Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...

6 files changed, 222 insertions, 314 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 750f82c..a1a5ceb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(mpt3sas_fwfault_debug,
 	" enable detection of firmware fault and halt firmware - (default=0)");
 
 static int
-_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc);
 
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
@@ -218,8 +218,7 @@ _base_fault_reset_work(struct work_struct *work)
 	ioc->non_operational_loop = 0;
 
 	if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name,
 		    __func__, (rc == 0) ? "success" : "failed");
 		doorbell = mpt3sas_base_get_iocstate(ioc, 0);
@@ -2040,7 +2039,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
  * mpt3sas_base_unmap_resources - free controller resources
  * @ioc: per adapter object
  */
-void
+static void
 mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct pci_dev *pdev = ioc->pdev;
@@ -2145,7 +2144,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 
 	_base_mask_interrupts(ioc);
 
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out_fail;
 
@@ -3183,12 +3182,11 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 /**
  * _base_allocate_memory_pools - allocate start of day memory pools
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 success, anything else error
  */
 static int
-_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct mpt3sas_facts *facts;
 	u16 max_sge_elements;
@@ -3658,29 +3656,25 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
  * _base_wait_on_iocstate - waiting on a particular ioc state
  * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
-	int sleep_flag)
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout)
 {
 	u32 count, cntdn;
 	u32 current_state;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		current_state = mpt3sas_base_get_iocstate(ioc, 1);
 		if (current_state == ioc_state)
 			return 0;
 		if (count && current_state == MPI2_IOC_STATE_FAULT)
 			break;
-		if (sleep_flag == CAN_SLEEP)
-			usleep_range(1000, 1500);
-		else
-			udelay(500);
+
+		usleep_range(1000, 1500);
 		count++;
 	} while (--cntdn);
 
@@ -3692,24 +3686,22 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
  * a write to the doorbell)
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
  */
 static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag);
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
 
 static int
-_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 int_status;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -3718,10 +3710,35 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
 				ioc->name, __func__, count, timeout));
 			return 0;
 		}
-		if (sleep_flag == CAN_SLEEP)
-			usleep_range(1000, 1500);
-		else
-			udelay(500);
+
+		usleep_range(1000, 1500);
+		count++;
+	} while (--cntdn);
+
+	pr_err(MPT3SAS_FMT
+		"%s: failed due to timeout count(%d), int_status(%x)!\n",
+		ioc->name, __func__, count, int_status);
+	return -EFAULT;
+}
+
+static int
+_base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 int_status;
+
+	count = 0;
+	cntdn = 2000 * timeout;
+	do {
+		int_status = readl(&ioc->chip->HostInterruptStatus);
+		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			dhsprintk(ioc, pr_info(MPT3SAS_FMT
+				"%s: successful count(%d), timeout(%d)\n",
+				ioc->name, __func__, count, timeout));
+			return 0;
+		}
+
+		udelay(500);
 		count++;
 	} while (--cntdn);
 
@@ -3729,13 +3746,13 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		"%s: failed due to timeout count(%d), int_status(%x)!\n",
 		ioc->name, __func__, count, int_status);
 	return -EFAULT;
+
 }
 
 /**
  * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
@@ -3743,15 +3760,14 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * doorbell.
  */
 static int
-_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 int_status;
 	u32 doorbell;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
@@ -3769,10 +3785,7 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		} else if (int_status == 0xFFFFFFFF)
 			goto out;
 
-		if (sleep_flag == CAN_SLEEP)
-			usleep_range(1000, 1500);
-		else
-			udelay(500);
+		usleep_range(1000, 1500);
 		count++;
 	} while (--cntdn);
 
@@ -3787,20 +3800,18 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
  * @ioc: per adapter object
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  *
  */
 static int
-_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 cntdn, count;
 	u32 doorbell_reg;
 
 	count = 0;
-	cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+	cntdn = 1000 * timeout;
 	do {
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
@@ -3809,10 +3820,8 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
 				ioc->name, __func__, count, timeout));
 			return 0;
 		}
-		if (sleep_flag == CAN_SLEEP)
-			usleep_range(1000, 1500);
-		else
-			udelay(500);
+
+		usleep_range(1000, 1500);
 		count++;
 	} while (--cntdn);
 
@@ -3827,13 +3836,11 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout,
  * @ioc: per adapter object
  * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
-	int sleep_flag)
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout)
 {
 	u32 ioc_state;
 	int r = 0;
@@ -3852,12 +3859,11 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
 
 	writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
 	    &ioc->chip->Doorbell);
-	if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
+	if ((_base_wait_for_doorbell_ack(ioc, 15))) {
 		r = -EFAULT;
 		goto out;
 	}
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
 	if (ioc_state) {
 		pr_err(MPT3SAS_FMT
 			"%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -3879,18 +3885,16 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout,
  * @reply_bytes: reply length
  * @reply: pointer to reply payload
  * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
 _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
-	u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
+	u32 *request, int reply_bytes, u16 *reply, int timeout)
 {
 	MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
 	int i;
 	u8 failed;
-	u16 dummy;
 	__le32 *mfp;
 
