *host;
@@ -283,6 +350,7 @@ struct hpt_ioctl_k {
 };
 
 struct hptiop_adapter_ops {
+	enum hptiop_family family;
 	int  (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec);
 	int  (*internal_memalloc)(struct hptiop_hba *hba);
 	int  (*internal_memfree)(struct hptiop_hba *hba);
@@ -298,6 +366,8 @@ struct hptiop_adapter_ops {
 	void (*post_msg)(struct hptiop_hba *hba, u32 msg);
 	void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req);
 	int  hw_dma_bit_mask;
+	int  (*reset_comm)(struct hptiop_hba *hba);
+	__le64  host_phy_flag;
 };
 
 #define HPT_IOCTL_RESULT_OK         0
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 69b5993..df4c13a 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -689,6 +689,7 @@ struct lpfc_hba {
 #define LPFC_FCF_PRIORITY 2	/* Priority fcf failover */
 	uint32_t cfg_fcf_failover_policy;
 	uint32_t cfg_fcp_io_sched;
+	uint32_t cfg_fcp2_no_tgt_reset;
 	uint32_t cfg_cr_delay;
 	uint32_t cfg_cr_count;
 	uint32_t cfg_multi_ring_support;
@@ -714,6 +715,7 @@ struct lpfc_hba {
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_aer_support;
 	uint32_t cfg_sriov_nr_virtfn;
+	uint32_t cfg_request_firmware_upgrade;
 	uint32_t cfg_iocb_cnt;
 	uint32_t cfg_suppress_link_up;
 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index ad16e54..a364cae 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3618,6 +3618,77 @@ static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR,
 		   lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store);
 
 /**
+ * lpfc_request_firmware_store - Request for Linux generic firmware upgrade
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string the number of vfs to be enabled.
+ * @count: unused variable.
+ *
+ * Description:
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_request_firmware_upgrade_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+	struct lpfc_hba *phba = vport->phba;
+	int val = 0, rc = -EINVAL;
+
+	/* Sanity check on user data */
+	if (!isdigit(buf[0]))
+		return -EINVAL;
+	if (sscanf(buf, "%i", &val) != 1)
+		return -EINVAL;
+	if (val != 1)
+		return -EINVAL;
+
+	rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE);
+	if (rc)
+		rc = -EPERM;
+	else
+		rc = strlen(buf);
+	return rc;
+}
+
+static int lpfc_req_fw_upgrade;
+module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade");
+lpfc_param_show(request_firmware_upgrade)
+
+/**
+ * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade
+ * @phba: lpfc_hba pointer.
+ * @val: 0 or 1.
+ *
+ * Description:
+ * Set the initial Linux generic firmware upgrade enable or disable flag.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val)
+{
+	if (val >= 0 && val <= 1) {
+		phba->cfg_request_firmware_upgrade = val;
+		return 0;
+	}
+	return -EINVAL;
+}
+static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR,
+		   lpfc_request_firmware_upgrade_show,
+		   lpfc_request_firmware_upgrade_store);
+
+/**
  * lpfc_fcp_imax_store
  *
  * @dev: class device that is converted into a Scsi_host.
@@ -3788,6 +3859,16 @@ LPFC_ATTR_RW(fcp_io_sched, 0, 0, 1, "Determine scheduling algrithmn for "
 		"issuing commands [0] - Round Robin, [1] - Current CPU");
 
 /*
+# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior
+# range is [0,1]. Default value is 0.
+# For [0], bus reset issues target reset to ALL devices
+# For [1], bus reset issues target reset to non-FCP2 devices
+*/
+LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for "
+	     "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset");
+
+
+/*
 # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing
 # cr_delay (msec) or cr_count outstanding commands. cr_delay can take
 # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay
@@ -4029,6 +4110,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_scan_down,
 	&dev_attr_lpfc_link_speed,
 	&dev_attr_lpfc_fcp_io_sched,
+	&dev_attr_lpfc_fcp2_no_tgt_reset,
 	&dev_attr_lpfc_cr_delay,
 	&dev_attr_lpfc_cr_count,
 	&dev_attr_lpfc_multi_ring_support,
@@ -4069,6 +4151,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_aer_support,
 	&dev_attr_lpfc_aer_state_cleanup,
 	&dev_attr_lpfc_sriov_nr_virtfn,
+	&dev_attr_lpfc_req_fw_upgrade,
 	&dev_attr_lpfc_suppress_link_up,
 	&dev_attr_lpfc_iocb_cnt,
 	&dev_attr_iocb_hw,
@@ -5019,6 +5102,7 @@ void
 lpfc_get_cfgparam(struct lpfc_hba *phba)
 {
 	lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched);
+	lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset);
 	lpfc_cr_delay_init(phba, lpfc_cr_delay);
 	lpfc_cr_count_init(phba, lpfc_cr_count);
 	lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support);
@@ -5051,6 +5135,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
 	lpfc_aer_support_init(phba, lpfc_aer_support);
 	lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
+	lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);
 	lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
 	lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
 	phba->cfg_enable_dss = 1;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 4380a44..69d66e3 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -468,3 +468,4 @@ void lpfc_sli4_node_prep(struct lpfc_hba *);
 int lpfc_sli4_xri_sgl_update(struct lpfc_hba *);
 void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
 uint32_t lpfc_sli_port_speed_get(struct lpfc_hba *);
+int lpfc_sli4_request_firmware_update(struct lpfc_hba *, uint8_t);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 7ffabb7..65f9fb6 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -634,7 +634,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		/* Check for retry */
 		if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
 			if (irsp->ulpStatus != IOSTAT_LOCAL_REJECT ||
-			    (irsp->un.ulpWord[4] && IOERR_PARAM_MASK) !=
+			    (irsp->un.ulpWord[4] & IOERR_PARAM_MASK) !=
 			    IOERR_NO_RESOURCES)
 				vport->fc_ns_retry++;
 
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index f19e9b6..b9440de 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1182,8 +1182,6 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	sp->cmn.w2.r_a_tov = 0;
 	sp->cmn.virtual_fabric_support = 0;
 	sp->cls1.classValid = 0;
-	sp->cls2.seqDelivery = 1;
-	sp->cls3.seqDelivery = 1;
 	if (sp->cmn.fcphLow < FC_PH3)
 		sp->cmn.fcphLow = FC_PH3;
 	if (sp->cmn.fcphHigh < FC_PH3)
@@ -1198,7 +1196,13 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Set the fcfi to the fcfi we registered with */
 			elsiocb->iocb.ulpContext = phba->fcf.fcfi;
 		}
+		/* Can't do SLI4 class2 without support sequence coalescing */
+		sp->cls2.classValid = 0;
+		sp->cls2.seqDelivery = 0;
 	} else {
+		/* Historical, setting sequential-delivery bit for SLI3 */
+		sp->cls2.seqDelivery = (sp->cls2.classValid) ? 1 : 0;
+		sp->cls3.seqDelivery = (sp->cls3.classValid) ? 1 : 0;
 		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 			sp->cmn.request_multiple_Nport = 1;
 			/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 2cdeb54..a47cfbd 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3219,6 +3219,9 @@ struct wqe_common {
 #define wqe_dif_SHIFT         0
 #define wqe_dif_MASK          0x00000003
 #define wqe_dif_WORD          word7
+#define LPFC_WQE_DIF_PASSTHRU	1
+#define LPFC_WQE_DIF_STRIP	2
+#define LPFC_WQE_DIF_INSERT	3
 #define wqe_ct_SHIFT          2
 #define wqe_ct_MASK           0x00000003
 #define wqe_ct_WORD           word7
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 7dc4218..c20eec7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3854,7 +3854,7 @@ static void
 lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 {
 	char port_name;
-	char message[80];
+	char message[128];
 	uint8_t status;
 	struct lpfc_acqe_misconfigured_event *misconfigured;
 
@@ -9450,7 +9450,7 @@ lpfc_write_firmware(const struct firmware *fw, void *context)
 	struct lpfc_dmabuf *dmabuf, *next;
 	uint32_t offset = 0, temp_offset = 0;
 
-	/* It can be null, sanity check */
+	/* It can be null in no-wait mode, sanity check */
 	if (!fw) {
 		rc = -ENXIO;
 		goto out;
@@ -9528,11 +9528,48 @@ release_out:
 	release_firmware(fw);
 out:
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-			"3024 Firmware update done: %d.", rc);
+			"3024 Firmware update done: %d.\n", rc);
 	return;
 }
 
 /**
+ * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to perform Linux generic firmware upgrade on device
+ * that supports such feature.
+ **/
+int
+lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
+{
+	uint8_t file_name[ELX_MODEL_NAME_SIZE];
+	int ret;
+	const struct firmware *fw;
+
+	/* Only supported on SLI4 interface type 2 for now */
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	    LPFC_SLI_INTF_IF_TYPE_2)
+		return -EPERM;
+
+	snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp", phba->ModelName);
+
+	if (fw_upgrade == INT_FW_UPGRADE) {
+		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+					file_name, &phba->pcidev->dev,
+					GFP_KERNEL, (void *)phba,
+					lpfc_write_firmware);
+	} else if (fw_upgrade == RUN_FW_UPGRADE) {
+		ret = request_firmware(&fw, file_name, &phba->pcidev->dev);
+		if (!ret)
+			lpfc_write_firmware(fw, (void *)phba);
+	} else {
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
  * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
@@ -9560,7 +9597,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	uint32_t cfg_mode, intr_mode;
 	int mcnt;
 	int adjusted_fcp_io_channel;
-	uint8_t file_name[ELX_MODEL_NAME_SIZE];
 
 	/* Allocate memory for HBA structure */
 	phba = lpfc_hba_alloc(pdev);
@@ -9703,16 +9739,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	/* Perform post initialization setup */
 	lpfc_post_init_setup(phba);
 
-	/* check for firmware upgrade or downgrade (if_type 2 only) */
-	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
-	    LPFC_SLI_INTF_IF_TYPE_2) {
-		snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp",
-			 phba->ModelName);
-		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
-					file_name, &phba->pcidev->dev,
-					GFP_KERNEL, (void *)phba,
-					lpfc_write_firmware);
-	}
+	/* check for firmware upgrade or downgrade */
+	if (phba->cfg_request_firmware_upgrade)
+		ret = lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);
 
 	/* Check if there are static vports to be created. */
 	lpfc_create_static_vport(phba);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f45ac9..60e5a177 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3227,6 +3227,21 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 		}
 	}
 
+	switch (scsi_get_prot_op(scsi_cmnd)) {
+	case SCSI_PROT_WRITE_STRIP:
+	case SCSI_PROT_READ_STRIP:
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP;
+		break;
+	case SCSI_PROT_WRITE_INSERT:
+	case SCSI_PROT_READ_INSERT:
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT;
+		break;
+	case SCSI_PROT_WRITE_PASS:
+	case SCSI_PROT_READ_PASS:
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS;
+		break;
+	}
+
 	fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
 
 	fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
@@ -3236,7 +3251,6 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 * we need to set word 4 of IOCB here
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
-	lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF;
 
 	return 0;
 err:
@@ -4914,6 +4928,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 		list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
 			if (!NLP_CHK_NODE_ACT(ndlp))
 				continue;
+			if (vport->phba->cfg_fcp2_no_tgt_reset &&
+			    (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
+				continue;
 			if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
 			    ndlp->nlp_sid == i &&
 			    ndlp->rport) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d7f3313..624eab3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -8068,10 +8068,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
-		if (iocbq->iocb_flag & LPFC_IO_DIF) {
-			iocbq->iocb_flag &= ~LPFC_IO_DIF;
-			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
-		}
 		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		break;
 	case CMD_FCP_IREAD64_CR:
@@ -8091,10 +8087,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
-		if (iocbq->iocb_flag & LPFC_IO_DIF) {
-			iocbq->iocb_flag &= ~LPFC_IO_DIF;
-			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
-		}
 		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		break;
 	case CMD_FCP_ICMND64_CR:
@@ -8304,6 +8296,14 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		break;
 	}
 
+	if (iocbq->iocb_flag & LPFC_IO_DIF_PASS)
+		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_PASSTHRU);
+	else if (iocbq->iocb_flag & LPFC_IO_DIF_STRIP)
+		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_STRIP);
+	else if (iocbq->iocb_flag & LPFC_IO_DIF_INSERT)
+		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_INSERT);
+	iocbq->iocb_flag &= ~(LPFC_IO_DIF_PASS | LPFC_IO_DIF_STRIP |
+			      LPFC_IO_DIF_INSERT);
 	bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag);
 	bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag);
 	wqe->generic.wqe_com.abort_tag = abort_tag;
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 2f48d00..9d2e0c6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -69,7 +69,9 @@ struct lpfc_iocbq {
 #define LPFC_USE_FCPWQIDX	0x80    /* Submit to specified FCPWQ index */
 #define DSS_SECURITY_OP		0x100	/* security IO */
 #define LPFC_IO_ON_TXCMPLQ	0x200	/* The IO is still on the TXCMPLQ */
-#define LPFC_IO_DIF		0x400	/* T10 DIF IO */
+#define LPFC_IO_DIF_PASS	0x400	/* T10 DIF IO pass-thru prot */
+#define LPFC_IO_DIF_STRIP	0x800	/* T10 DIF IO strip prot */
+#define LPFC_IO_DIF_INSERT	0x1000	/* T10 DIF IO insert prot */
 
 #define LPFC_FIP_ELS_ID_MASK	0xc000	/* ELS_ID range 0-3, non-shifted mask */
 #define LPFC_FIP_ELS_ID_SHIFT	14
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index f44a06a..44c427a 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -82,6 +82,9 @@
 
