Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch is the usual mix of driver updates (srp, ipr, scsi_debug,
  NCR5380, fnic, 53c974, ses, wd719x, hpsa, megaraid_sas).

  Of those, wd7a9x is new and 53c974 is a rewrite of the old tmscsim
  driver and the extensive work by Finn Thain rewrites all the NCR5380
  based drivers.

  There's also extensive infrastructure updates: a new logging
  infrastructure for sense information and a rewrite of the tagged
  command queue API and an assortment of minor updates"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (183 commits)
  scsi: set fmt to NULL scsi_extd_sense_format() by default
  libsas: remove task_collector mode
  wd719x: remove dma_cache_sync call
  scsi_debug: add Report supported opcodes+tmfs; Compare and write
  scsi_debug: change SCSI command parser to table driven
  scsi_debug: add Capacity Changed Unit Attention
  scsi_debug: append inject error flags onto scsi_cmnd object
  scsi_debug: pinpoint invalid field in sense data
  wd719x: Add firmware documentation
  wd719x: Introduce Western Digital WD7193/7197/7296 PCI SCSI card driver
  eeprom-93cx6: Add (read-only) support for 8-bit mode
  esas2r: fix an oversight in setting return value
  esas2r: fix an error path in esas2r_ioctl_handler
  esas2r: fir error handling in do_fm_api
  scsi: add SPC-3 command definitions
  scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16
  scsi: remove scsi_driver owner field
  scsi: move scsi_dispatch_cmd to scsi_lib.c
  scsi: stop passing a gfp_mask argument down the command setup path
  scsi: remove scsi_next_command
  ...

1 files changed, 221 insertions, 291 deletions

diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 9707b74..2a906d1 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -20,89 +20,58 @@
  * Generic Generic NCR5380 driver
  *
  * Copyright 1995, Russell King
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
-
-/*
- * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
- *
- * Options :
- *
- * PARITY - enable parity checking.  Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing.  Untested.
- *
- * USLEEP - enable support for devices that don't disconnect.  Untested.
- */
-
-#define AUTOSENSE
-
 #include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
 #include <linux/delay.h>
-
 #include <linux/module.h>
-#include <linux/signal.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
-
-#include <asm/sun3ints.h>
 #include <asm/dvma.h>
-#include <asm/idprom.h>
-#include <asm/machines.h>
 
-/* dma on! */
-#define REAL_DMA
-
-#include "scsi.h"
 #include <scsi/scsi_host.h>
 #include "sun3_scsi.h"
-#include "NCR5380.h"
 
-extern int sun3_map_test(unsigned long, char *);
+/* Definitions for the core NCR5380 driver. */
 
-#define USE_WRAPPER
-/*#define RESET_BOOT */
-#define DRIVER_SETUP
+#define REAL_DMA
+/* #define SUPPORT_TAGS */
+/* minimum number of bytes to do dma on */
+#define DMA_MIN_SIZE                    129
 
-/*
- * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
- */
-#ifdef BUG
-#undef RESET_BOOT
-#undef DRIVER_SETUP
-#endif
+/* #define MAX_TAGS                     32 */
 
-/* #define SUPPORT_TAGS */
+#define NCR5380_implementation_fields   /* none */
 
-#ifdef SUN3_SCSI_VME
-#define ENABLE_IRQ()
-#else
-#define	ENABLE_IRQ()	enable_irq( IRQ_SUN3_SCSI ); 
-#endif
+#define NCR5380_read(reg)               sun3scsi_read(reg)
+#define NCR5380_write(reg, value)       sun3scsi_write(reg, value)
+
+#define NCR5380_queue_command           sun3scsi_queue_command
+#define NCR5380_bus_reset               sun3scsi_bus_reset
+#define NCR5380_abort                   sun3scsi_abort
+#define NCR5380_show_info               sun3scsi_show_info
+#define NCR5380_info                    sun3scsi_info
 