 	/* make sure doorbell is not in use */
@@ -3911,7 +3915,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
 	    &ioc->chip->Doorbell);
 
-	if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
+	if ((_base_spin_on_doorbell_int(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3919,7 +3923,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	}
 	writel(0, &ioc->chip->HostInterruptStatus);
 
-	if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
+	if ((_base_wait_for_doorbell_ack(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake ack failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3929,7 +3933,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	/* send message 32-bits at a time */
 	for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
 		writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
-		if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
+		if ((_base_wait_for_doorbell_ack(ioc, 5)))
 			failed = 1;
 	}
 
@@ -3941,7 +3945,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	}
 
 	/* now wait for the reply */
-	if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
+	if ((_base_wait_for_doorbell_int(ioc, timeout))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3952,7 +3956,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
 	    & MPI2_DOORBELL_DATA_MASK);
 	writel(0, &ioc->chip->HostInterruptStatus);
-	if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+	if ((_base_wait_for_doorbell_int(ioc, 5))) {
 		pr_err(MPT3SAS_FMT
 			"doorbell handshake int failed (line=%d)\n",
 			ioc->name, __LINE__);
@@ -3963,22 +3967,22 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	writel(0, &ioc->chip->HostInterruptStatus);
 
 	for (i = 2; i < default_reply->MsgLength * 2; i++)  {
-		if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+		if ((_base_wait_for_doorbell_int(ioc, 5))) {
 			pr_err(MPT3SAS_FMT
 				"doorbell handshake int failed (line=%d)\n",
 				ioc->name, __LINE__);
 			return -EFAULT;
 		}
 		if (i >=  reply_bytes/2) /* overflow case */
-			dummy = readl(&ioc->chip->Doorbell);
+			readl(&ioc->chip->Doorbell);
 		else
 			reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
 			    & MPI2_DOORBELL_DATA_MASK);
 		writel(0, &ioc->chip->HostInterruptStatus);
 	}
 
-	_base_wait_for_doorbell_int(ioc, 5, sleep_flag);
-	if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
+	_base_wait_for_doorbell_int(ioc, 5);
+	if (_base_wait_for_doorbell_not_used(ioc, 5) != 0) {
 		dhsprintk(ioc, pr_info(MPT3SAS_FMT
 			"doorbell is in use (line=%d)\n", ioc->name, __LINE__));
 	}
@@ -4015,7 +4019,6 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 {
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	bool issue_reset = false;
 	int rc;
 	void *request;
@@ -4068,7 +4071,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 		ioc->ioc_link_reset_in_progress = 1;
 	init_completion(&ioc->base_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+	wait_for_completion_timeout(&ioc->base_cmds.done,
 	    msecs_to_jiffies(10000));
 	if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
 	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
@@ -4093,8 +4096,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
 	rc = -EFAULT;
  out:
@@ -4119,7 +4121,6 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 {
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	bool issue_reset = false;
 	int rc;
 	void *request;
@@ -4170,7 +4171,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 	memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
 	init_completion(&ioc->base_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+	wait_for_completion_timeout(&ioc->base_cmds.done,
 	    msecs_to_jiffies(10000));
 	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -4191,8 +4192,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
 	rc = -EFAULT;
  out:
@@ -4203,12 +4203,11 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 /**
  * _base_get_port_facts - obtain port facts reply and save in ioc
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port)
 {
 	Mpi2PortFactsRequest_t mpi_request;
 	Mpi2PortFactsReply_t mpi_reply;
@@ -4224,7 +4223,7 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
 	mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
 	mpi_request.PortNumber = port;
 	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4247,13 +4246,11 @@ _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag)
  * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
  * @ioc: per adapter object
  * @timeout:
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
-	int sleep_flag)
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 {
 	u32 ioc_state;
 	int rc;
@@ -4287,8 +4284,7 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
 		goto issue_diag_reset;
 	}
 
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
-	    timeout, sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
 	if (ioc_state) {
 		dfailprintk(ioc, printk(MPT3SAS_FMT
 		    "%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -4297,19 +4293,18 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout,
 	}
 
  issue_diag_reset:
-	rc = _base_diag_reset(ioc, sleep_flag);
+	rc = _base_diag_reset(ioc);
 	return rc;
 }
 
 /**
  * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2IOCFactsRequest_t mpi_request;
 	Mpi2IOCFactsReply_t mpi_reply;
@@ -4319,7 +4314,7 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
 