 #define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
 
+#define INT_FW_UPGRADE	0
+#define RUN_FW_UPGRADE	1
+
 enum lpfc_sli4_queue_type {
 	LPFC_EQ,
 	LPFC_GCQ,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 0c21491..ba596e8 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.35"
+#define LPFC_DRIVER_VERSION "8.3.36"
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
new file mode 100644
index 0000000..81471bf
--- /dev/null
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -0,0 +1,67 @@
+#
+# Kernel configuration file for the MPT3SAS
+#
+# This code is based on drivers/scsi/mpt3sas/Kconfig
+# Copyright (C) 2012  LSI Corporation
+#  (mailto:DL-MPTFusionLinux@lsi.com)
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# NO WARRANTY
+# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+# solely responsible for determining the appropriateness of using and
+# distributing the Program and assumes all risks associated with its
+# exercise of rights under this Agreement, including but not limited to
+# the risks and costs of program errors, damage to or loss of data,
+# programs or equipment, and unavailability or interruption of operations.
+
+# DISCLAIMER OF LIABILITY
+# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+# USA.
+
+config SCSI_MPT3SAS
+	tristate "LSI MPT Fusion SAS 3.0 Device Driver"
+	depends on PCI && SCSI
+	select SCSI_SAS_ATTRS
+	select RAID_ATTRS
+	---help---
+	This driver supports PCI-Express SAS 12Gb/s Host Adapters.
+
+config SCSI_MPT3SAS_MAX_SGE
+	int "LSI MPT Fusion Max number of SG Entries (16 - 256)"
+	depends on PCI && SCSI && SCSI_MPT3SAS
+	default "128"
+	range 16 256
+	---help---
+	This option allows you to specify the maximum number of scatter-
+	gather entries per I/O. The driver default is 128, which matches
+	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
+	can be 256. However, it may decreased down to 16.  Decreasing this
+	parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT3SAS_LOGGING
+	bool "LSI MPT Fusion logging facility"
+	depends on PCI && SCSI && SCSI_MPT3SAS
+	---help---
+	This turns on a logging facility.
diff --git a/drivers/scsi/mpt3sas/Makefile b/drivers/scsi/mpt3sas/Makefile
new file mode 100644
index 0000000..4c1d2e7
--- /dev/null
+++ b/drivers/scsi/mpt3sas/Makefile
@@ -0,0 +1,8 @@
+# mpt3sas makefile
+obj-m += mpt3sas.o
+mpt3sas-y +=  mpt3sas_base.o     \
+		mpt3sas_config.o \
+		mpt3sas_scsih.o      \
+		mpt3sas_transport.o     \
+		mpt3sas_ctl.o	\
+		mpt3sas_trigger_diag.o
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
new file mode 100644
index 0000000..03317ff
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -0,0 +1,1164 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2.h
+ *         Title:  MPI Message independent structures and definitions
+ *                 including System Interface Register Set and
+ *                 scatter/gather formats.
+ * Creation Date:  June 21, 2006
+ *
+ * mpi2.h Version:  02.00.26
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Moved ReplyPostHostIndex register to offset 0x6C of the
+ *                     MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ *                     MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ *                     Added union of request descriptors.
+ *                     Added union of reply descriptors.
+ * 10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added define for MPI2_VERSION_02_00.
+ *                     Fixed the size of the FunctionDependent5 field in the
+ *                     MPI2_DEFAULT_REPLY structure.
+ * 12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Removed the MPI-defined Fault Codes and extended the
+ *                     product specific codes up to 0xEFFF.
+ *                     Added a sixth key value for the WriteSequence register
+ *                     and changed the flush value to 0x0.
+ *                     Added message function codes for Diagnostic Buffer Post
+ *                     and Diagnsotic Release.
+ *                     New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ *                     Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ * 02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added #defines for marking a reply descriptor as unused.
+ * 06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Moved LUN field defines from mpi2_init.h.
+ * 01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     In all request and reply descriptors, replaced VF_ID
+ *                     field with MSIxIndex field.
+ *                     Removed DevHandle field from
+ *                     MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ *                     bytes reserved.
+ *                     Added RAID Accelerator functionality.
+ * 07-30-09  02.00.13  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09  02.00.14  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MSI-x index mask and shift for Reply Post Host
+ *                     Index register.
+ *                     Added function code for Host Based Discovery Action.
+ * 02-10-10  02.00.15  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
+ *                     Added defines for product-specific range of message
+ *                     function codes, 0xF0 to 0xFF.
+ * 05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added alternative defines for the SGE Direction bit.
+ * 08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-11  02.00.21  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-24-11  02.00.22  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-11  02.00.23  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.24  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-29-12  02.00.25  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added Hard Reset delay timings.
+ * 07-10-12  02.00.26  Bumped MPI2_HEADER_VERSION_UNIT.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_H
+#define MPI2_H
+
+/*****************************************************************************
+*
+*       MPI Version Definitions
+*
+*****************************************************************************/
+
+#define MPI2_VERSION_MAJOR_MASK             (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT            (8)
+#define MPI2_VERSION_MINOR_MASK             (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT            (0)
+
+/*major version for all MPI v2.x */
+#define MPI2_VERSION_MAJOR                  (0x02)
+
+/*minor version for MPI v2.0 compatible products */
+#define MPI2_VERSION_MINOR                  (0x00)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+					MPI2_VERSION_MINOR)
+#define MPI2_VERSION_02_00                  (0x0200)
+
+/*minor version for MPI v2.5 compatible products */
+#define MPI25_VERSION_MINOR                 (0x05)
+#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+					MPI25_VERSION_MINOR)
+#define MPI2_VERSION_02_05                  (0x0205)
+
+/*Unit and Dev versioning for this MPI header set */
+#define MPI2_HEADER_VERSION_UNIT            (0x1A)
+#define MPI2_HEADER_VERSION_DEV             (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
+#define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
+					MPI2_HEADER_VERSION_DEV)
+
+/*****************************************************************************
+*
+*       IOC State Definitions
+*
+*****************************************************************************/
+
+#define MPI2_IOC_STATE_RESET               (0x00000000)
+#define MPI2_IOC_STATE_READY               (0x10000000)
+#define MPI2_IOC_STATE_OPERATIONAL         (0x20000000)
+#define MPI2_IOC_STATE_FAULT               (0x40000000)
+
+#define MPI2_IOC_STATE_MASK                (0xF0000000)
+#define MPI2_IOC_STATE_SHIFT               (28)
+
+/*Fault state range for prodcut specific codes */
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN                 (0x0000)
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX                 (0xEFFF)
+
+/*****************************************************************************
+*
+*       System Interface Register Definitions
+*
+*****************************************************************************/
+
+typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
+	U32 Doorbell;		/*0x00 */
+	U32 WriteSequence;	/*0x04 */
+	U32 HostDiagnostic;	/*0x08 */
+	U32 Reserved1;		/*0x0C */
+	U32 DiagRWData;		/*0x10 */
+	U32 DiagRWAddressLow;	/*0x14 */
+	U32 DiagRWAddressHigh;	/*0x18 */
+	U32 Reserved2[5];	/*0x1C */
+	U32 HostInterruptStatus;	/*0x30 */
+	U32 HostInterruptMask;	/*0x34 */
+	U32 DCRData;		/*0x38 */
+	U32 DCRAddress;		/*0x3C */
+	U32 Reserved3[2];	/*0x40 */
+	U32 ReplyFreeHostIndex;	/*0x48 */
+	U32 Reserved4[8];	/*0x4C */
+	U32 ReplyPostHostIndex;	/*0x6C */
+	U32 Reserved5;		/*0x70 */
+	U32 HCBSize;		/*0x74 */
+	U32 HCBAddressLow;	/*0x78 */
+	U32 HCBAddressHigh;	/*0x7C */
+	U32 Reserved6[16];	/*0x80 */
+	U32 RequestDescriptorPostLow;	/*0xC0 */
+	U32 RequestDescriptorPostHigh;	/*0xC4 */
+	U32 Reserved7[14];	/*0xC8 */
+} MPI2_SYSTEM_INTERFACE_REGS,
+	*PTR_MPI2_SYSTEM_INTERFACE_REGS,
+	Mpi2SystemInterfaceRegs_t,
+	*pMpi2SystemInterfaceRegs_t;
+
+/*
+ *Defines for working with the Doorbell register.
+ */
+#define MPI2_DOORBELL_OFFSET                    (0x00000000)
+
+/*IOC --> System values */
+#define MPI2_DOORBELL_USED                      (0x08000000)
+#define MPI2_DOORBELL_WHO_INIT_MASK             (0x07000000)
+#define MPI2_DOORBELL_WHO_INIT_SHIFT            (24)
+#define MPI2_DOORBELL_FAULT_CODE_MASK           (0x0000FFFF)
+#define MPI2_DOORBELL_DATA_MASK                 (0x0000FFFF)
+
+/*System --> IOC values */
+#define MPI2_DOORBELL_FUNCTION_MASK             (0xFF000000)
+#define MPI2_DOORBELL_FUNCTION_SHIFT            (24)
+#define MPI2_DOORBELL_ADD_DWORDS_MASK           (0x00FF0000)
+#define MPI2_DOORBELL_ADD_DWORDS_SHIFT          (16)
+
+/*
+ *Defines for the WriteSequence register
+ */
+#define MPI2_WRITE_SEQUENCE_OFFSET              (0x00000004)
+#define MPI2_WRSEQ_KEY_VALUE_MASK               (0x0000000F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE              (0x0)
+#define MPI2_WRSEQ_1ST_KEY_VALUE                (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE                (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE                (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE                (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE                (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE                (0xD)
+
+/*
+ *Defines for the HostDiagnostic register
+ */
+#define MPI2_HOST_DIAGNOSTIC_OFFSET             (0x00000008)
+
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK       (0x00001800)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT    (0x00000000)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW       (0x00000800)
+
+#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG           (0x00000400)
+#define MPI2_DIAG_FORCE_HCB_ON_RESET            (0x00000200)
+#define MPI2_DIAG_HCB_MODE                      (0x00000100)
+#define MPI2_DIAG_DIAG_WRITE_ENABLE             (0x00000080)
+#define MPI2_DIAG_FLASH_BAD_SIG                 (0x00000040)
+#define MPI2_DIAG_RESET_HISTORY                 (0x00000020)
+#define MPI2_DIAG_DIAG_RW_ENABLE                (0x00000010)
+#define MPI2_DIAG_RESET_ADAPTER                 (0x00000004)
+#define MPI2_DIAG_HOLD_IOC_RESET                (0x00000002)
+
+/*
+ *Offsets for DiagRWData and address
+ */
+#define MPI2_DIAG_RW_DATA_OFFSET                (0x00000010)
+#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET         (0x00000014)
+#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET        (0x00000018)
+
+/*
+ *Defines for the HostInterruptStatus register
+ */
+#define MPI2_HOST_INTERRUPT_STATUS_OFFSET       (0x00000030)
+#define MPI2_HIS_SYS2IOC_DB_STATUS              (0x80000000)
+#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
+#define MPI2_HIS_RESET_IRQ_STATUS               (0x40000000)
+#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT     (0x00000008)
+#define MPI2_HIS_IOC2SYS_DB_STATUS              (0x00000001)
+#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
+
+/*
+ *Defines for the HostInterruptMask register
+ */
+#define MPI2_HOST_INTERRUPT_MASK_OFFSET         (0x00000034)
+#define MPI2_HIM_RESET_IRQ_MASK                 (0x40000000)
+#define MPI2_HIM_REPLY_INT_MASK                 (0x00000008)
+#define MPI2_HIM_RIM                            MPI2_HIM_REPLY_INT_MASK
+#define MPI2_HIM_IOC2SYS_DB_MASK                (0x00000001)
+#define MPI2_HIM_DIM                            MPI2_HIM_IOC2SYS_DB_MASK
+
+/*
+ *Offsets for DCRData and address
+ */
+#define MPI2_DCR_DATA_OFFSET                    (0x00000038)
+#define MPI2_DCR_ADDRESS_OFFSET                 (0x0000003C)
+
+/*
+ *Offset for the Reply Free Queue
+ */
+#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET       (0x00000048)
+
+/*
+ *Defines for the Reply Descriptor Post Queue
+ */
+#define MPI2_REPLY_POST_HOST_INDEX_OFFSET       (0x0000006C)
+#define MPI2_REPLY_POST_HOST_INDEX_MASK         (0x00FFFFFF)
+#define MPI2_RPHI_MSIX_INDEX_MASK               (0xFF000000)
+#define MPI2_RPHI_MSIX_INDEX_SHIFT              (24)
+
+/*
+ *Defines for the HCBSize and address
+ */
+#define MPI2_HCB_SIZE_OFFSET                    (0x00000074)
+#define MPI2_HCB_SIZE_SIZE_MASK                 (0xFFFFF000)
+#define MPI2_HCB_SIZE_HCB_ENABLE                (0x00000001)
+
+#define MPI2_HCB_ADDRESS_LOW_OFFSET             (0x00000078)
+#define MPI2_HCB_ADDRESS_HIGH_OFFSET            (0x0000007C)
+
+/*
+ *Offsets for the Request Queue
+ */
+#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET     (0x000000C0)
+#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET    (0x000000C4)
+
+/*Hard Reset delay timings */
+#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC     (50000)
+#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC    (255000)
+#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC    (256000)
+
+/*****************************************************************************
+*
+*       Message Descriptors
+*
+*****************************************************************************/
+
+/*Request Descriptors */
+
+/*Default Request Descriptor */
+typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 DescriptorTypeDependent;	/*0x06 */
+} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+	Mpi2DefaultRequestDescriptor_t,
+	*pMpi2DefaultRequestDescriptor_t;
+
+/*defines for the RequestFlags field */
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK               (0x0E)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
+#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO      (0x0C)
+
+#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
+
+/*High Priority Request Descriptor */
+typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+	Mpi2HighPriorityRequestDescriptor_t,
+	*pMpi2HighPriorityRequestDescriptor_t;
+
+/*SCSI IO Request Descriptor */
+typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 DevHandle;		/*0x06 */
+} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+	Mpi2SCSIIORequestDescriptor_t,
+	*pMpi2SCSIIORequestDescriptor_t;
+
+/*SCSI Target Request Descriptor */
+typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+	Mpi2SCSITargetRequestDescriptor_t,
+	*pMpi2SCSITargetRequestDescriptor_t;
+
+/*RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 Reserved;		/*0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+	Mpi2RAIDAcceleratorRequestDescriptor_t,
+	*pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+/*Fast Path SCSI IO Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+	MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+	*PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+	Mpi25FastPathSCSIIORequestDescriptor_t,
+	*pMpi25FastPathSCSIIORequestDescriptor_t;
+
+/*union of Request Descriptors */
+typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
+	MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+	MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+	MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+	MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+	MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+	MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+	U64 Words;
+} MPI2_REQUEST_DESCRIPTOR_UNION,
+	*PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
+	Mpi2RequestDescriptorUnion_t,
+	*pMpi2RequestDescriptorUnion_t;
+
+/*Reply Descriptors */
+
+/*Default Reply Descriptor */
+typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 DescriptorTypeDependent1;	/*0x02 */
+	U32 DescriptorTypeDependent2;	/*0x04 */
+} MPI2_DEFAULT_REPLY_DESCRIPTOR,
+	*PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
+	Mpi2DefaultReplyDescriptor_t,
+	*pMpi2DefaultReplyDescriptor_t;
+
+/*defines for the ReplyFlags field */
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
+#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS  (0x06)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
+
+/*values for marking a reply descriptor as unused */
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK             (0xFFFFFFFF)
+
+/*Address Reply Descriptor */
+typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U32 ReplyFrameAddress;	/*0x04 */
+} MPI2_ADDRESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
+	Mpi2AddressReplyDescriptor_t,
+	*pMpi2AddressReplyDescriptor_t;
+
+#define MPI2_ADDRESS_REPLY_SMID_INVALID                 (0x00)
+
+/*SCSI IO Success Reply Descriptor */
+typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 TaskTag;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2SCSIIOSuccessReplyDescriptor_t,
+	*pMpi2SCSIIOSuccessReplyDescriptor_t;
+
+/*TargetAssist Success Reply Descriptor */
+typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U8 SequenceNumber;	/*0x04 */
+	U8 Reserved1;		/*0x05 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2TargetAssistSuccessReplyDescriptor_t,
+	*pMpi2TargetAssistSuccessReplyDescriptor_t;
+
+/*Target Command Buffer Reply Descriptor */
+typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U8 VP_ID;		/*0x02 */
+	U8 Flags;		/*0x03 */
+	U16 InitiatorDevHandle;	/*0x04 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+	*PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+	Mpi2TargetCommandBufferReplyDescriptor_t,
+	*pMpi2TargetCommandBufferReplyDescriptor_t;
+
+/*defines for Flags field */
+#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK     (0x3F)
+
+/*RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U32 Reserved;		/*0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+	*pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+/*Fast Path SCSI IO Success Reply Descriptor */
+typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
+	MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
+	*pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+
+/*union of Reply Descriptors */
+typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
+	MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+	MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+	MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+	MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+	MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+	MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
+	MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+	U64 Words;
+} MPI2_REPLY_DESCRIPTORS_UNION,
+	*PTR_MPI2_REPLY_DESCRIPTORS_UNION,
+	Mpi2ReplyDescriptorsUnion_t,
+	*pMpi2ReplyDescriptorsUnion_t;
+
+/*****************************************************************************
+*
+*       Message Functions
+*
+*****************************************************************************/
+
+#define MPI2_FUNCTION_SCSI_IO_REQUEST		    (0x00)
+#define MPI2_FUNCTION_SCSI_TASK_MGMT		    (0x01)
+#define MPI2_FUNCTION_IOC_INIT                      (0x02)
+#define MPI2_FUNCTION_IOC_FACTS                     (0x03)
+#define MPI2_FUNCTION_CONFIG                        (0x04)
+#define MPI2_FUNCTION_PORT_FACTS                    (0x05)
+#define MPI2_FUNCTION_PORT_ENABLE                   (0x06)
+#define MPI2_FUNCTION_EVENT_NOTIFICATION            (0x07)
+#define MPI2_FUNCTION_EVENT_ACK                     (0x08)
+#define MPI2_FUNCTION_FW_DOWNLOAD                   (0x09)
+#define MPI2_FUNCTION_TARGET_ASSIST                 (0x0B)
+#define MPI2_FUNCTION_TARGET_STATUS_SEND            (0x0C)
+#define MPI2_FUNCTION_TARGET_MODE_ABORT             (0x0D)
+#define MPI2_FUNCTION_FW_UPLOAD                     (0x12)
+#define MPI2_FUNCTION_RAID_ACTION                   (0x15)
+#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH      (0x16)
+#define MPI2_FUNCTION_TOOLBOX                       (0x17)
+#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR      (0x18)
+#define MPI2_FUNCTION_SMP_PASSTHROUGH               (0x1A)
+#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL           (0x1B)
+#define MPI2_FUNCTION_SATA_PASSTHROUGH              (0x1C)
+#define MPI2_FUNCTION_DIAG_BUFFER_POST              (0x1D)
+#define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25)
+#define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C)
+#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
+#define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
+#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
+#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF)
+
+/*Doorbell functions */
+#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET        (0x40)
+#define MPI2_FUNCTION_HANDSHAKE                     (0x42)
+
+/*****************************************************************************
+*
+*       IOC Status Values
+*
+*****************************************************************************/
+
+/*mask for IOCStatus status value */
+#define MPI2_IOCSTATUS_MASK                     (0x7FFF)
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SUCCESS                      (0x0000)
+#define MPI2_IOCSTATUS_INVALID_FUNCTION             (0x0001)
+#define MPI2_IOCSTATUS_BUSY                         (0x0002)
+#define MPI2_IOCSTATUS_INVALID_SGL                  (0x0003)
+#define MPI2_IOCSTATUS_INTERNAL_ERROR               (0x0004)
+#define MPI2_IOCSTATUS_INVALID_VPID                 (0x0005)
+#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES       (0x0006)
+#define MPI2_IOCSTATUS_INVALID_FIELD                (0x0007)
+#define MPI2_IOCSTATUS_INVALID_STATE                (0x0008)
+#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED       (0x0009)
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION        (0x0020)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE          (0x0021)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE          (0x0022)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA          (0x0023)
+#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS           (0x0024)
+#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT           (0x0025)
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR         (0x0040)
+#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE       (0x0042)
+#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE        (0x0043)
+#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN            (0x0044)
+#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN           (0x0045)
+#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR           (0x0046)
+#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR          (0x0047)
+#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED         (0x0048)
+#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH       (0x0049)
+#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED        (0x004A)
+#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED          (0x004B)
+#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED          (0x004C)
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR             (0x004D)
+#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR           (0x004E)
+#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR           (0x004F)
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX      (0x0062)
+#define MPI2_IOCSTATUS_TARGET_ABORTED               (0x0063)
+#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE     (0x0064)
+#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION         (0x0065)
+#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH   (0x006A)
+#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR     (0x006D)
+#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA   (0x006E)
+#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT          (0x006F)
+#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT       (0x0070)
+#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED          (0x0071)
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED       (0x0090)
+#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN         (0x0091)
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED          (0x00A0)
+
+/****************************************************************************
+* RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR             (0x00B0)
+
+/****************************************************************************
+* IOCStatus flag to indicate that log info is available
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE      (0x8000)
+
+/****************************************************************************
+* IOCLogInfo Types
+****************************************************************************/
+
+#define MPI2_IOCLOGINFO_TYPE_MASK               (0xF0000000)
+#define MPI2_IOCLOGINFO_TYPE_SHIFT              (28)
+#define MPI2_IOCLOGINFO_TYPE_NONE               (0x0)
+#define MPI2_IOCLOGINFO_TYPE_SCSI               (0x1)
+#define MPI2_IOCLOGINFO_TYPE_FC                 (0x2)
+#define MPI2_IOCLOGINFO_TYPE_SAS                (0x3)
+#define MPI2_IOCLOGINFO_TYPE_ISCSI              (0x4)
+#define MPI2_IOCLOGINFO_LOG_DATA_MASK           (0x0FFFFFFF)
+
+/*****************************************************************************
+*
+*       Standard Message Structures
+*
+*****************************************************************************/
+
+/****************************************************************************
+*Request Message Header for all request messages
+****************************************************************************/
+
+typedef struct _MPI2_REQUEST_HEADER {
+	U16 FunctionDependent1;	/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 FunctionDependent2;	/*0x04 */
+	U8 FunctionDependent3;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER,
+	MPI2RequestHeader_t, *pMPI2RequestHeader_t;
+
+/****************************************************************************
+* Default Reply
+****************************************************************************/
+
+typedef struct _MPI2_DEFAULT_REPLY {
+	U16 FunctionDependent1;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 FunctionDependent2;	/*0x04 */
+	U8 FunctionDependent3;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U16 FunctionDependent5;	/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY,
+	MPI2DefaultReply_t, *pMPI2DefaultReply_t;
+
+/*common version structure/union used in messages and configuration pages */
+
+typedef struct _MPI2_VERSION_STRUCT {
+	U8 Dev;			/*0x00 */
+	U8 Unit;		/*0x01 */
+	U8 Minor;		/*0x02 */
+	U8 Major;		/*0x03 */
+} MPI2_VERSION_STRUCT;
+
+typedef union _MPI2_VERSION_UNION {
+	MPI2_VERSION_STRUCT Struct;
+	U32 Word;
+} MPI2_VERSION_UNION;
+
+/*LUN field defines, common to many structures */
+#define MPI2_LUN_FIRST_LEVEL_ADDRESSING             (0x0000FFFF)
+#define MPI2_LUN_SECOND_LEVEL_ADDRESSING            (0xFFFF0000)
+#define MPI2_LUN_THIRD_LEVEL_ADDRESSING             (0x0000FFFF)
+#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING            (0xFFFF0000)
+#define MPI2_LUN_LEVEL_1_WORD                       (0xFF00)
+#define MPI2_LUN_LEVEL_1_DWORD                      (0x0000FF00)
+
+/*****************************************************************************
+*
+*       Fusion-MPT MPI Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* MPI Simple Element structures
+****************************************************************************/
+
+typedef struct _MPI2_SGE_SIMPLE32 {
+	U32 FlagsLength;
+	U32 Address;
+} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32,
+	Mpi2SGESimple32_t, *pMpi2SGESimple32_t;
+
+typedef struct _MPI2_SGE_SIMPLE64 {
+	U32 FlagsLength;
+	U64 Address;
+} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64,
+	Mpi2SGESimple64_t, *pMpi2SGESimple64_t;
+
+typedef struct _MPI2_SGE_SIMPLE_UNION {
+	U32 FlagsLength;
+	union {
+		U32 Address32;
+		U64 Address64;
+	} u;
+} MPI2_SGE_SIMPLE_UNION,
+	*PTR_MPI2_SGE_SIMPLE_UNION,
+	Mpi2SGESimpleUnion_t,
+	*pMpi2SGESimpleUnion_t;
+
+/****************************************************************************
+* MPI Chain Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_CHAIN32 {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	U32 Address;
+} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32,
+	Mpi2SGEChain32_t, *pMpi2SGEChain32_t;
+
+typedef struct _MPI2_SGE_CHAIN64 {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	U64 Address;
+} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64,
+	Mpi2SGEChain64_t, *pMpi2SGEChain64_t;
+
+typedef struct _MPI2_SGE_CHAIN_UNION {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	union {
+		U32 Address32;
+		U64 Address64;
+	} u;
+} MPI2_SGE_CHAIN_UNION,
+	*PTR_MPI2_SGE_CHAIN_UNION,
+	Mpi2SGEChainUnion_t,
+	*pMpi2SGEChainUnion_t;
+
+/****************************************************************************
+* MPI Transaction Context Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANSACTION32 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[1];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION32,
+	*PTR_MPI2_SGE_TRANSACTION32,
+	Mpi2SGETransaction32_t,
+	*pMpi2SGETransaction32_t;
+
+typedef struct _MPI2_SGE_TRANSACTION64 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[2];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION64,
+	*PTR_MPI2_SGE_TRANSACTION64,
+	Mpi2SGETransaction64_t,
+	*pMpi2SGETransaction64_t;
+
+typedef struct _MPI2_SGE_TRANSACTION96 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[3];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96,
+	Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t;
+
+typedef struct _MPI2_SGE_TRANSACTION128 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[4];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128,
+	Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128;
+
+typedef struct _MPI2_SGE_TRANSACTION_UNION {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	union {
+		U32 TransactionContext32[1];
+		U32 TransactionContext64[2];
+		U32 TransactionContext96[3];
+		U32 TransactionContext128[4];
+	} u;
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION_UNION,
+	*PTR_MPI2_SGE_TRANSACTION_UNION,
+	Mpi2SGETransactionUnion_t,
+	*pMpi2SGETransactionUnion_t;
+
+/****************************************************************************
+* MPI SGE union for IO SGL's - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_IO_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_CHAIN_UNION Chain;
+	} u;
+} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION,
+	Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t;
+
+/****************************************************************************
+* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_TRANSACTION_UNION Transaction;
+	} u;
+} MPI2_SGE_TRANS_SIMPLE_UNION,
+	*PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
+	Mpi2SGETransSimpleUnion_t,
+	*pMpi2SGETransSimpleUnion_t;
+
+/****************************************************************************
+* All MPI SGE types union
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_CHAIN_UNION Chain;
+		MPI2_SGE_TRANSACTION_UNION Transaction;
+	} u;
+} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION,
+	Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t;
+
+/****************************************************************************
+* MPI SGE field definition and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_SGE_FLAGS_LAST_ELEMENT             (0x80)
+#define MPI2_SGE_FLAGS_END_OF_BUFFER            (0x40)
+#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK        (0x30)
+#define MPI2_SGE_FLAGS_LOCAL_ADDRESS            (0x08)
+#define MPI2_SGE_FLAGS_DIRECTION                (0x04)
+#define MPI2_SGE_FLAGS_ADDRESS_SIZE             (0x02)
+#define MPI2_SGE_FLAGS_END_OF_LIST              (0x01)
+
+#define MPI2_SGE_FLAGS_SHIFT                    (24)
+
+#define MPI2_SGE_LENGTH_MASK                    (0x00FFFFFF)
+#define MPI2_SGE_CHAIN_LENGTH_MASK              (0x0000FFFF)
+
+/*Element Type */
+
+#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT      (0x00)
+#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT           (0x10)
+#define MPI2_SGE_FLAGS_CHAIN_ELEMENT            (0x30)
+#define MPI2_SGE_FLAGS_ELEMENT_MASK             (0x30)
+
+/*Address location */
+
+#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS           (0x00)
+
+/*Direction */
+
+#define MPI2_SGE_FLAGS_IOC_TO_HOST              (0x00)
+#define MPI2_SGE_FLAGS_HOST_TO_IOC              (0x04)
+
+#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
+#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
+
+/*Address Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)
+
+/*Context Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_CONTEXT           (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_CONTEXT           (0x02)
+#define MPI2_SGE_FLAGS_96_BIT_CONTEXT           (0x04)
+#define MPI2_SGE_FLAGS_128_BIT_CONTEXT          (0x06)
+
+#define MPI2_SGE_CHAIN_OFFSET_MASK              (0x00FF0000)
+#define MPI2_SGE_CHAIN_OFFSET_SHIFT             (16)
+
+/****************************************************************************
+* MPI SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \
+					MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
+#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
+
+#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \
+					MPI2_SGE_LENGTH(l))
+
+#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+					MPI2_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+					MPI2_SGE_SET_FLAGS(f))
+#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+					MPI2_SGE_LENGTH(l))
+
+#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \
+					MPI2_SGE_CHAIN_OFFSET_SHIFT)
+
+/*****************************************************************************
+*
+*       Fusion-MPT IEEE Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IEEE Simple Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_SIMPLE32 {
+	U32 Address;
+	U32 FlagsLength;
+} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32,
+	Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t;
+
+typedef struct _MPI2_IEEE_SGE_SIMPLE64 {
+	U64 Address;
+	U32 Length;
+	U16 Reserved1;
+	U8 Reserved2;
+	U8 Flags;
+} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64,
+	Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t;
+
+typedef union _MPI2_IEEE_SGE_SIMPLE_UNION {
+	MPI2_IEEE_SGE_SIMPLE32 Simple32;
+	MPI2_IEEE_SGE_SIMPLE64 Simple64;
+} MPI2_IEEE_SGE_SIMPLE_UNION,
+	*PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
+	Mpi2IeeeSgeSimpleUnion_t,
+	*pMpi2IeeeSgeSimpleUnion_t;
+
+/****************************************************************************
+* IEEE Chain Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
+
+/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
+
+typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
+	MPI2_IEEE_SGE_CHAIN32 Chain32;
+	MPI2_IEEE_SGE_CHAIN64 Chain64;
+} MPI2_IEEE_SGE_CHAIN_UNION,
+	*PTR_MPI2_IEEE_SGE_CHAIN_UNION,
+	Mpi2IeeeSgeChainUnion_t,
+	*pMpi2IeeeSgeChainUnion_t;
+
+/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 products only */
+typedef struct _MPI25_IEEE_SGE_CHAIN64 {
+	U64 Address;
+	U32 Length;
+	U16 Reserved1;
+	U8 NextChainOffset;
+	U8 Flags;
+} MPI25_IEEE_SGE_CHAIN64,
+	*PTR_MPI25_IEEE_SGE_CHAIN64,
+	Mpi25IeeeSgeChain64_t,
+	*pMpi25IeeeSgeChain64_t;
+
+/****************************************************************************
+* All IEEE SGE types union
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_UNION {
+	union {
+		MPI2_IEEE_SGE_SIMPLE_UNION Simple;
+		MPI2_IEEE_SGE_CHAIN_UNION Chain;
+	} u;
+} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION,
+	Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t;
+
+/****************************************************************************
+* IEEE SGE union for IO SGL's
+****************************************************************************/
+
+typedef union _MPI25_SGE_IO_UNION {
+	MPI2_IEEE_SGE_SIMPLE64 IeeeSimple;
+	MPI25_IEEE_SGE_CHAIN64 IeeeChain;
+} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION,
+	Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t;
+
+/****************************************************************************
+* IEEE SGE field definitions and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK   (0x80)
+#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST        (0x40)
+
+#define MPI2_IEEE32_SGE_FLAGS_SHIFT             (24)
+
+#define MPI2_IEEE32_SGE_LENGTH_MASK             (0x00FFFFFF)
+
+/*Element Type */
+
+#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT      (0x00)
+#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT       (0x80)
+
+/*Data Location Address Space */
+
+#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK           (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR         (0x00)
+#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR         (0x01)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR         (0x02)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR   (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
+	 (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR)
+
+/****************************************************************************
+* IEEE SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \
+				 >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_LENGTH(f)    ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
+
+#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\
+						 MPI2_IEEE32_SGE_LENGTH(l))
+
+#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \
+			MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \
+			MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+					MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+					MPI2_IEEE32_SGE_SET_FLAGS(f))
+#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+					MPI2_IEEE32_SGE_LENGTH(l))
+
+/*****************************************************************************
+*
+*       Fusion-MPT MPI/IEEE Scatter Gather Unions
+*
+*****************************************************************************/
+
+typedef union _MPI2_SIMPLE_SGE_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION,
+	Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t;
+
+typedef union _MPI2_SGE_IO_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;
+	MPI2_SGE_CHAIN_UNION MpiChain;
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+	MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
+} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION,
+	Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t;
+
+/****************************************************************************
+*
+* Values for SGLFlags field, used in many request messages with an SGL
+*
+****************************************************************************/
+
+/*values for MPI SGL Data Location Address Space subfield */
+#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK            (0x0C)
+#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE          (0x00)
+#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE          (0x04)
+#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE          (0x08)
+#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE       (0x0C)
+/*values for SGL Type subfield */
+#define MPI2_SGLFLAGS_SGL_TYPE_MASK                 (0x03)
+#define MPI2_SGLFLAGS_SGL_TYPE_MPI                  (0x00)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32               (0x01)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64               (0x02)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
new file mode 100644
index 0000000..d8b2c3e
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -0,0 +1,3323 @@
+/*
+ * Copyright (c) 2000-2011 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_cnfg.h
+ *         Title:  MPI Configuration messages and pages
+ * Creation Date:  November 10, 2006
+ *
+ *   mpi2_cnfg.h Version:  02.00.22
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
+ *                     Added Manufacturing Page 11.
+ *                     Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ *                     define.
+ * 06-26-07  02.00.02  Adding generic structure for product-specific
+ *                     Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ *                     Rework of BIOS Page 2 configuration page.
+ *                     Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ *                     forms.
+ *                     Added configuration pages IOC Page 8 and Driver
+ *                     Persistent Mapping Page 0.
+ * 08-31-07  02.00.03  Modified configuration pages dealing with Integrated
+ *                     RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ *                     RAID Physical Disk Pages 0 and 1, RAID Configuration
+ *                     Page 0).
+ *                     Added new value for AccessStatus field of SAS Device
+ *                     Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 10-31-07  02.00.04  Added missing SEPDevHandle field to
+ *                     MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
+ *                     NVDATA.
+ *                     Modified IOC Page 7 to use masks and added field for
+ *                     SASBroadcastPrimitiveMasks.
+ *                     Added MPI2_CONFIG_PAGE_BIOS_4.
+ *                     Added MPI2_CONFIG_PAGE_LOG_0.
+ * 02-29-08  02.00.06  Modified various names to make them 32-character unique.
+ *                     Added SAS Device IDs.
+ *                     Updated Integrated RAID configuration pages including
+ *                     Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ *                     Page 0.
+ * 05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ *                     Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ *                     Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ *                     Added missing MaxNumRoutedSasAddresses field to
+ *                     MPI2_CONFIG_PAGE_EXPANDER_0.
+ *                     Added SAS Port Page 0.
+ *                     Modified structure layout for
+ *                     MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ * 06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ *                     MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ * 10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ *                     to 0x000000FF.
+ *                     Added two new values for the Physical Disk Coercion Size
+ *                     bits in the Flags field of Manufacturing Page 4.
+ *                     Added product-specific Manufacturing pages 16 to 31.
+ *                     Modified Flags bits for controlling write cache on SATA
+ *                     drives in IO Unit Page 1.
+ *                     Added new bit to AdditionalControlFlags of SAS IO Unit
+ *                     Page 1 to control Invalid Topology Correction.
+ *                     Added additional defines for RAID Volume Page 0
+ *                     VolumeStatusFlags field.
+ *                     Modified meaning of RAID Volume Page 0 VolumeSettings
+ *                     define for auto-configure of hot-swap drives.
+ *                     Added SupportedPhysDisks field to RAID Volume Page 1 and
+ *                     added related defines.
+ *                     Added PhysDiskAttributes field (and related defines) to
+ *                     RAID Physical Disk Page 0.
+ *                     Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ *                     Added three new DiscoveryStatus bits for SAS IO Unit
+ *                     Page 0 and SAS Expander Page 0.
+ *                     Removed multiplexing information from SAS IO Unit pages.
+ *                     Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ *                     Removed Zone Address Resolved bit from PhyInfo and from
+ *                     Expander Page 0 Flags field.
+ *                     Added two new AccessStatus values to SAS Device Page 0
+ *                     for indicating routing problems. Added 3 reserved words
+ *                     to this page.
+ * 01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
+ *                     Inserted missing reserved field into structure for IOC
+ *                     Page 6.
+ *                     Added more pending task bits to RAID Volume Page 0
+ *                     VolumeStatusFlags defines.
+ *                     Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ *                     Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ *                     and SAS Expander Page 0 to flag a downstream initiator
+ *                     when in simplified routing mode.
+ *                     Removed SATA Init Failure defines for DiscoveryStatus
+ *                     fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ *                     Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ *                     Added PortGroups, DmaGroup, and ControlGroup fields to
+ *                     SAS Device Page 0.
+ * 05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
+ *                     Unit Page 6.
+ *                     Added expander reduced functionality data to SAS
+ *                     Expander Page 0.
+ *                     Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09  02.00.12  Added IO Unit Page 7.
+ *                     Added new device ids.
+ *                     Added SAS IO Unit Page 5.
+ *                     Added partial and slumber power management capable flags
+ *                     to SAS Device Page 0 Flags field.
+ *                     Added PhyInfo defines for power condition.
+ *                     Added Ethernet configuration pages.
+ * 10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ *                     Added SAS PHY Page 4 structure and defines.
+ * 02-10-10  02.00.14  Modified the comments for the configuration page
+ *                     structures that contain an array of data. The host
+ *                     should use the "count" field in the page data (e.g. the
+ *                     NumPhys field) to determine the number of valid elements
+ *                     in the array.
+ *                     Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ *                     Added PowerManagementCapabilities to IO Unit Page 7.
+ *                     Added PortWidthModGroup field to
+ *                     MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
+ * 05-12-10  02.00.15  Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
+ *                     define.
+ *                     Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
+ *                     Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
+ * 08-11-10  02.00.16  Removed IO Unit Page 1 device path (multi-pathing)
+ *                     defines.
+ * 11-10-10  02.00.17  Added ReceptacleID field (replacing Reserved1) to
+ *                     MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
+ *                     the Pinout field.
+ *                     Added BoardTemperature and BoardTemperatureUnits fields
+ *                     to MPI2_CONFIG_PAGE_IO_UNIT_7.
+ *                     Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
+ *                     and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ *                     Added IO Unit Page 8, IO Unit Page 9,
+ *                     and IO Unit Page 10.
+ *                     Added SASNotifyPrimitiveMasks field to
+ *                     MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
+ * 05-25-11  02.00.20  Cleaned up a few comments.
+ * 08-24-11  02.00.21  Marked the IO Unit Page 7 PowerManagementCapabilities
+ *                     for PCIe link as obsolete.
+ *                     Added SpinupFlags field containing a Disable Spin-up bit
+ *                     to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
+ *                     Unit Page 4.
+ * 11-18-11  02.00.22  Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
+ *                     Added UEFIVersion field to BIOS Page 1 and defined new
+ *                     BiosOptions bits.
+ *                     Incorporating additions for MPI v2.5.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_CNFG_H
+#define MPI2_CNFG_H
+
+/*****************************************************************************
+*  Configuration Page Header and defines
+*****************************************************************************/
+
+/*Config Page Header */
+typedef struct _MPI2_CONFIG_PAGE_HEADER {
+	U8                 PageVersion;                /*0x00 */
+	U8                 PageLength;                 /*0x01 */
+	U8                 PageNumber;                 /*0x02 */
+	U8                 PageType;                   /*0x03 */
+} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
+	Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
+
+typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
+	MPI2_CONFIG_PAGE_HEADER  Struct;
+	U8                       Bytes[4];
+	U16                      Word16[2];
+	U32                      Word32;
+} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
+	Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
+
+/*Extended Config Page Header */
+typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
+	U8                  PageVersion;                /*0x00 */
+	U8                  Reserved1;                  /*0x01 */
+	U8                  PageNumber;                 /*0x02 */
+	U8                  PageType;                   /*0x03 */
+	U16                 ExtPageLength;              /*0x04 */
+	U8                  ExtPageType;                /*0x06 */
+	U8                  Reserved2;                  /*0x07 */
+} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+	*PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+	Mpi2ConfigExtendedPageHeader_t,
+	*pMpi2ConfigExtendedPageHeader_t;
+
+typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
+	MPI2_CONFIG_PAGE_HEADER          Struct;
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
+	U8                               Bytes[8];
+	U16                              Word16[4];
+	U32                              Word32[2];
+} MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+	*PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+	Mpi2ConfigPageExtendedHeaderUnion,
+	*pMpi2ConfigPageExtendedHeaderUnion;
+
+
+/*PageType field values */
+#define MPI2_CONFIG_PAGEATTR_READ_ONLY              (0x00)
+#define MPI2_CONFIG_PAGEATTR_CHANGEABLE             (0x10)
+#define MPI2_CONFIG_PAGEATTR_PERSISTENT             (0x20)
+#define MPI2_CONFIG_PAGEATTR_MASK                   (0xF0)
+
+#define MPI2_CONFIG_PAGETYPE_IO_UNIT                (0x00)
+#define MPI2_CONFIG_PAGETYPE_IOC                    (0x01)
+#define MPI2_CONFIG_PAGETYPE_BIOS                   (0x02)
+#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME            (0x08)
+#define MPI2_CONFIG_PAGETYPE_MANUFACTURING          (0x09)
+#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK          (0x0A)
+#define MPI2_CONFIG_PAGETYPE_EXTENDED               (0x0F)
+#define MPI2_CONFIG_PAGETYPE_MASK                   (0x0F)
+
+#define MPI2_CONFIG_TYPENUM_MASK                    (0x0FFF)
+
+
+/*ExtPageType field values */
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT         (0x10)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER        (0x11)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE          (0x12)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY             (0x13)
+#define MPI2_CONFIG_EXTPAGETYPE_LOG                 (0x14)
+#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE           (0x15)
+#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG         (0x16)
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING      (0x17)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
+#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING   (0x1A)
+
+
+/*****************************************************************************
+*  PageAddress defines
+*****************************************************************************/
+
+/*RAID Volume PageAddress format */
+#define MPI2_RAID_VOLUME_PGAD_FORM_MASK             (0xF0000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE           (0x10000000)
+
+#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK           (0x0000FFFF)
+
+
+/*RAID Physical Disk PageAddress format */
+#define MPI2_PHYSDISK_PGAD_FORM_MASK                    (0xF0000000)
+#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM    (0x00000000)
+#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM             (0x10000000)
+#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE               (0x20000000)
+
+#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK             (0x000000FF)
+#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK               (0x0000FFFF)
+
+
+/*SAS Expander PageAddress format */
+#define MPI2_SAS_EXPAND_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL     (0x00000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM      (0x10000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL              (0x20000000)
+
+#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK            (0x0000FFFF)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK            (0x00FF0000)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT           (16)
+
+
+/*SAS Device PageAddress format */
+#define MPI2_SAS_DEVICE_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE            (0x20000000)
+
+#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK            (0x0000FFFF)
+
+
+/*SAS PHY PageAddress format */
+#define MPI2_SAS_PHY_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER           (0x00000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX        (0x10000000)
+
+#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK           (0x000000FF)
+#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK        (0x0000FFFF)
+
+
+/*SAS Port PageAddress format */
+#define MPI2_SASPORT_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT        (0x00000000)
+#define MPI2_SASPORT_PGAD_FORM_PORT_NUM             (0x10000000)
+
+#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK           (0x00000FFF)
+
+
+/*SAS Enclosure PageAddress format */
+#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE            (0x10000000)
+
+#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK            (0x0000FFFF)
+
+
+/*RAID Configuration PageAddress format */
+#define MPI2_RAID_PGAD_FORM_MASK                    (0xF0000000)
+#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM      (0x00000000)
+#define MPI2_RAID_PGAD_FORM_CONFIGNUM               (0x10000000)
+#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG           (0x20000000)
+
+#define MPI2_RAID_PGAD_CONFIGNUM_MASK               (0x000000FF)
+
+
+/*Driver Persistent Mapping PageAddress format */
+#define MPI2_DPM_PGAD_FORM_MASK                     (0xF0000000)
+#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE              (0x00000000)
+
+#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK              (0x0FFF0000)
+#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT             (16)
+#define MPI2_DPM_PGAD_START_ENTRY_MASK              (0x0000FFFF)
+
+
+/*Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK                (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM              (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)
+
+
+
+/****************************************************************************
+*  Configuration messages
+****************************************************************************/
+
+/*Configuration Request Message */
+typedef struct _MPI2_CONFIG_REQUEST {
+	U8                      Action;                     /*0x00 */
+	U8                      SGLFlags;                   /*0x01 */
+	U8                      ChainOffset;                /*0x02 */
+	U8                      Function;                   /*0x03 */
+	U16                     ExtPageLength;              /*0x04 */
+	U8                      ExtPageType;                /*0x06 */
+	U8                      MsgFlags;                   /*0x07 */
+	U8                      VP_ID;                      /*0x08 */
+	U8                      VF_ID;                      /*0x09 */
+	U16                     Reserved1;                  /*0x0A */
+	U8                      Reserved2;                  /*0x0C */
+	U8                      ProxyVF_ID;                 /*0x0D */
+	U16                     Reserved4;                  /*0x0E */
+	U32                     Reserved3;                  /*0x10 */
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x14 */
+	U32                     PageAddress;                /*0x18 */
+	MPI2_SGE_IO_UNION       PageBufferSGE;              /*0x1C */
+} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
+	Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
+
+/*values for the Action field */
+#define MPI2_CONFIG_ACTION_PAGE_HEADER              (0x00)
+#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT        (0x01)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT       (0x02)
+#define MPI2_CONFIG_ACTION_PAGE_DEFAULT             (0x03)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM         (0x04)
+#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT        (0x05)
+#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM          (0x06)
+#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE      (0x07)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+
+/*Config Reply Message */
+typedef struct _MPI2_CONFIG_REPLY {
+	U8                      Action;                     /*0x00 */
+	U8                      SGLFlags;                   /*0x01 */
+	U8                      MsgLength;                  /*0x02 */
+	U8                      Function;                   /*0x03 */
+	U16                     ExtPageLength;              /*0x04 */
+	U8                      ExtPageType;                /*0x06 */
+	U8                      MsgFlags;                   /*0x07 */
+	U8                      VP_ID;                      /*0x08 */
+	U8                      VF_ID;                      /*0x09 */
+	U16                     Reserved1;                  /*0x0A */
+	U16                     Reserved2;                  /*0x0C */
+	U16                     IOCStatus;                  /*0x0E */
+	U32                     IOCLogInfo;                 /*0x10 */
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x14 */
+} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
+	Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
+
+
+
+/*****************************************************************************
+*
+*              C o n f i g u r a t i o n    P a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************
+*  Manufacturing Config pages
+****************************************************************************/
+
+#define MPI2_MFGPAGE_VENDORID_LSI                   (0x1000)
+
+/*MPI v2.0 SAS products */
+#define MPI2_MFGPAGE_DEVID_SAS2004                  (0x0070)
+#define MPI2_MFGPAGE_DEVID_SAS2008                  (0x0072)
+#define MPI2_MFGPAGE_DEVID_SAS2108_1                (0x0074)
+#define MPI2_MFGPAGE_DEVID_SAS2108_2                (0x0076)
+#define MPI2_MFGPAGE_DEVID_SAS2108_3                (0x0077)
+#define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
+#define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)
+
+#define MPI2_MFGPAGE_DEVID_SSS6200                  (0x007E)
+
+#define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
+#define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
+#define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
+#define MPI2_MFGPAGE_DEVID_SAS2208_4                (0x0083)
+#define MPI2_MFGPAGE_DEVID_SAS2208_5                (0x0084)
+#define MPI2_MFGPAGE_DEVID_SAS2208_6                (0x0085)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1                (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2                (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)
+
+/*MPI v2.5 SAS products */
+#define MPI25_MFGPAGE_DEVID_SAS3004                 (0x0096)
+#define MPI25_MFGPAGE_DEVID_SAS3008                 (0x0097)
+#define MPI25_MFGPAGE_DEVID_SAS3108_1               (0x0090)
+#define MPI25_MFGPAGE_DEVID_SAS3108_2               (0x0091)
+#define MPI25_MFGPAGE_DEVID_SAS3108_5               (0x0094)
+#define MPI25_MFGPAGE_DEVID_SAS3108_6               (0x0095)
+
+
+
+
+/*Manufacturing Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      ChipName[16];               /*0x04 */
+	U8                      ChipRevision[8];            /*0x14 */
+	U8                      BoardName[16];              /*0x1C */
+	U8                      BoardAssembly[16];          /*0x2C */
+	U8                      BoardTracerNumber[16];      /*0x3C */
+} MPI2_CONFIG_PAGE_MAN_0,
+	*PTR_MPI2_CONFIG_PAGE_MAN_0,
+	Mpi2ManufacturingPage0_t,
+	*pMpi2ManufacturingPage0_t;
+
+#define MPI2_MANUFACTURING0_PAGEVERSION                (0x00)
+
+
+/*Manufacturing Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      VPD[256];                   /*0x04 */
+} MPI2_CONFIG_PAGE_MAN_1,
+	*PTR_MPI2_CONFIG_PAGE_MAN_1,
+	Mpi2ManufacturingPage1_t,
+	*pMpi2ManufacturingPage1_t;
+
+#define MPI2_MANUFACTURING1_PAGEVERSION                (0x00)
+
+
+typedef struct _MPI2_CHIP_REVISION_ID {
+	U16 DeviceID;                                       /*0x00 */
+	U8  PCIRevisionID;                                  /*0x02 */
+	U8  Reserved;                                       /*0x03 */
+} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
+	Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
+
+
+/*Manufacturing Page 2 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
+#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS   (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	MPI2_CHIP_REVISION_ID   ChipId;                     /*0x04 */
+	U32
+		HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_2,
+	*PTR_MPI2_CONFIG_PAGE_MAN_2,
+	Mpi2ManufacturingPage2_t,
+	*pMpi2ManufacturingPage2_t;
+
+#define MPI2_MANUFACTURING2_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
+#define MPI2_MAN_PAGE_3_INFO_WORDS          (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
+	MPI2_CONFIG_PAGE_HEADER             Header;         /*0x00 */
+	MPI2_CHIP_REVISION_ID               ChipId;         /*0x04 */
+	U32
+		Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_3,
+	*PTR_MPI2_CONFIG_PAGE_MAN_3,
+	Mpi2ManufacturingPage3_t,
+	*pMpi2ManufacturingPage3_t;
+
+#define MPI2_MANUFACTURING3_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 4 */
+
+typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
+	U8                          PowerSaveFlags;                 /*0x00 */
+	U8                          InternalOperationsSleepTime;    /*0x01 */
+	U8                          InternalOperationsRunTime;      /*0x02 */
+	U8                          HostIdleTime;                   /*0x03 */
+} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+	*PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+	Mpi2ManPage4PwrSaveSettings_t,
+	*pMpi2ManPage4PwrSaveSettings_t;
+
+/*defines for the PowerSaveFlags field */
+#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE               (0x03)
+#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED           (0x00)
+#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE             (0x01)
+#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE               (0x02)
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
+	MPI2_CONFIG_PAGE_HEADER             Header;                 /*0x00 */
+	U32                                 Reserved1;              /*0x04 */
+	U32                                 Flags;                  /*0x08 */
+	U8                                  InquirySize;            /*0x0C */
+	U8                                  Reserved2;              /*0x0D */
+	U16                                 Reserved3;              /*0x0E */
+	U8                                  InquiryData[56];        /*0x10 */
+	U32                                 RAID0VolumeSettings;    /*0x48 */
+	U32                                 RAID1EVolumeSettings;   /*0x4C */
+	U32                                 RAID1VolumeSettings;    /*0x50 */
+	U32                                 RAID10VolumeSettings;   /*0x54 */
+	U32                                 Reserved4;              /*0x58 */
+	U32                                 Reserved5;              /*0x5C */
+	MPI2_MANPAGE4_PWR_SAVE_SETTINGS     PowerSaveSettings;      /*0x60 */
+	U8                                  MaxOCEDisks;            /*0x64 */
+	U8                                  ResyncRate;             /*0x65 */
+	U16                                 DataScrubDuration;      /*0x66 */
+	U8                                  MaxHotSpares;           /*0x68 */
+	U8                                  MaxPhysDisksPerVol;     /*0x69 */
+	U8                                  MaxPhysDisks;           /*0x6A */
+	U8                                  MaxVolumes;             /*0x6B */
+} MPI2_CONFIG_PAGE_MAN_4,
+	*PTR_MPI2_CONFIG_PAGE_MAN_4,
+	Mpi2ManufacturingPage4_t,
+	*pMpi2ManufacturingPage4_t;
+
+#define MPI2_MANUFACTURING4_PAGEVERSION                 (0x0A)
+
+/*Manufacturing Page 4 Flags field */
+#define MPI2_MANPAGE4_METADATA_SIZE_MASK                (0x00030000)
+#define MPI2_MANPAGE4_METADATA_512MB                    (0x00000000)
+
+#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA                  (0x00008000)
+#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD               (0x00004000)
+#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR              (0x00002000)
+
+#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION            (0x00001C00)
+#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB             (0x00000000)
+#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION           (0x00000400)
+#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION        (0x00000800)
+#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION            (0x00000C00)
+
+#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING            (0x00000300)
+#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING         (0x00000000)
+#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING           (0x00000100)
+#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING      (0x00000200)
+
+#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER            (0x00000080)
+#define MPI2_MANPAGE4_RAID10_DISABLE                    (0x00000040)
+#define MPI2_MANPAGE4_RAID1E_DISABLE                    (0x00000020)
+#define MPI2_MANPAGE4_RAID1_DISABLE                     (0x00000010)
+#define MPI2_MANPAGE4_RAID0_DISABLE                     (0x00000008)
+#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE              (0x00000004)
+#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE            (0x00000002)
+#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA                (0x00000001)
+
+
+/*Manufacturing Page 5 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
+#define MPI2_MAN_PAGE_5_PHY_ENTRIES         (1)
+#endif
+
+typedef struct _MPI2_MANUFACTURING5_ENTRY {
+	U64                                 WWID;           /*0x00 */
+	U64                                 DeviceName;     /*0x08 */
+} MPI2_MANUFACTURING5_ENTRY,
+	*PTR_MPI2_MANUFACTURING5_ENTRY,
+	Mpi2Manufacturing5Entry_t,
+	*pMpi2Manufacturing5Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
+	MPI2_CONFIG_PAGE_HEADER             Header;         /*0x00 */
+	U8                                  NumPhys;        /*0x04 */
+	U8                                  Reserved1;      /*0x05 */
+	U16                                 Reserved2;      /*0x06 */
+	U32                                 Reserved3;      /*0x08 */
+	U32                                 Reserved4;      /*0x0C */
+	MPI2_MANUFACTURING5_ENTRY
+		Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_5,
+	*PTR_MPI2_CONFIG_PAGE_MAN_5,
+	Mpi2ManufacturingPage5_t,
+	*pMpi2ManufacturingPage5_t;
+
+#define MPI2_MANUFACTURING5_PAGEVERSION                 (0x03)
+
+
+/*Manufacturing Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_6,
+	*PTR_MPI2_CONFIG_PAGE_MAN_6,
+	Mpi2ManufacturingPage6_t,
+	*pMpi2ManufacturingPage6_t;
+
+#define MPI2_MANUFACTURING6_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 7 */
+
+typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
+	U32                         Pinout;                 /*0x00 */
+	U8                          Connector[16];          /*0x04 */
+	U8                          Location;               /*0x14 */
+	U8                          ReceptacleID;           /*0x15 */
+	U16                         Slot;                   /*0x16 */
+	U32                         Reserved2;              /*0x18 */
+} MPI2_MANPAGE7_CONNECTOR_INFO,
+	*PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
+	Mpi2ManPage7ConnectorInfo_t,
+	*pMpi2ManPage7ConnectorInfo_t;
+
+/*defines for the Pinout field */
+#define MPI2_MANPAGE7_PINOUT_LANE_MASK                  (0x0000FF00)
+#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT                 (8)
+
+#define MPI2_MANPAGE7_PINOUT_TYPE_MASK                  (0x000000FF)
+#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN               (0x00)
+#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE                (0x01)
+#define MPI2_MANPAGE7_PINOUT_SFF_8482                   (0x02)
+#define MPI2_MANPAGE7_PINOUT_SFF_8486                   (0x03)
+#define MPI2_MANPAGE7_PINOUT_SFF_8484                   (0x04)
+#define MPI2_MANPAGE7_PINOUT_SFF_8087                   (0x05)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I                (0x06)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I                (0x07)
+#define MPI2_MANPAGE7_PINOUT_SFF_8470                   (0x08)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088                   (0x09)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X                (0x0A)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X                (0x0B)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X               (0x0C)
+#define MPI2_MANPAGE7_PINOUT_SFF_8436                   (0x0D)
+
+/*defines for the Location field */
+#define MPI2_MANPAGE7_LOCATION_UNKNOWN                  (0x01)
+#define MPI2_MANPAGE7_LOCATION_INTERNAL                 (0x02)
+#define MPI2_MANPAGE7_LOCATION_EXTERNAL                 (0x04)
+#define MPI2_MANPAGE7_LOCATION_SWITCHABLE               (0x08)
+#define MPI2_MANPAGE7_LOCATION_AUTO                     (0x10)
+#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT              (0x20)
+#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED            (0x80)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX  (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             Reserved1;          /*0x04 */
+	U32                             Reserved2;          /*0x08 */
+	U32                             Flags;              /*0x0C */
+	U8                              EnclosureName[16];  /*0x10 */
+	U8                              NumPhys;            /*0x20 */
+	U8                              Reserved3;          /*0x21 */
+	U16                             Reserved4;          /*0x22 */
+	MPI2_MANPAGE7_CONNECTOR_INFO
+	ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
+} MPI2_CONFIG_PAGE_MAN_7,
+	*PTR_MPI2_CONFIG_PAGE_MAN_7,
+	Mpi2ManufacturingPage7_t,
+	*pMpi2ManufacturingPage7_t;
+
+#define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
+
+/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
+
+
+/*
+ *Generic structure to use for product-specific manufacturing pages
+ *(currently Manufacturing Page 8 through Manufacturing Page 31).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_PS,
+	*PTR_MPI2_CONFIG_PAGE_MAN_PS,
+	Mpi2ManufacturingPagePS_t,
+	*pMpi2ManufacturingPagePS_t;
+
+#define MPI2_MANUFACTURING8_PAGEVERSION                 (0x00)
+#define MPI2_MANUFACTURING9_PAGEVERSION                 (0x00)
+#define MPI2_MANUFACTURING10_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING11_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING12_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING13_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING14_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING15_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING16_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING17_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING18_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING19_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING20_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING21_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING22_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING23_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING24_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING25_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING26_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING27_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING28_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING29_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING30_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING31_PAGEVERSION                (0x00)
+
+
+/****************************************************************************
+*  IO Unit Config Pages
+****************************************************************************/
+
+/*IO Unit Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U64                     UniqueValue;                /*0x04 */
+	MPI2_VERSION_UNION      NvdataVersionDefault;       /*0x08 */
+	MPI2_VERSION_UNION      NvdataVersionPersistent;    /*0x0A */
+} MPI2_CONFIG_PAGE_IO_UNIT_0,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
+	Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
+
+#define MPI2_IOUNITPAGE0_PAGEVERSION                    (0x02)
+
+
+/*IO Unit Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Flags;                      /*0x04 */
+} MPI2_CONFIG_PAGE_IO_UNIT_1,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
+	Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
+
+#define MPI2_IOUNITPAGE1_PAGEVERSION                    (0x04)
+
+/*IO Unit Page 1 Flags defines */
+#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE  (0x00002000)
+#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH             (0x00001000)
+#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY    (0x00000800)
+#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE          (0x00000600)
+#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT         (9)
+#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE        (0x00000000)
+#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE       (0x00000200)
+#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE     (0x00000400)
+#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE       (0x00000100)
+#define MPI2_IOUNITPAGE1_DISABLE_IR                     (0x00000040)
+#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
+#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID        (0x00000004)
+
+
+/*IO Unit Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for GPIOCount at runtime.
+ */
+#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
+#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
+	MPI2_CONFIG_PAGE_HEADER Header;			 /*0x00 */
+	U8                      GPIOCount;		 /*0x04 */
+	U8                      Reserved1;		 /*0x05 */
+	U16                     Reserved2;		 /*0x06 */
+	U16
+		GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
+} MPI2_CONFIG_PAGE_IO_UNIT_3,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
+	Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
+
+#define MPI2_IOUNITPAGE3_PAGEVERSION                    (0x01)
+
+/*defines for IO Unit Page 3 GPIOVal field */
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK             (0xFFFC)
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT            (2)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF               (0x0000)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON                (0x0001)
+
+
+/*IO Unit Page 5 */
+
+/*
+ *Upper layer code (drivers, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U64
+		RaidAcceleratorBufferBaseAddress;           /*0x04 */
+	U64
+		RaidAcceleratorBufferSize;                  /*0x0C */
+	U64
+		RaidAcceleratorControlBaseAddress;          /*0x14 */
+	U8                      RAControlSize;              /*0x1C */
+	U8                      NumDmaEngines;              /*0x1D */
+	U8                      RAMinControlSize;           /*0x1E */
+	U8                      RAMaxControlSize;           /*0x1F */
+	U32                     Reserved1;                  /*0x20 */
+	U32                     Reserved2;                  /*0x24 */
+	U32                     Reserved3;                  /*0x28 */
+	U32
+	DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+	Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION                    (0x00)
+
+/*defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS      (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS     (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP                   (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION      (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING                (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION             (0x0001)
+
+
+/*IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U16                     Flags;                  /*0x04 */
+	U8                      RAHostControlSize;      /*0x06 */
+	U8                      Reserved0;              /*0x07 */
+	U64
+		RaidAcceleratorHostControlBaseAddress;  /*0x08 */
+	U32                     Reserved1;              /*0x10 */
+	U32                     Reserved2;              /*0x14 */
+	U32                     Reserved3;              /*0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+	Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION                    (0x00)
+
+/*defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)
+
+
+/*IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U8                      CurrentPowerMode;       /*0x04 */
+	U8                      PreviousPowerMode;      /*0x05 */
+	U8                      PCIeWidth;              /*0x06 */
+	U8                      PCIeSpeed;              /*0x07 */
+	U32                     ProcessorState;         /*0x08 */
+	U32
+		PowerManagementCapabilities;            /*0x0C */
+	U16                     IOCTemperature;         /*0x10 */
+	U8
+		IOCTemperatureUnits;                    /*0x12 */
+	U8                      IOCSpeed;               /*0x13 */
+	U16                     BoardTemperature;       /*0x14 */
+	U8
+		BoardTemperatureUnits;                  /*0x16 */
+	U8                      Reserved3;              /*0x17 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+	Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x02)
+
+/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
+#define MPI25_IOUNITPAGE7_PM_INIT_MASK              (0xC0)
+#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE       (0x00)
+#define MPI25_IOUNITPAGE7_PM_INIT_HOST              (0x40)
+#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT           (0x80)
+#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA          (0xC0)
+
+#define MPI25_IOUNITPAGE7_PM_MODE_MASK              (0x07)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE       (0x00)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN           (0x01)
+#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER        (0x04)
+#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER     (0x05)
+#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY           (0x06)
+
+
+/*defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)
+
+/*defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)
+
+/*defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND        (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT         (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)
+
+/*defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE       (0x00400000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE    (0x00200000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE        (0x00100000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE      (0x00040000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE   (0x00020000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE       (0x00010000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE        (0x00004000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE     (0x00002000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE         (0x00001000)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED   (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED   (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED   (0x00000100)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED    (0x00000040)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED    (0x00000020)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED    (0x00000010)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE   (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE   (0x00000004)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE    (0x00000002)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE    (0x00000001)
+
+/*obsolete names for the PowerManagementCapabilities bits (above) */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED    (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED    (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED    (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE    (0x00000008) /*obsolete */
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE    (0x00000004) /*obsolete */
+
+
+/*defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS           (0x02)
+
+/*defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL             (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF             (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER          (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH           (0x08)
+
+/*defines for IO Unit Page 7 BoardTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT     (0x00)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)
+
+
+/*IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+	U16                     Flags;                  /*0x00 */
+	U16                     Reserved1;              /*0x02 */
+	U16
+		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
+	U32                     Reserved2;              /*0x0C */
+	U32                     Reserved3;              /*0x10 */
+	U32                     Reserved4;              /*0x14 */
+} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
+	Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
+
+/*defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U32                     Reserved1;              /*0x04 */
+	U32                     Reserved2;              /*0x08 */
+	U8                      NumSensors;             /*0x0C */
+	U8                      PollingInterval;        /*0x0D */
+	U16                     Reserved3;              /*0x0E */
+	MPI2_IOUNIT8_SENSOR
+		Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+	Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)
+
+
+/*IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+	U16                     CurrentTemperature;     /*0x00 */
+	U16                     Reserved1;              /*0x02 */
+	U8                      Flags;                  /*0x04 */
+	U8                      Reserved2;              /*0x05 */
+	U16                     Reserved3;              /*0x06 */
+	U32                     Reserved4;              /*0x08 */
+	U32                     Reserved5;              /*0x0C */
+} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
+	Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
+
+/*defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U32                     Reserved1;              /*0x04 */
+	U32                     Reserved2;              /*0x08 */
+	U8                      NumSensors;             /*0x0C */
+	U8                      Reserved4;              /*0x0D */
+	U16                     Reserved3;              /*0x0E */
+	MPI2_IOUNIT9_SENSOR
+		Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+	Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)
+
+
+/*IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+	U8                      CreditPercent;      /*0x00 */
+	U8                      Reserved1;          /*0x01 */
+	U16                     Reserved2;          /*0x02 */
+} MPI2_IOUNIT10_FUNCTION,
+	*PTR_MPI2_IOUNIT10_FUNCTION,
+	Mpi2IOUnit10Function_t,
+	*pMpi2IOUnit10Function_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+	MPI2_CONFIG_PAGE_HEADER Header;                      /*0x00 */
+	U8                      NumFunctions;                /*0x04 */
+	U8                      Reserved1;                   /*0x05 */
+	U16                     Reserved2;                   /*0x06 */
+	U32                     Reserved3;                   /*0x08 */
+	U32                     Reserved4;                   /*0x0C */
+	MPI2_IOUNIT10_FUNCTION
+		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+	Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)
+
+
+
+/****************************************************************************
+*  IOC Config Pages
+****************************************************************************/
+
+/*IOC Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Reserved1;                  /*0x04 */
+	U32                     Reserved2;                  /*0x08 */
+	U16                     VendorID;                   /*0x0C */
+	U16                     DeviceID;                   /*0x0E */
+	U8                      RevisionID;                 /*0x10 */
+	U8                      Reserved3;                  /*0x11 */
+	U16                     Reserved4;                  /*0x12 */
+	U32                     ClassCode;                  /*0x14 */
+	U16                     SubsystemVendorID;          /*0x18 */
+	U16                     SubsystemID;                /*0x1A */
+} MPI2_CONFIG_PAGE_IOC_0,
+	*PTR_MPI2_CONFIG_PAGE_IOC_0,
+	Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
+
+#define MPI2_IOCPAGE0_PAGEVERSION                       (0x02)
+
+
+/*IOC Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Flags;                      /*0x04 */
+	U32                     CoalescingTimeout;          /*0x08 */
+	U8                      CoalescingDepth;            /*0x0C */
+	U8                      PCISlotNum;                 /*0x0D */
+	U8                      PCIBusNum;                  /*0x0E */
+	U8                      PCIDomainSegment;           /*0x0F */
+	U32                     Reserved1;                  /*0x10 */
+	U32                     Reserved2;                  /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_1,
+	*PTR_MPI2_CONFIG_PAGE_IOC_1,
+	Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
+
+#define MPI2_IOCPAGE1_PAGEVERSION                       (0x05)
+
+/*defines for IOC Page 1 Flags field */
+#define MPI2_IOCPAGE1_REPLY_COALESCING                  (0x00000001)
+
+#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN                (0xFF)
+#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN                 (0xFF)
+#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN                 (0xFF)
+
+/*IOC Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
+	MPI2_CONFIG_PAGE_HEADER Header;         /*0x00 */
+	U32
+		CapabilitiesFlags;              /*0x04 */
+	U8                      MaxDrivesRAID0; /*0x08 */
+	U8                      MaxDrivesRAID1; /*0x09 */
+	U8
+		 MaxDrivesRAID1E;                /*0x0A */
+	U8
+		 MaxDrivesRAID10;		/*0x0B */
+	U8                      MinDrivesRAID0; /*0x0C */
+	U8                      MinDrivesRAID1; /*0x0D */
+	U8
+		 MinDrivesRAID1E;                /*0x0E */
+	U8
+		 MinDrivesRAID10;                /*0x0F */
+	U32                     Reserved1;      /*0x10 */
+	U8
+		 MaxGlobalHotSpares;             /*0x14 */
+	U8                      MaxPhysDisks;   /*0x15 */
+	U8                      MaxVolumes;     /*0x16 */
+	U8                      MaxConfigs;     /*0x17 */
+	U8                      MaxOCEDisks;    /*0x18 */
+	U8                      Reserved2;      /*0x19 */
+	U16                     Reserved3;      /*0x1A */
+	U32
+		SupportedStripeSizeMapRAID0;    /*0x1C */
+	U32
+		SupportedStripeSizeMapRAID1E;   /*0x20 */
+	U32
+		SupportedStripeSizeMapRAID10;   /*0x24 */
+	U32                     Reserved4;      /*0x28 */
+	U32                     Reserved5;      /*0x2C */
+	U16
+		DefaultMetadataSize;            /*0x30 */
+	U16                     Reserved6;      /*0x32 */
+	U16
+		MaxBadBlockTableEntries;        /*0x34 */
+	U16                     Reserved7;      /*0x36 */
+	U32
+		IRNvsramVersion;                /*0x38 */
+} MPI2_CONFIG_PAGE_IOC_6,
+	*PTR_MPI2_CONFIG_PAGE_IOC_6,
+	Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
+
+#define MPI2_IOCPAGE6_PAGEVERSION                       (0x05)
+
+/*defines for IOC Page 6 CapabilitiesFlags */
+#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT      (0x00000020)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT          (0x00000010)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT           (0x00000008)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT          (0x00000004)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT           (0x00000002)
+#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE        (0x00000001)
+
+
+/*IOC Page 7 */
+
+#define MPI2_IOCPAGE7_EVENTMASK_WORDS       (4)
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Reserved1;                  /*0x04 */
+	U32
+		EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
+	U16                     SASBroadcastPrimitiveMasks; /*0x18 */
+	U16                     SASNotifyPrimitiveMasks;    /*0x1A */
+	U32                     Reserved3;                  /*0x1C */
+} MPI2_CONFIG_PAGE_IOC_7,
+	*PTR_MPI2_CONFIG_PAGE_IOC_7,
+	Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
+
+#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)
+
+
+/*IOC Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      NumDevsPerEnclosure;        /*0x04 */
+	U8                      Reserved1;                  /*0x05 */
+	U16                     Reserved2;                  /*0x06 */
+	U16                     MaxPersistentEntries;       /*0x08 */
+	U16                     MaxNumPhysicalMappedIDs;    /*0x0A */
+	U16                     Flags;                      /*0x0C */
+	U16                     Reserved3;                  /*0x0E */
+	U16                     IRVolumeMappingFlags;       /*0x10 */
+	U16                     Reserved4;                  /*0x12 */
+	U32                     Reserved5;                  /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_8,
+	*PTR_MPI2_CONFIG_PAGE_IOC_8,
+	Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
+
+#define MPI2_IOCPAGE8_PAGEVERSION                       (0x00)
+
+/*defines for IOC Page 8 Flags field */
+#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1             (0x00000020)
+#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0         (0x00000010)
+
+#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE           (0x0000000E)
+#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING  (0x00000000)
+#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING      (0x00000002)
+
+#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING  (0x00000001)
+#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING   (0x00000000)
+
+/*defines for IOC Page 8 IRVolumeMappingFlags */
+#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE  (0x00000003)
+#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING        (0x00000000)
+#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING       (0x00000001)
+
+
+/****************************************************************************
+*  BIOS Config Pages
+****************************************************************************/
+
+/*BIOS Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     BiosOptions;                /*0x04 */
+	U32                     IOCSettings;                /*0x08 */
+	U32                     Reserved1;                  /*0x0C */
+	U32                     DeviceSettings;             /*0x10 */
+	U16                     NumberOfDevices;            /*0x14 */
+	U16                     UEFIVersion;                /*0x16 */
+	U16                     IOTimeoutBlockDevicesNonRM; /*0x18 */
+	U16                     IOTimeoutSequential;        /*0x1A */
+	U16                     IOTimeoutOther;             /*0x1C */
+	U16                     IOTimeoutBlockDevicesRM;    /*0x1E */
+} MPI2_CONFIG_PAGE_BIOS_1,
+	*PTR_MPI2_CONFIG_PAGE_BIOS_1,
+	Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
+
+#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x05)
+
+/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION   (0x00000006)
+#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII              (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII             (0x00000002)
+#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII       (0x00000004)
+
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS                 (0x00000001)
+
+/*values for BIOS Page 1 IOCSettings field */
+#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE      (0x00030000)
+#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT       (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT          (0x00010000)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING           (0x000000C0)
+#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING           (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING           (0x00000040)
+#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING          (0x00000080)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT      (0x00000030)
+#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT                (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT              (0x00000010)
+#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT                (0x00000020)
+#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT               (0x00000030)
+
+#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS             (0x00000008)
+
+/*values for BIOS Page 1 DeviceSettings field */
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING     (0x00000010)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN           (0x00000008)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN            (0x00000004)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN        (0x00000002)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN         (0x00000001)
+
+/*defines for BIOS Page 1 UEFIVersion field */
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK              (0xFF00)
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT             (8)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK              (0x00FF)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT             (0)
+
+
+
+/*BIOS Page 2 */
+
+typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
+	U32         Reserved1;                              /*0x00 */
+	U32         Reserved2;                              /*0x04 */
+	U32         Reserved3;                              /*0x08 */
+	U32         Reserved4;                              /*0x0C */
+	U32         Reserved5;                              /*0x10 */
+	U32         Reserved6;                              /*0x14 */
+} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+	*PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+	Mpi2BootDeviceAdapterOrder_t,
+	*pMpi2BootDeviceAdapterOrder_t;
+
+typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
+	U64         SASAddress;                             /*0x00 */
+	U8          LUN[8];                                 /*0x08 */
+	U32         Reserved1;                              /*0x10 */
+	U32         Reserved2;                              /*0x14 */
+} MPI2_BOOT_DEVICE_SAS_WWID,
+	*PTR_MPI2_BOOT_DEVICE_SAS_WWID,
+	Mpi2BootDeviceSasWwid_t,
+	*pMpi2BootDeviceSasWwid_t;
+
+typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
+	U64         EnclosureLogicalID;                     /*0x00 */
+	U32         Reserved1;                              /*0x08 */
+	U32         Reserved2;                              /*0x0C */
+	U16         SlotNumber;                             /*0x10 */
+	U16         Reserved3;                              /*0x12 */
+	U32         Reserved4;                              /*0x14 */
+} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+	*PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+	Mpi2BootDeviceEnclosureSlot_t,
+	*pMpi2BootDeviceEnclosureSlot_t;
+
+typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
+	U64         DeviceName;                             /*0x00 */
+	U8          LUN[8];                                 /*0x08 */
+	U32         Reserved1;                              /*0x10 */
+	U32         Reserved2;                              /*0x14 */
+} MPI2_BOOT_DEVICE_DEVICE_NAME,
+	*PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
+	Mpi2BootDeviceDeviceName_t,
+	*pMpi2BootDeviceDeviceName_t;
+
+typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
+	MPI2_BOOT_DEVICE_ADAPTER_ORDER  AdapterOrder;
+	MPI2_BOOT_DEVICE_SAS_WWID       SasWwid;
+	MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
+	MPI2_BOOT_DEVICE_DEVICE_NAME    DeviceName;
+} MPI2_BIOSPAGE2_BOOT_DEVICE,
+	*PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
+	Mpi2BiosPage2BootDevice_t,
+	*pMpi2BiosPage2BootDevice_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
+	MPI2_CONFIG_PAGE_HEADER     Header;                 /*0x00 */
+	U32                         Reserved1;              /*0x04 */
+	U32                         Reserved2;              /*0x08 */
+	U32                         Reserved3;              /*0x0C */
+	U32                         Reserved4;              /*0x10 */
+	U32                         Reserved5;              /*0x14 */
+	U32                         Reserved6;              /*0x18 */
+	U8                          ReqBootDeviceForm;      /*0x1C */
+	U8                          Reserved7;              /*0x1D */
+	U16                         Reserved8;              /*0x1E */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedBootDevice;    /*0x20 */
+	U8                          ReqAltBootDeviceForm;   /*0x38 */
+	U8                          Reserved9;              /*0x39 */
+	U16                         Reserved10;             /*0x3A */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedAltBootDevice; /*0x3C */
+	U8                          CurrentBootDeviceForm;  /*0x58 */
+	U8                          Reserved11;             /*0x59 */
+	U16                         Reserved12;             /*0x5A */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  CurrentBootDevice;      /*0x58 */
+} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
+	Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
+
+#define MPI2_BIOSPAGE2_PAGEVERSION                      (0x04)
+
+/*values for BIOS Page 2 BootDeviceForm fields */
+#define MPI2_BIOSPAGE2_FORM_MASK                        (0x0F)
+#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED         (0x00)
+#define MPI2_BIOSPAGE2_FORM_SAS_WWID                    (0x05)
+#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT              (0x06)
+#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME                 (0x07)
+
+
+/*BIOS Page 3 */
+
+typedef struct _MPI2_ADAPTER_INFO {
+	U8      PciBusNumber;                        /*0x00 */
+	U8      PciDeviceAndFunctionNumber;          /*0x01 */
+	U16     AdapterFlags;                        /*0x02 */
+} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
+	Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
+
+#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED                (0x0001)
+#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS             (0x0002)
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
+	MPI2_CONFIG_PAGE_HEADER Header;              /*0x00 */
+	U32                     GlobalFlags;         /*0x04 */
+	U32                     BiosVersion;         /*0x08 */
+	MPI2_ADAPTER_INFO       AdapterOrder[4];     /*0x0C */
+	U32                     Reserved1;           /*0x1C */
+} MPI2_CONFIG_PAGE_BIOS_3,
+	*PTR_MPI2_CONFIG_PAGE_BIOS_3,
+	Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
+
+#define MPI2_BIOSPAGE3_PAGEVERSION                      (0x00)
+
+/*values for BIOS Page 3 GlobalFlags */
+#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR             (0x00000002)
+#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE             (0x00000004)
+#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE        (0x00000010)
+
+#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK      (0x000000E0)
+#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY      (0x00000000)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY            (0x00000020)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY        (0x00000040)
+
+
+/*BIOS Page 4 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
+#define MPI2_BIOS_PAGE_4_PHY_ENTRIES        (1)
+#endif
+
+typedef struct _MPI2_BIOS4_ENTRY {
+	U64                     ReassignmentWWID;       /*0x00 */
+	U64                     ReassignmentDeviceName; /*0x08 */
+} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
+	Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
+	MPI2_CONFIG_PAGE_HEADER Header;             /*0x00 */
+	U8                      NumPhys;            /*0x04 */
+	U8                      Reserved1;          /*0x05 */
+	U16                     Reserved2;          /*0x06 */
+	MPI2_BIOS4_ENTRY
+		Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES];  /*0x08 */
+} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
+	Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
+
+#define MPI2_BIOSPAGE4_PAGEVERSION                      (0x01)
+
+
+/****************************************************************************
+*  RAID Volume Config Pages
+****************************************************************************/
+
+/*RAID Volume Page 0 */
+
+typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
+	U8                      RAIDSetNum;        /*0x00 */
+	U8                      PhysDiskMap;       /*0x01 */
+	U8                      PhysDiskNum;       /*0x02 */
+	U8                      Reserved;          /*0x03 */
+} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
+	Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY                  (0x01)
+#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY                (0x02)
+
+typedef struct _MPI2_RAIDVOL0_SETTINGS {
+	U16                     Settings;          /*0x00 */
+	U8                      HotSparePool;      /*0x01 */
+	U8                      Reserved;          /*0x02 */
+} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
+	Mpi2RaidVol0Settings_t,
+	*pMpi2RaidVol0Settings_t;
+
+/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
+#define MPI2_RAID_HOT_SPARE_POOL_0                      (0x01)
+#define MPI2_RAID_HOT_SPARE_POOL_1                      (0x02)
+#define MPI2_RAID_HOT_SPARE_POOL_2                      (0x04)
+#define MPI2_RAID_HOT_SPARE_POOL_3                      (0x08)
+#define MPI2_RAID_HOT_SPARE_POOL_4                      (0x10)
+#define MPI2_RAID_HOT_SPARE_POOL_5                      (0x20)
+#define MPI2_RAID_HOT_SPARE_POOL_6                      (0x40)
+#define MPI2_RAID_HOT_SPARE_POOL_7                      (0x80)
+
+/*RAID Volume Page 0 VolumeSettings defines */
+#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX     (0x0008)
+#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
+
+#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING        (0x0003)
+#define MPI2_RAIDVOL0_SETTING_UNCHANGED                 (0x0000)
+#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING     (0x0001)
+#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING      (0x0002)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDisks at runtime.
+ */
+#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
+#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX       (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;            /*0x00 */
+	U16                     DevHandle;         /*0x04 */
+	U8                      VolumeState;       /*0x06 */
+	U8                      VolumeType;        /*0x07 */
+	U32                     VolumeStatusFlags; /*0x08 */
+	MPI2_RAIDVOL0_SETTINGS  VolumeSettings;    /*0x0C */
+	U64                     MaxLBA;            /*0x10 */
+	U32                     StripeSize;        /*0x18 */
+	U16                     BlockSize;         /*0x1C */
+	U16                     Reserved1;         /*0x1E */
+	U8                      SupportedPhysDisks;/*0x20 */
+	U8                      ResyncRate;        /*0x21 */
+	U16                     DataScrubDuration; /*0x22 */
+	U8                      NumPhysDisks;      /*0x24 */
+	U8                      Reserved2;         /*0x25 */
+	U8                      Reserved3;         /*0x26 */
+	U8                      InactiveStatus;    /*0x27 */
+	MPI2_RAIDVOL0_PHYS_DISK
+	PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
+} MPI2_CONFIG_PAGE_RAID_VOL_0,
+	*PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
+	Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
+
+#define MPI2_RAIDVOLPAGE0_PAGEVERSION           (0x0A)
+
+/*values for RAID VolumeState */
+#define MPI2_RAID_VOL_STATE_MISSING                         (0x00)
+#define MPI2_RAID_VOL_STATE_FAILED                          (0x01)
+#define MPI2_RAID_VOL_STATE_INITIALIZING                    (0x02)
+#define MPI2_RAID_VOL_STATE_ONLINE                          (0x03)
+#define MPI2_RAID_VOL_STATE_DEGRADED                        (0x04)
+#define MPI2_RAID_VOL_STATE_OPTIMAL                         (0x05)
+
+/*values for RAID VolumeType */
+#define MPI2_RAID_VOL_TYPE_RAID0                            (0x00)
+#define MPI2_RAID_VOL_TYPE_RAID1E                           (0x01)
+#define MPI2_RAID_VOL_TYPE_RAID1                            (0x02)
+#define MPI2_RAID_VOL_TYPE_RAID10                           (0x05)
+#define MPI2_RAID_VOL_TYPE_UNKNOWN                          (0xFF)
+
+/*values for RAID Volume Page 0 VolumeStatusFlags field */
+#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC            (0x02000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING        (0x01000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING               (0x00800000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING      (0x00400000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT      (0x00200000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB                (0x00100000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK         (0x00080000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION        (0x00040000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT           (0x00020000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS        (0x00010000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT        (0x00000080)
+#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED               (0x00000040)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE              (0x00000020)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR          (0x00000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR        (0x00000010)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL      (0x00000008)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE           (0x00000004)
+#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED                  (0x00000002)
+#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED                   (0x00000001)
+
+/*values for RAID Volume Page 0 SupportedPhysDisks field */
+#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS             (0x08)
+#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS                    (0x04)
+#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL                  (0x02)
+#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL                 (0x01)
+
+/*values for RAID Volume Page 0 InactiveStatus field */
+#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE                  (0x00)
+#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE           (0x01)
+#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE           (0x02)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE    (0x03)
+#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE             (0x04)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE    (0x05)
+#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED                (0x06)
+
+
+/*RAID Volume Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U16                     DevHandle;                  /*0x04 */
+	U16                     Reserved0;                  /*0x06 */
+	U8                      GUID[24];                   /*0x08 */
+	U8                      Name[16];                   /*0x20 */
+	U64                     WWID;                       /*0x30 */
+	U32                     Reserved1;                  /*0x38 */
+	U32                     Reserved2;                  /*0x3C */
+} MPI2_CONFIG_PAGE_RAID_VOL_1,
+	*PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
+	Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
+
+#define MPI2_RAIDVOLPAGE1_PAGEVERSION           (0x03)
+
+
+/****************************************************************************
+*  RAID Physical Disk Config Pages
+****************************************************************************/
+
+/*RAID Physical Disk Page 0 */
+
+typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
+	U16                     Reserved1;                  /*0x00 */
+	U8                      HotSparePool;               /*0x02 */
+	U8                      Reserved2;                  /*0x03 */
+} MPI2_RAIDPHYSDISK0_SETTINGS,
+	*PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
+	Mpi2RaidPhysDisk0Settings_t,
+	*pMpi2RaidPhysDisk0Settings_t;
+
+/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
+
+typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
+	U8                      VendorID[8];                /*0x00 */
+	U8                      ProductID[16];              /*0x08 */
+	U8                      ProductRevLevel[4];         /*0x18 */
+	U8                      SerialNum[32];              /*0x1C */
+} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+	*PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+	Mpi2RaidPhysDisk0InquiryData_t,
+	*pMpi2RaidPhysDisk0InquiryData_t;
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U16                             DevHandle;          /*0x04 */
+	U8                              Reserved1;          /*0x06 */
+	U8                              PhysDiskNum;        /*0x07 */
+	MPI2_RAIDPHYSDISK0_SETTINGS     PhysDiskSettings;   /*0x08 */
+	U32                             Reserved2;          /*0x0C */
+	MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData;        /*0x10 */
+	U32                             Reserved3;          /*0x4C */
+	U8                              PhysDiskState;      /*0x50 */
+	U8                              OfflineReason;      /*0x51 */
+	U8                              IncompatibleReason; /*0x52 */
+	U8                              PhysDiskAttributes; /*0x53 */
+	U32                             PhysDiskStatusFlags;/*0x54 */
+	U64                             DeviceMaxLBA;       /*0x58 */
+	U64                             HostMaxLBA;         /*0x60 */
+	U64                             CoercedMaxLBA;      /*0x68 */
+	U16                             BlockSize;          /*0x70 */
+	U16                             Reserved5;          /*0x72 */
+	U32                             Reserved6;          /*0x74 */
+} MPI2_CONFIG_PAGE_RD_PDISK_0,
+	*PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
+	Mpi2RaidPhysDiskPage0_t,
+	*pMpi2RaidPhysDiskPage0_t;
+
+#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION          (0x05)
+
+/*PhysDiskState defines */
+#define MPI2_RAID_PD_STATE_NOT_CONFIGURED               (0x00)
+#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE               (0x01)
+#define MPI2_RAID_PD_STATE_OFFLINE                      (0x02)
+#define MPI2_RAID_PD_STATE_ONLINE                       (0x03)
+#define MPI2_RAID_PD_STATE_HOT_SPARE                    (0x04)
+#define MPI2_RAID_PD_STATE_DEGRADED                     (0x05)
+#define MPI2_RAID_PD_STATE_REBUILDING                   (0x06)
+#define MPI2_RAID_PD_STATE_OPTIMAL                      (0x07)
+
+/*OfflineReason defines */
+#define MPI2_PHYSDISK0_ONLINE                           (0x00)
+#define MPI2_PHYSDISK0_OFFLINE_MISSING                  (0x01)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED                   (0x03)
+#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING             (0x04)
+#define MPI2_PHYSDISK0_OFFLINE_REQUESTED                (0x05)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED         (0x06)
+#define MPI2_PHYSDISK0_OFFLINE_OTHER                    (0xFF)
+
+/*IncompatibleReason defines */
+#define MPI2_PHYSDISK0_COMPATIBLE                       (0x00)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL            (0x01)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE           (0x02)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA             (0x03)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD   (0x04)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA    (0x05)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE          (0x06)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN             (0xFF)
+
+/*PhysDiskAttributes defines */
+#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK                (0x0C)
+#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE         (0x08)
+#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE           (0x04)
+
+#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK             (0x03)
+#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL              (0x02)
+#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL             (0x01)
+
+/*PhysDiskStatusFlags defines */
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED        (0x00000040)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET           (0x00000020)
+#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED  (0x00000010)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS     (0x00000000)
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
+#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME      (0x00000004)
+#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED             (0x00000002)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC          (0x00000001)
+
+
+/*RAID Physical Disk Page 1 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
+#define MPI2_RAID_PHYS_DISK1_PATH_MAX   (1)
+#endif
+
+typedef struct _MPI2_RAIDPHYSDISK1_PATH {
+	U16             DevHandle;          /*0x00 */
+	U16             Reserved1;          /*0x02 */
+	U64             WWID;               /*0x04 */
+	U64             OwnerWWID;          /*0x0C */
+	U8              OwnerIdentifier;    /*0x14 */
+	U8              Reserved2;          /*0x15 */
+	U16             Flags;              /*0x16 */
+} MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
+	Mpi2RaidPhysDisk1Path_t,
+	*pMpi2RaidPhysDisk1Path_t;
+
+/*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
+#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY        (0x0004)
+#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN         (0x0002)
+#define MPI2_RAID_PHYSDISK1_FLAG_INVALID        (0x0001)
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U8                              NumPhysDiskPaths;   /*0x04 */
+	U8                              PhysDiskNum;        /*0x05 */
+	U16                             Reserved1;          /*0x06 */
+	U32                             Reserved2;          /*0x08 */
+	MPI2_RAIDPHYSDISK1_PATH
+		PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
+} MPI2_CONFIG_PAGE_RD_PDISK_1,
+	*PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
+	Mpi2RaidPhysDiskPage1_t,
+	*pMpi2RaidPhysDiskPage1_t;
+
+#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION          (0x02)
+
+
+/****************************************************************************
+*  values for fields used by several types of SAS Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL             (0xF0)
+#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL            (4)
+#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL            (0x0F)
+/*link rates used for Negotiated Physical and Logical Link Rate */
+#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE        (0x00)
+#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED             (0x01)
+#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED       (0x02)
+#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
+#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
+#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
+#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
+#define MPI2_SAS_NEG_LINK_RATE_1_5                      (0x08)
+#define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
+#define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)
+#define MPI25_SAS_NEG_LINK_RATE_12_0                    (0x0B)
+
+
+/*values for AttachedPhyInfo fields */
+#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT       (0x00000040)
+#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS        (0x00000020)
+#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE           (0x00000010)
+
+#define MPI2_SAS_APHYINFO_REASON_MASK                   (0x0000000F)
+#define MPI2_SAS_APHYINFO_REASON_UNKNOWN                (0x00000000)
+#define MPI2_SAS_APHYINFO_REASON_POWER_ON               (0x00000001)
+#define MPI2_SAS_APHYINFO_REASON_HARD_RESET             (0x00000002)
+#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL        (0x00000003)
+#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC           (0x00000004)
+#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ       (0x00000005)
+#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER    (0x00000006)
+#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT          (0x00000007)
+#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED       (0x00000008)
+
+
+/*values for PhyInfo fields */
+#define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
+#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION      (27)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)
+
+#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS       (0x04000000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT        (0x02000000)
+#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS               (0x01000000)
+#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT          (0x00400000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS                   (0x00200000)
+#define MPI2_SAS_PHYINFO_ZONING_ENABLED                 (0x00100000)
+
+#define MPI2_SAS_PHYINFO_REASON_MASK                    (0x000F0000)
+#define MPI2_SAS_PHYINFO_REASON_UNKNOWN                 (0x00000000)
+#define MPI2_SAS_PHYINFO_REASON_POWER_ON                (0x00010000)
+#define MPI2_SAS_PHYINFO_REASON_HARD_RESET              (0x00020000)
+#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL         (0x00030000)
+#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC            (0x00040000)
+#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ        (0x00050000)
+#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER     (0x00060000)
