tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

16 files changed, 22 insertions, 22 deletions

diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601..7cb5756 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host)
 	/* Go back and check they match */
 
 	outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL);	/* Reset program count 0 */
-	bios_addr -= 0x1000;	/* Reset the BIOS adddress      */
+	bios_addr -= 0x1000;	/* Reset the BIOS address */
 	for (i = 0, data32_ptr = (u8 *) & data32;	/* Check the code       */
 	     i < 0x1000;	/* Firmware code size = 4K      */
 	     i++, bios_addr++) {
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index afc9aeb..060ac4b 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev)
  *	aac_fib_setup	-	setup the fibs
  *	@dev: Adapter to set up
  *
- *	Allocate the PCI space for the fibs, map it and then intialise the
+ *	Allocate the PCI space for the fibs, map it and then initialise the
  *	fib area, the unmapped fib data and also the free list
  */
 
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 5997e7c..1565be9 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -1178,7 +1178,7 @@ notFound:
 /*
  * Retrieve an SCB by SCBID first searching the disconnected list falling
  * back to DMA'ing the SCB down from the host.  This routine assumes that
- * ARG_1 is the SCBID of interrest and that SINDEX is the position in the
+ * ARG_1 is the SCBID of interest and that SINDEX is the position in the
  * disconnected list to start the search from.  If SINDEX is SCB_LIST_NULL,
  * we go directly to the host for the SCB.
  */
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 28aaf34..40273a7 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1689,7 +1689,7 @@
 #define		PHY_START_CAL		0x01
 
 /*
- * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
  */
 #define PCIX_REG_BASE_ADR		0xB8040000
 
@@ -1802,7 +1802,7 @@
 #define PCIC_TP_CTRL	0xFC
 
 /*
- * EXSI Registers, Addresss Range: (0x00-0xFC)
+ * EXSI Registers, Address Range: (0x00-0xFC)
  */
 #define EXSI_REG_BASE_ADR		REG_BASE_ADDR_EXSI
 
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 7437461..390168f 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha,  int lseq)
 		int j;
 		/* Start from Page 1 of Mode 0 and 1. */
 		moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
-		/* All the fields of page 1 can be intialized to 0. */
+		/* All the fields of page 1 can be initialized to 0. */
 		for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
 			asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
 	}
@@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
 	asd_write_reg_dword(asd_ha, SCBPRO, 0);
 	asd_write_reg_dword(asd_ha, CSEQCON, 0);
 
-	/* Intialize CSEQ Mode 11 Interrupt Vectors.
+	/* Initialize CSEQ Mode 11 Interrupt Vectors.
 	 * The addresses are 16 bit wide and in dword units.
 	 * The values of their macros are in byte units.
 	 * Thus we have to divide by 4. */
@@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
 	asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
 
 	for (i = 0; i < 8; i++) {
-		/* Intialize Mode n Link m Interrupt Enable. */
+		/* Initialize Mode n Link m Interrupt Enable. */
 		asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
 		/* Initialize Mode n Request Mailbox. */
 		asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 33c8dd5..aabbf3d 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -2092,7 +2092,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 
 	case BFA_IOIM_SM_ABORT:
 		/**
-		 * IO is alraedy being cleaned up implicitly
+		 * IO is already being cleaned up implicitly
 		 */
 		ioim->io_cbfn = __bfa_cb_ioim_abort;
 		break;
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index b522bf3..b7aa23a 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
 	switch (status) {
 	case BFA_STATUS_OK:
 		/*
-		 * Initialiaze the V-Port fields
+		 * Initialize the V-Port fields
 		 */
 		__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
 		vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 54f50b0..31bbfb2 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
  * adapter_add_device - Adds the device instance to the adaptor instance.
  *
  * @acb: The adapter device to be updated
- * @dcb: A newly created and intialised device instance to add.
+ * @dcb: A newly created and initialised device instance to add.
  **/
 static void adapter_add_device(struct AdapterCtlBlk *acb,
 		struct DeviceCtlBlk *dcb)
@@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
  * init_adapter - Grab the resource for the card, setup the adapter
  * information, set the card into a known state, create the various
  * tables etc etc. This basically gets all adapter information all up
- * to date, intialised and gets the chip in sync with it.
+ * to date, initialised and gets the chip in sync with it.
  *
  * @host:	This hosts adapter structure
  * @io_port:	The base I/O port
@@ -4788,7 +4788,7 @@ static void banner_display(void)
  * that it finds in the system. The pci_dev strcuture indicates which
  * instance we are being called from.
  * 
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
  * @id: Looks like a pointer to the entry in our pci device table
  * that was actually matched by the PCI subsystem.
  *
@@ -4859,7 +4859,7 @@ fail:
  * dc395x_remove_one - Called to remove a single instance of the
  * adapter.
  *
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
  **/
 static void __devexit dc395x_remove_one(struct pci_dev *dev)
 {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index c797f6b..54a6ec8 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1212,7 +1212,7 @@ static void fc_lun_reset_send(unsigned long data)
 /**
  * fc_lun_reset() - Send a LUN RESET command to a device
  *		    and wait for the reply
- * @lport: The local port to sent the comand on
+ * @lport: The local port to sent the command on
  * @fsp:   The FCP packet that identifies the LUN to be reset
  * @id:	   The SCSI command ID
  * @lun:   The LUN ID to be reset
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f681eea..0e4abb9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_param_init - Intializes a cfg attribute
+ * lpfc_param_init - Initializes a cfg attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index a345dde..2a6866e 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2614,7 +2614,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 			if (unlikely(!fcf_record)) {
 				lpfc_printf_log(phba, KERN_ERR,
 					LOG_MBOX | LOG_SLI,
-					"2554 Could not allocate memmory for "
+					"2554 Could not allocate memory for "
 					"fcf record\n");
 				rc = -ENODEV;
 				goto out;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0d1e187..c5614cf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -9619,7 +9619,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id)
  * lpfc_sli4_queue_free - free a queue structure and associated memory
  * @queue: The queue structure to free.
  *
- * This function frees a queue structure and the DMAable memeory used for
+ * This function frees a queue structure and the DMAable memory used for
  * the host resident queue. This function must be called after destroying the
  * queue on the HBA.
  **/
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 2b4a048..deb24ad 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -13,7 +13,7 @@
  */
 
 /*
- * Comand coalescing - This feature allows the driver to be able to combine
+ * Command coalescing - This feature allows the driver to be able to combine
  * two or more commands and issue as one command in order to boost I/O
  * performance. Useful if the nature of the I/O is sequential. It is not very
  * useful for random natured I/Os.
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f8c86b2..b95285f3 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 #endif
 
 intx:
-	/* intialize the INT-X interrupt */
+	/* initialize the INT-X interrupt */
 	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
 		SHOST_TO_SAS_HA(pm8001_ha->shost));
 	return rc;
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index d53e650..a2ed201 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver);
 
 
 /**
- * scsi_netlink_init - Called by SCSI subsystem to intialize
+ * scsi_netlink_init - Called by SCSI subsystem to initialize
  * 	the SCSI transport netlink interface
  *
  **/
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8b955b5..4afa81a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
  *
  * This routine is similar to sym_set_workarounds(), except
  * that, at this point, we already know that the device was
- * successfully intialized at least once before, and so most
+ * successfully initialized at least once before, and so most
  * of the steps taken there are un-needed here.
  */
 static void sym2_reset_workarounds(struct pci_dev *pdev)