mpt3sas: Added Reply Descriptor Post Queue (RDPQ) Array support

Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.

When firmware receives this address, it will program each of the
Reply Descriptor Post Queue registers, as each reply queue has its
own register. Thus the firmware, starting from a base address it
determines the starting address of the subsequent reply queues
through some simple arithmetic calculations.

The size of this contiguous block of memory pool is directly proportional
to number of MSI-X vectors and the HBA queue depth. For example higher
MSIX vectors requires larger contiguous block of memory pool.

But some of the OS kernels are unable to allocate this larger
contiguous block of memory pool.

So, the proposal is to allocate memory independently for each
Reply Queue and pass down all of the addresses to the firmware.
Then the firmware will just take each address and program the value
into the correct register.

When HBAs with older firmware(i.e. without RDPQ capability) is used
with this new driver then the max_msix_vectors value would be set
to 8 by default.

Change set in v1:

1. Declared the _base_get_ioc_facts() functions at the beginning of the mpt3sas_base.c file
instead of moving all these functions before mpt3sas_base_map_resources() function
        a. _base_wait_for_doorbell_int()
        b. _base_wait_for_doorbell_ack()
        c. _base_wait_for_doorbell_not_used()
        d. _base_handshake_req_reply_wait()
        e. _base_get_ioc_facts()

2. Initially set the consistent DMA mask to 32 bit and then change it to 64 bit mask
after allocating RDPQ pools by calling the function _base_change_consistent_dma_mask.
This is to ensure that all the upper 32 bits of RDPQ entries's base address to be same.

3. Reduced the redundancy between the RDPQ and non-RDPQ support in these following functions
        a. _base_release_memory_pools()
        b. _base_allocate_memory_pools()
        c. _base_send_ioc_init()
        d. _base_make_ioc_operational()

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

2 files changed, 191 insertions, 61 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index e94993e..1560115 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -91,6 +91,8 @@ static int mpt3sas_fwfault_debug;
 MODULE_PARM_DESC(mpt3sas_fwfault_debug,
 	" enable detection of firmware fault and halt firmware - (default=0)");
 
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
 
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
@@ -1482,17 +1484,22 @@ static int
 _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 {
 	struct sysinfo s;
-	char *desc = NULL;
+	u64 consistent_dma_mask;
+
+	if (ioc->dma_mask)
+		consistent_dma_mask = DMA_BIT_MASK(64);
+	else
+		consistent_dma_mask = DMA_BIT_MASK(32);
 
 	if (sizeof(dma_addr_t) > 4) {
 		const uint64_t required_mask =
 		    dma_get_required_mask(&pdev->dev);
 		if ((required_mask > DMA_BIT_MASK(32)) &&
 		    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
-		    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		    !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
 			ioc->base_add_sg_single = &_base_add_sg_single_64;
 			ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-			desc = "64";
+			ioc->dma_mask = 64;
 			goto out;
 		}
 	}
@@ -1501,16 +1508,27 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		ioc->base_add_sg_single = &_base_add_sg_single_32;
 		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
-		desc = "32";
+		ioc->dma_mask = 32;
 	} else
 		return -ENODEV;
 
  out:
 	si_meminfo(&s);
 	pr_info(MPT3SAS_FMT
-		"%s BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
-		ioc->name, desc, convert_to_kb(s.totalram));
+		"%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+		ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));
+
+	return 0;
+}
 
+static int
+_base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
+				      struct pci_dev *pdev)
+{
+	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+			return -ENODEV;
+	}
 	return 0;
 }
 
@@ -1698,11 +1716,15 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 	  ": %d, max_msix_vectors: %d\n", ioc->name, ioc->msix_vector_count,
 	  ioc->cpu_count, max_msix_vectors);
 
+	if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+		max_msix_vectors = 8;
+
 	if (max_msix_vectors > 0) {
 		ioc->reply_queue_count = min_t(int, max_msix_vectors,
 			ioc->reply_queue_count);
 		ioc->msix_vector_count = ioc->reply_queue_count;
-	}
+	} else if (max_msix_vectors == 0)
+		goto try_ioapic;
 
 	entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
 	    GFP_KERNEL);
@@ -1742,6 +1764,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 /* failback to io_apic interrupt routing */
  try_ioapic:
 
