mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs

Modified the mpt3sas driver to have a single driver module which
supports both SAS 2.0 & SAS 3.0 HBA devices.

* Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table.

* Created two separate SCSI host templates for SAS2 and SAS3 HBAs so
  that, during the driver load time driver can use corresponding host
  template(based the pci device ID) while registering a scsi host
  adapter instance for that pci device.

* Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for
  SAS3 HBAs. Also updated the code to make sure that mpt2ctl device
  processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl
  device processes only those ioctl cmds issued for the SAS3 HBAs.

* Added separate indexing for SAS2 and SAS3 HBAs.

* Replaced compile time check 'MPT2SAS_SCSI' to run time check
  'hba_mpi_version_belonged' whereever needed.

* Aliased this merged driver to mpt2sas using MODULE_ALIAS.

* Moved global varaible 'driver_name' to per adapter instance variable.

* Created two raid function template and used corresponding raid
  function templates based on the run time check
  'hba_mpi_version_belonged'.

* Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and
  renamed it as mpt3sas_warpdrive.c.

* Also renamed the functions in mpt3sas_warpdrive.c file to follow
  current driver function name convention.

* Updated the Makefile to build mpt3sas_warpdrive.o file for these
  WarpDrive-specific functions.

* Also in function mpt3sas_setup_direct_io(), used sector_div() API
  instead of division operator (which gives compilation errors on 32 bit
  machines).

* Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file.

* Added module parameter 'hbas_to_enumerate' which permits using this
  merged driver as a legacy mpt2sas driver or as a legacy mpt3sas
  driver.

  Here are the available options for this module parameter:

   0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs
   1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs
   2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs

* Removed mpt2sas entries from SCSI's Kconfig and Makefile files.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 19 insertions, 42 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 213d7f8..25c141c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -935,6 +935,7 @@ struct MPT3SAS_ADAPTER {
 	u8		id;
 	int		cpu_count;
 	char		name[MPT_NAME_LENGTH];
+	char		driver_name[MPT_NAME_LENGTH];
 	char		tmp_string[MPT_STRING_LENGTH];
 	struct pci_dev	*pdev;
 	Mpi2SystemInterfaceRegs_t __iomem *chip;
@@ -1246,7 +1247,6 @@ int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
 
 
 /* scsih shared API */
-extern struct raid_template *mpt3sas_raid_template;
 u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	u32 reply);
 void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
@@ -1270,39 +1270,8 @@ struct _sas_device *__mpt3sas_get_sdev_by_addr(
 	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
 
 void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
-
-void scsih_exit(void);
-int scsih_init(void);
-int scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost);
-void scsih_remove(struct pci_dev *pdev);
-void scsih_shutdown(struct pci_dev *pdev);
-pci_ers_result_t scsih_pci_error_detected(struct pci_dev *pdev,
-	pci_channel_state_t state);
-pci_ers_result_t scsih_pci_mmio_enabled(struct pci_dev *pdev);
-pci_ers_result_t scsih_pci_slot_reset(struct pci_dev *pdev);
-void scsih_pci_resume(struct pci_dev *pdev);
-int scsih_suspend(struct pci_dev *pdev, pm_message_t state);
-int scsih_resume(struct pci_dev *pdev);
-
-int scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd);
-int scsih_target_alloc(struct scsi_target *starget);
-int scsih_slave_alloc(struct scsi_device *sdev);
-int scsih_slave_configure(struct scsi_device *sdev);
-void scsih_target_destroy(struct scsi_target *starget);
-void scsih_slave_destroy(struct scsi_device *sdev);
-int scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-void scsih_scan_start(struct Scsi_Host *shost);
-int scsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
-int scsih_abort(struct scsi_cmnd *scmd);
-int scsih_dev_reset(struct scsi_cmnd *scmd);
-int scsih_target_reset(struct scsi_cmnd *scmd);
-int scsih_host_reset(struct scsi_cmnd *scmd);
-int scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
-	sector_t capacity, int params[]);
-
-int scsih_is_raid(struct device *dev);
-void scsih_get_resync(struct device *dev);
-void scsih_get_state(struct device *dev);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
 
 /* config shared API */
 u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
@@ -1342,10 +1311,8 @@ int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
 	u16 sz);
 int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
-#ifdef SCSI_MPT2SAS
 int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
-#endif
 int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
 int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
@@ -1390,12 +1357,8 @@ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
 /* ctl shared API */
 extern struct device_attribute *mpt3sas_host_attrs[];
 extern struct device_attribute *mpt3sas_dev_attrs[];
-long ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-unsigned int ctl_poll(struct file *filep, poll_table *wait);
-int ctl_fasync(int fd, struct file *filep, int mode);
-long ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg);
-void ctl_init(void);
-void ctl_exit(void);
+void mpt3sas_ctl_init(ushort hbas_to_enumerate);
+void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
 u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	u32 reply);
 void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
@@ -1442,4 +1405,18 @@ void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
 	u8 asc, u8 ascq);
 void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
 	u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device);
+inline u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+inline void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	u16 smid);
+
 #endif /* MPT3SAS_BASE_H_INCLUDED */