diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 16:23:44 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 16:23:44 -0800 |
commit | 670ffccb2f9183eb6cb32fe92257aea52b3f8a7d (patch) | |
tree | 54962412913a69e17cc680c57f3e26f7305d99d2 /drivers/scsi/pm8001/pm8001_init.c | |
parent | 47f521ba18190e4bfbb65ead3977af5756884427 (diff) | |
parent | 341b2aa83368e6f23bf0cc3d04604896337ad7cb (diff) | |
download | op-kernel-dev-670ffccb2f9183eb6cb32fe92257aea52b3f8a7d.zip op-kernel-dev-670ffccb2f9183eb6cb32fe92257aea52b3f8a7d.tar.gz |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_init.c')
-rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 0e013f7..7a697ca 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -132,7 +132,7 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) sas_phy->oob_mode = OOB_NOT_CONNECTED; sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN; sas_phy->id = phy_id; - sas_phy->sas_addr = &pm8001_ha->sas_addr[0]; + sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr; sas_phy->frame_rcvd = &phy->frame_rcvd[0]; sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata; sas_phy->lldd_phy = phy; @@ -591,10 +591,12 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, for (i = 0; i < chip_info->n_phy; i++) { sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy; sha->sas_port[i] = &pm8001_ha->port[i].sas_port; + sha->sas_phy[i]->sas_addr = + (u8 *)&pm8001_ha->phy[i].dev_sas_addr; } sha->sas_ha_name = DRV_NAME; sha->dev = pm8001_ha->dev; - + sha->strict_wide_ports = 1; sha->lldd_module = THIS_MODULE; sha->sas_addr = &pm8001_ha->sas_addr[0]; sha->num_phys = chip_info->n_phy; @@ -611,6 +613,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) { u8 i, j; + u8 sas_add[8]; #ifdef PM8001_READ_VPD /* For new SPC controllers WWN is stored in flash vpd * For SPC/SPCve controllers WWN is stored in EEPROM @@ -672,10 +675,12 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) pm8001_ha->sas_addr[j] = payload.func_specific[0x804 + i]; } - + memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE); for (i = 0; i < pm8001_ha->chip->n_phy; i++) { + if (i && ((i % 4) == 0)) + sas_add[7] = sas_add[7] + 4; memcpy(&pm8001_ha->phy[i].dev_sas_addr, - pm8001_ha->sas_addr, SAS_ADDR_SIZE); + sas_add, SAS_ADDR_SIZE); PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy %d sas_addr = %016llx\n", i, pm8001_ha->phy[i].dev_sas_addr)); |