+#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT           (0x00070000)
+#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED        (0x00080000)
+
+#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED         (0x00008000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE               (0x00004000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT     (0x00002000)
+#define MPI2_SAS_PHYINFO_VIRTUAL_PHY                    (0x00001000)
+
+#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME      (0x00000F00)
+#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME     (8)
+
+#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE         (0x000000F0)
+#define MPI2_SAS_PHYINFO_DIRECT_ROUTING                 (0x00000000)
+#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING            (0x00000010)
+#define MPI2_SAS_PHYINFO_TABLE_ROUTING                  (0x00000020)
+
+
+/*values for SAS ProgrammedLinkRate fields */
+#define MPI2_SAS_PRATE_MAX_RATE_MASK                    (0xF0)
+#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI2_SAS_PRATE_MAX_RATE_1_5                     (0x80)
+#define MPI2_SAS_PRATE_MAX_RATE_3_0                     (0x90)
+#define MPI2_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
+#define MPI2_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
+#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI2_SAS_PRATE_MIN_RATE_1_5                     (0x08)
+#define MPI2_SAS_PRATE_MIN_RATE_3_0                     (0x09)
+#define MPI2_SAS_PRATE_MIN_RATE_6_0                     (0x0A)
+#define MPI25_SAS_PRATE_MIN_RATE_12_0                   (0x0B)
+
+
+/*values for SAS HwLinkRate fields */
+#define MPI2_SAS_HWRATE_MAX_RATE_MASK                   (0xF0)
+#define MPI2_SAS_HWRATE_MAX_RATE_1_5                    (0x80)
+#define MPI2_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
+#define MPI2_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
+#define MPI2_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
+#define MPI2_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
+#define MPI2_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
+#define MPI2_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)
+#define MPI25_SAS_HWRATE_MIN_RATE_12_0                  (0x0B)
+
+
+
+/****************************************************************************
+*  SAS IO Unit Config Pages
+****************************************************************************/
+
+/*SAS IO Unit Page 0 */
+
+typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
+	U8          Port;                   /*0x00 */
+	U8          PortFlags;              /*0x01 */
+	U8          PhyFlags;               /*0x02 */
+	U8          NegotiatedLinkRate;     /*0x03 */
+	U32         ControllerPhyDeviceInfo;/*0x04 */
+	U16         AttachedDevHandle;      /*0x08 */
+	U16         ControllerDevHandle;    /*0x0A */
+	U32         DiscoveryStatus;        /*0x0C */
+	U32         Reserved;               /*0x10 */
+} MPI2_SAS_IO_UNIT0_PHY_DATA,
+	*PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
+	Mpi2SasIOUnit0PhyData_t,
+	*pMpi2SasIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
+#define MPI2_SAS_IOUNIT0_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;   /*0x00 */
+	U32                                 Reserved1;/*0x08 */
+	U8                                  NumPhys;  /*0x0C */
+	U8                                  Reserved2;/*0x0D */
+	U16                                 Reserved3;/*0x0E */
+	MPI2_SAS_IO_UNIT0_PHY_DATA
+		PhyData[MPI2_SAS_IOUNIT0_PHY_MAX];    /*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_0,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
+	Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
+
+#define MPI2_SASIOUNITPAGE0_PAGEVERSION                     (0x05)
+
+/*values for SAS IO Unit Page 0 PortFlags */
+#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS     (0x08)
+#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG          (0x01)
+
+/*values for SAS IO Unit Page 0 PhyFlags */
+#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED             (0x10)
+#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED               (0x08)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
+
+/*values for SAS IO Unit Page 0 DiscoveryStatus */
+#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
+#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
+#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED               (0x20000000)
+#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
+#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR             (0x08000000)
+#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
+#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
+#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
+#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
+#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
+#define MPI2_SASIOUNIT0_DS_TABLE_LINK                       (0x00000400)
+#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
+#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
+#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
+#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
+#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
+#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
+#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
+#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
+#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
+
+
+/*SAS IO Unit Page 1 */
+
+typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
+	U8          Port;                       /*0x00 */
+	U8          PortFlags;                  /*0x01 */
+	U8          PhyFlags;                   /*0x02 */
+	U8          MaxMinLinkRate;             /*0x03 */
+	U32         ControllerPhyDeviceInfo;    /*0x04 */
+	U16         MaxTargetPortConnectTime;   /*0x08 */
+	U16         Reserved1;                  /*0x0A */
+} MPI2_SAS_IO_UNIT1_PHY_DATA,
+	*PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
+	Mpi2SasIOUnit1PhyData_t,
+	*pMpi2SasIOUnit1PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
+#define MPI2_SAS_IOUNIT1_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header; /*0x00 */
+	U16
+		ControlFlags;                       /*0x08 */
+	U16
+		SASNarrowMaxQueueDepth;             /*0x0A */
+	U16
+		AdditionalControlFlags;             /*0x0C */
+	U16
+		SASWideMaxQueueDepth;               /*0x0E */
+	U8
+		NumPhys;                            /*0x10 */
+	U8
+		SATAMaxQDepth;                      /*0x11 */
+	U8
+		ReportDeviceMissingDelay;           /*0x12 */
+	U8
+		IODeviceMissingDelay;               /*0x13 */
+	MPI2_SAS_IO_UNIT1_PHY_DATA
+		PhyData[MPI2_SAS_IOUNIT1_PHY_MAX];  /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_1,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
+	Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
+
+#define MPI2_SASIOUNITPAGE1_PAGEVERSION     (0x09)
+
+/*values for SAS IO Unit Page 1 ControlFlags */
+#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST                    (0x8000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX                        (0x4000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX                        (0x2000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE                    (0x1000)
+
+#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT                    (0x0600)
+#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT                   (9)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH                    (0x0)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT                     (0x1)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT                    (0x2)
+
+#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED             (0x0080)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED                 (0x0040)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED                   (0x0020)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED                   (0x0010)
+#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL           (0x0008)
+#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL                 (0x0004)
+#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY                 (0x0002)
+#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION                   (0x0001)
+
+/*values for SAS IO Unit Page 1 AdditionalControlFlags */
+#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
+#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
+#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION        (0x0020)
+#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
+#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
+#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
+#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
+#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
+
+/*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
+#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK                 (0x7F)
+#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16                      (0x80)
+
+/*values for SAS IO Unit Page 1 PortFlags */
+#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)
+
+/*values for SAS IO Unit Page 1 PhyFlags */
+#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE                      (0x10)
+#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)
+
+/*values for SAS IO Unit Page 1 MaxMinLinkRate */
+#define MPI2_SASIOUNIT1_MAX_RATE_MASK                               (0xF0)
+#define MPI2_SASIOUNIT1_MAX_RATE_1_5                                (0x80)
+#define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
+#define MPI2_SASIOUNIT1_MAX_RATE_6_0                                (0xA0)
+#define MPI25_SASIOUNIT1_MAX_RATE_12_0                              (0xB0)
+#define MPI2_SASIOUNIT1_MIN_RATE_MASK                               (0x0F)
+#define MPI2_SASIOUNIT1_MIN_RATE_1_5                                (0x08)
+#define MPI2_SASIOUNIT1_MIN_RATE_3_0                                (0x09)
+#define MPI2_SASIOUNIT1_MIN_RATE_6_0                                (0x0A)
+#define MPI25_SASIOUNIT1_MIN_RATE_12_0                              (0x0B)
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
+
+
+/*SAS IO Unit Page 4 */
+
+typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
+	U8          MaxTargetSpinup;            /*0x00 */
+	U8          SpinupDelay;                /*0x01 */
+	U8          SpinupFlags;                /*0x02 */
+	U8          Reserved1;                  /*0x03 */
+} MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+	*PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+	Mpi2SasIOUnit4SpinupGroup_t,
+	*pMpi2SasIOUnit4SpinupGroup_t;
+/*defines for SAS IO Unit Page 4 SpinupFlags */
+#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG         (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
+#define MPI2_SAS_IOUNIT4_PHY_MAX        (4)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;/*0x00 */
+	MPI2_SAS_IOUNIT4_SPINUP_GROUP
+		SpinupGroupParameters[4];       /*0x08 */
+	U32
+		Reserved1;                      /*0x18 */
+	U32
+		Reserved2;                      /*0x1C */
+	U32
+		Reserved3;                      /*0x20 */
+	U8
+		BootDeviceWaitTime;             /*0x24 */
+	U8
+		Reserved4;                      /*0x25 */
+	U16
+		Reserved5;                      /*0x26 */
+	U8
+		NumPhys;                        /*0x28 */
+	U8
+		PEInitialSpinupDelay;           /*0x29 */
+	U8
+		PEReplyDelay;                   /*0x2A */
+	U8
+		Flags;                          /*0x2B */
+	U8
+		PHY[MPI2_SAS_IOUNIT4_PHY_MAX];  /*0x2C */
+} MPI2_CONFIG_PAGE_SASIOUNIT_4,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
+	Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
+
+#define MPI2_SASIOUNITPAGE4_PAGEVERSION     (0x02)
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE               (0x01)
+
+/*defines for PHY field */
+#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK               (0x03)
+
+
+/*SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+	U8          ControlFlags;               /*0x00 */
+	U8          PortWidthModGroup;          /*0x01 */
+	U16         InactivityTimerExponent;    /*0x02 */
+	U8          SATAPartialTimeout;         /*0x04 */
+	U8          Reserved2;                  /*0x05 */
+	U8          SATASlumberTimeout;         /*0x06 */
+	U8          Reserved3;                  /*0x07 */
+	U8          SASPartialTimeout;          /*0x08 */
+	U8          Reserved4;                  /*0x09 */
+	U8          SASSlumberTimeout;          /*0x0A */
+	U8          Reserved5;                  /*0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+	*PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+	Mpi2SasIOUnit5PhyPmSettings_t,
+	*pMpi2SasIOUnit5PhyPmSettings_t;
+
+/*defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
+
+/*defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE                    (0xFF)
+
+/*defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL            (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL           (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER           (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER          (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL           (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL          (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS                 (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND                  (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS        (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS            (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND             (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS        (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS            (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND             (0)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;   /*0x00 */
+	U8                                  NumPhys;  /*0x08 */
+	U8                                  Reserved1;/*0x09 */
+	U16                                 Reserved2;/*0x0A */
+	U32                                 Reserved3;/*0x0C */
+	MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
+	SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+	Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x01)
+
+
+/*SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+	U8          CurrentStatus;              /*0x00 */
+	U8          CurrentModulation;          /*0x01 */
+	U8          CurrentUtilization;         /*0x02 */
+	U8          Reserved1;                  /*0x03 */
+	U32         Reserved2;                  /*0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+	*PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+	Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+	*pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/*defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE                      (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED                     (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG                   (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN                        (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY                 (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE                         (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT                    (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST                      (0x07)
+
+/*defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT                   (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT                   (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT                   (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT                  (0x03)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /*0x00 */
+	U32                                 Reserved1;              /*0x08 */
+	U32                                 Reserved2;              /*0x0C */
+	U8                                  NumGroups;              /*0x10 */
+	U8                                  Reserved3;              /*0x11 */
+	U16                                 Reserved4;              /*0x12 */
+	MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+	PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+	Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION     (0x00)
+
+
+/*SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+	U8          Flags;                      /*0x00 */
+	U8          Reserved1;                  /*0x01 */
+	U16         Reserved2;                  /*0x02 */
+	U8          Threshold75Pct;             /*0x04 */
+	U8          Threshold50Pct;             /*0x05 */
+	U8          Threshold25Pct;             /*0x06 */
+	U8          Reserved3;                  /*0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+	*PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+	Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+	*pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION  (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;             /*0x00 */
+	U8                               SamplingInterval;   /*0x08 */
+	U8                               WindowLength;       /*0x09 */
+	U16                              Reserved1;          /*0x0A */
+	U32                              Reserved2;          /*0x0C */
+	U32                              Reserved3;          /*0x10 */
+	U8                               NumGroups;          /*0x14 */
+	U8                               Reserved4;          /*0x15 */
+	U16                              Reserved5;          /*0x16 */
+	MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+	PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+	Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION     (0x00)
+
+
+/*SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                         /*0x00 */
+	U32
+		Reserved1;                      /*0x08 */
+	U32
+		PowerManagementCapabilities;    /*0x0C */
+	U8
+		TxRxSleepStatus;                /*0x10 */
+	U8
+		Reserved2;                      /*0x11 */
+	U16
+		Reserved3;                      /*0x12 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+	Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
+
+/*defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
+
+/*defines for TxRxSleepStatus field */
+#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED          (0x00)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED           (0x01)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE               (0x02)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN             (0x03)
+
+
+
+/*SAS IO Unit Page 16 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                             /*0x00 */
+	U64
+		TimeStamp;                          /*0x08 */
+	U32
+		Reserved1;                          /*0x10 */
+	U32
+		Reserved2;                          /*0x14 */
+	U32
+		FastPathPendedRequests;             /*0x18 */
+	U32
+		FastPathUnPendedRequests;           /*0x1C */
+	U32
+		FastPathHostRequestStarts;          /*0x20 */
+	U32
+		FastPathFirmwareRequestStarts;      /*0x24 */
+	U32
+		FastPathHostCompletions;            /*0x28 */
+	U32
+		FastPathFirmwareCompletions;        /*0x2C */
+	U32
+		NonFastPathRequestStarts;           /*0x30 */
+	U32
+		NonFastPathHostCompletions;         /*0x30 */
+} MPI2_CONFIG_PAGE_SASIOUNIT16,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
+	Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
+
+#define MPI2_SASIOUNITPAGE16_PAGEVERSION    (0x00)
+
+
+/****************************************************************************
+*  SAS Expander Config Pages
+****************************************************************************/
+
+/*SAS Expander Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PhysicalPort;               /*0x08 */
+	U8
+		ReportGenLength;            /*0x09 */
+	U16
+		EnclosureHandle;            /*0x0A */
+	U64
+		SASAddress;                 /*0x0C */
+	U32
+		DiscoveryStatus;            /*0x14 */
+	U16
+		DevHandle;                  /*0x18 */
+	U16
+		ParentDevHandle;            /*0x1A */
+	U16
+		ExpanderChangeCount;        /*0x1C */
+	U16
+		ExpanderRouteIndexes;       /*0x1E */
+	U8
+		NumPhys;                    /*0x20 */
+	U8
+		SASLevel;                   /*0x21 */
+	U16
+		Flags;                      /*0x22 */
+	U16
+		STPBusInactivityTimeLimit;  /*0x24 */
+	U16
+		STPMaxConnectTimeLimit;     /*0x26 */
+	U16
+		STP_SMP_NexusLossTime;      /*0x28 */
+	U16
+		MaxNumRoutedSasAddresses;   /*0x2A */
+	U64
+		ActiveZoneManagerSASAddress;/*0x2C */
+	U16
+		ZoneLockInactivityLimit;    /*0x34 */
+	U16
+		Reserved1;                  /*0x36 */
+	U8
+		TimeToReducedFunc;          /*0x38 */
+	U8
+		InitialTimeToReducedFunc;   /*0x39 */
+	U8
+		MaxReducedFuncTime;         /*0x3A */
+	U8
+		Reserved2;                  /*0x3B */
+} MPI2_CONFIG_PAGE_EXPANDER_0,
+	*PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
+	Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
+
+#define MPI2_SASEXPANDER0_PAGEVERSION       (0x06)
+
+/*values for SAS Expander Page 0 DiscoveryStatus field */
+#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED         (0x80000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED          (0x40000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED            (0x20000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED          (0x10000000)
+#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR          (0x08000000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE         (0x00004000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN             (0x00002000)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK     (0x00001000)
+#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE            (0x00000800)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK                    (0x00000400)
+#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK              (0x00000200)
+#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR                 (0x00000100)
+#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED           (0x00000080)
+#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST               (0x00000040)
+#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES             (0x00000020)
+#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT                   (0x00000010)
+#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS                (0x00000004)
+#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE          (0x00000002)
+#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED                 (0x00000001)
+
+/*values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY      (0x2000)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED                (0x1000)
+#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES    (0x0800)
+#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES     (0x0400)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT             (0x0200)
+#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING             (0x0100)
+#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT     (0x0080)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE       (0x0010)
+#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG              (0x0004)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS         (0x0002)
+#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG         (0x0001)
+
+
+/*SAS Expander Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PhysicalPort;               /*0x08 */
+	U8
+		Reserved1;                  /*0x09 */
+	U16
+		Reserved2;                  /*0x0A */
+	U8
+		NumPhys;                    /*0x0C */
+	U8
+		Phy;                        /*0x0D */
+	U16
+		NumTableEntriesProgrammed;  /*0x0E */
+	U8
+		ProgrammedLinkRate;         /*0x10 */
+	U8
+		HwLinkRate;                 /*0x11 */
+	U16
+		AttachedDevHandle;          /*0x12 */
+	U32
+		PhyInfo;                    /*0x14 */
+	U32
+		AttachedDeviceInfo;         /*0x18 */
+	U16
+		ExpanderDevHandle;          /*0x1C */
+	U8
+		ChangeCount;                /*0x1E */
+	U8
+		NegotiatedLinkRate;         /*0x1F */
+	U8
+		PhyIdentifier;              /*0x20 */
+	U8
+		AttachedPhyIdentifier;      /*0x21 */
+	U8
+		Reserved3;                  /*0x22 */
+	U8
+		DiscoveryInfo;              /*0x23 */
+	U32
+		AttachedPhyInfo;            /*0x24 */
+	U8
+		ZoneGroup;                  /*0x28 */
+	U8
+		SelfConfigStatus;           /*0x29 */
+	U16
+		Reserved4;                  /*0x2A */
+} MPI2_CONFIG_PAGE_EXPANDER_1,
+	*PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
+	Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
+
+#define MPI2_SASEXPANDER1_PAGEVERSION       (0x02)
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
+ *used for the AttachedDeviceInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*values for SAS Expander Page 1 DiscoveryInfo field */
+#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED    (0x04)
+#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE  (0x02)
+#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES  (0x01)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+
+/****************************************************************************
+*  SAS Device Config Pages
+****************************************************************************/
+
+/*SAS Device Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U16
+		Slot;                   /*0x08 */
+	U16
+		EnclosureHandle;        /*0x0A */
+	U64
+		SASAddress;             /*0x0C */
+	U16
+		ParentDevHandle;        /*0x14 */
+	U8
+		PhyNum;                 /*0x16 */
+	U8
+		AccessStatus;           /*0x17 */
+	U16
+		DevHandle;              /*0x18 */
+	U8
+		AttachedPhyIdentifier;  /*0x1A */
+	U8
+		ZoneGroup;              /*0x1B */
+	U32
+		DeviceInfo;             /*0x1C */
+	U16
+		Flags;                  /*0x20 */
+	U8
+		PhysicalPort;           /*0x22 */
+	U8
+		MaxPortConnections;     /*0x23 */
+	U64
+		DeviceName;             /*0x24 */
+	U8
+		PortGroups;             /*0x2C */
+	U8
+		DmaGroup;               /*0x2D */
+	U8
+		ControlGroup;           /*0x2E */
+	U8
+		Reserved1;              /*0x2F */
+	U32
+		Reserved2;              /*0x30 */
+	U32
+		Reserved3;              /*0x34 */
+} MPI2_CONFIG_PAGE_SAS_DEV_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
+	Mpi2SasDevicePage0_t,
+	*pMpi2SasDevicePage0_t;
+
+#define MPI2_SASDEVICE0_PAGEVERSION         (0x08)
+
+/*values for SAS Device Page 0 AccessStatus field */
+#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED           (0x01)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED     (0x02)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT  (0x03)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION  (0x04)
+#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE      (0x05)
+#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE  (0x06)
+#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED             (0x07)
+/*specific values for SATA Init failures */
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                (0x10)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT   (0x11)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG                   (0x12)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION         (0x13)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER            (0x14)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                 (0x15)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                (0x16)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                (0x17)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION       (0x18)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE        (0x19)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX                    (0x1F)
+
+/*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
+
+/*values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
+#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH           (0x4000)
+#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE           (0x2000)
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE             (0x0200)
+#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE           (0x0100)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED     (0x0080)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED         (0x0040)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
+#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
+
+
+/*SAS Device Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		Reserved1;              /*0x08 */
+	U64
+		SASAddress;             /*0x0C */
+	U32
+		Reserved2;              /*0x14 */
+	U16
+		DevHandle;              /*0x18 */
+	U16
+		Reserved3;              /*0x1A */
+	U8
+		InitialRegDeviceFIS[20];/*0x1C */
+} MPI2_CONFIG_PAGE_SAS_DEV_1,
+	*PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
+	Mpi2SasDevicePage1_t,
+	*pMpi2SasDevicePage1_t;
+
+#define MPI2_SASDEVICE1_PAGEVERSION         (0x01)
+
+
+/****************************************************************************
+*  SAS PHY Config Pages
+****************************************************************************/
+
+/*SAS PHY Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U16
+		OwnerDevHandle;         /*0x08 */
+	U16
+		Reserved1;              /*0x0A */
+	U16
+		AttachedDevHandle;      /*0x0C */
+	U8
+		AttachedPhyIdentifier;  /*0x0E */
+	U8
+		Reserved2;              /*0x0F */
+	U32
+		AttachedPhyInfo;        /*0x10 */
+	U8
+		ProgrammedLinkRate;     /*0x14 */
+	U8
+		HwLinkRate;             /*0x15 */
+	U8
+		ChangeCount;            /*0x16 */
+	U8
+		Flags;                  /*0x17 */
+	U32
+		PhyInfo;                /*0x18 */
+	U8
+		NegotiatedLinkRate;     /*0x1C */
+	U8
+		Reserved3;              /*0x1D */
+	U16
+		Reserved4;              /*0x1E */
+} MPI2_CONFIG_PAGE_SAS_PHY_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
+	Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
+
+#define MPI2_SASPHY0_PAGEVERSION            (0x03)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*values for SAS PHY Page 0 Flags field */
+#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC             (0x01)
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*SAS PHY Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U32
+		InvalidDwordCount;          /*0x0C */
+	U32
+		RunningDisparityErrorCount; /*0x10 */
+	U32
+		LossDwordSynchCount;        /*0x14 */
+	U32
+		PhyResetProblemCount;       /*0x18 */
+} MPI2_CONFIG_PAGE_SAS_PHY_1,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
+	Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
+
+#define MPI2_SASPHY1_PAGEVERSION            (0x01)
+
+
+/*SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+	U8          PhyEventCode;       /*0x00 */
+	U8          Reserved1;          /*0x01 */
+	U16         Reserved2;          /*0x02 */
+	U32         PhyEventInfo;       /*0x04 */
+} MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
+	Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U8
+		NumPhyEvents;               /*0x0C */
+	U8
+		Reserved2;                  /*0x0D */
+	U16
+		Reserved3;                  /*0x0E */
+	MPI2_SASPHY2_PHY_EVENT
+		PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+	Mpi2SasPhyPage2_t,
+	*pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION            (0x00)
+
+
+/*SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+	U8          PhyEventCode;       /*0x00 */
+	U8          Reserved1;          /*0x01 */
+	U16         Reserved2;          /*0x02 */
+	U8          CounterType;        /*0x04 */
+	U8          ThresholdWindow;    /*0x05 */
+	U8          TimeUnits;          /*0x06 */
+	U8          Reserved3;          /*0x07 */
+	U32         EventThreshold;     /*0x08 */
+	U16         ThresholdFlags;     /*0x0C */
+	U16         Reserved4;          /*0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG,
+	*PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+	Mpi2SasPhy3PhyEventConfig_t,
+	*pMpi2SasPhy3PhyEventConfig_t;
+
+/*values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)
+
+/*values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)
+
+/*values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U8
+		NumPhyEvents;               /*0x0C */
+	U8
+		Reserved2;                  /*0x0D */
+	U16
+		Reserved3;                  /*0x0E */
+	MPI2_SASPHY3_PHY_EVENT_CONFIG
+		PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+	Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION            (0x00)
+
+
+/*SAS PHY Page 4 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U16
+		Reserved1;                  /*0x08 */
+	U8
+		Reserved2;                  /*0x0A */
+	U8
+		Flags;                      /*0x0B */
+	U8
+		InitialFrame[28];           /*0x0C */
+} MPI2_CONFIG_PAGE_SAS_PHY_4,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
+	Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
+
+#define MPI2_SASPHY4_PAGEVERSION            (0x00)
+
+/*values for the Flags field */
+#define MPI2_SASPHY4_FLAGS_FRAME_VALID        (0x02)
+#define MPI2_SASPHY4_FLAGS_SATA_FRAME         (0x01)
+
+
+
+
+/****************************************************************************
+*  SAS Port Config Pages
+****************************************************************************/
+
+/*SAS Port Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PortNumber;                 /*0x08 */
+	U8
+		PhysicalPort;               /*0x09 */
+	U8
+		PortWidth;                  /*0x0A */
+	U8
+		PhysicalPortWidth;          /*0x0B */
+	U8
+		ZoneGroup;                  /*0x0C */
+	U8
+		Reserved1;                  /*0x0D */
+	U16
+		Reserved2;                  /*0x0E */
+	U64
+		SASAddress;                 /*0x10 */
+	U32
+		DeviceInfo;                 /*0x18 */
+	U32
+		Reserved3;                  /*0x1C */
+	U32
+		Reserved4;                  /*0x20 */
+} MPI2_CONFIG_PAGE_SAS_PORT_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
+	Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
+
+#define MPI2_SASPORT0_PAGEVERSION           (0x00)
+
+/*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
+
+
+/****************************************************************************
+*  SAS Enclosure Config Pages
+****************************************************************************/
+
+/*SAS Enclosure Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U64
+		EnclosureLogicalID;         /*0x0C */
+	U16
+		Flags;                      /*0x14 */
+	U16
+		EnclosureHandle;            /*0x16 */
+	U16
+		NumSlots;                   /*0x18 */
+	U16
+		StartSlot;                  /*0x1A */
+	U16
+		Reserved2;                  /*0x1C */
+	U16
+		SEPDevHandle;               /*0x1E */
+	U32
+		Reserved3;                  /*0x20 */
+	U32
+		Reserved4;                  /*0x24 */
+} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
+
+#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x03)
+
+/*values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO         (0x0002)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO         (0x0003)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE     (0x0004)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO          (0x0005)
+
+
+/****************************************************************************
+*  Log Config Page
+****************************************************************************/
+
+/*Log Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLogEntries at runtime.
+ */
+#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
+#define MPI2_LOG_0_NUM_LOG_ENTRIES          (1)
+#endif
+
+#define MPI2_LOG_0_LOG_DATA_LENGTH          (0x1C)
+
+typedef struct _MPI2_LOG_0_ENTRY {
+	U64         TimeStamp;                      /*0x00 */
+	U32         Reserved1;                      /*0x08 */
+	U16         LogSequence;                    /*0x0C */
+	U16         LogEntryQualifier;              /*0x0E */
+	U8          VP_ID;                          /*0x10 */
+	U8          VF_ID;                          /*0x11 */
+	U16         Reserved2;                      /*0x12 */
+	U8
+		LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
+} MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
+	Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
+
+/*values for Log Page 0 LogEntry LogEntryQualifier field */
+#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED          (0x0000)
+#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET        (0x0001)
+#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE      (0x0002)
+#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC    (0x8000)
+#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC    (0xFFFF)
+
+typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;       /*0x00 */
+	U32                                 Reserved1;    /*0x08 */
+	U32                                 Reserved2;    /*0x0C */
+	U16                                 NumLogEntries;/*0x10 */
+	U16                                 Reserved3;    /*0x12 */
+	MPI2_LOG_0_ENTRY
+		LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
+} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
+	Mpi2LogPage0_t, *pMpi2LogPage0_t;
+
+#define MPI2_LOG_0_PAGEVERSION              (0x02)
+
+
+/****************************************************************************
+*  RAID Config Page
+****************************************************************************/
+
+/*RAID Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumElements at runtime.
+ */
+#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
+#define MPI2_RAIDCONFIG0_MAX_ELEMENTS       (1)
+#endif
+
+typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
+	U16                     ElementFlags;             /*0x00 */
+	U16                     VolDevHandle;             /*0x02 */
+	U8                      HotSparePool;             /*0x04 */
+	U8                      PhysDiskNum;              /*0x05 */
+	U16                     PhysDiskDevHandle;        /*0x06 */
+} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+	*PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+	Mpi2RaidConfig0ConfigElement_t,
+	*pMpi2RaidConfig0ConfigElement_t;
+
+/*values for the ElementFlags field */
+#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE       (0x000F)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT          (0x0000)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT   (0x0001)
+#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT       (0x0002)
+#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT             (0x0003)
+
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;         /*0x00 */
+	U8                                  NumHotSpares;   /*0x08 */
+	U8                                  NumPhysDisks;   /*0x09 */
+	U8                                  NumVolumes;     /*0x0A */
+	U8                                  ConfigNum;      /*0x0B */
+	U32                                 Flags;          /*0x0C */
+	U8                                  ConfigGUID[24]; /*0x10 */
+	U32                                 Reserved1;      /*0x28 */
+	U8                                  NumElements;    /*0x2C */
+	U8                                  Reserved2;      /*0x2D */
+	U16                                 Reserved3;      /*0x2E */
+	MPI2_RAIDCONFIG0_CONFIG_ELEMENT
+		ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
+} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+	*PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+	Mpi2RaidConfigurationPage0_t,
+	*pMpi2RaidConfigurationPage0_t;
+
+#define MPI2_RAIDCONFIG0_PAGEVERSION            (0x00)
+
+/*values for RAID Configuration Page 0 Flags field */
+#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG        (0x00000001)
+
+
+/****************************************************************************
+*  Driver Persistent Mapping Config Pages
+****************************************************************************/
+
+/*Driver Persistent Mapping Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
+	U64	PhysicalIdentifier;         /*0x00 */
+	U16	MappingInformation;         /*0x08 */
+	U16	DeviceIndex;                /*0x0A */
+	U32	PhysicalBitsMapping;        /*0x0C */
+	U32	Reserved1;                  /*0x10 */
+} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+	*PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+	Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header; /*0x00 */
+	MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY  Entry;  /*0x08 */
+} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+	*PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+	Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
+
+#define MPI2_DRIVERMAPPING0_PAGEVERSION         (0x00)
+
+/*values for Driver Persistent Mapping Page 0 MappingInformation field */
+#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK              (0x07F0)
+#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT             (4)
+#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK           (0x000F)
+
+
+/****************************************************************************
+*  Ethernet Config Pages
+****************************************************************************/
+
+/*Ethernet Page 0 */
+
+/*IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+	U32     IPv4Addr;
+	U32     IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
+	Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH          (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;          /*0x00 */
+	U8                                  NumInterfaces;   /*0x08 */
+	U8                                  Reserved0;       /*0x09 */
+	U16                                 Reserved1;       /*0x0A */
+	U32                                 Status;          /*0x0C */
+	U8                                  MediaState;      /*0x10 */
+	U8                                  Reserved2;       /*0x11 */
+	U16                                 Reserved3;       /*0x12 */
+	U8                                  MacAddress[6];   /*0x14 */
+	U8                                  Reserved4;       /*0x1A */
+	U8                                  Reserved5;       /*0x1B */
+	MPI2_ETHERNET_IP_ADDR               IpAddress;       /*0x1C */
+	MPI2_ETHERNET_IP_ADDR               SubnetMask;      /*0x2C */
+	MPI2_ETHERNET_IP_ADDR               GatewayIpAddress;/*0x3C */
+	MPI2_ETHERNET_IP_ADDR               DNS1IpAddress;   /*0x4C */
+	MPI2_ETHERNET_IP_ADDR               DNS2IpAddress;   /*0x5C */
+	MPI2_ETHERNET_IP_ADDR               DhcpIpAddress;   /*0x6C */
+	U8
+		HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0,
+	*PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+	Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION   (0x00)
+
+/*values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE             (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE             (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED        (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF               (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED         (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED           (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED             (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED      (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED             (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED             (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES           (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED           (0x00000001)
+
+/*values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK           (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED                (0x00)
+#define MPI2_ETHPG0_MS_10MBIT                       (0x01)
+#define MPI2_ETHPG0_MS_100MBIT                      (0x02)
+#define MPI2_ETHPG0_MS_1GBIT                        (0x03)
+
+
+/*Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		Reserved0;              /*0x08 */
+	U32
+		Flags;                  /*0x0C */
+	U8
+		MediaState;             /*0x10 */
+	U8
+		Reserved1;              /*0x11 */
+	U16
+		Reserved2;              /*0x12 */
+	U8
+		MacAddress[6];          /*0x14 */
+	U8
+		Reserved3;              /*0x1A */
+	U8
+		Reserved4;              /*0x1B */
+	MPI2_ETHERNET_IP_ADDR
+		StaticIpAddress;        /*0x1C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticSubnetMask;       /*0x2C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticGatewayIpAddress; /*0x3C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticDNS1IpAddress;    /*0x4C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticDNS2IpAddress;    /*0x5C */
+	U32
+		Reserved5;              /*0x6C */
+	U32
+		Reserved6;              /*0x70 */
+	U32
+		Reserved7;              /*0x74 */
+	U32
+		Reserved8;              /*0x78 */
+	U8
+		HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1,
+	*PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+	Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION   (0x00)
+
+/*values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF             (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD         (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET              (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2                (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT         (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6                (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4                (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES         (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF              (0x00000001)
+
+/*values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK               (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO               (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT             (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT            (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT              (0x03)
+
+
+/****************************************************************************
+*  Extended Manufacturing Config Pages
+****************************************************************************/
+
+/*
+ *Generic structure to use for product-specific extended manufacturing pages
+ *(currently Extended Manufacturing Page 40 through Extended Manufacturing
+ *Page 60).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		ProductSpecificInfo;    /*0x08 */
+} MPI2_CONFIG_PAGE_EXT_MAN_PS,
+	*PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
+	Mpi2ExtManufacturingPagePS_t,
+	*pMpi2ExtManufacturingPagePS_t;
+
+/*PageVersion should be provided by product-specific code */
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
new file mode 100644
index 0000000..a079e52
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -0,0 +1,560 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_init.h
+ *         Title:  MPI SCSI initiator mode messages and structures
+ * Creation Date:  June 23, 2006
+ *
+ * mpi2_init.h Version:  02.00.14
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
+ * 12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
+ * 02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
+ * 03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
+ * 05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
+ * 10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
+ *                     Control field Task Attribute flags.
+ *                     Moved LUN field defines to mpi2.h becasue they are
+ *                     common to many structures.
+ * 05-06-09  02.00.07  Changed task management type of Query Unit Attention to
+ *                     Query Asynchronous Event.
+ *                     Defined two new bits in the SlotStatus field of the SCSI
+ *                     Enclosure Processor Request and Reply.
+ * 10-28-09  02.00.08  Added defines for decoding the ResponseInfo bytes for
+ *                     both SCSI IO Error Reply and SCSI Task Management Reply.
+ *                     Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
+ *                     Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
+ * 02-10-10  02.00.09  Removed unused structure that had "#if 0" around it.
+ * 05-12-10  02.00.10  Added optional vendor-unique region to SCSI IO Request.
+ * 11-10-10  02.00.11  Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
+ * 11-18-11  02.00.12  Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.13  Added alternate defines for Task Priority / Command
+ *                     Priority to match SAM-4.
+ *                     Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
+ * 07-10-12  02.00.14  Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_INIT_H
+#define MPI2_INIT_H
+
+/*****************************************************************************
+*
+*              SCSI Initiator Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SCSI IO messages and associated structures
+****************************************************************************/
+
+typedef struct _MPI2_SCSI_IO_CDB_EEDP32 {
+	U8 CDB[20];		/*0x00 */
+	U32 PrimaryReferenceTag;	/*0x14 */
+	U16 PrimaryApplicationTag;	/*0x18 */
+	U16 PrimaryApplicationTagMask;	/*0x1A */
+	U32 TransferLength;	/*0x1C */
+} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32,
+	Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t;
+
+/*MPI v2.0 CDB field */
+typedef union _MPI2_SCSI_IO_CDB_UNION {
+	U8 CDB32[32];
+	MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+	MPI2_SGE_SIMPLE_UNION SGE;
+} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION,
+	Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t;
+
+/*MPI v2.0 SCSI IO Request Message */
+typedef struct _MPI2_SCSI_IO_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U32 SenseBufferLowAddress;	/*0x0C */
+	U16 SGLFlags;		/*0x10 */
+	U8 SenseBufferLength;	/*0x12 */
+	U8 Reserved4;		/*0x13 */
+	U8 SGLOffset0;		/*0x14 */
+	U8 SGLOffset1;		/*0x15 */
+	U8 SGLOffset2;		/*0x16 */
+	U8 SGLOffset3;		/*0x17 */
+	U32 SkipCount;		/*0x18 */
+	U32 DataLength;		/*0x1C */
+	U32 BidirectionalDataLength;	/*0x20 */
+	U16 IoFlags;		/*0x24 */
+	U16 EEDPFlags;		/*0x26 */
+	U32 EEDPBlockSize;	/*0x28 */
+	U32 SecondaryReferenceTag;	/*0x2C */
+	U16 SecondaryApplicationTag;	/*0x30 */
+	U16 ApplicationTagTranslationMask;	/*0x32 */
+	U8 LUN[8];		/*0x34 */
+	U32 Control;		/*0x3C */
+	MPI2_SCSI_IO_CDB_UNION CDB;	/*0x40 */
+
+#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+	MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+	MPI2_SGE_IO_UNION SGL;	/*0x60 */
+
+} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST,
+	Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t;
+
+/*SCSI IO MsgFlags bits */
+
+/*MsgFlags for SenseBufferAddressSpace */
+#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR        (0x0C)
+#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR      (0x00)
+#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR      (0x04)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR      (0x08)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR   (0x0C)
+
+/*SCSI IO SGLFlags bits */
+
+/*base values for Data Location Address Space */
+#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK              (0x0C)
+#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR            (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR            (0x04)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR            (0x08)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR         (0x0C)
+
+/*base values for Type */
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK              (0x03)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI               (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32            (0x01)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64            (0x02)
+
+/*shift values for each sub-field */
+#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT             (12)
+#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT             (8)
+#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT             (4)
+#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT             (0)
+
+/*number of SGLOffset fields */
+#define MPI2_SCSIIO_NUM_SGLOFFSETS                  (4)
+
+/*SCSI IO IoFlags bits */
+
+/*Large CDB Address Space */
+#define MPI2_SCSIIO_CDB_ADDR_MASK                   (0x6000)
+#define MPI2_SCSIIO_CDB_ADDR_SYSTEM                 (0x0000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCDDR                 (0x2000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLB                 (0x4000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA              (0x6000)
+
+#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB               (0x1000)
+#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL           (0x0800)
+#define MPI2_SCSIIO_IOFLAGS_MULTICAST               (0x0400)
+#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
+#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK          (0x01FF)
+
+/*SCSI IO EEDPFlags bits */
+
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG        (0x8000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG        (0x4000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG        (0x2000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG        (0x1000)
+
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG          (0x0400)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG          (0x0200)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD           (0x0100)
+
+#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG       (0x0008)
+
+#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP               (0x0007)
+#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP               (0x0000)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP              (0x0001)
+#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP              (0x0002)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP       (0x0003)
+#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP             (0x0004)
+#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP            (0x0006)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP        (0x0007)
+
+/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
+
+/*SCSI IO Control bits */
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK      (0xFC000000)
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT     (26)
+
+#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK  (0x03000000)
+#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
+#define MPI2_SCSIIO_CONTROL_NODATATRANSFER      (0x00000000)
+#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
+#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
+#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL       (0x03000000)
+
+#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK        (0x00007800)
+#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT       (11)
+/*alternate name for the previous field; called Command Priority in SAM-4 */
+#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK         (0x00007800)
+#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT        (11)
+
+#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK  (0x00000700)
+#define MPI2_SCSIIO_CONTROL_SIMPLEQ             (0x00000000)
+#define MPI2_SCSIIO_CONTROL_HEADOFQ             (0x00000100)
+#define MPI2_SCSIIO_CONTROL_ORDEREDQ            (0x00000200)
+#define MPI2_SCSIIO_CONTROL_ACAQ                (0x00000400)
+
+#define MPI2_SCSIIO_CONTROL_TLR_MASK            (0x000000C0)
+#define MPI2_SCSIIO_CONTROL_NO_TLR              (0x00000000)
+#define MPI2_SCSIIO_CONTROL_TLR_ON              (0x00000040)
+#define MPI2_SCSIIO_CONTROL_TLR_OFF             (0x00000080)
+
+/*MPI v2.5 CDB field */
+typedef union _MPI25_SCSI_IO_CDB_UNION {
+	U8 CDB32[32];
+	MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+	MPI2_IEEE_SGE_SIMPLE64 SGE;
+} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
+	Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
+
+/*MPI v2.5 SCSI IO Request Message */
+typedef struct _MPI25_SCSI_IO_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U32 SenseBufferLowAddress;	/*0x0C */
+	U8 DMAFlags;		/*0x10 */
+	U8 Reserved5;		/*0x11 */
+	U8 SenseBufferLength;	/*0x12 */
+	U8 Reserved4;		/*0x13 */
+	U8 SGLOffset0;		/*0x14 */
+	U8 SGLOffset1;		/*0x15 */
+	U8 SGLOffset2;		/*0x16 */
+	U8 SGLOffset3;		/*0x17 */
+	U32 SkipCount;		/*0x18 */
+	U32 DataLength;		/*0x1C */
+	U32 BidirectionalDataLength;	/*0x20 */
+	U16 IoFlags;		/*0x24 */
+	U16 EEDPFlags;		/*0x26 */
+	U16 EEDPBlockSize;	/*0x28 */
+	U16 Reserved6;		/*0x2A */
+	U32 SecondaryReferenceTag;	/*0x2C */
+	U16 SecondaryApplicationTag;	/*0x30 */
+	U16 ApplicationTagTranslationMask;	/*0x32 */
+	U8 LUN[8];		/*0x34 */
+	U32 Control;		/*0x3C */
+	MPI25_SCSI_IO_CDB_UNION CDB;	/*0x40 */
+
+#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+	MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+	MPI25_SGE_IO_UNION SGL;	/*0x60 */
+
+} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST,
+	Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t;
+
+/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */
+
+/*Defines for the DMAFlags field
+ * Each setting affects 4 SGLS, from SGL0 to SGL3.
+ *     D = Data
+ *     C = Cache DIF
+ *     I = Interleaved
+ *     H = Host DIF
+ */
+#define MPI25_SCSIIO_DMAFLAGS_OP_MASK               (0x0F)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D            (0x00)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C            (0x01)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I            (0x02)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C            (0x03)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I            (0x04)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I            (0x05)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C            (0x06)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I            (0x07)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I            (0x08)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I            (0x09)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D            (0x0A)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C            (0x0B)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I            (0x0C)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C            (0x0D)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I            (0x0E)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I            (0x0F)
+
+/*number of SGLOffset fields */
+#define MPI25_SCSIIO_NUM_SGLOFFSETS                 (4)
+
+/*defines for the IoFlags field */
+#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK           (0xC000)
+#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH            (0x0000)
+#define MPI25_SCSIIO_IOFLAGS_FAST_PATH              (0x4000)
+
+#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB                  (0x1000)
+#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL              (0x0800)
+#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK             (0x01FF)
+
+/*MPI v2.5 defines for the EEDPFlags bits */
+/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */
+#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK             (0x00C0)
+#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE              (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE          (0x0040)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE          (0x0080)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE   (0x00C0)
+
+#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK       (0x0030)
+#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD           (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD         (0x0010)
+
+/*use MPI2_LUN_ defines from mpi2.h for the LUN field */
+
+/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */
+
+/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so
+ *      MPI2_SCSI_IO_REPLY is used for both.
+ */
+
+/*SCSI IO Error Reply Message */
+typedef struct _MPI2_SCSI_IO_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 SCSIStatus;		/*0x0C */
+	U8 SCSIState;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TransferCount;	/*0x14 */
+	U32 SenseCount;		/*0x18 */
+	U32 ResponseInfo;	/*0x1C */
+	U16 TaskTag;		/*0x20 */
+	U16 Reserved4;		/*0x22 */
+	U32 BidirectionalTransferCount;	/*0x24 */
+	U32 EEDPErrorOffset;	/*0x28 *//*MPI 2.5 only; Reserved in MPI 2.0*/
+	U32 Reserved6;		/*0x2C */
+} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
+	Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
+
+/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
+
+#define MPI2_SCSI_STATUS_GOOD                   (0x00)
+#define MPI2_SCSI_STATUS_CHECK_CONDITION        (0x02)
+#define MPI2_SCSI_STATUS_CONDITION_MET          (0x04)
+#define MPI2_SCSI_STATUS_BUSY                   (0x08)
+#define MPI2_SCSI_STATUS_INTERMEDIATE           (0x10)
+#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET   (0x14)
+#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT   (0x18)
+#define MPI2_SCSI_STATUS_COMMAND_TERMINATED     (0x22)	/*obsolete */
+#define MPI2_SCSI_STATUS_TASK_SET_FULL          (0x28)
+#define MPI2_SCSI_STATUS_ACA_ACTIVE             (0x30)
+#define MPI2_SCSI_STATUS_TASK_ABORTED           (0x40)
+
+/*SCSI IO Reply SCSIState flags */
+
+#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID     (0x10)
+#define MPI2_SCSI_STATE_TERMINATED              (0x08)
+#define MPI2_SCSI_STATE_NO_SCSI_STATUS          (0x04)
+#define MPI2_SCSI_STATE_AUTOSENSE_FAILED        (0x02)
+#define MPI2_SCSI_STATE_AUTOSENSE_VALID         (0x01)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSI_RI_MASK_REASONCODE            (0x000000FF)
+#define MPI2_SCSI_RI_SHIFT_REASONCODE           (0)
+
+#define MPI2_SCSI_TASKTAG_UNKNOWN               (0xFFFF)
+
+/****************************************************************************
+* SCSI Task Management messages
+****************************************************************************/
+
+/*SCSI Task Management Request Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved1;		/*0x04 */
+	U8 TaskType;		/*0x05 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 LUN[8];		/*0x0C */
+	U32 Reserved4[7];	/*0x14 */
+	U16 TaskMID;		/*0x30 */
+	U16 Reserved5;		/*0x32 */
+} MPI2_SCSI_TASK_MANAGE_REQUEST,
+	*PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
+	Mpi2SCSITaskManagementRequest_t,
+	*pMpi2SCSITaskManagementRequest_t;
+
+/*TaskType values */
+
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK           (0x01)
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET        (0x02)
+#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET         (0x03)
+#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET   (0x05)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET       (0x06)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK           (0x07)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA              (0x08)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET         (0x09)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT      (0x0A)
+
+/*obsolete TaskType name */
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
+		(MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
+
+/*MsgFlags bits */
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET    (0x18)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET           (0x00)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST     (0x08)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET  (0x10)
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU  (0x01)
+
+/*SCSI Task Management Reply Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 ResponseCode;	/*0x04 */
+	U8 TaskType;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TerminationCount;	/*0x14 */
+	U32 ResponseInfo;	/*0x18 */
+} MPI2_SCSI_TASK_MANAGE_REPLY,
+	*PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
+	Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t;
+
+/*ResponseCode values */
+
+#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE               (0x00)
+#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME             (0x02)
+#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED          (0x04)
+#define MPI2_SCSITASKMGMT_RSP_TM_FAILED                 (0x05)
+#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED              (0x08)
+#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN            (0x09)
+#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG         (0x0A)
+#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC          (0x80)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE            (0x000000FF)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE           (0)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI2                  (0x0000FF00)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2                 (8)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI1                  (0x00FF0000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1                 (16)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI0                  (0xFF000000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0                 (24)
+
+/****************************************************************************
+* SCSI Enclosure Processor messages
+****************************************************************************/
+
+/*SCSI Enclosure Processor Request Message */
+typedef struct _MPI2_SEP_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Action;		/*0x04 */
+	U8 Flags;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 SlotStatus;		/*0x0C */
+	U32 Reserved3;		/*0x10 */
+	U32 Reserved4;		/*0x14 */
+	U32 Reserved5;		/*0x18 */
+	U16 Slot;		/*0x1C */
+	U16 EnclosureHandle;	/*0x1E */
+} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST,
+	Mpi2SepRequest_t, *pMpi2SepRequest_t;
+
+/*Action defines */
+#define MPI2_SEP_REQ_ACTION_WRITE_STATUS                (0x00)
+#define MPI2_SEP_REQ_ACTION_READ_STATUS                 (0x01)
+
+/*Flags defines */
+#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS            (0x00)
+#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS       (0x01)
+
+/*SlotStatus defines */
+#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE          (0x00040000)
+#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST        (0x00020000)
+#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED         (0x00000200)
+#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE               (0x00000100)
+#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED            (0x00000080)
+#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT         (0x00000040)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY       (0x00000010)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY         (0x00000008)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING          (0x00000004)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY              (0x00000002)
+#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR                (0x00000001)
+
+/*SCSI Enclosure Processor Reply Message */
+typedef struct _MPI2_SEP_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Action;		/*0x04 */
+	U8 Flags;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 SlotStatus;		/*0x14 */
+	U32 Reserved4;		/*0x18 */
+	U16 Slot;		/*0x1C */
+	U16 EnclosureHandle;	/*0x1E */
+} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY,
+	Mpi2SepReply_t, *pMpi2SepReply_t;
+
+/*SlotStatus defines */
+#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY          (0x00040000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST      (0x00020000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED       (0x00000200)
+#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE             (0x00000100)
+#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED          (0x00000080)
+#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT       (0x00000040)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY     (0x00000010)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY       (0x00000008)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING        (0x00000004)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY            (0x00000002)
+#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR              (0x00000001)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
new file mode 100644
index 0000000..0de425d
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -0,0 +1,1665 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_ioc.h
+ *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
+ * Creation Date:  October 11, 2006
+ *
+ * mpi2_ioc.h Version:  02.00.21
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
+ *                     MaxTargets.
+ *                     Added TotalImageSize field to FWDownload Request.
+ *                     Added reserved words to FWUpload Request.
+ * 06-26-07  02.00.02  Added IR Configuration Change List Event.
+ * 08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
+ *                     request and replaced it with
+ *                     ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ *                     Replaced the MinReplyQueueDepth field of the IOCFacts
+ *                     reply with MaxReplyDescriptorPostQueueDepth.
+ *                     Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ *                     depth for the Reply Descriptor Post Queue.
+ *                     Added SASAddress field to Initiator Device Table
+ *                     Overflow Event data.
+ * 10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ *                     for SAS Initiator Device Status Change Event data.
+ *                     Modified Reason Code defines for SAS Topology Change
+ *                     List Event data, including adding a bit for PHY Vacant
+ *                     status, and adding a mask for the Reason Code.
+ *                     Added define for
+ *                     MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ *                     Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ * 12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
+ *                     the IOCFacts Reply.
+ *                     Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ *                     Moved MPI2_VERSION_UNION to mpi2.h.
+ *                     Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ *                     instead of enables, and added SASBroadcastPrimitiveMasks
+ *                     field.
+ *                     Added Log Entry Added Event and related structure.
+ * 02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ *                     Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ *                     Added MaxVolumes and MaxPersistentEntries fields to
+ *                     IOCFacts reply.
+ *                     Added ProtocalFlags and IOCCapabilities fields to
+ *                     MPI2_FW_IMAGE_HEADER.
+ *                     Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ * 03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ *                     a U16 (from a U32).
+ *                     Removed extra 's' from EventMasks name.
+ * 06-27-08  02.00.08  Fixed an offset in a comment.
+ * 10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ *                     Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ *                     renamed MinReplyFrameSize to ReplyFrameSize.
+ *                     Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ *                     Added two new RAIDOperation values for Integrated RAID
+ *                     Operations Status Event data.
+ *                     Added four new IR Configuration Change List Event data
+ *                     ReasonCode values.
+ *                     Added two new ReasonCode defines for SAS Device Status
+ *                     Change Event data.
+ *                     Added three new DiscoveryStatus bits for the SAS
+ *                     Discovery event data.
+ *                     Added Multiplexing Status Change bit to the PhyStatus
+ *                     field of the SAS Topology Change List event data.
+ *                     Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ *                     BootFlags are now product-specific.
+ *                     Added defines for the indivdual signature bytes
+ *                     for MPI2_INIT_IMAGE_FOOTER.
+ * 01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ *                     Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ *                     define.
+ *                     Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ *                     define.
+ *                     Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ *                     Added two new reason codes for SAS Device Status Change
+ *                     Event.
+ *                     Added new event: SAS PHY Counter.
+ * 07-30-09  02.00.12  Added GPIO Interrupt event define and structure.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ *                     Added new product id family for 2208.
+ * 10-28-09  02.00.13  Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ *                     Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ *                     Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ *                     Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ *                     Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ *                     Added Host Based Discovery Phy Event data.
+ *                     Added defines for ProductID Product field
+ *                     (MPI2_FW_HEADER_PID_).
+ *                     Modified values for SAS ProductID Family
+ *                     (MPI2_FW_HEADER_PID_FAMILY_).
+ * 02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
+ *                     Added PowerManagementControl Request structures and
+ *                     defines.
+ * 05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
+ *                     Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
+ * 11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
+ *                     SASNotifyPrimitiveMasks field to
+ *                     MPI2_EVENT_NOTIFICATION_REQUEST.
+ *                     Added Temperature Threshold Event.
+ *                     Added Host Message Event.
+ *                     Added Send Host Message request and reply.
+ * 05-25-11  02.00.18  For Extended Image Header, added
+ *                     MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
+ *                     MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
+ *                     Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
+ * 08-24-11  02.00.19  Added PhysicalPort field to
+ *                     MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
+ *                     Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
+ * 11-18-11  02.00.20  Incorporating additions for MPI v2.5.
+ * 03-29-12  02.00.21  Added a product specific range to event values.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_IOC_H
+#define MPI2_IOC_H
+
+/*****************************************************************************
+*
+*              IOC Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IOCInit message
+****************************************************************************/
+
+/*IOCInit Request message */
+typedef struct _MPI2_IOC_INIT_REQUEST {
+	U8 WhoInit;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 MsgVersion;		/*0x0C */
+	U16 HeaderVersion;	/*0x0E */
+	U32 Reserved5;		/*0x10 */
+	U16 Reserved6;		/*0x14 */
+	U8 Reserved7;		/*0x16 */
+	U8 HostMSIxVectors;	/*0x17 */
+	U16 Reserved8;		/*0x18 */
+	U16 SystemRequestFrameSize;	/*0x1A */
+	U16 ReplyDescriptorPostQueueDepth;	/*0x1C */
+	U16 ReplyFreeQueueDepth;	/*0x1E */
+	U32 SenseBufferAddressHigh;	/*0x20 */
+	U32 SystemReplyAddressHigh;	/*0x24 */
+	U64 SystemRequestFrameBaseAddress;	/*0x28 */
+	U64 ReplyDescriptorPostQueueAddress;	/*0x30 */
+	U64 ReplyFreeQueueAddress;	/*0x38 */
+	U64 TimeStamp;		/*0x40 */
+} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
+	Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
+
+/*WhoInit values */
+#define MPI2_WHOINIT_NOT_INITIALIZED            (0x00)
+#define MPI2_WHOINIT_SYSTEM_BIOS                (0x01)
+#define MPI2_WHOINIT_ROM_BIOS                   (0x02)
+#define MPI2_WHOINIT_PCI_PEER                   (0x03)
+#define MPI2_WHOINIT_HOST_DRIVER                (0x04)
+#define MPI2_WHOINIT_MANUFACTURER               (0x05)
+
+/*MsgVersion */
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK      (0xFF00)
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT     (8)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK      (0x00FF)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT     (0)
+
+/*HeaderVersion */
+#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK       (0xFF00)
+#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT      (8)
+#define MPI2_IOCINIT_HDRVERSION_DEV_MASK        (0x00FF)
+#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT       (0)
+
+/*minimum depth for the Reply Descriptor Post Queue */
+#define MPI2_RDPQ_DEPTH_MIN                     (16)
+
+/*IOCInit Reply message */
+typedef struct _MPI2_IOC_INIT_REPLY {
+	U8 WhoInit;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
+	Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
+
+/****************************************************************************
+* IOCFacts message
+****************************************************************************/
+
+/*IOCFacts Request message */
+typedef struct _MPI2_IOC_FACTS_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
+	Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
+
+/*IOCFacts Reply message */
+typedef struct _MPI2_IOC_FACTS_REPLY {
+	U16 MsgVersion;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 HeaderVersion;	/*0x04 */
+	U8 IOCNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U16 IOCExceptions;	/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 MaxChainDepth;	/*0x14 */
+	U8 WhoInit;		/*0x15 */
+	U8 NumberOfPorts;	/*0x16 */
+	U8 MaxMSIxVectors;	/*0x17 */
+	U16 RequestCredit;	/*0x18 */
+	U16 ProductID;		/*0x1A */
+	U32 IOCCapabilities;	/*0x1C */
+	MPI2_VERSION_UNION FWVersion;	/*0x20 */
+	U16 IOCRequestFrameSize;	/*0x24 */
+	U16 IOCMaxChainSegmentSize;	/*0x26 */
+	U16 MaxInitiators;	/*0x28 */
+	U16 MaxTargets;		/*0x2A */
+	U16 MaxSasExpanders;	/*0x2C */
+	U16 MaxEnclosures;	/*0x2E */
+	U16 ProtocolFlags;	/*0x30 */
+	U16 HighPriorityCredit;	/*0x32 */
+	U16 MaxReplyDescriptorPostQueueDepth;	/*0x34 */
+	U8 ReplyFrameSize;	/*0x36 */
+	U8 MaxVolumes;		/*0x37 */
+	U16 MaxDevHandle;	/*0x38 */
+	U16 MaxPersistentEntries;	/*0x3A */
+	U16 MinDevHandle;	/*0x3C */
+	U16 Reserved4;		/*0x3E */
+} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
+	Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
+
+/*MsgVersion */
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK             (0xFF00)
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT            (8)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK             (0x00FF)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT            (0)
+
+/*HeaderVersion */
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK              (0xFF00)
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT             (8)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK               (0x00FF)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT              (0)
+
+/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX      (0x0100)
+
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK              (0x00E0)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD              (0x0000)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP            (0x0020)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED          (0x0040)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP    (0x0060)
+
+#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED       (0x0010)
+#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL     (0x0008)
+#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL           (0x0004)
+#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID        (0x0002)
+#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL       (0x0001)
+
+/*defines for WhoInit field are after the IOCInit Request */
+
+/*ProductID field uses MPI2_FW_HEADER_PID_ */
+
+/*IOCCapabilities */
+#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE     (0x00020000)
+#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY   (0x00010000)
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX            (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR       (0x00004000)
+#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY           (0x00002000)
+#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID        (0x00001000)
+#define MPI2_IOCFACTS_CAPABILITY_TLR                    (0x00000800)
+#define MPI2_IOCFACTS_CAPABILITY_MULTICAST              (0x00000100)
+#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET   (0x00000080)
+#define MPI2_IOCFACTS_CAPABILITY_EEDP                   (0x00000040)
+#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER        (0x00000020)
+#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER        (0x00000010)
+#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER      (0x00000008)
+#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
+
+/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET              (0x0001)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR           (0x0002)
+
+/****************************************************************************
+* PortFacts message
+****************************************************************************/
+
+/*PortFacts Request message */
+typedef struct _MPI2_PORT_FACTS_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 PortNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
+	Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
+
+/*PortFacts Reply message */
+typedef struct _MPI2_PORT_FACTS_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 PortNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 Reserved5;		/*0x14 */
+	U8 PortType;		/*0x15 */
+	U16 Reserved6;		/*0x16 */
+	U16 MaxPostedCmdBuffers;	/*0x18 */
+	U16 Reserved7;		/*0x1A */
+} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
+	Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
+
+/*PortType values */
+#define MPI2_PORTFACTS_PORTTYPE_INACTIVE            (0x00)
+#define MPI2_PORTFACTS_PORTTYPE_FC                  (0x10)
+#define MPI2_PORTFACTS_PORTTYPE_ISCSI               (0x20)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL        (0x30)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL         (0x31)
+
+/****************************************************************************
+* PortEnable message
+****************************************************************************/
+
+/*PortEnable Request message */
+typedef struct _MPI2_PORT_ENABLE_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved2;		/*0x04 */
+	U8 PortFlags;		/*0x05 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
+	Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
+
+/*PortEnable Reply message */
+typedef struct _MPI2_PORT_ENABLE_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved2;		/*0x04 */
+	U8 PortFlags;		/*0x05 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
+	Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
+
+/****************************************************************************
+* EventNotification message
+****************************************************************************/
+
+/*EventNotification Request message */
+#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS           (4)
+
+typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];	/*0x14 */
+	U16 SASBroadcastPrimitiveMasks;	/*0x24 */
+	U16 SASNotifyPrimitiveMasks;	/*0x26 */
+	U32 Reserved8;		/*0x28 */
+} MPI2_EVENT_NOTIFICATION_REQUEST,
+	*PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
+	Mpi2EventNotificationRequest_t,
+	*pMpi2EventNotificationRequest_t;
+
+/*EventNotification Reply message */
+typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
+	U16 EventDataLength;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 AckRequired;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U16 Event;		/*0x14 */
+	U16 Reserved4;		/*0x16 */
+	U32 EventContext;	/*0x18 */
+	U32 EventData[1];	/*0x1C */
+} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
+	Mpi2EventNotificationReply_t,
+	*pMpi2EventNotificationReply_t;
+
+/*AckRequired */
+#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED    (0x00)
+#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED        (0x01)
+
+/*Event */
+#define MPI2_EVENT_LOG_DATA                         (0x0001)
+#define MPI2_EVENT_STATE_CHANGE                     (0x0002)
+#define MPI2_EVENT_HARD_RESET_RECEIVED              (0x0005)
+#define MPI2_EVENT_EVENT_CHANGE                     (0x000A)
+#define MPI2_EVENT_TASK_SET_FULL                    (0x000E)	/*obsolete */
+#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE         (0x000F)
+#define MPI2_EVENT_IR_OPERATION_STATUS              (0x0014)
+#define MPI2_EVENT_SAS_DISCOVERY                    (0x0016)
+#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE          (0x0017)
+#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE    (0x0018)
+#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW          (0x0019)
+#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST         (0x001C)
+#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE    (0x001D)
+#define MPI2_EVENT_IR_VOLUME                        (0x001E)
+#define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
+#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
+#define MPI2_EVENT_LOG_ENTRY_ADDED                  (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
+#define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
+#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
+#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE         (0x0029)
+#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC             (0x006E)
+#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC             (0x007F)
+
+/*Log Entry Added Event data */
+
+/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
+#define MPI2_EVENT_DATA_LOG_DATA_LENGTH             (0x1C)
+
+typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
+	U64 TimeStamp;		/*0x00 */
+	U32 Reserved1;		/*0x08 */
+	U16 LogSequence;	/*0x0C */
+	U16 LogEntryQualifier;	/*0x0E */
+	U8 VP_ID;		/*0x10 */
+	U8 VF_ID;		/*0x11 */
+	U16 Reserved2;		/*0x12 */
+	U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];	/*0x14 */
+} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+	*PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+	Mpi2EventDataLogEntryAdded_t,
+	*pMpi2EventDataLogEntryAdded_t;
+
+/*GPIO Interrupt Event data */
+
+typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
+	U8 GPIONum;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+} MPI2_EVENT_DATA_GPIO_INTERRUPT,
+	*PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
+	Mpi2EventDataGpioInterrupt_t,
+	*pMpi2EventDataGpioInterrupt_t;
+
+/*Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+	U16 Status;		/*0x00 */
+	U8 SensorNum;		/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U16 CurrentTemperature;	/*0x04 */
+	U16 Reserved2;		/*0x06 */
+	U32 Reserved3;		/*0x08 */
+	U32 Reserved4;		/*0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+	*PTR_MPI2_EVENT_DATA_TEMPERATURE,
+	Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
+
+/*Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
+
+/*Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+	U8 SourceVF_ID;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+	U32 HostData[1];	/*0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+	Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
+
+/*Power Performance Change Event */
+
+typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
+	U8 CurrentPowerMode;	/*0x00 */
+	U8 PreviousPowerMode;	/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+	*PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+	Mpi2EventDataPowerPerfChange_t,
+	*pMpi2EventDataPowerPerfChange_t;
+
+/*defines for CurrentPowerMode and PreviousPowerMode fields */
+#define MPI2_EVENT_PM_INIT_MASK              (0xC0)
+#define MPI2_EVENT_PM_INIT_UNAVAILABLE       (0x00)
+#define MPI2_EVENT_PM_INIT_HOST              (0x40)
+#define MPI2_EVENT_PM_INIT_IO_UNIT           (0x80)
+#define MPI2_EVENT_PM_INIT_PCIE_DPA          (0xC0)
+
+#define MPI2_EVENT_PM_MODE_MASK              (0x07)
+#define MPI2_EVENT_PM_MODE_UNAVAILABLE       (0x00)
+#define MPI2_EVENT_PM_MODE_UNKNOWN           (0x01)
+#define MPI2_EVENT_PM_MODE_FULL_POWER        (0x04)
+#define MPI2_EVENT_PM_MODE_REDUCED_POWER     (0x05)
+#define MPI2_EVENT_PM_MODE_STANDBY           (0x06)
+
+/*Hard Reset Received Event data */
+
+typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
+	U8 Reserved1;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+	*PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+	Mpi2EventDataHardResetReceived_t,
+	*pMpi2EventDataHardResetReceived_t;
+
+/*Task Set Full Event data */
+/*  this event is obsolete */
+
+typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
+	U16 DevHandle;		/*0x00 */
+	U16 CurrentDepth;	/*0x02 */
+} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
+	Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
+
+/*SAS Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
+	U16 TaskTag;		/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U8 ASC;			/*0x04 */
+	U8 ASCQ;		/*0x05 */
+	U16 DevHandle;		/*0x06 */
+	U32 Reserved2;		/*0x08 */
+	U64 SASAddress;		/*0x0C */
+	U8 LUN[8];		/*0x14 */
+} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+	Mpi2EventDataSasDeviceStatusChange_t,
+	*pMpi2EventDataSasDeviceStatusChange_t;
+
+/*SAS Device Status Change Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA                           (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED                          (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE                    (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY       (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY   (0x12)
+
+/*Integrated RAID Operation Status Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
+	U16 VolDevHandle;	/*0x00 */
+	U16 Reserved1;		/*0x02 */
+	U8 RAIDOperation;	/*0x04 */
+	U8 PercentComplete;	/*0x05 */
+	U16 Reserved2;		/*0x06 */
+	U32 Resereved3;		/*0x08 */
+} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+	*PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+	Mpi2EventDataIrOperationStatus_t,
+	*pMpi2EventDataIrOperationStatus_t;
+
+/*Integrated RAID Operation Status Event data RAIDOperation values */
+#define MPI2_EVENT_IR_RAIDOP_RESYNC                     (0x00)
+#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION       (0x01)
+#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK          (0x02)
+#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT            (0x03)
+#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT       (0x04)
+
+/*Integrated RAID Volume Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
+	U16 VolDevHandle;	/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U32 NewValue;		/*0x04 */
+	U32 PreviousValue;	/*0x08 */
+} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
+	Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
+
+/*Integrated RAID Volume Event data ReasonCode values */
+#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED        (0x01)
+#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED    (0x02)
+#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED           (0x03)
+
+/*Integrated RAID Physical Disk Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
+	U16 Reserved1;		/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysDiskNum;		/*0x03 */
+	U16 PhysDiskDevHandle;	/*0x04 */
+	U16 Reserved2;		/*0x06 */
+	U16 Slot;		/*0x08 */
+	U16 EnclosureHandle;	/*0x0A */
+	U32 NewValue;		/*0x0C */
+	U32 PreviousValue;	/*0x10 */
+} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+	*PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+	Mpi2EventDataIrPhysicalDisk_t,
+	*pMpi2EventDataIrPhysicalDisk_t;
+
+/*Integrated RAID Physical Disk Event data ReasonCode values */
+#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED      (0x01)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED  (0x02)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED         (0x03)
+
+/*Integrated RAID Configuration Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumElements at runtime.
+ */
+#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
+#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT          (1)
+#endif
+
+typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
+	U16 ElementFlags;	/*0x00 */
+	U16 VolDevHandle;	/*0x02 */
+	U8 ReasonCode;		/*0x04 */
+	U8 PhysDiskNum;		/*0x05 */
+	U16 PhysDiskDevHandle;	/*0x06 */
+} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
+	Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
+
+/*IR Configuration Change List Event data ElementFlags values */
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK   (0x000F)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT      (0x0000)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT    (0x0002)
+
+/*IR Configuration Change List Event data ReasonCode values */
+#define MPI2_EVENT_IR_CHANGE_RC_ADDED                   (0x01)
+#define MPI2_EVENT_IR_CHANGE_RC_REMOVED                 (0x02)
+#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE               (0x03)
+#define MPI2_EVENT_IR_CHANGE_RC_HIDE                    (0x04)
+#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE                  (0x05)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED          (0x06)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED          (0x07)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED              (0x08)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED              (0x09)
+
+typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
+	U8 NumElements;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 Reserved2;		/*0x02 */
+	U8 ConfigNum;		/*0x03 */
+	U32 Flags;		/*0x04 */
+	MPI2_EVENT_IR_CONFIG_ELEMENT
+		ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
+} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+	*PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+	Mpi2EventDataIrConfigChangeList_t,
+	*pMpi2EventDataIrConfigChangeList_t;
+
+/*IR Configuration Change List Event data Flags values */
+#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG   (0x00000001)
+
+/*SAS Discovery Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
+	U8 Flags;		/*0x00 */
+	U8 ReasonCode;		/*0x01 */
+	U8 PhysicalPort;	/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U32 DiscoveryStatus;	/*0x04 */
+} MPI2_EVENT_DATA_SAS_DISCOVERY,
+	*PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
+	Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
+
+/*SAS Discovery Event data Flags values */
+#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE                   (0x02)
+#define MPI2_EVENT_SAS_DISC_IN_PROGRESS                     (0x01)
+
+/*SAS Discovery Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DISC_RC_STARTED                      (0x01)
+#define MPI2_EVENT_SAS_DISC_RC_COMPLETED                    (0x02)
+
+/*SAS Discovery Event data DiscoveryStatus values */
+#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED               (0x20000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
+#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR             (0x08000000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
+#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN                (0x00002000)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
+#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE               (0x00000800)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK                       (0x00000400)
+#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK                 (0x00000200)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR                    (0x00000100)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED              (0x00000080)
+#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST                  (0x00000040)
+#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES                (0x00000020)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT                      (0x00000010)
+#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS                   (0x00000004)
+#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE             (0x00000002)
+#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED                    (0x00000001)
+
+/*SAS Broadcast Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
+	U8 PhyNum;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U8 PortWidth;		/*0x02 */
+	U8 Primitive;		/*0x03 */
+} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+	*PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+	Mpi2EventDataSasBroadcastPrimitive_t,
+	*pMpi2EventDataSasBroadcastPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_PRIMITIVE_CHANGE                         (0x01)
+#define MPI2_EVENT_PRIMITIVE_SES                            (0x02)
+#define MPI2_EVENT_PRIMITIVE_EXPANDER                       (0x03)
+#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT             (0x04)
+#define MPI2_EVENT_PRIMITIVE_RESERVED3                      (0x05)
+#define MPI2_EVENT_PRIMITIVE_RESERVED4                      (0x06)
+#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
+#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
+
+/*SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+	U8 PhyNum;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U8 Reserved1;		/*0x02 */
+	U8 Primitive;		/*0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+	*PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+	Mpi2EventDataSasNotifyPrimitive_t,
+	*pMpi2EventDataSasNotifyPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
+
+/*SAS Initiator Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
+	U8 ReasonCode;		/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U16 DevHandle;		/*0x02 */
+	U64 SASAddress;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+	Mpi2EventDataSasInitDevStatusChange_t,
+	*pMpi2EventDataSasInitDevStatusChange_t;
+
+/*SAS Initiator Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_INIT_RC_ADDED                (0x01)
+#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING       (0x02)
+
+/*SAS Initiator Device Table Overflow Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
+	U16 MaxInit;		/*0x00 */
+	U16 CurrentInit;	/*0x02 */
+	U64 SASAddress;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+	*PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+	Mpi2EventDataSasInitTableOverflow_t,
+	*pMpi2EventDataSasInitTableOverflow_t;
+
+/*SAS Topology Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI2_EVENT_SAS_TOPO_PHY_COUNT           (1)
+#endif
+
+typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
+	U16 AttachedDevHandle;	/*0x00 */
+	U8 LinkRate;		/*0x02 */
+	U8 PhyStatus;		/*0x03 */
+} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
+	Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
+
+typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
+	U16 EnclosureHandle;	/*0x00 */
+	U16 ExpanderDevHandle;	/*0x02 */
+	U8 NumPhys;		/*0x04 */
+	U8 Reserved1;		/*0x05 */
+	U16 Reserved2;		/*0x06 */
+	U8 NumEntries;		/*0x08 */
+	U8 StartPhyNum;		/*0x09 */
+	U8 ExpStatus;		/*0x0A */
+	U8 PhysicalPort;	/*0x0B */
+	MPI2_EVENT_SAS_TOPO_PHY_ENTRY
+	PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT];	/*0x0C */
+} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+	*PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+	Mpi2EventDataSasTopologyChangeList_t,
+	*pMpi2EventDataSasTopologyChangeList_t;
+
+/*values for the ExpStatus field */
+#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER                  (0x00)
+#define MPI2_EVENT_SAS_TOPO_ES_ADDED                        (0x01)
+#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING               (0x02)
+#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING                   (0x03)
+#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING         (0x04)
+
+/*defines for the LinkRate field */
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK                 (0xF0)
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT                (4)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK                    (0x0F)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT                   (0)
+
+#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE            (0x00)
+#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED                 (0x01)
+#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED           (0x02)
+#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE            (0x03)
+#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR                (0x04)
+#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS        (0x05)
+#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY              (0x06)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5                     (0x08)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
+#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0                   (0x0B)
+
+/*values for the PhyStatus field */
+#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT                (0x80)
+#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE             (0x10)
+/*values for the PhyStatus ReasonCode sub-field */
+#define MPI2_EVENT_SAS_TOPO_RC_MASK                         (0x0F)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED                   (0x01)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING          (0x02)
+#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED                  (0x03)
+#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE                    (0x04)
+#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING         (0x05)
+
+/*SAS Enclosure Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
+	U16 EnclosureHandle;	/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U64 EnclosureLogicalID;	/*0x04 */
+	U16 NumSlots;		/*0x0C */
+	U16 StartSlot;		/*0x0E */
+	U32 PhyBits;		/*0x10 */
+} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+	Mpi2EventDataSasEnclDevStatusChange_t,
+	*pMpi2EventDataSasEnclDevStatusChange_t;
+
+/*SAS Enclosure Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_ENCL_RC_ADDED                (0x01)
+#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
+
+/*SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+	U64 TimeStamp;		/*0x00 */
+	U32 Reserved1;		/*0x08 */
+	U8 PhyEventCode;	/*0x0C */
+	U8 PhyNum;		/*0x0D */
+	U16 Reserved2;		/*0x0E */
+	U32 PhyEventInfo;	/*0x10 */
+	U8 CounterType;		/*0x14 */
+	U8 ThresholdWindow;	/*0x15 */
+	U8 TimeUnits;		/*0x16 */
+	U8 Reserved3;		/*0x17 */
+	U32 EventThreshold;	/*0x18 */
+	U16 ThresholdFlags;	/*0x1C */
+	U16 Reserved4;		/*0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+	*PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+	Mpi2EventDataSasPhyCounter_t,
+	*pMpi2EventDataSasPhyCounter_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
+ *for the PhyEventCode field */
+
+/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
+ *for the CounterType field */
+
+/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
+ *for the TimeUnits field */
+
+/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
+ *for the ThresholdFlags field */
+
+/*SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+	U8 ReasonCode;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+	*PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+	Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
+
+/*SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED                   (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED                 (0x02)
+
+/*Host Based Discovery Phy Event data */
+
+typedef struct _MPI2_EVENT_HBD_PHY_SAS {
+	U8 Flags;		/*0x00 */
+	U8 NegotiatedLinkRate;	/*0x01 */
+	U8 PhyNum;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U32 Reserved1;		/*0x04 */
+	U8 InitialFrame[28];	/*0x08 */
+} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
+	Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
+
+/*values for the Flags field */
+#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID        (0x02)
+#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME         (0x01)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
+ *for the NegotiatedLinkRate field */
+
+typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
+	MPI2_EVENT_HBD_PHY_SAS Sas;
+} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
+	Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
+
+typedef struct _MPI2_EVENT_DATA_HBD_PHY {
+	U8 DescriptorType;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+	MPI2_EVENT_HBD_DESCRIPTOR Descriptor;	/*0x08 */
+} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
+	Mpi2EventDataHbdPhy_t,
+	*pMpi2EventDataMpi2EventDataHbdPhy_t;
+
+/*values for the DescriptorType field */
+#define MPI2_EVENT_HBD_DT_SAS               (0x01)
+
+/****************************************************************************
+* EventAck message
+****************************************************************************/
+
+/*EventAck Request message */
+typedef struct _MPI2_EVENT_ACK_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Event;		/*0x0C */
+	U16 Reserved5;		/*0x0E */
+	U32 EventContext;	/*0x10 */
+} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
+	Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
+
+/*EventAck Reply message */
+typedef struct _MPI2_EVENT_ACK_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
+	Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
+
+/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/*SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+	U16 HostDataLength;	/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 Reserved4;		/*0x0C */
+	U8 DestVF_ID;		/*0x0D */
+	U16 Reserved5;		/*0x0E */
+	U32 Reserved6;		/*0x10 */
+	U32 Reserved7;		/*0x14 */
+	U32 Reserved8;		/*0x18 */
+	U32 Reserved9;		/*0x1C */
+	U32 Reserved10;		/*0x20 */
+	U32 HostData[1];	/*0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+	*PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+	Mpi2SendHostMessageRequest_t,
+	*pMpi2SendHostMessageRequest_t;
+
+/*SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+	U16 HostDataLength;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+	Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
+
+/****************************************************************************
+* FWDownload message
+****************************************************************************/
+
+/*MPI v2.0 FWDownload Request message */
+typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 TotalImageSize;	/*0x0C */
+	U32 Reserved5;		/*0x10 */
+	MPI2_MPI_SGE_UNION SGL;	/*0x14 */
+} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
+	Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
+
+#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT   (0x01)
+
+#define MPI2_FW_DOWNLOAD_ITYPE_FW                   (0x01)
+#define MPI2_FW_DOWNLOAD_ITYPE_BIOS                 (0x02)
+#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING        (0x06)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1             (0x07)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2             (0x08)
+#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID             (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
+#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
+
+/*MPI v2.0 FWDownload TransactionContext Element */
+typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
+	U8 Reserved1;		/*0x00 */
+	U8 ContextSize;		/*0x01 */
+	U8 DetailsLength;	/*0x02 */
+	U8 Flags;		/*0x03 */
+	U32 Reserved2;		/*0x04 */
+	U32 ImageOffset;	/*0x08 */
+	U32 ImageSize;		/*0x0C */
+} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
+	Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
+
+/*MPI v2.5 FWDownload Request message */
+typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 TotalImageSize;	/*0x0C */
+	U32 Reserved5;		/*0x10 */
+	U32 Reserved6;		/*0x14 */
+	U32 ImageOffset;	/*0x18 */
+	U32 ImageSize;		/*0x1C */
+	MPI25_SGE_IO_UNION SGL;	/*0x20 */
+} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
+	Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
+
+/*FWDownload Reply message */
+typedef struct _MPI2_FW_DOWNLOAD_REPLY {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
+	Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
+
+/****************************************************************************
+* FWUpload message
+****************************************************************************/
+
+/*MPI v2.0 FWUpload Request message */
+typedef struct _MPI2_FW_UPLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	MPI2_MPI_SGE_UNION SGL;	/*0x14 */
+} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
+	Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
+
+#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT         (0x00)
+#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH           (0x01)
+#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH         (0x02)
+#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP          (0x05)
+#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING      (0x06)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1           (0x07)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2           (0x08)
+#define MPI2_FW_UPLOAD_ITYPE_MEGARAID           (0x09)
+#define MPI2_FW_UPLOAD_ITYPE_COMPLETE           (0x0A)
+#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK  (0x0B)
+
+/*MPI v2.0 FWUpload TransactionContext Element */
+typedef struct _MPI2_FW_UPLOAD_TCSGE {
+	U8 Reserved1;		/*0x00 */
+	U8 ContextSize;		/*0x01 */
+	U8 DetailsLength;	/*0x02 */
+	U8 Flags;		/*0x03 */
+	U32 Reserved2;		/*0x04 */
+	U32 ImageOffset;	/*0x08 */
+	U32 ImageSize;		/*0x0C */
+} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
+	Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
+
+/*MPI v2.5 FWUpload Request message */
+typedef struct _MPI25_FW_UPLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U32 Reserved7;		/*0x14 */
+	U32 ImageOffset;	/*0x18 */
+	U32 ImageSize;		/*0x1C */
+	MPI25_SGE_IO_UNION SGL;	/*0x20 */
+} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
+	Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
+
+/*FWUpload Reply message */
+typedef struct _MPI2_FW_UPLOAD_REPLY {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 ActualImageSize;	/*0x14 */
+} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
+	Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
+
+/*FW Image Header */
+typedef struct _MPI2_FW_IMAGE_HEADER {
+	U32 Signature;		/*0x00 */
+	U32 Signature0;		/*0x04 */
+	U32 Signature1;		/*0x08 */
+	U32 Signature2;		/*0x0C */
+	MPI2_VERSION_UNION MPIVersion;	/*0x10 */
+	MPI2_VERSION_UNION FWVersion;	/*0x14 */
+	MPI2_VERSION_UNION NVDATAVersion;	/*0x18 */
+	MPI2_VERSION_UNION PackageVersion;	/*0x1C */
+	U16 VendorID;		/*0x20 */
+	U16 ProductID;		/*0x22 */
+	U16 ProtocolFlags;	/*0x24 */
+	U16 Reserved26;		/*0x26 */
+	U32 IOCCapabilities;	/*0x28 */
+	U32 ImageSize;		/*0x2C */
+	U32 NextImageHeaderOffset;	/*0x30 */
+	U32 Checksum;		/*0x34 */
+	U32 Reserved38;		/*0x38 */
+	U32 Reserved3C;		/*0x3C */
+	U32 Reserved40;		/*0x40 */
+	U32 Reserved44;		/*0x44 */
+	U32 Reserved48;		/*0x48 */
+	U32 Reserved4C;		/*0x4C */
+	U32 Reserved50;		/*0x50 */
+	U32 Reserved54;		/*0x54 */
+	U32 Reserved58;		/*0x58 */
+	U32 Reserved5C;		/*0x5C */
+	U32 Reserved60;		/*0x60 */
+	U32 FirmwareVersionNameWhat;	/*0x64 */
+	U8 FirmwareVersionName[32];	/*0x68 */
+	U32 VendorNameWhat;	/*0x88 */
+	U8 VendorName[32];	/*0x8C */
+	U32 PackageNameWhat;	/*0x88 */
+	U8 PackageName[32];	/*0x8C */
+	U32 ReservedD0;		/*0xD0 */
+	U32 ReservedD4;		/*0xD4 */
+	U32 ReservedD8;		/*0xD8 */
+	U32 ReservedDC;		/*0xDC */
+	U32 ReservedE0;		/*0xE0 */
+	U32 ReservedE4;		/*0xE4 */
+	U32 ReservedE8;		/*0xE8 */
+	U32 ReservedEC;		/*0xEC */
+	U32 ReservedF0;		/*0xF0 */
+	U32 ReservedF4;		/*0xF4 */
+	U32 ReservedF8;		/*0xF8 */
+	U32 ReservedFC;		/*0xFC */
+} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
+	Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
+
+/*Signature field */
+#define MPI2_FW_HEADER_SIGNATURE_OFFSET         (0x00)
+#define MPI2_FW_HEADER_SIGNATURE_MASK           (0xFF000000)
+#define MPI2_FW_HEADER_SIGNATURE                (0xEA000000)
+
+/*Signature0 field */
+#define MPI2_FW_HEADER_SIGNATURE0_OFFSET        (0x04)
+#define MPI2_FW_HEADER_SIGNATURE0               (0x5AFAA55A)
+
+/*Signature1 field */
+#define MPI2_FW_HEADER_SIGNATURE1_OFFSET        (0x08)
+#define MPI2_FW_HEADER_SIGNATURE1               (0xA55AFAA5)
+
+/*Signature2 field */
+#define MPI2_FW_HEADER_SIGNATURE2_OFFSET        (0x0C)
+#define MPI2_FW_HEADER_SIGNATURE2               (0x5AA55AFA)
+
+/*defines for using the ProductID field */
+#define MPI2_FW_HEADER_PID_TYPE_MASK            (0xF000)
+#define MPI2_FW_HEADER_PID_TYPE_SAS             (0x2000)
+
+#define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A                       (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI   (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI                 (0x0700)
+
+#define MPI2_FW_HEADER_PID_FAMILY_MASK          (0x00FF)
+/*SAS ProductID Family bits */
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS      (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS      (0x0014)
+#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS     (0x0021)
+
+/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
+
+/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
+
+#define MPI2_FW_HEADER_IMAGESIZE_OFFSET         (0x2C)
+#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET         (0x30)
+#define MPI2_FW_HEADER_VERNMHWAT_OFFSET         (0x64)
+
+#define MPI2_FW_HEADER_WHAT_SIGNATURE           (0x29232840)
+
+#define MPI2_FW_HEADER_SIZE                     (0x100)
+
+/*Extended Image Header */
+typedef struct _MPI2_EXT_IMAGE_HEADER {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Checksum;		/*0x04 */
+	U32 ImageSize;		/*0x08 */
+	U32 NextImageHeaderOffset;	/*0x0C */
+	U32 PackageVersion;	/*0x10 */
+	U32 Reserved3;		/*0x14 */
+	U32 Reserved4;		/*0x18 */
+	U32 Reserved5;		/*0x1C */
+	U8 IdentifyString[32];	/*0x20 */
+} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
+	Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
+
+/*useful offsets */
+#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET         (0x00)
+#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET         (0x08)
+#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET         (0x0C)
+
+#define MPI2_EXT_IMAGE_HEADER_SIZE              (0x40)
+
+/*defines for the ImageType field */
+#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED             (0x00)
+#define MPI2_EXT_IMAGE_TYPE_FW                      (0x01)
+#define MPI2_EXT_IMAGE_TYPE_NVDATA                  (0x03)
+#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER              (0x04)
+#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION          (0x05)
+#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT            (0x06)
+#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES       (0x07)
+#define MPI2_EXT_IMAGE_TYPE_MEGARAID                (0x08)
+#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC    (0x80)
+#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC    (0xFF)
+
+#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
+
+/*FLASH Layout Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check RegionsPerLayout at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
+#define MPI2_FLASH_NUMBER_OF_REGIONS        (1)
+#endif
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfLayouts at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
+#define MPI2_FLASH_NUMBER_OF_LAYOUTS        (1)
+#endif
+
+typedef struct _MPI2_FLASH_REGION {
+	U8 RegionType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 RegionOffset;	/*0x04 */
+	U32 RegionSize;		/*0x08 */
+	U32 Reserved3;		/*0x0C */
+} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
+	Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
+
+typedef struct _MPI2_FLASH_LAYOUT {
+	U32 FlashSize;		/*0x00 */
+	U32 Reserved1;		/*0x04 */
+	U32 Reserved2;		/*0x08 */
+	U32 Reserved3;		/*0x0C */
+	MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];	/*0x10 */
+} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
+	Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
+
+typedef struct _MPI2_FLASH_LAYOUT_DATA {
+	U8 ImageRevision;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 SizeOfRegion;	/*0x02 */
+	U8 Reserved2;		/*0x03 */
+	U16 NumberOfLayouts;	/*0x04 */
+	U16 RegionsPerLayout;	/*0x06 */
+	U16 MinimumSectorAlignment;	/*0x08 */
+	U16 Reserved3;		/*0x0A */
+	U32 Reserved4;		/*0x0C */
+	MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];	/*0x10 */
+} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
+	Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
+
+/*defines for the RegionType field */
+#define MPI2_FLASH_REGION_UNUSED                (0x00)
+#define MPI2_FLASH_REGION_FIRMWARE              (0x01)
+#define MPI2_FLASH_REGION_BIOS                  (0x02)
+#define MPI2_FLASH_REGION_NVDATA                (0x03)
+#define MPI2_FLASH_REGION_FIRMWARE_BACKUP       (0x05)
+#define MPI2_FLASH_REGION_MFG_INFORMATION       (0x06)
+#define MPI2_FLASH_REGION_CONFIG_1              (0x07)
+#define MPI2_FLASH_REGION_CONFIG_2              (0x08)
+#define MPI2_FLASH_REGION_MEGARAID              (0x09)
+#define MPI2_FLASH_REGION_INIT                  (0x0A)
+
+/*ImageRevision */
+#define MPI2_FLASH_LAYOUT_IMAGE_REVISION        (0x00)
+
+/*Supported Devices Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfDevices at runtime.
+ */
+#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
+#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES    (1)
+#endif
+
+typedef struct _MPI2_SUPPORTED_DEVICE {
+	U16 DeviceID;		/*0x00 */
+	U16 VendorID;		/*0x02 */
+	U16 DeviceIDMask;	/*0x04 */
+	U16 Reserved1;		/*0x06 */
+	U8 LowPCIRev;		/*0x08 */
+	U8 HighPCIRev;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 Reserved3;		/*0x0C */
+} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
+	Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
+
+typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
+	U8 ImageRevision;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 NumberOfDevices;	/*0x02 */
+	U8 Reserved2;		/*0x03 */
+	U32 Reserved3;		/*0x04 */
+	MPI2_SUPPORTED_DEVICE
+	SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
+	Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
+
+/*ImageRevision */
+#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION   (0x00)
+
+/*Init Extended Image Data */
+
+typedef struct _MPI2_INIT_IMAGE_FOOTER {
+	U32 BootFlags;		/*0x00 */
+	U32 ImageSize;		/*0x04 */
+	U32 Signature0;		/*0x08 */
+	U32 Signature1;		/*0x0C */
+	U32 Signature2;		/*0x10 */
+	U32 ResetVector;	/*0x14 */
+} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
+	Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
+
+/*defines for the BootFlags field */
+#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET        (0x00)
+
+/*defines for the ImageSize field */
+#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET        (0x04)
+
+/*defines for the Signature0 field */
+#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET       (0x08)
+#define MPI2_INIT_IMAGE_SIGNATURE0              (0x5AA55AEA)
+
+/*defines for the Signature1 field */
+#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET       (0x0C)
+#define MPI2_INIT_IMAGE_SIGNATURE1              (0xA55AEAA5)
+
+/*defines for the Signature2 field */
+#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET       (0x10)
+#define MPI2_INIT_IMAGE_SIGNATURE2              (0x5AEAA55A)
+
+/*Signature fields as individual bytes */
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3        (0x5A)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7        (0xA5)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B        (0x5A)
+
+/*defines for the ResetVector field */
+#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET      (0x14)
+
