[SCSI] aic94xx: new driver

This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 files changed, 4474 insertions, 0 deletions

diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
new file mode 100644
index 0000000..aafdc92f
--- /dev/null
+++ b/drivers/scsi/libsas/Kconfig
@@ -0,0 +1,39 @@
+#
+# Kernel configuration file for the SAS Class
+#
+# Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+
+config SCSI_SAS_LIBSAS
+	tristate "SAS Domain Transport Attributes"
+	depends on SCSI
+	select SCSI_SAS_ATTRS
+	help
+	  This provides transport specific helpers for SAS drivers which
+	  use the domain device construct (like the aic94xxx).
+
+config SCSI_SAS_LIBSAS_DEBUG
+	bool "Compile the SAS Domain Transport Attributes in debug mode"
+	default y
+	depends on SCSI_SAS_LIBSAS
+	help
+		Compiles the SAS Layer in debug mode.  In debug mode, the
+		SAS Layer prints diagnostic and debug messages.
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
new file mode 100644
index 0000000..44d972a
--- /dev/null
+++ b/drivers/scsi/libsas/Makefile
@@ -0,0 +1,36 @@
+#
+# Kernel Makefile for the libsas helpers
+#
+# Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
+	EXTRA_CFLAGS += -DSAS_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
+libsas-y +=  sas_init.o     \
+		sas_phy.o      \
+		sas_port.o     \
+		sas_event.o    \
+		sas_dump.o     \
+		sas_discover.o \
+		sas_expander.o \
+		sas_scsi_host.o
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
new file mode 100644
index 0000000..d977bd4
--- /dev/null
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -0,0 +1,749 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+void sas_init_dev(struct domain_device *dev)
+{
+        INIT_LIST_HEAD(&dev->siblings);
+        INIT_LIST_HEAD(&dev->dev_list_node);
+        switch (dev->dev_type) {
+        case SAS_END_DEV:
+                break;
+        case EDGE_DEV:
+        case FANOUT_DEV:
+                INIT_LIST_HEAD(&dev->ex_dev.children);
+                break;
+        case SATA_DEV:
+        case SATA_PM:
+        case SATA_PM_PORT:
+                INIT_LIST_HEAD(&dev->sata_dev.children);
+                break;
+        default:
+                break;
+        }
+}
+
+static void sas_task_timedout(unsigned long _task)
+{
+	struct sas_task *task = (void *) _task;
+	unsigned long flags;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+			    int pci_dma_dir)
+{
+	int res = 0;
+	struct scatterlist *scatter = NULL;
+	struct task_status_struct *ts = &task->task_status;
+	int num_scatter = 0;
+	int retries = 0;
+	struct sas_internal *i =
+		to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+	if (pci_dma_dir != PCI_DMA_NONE) {
+		scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
+		if (!scatter)
+			goto out;
+
+		sg_init_one(scatter, buffer, size);
+		num_scatter = 1;
+	}
+
+	task->task_proto = task->dev->tproto;
+	task->scatter = scatter;
+	task->num_scatter = num_scatter;
+	task->total_xfer_len = size;
+	task->data_dir = pci_dma_dir;
+	task->task_done = sas_disc_task_done;
+
+	for (retries = 0; retries < 5; retries++) {
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_completion(&task->completion);
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = sas_task_timedout;
+		task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+		if (res) {
+			del_timer(&task->timer);
+			SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+				    res);
+			goto ex_err;
+		}
+		wait_for_completion(&task->completion);
+		res = -ETASK;
+		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			int res2;
+			SAS_DPRINTK("task aborted, flags:0x%x\n",
+				    task->task_state_flags);
+			res2 = i->dft->lldd_abort_task(task);
+			SAS_DPRINTK("came back from abort task\n");
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				if (res2 == TMF_RESP_FUNC_COMPLETE)
+					continue; /* Retry the task */
+				else
+					goto ex_err;
+			}
+		}
+		if (task->task_status.stat == SAM_BUSY ||
+			   task->task_status.stat == SAM_TASK_SET_FULL ||
+			   task->task_status.stat == SAS_QUEUE_FULL) {
+			SAS_DPRINTK("task: q busy, sleeping...\n");
+			schedule_timeout_interruptible(HZ);
+		} else if (task->task_status.stat == SAM_CHECK_COND) {
+			struct scsi_sense_hdr shdr;
+
+			if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+						  &shdr)) {
+				SAS_DPRINTK("couldn't normalize sense\n");
+				continue;
+			}
+			if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+			    (shdr.sense_key == 2 && shdr.asc == 4 &&
+			     shdr.ascq == 1)) {
+				SAS_DPRINTK("device %016llx LUN: %016llx "
+					    "powering up or not ready yet, "
+					    "sleeping...\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN));
+
+				schedule_timeout_interruptible(5*HZ);
+			} else if (shdr.sense_key == 1) {
+				res = 0;
+				break;
+			} else if (shdr.sense_key == 5) {
+				break;
+			} else {
+				SAS_DPRINTK("dev %016llx LUN: %016llx "
+					    "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+					    "\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN),
+					    shdr.sense_key,
+					    shdr.asc, shdr.ascq);
+			}
+		} else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+			   task->task_status.stat != SAM_GOOD) {
+			SAS_DPRINTK("task finished with resp:0x%x, "
+				    "stat:0x%x\n",
+				    task->task_status.resp,
+				    task->task_status.stat);
+			goto ex_err;
+		} else {
+			res = 0;
+			break;
+		}
+	}
+ex_err:
+	if (pci_dma_dir != PCI_DMA_NONE)
+		kfree(scatter);
+out:
+	return res;
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device -- Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent.  This is
+ * how we know they are (domain) "root" devices.  All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct asd_sas_port *port)
+{
+	unsigned long flags;
+	struct asd_sas_phy *phy;
+	struct sas_rphy *rphy;
+	struct domain_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&port->phy_list_lock, flags);
+	if (list_empty(&port->phy_list)) {
+		spin_unlock_irqrestore(&port->phy_list_lock, flags);
+		kfree(dev);
+		return -ENODEV;
+	}
+	phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el);
+	spin_lock(&phy->frame_rcvd_lock);
+	memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+					     (size_t)phy->frame_rcvd_size));
+	spin_unlock(&phy->frame_rcvd_lock);
+	spin_unlock_irqrestore(&port->phy_list_lock, flags);
+
+	if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+		struct dev_to_host_fis *fis =
+			(struct dev_to_host_fis *) dev->frame_rcvd;
+		if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+		    fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+		    && (fis->device & ~0x10) == 0)
+			dev->dev_type = SATA_PM;
+		else
+			dev->dev_type = SATA_DEV;
+		dev->tproto = SATA_PROTO;
+	} else {
+		struct sas_identify_frame *id =
+			(struct sas_identify_frame *) dev->frame_rcvd;
+		dev->dev_type = id->dev_type;
+		dev->iproto = id->initiator_bits;
+		dev->tproto = id->target_bits;
+	}
+
+	sas_init_dev(dev);
+
+	switch (dev->dev_type) {
+	case SAS_END_DEV:
+		rphy = sas_end_device_alloc(port->port);
+		break;
+	case EDGE_DEV:
+		rphy = sas_expander_alloc(port->port,
+					  SAS_EDGE_EXPANDER_DEVICE);
+		break;
+	case FANOUT_DEV:
+		rphy = sas_expander_alloc(port->port,
+					  SAS_FANOUT_EXPANDER_DEVICE);
+		break;
+	case SATA_DEV:
+	default:
+		printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+		rphy = NULL;
+		break;
+	}
+
+	if (!rphy) {
+		kfree(dev);
+		return -ENODEV;
+	}
+	rphy->identify.phy_identifier = phy->phy->identify.phy_identifier;
+	memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_fill_in_rphy(dev, rphy);
+	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+	port->port_dev = dev;
+	dev->port = port;
+	dev->linkrate = port->linkrate;
+	dev->min_linkrate = port->linkrate;
+	dev->max_linkrate = port->linkrate;
+	dev->pathways = port->num_phys;
+	memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+	memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+	memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+	port->disc.max_level = 0;
+
+	dev->rphy = rphy;
+	spin_lock(&port->dev_list_lock);
+	list_add_tail(&dev->dev_list_node, &port->dev_list);
+	spin_unlock(&port->dev_list_lock);
+
+	return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+/* ---------- SATA ---------- */
+
+static void sas_get_ata_command_set(struct domain_device *dev)
+{
+	struct dev_to_host_fis *fis =
+		(struct dev_to_host_fis *) dev->frame_rcvd;
+
+	if ((fis->sector_count == 1 && /* ATA */
+	     fis->lbal         == 1 &&
+	     fis->lbam         == 0 &&
+	     fis->lbah         == 0 &&
+	     fis->device       == 0)
+	    ||
+	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
+	     fis->lbal         == 0 &&
