summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pcmcia
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-07-29 15:50:55 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-09-29 17:20:21 +0200
commite8405f0f617856de0ceb7d04e65b663051451544 (patch)
tree06e9cd27419a40587bcec19b71010e52b7dfcba4 /drivers/scsi/pcmcia
parentfb49fa533f9d211994c33efb752ffa5b30033729 (diff)
downloadop-kernel-dev-e8405f0f617856de0ceb7d04e65b663051451544.zip
op-kernel-dev-e8405f0f617856de0ceb7d04e65b663051451544.tar.gz
pcmcia: move Vpp setup to struct pcmcia_device
Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/scsi/pcmcia')
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c8
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index e872e06..50574e8 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1624,10 +1624,10 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- p_dev->conf.Vpp =
+ p_dev->vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
} else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- p_dev->conf.Vpp =
+ p_dev->vpp =
dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
}
@@ -1749,8 +1749,8 @@ static int nsp_cs_config(struct pcmcia_device *link)
/* Finally, report what we've done */
printk(KERN_INFO "nsp_cs: index 0x%02x: ",
link->conf.ConfigIndex);
- if (link->conf.Vpp) {
- printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
+ if (link->vpp) {
+ printk(", Vpp %d.%d", link->vpp/10, link->vpp%10);
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
printk(", irq %d", link->irq);
OpenPOWER on IntegriCloud