Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...

1 files changed, 66 insertions, 5 deletions

diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index cf19451..d1d1420 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -789,14 +789,23 @@ struct device_reg_24xx {
 #define FA_RISC_CODE_ADDR	0x20000
 #define FA_RISC_CODE_SEGMENTS	2
 
+#define FA_FLASH_DESCR_ADDR_24	0x11000
+#define FA_FLASH_LAYOUT_ADDR_24	0x11400
+#define FA_NPIV_CONF0_ADDR_24	0x16000
+#define FA_NPIV_CONF1_ADDR_24	0x17000
+
 #define FA_FW_AREA_ADDR		0x40000
 #define FA_VPD_NVRAM_ADDR	0x48000
 #define FA_FEATURE_ADDR		0x4C000
 #define FA_FLASH_DESCR_ADDR	0x50000
+#define FA_FLASH_LAYOUT_ADDR	0x50400
 #define FA_HW_EVENT0_ADDR	0x54000
-#define FA_HW_EVENT1_ADDR	0x54200
+#define FA_HW_EVENT1_ADDR	0x54400
 #define FA_HW_EVENT_SIZE	0x200
 #define FA_HW_EVENT_ENTRY_SIZE	4
+#define FA_NPIV_CONF0_ADDR	0x5C000
+#define FA_NPIV_CONF1_ADDR	0x5D000
+
 /*
  * Flash Error Log Event Codes.
  */
@@ -806,10 +815,6 @@ struct device_reg_24xx {
 #define HW_EVENT_NVRAM_CHKSUM_ERR	0xF023
 #define HW_EVENT_FLASH_FW_ERR	0xF024
 
-#define FA_BOOT_LOG_ADDR	0x58000
-#define FA_FW_DUMP0_ADDR	0x60000
-#define FA_FW_DUMP1_ADDR	0x70000
-
 	uint32_t flash_data;		/* Flash/NVRAM BIOS data. */
 
 	uint32_t ctrl_status;		/* Control/Status. */
@@ -1203,6 +1208,62 @@ struct qla_fdt_layout {
 	uint8_t unused2[65];
 };
 
+/* Flash Layout Table ********************************************************/
+
+struct qla_flt_location {
+	uint8_t sig[4];
+	uint32_t start_lo;
+	uint32_t start_hi;
+	uint16_t unused;
+	uint16_t checksum;
+};
+
+struct qla_flt_header {
+	uint16_t version;
+	uint16_t length;
+	uint16_t checksum;
+	uint16_t unused;
+};
+
+#define FLT_REG_FW		0x01
+#define FLT_REG_BOOT_CODE	0x07
+#define FLT_REG_VPD_0		0x14
+#define FLT_REG_NVRAM_0		0x15
+#define FLT_REG_VPD_1		0x16
+#define FLT_REG_NVRAM_1		0x17
+#define FLT_REG_FDT		0x1a
+#define FLT_REG_FLT		0x1c
+#define FLT_REG_HW_EVENT_0	0x1d
+#define FLT_REG_HW_EVENT_1	0x1f
+#define FLT_REG_NPIV_CONF_0	0x29
+#define FLT_REG_NPIV_CONF_1	0x2a
+
+struct qla_flt_region {
+	uint32_t code;
+	uint32_t size;
+	uint32_t start;
+	uint32_t end;
+};
+
+/* Flash NPIV Configuration Table ********************************************/
+
+struct qla_npiv_header {
+	uint8_t sig[2];
+	uint16_t version;
+	uint16_t entries;
+	uint16_t unused[4];
+	uint16_t checksum;
+};
+
+struct qla_npiv_entry {
+	uint16_t flags;
+	uint16_t vf_id;
+	uint16_t qos;
+	uint16_t unused1;
+	uint8_t port_name[WWN_SIZE];
+	uint8_t node_name[WWN_SIZE];
+};
+
 /* 84XX Support **************************************************************/
 
 #define MBA_ISP84XX_ALERT	0x800f  /* Alert Notification. */