[SCSI] lpfc 8.3.4: Consistently Implement persistent port disable

Consistently implement persistent port disable.

Ability was to be managed in the adapter via firmware via flash settings.
However, not all firmware images supported it. Uniformly support it
everywhere.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 files changed, 242 insertions, 32 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 8917bb2..7b63fe5 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -525,6 +525,7 @@ struct lpfc_hba {
 #define FCP_XRI_ABORT_EVENT	0x20
 #define ELS_XRI_ABORT_EVENT	0x40
 #define ASYNC_EVENT		0x80
+#define LINK_DISABLED		0x100 /* Link disabled by user */
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index fc07be5..7a62951 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -394,7 +394,12 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
 	case LPFC_INIT_MBX_CMDS:
 	case LPFC_LINK_DOWN:
 	case LPFC_HBA_ERROR:
-		len += snprintf(buf + len, PAGE_SIZE-len, "Link Down\n");
+		if (phba->hba_flag & LINK_DISABLED)
+			len += snprintf(buf + len, PAGE_SIZE-len,
+				"Link Down - User disabled\n");
+		else
+			len += snprintf(buf + len, PAGE_SIZE-len,
+				"Link Down\n");
 		break;
 	case LPFC_LINK_UP:
 	case LPFC_CLEAR_LA:
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index d2a9229..84e53bb 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -21,7 +21,9 @@
 typedef int (*node_filter)(struct lpfc_nodelist *, void *);
 
 struct fc_rport;
-void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+void lpfc_down_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_sli_read_link_ste(struct lpfc_hba *);
+void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t, uint16_t);
 void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
 int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
@@ -234,6 +236,7 @@ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
+void lpfc_sli_bemem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
 void lpfc_sli_flush_fcp_rings(struct lpfc_hba *);
 int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *,
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 8a3a026..ccb2672 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -2496,8 +2496,8 @@ typedef struct {
 #define  DMP_VPORT_REGION_SIZE	 0x200
 #define  DMP_MBOX_OFFSET_WORD	 0x5
 
-#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
-#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+#define  DMP_REGION_23	 	 0x17   /* fcoe param  and port state region */
+#define  DMP_RGN23_SIZE	 	 0x400
 
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f8271a5..900b562 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -211,7 +211,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 		goto out_free_mbox;
 
 	do {
-		lpfc_dump_mem(phba, pmb, offset);
+		lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
 
 		if (rc != MBX_SUCCESS) {
@@ -425,6 +425,9 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 		return -EIO;
 	}
 
+	/* Check if the port is disabled */
+	lpfc_sli_read_link_ste(phba);
+
 	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
 	if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
 		phba->cfg_hba_queue_depth =
@@ -524,27 +527,49 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Set up error attention (ERATT) polling timer */
 	mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
 
-	lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
-	pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
-	lpfc_set_loopback_flag(phba);
-	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-	if (rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+	/* Check if the port is disabled */
+	lpfc_sli_read_serdes_param(phba);
+
+	if (phba->hba_flag & LINK_DISABLED) {
+		lpfc_printf_log(phba,
+			KERN_ERR, LOG_INIT,
+			"2598 Adapter Link is disabled.\n");
+		lpfc_down_link(phba, pmb);
+		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+		if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
+			lpfc_printf_log(phba,
+			KERN_ERR, LOG_INIT,
+			"2599 Adapter failed to issue DOWN_LINK"
+			" mbox command rc 0x%x\n", rc);
+
+			mempool_free(pmb, phba->mbox_mem_pool);
+			return -EIO;
+		}
+	} else {
+		lpfc_init_link(phba, pmb, phba->cfg_topology,
+			phba->cfg_link_speed);
+		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		lpfc_set_loopback_flag(phba);
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0454 Adapter failed to init, mbxCmd x%x "
 				"INIT_LINK, mbxStatus x%x\n",
 				mb->mbxCommand, mb->mbxStatus);
 
-		/* Clear all interrupt enable conditions */
-		writel(0, phba->HCregaddr);
-		readl(phba->HCregaddr); /* flush */
-		/* Clear all pending interrupts */
-		writel(0xffffffff, phba->HAregaddr);
-		readl(phba->HAregaddr); /* flush */
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr); /* flush */
+			/* Clear all pending interrupts */
+			writel(0xffffffff, phba->HAregaddr);
+			readl(phba->HAregaddr); /* flush */
 