+	     fis->lbam         == 0xCE &&
+	     fis->lbah         == 0xAA &&
+	     (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x14 &&
+		  fis->byte_count_high  == 0xEB &&
+		  (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+	else if ((fis->sector_count == 1 && /* SEMB */
+		  fis->lbal         == 1 &&
+		  fis->lbam         == 0x3C &&
+		  fis->lbah         == 0xC3 &&
+		  fis->device       == 0)
+		||
+		 (fis->interrupt_reason == 1 &&	/* SATA PM */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x69 &&
+		  fis->byte_count_high  == 0x96 &&
+		  (fis->device & ~0x10) == 0))
+
+		/* Treat it as a superset? */
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+			     u8 features, void *buffer, int size,
+			     int pci_dma_dir)
+{
+	int res = 0;
+	struct sas_task *task;
+	struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+		&dev->frame_rcvd[0];
+
+	res = -ENOMEM;
+	task = sas_alloc_task(GFP_KERNEL);
+	if (!task)
+		goto out;
+
+	task->dev = dev;
+
+	task->ata_task.fis.command = command;
+	task->ata_task.fis.features = features;
+	task->ata_task.fis.device = d2h_fis->device;
+	task->ata_task.retry_count = 1;
+
+	res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+	sas_free_task(task);
+out:
+	return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+	unsigned long flags;
+	struct asd_sas_port *port = dev->port;
+	struct asd_sas_phy  *phy;
+
+	BUG_ON(dev->parent);
+
+	memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_lock_irqsave(&port->phy_list_lock, flags);
+	list_for_each_entry(phy, &port->phy_list, port_phy_el)
+		memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV         0xEC
+#define ATA_IDENTIFY_PACKET_DEV  0xA1
+#define ATA_SET_FEATURES         0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it.  Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+	int     res;
+	__le16  *identify_x;
+	u8      command;
+
+	identify_x = kzalloc(512, GFP_KERNEL);
+	if (!identify_x)
+		return -ENOMEM;
+
+	if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+		dev->sata_dev.identify_device = identify_x;
+		command = ATA_IDENTIFY_DEV;
+	} else {
+		dev->sata_dev.identify_packet_device = identify_x;
+		command = ATA_IDENTIFY_PACKET_DEV;
+	}
+
+	res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+				PCI_DMA_FROMDEVICE);
+	if (res)
+		goto out_err;
+
+	/* lives on the media? */
+	if (le16_to_cpu(identify_x[0]) & 4) {
+		/* incomplete response */
+		SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+			    "dev %llx\n", SAS_ADDR(dev->sas_addr));
+		if (!le16_to_cpu(identify_x[83] & (1<<6)))
+			goto cont1;
+		res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+					ATA_FEATURE_PUP_STBY_SPIN_UP,
+					NULL, 0, PCI_DMA_NONE);
+		if (res)
+			goto cont1;
+
+		schedule_timeout_interruptible(5*HZ); /* More time? */
+		res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+					PCI_DMA_FROMDEVICE);
+		if (res)
+			goto out_err;
+	}
+cont1:
+	/* Get WWN */
+	if (dev->port->oob_mode != SATA_OOB_MODE) {
+		memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+		       SAS_ADDR_SIZE);
+	} else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+		   (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+		   == 0x5000) {
+		int i;
+
+		for (i = 0; i < 4; i++) {
+			dev->sas_addr[2*i] =
+	     (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+			dev->sas_addr[2*i+1] =
+	      le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+		}
+	}
+	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+	if (!dev->parent)
+		sas_sata_propagate_sas_addr(dev);
+
+	/* XXX Hint: register this SATA device with SATL.
+	   When this returns, dev->sata_dev->lu is alive and
+	   present.
+	sas_satl_register_dev(dev);
+	*/
+	return 0;
+out_err:
+	dev->sata_dev.identify_packet_device = NULL;
+	dev->sata_dev.identify_device = NULL;
+	kfree(identify_x);
+	return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+	return -ENODEV;
+}
+
+int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+	int res = 0;
+	struct sas_ha_struct *sas_ha = dev->port->ha;
+	struct Scsi_Host *shost = sas_ha->core.shost;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	if (i->dft->lldd_dev_found) {
+		res = i->dft->lldd_dev_found(dev);
+		if (res) {
+			printk("sas: driver on pcidev %s cannot handle "
+			       "device %llx, error:%d\n",
+			       pci_name(sas_ha->pcidev),
+			       SAS_ADDR(dev->sas_addr), res);
+		}
+	}
+	return res;
+}
+
+
+void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+	struct sas_ha_struct *sas_ha = dev->port->ha;
+	struct Scsi_Host *shost = sas_ha->core.shost;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	if (i->dft->lldd_dev_gone)
+		i->dft->lldd_dev_gone(dev);
+}
+
+/* ---------- Common/dispatchers ---------- */
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it.  Then depending on the type of device we call the appropriate
+ * discover functions.  Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it.  That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time.  Devices directly attached to a HA
+ * port, have no parents.  All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+	int res;
+
+	sas_get_ata_command_set(dev);
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	switch (dev->dev_type) {
+	case SATA_DEV:
+		res = sas_discover_sata_dev(dev);
+		break;
+	case SATA_PM:
+		res = sas_discover_sata_pm(dev);
+		break;
+	default:
+		break;
+	}
+
+	sas_notify_lldd_dev_gone(dev);
+	if (!res) {
+		sas_notify_lldd_dev_found(dev);
+	}
+	return res;
+}
+
+/**
+ * sas_discover_end_dev -- discover an end device (SSP, etc)
+ * @end: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+	int res;
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	res = sas_rphy_add(dev->rphy);
+	if (res)
+		goto out_err;
+
+	/* do this to get the end device port attributes which will have
+	 * been scanned in sas_rphy_add */
+	sas_notify_lldd_dev_gone(dev);
+	sas_notify_lldd_dev_found(dev);
+
+	return 0;
+
+out_err:
+	sas_notify_lldd_dev_gone(dev);
+	return res;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+static inline void sas_unregister_common_dev(struct domain_device *dev)
+{
+	sas_notify_lldd_dev_gone(dev);
+	if (!dev->parent)
+		dev->port->port_dev = NULL;
+	else
+		list_del_init(&dev->siblings);
+	list_del_init(&dev->dev_list_node);
+}
+
+void sas_unregister_dev(struct domain_device *dev)
+{
+	if (dev->rphy) {
+		sas_remove_children(&dev->rphy->dev);
+		sas_rphy_delete(dev->rphy);
+		dev->rphy = NULL;
+	}
+	if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+		/* remove the phys and ports, everything else should be gone */
+		kfree(dev->ex_dev.ex_phy);
+		dev->ex_dev.ex_phy = NULL;
+	}
+	sas_unregister_common_dev(dev);
+}
+
+void sas_unregister_domain_devices(struct asd_sas_port *port)
+{
+	struct domain_device *dev, *n;
+
+	list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
+		sas_unregister_dev(dev);
+
+	port->port->rphy = NULL;
+
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain -- discover the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered.  Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static void sas_discover_domain(void *data)
+{
+	int error = 0;
+	struct asd_sas_port *port = data;
+
+	sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock,
+			&port->disc.pending);
+
+	if (port->port_dev)
+		return ;
+	else {
+		error = sas_get_port_device(port);
+		if (error)
+			return;
+	}
+
+	SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+		    current->pid);
+
+	switch (port->port_dev->dev_type) {
+	case SAS_END_DEV:
+		error = sas_discover_end_dev(port->port_dev);
+		break;
+	case EDGE_DEV:
+	case FANOUT_DEV:
+		error = sas_discover_root_expander(port->port_dev);
+		break;
+	case SATA_DEV:
+	case SATA_PM:
+		error = sas_discover_sata(port->port_dev);
+		break;
+	default:
+		SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+		break;
+	}
+
+	if (error) {
+		kfree(port->port_dev); /* not kobject_register-ed yet */
+		port->port_dev = NULL;
+	}
+
+	SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+		    current->pid, error);
+}
+
+static void sas_revalidate_domain(void *data)
+{
+	int res = 0;
+	struct asd_sas_port *port = data;
+
+	sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock,
+			&port->disc.pending);
+
+	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+		    current->pid);
+	if (port->port_dev)
+		res = sas_ex_revalidate_domain(port->port_dev);
+
+	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+		    port->id, current->pid, res);
+}
+
+/* ---------- Events ---------- */
+
+int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
+{
+	struct sas_discovery *disc;
+
+	if (!port)
+		return 0;
+	disc = &port->disc;
+