+/****************************************************************************
+* PowerManagementControl message
+****************************************************************************/
+
+/*PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+	U8 Feature;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 Parameter1;		/*0x0C */
+	U8 Parameter2;		/*0x0D */
+	U8 Parameter3;		/*0x0E */
+	U8 Parameter4;		/*0x0F */
+	U32 Reserved5;		/*0x10 */
+	U32 Reserved6;		/*0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+	Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
+
+/*defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND       (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION   (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK               (0x03)	/*obsolete */
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED               (0x04)
+#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE    (0x05)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC    (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC    (0xFF)
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/*Parameter1 contains a PHY number */
+/*Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL                  (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER                  (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT            (0x03)
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ * Feature */
+/*Parameter1 contains SAS port width modulation group number */
+/*Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP        (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION        (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP     (0x03)
+/*Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT               (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT               (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT               (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT              (0x03)
+/*Parameter4 is reserved */
+
+/*this next set (_PCIE_LINK) is obsolete */
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/*Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS            (0x00)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS            (0x01)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS            (0x02)	/*obsolete */
+/*Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1                 (0x01)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2                 (0x02)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4                 (0x04)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8                 (0x08)	/*obsolete */
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/*Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED           (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED           (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED        (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED         (0x08)
+/*Parameter2, Parameter3, and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
+/*Parameter1 indicates host action regarding global power management mode */
+#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL             (0x01)
+#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE       (0x02)
+#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL          (0x03)
+/*Parameter2 indicates the requested global power management mode */
+#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF            (0x01)
+#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF         (0x08)
+#define MPI2_PM_CONTROL_PARAM2_STANDBY                  (0x40)
+/*Parameter3 and Parameter4 are reserved */
+
+/*PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+	U8 Feature;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+	Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
new file mode 100644
index 0000000..d1d9866
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -0,0 +1,346 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_raid.h
+ *         Title:  MPI Integrated RAID messages and structures
+ * Creation Date:  April 26, 2007
+ *
+ *   mpi2_raid.h Version:  02.00.08
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 08-31-07  02.00.01  Modifications to RAID Action request and reply,
+ *                     including the Actions and ActionData.
+ * 02-29-08  02.00.02  Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
+ * 05-21-08  02.00.03  Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
+ *                     the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
+ *                     can be sized by the build environment.
+ * 07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
+ *                     VolumeCreationFlags and marked the old one as obsolete.
+ * 05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
+ * 08-24-10  02.00.06  Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
+ *                     related structures and defines.
+ *                     Added product-specific range to RAID Action values.
+ * 11-18-11  02.00.07  Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.08  Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_RAID_H
+#define MPI2_RAID_H
+
+/*****************************************************************************
+*
+*              Integrated RAID Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* RAID Action messages
+****************************************************************************/
+
+/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
+#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0            (0x00000000)
+#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0            (0x00000001)
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
+#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD  (0x00000001)
+
+/*ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
+typedef struct _MPI2_RAID_ACTION_RATE_DATA {
+	U8 RateToChange;	/*0x00 */
+	U8 RateOrMode;		/*0x01 */
+	U16 DataScrubDuration;	/*0x02 */
+} MPI2_RAID_ACTION_RATE_DATA, *PTR_MPI2_RAID_ACTION_RATE_DATA,
+	Mpi2RaidActionRateData_t, *pMpi2RaidActionRateData_t;
+
+#define MPI2_RAID_ACTION_SET_RATE_RESYNC            (0x00)
+#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB        (0x01)
+#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE    (0x02)
+
+/*ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION {
+	U8 RAIDFunction;	/*0x00 */
+	U8 Flags;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_START_RAID_FUNCTION,
+	*PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
+	Mpi2RaidActionStartRaidFunction_t,
+	*pMpi2RaidActionStartRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_START_BACKGROUND_INIT      (0x00)
+#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK    (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_START_NEW                  (0x00)
+#define MPI2_RAID_ACTION_START_RESUME               (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION {
+	U8 RAIDFunction;	/*0x00 */
+	U8 Flags;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+	*PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+	Mpi2RaidActionStopRaidFunction_t,
+	*pMpi2RaidActionStopRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT       (0x00)
+#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION  (0x01)
+#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK     (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_STOP_ABORT                 (0x00)
+#define MPI2_RAID_ACTION_STOP_PAUSE                 (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
+typedef struct _MPI2_RAID_ACTION_HOT_SPARE {
+	U8 HotSparePool;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 DevHandle;		/*0x02 */
+} MPI2_RAID_ACTION_HOT_SPARE, *PTR_MPI2_RAID_ACTION_HOT_SPARE,
+	Mpi2RaidActionHotSpare_t, *pMpi2RaidActionHotSpare_t;
+
+/*ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
+typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE {
+	U8 Flags;		/*0x00 */
+	U8 DeviceFirmwareUpdateModeTimeout;	/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_FW_UPDATE_MODE,
+	*PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
+	Mpi2RaidActionFwUpdateMode_t,
+	*pMpi2RaidActionFwUpdateMode_t;
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
+#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE        (0x00)
+#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE         (0x01)
+
+typedef union _MPI2_RAID_ACTION_DATA {
+	U32 Word;
+	MPI2_RAID_ACTION_RATE_DATA Rates;
+	MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
+	MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
+	MPI2_RAID_ACTION_HOT_SPARE HotSpare;
+	MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
+} MPI2_RAID_ACTION_DATA, *PTR_MPI2_RAID_ACTION_DATA,
+	Mpi2RaidActionData_t, *pMpi2RaidActionData_t;
+
+/*RAID Action Request Message */
+typedef struct _MPI2_RAID_ACTION_REQUEST {
+	U8 Action;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 VolDevHandle;	/*0x04 */
+	U8 PhysDiskNum;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 Reserved3;		/*0x0C */
+	MPI2_RAID_ACTION_DATA ActionDataWord;	/*0x10 */
+	MPI2_SGE_SIMPLE_UNION ActionDataSGE;	/*0x14 */
+} MPI2_RAID_ACTION_REQUEST, *PTR_MPI2_RAID_ACTION_REQUEST,
+	Mpi2RaidActionRequest_t, *pMpi2RaidActionRequest_t;
+
+/*RAID Action request Action values */
+
+#define MPI2_RAID_ACTION_INDICATOR_STRUCT           (0x01)
+#define MPI2_RAID_ACTION_CREATE_VOLUME              (0x02)
+#define MPI2_RAID_ACTION_DELETE_VOLUME              (0x03)
+#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES        (0x04)
+#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES         (0x05)
+#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE           (0x0A)
+#define MPI2_RAID_ACTION_PHYSDISK_ONLINE            (0x0B)
+#define MPI2_RAID_ACTION_FAIL_PHYSDISK              (0x0F)
+#define MPI2_RAID_ACTION_ACTIVATE_VOLUME            (0x11)
+#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE      (0x15)
+#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE     (0x17)
+#define MPI2_RAID_ACTION_SET_VOLUME_NAME            (0x18)
+#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE     (0x19)
+#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME       (0x1C)
+#define MPI2_RAID_ACTION_CREATE_HOT_SPARE           (0x1D)
+#define MPI2_RAID_ACTION_DELETE_HOT_SPARE           (0x1E)
+#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED  (0x20)
+#define MPI2_RAID_ACTION_START_RAID_FUNCTION        (0x21)
+#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION         (0x22)
+#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK        (0x23)
+#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN            (0x24)
+#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC       (0x80)
+#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC       (0xFF)
+
+/*RAID Volume Creation Structure */
+
+/*
+ *The following define can be customized for the targeted product.
+ */
+#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
+#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS        (1)
+#endif
+
+typedef struct _MPI2_RAID_VOLUME_PHYSDISK {
+	U8 RAIDSetNum;		/*0x00 */
+	U8 PhysDiskMap;		/*0x01 */
+	U16 PhysDiskDevHandle;	/*0x02 */
+} MPI2_RAID_VOLUME_PHYSDISK, *PTR_MPI2_RAID_VOLUME_PHYSDISK,
+	Mpi2RaidVolumePhysDisk_t, *pMpi2RaidVolumePhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDACTION_PHYSDISK_PRIMARY            (0x01)
+#define MPI2_RAIDACTION_PHYSDISK_SECONDARY          (0x02)
+
+typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT {
+	U8 NumPhysDisks;	/*0x00 */
+	U8 VolumeType;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+	U32 VolumeCreationFlags;	/*0x04 */
+	U32 VolumeSettings;	/*0x08 */
+	U8 Reserved2;		/*0x0C */
+	U8 ResyncRate;		/*0x0D */
+	U16 DataScrubDuration;	/*0x0E */
+	U64 VolumeMaxLBA;	/*0x10 */
+	U32 StripeSize;		/*0x18 */
+	U8 Name[16];		/*0x1C */
+	MPI2_RAID_VOLUME_PHYSDISK
+		PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];	/*0x2C */
+} MPI2_RAID_VOLUME_CREATION_STRUCT,
+	*PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
+	Mpi2RaidVolumeCreationStruct_t,
+	*pMpi2RaidVolumeCreationStruct_t;
+
+/*use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
+
+/*defines for the VolumeCreationFlags field */
+#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS     (0x80000000)
+#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT      (0x00000004)
+#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT       (0x00000002)
+#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA         (0x00000001)
+/*The following is an obsolete define.
+ *It must be shifted left 24 bits in order to set the proper bit.
+ */
+#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
+
+/*RAID Online Capacity Expansion Structure */
+
+typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION {
+	U32 Flags;		/*0x00 */
+	U16 DevHandle0;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+	U16 DevHandle1;		/*0x08 */
+	U16 Reserved2;		/*0x0A */
+} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+	*PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+	Mpi2RaidOnlineCapacityExpansion_t,
+	*pMpi2RaidOnlineCapacityExpansion_t;
+
+/*RAID Compatibility Input Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
+	U16 SourceDevHandle;	/*0x00 */
+	U16 CandidateDevHandle;	/*0x02 */
+	U32 Flags;		/*0x04 */
+	U32 Reserved1;		/*0x08 */
+	U32 Reserved2;		/*0x0C */
+} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+	*PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+	Mpi2RaidCompatibilityInputStruct_t,
+	*pMpi2RaidCompatibilityInputStruct_t;
+
+/*defines for RAID Compatibility Structure Flags field */
+#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG      (0x00000002)
+#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG    (0x00000001)
+
+/*RAID Volume Indicator Structure */
+
+typedef struct _MPI2_RAID_VOL_INDICATOR {
+	U64 TotalBlocks;	/*0x00 */
+	U64 BlocksRemaining;	/*0x08 */
+	U32 Flags;		/*0x10 */
+} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
+	Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
+
+/*defines for RAID Volume Indicator Flags field */
+#define MPI2_RAID_VOL_FLAGS_OP_MASK                 (0x0000000F)
+#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT      (0x00000000)
+#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
+#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK    (0x00000002)
+#define MPI2_RAID_VOL_FLAGS_OP_RESYNC               (0x00000003)
+#define MPI2_RAID_VOL_FLAGS_OP_MDC                  (0x00000004)
+
+/*RAID Compatibility Result Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
+	U8 State;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 GenericAttributes;	/*0x04 */
+	U32 OEMSpecificAttributes;	/*0x08 */
+	U32 Reserved3;		/*0x0C */
+	U32 Reserved4;		/*0x10 */
+} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+	*PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+	Mpi2RaidCompatibilityResultStruct_t,
+	*pMpi2RaidCompatibilityResultStruct_t;
+
+/*defines for RAID Compatibility Result Structure State field */
+#define MPI2_RAID_COMPAT_STATE_COMPATIBLE           (0x00)
+#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE       (0x01)
+
+/*defines for RAID Compatibility Result Structure GenericAttributes field */
+#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR            (0x00000010)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK           (0x0000000C)
+#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE    (0x00000008)
+#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE      (0x00000004)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK        (0x00000003)
+#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL         (0x00000002)
+#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL        (0x00000001)
+
+/*RAID Action Reply ActionData union */
+typedef union _MPI2_RAID_ACTION_REPLY_DATA {
+	U32 Word[5];
+	MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
+	U16 VolDevHandle;
+	U8 VolumeState;
+	U8 PhysDiskNum;
+	MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult;
+} MPI2_RAID_ACTION_REPLY_DATA, *PTR_MPI2_RAID_ACTION_REPLY_DATA,
+	Mpi2RaidActionReplyData_t, *pMpi2RaidActionReplyData_t;
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*RAID Action Reply Message */
+typedef struct _MPI2_RAID_ACTION_REPLY {
+	U8 Action;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 VolDevHandle;	/*0x04 */
+	U8 PhysDiskNum;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	MPI2_RAID_ACTION_REPLY_DATA ActionData;	/*0x14 */
+} MPI2_RAID_ACTION_REPLY, *PTR_MPI2_RAID_ACTION_REPLY,
+	Mpi2RaidActionReply_t, *pMpi2RaidActionReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
new file mode 100644
index 0000000..b4e7084a
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -0,0 +1,295 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_sas.h
+ *         Title:  MPI Serial Attached SCSI structures and definitions
+ * Creation Date:  February 9, 2007
+ *
+ * mpi2_sas.h Version:  02.00.07
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
+ *                     Control Request.
+ * 10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
+ *                     Request.
+ * 10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ *                     to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ * 05-12-10  02.00.04  Modified some comments.
+ * 08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
+ * 11-18-11  02.00.06  Incorporating additions for MPI v2.5.
+ * 07-10-12  02.00.07  Added MPI2_SATA_PT_SGE_UNION for use in the SATA
+ *                     Passthrough Request message.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_SAS_H
+#define MPI2_SAS_H
+
+/*
+ *Values for SASStatus.
+ */
+#define MPI2_SASSTATUS_SUCCESS                          (0x00)
+#define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
+#define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
+#define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
+#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
+#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
+#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
+#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
+#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
+#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
+#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
+#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
+#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
+#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
+#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
+#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
+#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
+#define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
+#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
+#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
+#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
+
+/*
+ *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ *data and SAS Configuration pages.
+ */
+#define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
+#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
+#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
+#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
+#define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
+#define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
+#define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
+#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
+#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
+#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
+#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
+#define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
+
+#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
+#define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
+#define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
+#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
+#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
+
+/*****************************************************************************
+*
+*       SAS Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SMP Passthrough messages
+****************************************************************************/
+
+/*SMP Passthrough Request Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
+	U8 PassthroughFlags;	/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 RequestDataLength;	/*0x04 */
+	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U32 Reserved2;		/*0x0C */
+	U64 SASAddress;		/*0x10 */
+	U32 Reserved3;		/*0x18 */
+	U32 Reserved4;		/*0x1C */
+	MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
+} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
+	Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SMP Passthrough Reply Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
+	U8 PassthroughFlags;	/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 ResponseDataLength;	/*0x04 */
+	U8 SGLFlags;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U8 Reserved2;		/*0x0C */
+	U8 SASStatus;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 Reserved3;		/*0x14 */
+	U8 ResponseData[4];	/*0x18 */
+} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
+	Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SATA Passthrough messages
+****************************************************************************/
+
+typedef union _MPI2_SATA_PT_SGE_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;	/*MPI v2.0 only */
+	MPI2_SGE_CHAIN_UNION MpiChain;	/*MPI v2.0 only */
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+	MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;	/*MPI v2.0 only */
+	MPI25_IEEE_SGE_CHAIN64 IeeeChain64;	/*MPI v2.5 only */
+} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
+	Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
+
+/*SATA Passthrough Request Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 PassthroughFlags;	/*0x04 */
+	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U32 Reserved2;		/*0x0C */
+	U32 Reserved3;		/*0x10 */
+	U32 Reserved4;		/*0x14 */
+	U32 DataLength;		/*0x18 */
+	U8 CommandFIS[20];	/*0x1C */
+	MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
+} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
+	Mpi2SataPassthroughRequest_t,
+	*pMpi2SataPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SATA Passthrough Reply Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 PassthroughFlags;	/*0x04 */
+	U8 SGLFlags;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U8 Reserved2;		/*0x0C */
+	U8 SASStatus;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 StatusFIS[20];	/*0x14 */
+	U32 StatusControlRegisters;	/*0x28 */
+	U32 TransferCount;	/*0x2C */
+} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
+	Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SAS IO Unit Control messages
+****************************************************************************/
+
+/*SAS IO Unit Control Request Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
+	U8 Operation;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 DevHandle;		/*0x04 */
+	U8 IOCParameter;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U8 PhyNum;		/*0x0E */
+	U8 PrimFlags;		/*0x0F */
+	U32 Primitive;		/*0x10 */
+	U8 LookupMethod;	/*0x14 */
+	U8 Reserved5;		/*0x15 */
+	U16 SlotNumber;		/*0x16 */
+	U64 LookupAddress;	/*0x18 */
+	U32 IOCParameterValue;	/*0x20 */
+	U32 Reserved7;		/*0x24 */
+	U32 Reserved8;		/*0x28 */
+} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+	*PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+	Mpi2SasIoUnitControlRequest_t,
+	*pMpi2SasIoUnitControlRequest_t;
+
+/*values for the Operation field */
+#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
+#define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
+#define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
+#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
+#define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
+#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
+#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
+#define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
+#define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
+#define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
+#define MPI25_SAS_OP_ENABLE_FP_DEVICE           (0x10)
+#define MPI25_SAS_OP_DISABLE_FP_DEVICE          (0x11)
+#define MPI25_SAS_OP_ENABLE_FP_ALL              (0x12)
+#define MPI25_SAS_OP_DISABLE_FP_ALL             (0x13)
+#define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
+#define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
+#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
+
+/*values for the PrimFlags field */
+#define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
+#define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
+#define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
+
+/*values for the LookupMethod field */
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
+
+/*SAS IO Unit Control Reply Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
+	U8 Operation;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 DevHandle;		/*0x04 */
+	U8 IOCParameter;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_SAS_IOUNIT_CONTROL_REPLY,
+	*PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
+	Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
new file mode 100644
index 0000000..71453d1
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -0,0 +1,437 @@
+/*
+ * Copyright (c) 2000-2012 LSI Corporation.
+ *
+ *
+ *          Name:  mpi2_tool.h
+ *         Title:  MPI diagnostic tool structures and definitions
+ * Creation Date:  March 26, 2007
+ *
+ *   mpi2_tool.h Version:  02.00.09
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
+ *                     structures and defines.
+ * 02-29-08  02.00.02  Modified various names to make them 32-character unique.
+ * 05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * 07-30-09  02.00.04  Added ExtendedType field to DiagnosticBufferPost request
+ *                     and reply messages.
+ *                     Added MPI2_DIAG_BUF_TYPE_EXTENDED.
+ *                     Incremented MPI2_DIAG_BUF_TYPE_COUNT.
+ * 05-12-10  02.00.05  Added Diagnostic Data Upload tool.
+ * 08-11-10  02.00.06  Added defines that were missing for Diagnostic Buffer
+ *                     Post Request.
+ * 05-25-11  02.00.07  Added Flags field and related defines to
+ *                     MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
+ * 11-18-11  02.00.08  Incorporating additions for MPI v2.5.
+ * 07-10-12  02.00.09  Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
+ *                     message.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TOOL_H
+#define MPI2_TOOL_H
+
+/*****************************************************************************
+*
+*              Toolbox Messages
+*
+*****************************************************************************/
+
+/*defines for the Tools */
+#define MPI2_TOOLBOX_CLEAN_TOOL                     (0x00)
+#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL               (0x01)
+#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL          (0x02)
+#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL          (0x03)
+#define MPI2_TOOLBOX_BEACON_TOOL                    (0x05)
+#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL            (0x06)
+
+/****************************************************************************
+* Toolbox reply
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY,
+	Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t;
+
+/****************************************************************************
+* Toolbox Clean Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Flags;		/*0x0C */
+} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
+	Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES            (0x80000000)
+#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES   (0x40000000)
+#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES      (0x20000000)
+#define MPI2_TOOLBOX_CLEAN_FW_CURRENT               (0x10000000)
+#define MPI2_TOOLBOX_CLEAN_FW_BACKUP                (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_MEGARAID                 (0x02000000)
+#define MPI2_TOOLBOX_CLEAN_INITIALIZATION           (0x01000000)
+#define MPI2_TOOLBOX_CLEAN_FLASH                    (0x00000004)
+#define MPI2_TOOLBOX_CLEAN_SEEPROM                  (0x00000002)
+#define MPI2_TOOLBOX_CLEAN_NVSRAM                   (0x00000001)
+
+/****************************************************************************
+* Toolbox Memory Move request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x0C */
+} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
+	Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t;
+
+/****************************************************************************
+* Toolbox Diagnostic Data Upload request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 SGLFlags;		/*0x0C */
+	U8 Reserved5;		/*0x0D */
+	U16 Reserved6;		/*0x0E */
+	U32 Flags;		/*0x10 */
+	U32 DataLength;		/*0x14 */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x18 */
+} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+	*PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+	Mpi2ToolboxDiagDataUploadRequest_t,
+	*pMpi2ToolboxDiagDataUploadRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
+	U32 DiagDataLength;	/*00h */
+	U8 FormatCode;		/*04h */
+	U8 Reserved1;		/*05h */
+	U16 Reserved2;		/*06h */
+} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
+	Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t;
+
+/****************************************************************************
+* Toolbox ISTWI Read Write Tool
+****************************************************************************/
+
+/*Toolbox ISTWI Read Write Tool request message */
+typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U8 DevIndex;		/*0x14 */
+	U8 Action;		/*0x15 */
+	U8 SGLFlags;		/*0x16 */
+	U8 Flags;		/*0x17 */
+	U16 TxDataLength;	/*0x18 */
+	U16 RxDataLength;	/*0x1A */
+	U32 Reserved8;		/*0x1C */
+	U32 Reserved9;		/*0x20 */
+	U32 Reserved10;		/*0x24 */
+	U32 Reserved11;		/*0x28 */
+	U32 Reserved12;		/*0x2C */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x30 */
+} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+	*PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+	Mpi2ToolboxIstwiReadWriteRequest_t,
+	*pMpi2ToolboxIstwiReadWriteRequest_t;
+
+/*values for the Action field */
+#define MPI2_TOOL_ISTWI_ACTION_READ_DATA            (0x01)
+#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA           (0x02)
+#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE             (0x03)
+#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS          (0x10)
+#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS          (0x11)
+#define MPI2_TOOL_ISTWI_ACTION_RESET                (0x12)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*values for the Flags field */
+#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE   (0x80)
+#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK         (0x07)
+
+/*Toolbox ISTWI Read Write Tool reply message */
+typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 DevIndex;		/*0x14 */
+	U8 Action;		/*0x15 */
+	U8 IstwiStatus;		/*0x16 */
+	U8 Reserved6;		/*0x17 */
+	U16 TxDataCount;	/*0x18 */
+	U16 RxDataCount;	/*0x1A */
+} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY,
+	Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t;
+
+/****************************************************************************
+* Toolbox Beacon Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_BEACON_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 Reserved5;		/*0x0C */
+	U8 PhysicalPort;	/*0x0D */
+	U8 Reserved6;		/*0x0E */
+	U8 Flags;		/*0x0F */
+} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST,
+	Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF       (0x00)
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON        (0x01)
+
+/****************************************************************************
+* Toolbox Diagnostic CLI Tool
+****************************************************************************/
+
+#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH    (0x5C)
+
+/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 SGLFlags;		/*0x0C */
+	U8 Reserved5;		/*0x0D */
+	U16 Reserved6;		/*0x0E */
+	U32 DataLength;		/*0x10 */
+	U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x70 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	Mpi2ToolboxDiagnosticCliRequest_t,
+	*pMpi2ToolboxDiagnosticCliRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 DataLength;		/*0x10 */
+	U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+	MPI25_SGE_IO_UNION SGL;	/*0x70 */
+} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	Mpi25ToolboxDiagnosticCliRequest_t,
+	*pMpi25ToolboxDiagnosticCliRequest_t;
+
+/*Toolbox Diagnostic CLI Tool reply message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 ReturnedDataLength;	/*0x14 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
+	*PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
+	Mpi2ToolboxDiagnosticCliReply_t,
+	*pMpi2ToolboxDiagnosticCliReply_t;
+
+/*****************************************************************************
+*
+*      Diagnostic Buffer Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Diagnostic Buffer Post request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST {
+	U8 ExtendedType;	/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U64 BufferAddress;	/*0x0C */
+	U32 BufferLength;	/*0x14 */
+	U32 Reserved5;		/*0x18 */
+	U32 Reserved6;		/*0x1C */
+	U32 Flags;		/*0x20 */
+	U32 ProductSpecific[23];	/*0x24 */
+} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
+	Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t;
+
+/*values for the ExtendedType field */
+#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION         (0x02)
+
+/*values for the BufferType field */
+#define MPI2_DIAG_BUF_TYPE_TRACE                    (0x00)
+#define MPI2_DIAG_BUF_TYPE_SNAPSHOT                 (0x01)
+#define MPI2_DIAG_BUF_TYPE_EXTENDED                 (0x02)
+/*count of the number of buffer types */
+#define MPI2_DIAG_BUF_TYPE_COUNT                    (0x03)
+
+/*values for the Flags field */
+#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL          (0x00000002)
+#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE        (0x00000001)
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REPLY {
+	U8 ExtendedType;	/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TransferLength;	/*0x14 */
+} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY,
+	Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t;
+
+/****************************************************************************
+* Diagnostic Release request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REQUEST {
+	U8 Reserved1;		/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST,
+	Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t;
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REPLY {
+	U8 Reserved1;		/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY,
+	Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
new file mode 100644
index 0000000..516f959
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (c) 2000-2007 LSI Corporation.
+ *
+ *
+ *           Name:  mpi2_type.h
+ *          Title:  MPI basic type definitions
+ *  Creation Date:  August 16, 2006
+ *
+ *    mpi2_type.h Version:  02.00.00
+ *
+ *  Version History
+ *  ---------------
+ *
+ *  Date      Version   Description
+ *  --------  --------  ------------------------------------------------------
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TYPE_H
+#define MPI2_TYPE_H
+
+/*******************************************************************************
+ * Define * if it hasn't already been defined. By default
+ * * is defined to be a near pointer. MPI2_POINTER can be defined as
+ * a far pointer by defining * as "far *" before this header file is
+ * included.
+ */
+
+/* the basic types may have already been included by mpi_type.h */
+#ifndef MPI_TYPE_H
+/*****************************************************************************
+*
+*               Basic Types
+*
+*****************************************************************************/
+
+typedef u8 U8;
+typedef __le16 U16;
+typedef __le32 U32;
+typedef __le64 U64 __attribute__ ((aligned(4)));
+
+/*****************************************************************************
+*
+*               Pointer Types
+*
+*****************************************************************************/
+
+typedef U8 *PU8;
+typedef U16 *PU16;
+typedef U32 *PU32;
+typedef U64 *PU64;
+
+#endif
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
new file mode 100644
index 0000000..04f8010
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -0,0 +1,4840 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/time.h>
+#include <linux/kthread.h>
+#include <linux/aer.h>
+
+
+#include "mpt3sas_base.h"
+
+static MPT_CALLBACK	mpt_callbacks[MPT_MAX_CALLBACKS];
+
+
+#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
+
+ /* maximum controller queue depth */
+#define MAX_HBA_QUEUE_DEPTH	30000
+#define MAX_CHAIN_DEPTH		100000
+static int max_queue_depth = -1;
+module_param(max_queue_depth, int, 0);
+MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
+
+static int max_sgl_entries = -1;
+module_param(max_sgl_entries, int, 0);
+MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
+
+static int msix_disable = -1;
+module_param(msix_disable, int, 0);
+MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
+
+
+static int mpt3sas_fwfault_debug;
+MODULE_PARM_DESC(mpt3sas_fwfault_debug,
+	" enable detection of firmware fault and halt firmware - (default=0)");
+
+
+/**
+ * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
+ *
+ */
+static int
+_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (ret)
+		return ret;
+
+	pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+		ioc->fwfault_debug = mpt3sas_fwfault_debug;
+	return 0;
+}
+module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
+	param_get_int, &mpt3sas_fwfault_debug, 0644);
+
+/**
+ *  mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt3sas_remove_dead_ioc_func(void *arg)
+{
+	struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
+	struct pci_dev *pdev;
+
+	if ((ioc == NULL))
+		return -1;
+
+	pdev = ioc->pdev;
+	if ((pdev == NULL))
+		return -1;
+	pci_stop_and_remove_bus_device(pdev);
+	return 0;
+}
+
+/**
+ * _base_fault_reset_work - workq handling ioc fault conditions
+ * @work: input argument, used to derive ioc
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+static void
+_base_fault_reset_work(struct work_struct *work)
+{
+	struct MPT3SAS_ADAPTER *ioc =
+	    container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
+	unsigned long	 flags;
+	u32 doorbell;
+	int rc;
+	struct task_struct *p;
+
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->shost_recovery)
+		goto rearm_timer;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+	doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
+		pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
+		    ioc->name);
+
+		/*
+		 * Call _scsih_flush_pending_cmds callback so that we flush all
+		 * pending commands back to OS. This call is required to aovid
+		 * deadlock at block layer. Dead IOC will fail to do diag reset,
+		 * and this call is safe since dead ioc will never return any
+		 * command back from HW.
+		 */
+		ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+		/*
+		 * Set remove_host flag early since kernel thread will
+		 * take some time to execute.
+		 */
+		ioc->remove_host = 1;
+		/*Remove the Dead Host */
+		p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
+		    "mpt3sas_dead_ioc_%d", ioc->id);
+		if (IS_ERR(p))
+			pr_err(MPT3SAS_FMT
+			"%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
+			ioc->name, __func__);
+		else
+			pr_err(MPT3SAS_FMT
+			"%s: Running mpt3sas_dead_ioc thread success !!!!\n",
+			ioc->name, __func__);
+		return; /* don't rearm timer */
+	}
+
+	if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
+		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+		pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
+		    __func__, (rc == 0) ? "success" : "failed");
+		doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+		if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+			mpt3sas_base_fault_info(ioc, doorbell &
+			    MPI2_DOORBELL_DATA_MASK);
+		if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
+		    MPI2_IOC_STATE_OPERATIONAL)
+			return; /* don't rearm timer */
+	}
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ rearm_timer:
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: per adapter object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	if (ioc->fault_reset_work_q)
+		return;
+
+	/* initialize fault polling */
+
+	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+	snprintf(ioc->fault_reset_work_q_name,
+	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+	ioc->fault_reset_work_q =
+		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+	if (!ioc->fault_reset_work_q) {
+		pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+			return;
+	}
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: per adapter object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long flags;
+	struct workqueue_struct *wq;
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	wq = ioc->fault_reset_work_q;
+	ioc->fault_reset_work_q = NULL;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (wq) {
+		if (!cancel_delayed_work(&ioc->fault_reset_work))
+			flush_workqueue(wq);
+		destroy_workqueue(wq);
+	}
+}
+
+/**
+ * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code)
+{
+	pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n",
+	    ioc->name, fault_code);
+}
+
+/**
+ * mpt3sas_halt_firmware - halt's mpt controller firmware
+ * @ioc: per adapter object
+ *
+ * For debugging timeout related issues.  Writing 0xCOFFEE00
+ * to the doorbell register will halt controller firmware. With
+ * the purpose to stop both driver and firmware, the enduser can
+ * obtain a ring buffer from controller UART.
+ */
+void
+mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 doorbell;
+
+	if (!ioc->fwfault_debug)
+		return;
+
+	dump_stack();
+
+	doorbell = readl(&ioc->chip->Doorbell);
+	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+		mpt3sas_base_fault_info(ioc , doorbell);
+	else {
+		writel(0xC0FFEE00, &ioc->chip->Doorbell);
+		pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n",
+			ioc->name);
+	}
+
+	if (ioc->fwfault_debug == 2)
+		for (;;)
+			;
+	else
+		panic("panic in %s\n", __func__);
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _base_sas_ioc_info - verbose translation of the ioc status
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @request_hdr: request mf
+ *
+ * Return nothing.
+ */
+static void
+_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
+	MPI2RequestHeader_t *request_hdr)
+{
+	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	char *desc = NULL;
+	u16 frame_sz;
+	char *func_str = NULL;
+
+	/* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
+	if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+	    request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
+		return;
+
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return;
+
+	switch (ioc_status) {
+
+/****************************************************************************
+*  Common IOCStatus values for all replies
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+		desc = "invalid function";
+		break;
+	case MPI2_IOCSTATUS_BUSY:
+		desc = "busy";
+		break;
+	case MPI2_IOCSTATUS_INVALID_SGL:
+		desc = "invalid sgl";
+		break;
+	case MPI2_IOCSTATUS_INTERNAL_ERROR:
+		desc = "internal error";
+		break;
+	case MPI2_IOCSTATUS_INVALID_VPID:
+		desc = "invalid vpid";
+		break;
+	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		desc = "insufficient resources";
+		break;
+	case MPI2_IOCSTATUS_INVALID_FIELD:
+		desc = "invalid field";
+		break;
+	case MPI2_IOCSTATUS_INVALID_STATE:
+		desc = "invalid state";
+		break;
+	case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
+		desc = "op state not supported";
+		break;
+
+/****************************************************************************
+*  Config IOCStatus values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
+		desc = "config invalid action";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
+		desc = "config invalid type";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
+		desc = "config invalid page";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
+		desc = "config invalid data";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
+		desc = "config no defaults";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
+		desc = "config cant commit";
+		break;
+
+/****************************************************************************
+*  SCSI IO Reply
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		break;
+
+/****************************************************************************
+*  For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc = "eedp app tag error";
+		break;
+
+/****************************************************************************
+*  SCSI Target values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
+		desc = "target invalid io index";
+		break;
+	case MPI2_IOCSTATUS_TARGET_ABORTED:
+		desc = "target aborted";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
+		desc = "target no conn retryable";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
+		desc = "target no connection";
+		break;
+	case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
+		desc = "target xfer count mismatch";
+		break;
+	case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
+		desc = "target data offset error";
+		break;
+	case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
+		desc = "target too much write data";
+		break;
+	case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
+		desc = "target iu too short";
+		break;
+	case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
+		desc = "target ack nak timeout";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
+		desc = "target nak received";
+		break;
+
+/****************************************************************************
+*  Serial Attached SCSI values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
+		desc = "smp request failed";
+		break;
+	case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
+		desc = "smp data overrun";
+		break;
+
+/****************************************************************************
+*  Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
+		desc = "diagnostic released";
+		break;
+	default:
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	switch (request_hdr->Function) {
+	case MPI2_FUNCTION_CONFIG:
+		frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
+		func_str = "config_page";
+		break;
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+		frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
+		func_str = "task_mgmt";
+		break;
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+		frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
+		func_str = "sas_iounit_ctl";
+		break;
+	case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
+		frame_sz = sizeof(Mpi2SepRequest_t);
+		func_str = "enclosure";
+		break;
+	case MPI2_FUNCTION_IOC_INIT:
+		frame_sz = sizeof(Mpi2IOCInitRequest_t);
+		func_str = "ioc_init";
+		break;
+	case MPI2_FUNCTION_PORT_ENABLE:
+		frame_sz = sizeof(Mpi2PortEnableRequest_t);
+		func_str = "port_enable";
+		break;
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+		frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
+		func_str = "smp_passthru";
+		break;
+	default:
+		frame_sz = 32;
+		func_str = "unknown";
+		break;
+	}
+
+	pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
+		ioc->name, desc, ioc_status, request_hdr, func_str);
+
+	_debug_dump_mf(request_hdr, frame_sz/4);
+}
+
+/**
+ * _base_display_event_data - verbose translation of firmware asyn events
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ *
+ * Return nothing.
+ */
+static void
+_base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply)
+{
+	char *desc = NULL;
+	u16 event;
+
+	if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
+		return;
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	switch (event) {
+	case MPI2_EVENT_LOG_DATA:
+		desc = "Log Data";
+		break;
+	case MPI2_EVENT_STATE_CHANGE:
+		desc = "Status Change";
+		break;
+	case MPI2_EVENT_HARD_RESET_RECEIVED:
+		desc = "Hard Reset Received";
+		break;
+	case MPI2_EVENT_EVENT_CHANGE:
+		desc = "Event Change";
+		break;
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		desc = "Device Status Change";
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+		desc = "IR Operation Status";
+		break;
+	case MPI2_EVENT_SAS_DISCOVERY:
+	{
+		Mpi2EventDataSasDiscovery_t *event_data =
+		    (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
+		pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name,
+		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+		    "start" : "stop");
+		if (event_data->DiscoveryStatus)
+			pr_info("discovery_status(0x%08x)",
+			    le32_to_cpu(event_data->DiscoveryStatus));
+			pr_info("\n");
+		return;
+	}
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+		desc = "SAS Broadcast Primitive";
+		break;
+	case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+		desc = "SAS Init Device Status Change";
+		break;
+	case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
+		desc = "SAS Init Table Overflow";
+		break;
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		desc = "SAS Topology Change List";
+		break;
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+		desc = "SAS Enclosure Device Status Change";
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		desc = "IR Volume";
+		break;
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		desc = "IR Physical Disk";
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		desc = "IR Configuration Change List";
+		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+		desc = "Log Entry Added";
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
+}
+#endif
+
+/**
+ * _base_sas_log_info - verbose translation of firmware log info
+ * @ioc: per adapter object
+ * @log_info: log info
+ *
+ * Return nothing.
+ */
+static void
+_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
+{
+	union loginfo_type {
+		u32	loginfo;
+		struct {
+			u32	subcode:16;
+			u32	code:8;
+			u32	originator:4;
+			u32	bus_type:4;
+		} dw;
+	};
+	union loginfo_type sas_loginfo;
+	char *originator_str = NULL;
+
+	sas_loginfo.loginfo = log_info;
+	if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
+		return;
+
+	/* each nexus loss loginfo */
+	if (log_info == 0x31170000)
+		return;
+
+	/* eat the loginfos associated with task aborts */
+	if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
+	    0x31140000 || log_info == 0x31130000))
+		return;
+
+	switch (sas_loginfo.dw.originator) {
+	case 0:
+		originator_str = "IOP";
+		break;
+	case 1:
+		originator_str = "PL";
+		break;
+	case 2:
+		originator_str = "IR";
+		break;
+	}
+
+	pr_warn(MPT3SAS_FMT
+		"log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
+		ioc->name, log_info,
+	     originator_str, sas_loginfo.dw.code,
+	     sas_loginfo.dw.subcode);
+}
+
+/**
+ * _base_display_reply_info -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return nothing.
+ */
+static void
+_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	u16 ioc_status;
+	u32 loginfo = 0;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
+	    (ioc->logging_level & MPT_DEBUG_REPLY)) {
+		_base_sas_ioc_info(ioc , mpi_reply,
+		   mpt3sas_base_get_msg_frame(ioc, smid));
+	}
+#endif
+	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+		loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
+		_base_sas_log_info(ioc, loginfo);
+	}
+
+	if (ioc_status || loginfo) {
+		ioc_status &= MPI2_IOCSTATUS_MASK;
+		mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
+	}
+}
+
+/**
+ * mpt3sas_base_done - base internal command completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+		return 1;
+
+	if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+
+	ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
+		memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+	}
+	ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
+
+	complete(&ioc->base_cmds.done);
+	return 1;
+}
+
+/**
+ * _base_async_event - main callback handler for firmware asyn events
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+	Mpi2EventAckRequest_t *ack_request;
+	u16 smid;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (!mpi_reply)
+		return 1;
+	if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
+		return 1;
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	_base_display_event_data(ioc, mpi_reply);
+#endif
+	if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
+		goto out;
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+
+	ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+	ack_request->Event = mpi_reply->Event;
+	ack_request->EventContext = mpi_reply->EventContext;
+	ack_request->VF_ID = 0;  /* TODO */
+	ack_request->VP_ID = 0;
+	mpt3sas_base_put_smid_default(ioc, smid);
+
+ out:
+
+	/* scsih callback handler */
+	mpt3sas_scsih_event_callback(ioc, msix_index, reply);
+
+	/* ctl callback handler */
+	mpt3sas_ctl_event_callback(ioc, msix_index, reply);
+
+	return 1;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	int i;
+	u8 cb_idx;
+
+	if (smid < ioc->hi_priority_smid) {
+		i = smid - 1;
+		cb_idx = ioc->scsi_lookup[i].cb_idx;
+	} else if (smid < ioc->internal_smid) {
+		i = smid - ioc->hi_priority_smid;
+		cb_idx = ioc->hpr_lookup[i].cb_idx;
+	} else if (smid <= ioc->hba_queue_depth) {
+		i = smid - ioc->internal_smid;
+		cb_idx = ioc->internal_lookup[i].cb_idx;
+	} else
+		cb_idx = 0xFF;
+	return cb_idx;
+}
+
+/**
+ * _base_mask_interrupts - disable interrupts
+ * @ioc: per adapter object
+ *
+ * Disabling ResetIRQ, Reply and Doorbell Interrupts
+ *
+ * Return nothing.
+ */
+static void
+_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 him_register;
+
+	ioc->mask_interrupts = 1;
+	him_register = readl(&ioc->chip->HostInterruptMask);
+	him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
+	writel(him_register, &ioc->chip->HostInterruptMask);
+	readl(&ioc->chip->HostInterruptMask);
+}
+
+/**
+ * _base_unmask_interrupts - enable interrupts
+ * @ioc: per adapter object
+ *
+ * Enabling only Reply Interrupts
+ *
+ * Return nothing.
+ */
+static void
+_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 him_register;
+
+	him_register = readl(&ioc->chip->HostInterruptMask);
+	him_register &= ~MPI2_HIM_RIM;
+	writel(him_register, &ioc->chip->HostInterruptMask);
+	ioc->mask_interrupts = 0;
+}
+
+union reply_descriptor {
+	u64 word;
+	struct {
+		u32 low;
+		u32 high;
+	} u;
+};
+
+/**
+ * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ * @r: pt_regs pointer (not used)
+ *
+ * Return IRQ_HANDLE if processed, else IRQ_NONE.
+ */
+static irqreturn_t
+_base_interrupt(int irq, void *bus_id)
+{
+	struct adapter_reply_queue *reply_q = bus_id;
+	union reply_descriptor rd;
+	u32 completed_cmds;
+	u8 request_desript_type;
+	u16 smid;
+	u8 cb_idx;
+	u32 reply;
+	u8 msix_index = reply_q->msix_index;
+	struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
+	Mpi2ReplyDescriptorsUnion_t *rpf;
+	u8 rc;
+
+	if (ioc->mask_interrupts)
+		return IRQ_NONE;
+
+	if (!atomic_add_unless(&reply_q->busy, 1, 1))
+		return IRQ_NONE;
+
+	rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
+	request_desript_type = rpf->Default.ReplyFlags
+	     & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+	if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
+		atomic_dec(&reply_q->busy);
+		return IRQ_NONE;
+	}
+
+	completed_cmds = 0;
+	cb_idx = 0xFF;
+	do {
+		rd.word = le64_to_cpu(rpf->Words);
+		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
+			goto out;
+		reply = 0;
+		smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
+		if (request_desript_type ==
+		    MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
+		    request_desript_type ==
+		    MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+			cb_idx = _base_get_cb_idx(ioc, smid);
+			if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+			    (likely(mpt_callbacks[cb_idx] != NULL))) {
+				rc = mpt_callbacks[cb_idx](ioc, smid,
+				    msix_index, 0);
+				if (rc)
+					mpt3sas_base_free_smid(ioc, smid);
+			}
+		} else if (request_desript_type ==
+		    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
+			reply = le32_to_cpu(
+			    rpf->AddressReply.ReplyFrameAddress);
+			if (reply > ioc->reply_dma_max_address ||
+			    reply < ioc->reply_dma_min_address)
+				reply = 0;
+			if (smid) {
+				cb_idx = _base_get_cb_idx(ioc, smid);
+				if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+				    (likely(mpt_callbacks[cb_idx] != NULL))) {
+					rc = mpt_callbacks[cb_idx](ioc, smid,
+					    msix_index, reply);
+					if (reply)
+						_base_display_reply_info(ioc,
+						    smid, msix_index, reply);
+					if (rc)
+						mpt3sas_base_free_smid(ioc,
+						    smid);
+				}
+			} else {
+				_base_async_event(ioc, msix_index, reply);
+			}
+
+			/* reply free queue handling */
+			if (reply) {
+				ioc->reply_free_host_index =
+				    (ioc->reply_free_host_index ==
+				    (ioc->reply_free_queue_depth - 1)) ?
+				    0 : ioc->reply_free_host_index + 1;
+				ioc->reply_free[ioc->reply_free_host_index] =
+				    cpu_to_le32(reply);
+				wmb();
+				writel(ioc->reply_free_host_index,
+				    &ioc->chip->ReplyFreeHostIndex);
+			}
+		}
+
+		rpf->Words = cpu_to_le64(ULLONG_MAX);
+		reply_q->reply_post_host_index =
+		    (reply_q->reply_post_host_index ==
+		    (ioc->reply_post_queue_depth - 1)) ? 0 :
+		    reply_q->reply_post_host_index + 1;
+		request_desript_type =
+		    reply_q->reply_post_free[reply_q->reply_post_host_index].
+		    Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+		completed_cmds++;
+		if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+			goto out;
+		if (!reply_q->reply_post_host_index)
+			rpf = reply_q->reply_post_free;
+		else
+			rpf++;
+	} while (1);
+
+ out:
+
+	if (!completed_cmds) {
+		atomic_dec(&reply_q->busy);
+		return IRQ_NONE;
+	}
+
+	wmb();
+	writel(reply_q->reply_post_host_index | (msix_index <<
+	    MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
+	atomic_dec(&reply_q->busy);
+	return IRQ_HANDLED;
+}
+
+/**
+ * _base_is_controller_msix_enabled - is controller support muli-reply queues
+ * @ioc: per adapter object
+ *
+ */
+static inline int
+_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
+{
+	return (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
+}
+
+/**
+ * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues
+ * @ioc: per adapter object
+ * Context: ISR conext
+ *
+ * Called when a Task Management request has completed. We want
+ * to flush the other reply queues so all the outstanding IO has been
+ * completed back to OS before we process the TM completetion.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct adapter_reply_queue *reply_q;
+
+	/* If MSIX capability is turned off
+	 * then multi-queues are not enabled
+	 */
+	if (!_base_is_controller_msix_enabled(ioc))
+		return;
+
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		if (ioc->shost_recovery)
+			return;
+		/* TMs are on msix_index == 0 */
+		if (reply_q->msix_index == 0)
+			continue;
+		_base_interrupt(reply_q->vector, (void *)reply_q);
+	}
+}
+
+/**
+ * mpt3sas_base_release_callback_handler - clear interrupt callback handler
+ * @cb_idx: callback index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_release_callback_handler(u8 cb_idx)
+{
+	mpt_callbacks[cb_idx] = NULL;
+}
+
+/**
+ * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
+ * @cb_func: callback function
+ *
+ * Returns cb_func.
+ */
+u8
+mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
+{
+	u8 cb_idx;
+
+	for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
+		if (mpt_callbacks[cb_idx] == NULL)
+			break;
+
+	mpt_callbacks[cb_idx] = cb_func;
+	return cb_idx;
+}
+
+/**
+ * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_initialize_callback_handler(void)
+{
+	u8 cb_idx;
+
+	for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
+		mpt3sas_base_release_callback_handler(cb_idx);
+}
+
+
+/**
+ * _base_build_zero_len_sge - build zero length sg entry
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ *
+ * Return nothing.
+ */
+static void
+_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+	u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
+	    MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
+	    MPI2_SGE_FLAGS_SHIFT);
+	ioc->base_add_sg_single(paddr, flags_length, -1);
+}
+
+/**
+ * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+	Mpi2SGESimple32_t *sgel = paddr;
+
+	flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
+	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+	sgel->FlagsLength = cpu_to_le32(flags_length);
+	sgel->Address = cpu_to_le32(dma_addr);
+}
+
+
+/**
+ * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+	Mpi2SGESimple64_t *sgel = paddr;
+
+	flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
+	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+	sgel->FlagsLength = cpu_to_le32(flags_length);
+	sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_get_chain_buffer_tracker - obtain chain tracker
+ * @ioc: per adapter object
+ * @smid: smid associated to an IO request
+ *
+ * Returns chain tracker(from ioc->free_chain_list)
+ */
+static struct chain_tracker *
+_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct chain_tracker *chain_req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->free_chain_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			"chain buffers not available\n", ioc->name));
+		return NULL;
+	}
+	chain_req = list_entry(ioc->free_chain_list.next,
+	    struct chain_tracker, tracker_list);
+	list_del_init(&chain_req->tracker_list);
+	list_add_tail(&chain_req->tracker_list,
+	    &ioc->scsi_lookup[smid - 1].chain_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return chain_req;
+}
+
+
+/**
+ * _base_build_sg - build generic sg
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * Return nothing.
+ */
+static void
+_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz)
+{
+	u32 sgl_flags;
+
+	if (!data_out_sz && !data_in_sz) {
+		_base_build_zero_len_sge(ioc, psge);
+		return;
+	}
+
+	if (data_out_sz && data_in_sz) {
+		/* WRITE sgel first */
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_out_sz, data_out_dma);
+
+		/* incr sgel */
+		psge += ioc->sge_size;
+
+		/* READ sgel last */
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_in_sz, data_in_dma);
+	} else if (data_out_sz) /* WRITE */ {
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_out_sz, data_out_dma);
+	} else if (data_in_sz) /* READ */ {
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_in_sz, data_in_dma);
+	}
+}
+
+/* IEEE format sgls */
+
+/**
+ * _base_add_sg_single_ieee - add sg element for IEEE format
+ * @paddr: virtual address for SGE
+ * @flags: SGE flags
+ * @chain_offset: number of 128 byte elements from start of segment
+ * @length: data transfer length
+ * @dma_addr: Physical address
+ *
+ * Return nothing.
+ */
+static void
+_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
+	dma_addr_t dma_addr)
+{
+	Mpi25IeeeSgeChain64_t *sgel = paddr;
+
+	sgel->Flags = flags;
+	sgel->NextChainOffset = chain_offset;
+	sgel->Length = cpu_to_le32(length);
+	sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ *
+ * Return nothing.
+ */
+static void
+_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+	u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+		MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
+	_base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
+}
+
+/**
+ * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd, u16 smid)
+{
+	Mpi2SCSIIORequest_t *mpi_request;
+	dma_addr_t chain_dma;
+	struct scatterlist *sg_scmd;
+	void *sg_local, *chain;
+	u32 chain_offset;
+	u32 chain_length;
+	u32 chain_flags;
+	int sges_left;
+	u32 sges_in_segment;
+	u8 simple_sgl_flags;
+	u8 simple_sgl_flags_last;
+	u8 chain_sgl_flags;
+	struct chain_tracker *chain_req;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	/* init scatter gather flags */
+	simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+	simple_sgl_flags_last = simple_sgl_flags |
+	    MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+	chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+	    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+
+	sg_scmd = scsi_sglist(scmd);
+	sges_left = scsi_dma_map(scmd);
+	if (!sges_left) {
+		sdev_printk(KERN_ERR, scmd->device,
+			"pci_map_sg failed: request for %d bytes!\n",
+			scsi_bufflen(scmd));
+		return -ENOMEM;
+	}
+
+	sg_local = &mpi_request->SGL;
+	sges_in_segment = (ioc->request_sz -
+	    offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+	if (sges_left <= sges_in_segment)
+		goto fill_in_last_segment;
+
+	mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
+	    (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+
+	/* fill in main message segment when there is a chain following */
+	while (sges_in_segment > 1) {
+		_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+		    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size_ieee;
+		sges_left--;
+		sges_in_segment--;
+	}
+
+	/* initializing the chain flags and pointers */
+	chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+	chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+	if (!chain_req)
+		return -1;
+	chain = chain_req->chain_buffer;
+	chain_dma = chain_req->chain_buffer_dma;
+	do {
+		sges_in_segment = (sges_left <=
+		    ioc->max_sges_in_chain_message) ? sges_left :
+		    ioc->max_sges_in_chain_message;
+		chain_offset = (sges_left == sges_in_segment) ?
+		    0 : sges_in_segment;
+		chain_length = sges_in_segment * ioc->sge_size_ieee;
+		if (chain_offset)
+			chain_length += ioc->sge_size_ieee;
+		_base_add_sg_single_ieee(sg_local, chain_sgl_flags,
+		    chain_offset, chain_length, chain_dma);
+
+		sg_local = chain;
+		if (!chain_offset)
+			goto fill_in_last_segment;
+
+		/* fill in chain segments */
+		while (sges_in_segment) {
+			_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+			sg_scmd = sg_next(sg_scmd);
+			sg_local += ioc->sge_size_ieee;
+			sges_left--;
+			sges_in_segment--;
+		}
+
+		chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+		if (!chain_req)
+			return -1;
+		chain = chain_req->chain_buffer;
+		chain_dma = chain_req->chain_buffer_dma;
+	} while (1);
+
+
+ fill_in_last_segment:
+
+	/* fill the last segment */
+	while (sges_left) {
+		if (sges_left == 1)
+			_base_add_sg_single_ieee(sg_local,
+			    simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
+			    sg_dma_address(sg_scmd));
+		else
+			_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size_ieee;
+		sges_left--;
+	}
+
+	return 0;
+}
+
+/**
+ * _base_build_sg_ieee - build generic sg for IEEE format
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * Return nothing.
+ */
+static void
+_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz)
+{
+	u8 sgl_flags;
+
+	if (!data_out_sz && !data_in_sz) {
+		_base_build_zero_len_sge_ieee(ioc, psge);
+		return;
+	}
+
+	if (data_out_sz && data_in_sz) {
+		/* WRITE sgel first */
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+		    data_out_dma);
+
+		/* incr sgel */
+		psge += ioc->sge_size_ieee;
+
+		/* READ sgel last */
+		sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+		    data_in_dma);
+	} else if (data_out_sz) /* WRITE */ {
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+		    data_out_dma);
+	} else if (data_in_sz) /* READ */ {
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+		    data_in_dma);
+	}
+}
+
+#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
+
+/**
+ * _base_config_dma_addressing - set dma addressing
+ * @ioc: per adapter object
+ * @pdev: PCI device struct
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
+{
+	struct sysinfo s;
+	char *desc = NULL;
+
+	if (sizeof(dma_addr_t) > 4) {
+		const uint64_t required_mask =
+		    dma_get_required_mask(&pdev->dev);
+		if ((required_mask > DMA_BIT_MASK(32)) &&
+		    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+		    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+			ioc->base_add_sg_single = &_base_add_sg_single_64;
+			ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+			desc = "64";
+			goto out;
+		}
+	}
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		ioc->base_add_sg_single = &_base_add_sg_single_32;
+		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+		desc = "32";
+	} else
+		return -ENODEV;
+
+ out:
+	si_meminfo(&s);
+	pr_info(MPT3SAS_FMT
+		"%s BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+		ioc->name, desc, convert_to_kb(s.totalram));
+
+	return 0;
+}
+
+/**
+ * _base_check_enable_msix - checks MSIX capabable.
+ * @ioc: per adapter object
+ *
+ * Check to see if card is capable of MSIX, and set number
+ * of available msix vectors
+ */
+static int
+_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	int base;
+	u16 message_control;
+
+	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
+	if (!base) {
+		dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
+			ioc->name));
+		return -EINVAL;
+	}
+
+	/* get msix vector count */
+
+	pci_read_config_word(ioc->pdev, base + 2, &message_control);
+	ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+	if (ioc->msix_vector_count > 8)
+		ioc->msix_vector_count = 8;
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"msix is supported, vector_count(%d)\n",
+		ioc->name, ioc->msix_vector_count));
+	return 0;
+}
+
+/**
+ * _base_free_irq - free irq
+ * @ioc: per adapter object
+ *
+ * Freeing respective reply_queue from the list.
+ */
+static void
+_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct adapter_reply_queue *reply_q, *next;
+
+	if (list_empty(&ioc->reply_queue_list))
+		return;
+
+	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+		list_del(&reply_q->list);
+		synchronize_irq(reply_q->vector);
+		free_irq(reply_q->vector, reply_q);
+		kfree(reply_q);
+	}
+}
+
+/**
+ * _base_request_irq - request irq
+ * @ioc: per adapter object
+ * @index: msix index into vector table
+ * @vector: irq vector
+ *
+ * Inserting respective reply_queue into the list.
+ */
+static int
+_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
+{
+	struct adapter_reply_queue *reply_q;
+	int r;
+
+	reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
+	if (!reply_q) {
+		pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n",
+		    ioc->name, (int)sizeof(struct adapter_reply_queue));
+		return -ENOMEM;
+	}
+	reply_q->ioc = ioc;
+	reply_q->msix_index = index;
+	reply_q->vector = vector;
+	atomic_set(&reply_q->busy, 0);
+	if (ioc->msix_enable)
+		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
+		    MPT3SAS_DRIVER_NAME, ioc->id, index);
+	else
+		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
+		    MPT3SAS_DRIVER_NAME, ioc->id);
+	r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
+	    reply_q);
+	if (r) {
+		pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n",
+		    reply_q->name, vector);
+		kfree(reply_q);
+		return -EBUSY;
+	}
+
+	INIT_LIST_HEAD(&reply_q->list);
+	list_add_tail(&reply_q->list, &ioc->reply_queue_list);
+	return 0;
+}
+
+/**
+ * _base_assign_reply_queues - assigning msix index for each cpu
+ * @ioc: per adapter object
+ *
+ * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
+ *
+ * It would nice if we could call irq_set_affinity, however it is not
+ * an exported symbol
+ */
+static void
+_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct adapter_reply_queue *reply_q;
+	int cpu_id;
+	int cpu_grouping, loop, grouping, grouping_mod;
+	int reply_queue;
+
+	if (!_base_is_controller_msix_enabled(ioc))
+		return;
+
+	memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
+
+	/* NUMA Hardware bug workaround - drop to less reply queues */
+	if (ioc->reply_queue_count > ioc->facts.MaxMSIxVectors) {
+		ioc->reply_queue_count = ioc->facts.MaxMSIxVectors;
+		reply_queue = 0;
+		list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+			reply_q->msix_index = reply_queue;
+			if (++reply_queue == ioc->reply_queue_count)
+				reply_queue = 0;
+		}
+	}
+
+	/* when there are more cpus than available msix vectors,
+	 * then group cpus togeather on same irq
+	 */
+	if (ioc->cpu_count > ioc->msix_vector_count) {
+		grouping = ioc->cpu_count / ioc->msix_vector_count;
+		grouping_mod = ioc->cpu_count % ioc->msix_vector_count;
+		if (grouping < 2 || (grouping == 2 && !grouping_mod))
+			cpu_grouping = 2;
+		else if (grouping < 4 || (grouping == 4 && !grouping_mod))
+			cpu_grouping = 4;
+		else if (grouping < 8 || (grouping == 8 && !grouping_mod))
+			cpu_grouping = 8;
+		else
+			cpu_grouping = 16;
+	} else
+		cpu_grouping = 0;
+
+	loop = 0;
+	reply_q = list_entry(ioc->reply_queue_list.next,
+	     struct adapter_reply_queue, list);
+	for_each_online_cpu(cpu_id) {
+		if (!cpu_grouping) {
+			ioc->cpu_msix_table[cpu_id] = reply_q->msix_index;
+			reply_q = list_entry(reply_q->list.next,
+			    struct adapter_reply_queue, list);
+		} else {
+			if (loop < cpu_grouping) {
+				ioc->cpu_msix_table[cpu_id] =
+				    reply_q->msix_index;
+				loop++;
+			} else {
+				reply_q = list_entry(reply_q->list.next,
+				    struct adapter_reply_queue, list);
+				ioc->cpu_msix_table[cpu_id] =
+				    reply_q->msix_index;
+				loop = 1;
+			}
+		}
+	}
+}
+
+/**
+ * _base_disable_msix - disables msix
+ * @ioc: per adapter object
+ *
+ */
+static void
+_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	if (!ioc->msix_enable)
+		return;
+	pci_disable_msix(ioc->pdev);
+	ioc->msix_enable = 0;
+}
+
+/**
+ * _base_enable_msix - enables msix, failback to io_apic
+ * @ioc: per adapter object
+ *
+ */
+static int
+_base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct msix_entry *entries, *a;
+	int r;
+	int i;
+	u8 try_msix = 0;
+
+	INIT_LIST_HEAD(&ioc->reply_queue_list);
+
+	if (msix_disable == -1 || msix_disable == 0)
+		try_msix = 1;
+
+	if (!try_msix)
+		goto try_ioapic;
+
+	if (_base_check_enable_msix(ioc) != 0)
+		goto try_ioapic;
+
+	ioc->reply_queue_count = min_t(int, ioc->cpu_count,
+	    ioc->msix_vector_count);
+
+	entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
+	    GFP_KERNEL);
+	if (!entries) {
+		dfailprintk(ioc, pr_info(MPT3SAS_FMT
+			"kcalloc failed @ at %s:%d/%s() !!!\n",
+			ioc->name, __FILE__, __LINE__, __func__));
+		goto try_ioapic;
+	}
+
+	for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
+		a->entry = i;
+
+	r = pci_enable_msix(ioc->pdev, entries, ioc->reply_queue_count);
+	if (r) {
+		dfailprintk(ioc, pr_info(MPT3SAS_FMT
+			"pci_enable_msix failed (r=%d) !!!\n",
+			ioc->name, r));
+		kfree(entries);
+		goto try_ioapic;
+	}
+
+	ioc->msix_enable = 1;
+	for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
+		r = _base_request_irq(ioc, i, a->vector);
+		if (r) {
+			_base_free_irq(ioc);
+			_base_disable_msix(ioc);
+			kfree(entries);
+			goto try_ioapic;
+		}
+	}
+
+	kfree(entries);
+	return 0;
+
+/* failback to io_apic interrupt routing */
+ try_ioapic:
+
+	r = _base_request_irq(ioc, 0, ioc->pdev->irq);
+
+	return r;
+}
+
+/**
+ * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct pci_dev *pdev = ioc->pdev;
+	u32 memap_sz;
+	u32 pio_sz;
+	int i, r = 0;
+	u64 pio_chip = 0;
+	u64 chip_phys = 0;
+	struct adapter_reply_queue *reply_q;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n",
+	    ioc->name, __func__));
+
+	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	if (pci_enable_device_mem(pdev)) {
+		pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
+			ioc->name);
+		return -ENODEV;
+	}
+
+
+	if (pci_request_selected_regions(pdev, ioc->bars,
+	    MPT3SAS_DRIVER_NAME)) {
+		pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
+			ioc->name);
+		r = -ENODEV;
+		goto out_fail;
+	}
+
+/* AER (Advanced Error Reporting) hooks */
+	pci_enable_pcie_error_reporting(pdev);
+
+	pci_set_master(pdev);
+
+
+	if (_base_config_dma_addressing(ioc, pdev) != 0) {
+		pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n",
+		    ioc->name, pci_name(pdev));
+		r = -ENODEV;
+		goto out_fail;
+	}
+
+	for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
+		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+			if (pio_sz)
+				continue;
+			pio_chip = (u64)pci_resource_start(pdev, i);
+			pio_sz = pci_resource_len(pdev, i);
+		} else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+			if (memap_sz)
+				continue;
+			ioc->chip_phys = pci_resource_start(pdev, i);
+			chip_phys = (u64)ioc->chip_phys;
+			memap_sz = pci_resource_len(pdev, i);
+			ioc->chip = ioremap(ioc->chip_phys, memap_sz);
+			if (ioc->chip == NULL) {
+				pr_err(MPT3SAS_FMT "unable to map adapter memory!\n",
+					ioc->name);
+				r = -EINVAL;
+				goto out_fail;
+			}
+		}
+	}
+
+	_base_mask_interrupts(ioc);
+	r = _base_enable_msix(ioc);
+	if (r)
+		goto out_fail;
+
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
+		pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
+		    reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
+		    "IO-APIC enabled"), reply_q->vector);
+
+	pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
+	    ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
+	pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n",
+	    ioc->name, (unsigned long long)pio_chip, pio_sz);
+
+	/* Save PCI configuration state for recovery from PCI AER/EEH errors */
+	pci_save_state(pdev);
+	return 0;
+
+ out_fail:
+	if (ioc->chip_phys)
+		iounmap(ioc->chip);
+	ioc->chip_phys = 0;
+	pci_release_selected_regions(ioc->pdev, ioc->bars);
+	pci_disable_pcie_error_reporting(pdev);
+	pci_disable_device(pdev);
+	return r;
+}
+
+/**
+ * mpt3sas_base_get_msg_frame - obtain request mf pointer
+ * @ioc: per adapter object
+ * @smid: system request message index(smid zero is invalid)
+ *
+ * Returns virt pointer to message frame.
+ */
+void *
+mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return (void *)(ioc->request + (smid * ioc->request_sz));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns virt pointer to sense buffer.
+ */
+void *
+mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns phys pointer to the low 32bit address of the sense buffer.
+ */
+__le32
+mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
+	    SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
+ * @ioc: per adapter object
+ * @phys_addr: lower 32 physical addr of the reply
+ *
+ * Converts 32bit lower physical addr into a virt address.
+ */
+void *
+mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
+{
+	if (!phys_addr)
+		return NULL;
+	return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
+}
+
+/**
+ * mpt3sas_base_get_smid - obtain a free smid from internal queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->internal_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		pr_err(MPT3SAS_FMT "%s: smid not available\n",
+		    ioc->name, __func__);
+		return 0;
+	}
+
+	request = list_entry(ioc->internal_free_list.next,
+	    struct request_tracker, tracker_list);
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+	struct scsi_cmnd *scmd)
+{
+	unsigned long flags;
+	struct scsiio_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		pr_err(MPT3SAS_FMT "%s: smid not available\n",
+		    ioc->name, __func__);
+		return 0;
+	}
+
+	request = list_entry(ioc->free_list.next,
+	    struct scsiio_tracker, tracker_list);
+	request->scmd = scmd;
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->hpr_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		return 0;
+	}
+
+	request = list_entry(ioc->hpr_free_list.next,
+	    struct request_tracker, tracker_list);
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt3sas_base_free_smid - put smid back on free_list
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	unsigned long flags;
+	int i;
+	struct chain_tracker *chain_req, *next;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (smid < ioc->hi_priority_smid) {
+		/* scsiio queue */
+		i = smid - 1;
+		if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
+			list_for_each_entry_safe(chain_req, next,
+			    &ioc->scsi_lookup[i].chain_list, tracker_list) {
+				list_del_init(&chain_req->tracker_list);
+				list_add(&chain_req->tracker_list,
+				    &ioc->free_chain_list);
+			}
+		}
+		ioc->scsi_lookup[i].cb_idx = 0xFF;
+		ioc->scsi_lookup[i].scmd = NULL;
+		list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+		/*
+		 * See _wait_for_commands_to_complete() call with regards
+		 * to this code.
+		 */
+		if (ioc->shost_recovery && ioc->pending_io_count) {
+			if (ioc->pending_io_count == 1)
+				wake_up(&ioc->reset_wq);
+			ioc->pending_io_count--;
+		}
+		return;
+	} else if (smid < ioc->internal_smid) {
+		/* hi-priority */
+		i = smid - ioc->hi_priority_smid;
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
+	} else if (smid <= ioc->hba_queue_depth) {
+		/* internal queue */
+		i = smid - ioc->internal_smid;
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		list_add(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
+	}
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
+
+/**
+ * _base_writeq - 64 bit write to MMIO
+ * @ioc: per adapter object
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
+ * care of 32 bit environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+#if defined(writeq) && defined(CONFIG_64BIT)
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+	writeq(cpu_to_le64(b), addr);
+}
+#else
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+	unsigned long flags;
+	__u64 data_out = cpu_to_le64(b);
+
+	spin_lock_irqsave(writeq_lock, flags);
+	writel((u32)(data_out), addr);
+	writel((u32)(data_out >> 32), (addr + 4));
+	spin_unlock_irqrestore(writeq_lock, flags);
+}
+#endif
+
+static inline u8
+_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc)
+{
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
+}
+
+/**
+ * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+
+	descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+	descriptor.SCSIIO.MSIxIndex =  _base_get_msix_index(ioc);
+	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+	descriptor.SCSIIO.LMID = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_fast_path - send fast path request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+	descriptor.SCSIIO.RequestFlags =
+	    MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
+	descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+	descriptor.SCSIIO.LMID = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+	descriptor.HighPriority.RequestFlags =
+	    MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
+	descriptor.HighPriority.MSIxIndex =  0;
+	descriptor.HighPriority.SMID = cpu_to_le16(smid);
+	descriptor.HighPriority.LMID = 0;
+	descriptor.HighPriority.Reserved1 = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_default - Default, primarily used for config pages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+	descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
+	descriptor.Default.MSIxIndex =  _base_get_msix_index(ioc);
+	descriptor.Default.SMID = cpu_to_le16(smid);
+	descriptor.Default.LMID = 0;
+	descriptor.Default.DescriptorTypeDependent = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+
+
+/**
+ * _base_display_ioc_capabilities - Disply IOC's capabilities.
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i = 0;
+	char desc[16];
+	u32 iounit_pg1_flags;
+	u32 bios_version;
+
+	bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+	strncpy(desc, ioc->manu_pg0.ChipName, 16);
+	pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\
+	   "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
+	    ioc->name, desc,
+	   (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+	   (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+	   (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+	   ioc->facts.FWVersion.Word & 0x000000FF,
+	   ioc->pdev->revision,
+	   (bios_version & 0xFF000000) >> 24,
+	   (bios_version & 0x00FF0000) >> 16,
+	   (bios_version & 0x0000FF00) >> 8,
+	    bios_version & 0x000000FF);
+
+	pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
+
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
+		pr_info("Initiator");
+		i++;
+	}
+
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
+		pr_info("%sTarget", i ? "," : "");
+		i++;
+	}
+
+	i = 0;
+	pr_info("), ");
+	pr_info("Capabilities=(");
+
+	if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+			pr_info("Raid");
+			i++;
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
+		pr_info("%sTLR", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
+		pr_info("%sMulticast", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
+		pr_info("%sBIDI Target", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
+		pr_info("%sEEDP", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
+		pr_info("%sSnapshot Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
+		pr_info("%sDiag Trace Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
+		pr_info("%sDiag Extended Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
+		pr_info("%sTask Set Full", i ? "," : "");
+		i++;
+	}
+
+	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+	if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
+		pr_info("%sNCQ", i ? "," : "");
+		i++;
+	}
+
+	pr_info(")\n");
+}
+
+/**
+ * mpt3sas_base_update_missing_delay - change the missing delay timers
+ * @ioc: per adapter object
+ * @device_missing_delay: amount of time till device is reported missing
+ * @io_missing_delay: interval IO is returned when there is a missing device
+ *
+ * Return nothing.
+ *
+ * Passed on the command line, this function will modify the device missing
+ * delay, as well as the io missing delay. This should be called at driver
+ * load time.
+ */
+void
+mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay)
+{
+	u16 dmd, dmd_new, dmd_orignal;
+	u8 io_missing_delay_original;
+	u16 sz;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 num_phys = 0;
+	u16 ioc_status;
+
+	mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys)
+		return;
+
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* device missing delay */
+	dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+	dmd_orignal = dmd;
+	if (device_missing_delay > 0x7F) {
+		dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
+		    device_missing_delay;
+		dmd = dmd / 16;
+		dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
+	} else
+		dmd = device_missing_delay;
+	sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
+
+	/* io missing delay */
+	io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
+	sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
+
+	if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+	    sz)) {
+		if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+			dmd_new = (dmd &
+			    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+		else
+			dmd_new =
+		    dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+		pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n",
+			ioc->name, dmd_orignal, dmd_new);
+		pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n",
+			ioc->name, io_missing_delay_original,
+		    io_missing_delay);
+		ioc->device_missing_delay = dmd_new;
+		ioc->io_missing_delay = io_missing_delay;
+	}
+
+out:
+	kfree(sas_iounit_pg1);
+}
+/**
+ * _base_static_config_pages - static start of day config pages
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	u32 iounit_pg1_flags;
+
+	mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
+	if (ioc->ir_firmware)
+		mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
+		    &ioc->manu_pg10);
+
+	/*
+	 * Ensure correct T10 PI operation if vendor left EEDPTagMode
+	 * flag unset in NVDATA.
+	 */
+	mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
+	if (ioc->manu_pg11.EEDPTagMode == 0) {
+		pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
+		    ioc->name);
+		ioc->manu_pg11.EEDPTagMode &= ~0x3;
+		ioc->manu_pg11.EEDPTagMode |= 0x1;
+		mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
+		    &ioc->manu_pg11);
+	}
+
+	mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
+	mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
+	mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
+	mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
+	mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	_base_display_ioc_capabilities(ioc);
+
+	/*
+	 * Enable task_set_full handling in iounit_pg1 when the
+	 * facts capabilities indicate that its supported.
+	 */
+	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+	if ((ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
+		iounit_pg1_flags &=
+		    ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+	else
+		iounit_pg1_flags |=
+		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
+	mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+}
+
+/**
+ * _base_release_memory_pools - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated from _base_allocate_memory_pools.
+ *
+ * Return nothing.
+ */
+static void
+_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+
+	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	if (ioc->request) {
+		pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
+		    ioc->request,  ioc->request_dma);
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+			"request_pool(0x%p): free\n",
+			ioc->name, ioc->request));
+		ioc->request = NULL;
+	}
+
+	if (ioc->sense) {
+		pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+		if (ioc->sense_dma_pool)
+			pci_pool_destroy(ioc->sense_dma_pool);
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+			"sense_pool(0x%p): free\n",
+			ioc->name, ioc->sense));
+		ioc->sense = NULL;
+	}
+
+	if (ioc->reply) {
+		pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
+		if (ioc->reply_dma_pool)
+			pci_pool_destroy(ioc->reply_dma_pool);
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+			"reply_pool(0x%p): free\n",
+			ioc->name, ioc->reply));
+		ioc->reply = NULL;
+	}
+
+	if (ioc->reply_free) {
+		pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
+		    ioc->reply_free_dma);
+		if (ioc->reply_free_dma_pool)
+			pci_pool_destroy(ioc->reply_free_dma_pool);
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+			"reply_free_pool(0x%p): free\n",
+			ioc->name, ioc->reply_free));
+		ioc->reply_free = NULL;
+	}
+
+	if (ioc->reply_post_free) {
+		pci_pool_free(ioc->reply_post_free_dma_pool,
+		    ioc->reply_post_free, ioc->reply_post_free_dma);
+		if (ioc->reply_post_free_dma_pool)
+			pci_pool_destroy(ioc->reply_post_free_dma_pool);
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+		    "reply_post_free_pool(0x%p): free\n", ioc->name,
+		    ioc->reply_post_free));
+		ioc->reply_post_free = NULL;
+	}
+
+	if (ioc->config_page) {
+		dexitprintk(ioc, pr_info(MPT3SAS_FMT
+		    "config_page(0x%p): free\n", ioc->name,
+		    ioc->config_page));
+		pci_free_consistent(ioc->pdev, ioc->config_page_sz,
+		    ioc->config_page, ioc->config_page_dma);
+	}
+
+	if (ioc->scsi_lookup) {
+		free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
+		ioc->scsi_lookup = NULL;
+	}
+	kfree(ioc->hpr_lookup);
+	kfree(ioc->internal_lookup);
+	if (ioc->chain_lookup) {
+		for (i = 0; i < ioc->chain_depth; i++) {
+			if (ioc->chain_lookup[i].chain_buffer)
+				pci_pool_free(ioc->chain_dma_pool,
+				    ioc->chain_lookup[i].chain_buffer,
+				    ioc->chain_lookup[i].chain_buffer_dma);
+		}
+		if (ioc->chain_dma_pool)
+			pci_pool_destroy(ioc->chain_dma_pool);
+		free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
+		ioc->chain_lookup = NULL;
+	}
+}
+
+/**
+ * _base_allocate_memory_pools - allocate start of day memory pools
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
+{
+	struct mpt3sas_facts *facts;
+	u16 max_sge_elements;
+	u16 chains_needed_per_io;
+	u32 sz, total_sz, reply_post_free_sz;
+	u32 retry_sz;
+	u16 max_request_credit;
+	unsigned short sg_tablesize;
+	u16 sge_size;
+	int i;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+
+	retry_sz = 0;
+	facts = &ioc->facts;
+
+	/* command line tunables for max sgl entries */
+	if (max_sgl_entries != -1)
+		sg_tablesize = max_sgl_entries;
+	else
+		sg_tablesize = MPT3SAS_SG_DEPTH;
+
+	if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
+		sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
+	else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS)
+		sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS;
+	ioc->shost->sg_tablesize = sg_tablesize;
+
+	ioc->hi_priority_depth = facts->HighPriorityCredit;
+	ioc->internal_depth = ioc->hi_priority_depth + (5);
+	/* command line tunables  for max controller queue depth */
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+		    ioc->hi_priority_depth + ioc->internal_depth,
+		    facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else
+		max_request_credit = min_t(u16, facts->RequestCredit,
+		    MAX_HBA_QUEUE_DEPTH);
+
+	ioc->hba_queue_depth = max_request_credit;
+
+	/* request frame size */
+	ioc->request_sz = facts->IOCRequestFrameSize * 4;
+
+	/* reply frame size */
+	ioc->reply_sz = facts->ReplyFrameSize * 4;
+
+	/* calculate the max scatter element size */
+	sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
+
+ retry_allocation:
+	total_sz = 0;
+	/* calculate number of sg elements left over in the 1st frame */
+	max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
+	    sizeof(Mpi2SGEIOUnion_t)) + sge_size);
+	ioc->max_sges_in_main_message = max_sge_elements/sge_size;
+
+	/* now do the same for a chain buffer */
+	max_sge_elements = ioc->request_sz - sge_size;
+	ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
+
+	/*
+	 *  MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
+	 */
+	chains_needed_per_io = ((ioc->shost->sg_tablesize -
+	   ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
+	    + 1;
+	if (chains_needed_per_io > facts->MaxChainDepth) {
+		chains_needed_per_io = facts->MaxChainDepth;
+		ioc->shost->sg_tablesize = min_t(u16,
+		ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
+		* chains_needed_per_io), ioc->shost->sg_tablesize);
+	}
+	ioc->chains_needed_per_io = chains_needed_per_io;
+
+	/* reply free queue sizing - taking into account for 64 FW events */
+	ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+
+	/* calculate reply descriptor post queue depth */
+	ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+				ioc->reply_free_queue_depth +  1 ;
+	/* align the reply post queue on the next 16 count boundary */
+	if (ioc->reply_post_queue_depth % 16)
+		ioc->reply_post_queue_depth += 16 -
+		(ioc->reply_post_queue_depth % 16);
+
+
+	if (ioc->reply_post_queue_depth >
+	    facts->MaxReplyDescriptorPostQueueDepth) {
+		ioc->reply_post_queue_depth =
+				facts->MaxReplyDescriptorPostQueueDepth -
+		    (facts->MaxReplyDescriptorPostQueueDepth % 16);
+		ioc->hba_queue_depth =
+				((ioc->reply_post_queue_depth - 64) / 2) - 1;
+		ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+	}
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \
+	    "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
+	    "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
+	    ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
+	    ioc->chains_needed_per_io));
+
+	ioc->scsiio_depth = ioc->hba_queue_depth -
+	    ioc->hi_priority_depth - ioc->internal_depth;
+
+	/* set the scsi host can_queue depth
+	 * with some internal commands that could be outstanding
+	 */
+	ioc->shost->can_queue = ioc->scsiio_depth;
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"scsi host: can_queue depth (%d)\n",
+		ioc->name, ioc->shost->can_queue));
+
+
+	/* contiguous pool for request and chains, 16 byte align, one extra "
+	 * "frame for smid=0
+	 */
+	ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+	sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
+
+	/* hi-priority queue */
+	sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+	/* internal queue */
+	sz += (ioc->internal_depth * ioc->request_sz);
+
+	ioc->request_dma_sz = sz;
+	ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
+	if (!ioc->request) {
+		pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+		    "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+		    "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
+		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+		if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
+			goto out;
+		retry_sz += 64;
+		ioc->hba_queue_depth = max_request_credit - retry_sz;
+		goto retry_allocation;
+	}
+
+	if (retry_sz)
+		pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \
+		    "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+		    "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
+		    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
+
+	/* hi-priority queue */
+	ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+	ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+
+	/* internal queue */
+	ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+	ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+		ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz,
+	    (ioc->hba_queue_depth * ioc->request_sz)/1024));
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n",
+	    ioc->name, (unsigned long long) ioc->request_dma));
+	total_sz += sz;
+
+	sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
+	ioc->scsi_lookup_pages = get_order(sz);
+	ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
+	    GFP_KERNEL, ioc->scsi_lookup_pages);
+	if (!ioc->scsi_lookup) {
+		pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n",
+			ioc->name, (int)sz);
+		goto out;
+	}
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n",
+		ioc->name, ioc->request, ioc->scsiio_depth));
+
+	ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
+	sz = ioc->chain_depth * sizeof(struct chain_tracker);
+	ioc->chain_pages = get_order(sz);
+	ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
+	    GFP_KERNEL, ioc->chain_pages);
+	if (!ioc->chain_lookup) {
+		pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n",
+			ioc->name);
+		goto out;
+	}
+	ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
+	    ioc->request_sz, 16, 0);
+	if (!ioc->chain_dma_pool) {
+		pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n",
+			ioc->name);
+		goto out;
+	}
+	for (i = 0; i < ioc->chain_depth; i++) {
+		ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
+		    ioc->chain_dma_pool , GFP_KERNEL,
+		    &ioc->chain_lookup[i].chain_buffer_dma);
+		if (!ioc->chain_lookup[i].chain_buffer) {
+			ioc->chain_depth = i;
+			goto chain_done;
+		}
+		total_sz += ioc->request_sz;
+	}
+ chain_done:
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
+		ioc->name, ioc->chain_depth, ioc->request_sz,
+		((ioc->chain_depth *  ioc->request_sz))/1024));
+
+	/* initialize hi-priority queue smid's */
+	ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->hpr_lookup) {
+		pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"hi_priority(0x%p): depth(%d), start smid(%d)\n",
+		ioc->name, ioc->hi_priority,
+	    ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+	/* initialize internal queue smid's */
+	ioc->internal_lookup = kcalloc(ioc->internal_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->internal_lookup) {
+		pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"internal(0x%p): depth(%d), start smid(%d)\n",
+		ioc->name, ioc->internal,
+	    ioc->internal_depth, ioc->internal_smid));
+
+	/* sense buffers, 4 byte align */
+	sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
+	ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
+	    0);
+	if (!ioc->sense_dma_pool) {
+		pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
+	    &ioc->sense_dma);
+	if (!ioc->sense) {
+		pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+	    "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
+	    "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
+	    SCSI_SENSE_BUFFERSIZE, sz/1024));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n",
+	    ioc->name, (unsigned long long)ioc->sense_dma));
+	total_sz += sz;
+
+	/* reply pool, 4 byte align */
+	sz = ioc->reply_free_queue_depth * ioc->reply_sz;
+	ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
+	    0);
+	if (!ioc->reply_dma_pool) {
+		pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
+	    &ioc->reply_dma);
+	if (!ioc->reply) {
+		pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n",
+		    ioc->name);
+		goto out;
+	}
+	ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
+	ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+		ioc->name, ioc->reply,
+	    ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n",
+	    ioc->name, (unsigned long long)ioc->reply_dma));
+	total_sz += sz;
+
+	/* reply free queue, 16 byte align */
+	sz = ioc->reply_free_queue_depth * 4;
+	ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
+	    ioc->pdev, sz, 16, 0);
+	if (!ioc->reply_free_dma_pool) {
+		pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n",
+			ioc->name);
+		goto out;
+	}
+	ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
+	    &ioc->reply_free_dma);
+	if (!ioc->reply_free) {
+		pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n",
+			ioc->name);
+		goto out;
+	}
+	memset(ioc->reply_free, 0, sz);
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \
+	    "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
+	    ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"reply_free_dma (0x%llx)\n",
+		ioc->name, (unsigned long long)ioc->reply_free_dma));
+	total_sz += sz;
+
+	/* reply post queue, 16 byte align */
+	reply_post_free_sz = ioc->reply_post_queue_depth *
+	    sizeof(Mpi2DefaultReplyDescriptor_t);
+	if (_base_is_controller_msix_enabled(ioc))
+		sz = reply_post_free_sz * ioc->reply_queue_count;
+	else
+		sz = reply_post_free_sz;
+	ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
+	    ioc->pdev, sz, 16, 0);
+	if (!ioc->reply_post_free_dma_pool) {
+		pr_err(MPT3SAS_FMT
+			"reply_post_free pool: pci_pool_create failed\n",
+			ioc->name);
+		goto out;
+	}
+	ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
+	    GFP_KERNEL, &ioc->reply_post_free_dma);
+	if (!ioc->reply_post_free) {
+		pr_err(MPT3SAS_FMT
+			"reply_post_free pool: pci_pool_alloc failed\n",
+			ioc->name);
+		goto out;
+	}
+	memset(ioc->reply_post_free, 0, sz);
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply post free pool" \
+	    "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
+	    ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
+	    sz/1024));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"reply_post_free_dma = (0x%llx)\n",
+		ioc->name, (unsigned long long)
+	    ioc->reply_post_free_dma));
+	total_sz += sz;
+
+	ioc->config_page_sz = 512;
+	ioc->config_page = pci_alloc_consistent(ioc->pdev,
+	    ioc->config_page_sz, &ioc->config_page_dma);
+	if (!ioc->config_page) {
+		pr_err(MPT3SAS_FMT
+			"config page: pci_pool_alloc failed\n",
+			ioc->name);
+		goto out;
+	}
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"config page(0x%p): size(%d)\n",
+		ioc->name, ioc->config_page, ioc->config_page_sz));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n",
+		ioc->name, (unsigned long long)ioc->config_page_dma));
+	total_sz += ioc->config_page_sz;
+
+	pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n",
+	    ioc->name, total_sz/1024);
+	pr_info(MPT3SAS_FMT
+		"Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
+	    ioc->name, ioc->shost->can_queue, facts->RequestCredit);
+	pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n",
+	    ioc->name, ioc->shost->sg_tablesize);
+	return 0;
+
+ out:
+	return -ENOMEM;
+}
+
+/**
+ * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Returns all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
+{
+	u32 s, sc;
+
+	s = readl(&ioc->chip->Doorbell);
+	sc = s & MPI2_IOC_STATE_MASK;
+	return cooked ? sc : s;
+}
+
+/**
+ * _base_wait_on_iocstate - waiting on a particular ioc state
+ * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
+	int sleep_flag)
+{
+	u32 count, cntdn;
+	u32 current_state;
+
+	count = 0;
+	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	do {
+		current_state = mpt3sas_base_get_iocstate(ioc, 1);
+		if (current_state == ioc_state)
+			return 0;
+		if (count && current_state == MPI2_IOC_STATE_FAULT)
+			break;
+		if (sleep_flag == CAN_SLEEP)
+			usleep_range(1000, 1500);
+		else
+			udelay(500);
+		count++;
+	} while (--cntdn);
+
+	return current_state;
+}
+
+/**
+ * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
+ * a write to the doorbell)
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
+ */
+static int
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
+	int sleep_flag)
+{
+	u32 cntdn, count;
+	u32 int_status;
+
+	count = 0;
+	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	do {
+		int_status = readl(&ioc->chip->HostInterruptStatus);
+		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			dhsprintk(ioc, pr_info(MPT3SAS_FMT
+				"%s: successful count(%d), timeout(%d)\n",
+				ioc->name, __func__, count, timeout));
+			return 0;
+		}
+		if (sleep_flag == CAN_SLEEP)
+			usleep_range(1000, 1500);
+		else
+			udelay(500);
+		count++;
+	} while (--cntdn);
+
+	pr_err(MPT3SAS_FMT
+		"%s: failed due to timeout count(%d), int_status(%x)!\n",
+		ioc->name, __func__, count, int_status);
+	return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
+ * doorbell.
+ */
+static int
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
+	int sleep_flag)
+{
+	u32 cntdn, count;
+	u32 int_status;
+	u32 doorbell;
+
+	count = 0;
+	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	do {
+		int_status = readl(&ioc->chip->HostInterruptStatus);
+		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
+			dhsprintk(ioc, pr_info(MPT3SAS_FMT
+				"%s: successful count(%d), timeout(%d)\n",
+				ioc->name, __func__, count, timeout));
+			return 0;
+		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			doorbell = readl(&ioc->chip->Doorbell);
+			if ((doorbell & MPI2_IOC_STATE_MASK) ==
+			    MPI2_IOC_STATE_FAULT) {
+				mpt3sas_base_fault_info(ioc , doorbell);
+				return -EFAULT;
+			}
+		} else if (int_status == 0xFFFFFFFF)
+			goto out;
+
+		if (sleep_flag == CAN_SLEEP)
+			usleep_range(1000, 1500);
+		else
+			udelay(500);
+		count++;
+	} while (--cntdn);
+
+ out:
+	pr_err(MPT3SAS_FMT
+	 "%s: failed due to timeout count(%d), int_status(%x)!\n",
+	 ioc->name, __func__, count, int_status);
+	return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
+	int sleep_flag)
+{
+	u32 cntdn, count;
+	u32 doorbell_reg;
+
+	count = 0;
+	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	do {
+		doorbell_reg = readl(&ioc->chip->Doorbell);
+		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
+			dhsprintk(ioc, pr_info(MPT3SAS_FMT
+				"%s: successful count(%d), timeout(%d)\n",
+				ioc->name, __func__, count, timeout));
+			return 0;
+		}
+		if (sleep_flag == CAN_SLEEP)
+			usleep_range(1000, 1500);
+		else
+			udelay(500);
+		count++;
+	} while (--cntdn);
+
+	pr_err(MPT3SAS_FMT
+		"%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
+		ioc->name, __func__, count, doorbell_reg);
+	return -EFAULT;
+}
+
+/**
+ * _base_send_ioc_reset - send doorbell reset
+ * @ioc: per adapter object
+ * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
+	int sleep_flag)
+{
+	u32 ioc_state;
+	int r = 0;
+
+	if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
+		pr_err(MPT3SAS_FMT "%s: unknown reset_type\n",
+		    ioc->name, __func__);
+		return -EFAULT;
+	}
+
+	if (!(ioc->facts.IOCCapabilities &
+	   MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
+		return -EFAULT;
+
+	pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name);
+
+	writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
+	    &ioc->chip->Doorbell);
+	if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
+		r = -EFAULT;
+		goto out;
+	}
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
+	    timeout, sleep_flag);
+	if (ioc_state) {
+		pr_err(MPT3SAS_FMT
+			"%s: failed going to ready state (ioc_state=0x%x)\n",
+			ioc->name, __func__, ioc_state);
+		r = -EFAULT;
+		goto out;
+	}
+ out:
+	pr_info(MPT3SAS_FMT "message unit reset: %s\n",
+	    ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+	return r;
+}
+
+/**
+ * _base_handshake_req_reply_wait - send request thru doorbell interface
+ * @ioc: per adapter object
+ * @request_bytes: request length
+ * @request: pointer having request payload
+ * @reply_bytes: reply length
+ * @reply: pointer to reply payload
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
+	u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
+{
+	MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
+	int i;
+	u8 failed;
+	u16 dummy;
+	__le32 *mfp;
+
+	/* make sure doorbell is not in use */
+	if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+		pr_err(MPT3SAS_FMT
+			"doorbell is in use (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+
+	/* clear pending doorbell interrupts from previous state changes */
+	if (readl(&ioc->chip->HostInterruptStatus) &
+	    MPI2_HIS_IOC2SYS_DB_STATUS)
+		writel(0, &ioc->chip->HostInterruptStatus);
+
+	/* send message to ioc */
+	writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
+	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
+	    &ioc->chip->Doorbell);
+
+	if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
+		pr_err(MPT3SAS_FMT
+			"doorbell handshake int failed (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
+		pr_err(MPT3SAS_FMT
+			"doorbell handshake ack failed (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+
+	/* send message 32-bits at a time */
+	for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
+		writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
+		if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
+			failed = 1;
+	}
+
+	if (failed) {
+		pr_err(MPT3SAS_FMT
+			"doorbell handshake sending request failed (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+
+	/* now wait for the reply */
+	if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
+		pr_err(MPT3SAS_FMT
+			"doorbell handshake int failed (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+
+	/* read the first two 16-bits, it gives the total length of the reply */
+	reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+	    & MPI2_DOORBELL_DATA_MASK);
+	writel(0, &ioc->chip->HostInterruptStatus);
+	if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+		pr_err(MPT3SAS_FMT
+			"doorbell handshake int failed (line=%d)\n",
+			ioc->name, __LINE__);
+		return -EFAULT;
+	}
+	reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+	    & MPI2_DOORBELL_DATA_MASK);
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	for (i = 2; i < default_reply->MsgLength * 2; i++)  {
+		if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+			pr_err(MPT3SAS_FMT
+				"doorbell handshake int failed (line=%d)\n",
+				ioc->name, __LINE__);
+			return -EFAULT;
+		}
+		if (i >=  reply_bytes/2) /* overflow case */
+			dummy = readl(&ioc->chip->Doorbell);
+		else
+			reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+			    & MPI2_DOORBELL_DATA_MASK);
+		writel(0, &ioc->chip->HostInterruptStatus);
+	}
+
+	_base_wait_for_doorbell_int(ioc, 5, sleep_flag);
+	if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
+		dhsprintk(ioc, pr_info(MPT3SAS_FMT
+			"doorbell is in use (line=%d)\n", ioc->name, __LINE__));
+	}
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	if (ioc->logging_level & MPT_DEBUG_INIT) {
+		mfp = (__le32 *)reply;
+		pr_info("\toffset:data\n");
+		for (i = 0; i < reply_bytes/4; i++)
+			pr_info("\t[0x%02x]:%08x\n", i*4,
+			    le32_to_cpu(mfp[i]));
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SAS IO Unit Control Request message allows the host to perform low-level
+ * operations, such as resets on the PHYs of the IO Unit, also allows the host
+ * to obtain the IOC assigned device handles for a device if it has other
+ * identifying information about the device, in addition allows the host to
+ * remove IOC resources associated with the device.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SasIoUnitControlReply_t *mpi_reply,
+	Mpi2SasIoUnitControlRequest_t *mpi_request)
+{
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	u8 issue_reset;
+	int rc;
+	void *request;
+	u16 wait_state_count;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	mutex_lock(&ioc->base_cmds.mutex);
+
+	if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
+	if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
+		ioc->ioc_link_reset_in_progress = 1;
+	init_completion(&ioc->base_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+	    msecs_to_jiffies(10000));
+	if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
+	    ioc->ioc_link_reset_in_progress)
+		ioc->ioc_link_reset_in_progress = 0;
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SasIoUnitControlRequest_t)/4);
+		if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+		memcpy(mpi_reply, ioc->base_cmds.reply,
+		    sizeof(Mpi2SasIoUnitControlReply_t));
+	else
+		memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	goto out;
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	rc = -EFAULT;
+ out:
+	mutex_unlock(&ioc->base_cmds.mutex);
+	return rc;
+}
+
+/**
+ * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SCSI Enclosure Processor request message causes the IOC to
+ * communicate with SES devices to control LED status signals.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
+{
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	u8 issue_reset;
+	int rc;
+	void *request;
+	u16 wait_state_count;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	mutex_lock(&ioc->base_cmds.mutex);
+
+	if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: base_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name,
+		    __func__, wait_state_count);
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
+	init_completion(&ioc->base_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+	    msecs_to_jiffies(10000));
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SepRequest_t)/4);
+		if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+		memcpy(mpi_reply, ioc->base_cmds.reply,
+		    sizeof(Mpi2SepReply_t));
+	else
+		memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	goto out;
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	rc = -EFAULT;
+ out:
+	mutex_unlock(&ioc->base_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _base_get_port_facts - obtain port facts reply and save in ioc
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
+{
+	Mpi2PortFactsRequest_t mpi_request;
+	Mpi2PortFactsReply_t mpi_reply;
+	struct mpt3sas_port_facts *pfacts;
+	int mpi_reply_sz, mpi_request_sz, r;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
+	mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
+	memset(&mpi_request, 0, mpi_request_sz);
+	mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
+	mpi_request.PortNumber = port;
+	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+
+	if (r != 0) {
+		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+		    ioc->name, __func__, r);
+		return r;
+	}
+
+	pfacts = &ioc->pfacts[port];
+	memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
+	pfacts->PortNumber = mpi_reply.PortNumber;
+	pfacts->VP_ID = mpi_reply.VP_ID;
+	pfacts->VF_ID = mpi_reply.VF_ID;
+	pfacts->MaxPostedCmdBuffers =
+	    le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
+
+	return 0;
+}
+
+/**
+ * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	Mpi2IOCFactsRequest_t mpi_request;
+	Mpi2IOCFactsReply_t mpi_reply;
+	struct mpt3sas_facts *facts;
+	int mpi_reply_sz, mpi_request_sz, r;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
+	mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
+	memset(&mpi_request, 0, mpi_request_sz);
+	mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
+	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+
+	if (r != 0) {
+		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+		    ioc->name, __func__, r);
+		return r;
+	}
+
+	facts = &ioc->facts;
+	memset(facts, 0, sizeof(struct mpt3sas_facts));
+	facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
+	facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
+	facts->VP_ID = mpi_reply.VP_ID;
+	facts->VF_ID = mpi_reply.VF_ID;
+	facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
+	facts->MaxChainDepth = mpi_reply.MaxChainDepth;
+	facts->WhoInit = mpi_reply.WhoInit;
+	facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+	facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
+	facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
+	facts->MaxReplyDescriptorPostQueueDepth =
+	    le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
+	facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
+	facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
+	if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
+		ioc->ir_firmware = 1;
+	facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
+	facts->IOCRequestFrameSize =
+	    le16_to_cpu(mpi_reply.IOCRequestFrameSize);
+	facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
+	facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
+	ioc->shost->max_id = -1;
+	facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
+	facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
+	facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
+	facts->HighPriorityCredit =
+	    le16_to_cpu(mpi_reply.HighPriorityCredit);
+	facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
+	facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"hba queue depth(%d), max chains per io(%d)\n",
+		ioc->name, facts->RequestCredit,
+	    facts->MaxChainDepth));
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		"request frame size(%d), reply frame size(%d)\n", ioc->name,
+	    facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
+	return 0;
+}
+
+/**
+ * _base_send_ioc_init - send ioc_init to firmware
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	Mpi2IOCInitRequest_t mpi_request;
+	Mpi2IOCInitReply_t mpi_reply;
+	int r;
+	struct timeval current_time;
+	u16 ioc_status;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
+	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
+	mpi_request.VF_ID = 0; /* TODO */
+	mpi_request.VP_ID = 0;
+	mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
+	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+
+	if (_base_is_controller_msix_enabled(ioc))
+		mpi_request.HostMSIxVectors = ioc->reply_queue_count;
+	mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
+	mpi_request.ReplyDescriptorPostQueueDepth =
+	    cpu_to_le16(ioc->reply_post_queue_depth);
+	mpi_request.ReplyFreeQueueDepth =
+	    cpu_to_le16(ioc->reply_free_queue_depth);
+
+	mpi_request.SenseBufferAddressHigh =
+	    cpu_to_le32((u64)ioc->sense_dma >> 32);
+	mpi_request.SystemReplyAddressHigh =
+	    cpu_to_le32((u64)ioc->reply_dma >> 32);
+	mpi_request.SystemRequestFrameBaseAddress =
+	    cpu_to_le64((u64)ioc->request_dma);
+	mpi_request.ReplyFreeQueueAddress =
+	    cpu_to_le64((u64)ioc->reply_free_dma);
+	mpi_request.ReplyDescriptorPostQueueAddress =
+	    cpu_to_le64((u64)ioc->reply_post_free_dma);
+
+
+	/* This time stamp specifies number of milliseconds
+	 * since epoch ~ midnight January 1, 1970.
+	 */
+	do_gettimeofday(&current_time);
+	mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
+	    (current_time.tv_usec / 1000));
+
+	if (ioc->logging_level & MPT_DEBUG_INIT) {
+		__le32 *mfp;
+		int i;
+
+		mfp = (__le32 *)&mpi_request;
+		pr_info("\toffset:data\n");
+		for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
+			pr_info("\t[0x%02x]:%08x\n", i*4,
+			    le32_to_cpu(mfp[i]));
+	}
+
+	r = _base_handshake_req_reply_wait(ioc,
+	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
+	    sleep_flag);
+
+	if (r != 0) {
+		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
+		    ioc->name, __func__, r);
+		return r;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
+	    mpi_reply.IOCLogInfo) {
+		pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__);
+		r = -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mpt3sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	u16 ioc_status;
+
+	if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (!mpi_reply)
+		return 1;
+
+	if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
+		return 1;
+
+	ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
+	ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
+	ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
+	memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		ioc->port_enable_failed = 1;
+
+	if (ioc->is_driver_loading) {