-		phba->link_state = LPFC_HBA_ERROR;
-		if (rc != MBX_BUSY)
-			mempool_free(pmb, phba->mbox_mem_pool);
-		return -EIO;
+			phba->link_state = LPFC_HBA_ERROR;
+			if (rc != MBX_BUSY)
+				mempool_free(pmb, phba->mbox_mem_pool);
+			return -EIO;
+		}
 	}
 	/* MBOX buffer will be freed in mbox compl */
 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 42b4f38..245945f 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -79,21 +79,37 @@ lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
 }
 
 /**
- * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
+ * lpfc_down_link - Bring down HBAs link.
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
- * @offset: offset for dumping VPD memory mailbox command.
+ *
+ * This routine prepares a mailbox command to bring down HBA link.
+ **/
+void
+lpfc_down_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	MAILBOX_t *mb;
+	memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+	mb = &pmb->u.mb;
+	mb->mbxCommand = MBX_DOWN_LINK;
+	mb->mbxOwner = OWN_HOST;
+}
+
+/**
+ * lpfc_dump_mem - Prepare a mailbox command for reading a region.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset into the region.
+ * @region_id: config region id.
  *
  * The dump mailbox command provides a method for the device driver to obtain
  * various types of information from the HBA device.
  *
- * This routine prepares the mailbox command for dumping HBA Vital Product
- * Data (VPD) memory. This mailbox command is to be used for retrieving a
- * portion (DMP_RSP_SIZE bytes) of a HBA's VPD from the HBA at an address
- * offset specified by the offset parameter.
+ * This routine prepares the mailbox command for dumping HBA's config region.
  **/
 void
-lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
+lpfc_dump_mem(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, uint16_t offset,
+		uint16_t region_id)
 {
 	MAILBOX_t *mb;
 	void *ctx;
@@ -107,7 +123,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
 	mb->un.varDmp.cv = 1;
 	mb->un.varDmp.type = DMP_NV_PARAMS;
 	mb->un.varDmp.entry_index = offset;
-	mb->un.varDmp.region_id = DMP_REGION_VPD;
+	mb->un.varDmp.region_id = region_id;
 	mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t));
 	mb->un.varDmp.co = 0;
 	mb->un.varDmp.resp_offset = 0;
@@ -1864,8 +1880,8 @@ lpfc_dump_fcoe_param(struct lpfc_hba *phba,
 
 	mb->mbxCommand = MBX_DUMP_MEMORY;
 	mb->un.varDmp.type = DMP_NV_PARAMS;
-	mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
-	mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+	mb->un.varDmp.region_id = DMP_REGION_23;
+	mb->un.varDmp.sli4_length = DMP_RGN23_SIZE;
 	mb->un.varWords[3] = putPaddrLow(mp->phys);
 	mb->un.varWords[4] = putPaddrHigh(mp->phys);
 	return 0;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 04f527c..a3f8545 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4139,7 +4139,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
 		return -EIO;
 	}
 	data_length = mqe->un.mb_words[5];
-	if (data_length > DMP_FCOEPARAM_RGN_SIZE) {
+	if (data_length > DMP_RGN23_SIZE) {
 		lpfc_mbuf_free(phba, mp->virt, mp->phys);
 		kfree(mp);
 		return -EIO;
@@ -6789,6 +6789,33 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
 