+	BUG_ON(ev >= DISC_NUM_EVENTS);
+
+	sas_queue_event(ev, &disc->disc_event_lock, &disc->pending,
+			&disc->disc_work[ev], port->ha->core.shost);
+
+	return 0;
+}
+
+/**
+ * sas_init_disc -- initialize the discovery struct in the port
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
+{
+	int i;
+
+	static void (*sas_event_fns[DISC_NUM_EVENTS])(void *) = {
+		[DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
+		[DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
+	};
+
+	spin_lock_init(&disc->disc_event_lock);
+	disc->pending = 0;
+	for (i = 0; i < DISC_NUM_EVENTS; i++)
+		INIT_WORK(&disc->disc_work[i], sas_event_fns[i], port);
+}
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
new file mode 100644
index 0000000..f1246d2
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -0,0 +1,76 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_dump.h"
+
+#ifdef SAS_DEBUG
+
+static const char *sas_hae_str[] = {
+	[0] = "HAE_RESET",
+};
+
+static const char *sas_porte_str[] = {
+	[0] = "PORTE_BYTES_DMAED",
+	[1] = "PORTE_BROADCAST_RCVD",
+	[2] = "PORTE_LINK_RESET_ERR",
+	[3] = "PORTE_TIMER_EVENT",
+	[4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+	[0] = "PHYE_LOSS_OF_SIGNAL",
+	[1] = "PHYE_OOB_DONE",
+	[2] = "PHYE_OOB_ERROR",
+	[3] = "PHYE_SPINUP_HOLD",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+	SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+	SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
+{
+	SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
+		    sas_hae_str[he]);
+}
+
+void sas_dump_port(struct asd_sas_port *port)
+{
+	SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+	SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+		    SAS_ADDR(port->sas_addr));
+	SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+		    SAS_ADDR(port->attached_sas_addr));
+	SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+	SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+	SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+	SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
new file mode 100644
index 0000000..47b45d4
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -0,0 +1,42 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#ifdef SAS_DEBUG
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
+void sas_dump_port(struct asd_sas_port *port);
+
+#else /* SAS_DEBUG */
+
+static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
+static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
+static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
+				  enum ha_event he) { }
+static inline void sas_dump_port(struct asd_sas_port *port) { }
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
new file mode 100644
index 0000000..19110ed
--- /dev/null
+++ b/drivers/scsi/libsas/sas_event.c
@@ -0,0 +1,75 @@
+/*
+ * Serial Attached SCSI (SAS) Event processing
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <scsi/scsi_host.h>
+#include "sas_internal.h"
+#include "sas_dump.h"
+
+static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
+{
+	BUG_ON(event >= HA_NUM_EVENTS);
+
+	sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending,
+			&sas_ha->ha_events[event], sas_ha->core.shost);
+}
+
+static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+{
+	struct sas_ha_struct *ha = phy->ha;
+
+	BUG_ON(event >= PORT_NUM_EVENTS);
+
+	sas_queue_event(event, &ha->event_lock, &phy->port_events_pending,
+			&phy->port_events[event], ha->core.shost);
+}
+
+static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+{
+	struct sas_ha_struct *ha = phy->ha;
+
+	BUG_ON(event >= PHY_NUM_EVENTS);
+
+	sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending,
+			&phy->phy_events[event], ha->core.shost);
+}
+
+int sas_init_events(struct sas_ha_struct *sas_ha)
+{
+	static void (*sas_ha_event_fns[HA_NUM_EVENTS])(void *) = {
+		[HAE_RESET] = sas_hae_reset,
+	};
+
+	int i;
+
+	spin_lock_init(&sas_ha->event_lock);
+
+	for (i = 0; i < HA_NUM_EVENTS; i++)
+		INIT_WORK(&sas_ha->ha_events[i], sas_ha_event_fns[i], sas_ha);
+
+	sas_ha->notify_ha_event = notify_ha_event;
+	sas_ha->notify_port_event = notify_port_event;
+	sas_ha->notify_phy_event = notify_phy_event;
+
+	return 0;
+}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
new file mode 100644
index 0000000..b653a26
--- /dev/null
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -0,0 +1,1862 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static int sas_discover_expander(struct domain_device *dev);
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+			     u8 *sas_addr, int include);
+static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
+
+#if 0
+/* FIXME: smp needs to migrate into the sas class */
+static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+#endif
+
+/* ---------- SMP task management ---------- */
+
+static void smp_task_timedout(unsigned long _task)
+{
+	struct sas_task *task = (void *) _task;
+	unsigned long flags;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	complete(&task->completion);
+}
+
+static void smp_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+/* Give it some long enough timeout. In seconds. */
+#define SMP_TIMEOUT 10
+
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+			    void *resp, int resp_size)
+{
+	int res;
+	struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	if (!task)
+		return -ENOMEM;
+
+	task->dev = dev;
+	task->task_proto = dev->tproto;
+	sg_init_one(&task->smp_task.smp_req, req, req_size);
+	sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+	task->task_done = smp_task_done;
+
+	task->timer.data = (unsigned long) task;
+	task->timer.function = smp_task_timedout;
+	task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+	add_timer(&task->timer);
+
+	res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+
+	if (res) {
+		del_timer(&task->timer);
+		SAS_DPRINTK("executing SMP task failed:%d\n", res);
+		goto ex_err;
+	}
+
+	wait_for_completion(&task->completion);
+	res = -ETASK;
+	if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+		SAS_DPRINTK("smp task timed out or aborted\n");
+		i->dft->lldd_abort_task(task);
+		if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+			SAS_DPRINTK("SMP task aborted and not done\n");
+			goto ex_err;
+		}
+	}
+	if (task->task_status.resp == SAS_TASK_COMPLETE &&
+	    task->task_status.stat == SAM_GOOD)
+		res = 0;
+	else
+		SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+			    "status 0x%x\n", __FUNCTION__,
+			    SAS_ADDR(dev->sas_addr),
+			    task->task_status.resp,
+			    task->task_status.stat);
+ex_err:
+	sas_free_task(task);
+	return res;
+}
+
+/* ---------- Allocations ---------- */
+
+static inline void *alloc_smp_req(int size)
+{
+	u8 *p = kzalloc(size, GFP_KERNEL);
+	if (p)
+		p[0] = SMP_REQUEST;
+	return p;
+}
+
+static inline void *alloc_smp_resp(int size)
+{
+	return kzalloc(size, GFP_KERNEL);
+}
+
+/* ---------- Expander configuration ---------- */
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
+			   void *disc_resp)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	struct smp_resp *resp = disc_resp;
+	struct discover_resp *dr = &resp->disc;
+	struct sas_rphy *rphy = dev->rphy;
+	int rediscover = (phy->phy != NULL);
+
+	if (!rediscover) {
+		phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
+
+		/* FIXME: error_handling */
+		BUG_ON(!phy->phy);
+	}
+
+	switch (resp->result) {
+	case SMP_RESP_PHY_VACANT:
+		phy->phy_state = PHY_VACANT;
+		return;
+	default:
+		phy->phy_state = PHY_NOT_PRESENT;
+		return;
+	case SMP_RESP_FUNC_ACC:
+		phy->phy_state = PHY_EMPTY; /* do not know yet */
+		break;
+	}
+
+	phy->phy_id = phy_id;
+	phy->attached_dev_type = dr->attached_dev_type;
+	phy->linkrate = dr->linkrate;
+	phy->attached_sata_host = dr->attached_sata_host;
+	phy->attached_sata_dev  = dr->attached_sata_dev;
+	phy->attached_sata_ps   = dr->attached_sata_ps;
+	phy->attached_iproto = dr->iproto << 1;
+	phy->attached_tproto = dr->tproto << 1;
+	memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+	phy->attached_phy_id = dr->attached_phy_id;
+	phy->phy_change_count = dr->change_count;
+	phy->routing_attr = dr->routing_attr;
+	phy->virtual = dr->virtual;
+	phy->last_da_index = -1;
+
+	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
+	phy->phy->identify.target_port_protocols = phy->attached_tproto;
+	phy->phy->identify.phy_identifier = phy_id;
+	phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+	phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+	phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+	switch (phy->linkrate) {
+	case PHY_LINKRATE_1_5:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	case PHY_LINKRATE_3:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case PHY_LINKRATE_6:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	default:
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+		break;
+	}
+
+	if (!rediscover)
+		sas_phy_add(phy->phy);
+
+	SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+		    SAS_ADDR(dev->sas_addr), phy->phy_id,
+		    phy->routing_attr == TABLE_ROUTING ? 'T' :
+		    phy->routing_attr == DIRECT_ROUTING ? 'D' :
+		    phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
+		    SAS_ADDR(phy->attached_sas_addr));
+
+	return;
+}
+
+#define DISCOVER_REQ_SIZE  16
+#define DISCOVER_RESP_SIZE 56
+
+static int sas_ex_phy_discover(struct domain_device *dev, int single)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int  res = 0;
+	u8   *disc_req;
+	u8   *disc_resp;
+
+	disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+	if (!disc_req)
+		return -ENOMEM;
+
+	disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
+	if (!disc_resp) {
+		kfree(disc_req);
+		return -ENOMEM;
+	}
+
+	disc_req[1] = SMP_DISCOVER;
+
+	if (0 <= single && single < ex->num_phys) {
+		disc_req[9] = single;
+		res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+				       disc_resp, DISCOVER_RESP_SIZE);
+		if (res)
+			goto out_err;
+		sas_set_ex_phy(dev, single, disc_resp);
+	} else {
+		int i;
+
+		for (i = 0; i < ex->num_phys; i++) {
+			disc_req[9] = i;
+			res = smp_execute_task(dev, disc_req,
+					       DISCOVER_REQ_SIZE, disc_resp,
+					       DISCOVER_RESP_SIZE);
+			if (res)
+				goto out_err;
+			sas_set_ex_phy(dev, i, disc_resp);
+		}
+	}
+out_err:
+	kfree(disc_resp);
+	kfree(disc_req);
+	return res;
+}
+
+static int sas_expander_discover(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int res = -ENOMEM;
+
+	ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
+	if (!ex->ex_phy)
+		return -ENOMEM;
+
+	res = sas_ex_phy_discover(dev, -1);
+	if (res)
+		goto out_err;
+
+	return 0;
+ out_err:
+	kfree(ex->ex_phy);
+	ex->ex_phy = NULL;
+	return res;
+}
+
+#define MAX_EXPANDER_PHYS 128
+
+static void ex_assign_report_general(struct domain_device *dev,
+					    struct smp_resp *resp)
+{
+	struct report_general_resp *rg = &resp->rg;
+
+	dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
+	dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
+	dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+	dev->ex_dev.conf_route_table = rg->conf_route_table;
+	dev->ex_dev.configuring = rg->configuring;
+	memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
+}
+
+#define RG_REQ_SIZE   8
+#define RG_RESP_SIZE 32
+
+static int sas_ex_general(struct domain_device *dev)
+{
+	u8 *rg_req;
+	struct smp_resp *rg_resp;
+	int res;
+	int i;
+
+	rg_req = alloc_smp_req(RG_REQ_SIZE);
+	if (!rg_req)
+		return -ENOMEM;
+
+	rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+	if (!rg_resp) {
+		kfree(rg_req);
+		return -ENOMEM;
+	}
+
+	rg_req[1] = SMP_REPORT_GENERAL;
+
+	for (i = 0; i < 5; i++) {
+		res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+				       RG_RESP_SIZE);
+
+		if (res) {
+			SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
+				    SAS_ADDR(dev->sas_addr), res);
+			goto out;
+		} else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+			SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
+				    SAS_ADDR(dev->sas_addr), rg_resp->result);
+			res = rg_resp->result;
+			goto out;
+		}
+
+		ex_assign_report_general(dev, rg_resp);
+
+		if (dev->ex_dev.configuring) {
+			SAS_DPRINTK("RG: ex %llx self-configuring...\n",
+				    SAS_ADDR(dev->sas_addr));
+			schedule_timeout_interruptible(5*HZ);
+		} else
+			break;
+	}
+out:
+	kfree(rg_req);
+	kfree(rg_resp);
+	return res;
+}
+
+static void ex_assign_manuf_info(struct domain_device *dev, void
+					*_mi_resp)
+{
+	u8 *mi_resp = _mi_resp;
+	struct sas_rphy *rphy = dev->rphy;
+	struct sas_expander_device *edev = rphy_to_expander_device(rphy);
+
+	memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
+	memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
+	memcpy(edev->product_rev, mi_resp + 36,
+	       SAS_EXPANDER_PRODUCT_REV_LEN);
+
+	if (mi_resp[8] & 1) {
+		memcpy(edev->component_vendor_id, mi_resp + 40,
+		       SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+		edev->component_id = mi_resp[48] << 8 | mi_resp[49];
+		edev->component_revision_id = mi_resp[50];
+	}
+}
+
+#define MI_REQ_SIZE   8
+#define MI_RESP_SIZE 64
+
+static int sas_ex_manuf_info(struct domain_device *dev)
+{
+	u8 *mi_req;
+	u8 *mi_resp;
+	int res;
+
+	mi_req = alloc_smp_req(MI_REQ_SIZE);
+	if (!mi_req)
+		return -ENOMEM;
+
+	mi_resp = alloc_smp_resp(MI_RESP_SIZE);
+	if (!mi_resp) {
+		kfree(mi_req);
+		return -ENOMEM;
+	}
+
+	mi_req[1] = SMP_REPORT_MANUF_INFO;
+
+	res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
+	if (res) {
+		SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
+			    SAS_ADDR(dev->sas_addr), res);
+		goto out;
+	} else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
+		SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
+			    SAS_ADDR(dev->sas_addr), mi_resp[2]);
+		goto out;
+	}
+
+	ex_assign_manuf_info(dev, mi_resp);
+out:
+	kfree(mi_req);
+	kfree(mi_resp);
+	return res;
+}
+
+#define PC_REQ_SIZE  44
+#define PC_RESP_SIZE 8
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+			enum phy_func phy_func)
+{
+	u8 *pc_req;
+	u8 *pc_resp;
+	int res;
+
+	pc_req = alloc_smp_req(PC_REQ_SIZE);
+	if (!pc_req)
+		return -ENOMEM;
+
+	pc_resp = alloc_smp_resp(PC_RESP_SIZE);
+	if (!pc_resp) {
+		kfree(pc_req);
+		return -ENOMEM;
+	}
+
+	pc_req[1] = SMP_PHY_CONTROL;
+	pc_req[9] = phy_id;
+	pc_req[10]= phy_func;
+
+	res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
+
+	kfree(pc_resp);
+	kfree(pc_req);
+	return res;
+}
+
+static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+	sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE);
+	phy->linkrate = PHY_DISABLED;
+}
+
+static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
+			sas_ex_disable_phy(dev, i);
+	}
+}
+
+static int sas_dev_present_in_domain(struct asd_sas_port *port,
+					    u8 *sas_addr)
+{
+	struct domain_device *dev;
+
+	if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
+		return 1;
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
+			return 1;
+	}
+	return 0;
+}
+
+#define RPEL_REQ_SIZE	16
+#define RPEL_RESP_SIZE	32
+int sas_smp_get_phy_events(struct sas_phy *phy)
+{
+	int res;
+	struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+	struct domain_device *dev = sas_find_dev_by_rphy(rphy);
+	u8 *req = alloc_smp_req(RPEL_REQ_SIZE);
+	u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL);
+
+	if (!resp)
+		return -ENOMEM;
+
+	req[1] = SMP_REPORT_PHY_ERR_LOG;
+	req[9] = phy->number;
+
+	res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
+			            resp, RPEL_RESP_SIZE);
+
+	if (!res)
+		goto out;
+
+	phy->invalid_dword_count = scsi_to_u32(&resp[12]);
+	phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
+	phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
+	phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+
+ out:
+	kfree(resp);
+	return res;
+
+}
+
+#define RPS_REQ_SIZE  16
+#define RPS_RESP_SIZE 60
+
+static int sas_get_report_phy_sata(struct domain_device *dev,
+					  int phy_id,
+					  struct smp_resp *rps_resp)
+{
+	int res;
+	u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+
+	if (!rps_req)
+		return -ENOMEM;
+
+	rps_req[1] = SMP_REPORT_PHY_SATA;
+	rps_req[9] = phy_id;
+
+	res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
+			            rps_resp, RPS_RESP_SIZE);
+
+	kfree(rps_req);
+	return 0;
+}
+
+static void sas_ex_get_linkrate(struct domain_device *parent,
+				       struct domain_device *child,
+				       struct ex_phy *parent_phy)
+{
+	struct expander_device *parent_ex = &parent->ex_dev;
+	struct sas_port *port;
+	int i;
+
+	child->pathways = 0;
+
+	port = parent_phy->port;
+
+	for (i = 0; i < parent_ex->num_phys; i++) {
+		struct ex_phy *phy = &parent_ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(phy->attached_sas_addr) ==
+		    SAS_ADDR(child->sas_addr)) {
+
+			child->min_linkrate = min(parent->min_linkrate,
+						  phy->linkrate);
+			child->max_linkrate = max(parent->max_linkrate,
+						  phy->linkrate);
+			child->pathways++;
+			sas_port_add_phy(port, phy->phy);
+		}
+	}
+	child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
+	child->pathways = min(child->pathways, parent->pathways);
+}
+
+static struct domain_device *sas_ex_discover_end_dev(
+	struct domain_device *parent, int phy_id)
+{
+	struct expander_device *parent_ex = &parent->ex_dev;
+	struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	struct sas_rphy *rphy;
+	int res;
+
+	if (phy->attached_sata_host || phy->attached_sata_ps)
+		return NULL;
+
+	child = kzalloc(sizeof(*child), GFP_KERNEL);