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+			mpt3sas_port_enable_complete(ioc);
+			return 1;
+		} else {
+			ioc->start_scan_failed = ioc_status;
+			ioc->start_scan = 0;
+			return 1;
+		}
+	}
+	complete(&ioc->port_enable_cmds.done);
+	return 1;
+}
+
+/**
+ * _base_send_port_enable - send port_enable(discovery stuff) to firmware
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	Mpi2PortEnableRequest_t *mpi_request;
+	Mpi2PortEnableReply_t *mpi_reply;
+	unsigned long timeleft;
+	int r = 0;
+	u16 smid;
+	u16 ioc_status;
+
+	pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+		pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->port_enable_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+	init_completion(&ioc->port_enable_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
+	    300*HZ);
+	if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2PortEnableRequest_t)/4);
+		if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
+			r = -EFAULT;
+		else
+			r = -ETIME;
+		goto out;
+	}
+
+	mpi_reply = ioc->port_enable_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n",
+		    ioc->name, __func__, ioc_status);
+		r = -EFAULT;
+		goto out;
+	}
+
+ out:
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+	pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+	    "SUCCESS" : "FAILED"));
+	return r;
+}
+
+/**
+ * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2PortEnableRequest_t *mpi_request;
+	u16 smid;
+
+	pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name);
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+		pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->port_enable_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+	mpt3sas_base_put_smid_default(ioc, smid);
+	return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
+{
+	/* We wait for discovery to complete if IR firmware is loaded.
+	 * The sas topology events arrive before PD events, so we need time to
+	 * turn on the bit in ioc->pd_handles to indicate PD
+	 * Also, it maybe required to report Volumes ahead of physical
+	 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+	 */
+	if (ioc->ir_firmware)
+		return 1;
+
+	/* if no Bios, then we don't need to wait */
+	if (!ioc->bios_pg3.BiosVersion)
+		return 0;
+
+	/* Bios is present, then we drop down here.
+	 *
+	 * If there any entries in the Bios Page 2, then we wait
+	 * for discovery to complete.
+	 */
+
+	/* Current Boot Device */
+	if ((ioc->bios_pg2.CurrentBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Request Boot Device */
+	   (ioc->bios_pg2.ReqBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Alternate Request Boot Device */
+	   (ioc->bios_pg2.ReqAltBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+		return 0;
+
+	return 1;
+}
+
+/**
+ * _base_unmask_events - turn on notification for this event
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The mask is stored in ioc->event_masks.
+ */
+static void
+_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+	u32 desired_event;
+
+	if (event >= 128)
+		return;
+
+	desired_event = (1 << (event % 32));
+
+	if (event < 32)
+		ioc->event_masks[0] &= ~desired_event;
+	else if (event < 64)
+		ioc->event_masks[1] &= ~desired_event;
+	else if (event < 96)
+		ioc->event_masks[2] &= ~desired_event;
+	else if (event < 128)
+		ioc->event_masks[3] &= ~desired_event;
+}
+
+/**
+ * _base_event_notification - send event notification
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	Mpi2EventNotificationRequest_t *mpi_request;
+	unsigned long timeleft;
+	u16 smid;
+	int r = 0;
+	int i;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+		pr_err(MPT3SAS_FMT "%s: internal command already in use\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		mpi_request->EventMasks[i] =
+		    cpu_to_le32(ioc->event_masks[i]);
+	init_completion(&ioc->base_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2EventNotificationRequest_t)/4);
+		if (ioc->base_cmds.status & MPT3_CMD_RESET)
+			r = -EFAULT;
+		else
+			r = -ETIME;
+	} else
+		dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n",
+		    ioc->name, __func__));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	return r;
+}
+
+/**
+ * mpt3sas_base_validate_event_type - validating event types
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * This will turn on firmware event notification when application
+ * ask for that event. We don't mask events that are already enabled.
+ */
+void
+mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
+{
+	int i, j;
+	u32 event_mask, desired_event;
+	u8 send_update_to_fw;
+
+	for (i = 0, send_update_to_fw = 0; i <
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
+		event_mask = ~event_type[i];
+		desired_event = 1;
+		for (j = 0; j < 32; j++) {
+			if (!(event_mask & desired_event) &&
+			    (ioc->event_masks[i] & desired_event)) {
+				ioc->event_masks[i] &= ~desired_event;
+				send_update_to_fw = 1;
+			}
+			desired_event = (desired_event << 1);
+		}
+	}
+
+	if (!send_update_to_fw)
+		return;
+
+	mutex_lock(&ioc->base_cmds.mutex);
+	_base_event_notification(ioc, CAN_SLEEP);
+	mutex_unlock(&ioc->base_cmds.mutex);
+}
+
+/**
+ * _base_diag_reset - the "big hammer" start of day reset
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	u32 host_diagnostic;
+	u32 ioc_state;
+	u32 count;
+	u32 hcb_size;
+
+	pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name);
+
+	drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n",
+	    ioc->name));
+
+	count = 0;
+	do {
+		/* Write magic sequence to WriteSequence register
+		 * Loop until in diagnostic mode
+		 */
+		drsprintk(ioc, pr_info(MPT3SAS_FMT
+			"write magic sequence\n", ioc->name));
+		writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+		/* wait 100 msec */
+		if (sleep_flag == CAN_SLEEP)
+			msleep(100);
+		else
+			mdelay(100);
+
+		if (count++ > 20)
+			goto out;
+
+		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+		drsprintk(ioc, pr_info(MPT3SAS_FMT
+			"wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
+		    ioc->name, count, host_diagnostic));
+
+	} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+
+	hcb_size = readl(&ioc->chip->HCBSize);
+
+	drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n",
+	    ioc->name));
+	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
+	     &ioc->chip->HostDiagnostic);
+
+	/* don't access any registers for 50 milliseconds */
+	msleep(50);
+
+	/* 300 second max wait */
+	for (count = 0; count < 3000000 ; count++) {
+
+		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+
+		if (host_diagnostic == 0xFFFFFFFF)
+			goto out;
+		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
+			break;
+
+		/* wait 1 msec */
+		if (sleep_flag == CAN_SLEEP)
+			usleep_range(1000, 1500);
+		else
+			mdelay(1);
+	}
+
+	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
+
+		drsprintk(ioc, pr_info(MPT3SAS_FMT
+		"restart the adapter assuming the HCB Address points to good F/W\n",
+		    ioc->name));
+		host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
+		host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
+		writel(host_diagnostic, &ioc->chip->HostDiagnostic);
+
+		drsprintk(ioc, pr_info(MPT3SAS_FMT
+		    "re-enable the HCDW\n", ioc->name));
+		writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
+		    &ioc->chip->HCBSize);
+	}
+
+	drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n",
+	    ioc->name));
+	writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
+	    &ioc->chip->HostDiagnostic);
+
+	drsprintk(ioc, pr_info(MPT3SAS_FMT
+		"disable writes to the diagnostic register\n", ioc->name));
+	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+	drsprintk(ioc, pr_info(MPT3SAS_FMT
+		"Wait for FW to go to the READY state\n", ioc->name));
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
+	    sleep_flag);
+	if (ioc_state) {
+		pr_err(MPT3SAS_FMT
+			"%s: failed going to ready state (ioc_state=0x%x)\n",
+			ioc->name, __func__, ioc_state);
+		goto out;
+	}
+
+	pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name);
+	return 0;
+
+ out:
+	pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name);
+	return -EFAULT;
+}
+
+/**
+ * _base_make_ioc_ready - put controller in READY state
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+	enum reset_type type)
+{
+	u32 ioc_state;
+	int rc;
+	int count;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	if (ioc->pci_error_recovery)
+		return 0;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n",
+	    ioc->name, __func__, ioc_state));
+
+	/* if in RESET state, it should move to READY state shortly */
+	count = 0;
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
+		while ((ioc_state & MPI2_IOC_STATE_MASK) !=
+		    MPI2_IOC_STATE_READY) {
+			if (count++ == 10) {
+				pr_err(MPT3SAS_FMT
+					"%s: failed going to ready state (ioc_state=0x%x)\n",
+				    ioc->name, __func__, ioc_state);
+				return -EFAULT;
+			}
+			if (sleep_flag == CAN_SLEEP)
+				ssleep(1);
+			else
+				mdelay(1000);
+			ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		}
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
+		return 0;
+
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, pr_info(MPT3SAS_FMT
+			"unexpected doorbell active!\n",
+			ioc->name));
+		goto issue_diag_reset;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_base_fault_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		goto issue_diag_reset;
+	}
+
+	if (type == FORCE_BIG_HAMMER)
+		goto issue_diag_reset;
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+		if (!(_base_send_ioc_reset(ioc,
+		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
+			return 0;
+	}
+
+ issue_diag_reset:
+	rc = _base_diag_reset(ioc, CAN_SLEEP);
+	return rc;
+}
+
+/**
+ * _base_make_ioc_operational - put controller in OPERATIONAL state
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	int r, i;
+	unsigned long	flags;
+	u32 reply_address;
+	u16 smid;
+	struct _tr_list *delayed_tr, *delayed_tr_next;
+	struct adapter_reply_queue *reply_q;
+	long reply_post_free;
+	u32 reply_post_free_sz;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	/* clean the delayed target reset list */
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
+
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_volume_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
+	/* initialize the scsi lookup free list */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	INIT_LIST_HEAD(&ioc->free_list);
+	smid = 1;
+	for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
+		INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
+		ioc->scsi_lookup[i].cb_idx = 0xFF;
+		ioc->scsi_lookup[i].smid = smid;
+		ioc->scsi_lookup[i].scmd = NULL;
+		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
+		    &ioc->free_list);
+	}
+
+	/* hi-priority queue */
+	INIT_LIST_HEAD(&ioc->hpr_free_list);
+	smid = ioc->hi_priority_smid;
+	for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		ioc->hpr_lookup[i].smid = smid;
+		list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+		    &ioc->hpr_free_list);
+	}
+
+	/* internal queue */
+	INIT_LIST_HEAD(&ioc->internal_free_list);
+	smid = ioc->internal_smid;
+	for (i = 0; i < ioc->internal_depth; i++, smid++) {
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		ioc->internal_lookup[i].smid = smid;
+		list_add_tail(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
+	}
+
+	/* chain pool */
+	INIT_LIST_HEAD(&ioc->free_chain_list);
+	for (i = 0; i < ioc->chain_depth; i++)
+		list_add_tail(&ioc->chain_lookup[i].tracker_list,
+		    &ioc->free_chain_list);
+
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	/* initialize Reply Free Queue */
+	for (i = 0, reply_address = (u32)ioc->reply_dma ;
+	    i < ioc->reply_free_queue_depth ; i++, reply_address +=
+	    ioc->reply_sz)
+		ioc->reply_free[i] = cpu_to_le32(reply_address);
+
+	/* initialize reply queues */
+	if (ioc->is_driver_loading)
+		_base_assign_reply_queues(ioc);
+
+	/* initialize Reply Post Free Queue */
+	reply_post_free = (long)ioc->reply_post_free;
+	reply_post_free_sz = ioc->reply_post_queue_depth *
+	    sizeof(Mpi2DefaultReplyDescriptor_t);
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		reply_q->reply_post_host_index = 0;
+		reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
+		    reply_post_free;
+		for (i = 0; i < ioc->reply_post_queue_depth; i++)
+			reply_q->reply_post_free[i].Words =
+			    cpu_to_le64(ULLONG_MAX);
+		if (!_base_is_controller_msix_enabled(ioc))
+			goto skip_init_reply_post_free_queue;
+		reply_post_free += reply_post_free_sz;
+	}
+ skip_init_reply_post_free_queue:
+
+	r = _base_send_ioc_init(ioc, sleep_flag);
+	if (r)
+		return r;
+
+	/* initialize reply free host index */
+	ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
+	writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
+
+	/* initialize reply post host index */
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
+		    &ioc->chip->ReplyPostHostIndex);
+		if (!_base_is_controller_msix_enabled(ioc))
+			goto skip_init_reply_post_host_index;
+	}
+
+ skip_init_reply_post_host_index:
+
+	_base_unmask_interrupts(ioc);
+	r = _base_event_notification(ioc, sleep_flag);
+	if (r)
+		return r;
+
+	if (sleep_flag == CAN_SLEEP)
+		_base_static_config_pages(ioc);
+
+
+	if (ioc->is_driver_loading) {
+		ioc->wait_for_discovery_to_complete =
+		    _base_determine_wait_on_discovery(ioc);
+
+		return r; /* scan_start and scan_finished support */
+	}
+
+	r = _base_send_port_enable(ioc, sleep_flag);
+	if (r)
+		return r;
+
+	return r;
+}
+
+/**
+ * mpt3sas_base_free_resources - free resources controller resources
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct pci_dev *pdev = ioc->pdev;
+
+	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	_base_mask_interrupts(ioc);
+	ioc->shost_recovery = 1;
+	_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+	ioc->shost_recovery = 0;
+	_base_free_irq(ioc);
+	_base_disable_msix(ioc);
+	if (ioc->chip_phys)
+		iounmap(ioc->chip);
+	ioc->chip_phys = 0;
+	pci_release_selected_regions(ioc->pdev, ioc->bars);
+	pci_disable_pcie_error_reporting(pdev);
+	pci_disable_device(pdev);
+	return;
+}
+
+/**
+ * mpt3sas_base_attach - attach controller instance
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
+{
+	int r, i;
+	int cpu_id, last_cpu_id = 0;
+
+	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	/* setup cpu_msix_table */
+	ioc->cpu_count = num_online_cpus();
+	for_each_online_cpu(cpu_id)
+		last_cpu_id = cpu_id;
+	ioc->cpu_msix_table_sz = last_cpu_id + 1;
+	ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
+	ioc->reply_queue_count = 1;
+	if (!ioc->cpu_msix_table) {
+		dfailprintk(ioc, pr_info(MPT3SAS_FMT
+			"allocation for cpu_msix_table failed!!!\n",
+			ioc->name));
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	r = mpt3sas_base_map_resources(ioc);
+	if (r)
+		goto out_free_resources;
+
+
+	pci_set_drvdata(ioc->pdev, ioc->shost);
+	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	if (r)
+		goto out_free_resources;
+
+	/*
+	 * In SAS3.0,
+	 * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+	 * Target Status - all require the IEEE formated scatter gather
+	 * elements.
+	 */
+
+	ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+	ioc->build_sg = &_base_build_sg_ieee;
+	ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+	ioc->mpi25 = 1;
+	ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+
+	/*
+	 * These function pointers for other requests that don't
+	 * the require IEEE scatter gather elements.
+	 *
+	 * For example Configuration Pages and SAS IOUNIT Control don't.
+	 */
+	ioc->build_sg_mpi = &_base_build_sg;
+	ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
+
+	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+	if (r)
+		goto out_free_resources;
+
+	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+	    sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
+	if (!ioc->pfacts) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+		if (r)
+			goto out_free_resources;
+	}
+
+	r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
+	if (r)
+		goto out_free_resources;
+
+	init_waitqueue_head(&ioc->reset_wq);
+
+	/* allocate memory pd handle bitmask list */
+	ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+	if (ioc->facts.MaxDevHandle % 8)
+		ioc->pd_handles_sz++;
+	ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
+	    GFP_KERNEL);
+	if (!ioc->pd_handles) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+	ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
+	    GFP_KERNEL);
+	if (!ioc->blocking_handles) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	ioc->fwfault_debug = mpt3sas_fwfault_debug;
+
+	/* base internal command bits */
+	mutex_init(&ioc->base_cmds.mutex);
+	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+	/* port_enable command bits */
+	ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+
+	/* transport internal command bits */
+	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->transport_cmds.mutex);
+
+	/* scsih internal command bits */
+	ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->scsih_cmds.mutex);
+
+	/* task management internal command bits */
+	ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->tm_cmds.mutex);
+
+	/* config page internal command bits */
+	ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->config_cmds.mutex);
+
+	/* ctl module internal command bits */
+	ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->ctl_cmds.mutex);
+
+	if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
+	    !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
+	    !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
+	    !ioc->ctl_cmds.sense) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		ioc->event_masks[i] = -1;
+
+	/* here we enable the events we care about */
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
+	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+
+	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
+	if (r)
+		goto out_free_resources;
+
+	return 0;
+
+ out_free_resources:
+
+	ioc->remove_host = 1;
+
+	mpt3sas_base_free_resources(ioc);
+	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->cpu_msix_table);
+	kfree(ioc->pd_handles);
+	kfree(ioc->blocking_handles);
+	kfree(ioc->tm_cmds.reply);
+	kfree(ioc->transport_cmds.reply);
+	kfree(ioc->scsih_cmds.reply);
+	kfree(ioc->config_cmds.reply);
+	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
+	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
+	kfree(ioc->pfacts);
+	ioc->ctl_cmds.reply = NULL;
+	ioc->base_cmds.reply = NULL;
+	ioc->tm_cmds.reply = NULL;
+	ioc->scsih_cmds.reply = NULL;
+	ioc->transport_cmds.reply = NULL;
+	ioc->config_cmds.reply = NULL;
+	ioc->pfacts = NULL;
+	return r;
+}
+
+
+/**
+ * mpt3sas_base_detach - remove controller instance
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
+{
+	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	mpt3sas_base_stop_watchdog(ioc);
+	mpt3sas_base_free_resources(ioc);
+	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->cpu_msix_table);
+	kfree(ioc->pd_handles);
+	kfree(ioc->blocking_handles);
+	kfree(ioc->pfacts);
+	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
+	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
+	kfree(ioc->tm_cmds.reply);
+	kfree(ioc->transport_cmds.reply);
+	kfree(ioc->scsih_cmds.reply);
+	kfree(ioc->config_cmds.reply);
+}
+
+/**
+ * _base_reset_handler - reset callback handler (for base)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
+ * MPT3_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+static void
+_base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
+{
+	mpt3sas_scsih_reset_handler(ioc, reset_phase);
+	mpt3sas_ctl_reset_handler(ioc, reset_phase);
+	switch (reset_phase) {
+	case MPT3_IOC_PRE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT3_IOC_AFTER_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+		if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
+			ioc->transport_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
+			complete(&ioc->transport_cmds.done);
+		}
+		if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+			ioc->base_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
+			complete(&ioc->base_cmds.done);
+		}
+		if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+			ioc->port_enable_failed = 1;
+			ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+			if (ioc->is_driver_loading) {
+				ioc->start_scan_failed =
+				    MPI2_IOCSTATUS_INTERNAL_ERROR;
+				ioc->start_scan = 0;
+				ioc->port_enable_cmds.status =
+				    MPT3_CMD_NOT_USED;
+			} else
+				complete(&ioc->port_enable_cmds.done);
+		}
+		if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
+			ioc->config_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
+			ioc->config_cmds.smid = USHRT_MAX;
+			complete(&ioc->config_cmds.done);
+		}
+		break;
+	case MPT3_IOC_DONE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+		break;
+	}
+}
+
+/**
+ * _wait_for_commands_to_complete - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * This function waiting(3s) for all pending commands to complete
+ * prior to putting controller in reset.
+ */
+static void
+_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+{
+	u32 ioc_state;
+	unsigned long flags;
+	u16 i;
+
+	ioc->pending_io_count = 0;
+	if (sleep_flag != CAN_SLEEP)
+		return;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
+		return;
+
+	/* pending command count */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	for (i = 0; i < ioc->scsiio_depth; i++)
+		if (ioc->scsi_lookup[i].cb_idx != 0xFF)
+			ioc->pending_io_count++;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	if (!ioc->pending_io_count)
+		return;
+
+	/* wait for pending commands to complete */
+	wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
+}
+
+/**
+ * mpt3sas_base_hard_reset_handler - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+	enum reset_type type)
+{
+	int r;
+	unsigned long flags;
+	u32 ioc_state;
+	u8 is_fault = 0, is_trigger = 0;
+
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	if (ioc->pci_error_recovery) {
+		pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n",
+		    ioc->name, __func__);
+		r = 0;
+		goto out_unlocked;
+	}
+
+	if (mpt3sas_fwfault_debug)
+		mpt3sas_halt_firmware(ioc);
+
+	/* TODO - What we really should be doing is pulling
+	 * out all the code associated with NO_SLEEP; its never used.
+	 * That is legacy code from mpt fusion driver, ported over.
+	 * I will leave this BUG_ON here for now till its been resolved.
+	 */
+	BUG_ON(sleep_flag == NO_SLEEP);
+
+	/* wait for an active reset in progress to complete */
+	if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
+		do {
+			ssleep(1);
+		} while (ioc->shost_recovery == 1);
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+		    __func__));
+		return ioc->ioc_reset_in_progress_status;
+	}
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->shost_recovery = 1;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+	    (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED))) {
+		is_trigger = 1;
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+			is_fault = 1;
+	}
+	_base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
+	_wait_for_commands_to_complete(ioc, sleep_flag);
+	_base_mask_interrupts(ioc);
+	r = _base_make_ioc_ready(ioc, sleep_flag, type);
+	if (r)
+		goto out;
+	_base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
+
+	/* If this hard reset is called while port enable is active, then
+	 * there is no reason to call make_ioc_operational
+	 */
+	if (ioc->is_driver_loading && ioc->port_enable_failed) {
+		ioc->remove_host = 1;
+		r = -EFAULT;
+		goto out;
+	}
+	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	if (r)
+		goto out;
+	r = _base_make_ioc_operational(ioc, sleep_flag);
+	if (!r)
+		_base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
+
+ out:
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n",
+	    ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->ioc_reset_in_progress_status = r;
+	ioc->shost_recovery = 0;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->ioc_reset_count++;
+	mutex_unlock(&ioc->reset_in_progress_mutex);
+
+ out_unlocked:
+	if ((r == 0) && is_trigger) {
+		if (is_fault)
+			mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
+		else
+			mpt3sas_trigger_master(ioc,
+			    MASTER_TRIGGER_ADAPTER_RESET);
+	}
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+	return r;
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
new file mode 100644
index 0000000..994656c
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -0,0 +1,1139 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_BASE_H_INCLUDED
+#define MPT3SAS_BASE_H_INCLUDED
+
+#include "mpi/mpi2_type.h"
+#include "mpi/mpi2.h"
+#include "mpi/mpi2_ioc.h"
+#include "mpi/mpi2_cnfg.h"
+#include "mpi/mpi2_init.h"
+#include "mpi/mpi2_raid.h"
+#include "mpi/mpi2_tool.h"
+#include "mpi/mpi2_sas.h"
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "mpt3sas_debug.h"
+#include "mpt3sas_trigger_diag.h"
+
+/* driver versioning info */
+#define MPT3SAS_DRIVER_NAME		"mpt3sas"
+#define MPT3SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
+#define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
+#define MPT3SAS_DRIVER_VERSION		"01.100.01.00"
+#define MPT3SAS_MAJOR_VERSION		1
+#define MPT3SAS_MINOR_VERSION		100
+#define MPT3SAS_BUILD_VERSION		1
+#define MPT3SAS_RELEASE_VERSION	00
+
+/*
+ * Set MPT3SAS_SG_DEPTH value based on user input.
+ */
+#define MPT3SAS_MAX_PHYS_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#define MPT3SAS_MIN_PHYS_SEGMENTS	16
+#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
+#define MPT3SAS_SG_DEPTH		CONFIG_SCSI_MPT3SAS_MAX_SGE
+#else
+#define MPT3SAS_SG_DEPTH		MPT3SAS_MAX_PHYS_SEGMENTS
+#endif
+
+
+/*
+ * Generic Defines
+ */
+#define MPT3SAS_SATA_QUEUE_DEPTH	32
+#define MPT3SAS_SAS_QUEUE_DEPTH		254
+#define MPT3SAS_RAID_QUEUE_DEPTH	128
+
+#define MPT_NAME_LENGTH			32	/* generic length of strings */
+#define MPT_STRING_LENGTH		64
+
+#define MPT_MAX_CALLBACKS		32
+
+
+#define	 CAN_SLEEP			1
+#define  NO_SLEEP			0
+
+#define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
+
+#define MPI3_HIM_MASK			0xFFFFFFFF /* mask every bit*/
+
+#define MPT3SAS_INVALID_DEVICE_HANDLE	0xFFFF
+
+/*
+ * reset phases
+ */
+#define MPT3_IOC_PRE_RESET		1 /* prior to host reset */
+#define MPT3_IOC_AFTER_RESET		2 /* just after host reset */
+#define MPT3_IOC_DONE_RESET		3 /* links re-initialized */
+
+/*
+ * logging format
+ */
+#define MPT3SAS_FMT			"%s: "
+
+/*
+ * per target private data
+ */
+#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
+#define MPT_TARGET_FLAGS_VOLUME		0x02
+#define MPT_TARGET_FLAGS_DELETED	0x04
+#define MPT_TARGET_FASTPATH_IO		0x08
+
+
+
+/*
+ * status bits for ioc->diag_buffer_status
+ */
+#define MPT3_DIAG_BUFFER_IS_REGISTERED	(0x01)
+#define MPT3_DIAG_BUFFER_IS_RELEASED	(0x02)
+#define MPT3_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
+
+
+/* OEM Identifiers */
+#define MFG10_OEM_ID_INVALID                   (0x00000000)
+#define MFG10_OEM_ID_DELL                      (0x00000001)
+#define MFG10_OEM_ID_FSC                       (0x00000002)
+#define MFG10_OEM_ID_SUN                       (0x00000003)
+#define MFG10_OEM_ID_IBM                       (0x00000004)
+
+/* GENERIC Flags 0*/
+#define MFG10_GF0_OCE_DISABLED                 (0x00000001)
+#define MFG10_GF0_R1E_DRIVE_COUNT              (0x00000002)
+#define MFG10_GF0_R10_DISPLAY                  (0x00000004)
+#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE       (0x00000008)
+#define MFG10_GF0_SINGLE_DRIVE_R0              (0x00000010)
+
+/* OEM Specific Flags will come from OEM specific header files */
+struct Mpi2ManufacturingPage10_t {
+	MPI2_CONFIG_PAGE_HEADER	Header;		/* 00h */
+	U8	OEMIdentifier;			/* 04h */
+	U8	Reserved1;			/* 05h */
+	U16	Reserved2;			/* 08h */
+	U32	Reserved3;			/* 0Ch */
+	U32	GenericFlags0;			/* 10h */
+	U32	GenericFlags1;			/* 14h */
+	U32	Reserved4;			/* 18h */
+	U32	OEMSpecificFlags0;		/* 1Ch */
+	U32	OEMSpecificFlags1;		/* 20h */
+	U32	Reserved5[18];			/* 24h - 60h*/
+};
+
+
+/* Miscellaneous options */
+struct Mpi2ManufacturingPage11_t {
+	MPI2_CONFIG_PAGE_HEADER Header;		/* 00h */
+	__le32	Reserved1;			/* 04h */
+	u8	Reserved2;			/* 08h */
+	u8	EEDPTagMode;			/* 09h */
+	u8	Reserved3;			/* 0Ah */
+	u8	Reserved4;			/* 0Bh */
+	__le32	Reserved5[23];			/* 0Ch-60h*/
+};
+
+/**
+ * struct MPT3SAS_TARGET - starget private hostdata
+ * @starget: starget object
+ * @sas_address: target sas address
+ * @handle: device handle
+ * @num_luns: number luns
+ * @flags: MPT_TARGET_FLAGS_XXX flags
+ * @deleted: target flaged for deletion
+ * @tm_busy: target is busy with TM request.
+ */
+struct MPT3SAS_TARGET {
+	struct scsi_target *starget;
+	u64	sas_address;
+	u16	handle;
+	int	num_luns;
+	u32	flags;
+	u8	deleted;
+	u8	tm_busy;
+};
+
+
+/*
+ * per device private data
+ */
+#define MPT_DEVICE_FLAGS_INIT		0x01
+#define MPT_DEVICE_TLR_ON		0x02
+
+/**
+ * struct MPT3SAS_DEVICE - sdev private hostdata
+ * @sas_target: starget private hostdata
+ * @lun: lun number
+ * @flags: MPT_DEVICE_XXX flags
+ * @configured_lun: lun is configured
+ * @block: device is in SDEV_BLOCK state
+ * @tlr_snoop_check: flag used in determining whether to disable TLR
+ * @eedp_enable: eedp support enable bit
+ * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
+ * @eedp_block_length: block size
+ */
+struct MPT3SAS_DEVICE {
+	struct MPT3SAS_TARGET *sas_target;
+	unsigned int	lun;
+	u32	flags;
+	u8	configured_lun;
+	u8	block;
+	u8	tlr_snoop_check;
+};
+
+#define MPT3_CMD_NOT_USED	0x8000	/* free */
+#define MPT3_CMD_COMPLETE	0x0001	/* completed */
+#define MPT3_CMD_PENDING	0x0002	/* pending */
+#define MPT3_CMD_REPLY_VALID	0x0004	/* reply is valid */
+#define MPT3_CMD_RESET		0x0008	/* host reset dropped the command */
+
+/**
+ * struct _internal_cmd - internal commands struct
+ * @mutex: mutex
+ * @done: completion
+ * @reply: reply message pointer
+ * @sense: sense data
+ * @status: MPT3_CMD_XXX status
+ * @smid: system message id
+ */
+struct _internal_cmd {
+	struct mutex mutex;
+	struct completion done;
+	void	*reply;
+	void	*sense;
+	u16	status;
+	u16	smid;
+};
+
+
+
+/**
+ * struct _sas_device - attached device information
+ * @list: sas device list
+ * @starget: starget object
+ * @sas_address: device sas address
+ * @device_name: retrieved from the SAS IDENTIFY frame.
+ * @handle: device handle
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @volume_handle: volume handle (valid when hidden raid member)
+ * @volume_wwid: volume unique identifier
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: number number
+ * @phy: phy identifier provided in sas device page 0
+ * @fast_path: fast path feature enable bit
+ * @responding: used in _scsih_sas_device_mark_responding
+ */
+struct _sas_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	u64	sas_address;
+	u64	device_name;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u16	volume_handle;
+	u64	volume_wwid;
+	u32	device_info;
+	int	id;
+	int	channel;
+	u16	slot;
+	u8	phy;
+	u8	responding;
+	u8	fast_path;
+};
+
+/**
+ * struct _raid_device - raid volume link list
+ * @list: sas device list
+ * @starget: starget object
+ * @sdev: scsi device struct (volumes are single lun)
+ * @wwid: unique identifier for the volume
+ * @handle: device handle
+ * @id: target id
+ * @channel: target channel
+ * @volume_type: the raid level
+ * @device_info: bitfield provides detailed info about the hidden components
+ * @num_pds: number of hidden raid components
+ * @responding: used in _scsih_raid_device_mark_responding
+ * @percent_complete: resync percent complete
+ */
+#define MPT_MAX_WARPDRIVE_PDS		8
+struct _raid_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	struct scsi_device *sdev;
+	u64	wwid;
+	u16	handle;
+	int	id;
+	int	channel;
+	u8	volume_type;
+	u8	num_pds;
+	u8	responding;
+	u8	percent_complete;
+	u32	device_info;
+};
+
+/**
+ * struct _boot_device - boot device info
+ * @is_raid: flag to indicate whether this is volume
+ * @device: holds pointer for either struct _sas_device or
+ *     struct _raid_device
+ */
+struct _boot_device {
+	u8 is_raid;
+	void *device;
+};
+
+/**
+ * struct _sas_port - wide/narrow sas port information
+ * @port_list: list of ports belonging to expander
+ * @num_phys: number of phys belonging to this port
+ * @remote_identify: attached device identification
+ * @rphy: sas transport rphy object
+ * @port: sas transport wide/narrow port object
+ * @phy_list: _sas_phy list objects belonging to this port
+ */
+struct _sas_port {
+	struct list_head port_list;
+	u8	num_phys;
+	struct sas_identify remote_identify;
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct list_head phy_list;
+};
+
+/**
+ * struct _sas_phy - phy information
+ * @port_siblings: list of phys belonging to a port
+ * @identify: phy identification
+ * @remote_identify: attached device identification
+ * @phy: sas transport phy object
+ * @phy_id: unique phy id
+ * @handle: device handle for this phy
+ * @attached_handle: device handle for attached device
+ * @phy_belongs_to_port: port has been created for this phy
+ */
+struct _sas_phy {
+	struct list_head port_siblings;
+	struct sas_identify identify;
+	struct sas_identify remote_identify;
+	struct sas_phy *phy;
+	u8	phy_id;
+	u16	handle;
+	u16	attached_handle;
+	u8	phy_belongs_to_port;
+};
+
+/**
+ * struct _sas_node - sas_host/expander information
+ * @list: list of expanders
+ * @parent_dev: parent device class
+ * @num_phys: number phys belonging to this sas_host/expander
+ * @sas_address: sas address of this sas_host/expander
+ * @handle: handle for this sas_host/expander
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: handle for this a member of an enclosure
+ * @device_info: bitwise defining capabilities of this sas_host/expander
+ * @responding: used in _scsih_expander_device_mark_responding
+ * @phy: a list of phys that make up this sas_host/expander
+ * @sas_port_list: list of ports attached to this sas_host/expander
+ */
+struct _sas_node {
+	struct list_head list;
+	struct device *parent_dev;
+	u8	num_phys;
+	u64	sas_address;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u8	responding;
+	struct	_sas_phy *phy;
+	struct list_head sas_port_list;
+};
+
+/**
+ * enum reset_type - reset state
+ * @FORCE_BIG_HAMMER: issue diagnostic reset
+ * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
+ */
+enum reset_type {
+	FORCE_BIG_HAMMER,
+	SOFT_RESET,
+};
+
+/**
+ * struct chain_tracker - firmware chain tracker
+ * @chain_buffer: chain buffer
+ * @chain_buffer_dma: physical address
+ * @tracker_list: list of free request (ioc->free_chain_list)
+ */
+struct chain_tracker {
+	void *chain_buffer;
+	dma_addr_t chain_buffer_dma;
+	struct list_head tracker_list;
+};
+
+/**
+ * struct scsiio_tracker - scsi mf request tracker
+ * @smid: system message id
+ * @scmd: scsi request pointer
+ * @cb_idx: callback index
+ * @tracker_list: list of free request (ioc->free_list)
+ */
+struct scsiio_tracker {
+	u16	smid;
+	struct scsi_cmnd *scmd;
+	u8	cb_idx;
+	struct list_head chain_list;
+	struct list_head tracker_list;
+};
+
+/**
+ * struct request_tracker - firmware request tracker
+ * @smid: system message id
+ * @cb_idx: callback index
+ * @tracker_list: list of free request (ioc->free_list)
+ */
+struct request_tracker {
+	u16	smid;
+	u8	cb_idx;
+	struct list_head tracker_list;
+};
+
+/**
+ * struct _tr_list - target reset list
+ * @handle: device handle
+ * @state: state machine
+ */
+struct _tr_list {
+	struct list_head list;
+	u16	handle;
+	u16	state;
+};
+
+
+/**
+ * struct adapter_reply_queue - the reply queue struct
+ * @ioc: per adapter object
+ * @msix_index: msix index into vector table
+ * @vector: irq vector
+ * @reply_post_host_index: head index in the pool where FW completes IO
+ * @reply_post_free: reply post base virt address
+ * @name: the name registered to request_irq()
+ * @busy: isr is actively processing replies on another cpu
+ * @list: this list
+*/
+struct adapter_reply_queue {
+	struct MPT3SAS_ADAPTER	*ioc;
+	u8			msix_index;
+	unsigned int		vector;
+	u32			reply_post_host_index;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+	char			name[MPT_NAME_LENGTH];
+	atomic_t		busy;
+	struct list_head	list;
+};
+
+typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
+
+/* SAS3.0 support */
+typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
+		struct scsi_cmnd *scmd, u16 smid);
+typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
+		dma_addr_t data_out_dma, size_t data_out_sz,
+		dma_addr_t data_in_dma, size_t data_in_sz);
+typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
+		void *paddr);
+
+
+
+/* IOC Facts and Port Facts converted from little endian to cpu */
+union mpi3_version_union {
+	MPI2_VERSION_STRUCT		Struct;
+	u32				Word;
+};
+
+struct mpt3sas_facts {
+	u16			MsgVersion;
+	u16			HeaderVersion;
+	u8			IOCNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u16			IOCExceptions;
+	u16			IOCStatus;
+	u32			IOCLogInfo;
+	u8			MaxChainDepth;
+	u8			WhoInit;
+	u8			NumberOfPorts;
+	u8			MaxMSIxVectors;
+	u16			RequestCredit;
+	u16			ProductID;
+	u32			IOCCapabilities;
+	union mpi3_version_union	FWVersion;
+	u16			IOCRequestFrameSize;
+	u16			Reserved3;
+	u16			MaxInitiators;
+	u16			MaxTargets;
+	u16			MaxSasExpanders;
+	u16			MaxEnclosures;
+	u16			ProtocolFlags;
+	u16			HighPriorityCredit;
+	u16			MaxReplyDescriptorPostQueueDepth;
+	u8			ReplyFrameSize;
+	u8			MaxVolumes;
+	u16			MaxDevHandle;
+	u16			MaxPersistentEntries;
+	u16			MinDevHandle;
+};
+
+struct mpt3sas_port_facts {
+	u8			PortNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u8			PortType;
+	u16			MaxPostedCmdBuffers;
+};
+
+/**
+ * enum mutex_type - task management mutex type
+ * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
+ * @TM_MUTEX_ON: mutex is required
+ */
+enum mutex_type {
+	TM_MUTEX_OFF = 0,
+	TM_MUTEX_ON = 1,
+};
+
+typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
+/**
+ * struct MPT3SAS_ADAPTER - per adapter struct
+ * @list: ioc_list
+ * @shost: shost object
+ * @id: unique adapter id
+ * @cpu_count: number online cpus
+ * @name: generic ioc string
+ * @tmp_string: tmp string used for logging
+ * @pdev: pci pdev object
+ * @pio_chip: physical io register space
+ * @chip: memory mapped register space
+ * @chip_phys: physical addrss prior to mapping
+ * @logging_level: see mpt3sas_debug.h
+ * @fwfault_debug: debuging FW timeouts
+ * @ir_firmware: IR firmware present
+ * @bars: bitmask of BAR's that must be configured
+ * @mask_interrupts: ignore interrupt
+ * @fault_reset_work_q_name: fw fault work queue
+ * @fault_reset_work_q: ""
+ * @fault_reset_work: ""
+ * @firmware_event_name: fw event work queue
+ * @firmware_event_thread: ""
+ * @fw_event_lock:
+ * @fw_event_list: list of fw events
+ * @aen_event_read_flag: event log was read
+ * @broadcast_aen_busy: broadcast aen waiting to be serviced
+ * @shost_recovery: host reset in progress
+ * @ioc_reset_in_progress_lock:
+ * @ioc_link_reset_in_progress: phy/hard reset in progress
+ * @ignore_loginfos: ignore loginfos during task management
+ * @remove_host: flag for when driver unloads, to avoid sending dev resets
+ * @pci_error_recovery: flag to prevent ioc access until slot reset completes
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ *                                               waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
+ * @msix_enable: flag indicating msix is enabled
+ * @msix_vector_count: number msix vectors
+ * @cpu_msix_table: table for mapping cpus to msix index
+ * @cpu_msix_table_sz: table size
+ * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
+ * @scsi_io_cb_idx: shost generated commands
+ * @tm_cb_idx: task management commands
+ * @scsih_cb_idx: scsih internal commands
+ * @transport_cb_idx: transport internal commands
+ * @ctl_cb_idx: clt internal commands
+ * @base_cb_idx: base internal commands
+ * @config_cb_idx: base internal commands
+ * @tm_tr_cb_idx : device removal target reset handshake
+ * @tm_tr_volume_cb_idx : volume removal target reset
+ * @base_cmds:
+ * @transport_cmds:
+ * @scsih_cmds:
+ * @tm_cmds:
+ * @ctl_cmds:
+ * @config_cmds:
+ * @base_add_sg_single: handler for either 32/64 bit sgl's
+ * @event_type: bits indicating which events to log
+ * @event_context: unique id for each logged event
+ * @event_log: event log pointer
+ * @event_masks: events that are masked
+ * @facts: static facts data
+ * @pfacts: static port facts data
+ * @manu_pg0: static manufacturing page 0
+ * @manu_pg10: static manufacturing page 10
+ * @manu_pg11: static manufacturing page 11
+ * @bios_pg2: static bios page 2
+ * @bios_pg3: static bios page 3
+ * @ioc_pg8: static ioc page 8
+ * @iounit_pg0: static iounit page 0
+ * @iounit_pg1: static iounit page 1
+ * @sas_hba: sas host object
+ * @sas_expander_list: expander object list
+ * @sas_node_lock:
+ * @sas_device_list: sas device object list
+ * @sas_device_init_list: sas device object list (used only at init time)
+ * @sas_device_lock:
+ * @io_missing_delay: time for IO completed by fw when PDR enabled
+ * @device_missing_delay: time for device missing by fw when PDR enabled
+ * @sas_id : used for setting volume target IDs
+ * @blocking_handles: bitmask used to identify which devices need blocking
+ * @pd_handles : bitmask for PD handles
+ * @pd_handles_sz : size of pd_handle bitmask
+ * @config_page_sz: config page size
+ * @config_page: reserve memory for config page payload
+ * @config_page_dma:
+ * @hba_queue_depth: hba request queue depth
+ * @sge_size: sg element size for either 32/64 bit
+ * @scsiio_depth: SCSI_IO queue depth
+ * @request_sz: per request frame size
+ * @request: pool of request frames
+ * @request_dma:
+ * @request_dma_sz:
+ * @scsi_lookup: firmware request tracker list
+ * @scsi_lookup_lock:
+ * @free_list: free list of request
+ * @pending_io_count:
+ * @reset_wq:
+ * @chain: pool of chains
+ * @chain_dma:
+ * @max_sges_in_main_message: number sg elements in main message
+ * @max_sges_in_chain_message: number sg elements per chain
+ * @chains_needed_per_io: max chains per io
+ * @chain_depth: total chains allocated
+ * @hi_priority_smid:
+ * @hi_priority:
+ * @hi_priority_dma:
+ * @hi_priority_depth:
+ * @hpr_lookup:
+ * @hpr_free_list:
+ * @internal_smid:
+ * @internal:
+ * @internal_dma:
+ * @internal_depth:
+ * @internal_lookup:
+ * @internal_free_list:
+ * @sense: pool of sense
+ * @sense_dma:
+ * @sense_dma_pool:
+ * @reply_depth: hba reply queue depth:
+ * @reply_sz: per reply frame size:
+ * @reply: pool of replys:
+ * @reply_dma:
+ * @reply_dma_pool:
+ * @reply_free_queue_depth: reply free depth
+ * @reply_free: pool for reply free queue (32 bit addr)
+ * @reply_free_dma:
+ * @reply_free_dma_pool:
+ * @reply_free_host_index: tail index in pool to insert free replys
+ * @reply_post_queue_depth: reply post queue depth
+ * @reply_post_free: pool for reply post (64bit descriptor)
+ * @reply_post_free_dma:
+ * @reply_queue_count: number of reply queue's
+ * @reply_queue_list: link list contaning the reply queue info
+ * @reply_post_host_index: head index in the pool where FW completes IO
+ * @delayed_tr_list: target reset link list
+ * @delayed_tr_volume_list: volume target reset link list
+ */
+struct MPT3SAS_ADAPTER {
+	struct list_head list;
+	struct Scsi_Host *shost;
+	u8		id;
+	int		cpu_count;
+	char		name[MPT_NAME_LENGTH];
+	char		tmp_string[MPT_STRING_LENGTH];
+	struct pci_dev	*pdev;
+	Mpi2SystemInterfaceRegs_t __iomem *chip;
+	resource_size_t	chip_phys;
+	int		logging_level;
+	int		fwfault_debug;
+	u8		ir_firmware;
+	int		bars;
+	u8		mask_interrupts;
+
+	/* fw fault handler */
+	char		fault_reset_work_q_name[20];
+	struct workqueue_struct *fault_reset_work_q;
+	struct delayed_work fault_reset_work;
+
+	/* fw event handler */
+	char		firmware_event_name[20];
+	struct workqueue_struct	*firmware_event_thread;
+	spinlock_t	fw_event_lock;
+	struct list_head fw_event_list;
+
+	 /* misc flags */
+	int		aen_event_read_flag;
+	u8		broadcast_aen_busy;
+	u16		broadcast_aen_pending;
+	u8		shost_recovery;
+
+	struct mutex	reset_in_progress_mutex;
+	spinlock_t	ioc_reset_in_progress_lock;
+	u8		ioc_link_reset_in_progress;
+	u8		ioc_reset_in_progress_status;
+
+	u8		ignore_loginfos;
+	u8		remove_host;
+	u8		pci_error_recovery;
+	u8		wait_for_discovery_to_complete;
+	u8		is_driver_loading;
+	u8		port_enable_failed;
+	u8		start_scan;
+	u16		start_scan_failed;
+
+	u8		msix_enable;
+	u16		msix_vector_count;
+	u8		*cpu_msix_table;
+	u16		cpu_msix_table_sz;
+	u32		ioc_reset_count;
+	MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
+
+	/* internal commands, callback index */
+	u8		scsi_io_cb_idx;
+	u8		tm_cb_idx;
+	u8		transport_cb_idx;
+	u8		scsih_cb_idx;
+	u8		ctl_cb_idx;
+	u8		base_cb_idx;
+	u8		port_enable_cb_idx;
+	u8		config_cb_idx;
+	u8		tm_tr_cb_idx;
+	u8		tm_tr_volume_cb_idx;
+	u8		tm_sas_control_cb_idx;
+	struct _internal_cmd base_cmds;
+	struct _internal_cmd port_enable_cmds;
+	struct _internal_cmd transport_cmds;
+	struct _internal_cmd scsih_cmds;
+	struct _internal_cmd tm_cmds;
+	struct _internal_cmd ctl_cmds;
+	struct _internal_cmd config_cmds;
+
+	MPT_ADD_SGE	base_add_sg_single;
+
+	/* function ptr for either IEEE or MPI sg elements */
+	MPT_BUILD_SG_SCMD build_sg_scmd;
+	MPT_BUILD_SG    build_sg;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
+	u8              mpi25;
+	u16             sge_size_ieee;
+
+	/* function ptr for MPI sg elements only */
+	MPT_BUILD_SG    build_sg_mpi;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi;
+
+	/* event log */
+	u32		event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+	u32		event_context;
+	void		*event_log;
+	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+
+	/* static config pages */
+	struct mpt3sas_facts facts;
+	struct mpt3sas_port_facts *pfacts;
+	Mpi2ManufacturingPage0_t manu_pg0;
+	struct Mpi2ManufacturingPage10_t manu_pg10;
+	struct Mpi2ManufacturingPage11_t manu_pg11;
+	Mpi2BiosPage2_t	bios_pg2;
+	Mpi2BiosPage3_t	bios_pg3;
+	Mpi2IOCPage8_t ioc_pg8;
+	Mpi2IOUnitPage0_t iounit_pg0;
+	Mpi2IOUnitPage1_t iounit_pg1;
+
+	struct _boot_device req_boot_device;
+	struct _boot_device req_alt_boot_device;
+	struct _boot_device current_boot_device;
+
+	/* sas hba, expander, and device list */
+	struct _sas_node sas_hba;
+	struct list_head sas_expander_list;
+	spinlock_t	sas_node_lock;
+	struct list_head sas_device_list;
+	struct list_head sas_device_init_list;
+	spinlock_t	sas_device_lock;
+	struct list_head raid_device_list;
+	spinlock_t	raid_device_lock;
+	u8		io_missing_delay;
+	u16		device_missing_delay;
+	int		sas_id;
+
+	void		*blocking_handles;
+	void		*pd_handles;
+	u16		pd_handles_sz;
+
+	/* config page */
+	u16		config_page_sz;
+	void		*config_page;
+	dma_addr_t	config_page_dma;
+
+	/* scsiio request */
+	u16		hba_queue_depth;
+	u16		sge_size;
+	u16		scsiio_depth;
+	u16		request_sz;
+	u8		*request;
+	dma_addr_t	request_dma;
+	u32		request_dma_sz;
+	struct scsiio_tracker *scsi_lookup;
+	ulong		scsi_lookup_pages;
+	spinlock_t	scsi_lookup_lock;
+	struct list_head free_list;
+	int		pending_io_count;
+	wait_queue_head_t reset_wq;
+
+	/* chain */
+	struct chain_tracker *chain_lookup;
+	struct list_head free_chain_list;
+	struct dma_pool *chain_dma_pool;
+	ulong		chain_pages;
+	u16		max_sges_in_main_message;
+	u16		max_sges_in_chain_message;
+	u16		chains_needed_per_io;
+	u32		chain_depth;
+
+	/* hi-priority queue */
+	u16		hi_priority_smid;
+	u8		*hi_priority;
+	dma_addr_t	hi_priority_dma;
+	u16		hi_priority_depth;
+	struct request_tracker *hpr_lookup;
+	struct list_head hpr_free_list;
+
+	/* internal queue */
+	u16		internal_smid;
+	u8		*internal;
+	dma_addr_t	internal_dma;
+	u16		internal_depth;
+	struct request_tracker *internal_lookup;
+	struct list_head internal_free_list;
+
+	/* sense */
+	u8		*sense;
+	dma_addr_t	sense_dma;
+	struct dma_pool *sense_dma_pool;
+
+	/* reply */
+	u16		reply_sz;
+	u8		*reply;
+	dma_addr_t	reply_dma;
+	u32		reply_dma_max_address;
+	u32		reply_dma_min_address;
+	struct dma_pool *reply_dma_pool;
+
+	/* reply free queue */
+	u16		reply_free_queue_depth;
+	__le32		*reply_free;
+	dma_addr_t	reply_free_dma;
+	struct dma_pool *reply_free_dma_pool;
+	u32		reply_free_host_index;
+
+	/* reply post queue */
+	u16		reply_post_queue_depth;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+	dma_addr_t	reply_post_free_dma;
+	struct dma_pool *reply_post_free_dma_pool;
+	u8		reply_queue_count;
+	struct list_head reply_queue_list;
+
+	struct list_head delayed_tr_list;
+	struct list_head delayed_tr_volume_list;
+
+	/* diag buffer support */
+	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
+	dma_addr_t	diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
+	u8		diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
+	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		ring_buffer_offset;
+	u32		ring_buffer_sz;
+	spinlock_t	diag_trigger_lock;
+	u8		diag_trigger_active;
+	struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
+	struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event;
+	struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi;
+	struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi;
+};
+
+typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+
+
+/* base shared API */
+extern struct list_head mpt3sas_ioc_list;
+void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+	enum reset_type type);
+
+void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+void mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc);
+
+/* hi-priority queue */
+u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+	struct scsi_cmnd *scmd);
+
+u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle);
+void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle);
+void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_initialize_callback_handler(void);
+u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func);
+void mpt3sas_base_release_callback_handler(u8 cb_idx);
+
+u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply);
+void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc,
+	u32 phys_addr);
+
+u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked);
+
+void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code);
+int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SasIoUnitControlReply_t *mpi_reply,
+	Mpi2SasIoUnitControlRequest_t *mpi_request);
+int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
+
+void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc,
+	u32 *event_type);
+
+void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc);
+
+void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay);
+
+int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
+
+
+/* scsih shared API */
+u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply);
+void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
+
+int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, uint lun, u8 type, u16 smid_task,
+	ulong timeout, unsigned long serial_number,  enum mutex_type m_type);
+void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address);
+
+struct _sas_node *mpt3sas_scsih_expander_find_by_handle(
+	struct MPT3SAS_ADAPTER *ioc, u16 handle);
+struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
+	struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+struct _sas_device *mpt3sas_scsih_sas_device_find_by_sas_address(
+	struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
+
+void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+
+/* config shared API */
+u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc,
+	u8 *num_phys);
+int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
+int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage10_t *config_page);
+
+int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t  *config_page);
+int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page);
+
+int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage2_t *config_page);
+int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage3_t *config_page);
+int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage0_t *config_page);
+int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage8_t *config_page);
+int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page,
+	u32 phy_number, u16 handle);
+int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
+int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
+int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
+	u32 handle);
+int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 *num_pds);
+int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
+	u32 handle, u16 sz);
+int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page,
+	u32 form, u32 form_specific);
+int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
+	u16 *volume_handle);
+int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
+	u16 volume_handle, u64 *wwid);
+
+/* ctl shared API */
+extern struct device_attribute *mpt3sas_host_attrs[];
+extern struct device_attribute *mpt3sas_dev_attrs[];
+void mpt3sas_ctl_init(void);
+void mpt3sas_ctl_exit(void);
+u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
+u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc,
+	u8 msix_index, u32 reply);
+void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply);
+
+void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
+	u8 bits_to_regsiter);
+int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
+	u8 *issue_reset);
+
+/* transport shared API */
+u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, u64 sas_address);
+void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u64 sas_address_parent);
+int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
+int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
+	struct device *parent_dev);
+void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
+extern struct sas_function_template mpt3sas_transport_functions;
+extern struct scsi_transport_template *mpt3sas_transport_template;
+extern int scsi_internal_device_block(struct scsi_device *sdev);
+extern int scsi_internal_device_unblock(struct scsi_device *sdev,
+				enum scsi_device_state new_state);
+/* trigger data externs */
+void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc,
+	u32 tigger_bitmask);
+void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier);
+void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
+	u8 asc, u8 ascq);
+void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
+	u32 loginfo);
+#endif /* MPT3SAS_BASE_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
new file mode 100644
index 0000000..ce7e59b
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -0,0 +1,1650 @@
+/*
+ * This module provides common API for accessing firmware configuration pages
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include "mpt3sas_base.h"
+
+/* local definitions */
+
+/* Timeout for config page request (in seconds) */
+#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15
+
+/* Common sgl flags for READING a config page. */
+#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
+	MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
+	| MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
+
+/* Common sgl flags for WRITING a config page. */
+#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
+	MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
+	| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
+	<< MPI2_SGE_FLAGS_SHIFT)
+
+/**
+ * struct config_request - obtain dma memory via routine
+ * @sz: size
+ * @page: virt pointer
+ * @page_dma: phys pointer
+ *
+ */
+struct config_request {
+	u16			sz;
+	void			*page;
+	dma_addr_t		page_dma;
+};
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _config_display_some_debug - debug routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @calling_function_name: string pass from calling function
+ * @mpi_reply: reply message frame
+ * Context: none.
+ *
+ * Function for displaying debug info helpful when debugging issues
+ * in this module.
+ */
+static void
+_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
+{
+	Mpi2ConfigRequest_t *mpi_request;
+	char *desc = NULL;
+
+	if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+		return;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
+	case MPI2_CONFIG_PAGETYPE_IO_UNIT:
+		desc = "io_unit";
+		break;
+	case MPI2_CONFIG_PAGETYPE_IOC:
+		desc = "ioc";
+		break;
+	case MPI2_CONFIG_PAGETYPE_BIOS:
+		desc = "bios";
+		break;
+	case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
+		desc = "raid_volume";
+		break;
+	case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
+		desc = "manufaucturing";
+		break;
+	case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
+		desc = "physdisk";
+		break;
+	case MPI2_CONFIG_PAGETYPE_EXTENDED:
+		switch (mpi_request->ExtPageType) {
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
+			desc = "sas_io_unit";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
+			desc = "sas_expander";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
+			desc = "sas_device";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
+			desc = "sas_phy";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_LOG:
+			desc = "log";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
+			desc = "enclosure";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
+			desc = "raid_config";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
+			desc = "driver_mappping";
+			break;
+		}
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	pr_info(MPT3SAS_FMT
+		"%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
+		ioc->name, calling_function_name, desc,
+	    mpi_request->Header.PageNumber, mpi_request->Action,
+	    le32_to_cpu(mpi_request->PageAddress), smid);
+
+	if (!mpi_reply)
+		return;
+
+	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
+		pr_info(MPT3SAS_FMT
+		    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo));
+}
+#endif
+
+/**
+ * _config_alloc_config_dma_memory - obtain physical memory
+ * @ioc: per adapter object
+ * @mem: struct config_request
+ *
+ * A wrapper for obtaining dma-able memory for config page request.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
+	struct config_request *mem)
+{
+	int r = 0;
+
+	if (mem->sz > ioc->config_page_sz) {
+		mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
+		    &mem->page_dma, GFP_KERNEL);
+		if (!mem->page) {
+			pr_err(MPT3SAS_FMT
+				"%s: dma_alloc_coherent failed asking for (%d) bytes!!\n",
+			    ioc->name, __func__, mem->sz);
+			r = -ENOMEM;
+		}
+	} else { /* use tmp buffer if less than 512 bytes */
+		mem->page = ioc->config_page;
+		mem->page_dma = ioc->config_page_dma;
+	}
+	return r;
+}
+
+/**
+ * _config_free_config_dma_memory - wrapper to free the memory
+ * @ioc: per adapter object
+ * @mem: struct config_request
+ *
+ * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static void
+_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
+	struct config_request *mem)
+{
+	if (mem->sz > ioc->config_page_sz)
+		dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
+		    mem->page_dma);
+}
+
+/**
+ * mpt3sas_config_done - config page completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using _config_request.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	if (ioc->config_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->config_cmds.smid != smid)
+		return 1;
+	ioc->config_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID;
+		memcpy(ioc->config_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+	}
+	ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
+#endif
+	ioc->config_cmds.smid = USHRT_MAX;
+	complete(&ioc->config_cmds.done);
+	return 1;
+}
+
+/**
+ * _config_request - main routine for sending config page requests
+ * @ioc: per adapter object
+ * @mpi_request: request message frame
+ * @mpi_reply: reply mf payload returned from firmware
+ * @timeout: timeout in seconds
+ * @config_page: contents of the config page
+ * @config_page_sz: size of config page
+ * Context: sleep
+ *
+ * A generic API for config page requests to firmware.
+ *
+ * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling
+ * this API.
+ *
+ * The callback index is set inside `ioc->config_cb_idx.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
+	*mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
+	void *config_page, u16 config_page_sz)
+{
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	Mpi2ConfigRequest_t *config_request;
+	int r;
+	u8 retry_count, issue_host_reset = 0;
+	u16 wait_state_count;
+	struct config_request mem;
+	u32 ioc_status = UINT_MAX;
+
+	mutex_lock(&ioc->config_cmds.mutex);
+	if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: config_cmd in use\n",
+		    ioc->name, __func__);
+		mutex_unlock(&ioc->config_cmds.mutex);
+		return -EAGAIN;
+	}
+
+	retry_count = 0;
+	memset(&mem, 0, sizeof(struct config_request));
+
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	if (config_page) {
+		mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
+		mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
+		mpi_request->Header.PageType = mpi_reply->Header.PageType;
+		mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
+		mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
+		mpi_request->ExtPageType = mpi_reply->ExtPageType;
+		if (mpi_request->Header.PageLength)
+			mem.sz = mpi_request->Header.PageLength * 4;
+		else
+			mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
+		r = _config_alloc_config_dma_memory(ioc, &mem);
+		if (r != 0)
+			goto out;
+		if (mpi_request->Action ==
+		    MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
+		    mpi_request->Action ==
+		    MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
+			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
+			    MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
+			    mem.page_dma);
+			memcpy(mem.page, config_page, min_t(u16, mem.sz,
+			    config_page_sz));
+		} else {
+			memset(config_page, 0, config_page_sz);
+			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
+			    MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
+			memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz));
+		}
+	}
+
+ retry_config:
+	if (retry_count) {
+		if (retry_count > 2) { /* attempt only 2 retries */
+			r = -EFAULT;
+			goto free_mem;
+		}
+		pr_info(MPT3SAS_FMT "%s: attempting retry (%d)\n",
+		    ioc->name, __func__, retry_count);
+	}
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+			r = -EFAULT;
+			goto free_mem;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+		r = -EAGAIN;
+		goto free_mem;
+	}
+
+	r = 0;
+	memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
+	ioc->config_cmds.status = MPT3_CMD_PENDING;
+	config_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->config_cmds.smid = smid;
+	memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	_config_display_some_debug(ioc, smid, "config_request", NULL);
+#endif
+	init_completion(&ioc->config_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
+	    timeout*HZ);
+	if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2ConfigRequest_t)/4);
+		retry_count++;
+		if (ioc->config_cmds.smid == smid)
+			mpt3sas_base_free_smid(ioc, smid);
+		if ((ioc->shost_recovery) || (ioc->config_cmds.status &
+		    MPT3_CMD_RESET) || ioc->pci_error_recovery)
+			goto retry_config;
+		issue_host_reset = 1;
+		r = -EFAULT;
+		goto free_mem;
+	}
+
+	if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) {
+		memcpy(mpi_reply, ioc->config_cmds.reply,
+		    sizeof(Mpi2ConfigReply_t));
+
+		/* Reply Frame Sanity Checks to workaround FW issues */
+		if ((mpi_request->Header.PageType & 0xF) !=
+		    (mpi_reply->Header.PageType & 0xF)) {
+			_debug_dump_mf(mpi_request, ioc->request_sz/4);
+			_debug_dump_reply(mpi_reply, ioc->request_sz/4);
+			panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
+			    " mpi_reply mismatch: Requested PageType(0x%02x)" \
+			    " Reply PageType(0x%02x)\n", \
+			    ioc->name, __func__,
+			    (mpi_request->Header.PageType & 0xF),
+			    (mpi_reply->Header.PageType & 0xF));
+		}
+
+		if (((mpi_request->Header.PageType & 0xF) ==
+		    MPI2_CONFIG_PAGETYPE_EXTENDED) &&
+		    mpi_request->ExtPageType != mpi_reply->ExtPageType) {
+			_debug_dump_mf(mpi_request, ioc->request_sz/4);
+			_debug_dump_reply(mpi_reply, ioc->request_sz/4);
+			panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
+			    " mpi_reply mismatch: Requested ExtPageType(0x%02x)"
+			    " Reply ExtPageType(0x%02x)\n",
+			    ioc->name, __func__, mpi_request->ExtPageType,
+			    mpi_reply->ExtPageType);
+		}
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+		    & MPI2_IOCSTATUS_MASK;
+	}
+
+	if (retry_count)
+		pr_info(MPT3SAS_FMT "%s: retry (%d) completed!!\n", \
+		    ioc->name, __func__, retry_count);
+
+	if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
+	    config_page && mpi_request->Action ==
+	    MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) {
+		u8 *p = (u8 *)mem.page;
+
+		/* Config Page Sanity Checks to workaround FW issues */
+		if (p) {
+			if ((mpi_request->Header.PageType & 0xF) !=
+			    (p[3] & 0xF)) {
+				_debug_dump_mf(mpi_request, ioc->request_sz/4);
+				_debug_dump_reply(mpi_reply, ioc->request_sz/4);
+				_debug_dump_config(p, min_t(u16, mem.sz,
+				    config_page_sz)/4);
+				panic(KERN_WARNING MPT3SAS_FMT
+					"%s: Firmware BUG:" \
+				    " config page mismatch:"
+				    " Requested PageType(0x%02x)"
+				    " Reply PageType(0x%02x)\n",
+				    ioc->name, __func__,
+				    (mpi_request->Header.PageType & 0xF),
+				    (p[3] & 0xF));
+			}
+
+			if (((mpi_request->Header.PageType & 0xF) ==
+			    MPI2_CONFIG_PAGETYPE_EXTENDED) &&
+			    (mpi_request->ExtPageType != p[6])) {
+				_debug_dump_mf(mpi_request, ioc->request_sz/4);
+				_debug_dump_reply(mpi_reply, ioc->request_sz/4);
+				_debug_dump_config(p, min_t(u16, mem.sz,
+				    config_page_sz)/4);
+				panic(KERN_WARNING MPT3SAS_FMT
+					"%s: Firmware BUG:" \
+				    " config page mismatch:"
+				    " Requested ExtPageType(0x%02x)"
+				    " Reply ExtPageType(0x%02x)\n",
+				    ioc->name, __func__,
+				    mpi_request->ExtPageType, p[6]);
+			}
+		}
+		memcpy(config_page, mem.page, min_t(u16, mem.sz,
+		    config_page_sz));
+	}
+
+ free_mem:
+	if (config_page)
+		_config_free_config_dma_memory(ioc, &mem);
+ out:
+	ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->config_cmds.mutex);
+
+	if (issue_host_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 7;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage10_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 10;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 11;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 11;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_bios_pg2 - obtain bios page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_bios_pg3 - obtain bios page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_iounit_pg1 - set iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
+	mpi_request.Header.PageNumber = 8;
+	mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
+	mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
+	mpi_request.Header.PageNumber = 0;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
+	mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
+	mpi_request.Header.PageNumber = 1;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
+ * @ioc: per adapter object
+ * @num_phys: pointer returned with the number of phys
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+	u16 ioc_status;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t config_page;
+
+	*num_phys = 0;
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
+	    sizeof(Mpi2SasIOUnitPage0_t));
+	if (!r) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
+			*num_phys = config_page.NumPhys;
+	}
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_expander_pg0 - obtain expander page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_expander_pg1 - obtain expander page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
+	u16 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
+	    (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phy_pg0 - obtain phy page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phy_pg1 - obtain phy page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: volume handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
+	u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume
+ * @ioc: per adapter object
+ * @handle: volume handle
+ * @num_pds: returns pds count
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 *num_pds)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	Mpi2RaidVolPage0_t config_page;
+	Mpi2ConfigReply_t mpi_reply;
+	int r;
+	u16 ioc_status;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	*num_pds = 0;
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
+	    sizeof(Mpi2RaidVolPage0_t));
+	if (!r) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
+			*num_pds = config_page.NumPhysDisks;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: volume handle
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
+	u32 handle, u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
+ * @form_specific: specific to the form
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
+	u32 form_specific)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | form_specific);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_volume_handle - returns volume handle for give hidden
+ * raid components
+ * @ioc: per adapter object
+ * @pd_handle: phys disk handle
+ * @volume_handle: volume handle
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
+	u16 *volume_handle)
+{
+	Mpi2RaidConfigurationPage0_t *config_page = NULL;
+	Mpi2ConfigRequest_t mpi_request;
+	Mpi2ConfigReply_t mpi_reply;
+	int r, i, config_page_sz;
+	u16 ioc_status;
+	int config_num;
+	u16 element_type;
+	u16 phys_disk_dev_handle;
+
+	*volume_handle = 0;
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
+	mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
+	mpi_request.Header.PageNumber = 0;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
+	config_page = kmalloc(config_page_sz, GFP_KERNEL);
+	if (!config_page) {
+		r = -1;
+		goto out;
+	}
+
+	config_num = 0xff;
+	while (1) {
+		mpi_request.PageAddress = cpu_to_le32(config_num +
+		    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
+		r = _config_request(ioc, &mpi_request, &mpi_reply,
+		    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+		    config_page_sz);
+		if (r)
+			goto out;
+		r = -1;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			goto out;
+		for (i = 0; i < config_page->NumElements; i++) {
+			element_type = le16_to_cpu(config_page->
+			    ConfigElement[i].ElementFlags) &
+			    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
+			if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
+			    element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
+				phys_disk_dev_handle =
+				    le16_to_cpu(config_page->ConfigElement[i].
+				    PhysDiskDevHandle);
+				if (phys_disk_dev_handle == pd_handle) {
+					*volume_handle =
+					    le16_to_cpu(config_page->
+					    ConfigElement[i].VolDevHandle);
+					r = 0;
+					goto out;
+				}
+			} else if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
+				*volume_handle = 0;
+				r = 0;
+				goto out;
+			}
+		}
+		config_num = config_page->ConfigNum;
+	}
+ out:
+	kfree(config_page);
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle
+ * @ioc: per adapter object
+ * @volume_handle: volume handle
+ * @wwid: volume wwid
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle,
+	u64 *wwid)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2RaidVolPage1_t raid_vol_pg1;
+
+	*wwid = 0;
+	if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
+	    volume_handle))) {
+		*wwid = le64_to_cpu(raid_vol_pg1.WWID);
+		return 0;
+	} else
+		return -1;
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
new file mode 100644
index 0000000..8af944d
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -0,0 +1,3297 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt3sas_base.h"
+#include "mpt3sas_ctl.h"
+
+
+static struct fasync_struct *async_queue;
+static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+
+
+/**
+ * enum block_state - blocking state
+ * @NON_BLOCKING: non blocking
+ * @BLOCKING: blocking
+ *
+ * These states are for ioctls that need to wait for a response
+ * from firmware, so they probably require sleep.
+ */
+enum block_state {
+	NON_BLOCKING,
+	BLOCKING,
+};
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _ctl_sas_device_find_by_handle - sas device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+static struct _sas_device *
+_ctl_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (sas_device->handle != handle)
+			continue;
+		r = sas_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _ctl_display_some_debug - debug routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @calling_function_name: string pass from calling function
+ * @mpi_reply: reply message frame
+ * Context: none.
+ *
+ * Function for displaying debug info helpful when debugging issues
+ * in this module.
+ */
+static void
+_ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
+{
+	Mpi2ConfigRequest_t *mpi_request;
+	char *desc = NULL;
+
+	if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
+		return;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	switch (mpi_request->Function) {
+	case MPI2_FUNCTION_SCSI_IO_REQUEST:
+	{
+		Mpi2SCSIIORequest_t *scsi_request =
+		    (Mpi2SCSIIORequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "scsi_io, cmd(0x%02x), cdb_len(%d)",
+		    scsi_request->CDB.CDB32[0],
+		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+		desc = "task_mgmt";
+		break;
+	case MPI2_FUNCTION_IOC_INIT:
+		desc = "ioc_init";
+		break;
+	case MPI2_FUNCTION_IOC_FACTS:
+		desc = "ioc_facts";
+		break;
+	case MPI2_FUNCTION_CONFIG:
+	{
+		Mpi2ConfigRequest_t *config_request =
+		    (Mpi2ConfigRequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "config, type(0x%02x), ext_type(0x%02x), number(%d)",
+		    (config_request->Header.PageType &
+		     MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
+		    config_request->Header.PageNumber);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_PORT_FACTS:
+		desc = "port_facts";
+		break;
+	case MPI2_FUNCTION_PORT_ENABLE:
+		desc = "port_enable";
+		break;
+	case MPI2_FUNCTION_EVENT_NOTIFICATION:
+		desc = "event_notification";
+		break;
+	case MPI2_FUNCTION_FW_DOWNLOAD:
+		desc = "fw_download";
+		break;
+	case MPI2_FUNCTION_FW_UPLOAD:
+		desc = "fw_upload";
+		break;
+	case MPI2_FUNCTION_RAID_ACTION:
+		desc = "raid_action";
+		break;
+	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+	{
+		Mpi2SCSIIORequest_t *scsi_request =
+		    (Mpi2SCSIIORequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "raid_pass, cmd(0x%02x), cdb_len(%d)",
+		    scsi_request->CDB.CDB32[0],
+		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+		desc = "sas_iounit_cntl";
+		break;
+	case MPI2_FUNCTION_SATA_PASSTHROUGH:
+		desc = "sata_pass";
+		break;
+	case MPI2_FUNCTION_DIAG_BUFFER_POST:
+		desc = "diag_buffer_post";
+		break;
+	case MPI2_FUNCTION_DIAG_RELEASE:
+		desc = "diag_release";
+		break;
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+		desc = "smp_passthrough";
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	pr_info(MPT3SAS_FMT "%s: %s, smid(%d)\n",
+	    ioc->name, calling_function_name, desc, smid);
+
+	if (!mpi_reply)
+		return;
+
+	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
+		pr_info(MPT3SAS_FMT
+		    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo));
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    mpi_request->Function ==
+	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+		Mpi2SCSIIOReply_t *scsi_reply =
+		    (Mpi2SCSIIOReply_t *)mpi_reply;
+		struct _sas_device *sas_device = NULL;
+		unsigned long flags;
+
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _ctl_sas_device_find_by_handle(ioc,
+		    le16_to_cpu(scsi_reply->DevHandle));
+		if (sas_device) {
+			pr_warn(MPT3SAS_FMT "\tsas_address(0x%016llx), phy(%d)\n",
+				ioc->name, (unsigned long long)
+			    sas_device->sas_address, sas_device->phy);
+			pr_warn(MPT3SAS_FMT
+			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+			    ioc->name, (unsigned long long)
+			    sas_device->enclosure_logical_id, sas_device->slot);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
+			pr_info(MPT3SAS_FMT
+			    "\tscsi_state(0x%02x), scsi_status"
+			    "(0x%02x)\n", ioc->name,
+			    scsi_reply->SCSIState,
+			    scsi_reply->SCSIStatus);
+	}
+}
+
+#endif
+
+/**
+ * mpt3sas_ctl_done - ctl module completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using ioc->ctl_cb_idx.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	Mpi2SCSIIOReply_t *scsiio_reply;
+	const void *sense_data;
+	u32 sz;
+
+	if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->ctl_cmds.smid != smid)
+		return 1;
+	ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+		ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID;
+		/* get sense data */
+		if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+		    mpi_reply->Function ==
+		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+			scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
+			if (scsiio_reply->SCSIState &
+			    MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+				sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
+				    le32_to_cpu(scsiio_reply->SenseCount));
+				sense_data = mpt3sas_base_get_sense_buffer(ioc,
+				    smid);
+				memcpy(ioc->ctl_cmds.sense, sense_data, sz);
+			}
+		}
+	}
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
+#endif
+	ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->ctl_cmds.done);
+	return 1;
+}
+
+/**
+ * _ctl_check_event_type - determines when an event needs logging
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The bitmask in ioc->event_type[] indicates which events should be
+ * be saved in the driver event_log.  This bitmask is set by application.
+ *
+ * Returns 1 when event should be captured, or zero means no match.
+ */
+static int
+_ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+	u16 i;
+	u32 desired_event;
+
+	if (event >= 128 || !event || !ioc->event_log)
+		return 0;
+
+	desired_event = (1 << (event % 32));
+	if (!desired_event)
+		desired_event = 1;
+	i = event / 32;
+	return desired_event & ioc->event_type[i];
+}
+
+/**
+ * mpt3sas_ctl_add_to_event_log - add event
+ * @ioc: per adapter object
+ * @mpi_reply: reply message frame
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply)
+{
+	struct MPT3_IOCTL_EVENTS *event_log;
+	u16 event;
+	int i;
+	u32 sz, event_data_sz;
+	u8 send_aen = 0;
+
+	if (!ioc->event_log)
+		return;
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	if (_ctl_check_event_type(ioc, event)) {
+
+		/* insert entry into circular event_log */
+		i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE;
+		event_log = ioc->event_log;
+		event_log[i].event = event;
+		event_log[i].context = ioc->event_context++;
+
+		event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
+		sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE);
+		memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE);
+		memcpy(event_log[i].data, mpi_reply->EventData, sz);
+		send_aen = 1;
+	}
+
+	/* This aen_event_read_flag flag is set until the
+	 * application has read the event log.
+	 * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
+	 */
+	if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
+	    (send_aen && !ioc->aen_event_read_flag)) {
+		ioc->aen_event_read_flag = 1;
+		wake_up_interruptible(&ctl_poll_wait);
+		if (async_queue)
+			kill_fasync(&async_queue, SIGIO, POLL_IN);
+	}
+}
+
+/**
+ * mpt3sas_ctl_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
+	return 1;
+}
+
+/**
+ * _ctl_verify_adapter - validates ioc_number passed from application
+ * @ioc: per adapter object
+ * @iocpp: The ioc pointer is returned in this.
+ *
+ * Return (-1) means error, else ioc_number.
+ */
+static int
+_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+		if (ioc->id != ioc_number)
+			continue;
+		*iocpp = ioc;
+		return ioc_number;
+	}
+	*iocpp = NULL;
+	return -1;
+}
+
+/**
+ * mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
+ * MPT3_IOC_DONE_RESET
+ */
+void
+mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
+{
+	int i;
+	u8 issue_reset;
+
+	switch (reset_phase) {
+	case MPT3_IOC_PRE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!(ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_REGISTERED))
+				continue;
+			if ((ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_RELEASED))
+				continue;
+			mpt3sas_send_diag_release(ioc, i, &issue_reset);
+		}
+		break;
+	case MPT3_IOC_AFTER_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+		if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) {
+			ioc->ctl_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
+			complete(&ioc->ctl_cmds.done);
+		}
+		break;
+	case MPT3_IOC_DONE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!(ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_REGISTERED))
+				continue;
+			if ((ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_RELEASED))
+				continue;
+			ioc->diag_buffer_status[i] |=
+			    MPT3_DIAG_BUFFER_IS_DIAG_RESET;
+		}
+		break;
+	}
+}
+
+/**
+ * _ctl_fasync -
+ * @fd -
+ * @filep -
+ * @mode -
+ *
+ * Called when application request fasyn callback handler.
+ */
+static int
+_ctl_fasync(int fd, struct file *filep, int mode)
+{
+	return fasync_helper(fd, filep, mode, &async_queue);
+}
+
+/**
+ * _ctl_release -
+ * @inode -
+ * @filep -
+ *
+ * Called when application releases the fasyn callback handler.
+ */
+static int
+_ctl_release(struct inode *inode, struct file *filep)
+{
+	return fasync_helper(-1, filep, 0, &async_queue);
+}
+
+/**
+ * _ctl_poll -
+ * @file -
+ * @wait -
+ *
+ */
+static unsigned int
+_ctl_poll(struct file *filep, poll_table *wait)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+
+	poll_wait(filep, &ctl_poll_wait, wait);
+
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+		if (ioc->aen_event_read_flag)
+			return POLLIN | POLLRDNORM;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_set_task_mid - assign an active smid to tm request
+ * @ioc: per adapter object
+ * @karg - (struct mpt3_ioctl_command)
+ * @tm_request - pointer to mf from user space
+ *
+ * Returns 0 when an smid if found, else fail.
+ * during failure, the reply frame is filled.
+ */
+static int
+_ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg,
+	Mpi2SCSITaskManagementRequest_t *tm_request)
+{
+	u8 found = 0;
+	u16 i;
+	u16 handle;
+	struct scsi_cmnd *scmd;
+	struct MPT3SAS_DEVICE *priv_data;
+	unsigned long flags;
+	Mpi2SCSITaskManagementReply_t *tm_reply;
+	u32 sz;
+	u32 lun;
+	char *desc = NULL;
+
+	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		desc = "abort_task";
+	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		desc = "query_task";
+	else
+		return 0;
+
+	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
+
+	handle = le16_to_cpu(tm_request->DevHandle);
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	for (i = ioc->scsiio_depth; i && !found; i--) {
+		scmd = ioc->scsi_lookup[i - 1].scmd;
+		if (scmd == NULL || scmd->device == NULL ||
+		    scmd->device->hostdata == NULL)
+			continue;
+		if (lun != scmd->device->lun)
+			continue;
+		priv_data = scmd->device->hostdata;
+		if (priv_data->sas_target == NULL)
+			continue;
+		if (priv_data->sas_target->handle != handle)
+			continue;
+		tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
+		found = 1;
+	}
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	if (!found) {
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: handle(0x%04x), lun(%d), no active mid!!\n",
+			ioc->name,
+		    desc, le16_to_cpu(tm_request->DevHandle), lun));
+		tm_reply = ioc->ctl_cmds.reply;
+		tm_reply->DevHandle = tm_request->DevHandle;
+		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+		tm_reply->TaskType = tm_request->TaskType;
+		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
+		tm_reply->VP_ID = tm_request->VP_ID;
+		tm_reply->VF_ID = tm_request->VF_ID;
+		sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
+		if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+		    sz))
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+		return 1;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
+	    desc, le16_to_cpu(tm_request->DevHandle), lun,
+	     le16_to_cpu(tm_request->TaskMID)));
+	return 0;
+}
+
+/**
+ * _ctl_do_mpt_command - main handler for MPT3COMMAND opcode
+ * @ioc: per adapter object
+ * @karg - (struct mpt3_ioctl_command)
+ * @mf - pointer to mf in user space
+ */
+static long
+_ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
+	void __user *mf)
+{
+	MPI2RequestHeader_t *mpi_request = NULL, *request;
+	MPI2DefaultReply_t *mpi_reply;
+	u32 ioc_state;
+	u16 ioc_status;
+	u16 smid;
+	unsigned long timeout, timeleft;
+	u8 issue_reset;
+	u32 sz;
+	void *psge;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma = 0;
+	size_t data_out_sz = 0;
+	void *data_in = NULL;
+	dma_addr_t data_in_dma = 0;
+	size_t data_in_sz = 0;
+	long ret;
+	u16 wait_state_count;
+
+	issue_reset = 0;
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n",
+		    ioc->name, __func__);
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			ret = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name,
+		    __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
+	if (!mpi_request) {
+		pr_err(MPT3SAS_FMT
+			"%s: failed obtaining a memory for mpi_request\n",
+			ioc->name, __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Check for overflow and wraparound */
+	if (karg.data_sge_offset * 4 > ioc->request_sz ||
+	    karg.data_sge_offset > (UINT_MAX / 4)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* copy in request message frame from user */
+	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,
+		    __func__);
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+		smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
+		if (!smid) {
+			pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+			    ioc->name, __func__);
+			ret = -EAGAIN;
+			goto out;
+		}
+	} else {
+
+		smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
+		if (!smid) {
+			pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+			    ioc->name, __func__);
+			ret = -EAGAIN;
+			goto out;
+		}
+	}
+
+	ret = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memcpy(request, mpi_request, karg.data_sge_offset*4);
+	ioc->ctl_cmds.smid = smid;
+	data_out_sz = karg.data_out_size;
+	data_in_sz = karg.data_in_size;
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+		if (!le16_to_cpu(mpi_request->FunctionDependent1) ||
+		    le16_to_cpu(mpi_request->FunctionDependent1) >
+		    ioc->facts.MaxDevHandle) {
+			ret = -EINVAL;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	/* obtain dma-able memory for data transfer */
+	if (data_out_sz) /* WRITE */ {
+		data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
+		    &data_out_dma);
+		if (!data_out) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENOMEM;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+		if (copy_from_user(data_out, karg.data_out_buf_ptr,
+			data_out_sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret =  -EFAULT;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	if (data_in_sz) /* READ */ {
+		data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
+		    &data_in_dma);
+		if (!data_in) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENOMEM;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	psge = (void *)request + (karg.data_sge_offset*4);
+
+	/* send command to firmware */
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
+#endif
+
+	init_completion(&ioc->ctl_cmds.done);
+	switch (mpi_request->Function) {
+	case MPI2_FUNCTION_SCSI_IO_REQUEST:
+	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+	{
+		Mpi2SCSIIORequest_t *scsiio_request =
+		    (Mpi2SCSIIORequest_t *)request;
+		scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+		scsiio_request->SenseBufferLowAddress =
+		    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+		memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+
+		if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
+			mpt3sas_base_put_smid_scsi_io(ioc, smid,
+			    le16_to_cpu(mpi_request->FunctionDependent1));
+		else
+			mpt3sas_base_put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+	{
+		Mpi2SCSITaskManagementRequest_t *tm_request =
+		    (Mpi2SCSITaskManagementRequest_t *)request;
+
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
+			ioc->name,
+		    le16_to_cpu(tm_request->DevHandle), tm_request->TaskType));
+
+		if (tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+		    tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
+				mpt3sas_base_free_smid(ioc, smid);
+				goto out;
+			}
+		}
+
+		mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu(
+		    tm_request->DevHandle));
+		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+		mpt3sas_base_put_smid_hi_priority(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+	{
+		Mpi2SmpPassthroughRequest_t *smp_request =
+		    (Mpi2SmpPassthroughRequest_t *)mpi_request;
+		u8 *data;
+
+		/* ioc determines which port to use */
+		smp_request->PhysicalPort = 0xFF;
+		if (smp_request->PassthroughFlags &
+		    MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
+			data = (u8 *)&smp_request->SGL;
+		else {
+			if (unlikely(data_out == NULL)) {
+				pr_err("failure at %s:%d/%s()!\n",
+				    __FILE__, __LINE__, __func__);
+				mpt3sas_base_free_smid(ioc, smid);
+				ret = -EINVAL;
+				goto out;
+			}
+			data = data_out;
+		}
+
+		if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
+			ioc->ioc_link_reset_in_progress = 1;
+			ioc->ignore_loginfos = 1;
+		}
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+		    data_in_sz);
+		mpt3sas_base_put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SATA_PASSTHROUGH:
+	case MPI2_FUNCTION_FW_DOWNLOAD:
+	case MPI2_FUNCTION_FW_UPLOAD:
+	{
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+		    data_in_sz);
+		mpt3sas_base_put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_TOOLBOX:
+	{
+		Mpi2ToolboxCleanRequest_t *toolbox_request =
+			(Mpi2ToolboxCleanRequest_t *)mpi_request;
+
+		if (toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL) {
+			ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
+				data_in_dma, data_in_sz);
+		} else {
+			ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+				data_in_dma, data_in_sz);
+		}
+		mpt3sas_base_put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+	{
+		Mpi2SasIoUnitControlRequest_t *sasiounit_request =
+		    (Mpi2SasIoUnitControlRequest_t *)mpi_request;
+
+		if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
+		    || sasiounit_request->Operation ==
+		    MPI2_SAS_OP_PHY_LINK_RESET) {
+			ioc->ioc_link_reset_in_progress = 1;
+			ioc->ignore_loginfos = 1;
+		}
+		/* drop to default case for posting the request */
+	}
+	default:
+		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+		mpt3sas_base_put_smid_default(ioc, smid);
+		break;
+	}
+
+	if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT)
+		timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
+	else
+		timeout = karg.timeout;
+	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    timeout*HZ);
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+		Mpi2SCSITaskManagementRequest_t *tm_request =
+		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
+		mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
+		    tm_request->DevHandle));
+		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+	} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
+	    mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
+		ioc->ioc_link_reset_in_progress) {
+		ioc->ioc_link_reset_in_progress = 0;
+		ioc->ignore_loginfos = 0;
+	}
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name,
+		    __func__);
+		_debug_dump_mf(mpi_request, karg.data_sge_offset);
+		if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
+	    (ioc->logging_level & MPT_DEBUG_TM)) {
+		Mpi2SCSITaskManagementReply_t *tm_reply =
+		    (Mpi2SCSITaskManagementReply_t *)mpi_reply;
+
+		pr_info(MPT3SAS_FMT "TASK_MGMT: " \
+		    "IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
+		    "TerminationCount(0x%08x)\n", ioc->name,
+		    le16_to_cpu(tm_reply->IOCStatus),
+		    le32_to_cpu(tm_reply->IOCLogInfo),
+		    le32_to_cpu(tm_reply->TerminationCount));
+	}
+#endif
+	/* copy out xdata to user */
+	if (data_in_sz) {
+		if (copy_to_user(karg.data_in_buf_ptr, data_in,
+		    data_in_sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+	/* copy out reply message frame to user */
+	if (karg.max_reply_bytes) {
+		sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
+		if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+		    sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+	/* copy out sense to user */
+	if (karg.max_sense_bytes && (mpi_request->Function ==
+	    MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
+	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
+		sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
+		if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
+		    sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+ issue_host_reset:
+	if (issue_reset) {
+		ret = -ENODATA;
+		if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+		    mpi_request->Function ==
+		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+		    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
+			pr_info(MPT3SAS_FMT "issue target reset: handle = (0x%04x)\n",
+				ioc->name,
+				le16_to_cpu(mpi_request->FunctionDependent1));
+			mpt3sas_halt_firmware(ioc);
+			mpt3sas_scsih_issue_tm(ioc,
+			    le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
+			    0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30,
+			    0, TM_MUTEX_ON);
+		} else
+			mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+			    FORCE_BIG_HAMMER);
+	}
+
+ out:
+
+	/* free memory associated with sg buffers */
+	if (data_in)
+		pci_free_consistent(ioc->pdev, data_in_sz, data_in,
+		    data_in_dma);
+
+	if (data_out)
+		pci_free_consistent(ioc->pdev, data_out_sz, data_out,
+		    data_out_dma);
+
+	kfree(mpi_request);
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return ret;
+}
+
+/**
+ * _ctl_getiocinfo - main handler for MPT3IOCINFO opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_iocinfo karg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	memset(&karg, 0 , sizeof(karg));
+	karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
+	if (ioc->pfacts)
+		karg.port_number = ioc->pfacts[0].PortNumber;
+	karg.hw_rev = ioc->pdev->revision;
+	karg.pci_id = ioc->pdev->device;
+	karg.subsystem_device = ioc->pdev->subsystem_device;
+	karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
+	karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
+	karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
+	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
+	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
+	karg.firmware_version = ioc->facts.FWVersion.Word;
+	strcpy(karg.driver_version, MPT3SAS_DRIVER_NAME);
+	strcat(karg.driver_version, "-");
+	strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventquery - main handler for MPT3EVENTQUERY opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventquery karg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE;
+	memcpy(karg.event_types, ioc->event_type,
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventenable - main handler for MPT3EVENTENABLE opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventenable karg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	memcpy(ioc->event_type, karg.event_types,
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+	mpt3sas_base_validate_event_type(ioc, ioc->event_type);
+
+	if (ioc->event_log)
+		return 0;
+	/* initialize event_log */
+	ioc->event_context = 0;
+	ioc->aen_event_read_flag = 0;
+	ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE,
+	    sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL);
+	if (!ioc->event_log) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventreport - main handler for MPT3EVENTREPORT opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventreport karg;
+	u32 number_bytes, max_events, max;
+	struct mpt3_ioctl_eventreport __user *uarg = arg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	number_bytes = karg.hdr.max_data_size -
+	    sizeof(struct mpt3_ioctl_header);
+	max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS);
+	max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events);
+
+	/* If fewer than 1 event is requested, there must have
+	 * been some type of error.
+	 */
+	if (!max || !ioc->event_log)
+		return -ENODATA;
+
+	number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS);
+	if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	/* reset flag so SIGIO can restart */
+	ioc->aen_event_read_flag = 0;
+	return 0;
+}
+
+/**
+ * _ctl_do_reset - main handler for MPT3HARDRESET opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_diag_reset karg;
+	int retval;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+	    ioc->is_driver_loading)
+		return -EAGAIN;
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
+	    __func__));
+
+	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+	    FORCE_BIG_HAMMER);
+	pr_info(MPT3SAS_FMT "host reset: %s\n",
+	    ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
+	return 0;
+}
+
+/**
+ * _ctl_btdh_search_sas_device - searching for sas device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->sas_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+		    btdh->handle == sas_device->handle) {
+			btdh->bus = sas_device->channel;
+			btdh->id = sas_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == sas_device->channel && btdh->id ==
+		    sas_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = sas_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_btdh_search_raid_device - searching for raid device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->raid_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+		    btdh->handle == raid_device->handle) {
+			btdh->bus = raid_device->channel;
+			btdh->id = raid_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == raid_device->channel && btdh->id ==
+		    raid_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = raid_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_btdh_mapping karg;
+	int rc;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	rc = _ctl_btdh_search_sas_device(ioc, &karg);
+	if (!rc)
+		_ctl_btdh_search_raid_device(ioc, &karg);
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_diag_capability - return diag buffer capability
+ * @ioc: per adapter object
+ * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
+ *
+ * returns 1 when diag buffer support is enabled in firmware
+ */
+static u8
+_ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type)
+{
+	u8 rc = 0;
+
+	switch (buffer_type) {
+	case MPI2_DIAG_BUF_TYPE_TRACE:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
+			rc = 1;
+		break;
+	case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
+			rc = 1;
+		break;
+	case MPI2_DIAG_BUF_TYPE_EXTENDED:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
+			rc = 1;
+	}
+
+	return rc;
+}
+
+
+/**
+ * _ctl_diag_register_2 - wrapper for registering diag buffer support
+ * @ioc: per adapter object
+ * @diag_register: the diag_register struct passed in from user space
+ *
+ */
+static long
+_ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_diag_register *diag_register)
+{
+	int rc, i;
+	void *request_data = NULL;
+	dma_addr_t request_data_dma;
+	u32 request_data_sz = 0;
+	Mpi2DiagBufferPostRequest_t *mpi_request;
+	Mpi2DiagBufferPostReply_t *mpi_reply;
+	u8 buffer_type;
+	unsigned long timeleft;
+	u16 smid;
+	u16 ioc_status;
+	u32 ioc_state;
+	u8 issue_reset = 0;
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		pr_err(MPT3SAS_FMT
+		    "%s: failed due to ioc not operational\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	buffer_type = diag_register->buffer_type;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have capability for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) {
+		pr_err(MPT3SAS_FMT
+			"%s: already has a registered buffer for buffer_type(0x%02x)\n",
+			ioc->name, __func__,
+		    buffer_type);
+		return -EINVAL;
+	}
+
+	if (diag_register->requested_buffer_size % 4)  {
+		pr_err(MPT3SAS_FMT
+			"%s: the requested_buffer_size is not 4 byte aligned\n",
+			ioc->name, __func__);
+		return -EINVAL;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->ctl_cmds.smid = smid;
+
+	request_data = ioc->diag_buffer[buffer_type];
+	request_data_sz = diag_register->requested_buffer_size;
+	ioc->unique_id[buffer_type] = diag_register->unique_id;
+	ioc->diag_buffer_status[buffer_type] = 0;
+	memcpy(ioc->product_specific[buffer_type],
+	    diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS);
+	ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
+
+	if (request_data) {
+		request_data_dma = ioc->diag_buffer_dma[buffer_type];
+		if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
+			pci_free_consistent(ioc->pdev,
+			    ioc->diag_buffer_sz[buffer_type],
+			    request_data, request_data_dma);
+			request_data = NULL;
+		}
+	}
+
+	if (request_data == NULL) {
+		ioc->diag_buffer_sz[buffer_type] = 0;
+		ioc->diag_buffer_dma[buffer_type] = 0;
+		request_data = pci_alloc_consistent(
+			ioc->pdev, request_data_sz, &request_data_dma);
+		if (request_data == NULL) {
+			pr_err(MPT3SAS_FMT "%s: failed allocating memory" \
+			    " for diag buffers, requested size(%d)\n",
+			    ioc->name, __func__, request_data_sz);
+			mpt3sas_base_free_smid(ioc, smid);
+			return -ENOMEM;
+		}
+		ioc->diag_buffer[buffer_type] = request_data;
+		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
+		ioc->diag_buffer_dma[buffer_type] = request_data_dma;
+	}
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+	mpi_request->BufferType = diag_register->buffer_type;
+	mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
+	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
+	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
+		ioc->name, __func__, request_data,
+	    (unsigned long long)request_data_dma,
+	    le32_to_cpu(mpi_request->BufferLength)));
+
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		mpi_request->ProductSpecific[i] =
+			cpu_to_le32(ioc->product_specific[buffer_type][i]);
+
+	init_completion(&ioc->ctl_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name,
+		    __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
+		if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		pr_err(MPT3SAS_FMT "%s: no reply message\n",
+		    ioc->name, __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+			MPT3_DIAG_BUFFER_IS_REGISTERED;
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n",
+		    ioc->name, __func__));
+	} else {
+		pr_info(MPT3SAS_FMT
+			"%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			ioc->name, __func__,
+		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+
+ out:
+
+	if (rc && request_data)
+		pci_free_consistent(ioc->pdev, request_data_sz,
+		    request_data, request_data_dma);
+
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time
+ * @ioc: per adapter object
+ * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
+ *
+ * This is called when command line option diag_buffer_enable is enabled
+ * at driver load time.
+ */
+void
+mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register)
+{
+	struct mpt3_diag_register diag_register;
+
+	memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
+
+	if (bits_to_register & 1) {
+		pr_info(MPT3SAS_FMT "registering trace buffer support\n",
+		    ioc->name);
+		ioc->diag_trigger_master.MasterData =
+		    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
+		/* register for 2MB buffers  */
+		diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		diag_register.unique_id = 0x7075900;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	}
+
+	if (bits_to_register & 2) {
+		pr_info(MPT3SAS_FMT "registering snapshot buffer support\n",
+		    ioc->name);
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
+		/* register for 2MB buffers  */
+		diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		diag_register.unique_id = 0x7075901;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	}
+
+	if (bits_to_register & 4) {
+		pr_info(MPT3SAS_FMT "registering extended buffer support\n",
+		    ioc->name);
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
+		/* register for 2MB buffers  */
+		diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		diag_register.unique_id = 0x7075901;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	}
+}
+
+/**
+ * _ctl_diag_register - application register with driver
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+static long
+_ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_register karg;
+	long rc;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	rc = _ctl_diag_register_2(ioc, &karg);
+	return rc;
+}
+
+/**
+ * _ctl_diag_unregister - application unregister with driver
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+static long
+_ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_unregister karg;
+	void *request_data;
+	dma_addr_t request_data_dma;
+	u32 request_data_sz;
+	u8 buffer_type;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	buffer_type = karg.unique_id & 0x000000ff;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have capability for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) is not registered\n",
+			ioc->name, __func__, buffer_type);
+		return -EINVAL;
+	}
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) has not been released\n",
+			ioc->name, __func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		pr_err(MPT3SAS_FMT
+			"%s: unique_id(0x%08x) is not registered\n",
+			ioc->name, __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	request_data_sz = ioc->diag_buffer_sz[buffer_type];
+	request_data_dma = ioc->diag_buffer_dma[buffer_type];
+	pci_free_consistent(ioc->pdev, request_data_sz,
+	    request_data, request_data_dma);
+	ioc->diag_buffer[buffer_type] = NULL;
+	ioc->diag_buffer_status[buffer_type] = 0;
+	return 0;
+}
+
+/**
+ * _ctl_diag_query - query relevant info associated with diag buffers
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+static long
+_ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_query karg;
+	void *request_data;
+	int i;
+	u8 buffer_type;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	karg.application_flags = 0;
+	buffer_type = karg.buffer_type;
+
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have capability for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) is not registered\n",
+			ioc->name, __func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id & 0xffffff00) {
+		if (karg.unique_id != ioc->unique_id[buffer_type]) {
+			pr_err(MPT3SAS_FMT
+				"%s: unique_id(0x%08x) is not registered\n",
+				ioc->name, __func__, karg.unique_id);
+			return -EINVAL;
+		}
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have buffer for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] & MPT3_DIAG_BUFFER_IS_RELEASED)
+		karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED |
+		    MPT3_APP_FLAGS_BUFFER_VALID);
+	else
+		karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED |
+		    MPT3_APP_FLAGS_BUFFER_VALID |
+		    MPT3_APP_FLAGS_FW_BUFFER_ACCESS);
+
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		karg.product_specific[i] =
+		    ioc->product_specific[buffer_type][i];
+
+	karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
+	karg.driver_added_buffer_size = 0;
+	karg.unique_id = ioc->unique_id[buffer_type];
+	karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
+
+	if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) {
+		pr_err(MPT3SAS_FMT
+			"%s: unable to write mpt3_diag_query data @ %p\n",
+			ioc->name, __func__, arg);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_send_diag_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @issue_reset - specifies whether host reset is required.
+ *
+ */
+int
+mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
+	u8 *issue_reset)
+{
+	Mpi2DiagReleaseRequest_t *mpi_request;
+	Mpi2DiagReleaseReply_t *mpi_reply;
+	u16 smid;
+	u16 ioc_status;
+	u32 ioc_state;
+	int rc;
+	unsigned long timeleft;
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	rc = 0;
+	*issue_reset = 0;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (ioc->diag_buffer_status[buffer_type] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED)
+			ioc->diag_buffer_status[buffer_type] |=
+			    MPT3_DIAG_BUFFER_IS_RELEASED;
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: skipping due to FAULT state\n", ioc->name,
+		    __func__));
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->ctl_cmds.smid = smid;
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
+	mpi_request->BufferType = buffer_type;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	init_completion(&ioc->ctl_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name,
+		    __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2DiagReleaseRequest_t)/4);
+		if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET))
+			*issue_reset = 1;
+		rc = -EFAULT;
+		goto out;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		pr_err(MPT3SAS_FMT "%s: no reply message\n",
+		    ioc->name, __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_RELEASED;
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n",
+		    ioc->name, __func__));
+	} else {
+		pr_info(MPT3SAS_FMT
+			"%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			ioc->name, __func__,
+		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ out:
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_release karg;
+	void *request_data;
+	int rc;
+	u8 buffer_type;
+	u8 issue_reset = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	buffer_type = karg.unique_id & 0x000000ff;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have capability for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) is not registered\n",
+			ioc->name, __func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		pr_err(MPT3SAS_FMT
+			"%s: unique_id(0x%08x) is not registered\n",
+			ioc->name, __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) is already released\n",
+			ioc->name, __func__,
+		    buffer_type);
+		return 0;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+
+	if (!request_data) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	/* buffers were released by due to host reset */
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DIAG_RESET)) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_RELEASED;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_DIAG_RESET;
+		pr_err(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) was released due to host reset\n",
+			ioc->name, __func__, buffer_type);
+		return 0;
+	}
+
+	rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
+
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+
+	return rc;
+}
+
+/**
+ * _ctl_diag_read_buffer - request for copy of the diag buffer
+ * @ioc: per adapter object
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_read_buffer karg;
+	struct mpt3_diag_read_buffer __user *uarg = arg;
+	void *request_data, *diag_data;
+	Mpi2DiagBufferPostRequest_t *mpi_request;
+	Mpi2DiagBufferPostReply_t *mpi_reply;
+	int rc, i;
+	u8 buffer_type;
+	unsigned long timeleft, request_size, copy_size;
+	u16 smid;
+	u16 ioc_status;
+	u8 issue_reset = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+	    __func__));
+
+	buffer_type = karg.unique_id & 0x000000ff;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have capability for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		pr_err(MPT3SAS_FMT
+			"%s: unique_id(0x%08x) is not registered\n",
+			ioc->name, __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		pr_err(MPT3SAS_FMT
+			"%s: doesn't have buffer for buffer_type(0x%02x)\n",
+			ioc->name, __func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	request_size = ioc->diag_buffer_sz[buffer_type];
+
+	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
+		pr_err(MPT3SAS_FMT "%s: either the starting_offset " \
+		    "or bytes_to_read are not 4 byte aligned\n", ioc->name,
+		    __func__);
+		return -EINVAL;
+	}
+
+	if (karg.starting_offset > request_size)
+		return -EINVAL;
+
+	diag_data = (void *)(request_data + karg.starting_offset);
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: diag_buffer(%p), offset(%d), sz(%d)\n",
+		ioc->name, __func__,
+	    diag_data, karg.starting_offset, karg.bytes_to_read));
+
+	/* Truncate data on requests that are too large */
+	if ((diag_data + karg.bytes_to_read < diag_data) ||
+	    (diag_data + karg.bytes_to_read > request_data + request_size))
+		copy_size = request_size - karg.starting_offset;
+	else
+		copy_size = karg.bytes_to_read;
+
+	if (copy_to_user((void __user *)uarg->diagnostic_data,
+	    diag_data, copy_size)) {
+		pr_err(MPT3SAS_FMT
+			"%s: Unable to write mpt_diag_read_buffer_t data @ %p\n",
+			ioc->name, __func__, diag_data);
+		return -EFAULT;
+	}
+
+	if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0)
+		return 0;
+
+	dctlprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: Reregister buffer_type(0x%02x)\n",
+		ioc->name, __func__, buffer_type));
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: buffer_type(0x%02x) is still registered\n",
+			ioc->name, __func__, buffer_type));
+		return 0;
+	}
+	/* Get a free request frame and save the message context.
+	*/
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: ctl_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->ctl_cmds.smid = smid;
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+	mpi_request->BufferType = buffer_type;
+	mpi_request->BufferLength =
+	    cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
+	mpi_request->BufferAddress =
+	    cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		mpi_request->ProductSpecific[i] =
+			cpu_to_le32(ioc->product_specific[buffer_type][i]);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	init_completion(&ioc->ctl_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n", ioc->name,
+		    __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
+		if (!(ioc->ctl_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		pr_err(MPT3SAS_FMT "%s: no reply message\n",
+		    ioc->name, __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_REGISTERED;
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: success\n",
+		    ioc->name, __func__));
+	} else {
+		pr_info(MPT3SAS_FMT
+			"%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			ioc->name, __func__,
+		    ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+
+ out:
+
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+
+
+#ifdef CONFIG_COMPAT
+/**
+ * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
+ * @ioc: per adapter object
+ * @cmd - ioctl opcode
+ * @arg - (struct mpt3_ioctl_command32)
+ *
+ * MPT3COMMAND32 - Handle 32bit applications running on 64bit os.
+ */
+static long
+_ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
+	void __user *arg)
+{
+	struct mpt3_ioctl_command32 karg32;
+	struct mpt3_ioctl_command32 __user *uarg;
+	struct mpt3_ioctl_command karg;
+
+	if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32))
+		return -EINVAL;
+
+	uarg = (struct mpt3_ioctl_command32 __user *) arg;
+
+	if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	memset(&karg, 0, sizeof(struct mpt3_ioctl_command));
+	karg.hdr.ioc_number = karg32.hdr.ioc_number;
+	karg.hdr.port_number = karg32.hdr.port_number;
+	karg.hdr.max_data_size = karg32.hdr.max_data_size;
+	karg.timeout = karg32.timeout;
+	karg.max_reply_bytes = karg32.max_reply_bytes;
+	karg.data_in_size = karg32.data_in_size;
+	karg.data_out_size = karg32.data_out_size;
+	karg.max_sense_bytes = karg32.max_sense_bytes;
+	karg.data_sge_offset = karg32.data_sge_offset;
+	karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
+	karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
+	karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
+	karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
+	return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
+}
+#endif
+
+/**
+ * _ctl_ioctl_main - main ioctl entry point
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ * compat - handles 32 bit applications in 64bit os
+ */
+static long
+_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
+	u8 compat)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	struct mpt3_ioctl_header ioctl_header;
+	enum block_state state;
+	long ret = -EINVAL;
+
+	/* get IOCTL header */
+	if (copy_from_user(&ioctl_header, (char __user *)arg,
+	    sizeof(struct mpt3_ioctl_header))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc)
+		return -ENODEV;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+	    ioc->is_driver_loading)
+		return -EAGAIN;
+
+	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
+	if (state == NON_BLOCKING) {
+		if (!mutex_trylock(&ioc->ctl_cmds.mutex))
+			return -EAGAIN;
+	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+		return -ERESTARTSYS;
+
+
+	switch (cmd) {
+	case MPT3IOCINFO:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo))
+			ret = _ctl_getiocinfo(ioc, arg);
+		break;
+#ifdef CONFIG_COMPAT
+	case MPT3COMMAND32:
+#endif
+	case MPT3COMMAND:
+	{
+		struct mpt3_ioctl_command __user *uarg;
+		struct mpt3_ioctl_command karg;
+
+#ifdef CONFIG_COMPAT
+		if (compat) {
+			ret = _ctl_compat_mpt_command(ioc, cmd, arg);
+			break;
+		}
+#endif
+		if (copy_from_user(&karg, arg, sizeof(karg))) {
+			pr_err("failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			ret = -EFAULT;
+			break;
+		}
+
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) {
+			uarg = arg;
+			ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
+		}
+		break;
+	}
+	case MPT3EVENTQUERY:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery))
+			ret = _ctl_eventquery(ioc, arg);
+		break;
+	case MPT3EVENTENABLE:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable))
+			ret = _ctl_eventenable(ioc, arg);
+		break;
+	case MPT3EVENTREPORT:
+		ret = _ctl_eventreport(ioc, arg);
+		break;
+	case MPT3HARDRESET:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset))
+			ret = _ctl_do_reset(ioc, arg);
+		break;
+	case MPT3BTDHMAPPING:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping))
+			ret = _ctl_btdh_mapping(ioc, arg);
+		break;
+	case MPT3DIAGREGISTER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register))
+			ret = _ctl_diag_register(ioc, arg);
+		break;
+	case MPT3DIAGUNREGISTER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister))
+			ret = _ctl_diag_unregister(ioc, arg);
+		break;
+	case MPT3DIAGQUERY:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query))
+			ret = _ctl_diag_query(ioc, arg);
+		break;
+	case MPT3DIAGRELEASE:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release))
+			ret = _ctl_diag_release(ioc, arg);
+		break;
+	case MPT3DIAGREADBUFFER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
+			ret = _ctl_diag_read_buffer(ioc, arg);
+		break;
+	default:
+		dctlprintk(ioc, pr_info(MPT3SAS_FMT
+		    "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
+		break;
+	}
+
+	mutex_unlock(&ioc->ctl_cmds.mutex);
+	return ret;
+}
+
+/**
+ * _ctl_ioctl - main ioctl entry point (unlocked)
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ */
+static long
+_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0);
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+/**
+ * _ctl_ioctl_compat - main ioctl entry point (compat)
+ * @file -
+ * @cmd -
+ * @arg -
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+static long
+_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+	long ret;
+
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1);
+	return ret;
+}
+#endif
+
+/* scsi host attributes */
+/**
+ * _ctl_version_fw_show - firmware version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+	    ioc->facts.FWVersion.Word & 0x000000FF);
+}
+static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
+
+/**
+ * _ctl_version_bios_show - bios version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+	    (version & 0xFF000000) >> 24,
+	    (version & 0x00FF0000) >> 16,
+	    (version & 0x0000FF00) >> 8,
+	    version & 0x000000FF);
+}
+static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
+
+/**
+ * _ctl_version_mpi_show - MPI (message passing interface) version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
+	    ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
+}
+static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
+
+/**
+ * _ctl_version_product_show - product name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
+}
+static DEVICE_ATTR(version_product, S_IRUGO, _ctl_version_product_show, NULL);
+
+/**
