Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

19 files changed, 623 insertions, 296 deletions

diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index ad05d6e..88928f0 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -1,7 +1,7 @@
 #/*******************************************************************
 # * This file is part of the Emulex Linux Device Driver for         *
 # * Fibre Channel Host Bus Adapters.                                *
-# * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
+# * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
 # * EMULEX and SLI are trademarks of Emulex.                        *
 # * www.emulex.com                                                  *
 # *                                                                 *
@@ -19,10 +19,8 @@
 # *******************************************************************/
 ######################################################################
 
-ifneq ($(GCOV),)
-  EXTRA_CFLAGS += -fprofile-arcs -ftest-coverage
-  EXTRA_CFLAGS += -O0
-endif
+ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
+ccflags-$(GCOV) += -O0
 
 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
 
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index b64c6da..60e98a62 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -539,6 +539,8 @@ struct lpfc_hba {
 		(struct lpfc_hba *, uint32_t);
 	int (*lpfc_hba_down_link)
 		(struct lpfc_hba *, uint32_t);
+	int (*lpfc_selective_reset)
+		(struct lpfc_hba *);
 
 	/* SLI4 specific HBA data structure */
 	struct lpfc_sli4_hba sli4_hba;
@@ -895,7 +897,18 @@ lpfc_worker_wake_up(struct lpfc_hba *phba)
 	return;
 }
 
-static inline void
+static inline int
+lpfc_readl(void __iomem *addr, uint32_t *data)
+{
+	uint32_t temp;
+	temp = readl(addr);
+	if (temp == 0xffffffff)
+		return -EIO;
+	*data = temp;
+	return 0;
+}
+
+static inline int
 lpfc_sli_read_hs(struct lpfc_hba *phba)
 {
 	/*
@@ -904,15 +917,17 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
 	 */
 	phba->sli.slistat.err_attn_event++;
 
-	/* Save status info */
-	phba->work_hs = readl(phba->HSregaddr);
-	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
-	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+	/* Save status info and check for unplug error */
+	if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
+		lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
+		lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
+		return -EIO;
+	}
 
 	/* Clear chip Host Attention error bit */
 	writel(HA_ERATT, phba->HAregaddr);
 	readl(phba->HAregaddr); /* flush */
 	phba->pport->stopped = 1;
 
-	return;
+	return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index e7c020d..17d7893 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -685,7 +685,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
  * -EIO reset not configured or error posting the event
  * zero for success
  **/
-static int
+int
 lpfc_selective_reset(struct lpfc_hba *phba)
 {
 	struct completion online_compl;
@@ -746,7 +746,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
 	int status = -EINVAL;
 
 	if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
-		status = lpfc_selective_reset(phba);
+		status = phba->lpfc_selective_reset(phba);
 
 	if (status == 0)
 		return strlen(buf);
@@ -1224,7 +1224,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
 	if (val & ENABLE_FCP_RING_POLLING) {
 		if ((val & DISABLE_FCP_RING_INT) &&
 		    !(old_val & DISABLE_FCP_RING_INT)) {
-			creg_val = readl(phba->HCregaddr);
+			if (lpfc_readl(phba->HCregaddr, &creg_val)) {
+				spin_unlock_irq(&phba->hbalock);
+				return -EINVAL;
+			}
 			creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
 			writel(creg_val, phba->HCregaddr);
 			readl(phba->HCregaddr); /* flush */
@@ -1242,7 +1245,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
 		spin_unlock_irq(&phba->hbalock);
 		del_timer(&phba->fcp_poll_timer);
 		spin_lock_irq(&phba->hbalock);
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val)) {
+			spin_unlock_irq(&phba->hbalock);
+			return -EINVAL;
+		}
 		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -4509,7 +4515,7 @@ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
  * Description:
  * This function is called by the transport after the @fc_vport's symbolic name
  * has been changed. This function re-registers the symbolic name with the
- * switch to propogate the change into the fabric if the vport is active.
+ * switch to propagate the change into the fabric if the vport is active.
  **/
 static void
 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 04fef03..3811ea9 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009-2010 Emulex.  All rights reserved.                *
+ * Copyright (C) 2009-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -348,7 +348,10 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
 	dd_data->context_un.iocb.bmp = bmp;
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val)) {
+			rc = -EIO ;
+			goto free_cmdiocbq;
+		}
 		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -599,7 +602,10 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
 	dd_data->context_un.iocb.ndlp = ndlp;
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val)) {
+			rc = -EIO;
+			goto linkdown_err;
+		}
 		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -613,6 +619,7 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
 	else
 		rc = -EIO;
 
+linkdown_err:
 	pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
 		     job->request_payload.sg_cnt, DMA_TO_DEVICE);
 	pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list,
@@ -1357,7 +1364,10 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag,
 	dd_data->context_un.iocb.ndlp = ndlp;
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val)) {
+			rc = -IOCB_ERROR;
+			goto issue_ct_rsp_exit;
+		}
 		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -1929,7 +1939,7 @@ out:
  * @rxxri: Receive exchange id
  * @len: Number of data bytes
  *
- * This function allocates and posts a data buffer of sufficient size to recieve
+ * This function allocates and posts a data buffer of sufficient size to receive
  * an unsolicted CT command.
  **/
 static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
@@ -2479,16 +2489,18 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 
 	from = (uint8_t *)dd_data->context_un.mbox.mb;
 	job = dd_data->context_un.mbox.set_job;
-	size = job->reply_payload.payload_len;
-	job->reply->reply_payload_rcv_len =
-		sg_copy_from_buffer(job->reply_payload.sg_list,
-				job->reply_payload.sg_cnt,
-				from, size);
-	job->reply->result = 0;
+	if (job) {
+		size = job->reply_payload.payload_len;
+		job->reply->reply_payload_rcv_len =
+			sg_copy_from_buffer(job->reply_payload.sg_list,
+					job->reply_payload.sg_cnt,
+					from, size);
+		job->reply->result = 0;
 
+		job->dd_data = NULL;
+		job->job_done(job);
+	}
 	dd_data->context_un.mbox.set_job = NULL;
-	job->dd_data = NULL;
-	job->job_done(job);
 	/* need to hold the lock until we call job done to hold off
 	 * the timeout handler returning to the midlayer while
 	 * we are stillprocessing the job
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 3d40023..f0b332f 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2010 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -254,8 +254,8 @@ uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
 void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
 			   uint32_t);
 void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
-
-void lpfc_reset_barrier(struct lpfc_hba * phba);
+int lpfc_selective_reset(struct lpfc_hba *);
+void lpfc_reset_barrier(struct lpfc_hba *);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
 int lpfc_sli_brdkill(struct lpfc_hba *);
 int lpfc_sli_brdreset(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a753581..3d96774 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -908,7 +908,7 @@ lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file)
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR "9059 BLKGRD:  %s: _dump_buf_data=0x%p\n",
 			__func__, _dump_buf_data);
 	debug->buffer = _dump_buf_data;
@@ -938,7 +938,7 @@ lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file)
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR	"9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
 		__func__, _dump_buf_dif, file->f_dentry->d_name.name);
 	debug->buffer = _dump_buf_dif;
@@ -2158,7 +2158,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			debugfs_create_dir(name, phba->hba_debugfs_root);
 		if (!vport->vport_debugfs_root) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-					 "0417 Cant create debugfs\n");
+					 "0417 Can't create debugfs\n");
 			goto debug_failed;
 		}
 		atomic_inc(&phba->debugfs_vport_count);
@@ -2211,7 +2211,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				 vport, &lpfc_debugfs_op_nodelist);
 	if (!vport->debug_nodelist) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				 "0409 Cant create debugfs nodelist\n");
+				 "0409 Can't create debugfs nodelist\n");
 		goto debug_failed;
 	}
 
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8e28edf..d34b69f 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -89,7 +89,8 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 		return 0;
 
 	/* Read the HBA Host Attention Register */
-	ha_copy = readl(phba->HAregaddr);
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		return 1;
 
 	if (!(ha_copy & HA_LATT))
 		return 0;
@@ -101,7 +102,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 			 phba->pport->port_state);
 
 	/* CLEAR_LA should re-enable link attention events and
-	 * we should then imediately take a LATT event. The
+	 * we should then immediately take a LATT event. The
 	 * LATT processing should call lpfc_linkdown() which
 	 * will cleanup any left over in-progress discovery
 	 * events.
@@ -1598,7 +1599,7 @@ out:
  * This routine is the completion callback function for issuing the Port
  * Login (PLOGI) command. For PLOGI completion, there must be an active
  * ndlp on the vport node list that matches the remote node ID from the
- * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply
+ * PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply
  * ignored and command IOCB released. The PLOGI response IOCB status is
  * checked for error conditons. If there is error status reported, PLOGI
  * retry shall be attempted by invoking the lpfc_els_retry() routine.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 154c715..3014983 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -739,7 +739,7 @@ lpfc_do_work(void *p)
 