+	if (!child)
+		return NULL;
+
+	child->parent = parent;
+	child->port   = parent->port;
+	child->iproto = phy->attached_iproto;
+	memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+	phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+	BUG_ON(!phy->port);
+	/* FIXME: better error handling*/
+	BUG_ON(sas_port_add(phy->port) != 0);
+	sas_ex_get_linkrate(parent, child, phy);
+
+	if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
+		child->dev_type = SATA_DEV;
+		if (phy->attached_tproto & SAS_PROTO_STP)
+			child->tproto = phy->attached_tproto;
+		if (phy->attached_sata_dev)
+			child->tproto |= SATA_DEV;
+		res = sas_get_report_phy_sata(parent, phy_id,
+					      &child->sata_dev.rps_resp);
+		if (res) {
+			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+				    "0x%x\n", SAS_ADDR(parent->sas_addr),
+				    phy_id, res);
+			kfree(child);
+			return NULL;
+		}
+		memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
+		       sizeof(struct dev_to_host_fis));
+		sas_init_dev(child);
+		res = sas_discover_sata(child);
+		if (res) {
+			SAS_DPRINTK("sas_discover_sata() for device %16llx at "
+				    "%016llx:0x%x returned 0x%x\n",
+				    SAS_ADDR(child->sas_addr),
+				    SAS_ADDR(parent->sas_addr), phy_id, res);
+			kfree(child);
+			return NULL;
+		}
+	} else if (phy->attached_tproto & SAS_PROTO_SSP) {
+		child->dev_type = SAS_END_DEV;
+		rphy = sas_end_device_alloc(phy->port);
+		/* FIXME: error handling */
+		BUG_ON(!rphy);
+		child->tproto = phy->attached_tproto;
+		sas_init_dev(child);
+
+		child->rphy = rphy;
+		sas_fill_in_rphy(child, rphy);
+
+		spin_lock(&parent->port->dev_list_lock);
+		list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+		spin_unlock(&parent->port->dev_list_lock);
+
+		res = sas_discover_end_dev(child);
+		if (res) {
+			SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
+				    "at %016llx:0x%x returned 0x%x\n",
+				    SAS_ADDR(child->sas_addr),
+				    SAS_ADDR(parent->sas_addr), phy_id, res);
+			/* FIXME: this kfrees list elements without removing them */
+			//kfree(child);
+			return NULL;
+		}
+	} else {
+		SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
+			    phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+			    phy_id);
+	}
+
+	list_add_tail(&child->siblings, &parent_ex->children);
+	return child;
+}
+
+static struct domain_device *sas_ex_discover_expander(
+	struct domain_device *parent, int phy_id)
+{
+	struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
+	struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	struct sas_rphy *rphy;
+	struct sas_expander_device *edev;
+	struct asd_sas_port *port;
+	int res;
+
+	if (phy->routing_attr == DIRECT_ROUTING) {
+		SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+			    "allowed\n",
+			    SAS_ADDR(parent->sas_addr), phy_id,
+			    SAS_ADDR(phy->attached_sas_addr),
+			    phy->attached_phy_id);
+		return NULL;
+	}
+	child = kzalloc(sizeof(*child), GFP_KERNEL);
+	if (!child)
+		return NULL;
+
+	phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+	/* FIXME: better error handling */
+	BUG_ON(sas_port_add(phy->port) != 0);
+
+
+	switch (phy->attached_dev_type) {
+	case EDGE_DEV:
+		rphy = sas_expander_alloc(phy->port,
+					  SAS_EDGE_EXPANDER_DEVICE);
+		break;
+	case FANOUT_DEV:
+		rphy = sas_expander_alloc(phy->port,
+					  SAS_FANOUT_EXPANDER_DEVICE);
+		break;
+	default:
+		rphy = NULL;	/* shut gcc up */
+		BUG();
+	}
+	port = parent->port;
+	child->rphy = rphy;
+	edev = rphy_to_expander_device(rphy);
+	child->dev_type = phy->attached_dev_type;
+	child->parent = parent;
+	child->port = port;
+	child->iproto = phy->attached_iproto;
+	child->tproto = phy->attached_tproto;
+	memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+	sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+	sas_ex_get_linkrate(parent, child, phy);
+	edev->level = parent_ex->level + 1;
+	parent->port->disc.max_level = max(parent->port->disc.max_level,
+					   edev->level);
+	sas_init_dev(child);
+	sas_fill_in_rphy(child, rphy);
+	sas_rphy_add(rphy);
+
+	spin_lock(&parent->port->dev_list_lock);
+	list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+	spin_unlock(&parent->port->dev_list_lock);
+
+	res = sas_discover_expander(child);
+	if (res) {
+		kfree(child);
+		return NULL;
+	}
+	list_add_tail(&child->siblings, &parent->ex_dev.children);
+	return child;
+}
+
+static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+	struct domain_device *child = NULL;
+	int res = 0;
+
+	/* Phy state */
+	if (ex_phy->linkrate == PHY_SPINUP_HOLD) {
+		if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET))
+			res = sas_ex_phy_discover(dev, phy_id);
+		if (res)
+			return res;
+	}
+
+	/* Parent and domain coherency */
+	if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+			     SAS_ADDR(dev->port->sas_addr))) {
+		sas_add_parent_port(dev, phy_id);
+		return 0;
+	}
+	if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+			    SAS_ADDR(dev->parent->sas_addr))) {
+		sas_add_parent_port(dev, phy_id);
+		if (ex_phy->routing_attr == TABLE_ROUTING)
+			sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
+		return 0;
+	}
+
+	if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
+		sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
+
+	if (ex_phy->attached_dev_type == NO_DEVICE) {
+		if (ex_phy->routing_attr == DIRECT_ROUTING) {
+			memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+			sas_configure_routing(dev, ex_phy->attached_sas_addr);
+		}
+		return 0;
+	} else if (ex_phy->linkrate == PHY_LINKRATE_UNKNOWN)
+		return 0;
+
+	if (ex_phy->attached_dev_type != SAS_END_DEV &&
+	    ex_phy->attached_dev_type != FANOUT_DEV &&
+	    ex_phy->attached_dev_type != EDGE_DEV) {
+		SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
+			    "phy 0x%x\n", ex_phy->attached_dev_type,
+			    SAS_ADDR(dev->sas_addr),
+			    phy_id);
+		return 0;
+	}
+
+	res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
+	if (res) {
+		SAS_DPRINTK("configure routing for dev %016llx "
+			    "reported 0x%x. Forgotten\n",
+			    SAS_ADDR(ex_phy->attached_sas_addr), res);
+		sas_disable_routing(dev, ex_phy->attached_sas_addr);
+		return res;
+	}
+
+	switch (ex_phy->attached_dev_type) {
+	case SAS_END_DEV:
+		child = sas_ex_discover_end_dev(dev, phy_id);
+		break;
+	case FANOUT_DEV:
+		if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
+			SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
+				    "attached to ex %016llx phy 0x%x\n",
+				    SAS_ADDR(ex_phy->attached_sas_addr),
+				    ex_phy->attached_phy_id,
+				    SAS_ADDR(dev->sas_addr),
+				    phy_id);
+			sas_ex_disable_phy(dev, phy_id);
+			break;
+		} else
+			memcpy(dev->port->disc.fanout_sas_addr,
+			       ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
+		/* fallthrough */
+	case EDGE_DEV:
+		child = sas_ex_discover_expander(dev, phy_id);
+		break;
+	default:
+		break;
+	}
+
+	if (child) {
+		int i;
+
+		for (i = 0; i < ex->num_phys; i++) {
+			if (ex->ex_phy[i].phy_state == PHY_VACANT ||
+			    ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
+				continue;
+
+			if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
+			    SAS_ADDR(child->sas_addr))
+				ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+		}
+	}
+
+	return res;
+}
+
+static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if ((phy->attached_dev_type == EDGE_DEV ||
+		     phy->attached_dev_type == FANOUT_DEV) &&
+		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+			memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
+
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int sas_check_level_subtractive_boundary(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct domain_device *child;
+	u8 sub_addr[8] = {0, };
+
+	list_for_each_entry(child, &ex->children, siblings) {
+		if (child->dev_type != EDGE_DEV &&
+		    child->dev_type != FANOUT_DEV)
+			continue;
+		if (sub_addr[0] == 0) {
+			sas_find_sub_addr(child, sub_addr);
+			continue;
+		} else {
+			u8 s2[8];
+
+			if (sas_find_sub_addr(child, s2) &&
+			    (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
+
+				SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
+					    "diverges from subtractive "
+					    "boundary %016llx\n",
+					    SAS_ADDR(dev->sas_addr),
+					    SAS_ADDR(child->sas_addr),
+					    SAS_ADDR(s2),
+					    SAS_ADDR(sub_addr));
+
+				sas_ex_disable_port(child, s2);
+			}
+		}
+	}
+	return 0;
+}
+/**
+ * sas_ex_discover_devices -- discover devices attached to this expander
+ * dev: pointer to the expander domain device
+ * single: if you want to do a single phy, else set to -1;
+ *
+ * Configure this expander for use with its devices and register the
+ * devices of this expander.