+	ioc->reply_queue_count = 1;
 	r = _base_request_irq(ioc, 0, ioc->pdev->irq);
 
 	return r;
@@ -1821,6 +1844,16 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	_base_mask_interrupts(ioc);
+
+	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	if (r)
+		goto out_fail;
+
+	if (!ioc->rdpq_array_enable_assigned) {
+		ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+		ioc->rdpq_array_enable_assigned = 1;
+	}
+
 	r = _base_enable_msix(ioc);
 	if (r)
 		goto out_fail;
@@ -2496,7 +2529,8 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 static void
 _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 {
-	int i;
+	int i = 0;
+	struct reply_post_struct *rps;
 
 	dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -2541,15 +2575,25 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 		ioc->reply_free = NULL;
 	}
 
-	if (ioc->reply_post_free) {
-		pci_pool_free(ioc->reply_post_free_dma_pool,
-		    ioc->reply_post_free, ioc->reply_post_free_dma);
+	if (ioc->reply_post) {
+		do {
+			rps = &ioc->reply_post[i];
+			if (rps->reply_post_free) {
+				pci_pool_free(
+				    ioc->reply_post_free_dma_pool,
+				    rps->reply_post_free,
+				    rps->reply_post_free_dma);
+				dexitprintk(ioc, pr_info(MPT3SAS_FMT
+				    "reply_post_free_pool(0x%p): free\n",
+				    ioc->name, rps->reply_post_free));
+				rps->reply_post_free = NULL;
+			}
+		} while (ioc->rdpq_array_enable &&
+			   (++i < ioc->reply_queue_count));
+
 		if (ioc->reply_post_free_dma_pool)
 			pci_pool_destroy(ioc->reply_post_free_dma_pool);
-		dexitprintk(ioc, pr_info(MPT3SAS_FMT
-		    "reply_post_free_pool(0x%p): free\n", ioc->name,
-		    ioc->reply_post_free));
-		ioc->reply_post_free = NULL;
+		kfree(ioc->reply_post);
 	}
 
 	if (ioc->config_page) {
@@ -2696,6 +2740,65 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
 	    ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
 	    ioc->chains_needed_per_io));
 
+	/* reply post queue, 16 byte align */
+	reply_post_free_sz = ioc->reply_post_queue_depth *
+	    sizeof(Mpi2DefaultReplyDescriptor_t);
+
+	sz = reply_post_free_sz;
+	if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
+		sz *= ioc->reply_queue_count;
+
+	ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
+	    (ioc->reply_queue_count):1,
+	    sizeof(struct reply_post_struct), GFP_KERNEL);
+
+	if (!ioc->reply_post) {
+		pr_err(MPT3SAS_FMT "reply_post_free pool: kcalloc failed\n",
+			ioc->name);
+		goto out;
+	}
+	ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
+	    ioc->pdev, sz, 16, 0);
+	if (!ioc->reply_post_free_dma_pool) {
+		pr_err(MPT3SAS_FMT
+		 "reply_post_free pool: pci_pool_create failed\n",
+		 ioc->name);
+		goto out;
+	}
+	i = 0;
+	do {
+		ioc->reply_post[i].reply_post_free =
+		    pci_pool_alloc(ioc->reply_post_free_dma_pool,
+		    GFP_KERNEL,
+		    &ioc->reply_post[i].reply_post_free_dma);
+		if (!ioc->reply_post[i].reply_post_free) {
+			pr_err(MPT3SAS_FMT
+			"reply_post_free pool: pci_pool_alloc failed\n",
+			ioc->name);
+			goto out;
+		}
+		memset(ioc->reply_post[i].reply_post_free, 0, sz);
+		dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		    "reply post free pool (0x%p): depth(%d),"
+		    "element_size(%d), pool_size(%d kB)\n", ioc->name,
+		    ioc->reply_post[i].reply_post_free,
+		    ioc->reply_post_queue_depth, 8, sz/1024));
+		dinitprintk(ioc, pr_info(MPT3SAS_FMT
+		    "reply_post_free_dma = (0x%llx)\n", ioc->name,
+		    (unsigned long long)
+		    ioc->reply_post[i].reply_post_free_dma));
+		total_sz += sz;
+	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
+
+	if (ioc->dma_mask == 64) {
+		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
+			pr_warn(MPT3SAS_FMT
+			    "no suitable consistent DMA mask for %s\n",
+			    ioc->name, pci_name(ioc->pdev));
+			goto out;
+		}
+	}
+
 	ioc->scsiio_depth = ioc->hba_queue_depth -
 	    ioc->hi_priority_depth - ioc->internal_depth;
 