 /*
  * This is only called to handle FC worker events. Since this a rare
- * occurance, we allocate a struct lpfc_work_evt structure here instead of
+ * occurrence, we allocate a struct lpfc_work_evt structure here instead of
  * embedding it in the IOCB.
  */
 int
@@ -1348,7 +1348,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
 	int rc;
 
 	spin_lock_irq(&phba->hbalock);
-	/* If the FCF is not availabe do nothing. */
+	/* If the FCF is not available do nothing. */
 	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
 		phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
 		spin_unlock_irq(&phba->hbalock);
@@ -1538,7 +1538,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 
 		/*
 		 * If user did not specify any addressing mode, or if the
-		 * prefered addressing mode specified by user is not supported
+		 * preferred addressing mode specified by user is not supported
 		 * by FCF, allow fabric to pick the addressing mode.
 		 */
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
@@ -1553,7 +1553,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 				FCFCNCT_AM_SPMA) ?
 				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
 		/*
-		 * If the user specified a prefered address mode, use the
+		 * If the user specified a preferred address mode, use the
 		 * addr mode only if FCF support the addr_mode.
 		 */
 		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
@@ -3117,7 +3117,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		 * back at reg login state so this
 		 * mbox needs to be ignored becase
 		 * there is another reg login in
-		 * proccess.
+		 * process.
 		 */
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
@@ -4477,7 +4477,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 	if ((vport->fc_flag & FC_RSCN_MODE) &&
 	    !(vport->fc_flag & FC_NDISC_ACTIVE)) {
 		if (lpfc_rscn_payload_check(vport, did)) {
-			/* If we've already recieved a PLOGI from this NPort
+			/* If we've already received a PLOGI from this NPort
 			 * we don't need to try to discover it again.
 			 */
 			if (ndlp->nlp_flag & NLP_RCV_PLOGI)
@@ -4493,7 +4493,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 		} else
 			ndlp = NULL;
 	} else {
-		/* If we've already recieved a PLOGI from this NPort,
+		/* If we've already received a PLOGI from this NPort,
 		 * or we are already in the process of discovery on it,
 		 * we don't need to try to discover it again.
 		 */
@@ -5756,7 +5756,7 @@ lpfc_read_fcoe_param(struct lpfc_hba *phba,
  * @size: Size of the data buffer.
  * @rec_type: Record type to be searched.
  *
- * This function searches config region data to find the begining
+ * This function searches config region data to find the beginning
  * of the record specified by record_type. If record found, this
  * function return pointer to the record else return NULL.
  */
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 94ae37c..95f11ed 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1344,7 +1344,7 @@ typedef struct {		/* FireFly BIU registers */
 #define HS_FFER1       0x80000000	/* Bit 31 */
 #define HS_CRIT_TEMP   0x00000100	/* Bit 8  */
 #define HS_FFERM       0xFF000100	/* Mask for error bits 31:24 and 8 */
-
+#define UNPLUG_ERR     0x00000001	/* Indicate pci hot unplug */
 /* Host Control Register */
 
 #define HC_REG_OFFSET  12	/* Byte offset from register base address */
@@ -1713,6 +1713,17 @@ struct lpfc_pde6 {
 #define pde6_apptagval_WORD	word2
 };
 
+struct lpfc_pde7 {
+	uint32_t word0;
+#define pde7_type_SHIFT		24
+#define pde7_type_MASK		0x000000ff
+#define pde7_type_WORD		word0
+#define pde7_rsvd0_SHIFT	0
+#define pde7_rsvd0_MASK		0x00ffffff
+#define pde7_rsvd0_WORD		word0
+	uint32_t addrHigh;
+	uint32_t addrLow;
+};
 
 /* Structure for MB Command LOAD_SM and DOWN_LOAD */
 
@@ -3621,7 +3632,7 @@ typedef struct _IOCB {	/* IOCB structure */
 		ASYNCSTAT_FIELDS asyncstat; /* async_status iocb */
 		QUE_XRI64_CX_FIELDS quexri64cx; /* que_xri64_cx fields */
 		struct rcv_seq64 rcvseq64;	/* RCV_SEQ64 and RCV_CONT64 */
-		struct sli4_bls_acc bls_acc; /* UNSOL ABTS BLS_ACC params */
+		struct sli4_bls_rsp bls_rsp; /* UNSOL ABTS BLS_RSP params */
 		uint32_t ulpWord[IOCB_WORD_SZ - 2];	/* generic 6 'words' */
 	} un;
 	union {
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index c7178d6..8433ac0 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -215,7 +215,7 @@ struct lpfc_sli4_flags {
 #define lpfc_fip_flag_WORD word0
 };
 