-	r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
+	r = _base_wait_for_iocstate(ioc, 10);
 	if (r) {
 		dfailprintk(ioc, printk(MPT3SAS_FMT
 		    "%s: failed getting to correct state\n",
@@ -4331,7 +4326,7 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	memset(&mpi_request, 0, mpi_request_sz);
 	mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
 	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
-	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4391,12 +4386,11 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * _base_send_ioc_init - send ioc_init to firmware
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2IOCInitRequest_t mpi_request;
 	Mpi2IOCInitReply_t mpi_reply;
@@ -4479,8 +4473,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	r = _base_handshake_req_reply_wait(ioc,
 	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
-	    sleep_flag);
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
@@ -4555,16 +4548,14 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 /**
  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2PortEnableRequest_t *mpi_request;
 	Mpi2PortEnableReply_t *mpi_reply;
-	unsigned long timeleft;
 	int r = 0;
 	u16 smid;
 	u16 ioc_status;
@@ -4592,8 +4583,7 @@ _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	init_completion(&ioc->port_enable_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
-	    300*HZ);
+	wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ);
 	if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
 		    ioc->name, __func__);
@@ -4737,15 +4727,13 @@ _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
 /**
  * _base_event_notification - send event notification
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc)
 {
 	Mpi2EventNotificationRequest_t *mpi_request;
-	unsigned long timeleft;
 	u16 smid;
 	int r = 0;
 	int i;
@@ -4777,7 +4765,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		    cpu_to_le32(ioc->event_masks[i]);
 	init_completion(&ioc->base_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
+	wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
 	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
 		    ioc->name, __func__);
@@ -4827,19 +4815,18 @@ mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
 		return;
 
 	mutex_lock(&ioc->base_cmds.mutex);
-	_base_event_notification(ioc, CAN_SLEEP);
+	_base_event_notification(ioc);
 	mutex_unlock(&ioc->base_cmds.mutex);
 }
 
 /**
  * _base_diag_reset - the "big hammer" start of day reset
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 host_diagnostic;
 	u32 ioc_state;
@@ -4867,10 +4854,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
 
 		/* wait 100 msec */
-		if (sleep_flag == CAN_SLEEP)
-			msleep(100);
-		else
-			mdelay(100);
+		msleep(100);
 
 		if (count++ > 20)
 			goto out;
@@ -4890,10 +4874,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	     &ioc->chip->HostDiagnostic);
 
 	/*This delay allows the chip PCIe hardware time to finish reset tasks*/
-	if (sleep_flag == CAN_SLEEP)
-		msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
-	else
-		mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+	msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
 
 	/* Approximately 300 second max wait */
 	for (count = 0; count < (300000000 /
@@ -4906,13 +4887,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
 			break;
 
-		/* Wait to pass the second read delay window */
-		if (sleep_flag == CAN_SLEEP)
-			msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-								/ 1000);
-		else
-			mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
-								/ 1000);
+		msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000);
 	}
 
 	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
@@ -4941,8 +4916,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 
 	drsprintk(ioc, pr_info(MPT3SAS_FMT
 		"Wait for FW to go to the READY state\n", ioc->name));
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
-	    sleep_flag);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20);
 	if (ioc_state) {
 		pr_err(MPT3SAS_FMT
 			"%s: failed going to ready state (ioc_state=0x%x)\n",
@@ -4961,14 +4935,12 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * _base_make_ioc_ready - put controller in READY state
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  * @type: FORCE_BIG_HAMMER or SOFT_RESET
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
-	enum reset_type type)
+_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
 {
 	u32 ioc_state;
 	int rc;
@@ -4995,10 +4967,7 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 				    ioc->name, __func__, ioc_state);
 				return -EFAULT;
 			}
-			if (sleep_flag == CAN_SLEEP)
-				ssleep(1);
-			else
-				mdelay(1000);
+			ssleep(1);
 			ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
 		}
 	}
@@ -5024,24 +4993,23 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
 		if (!(_base_send_ioc_reset(ioc,
-		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
+		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15))) {
 			return 0;
 	}
 
  issue_diag_reset:
-	rc = _base_diag_reset(ioc, CAN_SLEEP);
+	rc = _base_diag_reset(ioc);
 	return rc;
 }
 
 /**
  * _base_make_ioc_operational - put controller in OPERATIONAL state
  * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * Returns 0 for success, non-zero for failure.
  */
 static int
-_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 {
 	int r, i, index;
 	unsigned long	flags;
@@ -5160,7 +5128,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 	}
  skip_init_reply_post_free_queue:
 
-	r = _base_send_ioc_init(ioc, sleep_flag);
+	r = _base_send_ioc_init(ioc);
 	if (r)
 		return r;
 
@@ -5186,13 +5154,11 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
  skip_init_reply_post_host_index:
 
 	_base_unmask_interrupts(ioc);
-	r = _base_event_notification(ioc, sleep_flag);
+	r = _base_event_notification(ioc);
 	if (r)
 		return r;
 
-	if (sleep_flag == CAN_SLEEP)
-		_base_static_config_pages(ioc);
-
+	_base_static_config_pages(ioc);
 
 	if (ioc->is_driver_loading) {
 
@@ -5211,7 +5177,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 		return r; /* scan_start and scan_finished support */
 	}
 
-	r = _base_send_port_enable(ioc, sleep_flag);
+	r = _base_send_port_enable(ioc);
 	if (r)
 		return r;
 
