summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
authorJeff Skirvin <jeffrey.d.skirvin@intel.com>2011-10-27 15:05:16 -0700
committerJames Bottomley <JBottomley@Parallels.com>2011-10-31 13:17:48 +0400
commit98145cb722b51ccc3ba27166c9803545accba950 (patch)
tree714aaae27bd45da93793729f3321c6409aad45ae /drivers/scsi
parentdb49c2d037d50dfc67b29a4e013d6250ca97c3aa (diff)
downloadop-kernel-dev-98145cb722b51ccc3ba27166c9803545accba950.zip
op-kernel-dev-98145cb722b51ccc3ba27166c9803545accba950.tar.gz
[SCSI] isci: Fix task management for SMP, SATA and on dev remove.
libsas uses the LLDD abort task interface to handle I/O timeouts in the SATA/STP and SMP discovery paths, so this change will terminate STP/SMP requests. Also, if the device is gone, the lldd will prevent libsas from further escalations in the error handler. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/isci/remote_device.c47
-rw-r--r--drivers/scsi/isci/remote_device.h2
-rw-r--r--drivers/scsi/isci/task.c169
-rw-r--r--drivers/scsi/isci/task.h33
4 files changed, 67 insertions, 184 deletions
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index fbf9ce2..20c77ed 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1438,53 +1438,6 @@ int isci_remote_device_found(struct domain_device *domain_dev)
return status == SCI_SUCCESS ? 0 : -ENODEV;
}
-/**
- * isci_device_is_reset_pending() - This function will check if there is any
- * pending reset condition on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-bool isci_device_is_reset_pending(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device)
-{
- struct isci_request *isci_request;
- struct isci_request *tmp_req;
- bool reset_is_pending = false;
- unsigned long flags;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p\n", __func__, isci_device);
-
- spin_lock_irqsave(&isci_host->scic_lock, flags);
-
- /* Check for reset on all pending requests. */
- list_for_each_entry_safe(isci_request, tmp_req,
- &isci_device->reqs_in_process, dev_node) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p request = %p\n",
- __func__, isci_device, isci_request);
-
- if (isci_request->ttype == io_task) {
- struct sas_task *task = isci_request_access_task(
- isci_request);
-
- spin_lock(&task->task_state_lock);
- if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
- reset_is_pending = true;
- spin_unlock(&task->task_state_lock);
- }
- }
-
- spin_unlock_irqrestore(&isci_host->scic_lock, flags);
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p reset_is_pending = %d\n",
- __func__, isci_device, reset_is_pending);
-
- return reset_is_pending;
-}
/**
* isci_device_clear_reset_pending() - This function will clear if any pending
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index e1747ea..bee6dd2 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -132,8 +132,6 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost,
struct isci_remote_device *idev);
void isci_remote_device_gone(struct domain_device *domain_dev);
int isci_remote_device_found(struct domain_device *domain_dev);
-bool isci_device_is_reset_pending(struct isci_host *ihost,
- struct isci_remote_device *idev);
void isci_device_clear_reset_pending(struct isci_host *ihost,
struct isci_remote_device *idev);
/**
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index c1f439b..ec85beb1 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -920,22 +920,14 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun)
"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
__func__, domain_device, isci_host, isci_device);
- if (isci_device)
- set_bit(IDEV_EH, &isci_device->flags);
+ if (!isci_device) {
+ /* If the device is gone, stop the escalations. */
+ dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__);
- /* If there is a device reset pending on any request in the
- * device's list, fail this LUN reset request in order to
- * escalate to the device reset.
- */
- if (!isci_device ||
- isci_device_is_reset_pending(isci_host, isci_device)) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: No dev (%p), or "
- "RESET PENDING: domain_device=%p\n",
- __func__, isci_device, domain_device);
- ret = TMF_RESP_FUNC_FAILED;
+ ret = TMF_RESP_FUNC_COMPLETE;
goto out;
}
+ set_bit(IDEV_EH, &isci_device->flags);
/* Send the task management part of the reset. */
if (sas_protocol_ata(domain_device->tproto)) {
@@ -1044,7 +1036,7 @@ int isci_task_abort_task(struct sas_task *task)
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
- bool any_dev_reset = false;
+ int perform_termination = 0;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
@@ -1066,89 +1058,34 @@ int isci_task_abort_task(struct sas_task *task)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: task = %p\n", __func__, task);
-
- if (!isci_device || !old_request)
- goto out;
+ "%s: dev = %p, task = %p, old_request == %p\n",
+ __func__, isci_device, task, old_request);
- set_bit(IDEV_EH, &isci_device->flags);
-
- /* This version of the driver will fail abort requests for
- * SATA/STP. Failing the abort request this way will cause the
- * SCSI error handler thread to escalate to LUN reset
- */
- if (sas_protocol_ata(task->task_proto)) {
- dev_dbg(&isci_host->pdev->dev,
- " task %p is for a STP/SATA device;"
- " returning TMF_RESP_FUNC_FAILED\n"
- " to cause a LUN reset...\n", task);
- goto out;
- }
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: old_request == %p\n", __func__, old_request);
-
- any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
-
- spin_lock_irqsave(&task->task_state_lock, flags);
-
- any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
+ if (isci_device)
+ set_bit(IDEV_EH, &isci_device->flags);
- /* If the extraction of the request reference from the task
- * failed, then the request has been completed (or if there is a
- * pending reset then this abort request function must be failed
- * in order to escalate to the target reset).