@@ -2910,40 +3013,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
 		ioc->name, (unsigned long long)ioc->reply_free_dma));
 	total_sz += sz;
 
-	/* reply post queue, 16 byte align */
-	reply_post_free_sz = ioc->reply_post_queue_depth *
-	    sizeof(Mpi2DefaultReplyDescriptor_t);
-	if (_base_is_controller_msix_enabled(ioc))
-		sz = reply_post_free_sz * ioc->reply_queue_count;
-	else
-		sz = reply_post_free_sz;
-	ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
-	    ioc->pdev, sz, 16, 0);
-	if (!ioc->reply_post_free_dma_pool) {
-		pr_err(MPT3SAS_FMT
-			"reply_post_free pool: pci_pool_create failed\n",
-			ioc->name);
-		goto out;
-	}
-	ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
-	    GFP_KERNEL, &ioc->reply_post_free_dma);
-	if (!ioc->reply_post_free) {
-		pr_err(MPT3SAS_FMT
-			"reply_post_free pool: pci_pool_alloc failed\n",
-			ioc->name);
-		goto out;
-	}
-	memset(ioc->reply_post_free, 0, sz);
-	dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply post free pool" \
-	    "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
-	    ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
-	    sz/1024));
-	dinitprintk(ioc, pr_info(MPT3SAS_FMT
-		"reply_post_free_dma = (0x%llx)\n",
-		ioc->name, (unsigned long long)
-	    ioc->reply_post_free_dma));
-	total_sz += sz;
-
 	ioc->config_page_sz = 512;
 	ioc->config_page = pci_alloc_consistent(ioc->pdev,
 	    ioc->config_page_sz, &ioc->config_page_dma);
@@ -3626,6 +3695,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
 	if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
 		ioc->ir_firmware = 1;
+	if ((facts->IOCCapabilities &
+	      MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
+		ioc->rdpq_array_capable = 1;
 	facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
 	facts->IOCRequestFrameSize =
 	    le16_to_cpu(mpi_reply.IOCRequestFrameSize);
@@ -3662,9 +3734,12 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2IOCInitRequest_t mpi_request;
 	Mpi2IOCInitReply_t mpi_reply;
-	int r;
+	int i, r = 0;
 	struct timeval current_time;
 	u16 ioc_status;
+	u32 reply_post_free_array_sz = 0;
+	Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
+	dma_addr_t reply_post_free_array_dma;
 
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -3693,9 +3768,31 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	    cpu_to_le64((u64)ioc->request_dma);
 	mpi_request.ReplyFreeQueueAddress =
 	    cpu_to_le64((u64)ioc->reply_free_dma);
-	mpi_request.ReplyDescriptorPostQueueAddress =
-	    cpu_to_le64((u64)ioc->reply_post_free_dma);
 
+	if (ioc->rdpq_array_enable) {
+		reply_post_free_array_sz = ioc->reply_queue_count *
+		    sizeof(Mpi2IOCInitRDPQArrayEntry);
+		reply_post_free_array = pci_alloc_consistent(ioc->pdev,
+			reply_post_free_array_sz, &reply_post_free_array_dma);
+		if (!reply_post_free_array) {
+			pr_err(MPT3SAS_FMT
+			"reply_post_free_array: pci_alloc_consistent failed\n",
+			ioc->name);
+			r = -ENOMEM;
+			goto out;
+		}
+		memset(reply_post_free_array, 0, reply_post_free_array_sz);
+		for (i = 0; i < ioc->reply_queue_count; i++)
+			reply_post_free_array[i].RDPQBaseAddress =
+			    cpu_to_le64(
+				(u64)ioc->reply_post[i].reply_post_free_dma);
+		mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+		mpi_request.ReplyDescriptorPostQueueAddress =
+		    cpu_to_le64((u64)reply_post_free_array_dma);
+	} else {
+		mpi_request.ReplyDescriptorPostQueueAddress =
+		    cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+	}
 
 	/* This time stamp specifies number of milliseconds
 	 * since epoch ~ midnight January 1, 1970.
@@ -3723,7 +3820,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
 		    ioc->name, __func__, r);
-		return r;
+		goto out;
 	}
 
 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
@@ -3733,7 +3830,12 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		r = -EIO;
 	}
 
-	return 0;
+out:
+	if (reply_post_free_array)
+		pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
+				    reply_post_free_array,
+				    reply_post_free_array_dma);
+	return r;
 }
 