-struct sli4_bls_acc {
+struct sli4_bls_rsp {
 	uint32_t word0_rsvd;      /* Word0 must be reserved */
 	uint32_t word1;
 #define lpfc_abts_orig_SHIFT      0
@@ -231,6 +231,16 @@ struct sli4_bls_acc {
 #define lpfc_abts_oxid_MASK       0x0000FFFF
 #define lpfc_abts_oxid_WORD       word2
 	uint32_t word3;
+#define lpfc_vndr_code_SHIFT	0
+#define lpfc_vndr_code_MASK	0x000000FF
+#define lpfc_vndr_code_WORD	word3
+#define lpfc_rsn_expln_SHIFT	8
+#define lpfc_rsn_expln_MASK	0x000000FF
+#define lpfc_rsn_expln_WORD	word3
+#define lpfc_rsn_code_SHIFT	16
+#define lpfc_rsn_code_MASK	0x000000FF
+#define lpfc_rsn_code_WORD	word3
+
 	uint32_t word4;
 	uint32_t word5_rsvd;	/* Word5 must be reserved */
 };
@@ -711,21 +721,27 @@ struct lpfc_sli4_cfg_mhdr {
 union lpfc_sli4_cfg_shdr {
 	struct {
 		uint32_t word6;
-#define lpfc_mbox_hdr_opcode_SHIFT		0
-#define lpfc_mbox_hdr_opcode_MASK		0x000000FF
-#define lpfc_mbox_hdr_opcode_WORD		word6
-#define lpfc_mbox_hdr_subsystem_SHIFT		8
-#define lpfc_mbox_hdr_subsystem_MASK		0x000000FF
-#define lpfc_mbox_hdr_subsystem_WORD		word6
-#define lpfc_mbox_hdr_port_number_SHIFT		16
-#define lpfc_mbox_hdr_port_number_MASK		0x000000FF
-#define lpfc_mbox_hdr_port_number_WORD		word6
-#define lpfc_mbox_hdr_domain_SHIFT		24
-#define lpfc_mbox_hdr_domain_MASK		0x000000FF
-#define lpfc_mbox_hdr_domain_WORD		word6
+#define lpfc_mbox_hdr_opcode_SHIFT	0
+#define lpfc_mbox_hdr_opcode_MASK	0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD	word6
+#define lpfc_mbox_hdr_subsystem_SHIFT	8
+#define lpfc_mbox_hdr_subsystem_MASK	0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD	word6
+#define lpfc_mbox_hdr_port_number_SHIFT	16
+#define lpfc_mbox_hdr_port_number_MASK	0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD	word6
+#define lpfc_mbox_hdr_domain_SHIFT	24
+#define lpfc_mbox_hdr_domain_MASK	0x000000FF
+#define lpfc_mbox_hdr_domain_WORD	word6
 		uint32_t timeout;
 		uint32_t request_length;
-		uint32_t reserved9;
+		uint32_t word9;
+#define lpfc_mbox_hdr_version_SHIFT	0
+#define lpfc_mbox_hdr_version_MASK	0x000000FF
+#define lpfc_mbox_hdr_version_WORD	word9
+#define LPFC_Q_CREATE_VERSION_2	2
+#define LPFC_Q_CREATE_VERSION_1	1
+#define LPFC_Q_CREATE_VERSION_0	0
 	} request;
 	struct {
 		uint32_t word6;
@@ -917,9 +933,12 @@ struct cq_context {
 #define LPFC_CQ_CNT_512		0x1
 #define LPFC_CQ_CNT_1024	0x2
 	uint32_t word1;
-#define lpfc_cq_eq_id_SHIFT		22
+#define lpfc_cq_eq_id_SHIFT		22	/* Version 0 Only */
 #define lpfc_cq_eq_id_MASK		0x000000FF
 #define lpfc_cq_eq_id_WORD		word1
+#define lpfc_cq_eq_id_2_SHIFT		0 	/* Version 2 Only */
+#define lpfc_cq_eq_id_2_MASK		0x0000FFFF
+#define lpfc_cq_eq_id_2_WORD		word1
 	uint32_t reserved0;
 	uint32_t reserved1;
 };
@@ -929,6 +948,9 @@ struct lpfc_mbx_cq_create {
 	union {
 		struct {
 			uint32_t word0;
+#define lpfc_mbx_cq_create_page_size_SHIFT	16	/* Version 2 Only */
+#define lpfc_mbx_cq_create_page_size_MASK	0x000000FF
+#define lpfc_mbx_cq_create_page_size_WORD	word0
 #define lpfc_mbx_cq_create_num_pages_SHIFT	0
 #define lpfc_mbx_cq_create_num_pages_MASK	0x0000FFFF
 #define lpfc_mbx_cq_create_num_pages_WORD	word0
@@ -969,7 +991,7 @@ struct wq_context {
 struct lpfc_mbx_wq_create {
 	struct mbox_header header;
 	union {
-		struct {
+		struct {	/* Version 0 Request */
 			uint32_t word0;
 #define lpfc_mbx_wq_create_num_pages_SHIFT	0
 #define lpfc_mbx_wq_create_num_pages_MASK	0x0000FFFF
@@ -979,6 +1001,23 @@ struct lpfc_mbx_wq_create {
 #define lpfc_mbx_wq_create_cq_id_WORD		word0
 			struct dma_address page[LPFC_MAX_WQ_PAGE];
 		} request;
+		struct {	/* Version 1 Request */
+			uint32_t word0;	/* Word 0 is the same as in v0 */
+			uint32_t word1;
+#define lpfc_mbx_wq_create_page_size_SHIFT	0
+#define lpfc_mbx_wq_create_page_size_MASK	0x000000FF
+#define lpfc_mbx_wq_create_page_size_WORD	word1
+#define lpfc_mbx_wq_create_wqe_size_SHIFT	8
+#define lpfc_mbx_wq_create_wqe_size_MASK	0x0000000F
+#define lpfc_mbx_wq_create_wqe_size_WORD	word1
+#define LPFC_WQ_WQE_SIZE_64	0x5
+#define LPFC_WQ_WQE_SIZE_128	0x6
+#define lpfc_mbx_wq_create_wqe_count_SHIFT	16
+#define lpfc_mbx_wq_create_wqe_count_MASK	0x0000FFFF
+#define lpfc_mbx_wq_create_wqe_count_WORD	word1
+			uint32_t word2;
+			struct dma_address page[LPFC_MAX_WQ_PAGE-1];
+		} request_1;
 		struct {
 			uint32_t word0;
 #define lpfc_mbx_wq_create_q_id_SHIFT	0
@@ -1007,13 +1046,22 @@ struct lpfc_mbx_wq_destroy {
 #define LPFC_DATA_BUF_SIZE 2048
 struct rq_context {
 	uint32_t word0;
-#define lpfc_rq_context_rq_size_SHIFT	16
-#define lpfc_rq_context_rq_size_MASK	0x0000000F
-#define lpfc_rq_context_rq_size_WORD	word0
+#define lpfc_rq_context_rqe_count_SHIFT	16	/* Version 0 Only */
+#define lpfc_rq_context_rqe_count_MASK	0x0000000F
+#define lpfc_rq_context_rqe_count_WORD	word0
 #define LPFC_RQ_RING_SIZE_512		9	/* 512 entries */
 #define LPFC_RQ_RING_SIZE_1024		10	/* 1024 entries */
 #define LPFC_RQ_RING_SIZE_2048		11	/* 2048 entries */
 #define LPFC_RQ_RING_SIZE_4096		12	/* 4096 entries */
+#define lpfc_rq_context_rqe_count_1_SHIFT	16	/* Version 1 Only */
+#define lpfc_rq_context_rqe_count_1_MASK	0x0000FFFF
+#define lpfc_rq_context_rqe_count_1_WORD	word0
+#define lpfc_rq_context_rqe_size_SHIFT	8		/* Version 1 Only */
+#define lpfc_rq_context_rqe_size_MASK	0x0000000F
+#define lpfc_rq_context_rqe_size_WORD	word0
+#define lpfc_rq_context_page_size_SHIFT	0		/* Version 1 Only */
+#define lpfc_rq_context_page_size_MASK	0x000000FF
+#define lpfc_rq_context_page_size_WORD	word0
 	uint32_t reserved1;
 	uint32_t word2;
 #define lpfc_rq_context_cq_id_SHIFT	16
@@ -1022,7 +1070,7 @@ struct rq_context {
 #define lpfc_rq_context_buf_size_SHIFT	0
 #define lpfc_rq_context_buf_size_MASK	0x0000FFFF
 #define lpfc_rq_context_buf_size_WORD	word2
-	uint32_t reserved3;
+	uint32_t buffer_size;				/* Version 1 Only */
 };
 
 struct lpfc_mbx_rq_create {
@@ -1062,16 +1110,16 @@ struct lpfc_mbx_rq_destroy {
 
 struct mq_context {
 	uint32_t word0;
-#define lpfc_mq_context_cq_id_SHIFT	22
+#define lpfc_mq_context_cq_id_SHIFT	22 	/* Version 0 Only */
 #define lpfc_mq_context_cq_id_MASK	0x000003FF
 #define lpfc_mq_context_cq_id_WORD	word0
-#define lpfc_mq_context_count_SHIFT	16
-#define lpfc_mq_context_count_MASK	0x0000000F
-#define lpfc_mq_context_count_WORD	word0
-#define LPFC_MQ_CNT_16		0x5
-#define LPFC_MQ_CNT_32		0x6
-#define LPFC_MQ_CNT_64		0x7
-#define LPFC_MQ_CNT_128		0x8
+#define lpfc_mq_context_ring_size_SHIFT	16
+#define lpfc_mq_context_ring_size_MASK	0x0000000F
+#define lpfc_mq_context_ring_size_WORD	word0
+#define LPFC_MQ_RING_SIZE_16		0x5
+#define LPFC_MQ_RING_SIZE_32		0x6
+#define LPFC_MQ_RING_SIZE_64		0x7
+#define LPFC_MQ_RING_SIZE_128		0x8
 	uint32_t word1;
 #define lpfc_mq_context_valid_SHIFT	31
 #define lpfc_mq_context_valid_MASK	0x00000001
@@ -1105,9 +1153,12 @@ struct lpfc_mbx_mq_create_ext {
 	union {
 		struct {
 			uint32_t word0;
-#define lpfc_mbx_mq_create_ext_num_pages_SHIFT		0
-#define lpfc_mbx_mq_create_ext_num_pages_MASK		0x0000FFFF
-#define lpfc_mbx_mq_create_ext_num_pages_WORD		word0
+#define lpfc_mbx_mq_create_ext_num_pages_SHIFT	0
+#define lpfc_mbx_mq_create_ext_num_pages_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_ext_num_pages_WORD	word0
+#define lpfc_mbx_mq_create_ext_cq_id_SHIFT	16	/* Version 1 Only */
+#define lpfc_mbx_mq_create_ext_cq_id_MASK	0x0000FFFF
+#define lpfc_mbx_mq_create_ext_cq_id_WORD	word0
 			uint32_t async_evt_bmap;
 #define lpfc_mbx_mq_create_ext_async_evt_link_SHIFT	LPFC_TRAILER_CODE_LINK
 #define lpfc_mbx_mq_create_ext_async_evt_link_MASK	0x00000001
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 35665cfb..505f884 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2010 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -507,7 +507,10 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	phba->hba_flag &= ~HBA_ERATT_HANDLED;
 
 	/* Enable appropriate host interrupts */
-	status = readl(phba->HCregaddr);
+	if (lpfc_readl(phba->HCregaddr, &status)) {
+		spin_unlock_irq(&phba->hbalock);
+		return -EIO;
+	}
 	status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
 	if (psli->num_rings > 0)
 		status |= HC_R0INT_ENA;
@@ -1222,7 +1225,10 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	/* Wait for the ER1 bit to clear.*/
 	while (phba->work_hs & HS_FFER1) {
 		msleep(100);
-		phba->work_hs = readl(phba->HSregaddr);
+		if (lpfc_readl(phba->HSregaddr, &phba->work_hs)) {
+			phba->work_hs = UNPLUG_ERR ;
+			break;
+		}
 		/* If driver is unloading let the worker thread continue */
 		if (phba->pport->load_flag & FC_UNLOADING) {
 			phba->work_hs = 0;
@@ -4460,7 +4466,7 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * lpfc_init_api_table_setup - Set up init api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -4474,6 +4480,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 {
 	phba->lpfc_hba_init_link = lpfc_hba_init_link;
 	phba->lpfc_hba_down_link = lpfc_hba_down_link;
+	phba->lpfc_selective_reset = lpfc_selective_reset;
 	switch (dev_grp) {
 	case LPFC_PCI_DEV_LP:
 		phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
@@ -4843,7 +4850,7 @@ out_free_mem:
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -5385,13 +5392,16 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
 	int i, port_error = 0;
 	uint32_t if_type;
 