+ * _ctl_version_nvdata_persistent_show - ndvata persistent version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_nvdata_persistent_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n",
+	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
+}
+static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
+	_ctl_version_nvdata_persistent_show, NULL);
+
+/**
+ * _ctl_version_nvdata_default_show - nvdata default version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_nvdata_default_show(struct device *cdev, struct device_attribute
+	*attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n",
+	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
+}
+static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
+	_ctl_version_nvdata_default_show, NULL);
+
+/**
+ * _ctl_board_name_show - board name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
+}
+static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
+
+/**
+ * _ctl_board_assembly_show - board assembly name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
+}
+static DEVICE_ATTR(board_assembly, S_IRUGO, _ctl_board_assembly_show, NULL);
+
+/**
+ * _ctl_board_tracer_show - board tracer number
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
+}
+static DEVICE_ATTR(board_tracer, S_IRUGO, _ctl_board_tracer_show, NULL);
+
+/**
+ * _ctl_io_delay_show - io missing delay
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
+}
+static DEVICE_ATTR(io_delay, S_IRUGO, _ctl_io_delay_show, NULL);
+
+/**
+ * _ctl_device_delay_show - device missing delay
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
+}
+static DEVICE_ATTR(device_delay, S_IRUGO, _ctl_device_delay_show, NULL);
+
+/**
+ * _ctl_fw_queue_depth_show - global credits
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is firmware queue depth limit
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
+}
+static DEVICE_ATTR(fw_queue_depth, S_IRUGO, _ctl_fw_queue_depth_show, NULL);
+
+/**
+ * _ctl_sas_address_show - sas address
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+	    (unsigned long long)ioc->sas_hba.sas_address);
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+	_ctl_host_sas_address_show, NULL);
+
+/**
+ * _ctl_logging_level_show - logging level
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
+}
+static ssize_t
+_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%x", &val) != 1)
+		return -EINVAL;
+
+	ioc->logging_level = val;
+	pr_info(MPT3SAS_FMT "logging_level=%08xh\n", ioc->name,
+	    ioc->logging_level);
+	return strlen(buf);
+}
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, _ctl_logging_level_show,
+	_ctl_logging_level_store);
+
+/**
+ * _ctl_fwfault_debug_show - show/store fwfault_debug
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * mpt3sas_fwfault_debug is command line option
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_fwfault_debug_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
+}
+static ssize_t
+_ctl_fwfault_debug_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%d", &val) != 1)
+		return -EINVAL;
+
+	ioc->fwfault_debug = val;
+	pr_info(MPT3SAS_FMT "fwfault_debug=%d\n", ioc->name,
+	    ioc->fwfault_debug);
+	return strlen(buf);
+}
+static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR,
+	_ctl_fwfault_debug_show, _ctl_fwfault_debug_store);
+
+/**
+ * _ctl_ioc_reset_count_show - ioc reset count
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is firmware queue depth limit
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count);
+}
+static DEVICE_ATTR(ioc_reset_count, S_IRUGO, _ctl_ioc_reset_count_show, NULL);
+
+/**
+ * _ctl_ioc_reply_queue_count_show - number of reply queues
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_ioc_reply_queue_count_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	u8 reply_queue_count;
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if ((ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
+		reply_queue_count = ioc->reply_queue_count;
+	else
+		reply_queue_count = 1;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
+}
+static DEVICE_ATTR(reply_queue_count, S_IRUGO, _ctl_ioc_reply_queue_count_show,
+	NULL);
+
+struct DIAG_BUFFER_START {
+	__le32	Size;
+	__le32	DiagVersion;
+	u8	BufferType;
+	u8	Reserved[3];
+	__le32	Reserved1;
+	__le32	Reserved2;
+	__le32	Reserved3;
+};
+
+/**
+ * _ctl_host_trace_buffer_size_show - host buffer size (trace only)
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_host_trace_buffer_size_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	u32 size = 0;
+	struct DIAG_BUFFER_START *request_data;
+
+	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
+		pr_err(MPT3SAS_FMT
+			"%s: host_trace_buffer is not registered\n",
+			ioc->name, __func__);
+		return 0;
+	}
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: host_trace_buffer is not registered\n",
+			ioc->name, __func__);
+		return 0;
+	}
+
+	request_data = (struct DIAG_BUFFER_START *)
+	    ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
+	if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
+	    le32_to_cpu(request_data->DiagVersion) == 0x01000000 ||
+	    le32_to_cpu(request_data->DiagVersion) == 0x01010000) &&
+	    le32_to_cpu(request_data->Reserved3) == 0x4742444c)
+		size = le32_to_cpu(request_data->Size);
+
+	ioc->ring_buffer_sz = size;
+	return snprintf(buf, PAGE_SIZE, "%d\n", size);
+}
+static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO,
+	_ctl_host_trace_buffer_size_show, NULL);
+
+/**
+ * _ctl_host_trace_buffer_show - firmware ring buffer (trace only)
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ *
+ * You will only be able to read 4k bytes of ring buffer at a time.
+ * In order to read beyond 4k bytes, you will have to write out the
+ * offset to the same attribute, it will move the pointer.
+ */
+static ssize_t
+_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	void *request_data;
+	u32 size;
+
+	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
+		pr_err(MPT3SAS_FMT
+			"%s: host_trace_buffer is not registered\n",
+			ioc->name, __func__);
+		return 0;
+	}
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		pr_err(MPT3SAS_FMT
+			"%s: host_trace_buffer is not registered\n",
+			ioc->name, __func__);
+		return 0;
+	}
+
+	if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
+		return 0;
+
+	size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
+	size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
+	request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
+	memcpy(buf, request_data, size);
+	return size;
+}
+
+static ssize_t
+_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%d", &val) != 1)
+		return -EINVAL;
+
+	ioc->ring_buffer_offset = val;
+	return strlen(buf);
+}
+static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR,
+	_ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store);
+
+
+/*****************************************/
+
+/**
+ * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only)
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ *
+ * This is a mechnism to post/release host_trace_buffers
+ */
+static ssize_t
+_ctl_host_trace_buffer_enable_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
+	   ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0))
+		return snprintf(buf, PAGE_SIZE, "off\n");
+	else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED))
+		return snprintf(buf, PAGE_SIZE, "release\n");
+	else
+		return snprintf(buf, PAGE_SIZE, "post\n");
+}
+
+static ssize_t
+_ctl_host_trace_buffer_enable_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	char str[10] = "";
+	struct mpt3_diag_register diag_register;
+	u8 issue_reset = 0;
+
+	/* don't allow post/release occurr while recovery is active */
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery || ioc->is_driver_loading)
+		return -EBUSY;
+
+	if (sscanf(buf, "%9s", str) != 1)
+		return -EINVAL;
+
+	if (!strcmp(str, "post")) {
+		/* exit out if host buffers are already posted */
+		if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
+		    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+		    ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_RELEASED) == 0))
+			goto out;
+		memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
+		pr_info(MPT3SAS_FMT "posting host trace buffers\n",
+		    ioc->name);
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
+		diag_register.requested_buffer_size = (1024 * 1024);
+		diag_register.unique_id = 0x7075900;
+		ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	} else if (!strcmp(str, "release")) {
+		/* exit out if host buffers are already released */
+		if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
+			goto out;
+		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)
+			goto out;
+		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_RELEASED))
+			goto out;
+		pr_info(MPT3SAS_FMT "releasing host trace buffer\n",
+		    ioc->name);
+		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
+		    &issue_reset);
+	}
+
+ out:
+	return strlen(buf);
+}
+static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR,
+	_ctl_host_trace_buffer_enable_show,
+	_ctl_host_trace_buffer_enable_store);
+
+/*********** diagnostic trigger suppport *********************************/
+
+/**
+ * _ctl_diag_trigger_master_show - show the diag_trigger_master attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_master_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_MASTER_TRIGGER_T);
+	memcpy(buf, &ioc->diag_trigger_master, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_diag_trigger_master_store - store the diag_trigger_master attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_master_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count);
+	memset(&ioc->diag_trigger_master, 0,
+	    sizeof(struct SL_WH_MASTER_TRIGGER_T));
+	memcpy(&ioc->diag_trigger_master, buf, rc);
+	ioc->diag_trigger_master.MasterData |=
+	    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+static DEVICE_ATTR(diag_trigger_master, S_IRUGO | S_IWUSR,
+	_ctl_diag_trigger_master_show, _ctl_diag_trigger_master_store);
+
+
+/**
+ * _ctl_diag_trigger_event_show - show the diag_trigger_event attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_event_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_event, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_diag_trigger_event_store - store the diag_trigger_event attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_event_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t sz;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count);
+	memset(&ioc->diag_trigger_event, 0,
+	    sizeof(struct SL_WH_EVENT_TRIGGERS_T));
+	memcpy(&ioc->diag_trigger_event, buf, sz);
+	if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+static DEVICE_ATTR(diag_trigger_event, S_IRUGO | S_IWUSR,
+	_ctl_diag_trigger_event_show, _ctl_diag_trigger_event_store);
+
+
+/**
+ * _ctl_diag_trigger_scsi_show - show the diag_trigger_scsi attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_scsi_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_scsi, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_diag_trigger_scsi_store - store the diag_trigger_scsi attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_scsi_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t sz;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	sz = min(sizeof(struct SL_WH_SCSI_TRIGGERS_T), count);
+	memset(&ioc->diag_trigger_scsi, 0,
+	    sizeof(struct SL_WH_EVENT_TRIGGERS_T));
+	memcpy(&ioc->diag_trigger_scsi, buf, sz);
+	if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+static DEVICE_ATTR(diag_trigger_scsi, S_IRUGO | S_IWUSR,
+	_ctl_diag_trigger_scsi_show, _ctl_diag_trigger_scsi_store);
+
+
+/**
+ * _ctl_diag_trigger_scsi_show - show the diag_trigger_mpi attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_mpi_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_MPI_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_mpi, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_diag_trigger_mpi_store - store the diag_trigger_mpi attribute
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_diag_trigger_mpi_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t sz;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count);
+	memset(&ioc->diag_trigger_mpi, 0,
+	    sizeof(struct SL_WH_EVENT_TRIGGERS_T));
+	memcpy(&ioc->diag_trigger_mpi, buf, sz);
+	if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+
+static DEVICE_ATTR(diag_trigger_mpi, S_IRUGO | S_IWUSR,
+	_ctl_diag_trigger_mpi_show, _ctl_diag_trigger_mpi_store);
+
+/*********** diagnostic trigger suppport *** END ****************************/
+
+
+
+/*****************************************/
+
+struct device_attribute *mpt3sas_host_attrs[] = {
+	&dev_attr_version_fw,
+	&dev_attr_version_bios,
+	&dev_attr_version_mpi,
+	&dev_attr_version_product,
+	&dev_attr_version_nvdata_persistent,
+	&dev_attr_version_nvdata_default,
+	&dev_attr_board_name,
+	&dev_attr_board_assembly,
+	&dev_attr_board_tracer,
+	&dev_attr_io_delay,
+	&dev_attr_device_delay,
+	&dev_attr_logging_level,
+	&dev_attr_fwfault_debug,
+	&dev_attr_fw_queue_depth,
+	&dev_attr_host_sas_address,
+	&dev_attr_ioc_reset_count,
+	&dev_attr_host_trace_buffer_size,
+	&dev_attr_host_trace_buffer,
+	&dev_attr_host_trace_buffer_enable,
+	&dev_attr_reply_queue_count,
+	&dev_attr_diag_trigger_master,
+	&dev_attr_diag_trigger_event,
+	&dev_attr_diag_trigger_scsi,
+	&dev_attr_diag_trigger_mpi,
+	NULL,
+};
+
+/* device attributes */
+
+/**
+ * _ctl_device_sas_address_show - sas address
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the sas address for the target
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+	    (unsigned long long)sas_device_priv_data->sas_target->sas_address);
+}
+static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
+
+/**
+ * _ctl_device_handle_show - device handle
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the firmware assigned device handle
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
+	    sas_device_priv_data->sas_target->handle);
+}
+static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
+
+struct device_attribute *mpt3sas_dev_attrs[] = {
+	&dev_attr_sas_address,
+	&dev_attr_sas_device_handle,
+	NULL,
+};
+
+static const struct file_operations ctl_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = _ctl_ioctl,
+	.release = _ctl_release,
+	.poll = _ctl_poll,
+	.fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = _ctl_ioctl_compat,
+#endif
+};
+
+static struct miscdevice ctl_dev = {
+	.minor  = MPT3SAS_MINOR,
+	.name   = MPT3SAS_DEV_NAME,
+	.fops   = &ctl_fops,
+};
+
+/**
+ * mpt3sas_ctl_init - main entry point for ctl.
+ *
+ */
+void
+mpt3sas_ctl_init(void)
+{
+	async_queue = NULL;
+	if (misc_register(&ctl_dev) < 0)
+		pr_err("%s can't register misc device [minor=%d]\n",
+		    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+	init_waitqueue_head(&ctl_poll_wait);
+}
+
+/**
+ * mpt3sas_ctl_exit - exit point for ctl
+ *
+ */
+void
+mpt3sas_ctl_exit(void)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	int i;
+
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+
+		/* free memory associated to diag buffers */
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!ioc->diag_buffer[i])
+				continue;
+			if (!(ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_REGISTERED))
+				continue;
+			if ((ioc->diag_buffer_status[i] &
+			    MPT3_DIAG_BUFFER_IS_RELEASED))
+				continue;
+			pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
+			ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
+			ioc->diag_buffer[i] = NULL;
+			ioc->diag_buffer_status[i] = 0;
+		}
+
+		kfree(ioc->event_log);
+	}
+	misc_deregister(&ctl_dev);
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
new file mode 100644
index 0000000..bd89f4f
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -0,0 +1,418 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_CTL_H_INCLUDED
+#define MPT3SAS_CTL_H_INCLUDED
+
+#ifdef __KERNEL__
+#include <linux/miscdevice.h>
+#endif
+
+
+#ifndef MPT3SAS_MINOR
+#define MPT3SAS_MINOR		(MPT_MINOR + 2)
+#endif
+#define MPT3SAS_DEV_NAME	"mpt3ctl"
+#define MPT3_MAGIC_NUMBER	'L'
+#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
+
+/**
+ * IOCTL opcodes
+ */
+#define MPT3IOCINFO	_IOWR(MPT3_MAGIC_NUMBER, 17, \
+	struct mpt3_ioctl_iocinfo)
+#define MPT3COMMAND	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command)
+#ifdef CONFIG_COMPAT
+#define MPT3COMMAND32	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command32)
+#endif
+#define MPT3EVENTQUERY	_IOWR(MPT3_MAGIC_NUMBER, 21, \
+	struct mpt3_ioctl_eventquery)
+#define MPT3EVENTENABLE	_IOWR(MPT3_MAGIC_NUMBER, 22, \
+	struct mpt3_ioctl_eventenable)
+#define MPT3EVENTREPORT	_IOWR(MPT3_MAGIC_NUMBER, 23, \
+	struct mpt3_ioctl_eventreport)
+#define MPT3HARDRESET	_IOWR(MPT3_MAGIC_NUMBER, 24, \
+	struct mpt3_ioctl_diag_reset)
+#define MPT3BTDHMAPPING	_IOWR(MPT3_MAGIC_NUMBER, 31, \
+	struct mpt3_ioctl_btdh_mapping)
+
+/* diag buffer support */
+#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \
+	struct mpt3_diag_register)
+#define MPT3DIAGRELEASE	_IOWR(MPT3_MAGIC_NUMBER, 27, \
+	struct mpt3_diag_release)
+#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \
+	struct mpt3_diag_unregister)
+#define MPT3DIAGQUERY	_IOWR(MPT3_MAGIC_NUMBER, 29, \
+	struct mpt3_diag_query)
+#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \
+	struct mpt3_diag_read_buffer)
+
+/**
+ * struct mpt3_ioctl_header - main header structure
+ * @ioc_number -  IOC unit number
+ * @port_number - IOC port number
+ * @max_data_size - maximum number bytes to transfer on read
+ */
+struct mpt3_ioctl_header {
+	uint32_t ioc_number;
+	uint32_t port_number;
+	uint32_t max_data_size;
+};
+
+/**
+ * struct mpt3_ioctl_diag_reset - diagnostic reset
+ * @hdr - generic header
+ */
+struct mpt3_ioctl_diag_reset {
+	struct mpt3_ioctl_header hdr;
+};
+
+
+/**
+ * struct mpt3_ioctl_pci_info - pci device info
+ * @device - pci device id
+ * @function - pci function id
+ * @bus - pci bus id
+ * @segment_id - pci segment id
+ */
+struct mpt3_ioctl_pci_info {
+	union {
+		struct {
+			uint32_t device:5;
+			uint32_t function:3;
+			uint32_t bus:24;
+		} bits;
+		uint32_t  word;
+	} u;
+	uint32_t segment_id;
+};
+
+
+#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
+#define MPT2_IOCTL_INTERFACE_FC		(0x01)
+#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
+#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
+#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
+#define MPT2_IOCTL_VERSION_LENGTH	(32)
+
+/**
+ * struct mpt3_ioctl_iocinfo - generic controller info
+ * @hdr - generic header
+ * @adapter_type - type of adapter (spi, fc, sas)
+ * @port_number - port number
+ * @pci_id - PCI Id
+ * @hw_rev - hardware revision
+ * @sub_system_device - PCI subsystem Device ID
+ * @sub_system_vendor - PCI subsystem Vendor ID
+ * @rsvd0 - reserved
+ * @firmware_version - firmware version
+ * @bios_version - BIOS version
+ * @driver_version - driver version - 32 ASCII characters
+ * @rsvd1 - reserved
+ * @scsi_id - scsi id of adapter 0
+ * @rsvd2 - reserved
+ * @pci_information - pci info (2nd revision)
+ */
+struct mpt3_ioctl_iocinfo {
+	struct mpt3_ioctl_header hdr;
+	uint32_t adapter_type;
+	uint32_t port_number;
+	uint32_t pci_id;
+	uint32_t hw_rev;
+	uint32_t subsystem_device;
+	uint32_t subsystem_vendor;
+	uint32_t rsvd0;
+	uint32_t firmware_version;
+	uint32_t bios_version;
+	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
+	uint8_t rsvd1;
+	uint8_t scsi_id;
+	uint16_t rsvd2;
+	struct mpt3_ioctl_pci_info pci_information;
+};
+
+
+/* number of event log entries */
+#define MPT3SAS_CTL_EVENT_LOG_SIZE (50)
+
+/**
+ * struct mpt3_ioctl_eventquery - query event count and type
+ * @hdr - generic header
+ * @event_entries - number of events returned by get_event_report
+ * @rsvd - reserved
+ * @event_types - type of events currently being captured
+ */
+struct mpt3_ioctl_eventquery {
+	struct mpt3_ioctl_header hdr;
+	uint16_t event_entries;
+	uint16_t rsvd;
+	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+/**
+ * struct mpt3_ioctl_eventenable - enable/disable event capturing
+ * @hdr - generic header
+ * @event_types - toggle off/on type of events to be captured
+ */
+struct mpt3_ioctl_eventenable {
+	struct mpt3_ioctl_header hdr;
+	uint32_t event_types[4];
+};
+
+#define MPT3_EVENT_DATA_SIZE (192)
+/**
+ * struct MPT3_IOCTL_EVENTS -
+ * @event - the event that was reported
+ * @context - unique value for each event assigned by driver
+ * @data - event data returned in fw reply message
+ */
+struct MPT3_IOCTL_EVENTS {
+	uint32_t event;
+	uint32_t context;
+	uint8_t data[MPT3_EVENT_DATA_SIZE];
+};
+
+/**
+ * struct mpt3_ioctl_eventreport - returing event log
+ * @hdr - generic header
+ * @event_data - (see struct MPT3_IOCTL_EVENTS)
+ */
+struct mpt3_ioctl_eventreport {
+	struct mpt3_ioctl_header hdr;
+	struct MPT3_IOCTL_EVENTS event_data[1];
+};
+
+/**
+ * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl
+ * @hdr - generic header
+ * @timeout - command timeout in seconds. (if zero then use driver default
+ *  value).
+ * @reply_frame_buf_ptr - reply location
+ * @data_in_buf_ptr - destination for read
+ * @data_out_buf_ptr - data source for write
+ * @sense_data_ptr - sense data location
+ * @max_reply_bytes - maximum number of reply bytes to be sent to app.
+ * @data_in_size - number bytes for data transfer in (read)
+ * @data_out_size - number bytes for data transfer out (write)
+ * @max_sense_bytes - maximum number of bytes for auto sense buffers
+ * @data_sge_offset - offset in words from the start of the request message to
+ * the first SGL
+ * @mf[1];
+ */
+struct mpt3_ioctl_command {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	void __user *reply_frame_buf_ptr;
+	void __user *data_in_buf_ptr;
+	void __user *data_out_buf_ptr;
+	void __user *sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+
+#ifdef CONFIG_COMPAT
+struct mpt3_ioctl_command32 {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	uint32_t reply_frame_buf_ptr;
+	uint32_t data_in_buf_ptr;
+	uint32_t data_out_buf_ptr;
+	uint32_t sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+#endif
+
+/**
+ * struct mpt3_ioctl_btdh_mapping - mapping info
+ * @hdr - generic header
+ * @id - target device identification number
+ * @bus - SCSI bus number that the target device exists on
+ * @handle - device handle for the target device
+ * @rsvd - reserved
+ *
+ * To obtain a bus/id the application sets
+ * handle to valid handle, and bus/id to 0xFFFF.
+ *
+ * To obtain the device handle the application sets
+ * bus/id valid value, and the handle to 0xFFFF.
+ */
+struct mpt3_ioctl_btdh_mapping {
+	struct mpt3_ioctl_header hdr;
+	uint32_t id;
+	uint32_t bus;
+	uint16_t handle;
+	uint16_t rsvd;
+};
+
+
+
+/* application flags for mpt3_diag_register, mpt3_diag_query */
+#define MPT3_APP_FLAGS_APP_OWNED	(0x0001)
+#define MPT3_APP_FLAGS_BUFFER_VALID	(0x0002)
+#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
+
+/* flags for mpt3_diag_read_buffer */
+#define MPT3_FLAGS_REREGISTER		(0x0001)
+
+#define MPT3_PRODUCT_SPECIFIC_DWORDS		23
+
+/**
+ * struct mpt3_diag_register - application register with driver
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @requested_buffer_size - buffers size in bytes
+ * @unique_id - tag specified by application that is used to signal ownership
+ *  of the buffer.
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+struct mpt3_diag_register {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t requested_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_unregister - application unregister with driver
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be unregistered
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+struct mpt3_diag_unregister {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_query - query relevant info associated with diag buffers
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @total_buffer_size - diag buffer size in bytes
+ * @driver_added_buffer_size - size of extra space appended to end of buffer
+ * @unique_id - unique id associated with this buffer.
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+struct mpt3_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t total_buffer_size;
+	uint32_t driver_added_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_release -  request to send Diag Release Message to firmware
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be released
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+struct mpt3_diag_release {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_read_buffer - request for copy of the diag buffer
+ * @hdr - generic header
+ * @status -
+ * @reserved -
+ * @flags - misc flags
+ * @starting_offset - starting offset within drivers buffer where to start
+ *  reading data at into the specified application buffer
+ * @bytes_to_read - number of bytes to copy from the drivers buffer into the
+ *  application buffer starting at starting_offset.
+ * @unique_id - unique id associated with this buffer.
+ * @diagnostic_data - data payload
+ */
+struct mpt3_diag_read_buffer {
+	struct mpt3_ioctl_header hdr;
+	uint8_t status;
+	uint8_t reserved;
+	uint16_t flags;
+	uint32_t starting_offset;
+	uint32_t bytes_to_read;
+	uint32_t unique_id;
+	uint32_t diagnostic_data[1];
+};
+
+#endif /* MPT3SAS_CTL_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
new file mode 100644
index 0000000..35405e7
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -0,0 +1,219 @@
+/*
+ * Logging Support for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_DEBUG_H_INCLUDED
+#define MPT3SAS_DEBUG_H_INCLUDED
+
+#define MPT_DEBUG			0x00000001
+#define MPT_DEBUG_MSG_FRAME		0x00000002
+#define MPT_DEBUG_SG			0x00000004
+#define MPT_DEBUG_EVENTS		0x00000008
+#define MPT_DEBUG_EVENT_WORK_TASK	0x00000010
+#define MPT_DEBUG_INIT			0x00000020
+#define MPT_DEBUG_EXIT			0x00000040
+#define MPT_DEBUG_FAIL			0x00000080
+#define MPT_DEBUG_TM			0x00000100
+#define MPT_DEBUG_REPLY		0x00000200
+#define MPT_DEBUG_HANDSHAKE		0x00000400
+#define MPT_DEBUG_CONFIG		0x00000800
+#define MPT_DEBUG_DL			0x00001000
+#define MPT_DEBUG_RESET		0x00002000
+#define MPT_DEBUG_SCSI			0x00004000
+#define MPT_DEBUG_IOCTL		0x00008000
+#define MPT_DEBUG_SAS			0x00020000
+#define MPT_DEBUG_TRANSPORT		0x00040000
+#define MPT_DEBUG_TASK_SET_FULL	0x00080000
+
+#define MPT_DEBUG_TRIGGER_DIAG		0x00200000
+
+
+/*
+ * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig
+ */
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+#define MPT_CHECK_LOGGING(IOC, CMD, BITS)			\
+{								\
+	if (IOC->logging_level & BITS)				\
+		CMD;						\
+}
+#else
+#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
+#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
+
+
+/*
+ * debug macros
+ */
+
+#define dprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
+
+#define dsgprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
+
+#define devtprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
+
+#define dewtprintk(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK)
+
+#define dinitprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
+
+#define dexitprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
+
+#define dfailprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
+
+#define dtmprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
+
+#define dreplyprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
+
+#define dhsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
+
+#define dcprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
+
+#define ddlprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
+
+#define drsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
+
+#define dsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
+
+#define dctlprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
+
+#define dsasprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
+
+#define dsastransport(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
+
+#define dmfprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
+
+#define dtsfprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL)
+
+#define dtransportprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT)
+
+#define dTriggerDiagPrintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRIGGER_DIAG)
+
+
+
+/* inline functions for dumping debug data*/
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _debug_dump_mf - print message frame contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_mf(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("mf:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+/**
+ * _debug_dump_reply - print message frame contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_reply(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("reply:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+/**
+ * _debug_dump_config - print config page contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_config(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("config:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+#else
+#define _debug_dump_mf(mpi_request, sz)
+#define _debug_dump_reply(mpi_request, sz)
+#define _debug_dump_config(mpi_request, sz)
+#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
+
+#endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
new file mode 100644
index 0000000..05f8045
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -0,0 +1,8167 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/aer.h>
+#include <linux/raid_class.h>
+
+#include "mpt3sas_base.h"
+
+MODULE_AUTHOR(MPT3SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
+
+#define RAID_CHANNEL 1
+/* forward proto's */
+static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander);
+static void _firmware_event_work(struct work_struct *work);
+
+static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device);
+static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 retry_count, u8 is_pd);
+
+static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+
+static void _scsih_scan_start(struct Scsi_Host *shost);
+static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
+
+/* global parameters */
+LIST_HEAD(mpt3sas_ioc_list);
+
+/* local parameters */
+static u8 scsi_io_cb_idx = -1;
+static u8 tm_cb_idx = -1;
+static u8 ctl_cb_idx = -1;
+static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
+static u8 transport_cb_idx = -1;
+static u8 scsih_cb_idx = -1;
+static u8 config_cb_idx = -1;
+static int mpt_ids;
+
+static u8 tm_tr_cb_idx = -1 ;
+static u8 tm_tr_volume_cb_idx = -1 ;
+static u8 tm_sas_control_cb_idx = -1;
+
+/* command line options */
+static u32 logging_level;
+MODULE_PARM_DESC(logging_level,
+	" bits for enabling additional logging info (default=0)");
+
+
+static ushort max_sectors = 0xFFFF;
+module_param(max_sectors, ushort, 0);
+MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
+
+
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPT3SAS_MAX_LUN (16895)
+static int max_lun = MPT3SAS_MAX_LUN;
+module_param(max_lun, int, 0);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
+
+
+
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable,
+	" post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
+/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
+static int prot_mask = -1;
+module_param(prot_mask, int, 0);
+MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
+
+
+/* raid transport support */
+
+static struct raid_template *mpt3sas_raid_template;
+
+
+/**
+ * struct sense_info - common structure for obtaining sense keys
+ * @skey: sense key
+ * @asc: additional sense code
+ * @ascq: additional sense code qualifier
+ */
+struct sense_info {
+	u8 skey;
+	u8 asc;
+	u8 ascq;
+};
+
+#define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB)
+#define MPT3SAS_TURN_ON_FAULT_LED (0xFFFC)
+#define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT3SAS_ABRT_TASK_SET (0xFFFE)
+#define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
+/**
+ * struct fw_event_work - firmware event struct
+ * @list: link list framework
+ * @work: work object (ioc->fault_reset_work_q)
+ * @cancel_pending_work: flag set during reset handling
+ * @ioc: per adapter object
+ * @device_handle: device handle
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @ignore: flag meaning this event has been marked to ignore
+ * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
+ * @event_data: reply event data payload follows
+ *
+ * This object stored on ioc->fw_event_list.
+ */
+struct fw_event_work {
+	struct list_head	list;
+	struct work_struct	work;
+	u8			cancel_pending_work;
+	struct delayed_work	delayed_work;
+
+	struct MPT3SAS_ADAPTER *ioc;
+	u16			device_handle;
+	u8			VF_ID;
+	u8			VP_ID;
+	u8			ignore;
+	u16			event;
+	void			*event_data;
+};
+
+/* raid transport support */
+static struct raid_template *mpt3sas_raid_template;
+
+/**
+ * struct _scsi_io_transfer - scsi io transfer
+ * @handle: sas device handle (assigned by firmware)
+ * @is_raid: flag set for hidden raid components
+ * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
+ * @data_length: data transfer length
+ * @data_dma: dma pointer to data
+ * @sense: sense data
+ * @lun: lun number
+ * @cdb_length: cdb length
+ * @cdb: cdb contents
+ * @timeout: timeout for this command
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @valid_reply: flag set for reply message
+ * @sense_length: sense length
+ * @ioc_status: ioc status
+ * @scsi_state: scsi state
+ * @scsi_status: scsi staus
+ * @log_info: log information
+ * @transfer_length: data length transfer when there is a reply message
+ *
+ * Used for sending internal scsi commands to devices within this module.
+ * Refer to _scsi_send_scsi_io().
+ */
+struct _scsi_io_transfer {
+	u16	handle;
+	u8	is_raid;
+	enum dma_data_direction dir;
+	u32	data_length;
+	dma_addr_t data_dma;
+	u8	sense[SCSI_SENSE_BUFFERSIZE];
+	u32	lun;
+	u8	cdb_length;
+	u8	cdb[32];
+	u8	timeout;
+	u8	VF_ID;
+	u8	VP_ID;
+	u8	valid_reply;
+  /* the following bits are only valid when 'valid_reply = 1' */
+	u32	sense_length;
+	u16	ioc_status;
+	u8	scsi_state;
+	u8	scsi_status;
+	u32	log_info;
+	u32	transfer_length;
+};
+
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static DEFINE_PCI_DEVICE_TABLE(scsih_pci_table) = {
+	/* Fury ~ 3004 and 3008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Invader ~ 3108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{0}	/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, scsih_pci_table);
+
+/**
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
+ *
+ * Note: The logging levels are defined in mpt3sas_debug.h.
+ */
+static int
+_scsih_set_debug_level(const char *val, struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (ret)
+		return ret;
+
+	pr_info("setting logging_level(0x%08x)\n", logging_level);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+		ioc->logging_level = logging_level;
+	return 0;
+}
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
+	&logging_level, 0644);
+
+/**
+ * _scsih_srch_boot_sas_address - search based on sas_address
+ * @sas_address: sas address
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_sas_address(u64 sas_address,
+	Mpi2BootDeviceSasWwid_t *boot_device)
+{
+	return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_device_name - search based on device name
+ * @device_name: device name specified in INDENTIFY fram
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_device_name(u64 device_name,
+	Mpi2BootDeviceDeviceName_t *boot_device)
+{
+	return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
+	Mpi2BootDeviceEnclosureSlot_t *boot_device)
+{
+	return (enclosure_logical_id == le64_to_cpu(boot_device->
+	    EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
+	    SlotNumber)) ? 1 : 0;
+}
+
+/**
+ * _scsih_is_boot_device - search for matching boot device.
+ * @sas_address: sas address
+ * @device_name: device name specified in INDENTIFY fram
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @form: specifies boot device form
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static int
+_scsih_is_boot_device(u64 sas_address, u64 device_name,
+	u64 enclosure_logical_id, u16 slot, u8 form,
+	Mpi2BiosPage2BootDevice_t *boot_device)
+{
+	int rc = 0;
+
+	switch (form) {
+	case MPI2_BIOSPAGE2_FORM_SAS_WWID:
+		if (!sas_address)
+			break;
+		rc = _scsih_srch_boot_sas_address(
+		    sas_address, &boot_device->SasWwid);
+		break;
+	case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
+		if (!enclosure_logical_id)
+			break;
+		rc = _scsih_srch_boot_encl_slot(
+		    enclosure_logical_id,
+		    slot, &boot_device->EnclosureSlot);
+		break;
+	case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
+		if (!device_name)
+			break;
+		rc = _scsih_srch_boot_device_name(
+		    device_name, &boot_device->DeviceName);
+		break;
+	case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
+		break;
+	}
+
+	return rc;
+}
+
+/**
+ * _scsih_get_sas_address - set the sas_address for given device handle
+ * @handle: device handle
+ * @sas_address: sas address
+ *
+ * Returns 0 success, non-zero when failure
+ */
+static int
+_scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u64 *sas_address)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 ioc_status;
+
+	*sas_address = 0;
+
+	if (handle <= ioc->sas_hba.num_phys) {
+		*sas_address = ioc->sas_hba.sas_address;
+		return 0;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+		return 0;
+	}
+
+	/* we hit this becuase the given parent handle doesn't exist */
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return -ENXIO;
+
+	/* else error case */
+	pr_err(MPT3SAS_FMT
+		"handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n",
+		ioc->name, handle, ioc_status,
+	     __FILE__, __LINE__, __func__);
+	return -EIO;
+}
+
+/**
+ * _scsih_determine_boot_device - determine boot device.
+ * @ioc: per adapter object
+ * @device: either sas_device or raid_device object
+ * @is_raid: [flag] 1 = raid object, 0 = sas object
+ *
+ * Determines whether this device should be first reported device to
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
+ * There are primary, alternate, and current entries in bios page 2. The order
+ * priority is primary, alternate, then current.  This routine saves
+ * the corresponding device object and is_raid flag in the ioc object.
+ * The saved data to be used later in _scsih_probe_boot_devices().
+ */
+static void
+_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc,
+	void *device, u8 is_raid)
+{
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	u64 sas_address;
+	u64 device_name;
+	u64 enclosure_logical_id;
+	u16 slot;
+
+	 /* only process this function when driver loads */
+	if (!ioc->is_driver_loading)
+		return;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	if (!is_raid) {
+		sas_device = device;
+		sas_address = sas_device->sas_address;
+		device_name = sas_device->device_name;
+		enclosure_logical_id = sas_device->enclosure_logical_id;
+		slot = sas_device->slot;
+	} else {
+		raid_device = device;
+		sas_address = raid_device->wwid;
+		device_name = 0;
+		enclosure_logical_id = 0;
+		slot = 0;
+	}
+
+	if (!ioc->req_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: req_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->req_boot_device.device = device;
+			ioc->req_boot_device.is_raid = is_raid;
+		}
+	}
+
+	if (!ioc->req_alt_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqAltBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedAltBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: req_alt_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->req_alt_boot_device.device = device;
+			ioc->req_alt_boot_device.is_raid = is_raid;
+		}
+	}
+
+	if (!ioc->current_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.CurrentBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.CurrentBootDevice)) {
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			   "%s: current_boot_device(0x%016llx)\n",
+			    ioc->name, __func__,
+			    (unsigned long long)sas_address));
+			ioc->current_boot_device.device = device;
+			ioc->current_boot_device.is_raid = is_raid;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_sas_device_find_by_sas_address - sas device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+struct _sas_device *
+mpt3sas_scsih_sas_device_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_device *sas_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->sas_address == sas_address)
+			return sas_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->sas_address == sas_address)
+			return sas_device;
+
+	return NULL;
+}
+
+/**
+ * _scsih_sas_device_find_by_handle - sas device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+static struct _sas_device *
+_scsih_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->handle == handle)
+			return sas_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->handle == handle)
+			return sas_device;
+
+	return NULL;
+}
+
+/**
+ * _scsih_sas_device_remove - remove sas_device from list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Removing object and freeing associated memory from the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	if (!sas_device)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_del(&sas_device->list);
+	kfree(sas_device);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_device_remove_by_handle - removing device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+static void
+_scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (sas_device)
+		list_del(&sas_device->list);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device)
+		_scsih_remove_device(ioc, sas_device);
+}
+
+/**
+ * mpt3sas_device_remove_by_sas_address - removing device object by sas address
+ * @ioc: per adapter object
+ * @sas_address: device sas_address
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    sas_address);
+	if (sas_device)
+		list_del(&sas_device->list);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device)
+		_scsih_remove_device(ioc, sas_device);
+}
+
+/**
+ * _scsih_sas_device_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object to the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__, sas_device->handle,
+		(unsigned long long)sas_device->sas_address));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+	     sas_device->sas_address_parent)) {
+		_scsih_sas_device_remove(ioc, sas_device);
+	} else if (!sas_device->starget) {
+		/*
+		 * When asyn scanning is enabled, its not possible to remove
+		 * devices while scanning is turned on due to an oops in
+		 * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
+		 */
+		if (!ioc->is_driver_loading)
+			mpt3sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent);
+		_scsih_sas_device_remove(ioc, sas_device);
+	}
+}
+
+/**
+ * _scsih_sas_device_init_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->sas_device_init_list.
+ */
+static void
+_scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+		__func__, sas_device->handle,
+		(unsigned long long)sas_device->sas_address));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
+	_scsih_determine_boot_device(ioc, sas_device, 0);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_raid_device_find_by_id - raid device search
+ * @ioc: per adapter object
+ * @id: sas device target id
+ * @channel: sas device channel
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on target id, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->id == id && raid_device->channel == channel) {
+			r = raid_device;
+			goto out;
+		}
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_handle - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on handle, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->handle != handle)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_wwid - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on wwid, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid != wwid)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_add - add raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ * This is added to the raid_device_list link list.
+ */
+static void
+_scsih_raid_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+	    raid_device->handle, (unsigned long long)raid_device->wwid));
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_add_tail(&raid_device->list, &ioc->raid_device_list);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_raid_device_remove - delete raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ */
+static void
+_scsih_raid_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_del(&raid_device->list);
+	kfree(raid_device);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * mpt3sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->handle != handle)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_scsih_expander_find_by_sas_address - expander device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * This searches for expander device based on sas_address, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	struct _sas_node *sas_expander, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * _scsih_expander_node_add - insert expander device to the list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new object to the ioc->sas_expander_list.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_expander_node_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_is_end_device - determines if device is an end device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if end device.
+ */
+static int
+_scsih_is_end_device(u32 device_info)
+{
+	if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
+		((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * _scsih_scsi_lookup_get - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+static struct scsi_cmnd *
+_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return ioc->scsi_lookup[smid - 1].scmd;
+}
+
+/**
+ * _scsih_scsi_lookup_get_clear - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ * Then will derefrence the stored scmd pointer.
+ */
+static inline struct scsi_cmnd *
+_scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	unsigned long flags;
+	struct scsi_cmnd *scmd;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	scmd = ioc->scsi_lookup[smid - 1].scmd;
+	ioc->scsi_lookup[smid - 1].scmd = NULL;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	return scmd;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_scmd - scmd lookup
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @scmd: pointer to scsi command object
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a scmd pointer in the scsi_lookup array,
+ * returning the revelent smid.  A returned value of zero means invalid.
+ */
+static u16
+_scsih_scsi_lookup_find_by_scmd(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd
+	*scmd)
+{
+	u16 smid;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	smid = 0;
+	for (i = 0; i < ioc->scsiio_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd == scmd) {
+			smid = ioc->scsi_lookup[i].smid;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_target - search for matching channel:id
+ * @ioc: per adapter object
+ * @id: target id
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_target(struct MPT3SAS_ADAPTER *ioc, int id,
+	int channel)
+{
+	u8 found;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	found = 0;
+	for (i = 0 ; i < ioc->scsiio_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd &&
+		    (ioc->scsi_lookup[i].scmd->device->id == id &&
+		    ioc->scsi_lookup[i].scmd->device->channel == channel)) {
+			found = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return found;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
+	unsigned int lun, int channel)
+{
+	u8 found;
+	unsigned long	flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	found = 0;
+	for (i = 0 ; i < ioc->scsiio_depth; i++) {
+		if (ioc->scsi_lookup[i].scmd &&
+		    (ioc->scsi_lookup[i].scmd->device->id == id &&
+		    ioc->scsi_lookup[i].scmd->device->channel == channel &&
+		    ioc->scsi_lookup[i].scmd->device->lun == lun)) {
+			found = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return found;
+}
+
+
+static void
+_scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct Scsi_Host *shost = sdev->host;
+	int max_depth;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	max_depth = shost->can_queue;
+
+	/* limit max device queue for SATA to 32 */
+	sas_device_priv_data = sdev->hostdata;
+	if (!sas_device_priv_data)
+		goto not_sata;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	if (!sas_target_priv_data)
+		goto not_sata;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
+		goto not_sata;
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	   sas_device_priv_data->sas_target->sas_address);
+	if (sas_device && sas_device->device_info &
+	    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+		max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ not_sata:
+
+	if (!sdev->tagged_supported)
+		max_depth = 1;
+	if (qdepth > max_depth)
+		qdepth = max_depth;
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+}
+
+/**
+ * _scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
+ * (see include/scsi/scsi_host.h for definition)
+ *
+ * Returns queue depth.
+ */
+static int
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+{
+	if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP)
+		_scsih_adjust_queue_depth(sdev, qdepth);
+	else if (reason == SCSI_QDEPTH_QFULL)
+		scsi_track_queue_full(sdev, qdepth);
+	else
+		return -EOPNOTSUPP;
+
+	if (sdev->inquiry_len > 7)
+		sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " \
+		"simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
+		sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
+		sdev->ordered_tags, sdev->scsi_level,
+		(sdev->inquiry[7] & 2) >> 1);
+
+	return sdev->queue_depth;
+}
+
+/**
+ * _scsih_change_queue_type - changing device queue tag type
+ * @sdev: scsi device struct
+ * @tag_type: requested tag type
+ *
+ * Returns queue tag type.
+ */
+static int
+_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+	if (sdev->tagged_supported) {
+		scsi_set_tag_type(sdev, tag_type);
+		if (tag_type)
+			scsi_activate_tcq(sdev, sdev->queue_depth);
+		else
+			scsi_deactivate_tcq(sdev, sdev->queue_depth);
+	} else
+		tag_type = 0;
+
+	return tag_type;
+}
+
+
+/**
+ * _scsih_target_alloc - target add routine
+ * @starget: scsi target struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+_scsih_target_alloc(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	struct sas_rphy *rphy;
+
+	sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL);
+	if (!sas_target_priv_data)
+		return -ENOMEM;
+
+	starget->hostdata = sas_target_priv_data;
+	sas_target_priv_data->starget = starget;
+	sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+
+	/* RAID volumes */
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			sas_target_priv_data->handle = raid_device->handle;
+			sas_target_priv_data->sas_address = raid_device->wwid;
+			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+			raid_device->starget = starget;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		return 0;
+	}
+
+	/* sas/sata devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	rphy = dev_to_rphy(starget->dev.parent);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	   rphy->identify.sas_address);
+
+	if (sas_device) {
+		sas_target_priv_data->handle = sas_device->handle;
+		sas_target_priv_data->sas_address = sas_device->sas_address;
+		sas_device->starget = starget;
+		sas_device->id = starget->id;
+		sas_device->channel = starget->channel;
+		if (test_bit(sas_device->handle, ioc->pd_handles))
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+		if (sas_device->fast_path)
+			sas_target_priv_data->flags |= MPT_TARGET_FASTPATH_IO;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return 0;
+}
+
+/**
+ * _scsih_target_destroy - target destroy routine
+ * @starget: scsi target struct
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_target_destroy(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	struct sas_rphy *rphy;
+
+	sas_target_priv_data = starget->hostdata;
+	if (!sas_target_priv_data)
+		return;
+
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			raid_device->starget = NULL;
+			raid_device->sdev = NULL;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		goto out;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	rphy = dev_to_rphy(starget->dev.parent);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	   rphy->identify.sas_address);
+	if (sas_device && (sas_device->starget == starget) &&
+	    (sas_device->id == starget->id) &&
+	    (sas_device->channel == starget->channel))
+		sas_device->starget = NULL;
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ out:
+	kfree(sas_target_priv_data);
+	starget->hostdata = NULL;
+}
+
+/**
+ * _scsih_slave_alloc - device add routine
+ * @sdev: scsi device struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+_scsih_slave_alloc(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+
+	sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
+	if (!sas_device_priv_data)
+		return -ENOMEM;
+
+	sas_device_priv_data->lun = sdev->lun;
+	sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns++;
+	sas_device_priv_data->sas_target = sas_target_priv_data;
+	sdev->hostdata = sas_device_priv_data;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
+		sdev->no_uld_attach = 1;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc,
+		    starget->id, starget->channel);
+		if (raid_device)
+			raid_device->sdev = sdev; /* raid is single lun */
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+
+	return 0;
+}
+
+/**
+ * _scsih_slave_destroy - device destroy routine
+ * @sdev: scsi device struct
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_slave_destroy(struct scsi_device *sdev)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget;
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (!sdev->hostdata)
+		return;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns--;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+
+	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		   sas_target_priv_data->sas_address);
+		if (sas_device && !sas_target_priv_data->num_luns)
+			sas_device->starget = NULL;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	kfree(sdev->hostdata);
+	sdev->hostdata = NULL;
+}
+
+/**
+ * _scsih_display_sata_capabilities - sata capabilities
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @sdev: scsi device struct
+ */
+static void
+_scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, struct scsi_device *sdev)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u16 flags;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	flags = le16_to_cpu(sas_device_pg0.Flags);
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+
+	sdev_printk(KERN_INFO, sdev,
+	    "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
+	    "sw_preserve(%s)\n",
+	    (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
+	    "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
+}
+
+/*
+ * raid transport support -
+ * Enabled for SLES11 and newer, in older kernels the driver will panic when
+ * unloading the driver followed by a load - I beleive that the subroutine
+ * raid_class_release() is not cleaning up properly.
+ */
+
+/**
+ * _scsih_is_raid - return boolean indicating device is raid volume
+ * @dev the device struct object
+ */
+static int
+_scsih_is_raid(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
+}
+
+/**
+ * _scsih_get_resync - get raid volume resync percent complete
+ * @dev the device struct object
+ */
+static void
+_scsih_get_resync(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volume_status_flags;
+	u8 percent_complete;
+	u16 handle;
+
+	percent_complete = 0;
+	handle = 0;
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device) {
+		handle = raid_device->handle;
+		percent_complete = raid_device->percent_complete;
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!handle)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		percent_complete = 0;
+		goto out;
+	}
+
+	volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (!(volume_status_flags &
+	    MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
+		percent_complete = 0;
+
+ out:
+	raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
+}
+
+/**
+ * _scsih_get_state - get raid volume level
+ * @dev the device struct object
+ */
+static void
+_scsih_get_state(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volstate;
+	enum raid_state state = RAID_STATE_UNKNOWN;
+	u16 handle = 0;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device)
+		handle = raid_device->handle;
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!raid_device)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
+		state = RAID_STATE_RESYNCING;
+		goto out;
+	}
+
+	switch (vol_pg0.VolumeState) {
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+	case MPI2_RAID_VOL_STATE_ONLINE:
+		state = RAID_STATE_ACTIVE;
+		break;
+	case  MPI2_RAID_VOL_STATE_DEGRADED:
+		state = RAID_STATE_DEGRADED;
+		break;
+	case MPI2_RAID_VOL_STATE_FAILED:
+	case MPI2_RAID_VOL_STATE_MISSING:
+		state = RAID_STATE_OFFLINE;
+		break;
+	}
+ out:
+	raid_set_state(mpt3sas_raid_template, dev, state);
+}
+
+/**
+ * _scsih_set_level - set raid level
+ * @sdev: scsi device struct
+ * @volume_type: volume type
+ */
+static void
+_scsih_set_level(struct scsi_device *sdev, u8 volume_type)
+{
+	enum raid_level level = RAID_LEVEL_UNKNOWN;
+
+	switch (volume_type) {
+	case MPI2_RAID_VOL_TYPE_RAID0:
+		level = RAID_LEVEL_0;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID10:
+		level = RAID_LEVEL_10;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1E:
+		level = RAID_LEVEL_1E;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1:
+		level = RAID_LEVEL_1;
+		break;
+	}
+
+	raid_set_level(mpt3sas_raid_template, &sdev->sdev_gendev, level);
+}
+
+
+/**
+ * _scsih_get_volume_capabilities - volume capabilities
+ * @ioc: per adapter object
+ * @sas_device: the raid_device object
+ *
+ * Returns 0 for success, else 1
+ */
+static int
+_scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds;
+
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	raid_device->num_pds = num_pds;
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		kfree(vol_pg0);
+		return 1;
+	}
+
+	raid_device->volume_type = vol_pg0->VolumeType;
+
+	/* figure out what the underlying devices are by
+	 * obtaining the device_info bits for the 1st device
+	 */
+	if (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+	    vol_pg0->PhysDisk[0].PhysDiskNum))) {
+		if (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    le16_to_cpu(pd_pg0.DevHandle)))) {
+			raid_device->device_info =
+			    le32_to_cpu(sas_device_pg0.DeviceInfo);
+		}
+	}
+
+	kfree(vol_pg0);
+	return 0;
+}
+
+
+
+/**
+ * _scsih_enable_tlr - setting TLR flags
+ * @ioc: per adapter object
+ * @sdev: scsi device struct
+ *
+ * Enabling Transaction Layer Retries for tape devices when
+ * vpd page 0x90 is present
+ *
+ */
+static void
+_scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
+{
+
+	/* only for TAPE */
+	if (sdev->type != TYPE_TAPE)
+		return;
+
+	if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
+		return;
+
+	sas_enable_tlr(sdev);
+	sdev_printk(KERN_INFO, sdev, "TLR %s\n",
+	    sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
+	return;
+
+}
+
+/**
+ * _scsih_slave_configure - device configure routine.
+ * @sdev: scsi device struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+_scsih_slave_configure(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	int qdepth;
+	u8 ssp_target = 0;
+	char *ds = "";
+	char *r_level = "";
+	u16 handle, volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	qdepth = 1;
+	sas_device_priv_data = sdev->hostdata;
+	sas_device_priv_data->configured_lun = 1;
+	sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	handle = sas_target_priv_data->handle;
+
+	/* raid volume handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (!raid_device) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
+		}
+
+		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
+		}
+
+
+		/* RAID Queue Depth Support
+		 * IS volume = underlying qdepth of drive type, either
+		 *    MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH
+		 * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH)
+		 */
+		if (raid_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+			qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+			ds = "SSP";
+		} else {
+			qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
+			 if (raid_device->device_info &
+			    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+				ds = "SATA";
+			else
+				ds = "STP";
+		}
+
+		switch (raid_device->volume_type) {
+		case MPI2_RAID_VOL_TYPE_RAID0:
+			r_level = "RAID0";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1E:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			if (ioc->manu_pg10.OEMIdentifier &&
+			    (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
+			    MFG10_GF0_R10_DISPLAY) &&
+			    !(raid_device->num_pds % 2))
+				r_level = "RAID10";
+			else
+				r_level = "RAID1E";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID1";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID10:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID10";
+			break;
+		case MPI2_RAID_VOL_TYPE_UNKNOWN:
+		default:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAIDX";
+			break;
+		}
+
+		sdev_printk(KERN_INFO, sdev,
+			"%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
+			 r_level, raid_device->handle,
+			 (unsigned long long)raid_device->wwid,
+			 raid_device->num_pds, ds);
+
+
+		_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+
+/* raid transport support */
+		_scsih_set_level(sdev, raid_device->volume_type);
+		return 0;
+	}
+
+	/* non-raid handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		if (mpt3sas_config_get_volume_handle(ioc, handle,
+		    &volume_handle)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__));
+			return 1;
+		}
+		if (volume_handle && mpt3sas_config_get_volume_wwid(ioc,
+		    volume_handle, &volume_wwid)) {
+			dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__));
+			return 1;
+		}
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	   sas_device_priv_data->sas_target->sas_address);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		dfailprintk(ioc, pr_warn(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
+	}
+
+	sas_device->volume_handle = volume_handle;
+	sas_device->volume_wwid = volume_wwid;
+	if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+		qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+		ssp_target = 1;
+		ds = "SSP";
+	} else {
+		qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
+			ds = "STP";
+		else if (sas_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			ds = "SATA";
+	}
+
+	sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " \
+	    "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
+	    ds, handle, (unsigned long long)sas_device->sas_address,
+	    sas_device->phy, (unsigned long long)sas_device->device_name);
+	sdev_printk(KERN_INFO, sdev,
+		"%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
+		ds, (unsigned long long)
+	    sas_device->enclosure_logical_id, sas_device->slot);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (!ssp_target)
+		_scsih_display_sata_capabilities(ioc, handle, sdev);
+
+
+	_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+
+	if (ssp_target) {
+		sas_read_port_mode_page(sdev);
+		_scsih_enable_tlr(ioc, sdev);
+	}
+
+	return 0;
+}
+
+/**
+ * _scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * @sdev: scsi device struct
+ * @bdev: pointer to block device context
+ * @capacity: device size (in 512 byte sectors)
+ * @params: three element array to place output:
+ *              params[0] number of heads (max 255)
+ *              params[1] number of sectors (max 63)
+ *              params[2] number of cylinders
+ *
+ * Return nothing.
+ */
+static int
+_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+	sector_t capacity, int params[])
+{
+	int		heads;
+	int		sectors;
+	sector_t	cylinders;
+	ulong		dummy;
+
+	heads = 64;
+	sectors = 32;
+
+	dummy = heads * sectors;
+	cylinders = capacity;
+	sector_div(cylinders, dummy);
+
+	/*
+	 * Handle extended translation size for logical drives
+	 * > 1Gb
+	 */
+	if ((ulong)capacity >= 0x200000) {
+		heads = 255;
+		sectors = 63;
+		dummy = heads * sectors;
+		cylinders = capacity;
+		sector_div(cylinders, dummy);
+	}
+
+	/* return result */
+	params[0] = heads;
+	params[1] = sectors;
+	params[2] = cylinders;
+
+	return 0;
+}
+
+/**
+ * _scsih_response_code - translation of device response code
+ * @ioc: per adapter object
+ * @response_code: response code returned by the device
+ *
+ * Return nothing.
+ */
+static void
+_scsih_response_code(struct MPT3SAS_ADAPTER *ioc, u8 response_code)
+{
+	char *desc;
+
+	switch (response_code) {
+	case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
+		desc = "task management request completed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
+		desc = "invalid frame";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+		desc = "task management request not supported";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
+		desc = "task management request failed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+		desc = "task management request succeeded";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+		desc = "invalid lun";
+		break;
+	case 0xA:
+		desc = "overlapped tag attempted";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+		desc = "task queued, however not sent to target";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+	pr_warn(MPT3SAS_FMT "response_code(0x%01x): %s\n",
+		ioc->name, response_code, desc);
+}
+
+/**
+ * _scsih_tm_done - tm completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using scsih_issue_tm.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	if (ioc->tm_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->tm_cmds.smid != smid)
+		return 1;
+	mpt3sas_base_flush_reply_queues(ioc);
+	ioc->tm_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+		ioc->tm_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->tm_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->tm_cmds.done);
+	return 1;
+}
+
+/**
+ * mpt3sas_scsih_set_tm_flag - set per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 1;
+			skip = 1;
+			ioc->ignore_loginfos = 1;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 0;
+			skip = 1;
+			ioc->ignore_loginfos = 0;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_issue_tm - main routine for sending tm requests
+ * @ioc: per adapter struct
+ * @device_handle: device handle
+ * @channel: the channel assigned by the OS
+ * @id: the id assigned by the OS
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ * @timeout: timeout in seconds
+ * @serial_number: the serial_number from scmd
+ * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
+ * Context: user
+ *
+ * A generic API for sending task management requests to firmware.
+ *
+ * The callback index is set inside `ioc->tm_cb_idx`.
+ *
+ * Return SUCCESS or FAILED.
+ */
+int
+mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
+	uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
+	unsigned long serial_number, enum mutex_type m_type)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	u16 smid = 0;
+	u32 ioc_state;
+	unsigned long timeleft;
+	struct scsiio_tracker *scsi_lookup = NULL;
+	int rc;
+
+	if (m_type == TM_MUTEX_ON)
+		mutex_lock(&ioc->tm_cmds.mutex);
+	if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_info(MPT3SAS_FMT "%s: tm_cmd busy!!!\n",
+		    __func__, ioc->name);
+		rc = FAILED;
+		goto err_out;
+	}
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		rc = FAILED;
+		goto err_out;
+	}
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, pr_info(MPT3SAS_FMT
+			"unexpected doorbell active!\n", ioc->name));
+		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+		rc = (!rc) ? SUCCESS : FAILED;
+		goto err_out;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_base_fault_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+		rc = (!rc) ? SUCCESS : FAILED;
+		goto err_out;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = FAILED;
+		goto err_out;
+	}
+
+	if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		scsi_lookup = &ioc->scsi_lookup[smid_task - 1];
+
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+		"sending tm: handle(0x%04x), task_type(0x%02x), smid(%d)\n",
+		ioc->name, handle, type, smid_task));
+	ioc->tm_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->tm_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = type;
+	mpi_request->TaskMID = cpu_to_le16(smid_task);
+	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
+	mpt3sas_scsih_set_tm_flag(ioc, handle);
+	init_completion(&ioc->tm_cmds.done);
+	mpt3sas_base_put_smid_hi_priority(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
+	if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
+		if (!(ioc->tm_cmds.status & MPT3_CMD_RESET)) {
+			rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+			    FORCE_BIG_HAMMER);
+			rc = (!rc) ? SUCCESS : FAILED;
+			ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+			mpt3sas_scsih_clear_tm_flag(ioc, handle);
+			goto err_out;
+		}
+	}
+
+	if (ioc->tm_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+		mpi_reply = ioc->tm_cmds.reply;
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT "complete tm: " \
+		    "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo),
+		    le32_to_cpu(mpi_reply->TerminationCount)));
+		if (ioc->logging_level & MPT_DEBUG_TM) {
+			_scsih_response_code(ioc, mpi_reply->ResponseCode);
+			if (mpi_reply->IOCStatus)
+				_debug_dump_mf(mpi_request,
+				    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
+		}
+	}
+
+	switch (type) {
+	case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
+		rc = SUCCESS;
+		if (scsi_lookup->scmd == NULL)
+			break;
+		rc = FAILED;
+		break;
+
+	case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
+		if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
+			rc = FAILED;
+		else
+			rc = SUCCESS;
+		break;
+	case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
+	case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
+		if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
+			rc = FAILED;
+		else
+			rc = SUCCESS;
+		break;
+	case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
+		rc = SUCCESS;
+		break;
+	default:
+		rc = FAILED;
+		break;
+	}
+
+	mpt3sas_scsih_clear_tm_flag(ioc, handle);
+	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+	if (m_type == TM_MUTEX_ON)
+		mutex_unlock(&ioc->tm_cmds.mutex);
+
+	return rc;
+
+ err_out:
+	if (m_type == TM_MUTEX_ON)
+		mutex_unlock(&ioc->tm_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _scsih_tm_display_info - displays info about the device
+ * @ioc: per adapter struct
+ * @scmd: pointer to scsi command object
+ *
+ * Called by task management callback handlers.
+ */
+static void
+_scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
+{
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	struct _sas_device *sas_device = NULL;
+	unsigned long flags;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	device_str = "volume";
+
+	scsi_print_command(scmd);
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		starget_printk(KERN_INFO, starget,
+			"%s handle(0x%04x), %s wwid(0x%016llx)\n",
+			device_str, priv_target->handle,
+		    device_str, (unsigned long long)priv_target->sas_address);
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		    priv_target->sas_address);
+		if (sas_device) {
+			if (priv_target->flags &
+			    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+				starget_printk(KERN_INFO, starget,
+				    "volume handle(0x%04x), "
+				    "volume wwid(0x%016llx)\n",
+				    sas_device->volume_handle,
+				   (unsigned long long)sas_device->volume_wwid);
+			}
+			starget_printk(KERN_INFO, starget,
+			    "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
+			    sas_device->handle,
+			    (unsigned long long)sas_device->sas_address,
+			    sas_device->phy);
+			starget_printk(KERN_INFO, starget,
+			    "enclosure_logical_id(0x%016llx), slot(%d)\n",
+			   (unsigned long long)sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_abort - eh threads main abort routine
+ * @scmd: pointer to scsi command object
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_abort(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u16 smid;
+	u16 handle;
+	int r;
+
+	sdev_printk(KERN_INFO, scmd->device,
+		"attempting task abort! scmd(%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		sdev_printk(KERN_INFO, scmd->device,
+			"device been deleted! scmd(%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* search for the command */
+	smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
+	if (!smid) {
+		scmd->result = DID_RESET << 16;
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components and volumes this is not supported */
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+	    sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mpt3sas_halt_firmware(ioc);
+
+	handle = sas_device_priv_data->sas_target->handle;
+	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	    scmd->device->id, scmd->device->lun,
+	    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
+	    scmd->serial_number, TM_MUTEX_ON);
+
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
+
+/**
+ * _scsih_dev_reset - eh threads main device reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16	handle;
+	int r;
+
+	sdev_printk(KERN_INFO, scmd->device,
+		"attempting device reset! scmd(%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		sdev_printk(KERN_INFO, scmd->device,
+			"device been deleted! scmd(%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc,
+		   sas_device_priv_data->sas_target->handle);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	    scmd->device->id, scmd->device->lun,
+	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, 0,
+	    TM_MUTEX_ON);
+
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
+
+/**
+ * _scsih_target_reset - eh threads main target reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_target_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16	handle;
+	int r;
+	struct scsi_target *starget = scmd->device->sdev_target;
+
+	starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
+		scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
+			scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc,
+		   sas_device_priv_data->sas_target->handle);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	    scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
+	    30, 0, TM_MUTEX_ON);
+
+ out:
+	starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	return r;
+}
+
+
+/**
+ * _scsih_host_reset - eh threads main host reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_host_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	int r, retval;
+
+	pr_info(MPT3SAS_FMT "attempting host reset! scmd(%p)\n",
+	    ioc->name, scmd);
+	scsi_print_command(scmd);
+
+	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+	    FORCE_BIG_HAMMER);
+	r = (retval < 0) ? FAILED : SUCCESS;
+	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
+	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	return r;
+}
+
+/**
+ * _scsih_fw_event_add - insert and queue up fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This adds the firmware event object into link list, then queues it up to
+ * be processed from user context.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	if (ioc->firmware_event_thread == NULL)
+		return;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	INIT_LIST_HEAD(&fw_event->list);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_WORK(&fw_event->work, _firmware_event_work);
+	queue_work(ioc->firmware_event_thread, &fw_event->work);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_free - delete fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This removes firmware event object from link list, frees associated memory.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_free(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
+	*fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_del(&fw_event->list);
+	kfree(fw_event->event_data);
+	kfree(fw_event);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+
+ /**
+ * mpt3sas_send_trigger_data_event - send event for processing trigger data
+ * @ioc: per adapter object
+ * @event_data: trigger event data
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	struct fw_event_work *fw_event;
+
+	if (ioc->is_driver_loading)
+		return;
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+	fw_event->event_data = kzalloc(sizeof(*event_data), GFP_ATOMIC);
+	if (!fw_event->event_data)
+		return;
+	fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
+	fw_event->ioc = ioc;
+	memcpy(fw_event->event_data, event_data, sizeof(*event_data));
+	_scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * _scsih_error_recovery_delete_devices - remove devices not responding
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	if (ioc->is_driver_loading)
+		return;
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * mpt3sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * _scsih_fw_event_cleanup_queue - cleanup event queue
+ * @ioc: per adapter object
+ *
+ * Walk the firmware event queue, either killing timers, or waiting
+ * for outstanding events to complete
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event, *next;
+
+	if (list_empty(&ioc->fw_event_list) ||
+	     !ioc->firmware_event_thread || in_interrupt())
+		return;
+
+	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+		if (cancel_delayed_work(&fw_event->delayed_work)) {
+			_scsih_fw_event_free(ioc, fw_event);
+			continue;
+		}
+		fw_event->cancel_pending_work = 1;
+	}
+}
+
+/**
+ * _scsih_ublock_io_all_device - unblock every device
+ * @ioc: per adapter object
+ *
+ * change the device state from block to running
+ */
+static void
+_scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (!sas_device_priv_data->block)
+			continue;
+
+		sas_device_priv_data->block = 0;
+		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
+			"device_running, handle(0x%04x)\n",
+		    sas_device_priv_data->sas_target->handle));
+		scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+	}
+}
+
+
+/**
+ * _scsih_ublock_io_device - prepare device to be deleted
+ * @ioc: per adapter object
+ * @sas_addr: sas address
+ *
+ * unblock then put device in offline state
+ */
+static void
+_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->sas_address
+		    != sas_address)
+			continue;
+		if (sas_device_priv_data->block) {
+			sas_device_priv_data->block = 0;
+			scsi_internal_device_unblock(sdev, SDEV_RUNNING);
+		}
+	}
+}
+
+/**
+ * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropiately set the sdev state.
+ */
+static void
+_scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		sas_device_priv_data->block = 1;
+		scsi_internal_device_block(sdev);
+		sdev_printk(KERN_INFO, sdev, "device_blocked, handle(0x%04x)\n",
+		    sas_device_priv_data->sas_target->handle);
+	}
+}
+
+/**
+ * _scsih_block_io_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropiately set the sdev state.
+ */
+static void
+_scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle != handle)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		sas_device_priv_data->block = 1;
+		scsi_internal_device_block(sdev);
+		sdev_printk(KERN_INFO, sdev,
+			"device_blocked, handle(0x%04x)\n", handle);
+	}
+}
+
+/**
+ * _scsih_block_io_to_children_attached_to_ex
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * attached to this expander. This function called when expander is
+ * pulled.
+ */
+static void
+_scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port;
+	struct _sas_device *sas_device;
+	struct _sas_node *expander_sibling;
+	unsigned long flags;
+
+	if (!sas_expander)
+		return;
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE) {
+			spin_lock_irqsave(&ioc->sas_device_lock, flags);
+			sas_device =
+			    mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+			   mpt3sas_port->remote_identify.sas_address);
+			if (sas_device)
+				set_bit(sas_device->handle,
+				    ioc->blocking_handles);
+			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		}
+	}
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE) {
+			expander_sibling =
+			    mpt3sas_scsih_expander_find_by_sas_address(
+			    ioc, mpt3sas_port->remote_identify.sas_address);
+			_scsih_block_io_to_children_attached_to_ex(ioc,
+			    expander_sibling);
+		}
+	}
+}
+
+/**
+ * _scsih_block_io_to_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull.
+ */
+static void
+_scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 phy_number;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		phy_number = event_data->StartPhyNum + i;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
+			_scsih_block_io_device(ioc, handle);
+	}
+}
+
+/**
+ * _scsih_tm_tr_send - send task management request
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This code is to initiate the device removal handshake protocol
+ * with controller firmware.  This function will issue target reset
+ * using high priority request queue.  It will send a sas iounit
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _sas_device *sas_device;
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	u64 sas_address = 0;
+	unsigned long flags;
+	struct _tr_list *delayed_tr;
+	u32 ioc_state;
+
+	if (ioc->remove_host) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host has been removed: handle(0x%04x)\n",
+			__func__, ioc->name, handle));
+		return;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host in pci error recovery: handle(0x%04x)\n",
+			__func__, ioc->name,
+		    handle));
+		return;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host is not operational: handle(0x%04x)\n",
+			__func__, ioc->name,
+		   handle));
+		return;
+	}
+
+	/* if PD, then return */
+	if (test_bit(handle, ioc->pd_handles))
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (sas_device && sas_device->starget &&
+	    sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		sas_address = sas_device->sas_address;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (sas_target_priv_data) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
+			ioc->name, handle,
+		    (unsigned long long)sas_address));
+		_scsih_ublock_io_device(ioc, sas_address);
+		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			return;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "DELAYED:tr:handle(0x%04x), (open)\n",
+		    ioc->name, handle));
+		return;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid,
+	    ioc->tm_tr_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpt3sas_base_put_smid_hi_priority(ioc, smid);
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
+}
+
+/**
+ * _scsih_tm_tr_complete -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the target reset completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u16 smid_sas_ctrl;
+	u32 ioc_state;
+
+	if (ioc->remove_host) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host has been removed\n", __func__, ioc->name));
+		return 1;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host in pci error recovery\n", __func__,
+			ioc->name));
+		return 1;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host is not operational\n", __func__, ioc->name));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc, pr_err(MPT3SAS_FMT
+			"spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+			ioc->name, handle,
+		    le16_to_cpu(mpi_reply->DevHandle), smid));
+		return 0;
+	}
+
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
+	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
+	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+	    le32_to_cpu(mpi_reply->IOCLogInfo),
+	    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	smid_sas_ctrl = mpt3sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
+	if (!smid_sas_ctrl) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return 1;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid_sas_ctrl,
+	    ioc->tm_sas_control_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid_sas_ctrl);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = mpi_request_tm->DevHandle;
+	mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl);
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+
+/**
+ * _scsih_sas_control_complete - completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the sas iounit control completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	Mpi2SasIoUnitControlReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (likely(mpi_reply)) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"sc_complete:handle(0x%04x), (open) "
+		"smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
+		ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
+		le16_to_cpu(mpi_reply->IOCStatus),
+		le32_to_cpu(mpi_reply->IOCLogInfo)));
+	} else {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+	}
+	return 1;
+}
+
+/**
+ * _scsih_tm_tr_volume_send - send target reset request for volumes
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _tr_list *delayed_tr;
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host reset in progress!\n",
+			__func__, ioc->name));
+		return;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			return;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "DELAYED:tr:handle(0x%04x), (open)\n",
+		    ioc->name, handle));
+		return;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+		ioc->name, handle, smid,
+	    ioc->tm_tr_volume_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpt3sas_base_put_smid_hi_priority(ioc, smid);
+}
+
+/**
+ * _scsih_tm_volume_tr_complete - target reset completion
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: host reset in progress!\n",
+			__func__, ioc->name));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc, pr_err(MPT3SAS_FMT
+			"spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+			ioc->name, handle,
+		    le16_to_cpu(mpi_reply->DevHandle), smid));
+		return 0;
+	}
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
+	    "loginfo(0x%08x), completed(%d)\n", ioc->name,
+	    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+	    le32_to_cpu(mpi_reply->IOCLogInfo),
+	    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+
+/**
+ * _scsih_check_for_pending_tm - check for pending task management
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * This will check delayed target reset list, and feed the
+ * next reqeust.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct _tr_list *delayed_tr;
+
+	if (!list_empty(&ioc->delayed_tr_volume_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	if (!list_empty(&ioc->delayed_tr_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * _scsih_check_topo_delete_events - sanity check on topo events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This routine added to better handle cable breaker.
+ *
+ * This handles the case where driver receives multiple expander
+ * add and delete events in a single shot.  When there is a delete event
+ * the routine will void any pending add events waiting in the event queue.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventDataSasTopologyChangeList_t *local_event_data;
+	u16 expander_handle;
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+	int i, reason_code;
+	u16 handle;
+
+	for (i = 0 ; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
+
+	expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+	if (expander_handle < ioc->sas_hba.num_phys) {
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+		return;
+	}
+	if (event_data->ExpStatus ==
+	    MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
+		/* put expander attached devices into blocking state */
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+		    expander_handle);
+		_scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		do {
+			handle = find_first_bit(ioc->blocking_handles,
+			    ioc->facts.MaxDevHandle);
+			if (handle < ioc->facts.MaxDevHandle)
+				_scsih_block_io_device(ioc, handle);
+		} while (test_and_clear_bit(handle, ioc->blocking_handles));
+	} else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+
+	if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+		return;
+
+	/* mark ignore flag for pending events */
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+		if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
+		    fw_event->ignore)
+			continue;
+		local_event_data = fw_event->event_data;
+		if (local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+		    local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+			if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
+			    expander_handle) {
+				dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				    "setting ignoring flag\n", ioc->name));
+				fw_event->ignore = 1;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_delete_flag - setting volume delete flag
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * This returns nothing.
+ */
+static void
+_scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+	if (raid_device && raid_device->starget &&
+	    raid_device->starget->hostdata) {
+		sas_target_priv_data =
+		    raid_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		    "setting delete flag: handle(0x%04x), "
+		    "wwid(0x%016llx)\n", ioc->name, handle,
+		    (unsigned long long) raid_device->wwid));
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
+ * @handle: input handle
+ * @a: handle for volume a
+ * @b: handle for volume b
+ *
+ * IR firmware only supports two raid volumes.  The purpose of this
+ * routine is to set the volume handle in either a or b. When the given
+ * input handle is non-zero, or when a and b have not been set before.
+ */
+static void
+_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
+{
+	if (!handle || handle == *a || handle == *b)
+		return;
+	if (!*a)
+		*a = handle;
+	else if (!*b)
+		*b = handle;
+}
+
+/**
+ * _scsih_check_ir_config_unhide_events - check for UNHIDE events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This routine will send target reset to volume, followed by target
+ * resets to the PDs. This is called when a PD has been removed, or
+ * volume has been deleted or removed. When the target reset is sent
+ * to volume, the PD target resets need to be queued to start upon
+ * completion of the volume target reset.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u16 handle, volume_handle, a, b;
+	struct _tr_list *delayed_tr;
+
+	a = 0;
+	b = 0;
+
+	/* Volume Resets for Deleted or Removed */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
+		    element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_delete_flag(ioc, volume_handle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	/* Volume Resets for UNHIDE events */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	if (a)
+		_scsih_tm_tr_volume_send(ioc, a);
+	if (b)
+		_scsih_tm_tr_volume_send(ioc, b);
+
+	/* PD target resets */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
+			continue;
+		handle = le16_to_cpu(element->PhysDiskDevHandle);
+		volume_handle = le16_to_cpu(element->VolDevHandle);
+		clear_bit(handle, ioc->pd_handles);
+		if (!volume_handle)
+			_scsih_tm_tr_send(ioc, handle);
+		else if (volume_handle == a || volume_handle == b) {
+			delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+			BUG_ON(!delayed_tr);
+			INIT_LIST_HEAD(&delayed_tr->list);
+			delayed_tr->handle = handle;
+			list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
+			    handle));
+		} else
+			_scsih_tm_tr_send(ioc, handle);
+	}
+}
+
+
+/**
+ * _scsih_check_volume_delete_events - set delete flag for volumes
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This will handle the case when the cable connected to entire volume is
+ * pulled. We will take care of setting the deleted flag so normal IO will
+ * not be sent.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrVolume_t *event_data)
+{
+	u32 state;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+	state = le32_to_cpu(event_data->NewValue);
+	if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
+	    MPI2_RAID_VOL_STATE_FAILED)
+		_scsih_set_volume_delete_flag(ioc,
+		    le16_to_cpu(event_data->VolDevHandle));
+}
+
+/**
+ * _scsih_flush_running_cmds - completing outstanding commands.
+ * @ioc: per adapter object
+ *
+ * The flushing out of all pending scmd commands following host reset,
+ * where all IO is dropped to the floor.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct scsi_cmnd *scmd;
+	u16 smid;
+	u16 count = 0;
+
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
+		if (!scmd)
+			continue;
+		count++;
+		mpt3sas_base_free_smid(ioc, smid);
+		scsi_dma_unmap(scmd);
+		if (ioc->pci_error_recovery)
+			scmd->result = DID_NO_CONNECT << 16;
+		else
+			scmd->result = DID_RESET << 16;
+		scmd->scsi_done(scmd);
+	}
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT "completing %d cmds\n",
+	    ioc->name, count));
+}
+
+/**
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ *
+ * Supporting protection 1 and 3.
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi2SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	unsigned char prot_op = scsi_get_prot_op(scmd);
+	unsigned char prot_type = scsi_get_prot_type(scmd);
+	Mpi25SCSIIORequest_t *mpi_request_3v =
+	   (Mpi25SCSIIORequest_t *)mpi_request;
+
+	if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
+		return;
+
+	if (prot_op ==  SCSI_PROT_READ_STRIP)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+	else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+	else
+		return;
+
+	switch (prot_type) {
+	case SCSI_PROT_DIF_TYPE1:
+	case SCSI_PROT_DIF_TYPE2:
+
+		/*
+		* enable ref/guard checking
+		* auto increment ref tag
+		*/
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+		    MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+		    cpu_to_be32(scsi_get_lba(scmd));
+		break;
+
+	case SCSI_PROT_DIF_TYPE3:
+
+		/*
+		* enable guard checking
+		*/
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+		break;
+	}
+
+	mpi_request_3v->EEDPBlockSize =
+	    cpu_to_le16(scmd->device->sector_size);
+	mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ *
+ * Returns nothing
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+	scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10,
+	    ascq);
+	scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
+	    SAM_STAT_CHECK_CONDITION;
+}
+
+
+/**
+ * _scsih_qcmd_lck - main scsi request entry point
+ * @scmd: pointer to scsi command object
+ * @done: function pointer to be invoked on completion
+ *
+ * The callback index is set inside `ioc->scsi_io_cb_idx`.
+ *
+ * Returns 0 on success.  If there's a failure, return either:
+ * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
+ * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
+ */
+static int
+_scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	Mpi2SCSIIORequest_t *mpi_request;
+	u32 mpi_control;
+	u16 smid;
+	u16 handle;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_SCSI)
+		scsi_print_command(scmd);
+#endif
+
+	scmd->scsi_done = done;
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+	if (ioc->pci_error_recovery || ioc->remove_host) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+
+	/* invalid device handle */
+	handle = sas_target_priv_data->handle;
+	if (handle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	}
+
+
+	/* host recovery or link resets sent via IOCTLs */
+	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	/* device has been deleted */
+	else if (sas_target_priv_data->deleted) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scmd->scsi_done(scmd);
+		return 0;
+	/* device busy with task managment */
+	} else if (sas_target_priv_data->tm_busy ||
+	    sas_device_priv_data->block)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+
+	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_READ;
+	else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
+	else
+		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
+
+	/* set tags */
+	if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
+		if (scmd->device->tagged_supported) {
+			if (scmd->device->ordered_tags)
+				mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
+			else
+				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+		} else
+			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+	} else
+		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+
+	if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
+	    scmd->cmd_len != 32)
+		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
+
+	smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+	_scsih_setup_eedp(ioc, scmd, mpi_request);
+
+	if (scmd->cmd_len == 32)
+		mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
+	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT)
+		mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+	else
+		mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
+	mpi_request->Control = cpu_to_le32(mpi_control);
+	mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
+	mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
+	mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+	mpi_request->SenseBufferLowAddress =
+	    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+	mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
+	int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
+	    mpi_request->LUN);
+	memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+
+	if (mpi_request->DataLength) {
+		if (ioc->build_sg_scmd(ioc, scmd, smid)) {
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	} else
+		ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
+
+	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
+		if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
+			mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
+			    MPI25_SCSIIO_IOFLAGS_FAST_PATH);
+			mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
+		} else
+			mpt3sas_base_put_smid_scsi_io(ioc, smid, handle);
+	} else
+		mpt3sas_base_put_smid_default(ioc, smid);
+	return 0;
+
+ out:
+	return SCSI_MLQUEUE_HOST_BUSY;
+}
+static DEF_SCSI_QCMD(_scsih_qcmd)
+
+
+/**
+ * _scsih_normalize_sense - normalize descriptor and fixed format sense data
+ * @sense_buffer: sense data returned by target
+ * @data: normalized skey/asc/ascq
+ *
+ * Return nothing.
+ */
+static void
+_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
+{
+	if ((sense_buffer[0] & 0x7F) >= 0x72) {
+		/* descriptor format */
+		data->skey = sense_buffer[1] & 0x0F;
+		data->asc = sense_buffer[2];
+		data->ascq = sense_buffer[3];
+	} else {
+		/* fixed format */
+		data->skey = sense_buffer[2] & 0x0F;
+		data->asc = sense_buffer[12];
+		data->ascq = sense_buffer[13];
+	}
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_reply: reply mf payload returned from firmware
+ *
+ * scsi_status - SCSI Status code returned from target device
+ * scsi_state - state info associated with SCSI_IO determined by ioc
+ * ioc_status - ioc supplied status info
+ *
+ * Return nothing.
+ */
+static void
+_scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
+{
+	u32 response_info;
+	u8 *response_bytes;
+	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	u8 scsi_state = mpi_reply->SCSIState;
+	u8 scsi_status = mpi_reply->SCSIStatus;
+	char *desc_ioc_state = NULL;
+	char *desc_scsi_status = NULL;
+	char *desc_scsi_state = ioc->tmp_string;
+	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+	struct _sas_device *sas_device = NULL;
+	unsigned long flags;
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	device_str = "volume";
+
+	if (log_info == 0x31170000)
+		return;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_SUCCESS:
+		desc_ioc_state = "success";
+		break;
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+		desc_ioc_state = "invalid function";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+		desc_ioc_state = "scsi recovered error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+		desc_ioc_state = "scsi invalid dev handle";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		desc_ioc_state = "scsi device not there";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		desc_ioc_state = "scsi data overrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		desc_ioc_state = "scsi data underrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+		desc_ioc_state = "scsi io data error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+		desc_ioc_state = "scsi protocol error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+		desc_ioc_state = "scsi task terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		desc_ioc_state = "scsi residual mismatch";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+		desc_ioc_state = "scsi task mgmt failed";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		desc_ioc_state = "scsi ioc terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		desc_ioc_state = "scsi ext terminated";
+		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
+	default:
+		desc_ioc_state = "unknown";
+		break;
+	}
+
+	switch (scsi_status) {
+	case MPI2_SCSI_STATUS_GOOD:
+		desc_scsi_status = "good";
+		break;
+	case MPI2_SCSI_STATUS_CHECK_CONDITION:
+		desc_scsi_status = "check condition";
+		break;
+	case MPI2_SCSI_STATUS_CONDITION_MET:
+		desc_scsi_status = "condition met";
+		break;
+	case MPI2_SCSI_STATUS_BUSY:
+		desc_scsi_status = "busy";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE:
+		desc_scsi_status = "intermediate";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
+		desc_scsi_status = "intermediate condmet";
+		break;
+	case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
+		desc_scsi_status = "reservation conflict";
+		break;
+	case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
+		desc_scsi_status = "command terminated";
+		break;
+	case MPI2_SCSI_STATUS_TASK_SET_FULL:
+		desc_scsi_status = "task set full";
+		break;
+	case MPI2_SCSI_STATUS_ACA_ACTIVE:
+		desc_scsi_status = "aca active";
+		break;
+	case MPI2_SCSI_STATUS_TASK_ABORTED:
+		desc_scsi_status = "task aborted";
+		break;
+	default:
+		desc_scsi_status = "unknown";
+		break;
+	}
+
+	desc_scsi_state[0] = '\0';
+	if (!scsi_state)
+		desc_scsi_state = " ";
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		strcat(desc_scsi_state, "response info ");
+	if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+		strcat(desc_scsi_state, "state terminated ");
+	if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
+		strcat(desc_scsi_state, "no status ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
+		strcat(desc_scsi_state, "autosense failed ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
+		strcat(desc_scsi_state, "autosense valid ");
+
+	scsi_print_command(scmd);
+
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
+		    device_str, (unsigned long long)priv_target->sas_address);
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		    priv_target->sas_address);
+		if (sas_device) {
+			pr_warn(MPT3SAS_FMT
+				"\tsas_address(0x%016llx), phy(%d)\n",
+				ioc->name, (unsigned long long)
+			    sas_device->sas_address, sas_device->phy);
+			pr_warn(MPT3SAS_FMT
+			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+			    ioc->name, (unsigned long long)
+			    sas_device->enclosure_logical_id, sas_device->slot);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	pr_warn(MPT3SAS_FMT
+		"\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n",
+		ioc->name, le16_to_cpu(mpi_reply->DevHandle),
+	    desc_ioc_state, ioc_status, smid);
+	pr_warn(MPT3SAS_FMT
+		"\trequest_len(%d), underflow(%d), resid(%d)\n",
+		ioc->name, scsi_bufflen(scmd), scmd->underflow,
+	    scsi_get_resid(scmd));
+	pr_warn(MPT3SAS_FMT
+		"\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n",
+		ioc->name, le16_to_cpu(mpi_reply->TaskTag),
+	    le32_to_cpu(mpi_reply->TransferCount), scmd->result);
+	pr_warn(MPT3SAS_FMT
+		"\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n",
+		ioc->name, desc_scsi_status,
+	    scsi_status, desc_scsi_state, scsi_state);
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		pr_warn(MPT3SAS_FMT
+			"\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
+			ioc->name, data.skey,
+		    data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
+	}
+
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
+		response_info = le32_to_cpu(mpi_reply->ResponseInfo);
+		response_bytes = (u8 *)&response_info;
+		_scsih_response_code(ioc, response_bytes[0]);
+	}
+}
+#endif
+
+/**
+ * _scsih_turn_on_fault_led - illuminate Fault LED
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: process
+ *
+ * Return nothing.
+ */
+static void
+_scsih_turn_on_fault_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SepReply_t mpi_reply;
+	Mpi2SepRequest_t mpi_request;
+
+	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+	mpi_request.SlotStatus =
+	    cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
+	mpi_request.DevHandle = cpu_to_le16(handle);
+	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
+	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+	    &mpi_request)) != 0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+			ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
+		    le32_to_cpu(mpi_reply.IOCLogInfo)));
+		return;
+	}
+}
+
+/**
+ * _scsih_send_event_to_turn_on_fault_led - fire delayed event
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_send_event_to_turn_on_fault_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_TURN_ON_FAULT_LED;
+	fw_event->device_handle = handle;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * _scsih_smart_predicted_fault - process smart errors
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	Mpi2EventNotificationReply_t *event_reply;
+	Mpi2EventDataSasDeviceStatusChange_t *event_data;
+	struct _sas_device *sas_device;
+	ssize_t sz;
+	unsigned long flags;
+
+	/* only handle non-raid devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+	starget = sas_device->starget;
+	sas_target_priv_data = starget->hostdata;
+
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
+	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+	starget_printk(KERN_WARNING, starget, "predicted fault\n");
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
+		_scsih_send_event_to_turn_on_fault_led(ioc, handle);
+
+	/* insert into event log */
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	     sizeof(Mpi2EventDataSasDeviceStatusChange_t);
+	event_reply = kzalloc(sz, GFP_KERNEL);
+	if (!event_reply) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+	event_reply->Event =
+	    cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+	event_reply->MsgLength = sz/4;
+	event_reply->EventDataLength =
+	    cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
+	event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
+	    event_reply->EventData;
+	event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
+	event_data->ASC = 0x5D;
+	event_data->DevHandle = cpu_to_le16(handle);
+	event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
+	mpt3sas_ctl_add_to_event_log(ioc, event_reply);
+	kfree(event_reply);
+}
+
+/**
+ * _scsih_io_done - scsi request callback
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when using _scsih_qcmd.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	Mpi2SCSIIORequest_t *mpi_request;
+	Mpi2SCSIIOReply_t *mpi_reply;
+	struct scsi_cmnd *scmd;
+	u16 ioc_status;
+	u32 xfer_cnt;
+	u8 scsi_state;
+	u8 scsi_status;
+	u32 log_info;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 response_code = 0;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
+	if (scmd == NULL)
+		return 1;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	if (mpi_reply == NULL) {
+		scmd->result = DID_OK << 16;
+		goto out;
+	}
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	     sas_device_priv_data->sas_target->deleted) {
+		scmd->result = DID_NO_CONNECT << 16;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+
+	/* turning off TLR */
+	scsi_state = mpi_reply->SCSIState;
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		response_code =
+		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
+	if (!sas_device_priv_data->tlr_snoop_check) {
+		sas_device_priv_data->tlr_snoop_check++;
+		if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
+		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
+			sas_device_priv_data->flags &=
+			    ~MPT_DEVICE_TLR_ON;
+	}
+
+	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
+	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+	else
+		log_info = 0;
+	ioc_status &= MPI2_IOCSTATUS_MASK;
+	scsi_status = mpi_reply->SCSIStatus;
+
+	if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+	    (scsi_status == MPI2_SCSI_STATUS_BUSY ||
+	     scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
+	     scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
+		ioc_status = MPI2_IOCSTATUS_SUCCESS;
+	}
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		const void *sense_data = mpt3sas_base_get_sense_buffer(ioc,
+		    smid);
+		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
+		    le32_to_cpu(mpi_reply->SenseCount));
+		memcpy(scmd->sense_buffer, sense_data, sz);
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		/* failure prediction threshold exceeded */
+		if (data.asc == 0x5D)
+			_scsih_smart_predicted_fault(ioc,
+			    le16_to_cpu(mpi_reply->DevHandle));
+		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
+	}
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_BUSY:
+	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		scmd->result = SAM_STAT_BUSY;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		scmd->result = DID_NO_CONNECT << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		if (sas_device_priv_data->block) {
+			scmd->result = DID_TRANSPORT_DISRUPTED << 16;
+			goto out;
+		}
+		if (log_info == 0x31110630) {
+			if (scmd->retries > 2) {
+				scmd->result = DID_NO_CONNECT << 16;
+				scsi_device_set_state(scmd->device,
+				    SDEV_OFFLINE);
+			} else {
+				scmd->result = DID_SOFT_ERROR << 16;
+				scmd->device->expecting_cc_ua = 1;
+			}
+			break;
+		}
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else
+			scmd->result = (DID_OK << 16) | scsi_status;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		scmd->result = (DID_OK << 16) | scsi_status;
+
+		if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
+			break;
+
+		if (xfer_cnt < scmd->underflow) {
+			if (scsi_status == SAM_STAT_BUSY)
+				scmd->result = SAM_STAT_BUSY;
+			else
+				scmd->result = DID_SOFT_ERROR << 16;
+		} else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
+			mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
+			mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
+			scmd->result = (DRIVER_SENSE << 24) |
+			    SAM_STAT_CHECK_CONDITION;
+			scmd->sense_buffer[0] = 0x70;
+			scmd->sense_buffer[2] = ILLEGAL_REQUEST;
+			scmd->sense_buffer[12] = 0x20;
+			scmd->sense_buffer[13] = 0;
+		}
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		scsi_set_resid(scmd, 0);
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI2_IOCSTATUS_SUCCESS:
+		scmd->result = (DID_OK << 16) | scsi_status;
+		if (response_code ==
+		    MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
+		    (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS)))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+	case MPI2_IOCSTATUS_INVALID_SGL:
+	case MPI2_IOCSTATUS_INTERNAL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FIELD:
+	case MPI2_IOCSTATUS_INVALID_STATE:
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	default:
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+
+	}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
+		_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
+#endif
+
+ out:
+
+	scsi_dma_unmap(scmd);
+
+	scmd->scsi_done(scmd);
+	return 1;
+}
+
+/**
+ * _scsih_sas_host_refresh - refreshing sas host object contents
+ * @ioc: per adapter object
+ * Context: user
+ *
+ * During port enable, fw will send topology events for every device. Its
+ * possible that the handles may change from the previous setting, so this
+ * code keeping handles updating if changed.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 sz;
+	u16 ioc_status;
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	u16 attached_handle;
+	u8 link_rate;
+
+	dtmprintk(ioc, pr_info(MPT3SAS_FMT
+	    "updating handles for sas_host(0x%016llx)\n",
+	    ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
+
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
+	    * sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz)) != 0)
+		goto out;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+			    PhyData[0].ControllerDevHandle);
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
+		    AttachedDevHandle);
+		if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
+		mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
+		    attached_handle, i, link_rate);
+	}
+ out:
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_sas_host_add - create sas host object
+ * @ioc: per adapter object
+ *
+ * Creating host side data object, stored in ioc->sas_hba
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasPhyPage0_t phy_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2SasEnclosurePage0_t enclosure_pg0;
+	u16 ioc_status;
+	u16 sz;
+	u8 device_missing_delay;
+
+	mpt3sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
+	if (!ioc->sas_hba.num_phys) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	/* sas_iounit page 0 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	ioc->io_missing_delay =
+	    sas_iounit_pg1->IODeviceMissingDelay;
+	device_missing_delay =
+	    sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		ioc->device_missing_delay = (device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		ioc->device_missing_delay = device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+
+	ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
+	ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!ioc->sas_hba.phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+		    i))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			goto out;
+		}
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			goto out;
+		}
+
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+			    PhyData[0].ControllerDevHandle);
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		ioc->sas_hba.phy[i].phy_id = i;
+		mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
+		    phy_pg0, ioc->sas_hba.parent_dev);
+	}
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->sas_hba.enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	pr_info(MPT3SAS_FMT
+		"host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
+		ioc->name, ioc->sas_hba.handle,
+	    (unsigned long long) ioc->sas_hba.sas_address,
+	    ioc->sas_hba.num_phys) ;
+
+	if (ioc->sas_hba.enclosure_handle) {
+		if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+		    &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+		   ioc->sas_hba.enclosure_handle)))
+			ioc->sas_hba.enclosure_logical_id =
+			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+	}
+
+ out:
+	kfree(sas_iounit_pg1);
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_expander_add -  creating expander object
+ * @ioc: per adapter object
+ * @handle: expander handle
+ *
+ * Creating expander object, stored in ioc->sas_expander_list.
+ *
+ * Return 0 for success, else error.
+ */
+static int
+_scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ExpanderPage1_t expander_pg1;
+	Mpi2SasEnclosurePage0_t enclosure_pg0;
+	u32 ioc_status;
+	u16 parent_handle;
+	u64 sas_address, sas_address_parent = 0;
+	int i;
+	unsigned long flags;
+	struct _sas_port *mpt3sas_port = NULL;
+
+	int rc = 0;
+
+	if (!handle)
+		return -1;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
+		return -1;
+
+	if ((mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* handle out of order topology events */
+	parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
+	if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
+	    != 0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if (sas_address_parent != ioc->sas_hba.sas_address) {
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+		    sas_address_parent);
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (!sas_expander) {
+			rc = _scsih_expander_add(ioc, parent_handle);
+			if (rc != 0)
+				return rc;
+		}
+	}
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_address = le64_to_cpu(expander_pg0.SASAddress);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (sas_expander)
+		return 0;
+
+	sas_expander = kzalloc(sizeof(struct _sas_node),
+	    GFP_KERNEL);
+	if (!sas_expander) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	sas_expander->handle = handle;
+	sas_expander->num_phys = expander_pg0.NumPhys;
+	sas_expander->sas_address_parent = sas_address_parent;
+	sas_expander->sas_address = sas_address;
+
+	pr_info(MPT3SAS_FMT "expander_add: handle(0x%04x)," \
+	    " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
+	    handle, parent_handle, (unsigned long long)
+	    sas_expander->sas_address, sas_expander->num_phys);
+
+	if (!sas_expander->num_phys)
+		goto out_fail;
+	sas_expander->phy = kcalloc(sas_expander->num_phys,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!sas_expander->phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+
+	INIT_LIST_HEAD(&sas_expander->sas_port_list);
+	mpt3sas_port = mpt3sas_transport_port_add(ioc, handle,
+	    sas_address_parent);
+	if (!mpt3sas_port) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+	sas_expander->parent_dev = &mpt3sas_port->rphy->dev;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+		sas_expander->phy[i].handle = handle;
+		sas_expander->phy[i].phy_id = i;
+
+		if ((mpt3sas_transport_add_expander_phy(ioc,
+		    &sas_expander->phy[i], expander_pg1,
+		    sas_expander->parent_dev))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+	}
+
+	if (sas_expander->enclosure_handle) {
+		if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+		    &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+		   sas_expander->enclosure_handle)))
+			sas_expander->enclosure_logical_id =
+			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+	}
+
+	_scsih_expander_node_add(ioc, sas_expander);
+	 return 0;
+
+ out_fail:
+
+	if (mpt3sas_port)
+		mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+		    sas_address_parent);
+	kfree(sas_expander);
+	return rc;
+}
+
+/**
+ * mpt3sas_expander_remove - removing expander object
+ * @ioc: per adapter object
+ * @sas_address: expander sas_address
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
+{
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address);
+	if (sas_expander)
+		list_del(&sas_expander->list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	if (sas_expander)
+		_scsih_expander_node_remove(ioc, sas_expander);
+}
+
+/**
+ * _scsih_done -  internal SCSI_IO callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated SCSI_IO.
+ * The callback index passed is `ioc->scsih_cb_idx`
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+static u8
+_scsih_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (ioc->scsih_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->scsih_cmds.smid != smid)
+		return 1;
+	ioc->scsih_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		memcpy(ioc->scsih_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+		ioc->scsih_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->scsih_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->scsih_cmds.done);
+	return 1;
+}
+
+
+
+
+#define MPT3_MAX_LUNS (255)
+
+
+/**
+ * _scsih_check_access_status - check access flags
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @handle: sas device handle
+ * @access_flags: errors returned during discovery of the device
+ *
+ * Return 0 for success, else failure
+ */
+static u8
+_scsih_check_access_status(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u16 handle, u8 access_status)
+{
+	u8 rc = 1;
+	char *desc = NULL;
+
+	switch (access_status) {
+	case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
+		rc = 0;
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
+		desc = "sata capability failed";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
+		desc = "sata affiliation conflict";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
+		desc = "route not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
+		desc = "smp error not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
+		desc = "device blocked";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
+		desc = "sata initialization failed";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+
+	if (!rc)
+		return 0;
+
+	pr_err(MPT3SAS_FMT