+ */
+static int sas_ex_discover_devices(struct domain_device *dev, int single)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i = 0, end = ex->num_phys;
+	int res = 0;
+
+	if (0 <= single && single < end) {
+		i = single;
+		end = i+1;
+	}
+
+	for ( ; i < end; i++) {
+		struct ex_phy *ex_phy = &ex->ex_phy[i];
+
+		if (ex_phy->phy_state == PHY_VACANT ||
+		    ex_phy->phy_state == PHY_NOT_PRESENT ||
+		    ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
+			continue;
+
+		switch (ex_phy->linkrate) {
+		case PHY_DISABLED:
+		case PHY_RESET_PROBLEM:
+		case PHY_PORT_SELECTOR:
+			continue;
+		default:
+			res = sas_ex_discover_dev(dev, i);
+			if (res)
+				break;
+			continue;
+		}
+	}
+
+	if (!res)
+		sas_check_level_subtractive_boundary(dev);
+
+	return res;
+}
+
+static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int i;
+	u8  *sub_sas_addr = NULL;
+
+	if (dev->dev_type != EDGE_DEV)
+		return 0;
+
+	for (i = 0; i < ex->num_phys; i++) {
+		struct ex_phy *phy = &ex->ex_phy[i];
+
+		if (phy->phy_state == PHY_VACANT ||
+		    phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if ((phy->attached_dev_type == FANOUT_DEV ||
+		     phy->attached_dev_type == EDGE_DEV) &&
+		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+			if (!sub_sas_addr)
+				sub_sas_addr = &phy->attached_sas_addr[0];
+			else if (SAS_ADDR(sub_sas_addr) !=
+				 SAS_ADDR(phy->attached_sas_addr)) {
+
+				SAS_DPRINTK("ex %016llx phy 0x%x "
+					    "diverges(%016llx) on subtractive "
+					    "boundary(%016llx). Disabled\n",
+					    SAS_ADDR(dev->sas_addr), i,
+					    SAS_ADDR(phy->attached_sas_addr),
+					    SAS_ADDR(sub_sas_addr));
+				sas_ex_disable_phy(dev, i);
+			}
+		}
+	}
+	return 0;
+}
+
+static void sas_print_parent_topology_bug(struct domain_device *child,
+						 struct ex_phy *parent_phy,
+						 struct ex_phy *child_phy)
+{
+	static const char ra_char[] = {
+		[DIRECT_ROUTING] = 'D',
+		[SUBTRACTIVE_ROUTING] = 'S',
+		[TABLE_ROUTING] = 'T',
+	};
+	static const char *ex_type[] = {
+		[EDGE_DEV] = "edge",
+		[FANOUT_DEV] = "fanout",
+	};
+	struct domain_device *parent = child->parent;
+
+	sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
+		   "has %c:%c routing link!\n",
+
+		   ex_type[parent->dev_type],
+		   SAS_ADDR(parent->sas_addr),
+		   parent_phy->phy_id,
+
+		   ex_type[child->dev_type],
+		   SAS_ADDR(child->sas_addr),
+		   child_phy->phy_id,
+
+		   ra_char[parent_phy->routing_attr],
+		   ra_char[child_phy->routing_attr]);
+}
+
+static int sas_check_eeds(struct domain_device *child,
+				 struct ex_phy *parent_phy,
+				 struct ex_phy *child_phy)
+{
+	int res = 0;
+	struct domain_device *parent = child->parent;
+
+	if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
+		res = -ENODEV;
+		SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+			    "phy S:0x%x, while there is a fanout ex %016llx\n",
+			    SAS_ADDR(parent->sas_addr),
+			    parent_phy->phy_id,
+			    SAS_ADDR(child->sas_addr),
+			    child_phy->phy_id,
+			    SAS_ADDR(parent->port->disc.fanout_sas_addr));
+	} else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
+		memcpy(parent->port->disc.eeds_a, parent->sas_addr,
+		       SAS_ADDR_SIZE);
+		memcpy(parent->port->disc.eeds_b, child->sas_addr,
+		       SAS_ADDR_SIZE);
+	} else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
+		    SAS_ADDR(parent->sas_addr)) ||
+		   (SAS_ADDR(parent->port->disc.eeds_a) ==
+		    SAS_ADDR(child->sas_addr)))
+		   &&
+		   ((SAS_ADDR(parent->port->disc.eeds_b) ==
+		     SAS_ADDR(parent->sas_addr)) ||
+		    (SAS_ADDR(parent->port->disc.eeds_b) ==
+		     SAS_ADDR(child->sas_addr))))
+		;
+	else {
+		res = -ENODEV;
+		SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+			    "phy 0x%x link forms a third EEDS!\n",
+			    SAS_ADDR(parent->sas_addr),
+			    parent_phy->phy_id,
+			    SAS_ADDR(child->sas_addr),
+			    child_phy->phy_id);
+	}
+
+	return res;
+}
+
+/* Here we spill over 80 columns.  It is intentional.
