diff options
author | James Smart <James.Smart@Emulex.Com> | 2007-04-25 09:53:22 -0400 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.il.steeleye.com> | 2007-05-06 09:33:16 -0500 |
commit | 47a8617c7df6cc8b8617a3deb5a36bbae1997d13 (patch) | |
tree | ba592dbafd7f3144e3ed0a210cefe7ed89b96058 /drivers/scsi/lpfc/lpfc_init.c | |
parent | ebdbe65f07bb26baf69fcb0ee332702064888018 (diff) | |
download | op-kernel-dev-47a8617c7df6cc8b8617a3deb5a36bbae1997d13.zip op-kernel-dev-47a8617c7df6cc8b8617a3deb5a36bbae1997d13.tar.gz |
[SCSI] lpfc 8.1.12 : Add support for async scanning
Add support for async scanning
Notes: This is the async scan patch to our driver from Matthew Wilcox.
The async scan logic is still subject to errors in insmod/rmmod, as
the async scan threads don't get shutdown when the module unloads
underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 305 |
1 files changed, 155 insertions, 150 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 5e9a839..7cb92c7 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -418,33 +418,6 @@ lpfc_config_port_post(struct lpfc_hba * phba) return (0); } -static int -lpfc_discovery_wait(struct lpfc_hba *phba) -{ - int i = 0; - - while ((phba->hba_state != LPFC_HBA_READY) || - (phba->num_disc_nodes) || (phba->fc_prli_sent) || - ((phba->fc_map_cnt == 0) && (i<2)) || - (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) { - /* Check every second for 30 retries. */ - i++; - if (i > 30) { - return -ETIMEDOUT; - } - if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) { - /* The link is down. Set linkdown timeout */ - return -ETIMEDOUT; - } - - /* Delay for 1 second to give discovery time to complete. */ - msleep(1000); - - } - - return 0; -} - /************************************************************************/ /* */ /* lpfc_hba_down_prep */ @@ -1362,6 +1335,156 @@ lpfc_scsi_free(struct lpfc_hba * phba) return 0; } +void lpfc_remove_device(struct lpfc_hba *phba) +{ + unsigned long iflag; + + lpfc_free_sysfs_attr(phba); + + spin_lock_irqsave(phba->host->host_lock, iflag); + phba->fc_flag |= FC_UNLOADING; + + spin_unlock_irqrestore(phba->host->host_lock, iflag); + + fc_remove_host(phba->host); + scsi_remove_host(phba->host); + + kthread_stop(phba->worker_thread); + + /* + * Bring down the SLI Layer. This step disable all interrupts, + * clears the rings, discards all mailbox commands, and resets + * the HBA. + */ + lpfc_sli_hba_down(phba); + lpfc_sli_brdrestart(phba); + + /* Release the irq reservation */ + free_irq(phba->pcidev->irq, phba); + pci_disable_msi(phba->pcidev); + + lpfc_cleanup(phba); + lpfc_stop_timer(phba); + phba->work_hba_events = 0; + + /* + * Call scsi_free before mem_free since scsi bufs are released to their + * corresponding pools here. + */ + lpfc_scsi_free(phba); + lpfc_mem_free(phba); + + /* Free resources associated with SLI2 interface */ + dma_free_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE, + phba->slim2p, phba->slim2p_mapping); + + /* unmap adapter SLIM and Control Registers */ + iounmap(phba->ctrl_regs_memmap_p); + iounmap(phba->slim_memmap_p); + + pci_release_regions(phba->pcidev); + pci_disable_device(phba->pcidev); + + idr_remove(&lpfc_hba_index, phba->brd_no); + scsi_host_put(phba->host); +} + +void lpfc_scan_start(struct Scsi_Host *host) +{ + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + + if (lpfc_alloc_sysfs_attr(phba)) + goto error; + + phba->MBslimaddr = phba->slim_memmap_p; + phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; + phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; + phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; + phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; + + if (lpfc_sli_hba_setup(phba)) + goto error; + + /* + * hba setup may have changed the hba_queue_depth so we need to adjust + * the value of can_queue. + */ + host->can_queue = phba->cfg_hba_queue_depth - 10; + return; + +error: + lpfc_remove_device(phba); +} + +int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; + + if (!phba->host) + return 1; + if (time >= 30 * HZ) + goto finished; + + if (phba->hba_state != LPFC_HBA_READY) + return 0; + if (phba->num_disc_nodes || phba->fc_prli_sent) + return 0; + if ((phba->fc_map_cnt == 0) && (time < 2 * HZ)) + return 0; + if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) + return 0; + if ((phba->hba_state > LPFC_LINK_DOWN) || (time < 15 * HZ)) + return 0; + +finished: + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { + spin_lock_irq(shost->host_lock); + lpfc_poll_start_timer(phba); + spin_unlock_irq(shost->host_lock); + } + + /* + * set fixed host attributes + * Must done after lpfc_sli_hba_setup() + */ + + fc_host_node_name(shost) = wwn_to_u64(phba->fc_nodename.u.wwn); + fc_host_port_name(shost) = wwn_to_u64(phba->fc_portname.u.wwn); + fc_host_supported_classes(shost) = FC_COS_CLASS3; + + memset(fc_host_supported_fc4s(shost), 0, + sizeof(fc_host_supported_fc4s(shost))); + fc_host_supported_fc4s(shost)[2] = 1; + fc_host_supported_fc4s(shost)[7] = 1; + + lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost)); + + fc_host_supported_speeds(shost) = 0; + if (phba->lmt & LMT_10Gb) + fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT; + if (phba->lmt & LMT_4Gb) + fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT; + if (phba->lmt & LMT_2Gb) + fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT; + if (phba->lmt & LMT_1Gb) + fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT; + + fc_host_maxframe_size(shost) = + ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | + (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb); + + /* This value is also unchanging */ + memset(fc_host_active_fc4s(shost), 0, + sizeof(fc_host_active_fc4s(shost))); + fc_host_active_fc4s(shost)[2] = 1; + fc_host_active_fc4s(shost)[7] = 1; + + spin_lock_irq(shost->host_lock); + phba->fc_flag &= ~FC_LOADING; + spin_unlock_irq(shost->host_lock); + + return 1; +} static int __devinit lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) @@ -1552,13 +1675,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) host->transportt = lpfc_transport_template; pci_set_drvdata(pdev, host); - error = scsi_add_host(host, &pdev->dev); - if (error) - goto out_kthread_stop; - - error = lpfc_alloc_sysfs_attr(phba); - if (error) - goto out_remove_host; if (phba->cfg_use_msi) { error = pci_enable_msi(phba->pcidev); @@ -1574,73 +1690,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0451 Enable interrupt handler failed\n", phba->brd_no); - goto out_free_sysfs_attr; + goto out_kthread_stop; } - phba->MBslimaddr = phba->slim_memmap_p; - phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; - phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; - phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; - phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; - error = lpfc_sli_hba_setup(phba); - if (error) { - error = -ENODEV; + error = scsi_add_host(host, &pdev->dev); + if (error) goto out_free_irq; - } - - /* - * hba setup may have changed the hba_queue_depth so we need to adjust - * the value of can_queue. - */ - host->can_queue = phba->cfg_hba_queue_depth - 10; - - lpfc_discovery_wait(phba); - - if (phba->cfg_poll & DISABLE_FCP_RING_INT) { - spin_lock_irq(phba->host->host_lock); - lpfc_poll_start_timer(phba); - spin_unlock_irq(phba->host->host_lock); - } - /* - * set fixed host attributes - * Must done after lpfc_sli_hba_setup() - */ - - fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn); - fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn); - fc_host_supported_classes(host) = FC_COS_CLASS3; - - memset(fc_host_supported_fc4s(host), 0, - sizeof(fc_host_supported_fc4s(host))); - fc_host_supported_fc4s(host)[2] = 1; - fc_host_supported_fc4s(host)[7] = 1; - - lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host)); - - fc_host_supported_speeds(host) = 0; - if (phba->lmt & LMT_10Gb) - fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT; - if (phba->lmt & LMT_4Gb) - fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT; - if (phba->lmt & LMT_2Gb) - fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT; - if (phba->lmt & LMT_1Gb) - fc_host_supported_speeds(host) |= FC_PORTSPEED_1GBIT; - - fc_host_maxframe_size(host) = - ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | - (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb); - - /* This value is also unchanging */ - memset(fc_host_active_fc4s(host), 0, - sizeof(fc_host_active_fc4s(host))); - fc_host_active_fc4s(host)[2] = 1; - fc_host_active_fc4s(host)[7] = 1; + scsi_scan_host(host); - spin_lock_irq(phba->host->host_lock); - phba->fc_flag &= ~FC_LOADING; - spin_unlock_irq(phba->host->host_lock); return 0; out_free_irq: @@ -1648,11 +1706,6 @@ out_free_irq: phba->work_hba_events = 0; free_irq(phba->pcidev->irq, phba); pci_disable_msi(phba->pcidev); -out_free_sysfs_attr: - lpfc_free_sysfs_attr(phba); -out_remove_host: - fc_remove_host(phba->host); - scsi_remove_host(phba->host); out_kthread_stop: kthread_stop(phba->worker_thread); out_free_iocbq: @@ -1690,56 +1743,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) { struct Scsi_Host *host = pci_get_drvdata(pdev); struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata; - unsigned long iflag; - - lpfc_free_sysfs_attr(phba); - - spin_lock_irqsave(phba->host->host_lock, iflag); - phba->fc_flag |= FC_UNLOADING; - - spin_unlock_irqrestore(phba->host->host_lock, iflag); - - fc_remove_host(phba->host); - scsi_remove_host(phba->host); - - kthread_stop(phba->worker_thread); - - /* - * Bring down the SLI Layer. This step disable all interrupts, - * clears the rings, discards all mailbox commands, and resets - * the HBA. - */ - lpfc_sli_hba_down(phba); - lpfc_sli_brdrestart(phba); - /* Release the irq reservation */ - free_irq(phba->pcidev->irq, phba); - pci_disable_msi(phba->pcidev); - - lpfc_cleanup(phba); - lpfc_stop_timer(phba); - phba->work_hba_events = 0; - - /* - * Call scsi_free before mem_free since scsi bufs are released to their - * corresponding pools here. - */ - lpfc_scsi_free(phba); - lpfc_mem_free(phba); - - /* Free resources associated with SLI2 interface */ - dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, - phba->slim2p, phba->slim2p_mapping); - - /* unmap adapter SLIM and Control Registers */ - iounmap(phba->ctrl_regs_memmap_p); - iounmap(phba->slim_memmap_p); - - pci_release_regions(phba->pcidev); - pci_disable_device(phba->pcidev); - - idr_remove(&lpfc_hba_index, phba->brd_no); - scsi_host_put(phba->host); + lpfc_remove_device(phba); pci_set_drvdata(pdev, NULL); } |