+#define NCR5380_dma_read_setup(instance, data, count) \
+        sun3scsi_dma_setup(data, count, 0)
+#define NCR5380_dma_write_setup(instance, data, count) \
+        sun3scsi_dma_setup(data, count, 1)
+#define NCR5380_dma_residual(instance) \
+        sun3scsi_dma_residual(instance)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
 
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
-static inline unsigned char sun3scsi_read(int reg);
-static inline void sun3scsi_write(int reg, int value);
+#define NCR5380_acquire_dma_irq(instance)    (1)
+#define NCR5380_release_dma_irq(instance)
+
+#include "NCR5380.h"
+
+
+extern int sun3_map_test(unsigned long, char *);
 
 static int setup_can_queue = -1;
 module_param(setup_can_queue, int, 0);
@@ -117,9 +86,7 @@ module_param(setup_use_tagged_queuing, int, 0);
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
 
-static struct scsi_cmnd *sun3_dma_setup_done = NULL;
-
-#define	RESET_RUN_DONE
+/* #define RESET_BOOT */
 
 #define	AFTER_RESET_DELAY	(HZ/2)
 
@@ -129,18 +96,15 @@ static struct scsi_cmnd *sun3_dma_setup_done = NULL;
 /* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
 #define SUN3_DVMA_BUFSIZE 0xe000
 
-/* minimum number of bytes to do dma on */
-#define SUN3_DMA_MINSIZE 128
-
-static volatile unsigned char *sun3_scsi_regp;
+static struct scsi_cmnd *sun3_dma_setup_done;
+static unsigned char *sun3_scsi_regp;
 static volatile struct sun3_dma_regs *dregs;
-#ifndef SUN3_SCSI_VME
-static struct sun3_udc_regs *udc_regs = NULL;
-#endif
+static struct sun3_udc_regs *udc_regs;
 static unsigned char *sun3_dma_orig_addr = NULL;
 static unsigned long sun3_dma_orig_count = 0;
 static int sun3_dma_active = 0;
 static unsigned long last_residual = 0;
+static struct Scsi_Host *default_instance;
 
 /*
  * NCR 5380 register access functions
@@ -148,12 +112,12 @@ static unsigned long last_residual = 0;
 
 static inline unsigned char sun3scsi_read(int reg)
 {
-	return( sun3_scsi_regp[reg] );
+	return in_8(sun3_scsi_regp + reg);
 }
 
 static inline void sun3scsi_write(int reg, int value)
 {
-	sun3_scsi_regp[reg] = value;
+	out_8(sun3_scsi_regp + reg, value);
 }
 
 #ifndef SUN3_SCSI_VME
@@ -180,213 +144,10 @@ static inline void sun3_udc_write(unsigned short val, unsigned char reg)
 }
 #endif
 