@@ -5235,7 +5201,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->chip_phys && ioc->chip) {
 		_base_mask_interrupts(ioc);
 		ioc->shost_recovery = 1;
-		_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+		_base_make_ioc_ready(ioc, SOFT_RESET);
 		ioc->shost_recovery = 0;
 	}
 
@@ -5292,7 +5258,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 		goto out_free_resources;
 
 	pci_set_drvdata(ioc->pdev, ioc->shost);
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5326,7 +5292,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->build_sg_mpi = &_base_build_sg;
 	ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
 
-	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+	r = _base_make_ioc_ready(ioc, SOFT_RESET);
 	if (r)
 		goto out_free_resources;
 
@@ -5338,12 +5304,12 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	}
 
 	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
-		r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+		r = _base_get_port_facts(ioc, i);
 		if (r)
 			goto out_free_resources;
 	}
 
-	r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
+	r = _base_allocate_memory_pools(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5429,7 +5395,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->hba_mpi_version_belonged == MPI26_VERSION)
 		_base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
 
-	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
+	r = _base_make_ioc_operational(ioc);
 	if (r)
 		goto out_free_resources;
 
@@ -5565,21 +5531,18 @@ _base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
 /**
  * _wait_for_commands_to_complete - reset controller
  * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  *
  * This function waiting(3s) for all pending commands to complete
  * prior to putting controller in reset.
  */
 static void
-_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
+_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 ioc_state;
 	unsigned long flags;
 	u16 i;
 
 	ioc->pending_io_count = 0;
-	if (sleep_flag != CAN_SLEEP)
-		return;
 
 	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
 	if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
@@ -5602,13 +5565,12 @@ _wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
 /**
  * mpt3sas_base_hard_reset_handler - reset controller
  * @ioc: Pointer to MPT_ADAPTER structure
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
  * @type: FORCE_BIG_HAMMER or SOFT_RESET
  *
  * Returns 0 for success, non-zero for failure.
  */
 int
-mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
 	enum reset_type type)
 {
 	int r;
@@ -5629,13 +5591,6 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 	if (mpt3sas_fwfault_debug)
 		mpt3sas_halt_firmware(ioc);
 
-	/* TODO - What we really should be doing is pulling
-	 * out all the code associated with NO_SLEEP; its never used.
-	 * That is legacy code from mpt fusion driver, ported over.
-	 * I will leave this BUG_ON here for now till its been resolved.
-	 */
-	BUG_ON(sleep_flag == NO_SLEEP);
-
 	/* wait for an active reset in progress to complete */
 	if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
 		do {
@@ -5660,9 +5615,9 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 			is_fault = 1;
 	}
 	_base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
-	_wait_for_commands_to_complete(ioc, sleep_flag);
+	_wait_for_commands_to_complete(ioc);
 	_base_mask_interrupts(ioc);
-	r = _base_make_ioc_ready(ioc, sleep_flag, type);
+	r = _base_make_ioc_ready(ioc, type);
 	if (r)
 		goto out;
 	_base_reset_handler(ioc, MPT3_IOC_AFTER_RESET);
@@ -5675,7 +5630,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 		r = -EFAULT;
 		goto out;
 	}
-	r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+	r = _base_get_ioc_facts(ioc);
 	if (r)
 		goto out;
 
@@ -5684,7 +5639,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
 		      "Please reboot the system and ensure that the correct"
 		      " firmware version is running\n", ioc->name);
 
-	r = _base_make_ioc_operational(ioc, sleep_flag);
+	r = _base_make_ioc_operational(ioc);
 	if (!r)
 		_base_reset_handler(ioc, MPT3_IOC_DONE_RESET);
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 892c9be..3e71bc1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -119,10 +119,6 @@
 
 #define MPT_MAX_CALLBACKS		32
 
-
-#define	 CAN_SLEEP			1
-#define  NO_SLEEP			0
-
 #define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
 /* reserved for issuing internally framed scsi io cmds */
 #define INTERNAL_SCSIIO_CMDS_COUNT	3
@@ -478,7 +474,7 @@ struct _sas_device {
 	u8	pfa_led_on;
 	u8	pend_sas_rphy_add;
 	u8	enclosure_level;
-	u8	connector_name[4];
+	u8	connector_name[5];
 	struct kref refcount;
 };
 
@@ -794,16 +790,6 @@ struct reply_post_struct {
 	dma_addr_t			reply_post_free_dma;
 };
 