+		"discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n",
+		ioc->name, desc, (unsigned long long)sas_address, handle);
+	return rc;
+}
+
+/**
+ * _scsih_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @parent_sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
+ * @phy_numberv: phy number
+ * @link_rate: new link rate
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
+	u64 parent_sas_address, u16 handle, u8 phy_number, u8 link_rate)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	struct _sas_device *sas_device;
+	u32 ioc_status;
+	unsigned long flags;
+	u64 sas_address;
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	u32 device_info;
+
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return;
+
+	/* wide port handling ~ we need only handle device once for the phy that
+	 * is matched in sas device page zero
+	 */
+	if (phy_number != sas_device_pg0.PhyNum)
+		return;
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    sas_address);
+
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+
+	if (unlikely(sas_device->handle != handle)) {
+		starget = sas_device->starget;
+		sas_target_priv_data = starget->hostdata;
+		starget_printk(KERN_INFO, starget,
+			"handle changed from(0x%04x) to (0x%04x)!!!\n",
+			sas_device->handle, handle);
+		sas_target_priv_data->handle = handle;
+		sas_device->handle = handle;
+	}
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		pr_err(MPT3SAS_FMT
+			"device is not present handle(0x%04x), flags!!!\n",
+			ioc->name, handle);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus)) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	_scsih_ublock_io_device(ioc, sas_address);
+
+}
+
+/**
+ * _scsih_add_device -  creating sas device object
+ * @ioc: per adapter object
+ * @handle: sas device handle
+ * @phy_num: phy number end device attached to
+ * @is_pd: is this hidden raid component
+ *
+ * Creating end device object, stored in ioc->sas_device_list.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
+	u8 is_pd)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2SasEnclosurePage0_t enclosure_pg0;
+	struct _sas_device *sas_device;
+	u32 ioc_status;
+	u64 sas_address;
+	u32 device_info;
+	unsigned long flags;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return -1;
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		pr_err(MPT3SAS_FMT "device is not present handle(0x04%x)!!!\n",
+			ioc->name, handle);
+		return -1;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus))
+		return -1;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    sas_address);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (sas_device)
+		return -1;
+
+	sas_device = kzalloc(sizeof(struct _sas_device),
+	    GFP_KERNEL);
+	if (!sas_device) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	sas_device->handle = handle;
+	if (_scsih_get_sas_address(ioc,
+	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+	    &sas_device->sas_address_parent) != 0)
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+	sas_device->enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	sas_device->slot =
+	    le16_to_cpu(sas_device_pg0.Slot);
+	sas_device->device_info = device_info;
+	sas_device->sas_address = sas_address;
+	sas_device->phy = sas_device_pg0.PhyNum;
+	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+
+	/* get enclosure_logical_id */
+	if (sas_device->enclosure_handle && !(mpt3sas_config_get_enclosure_pg0(
+	   ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+	   sas_device->enclosure_handle)))
+		sas_device->enclosure_logical_id =
+		    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+
+	/* get device name */
+	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
+
+	if (ioc->wait_for_discovery_to_complete)
+		_scsih_sas_device_init_add(ioc, sas_device);
+	else
+		_scsih_sas_device_add(ioc, sas_device);
+
+	return 0;
+}
+
+/**
+ * _scsih_remove_device -  removing sas device object
+ * @ioc: per adapter object
+ * @sas_device_delete: the sas_device object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__,
+	    sas_device->handle, (unsigned long long)
+	    sas_device->sas_address));
+
+	if (sas_device->starget && sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, sas_device->sas_address);
+		sas_target_priv_data->handle =
+		     MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+	mpt3sas_transport_port_remove(ioc,
+		    sas_device->sas_address,
+		    sas_device->sas_address_parent);
+
+	pr_info(MPT3SAS_FMT
+		"removing handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, sas_device->handle,
+	    (unsigned long long) sas_device->sas_address);
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name, __func__,
+	    sas_device->handle, (unsigned long long)
+	    sas_device->sas_address));
+
+	kfree(sas_device);
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_sas_topology_change_event_debug - debug for topology event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 phy_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->ExpStatus) {
+	case MPI2_EVENT_SAS_TOPO_ES_ADDED:
+		status_str = "add";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+	case 0:
+		status_str =  "responding";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	pr_info(MPT3SAS_FMT "sas topology change: (%s)\n",
+	    ioc->name, status_str);
+	pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \
+	    "start_phy(%02d), count(%d)\n",
+	    le16_to_cpu(event_data->ExpanderDevHandle),
+	    le16_to_cpu(event_data->EnclosureHandle),
+	    event_data->StartPhyNum, event_data->NumEntries);
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		phy_number = event_data->StartPhyNum + i;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+			status_str = "target add";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+			status_str = "link rate change";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \
+		    " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
+		    handle, status_str, link_rate, prev_link_rate);
+
+	}
+}
+#endif
+
+/**
+ * _scsih_sas_topology_change_event - handle topology changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static int
+_scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	int i;
+	u16 parent_handle, handle;
+	u16 reason_code;
+	u8 phy_number, max_phys;
+	struct _sas_node *sas_expander;
+	u64 sas_address;
+	unsigned long flags;
+	u8 link_rate, prev_link_rate;
+	Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_topology_change_event_debug(ioc, event_data);
+#endif
+
+	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+		return 0;
+
+	if (!ioc->sas_hba.num_phys)
+		_scsih_sas_host_add(ioc);
+	else
+		_scsih_sas_host_refresh(ioc);
+
+	if (fw_event->ignore) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"ignoring expander event\n", ioc->name));
+		return 0;
+	}
+
+	parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+
+	/* handle expander add */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
+		if (_scsih_expander_add(ioc, parent_handle) != 0)
+			return 0;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+	    parent_handle);
+	if (sas_expander) {
+		sas_address = sas_expander->sas_address;
+		max_phys = sas_expander->num_phys;
+	} else if (parent_handle < ioc->sas_hba.num_phys) {
+		sas_address = ioc->sas_hba.sas_address;
+		max_phys = ioc->sas_hba.num_phys;
+	} else {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle siblings events */
+	for (i = 0; i < event_data->NumEntries; i++) {
+		if (fw_event->ignore) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+				"ignoring expander event\n", ioc->name));
+			return 0;
+		}
+		if (ioc->remove_host || ioc->pci_error_recovery)
+			return 0;
+		phy_number = event_data->StartPhyNum + i;
+		if (phy_number >= max_phys)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if ((event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
+		    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
+				continue;
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			if (link_rate == prev_link_rate)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate);
+
+			if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+				break;
+
+			_scsih_check_device(ioc, sas_address, handle,
+			    phy_number, link_rate);
+
+
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate);
+
+			_scsih_add_device(ioc, handle, phy_number, 0);
+
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+
+			_scsih_device_remove_by_handle(ioc, handle);
+			break;
+		}
+	}
+
+	/* handle expander removal */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
+	    sas_expander)
+		mpt3sas_expander_remove(ioc, sas_address);
+
+	return 0;
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_sas_device_status_change_event_debug - debug for device event
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+		reason_str = "smart data";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+		reason_str = "unsupported device discovered";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+		reason_str = "internal device reset";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+		reason_str = "internal task abort set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+		reason_str = "internal clear task set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+		reason_str = "internal query task";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
+		reason_str = "sata init failure";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+		reason_str = "internal device reset complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
+		reason_str = "internal async notification";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality complete";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+	pr_info(MPT3SAS_FMT "device status change: (%s)\n"
+	    "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
+	    ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
+	    (unsigned long long)le64_to_cpu(event_data->SASAddress),
+	    le16_to_cpu(event_data->TaskTag));
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
+		pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+		    event_data->ASC, event_data->ASCQ);
+	pr_info("\n");
+}
+#endif
+
+/**
+ * _scsih_sas_device_status_change_event - handle device status change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct MPT3SAS_TARGET *target_priv_data;
+	struct _sas_device *sas_device;
+	u64 sas_address;
+	unsigned long flags;
+	Mpi2EventDataSasDeviceStatusChange_t *event_data =
+	    fw_event->event_data;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_device_status_change_event_debug(ioc,
+		     event_data);
+#endif
+
+	/* In MPI Revision K (0xC), the internal device reset complete was
+	 * implemented, so avoid setting tm_busy flag for older firmware.
+	 */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+		return;
+
+	if (event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+	   event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(event_data->SASAddress);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    sas_address);
+
+	if (!sas_device || !sas_device->starget) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+
+	target_priv_data = sas_device->starget->hostdata;
+	if (!target_priv_data) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+
+	if (event_data->ReasonCode ==
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
+		target_priv_data->tm_busy = 1;
+	else
+		target_priv_data->tm_busy = 0;
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+		reason_str = "enclosure add";
+		break;
+	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+		reason_str = "enclosure remove";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+
+	pr_info(MPT3SAS_FMT "enclosure status change: (%s)\n"
+	    "\thandle(0x%04x), enclosure logical id(0x%016llx)"
+	    " number slots(%d)\n", ioc->name, reason_str,
+	    le16_to_cpu(event_data->EnclosureHandle),
+	    (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
+	    le16_to_cpu(event_data->StartSlot));
+}
+#endif
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
+		     fw_event->event_data);
+#endif
+}
+
+/**
+ * _scsih_sas_broadcast_primitive_event - handle broadcast events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct scsi_cmnd *scmd;
+	struct scsi_device *sdev;
+	u16 smid, handle;
+	u32 lun;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 termination_count;
+	u32 query_count;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
+	u16 ioc_status;
+	unsigned long flags;
+	int r;
+	u8 max_retries = 0;
+	u8 task_abort_retries;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	pr_info(MPT3SAS_FMT
+		"%s: enter: phy number(%d), width(%d)\n",
+		ioc->name, __func__, event_data->PhyNum,
+	     event_data->PortWidth);
+
+	_scsih_block_io_all_device(ioc);
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	mpi_reply = ioc->tm_cmds.reply;
+ broadcast_aen_retry:
+
+	/* sanity checks for retrying this loop */
+	if (max_retries++ == 5) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: giving up\n",
+		    ioc->name, __func__));
+		goto out;
+	} else if (max_retries > 1)
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: %d retry\n",
+		    ioc->name, __func__, max_retries - 1));
+
+	termination_count = 0;
+	query_count = 0;
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		if (ioc->shost_recovery)
+			goto out;
+		scmd = _scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		sdev = scmd->device;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+			continue;
+		 /* skip hidden raid components */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue;
+		 /* skip volumes */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_VOLUME)
+			continue;
+
+		handle = sas_device_priv_data->sas_target->handle;
+		lun = sas_device_priv_data->lun;
+		query_count++;
+
+		if (ioc->shost_recovery)
+			goto out;
+
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		r = mpt3sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, 0,
+		    TM_MUTEX_OFF);
+		if (r == FAILED) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: FAILED when sending "
+			    "QUERY_TASK: scmd(%p)\n", scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+		    & MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			sdev_printk(KERN_WARNING, sdev,
+				"query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n",
+				ioc_status, scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		/* see if IO is still owned by IOC and target */
+		if (mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		     mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			continue;
+		}
+		task_abort_retries = 0;
+ tm_retry:
+		if (task_abort_retries++ == 60) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "%s: ABORT_TASK: giving up\n", ioc->name,
+			    __func__));
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		if (ioc->shost_recovery)
+			goto out_no_lock;
+
+		r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
+		    sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
+		    scmd->serial_number, TM_MUTEX_OFF);
+		if (r == FAILED) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
+			    "scmd(%p)\n", scmd);
+			goto tm_retry;
+		}
+
+		if (task_abort_retries > 1)
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
+			    " scmd(%p)\n",
+			    task_abort_retries - 1, scmd);
+
+		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	}
+
+	if (ioc->broadcast_aen_pending) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: loop back due to pending AEN\n",
+			ioc->name, __func__));
+		 ioc->broadcast_aen_pending = 0;
+		 goto broadcast_aen_retry;
+	}
+
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ out_no_lock:
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	    "%s - exit, query_count = %d termination_count = %d\n",
+	    ioc->name, __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	if (!ioc->shost_recovery)
+		_scsih_ublock_io_all_device(ioc);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+}
+
+/**
+ * _scsih_sas_discovery_event - handle discovery events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
+		pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
+		    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+		    "start" : "stop");
+	if (event_data->DiscoveryStatus)
+		pr_info("discovery_status(0x%08x)",
+		    le32_to_cpu(event_data->DiscoveryStatus));
+	pr_info("\n");
+	}
+#endif
+
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
+	    !ioc->sas_hba.num_phys) {
+		if (disable_discovery > 0 && ioc->shost_recovery) {
+			/* Wait for the reset to complete */
+			while (ioc->shost_recovery)
+				ssleep(1);
+		}
+		_scsih_sas_host_add(ioc);
+	}
+}
+
+/**
+ * _scsih_ir_fastpath - turn on fastpath for IR physdisk
+ * @ioc: per adapter object
+ * @handle: device handle for physical disk
+ * @phys_disk_num: physical disk number
+ *
+ * Return 0 for success, else failure.
+ */
+static int
+_scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+	u8 issue_reset = 0;
+	int rc = 0;
+	u16 ioc_status;
+	u32 log_info;
+
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
+	mpi_request->PhysDiskNum = phys_disk_num;
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT "IR RAID_ACTION: turning fast "\
+	    "path on for handle(0x%04x), phys_disk_num (0x%02x)\n", ioc->name,
+	    handle, phys_disk_num));
+
+	init_completion(&ioc->scsih_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		if (!(ioc->scsih_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->scsih_cmds.reply;
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+		if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+			log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+		else
+			log_info = 0;
+		ioc_status &= MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "IR RAID_ACTION: failed: ioc_status(0x%04x), "
+			    "loginfo(0x%08x)!!!\n", ioc->name, ioc_status,
+			    log_info));
+			rc = -EFAULT;
+		} else
+			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			    "IR RAID_ACTION: completed successfully\n",
+			    ioc->name));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+	return rc;
+}
+
+/**
+ * _scsih_reprobe_lun - reprobing lun
+ * @sdev: scsi device struct
+ * @no_uld_attach: sdev->no_uld_attach flag setting
+ *
+ **/
+static void
+_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
+{
+	int rc;
+	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
+	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
+	    sdev->no_uld_attach ? "hidding" : "exposing");
+	rc = scsi_device_reprobe(sdev);
+}
+
+/**
+ * _scsih_sas_volume_add - add new volume
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_volume_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	u64 wwid;
+	u16 handle = le16_to_cpu(element->VolDevHandle);
+	int rc;
+
+	mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+	if (!wwid) {
+		pr_err(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name,
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (raid_device)
+		return;
+
+	raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+	if (!raid_device) {
+		pr_err(MPT3SAS_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name,
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	raid_device->id = ioc->sas_id++;
+	raid_device->channel = RAID_CHANNEL;
+	raid_device->handle = handle;
+	raid_device->wwid = wwid;
+	_scsih_raid_device_add(ioc, raid_device);
+	if (!ioc->wait_for_discovery_to_complete) {
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		_scsih_determine_boot_device(ioc, raid_device, 1);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_sas_volume_delete - delete volume
+ * @ioc: per adapter object
+ * @handle: volume device handle
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget = NULL;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+	if (raid_device) {
+		if (raid_device->starget) {
+			starget = raid_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+		}
+		pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
+			ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		list_del(&raid_device->list);
+		kfree(raid_device);
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	if (starget)
+		scsi_remove_target(&starget->dev);
+}
+
+/**
+ * _scsih_sas_pd_expose - expose pd component to /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (sas_device) {
+		sas_device->volume_handle = 0;
+		sas_device->volume_wwid = 0;
+		clear_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags &=
+			    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* exposing raid component */
+	if (starget)
+		starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
+}
+
+/**
+ * _scsih_sas_pd_hide - hide pd component from /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	u16 volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	mpt3sas_config_get_volume_handle(ioc, handle, &volume_handle);
+	if (volume_handle)
+		mpt3sas_config_get_volume_wwid(ioc, volume_handle,
+		    &volume_wwid);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	if (sas_device) {
+		set_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+			sas_device->volume_handle = volume_handle;
+			sas_device->volume_wwid = volume_wwid;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* hiding raid component */
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+	if (starget)
+		starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
+}
+
+/**
+ * _scsih_sas_pd_delete - delete pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_delete(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	_scsih_device_remove_by_handle(ioc, handle);
+}
+
+/**
+ * _scsih_sas_pd_add - remove pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u64 sas_address;
+	u16 parent_handle;
+
+	set_bit(handle, ioc->pd_handles);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device) {
+		_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+	if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+		mpt3sas_transport_update_links(ioc, sas_address, handle,
+		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+	_scsih_add_device(ioc, handle, 0, 1);
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	u8 element_type;
+	int i;
+	char *reason_str = NULL, *element_str = NULL;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+
+	pr_info(MPT3SAS_FMT "raid config change: (%s), elements(%d)\n",
+	    ioc->name, (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
+	    "foreign" : "native", event_data->NumElements);
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			reason_str = "add";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			reason_str = "remove";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
+			reason_str = "no change";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			reason_str = "hide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			reason_str = "unhide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+			reason_str = "volume_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+			reason_str = "volume_deleted";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			reason_str = "pd_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			reason_str = "pd_deleted";
+			break;
+		default:
+			reason_str = "unknown reason";
+			break;
+		}
+		element_type = le16_to_cpu(element->ElementFlags) &
+		    MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
+		switch (element_type) {
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
+			element_str = "volume";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
+			element_str = "phys disk";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
+			element_str = "hot spare";
+			break;
+		default:
+			element_str = "unknown element";
+			break;
+		}
+		pr_info("\t(%s:%s), vol handle(0x%04x), " \
+		    "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
+		    reason_str, le16_to_cpu(element->VolDevHandle),
+		    le16_to_cpu(element->PhysDiskDevHandle),
+		    element->PhysDiskNum);
+	}
+}
+#endif
+
+/**
+ * _scsih_sas_ir_config_change_event - handle ir configuration change events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u8 foreign_config;
+	Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
+
+#endif
+
+	foreign_config = (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	if (ioc->shost_recovery) {
+
+		for (i = 0; i < event_data->NumElements; i++, element++) {
+			if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
+				_scsih_ir_fastpath(ioc,
+					le16_to_cpu(element->PhysDiskDevHandle),
+					element->PhysDiskNum);
+		}
+		return;
+	}
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			if (!foreign_config)
+				_scsih_sas_volume_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			if (!foreign_config)
+				_scsih_sas_volume_delete(ioc,
+				    le16_to_cpu(element->VolDevHandle));
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			_scsih_sas_pd_hide(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			_scsih_sas_pd_expose(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			_scsih_sas_pd_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			_scsih_sas_pd_delete(ioc, element);
+			break;
+		}
+	}
+}
+
+/**
+ * _scsih_sas_ir_volume_event - IR volume event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u64 wwid;
+	unsigned long flags;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u32 state;
+	int rc;
+	Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->VolDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		ioc->name, __func__,  handle,
+	    le32_to_cpu(event_data->PreviousValue), state));
+	switch (state) {
+	case MPI2_RAID_VOL_STATE_MISSING:
+	case MPI2_RAID_VOL_STATE_FAILED:
+		_scsih_sas_volume_delete(ioc, handle);
+		break;
+
+	case MPI2_RAID_VOL_STATE_ONLINE:
+	case MPI2_RAID_VOL_STATE_DEGRADED:
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+		if (raid_device)
+			break;
+
+		mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+		if (!wwid) {
+			pr_err(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+		if (!raid_device) {
+			pr_err(MPT3SAS_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name,
+			    __FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device->id = ioc->sas_id++;
+		raid_device->channel = RAID_CHANNEL;
+		raid_device->handle = handle;
+		raid_device->wwid = wwid;
+		_scsih_raid_device_add(ioc, raid_device);
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+		break;
+
+	case MPI2_RAID_VOL_STATE_INITIALIZING:
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_ir_physical_disk_event - PD event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u16 handle, parent_handle;
+	u32 state;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
+	u64 sas_address;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+
+	dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+		ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
+	switch (state) {
+	case MPI2_RAID_PD_STATE_ONLINE:
+	case MPI2_RAID_PD_STATE_DEGRADED:
+	case MPI2_RAID_PD_STATE_REBUILDING:
+	case MPI2_RAID_PD_STATE_OPTIMAL:
+	case MPI2_RAID_PD_STATE_HOT_SPARE:
+
+		set_bit(handle, ioc->pd_handles);
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+		if (sas_device)
+			return;
+
+		if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+		_scsih_add_device(ioc, handle, 0, 1);
+
+		break;
+
+	case MPI2_RAID_PD_STATE_OFFLINE:
+	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
+	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
+	default:
+		break;
+	}
+}
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+/**
+ * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrOperationStatus_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->RAIDOperation) {
+	case MPI2_EVENT_IR_RAIDOP_RESYNC:
+		reason_str = "resync";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
+		reason_str = "online capacity expansion";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
+		reason_str = "consistency check";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
+		reason_str = "background init";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
+		reason_str = "make data consistent";
+		break;
+	}
+
+	if (!reason_str)
+		return;
+
+	pr_info(MPT3SAS_FMT "raid operational status: (%s)" \
+	    "\thandle(0x%04x), percent complete(%d)\n",
+	    ioc->name, reason_str,
+	    le16_to_cpu(event_data->VolDevHandle),
+	    event_data->PercentComplete);
+}
+#endif
+
+/**
+ * _scsih_sas_ir_operation_status_event - handle RAID operation events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data;
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	u16 handle;
+
+#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_ir_operation_status_event_debug(ioc,
+		     event_data);
+#endif
+
+	/* code added for raid transport support */
+	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		handle = le16_to_cpu(event_data->VolDevHandle);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->percent_complete =
+			    event_data->PercentComplete;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_prep_device_scan - initialize parameters prior to device scan
+ * @ioc: per adapter object
+ *
+ * Set the deleted flag prior to device scan.  If the device is found during
+ * the scan, then we clear the deleted flag.
+ */
+static void
+_scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (sas_device_priv_data && sas_device_priv_data->sas_target)
+			sas_device_priv_data->sas_target->deleted = 1;
+	}
+}
+
+/**
+ * _scsih_mark_responding_sas_device - mark a sas_devices as responding
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @slot: enclosure slot id
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_sas_devices.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u16 slot, u16 handle)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (sas_device->sas_address == sas_address &&
+		    sas_device->slot == slot) {
+			sas_device->responding = 1;
+			starget = sas_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->tm_busy = 0;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			if (starget)
+				starget_printk(KERN_INFO, starget,
+				    "handle(0x%04x), sas_addr(0x%016llx), "
+				    "enclosure logical id(0x%016llx), "
+				    "slot(%d)\n", handle,
+				    (unsigned long long)sas_device->sas_address,
+				    (unsigned long long)
+				    sas_device->enclosure_logical_id,
+				    sas_device->slot);
+			if (sas_device->handle == handle)
+				goto out;
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    sas_device->handle);
+			sas_device->handle = handle;
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle = handle;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_sas_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u32 device_info;
+
+	pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name);
+
+	if (list_empty(&ioc->sas_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+		if (!(_scsih_is_end_device(device_info)))
+			continue;
+		_scsih_mark_responding_sas_device(ioc,
+		    le64_to_cpu(sas_device_pg0.SASAddress),
+		    le16_to_cpu(sas_device_pg0.Slot), handle);
+	}
+
+ out:
+	pr_info(MPT3SAS_FMT "search for end-devices: complete\n",
+	    ioc->name);
+}
+
+/**
+ * _scsih_mark_responding_raid_device - mark a raid_device as responding
+ * @ioc: per adapter object
+ * @wwid: world wide identifier for raid volume
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_raid_devices.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+	u16 handle)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid == wwid && raid_device->starget) {
+			starget = raid_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			raid_device->responding = 1;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			starget_printk(KERN_INFO, raid_device->starget,
+			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
+			    (unsigned long long)raid_device->wwid);
+			spin_lock_irqsave(&ioc->raid_device_lock, flags);
+			if (raid_device->handle == handle) {
+				spin_unlock_irqrestore(&ioc->raid_device_lock,
+				    flags);
+				return;
+			}
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    raid_device->handle);
+			raid_device->handle = handle;
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle = handle;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_raid_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u8 phys_disk_num;
+
+	if (!ioc->ir_firmware)
+		return;
+
+	pr_info(MPT3SAS_FMT "search for raid volumes: start\n",
+	    ioc->name);
+
+	if (list_empty(&ioc->raid_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
+			_scsih_mark_responding_raid_device(ioc,
+			    le64_to_cpu(volume_pg1.WWID), handle);
+	}
+
+	/* refresh the pd_handles */
+		phys_disk_num = 0xFF;
+		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
+		while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+		    phys_disk_num))) {
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			    MPI2_IOCSTATUS_MASK;
+			if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+				break;
+			phys_disk_num = pd_pg0.PhysDiskNum;
+			handle = le16_to_cpu(pd_pg0.DevHandle);
+			set_bit(handle, ioc->pd_handles);
+		}
+ out:
+	pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
+		ioc->name);
+}
+
+/**
+ * _scsih_mark_responding_expander - mark a expander as responding
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @handle:
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_expanders.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u16 handle)
+{
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		sas_expander->responding = 1;
+		if (sas_expander->handle == handle)
+			goto out;
+		pr_info("\texpander(0x%016llx): handle changed" \
+		    " from(0x%04x) to (0x%04x)!!!\n",
+		    (unsigned long long)sas_expander->sas_address,
+		    sas_expander->handle, handle);
+		sas_expander->handle = handle;
+		for (i = 0 ; i < sas_expander->num_phys ; i++)
+			sas_expander->phy[i].handle = handle;
+		goto out;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_expanders -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u64 sas_address;
+	u16 handle;
+
+	pr_info(MPT3SAS_FMT "search for expanders: start\n", ioc->name);
+
+	if (list_empty(&ioc->sas_expander_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		sas_address = le64_to_cpu(expander_pg0.SASAddress);
+		pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n",
+			handle,
+		    (unsigned long long)sas_address);
+		_scsih_mark_responding_expander(ioc, sas_address, handle);
+	}
+
+ out:
+	pr_info(MPT3SAS_FMT "search for expanders: complete\n", ioc->name);
+}
+
+/**
+ * _scsih_remove_unresponding_sas_devices - removing unresponding devices
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device, *sas_device_next;
+	struct _sas_node *sas_expander, *sas_expander_next;
+	struct _raid_device *raid_device, *raid_device_next;
+	struct list_head tmp_list;
+	unsigned long flags;
+
+	pr_info(MPT3SAS_FMT "removing unresponding devices: start\n",
+	    ioc->name);
+
+	/* removing unresponding end devices */
+	pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n",
+	    ioc->name);
+	list_for_each_entry_safe(sas_device, sas_device_next,
+	    &ioc->sas_device_list, list) {
+		if (!sas_device->responding)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    sas_device->sas_address);
+		else
+			sas_device->responding = 0;
+	}
+
+	/* removing unresponding volumes */
+	if (ioc->ir_firmware) {
+		pr_info(MPT3SAS_FMT "removing unresponding devices: volumes\n",
+			ioc->name);
+		list_for_each_entry_safe(raid_device, raid_device_next,
+		    &ioc->raid_device_list, list) {
+			if (!raid_device->responding)
+				_scsih_sas_volume_delete(ioc,
+				    raid_device->handle);
+			else
+				raid_device->responding = 0;
+		}
+	}
+
+	/* removing unresponding expanders */
+	pr_info(MPT3SAS_FMT "removing unresponding devices: expanders\n",
+	    ioc->name);
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	INIT_LIST_HEAD(&tmp_list);
+	list_for_each_entry_safe(sas_expander, sas_expander_next,
+	    &ioc->sas_expander_list, list) {
+		if (!sas_expander->responding)
+			list_move_tail(&sas_expander->list, &tmp_list);
+		else
+			sas_expander->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
+	    list) {
+		list_del(&sas_expander->list);
+		_scsih_expander_node_remove(ioc, sas_expander);
+	}
+
+	pr_info(MPT3SAS_FMT "removing unresponding devices: complete\n",
+	    ioc->name);
+
+	/* unblock devices */
+	_scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander, u16 handle)
+{
+	Mpi2ExpanderPage1_t expander_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int i;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		mpt3sas_transport_update_links(ioc, sas_expander->sas_address,
+		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+		    expander_pg1.NegotiatedLinkRate >> 4);
+	}
+}
+
+/**
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2EventIrConfigElement_t element;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 phys_disk_num;
+	u16 ioc_status;
+	u16 handle, parent_handle;
+	u64 sas_address;
+	struct _sas_device *sas_device;
+	struct _sas_node *expander_device;
+	static struct _raid_device *raid_device;
+	u8 retry_count;
+	unsigned long flags;
+
+	pr_info(MPT3SAS_FMT "scan devices: start\n", ioc->name);
+
+	_scsih_sas_host_refresh(ioc);
+
+	pr_info(MPT3SAS_FMT "\tscan devices: expanders start\n", ioc->name);
+
+	/* expanders */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		expander_device = mpt3sas_scsih_expander_find_by_sas_address(
+		    ioc, le64_to_cpu(expander_pg0.SASAddress));
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (expander_device)
+			_scsih_refresh_expander_links(ioc, expander_device,
+			    handle);
+		else {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding expander: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(expander_pg0.SASAddress));
+			_scsih_expander_add(ioc, handle);
+			pr_info(MPT3SAS_FMT "\tAFTER adding expander: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(expander_pg0.SASAddress));
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: expanders complete\n",
+	    ioc->name);
+
+	if (!ioc->ir_firmware)
+		goto skip_to_sas;
+
+	pr_info(MPT3SAS_FMT "\tscan devices: phys disk start\n", ioc->name);
+
+	/* phys disk */
+	phys_disk_num = 0xFF;
+	while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+	    phys_disk_num))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		phys_disk_num = pd_pg0.PhysDiskNum;
+		handle = le16_to_cpu(pd_pg0.DevHandle);
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		if (sas_device)
+			continue;
+		if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle) != 0)
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from phys disk scan " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle,
+		    &sas_address)) {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding phys disk: " \
+			    " handle (0x%04x), sas_addr(0x%016llx)\n",
+			    ioc->name, handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, sas_device_pg0.PhyNum,
+			    MPI2_SAS_NEG_LINK_RATE_1_5);
+			set_bit(handle, ioc->pd_handles);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    1)) {
+				ssleep(1);
+			}
+			pr_info(MPT3SAS_FMT "\tAFTER adding phys disk: " \
+			    " handle (0x%04x), sas_addr(0x%016llx)\n",
+			    ioc->name, handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: phys disk complete\n",
+	    ioc->name);
+
+	pr_info(MPT3SAS_FMT "\tscan devices: volumes start\n", ioc->name);
+
+	/* volumes */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_wwid(ioc,
+		    le64_to_cpu(volume_pg1.WWID));
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (raid_device)
+			continue;
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+			element.VolDevHandle = volume_pg1.DevHandle;
+			pr_info(MPT3SAS_FMT
+				"\tBEFORE adding volume: handle (0x%04x)\n",
+				ioc->name, volume_pg1.DevHandle);
+			_scsih_sas_volume_add(ioc, &element);
+			pr_info(MPT3SAS_FMT
+				"\tAFTER adding volume: handle (0x%04x)\n",
+				ioc->name, volume_pg1.DevHandle);
+		}
+	}
+
+	pr_info(MPT3SAS_FMT "\tscan devices: volumes complete\n",
+	    ioc->name);
+
+ skip_to_sas:
+
+	pr_info(MPT3SAS_FMT "\tscan devices: end devices start\n",
+	    ioc->name);
+
+	/* sas devices */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
+			    " ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, ioc_status,
+			    le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		if (!(_scsih_is_end_device(
+		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
+			continue;
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+		    le64_to_cpu(sas_device_pg0.SASAddress));
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		if (sas_device)
+			continue;
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    0)) {
+				ssleep(1);
+			}
+			pr_info(MPT3SAS_FMT "\tAFTER adding end device: " \
+			    "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+			    handle, (unsigned long long)
+			    le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+	pr_info(MPT3SAS_FMT "\tscan devices: end devices complete\n",
+	    ioc->name);
+
+	pr_info(MPT3SAS_FMT "scan devices: complete\n", ioc->name);
+}
+/**
+ * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
+ * MPT3_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
+{
+	switch (reset_phase) {
+	case MPT3_IOC_PRE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
+		break;
+	case MPT3_IOC_AFTER_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
+		if (ioc->scsih_cmds.status & MPT3_CMD_PENDING) {
+			ioc->scsih_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
+			complete(&ioc->scsih_cmds.done);
+		}
+		if (ioc->tm_cmds.status & MPT3_CMD_PENDING) {
+			ioc->tm_cmds.status |= MPT3_CMD_RESET;
+			mpt3sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+			complete(&ioc->tm_cmds.done);
+		}
+
+		_scsih_fw_event_cleanup_queue(ioc);
+		_scsih_flush_running_cmds(ioc);
+		break;
+	case MPT3_IOC_DONE_RESET:
+		dtmprintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
+		if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
+		    !ioc->sas_hba.num_phys)) {
+			_scsih_prep_device_scan(ioc);
+			_scsih_search_responding_sas_devices(ioc);
+			_scsih_search_responding_raid_devices(ioc);
+			_scsih_search_responding_expanders(ioc);
+			_scsih_error_recovery_delete_devices(ioc);
+		}
+		break;
+	}
+}
+
+/**
+ * _mpt3sas_fw_work - delayed task for processing firmware events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	/* the queue is being flushed so ignore this event */
+	if (ioc->remove_host || fw_event->cancel_pending_work ||
+	    ioc->pci_error_recovery) {
+		_scsih_fw_event_free(ioc, fw_event);
+		return;
+	}
+
+	switch (fw_event->event) {
+	case MPT3SAS_PROCESS_TRIGGER_DIAG:
+		mpt3sas_process_trigger_data(ioc, fw_event->event_data);
+		break;
+	case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
+		while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery)
+			ssleep(1);
+		_scsih_remove_unresponding_sas_devices(ioc);
+		_scsih_scan_for_devices_after_reset(ioc);
+		break;
+	case MPT3SAS_PORT_ENABLE_COMPLETE:
+		ioc->start_scan = 0;
+	if (missing_delay[0] != -1 && missing_delay[1] != -1)
+			mpt3sas_base_update_missing_delay(ioc, missing_delay[0],
+			    missing_delay[1]);
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
+			"port enable: complete from worker thread\n",
+			ioc->name));
+		break;
+	case MPT3SAS_TURN_ON_FAULT_LED:
+		_scsih_turn_on_fault_led(ioc, fw_event->device_handle);
+		break;
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_sas_topology_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		_scsih_sas_device_status_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DISCOVERY:
+		_scsih_sas_discovery_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+		_scsih_sas_broadcast_primitive_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+		_scsih_sas_enclosure_dev_status_change_event(ioc,
+		    fw_event);
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_sas_ir_config_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_sas_ir_volume_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		_scsih_sas_ir_physical_disk_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+		_scsih_sas_ir_operation_status_event(ioc, fw_event);
+		break;
+	}
+	_scsih_fw_event_free(ioc, fw_event);
+}
+
+/**
+ * _firmware_event_work
+ * @ioc: per adapter object
+ * @work: The fw_event_work object
+ * Context: user.
+ *
+ * wrappers for the work thread handling firmware events
+ *
+ * Return nothing.
+ */
+
+static void
+_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event = container_of(work,
+	    struct fw_event_work, work);
+
+	_mpt3sas_fw_work(fw_event->ioc, fw_event);
+}
+
+/**
+ * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 event;
+	u16 sz;
+
+	/* events turned off due to host reset or driver unloading */
+	if (ioc->remove_host || ioc->pci_error_recovery)
+		return 1;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (unlikely(!mpi_reply)) {
+		pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	if (event != MPI2_EVENT_LOG_ENTRY_ADDED)
+		mpt3sas_trigger_event(ioc, event, 0);
+
+	switch (event) {
+	/* handle these */
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
+		    (Mpi2EventDataSasBroadcastPrimitive_t *)
+		    mpi_reply->EventData;
+
+		if (baen_data->Primitive !=
+		    MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 1;
+
+		if (ioc->broadcast_aen_busy) {
+			ioc->broadcast_aen_pending++;
+			return 1;
+		} else
+			ioc->broadcast_aen_busy = 1;
+		break;
+	}
+
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_check_topo_delete_events(ioc,
+		    (Mpi2EventDataSasTopologyChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_check_ir_config_unhide_events(ioc,
+		    (Mpi2EventDataIrConfigChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_check_volume_delete_events(ioc,
+		    (Mpi2EventDataIrVolume_t *)
+		    mpi_reply->EventData);
+		break;
+
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+	case MPI2_EVENT_SAS_DISCOVERY:
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		break;
+
+	default: /* ignore the rest */
+		return 1;
+	}
+
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return 1;
+	}
+	sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
+	fw_event->event_data = kzalloc(sz, GFP_ATOMIC);
+	if (!fw_event->event_data) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		kfree(fw_event);
+		return 1;
+	}
+
+	memcpy(fw_event->event_data, mpi_reply->EventData, sz);
+	fw_event->ioc = ioc;
+	fw_event->VF_ID = mpi_reply->VF_ID;
+	fw_event->VP_ID = mpi_reply->VP_ID;
+	fw_event->event = event;
+	_scsih_fw_event_add(ioc, fw_event);
+	return 1;
+}
+
+/* shost template */
+static struct scsi_host_template scsih_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT3SAS_DRIVER_NAME,
+	.queuecommand			= _scsih_qcmd,
+	.target_alloc			= _scsih_target_alloc,
+	.slave_alloc			= _scsih_slave_alloc,
+	.slave_configure		= _scsih_slave_configure,
+	.target_destroy			= _scsih_target_destroy,
+	.slave_destroy			= _scsih_slave_destroy,
+	.scan_finished			= _scsih_scan_finished,
+	.scan_start			= _scsih_scan_start,
+	.change_queue_depth		= _scsih_change_queue_depth,
+	.change_queue_type		= _scsih_change_queue_type,
+	.eh_abort_handler		= _scsih_abort,
+	.eh_device_reset_handler	= _scsih_dev_reset,
+	.eh_target_reset_handler	= _scsih_target_reset,
+	.eh_host_reset_handler		= _scsih_host_reset,
+	.bios_param			= _scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT3SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.use_clustering			= ENABLE_CLUSTERING,
+	.shost_attrs			= mpt3sas_host_attrs,
+	.sdev_attrs			= mpt3sas_dev_attrs,
+};
+
+/**
+ * _scsih_expander_node_remove - removing expander device from list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_expander_list.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port, *next;
+
+	/* remove sibling ports attached to this expander */
+	list_for_each_entry_safe(mpt3sas_port, next,
+	   &sas_expander->sas_port_list, port_list) {
+		if (ioc->shost_recovery)
+			return;
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+	}
+
+	mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+	    sas_expander->sas_address_parent);
+
+	pr_info(MPT3SAS_FMT
+		"expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n",
+		ioc->name,
+	    sas_expander->handle, (unsigned long long)
+	    sas_expander->sas_address);
+
+	kfree(sas_expander->phy);
+	kfree(sas_expander);
+}
+
+/**
+ * _scsih_ir_shutdown - IR shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
+ * the host system is shutting down.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+
+	/* is IR firmware build loaded ? */
+	if (!ioc->ir_firmware)
+		return;
+
+	/* are there any volumes ? */
+	if (list_empty(&ioc->raid_device_list))
+		return;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
+
+	pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
+	init_completion(&ioc->scsih_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		pr_info(MPT3SAS_FMT
+			"IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * _scsih_remove - detach and remove add host
+ * @pdev: PCI device struct
+ *
+ * Routine called when unloading the driver.
+ * Return nothing.
+ */
+static void __devexit
+_scsih_remove(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct _sas_port *mpt3sas_port, *next_port;
+	struct _raid_device *raid_device, *next;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+
+	ioc->remove_host = 1;
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+
+	/* release all the volumes */
+	_scsih_ir_shutdown(ioc);
+	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+	    list) {
+		if (raid_device->starget) {
+			sas_target_priv_data =
+			    raid_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			scsi_remove_target(&raid_device->starget->dev);
+		}
+		pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
+			ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		_scsih_raid_device_remove(ioc, raid_device);
+	}
+
+	/* free ports attached to the sas_host */
+	list_for_each_entry_safe(mpt3sas_port, next_port,
+	   &ioc->sas_hba.sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address);
+	}
+
+	/* free phys attached to the sas_host */
+	if (ioc->sas_hba.num_phys) {
+		kfree(ioc->sas_hba.phy);
+		ioc->sas_hba.phy = NULL;
+		ioc->sas_hba.num_phys = 0;
+	}
+
+	sas_remove_host(shost);
+	mpt3sas_base_detach(ioc);
+	list_del(&ioc->list);
+	scsi_remove_host(shost);
+	scsi_host_put(shost);
+}
+
+/**
+ * _scsih_shutdown - routine call during system shutdown
+ * @pdev: PCI device struct
+ *
+ * Return nothing.
+ */
+static void
+_scsih_shutdown(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+
+	ioc->remove_host = 1;
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+
+	_scsih_ir_shutdown(ioc);
+	mpt3sas_base_detach(ioc);
+}
+
+
+/**
+ * _scsih_probe_boot_devices - reports 1st device
+ * @ioc: per adapter object
+ *
+ * If specified in bios page 2, this routine reports the 1st
+ * device scsi-ml or sas transport for persistent boot device
+ * purposes.  Please refer to function _scsih_determine_boot_device()
+ */
+static void
+_scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u8 is_raid;
+	void *device;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u64 sas_address_parent;
+	u64 sas_address;
+	unsigned long flags;
+	int rc;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	device = NULL;
+	is_raid = 0;
+	if (ioc->req_boot_device.device) {
+		device =  ioc->req_boot_device.device;
+		is_raid = ioc->req_boot_device.is_raid;
+	} else if (ioc->req_alt_boot_device.device) {
+		device =  ioc->req_alt_boot_device.device;
+		is_raid = ioc->req_alt_boot_device.is_raid;
+	} else if (ioc->current_boot_device.device) {
+		device =  ioc->current_boot_device.device;
+		is_raid = ioc->current_boot_device.is_raid;
+	}
+
+	if (!device)
+		return;
+
+	if (is_raid) {
+		raid_device = device;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = device;
+		handle = sas_device->handle;
+		sas_address_parent = sas_device->sas_address_parent;
+		sas_address = sas_device->sas_address;
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+		if (!mpt3sas_transport_port_add(ioc, handle,
+		    sas_address_parent)) {
+			_scsih_sas_device_remove(ioc, sas_device);
+		} else if (!sas_device->starget) {
+			if (!ioc->is_driver_loading)
+				mpt3sas_transport_port_remove(ioc, sas_address,
+				    sas_address_parent);
+			_scsih_sas_device_remove(ioc, sas_device);
+		}
+	}
+}
+
+/**
+ * _scsih_probe_raid - reporting raid volumes to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _raid_device *raid_device, *raid_next;
+	int rc;
+
+	list_for_each_entry_safe(raid_device, raid_next,
+	    &ioc->raid_device_list, list) {
+		if (raid_device->starget)
+			continue;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	}
+}
+
+/**
+ * _scsih_probe_sas - reporting sas devices to sas transport
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device, *next;
+	unsigned long flags;
+
+	/* SAS Device List */
+	list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
+	    list) {
+
+		if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+		    sas_device->sas_address_parent)) {
+			list_del(&sas_device->list);
+			kfree(sas_device);
+			continue;
+		} else if (!sas_device->starget) {
+			/*
+			 * When asyn scanning is enabled, its not possible to
+			 * remove devices while scanning is turned on due to an
+			 * oops in scsi_sysfs_add_sdev()->add_device()->
+			 * sysfs_addrm_start()
+			 */
+			if (!ioc->is_driver_loading)
+				mpt3sas_transport_port_remove(ioc,
+				    sas_device->sas_address,
+				    sas_device->sas_address_parent);
+			list_del(&sas_device->list);
+			kfree(sas_device);
+			continue;
+		}
+
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_probe_devices - probing for devices
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 volume_mapping_flags;
+
+	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
+		return;  /* return when IOC doesn't support initiator mode */
+
+	_scsih_probe_boot_devices(ioc);
+
+	if (ioc->ir_firmware) {
+		volume_mapping_flags =
+		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+		if (volume_mapping_flags ==
+		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
+			_scsih_probe_raid(ioc);
+			_scsih_probe_sas(ioc);
+		} else {
+			_scsih_probe_sas(ioc);
+			_scsih_probe_raid(ioc);
+		}
+	} else
+		_scsih_probe_sas(ioc);
+}
+
+/**
+ * _scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus.  In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+_scsih_scan_start(struct Scsi_Host *shost)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+		mpt3sas_enable_diag_buffer(ioc, diag_buffer_enable);
+
+	if (disable_discovery > 0)
+		return;
+
+	ioc->start_scan = 1;
+	rc = mpt3sas_port_enable(ioc);
+
+	if (rc != 0)
+		pr_info(MPT3SAS_FMT "port enable: FAILED\n", ioc->name);
+}
+
+/**
+ * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodicallyn until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if (disable_discovery > 0) {
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		return 1;
+	}
+
+	if (time >= (300 * HZ)) {
+		ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+		pr_info(MPT3SAS_FMT
+			"port enable: FAILED with timeout (timeout=300s)\n",
+			ioc->name);
+		ioc->is_driver_loading = 0;
+		return 1;
+	}
+
+	if (ioc->start_scan)
+		return 0;
+
+	if (ioc->start_scan_failed) {
+		pr_info(MPT3SAS_FMT
+			"port enable: FAILED with (ioc_status=0x%08x)\n",
+			ioc->name, ioc->start_scan_failed);
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		ioc->remove_host = 1;
+		return 1;
+	}
+
+	pr_info(MPT3SAS_FMT "port enable: SUCCESS\n", ioc->name);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+	if (ioc->wait_for_discovery_to_complete) {
+		ioc->wait_for_discovery_to_complete = 0;
+		_scsih_probe_devices(ioc);
+	}
+	mpt3sas_base_start_watchdog(ioc);
+	ioc->is_driver_loading = 0;
+	return 1;
+}
+
+/**
+ * _scsih_probe - attach and add scsi host
+ * @pdev: PCI device struct
+ * @id: pci device id
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	struct Scsi_Host *shost;
+
+	shost = scsi_host_alloc(&scsih_driver_template,
+	    sizeof(struct MPT3SAS_ADAPTER));
+	if (!shost)
+		return -ENODEV;
+
+	/* init local params */
+	ioc = shost_priv(shost);
+	memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+	INIT_LIST_HEAD(&ioc->list);
+	list_add_tail(&ioc->list, &mpt3sas_ioc_list);
+	ioc->shost = shost;
+	ioc->id = mpt_ids++;
+	sprintf(ioc->name, "%s%d", MPT3SAS_DRIVER_NAME, ioc->id);
+	ioc->pdev = pdev;
+	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
+	ioc->tm_cb_idx = tm_cb_idx;
+	ioc->ctl_cb_idx = ctl_cb_idx;
+	ioc->base_cb_idx = base_cb_idx;
+	ioc->port_enable_cb_idx = port_enable_cb_idx;
+	ioc->transport_cb_idx = transport_cb_idx;
+	ioc->scsih_cb_idx = scsih_cb_idx;
+	ioc->config_cb_idx = config_cb_idx;
+	ioc->tm_tr_cb_idx = tm_tr_cb_idx;
+	ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
+	ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
+	ioc->logging_level = logging_level;
+	ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
+	/* misc semaphores and spin locks */
+	mutex_init(&ioc->reset_in_progress_mutex);
+	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
+	spin_lock_init(&ioc->scsi_lookup_lock);
+	spin_lock_init(&ioc->sas_device_lock);
+	spin_lock_init(&ioc->sas_node_lock);
+	spin_lock_init(&ioc->fw_event_lock);
+	spin_lock_init(&ioc->raid_device_lock);
+	spin_lock_init(&ioc->diag_trigger_lock);
+
+	INIT_LIST_HEAD(&ioc->sas_device_list);
+	INIT_LIST_HEAD(&ioc->sas_device_init_list);
+	INIT_LIST_HEAD(&ioc->sas_expander_list);
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	INIT_LIST_HEAD(&ioc->raid_device_list);
+	INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
+
+	/* init shost parameters */
+	shost->max_cmd_len = 32;
+	shost->max_lun = max_lun;
+	shost->transportt = mpt3sas_transport_template;
+	shost->unique_id = ioc->id;
+
+	if (max_sectors != 0xFFFF) {
+		if (max_sectors < 64) {
+			shost->max_sectors = 64;
+			pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+			    "for max_sectors, range is 64 to 32767. Assigning "
+			    "value of 64.\n", ioc->name, max_sectors);
+		} else if (max_sectors > 32767) {
+			shost->max_sectors = 32767;
+			pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
+			    "for max_sectors, range is 64 to 32767. Assigning "
+			    "default value of 32767.\n", ioc->name,
+			    max_sectors);
+		} else {
+			shost->max_sectors = max_sectors & 0xFFFE;
+			pr_info(MPT3SAS_FMT
+				"The max_sectors value is set to %d\n",
+				ioc->name, shost->max_sectors);
+		}
+	}
+
+	if ((scsi_add_host(shost, &pdev->dev))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		list_del(&ioc->list);
+		goto out_add_shost_fail;
+	}
+
+	/* register EEDP capabilities with SCSI layer */
+	if (prot_mask > 0)
+		scsi_host_set_prot(shost, prot_mask);
+	else
+		scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+				   | SHOST_DIF_TYPE2_PROTECTION
+				   | SHOST_DIF_TYPE3_PROTECTION);
+
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
+	/* event thread */
+	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
+	    "fw_event%d", ioc->id);
+	ioc->firmware_event_thread = create_singlethread_workqueue(
+	    ioc->firmware_event_name);
+	if (!ioc->firmware_event_thread) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_thread_fail;
+	}
+
+	ioc->is_driver_loading = 1;
+	if ((mpt3sas_base_attach(ioc))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_attach_fail;
+	}
+	scsi_scan_host(shost);
+	return 0;
+
+ out_attach_fail:
+	destroy_workqueue(ioc->firmware_event_thread);
+ out_thread_fail:
+	list_del(&ioc->list);
+	scsi_remove_host(shost);
+ out_add_shost_fail:
+	scsi_host_put(shost);
+	return -ENODEV;
+}
+
+#ifdef CONFIG_PM
+/**
+ * _scsih_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	pci_power_t device_state;
+
+	mpt3sas_base_stop_watchdog(ioc);
+	flush_scheduled_work();
+	scsi_block_requests(shost);
+	device_state = pci_choose_state(pdev, state);
+	pr_info(MPT3SAS_FMT
+		"pdev=0x%p, slot=%s, entering operating state [D%d]\n",
+		ioc->name, pdev, pci_name(pdev), device_state);
+
+	pci_save_state(pdev);
+	mpt3sas_base_free_resources(ioc);
+	pci_set_power_state(pdev, device_state);
+	return 0;
+}
+
+/**
+ * _scsih_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+_scsih_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	pci_power_t device_state = pdev->current_state;
+	int r;
+
+	pr_info(MPT3SAS_FMT
+		"pdev=0x%p, slot=%s, previous operating state [D%d]\n",
+		ioc->name, pdev, pci_name(pdev), device_state);
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	ioc->pdev = pdev;
+	r = mpt3sas_base_map_resources(ioc);
+	if (r)
+		return r;
+
+	mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
+	scsi_unblock_requests(shost);
+	mpt3sas_base_start_watchdog(ioc);
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * _scsih_pci_error_detected - Called when a PCI error is detected.
+ * @pdev: PCI device struct
+ * @state: PCI channel state
+ *
+ * Description: Called when a PCI error is detected.
+ *
+ * Return value:
+ *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
+ */
+static pci_ers_result_t
+_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: detected callback, state(%d)!!\n",
+	    ioc->name, state);
+
+	switch (state) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		/* Fatal error, prepare for slot reset */
+		ioc->pci_error_recovery = 1;
+		scsi_block_requests(ioc->shost);
+		mpt3sas_base_stop_watchdog(ioc);
+		mpt3sas_base_free_resources(ioc);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		/* Permanent error, prepare for device removal */
+		ioc->pci_error_recovery = 1;
+		mpt3sas_base_stop_watchdog(ioc);
+		_scsih_flush_running_cmds(ioc);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * _scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * @pdev: PCI device struct
+ *
+ * Description: This routine is called by the pci error recovery
+ * code after the PCI slot has been reset, just before we
+ * should resume normal operations.
+ */
+static pci_ers_result_t
+_scsih_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+
+	pr_info(MPT3SAS_FMT "PCI error: slot reset callback!!\n",
+	     ioc->name);
+
+	ioc->pci_error_recovery = 0;
+	ioc->pdev = pdev;
+	pci_restore_state(pdev);
+	rc = mpt3sas_base_map_resources(ioc);
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+	    FORCE_BIG_HAMMER);
+
+	pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name,
+	    (rc == 0) ? "success" : "failed");
+
+	if (!rc)
+		return PCI_ERS_RESULT_RECOVERED;
+	else
+		return PCI_ERS_RESULT_DISCONNECT;
+}
+
+/**
+ * _scsih_pci_resume() - resume normal ops after PCI reset
+ * @pdev: pointer to PCI device
+ *
+ * Called when the error recovery driver tells us that its
+ * OK to resume normal operation. Use completion to allow
+ * halted scsi ops to resume.
+ */
+static void
+_scsih_pci_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: resume callback!!\n", ioc->name);
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+	mpt3sas_base_start_watchdog(ioc);
+	scsi_unblock_requests(ioc->shost);
+}
+
+/**
+ * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * @pdev: pointer to PCI device
+ */
+static pci_ers_result_t
+_scsih_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	pr_info(MPT3SAS_FMT "PCI error: mmio enabled callback!!\n",
+	    ioc->name);
+
+	/* TODO - dump whatever for debugging purposes */
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/* raid transport support */
+static struct raid_function_template mpt3sas_raid_functions = {
+	.cookie		= &scsih_driver_template,
+	.is_raid	= _scsih_is_raid,
+	.get_resync	= _scsih_get_resync,
+	.get_state	= _scsih_get_state,
+};
+
+static struct pci_error_handlers _scsih_err_handler = {
+	.error_detected = _scsih_pci_error_detected,
+	.mmio_enabled = _scsih_pci_mmio_enabled,
+	.slot_reset =	_scsih_pci_slot_reset,
+	.resume =	_scsih_pci_resume,
+};
+
+static struct pci_driver scsih_driver = {
+	.name		= MPT3SAS_DRIVER_NAME,
+	.id_table	= scsih_pci_table,
+	.probe		= _scsih_probe,
+	.remove		= __devexit_p(_scsih_remove),
+	.shutdown	= _scsih_shutdown,
+	.err_handler	= &_scsih_err_handler,
+#ifdef CONFIG_PM
+	.suspend	= _scsih_suspend,
+	.resume		= _scsih_resume,
+#endif
+};
+
+
+/**
+ * _scsih_init - main entry point for this driver.
+ *
+ * Returns 0 success, anything else error.
+ */
+static int __init
+_scsih_init(void)
+{
+	int error;
+
+	mpt_ids = 0;
+
+	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
+	    MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_transport_template =
+	    sas_attach_transport(&mpt3sas_transport_functions);
+	if (!mpt3sas_transport_template)
+		return -ENODEV;
+
+/* raid transport support */
+	mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions);
+	if (!mpt3sas_raid_template) {
+		sas_release_transport(mpt3sas_transport_template);
+		return -ENODEV;
+	}
+
+	mpt3sas_base_initialize_callback_handler();
+
+	 /* queuecommand callback hander */
+	scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
+
+	/* task managment callback handler */
+	tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done);
+
+	/* base internal commands callback handler */
+	base_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_base_done);
+	port_enable_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_port_enable_done);
+
+	/* transport internal commands callback handler */
+	transport_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_transport_done);
+
+	/* scsih internal commands callback handler */
+	scsih_cb_idx = mpt3sas_base_register_callback_handler(_scsih_done);
+
+	/* configuration page API internal commands callback handler */
+	config_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_config_done);
+
+	/* ctl module callback handler */
+	ctl_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_ctl_done);
+
+	tm_tr_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_tr_complete);
+
+	tm_tr_volume_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_volume_tr_complete);
+
+	tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_sas_control_complete);
+
+	mpt3sas_ctl_init();
+
+	error = pci_register_driver(&scsih_driver);
+	if (error) {
+		/* raid transport support */
+		raid_class_release(mpt3sas_raid_template);
+		sas_release_transport(mpt3sas_transport_template);
+	}
+
+	return error;
+}
+
+/**
+ * _scsih_exit - exit point for this driver (when it is a module).
+ *
+ * Returns 0 success, anything else error.
+ */
+static void __exit
+_scsih_exit(void)
+{
+	pr_info("mpt3sas version %s unloading\n",
+	    MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_ctl_exit();
+
+	pci_unregister_driver(&scsih_driver);
+
+
+	mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_cb_idx);
+	mpt3sas_base_release_callback_handler(base_cb_idx);
+	mpt3sas_base_release_callback_handler(port_enable_cb_idx);
+	mpt3sas_base_release_callback_handler(transport_cb_idx);
+	mpt3sas_base_release_callback_handler(scsih_cb_idx);
+	mpt3sas_base_release_callback_handler(config_cb_idx);
+	mpt3sas_base_release_callback_handler(ctl_cb_idx);
+
+	mpt3sas_base_release_callback_handler(tm_tr_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
+
+/* raid transport support */
+	raid_class_release(mpt3sas_raid_template);
+	sas_release_transport(mpt3sas_transport_template);
+}
+
+module_init(_scsih_init);
+module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
new file mode 100644
index 0000000..87ca2b7
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -0,0 +1,2128 @@
+/*
+ * SAS Transport Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _transport_sas_node_find_by_sas_address - sas node search
+ * @ioc: per adapter object
+ * @sas_address: sas address of expander or sas host
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * Search for either hba phys or expander device based on handle, then returns
+ * the sas_node object.
+ */
+static struct _sas_node *
+_transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address)
+{
+	if (ioc->sas_hba.sas_address == sas_address)
+		return &ioc->sas_hba;
+	else
+		return mpt3sas_scsih_expander_find_by_sas_address(ioc,
+		    sas_address);
+}
+
+/**
+ * _transport_convert_phy_link_rate -
+ * @link_rate: link rate returned from mpt firmware
+ *
+ * Convert link_rate from mpi fusion into sas_transport form.
+ */
+static enum sas_linkrate
+_transport_convert_phy_link_rate(u8 link_rate)
+{
+	enum sas_linkrate rc;
+
+	switch (link_rate) {
+	case MPI2_SAS_NEG_LINK_RATE_1_5:
+		rc = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_3_0:
+		rc = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_6_0:
+		rc = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	case MPI25_SAS_NEG_LINK_RATE_12_0:
+		rc = SAS_LINK_RATE_12_0_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED:
+		rc = SAS_PHY_DISABLED;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
+		rc = SAS_LINK_RATE_FAILED;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR:
+		rc = SAS_SATA_PORT_SELECTOR;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
+		rc = SAS_PHY_RESET_IN_PROGRESS;
+		break;
+
+	default:
+	case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
+	case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
+		rc = SAS_LINK_RATE_UNKNOWN;
+		break;
+	}
+	return rc;
+}
+
+/**
+ * _transport_set_identify - set identify for phys and end devices
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @identify: sas identify info
+ *
+ * Populates sas identify info.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	struct sas_identify *identify)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 device_info;
+	u32 ioc_status;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT
+			"handle(0x%04x), ioc_status(0x%04x)\nfailure at %s:%d/%s()!\n",
+			ioc->name, handle, ioc_status,
+		     __FILE__, __LINE__, __func__);
+		return -EIO;
+	}
+
+	memset(identify, 0, sizeof(struct sas_identify));
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+
+	/* sas_address */
+	identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+	/* phy number of the parent device this device is linked to */
+	identify->phy_identifier = sas_device_pg0.PhyNum;
+
+	/* device_type */
+	switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
+	case MPI2_SAS_DEVICE_INFO_NO_DEVICE:
+		identify->device_type = SAS_PHY_UNUSED;
+		break;
+	case MPI2_SAS_DEVICE_INFO_END_DEVICE:
+		identify->device_type = SAS_END_DEVICE;
+		break;
+	case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER:
+		identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
+		break;
+	case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER:
+		identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
+		break;
+	}
+
+	/* initiator_port_protocols */
+	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
+
+	/* target_port_protocols */
+	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_SSP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_STP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_SMP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+		identify->target_port_protocols |= SAS_PROTOCOL_SATA;
+
+	return 0;
+}
+
+/**
+ * mpt3sas_transport_done -  internal transport layer callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated transport cmds.
+ * The callback index passed is `ioc->transport_cb_idx`
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->transport_cmds.smid != smid)
+		return 1;
+	ioc->transport_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		memcpy(ioc->transport_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+		ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->transport_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->transport_cmds.done);
+	return 1;
+}
+
+/* report manufacture request structure */
+struct rep_manu_request {
+	u8 smp_frame_type;
+	u8 function;
+	u8 reserved;
+	u8 request_length;
+};
+
+/* report manufacture reply structure */
+struct rep_manu_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x01 */
+	u8 function_result;
+	u8 response_length;
+	u16 expander_change_count;
+	u8 reserved0[2];
+	u8 sas_format;
+	u8 reserved2[3];
+	u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
+	u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
+	u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
+	u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
+	u16 component_id;
+	u8 component_revision_id;
+	u8 reserved3;
+	u8 vendor_specific[8];
+};
+
+/**
+ * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * @ioc: per adapter object
+ * @sas_address: expander sas address
+ * @edev: the sas_expander_device object
+ *
+ * Fills in the sas_expander_device object when SMP port is created.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct sas_expander_device *edev)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct rep_manu_reply *manufacture_reply;
+	struct rep_manu_request *manufacture_request;
+	int rc;
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	void *psge;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	dma_addr_t data_in_dma;
+	size_t data_in_sz;
+	size_t data_out_sz;
+	u16 wait_state_count;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	data_out_sz = sizeof(struct rep_manu_request);
+	data_in_sz = sizeof(struct rep_manu_reply);
+	data_out = pci_alloc_consistent(ioc->pdev, data_out_sz + data_in_sz,
+	    &data_out_dma);
+
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	data_in_dma = data_out_dma + sizeof(struct rep_manu_request);
+
+	manufacture_request = data_out;
+	manufacture_request->smp_frame_type = 0x40;
+	manufacture_request->function = 1;
+	manufacture_request->reserved = 0;
+	manufacture_request->request_length = 0;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->SASAddress = cpu_to_le64(sas_address);
+	mpi_request->RequestDataLength = cpu_to_le16(data_out_sz);
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+	    data_in_sz);
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"report_manufacture - send to sas_addr(0x%016llx)\n",
+		ioc->name, (unsigned long long)sas_address));
+	init_completion(&ioc->transport_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
+	    10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"report_manufacture - complete\n", ioc->name));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+		u8 *tmp;
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "report_manufacture - reply data transfer size(%d)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct rep_manu_reply))
+			goto out;
+
+		manufacture_reply = data_out + sizeof(struct rep_manu_request);
+		strncpy(edev->vendor_id, manufacture_reply->vendor_id,
+		     SAS_EXPANDER_VENDOR_ID_LEN);
+		strncpy(edev->product_id, manufacture_reply->product_id,
+		     SAS_EXPANDER_PRODUCT_ID_LEN);
+		strncpy(edev->product_rev, manufacture_reply->product_rev,
+		     SAS_EXPANDER_PRODUCT_REV_LEN);
+		edev->level = manufacture_reply->sas_format & 1;
+		if (edev->level) {
+			strncpy(edev->component_vendor_id,
+			    manufacture_reply->component_vendor_id,
+			     SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+			tmp = (u8 *)&manufacture_reply->component_id;
+			edev->component_id = tmp[0] << 8 | tmp[1];
+			edev->component_revision_id =
+			    manufacture_reply->component_revision_id;
+		}
+	} else
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "report_manufacture - no reply\n", ioc->name));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		pci_free_consistent(ioc->pdev, data_out_sz + data_in_sz,
+		    data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+
+/**
+ * _transport_delete_port - helper function to removing a port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_delete_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_port *mpt3sas_port)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+	enum sas_device_type device_type =
+	    mpt3sas_port->remote_identify.device_type;
+
+	dev_printk(KERN_INFO, &mpt3sas_port->port->dev,
+	    "remove: sas_addr(0x%016llx)\n",
+	    (unsigned long long) sas_address);
+
+	ioc->logging_level |= MPT_DEBUG_TRANSPORT;
+	if (device_type == SAS_END_DEVICE)
+		mpt3sas_device_remove_by_sas_address(ioc, sas_address);
+	else if (device_type == SAS_EDGE_EXPANDER_DEVICE ||
+	    device_type == SAS_FANOUT_EXPANDER_DEVICE)
+		mpt3sas_expander_remove(ioc, sas_address);
+	ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
+}
+
+/**
+ * _transport_delete_phy - helper function to removing single phy from port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ * @mpt3sas_phy: mpt3sas per phy object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_delete_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+
+	dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+	    "remove: sas_addr(0x%016llx), phy(%d)\n",
+	    (unsigned long long) sas_address, mpt3sas_phy->phy_id);
+
+	list_del(&mpt3sas_phy->port_siblings);
+	mpt3sas_port->num_phys--;
+	sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+	mpt3sas_phy->phy_belongs_to_port = 0;
+}
+
+/**
+ * _transport_add_phy - helper function to adding single phy to port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ * @mpt3sas_phy: mpt3sas per phy object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port,
+	struct _sas_phy *mpt3sas_phy)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+
+	dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+	    "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long)
+	    sas_address, mpt3sas_phy->phy_id);
+
+	list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list);
+	mpt3sas_port->num_phys++;
+	sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+	mpt3sas_phy->phy_belongs_to_port = 1;
+}
+
+/**
+ * _transport_add_phy_to_an_existing_port - adding new phy to existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @sas_address: sas address of device/expander were phy needs to be added to
+ *
+ * Returns nothing.
+ */
+static void
+_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy,
+	u64 sas_address)
+{
+	struct _sas_port *mpt3sas_port;
+	struct _sas_phy *phy_srch;
+
+	if (mpt3sas_phy->phy_belongs_to_port == 1)
+		return;
+
+	list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list,
+	    port_list) {
+		if (mpt3sas_port->remote_identify.sas_address !=
+		    sas_address)
+			continue;
+		list_for_each_entry(phy_srch, &mpt3sas_port->phy_list,
+		    port_siblings) {
+			if (phy_srch == mpt3sas_phy)
+				return;
+		}
+		_transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy);
+			return;
+	}
+
+}
+
+/**
+ * _transport_del_phy_from_an_existing_port - delete phy from existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt3sas_phy: mpt3sas per phy object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy)
+{
+	struct _sas_port *mpt3sas_port, *next;
+	struct _sas_phy *phy_srch;
+
+	if (mpt3sas_phy->phy_belongs_to_port == 0)
+		return;
+
+	list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list,
+	    port_list) {
+		list_for_each_entry(phy_srch, &mpt3sas_port->phy_list,
+		    port_siblings) {
+			if (phy_srch != mpt3sas_phy)
+				continue;
+
+			if (mpt3sas_port->num_phys == 1)
+				_transport_delete_port(ioc, mpt3sas_port);
+			else
+				_transport_delete_phy(ioc, mpt3sas_port,
+				    mpt3sas_phy);
+			return;
+		}
+	}
+}
+
+/**
+ * _transport_sanity_check - sanity check when adding a new port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @sas_address: sas address of device being added
+ *
+ * See the explanation above from _transport_delete_duplicate_port
+ */
+static void
+_transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node,
+	u64 sas_address)
+{
+	int i;
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address != sas_address)
+			continue;
+		if (sas_node->phy[i].phy_belongs_to_port == 1)
+			_transport_del_phy_from_an_existing_port(ioc, sas_node,
+			    &sas_node->phy[i]);
+	}
+}
+
+/**
+ * mpt3sas_transport_port_add - insert port to the list
+ * @ioc: per adapter object
+ * @handle: handle of attached device
+ * @sas_address: sas address of parent expander or sas host
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new port object to the sas_node->sas_port_list.
+ *
+ * Returns mpt3sas_port.
+ */
+struct _sas_port *
+mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u64 sas_address)
+{
+	struct _sas_phy *mpt3sas_phy, *next;
+	struct _sas_port *mpt3sas_port;
+	unsigned long flags;
+	struct _sas_node *sas_node;
+	struct sas_rphy *rphy;
+	int i;
+	struct sas_port *port;
+
+	mpt3sas_port = kzalloc(sizeof(struct _sas_port),
+	    GFP_KERNEL);
+	if (!mpt3sas_port) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&mpt3sas_port->port_list);
+	INIT_LIST_HEAD(&mpt3sas_port->phy_list);
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (!sas_node) {
+		pr_err(MPT3SAS_FMT
+			"%s: Could not find parent sas_address(0x%016llx)!\n",
+			ioc->name, __func__, (unsigned long long)sas_address);
+		goto out_fail;
+	}
+
+	if ((_transport_set_identify(ioc, handle,
+	    &mpt3sas_port->remote_identify))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	_transport_sanity_check(ioc, sas_node,
+	    mpt3sas_port->remote_identify.sas_address);
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address !=
+		    mpt3sas_port->remote_identify.sas_address)
+			continue;
+		list_add_tail(&sas_node->phy[i].port_siblings,
+		    &mpt3sas_port->phy_list);
+		mpt3sas_port->num_phys++;
+	}
+
+	if (!mpt3sas_port->num_phys) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	port = sas_port_alloc_num(sas_node->parent_dev);
+	if ((sas_port_add(port))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list,
+	    port_siblings) {
+		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+			dev_printk(KERN_INFO, &port->dev,
+				"add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n",
+				handle, (unsigned long long)
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_phy->phy_id);
+		sas_port_add_phy(port, mpt3sas_phy->phy);
+		mpt3sas_phy->phy_belongs_to_port = 1;
+	}
+
+	mpt3sas_port->port = port;
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE)
+		rphy = sas_end_device_alloc(port);
+	else
+		rphy = sas_expander_alloc(port,
+		    mpt3sas_port->remote_identify.device_type);
+
+	rphy->identify = mpt3sas_port->remote_identify;
+	if ((sas_rphy_add(rphy))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+	}
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &rphy->dev,
+			"add: handle(0x%04x), sas_addr(0x%016llx)\n",
+			handle, (unsigned long long)
+		    mpt3sas_port->remote_identify.sas_address);
+	mpt3sas_port->rphy = rphy;
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* fill in report manufacture */
+	if (mpt3sas_port->remote_identify.device_type ==
+	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+	    mpt3sas_port->remote_identify.device_type ==
+	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
+		_transport_expander_report_manufacture(ioc,
+		    mpt3sas_port->remote_identify.sas_address,
+		    rphy_to_expander_device(rphy));
+	return mpt3sas_port;
+
+ out_fail:
+	list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list,
+	    port_siblings)
+		list_del(&mpt3sas_phy->port_siblings);
+	kfree(mpt3sas_port);
+	return NULL;
+}
+
+/**
+ * mpt3sas_transport_port_remove - remove port from the list
+ * @ioc: per adapter object
+ * @sas_address: sas address of attached device
+ * @sas_address_parent: sas address of parent expander or sas host
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_port_list.
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u64 sas_address_parent)
+{
+	int i;
+	unsigned long flags;
+	struct _sas_port *mpt3sas_port, *next;
+	struct _sas_node *sas_node;
+	u8 found = 0;
+	struct _sas_phy *mpt3sas_phy, *next_phy;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc,
+	    sas_address_parent);
+	if (!sas_node) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+	list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list,
+	    port_list) {
+		if (mpt3sas_port->remote_identify.sas_address != sas_address)
+			continue;
+		found = 1;
+		list_del(&mpt3sas_port->port_list);
+		goto out;
+	}
+ out:
+	if (!found) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address == sas_address)
+			memset(&sas_node->phy[i].remote_identify, 0 ,
+			    sizeof(struct sas_identify));
+	}
+
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	list_for_each_entry_safe(mpt3sas_phy, next_phy,
+	    &mpt3sas_port->phy_list, port_siblings) {
+		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+			dev_printk(KERN_INFO, &mpt3sas_port->port->dev,
+			    "remove: sas_addr(0x%016llx), phy(%d)\n",
+			    (unsigned long long)
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_phy->phy_id);
+		mpt3sas_phy->phy_belongs_to_port = 0;
+		sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+		list_del(&mpt3sas_phy->port_siblings);
+	}
+	sas_port_delete(mpt3sas_port->port);
+	kfree(mpt3sas_port);
+}
+
+/**
+ * mpt3sas_transport_add_host_phy - report sas_host phy to transport
+ * @ioc: per adapter object
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @phy_pg0: sas phy page 0
+ * @parent_dev: parent device class object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev)
+{
+	struct sas_phy *phy;
+	int phy_index = mpt3sas_phy->phy_id;
+
+
+	INIT_LIST_HEAD(&mpt3sas_phy->port_siblings);
+	phy = sas_phy_alloc(parent_dev, phy_index);
+	if (!phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if ((_transport_set_identify(ioc, mpt3sas_phy->handle,
+	    &mpt3sas_phy->identify))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	phy->identify = mpt3sas_phy->identify;
+	mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle);
+	if (mpt3sas_phy->attached_handle)
+		_transport_set_identify(ioc, mpt3sas_phy->attached_handle,
+		    &mpt3sas_phy->remote_identify);
+	phy->identify.phy_identifier = mpt3sas_phy->phy_id;
+	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
+	    phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
+	    phy_pg0.HwLinkRate >> 4);
+	phy->minimum_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.ProgrammedLinkRate >> 4);
+
+	if ((sas_phy_add(phy))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &phy->dev,
+		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    mpt3sas_phy->handle, (unsigned long long)
+		    mpt3sas_phy->identify.sas_address,
+		    mpt3sas_phy->attached_handle,
+		    (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+	mpt3sas_phy->phy = phy;
+	return 0;
+}
+
+
+/**
+ * mpt3sas_transport_add_expander_phy - report expander phy to transport
+ * @ioc: per adapter object
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @expander_pg1: expander page 1
+ * @parent_dev: parent device class object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
+	struct device *parent_dev)
+{
+	struct sas_phy *phy;
+	int phy_index = mpt3sas_phy->phy_id;
+
+	INIT_LIST_HEAD(&mpt3sas_phy->port_siblings);
+	phy = sas_phy_alloc(parent_dev, phy_index);
+	if (!phy) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if ((_transport_set_identify(ioc, mpt3sas_phy->handle,
+	    &mpt3sas_phy->identify))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	phy->identify = mpt3sas_phy->identify;
+	mpt3sas_phy->attached_handle =
+	    le16_to_cpu(expander_pg1.AttachedDevHandle);
+	if (mpt3sas_phy->attached_handle)
+		_transport_set_identify(ioc, mpt3sas_phy->attached_handle,
+		    &mpt3sas_phy->remote_identify);
+	phy->identify.phy_identifier = mpt3sas_phy->phy_id;
+	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.NegotiatedLinkRate &
+	    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
+	    expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
+	    expander_pg1.HwLinkRate >> 4);
+	phy->minimum_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.ProgrammedLinkRate >> 4);
+
+	if ((sas_phy_add(phy))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &phy->dev,
+		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    mpt3sas_phy->handle, (unsigned long long)
+		    mpt3sas_phy->identify.sas_address,
+		    mpt3sas_phy->attached_handle,
+		    (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+	mpt3sas_phy->phy = phy;
+	return 0;
+}
+
+/**
+ * mpt3sas_transport_update_links - refreshing phy link changes
+ * @ioc: per adapter object
+ * @sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
+ * @phy_numberv: phy number
+ * @link_rate: new link rate
+ *
+ * Returns nothing.
+ */
+void
+mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate)
+{
+	unsigned long flags;
+	struct _sas_node *sas_node;
+	struct _sas_phy *mpt3sas_phy;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
+	if (!sas_node) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+
+	mpt3sas_phy = &sas_node->phy[phy_number];
+	mpt3sas_phy->attached_handle = handle;
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) {
+		_transport_set_identify(ioc, handle,
+		    &mpt3sas_phy->remote_identify);
+		_transport_add_phy_to_an_existing_port(ioc, sas_node,
+		    mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address);
+	} else
+		memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct
+		    sas_identify));
+
+	if (mpt3sas_phy->phy)
+		mpt3sas_phy->phy->negotiated_linkrate =
+		    _transport_convert_phy_link_rate(link_rate);
+
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+		    "refresh: parent sas_addr(0x%016llx),\n"
+		    "\tlink_rate(0x%02x), phy(%d)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    (unsigned long long)sas_address,
+		    link_rate, phy_number, handle, (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+}
+
+static inline void *
+phy_to_ioc(struct sas_phy *phy)
+{
+	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+	return shost_priv(shost);
+}
+
+static inline void *
+rphy_to_ioc(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+	return shost_priv(shost);
+}
+
+/* report phy error log structure */
+struct phy_error_log_request {
+	u8 smp_frame_type; /* 0x40 */
+	u8 function; /* 0x11 */
+	u8 allocated_response_length;
+	u8 request_length; /* 02 */
+	u8 reserved_1[5];
+	u8 phy_identifier;
+	u8 reserved_2[2];
+};
+
+/* report phy error log reply structure */
+struct phy_error_log_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x11 */
+	u8 function_result;
+	u8 response_length;
+	__be16 expander_change_count;
+	u8 reserved_1[3];
+	u8 phy_identifier;
+	u8 reserved_2[2];
+	__be32 invalid_dword;
+	__be32 running_disparity_error;
+	__be32 loss_of_dword_sync;
+	__be32 phy_reset_problem;
+};
+
+/**
+ * _transport_get_expander_phy_error_log - return expander counters
+ * @ioc: per adapter object
+ * @phy: The sas phy object
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_phy *phy)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct phy_error_log_request *phy_error_log_request;
+	struct phy_error_log_reply *phy_error_log_reply;
+	int rc;
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	void *psge;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	u32 sz;
+	u16 wait_state_count;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	sz = sizeof(struct phy_error_log_request) +
+	    sizeof(struct phy_error_log_reply);
+	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	rc = -EINVAL;
+	memset(data_out, 0, sz);
+	phy_error_log_request = data_out;
+	phy_error_log_request->smp_frame_type = 0x40;
+	phy_error_log_request->function = 0x11;
+	phy_error_log_request->request_length = 2;
+	phy_error_log_request->allocated_response_length = 0;
+	phy_error_log_request->phy_identifier = phy->number;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->RequestDataLength =
+	    cpu_to_le16(sizeof(struct phy_error_log_request));
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, data_out_dma,
+		sizeof(struct phy_error_log_request),
+	    data_out_dma + sizeof(struct phy_error_log_request),
+	    sizeof(struct phy_error_log_reply));
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n",
+		ioc->name, (unsigned long long)phy->identify.sas_address,
+		phy->number));
+	init_completion(&ioc->transport_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
+	    10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"phy_error_log - complete\n", ioc->name));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_error_log - reply data transfer size(%d)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct phy_error_log_reply))
+			goto out;
+
+		phy_error_log_reply = data_out +
+		    sizeof(struct phy_error_log_request);
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_error_log - function_result(%d)\n",
+		    ioc->name, phy_error_log_reply->function_result));
+
+		phy->invalid_dword_count =
+		    be32_to_cpu(phy_error_log_reply->invalid_dword);
+		phy->running_disparity_error_count =
+		    be32_to_cpu(phy_error_log_reply->running_disparity_error);
+		phy->loss_of_dword_sync_count =
+		    be32_to_cpu(phy_error_log_reply->loss_of_dword_sync);
+		phy->phy_reset_problem_count =
+		    be32_to_cpu(phy_error_log_reply->phy_reset_problem);
+		rc = 0;
+	} else
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_error_log - no reply\n", ioc->name));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _transport_get_linkerrors - return phy counters for both hba and expanders
+ * @phy: The sas phy object
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_get_linkerrors(struct sas_phy *phy)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasPhyPage1_t phy_pg1;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_get_expander_phy_error_log(ioc, phy);
+
+	/* get hba phy error logs */
+	if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1,
+		    phy->number))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
+		pr_info(MPT3SAS_FMT
+			"phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n",
+			ioc->name, phy->number,
+			le16_to_cpu(mpi_reply.IOCStatus),
+		    le32_to_cpu(mpi_reply.IOCLogInfo));
+
+	phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount);
+	phy->running_disparity_error_count =
+	    le32_to_cpu(phy_pg1.RunningDisparityErrorCount);
+	phy->loss_of_dword_sync_count =
+	    le32_to_cpu(phy_pg1.LossDwordSynchCount);
+	phy->phy_reset_problem_count =
+	    le32_to_cpu(phy_pg1.PhyResetProblemCount);
+	return 0;
+}
+
+/**
+ * _transport_get_enclosure_identifier -
+ * @phy: The sas phy object
+ *
+ * Obtain the enclosure logical id for an expander.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+	struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    rphy->identify.sas_address);
+	if (sas_device) {
+		*identifier = sas_device->enclosure_logical_id;
+		rc = 0;
+	} else {
+		*identifier = 0;
+		rc = -ENXIO;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _transport_get_bay_identifier -
+ * @phy: The sas phy object
+ *
+ * Returns the slot id for a device that resides inside an enclosure.
+ */
+static int
+_transport_get_bay_identifier(struct sas_rphy *rphy)
+{
+	struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+	    rphy->identify.sas_address);
+	if (sas_device)
+		rc = sas_device->slot;
+	else
+		rc = -ENXIO;
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/* phy control request structure */
+struct phy_control_request {
+	u8 smp_frame_type; /* 0x40 */
+	u8 function; /* 0x91 */
+	u8 allocated_response_length;
+	u8 request_length; /* 0x09 */
+	u16 expander_change_count;
+	u8 reserved_1[3];
+	u8 phy_identifier;
+	u8 phy_operation;
+	u8 reserved_2[13];
+	u64 attached_device_name;
+	u8 programmed_min_physical_link_rate;
+	u8 programmed_max_physical_link_rate;
+	u8 reserved_3[6];
+};
+
+/* phy control reply structure */
+struct phy_control_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x11 */
+	u8 function_result;
+	u8 response_length;
+};
+
+#define SMP_PHY_CONTROL_LINK_RESET	(0x01)
+#define SMP_PHY_CONTROL_HARD_RESET	(0x02)
+#define SMP_PHY_CONTROL_DISABLE		(0x03)
+
+/**
+ * _transport_expander_phy_control - expander phy control
+ * @ioc: per adapter object
+ * @phy: The sas phy object
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_phy *phy, u8 phy_operation)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct phy_control_request *phy_control_request;
+	struct phy_control_reply *phy_control_reply;
+	int rc;
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	void *psge;
+	u32 sgl_flags;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	u32 sz;
+	u16 wait_state_count;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto out;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	sz = sizeof(struct phy_control_request) +
+	    sizeof(struct phy_control_reply);
+	data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	rc = -EINVAL;
+	memset(data_out, 0, sz);
+	phy_control_request = data_out;
+	phy_control_request->smp_frame_type = 0x40;
+	phy_control_request->function = 0x91;
+	phy_control_request->request_length = 9;
+	phy_control_request->allocated_response_length = 0;
+	phy_control_request->phy_identifier = phy->number;
+	phy_control_request->phy_operation = phy_operation;
+	phy_control_request->programmed_min_physical_link_rate =
+	    phy->minimum_linkrate << 4;
+	phy_control_request->programmed_max_physical_link_rate =
+	    phy->maximum_linkrate << 4;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->RequestDataLength =
+	    cpu_to_le16(sizeof(struct phy_error_log_request));
+	psge = &mpi_request->SGL;
+
+	/* WRITE sgel first */
+	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+	ioc->base_add_sg_single(psge, sgl_flags |
+	    sizeof(struct phy_control_request), data_out_dma);
+
+	/* incr sgel */
+	psge += ioc->sge_size;
+
+	/* READ sgel last */
+	sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+	    MPI2_SGE_FLAGS_END_OF_LIST);
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+	ioc->base_add_sg_single(psge, sgl_flags |
+	    sizeof(struct phy_control_reply), data_out_dma +
+	    sizeof(struct phy_control_request));
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n",
+		ioc->name, (unsigned long long)phy->identify.sas_address,
+		phy->number, phy_operation));
+	init_completion(&ioc->transport_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
+	    10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s: timeout\n",
+		    ioc->name, __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"phy_control - complete\n", ioc->name));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_control - reply data transfer size(%d)\n",
+		    ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct phy_control_reply))
+			goto out;
+
+		phy_control_reply = data_out +
+		    sizeof(struct phy_control_request);
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_control - function_result(%d)\n",
+		    ioc->name, phy_control_reply->function_result));
+
+		rc = 0;
+	} else
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "phy_control - no reply\n", ioc->name));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _transport_phy_reset -
+ * @phy: The sas phy object
+ * @hard_reset:
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIoUnitControlReply_t mpi_reply;
+	Mpi2SasIoUnitControlRequest_t mpi_request;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET :
+		    SMP_PHY_CONTROL_LINK_RESET);
+
+	/* handle hba phys */
+	memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t));
+	mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request.Operation = hard_reset ?
+	    MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
+	mpi_request.PhyNum = phy->number;
+
+	if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
+		pr_info(MPT3SAS_FMT
+		"phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
+		ioc->name, phy->number, le16_to_cpu(mpi_reply.IOCStatus),
+		    le32_to_cpu(mpi_reply.IOCLogInfo));
+
+	return 0;
+}
+
+/**
+ * _transport_phy_enable - enable/disable phys
+ * @phy: The sas phy object
+ * @enable: enable phy when true
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_enable(struct sas_phy *phy, int enable)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 sz;
+	int rc = 0;
+	unsigned long flags;
+	int i, discovery_active;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET :
+		    SMP_PHY_CONTROL_DISABLE);
+
+	/* handle hba phys */
+
+	/* read sas_iounit page 0 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	/* unable to enable/disable phys when when discovery is active */
+	for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) {
+		if (sas_iounit_pg0->PhyData[i].PortFlags &
+		    MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) {
+			pr_err(MPT3SAS_FMT "discovery is active on " \
+			    "port = %d, phy = %d: unable to enable/disable "
+			    "phys, try again later!\n", ioc->name,
+			    sas_iounit_pg0->PhyData[i].Port, i);
+			discovery_active = 1;
+		}
+	}
+
+	if (discovery_active) {
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	/* read sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	/* copy Port/PortFlags/PhyFlags from page 0 */
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		sas_iounit_pg1->PhyData[i].Port =
+		    sas_iounit_pg0->PhyData[i].Port;
+		sas_iounit_pg1->PhyData[i].PortFlags =
+		    (sas_iounit_pg0->PhyData[i].PortFlags &
+		    MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG);
+		sas_iounit_pg1->PhyData[i].PhyFlags =
+		    (sas_iounit_pg0->PhyData[i].PhyFlags &
+		    (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED +
+		    MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED));
+	}
+
+	if (enable)
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
+		    &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+	else
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
+		    |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+
+	mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
+
+	/* link reset */
+	if (enable)
+		_transport_phy_reset(phy, 0);
+
+ out:
+	kfree(sas_iounit_pg1);
+	kfree(sas_iounit_pg0);
+	return rc;
+}
+
+/**
+ * _transport_phy_speed - set phy min/max link rates
+ * @phy: The sas phy object
+ * @rates: rates defined in sas_phy_linkrates
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasPhyPage0_t phy_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 sz;
+	int i;
+	int rc = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (!rates->minimum_linkrate)
+		rates->minimum_linkrate = phy->minimum_linkrate;
+	else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
+		rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+	if (!rates->maximum_linkrate)
+		rates->maximum_linkrate = phy->maximum_linkrate;
+	else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
+		rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address) {
+		phy->minimum_linkrate = rates->minimum_linkrate;
+		phy->maximum_linkrate = rates->maximum_linkrate;
+		return _transport_expander_phy_control(ioc, phy,
+		    SMP_PHY_CONTROL_LINK_RESET);
+	}
+
+	/* handle hba phys */
+
+	/* sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+		if (phy->number != i) {
+			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+			    (ioc->sas_hba.phy[i].phy->minimum_linkrate +
+			    (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
+		} else {
+			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+			    (rates->minimum_linkrate +
+			    (rates->maximum_linkrate << 4));
+		}
+	}
+
+	if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+	    sz)) {
+		pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+
+	/* link reset */
+	_transport_phy_reset(phy, 0);
+
+	/* read phy page 0, then update the rates in the sas transport phy */
+	if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+	    phy->number)) {
+		phy->minimum_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+		phy->maximum_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.ProgrammedLinkRate >> 4);
+		phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.NegotiatedLinkRate &
+		    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	}
+
+ out:
+	kfree(sas_iounit_pg1);
+	return rc;
+}
+
+/**
+ * _transport_smp_handler - transport portal for smp passthru
+ * @shost: shost object
+ * @rphy: sas transport rphy object
+ * @req:
+ *
+ * This used primarily for smp_utils.
+ * Example:
+ *           smp_rep_general /sys/class/bsg/expander-5:0
+ */
+static int
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+	struct request *req)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	int rc, i;
+	u16 smid;
+	u32 ioc_state;
+	unsigned long timeleft;
+	void *psge;
+	u8 issue_reset = 0;
+	dma_addr_t dma_addr_in = 0;
+	dma_addr_t dma_addr_out = 0;
+	dma_addr_t pci_dma_in = 0;
+	dma_addr_t pci_dma_out = 0;
+	void *pci_addr_in = NULL;
+	void *pci_addr_out = NULL;
+	u16 wait_state_count;
+	struct request *rsp = req->next_rq;
+	struct bio_vec *bvec = NULL;
+
+	if (!rsp) {
+		pr_err(MPT3SAS_FMT "%s: the smp response space is missing\n",
+			ioc->name, __func__);
+		return -EINVAL;
+	}
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
+		    __func__, ioc->name);
+		return -EFAULT;
+	}
+
+	rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
+	if (rc)
+		return rc;
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", ioc->name,
+		    __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	/* Check if the request is split across multiple segments */
+	if (req->bio->bi_vcnt > 1) {
+		u32 offset = 0;
+
+		/* Allocate memory and copy the request */
+		pci_addr_out = pci_alloc_consistent(ioc->pdev,
+		    blk_rq_bytes(req), &pci_dma_out);
+		if (!pci_addr_out) {
+			pr_info(MPT3SAS_FMT "%s(): PCI Addr out = NULL\n",
+			    ioc->name, __func__);
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		bio_for_each_segment(bvec, req->bio, i) {
+			memcpy(pci_addr_out + offset,
+			    page_address(bvec->bv_page) + bvec->bv_offset,
+			    bvec->bv_len);
+			offset += bvec->bv_len;
+		}
+	} else {
+		dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
+		    blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
+		if (!dma_addr_out) {
+			pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n",
+			    ioc->name, __func__);
+			rc = -ENOMEM;
+			goto free_pci;
+		}
+	}
+
+	/* Check if the response needs to be populated across
+	 * multiple segments */
+	if (rsp->bio->bi_vcnt > 1) {
+		pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp),
+		    &pci_dma_in);
+		if (!pci_addr_in) {
+			pr_info(MPT3SAS_FMT "%s(): PCI Addr in = NULL\n",
+			    ioc->name, __func__);
+			rc = -ENOMEM;
+			goto unmap;
+		}
+	} else {
+		dma_addr_in =  pci_map_single(ioc->pdev, bio_data(rsp->bio),
+		    blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
+		if (!dma_addr_in) {
+			pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n",
+			    ioc->name, __func__);
+			rc = -ENOMEM;
+			goto unmap;
+		}
+	}
+
+	wait_state_count = 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (wait_state_count++ == 10) {
+			pr_err(MPT3SAS_FMT
+			    "%s: failed due to ioc not operational\n",
+			    ioc->name, __func__);
+			rc = -EFAULT;
+			goto unmap;
+		}
+		ssleep(1);
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		pr_info(MPT3SAS_FMT
+			"%s: waiting for operational state(count=%d)\n",
+			ioc->name, __func__, wait_state_count);
+	}
+	if (wait_state_count)
+		pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
+		    ioc->name, __func__);
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		rc = -EAGAIN;
+		goto unmap;
+	}
+
+	rc = 0;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = 0xFF;
+	mpi_request->SASAddress = (rphy) ?
+	    cpu_to_le64(rphy->identify.sas_address) :
+	    cpu_to_le64(ioc->sas_hba.sas_address);
+	mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
+	psge = &mpi_request->SGL;
+
+	if (req->bio->bi_vcnt > 1)
+		ioc->build_sg(ioc, psge, pci_dma_out, (blk_rq_bytes(req) - 4),
+		    pci_dma_in, (blk_rq_bytes(rsp) + 4));
+	else
+		ioc->build_sg(ioc, psge, dma_addr_out, (blk_rq_bytes(req) - 4),
+		    dma_addr_in, (blk_rq_bytes(rsp) + 4));
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s - sending smp request\n", ioc->name, __func__));
+
+	init_completion(&ioc->transport_cmds.done);
+	mpt3sas_base_put_smid_default(ioc, smid);
+	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
+	    10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		pr_err(MPT3SAS_FMT "%s : timeout\n",
+		    __func__, ioc->name);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		"%s - complete\n", ioc->name, __func__));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s - reply data transfer size(%d)\n",
+		    ioc->name, __func__,
+		    le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
+		req->sense_len = sizeof(*mpi_reply);
+		req->resid_len = 0;
+		rsp->resid_len -=
+		    le16_to_cpu(mpi_reply->ResponseDataLength);
+
+		/* check if the resp needs to be copied from the allocated
+		 * pci mem */
+		if (rsp->bio->bi_vcnt > 1) {
+			u32 offset = 0;
+			u32 bytes_to_copy =
+			    le16_to_cpu(mpi_reply->ResponseDataLength);
+			bio_for_each_segment(bvec, rsp->bio, i) {
+				if (bytes_to_copy <= bvec->bv_len) {
+					memcpy(page_address(bvec->bv_page) +
+					    bvec->bv_offset, pci_addr_in +
+					    offset, bytes_to_copy);
+					break;
+				} else {
+					memcpy(page_address(bvec->bv_page) +
+					    bvec->bv_offset, pci_addr_in +
+					    offset, bvec->bv_len);
+					bytes_to_copy -= bvec->bv_len;
+				}
+				offset += bvec->bv_len;
+			}
+		}
+	} else {
+		dtransportprintk(ioc, pr_info(MPT3SAS_FMT
+		    "%s - no reply\n", ioc->name, __func__));
+		rc = -ENXIO;
+	}
+
+ issue_host_reset:
+	if (issue_reset) {
+		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+		    FORCE_BIG_HAMMER);
+		rc = -ETIMEDOUT;
+	}
+
+ unmap:
+	if (dma_addr_out)
+		pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
+		    PCI_DMA_BIDIRECTIONAL);
+	if (dma_addr_in)
+		pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
+		    PCI_DMA_BIDIRECTIONAL);
+
+ free_pci:
+	if (pci_addr_out)
+		pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out,
+		    pci_dma_out);
+
+	if (pci_addr_in)
+		pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in,
+		    pci_dma_in);
+
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+struct sas_function_template mpt3sas_transport_functions = {
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.phy_enable		= _transport_phy_enable,
+	.set_phy_speed		= _transport_phy_speed,
+	.smp_handler		= _transport_smp_handler,
+};
+
+struct scsi_transport_template *mpt3sas_transport_template;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
new file mode 100644
index 0000000..da6c5f2
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
@@ -0,0 +1,434 @@
+/*
+ * This module provides common API to set Diagnostic trigger for MPT
+ * (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _mpt3sas_raise_sigio - notifiy app
+ * @ioc: per adapter object
+ * @event_data:
+ */
+static void
+_mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 sz, event_data_sz;
+	unsigned long flags;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
+	    ioc->name, __func__));
+
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4;
+	mpi_reply = kzalloc(sz, GFP_KERNEL);
+	if (!mpi_reply)
+		goto out;
+	mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED);
+	event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4;
+	mpi_reply->EventDataLength = cpu_to_le16(event_data_sz);
+	memcpy(&mpi_reply->EventData, event_data,
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: add to driver event log\n",
+		ioc->name, __func__));
+	mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
+	kfree(mpi_reply);
+ out:
+
+	/* clearing the diag_trigger_active flag */
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: clearing diag_trigger_active flag\n",
+		ioc->name, __func__));
+	ioc->diag_trigger_active = 0;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_process_trigger_data - process the event data for the trigger
+ * @ioc: per adapter object
+ * @event_data:
+ */
+void
+mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	u8 issue_reset = 0;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n",
+	    ioc->name, __func__));
+
+	/* release the diag buffer trace */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: release trace diag buffer\n", ioc->name, __func__));
+		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
+		    &issue_reset);
+	}
+
+	_mpt3sas_raise_sigio(ioc, event_data);
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_master - Master trigger handler
+ * @ioc: per adapter object
+ * @trigger_bitmask:
+ *
+ */
+void
+mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	unsigned long flags;
+	u8 found_match = 0;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+		goto by_pass_checks;
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+ by_pass_checks:
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - trigger_bitmask = 0x%08x\n",
+		ioc->name, __func__, trigger_bitmask));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	if (ioc->diag_trigger_master.MasterData & trigger_bitmask) {
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MASTER;
+	event_data.u.master.MasterData = trigger_bitmask;
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+		_mpt3sas_raise_sigio(ioc, &event_data);
+	else
+		mpt3sas_send_trigger_data_event(ioc, &event_data);
+
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_event - Event trigger handler
+ * @ioc: per adapter object
+ * @event:
+ * @log_entry_qualifier:
+ *
+ */
+void
+mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_EVENT_TRIGGER_T *event_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
+		ioc->name, __func__, event, log_entry_qualifier));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	event_trigger = ioc->diag_trigger_event.EventTriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries
+	    && !found_match; i++, event_trigger++) {
+		if (event_trigger->EventValue != event)
+			continue;
+		if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
+			if (event_trigger->LogEntryQualifier ==
+			    log_entry_qualifier)
+				found_match = 1;
+			continue;
+		}
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+			"%s: setting diag_trigger_active flag\n",
+			ioc->name, __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_EVENT;
+	event_data.u.event.EventValue = event;
+	event_data.u.event.LogEntryQualifier = log_entry_qualifier;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_scsi - SCSI trigger handler
+ * @ioc: per adapter object
+ * @sense_key:
+ * @asc:
+ * @ascq:
+ *
+ */
+void
+mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc,
+	u8 ascq)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_SCSI_TRIGGER_T *scsi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
+		ioc->name, __func__, sense_key, asc, ascq));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries
+	    && !found_match; i++, scsi_trigger++) {
+		if (scsi_trigger->SenseKey != sense_key)
+			continue;
+		if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc))
+			continue;
+		if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_SCSI;
+	event_data.u.scsi.SenseKey = sense_key;
+	event_data.u.scsi.ASC = asc;
+	event_data.u.scsi.ASCQ = ascq;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
+
+/**
+ * mpt3sas_trigger_mpi - MPI trigger handler
+ * @ioc: per adapter object
+ * @ioc_status:
+ * @loginfo:
+ *
+ */
+void
+mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_MPI_TRIGGER_T *mpi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
+		ioc->name, __func__, ioc_status, loginfo));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries
+	    && !found_match; i++, mpi_trigger++) {
+		if (mpi_trigger->IOCStatus != ioc_status)
+			continue;
+		if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF ||
+		    mpi_trigger->IocLogInfo == loginfo))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT
+		"%s: setting diag_trigger_active flag\n",
+		ioc->name, __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MPI;
+	event_data.u.mpi.IOCStatus = ioc_status;
+	event_data.u.mpi.IocLogInfo = loginfo;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name,
+	    __func__));
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
new file mode 100644
index 0000000..a10c309
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
@@ -0,0 +1,193 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * to set Diagnostic triggers for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
+ * Copyright (C) 2012  LSI Corporation
+ *  (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+  /* Diagnostic Trigger Configuration Data Structures */
+
+#ifndef MPT3SAS_TRIGGER_DIAG_H_INCLUDED
+#define MPT3SAS_TRIGGER_DIAG_H_INCLUDED
+
+/* limitation on number of entries */
+#define NUM_VALID_ENTRIES               (20)
+
+/* trigger types */
+#define MPT3SAS_TRIGGER_MASTER          (1)
+#define MPT3SAS_TRIGGER_EVENT           (2)
+#define MPT3SAS_TRIGGER_SCSI            (3)
+#define MPT3SAS_TRIGGER_MPI             (4)
+
+/* trigger names */
+#define MASTER_TRIGGER_FILE_NAME        "diag_trigger_master"
+#define EVENT_TRIGGERS_FILE_NAME        "diag_trigger_event"
+#define SCSI_TRIGGERS_FILE_NAME         "diag_trigger_scsi"
+#define MPI_TRIGGER_FILE_NAME           "diag_trigger_mpi"
+
+/* master trigger bitmask */
+#define MASTER_TRIGGER_FW_FAULT         (0x00000001)
+#define MASTER_TRIGGER_ADAPTER_RESET    (0x00000002)
+#define MASTER_TRIGGER_TASK_MANAGMENT   (0x00000004)
+#define MASTER_TRIGGER_DEVICE_REMOVAL   (0x00000008)
+
+/* fake firmware event for tigger */
+#define MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED	(0x6E)
+
+/**
+ * MasterTrigger is a single U32 passed to/from sysfs.
+ *
+ * Bit Flags (enables) include:
+ * 1. FW Faults
+ * 2. Adapter Reset issued by driver
+ * 3. TMs
+ * 4. Device Remove Event sent by FW
+ */
+
+struct SL_WH_MASTER_TRIGGER_T {
+	uint32_t MasterData;
+};
+
+/**
+ * struct SL_WH_EVENT_TRIGGER_T -  Definition of an event trigger element
+ * @EventValue: Event Code to trigger on
+ * @LogEntryQualifier: Type of FW event that logged (Log Entry Added Event only)
+ *
+ * Defines an event that should induce a DIAG_TRIGGER driver event if observed.
+ */
+struct SL_WH_EVENT_TRIGGER_T {
+	uint16_t EventValue;
+	uint16_t LogEntryQualifier;
+};
+
+/**
+ * struct SL_WH_EVENT_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of Event Triggers to be monitored for.
+ * @ValidEntries: Number of _SL_WH_EVENT_TRIGGER_T structures contained in this
+ *    structure.
+ * @EventTriggerEntry: List of Event trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set Event Triggers
+ * in the Linux Driver.
+ */
+
+struct SL_WH_EVENT_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_EVENT_TRIGGER_T EventTriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_SCSI_TRIGGER_T -  Definition of a SCSI trigger element
+ * @ASCQ: Additional Sense Code Qualifier.  Can be specific or 0xFF for
+ *     wildcard.
+ * @ASC: Additional Sense Code.  Can be specific or 0xFF for wildcard
+ * @SenseKey: SCSI Sense Key
+ *
+ * Defines a sense key (single or many variants) that should induce a
+ * DIAG_TRIGGER driver event if observed.
+ */
+struct SL_WH_SCSI_TRIGGER_T {
+	U8 ASCQ;
+	U8 ASC;
+	U8 SenseKey;
+	U8 Reserved;
+};
+
+/**
+ * struct SL_WH_SCSI_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of SCSI sense codes that should trigger a DIAG_SERVICE event when
+ *    observed.
+ * @ValidEntries: Number of _SL_WH_SCSI_TRIGGER_T structures contained in this
+ *    structure.
+ * @SCSITriggerEntry: List of SCSI Sense Code trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set SCSI Sense Code
+ * Triggers in the Linux Driver.
+ */
+struct SL_WH_SCSI_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_SCSI_TRIGGER_T SCSITriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_MPI_TRIGGER_T -  Definition of an MPI trigger element
+ * @IOCStatus: MPI IOCStatus
+ * @IocLogInfo: MPI IocLogInfo.  Can be specific or 0xFFFFFFFF for wildcard
+ *
+ * Defines a MPI IOCStatus/IocLogInfo pair that should induce a DIAG_TRIGGER
+ * driver event if observed.
+ */
+struct SL_WH_MPI_TRIGGER_T {
+	uint16_t IOCStatus;
+	uint16_t Reserved;
+	uint32_t IocLogInfo;
+};
+
+/**
+ * struct SL_WH_MPI_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of MPI IOCStatus/IocLogInfo pairs that should trigger a DIAG_SERVICE
+ *    event when observed.
+ * @ValidEntries: Number of _SL_WH_MPI_TRIGGER_T structures contained in this
+ *    structure.
+ * @MPITriggerEntry: List of MPI IOCStatus/IocLogInfo trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set MPI Error Triggers
+ * in the Linux Driver.
+ */
+struct SL_WH_MPI_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_MPI_TRIGGER_T MPITriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_TRIGGERS_EVENT_DATA_T -  event data for trigger
+ * @trigger_type: trigger type (see MPT3SAS_TRIGGER_XXXX)
+ * @u: trigger condition that caused trigger to be sent
+ */
+struct SL_WH_TRIGGERS_EVENT_DATA_T {
+	uint32_t trigger_type;
+	union {
+		struct SL_WH_MASTER_TRIGGER_T master;
+		struct SL_WH_EVENT_TRIGGER_T event;
+		struct SL_WH_SCSI_TRIGGER_T scsi;
+		struct SL_WH_MPI_TRIGGER_T mpi;
+	} u;
+};
+#endif /* MPT3SAS_TRIGGER_DIAG_H_INCLUDED */
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 8f7eb4f..487aa6f 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -258,21 +258,11 @@ enum sas_sata_phy_regs {
 #define SPI_ADDR_VLD_94XX         	(1U << 1)
 #define SPI_CTRL_SpiStart_94XX     	(1U << 0)
 