-/*
- * XXX: status debug
- */
-static struct Scsi_Host *default_instance;
-
-/*
- * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
- *
- * Purpose : initializes mac NCR5380 driver based on the
- *	command line / compile time port and irq definitions.
- *
- * Inputs : tpnt - template for this SCSI adapter.
- *
- * Returns : 1 if a host adapter was found, 0 if not.
- *
- */
- 
-static int __init sun3scsi_detect(struct scsi_host_template *tpnt)
-{
-	unsigned long ioaddr, irq;
-	static int called = 0;
-	struct Scsi_Host *instance;
-#ifdef SUN3_SCSI_VME
-	int i;
-	unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI,
-				   IOBASE_SUN3_VMESCSI + 0x4000,
-				   0 };
-	unsigned long vecs[3] = { SUN3_VEC_VMESCSI0,
-				  SUN3_VEC_VMESCSI1,
-				  0 };
-#endif
-
-	/* check that this machine has an onboard 5380 */
-	switch(idprom->id_machtype) {
-#ifdef SUN3_SCSI_VME
-	case SM_SUN3|SM_3_160:
-	case SM_SUN3|SM_3_260:
-		break;
-#else
-	case SM_SUN3|SM_3_50:
-	case SM_SUN3|SM_3_60:
-		break;
-#endif
-
-	default:
-		return 0;
-	}
-
-	if(called)
-		return 0;
-
-#ifdef SUN3_SCSI_VME
-	tpnt->proc_name = "Sun3 5380 VME SCSI";
-#else
-	tpnt->proc_name = "Sun3 5380 SCSI";
-#endif
-
-	/* setup variables */
-	tpnt->can_queue =
-		(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
-	tpnt->cmd_per_lun =
-		(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
-	tpnt->sg_tablesize = 
-		(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
-
-	if (setup_hostid >= 0)
-		tpnt->this_id = setup_hostid;
-	else {
-		/* use 7 as default */
-		tpnt->this_id = 7;
-	}
-
-#ifdef SUN3_SCSI_VME
-	ioaddr = 0;
-	for (i = 0; addrs[i] != 0; i++) {
-		unsigned char x;
-
-		ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE,
-						     SUN3_PAGE_TYPE_VME16);
-		irq = vecs[i];
-		sun3_scsi_regp = (unsigned char *)ioaddr;
-
-		dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
-
-		if (sun3_map_test((unsigned long)dregs, &x)) {
-			unsigned short oldcsr;
-
-			oldcsr = dregs->csr;
-			dregs->csr = 0;
-			udelay(SUN3_DMA_DELAY);
-			if (dregs->csr == 0x1400)
-				break;
-
-			dregs->csr = oldcsr;
-		}
-
-		iounmap((void *)ioaddr);
-		ioaddr = 0;
-	}
-
-	if (!ioaddr)
-		return 0;
-#else
-	irq = IRQ_SUN3_SCSI;
-	ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
-	sun3_scsi_regp = (unsigned char *)ioaddr;
-
-	dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
-
-	if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
-	   == NULL) {
-	     printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
-	     return 0;
-	}
-#endif
-#ifdef SUPPORT_TAGS
-	if (setup_use_tagged_queuing < 0)
-		setup_use_tagged_queuing = USE_TAGGED_QUEUING;
-#endif
-
-	instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
-	if(instance == NULL)
-		return 0;
-		
-	default_instance = instance;
-
-        instance->io_port = (unsigned long) ioaddr;
-	instance->irq = irq;
-
-	NCR5380_init(instance, 0);
-
-	instance->n_io_port = 32;
-
-        ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
-
-	if (request_irq(instance->irq, scsi_sun3_intr,
-			     0, "Sun3SCSI-5380", instance)) {
-#ifndef REAL_DMA
-		printk("scsi%d: IRQ%d not free, interrupts disabled\n",
-		       instance->host_no, instance->irq);
-		instance->irq = SCSI_IRQ_NONE;
-#else
-		printk("scsi%d: IRQ%d not free, bailing out\n",
-		       instance->host_no, instance->irq);
-		return 0;
-#endif
-	}
-	
-	pr_info("scsi%d: %s at port %lX irq", instance->host_no,
-		tpnt->proc_name, instance->io_port);
-	if (instance->irq == SCSI_IRQ_NONE)
-		printk ("s disabled");
-	else
-		printk (" %d", instance->irq);
-	printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
-	       instance->can_queue, instance->cmd_per_lun,
-	       SUN3SCSI_PUBLIC_RELEASE);
-	printk("\nscsi%d:", instance->host_no);
-	NCR5380_print_options(instance);
-	printk("\n");
-
-	dregs->csr = 0;
-	udelay(SUN3_DMA_DELAY);
-	dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
-	udelay(SUN3_DMA_DELAY);
-	dregs->fifo_count = 0;
-#ifdef SUN3_SCSI_VME
-	dregs->fifo_count_hi = 0;
-	dregs->dma_addr_hi = 0;
-	dregs->dma_addr_lo = 0;
-	dregs->dma_count_hi = 0;
-	dregs->dma_count_lo = 0;
-
-	dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
-#endif
-
-	called = 1;
-
-#ifdef RESET_BOOT
-	sun3_scsi_reset_boot(instance);
-#endif
-
-	return 1;
-}
-
-int sun3scsi_release (struct Scsi_Host *shpnt)
-{
-	if (shpnt->irq != SCSI_IRQ_NONE)
-		free_irq(shpnt->irq, shpnt);
-
-	iounmap((void *)sun3_scsi_regp);
-
-	NCR5380_exit(shpnt);
-	return 0;
-}
-
 #ifdef RESET_BOOT
-/*
- * Our 'bus reset on boot' function
- */
-
 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
 {
 	unsigned long end;
-
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
 	