-/**
- * enum mutex_type - task management mutex type
- * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
- * @TM_MUTEX_ON: mutex is required
- */
-enum mutex_type {
-	TM_MUTEX_OFF = 0,
-	TM_MUTEX_ON = 1,
-};
-
 typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
 /**
  * struct MPT3SAS_ADAPTER - per adapter struct
@@ -1229,7 +1215,7 @@ int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
 int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
-int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag,
+int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
 	enum reset_type type);
 
 void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);
@@ -1291,7 +1277,11 @@ void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
 
 int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	uint channel, uint id, uint lun, u8 type, u16 smid_task,
-	ulong timeout, enum mutex_type m_type);
+	ulong timeout);
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, uint lun, u8 type, u16 smid_task,
+	ulong timeout);
+
 void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
 void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
 void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index a6914ec..cebfd73 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -285,7 +285,6 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 {
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	Mpi2ConfigRequest_t *config_request;
 	int r;
 	u8 retry_count, issue_host_reset = 0;
@@ -386,8 +385,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	_config_display_some_debug(ioc, smid, "config_request", NULL);
 	init_completion(&ioc->config_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
-	    timeout*HZ);
+	wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
 	if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
 		    ioc->name, __func__);
@@ -491,8 +489,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	mutex_unlock(&ioc->config_cmds.mutex);
 
 	if (issue_host_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	return r;
 }
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 7d00f09..26cdc12 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -518,7 +518,7 @@ mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
  *
  * Called when application request fasyn callback handler.
  */
-int
+static int
 _ctl_fasync(int fd, struct file *filep, int mode)
 {
 	return fasync_helper(fd, filep, mode, &async_queue);
@@ -530,7 +530,7 @@ _ctl_fasync(int fd, struct file *filep, int mode)
  * @wait -
  *
  */
-unsigned int
+static unsigned int
 _ctl_poll(struct file *filep, poll_table *wait)
 {
 	struct MPT3SAS_ADAPTER *ioc;
@@ -641,9 +641,8 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	MPI2RequestHeader_t *mpi_request = NULL, *request;
 	MPI2DefaultReply_t *mpi_reply;
 	u32 ioc_state;
-	u16 ioc_status;
 	u16 smid;
-	unsigned long timeout, timeleft;
+	unsigned long timeout;
 	u8 issue_reset;
 	u32 sz;
 	void *psge;
@@ -914,8 +913,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 		timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
 	else
 		timeout = karg.timeout;
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
-	    timeout*HZ);
+	wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
 		Mpi2SCSITaskManagementRequest_t *tm_request =
 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
@@ -938,7 +936,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	}
 
 	mpi_reply = ioc->ctl_cmds.reply;
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 
 	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
 	    (ioc->logging_level & MPT_DEBUG_TM)) {
@@ -1001,13 +998,11 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 				ioc->name,
 				le16_to_cpu(mpi_request->FunctionDependent1));
 			mpt3sas_halt_firmware(ioc);
-			mpt3sas_scsih_issue_tm(ioc,
+			mpt3sas_scsih_issue_locked_tm(ioc,
 			    le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
-			    0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30,
-			    TM_MUTEX_ON);
+			    0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30);
 		} else
-			mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-			    FORCE_BIG_HAMMER);
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	}
 
  out:
@@ -1220,8 +1215,7 @@ _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
-	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	pr_info(MPT3SAS_FMT "host reset: %s\n",
 	    ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
 	return 0;
@@ -1381,7 +1375,6 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2DiagBufferPostRequest_t *mpi_request;
 	Mpi2DiagBufferPostReply_t *mpi_reply;
 	u8 buffer_type;
-	unsigned long timeleft;
 	u16 smid;
 	u16 ioc_status;
 	u32 ioc_state;
@@ -1499,7 +1492,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 
 	init_completion(&ioc->ctl_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
 
 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -1538,8 +1531,7 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
  out:
 
@@ -1800,7 +1792,6 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
 	u16 ioc_status;
 	u32 ioc_state;
 	int rc;
-	unsigned long timeleft;
 
 	dctlprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
 	    __func__));
@@ -1848,7 +1839,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
 
 	init_completion(&ioc->ctl_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
 
 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -1974,8 +1965,7 @@ _ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
 
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
 	return rc;
 }
@@ -1995,7 +1985,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 	Mpi2DiagBufferPostReply_t *mpi_reply;
 	int rc, i;
 	u8 buffer_type;
-	unsigned long timeleft, request_size, copy_size;
+	unsigned long request_size, copy_size;
 	u16 smid;
 	u16 ioc_status;
 	u8 issue_reset = 0;
@@ -2116,7 +2106,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 
 	init_completion(&ioc->ctl_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
 
 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
@@ -2155,8 +2145,7 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
  out:
 
@@ -2352,7 +2341,7 @@ out_unlock_pciaccess:
  * @cmd - ioctl opcode
  * @arg -
  */
-long
+static long
 _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret;
@@ -2372,7 +2361,7 @@ _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
  * @cmd - ioctl opcode
  * @arg -
  */
-long
+static long
 _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret;
@@ -2392,7 +2381,7 @@ _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
  *
  * This routine handles 32 bit applications in 64bit os.
  */
-long
+static long
 _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
 {
 	long ret;
@@ -2410,7 +2399,7 @@ _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
  *
  * This routine handles 32 bit applications in 64bit os.
  */
-long
+static long
 _ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
 {
 	long ret;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index cd91a68..209a969 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1195,7 +1195,7 @@ _scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
  *
  * Returns queue depth.
  */
-int
+static int
 scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
@@ -1244,7 +1244,7 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-int
+static int
 scsih_target_alloc(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
@@ -1311,7 +1311,7 @@ scsih_target_alloc(struct scsi_target *starget)
  *
  * Returns nothing.
  */
-void
+static void
 scsih_target_destroy(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
@@ -1320,7 +1320,6 @@ scsih_target_destroy(struct scsi_target *starget)
 	struct _sas_device *sas_device;
 	struct _raid_device *raid_device;
 	unsigned long flags;
-	struct sas_rphy *rphy;
 