 
 /**
+ * lpfc_sli_bemem_bcopy - SLI memory copy function
+ * @srcp: Source memory pointer.
+ * @destp: Destination memory pointer.
+ * @cnt: Number of words required to be copied.
+ *
+ * This function is used for copying data between a data structure
+ * with big endian representation to local endianness.
+ * This function can be called with or without lock.
+ **/
+void
+lpfc_sli_bemem_bcopy(void *srcp, void *destp, uint32_t cnt)
+{
+	uint32_t *src = srcp;
+	uint32_t *dest = destp;
+	uint32_t ldata;
+	int i;
+
+	for (i = 0; i < (int)cnt; i += sizeof(uint32_t)) {
+		ldata = *src;
+		ldata = be32_to_cpu(ldata);
+		*dest = ldata;
+		src++;
+		dest++;
+	}
+}
+
+/**
  * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
@@ -11564,3 +11591,132 @@ lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
 		error = 0;
 	return error;
 }
+
+/**
+ * lpfc_sli_read_link_ste - Read region 23 to decide if link is disabled.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function read region 23 and parse TLV for port status to
+ * decide if the user disaled the port. If the TLV indicates the
+ * port is disabled, the hba_flag is set accordingly.
+ **/
+void
+lpfc_sli_read_link_ste(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmb = NULL;
+	MAILBOX_t *mb;
+	uint8_t *rgn23_data = NULL;
+	uint32_t offset = 0, data_size, sub_tlv_len, tlv_offset;
+	int rc;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2600 lpfc_sli_read_serdes_param failed to"
+			" allocate mailbox memory\n");
+		goto out;
+	}
+	mb = &pmb->u.mb;
+
+	/* Get adapter Region 23 data */
+	rgn23_data = kzalloc(DMP_RGN23_SIZE, GFP_KERNEL);
+	if (!rgn23_data)
+		goto out;
+
+	do {
+		lpfc_dump_mem(phba, pmb, offset, DMP_REGION_23);
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2601 lpfc_sli_read_link_ste failed to"
+				" read config region 23 rc 0x%x Status 0x%x\n",
+				rc, mb->mbxStatus);
+			mb->un.varDmp.word_cnt = 0;
+		}
+		/*
+		 * dump mem may return a zero when finished or we got a
+		 * mailbox error, either way we are done.
+		 */
+		if (mb->un.varDmp.word_cnt == 0)
+			break;
+		if (mb->un.varDmp.word_cnt > DMP_RGN23_SIZE - offset)
+			mb->un.varDmp.word_cnt = DMP_RGN23_SIZE - offset;
+
+		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+			rgn23_data + offset,
+			mb->un.varDmp.word_cnt);
+		offset += mb->un.varDmp.word_cnt;
+	} while (mb->un.varDmp.word_cnt && offset < DMP_RGN23_SIZE);
+
+	data_size = offset;
+	offset = 0;
+
+	if (!data_size)
+		goto out;
+
+	/* Check the region signature first */
+	if (memcmp(&rgn23_data[offset], LPFC_REGION23_SIGNATURE, 4)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2619 Config region 23 has bad signature\n");
+			goto out;
+	}
+	offset += 4;
+
+	/* Check the data structure version */
+	if (rgn23_data[offset] != LPFC_REGION23_VERSION) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2620 Config region 23 has bad version\n");
+		goto out;
+	}
+	offset += 4;
+
+	/* Parse TLV entries in the region */
+	while (offset < data_size) {
+		if (rgn23_data[offset] == LPFC_REGION23_LAST_REC)
+			break;
+		/*
+		 * If the TLV is not driver specific TLV or driver id is
+		 * not linux driver id, skip the record.
+		 */
+		if ((rgn23_data[offset] != DRIVER_SPECIFIC_TYPE) ||
+		    (rgn23_data[offset + 2] != LINUX_DRIVER_ID) ||
+		    (rgn23_data[offset + 3] != 0)) {
+			offset += rgn23_data[offset + 1] * 4 + 4;
+			continue;
+		}
+
+		/* Driver found a driver specific TLV in the config region */
+		sub_tlv_len = rgn23_data[offset + 1] * 4;
+		offset += 4;
+		tlv_offset = 0;
+
+		/*
+		 * Search for configured port state sub-TLV.
+		 */
+		while ((offset < data_size) &&
+			(tlv_offset < sub_tlv_len)) {
+			if (rgn23_data[offset] == LPFC_REGION23_LAST_REC) {
+				offset += 4;
+				tlv_offset += 4;
+				break;
+			}
+			if (rgn23_data[offset] != PORT_STE_TYPE) {
+				offset += rgn23_data[offset + 1] * 4 + 4;
+				tlv_offset += rgn23_data[offset + 1] * 4 + 4;
+				continue;
+			}
+
+			/* This HBA contains PORT_STE configured */
+			if (!rgn23_data[offset + 2])
+				phba->hba_flag |= LINK_DISABLED;
+
+			goto out;
+		}
+	}
+out:
+	if (pmb)
+		mempool_free(pmb, phba->mbox_mem_pool);
+	kfree(rgn23_data);
+	return;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index b6f3e04..b5f4ba1 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -151,6 +151,10 @@ struct lpfc_fcf {
 #define LPFC_REGION23_SIGNATURE "RG23"
 #define LPFC_REGION23_VERSION	1
 #define LPFC_REGION23_LAST_REC  0xff
+#define DRIVER_SPECIFIC_TYPE	0xA2
+#define LINUX_DRIVER_ID		0x20
+#define PORT_STE_TYPE		0x1
+
 struct lpfc_fip_param_hdr {
 	uint8_t type;
 #define FCOE_PARAM_TYPE		0xA0