+	memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
+	memset(&reg_data, 0, sizeof(reg_data));
 	if (!phba->sli4_hba.PSMPHRregaddr)
 		return -ENODEV;
 
 	/* Wait up to 30 seconds for the SLI Port POST done and ready */
 	for (i = 0; i < 3000; i++) {
-		portsmphr_reg.word0 = readl(phba->sli4_hba.PSMPHRregaddr);
-		if (bf_get(lpfc_port_smphr_perr, &portsmphr_reg)) {
+		if (lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
+			&portsmphr_reg.word0) ||
+			(bf_get(lpfc_port_smphr_perr, &portsmphr_reg))) {
 			/* Port has a fatal POST error, break out */
 			port_error = -ENODEV;
 			break;
@@ -5472,9 +5482,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
 			break;
 		case LPFC_SLI_INTF_IF_TYPE_2:
 			/* Final checks.  The port status should be clean. */
-			reg_data.word0 =
-				readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
-			if (bf_get(lpfc_sliport_status_err, &reg_data)) {
+			if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+				&reg_data.word0) ||
+				bf_get(lpfc_sliport_status_err, &reg_data)) {
 				phba->work_status[0] =
 					readl(phba->sli4_hba.u.if_type2.
 					      ERR1regaddr);
@@ -5720,7 +5730,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5825,7 +5835,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5884,7 +5894,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -6179,7 +6189,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static void
@@ -6243,7 +6253,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -6488,7 +6498,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 void
@@ -6533,7 +6543,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  **/
 static int
 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
@@ -6694,7 +6704,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -6760,9 +6770,11 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 			 * the loop again.
 			 */
 			for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
-				reg_data.word0 =
-					readl(phba->sli4_hba.u.if_type2.
-					      STATUSregaddr);
+				if (lpfc_readl(phba->sli4_hba.u.if_type2.
+					      STATUSregaddr, &reg_data.word0)) {
+					rc = -ENODEV;
+					break;
+				}
 				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
 					break;
 				if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
@@ -6783,8 +6795,11 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 			}
 
 			/* Detect any port errors. */
-			reg_data.word0 = readl(phba->sli4_hba.u.if_type2.
-					       STATUSregaddr);
+			if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+				 &reg_data.word0)) {
+				rc = -ENODEV;
+				break;
+			}
 			if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
 			    (rdy_chk >= 1000)) {
 				phba->work_status[0] = readl(
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index dba32df..fbab973 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1834,7 +1834,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * @fcf_index: index to fcf table.
  *
  * This routine routine allocates and constructs non-embedded mailbox command
- * for reading a FCF table entry refered by @fcf_index.
+ * for reading a FCF table entry referred by @fcf_index.
  *
  * Return: pointer to the mailbox command constructed if successful, otherwise
  * NULL.
diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h
index f3cfbe2..f2b1bbc 100644
--- a/drivers/scsi/lpfc/lpfc_nl.h
+++ b/drivers/scsi/lpfc/lpfc_nl.h
@@ -50,7 +50,7 @@
  * and subcategory. The event type must come first.
  * The subcategory further defines the data that follows in the rest
  * of the payload. Each category will have its own unique header plus
- * any addtional data unique to the subcategory.
+ * any additional data unique to the subcategory.
  * The payload sent via the fc transport is one-way driver->application.
  */
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 52b3515..0d92d42 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -658,7 +658,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	return 0;
 }
 /**
- * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd.
+ * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd.
  * @phba : Pointer to lpfc_hba structure.
  * @vport: Pointer to lpfc_vport structure.
  * @rpi  : rpi to be release.
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index bf34178..fe7cc84 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -577,7 +577,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 			iocb->un.fcpi64.bdl.addrHigh = 0;
 			iocb->ulpBdeCount = 0;
 			iocb->ulpLe = 0;
-			/* fill in responce BDE */
+			/* fill in response BDE */
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
 							BUFF_TYPE_BDE_64;
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
@@ -1217,10 +1217,10 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 				     (2 * sizeof(struct ulp_bde64)));
 			data_bde->addrHigh = putPaddrHigh(physaddr);
 			data_bde->addrLow = putPaddrLow(physaddr);
-			/* ebde count includes the responce bde and data bpl */
+			/* ebde count includes the response bde and data bpl */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
 		} else {
-			/* ebde count includes the responce bde and data bdes */
+			/* ebde count includes the response bde and data bdes */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
 		}
 	} else {
@@ -1514,10 +1514,11 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	struct scatterlist *sgpe = NULL; /* s/g prot entry */
 	struct lpfc_pde5 *pde5 = NULL;
 	struct lpfc_pde6 *pde6 = NULL;
-	struct ulp_bde64 *prot_bde = NULL;
+	struct lpfc_pde7 *pde7 = NULL;
 	dma_addr_t dataphysaddr, protphysaddr;
 	unsigned short curr_data = 0, curr_prot = 0;
-	unsigned int split_offset, protgroup_len;
+	unsigned int split_offset;
+	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
 	unsigned int protgrp_blks, protgrp_bytes;
 	unsigned int remainder, subtotal;
 	int status;
@@ -1585,23 +1586,33 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		bpl++;
 
 		/* setup the first BDE that points to protection buffer */
-		prot_bde = (struct ulp_bde64 *) bpl;
-		protphysaddr = sg_dma_address(sgpe);
-		prot_bde->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr));
-		prot_bde->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr));
-		protgroup_len = sg_dma_len(sgpe);
+		protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
+		protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
 
 		/* must be integer multiple of the DIF block length */
 		BUG_ON(protgroup_len % 8);
 
+		pde7 = (struct lpfc_pde7 *) bpl;
+		memset(pde7, 0, sizeof(struct lpfc_pde7));
+		bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR);
+
+		pde7->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr));
+		pde7->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr));
+
 		protgrp_blks = protgroup_len / 8;
 		protgrp_bytes = protgrp_blks * blksize;
 
-		prot_bde->tus.f.bdeSize = protgroup_len;
-		prot_bde->tus.f.bdeFlags = LPFC_PDE7_DESCRIPTOR;
-		prot_bde->tus.w = le32_to_cpu(bpl->tus.w);
+		/* check if this pde is crossing the 4K boundary; if so split */
+		if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) {
+			protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff);
+			protgroup_offset += protgroup_remainder;
+			protgrp_blks = protgroup_remainder / 8;
+			protgrp_bytes = protgroup_remainder * blksize;
+		} else {
+			protgroup_offset = 0;
+			curr_prot++;
+		}
 
-		curr_prot++;
 		num_bde++;
 
 		/* setup BDE's for data blocks associated with DIF data */
@@ -1653,6 +1664,13 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 		}
 
+		if (protgroup_offset) {
+			/* update the reference tag */
+			reftag += protgrp_blks;
+			bpl++;
+			continue;
+		}
+
 		/* are we done ? */
 		if (curr_prot == protcnt) {
 			alldone = 1;
@@ -1675,6 +1693,7 @@ out:
 
 	return num_bde;
 }
+
 /*
  * Given a SCSI command that supports DIF, determine composition of protection
  * groups involved in setting up buffer lists
@@ -2361,7 +2380,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		}
 		/*
 		 * The cmnd->underflow is the minimum number of bytes that must
-		 * be transfered for this command.  Provided a sense condition
+		 * be transferred for this command.  Provided a sense condition
 		 * is not present, make sure the actual amount transferred is at
 		 * least the underflow value or fail.
 		 */
@@ -2854,7 +2873,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * lpfc_scsi_api_table_setup - Set up scsi api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 5932273..ce645b2 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -130,7 +130,7 @@ struct lpfc_scsi_buf {
 	dma_addr_t nonsg_phys;	/* Non scatter-gather physical address. */
 
 	/*
-	 * data and dma_handle are the kernel virutal and bus address of the
+	 * data and dma_handle are the kernel virtual and bus address of the
 	 * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
 	 * gather bde list that supports the sg_tablesize value.
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 2ee0374..dacabbe 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -2817,7 +2817,7 @@ void lpfc_poll_eratt(unsigned long ptr)
  * This function is called from the interrupt context when there is a ring
  * event for the fcp ring. The caller does not hold any lock.
  * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
+ * finds an iocb with LE bit set and chains all the iocbs up to the iocb with
  * LE bit set. The function will call the completion handler of the command iocb
  * if the response iocb indicates a completion for a command iocb or it is
  * an abort completion. The function will call lpfc_sli_process_unsol_iocb
@@ -3477,7 +3477,8 @@ lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 	int retval = 0;
 
 	/* Read the HBA Host Status Register */
-	status = readl(phba->HSregaddr);
+	if (lpfc_readl(phba->HSregaddr, &status))
+		return 1;
 