 	/*
 	 * Do a SCSI reset to clean up the bus during initialization. No
@@ -422,11 +183,6 @@ static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
 }
 #endif
 
-static const char *sun3scsi_info(struct Scsi_Host *spnt)
-{
-    return "";
-}
-
 // safe bits for the CSR
 #define CSR_GOOD 0x060f
 
@@ -468,7 +224,6 @@ static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
 void sun3_sun3_debug (void)
 {
 	unsigned long flags;
-	NCR5380_local_declare();
 
 	if (default_instance) {
 			local_irq_save(flags);
@@ -732,25 +487,200 @@ static int sun3scsi_dma_finish(int write_flag)
 
 }
 	
-#include "sun3_NCR5380.c"
+#include "atari_NCR5380.c"
 
-static struct scsi_host_template driver_template = {
+#ifdef SUN3_SCSI_VME
+#define SUN3_SCSI_NAME          "Sun3 NCR5380 VME SCSI"
+#define DRV_MODULE_NAME         "sun3_scsi_vme"
+#else
+#define SUN3_SCSI_NAME          "Sun3 NCR5380 SCSI"
+#define DRV_MODULE_NAME         "sun3_scsi"
+#endif
+
+#define PFX                     DRV_MODULE_NAME ": "
+
+static struct scsi_host_template sun3_scsi_template = {
+	.module			= THIS_MODULE,
+	.proc_name		= DRV_MODULE_NAME,
 	.show_info		= sun3scsi_show_info,
 	.name			= SUN3_SCSI_NAME,
-	.detect			= sun3scsi_detect,
-	.release		= sun3scsi_release,
 	.info			= sun3scsi_info,
 	.queuecommand		= sun3scsi_queue_command,
 	.eh_abort_handler      	= sun3scsi_abort,
 	.eh_bus_reset_handler  	= sun3scsi_bus_reset,
-	.can_queue		= CAN_QUEUE,
+	.can_queue		= 16,
 	.this_id		= 7,
-	.sg_tablesize		= SG_TABLESIZE,
-	.cmd_per_lun		= CMD_PER_LUN,
+	.sg_tablesize		= SG_NONE,
+	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING
 };
 