+ */
+static int sas_check_parent_topology(struct domain_device *child)
+{
+	struct expander_device *child_ex = &child->ex_dev;
+	struct expander_device *parent_ex;
+	int i;
+	int res = 0;
+
+	if (!child->parent)
+		return 0;
+
+	if (child->parent->dev_type != EDGE_DEV &&
+	    child->parent->dev_type != FANOUT_DEV)
+		return 0;
+
+	parent_ex = &child->parent->ex_dev;
+
+	for (i = 0; i < parent_ex->num_phys; i++) {
+		struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
+		struct ex_phy *child_phy;
+
+		if (parent_phy->phy_state == PHY_VACANT ||
+		    parent_phy->phy_state == PHY_NOT_PRESENT)
+			continue;
+
+		if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+			continue;
+
+		child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
+
+		switch (child->parent->dev_type) {
+		case EDGE_DEV:
+			if (child->dev_type == FANOUT_DEV) {
+				if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
+				    child_phy->routing_attr != TABLE_ROUTING) {
+					sas_print_parent_topology_bug(child, parent_phy, child_phy);
+					res = -ENODEV;
+				}
+			} else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+				if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+					res = sas_check_eeds(child, parent_phy, child_phy);
+				} else if (child_phy->routing_attr != TABLE_ROUTING) {
+					sas_print_parent_topology_bug(child, parent_phy, child_phy);
+					res = -ENODEV;
+				}
+			} else if (parent_phy->routing_attr == TABLE_ROUTING &&
+				   child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+				sas_print_parent_topology_bug(child, parent_phy, child_phy);
+				res = -ENODEV;
+			}
+			break;
+		case FANOUT_DEV:
+			if (parent_phy->routing_attr != TABLE_ROUTING ||
+			    child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+				sas_print_parent_topology_bug(child, parent_phy, child_phy);
+				res = -ENODEV;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return res;
+}
+
+#define RRI_REQ_SIZE  16
+#define RRI_RESP_SIZE 44
+
+static int sas_configure_present(struct domain_device *dev, int phy_id,
+				 u8 *sas_addr, int *index, int *present)
+{
+	int i, res = 0;
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	u8 *rri_req;
+	u8 *rri_resp;
+
+	*present = 0;
+	*index = 0;
+
+	rri_req = alloc_smp_req(RRI_REQ_SIZE);
+	if (!rri_req)
+		return -ENOMEM;
+
+	rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
+	if (!rri_resp) {
+		kfree(rri_req);
+		return -ENOMEM;
+	}
+
+	rri_req[1] = SMP_REPORT_ROUTE_INFO;
+	rri_req[9] = phy_id;
+
+	for (i = 0; i < ex->max_route_indexes ; i++) {
+		*(__be16 *)(rri_req+6) = cpu_to_be16(i);
+		res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
+				       RRI_RESP_SIZE);
+		if (res)
+			goto out;
+		res = rri_resp[2];
+		if (res == SMP_RESP_NO_INDEX) {
+			SAS_DPRINTK("overflow of indexes: dev %016llx "
+				    "phy 0x%x index 0x%x\n",
+				    SAS_ADDR(dev->sas_addr), phy_id, i);
+			goto out;
+		} else if (res != SMP_RESP_FUNC_ACC) {
+			SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
+				    "result 0x%x\n", __FUNCTION__,
+				    SAS_ADDR(dev->sas_addr), phy_id, i, res);
+			goto out;
+		}
+		if (SAS_ADDR(sas_addr) != 0) {
+			if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
+				*index = i;
+				if ((rri_resp[12] & 0x80) == 0x80)
+					*present = 0;
+				else
+					*present = 1;
+				goto out;
+			} else if (SAS_ADDR(rri_resp+16) == 0) {
+				*index = i;
+				*present = 0;
+				goto out;
+			}
+		} else if (SAS_ADDR(rri_resp+16) == 0 &&
+			   phy->last_da_index < i) {
+			phy->last_da_index = i;
+			*index = i;
+			*present = 0;
+			goto out;
+		}
+	}
+	res = -1;
+out:
+	kfree(rri_req);
+	kfree(rri_resp);
+	return res;
+}
+
+#define CRI_REQ_SIZE  44
+#define CRI_RESP_SIZE  8
+
+static int sas_configure_set(struct domain_device *dev, int phy_id,
+			     u8 *sas_addr, int index, int include)
+{
+	int res;
+	u8 *cri_req;
+	u8 *cri_resp;
+
+	cri_req = alloc_smp_req(CRI_REQ_SIZE);
+	if (!cri_req)
+		return -ENOMEM;
+
+	cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
+	if (!cri_resp) {
+		kfree(cri_req);
+		return -ENOMEM;
+	}
+
+	cri_req[1] = SMP_CONF_ROUTE_INFO;
+	*(__be16 *)(cri_req+6) = cpu_to_be16(index);
+	cri_req[9] = phy_id;
+	if (SAS_ADDR(sas_addr) == 0 || !include)
+		cri_req[12] |= 0x80;
+	memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
+
+	res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
+			       CRI_RESP_SIZE);
+	if (res)
+		goto out;
+	res = cri_resp[2];
+	if (res == SMP_RESP_NO_INDEX) {
+		SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
+			    "index 0x%x\n",
+			    SAS_ADDR(dev->sas_addr), phy_id, index);
+	}
+out:
+	kfree(cri_req);
+	kfree(cri_resp);
+	return res;
+}
+
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+				    u8 *sas_addr, int include)
+{
+	int index;
+	int present;
+	int res;
+
+	res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
+	if (res)
+		return res;
+	if (include ^ present)
+		return sas_configure_set(dev, phy_id, sas_addr, index,include);
+
+	return res;
+}
+
+/**
+ * sas_configure_parent -- configure routing table of parent
+ * parent: parent expander
+ * child: child expander
+ * sas_addr: SAS port identifier of device directly attached to child
+ */
+static int sas_configure_parent(struct domain_device *parent,
+				struct domain_device *child,
+				u8 *sas_addr, int include)
+{
+	struct expander_device *ex_parent = &parent->ex_dev;
+	int res = 0;
+	int i;
+
+	if (parent->parent) {
+		res = sas_configure_parent(parent->parent, parent, sas_addr,
+					   include);
+		if (res)
+			return res;
+	}
+
+	if (ex_parent->conf_route_table == 0) {
+		SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
+			    SAS_ADDR(parent->sas_addr));
+		return 0;
+	}
+
+	for (i = 0; i < ex_parent->num_phys; i++) {
+		struct ex_phy *phy = &ex_parent->ex_phy[i];
+
+		if ((phy->routing_attr == TABLE_ROUTING) &&
+		    (SAS_ADDR(phy->attached_sas_addr) ==
+		     SAS_ADDR(child->sas_addr))) {
+			res = sas_configure_phy(parent, i, sas_addr, include);
+			if (res)
+				return res;
+		}
+	}
+
+	return res;
+}
+
+/**
+ * sas_configure_routing -- configure routing
+ * dev: expander device
+ * sas_addr: port identifier of device directly attached to the expander device
+ */
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
+{
+	if (dev->parent)
+		return sas_configure_parent(dev->parent, dev, sas_addr, 1);
+	return 0;
+}
+
+static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
+{
+	if (dev->parent)
+		return sas_configure_parent(dev->parent, dev, sas_addr, 0);
+	return 0;
+}
+
+#if 0
+#define SMP_BIN_ATTR_NAME "smp_portal"
+
+static void sas_ex_smp_hook(struct domain_device *dev)
+{
+	struct expander_device *ex_dev = &dev->ex_dev;
+	struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
+
+	memset(bin_attr, 0, sizeof(*bin_attr));
+
+	bin_attr->attr.name = SMP_BIN_ATTR_NAME;
+	bin_attr->attr.owner = THIS_MODULE;
+	bin_attr->attr.mode = 0600;
+
+	bin_attr->size = 0;
+	bin_attr->private = NULL;
+	bin_attr->read = smp_portal_read;
+	bin_attr->write= smp_portal_write;
+	bin_attr->mmap = NULL;
+
+	ex_dev->smp_portal_pid = -1;
+	init_MUTEX(&ex_dev->smp_sema);
+}
+#endif
+
+/**
+ * sas_discover_expander -- expander discovery
+ * @ex: pointer to expander domain device
+ *
+ * See comment in sas_discover_sata().