 	sas_target_priv_data = starget->hostdata;
 	if (!sas_target_priv_data)
@@ -1339,7 +1338,6 @@ scsih_target_destroy(struct scsi_target *starget)
 	}
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	rphy = dev_to_rphy(starget->dev.parent);
 	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
 	if (sas_device && (sas_device->starget == starget) &&
 	    (sas_device->id == starget->id) &&
@@ -1369,7 +1367,7 @@ scsih_target_destroy(struct scsi_target *starget)
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-int
+static int
 scsih_slave_alloc(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost;
@@ -1434,7 +1432,7 @@ scsih_slave_alloc(struct scsi_device *sdev)
  *
  * Returns nothing.
  */
-void
+static void
 scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT3SAS_TARGET *sas_target_priv_data;
@@ -1527,7 +1525,7 @@ _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
  * scsih_is_raid - return boolean indicating device is raid volume
  * @dev the device struct object
  */
-int
+static int
 scsih_is_raid(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
@@ -1542,7 +1540,7 @@ scsih_is_raid(struct device *dev)
  * scsih_get_resync - get raid volume resync percent complete
  * @dev the device struct object
  */
-void
+static void
 scsih_get_resync(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
@@ -1603,7 +1601,7 @@ scsih_get_resync(struct device *dev)
  * scsih_get_state - get raid volume level
  * @dev the device struct object
  */
-void
+static void
 scsih_get_state(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
@@ -1805,7 +1803,7 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
  * Returns 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
-int
+static int
 scsih_slave_configure(struct scsi_device *sdev)
 {
 	struct Scsi_Host *shost = sdev->host;
@@ -2021,7 +2019,7 @@ scsih_slave_configure(struct scsi_device *sdev)
  *
  * Return nothing.
  */
-int
+static int
 scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 	sector_t capacity, int params[])
 {
@@ -2201,7 +2199,6 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
  * @smid_task: smid assigned to the task
  * @timeout: timeout in seconds
- * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
  * Context: user
  *
  * A generic API for sending task management requests to firmware.
@@ -2212,60 +2209,51 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  */
 int
 mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
-	uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
-	enum mutex_type m_type)
+	uint id, uint lun, u8 type, u16 smid_task, ulong timeout)
 {
 	Mpi2SCSITaskManagementRequest_t *mpi_request;
 	Mpi2SCSITaskManagementReply_t *mpi_reply;
 	u16 smid = 0;
 	u32 ioc_state;
-	unsigned long timeleft;
 	struct scsiio_tracker *scsi_lookup = NULL;
 	int rc;
 	u16 msix_task = 0;
 
-	if (m_type == TM_MUTEX_ON)
-		mutex_lock(&ioc->tm_cmds.mutex);
+	lockdep_assert_held(&ioc->tm_cmds.mutex);
+
 	if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) {
 		pr_info(MPT3SAS_FMT "%s: tm_cmd busy!!!\n",
 		    __func__, ioc->name);
-		rc = FAILED;
-		goto err_out;
+		return FAILED;
 	}
 
 	if (ioc->shost_recovery || ioc->remove_host ||
 	    ioc->pci_error_recovery) {
 		pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
 		    __func__, ioc->name);
-		rc = FAILED;
-		goto err_out;
+		return FAILED;
 	}
 
 	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
 	if (ioc_state & MPI2_DOORBELL_USED) {
 		dhsprintk(ioc, pr_info(MPT3SAS_FMT
 			"unexpected doorbell active!\n", ioc->name));
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		rc = (!rc) ? SUCCESS : FAILED;
-		goto err_out;
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
 	}
 
 	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
 		mpt3sas_base_fault_info(ioc, ioc_state &
 		    MPI2_DOORBELL_DATA_MASK);
-		rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
-		rc = (!rc) ? SUCCESS : FAILED;
-		goto err_out;
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
 	}
 
 	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
 	if (!smid) {
 		pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
-		rc = FAILED;
-		goto err_out;
+		return FAILED;
 	}
 
 	if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
@@ -2292,19 +2280,17 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
 	else
 		msix_task = 0;
 	mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task);
-	timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
+	wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
 	if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
 		    ioc->name, __func__);
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
 		if (!(ioc->tm_cmds.status & MPT3_CMD_RESET)) {
-			rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-			    FORCE_BIG_HAMMER);
+			rc = mpt3sas_base_hard_reset_handler(ioc,
+					FORCE_BIG_HAMMER);
 			rc = (!rc) ? SUCCESS : FAILED;
-			ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
-			mpt3sas_scsih_clear_tm_flag(ioc, handle);
-			goto err_out;
+			goto out;
 		}
 	}
 
