[SCSI] lpfc 8.3.25: Enhancements to Debug infrastructure

Enhancements to Debug infrastructure

- debugfs additions for new hardware.
- Correct stack overflow in lpfc_debugfs_dumpHBASlim_data()
- Correct warning on uninitialized reg_val in lpfc_idiag_drbacc_write()
- Separated the iDiag command for capturing mailbox commands for generic
  issue mailbox command entry point and for BSG multi-buffer handling.
- Added capturing dumping capabiliy of mailbox command and external buffer
  for the completion of the mailbox command so that the outcome can be
  examined.
- Changed all the iDiag command structure data array indexing introduced so
  far with properly defined macros.
- Added SLI4 device PCI BAR memory mapped register read/browse, write-by-
  value, set-bit, and clear-bit methods for both interface type 0 and
  interface type 2.
- Corrected warnings on mbxstatus being uninitialized in error paths in
  lpfc_bsg.c

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 159 insertions, 3 deletions

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 5b28ea1..247c24f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4714,10 +4714,15 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
  * lpfc_sli4_get_avail_extnt_rsrc - Get available resource extent count.
  * @phba: Pointer to HBA context object.
  * @type: The resource extent type.
+ * @extnt_count: buffer to hold port available extent count.
+ * @extnt_size: buffer to hold element count per extent.
  *
- * This function allocates all SLI4 resource identifiers.
+ * This function calls the port and retrievs the number of available
+ * extents and their size for a particular extent type.
+ *
+ * Returns: 0 if successful.  Nonzero otherwise.
  **/
-static int
+int
 lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type,
 			       uint16_t *extnt_count, uint16_t *extnt_size)
 {
@@ -4894,7 +4899,7 @@ lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt,
 				     req_len, *emb);
 	if (alloc_len < req_len) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-			"9000 Allocated DMA memory size (x%x) is "
+			"2982 Allocated DMA memory size (x%x) is "
 			"less than the requested DMA memory "
 			"size (x%x)\n", alloc_len, req_len);
 		return -ENOMEM;
@@ -5508,6 +5513,154 @@ lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_get_allocated_extnts - Get the port's allocated extents.
+ * @phba: Pointer to HBA context object.
+ * @type: The resource extent type.
+ * @extnt_count: buffer to hold port extent count response
+ * @extnt_size: buffer to hold port extent size response.
+ *
+ * This function calls the port to read the host allocated extents
+ * for a particular type.
+ **/
+int
+lpfc_sli4_get_allocated_extnts(struct lpfc_hba *phba, uint16_t type,
+			       uint16_t *extnt_cnt, uint16_t *extnt_size)
+{
+	bool emb;
+	int rc = 0;
+	uint16_t curr_blks = 0;
+	uint32_t req_len, emb_len;
+	uint32_t alloc_len, mbox_tmo;
+	struct list_head *blk_list_head;
+	struct lpfc_rsrc_blks *rsrc_blk;
+	LPFC_MBOXQ_t *mbox;
+	void *virtaddr = NULL;
+	struct lpfc_mbx_nembed_rsrc_extent *n_rsrc;
+	struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext;
+	union  lpfc_sli4_cfg_shdr *shdr;
+
+	switch (type) {
+	case LPFC_RSC_TYPE_FCOE_VPI:
+		blk_list_head = &phba->lpfc_vpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_XRI:
+		blk_list_head = &phba->sli4_hba.lpfc_xri_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VFI:
+		blk_list_head = &phba->sli4_hba.lpfc_vfi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_RPI:
+		blk_list_head = &phba->sli4_hba.lpfc_rpi_blk_list;
+		break;
+	default:
+		return -EIO;
+	}
+
+	/* Count the number of extents currently allocatd for this type. */
+	list_for_each_entry(rsrc_blk, blk_list_head, list) {
+		if (curr_blks == 0) {
+			/*
+			 * The GET_ALLOCATED mailbox does not return the size,
+			 * just the count.  The size should be just the size
+			 * stored in the current allocated block and all sizes
+			 * for an extent type are the same so set the return
+			 * value now.
+			 */
+			*extnt_size = rsrc_blk->rsrc_size;
+		}
+		curr_blks++;
+	}
+
+	/* Calculate the total requested length of the dma memory. */
+	req_len = curr_blks * sizeof(uint16_t);
+
+	/*
+	 * Calculate the size of an embedded mailbox.  The uint32_t
+	 * accounts for extents-specific word.
+	 */
+	emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) -
+		sizeof(uint32_t);
+
+	/*
+	 * Presume the allocation and response will fit into an embedded
+	 * mailbox.  If not true, reconfigure to a non-embedded mailbox.
+	 */
+	emb = LPFC_SLI4_MBX_EMBED;
+	req_len = emb_len;
+	if (req_len > emb_len) {
+		req_len = curr_blks * sizeof(uint16_t) +
+			sizeof(union lpfc_sli4_cfg_shdr) +
+			sizeof(uint32_t);
+		emb = LPFC_SLI4_MBX_NEMBED;
+	}
+
+	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	memset(mbox, 0, sizeof(LPFC_MBOXQ_t));
+
+	alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+				     LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT,
+				     req_len, emb);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2983 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		rc = -ENOMEM;
+		goto err_exit;
+	}
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, curr_blks, type, emb);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	/*
+	 * Figure out where the response is located.  Then get local pointers
+	 * to the response data.  The port does not guarantee to respond to
+	 * all extents counts request so update the local variable with the
+	 * allocated count from the port.
+	 */
+	if (emb == LPFC_SLI4_MBX_EMBED) {
+		rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents;
+		shdr = &rsrc_ext->header.cfg_shdr;
+		*extnt_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp);
+	} else {
+		virtaddr = mbox->sge_array->addr[0];
+		n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr;
+		shdr = &n_rsrc->cfg_shdr;
+		*extnt_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc);
+	}
+
+	if (bf_get(lpfc_mbox_hdr_status, &shdr->response)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"2984 Failed to read allocated resources "
+			"for type %d - Status 0x%x Add'l Status 0x%x.\n",
+			type,
+			bf_get(lpfc_mbox_hdr_status, &shdr->response),
+			bf_get(lpfc_mbox_hdr_add_status, &shdr->response));
+		rc = -EIO;
+		goto err_exit;
+	}
+ err_exit:
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return rc;
+}
+
+/**
  * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
  * @phba: Pointer to HBA context object.
  *
@@ -6637,6 +6790,9 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
 	unsigned long iflags;
 	int rc;
 
+	/* dump from issue mailbox command if setup */
+	lpfc_idiag_mbxacc_dump_issue_mbox(phba, &mboxq->u.mb);
+
 	rc = lpfc_mbox_dev_check(phba);
 	if (unlikely(rc)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,