Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc,
  aacraid, ipr) plus an assortment of minor updates.  There's also a
  major update to aic1542 which moves the driver into this millenium"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits)
  change SCSI Maintainer email
  sd, mmc, virtio_blk, string_helpers: fix block size units
  ufs: add support to allow non standard behaviours (quirks)
  ufs-qcom: save controller revision info in internal structure
  qla2xxx: Update driver version to 8.07.00.18-k
  qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
  qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
  qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
  qla2xxx: Disable Interrupt handshake for ISP27XX.
  qla2xxx: Add debugging info for MBX timeout.
  qla2xxx: Add serdes read/write support for ISP27XX
  qla2xxx: Add udev notification to save fw dump for ISP27XX
  qla2xxx: Add message for sucessful FW dump collected for ISP27XX.
  qla2xxx: Add support to load firmware from file for ISP 26XX/27XX.
  qla2xxx: Fix beacon blink for ISP27XX.
  qla2xxx: Increase the wait time for firmware to be ready for P3P.
  qla2xxx: Fix crash due to wrong casting of reg for ISP27XX.
  qla2xxx: Fix warnings reported by static checker.
  lpfc: Update version to 10.5.0.0 for upstream patch set
  lpfc: Update copyright to 2015
  ...

1 files changed, 55 insertions, 28 deletions

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4f9222e..cb73cf9 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -1130,6 +1130,25 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
+ * @data: A pointer to the immediate command data portion of the IOCB.
+ * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
+ *
+ * The routine copies the entire FCP command from @fcp_cmnd to @data while
+ * byte swapping the data to big endian format for transmission on the wire.
+ **/
+static void
+lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
+{
+	int i, j;
+
+	for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
+	     i += sizeof(uint32_t), j++) {
+		((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
+	}
+}
+
+/**
  * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -1264,6 +1283,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	 * we need to set word 4 of IOCB here
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+	lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
 	return 0;
 }
 
@@ -4127,24 +4147,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 }
 
 /**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
- * @data: A pointer to the immediate command data portion of the IOCB.
- * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
- *
- * The routine copies the entire FCP command from @fcp_cmnd to @data while
- * byte swapping the data to big endian format for transmission on the wire.
- **/
-static void
-lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
-{
-	int i, j;
-	for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
-	     i += sizeof(uint32_t), j++) {
-		((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
-	}
-}
-
-/**
  * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
@@ -4223,9 +4225,6 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		fcp_cmnd->fcpCntl3 = 0;
 		phba->fc4ControlRequests++;
 	}
-	if (phba->sli_rev == 3 &&
-	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
-		lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
 	/*
 	 * Finish initializing those IOCB fields that are independent
 	 * of the scsi_cmnd request_buffer
@@ -5118,9 +5117,10 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 	int status;
 
 	rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
-	if (!rdata) {
+	if (!rdata || !rdata->pnode) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-			"0798 Device Reset rport failure: rdata x%p\n", rdata);
+				 "0798 Device Reset rport failure: rdata x%p\n",
+				 rdata);
 		return FAILED;
 	}
 	pnode = rdata->pnode;
@@ -5202,10 +5202,12 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
 	if (status == FAILED) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
 			"0722 Target Reset rport failure: rdata x%p\n", rdata);
-		spin_lock_irq(shost->host_lock);
-		pnode->nlp_flag &= ~NLP_NPR_ADISC;
-		pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
-		spin_unlock_irq(shost->host_lock);
+		if (pnode) {
+			spin_lock_irq(shost->host_lock);
+			pnode->nlp_flag &= ~NLP_NPR_ADISC;
+			pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+			spin_unlock_irq(shost->host_lock);
+		}
 		lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
 					  LPFC_CTX_TGT);
 		return FAST_IO_FAIL;
@@ -5857,6 +5859,31 @@ lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 	return false;
 }
 
+struct scsi_host_template lpfc_template_s3 = {
+	.module			= THIS_MODULE,
+	.name			= LPFC_DRIVER_NAME,
+	.info			= lpfc_info,
+	.queuecommand		= lpfc_queuecommand,
+	.eh_abort_handler	= lpfc_abort_handler,
+	.eh_device_reset_handler = lpfc_device_reset_handler,
+	.eh_target_reset_handler = lpfc_target_reset_handler,
+	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
+	.slave_alloc		= lpfc_slave_alloc,
+	.slave_configure	= lpfc_slave_configure,
+	.slave_destroy		= lpfc_slave_destroy,
+	.scan_finished		= lpfc_scan_finished,
+	.this_id		= -1,
+	.sg_tablesize		= LPFC_DEFAULT_SG_SEG_CNT,
+	.cmd_per_lun		= LPFC_CMD_PER_LUN,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.shost_attrs		= lpfc_hba_attrs,
+	.max_sectors		= 0xFFFF,
+	.vendor_id		= LPFC_NL_VENDOR_ID,
+	.change_queue_depth	= scsi_change_queue_depth,
+	.use_blk_tags		= 1,
+	.track_queue_depth	= 1,
+};
+
 struct scsi_host_template lpfc_template = {
 	.module			= THIS_MODULE,
 	.name			= LPFC_DRIVER_NAME,