@@ -2356,17 +2342,23 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
 		break;
 	}
 
+out:
 	mpt3sas_scsih_clear_tm_flag(ioc, handle);
 	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
-	if (m_type == TM_MUTEX_ON)
-		mutex_unlock(&ioc->tm_cmds.mutex);
-
 	return rc;
+}
 
- err_out:
-	if (m_type == TM_MUTEX_ON)
-		mutex_unlock(&ioc->tm_cmds.mutex);
-	return rc;
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, uint lun, u8 type, u16 smid_task, ulong timeout)
+{
+	int ret;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	ret = mpt3sas_scsih_issue_tm(ioc, handle, channel, id, lun, type,
+			smid_task, timeout);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+	return ret;
 }
 
 /**
@@ -2439,7 +2431,7 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-int
+static int
 scsih_abort(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
@@ -2482,9 +2474,9 @@ scsih_abort(struct scsi_cmnd *scmd)
 	mpt3sas_halt_firmware(ioc);
 
 	handle = sas_device_priv_data->sas_target->handle;
-	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
 	    scmd->device->id, scmd->device->lun,
-	    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, TM_MUTEX_ON);
+	    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30);
 
  out:
 	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
@@ -2498,7 +2490,7 @@ scsih_abort(struct scsi_cmnd *scmd)
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-int
+static int
 scsih_dev_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
@@ -2541,9 +2533,9 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
-	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
 	    scmd->device->id, scmd->device->lun,
-	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, TM_MUTEX_ON);
+	    MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30);
 
  out:
 	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
@@ -2561,7 +2553,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-int
+static int
 scsih_target_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
@@ -2603,9 +2595,9 @@ scsih_target_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
-	r = mpt3sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
 	    scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
-	    30, TM_MUTEX_ON);
+	    30);
 
  out:
 	starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
@@ -2624,7 +2616,7 @@ scsih_target_reset(struct scsi_cmnd *scmd)
  *
  * Returns SUCCESS if command aborted else FAILED
  */
-int
+static int
 scsih_host_reset(struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
@@ -2641,8 +2633,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
-	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
 out:
 	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
@@ -3455,7 +3446,7 @@ _scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
  *
  * Context - processed in interrupt context.
  */
-void
+static void
 _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
 				u32 event_context)
 {
@@ -3494,7 +3485,7 @@ _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
  *
  * Context - processed in interrupt context.
  */
-void
+static void
 _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
 					u16 smid, u16 handle)
 	{
@@ -4032,7 +4023,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
  * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
-int
+static int
 scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -4701,7 +4692,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 			    le16_to_cpu(mpi_reply->DevHandle));
 		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
 
-		if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
+		if ((ioc->logging_level & MPT_DEBUG_REPLY) &&
 		     ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
 		     (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
 		     (scmd->sense_buffer[2] == HARDWARE_ERROR)))
@@ -5380,8 +5371,9 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
 		     MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
 			sas_device->enclosure_level =
 				le16_to_cpu(sas_device_pg0.EnclosureLevel);
-			memcpy(&sas_device->connector_name[0],
-				&sas_device_pg0.ConnectorName[0], 4);
+			memcpy(sas_device->connector_name,
+				sas_device_pg0.ConnectorName, 4);
+			sas_device->connector_name[4] = '\0';
 		} else {
 			sas_device->enclosure_level = 0;
 			sas_device->connector_name[0] = '\0';
@@ -5508,8 +5500,9 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	if (sas_device_pg0.Flags & MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
 		sas_device->enclosure_level =
 			le16_to_cpu(sas_device_pg0.EnclosureLevel);
-		memcpy(&sas_device->connector_name[0],
-			&sas_device_pg0.ConnectorName[0], 4);
+		memcpy(sas_device->connector_name,
+			sas_device_pg0.ConnectorName, 4);
+		sas_device->connector_name[4] = '\0';
 	} else {
 		sas_device->enclosure_level = 0;
 		sas_device->connector_name[0] = '\0';
@@ -6087,8 +6080,7 @@ _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
 
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 		r = mpt3sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
-		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30,
-		    TM_MUTEX_OFF);
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
 		if (r == FAILED) {
 			sdev_printk(KERN_WARNING, sdev,
 			    "mpt3sas_scsih_issue_tm: FAILED when sending "
@@ -6128,8 +6120,8 @@ _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
 			goto out_no_lock;
 
 		r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
-		    sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
-		    TM_MUTEX_OFF);
+		    sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid,
+		    30);
 		if (r == FAILED) {
 			sdev_printk(KERN_WARNING, sdev,
 			    "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
@@ -6297,8 +6289,7 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
 	mutex_unlock(&ioc->scsih_cmds.mutex);
 