+ /* Device reset conditions signalled in task_state_flags are the
+ * responsbility of libsas to observe at the start of the error
+ * handler thread.
*/
- if ((old_request == NULL) || any_dev_reset) {
-
- /* If the device reset task flag is set, fail the task
- * management request. Otherwise, the original request
- * has completed.
- */
- if (any_dev_reset) {
-
- /* Turn off the task's DONE to make sure this
- * task is escalated to a target reset.
- */
- task->task_state_flags &= ~SAS_TASK_STATE_DONE;
-
- /* Make the reset happen as soon as possible. */
- task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- /* Fail the task management request in order to
- * escalate to the target reset.
- */
- ret = TMF_RESP_FUNC_FAILED;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: Failing task abort in order to "
- "escalate to target reset because\n"
- "SAS_TASK_NEED_DEV_RESET is set for "
- "task %p on dev %p\n",
- __func__, task, isci_device);
-
-
- } else {
- /* The request has already completed and there
- * is nothing to do here other than to set the task
- * done bit, and indicate that the task abort function
- * was sucessful.
- */
- isci_set_task_doneflags(task);
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (!isci_device || !old_request) {
+ /* The request has already completed and there
+ * is nothing to do here other than to set the task
+ * done bit, and indicate that the task abort function
+ * was sucessful.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
- ret = TMF_RESP_FUNC_COMPLETE;
+ ret = TMF_RESP_FUNC_COMPLETE;
- dev_dbg(&isci_host->pdev->dev,
- "%s: abort task not needed for %p\n",
- __func__, task);
- }
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: abort task not needed for %p\n",
+ __func__, task);
goto out;
- } else {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
}
spin_lock_irqsave(&isci_host->scic_lock, flags);
@@ -1177,24 +1114,44 @@ int isci_task_abort_task(struct sas_task *task)
goto out;
}
if (task->task_proto == SAS_PROTOCOL_SMP ||
+ sas_protocol_ata(task->task_proto) ||
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: SMP request (%d)"
+ "%s: %s request"
" or complete_in_target (%d), thus no TMF\n",
- __func__, (task->task_proto == SAS_PROTOCOL_SMP),
+ __func__,
+ ((task->task_proto == SAS_PROTOCOL_SMP)
+ ? "SMP"
+ : (sas_protocol_ata(task->task_proto)
+ ? "SATA/STP"
+ : "<other>")
+ ),
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
- /* Set the state on the task. */
- isci_task_all_done(task);
-
- ret = TMF_RESP_FUNC_COMPLETE;
+ if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ } else {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ }
- /* Stopping and SMP devices are not sent a TMF, and are not
- * reset, but the outstanding I/O request is terminated below.
+ /* STP and SMP devices are not sent a TMF, but the
+ * outstanding I/O request is terminated below. This is
+ * because SATA/STP and SMP discovery path timeouts directly
+ * call the abort task interface for cleanup.
*/
+ perform_termination = 1;
+
} else {
/* Fill in the tmf stucture */
isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
@@ -1203,22 +1160,24 @@ int isci_task_abort_task(struct sas_task *task)
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
- #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
ISCI_ABORT_TASK_TIMEOUT_MS);
- if (ret != TMF_RESP_FUNC_COMPLETE)
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ perform_termination = 1;
+ else
dev_dbg(&isci_host->pdev->dev,
- "%s: isci_task_send_tmf failed\n",
- __func__);
+ "%s: isci_task_send_tmf failed\n", __func__);
}
- if (ret == TMF_RESP_FUNC_COMPLETE) {
+ if (perform_termination) {
set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
/* Clean up the request on our side, and wait for the aborted
* I/O to complete.
*/
- isci_terminate_request_core(isci_host, isci_device, old_request);
+ isci_terminate_request_core(isci_host, isci_device,
+ old_request);
}
/* Make sure we do not leave a reference to aborted_io_completion */
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index c9ccd0b..bc78c0a 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -226,35 +226,6 @@ enum isci_completion_selection {
isci_perform_error_io_completion /* Use sas_task_abort */
};
-static inline void isci_set_task_doneflags(
- struct sas_task *task)
-{
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- task->task_state_flags |= SAS_TASK_STATE_DONE;
- task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
- task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-}
-/**
- * isci_task_all_done() - This function clears the task bits to indicate the
- * LLDD is done with the task.
- *
- *
- */
-static inline void isci_task_all_done(
- struct sas_task *task)
-{
- unsigned long flags;
-
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- spin_lock_irqsave(&task->task_state_lock, flags);
- isci_set_task_doneflags(task);
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-}
-
/**
* isci_task_set_completion_status() - This function sets the completion status
* for the request.
@@ -336,7 +307,9 @@ isci_task_set_completion_status(
/* Fall through to the normal case... */
case isci_perform_normal_io_completion:
/* Normal notification (task_done) */
- isci_set_task_doneflags(task);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
break;
default:
WARN_ONCE(1, "unknown task_notification_selection: %d\n",
OpenPOWER on IntegriCloud