 /**
@@ -4283,7 +4385,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	struct _tr_list *delayed_tr, *delayed_tr_next;
 	struct adapter_reply_queue *reply_q;
 	long reply_post_free;
-	u32 reply_post_free_sz;
+	u32 reply_post_free_sz, index = 0;
 
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -4354,9 +4456,9 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		_base_assign_reply_queues(ioc);
 
 	/* initialize Reply Post Free Queue */
-	reply_post_free = (long)ioc->reply_post_free;
 	reply_post_free_sz = ioc->reply_post_queue_depth *
 	    sizeof(Mpi2DefaultReplyDescriptor_t);
+	reply_post_free = (long)ioc->reply_post[index].reply_post_free;
 	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
 		reply_q->reply_post_host_index = 0;
 		reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
@@ -4366,7 +4468,15 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 			    cpu_to_le64(ULLONG_MAX);
 		if (!_base_is_controller_msix_enabled(ioc))
 			goto skip_init_reply_post_free_queue;
-		reply_post_free += reply_post_free_sz;
+		/*
+		 * If RDPQ is enabled, switch to the next allocation.
+		 * Otherwise advance within the contiguous region.
+		 */
+		if (ioc->rdpq_array_enable)
+			reply_post_free = (long)
+			    ioc->reply_post[++index].reply_post_free;
+		else
+			reply_post_free += reply_post_free_sz;
 	}
  skip_init_reply_post_free_queue:
 
@@ -4477,6 +4587,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 		goto out_free_resources;
 	}
 
+	ioc->rdpq_array_enable_assigned = 0;
+	ioc->dma_mask = 0;
 	r = mpt3sas_base_map_resources(ioc);
 	if (r)
 		goto out_free_resources;
@@ -4853,6 +4965,12 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
 	if (r)
 		goto out;
+
+	if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+		panic("%s: Issue occurred with flashing controller firmware."
+		      "Please reboot the system and ensure that the correct"
+		      " firmware version is running\n", ioc->name);
+
 	r = _base_make_ioc_operational(ioc, sleep_flag);
 	if (!r)
 		_base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index e920728..ca4a7cc 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -569,6 +569,11 @@ struct mpt3sas_port_facts {
 	u16			MaxPostedCmdBuffers;
 };
 
+struct reply_post_struct {
+	Mpi2ReplyDescriptorsUnion_t	*reply_post_free;
+	dma_addr_t			reply_post_free_dma;
+};
+
 /**
  * enum mutex_type - task management mutex type
  * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
@@ -597,6 +602,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @ir_firmware: IR firmware present
  * @bars: bitmask of BAR's that must be configured
  * @mask_interrupts: ignore interrupt
+ * @dma_mask: used to set the consistent dma mask
  * @fault_reset_work_q_name: fw fault work queue
  * @fault_reset_work_q: ""
  * @fault_reset_work: ""
@@ -712,8 +718,11 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @reply_free_dma_pool:
  * @reply_free_host_index: tail index in pool to insert free replys
  * @reply_post_queue_depth: reply post queue depth
- * @reply_post_free: pool for reply post (64bit descriptor)
- * @reply_post_free_dma:
+ * @reply_post_struct: struct for reply_post_free physical & virt address
+ * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
+ * @rdpq_array_enable: rdpq_array support is enabled in the driver
+ * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
+ *				is assigned only ones
  * @reply_queue_count: number of reply queue's
  * @reply_queue_list: link list contaning the reply queue info
  * @reply_post_host_index: head index in the pool where FW completes IO
@@ -735,6 +744,7 @@ struct MPT3SAS_ADAPTER {
 	u8		ir_firmware;
 	int		bars;
 	u8		mask_interrupts;
+	int		dma_mask;
 
 	/* fw fault handler */
 	char		fault_reset_work_q_name[20];
@@ -914,8 +924,10 @@ struct MPT3SAS_ADAPTER {
 
 	/* reply post queue */
 	u16		reply_post_queue_depth;
-	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
-	dma_addr_t	reply_post_free_dma;
+	struct reply_post_struct *reply_post;
+	u8		rdpq_array_capable;
+	u8		rdpq_array_enable;
+	u8		rdpq_array_enable_assigned;
 	struct dma_pool *reply_post_free_dma_pool;
 	u8		reply_queue_count;
 	struct list_head reply_queue_list;