 	/*
 	 * Check status register every 100ms for 5 retries, then every
@@ -3502,7 +3503,10 @@ lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
 			lpfc_sli_brdrestart(phba);
 		}
 		/* Read the HBA Host Status Register */
-		status = readl(phba->HSregaddr);
+		if (lpfc_readl(phba->HSregaddr, &status)) {
+			retval = 1;
+			break;
+		}
 	}
 
 	/* Check to see if any errors occurred during init */
@@ -3584,7 +3588,7 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 	uint32_t __iomem *resp_buf;
 	uint32_t __iomem *mbox_buf;
 	volatile uint32_t mbox;
-	uint32_t hc_copy;
+	uint32_t hc_copy, ha_copy, resp_data;
 	int  i;
 	uint8_t hdrtype;
 
@@ -3601,12 +3605,15 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 	resp_buf = phba->MBslimaddr;
 
 	/* Disable the error attention */
-	hc_copy = readl(phba->HCregaddr);
+	if (lpfc_readl(phba->HCregaddr, &hc_copy))
+		return;
 	writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
 	readl(phba->HCregaddr); /* flush */
 	phba->link_flag |= LS_IGNORE_ERATT;
 
-	if (readl(phba->HAregaddr) & HA_ERATT) {
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		return;
+	if (ha_copy & HA_ERATT) {
 		/* Clear Chip error bit */
 		writel(HA_ERATT, phba->HAregaddr);
 		phba->pport->stopped = 1;
@@ -3620,11 +3627,18 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 	mbox_buf = phba->MBslimaddr;
 	writel(mbox, mbox_buf);
 
-	for (i = 0;
-	     readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
-		mdelay(1);
-
-	if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
+	for (i = 0; i < 50; i++) {
+		if (lpfc_readl((resp_buf + 1), &resp_data))
+			return;
+		if (resp_data != ~(BARRIER_TEST_PATTERN))
+			mdelay(1);
+		else
+			break;
+	}
+	resp_data = 0;
+	if (lpfc_readl((resp_buf + 1), &resp_data))
+		return;
+	if (resp_data  != ~(BARRIER_TEST_PATTERN)) {
 		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
 		    phba->pport->stopped)
 			goto restore_hc;
@@ -3633,13 +3647,26 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
 	}
 
 	((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
-	for (i = 0; readl(resp_buf) != mbox &&  i < 500; i++)
-		mdelay(1);
+	resp_data = 0;
+	for (i = 0; i < 500; i++) {
+		if (lpfc_readl(resp_buf, &resp_data))
+			return;
+		if (resp_data != mbox)
+			mdelay(1);
+		else
+			break;
+	}
 
 clear_errat:
 
-	while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
-		mdelay(1);
+	while (++i < 500) {
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return;
+		if (!(ha_copy & HA_ERATT))
+			mdelay(1);
+		else
+			break;
+	}
 
 	if (readl(phba->HAregaddr) & HA_ERATT) {
 		writel(HA_ERATT, phba->HAregaddr);
@@ -3686,7 +3713,11 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 
 	/* Disable the error attention */
 	spin_lock_irq(&phba->hbalock);
-	status = readl(phba->HCregaddr);
+	if (lpfc_readl(phba->HCregaddr, &status)) {
+		spin_unlock_irq(&phba->hbalock);
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return 1;
+	}
 	status &= ~HC_ERINT_ENA;
 	writel(status, phba->HCregaddr);
 	readl(phba->HCregaddr); /* flush */
@@ -3720,11 +3751,12 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 	 * 3 seconds we still set HBA_ERROR state because the status of the
 	 * board is now undefined.
 	 */
-	ha_copy = readl(phba->HAregaddr);
-
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		return 1;
 	while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
 		mdelay(100);
-		ha_copy = readl(phba->HAregaddr);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return 1;
 	}
 
 	del_timer_sync(&psli->mbox_tmo);
@@ -4018,7 +4050,8 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba)
 	uint32_t status, i = 0;
 
 	/* Read the HBA Host Status Register */
-	status = readl(phba->HSregaddr);
+	if (lpfc_readl(phba->HSregaddr, &status))
+		return -EIO;
 
 	/* Check status register to see what current state is */
 	i = 0;
@@ -4073,7 +4106,8 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba)
 			lpfc_sli_brdrestart(phba);
 		}
 		/* Read the HBA Host Status Register */
-		status = readl(phba->HSregaddr);
+		if (lpfc_readl(phba->HSregaddr, &status))
+			return -EIO;
 	}
 
 	/* Check to see if any errors occurred during init */
@@ -5083,7 +5117,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 
 	/* Setting state unknown so lpfc_sli_abort_iocb_ring
 	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
-	 * it to fail all oustanding SCSI IO.
+	 * it to fail all outstanding SCSI IO.
 	 */
 	spin_lock_irq(&phba->pport->work_port_lock);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
@@ -5136,7 +5170,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli = &phba->sli;
 	uint32_t status, evtctr;
-	uint32_t ha_copy;
+	uint32_t ha_copy, hc_copy;
 	int i;
 	unsigned long timeout;
 	unsigned long drvr_flag = 0;
@@ -5202,15 +5236,17 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 		goto out_not_finished;
 	}
 
-	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
-	    !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
-		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+	if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
+		if (lpfc_readl(phba->HCregaddr, &hc_copy) ||
+			!(hc_copy & HC_MBINT_ENA)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 				"(%d):2528 Mailbox command x%x cannot "
 				"issue Data: x%x x%x\n",
 				pmbox->vport ? pmbox->vport->vpi : 0,
 				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
-		goto out_not_finished;
+			goto out_not_finished;
+		}
 	}
 
 	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
@@ -5408,11 +5444,19 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 			word0 = le32_to_cpu(word0);
 		} else {
 			/* First read mbox status word */
-			word0 = readl(phba->MBslimaddr);
+			if (lpfc_readl(phba->MBslimaddr, &word0)) {
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				goto out_not_finished;
+			}
 		}
 
 		/* Read the HBA Host Attention Register */
-		ha_copy = readl(phba->HAregaddr);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy)) {
+			spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+			goto out_not_finished;
+		}
 		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
 							     mb->mbxCommand) *
 					   1000) + jiffies;
@@ -5463,7 +5507,11 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 				word0 = readl(phba->MBslimaddr);
 			}
 			/* Read the HBA Host Attention Register */
-			ha_copy = readl(phba->HAregaddr);
+			if (lpfc_readl(phba->HAregaddr, &ha_copy)) {
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				goto out_not_finished;
+			}
 		}
 
 		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
@@ -5983,7 +6031,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 }
 
 /**
- * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * lpfc_mbox_api_table_setup - Set up mbox api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -6263,7 +6311,6 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 				bf_set(lpfc_sli4_sge_last, sgl, 1);
 			else
 				bf_set(lpfc_sli4_sge_last, sgl, 0);
-			sgl->word2 = cpu_to_le32(sgl->word2);
 			/* swap the size field back to the cpu so we
 			 * can assign it to the sgl.
 			 */
@@ -6283,6 +6330,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 				bf_set(lpfc_sli4_sge_offset, sgl, offset);
 				offset += bde.tus.f.bdeSize;
 			}
+			sgl->word2 = cpu_to_le32(sgl->word2);
 			bpl++;
 			sgl++;
 		}
@@ -6528,9 +6576,9 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
 			sizeof(struct ulp_bde64);
 		for (i = 0; i < numBdes; i++) {
-			if (bpl[i].tus.f.bdeFlags != BUFF_TYPE_BDE_64)
-				break;
 			bde.tus.w = le32_to_cpu(bpl[i].tus.w);
+			if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
+				break;
 			xmit_len += bde.tus.f.bdeSize;
 		}
 		/* word3 iocb=IO_TAG wqe=request_payload_len */
@@ -6620,15 +6668,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		xritag = 0;
 	break;
 	case CMD_XMIT_BLS_RSP64_CX:
-		/* As BLS ABTS-ACC WQE is very different from other WQEs,
+		/* As BLS ABTS RSP WQE is very different from other WQEs,
 		 * we re-construct this WQE here based on information in
 		 * iocbq from scratch.
 		 */
 		memset(wqe, 0, sizeof(union lpfc_wqe));
 		/* OX_ID is invariable to who sent ABTS to CT exchange */
 		bf_set(xmit_bls_rsp64_oxid, &wqe->xmit_bls_rsp,
-		       bf_get(lpfc_abts_oxid, &iocbq->iocb.un.bls_acc));
-		if (bf_get(lpfc_abts_orig, &iocbq->iocb.un.bls_acc) ==
+		       bf_get(lpfc_abts_oxid, &iocbq->iocb.un.bls_rsp));
+		if (bf_get(lpfc_abts_orig, &iocbq->iocb.un.bls_rsp) ==
 		    LPFC_ABTS_UNSOL_INT) {
 			/* ABTS sent by initiator to CT exchange, the
 			 * RX_ID field will be filled with the newly
@@ -6642,7 +6690,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 			 * RX_ID from ABTS.
 			 */
 			bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
-			       bf_get(lpfc_abts_rxid, &iocbq->iocb.un.bls_acc));
+			       bf_get(lpfc_abts_rxid, &iocbq->iocb.un.bls_rsp));
 		}
 		bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
 		bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
@@ -6653,6 +6701,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		       LPFC_WQE_LENLOC_NONE);
 		/* Overwrite the pre-set comnd type with OTHER_COMMAND */
 		command_type = OTHER_COMMAND;
+		if (iocbq->iocb.un.xseq64.w5.hcsw.Rctl == FC_RCTL_BA_RJT) {
+			bf_set(xmit_bls_rsp64_rjt_vspec, &wqe->xmit_bls_rsp,
+			       bf_get(lpfc_vndr_code, &iocbq->iocb.un.bls_rsp));
+			bf_set(xmit_bls_rsp64_rjt_expc, &wqe->xmit_bls_rsp,
+			       bf_get(lpfc_rsn_expln, &iocbq->iocb.un.bls_rsp));
+			bf_set(xmit_bls_rsp64_rjt_rsnc, &wqe->xmit_bls_rsp,
+			       bf_get(lpfc_rsn_code, &iocbq->iocb.un.bls_rsp));
+		}
+
 	break;
 	case CMD_XRI_ABORTED_CX:
 	case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
@@ -6701,7 +6758,8 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 
 	if (piocb->sli4_xritag == NO_XRI) {
 		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
-		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN ||
+		    piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX)
 			sglq = NULL;
 		else {
 			if (pring->txq_cnt) {
@@ -6789,7 +6847,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 }
 