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	return rc;
 }
 
@@ -6311,11 +6302,10 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
 static void
 _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
 {
-	int rc;
 	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
 	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
 	    sdev->no_uld_attach ? "hidding" : "exposing");
-	rc = scsi_device_reprobe(sdev);
+	WARN_ON(scsi_device_reprobe(sdev));
 }
 
 /**
@@ -8137,7 +8127,7 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
  * Routine called when unloading the driver.
  * Return nothing.
  */
-void scsih_remove(struct pci_dev *pdev)
+static void scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8210,7 +8200,7 @@ void scsih_remove(struct pci_dev *pdev)
  *
  * Return nothing.
  */
-void
+static void
 scsih_shutdown(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -8451,7 +8441,7 @@ _scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
  * of scanning the entire bus.  In our implemention, we will kick off
  * firmware discovery.
  */
-void
+static void
 scsih_scan_start(struct Scsi_Host *shost)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8478,7 +8468,7 @@ scsih_scan_start(struct Scsi_Host *shost)
  * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
  * we wait for firmware discovery to complete, then return 1.
  */
-int
+static int
 scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
 {
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -8608,7 +8598,7 @@ static struct raid_function_template mpt3sas_raid_functions = {
  *	MPI25_VERSION for SAS 3.0 HBA devices, and
  *	MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
  */
-u16
+static u16
 _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
 {
 
@@ -8660,7 +8650,7 @@ _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
  *
  * Returns 0 success, anything else error.
  */
-int
+static int
 _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct MPT3SAS_ADAPTER *ioc;
@@ -8869,7 +8859,7 @@ out_add_shost_fail:
  *
  * Returns 0 success, anything else error.
  */
-int
+static int
 scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -8896,7 +8886,7 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state)
  *
  * Returns 0 success, anything else error.
  */
-int
+static int
 scsih_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -8916,7 +8906,7 @@ scsih_resume(struct pci_dev *pdev)
 	if (r)
 		return r;
 
-	mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
+	mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
 	scsi_unblock_requests(shost);
 	mpt3sas_base_start_watchdog(ioc);
 	return 0;
@@ -8933,7 +8923,7 @@ scsih_resume(struct pci_dev *pdev)
  * Return value:
  *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
  */
-pci_ers_result_t
+static pci_ers_result_t
 scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -8970,7 +8960,7 @@ scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
  * code after the PCI slot has been reset, just before we
  * should resume normal operations.
  */
-pci_ers_result_t
+static pci_ers_result_t
 scsih_pci_slot_reset(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -8987,8 +8977,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
 	if (rc)
 		return PCI_ERS_RESULT_DISCONNECT;
 
-	rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-	    FORCE_BIG_HAMMER);
+	rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 
 	pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name,
 	    (rc == 0) ? "success" : "failed");
@@ -9007,7 +8996,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
  * OK to resume normal operation. Use completion to allow
  * halted scsi ops to resume.
  */
-void
+static void
 scsih_pci_resume(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -9024,7 +9013,7 @@ scsih_pci_resume(struct pci_dev *pdev)
  * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
  * @pdev: pointer to PCI device
  */
-pci_ers_result_t
+static pci_ers_result_t
 scsih_pci_mmio_enabled(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
@@ -9152,7 +9141,7 @@ static struct pci_driver mpt3sas_driver = {
  *
  * Returns 0 success, anything else error.
  */
-int
+static int
 scsih_init(void)
 {
 	mpt2_ids = 0;
@@ -9202,7 +9191,7 @@ scsih_init(void)
  *
  * Returns 0 success, anything else error.
  */
-void
+static void
 scsih_exit(void)
 {
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index ff93286..b74faf1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -300,7 +300,6 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 	int rc;
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
@@ -394,8 +393,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 		ioc->name, (unsigned long long)sas_address));
 	init_completion(&ioc->transport_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
 
 	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -446,8 +444,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -1107,7 +1104,6 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 	int rc;
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
@@ -1203,8 +1199,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 		phy->number));
 	init_completion(&ioc->transport_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
 
 	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -1253,8 +1248,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -1421,7 +1415,6 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 	int rc;
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
@@ -1522,8 +1515,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 		phy->number, phy_operation));
 	init_completion(&ioc->transport_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
 
 	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s: timeout\n",
@@ -1564,8 +1556,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 
  issue_host_reset:
 	if (issue_reset)
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
  out:
 	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
 	if (data_out)
@@ -1899,7 +1890,6 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	int rc;
 	u16 smid;
 	u32 ioc_state;
-	unsigned long timeleft;
 	void *psge;
 	u8 issue_reset = 0;
 	dma_addr_t dma_addr_in = 0;
@@ -2043,8 +2033,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	init_completion(&ioc->transport_cmds.done);
 	mpt3sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
-	    10*HZ);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
 
 	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
 		pr_err(MPT3SAS_FMT "%s : timeout\n",
@@ -2103,8 +2092,7 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
  issue_host_reset:
 	if (issue_reset) {
-		mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
-		    FORCE_BIG_HAMMER);
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 		rc = -ETIMEDOUT;
 	}