-#define mv_ffc(x)   ffz(x)
-
 static inline int
 mv_ffc64(u64 v)
 {
-	int i;
-	i = mv_ffc((u32)v);
-	if (i >= 0)
-		return i;
-	i = mv_ffc((u32)(v>>32));
-
-	if (i != 0)
-		return 32 + i;
-
-	return -1;
+	u64 x = ~v;
+	return x ? __ffs64(x) : -1;
 }
 
 #define r_reg_set_enable(i) \
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index c04a4f5..da24955 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -69,7 +69,7 @@ extern struct kmem_cache *mvs_task_list_cache;
 #define DEV_IS_EXPANDER(type)	\
 	((type == EDGE_DEV) || (type == FANOUT_DEV))
 
-#define bit(n) ((u32)1 << n)
+#define bit(n) ((u64)1 << n)
 
 #define for_each_phy(__lseq_mask, __mc, __lseq)			\
 	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index d4ed9eb..4375417 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -97,9 +97,37 @@ struct osd_dev_handle {
 
 static DEFINE_IDA(osd_minor_ida);
 
+/*
+ * scsi sysfs attribute operations
+ */
+static ssize_t osdname_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct osd_uld_device *ould = container_of(dev, struct osd_uld_device,
+						   class_dev);
+	return sprintf(buf, "%s\n", ould->odi.osdname);
+}
+
+static ssize_t systemid_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct osd_uld_device *ould = container_of(dev, struct osd_uld_device,
+						   class_dev);
+
+	memcpy(buf, ould->odi.systemid, ould->odi.systemid_len);
+	return ould->odi.systemid_len;
+}
+
+static struct device_attribute osd_uld_attrs[] = {
+	__ATTR(osdname, S_IRUGO, osdname_show, NULL),
+	__ATTR(systemid, S_IRUGO, systemid_show, NULL),
+	__ATTR_NULL,
+};
+
 static struct class osd_uld_class = {
 	.owner		= THIS_MODULE,
 	.name		= "scsi_osd",
+	.dev_attrs	= osd_uld_attrs,
 };
 
 /*
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 1c28215..83d7984 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1615,8 +1615,7 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
 	 */
-	if (fcport->loop_id != FC_NO_LOOP_ID &&
-	    !test_bit(UNLOADING, &fcport->vha->dpc_flags)) {
+	if (fcport->loop_id != FC_NO_LOOP_ID) {
 		if (IS_FWI2_CAPABLE(fcport->vha->hw))
 			fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
 			    fcport->loop_id, fcport->d_id.b.domain,
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 2f9bddd..9f34ded 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -219,7 +219,8 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 		break;
 	}
 exit_fcp_prio_cfg:
-	bsg_job->job_done(bsg_job);
+	if (!ret)
+		bsg_job->job_done(bsg_job);
 	return ret;
 }
 
@@ -741,9 +742,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 			if (qla81xx_get_port_config(vha, config)) {
 				ql_log(ql_log_warn, vha, 0x701f,
 				    "Get port config failed.\n");
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EPERM;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 
 			ql_dbg(ql_dbg_user, vha, 0x70c0,
@@ -761,9 +761,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 				    new_config, elreq.options);
 
 			if (rval) {
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EPERM;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 
 			type = "FC_BSG_HST_VENDOR_LOOPBACK";
@@ -795,9 +794,8 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 					    "MPI reset failed.\n");
 				}
 
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EIO;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 		} else {
 			type = "FC_BSG_HST_VENDOR_LOOPBACK";
@@ -812,34 +810,27 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 		ql_log(ql_log_warn, vha, 0x702c,
 		    "Vendor request %s failed.\n", type);
 
-		fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
-		    sizeof(struct fc_bsg_reply);
-
-		memcpy(fw_sts_ptr, response, sizeof(response));
-		fw_sts_ptr += sizeof(response);
-		*fw_sts_ptr = command_sent;
 		rval = 0;
 		bsg_job->reply->result = (DID_ERROR << 16);
+		bsg_job->reply->reply_payload_rcv_len = 0;
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x702d,
 		    "Vendor request %s completed.\n", type);
-
-		bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
-			sizeof(response) + sizeof(uint8_t);
-		bsg_job->reply->reply_payload_rcv_len =
-			bsg_job->reply_payload.payload_len;
-		fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
-			sizeof(struct fc_bsg_reply);
-		memcpy(fw_sts_ptr, response, sizeof(response));
-		fw_sts_ptr += sizeof(response);
-		*fw_sts_ptr = command_sent;
-		bsg_job->reply->result = DID_OK;
+		bsg_job->reply->result = (DID_OK << 16);
 		sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
 			bsg_job->reply_payload.sg_cnt, rsp_data,
 			rsp_data_len);
 	}
-	bsg_job->job_done(bsg_job);
 
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
+	    sizeof(response) + sizeof(uint8_t);
+	fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
+	    sizeof(struct fc_bsg_reply);
+	memcpy(fw_sts_ptr, response, sizeof(response));
+	fw_sts_ptr += sizeof(response);
+	*fw_sts_ptr = command_sent;
+
+done_free_dma_rsp:
 	dma_free_coherent(&ha->pdev->dev, rsp_data_len,
 		rsp_data, rsp_data_dma);
 done_free_dma_req:
@@ -853,6 +844,8 @@ done_unmap_req_sg:
 	dma_unmap_sg(&ha->pdev->dev,
 	    bsg_job->request_payload.sg_list,
 	    bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -877,16 +870,15 @@ qla84xx_reset(struct fc_bsg_job *bsg_job)
 	if (rval) {
 		ql_log(ql_log_warn, vha, 0x7030,
 		    "Vendor request 84xx reset failed.\n");
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7031,
 		    "Vendor request 84xx reset completed.\n");
 		bsg_job->reply->result = DID_OK;
+		bsg_job->job_done(bsg_job);
 	}
 
-	bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -976,8 +968,7 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
 		ql_log(ql_log_warn, vha, 0x7037,
 		    "Vendor request 84xx updatefw failed.\n");
 
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7038,
 		    "Vendor request 84xx updatefw completed.\n");
@@ -986,7 +977,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
 		bsg_job->reply->result = DID_OK;
 	}
 
-	bsg_job->job_done(bsg_job);
 	dma_pool_free(ha->s_dma_pool, mn, mn_dma);
 
 done_free_fw_buf:
@@ -996,6 +986,8 @@ done_unmap_sg:
 	dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
 		bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
 
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1163,8 +1155,7 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
 		ql_log(ql_log_warn, vha, 0x7043,
 		    "Vendor request 84xx mgmt failed.\n");
 
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7044,
@@ -1184,8 +1175,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
 		}
 	}
 
-	bsg_job->job_done(bsg_job);
-
 done_unmap_sg:
 	if (mgmt_b)
 		dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma);
@@ -1200,6 +1189,8 @@ done_unmap_sg:
 exit_mgmt:
 	dma_pool_free(ha->s_dma_pool, mn, mn_dma);
 
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1276,9 +1267,7 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
 		    fcport->port_name[3], fcport->port_name[4],
 		    fcport->port_name[5], fcport->port_name[6],
 		    fcport->port_name[7], rval, fcport->fp_speed, mb[0], mb[1]);
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
-
+		rval = (DID_ERROR << 16);
 	} else {
 		if (!port_param->mode) {
 			bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
@@ -1292,9 +1281,9 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
 		}
 
 		bsg_job->reply->result = DID_OK;
+		bsg_job->job_done(bsg_job);
 	}
 
-	bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1887,8 +1876,6 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
 		return qla24xx_process_bidir_cmd(bsg_job);
 
 	default:
-		bsg_job->reply->result = (DID_ERROR << 16);
-		bsg_job->job_done(bsg_job);
 		return -ENOSYS;
 	}
 }
@@ -1919,8 +1906,6 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
 		ql_dbg(ql_dbg_user, vha, 0x709f,
 		    "BSG: ISP abort active/needed -- cmd=%d.\n",
 		    bsg_job->request->msgcode);
-		bsg_job->reply->result = (DID_ERROR << 16);
-		bsg_job->job_done(bsg_job);
 		return -EBUSY;
 	}
 
@@ -1943,7 +1928,6 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
 	case FC_BSG_RPT_CT:
 	default:
 		ql_log(ql_log_warn, vha, 0x705a, "Unsupported BSG request.\n");
-		bsg_job->reply->result = ret;
 		break;
 	}
 	return ret;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 44efe3c..53f9e49 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -11,7 +11,7 @@
  * ----------------------------------------------------------------------
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
- * | Module Init and Probe        |       0x0124       | 0x4b,0xba,0xfa |
+ * | Module Init and Probe        |       0x0125       | 0x4b,0xba,0xfa |
  * | Mailbox commands             |       0x114f       | 0x111a-0x111b  |
  * |                              |                    | 0x112c-0x112e  |
  * |                              |                    | 0x113a         |
@@ -526,8 +526,8 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 		ha->max_req_queues : ha->max_rsp_queues;
 	mq->count = htonl(que_cnt);
 	for (cnt = 0; cnt < que_cnt; cnt++) {
-		reg = (struct device_reg_25xxmq *) ((void *)
-			ha->mqiobase + cnt * QLA_QUE_PAGE);
+		reg = (struct device_reg_25xxmq __iomem *)
+			(ha->mqiobase + cnt * QLA_QUE_PAGE);
 		que_idx = cnt * 4;
 		mq->qregs[que_idx] = htonl(RD_REG_DWORD(&reg->req_q_in));
 		mq->qregs[que_idx+1] = htonl(RD_REG_DWORD(&reg->req_q_out));
@@ -2268,7 +2268,7 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
 
 		if (!cnt) {
 			nxt = fw->code_ram;
-			nxt += sizeof(fw->code_ram),
+			nxt += sizeof(fw->code_ram);
 			nxt += (ha->fw_memory_size - 0x100000 + 1);
 			goto copy_queue;
 		} else
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index a9725bf..6e7727f4 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2486,9 +2486,9 @@ struct bidi_statistics {
 #define QLA_MAX_QUEUES 256
 #define ISP_QUE_REG(ha, id) \
 	((ha->mqenable || IS_QLA83XX(ha)) ? \
-	((void *)(ha->mqiobase) +\
+	((device_reg_t __iomem *)(ha->mqiobase) +\
 	(QLA_QUE_PAGE * id)) :\
-	((void *)(ha->iobase)))
+	((device_reg_t __iomem *)(ha->iobase)))
 #define QLA_REQ_QUE_ID(tag) \
 	((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0)
 #define QLA_DEFAULT_QUE_QOS 5
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 59524aa..be6d61a 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1092,6 +1092,27 @@ struct device_reg_24xx {
 	uint32_t unused_6[2];		/* Gap. */
 	uint32_t iobase_sdata;
 };
+/* RISC-RISC semaphore register PCI offet */
+#define RISC_REGISTER_BASE_OFFSET	0x7010
+#define RISC_REGISTER_WINDOW_OFFET	0x6
+
+/* RISC-RISC semaphore/flag register (risc address 0x7016) */
+
+#define RISC_SEMAPHORE		0x1UL
+#define RISC_SEMAPHORE_WE	(RISC_SEMAPHORE << 16)
+#define RISC_SEMAPHORE_CLR	(RISC_SEMAPHORE_WE | 0x0UL)
+#define RISC_SEMAPHORE_SET	(RISC_SEMAPHORE_WE | RISC_SEMAPHORE)
+
+#define RISC_SEMAPHORE_FORCE		0x8000UL
+#define RISC_SEMAPHORE_FORCE_WE		(RISC_SEMAPHORE_FORCE << 16)
+#define RISC_SEMAPHORE_FORCE_CLR	(RISC_SEMAPHORE_FORCE_WE | 0x0UL)
+#define RISC_SEMAPHORE_FORCE_SET	\
+		(RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE)
+
+/* RISC semaphore timeouts (ms) */
+#define TIMEOUT_SEMAPHORE		2500
+#define TIMEOUT_SEMAPHORE_FORCE		2000
+#define TIMEOUT_TOTAL_ELAPSED		4500
 
 /* Trace Control *************************************************************/
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 6acb397..2411d1a 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -416,7 +416,7 @@ extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
 extern void qla2x00_free_irqs(scsi_qla_host_t *);
 
 extern int qla2x00_get_data_rate(scsi_qla_host_t *);
-extern char *qla2x00_get_link_speed_str(struct qla_hw_data *);
+extern const char *qla2x00_get_link_speed_str(struct qla_hw_data *, uint16_t);
 
 /*
  * Global Function Prototypes in qla_sup.c source file.
@@ -598,7 +598,6 @@ extern void qla82xx_init_flags(struct qla_hw_data *);
 
 /* ISP 8021 hardware related */
 extern void qla82xx_set_drv_active(scsi_qla_host_t *);
-extern void qla82xx_crb_win_unlock(struct qla_hw_data *);
 extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32);
 extern int qla82xx_rd_32(struct qla_hw_data *, ulong);
 extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index f4e4bd7..01efc0e 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -218,6 +218,9 @@ qla2x00_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport)
 		memcpy(fcport->port_name, ct_rsp->rsp.ga_nxt.port_name,
 		    WWN_SIZE);
 
+		fcport->fc4_type = (ct_rsp->rsp.ga_nxt.fc4_types[2] & BIT_0) ?
+		    FC4_TYPE_FCP_SCSI : FC4_TYPE_OTHER;
+
 		if (ct_rsp->rsp.ga_nxt.port_type != NS_N_PORT_TYPE &&
 		    ct_rsp->rsp.ga_nxt.port_type != NS_NL_PORT_TYPE)
 			fcport->d_id.b.domain = 0xf0;
@@ -1930,6 +1933,9 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list)
 			case BIT_11:
 				list[i].fp_speed = PORT_SPEED_8GB;
 				break;
+			case BIT_10:
+				list[i].fp_speed = PORT_SPEED_16GB;
+				break;
 			}
 
 			ql_dbg(ql_dbg_disc, vha, 0x205b,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 48fca47..563eee3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -429,7 +429,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 /*                QLogic ISP2x00 Hardware Support Functions.                */
 /****************************************************************************/
 
-int
+static int
 qla83xx_nic_core_fw_load(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
@@ -997,7 +997,7 @@ qla2x00_reset_chip(scsi_qla_host_t *vha)
  *
  * Returns 0 on success.
  */
-int
+static int
 qla81xx_reset_mpi(scsi_qla_host_t *vha)
 {
 	uint16_t mb[4] = {0x1010, 0, 1, 0};
@@ -1095,6 +1095,83 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 		ha->isp_ops->enable_intrs(ha);
 }
 
+static void
+qla25xx_read_risc_sema_reg(scsi_qla_host_t *vha, uint32_t *data)
+{
+	struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;
+
+	WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
+	*data = RD_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET);
+
+}
+
+static void
+qla25xx_write_risc_sema_reg(scsi_qla_host_t *vha, uint32_t data)
+{
+	struct device_reg_24xx __iomem *reg = &vha->hw->iobase->isp24;
+
+	WRT_REG_DWORD(&reg->iobase_addr, RISC_REGISTER_BASE_OFFSET);
+	WRT_REG_DWORD(&reg->iobase_window + RISC_REGISTER_WINDOW_OFFET, data);
+}
+
+static void
+qla25xx_manipulate_risc_semaphore(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t wd32 = 0;
+	uint delta_msec = 100;
+	uint elapsed_msec = 0;
+	uint timeout_msec;
+	ulong n;
+
+	if (!IS_QLA25XX(ha) && !IS_QLA2031(ha))
+		return;
+
+attempt:
+	timeout_msec = TIMEOUT_SEMAPHORE;
+	n = timeout_msec / delta_msec;
+	while (n--) {
+		qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_SET);
+		qla25xx_read_risc_sema_reg(vha, &wd32);
+		if (wd32 & RISC_SEMAPHORE)
+			break;
+		msleep(delta_msec);
+		elapsed_msec += delta_msec;
+		if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
+			goto force;
+	}
+
+	if (!(wd32 & RISC_SEMAPHORE))
+		goto force;
+
+	if (!(wd32 & RISC_SEMAPHORE_FORCE))
+		goto acquired;
+
+	qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_CLR);
+	timeout_msec = TIMEOUT_SEMAPHORE_FORCE;
+	n = timeout_msec / delta_msec;
+	while (n--) {
+		qla25xx_read_risc_sema_reg(vha, &wd32);
+		if (!(wd32 & RISC_SEMAPHORE_FORCE))
+			break;
+		msleep(delta_msec);
+		elapsed_msec += delta_msec;
+		if (elapsed_msec > TIMEOUT_TOTAL_ELAPSED)
+			goto force;
+	}
+
+	if (wd32 & RISC_SEMAPHORE_FORCE)
+		qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_CLR);
+
+	goto attempt;
+
+force:
+	qla25xx_write_risc_sema_reg(vha, RISC_SEMAPHORE_FORCE_SET);
+
+acquired:
+	return;
+}
+
 /**
  * qla24xx_reset_chip() - Reset ISP24xx chip.
  * @ha: HA context
@@ -1113,6 +1190,8 @@ qla24xx_reset_chip(scsi_qla_host_t *vha)
 
 	ha->isp_ops->disable_intrs(ha);
 
+	qla25xx_manipulate_risc_semaphore(vha);
+
 	/* Perform RISC reset. */
 	qla24xx_reset_risc(vha);
 }
@@ -1888,10 +1967,6 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 		qla2x00_init_response_q_entries(rsp);
 	}
 
-	spin_lock(&ha->vport_slock);
-
-	spin_unlock(&ha->vport_slock);
-
 	ha->tgt.atio_ring_ptr = ha->tgt.atio_ring;
 	ha->tgt.atio_ring_index = 0;
 	/* Initialize ATIO queue entries */
@@ -1971,6 +2046,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 		    "Waiting for LIP to complete.\n");
 
 	do {
+		memset(state, -1, sizeof(state));
 		rval = qla2x00_get_firmware_state(vha, state);
 		if (rval == QLA_SUCCESS) {
 			if (state[0] < FSTATE_LOSS_OF_SYNC) {
@@ -2907,7 +2983,6 @@ cleanup_allocation:
 static void
 qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
-	char *link_speed;
 	int rval;
 	uint16_t mb[4];
 	struct qla_hw_data *ha = vha->hw;
@@ -2934,10 +3009,10 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    fcport->port_name[6], fcport->port_name[7], rval,
 		    fcport->fp_speed, mb[0], mb[1]);
 	} else {
-		link_speed = qla2x00_get_link_speed_str(ha);
 		ql_dbg(ql_dbg_disc, vha, 0x2005,
 		    "iIDMA adjusted to %s GB/s "
-		    "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", link_speed,
+		    "on %02x%02x%02x%02x%02x%02x%02x%02x.\n",
+		    qla2x00_get_link_speed_str(ha, fcport->fp_speed),
 		    fcport->port_name[0], fcport->port_name[1],
 		    fcport->port_name[2], fcport->port_name[3],
 		    fcport->port_name[4], fcport->port_name[5],
@@ -3007,10 +3082,10 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	fcport->login_retry = 0;
 	fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
 
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 	qla2x00_iidma_fcport(vha, fcport);
 	qla24xx_update_fcport_fcp_prio(vha, fcport);
 	qla2x00_reg_remote_port(vha, fcport);
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 }
 
 /*
@@ -3868,7 +3943,7 @@ qla83xx_reset_ownership(scsi_qla_host_t *vha)
 	}
 }
 
-int
+static int
 __qla83xx_set_drv_ack(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
@@ -3884,19 +3959,7 @@ __qla83xx_set_drv_ack(scsi_qla_host_t *vha)
 	return rval;
 }
 
-int
-qla83xx_set_drv_ack(scsi_qla_host_t *vha)
-{
-	int rval = QLA_SUCCESS;
-
-	qla83xx_idc_lock(vha, 0);
-	rval = __qla83xx_set_drv_ack(vha);
-	qla83xx_idc_unlock(vha, 0);
-
-	return rval;
-}
-
-int
+static int
 __qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
@@ -3912,19 +3975,7 @@ __qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
 	return rval;
 }
 
-int
-qla83xx_clear_drv_ack(scsi_qla_host_t *vha)
-{
-	int rval = QLA_SUCCESS;
-
-	qla83xx_idc_lock(vha, 0);
-	rval = __qla83xx_clear_drv_ack(vha);
-	qla83xx_idc_unlock(vha, 0);
-
-	return rval;
-}
-
-const char *
+static const char *
 qla83xx_dev_state_to_string(uint32_t dev_state)
 {
 	switch (dev_state) {
@@ -3978,7 +4029,7 @@ qla83xx_idc_audit(scsi_qla_host_t *vha, int audit_type)
 }
 
 /* Assumes idc_lock always held on entry */
-int
+static int
 qla83xx_initiating_reset(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
@@ -4026,36 +4077,12 @@ __qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
 }
 
 int
-qla83xx_set_idc_control(scsi_qla_host_t *vha, uint32_t idc_control)
-{
-	int rval = QLA_SUCCESS;
-
-	qla83xx_idc_lock(vha, 0);
-	rval = __qla83xx_set_idc_control(vha, idc_control);
-	qla83xx_idc_unlock(vha, 0);
-
-	return rval;
-}
-
-int
 __qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
 {
 	return qla83xx_rd_reg(vha, QLA83XX_IDC_CONTROL, idc_control);
 }
 
-int
-qla83xx_get_idc_control(scsi_qla_host_t *vha, uint32_t *idc_control)
-{
-	int rval = QLA_SUCCESS;
-
-	qla83xx_idc_lock(vha, 0);
-	rval = __qla83xx_get_idc_control(vha, idc_control);
-	qla83xx_idc_unlock(vha, 0);
-
-	return rval;
-}
-
-int
+static int
 qla83xx_check_driver_presence(scsi_qla_host_t *vha)
 {
 	uint32_t drv_presence = 0;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 03b7526..a481684 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -520,7 +520,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
 
 	mrk24 = NULL;
 	req = ha->req_q_map[0];
-	mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, 0);
+	mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, NULL);
 	if (mrk == NULL) {
 		ql_log(ql_log_warn, base_vha, 0x3026,
 		    "Failed to allocate Marker IOCB.\n");
@@ -2551,7 +2551,7 @@ sufficient_dsds:
 			(unsigned long __iomem *)ha->nxdb_wr_ptr,
 			dbval);
 		wmb();
-		while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) {
+		while (RD_REG_DWORD((void __iomem *)ha->nxdb_rd_ptr) != dbval) {
 			WRT_REG_DWORD(
 				(unsigned long __iomem *)ha->nxdb_wr_ptr,
 				dbval);
@@ -2748,7 +2748,6 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
 	struct rsp_que *rsp;
 	struct req_que *req;
 	int rval = EXT_STATUS_OK;
-	device_reg_t __iomem *reg = ISP_QUE_REG(ha, vha->req->id);
 
 	rval = QLA_SUCCESS;
 
@@ -2786,15 +2785,7 @@ qla2x00_start_bidir(srb_t *sp, struct scsi_qla_host *vha, uint32_t tot_dsds)
 
 	/* Check for room on request queue. */
 	if (req->cnt < req_cnt + 2) {
-		if (ha->mqenable)
-			cnt = RD_REG_DWORD(&reg->isp25mq.req_q_out);
-		else if (IS_QLA82XX(ha))
-			cnt = RD_REG_DWORD(&reg->isp82.req_q_out);
-		else if (IS_FWI2_CAPABLE(ha))
-			cnt = RD_REG_DWORD(&reg->isp24.req_q_out);
-		else
-			cnt = qla2x00_debounce_register(
-					ISP_REQ_Q_OUT(ha, &reg->isp));
+		cnt = RD_REG_DWORD_RELAXED(req->req_q_out);
 
 		if  (req->ring_index < cnt)
 			req->cnt = cnt - req->ring_index;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 9d1c7b5..873c820 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -316,28 +316,24 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
 }
 
 #define LS_UNKNOWN	2
-char *
-qla2x00_get_link_speed_str(struct qla_hw_data *ha)
+const char *
+qla2x00_get_link_speed_str(struct qla_hw_data *ha, uint16_t speed)
 {
-	static char *link_speeds[] = {"1", "2", "?", "4", "8", "16", "10"};
-	char *link_speed;
-	int fw_speed = ha->link_data_rate;
+	static const char * const link_speeds[] = {
+		"1", "2", "?", "4", "8", "16", "10"
+	};
 
 	if (IS_QLA2100(ha) || IS_QLA2200(ha))
-		link_speed = link_speeds[0];
-	else if (fw_speed == 0x13)
-		link_speed = link_speeds[6];
-	else {
-		link_speed = link_speeds[LS_UNKNOWN];
-		if (fw_speed < 6)
-			link_speed =
-			    link_speeds[fw_speed];
-	}
-
-	return link_speed;
+		return link_speeds[0];
+	else if (speed == 0x13)
+		return link_speeds[6];
+	else if (speed < 6)
+		return link_speeds[speed];
+	else
+		return link_speeds[LS_UNKNOWN];
 }
 
-void
+static void
 qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
 {
 	struct qla_hw_data *ha = vha->hw;
@@ -671,7 +667,7 @@ skip_rio:
 
 		ql_dbg(ql_dbg_async, vha, 0x500a,
 		    "LOOP UP detected (%s Gbps).\n",
-		    qla2x00_get_link_speed_str(ha));
+		    qla2x00_get_link_speed_str(ha, ha->link_data_rate));
 
 		vha->flags.management_server_logged_in = 0;
 		qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
@@ -860,7 +856,7 @@ skip_rio:
 		    mb[1], mb[2], mb[3]);
 		ql_log(ql_log_warn, vha, 0x505f,
 		    "Link is operational (%s Gbps).\n",
-		    qla2x00_get_link_speed_str(ha));
+		    qla2x00_get_link_speed_str(ha, ha->link_data_rate));
 
 		/*
 		 * Mark all devices as missing so we will login again.
@@ -2944,7 +2940,9 @@ skip_msi:
 		    "Failed to reserve interrupt %d already in use.\n",
 		    ha->pdev->irq);
 		goto fail;
-	}
+	} else if (!ha->flags.msi_enabled)
+		ql_dbg(ql_dbg_init, vha, 0x0125,
+		    "INTa mode: Enabled.\n");
 
 clear_risc_ints:
 
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 18c509f..68c55ea 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3122,7 +3122,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 		if (vp_idx == 0 && (MSB(stat) != 1))
 			goto reg_needed;
 
-		if (MSB(stat) != 0) {
+		if (MSB(stat) != 0 && MSB(stat) != 2) {
 			ql_dbg(ql_dbg_mbx, vha, 0x10ba,
 			    "Could not acquire ID for VP[%d].\n", vp_idx);
 			return;
@@ -3536,7 +3536,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
 	if (IS_QLA83XX(ha))
 		mcp->mb[15] = 0;
 
-	reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) +
+	reg = (struct device_reg_25xxmq __iomem *)((ha->mqiobase) +
 		QLA_QUE_PAGE * req->id);
 
 	mcp->mb[4] = req->id;
@@ -3605,7 +3605,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 	if (IS_QLA83XX(ha))
 		mcp->mb[15] = 0;
 
-	reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) +
+	reg = (struct device_reg_25xxmq __iomem *)((ha->mqiobase) +
 		QLA_QUE_PAGE * rsp->id);
 
 	mcp->mb[4] = rsp->id;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index f5e297c..3e3f593 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -36,7 +36,7 @@
 
 #define MAX_CRB_XFORM 60
 static unsigned long crb_addr_xform[MAX_CRB_XFORM];
-int qla82xx_crb_table_initialized;
+static int qla82xx_crb_table_initialized;
 
 #define qla82xx_crb_addr_transform(name) \
 	(crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \
@@ -102,7 +102,7 @@ static void qla82xx_crb_addr_transform_setup(void)
 	qla82xx_crb_table_initialized = 1;
 }
 
-struct crb_128M_2M_block_map crb_128M_2M_map[64] = {
+static struct crb_128M_2M_block_map crb_128M_2M_map[64] = {
 	{{{0, 0,         0,         0} } },
 	{{{1, 0x0100000, 0x0102000, 0x120000},
 	{1, 0x0110000, 0x0120000, 0x130000},
@@ -262,7 +262,7 @@ struct crb_128M_2M_block_map crb_128M_2M_map[64] = {
 /*
  * top 12 bits of crb internal address (hub, agent)
  */
-unsigned qla82xx_crb_hub_agt[64] = {
+static unsigned qla82xx_crb_hub_agt[64] = {
 	0,
 	QLA82XX_HW_CRB_HUB_AGT_ADR_PS,
 	QLA82XX_HW_CRB_HUB_AGT_ADR_MN,
@@ -330,7 +330,7 @@ unsigned qla82xx_crb_hub_agt[64] = {
 };
 
 /* Device states */
-char *q_dev_state[] = {
+static char *q_dev_state[] = {
 	 "Unknown",
 	"Cold",
 	"Initializing",
@@ -359,12 +359,13 @@ qla82xx_pci_set_crbwindow_2M(struct qla_hw_data *ha, ulong *off)
 
 	ha->crb_win = CRB_HI(*off);
 	writel(ha->crb_win,
-		(void *)(CRB_WINDOW_2M + ha->nx_pcibase));
+		(void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase));
 
 	/* Read back value to make sure write has gone through before trying
 	 * to use it.
 	 */
-	win_read = RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase));
+	win_read = RD_REG_DWORD((void __iomem *)
+	    (CRB_WINDOW_2M + ha->nx_pcibase));
 	if (win_read != ha->crb_win) {
 		ql_dbg(ql_dbg_p3p, vha, 0xb000,
 		    "%s: Written crbwin (0x%x) "
@@ -567,7 +568,7 @@ qla82xx_pci_mem_bound_check(struct qla_hw_data *ha,
 		return 1;
 }
 
-int qla82xx_pci_set_window_warning_count;
+static int qla82xx_pci_set_window_warning_count;
 
 static unsigned long
 qla82xx_pci_set_window(struct qla_hw_data *ha, unsigned long long addr)
@@ -677,10 +678,10 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha,
 	u64 off, void *data, int size)
 {
 	unsigned long   flags;
-	void           *addr = NULL;
+	void __iomem *addr = NULL;
 	int             ret = 0;
 	u64             start;
-	uint8_t         *mem_ptr = NULL;
+	uint8_t __iomem  *mem_ptr = NULL;
 	unsigned long   mem_base;
 	unsigned long   mem_page;
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
@@ -712,7 +713,7 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha,
 		mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
 	else
 		mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
-	if (mem_ptr == 0UL) {
+	if (mem_ptr == NULL) {
 		*(u8  *)data = 0;
 		return -1;
 	}
@@ -749,10 +750,10 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha,
 	u64 off, void *data, int size)
 {
 	unsigned long   flags;
-	void           *addr = NULL;
+	void  __iomem *addr = NULL;
 	int             ret = 0;
 	u64             start;
-	uint8_t         *mem_ptr = NULL;
+	uint8_t __iomem *mem_ptr = NULL;
 	unsigned long   mem_base;
 	unsigned long   mem_page;
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
@@ -784,7 +785,7 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha,
 		mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2);
 	else
 		mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
-	if (mem_ptr == 0UL)
+	if (mem_ptr == NULL)
 		return -1;
 
 	addr = mem_ptr;
@@ -908,24 +909,24 @@ qla82xx_wait_rom_done(struct qla_hw_data *ha)
 	return 0;
 }
 
-int
+static int
 qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag)
 {
 	uint32_t  off_value, rval = 0;
 
-	WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase),
+	WRT_REG_DWORD((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase),
 	    (off & 0xFFFF0000));
 
 	/* Read back value to make sure write has gone through */
-	RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase));
+	RD_REG_DWORD((void __iomem *)(CRB_WINDOW_2M + ha->nx_pcibase));
 	off_value  = (off & 0x0000FFFF);
 
 	if (flag)
-		WRT_REG_DWORD((void *)
+		WRT_REG_DWORD((void __iomem *)
 		    (off_value + CRB_INDIRECT_2M + ha->nx_pcibase),
 		    data);
 	else
-		rval = RD_REG_DWORD((void *)
+		rval = RD_REG_DWORD((void __iomem *)
 		    (off_value + CRB_INDIRECT_2M + ha->nx_pcibase));
 
 	return rval;
@@ -1654,7 +1655,6 @@ qla82xx_iospace_config(struct qla_hw_data *ha)
 	if (!ha->nx_pcibase) {
 		ql_log_pci(ql_log_fatal, ha->pdev, 0x000e,
 		    "Cannot remap pcibase MMIO, aborting.\n");
-		pci_release_regions(ha->pdev);
 		goto iospace_error_exit;
 	}
 
@@ -1669,7 +1669,6 @@ qla82xx_iospace_config(struct qla_hw_data *ha)
 		if (!ha->nxdb_wr_ptr) {
 			ql_log_pci(ql_log_fatal, ha->pdev, 0x000f,
 			    "Cannot remap MMIO, aborting.\n");
-			pci_release_regions(ha->pdev);
 			goto iospace_error_exit;
 		}
 
@@ -1764,14 +1763,6 @@ void qla82xx_config_rings(struct scsi_qla_host *vha)
 	WRT_REG_DWORD((unsigned long  __iomem *)&reg->rsp_q_out[0], 0);
 }
 
-void qla82xx_reset_adapter(struct scsi_qla_host *vha)
-{
-	struct qla_hw_data *ha = vha->hw;
-	vha->flags.online = 0;
-	qla2x00_try_to_stop_firmware(vha);
-	ha->isp_ops->disable_intrs(ha);
-}
-
 static int
 qla82xx_fw_load_from_blob(struct qla_hw_data *ha)
 {
@@ -1856,7 +1847,7 @@ qla82xx_set_product_offset(struct qla_hw_data *ha)
 	return -1;
 }
 
-int
+static int
 qla82xx_validate_firmware_blob(scsi_qla_host_t *vha, uint8_t fw_type)
 {
 	__le32 val;
@@ -1961,20 +1952,6 @@ qla82xx_check_rcvpeg_state(struct qla_hw_data *ha)
 }
 
 /* ISR related functions */
-uint32_t qla82xx_isr_int_target_mask_enable[8] = {
-	ISR_INT_TARGET_MASK, ISR_INT_TARGET_MASK_F1,
-	ISR_INT_TARGET_MASK_F2, ISR_INT_TARGET_MASK_F3,
-	ISR_INT_TARGET_MASK_F4, ISR_INT_TARGET_MASK_F5,
-	ISR_INT_TARGET_MASK_F7, ISR_INT_TARGET_MASK_F7
-};
-
-uint32_t qla82xx_isr_int_target_status[8] = {
-	ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
-	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3,
-	ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5,
-	ISR_INT_TARGET_STATUS_F7, ISR_INT_TARGET_STATUS_F7
-};
-
 static struct qla82xx_legacy_intr_set legacy_intr[] = \
 	QLA82XX_LEGACY_INTR_CONFIG;
 
@@ -2813,7 +2790,7 @@ qla82xx_start_iocbs(scsi_qla_host_t *vha)
 	else {
 		WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval);
 		wmb();
-		while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) {
+		while (RD_REG_DWORD((void __iomem *)ha->nxdb_rd_ptr) != dbval) {
 			WRT_REG_DWORD((unsigned long  __iomem *)ha->nxdb_wr_ptr,
 				dbval);
 			wmb();
@@ -2821,7 +2798,8 @@ qla82xx_start_iocbs(scsi_qla_host_t *vha)
 	}
 }
 
-void qla82xx_rom_lock_recovery(struct qla_hw_data *ha)
+static void
+qla82xx_rom_lock_recovery(struct qla_hw_data *ha)
 {
 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
 
@@ -3177,7 +3155,7 @@ qla82xx_check_md_needed(scsi_qla_host_t *vha)
 }
 
 
-int
+static int
 qla82xx_check_fw_alive(scsi_qla_host_t *vha)
 {
 	uint32_t fw_heartbeat_counter;
@@ -3817,7 +3795,8 @@ qla82xx_minidump_process_rdocm(scsi_qla_host_t *vha,
 	loop_cnt = ocm_hdr->op_count;
 
 	for (i = 0; i < loop_cnt; i++) {
-		r_value = RD_REG_DWORD((void *)(r_addr + ha->nx_pcibase));
+		r_value = RD_REG_DWORD((void __iomem *)
+		    (r_addr + ha->nx_pcibase));
 		*data_ptr++ = cpu_to_le32(r_value);
 		r_addr += r_stride;
 	}
@@ -4376,7 +4355,7 @@ qla82xx_md_free(scsi_qla_host_t *vha)
 		    ha->md_tmplt_hdr, ha->md_template_size / 1024);
 		dma_free_coherent(&ha->pdev->dev, ha->md_template_size,
 		    ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma);
-		ha->md_tmplt_hdr = 0;
+		ha->md_tmplt_hdr = NULL;
 	}
 
 	/* Release the template data buffer allocated */
@@ -4386,7 +4365,7 @@ qla82xx_md_free(scsi_qla_host_t *vha)
 		    ha->md_dump, ha->md_dump_size / 1024);
 		vfree(ha->md_dump);
 		ha->md_dump_size = 0;
-		ha->md_dump = 0;
+		ha->md_dump = NULL;
 	}
 }
 
@@ -4423,7 +4402,7 @@ qla82xx_md_prep(scsi_qla_host_t *vha)
 				dma_free_coherent(&ha->pdev->dev,
 				    ha->md_template_size,
 				    ha->md_tmplt_hdr, ha->md_tmplt_hdr_dma);
-				ha->md_tmplt_hdr = 0;
+				ha->md_tmplt_hdr = NULL;
 			}
 
 		}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d501bf5..3a1661c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -41,7 +41,7 @@ static struct kmem_cache *ctx_cachep;
  */
 int ql_errlev = ql_log_all;
 
-int ql2xenableclass2;
+static int ql2xenableclass2;
 module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xenableclass2,
 		"Specify if Class 2 operations are supported from the very "
@@ -89,6 +89,8 @@ MODULE_PARM_DESC(ql2xextended_error_logging,
 		"\t\t0x00200000 - AER/EEH.       0x00100000 - Multi Q.\n"
 		"\t\t0x00080000 - P3P Specific.  0x00040000 - Virtual Port.\n"
 		"\t\t0x00020000 - Buffer Dump.   0x00010000 - Misc.\n"
+		"\t\t0x00008000 - Verbose.       0x00004000 - Target.\n"
+		"\t\t0x00002000 - Target Mgmt.   0x00001000 - Target TMF.\n"
 		"\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
 		"\t\t0x1e400000 - Preferred value for capturing essential "
 		"debug information (equivalent to old "
@@ -494,12 +496,20 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 		    (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
 
 		strcpy(str, "PCIe (");
-		if (lspeed == 1)
+		switch (lspeed) {
+		case 1:
 			strcat(str, "2.5GT/s ");
-		else if (lspeed == 2)
+			break;
+		case 2:
 			strcat(str, "5.0GT/s ");
-		else
+			break;
+		case 3:
+			strcat(str, "8.0GT/s ");
+			break;
+		default:
 			strcat(str, "<unknown> ");
+			break;
+		}
 		snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
 		strcat(str, lwstr);
 
@@ -719,7 +729,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 
 	rval = ha->isp_ops->start_scsi(sp);
 	if (rval != QLA_SUCCESS) {
-		ql_dbg(ql_dbg_io, vha, 0x3013,
+		ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
 		    "Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
 		goto qc24_host_busy_free_sp;
 	}
@@ -2357,7 +2367,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Configure PCI I/O space */
 	ret = ha->isp_ops->iospace_config(ha);
 	if (ret)
-		goto probe_hw_failed;
+		goto iospace_config_failed;
 
 	ql_log_pci(ql_log_info, pdev, 0x001d,
 	    "Found an ISP%04X irq %d iobase 0x%p.\n",
@@ -2668,7 +2678,11 @@ probe_hw_failed:
 		qla82xx_idc_lock(ha);
 		qla82xx_clear_drv_active(ha);
 		qla82xx_idc_unlock(ha);
-		iounmap((device_reg_t __iomem *)ha->nx_pcibase);
+	}
+iospace_config_failed:
+	if (IS_QLA82XX(ha)) {
+		if (!ha->nx_pcibase)
+			iounmap((device_reg_t __iomem *)ha->nx_pcibase);
 		if (!ql2xdbwr)
 			iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr);
 	} else {
@@ -2755,6 +2769,7 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	ha->flags.host_shutting_down = 1;
 
+	set_bit(UNLOADING, &base_vha->dpc_flags);
 	mutex_lock(&ha->vport_lock);
 	while (ha->cur_vport_count) {
 		struct Scsi_Host *scsi_host;
@@ -2784,8 +2799,6 @@ qla2x00_remove_one(struct pci_dev *pdev)
 			    "Error while clearing DRV-Presence.\n");
 	}
 
-	set_bit(UNLOADING, &base_vha->dpc_flags);
-
 	qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
 
 	qla2x00_dfs_remove(base_vha);
@@ -3721,10 +3734,9 @@ void qla2x00_relogin(struct scsi_qla_host *vha)
 						if (fcport->flags &
 						    FCF_FCP2_DEVICE)
 							opts |= BIT_1;
-							status2 =
-							    qla2x00_get_port_database(
-								vha, fcport,
-								opts);
+						status2 =
+						    qla2x00_get_port_database(
+							vha, fcport, opts);
 						if (status2 != QLA_SUCCESS)
 							status = 1;
 					}
@@ -3836,7 +3848,7 @@ qla83xx_idc_state_handler_work(struct work_struct *work)
 	qla83xx_idc_unlock(base_vha, 0);
 }
 
-int
+static int
 qla83xx_check_nic_core_fw_alive(scsi_qla_host_t *base_vha)
 {
 	int rval = QLA_SUCCESS;
@@ -3954,7 +3966,7 @@ qla83xx_wait_logic(void)
 	}
 }
 
-int
+static int
 qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha)
 {
 	int rval;
@@ -4013,7 +4025,7 @@ qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha)
 	return rval;
 }
 
-int
+static int
 qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha)
 {
 	int rval = QLA_SUCCESS;
@@ -4212,7 +4224,7 @@ qla83xx_clear_drv_presence(scsi_qla_host_t *vha)
 	return rval;
 }
 
-void
+static void
 qla83xx_need_reset_handler(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
@@ -4224,7 +4236,7 @@ qla83xx_need_reset_handler(scsi_qla_host_t *vha)
 	while (1) {
 		qla83xx_rd_reg(vha, QLA83XX_IDC_DRIVER_ACK, &drv_ack);
 		qla83xx_rd_reg(vha, QLA83XX_IDC_DRV_PRESENCE, &drv_presence);
-		if (drv_ack == drv_presence)
+		if ((drv_ack & drv_presence) == drv_presence)
 			break;
 
 		if (time_after_eq(jiffies, ack_timeout)) {
@@ -4251,7 +4263,7 @@ qla83xx_need_reset_handler(scsi_qla_host_t *vha)
 	ql_log(ql_log_info, vha, 0xb068, "HW State: COLD/RE-INIT.\n");
 }
 
-int
+static int
 qla83xx_device_bootstrap(scsi_qla_host_t *vha)
 {
 	int rval = QLA_SUCCESS;
@@ -4505,9 +4517,9 @@ qla2x00_do_dpc(void *data)
 			    "ISP abort end.\n");
 		}
 
-		if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
+		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
+		    &base_vha->dpc_flags)) {
 			qla2x00_update_fcports(base_vha);
-			clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
 		}
 
 		if (test_bit(SCR_PENDING, &base_vha->dpc_flags)) {
@@ -4987,7 +4999,8 @@ qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_RECOVERED;
 }
 
-uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha)
+static uint32_t
+qla82xx_error_recovery(scsi_qla_host_t *base_vha)
 {
 	uint32_t rval = QLA_FUNCTION_FAILED;
 	uint32_t drv_active = 0;
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index b49d217..ad1dc14b 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1029,7 +1029,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
 EXPORT_SYMBOL(qlt_stop_phase2);
 
 /* Called from qlt_remove_target() -> qla2x00_remove_one() */
-void qlt_release(struct qla_tgt *tgt)
+static void qlt_release(struct qla_tgt *tgt)
 {
 	struct qla_hw_data *ha = tgt->ha;
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index cfe934e..49697ca 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.04.00.07-k"
+#define QLA2XXX_VERSION      "8.04.00.08-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	4
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index dc0ad85..8f6b12c 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -16,16 +16,14 @@
 
 #include "scsi_priv.h"
 
-static int scsi_dev_type_suspend(struct device *dev, pm_message_t msg)
+static int scsi_dev_type_suspend(struct device *dev, int (*cb)(struct device *))
 {
-	struct device_driver *drv;
 	int err;
 
 	err = scsi_device_quiesce(to_scsi_device(dev));
 	if (err == 0) {
-		drv = dev->driver;
-		if (drv && drv->suspend) {
-			err = drv->suspend(dev, msg);
+		if (cb) {
+			err = cb(dev);
 			if (err)
 				scsi_device_resume(to_scsi_device(dev));
 		}
@@ -34,14 +32,12 @@ static int scsi_dev_type_suspend(struct device *dev, pm_message_t msg)
 	return err;
 }
 
-static int scsi_dev_type_resume(struct device *dev)
+static int scsi_dev_type_resume(struct device *dev, int (*cb)(struct device *))
 {
-	struct device_driver *drv;
 	int err = 0;
 
-	drv = dev->driver;
-	if (drv && drv->resume)
-		err = drv->resume(dev);
+	if (cb)
+		err = cb(dev);
 	scsi_device_resume(to_scsi_device(dev));
 	dev_dbg(dev, "scsi resume: %d\n", err);
 	return err;
@@ -49,51 +45,39 @@ static int scsi_dev_type_resume(struct device *dev)
 
 #ifdef CONFIG_PM_SLEEP
 
-static int scsi_bus_suspend_common(struct device *dev, pm_message_t msg)
+static int
+scsi_bus_suspend_common(struct device *dev, int (*cb)(struct device *))
 {
 	int err = 0;
 
 	if (scsi_is_sdev_device(dev)) {
 		/*
-		 * sd is the only high-level SCSI driver to implement runtime
-		 * PM, and sd treats runtime suspend, system suspend, and
-		 * system hibernate identically (but not system freeze).
+		 * All the high-level SCSI drivers that implement runtime
+		 * PM treat runtime suspend, system suspend, and system
+		 * hibernate identically.
 		 */
-		if (pm_runtime_suspended(dev)) {
-			if (msg.event == PM_EVENT_SUSPEND ||
-			    msg.event == PM_EVENT_HIBERNATE)
-				return 0;	/* already suspended */
+		if (pm_runtime_suspended(dev))
+			return 0;
 
-			/* wake up device so that FREEZE will succeed */
-			pm_runtime_resume(dev);
-		}
-		err = scsi_dev_type_suspend(dev, msg);
+		err = scsi_dev_type_suspend(dev, cb);
 	}
+
 	return err;
 }
 
-static int scsi_bus_resume_common(struct device *dev)
+static int
+scsi_bus_resume_common(struct device *dev, int (*cb)(struct device *))
 {
 	int err = 0;
 
-	/*
-	 * Parent device may have runtime suspended as soon as
-	 * it is woken up during the system resume.
-	 *
-	 * Resume it on behalf of child.
-	 */
-	pm_runtime_get_sync(dev->parent);
-
 	if (scsi_is_sdev_device(dev))
-		err = scsi_dev_type_resume(dev);
+		err = scsi_dev_type_resume(dev, cb);
+
 	if (err == 0) {
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
 	}
-
-	pm_runtime_put_sync(dev->parent);
-
 	return err;
 }
 
@@ -112,26 +96,49 @@ static int scsi_bus_prepare(struct device *dev)
 
 static int scsi_bus_suspend(struct device *dev)
 {
-	return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_suspend_common(dev, pm ? pm->suspend : NULL);
+}
+
+static int scsi_bus_resume(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_resume_common(dev, pm ? pm->resume : NULL);
 }
 
 static int scsi_bus_freeze(struct device *dev)
 {
-	return scsi_bus_suspend_common(dev, PMSG_FREEZE);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_suspend_common(dev, pm ? pm->freeze : NULL);
+}
+
+static int scsi_bus_thaw(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_resume_common(dev, pm ? pm->thaw : NULL);
 }
 
 static int scsi_bus_poweroff(struct device *dev)
 {
-	return scsi_bus_suspend_common(dev, PMSG_HIBERNATE);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_suspend_common(dev, pm ? pm->poweroff : NULL);
+}
+
+static int scsi_bus_restore(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	return scsi_bus_resume_common(dev, pm ? pm->restore : NULL);
 }
 
 #else /* CONFIG_PM_SLEEP */
 
-#define scsi_bus_resume_common		NULL
 #define scsi_bus_prepare		NULL
 #define scsi_bus_suspend		NULL
+#define scsi_bus_resume			NULL
 #define scsi_bus_freeze			NULL
+#define scsi_bus_thaw			NULL
 #define scsi_bus_poweroff		NULL
+#define scsi_bus_restore		NULL
 
 #endif /* CONFIG_PM_SLEEP */
 
@@ -140,10 +147,12 @@ static int scsi_bus_poweroff(struct device *dev)
 static int scsi_runtime_suspend(struct device *dev)
 {
 	int err = 0;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	dev_dbg(dev, "scsi_runtime_suspend\n");
 	if (scsi_is_sdev_device(dev)) {
-		err = scsi_dev_type_suspend(dev, PMSG_AUTO_SUSPEND);
+		err = scsi_dev_type_suspend(dev,
+				pm ? pm->runtime_suspend : NULL);
 		if (err == -EAGAIN)
 			pm_schedule_suspend(dev, jiffies_to_msecs(
 				round_jiffies_up_relative(HZ/10)));
@@ -157,10 +166,11 @@ static int scsi_runtime_suspend(struct device *dev)
 static int scsi_runtime_resume(struct device *dev)
 {
 	int err = 0;
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	dev_dbg(dev, "scsi_runtime_resume\n");
 	if (scsi_is_sdev_device(dev))
-		err = scsi_dev_type_resume(dev);
+		err = scsi_dev_type_resume(dev, pm ? pm->runtime_resume : NULL);
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
@@ -239,11 +249,11 @@ void scsi_autopm_put_host(struct Scsi_Host *shost)
 const struct dev_pm_ops scsi_bus_pm_ops = {
 	.prepare =		scsi_bus_prepare,
 	.suspend =		scsi_bus_suspend,
-	.resume =		scsi_bus_resume_common,
+	.resume =		scsi_bus_resume,
 	.freeze =		scsi_bus_freeze,
-	.thaw =			scsi_bus_resume_common,
+	.thaw =			scsi_bus_thaw,
 	.poweroff =		scsi_bus_poweroff,
-	.restore =		scsi_bus_resume_common,
+	.restore =		scsi_bus_restore,
 	.runtime_suspend =	scsi_runtime_suspend,
 	.runtime_resume =	scsi_runtime_resume,
 	.runtime_idle =		scsi_runtime_idle,
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index ce5224c..931a7d9 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -247,11 +247,11 @@ show_shost_active_mode(struct device *dev,
 
 static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
 
-static int check_reset_type(char *str)
+static int check_reset_type(const char *str)
 {
-	if (strncmp(str, "adapter", 10) == 0)
+	if (sysfs_streq(str, "adapter"))
 		return SCSI_ADAPTER_RESET;
-	else if (strncmp(str, "firmware", 10) == 0)
+	else if (sysfs_streq(str, "firmware"))
 		return SCSI_FIRMWARE_RESET;
 	else
 		return 0;
@@ -264,12 +264,9 @@ store_host_reset(struct device *dev, struct device_attribute *attr,
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct scsi_host_template *sht = shost->hostt;
 	int ret = -EINVAL;
-	char str[10];
 	int type;
 
-	sscanf(buf, "%s", str);
-	type = check_reset_type(str);
-
+	type = check_reset_type(buf);
 	if (!type)
 		goto exit_store_host_reset;
 
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index f7565fc..1b68142 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -151,6 +151,7 @@ static struct {
 	{ SAS_LINK_RATE_1_5_GBPS,	"1.5 Gbit" },
 	{ SAS_LINK_RATE_3_0_GBPS,	"3.0 Gbit" },
 	{ SAS_LINK_RATE_6_0_GBPS,	"6.0 Gbit" },
+	{ SAS_LINK_RATE_12_0_GBPS,	"12.0 Gbit" },
 };
 sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
 sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 352bc77..7992635 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -105,7 +105,7 @@ static void sd_unlock_native_capacity(struct gendisk *disk);
 static int  sd_probe(struct device *);
 static int  sd_remove(struct device *);
 static void sd_shutdown(struct device *);
-static int sd_suspend(struct device *, pm_message_t state);
+static int sd_suspend(struct device *);
 static int sd_resume(struct device *);
 static void sd_rescan(struct device *);
 static int sd_done(struct scsi_cmnd *);
@@ -465,15 +465,23 @@ static struct class sd_disk_class = {
 	.dev_attrs	= sd_disk_attrs,
 };
 
+static const struct dev_pm_ops sd_pm_ops = {
+	.suspend		= sd_suspend,
+	.resume			= sd_resume,
+	.poweroff		= sd_suspend,
+	.restore		= sd_resume,
+	.runtime_suspend	= sd_suspend,
+	.runtime_resume		= sd_resume,
+};
+
 static struct scsi_driver sd_template = {
 	.owner			= THIS_MODULE,
 	.gendrv = {
 		.name		= "sd",
 		.probe		= sd_probe,
 		.remove		= sd_remove,
-		.suspend	= sd_suspend,
-		.resume		= sd_resume,
 		.shutdown	= sd_shutdown,
+		.pm		= &sd_pm_ops,
 	},
 	.rescan			= sd_rescan,
 	.done			= sd_done,
@@ -1011,7 +1019,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
 		SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
 		SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
-	} else if (block > 0xffffffff) {
+	} else if (sdp->use_16_for_rw) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
 		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
@@ -2203,6 +2211,8 @@ got_data:
 		}
 	}
 
+	sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff);
+
 	/* Rescale capacity to 512-byte units */
 	if (sector_size == 4096)
 		sdkp->capacity <<= 3;
@@ -3052,7 +3062,7 @@ exit:
 	scsi_disk_put(sdkp);
 }
 
-static int sd_suspend(struct device *dev, pm_message_t mesg)
+static int sd_suspend(struct device *dev)
 {
 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
 	int ret = 0;
@@ -3067,7 +3077,7 @@ static int sd_suspend(struct device *dev, pm_message_t mesg)
 			goto done;
 	}
 
-	if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
+	if (sdkp->device->manage_start_stop) {
 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
 		ret = sd_start_stop_device(sdkp, 0);
 	}
@@ -3116,10 +3126,6 @@ static int __init init_sd(void)
 	if (err)
 		goto err_out;
 
-	err = scsi_register_driver(&sd_template.gendrv);
-	if (err)
-		goto err_out_class;
-
 	sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
 					 0, 0, NULL);
 	if (!sd_cdb_cache) {
@@ -3133,8 +3139,15 @@ static int __init init_sd(void)
 		goto err_out_cache;
 	}
 
+	err = scsi_register_driver(&sd_template.gendrv);
+	if (err)
+		goto err_out_driver;
+
 	return 0;
 
+err_out_driver:
+	mempool_destroy(sd_cdb_pool);
+
 err_out_cache:
 	kmem_cache_destroy(sd_cdb_cache);
 
@@ -3157,10 +3170,10 @@ static void __exit exit_sd(void)
 
 	SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
 
+	scsi_unregister_driver(&sd_template.gendrv);
 	mempool_destroy(sd_cdb_pool);
 	kmem_cache_destroy(sd_cdb_cache);
 
-	scsi_unregister_driver(&sd_template.gendrv);
 	class_unregister(&sd_disk_class);
 
 	for (i = 0; i < SD_MAJORS; i++)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 595af1a..dd8dc27 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -469,6 +469,8 @@ static int virtscsi_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
 			      sizeof cmd->req.cmd, sizeof cmd->resp.cmd,
 			      GFP_ATOMIC) >= 0)
 		ret = 0;
+	else
+		mempool_free(cmd, virtscsi_cmd_pool);
 
 out:
 	return ret;