 /**
- * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * lpfc_sli_api_table_setup - Set up sli api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -7463,7 +7521,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on tag */
+	/* Search postbufq, from the beginning, looking for a match on tag */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->buffer_tag == tag) {
@@ -7507,7 +7565,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on phys */
+	/* Search postbufq, from the beginning, looking for a match on phys */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->phys == phys) {
@@ -8194,7 +8252,8 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 	piocb->iocb_flag &= ~LPFC_IO_WAKE;
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val))
+			return IOCB_ERROR;
 		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -8236,7 +8295,8 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 	}
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-		creg_val = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &creg_val))
+			return IOCB_ERROR;
 		creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
 		writel(creg_val, phba->HCregaddr);
 		readl(phba->HCregaddr); /* flush */
@@ -8378,7 +8438,7 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8387,10 +8447,13 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba)
 	uint32_t ha_copy;
 
 	/* Read chip Host Attention (HA) register */
-	ha_copy = readl(phba->HAregaddr);
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		goto unplug_err;
+
 	if (ha_copy & HA_ERATT) {
 		/* Read host status register to retrieve error event */
-		lpfc_sli_read_hs(phba);
+		if (lpfc_sli_read_hs(phba))
+			goto unplug_err;
 
 		/* Check if there is a deferred error condition is active */
 		if ((HS_FFER1 & phba->work_hs) &&
@@ -8409,6 +8472,15 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba)
 		return 1;
 	}
 	return 0;
+
+unplug_err:
+	/* Set the driver HS work bitmap */
+	phba->work_hs |= UNPLUG_ERR;
+	/* Set the driver HA work bitmap */
+	phba->work_ha |= HA_ERATT;
+	/* Indicate polling handles this ERATT */
+	phba->hba_flag |= HBA_ERATT_HANDLED;
+	return 1;
 }
 
 /**
@@ -8419,7 +8491,7 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba)
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8436,8 +8508,15 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
 	switch (if_type) {
 	case LPFC_SLI_INTF_IF_TYPE_0:
-		uerr_sta_lo = readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
-		uerr_sta_hi = readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
+		if (lpfc_readl(phba->sli4_hba.u.if_type0.UERRLOregaddr,
+			&uerr_sta_lo) ||
+			lpfc_readl(phba->sli4_hba.u.if_type0.UERRHIregaddr,
+			&uerr_sta_hi)) {
+			phba->work_hs |= UNPLUG_ERR;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
 		if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
 		    (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -8456,9 +8535,15 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 		}
 		break;
 	case LPFC_SLI_INTF_IF_TYPE_2:
-		portstat_reg.word0 =
-			readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
-		portsmphr = readl(phba->sli4_hba.PSMPHRregaddr);
+		if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+			&portstat_reg.word0) ||
+			lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
+			&portsmphr)){
+			phba->work_hs |= UNPLUG_ERR;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
 		if (bf_get(lpfc_sliport_status_err, &portstat_reg)) {
 			phba->work_status[0] =
 				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
@@ -8496,7 +8581,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
  * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 int
@@ -8639,7 +8724,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 			return IRQ_NONE;
 		/* Need to read HA REG for slow-path events */
 		spin_lock_irqsave(&phba->hbalock, iflag);
-		ha_copy = readl(phba->HAregaddr);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			goto unplug_error;
 		/* If somebody is waiting to handle an eratt don't process it
 		 * here. The brdkill function will do this.
 		 */
@@ -8665,7 +8751,9 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 		}
 
 		/* Clear up only attention source related to slow-path */
-		hc_copy = readl(phba->HCregaddr);
+		if (lpfc_readl(phba->HCregaddr, &hc_copy))
+			goto unplug_error;
+
 		writel(hc_copy & ~(HC_MBINT_ENA | HC_R2INT_ENA |
 			HC_LAINT_ENA | HC_ERINT_ENA),
 			phba->HCregaddr);
@@ -8688,7 +8776,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 				 */
 				spin_lock_irqsave(&phba->hbalock, iflag);
 				phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
-				control = readl(phba->HCregaddr);
+				if (lpfc_readl(phba->HCregaddr, &control))
+					goto unplug_error;
 				control &= ~HC_LAINT_ENA;
 				writel(control, phba->HCregaddr);
 				readl(phba->HCregaddr); /* flush */
@@ -8708,7 +8797,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 			status >>= (4*LPFC_ELS_RING);
 			if (status & HA_RXMASK) {
 				spin_lock_irqsave(&phba->hbalock, iflag);
-				control = readl(phba->HCregaddr);
+				if (lpfc_readl(phba->HCregaddr, &control))
+					goto unplug_error;
 
 				lpfc_debugfs_slow_ring_trc(phba,
 				"ISR slow ring:   ctl:x%x stat:x%x isrcnt:x%x",
@@ -8741,7 +8831,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 		}
 		spin_lock_irqsave(&phba->hbalock, iflag);
 		if (work_ha_copy & HA_ERATT) {
-			lpfc_sli_read_hs(phba);
+			if (lpfc_sli_read_hs(phba))
+				goto unplug_error;
 			/*
 			 * Check if there is a deferred error condition
 			 * is active
@@ -8872,6 +8963,9 @@ send_current_mbox:
 		lpfc_worker_wake_up(phba);
 	}
 	return IRQ_HANDLED;
+unplug_error:
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return IRQ_HANDLED;
 
 } /* lpfc_sli_sp_intr_handler */
 
@@ -8919,7 +9013,8 @@ lpfc_sli_fp_intr_handler(int irq, void *dev_id)
 		if (lpfc_intr_state_check(phba))
 			return IRQ_NONE;
 		/* Need to read HA REG for FCP ring and other ring events */
-		ha_copy = readl(phba->HAregaddr);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return IRQ_HANDLED;
 		/* Clear up only attention source related to fast-path */
 		spin_lock_irqsave(&phba->hbalock, iflag);
 		/*
@@ -9004,7 +9099,11 @@ lpfc_sli_intr_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	spin_lock(&phba->hbalock);
-	phba->ha_copy = readl(phba->HAregaddr);
+	if (lpfc_readl(phba->HAregaddr, &phba->ha_copy)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_HANDLED;
+	}
+
 	if (unlikely(!phba->ha_copy)) {
 		spin_unlock(&phba->hbalock);
 		return IRQ_NONE;
@@ -9026,7 +9125,10 @@ lpfc_sli_intr_handler(int irq, void *dev_id)
 	}
 
 	/* Clear attention sources except link and error attentions */
-	hc_copy = readl(phba->HCregaddr);
+	if (lpfc_readl(phba->HCregaddr, &hc_copy)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_HANDLED;
+	}
 	writel(hc_copy & ~(HC_MBINT_ENA | HC_R0INT_ENA | HC_R1INT_ENA
 		| HC_R2INT_ENA | HC_LAINT_ENA | HC_ERINT_ENA),
 		phba->HCregaddr);
@@ -9582,7 +9684,7 @@ out:
  * @cq: Pointer to the completion queue.
  * @wcqe: Pointer to a completion queue entry.
  *
- * This routine process a slow-path work-queue or recieve queue completion queue
+ * This routine process a slow-path work-queue or receive queue completion queue
  * entry.
  *
  * Return: true if work posted to worker thread, otherwise false.
@@ -10403,7 +10505,6 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	if (!phba->sli4_hba.pc_sli4_params.supported)
 		hw_page_size = SLI4_PAGE_SIZE;
 