+static int __init sun3_scsi_probe(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance;
+	int error;
+	struct resource *irq, *mem;
+	unsigned char *ioaddr;
+	int host_flags = 0;
+#ifdef SUN3_SCSI_VME
+	int i;
+#endif
+
+	if (setup_can_queue > 0)
+		sun3_scsi_template.can_queue = setup_can_queue;
+	if (setup_cmd_per_lun > 0)
+		sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+	if (setup_sg_tablesize >= 0)
+		sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
+	if (setup_hostid >= 0)
+		sun3_scsi_template.this_id = setup_hostid & 7;
+
+#ifdef SUN3_SCSI_VME
+	ioaddr = NULL;
+	for (i = 0; i < 2; i++) {
+		unsigned char x;
+
+		irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!irq || !mem)
+			break;
+
+		ioaddr = sun3_ioremap(mem->start, resource_size(mem),
+		                      SUN3_PAGE_TYPE_VME16);
+		dregs = (struct sun3_dma_regs *)(ioaddr + 8);
+
+		if (sun3_map_test((unsigned long)dregs, &x)) {
+			unsigned short oldcsr;
+
+			oldcsr = dregs->csr;
+			dregs->csr = 0;
+			udelay(SUN3_DMA_DELAY);
+			if (dregs->csr == 0x1400)
+				break;
+
+			dregs->csr = oldcsr;
+		}
+
+		iounmap(ioaddr);
+		ioaddr = NULL;
+	}
+	if (!ioaddr)
+		return -ENODEV;
+#else
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!irq || !mem)
+		return -ENODEV;
+
+	ioaddr = ioremap(mem->start, resource_size(mem));
+	dregs = (struct sun3_dma_regs *)(ioaddr + 8);
+
+	udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
+	if (!udc_regs) {
+		pr_err(PFX "couldn't allocate DVMA memory!\n");
+		iounmap(ioaddr);
+		return -ENOMEM;
+	}
+#endif
+
+	sun3_scsi_regp = ioaddr;
+
+	instance = scsi_host_alloc(&sun3_scsi_template,
+	                           sizeof(struct NCR5380_hostdata));
+	if (!instance) {
+		error = -ENOMEM;
+		goto fail_alloc;
+	}
+	default_instance = instance;
+
+	instance->io_port = (unsigned long)ioaddr;
+	instance->irq = irq->start;
+
+#ifdef SUPPORT_TAGS
+	host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
+#endif
+
+	NCR5380_init(instance, host_flags);
+
+	error = request_irq(instance->irq, scsi_sun3_intr, 0,
+	                    "NCR5380", instance);
+	if (error) {
+#ifdef REAL_DMA
+		pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
+		       instance->host_no, instance->irq);
+		goto fail_irq;
+#else
+		pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
+		        instance->host_no, instance->irq);
+		instance->irq = NO_IRQ;
+#endif
+	}
+
+	dregs->csr = 0;
+	udelay(SUN3_DMA_DELAY);
+	dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
+	udelay(SUN3_DMA_DELAY);
+	dregs->fifo_count = 0;
+#ifdef SUN3_SCSI_VME
+	dregs->fifo_count_hi = 0;
+	dregs->dma_addr_hi = 0;
+	dregs->dma_addr_lo = 0;
+	dregs->dma_count_hi = 0;
+	dregs->dma_count_lo = 0;
+
+	dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
+#endif
+
+#ifdef RESET_BOOT
+	sun3_scsi_reset_boot(instance);
+#endif
+
+	error = scsi_add_host(instance, NULL);
+	if (error)
+		goto fail_host;
+
+	platform_set_drvdata(pdev, instance);
+
+	scsi_scan_host(instance);
+	return 0;
+
+fail_host:
+	if (instance->irq != NO_IRQ)
+		free_irq(instance->irq, instance);
+fail_irq:
+	NCR5380_exit(instance);
+	scsi_host_put(instance);
+fail_alloc:
+	if (udc_regs)
+		dvma_free(udc_regs);
+	iounmap(sun3_scsi_regp);
+	return error;
+}
+
+static int __exit sun3_scsi_remove(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+	scsi_remove_host(instance);
+	if (instance->irq != NO_IRQ)
+		free_irq(instance->irq, instance);
+	NCR5380_exit(instance);
+	scsi_host_put(instance);
+	if (udc_regs)
+		dvma_free(udc_regs);
+	iounmap(sun3_scsi_regp);
+	return 0;
+}
+
+static struct platform_driver sun3_scsi_driver = {
+	.remove = __exit_p(sun3_scsi_remove),
+	.driver = {
+		.name	= DRV_MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
 
-#include "scsi_module.c"
+module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
 
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
 MODULE_LICENSE("GPL");