-
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -10413,11 +10514,22 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 			 LPFC_MBOX_OPCODE_CQ_CREATE,
 			 length, LPFC_SLI4_MBX_EMBED);
 	cq_create = &mbox->u.mqe.un.cq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
 	bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
 		    cq->page_count);
 	bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
 	bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
-	bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.cqv);
+	if (phba->sli4_hba.pc_sli4_params.cqv == LPFC_Q_CREATE_VERSION_2) {
+		bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request,
+		       (PAGE_SIZE/SLI4_PAGE_SIZE));
+		bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
+		       eq->queue_id);
+	} else {
+		bf_set(lpfc_cq_eq_id, &cq_create->u.request.context,
+		       eq->queue_id);
+	}
 	switch (cq->entry_count) {
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -10449,7 +10561,6 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
 
 	/* The IOCTL status is embedded in the mailbox subheader. */
-	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
 	if (shdr_status || shdr_add_status || rc) {
@@ -10515,20 +10626,20 @@ lpfc_mq_create_fb_init(struct lpfc_hba *phba, struct lpfc_queue *mq,
 	bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
 	switch (mq->entry_count) {
 	case 16:
-		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
-		       LPFC_MQ_CNT_16);
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_16);
 		break;
 	case 32:
-		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
-		       LPFC_MQ_CNT_32);
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_32);
 		break;
 	case 64:
-		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
-		       LPFC_MQ_CNT_64);
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_64);
 		break;
 	case 128:
-		bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
-		       LPFC_MQ_CNT_128);
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_128);
 		break;
 	}
 	list_for_each_entry(dmabuf, &mq->page_list, list) {
@@ -10586,6 +10697,7 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 			 length, LPFC_SLI4_MBX_EMBED);
 
 	mq_create_ext = &mbox->u.mqe.un.mq_create_ext;
+	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create_ext->header.cfg_shdr;
 	bf_set(lpfc_mbx_mq_create_ext_num_pages,
 	       &mq_create_ext->u.request, mq->page_count);
 	bf_set(lpfc_mbx_mq_create_ext_async_evt_link,
@@ -10598,9 +10710,15 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 	       &mq_create_ext->u.request, 1);
 	bf_set(lpfc_mbx_mq_create_ext_async_evt_sli,
 	       &mq_create_ext->u.request, 1);
-	bf_set(lpfc_mq_context_cq_id,
-	       &mq_create_ext->u.request.context, cq->queue_id);
 	bf_set(lpfc_mq_context_valid, &mq_create_ext->u.request.context, 1);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.mqv);
+	if (phba->sli4_hba.pc_sli4_params.mqv == LPFC_Q_CREATE_VERSION_1)
+		bf_set(lpfc_mbx_mq_create_ext_cq_id, &mq_create_ext->u.request,
+		       cq->queue_id);
+	else
+		bf_set(lpfc_mq_context_cq_id, &mq_create_ext->u.request.context,
+		       cq->queue_id);
 	switch (mq->entry_count) {
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -10610,20 +10728,24 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 			return -EINVAL;
 		/* otherwise default to smallest count (drop through) */
 	case 16:
-		bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context,
-		       LPFC_MQ_CNT_16);
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_16);
 		break;
 	case 32:
-		bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context,
-		       LPFC_MQ_CNT_32);
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_32);
 		break;
 	case 64:
-		bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context,
-		       LPFC_MQ_CNT_64);
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_64);
 		break;
 	case 128:
-		bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context,
-		       LPFC_MQ_CNT_128);
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_128);
 		break;
 	}
 	list_for_each_entry(dmabuf, &mq->page_list, list) {
@@ -10634,7 +10756,6 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 					putPaddrHigh(dmabuf->phys);
 	}
 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
-	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create_ext->header.cfg_shdr;
 	mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id,
 			      &mq_create_ext->u.response);
 	if (rc != MBX_SUCCESS) {
@@ -10711,6 +10832,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 	uint32_t shdr_status, shdr_add_status;
 	union lpfc_sli4_cfg_shdr *shdr;
 	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+	struct dma_address *page;
 
 	if (!phba->sli4_hba.pc_sli4_params.supported)
 		hw_page_size = SLI4_PAGE_SIZE;
@@ -10724,20 +10846,42 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 			 LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
 			 length, LPFC_SLI4_MBX_EMBED);
 	wq_create = &mbox->u.mqe.un.wq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
 	bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
 		    wq->page_count);
 	bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
 		    cq->queue_id);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.wqv);
+	if (phba->sli4_hba.pc_sli4_params.wqv == LPFC_Q_CREATE_VERSION_1) {
+		bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
+		       wq->entry_count);
+		switch (wq->entry_size) {
+		default:
+		case 64:
+			bf_set(lpfc_mbx_wq_create_wqe_size,
+			       &wq_create->u.request_1,
+			       LPFC_WQ_WQE_SIZE_64);
+			break;
+		case 128:
+			bf_set(lpfc_mbx_wq_create_wqe_size,
+			       &wq_create->u.request_1,
+			       LPFC_WQ_WQE_SIZE_128);
+			break;
+		}
+		bf_set(lpfc_mbx_wq_create_page_size, &wq_create->u.request_1,
+		       (PAGE_SIZE/SLI4_PAGE_SIZE));
+		page = wq_create->u.request_1.page;
+	} else {
+		page = wq_create->u.request.page;
+	}
 	list_for_each_entry(dmabuf, &wq->page_list, list) {
 		memset(dmabuf->virt, 0, hw_page_size);
-		wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
-					putPaddrLow(dmabuf->phys);
-		wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
-					putPaddrHigh(dmabuf->phys);
+		page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys);
+		page[dmabuf->buffer_tag].addr_hi = putPaddrHigh(dmabuf->phys);
 	}
 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
 	/* The IOCTL status is embedded in the mailbox subheader. */
-	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
 	if (shdr_status || shdr_add_status || rc) {
@@ -10815,37 +10959,51 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
 			 length, LPFC_SLI4_MBX_EMBED);
 	rq_create = &mbox->u.mqe.un.rq_create;
-	switch (hrq->entry_count) {
-	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2535 Unsupported RQ count. (%d)\n",
-				hrq->entry_count);
-		if (hrq->entry_count < 512)
-			return -EINVAL;
-		/* otherwise default to smallest count (drop through) */
-	case 512:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_512);
-		break;
-	case 1024:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_1024);
-		break;
-	case 2048:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_2048);
-		break;
-	case 4096:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_4096);
-		break;
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.rqv);
+	if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
+		bf_set(lpfc_rq_context_rqe_count_1,
+		       &rq_create->u.request.context,
+		       hrq->entry_count);
+		rq_create->u.request.context.buffer_size = LPFC_HDR_BUF_SIZE;
+	} else {
+		switch (hrq->entry_count) {
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2535 Unsupported RQ count. (%d)\n",
+					hrq->entry_count);
+			if (hrq->entry_count < 512)
+				return -EINVAL;
+			/* otherwise default to smallest count (drop through) */
+		case 512:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_512);
+			break;
+		case 1024:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_1024);
+			break;
+		case 2048:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_2048);
+			break;
+		case 4096:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_4096);
+			break;
+		}
+		bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+		       LPFC_HDR_BUF_SIZE);
 	}
 	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
 	       cq->queue_id);
 	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
 	       hrq->page_count);
-	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
-	       LPFC_HDR_BUF_SIZE);
 	list_for_each_entry(dmabuf, &hrq->page_list, list) {
 		memset(dmabuf->virt, 0, hw_page_size);
 		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
@@ -10855,7 +11013,6 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 	}
 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
 	/* The IOCTL status is embedded in the mailbox subheader. */
-	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
 	if (shdr_status || shdr_add_status || rc) {
@@ -10881,37 +11038,50 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
 			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
 			 length, LPFC_SLI4_MBX_EMBED);
-	switch (drq->entry_count) {
-	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2536 Unsupported RQ count. (%d)\n",
-				drq->entry_count);
-		if (drq->entry_count < 512)
-			return -EINVAL;
-		/* otherwise default to smallest count (drop through) */
-	case 512:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_512);
-		break;
-	case 1024:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_1024);
-		break;
-	case 2048:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_2048);
-		break;
-	case 4096:
-		bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
-		       LPFC_RQ_RING_SIZE_4096);
-		break;
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.rqv);
+	if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
+		bf_set(lpfc_rq_context_rqe_count_1,
+		       &rq_create->u.request.context,
+		       hrq->entry_count);
+		rq_create->u.request.context.buffer_size = LPFC_DATA_BUF_SIZE;
+	} else {
+		switch (drq->entry_count) {
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2536 Unsupported RQ count. (%d)\n",
+					drq->entry_count);
+			if (drq->entry_count < 512)
+				return -EINVAL;
+			/* otherwise default to smallest count (drop through) */
+		case 512:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_512);
+			break;
+		case 1024:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_1024);
+			break;
+		case 2048:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_2048);
+			break;
+		case 4096:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_4096);
+			break;
+		}
+		bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+		       LPFC_DATA_BUF_SIZE);
 	}
 	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
 	       cq->queue_id);
 	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
 	       drq->page_count);
-	bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
-	       LPFC_DATA_BUF_SIZE);
 	list_for_each_entry(dmabuf, &drq->page_list, list) {
 		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
 					putPaddrLow(dmabuf->phys);
@@ -11580,6 +11750,7 @@ lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
 	static char *rctl_names[] = FC_RCTL_NAMES_INIT;
 	char *type_names[] = FC_TYPE_NAMES_INIT;
 	struct fc_vft_header *fc_vft_hdr;
+	uint32_t *header = (uint32_t *) fc_hdr;
 
 	switch (fc_hdr->fh_r_ctl) {
 	case FC_RCTL_DD_UNCAT:		/* uncategorized information */
@@ -11628,10 +11799,15 @@ lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
 	default:
 		goto drop;
 	}
+
 	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
-			"2538 Received frame rctl:%s type:%s\n",
+			"2538 Received frame rctl:%s type:%s "
+			"Frame Data:%08x %08x %08x %08x %08x %08x\n",
 			rctl_names[fc_hdr->fh_r_ctl],
-			type_names[fc_hdr->fh_type]);
+			type_names[fc_hdr->fh_type],
+			be32_to_cpu(header[0]), be32_to_cpu(header[1]),
+			be32_to_cpu(header[2]), be32_to_cpu(header[3]),
+			be32_to_cpu(header[4]), be32_to_cpu(header[5]));
 	return 0;
 drop:
 	lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
@@ -11928,17 +12104,17 @@ lpfc_sli4_abort_partial_seq(struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_sli4_seq_abort_acc_cmpl - Accept seq abort iocb complete handler
+ * lpfc_sli4_seq_abort_rsp_cmpl - BLS ABORT RSP seq abort iocb complete handler
  * @phba: Pointer to HBA context object.
  * @cmd_iocbq: pointer to the command iocbq structure.
  * @rsp_iocbq: pointer to the response iocbq structure.
  *
- * This function handles the sequence abort accept iocb command complete
+ * This function handles the sequence abort response iocb command complete
  * event. It properly releases the memory allocated to the sequence abort
  * accept iocb.
  **/
 static void
-lpfc_sli4_seq_abort_acc_cmpl(struct lpfc_hba *phba,
+lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
 			     struct lpfc_iocbq *cmd_iocbq,
 			     struct lpfc_iocbq *rsp_iocbq)
 {
@@ -11947,15 +12123,15 @@ lpfc_sli4_seq_abort_acc_cmpl(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli4_seq_abort_acc - Accept sequence abort
+ * lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort
  * @phba: Pointer to HBA context object.
  * @fc_hdr: pointer to a FC frame header.
  *
- * This function sends a basic accept to a previous unsol sequence abort
+ * This function sends a basic response to a previous unsol sequence abort
  * event after aborting the sequence handling.
  **/
 static void
-lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
+lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba,
 			struct fc_frame_header *fc_hdr)
 {
 	struct lpfc_iocbq *ctiocb = NULL;
@@ -11963,6 +12139,7 @@ lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
 	uint16_t oxid, rxid;
 	uint32_t sid, fctl;
 	IOCB_t *icmd;
+	int rc;
 
 	if (!lpfc_is_link_up(phba))
 		return;
@@ -11983,7 +12160,7 @@ lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
 		+ phba->sli4_hba.max_cfg_param.xri_base))
 		lpfc_set_rrq_active(phba, ndlp, rxid, oxid, 0);
 
-	/* Allocate buffer for acc iocb */
+	/* Allocate buffer for rsp iocb */
 	ctiocb = lpfc_sli_get_iocbq(phba);
 	if (!ctiocb)
 		return;
@@ -12008,32 +12185,54 @@ lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
 
 	ctiocb->iocb_cmpl = NULL;
 	ctiocb->vport = phba->pport;
-	ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_acc_cmpl;
+	ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_rsp_cmpl;
+	ctiocb->sli4_xritag = NO_XRI;
+
+	/* If the oxid maps to the FCP XRI range or if it is out of range,
+	 * send a BLS_RJT.  The driver no longer has that exchange.
+	 * Override the IOCB for a BA_RJT.
+	 */
+	if (oxid > (phba->sli4_hba.max_cfg_param.max_xri +
+		    phba->sli4_hba.max_cfg_param.xri_base) ||
+	    oxid > (lpfc_sli4_get_els_iocb_cnt(phba) +
+		    phba->sli4_hba.max_cfg_param.xri_base)) {
+		icmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_BA_RJT;
+		bf_set(lpfc_vndr_code, &icmd->un.bls_rsp, 0);
+		bf_set(lpfc_rsn_expln, &icmd->un.bls_rsp, FC_BA_RJT_INV_XID);
+		bf_set(lpfc_rsn_code, &icmd->un.bls_rsp, FC_BA_RJT_UNABLE);
+	}
 
 	if (fctl & FC_FC_EX_CTX) {
 		/* ABTS sent by responder to CT exchange, construction
 		 * of BA_ACC will use OX_ID from ABTS for the XRI_TAG
 		 * field and RX_ID from ABTS for RX_ID field.
 		 */
-		bf_set(lpfc_abts_orig, &icmd->un.bls_acc, LPFC_ABTS_UNSOL_RSP);
-		bf_set(lpfc_abts_rxid, &icmd->un.bls_acc, rxid);
-		ctiocb->sli4_xritag = oxid;
+		bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP);
+		bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid);
 	} else {
 		/* ABTS sent by initiator to CT exchange, construction
 		 * of BA_ACC will need to allocate a new XRI as for the
 		 * XRI_TAG and RX_ID fields.
 		 */
-		bf_set(lpfc_abts_orig, &icmd->un.bls_acc, LPFC_ABTS_UNSOL_INT);
-		bf_set(lpfc_abts_rxid, &icmd->un.bls_acc, NO_XRI);
-		ctiocb->sli4_xritag = NO_XRI;
+		bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT);
+		bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI);
 	}
-	bf_set(lpfc_abts_oxid, &icmd->un.bls_acc, oxid);
+	bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid);
 
-	/* Xmit CT abts accept on exchange <xid> */
+	/* Xmit CT abts response on exchange <xid> */
 	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
-			"1200 Xmit CT ABTS ACC on exchange x%x Data: x%x\n",
-			CMD_XMIT_BLS_RSP64_CX, phba->link_state);
-	lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
+			"1200 Send BLS cmd x%x on oxid x%x Data: x%x\n",
+			icmd->un.xseq64.w5.hcsw.Rctl, oxid, phba->link_state);
+
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
+	if (rc == IOCB_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
+				"2925 Failed to issue CT ABTS RSP x%x on "
+				"xri x%x, Data x%x\n",
+				icmd->un.xseq64.w5.hcsw.Rctl, oxid,
+				phba->link_state);
+		lpfc_sli_release_iocbq(phba, ctiocb);
+	}
 }
 
 /**
@@ -12081,7 +12280,7 @@ lpfc_sli4_handle_unsol_abort(struct lpfc_vport *vport,
 			lpfc_in_buf_free(phba, &dmabuf->dbuf);
 	}
 	/* Send basic accept (BA_ACC) to the abort requester */
-	lpfc_sli4_seq_abort_acc(phba, &fc_hdr);
+	lpfc_sli4_seq_abort_rsp(phba, &fc_hdr);
 }
 
 /**
@@ -12772,7 +12971,7 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
  * record and processing it one at a time starting from the @fcf_index
  * for initial FCF discovery or fast FCF failover rediscovery.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -12833,7 +13032,7 @@ fail_fcf_scan:
  * This routine is invoked to read an FCF record indicated by @fcf_index
  * and to use it for FLOGI roundrobin FCF failover.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -12879,7 +13078,7 @@ fail_fcf_read:
  * This routine is invoked to read an FCF record indicated by @fcf_index to
  * determine whether it's eligible for FLOGI roundrobin failover list.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 595056b..1a3cbf8 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2009 Emulex.  All rights reserved.                *
+ * Copyright (C) 2009-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 0a4d376..2404d1d 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.21"
+#define LPFC_DRIVER_VERSION "8.3.22"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"