+ */
+static int sas_discover_expander(struct domain_device *dev)
+{
+	int res;
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	res = sas_ex_general(dev);
+	if (res)
+		goto out_err;
+	res = sas_ex_manuf_info(dev);
+	if (res)
+		goto out_err;
+
+	res = sas_expander_discover(dev);
+	if (res) {
+		SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
+			    SAS_ADDR(dev->sas_addr), res);
+		goto out_err;
+	}
+
+	sas_check_ex_subtractive_boundary(dev);
+	res = sas_check_parent_topology(dev);
+	if (res)
+		goto out_err;
+	return 0;
+out_err:
+	sas_notify_lldd_dev_gone(dev);
+	return res;
+}
+
+static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
+{
+	int res = 0;
+	struct domain_device *dev;
+
+	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+		if (dev->dev_type == EDGE_DEV ||
+		    dev->dev_type == FANOUT_DEV) {
+			struct sas_expander_device *ex =
+				rphy_to_expander_device(dev->rphy);
+
+			if (level == ex->level)
+				res = sas_ex_discover_devices(dev, -1);
+			else if (level > 0)
+				res = sas_ex_discover_devices(port->port_dev, -1);
+
+		}
+	}
+
+	return res;
+}
+
+static int sas_ex_bfs_disc(struct asd_sas_port *port)
+{
+	int res;
+	int level;
+
+	do {
+		level = port->disc.max_level;
+		res = sas_ex_level_discovery(port, level);
+		mb();
+	} while (level < port->disc.max_level);
+
+	return res;
+}
+
+int sas_discover_root_expander(struct domain_device *dev)
+{
+	int res;
+	struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+
+	sas_rphy_add(dev->rphy);
+
+	ex->level = dev->port->disc.max_level; /* 0 */
+	res = sas_discover_expander(dev);
+	if (!res)
+		sas_ex_bfs_disc(dev->port);
+
+	return res;
+}
+
+/* ---------- Domain revalidation ---------- */
+
+static int sas_get_phy_discover(struct domain_device *dev,
+				int phy_id, struct smp_resp *disc_resp)
+{
+	int res;
+	u8 *disc_req;
+
+	disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+	if (!disc_req)
+		return -ENOMEM;
+
+	disc_req[1] = SMP_DISCOVER;
+	disc_req[9] = phy_id;
+
+	res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+			       disc_resp, DISCOVER_RESP_SIZE);
+	if (res)
+		goto out;
+	else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+		res = disc_resp->result;
+		goto out;
+	}
+out:
+	kfree(disc_req);
+	return res;
+}
+
+static int sas_get_phy_change_count(struct domain_device *dev,
+				    int phy_id, int *pcc)
+{
+	int res;
+	struct smp_resp *disc_resp;
+
+	disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+	if (!disc_resp)
+		return -ENOMEM;
+
+	res = sas_get_phy_discover(dev, phy_id, disc_resp);
+	if (!res)
+		*pcc = disc_resp->disc.change_count;
+
+	kfree(disc_resp);
+	return res;
+}
+
+static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
+					 int phy_id, u8 *attached_sas_addr)
+{
+	int res;
+	struct smp_resp *disc_resp;
+	struct discover_resp *dr;
+
+	disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+	if (!disc_resp)
+		return -ENOMEM;
+	dr = &disc_resp->disc;
+
+	res = sas_get_phy_discover(dev, phy_id, disc_resp);
+	if (!res) {
+		memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
+		if (dr->attached_dev_type == 0)
+			memset(attached_sas_addr, 0, 8);
+	}
+	kfree(disc_resp);
+	return res;
+}
+
+static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
+			      int from_phy)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int res = 0;
+	int i;
+
+	for (i = from_phy; i < ex->num_phys; i++) {
+		int phy_change_count = 0;
+
+		res = sas_get_phy_change_count(dev, i, &phy_change_count);
+		if (res)
+			goto out;
+		else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+			ex->ex_phy[i].phy_change_count = phy_change_count;
+			*phy_id = i;
+			return 0;
+		}
+	}
+out:
+	return res;
+}
+
+static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
+{
+	int res;
+	u8  *rg_req;
+	struct smp_resp  *rg_resp;
+
+	rg_req = alloc_smp_req(RG_REQ_SIZE);
+	if (!rg_req)
+		return -ENOMEM;
+
+	rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+	if (!rg_resp) {
+		kfree(rg_req);
+		return -ENOMEM;
+	}
+
+	rg_req[1] = SMP_REPORT_GENERAL;
+
+	res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+			       RG_RESP_SIZE);
+	if (res)
+		goto out;
+	if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+		res = rg_resp->result;
+		goto out;
+	}
+
+	*ecc = be16_to_cpu(rg_resp->rg.change_count);
+out:
+	kfree(rg_resp);
+	kfree(rg_req);
+	return res;
+}
+
+static int sas_find_bcast_dev(struct domain_device *dev,
+			      struct domain_device **src_dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	int ex_change_count = -1;
+	int res;
+
+	res = sas_get_ex_change_count(dev, &ex_change_count);
+	if (res)
+		goto out;
+	if (ex_change_count != -1 &&
+	    ex_change_count != ex->ex_change_count) {
+		*src_dev = dev;
+		ex->ex_change_count = ex_change_count;
+	} else {
+		struct domain_device *ch;
+
+		list_for_each_entry(ch, &ex->children, siblings) {
+			if (ch->dev_type == EDGE_DEV ||
+			    ch->dev_type == FANOUT_DEV) {
+				res = sas_find_bcast_dev(ch, src_dev);
+				if (src_dev)
+					return res;
+			}
+		}
+	}
+out:
+	return res;
+}
+
+static void sas_unregister_ex_tree(struct domain_device *dev)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct domain_device *child, *n;
+
+	list_for_each_entry_safe(child, n, &ex->children, siblings) {
+		if (child->dev_type == EDGE_DEV ||
+		    child->dev_type == FANOUT_DEV)
+			sas_unregister_ex_tree(child);
+		else
+			sas_unregister_dev(child);
+	}
+	sas_unregister_dev(dev);
+}
+
+static void sas_unregister_devs_sas_addr(struct domain_device *parent,
+					 int phy_id)
+{
+	struct expander_device *ex_dev = &parent->ex_dev;
+	struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
+	struct domain_device *child, *n;
+
+	list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
+		if (SAS_ADDR(child->sas_addr) ==
+		    SAS_ADDR(phy->attached_sas_addr)) {
+			if (child->dev_type == EDGE_DEV ||
+			    child->dev_type == FANOUT_DEV)
+				sas_unregister_ex_tree(child);
+			else
+				sas_unregister_dev(child);
+			break;
+		}
+	}
+	sas_disable_routing(parent, phy->attached_sas_addr);
+	memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+	sas_port_delete_phy(phy->port, phy->phy);
+	if (phy->port->num_phys == 0)
+		sas_port_delete(phy->port);
+	phy->port = NULL;
+}
+
+static int sas_discover_bfs_by_root_level(struct domain_device *root,
+					  const int level)
+{
+	struct expander_device *ex_root = &root->ex_dev;
+	struct domain_device *child;
+	int res = 0;
+
+	list_for_each_entry(child, &ex_root->children, siblings) {
+		if (child->dev_type == EDGE_DEV ||
+		    child->dev_type == FANOUT_DEV) {
+			struct sas_expander_device *ex =
+				rphy_to_expander_device(child->rphy);
+
+			if (level > ex->level)
+				res = sas_discover_bfs_by_root_level(child,
+								     level);
+			else if (level == ex->level)
+				res = sas_ex_discover_devices(child, -1);
+		}
+	}
+	return res;
+}
+
+static int sas_discover_bfs_by_root(struct domain_device *dev)
+{
+	int res;
+	struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+	int level = ex->level+1;
+
+	res = sas_ex_discover_devices(dev, -1);
+	if (res)
+		goto out;
+	do {
+		res = sas_discover_bfs_by_root_level(dev, level);
+		mb();
+		level += 1;
+	} while (level <= dev->port->disc.max_level);
+out:
+	return res;
+}
+
+static int sas_discover_new(struct domain_device *dev, int phy_id)
+{
+	struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
+	struct domain_device *child;
+	int res;
+
+	SAS_DPRINTK("ex %016llx phy%d new device attached\n",
+		    SAS_ADDR(dev->sas_addr), phy_id);
+	res = sas_ex_phy_discover(dev, phy_id);
+	if (res)
+		goto out;
+	res = sas_ex_discover_devices(dev, phy_id);
+	if (res)
+		goto out;
+	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
+		if (SAS_ADDR(child->sas_addr) ==
+		    SAS_ADDR(ex_phy->attached_sas_addr)) {
+			if (child->dev_type == EDGE_DEV ||
+			    child->dev_type == FANOUT_DEV)
+				res = sas_discover_bfs_by_root(child);
+			break;
+		}
+	}
+out:
+	return res;
+}
+
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *phy = &ex->ex_phy[phy_id];
+	u8 attached_sas_addr[8];
+	int res;
+
+	res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
+	switch (res) {
+	case SMP_RESP_NO_PHY:
+		phy->phy_state = PHY_NOT_PRESENT;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+		goto out; break;
+	case SMP_RESP_PHY_VACANT:
+		phy->phy_state = PHY_VACANT;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+		goto out; break;
+	case SMP_RESP_FUNC_ACC:
+		break;
+	}
+
+	if (SAS_ADDR(attached_sas_addr) == 0) {
+		phy->phy_state = PHY_EMPTY;
+		sas_unregister_devs_sas_addr(dev, phy_id);
+	} else if (SAS_ADDR(attached_sas_addr) ==
+		   SAS_ADDR(phy->attached_sas_addr)) {
+		SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
+			    SAS_ADDR(dev->sas_addr), phy_id);
+	} else
+		res = sas_discover_new(dev, phy_id);
+out:
+	return res;
+}
+
+static int sas_rediscover(struct domain_device *dev, const int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
+	int res = 0;
+	int i;
+
+	SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+		    SAS_ADDR(dev->sas_addr), phy_id);
+
+	if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
+		for (i = 0; i < ex->num_phys; i++) {
+			struct ex_phy *phy = &ex->ex_phy[i];
+
+			if (i == phy_id)
+				continue;
+			if (SAS_ADDR(phy->attached_sas_addr) ==
+			    SAS_ADDR(changed_phy->attached_sas_addr)) {
+				SAS_DPRINTK("phy%d part of wide port with "
+					    "phy%d\n", phy_id, i);
+				goto out;
+			}
+		}
+		res = sas_rediscover_dev(dev, phy_id);
+	} else
+		res = sas_discover_new(dev, phy_id);
+out:
+	return res;
+}
+
+/**
+ * sas_revalidate_domain -- revalidate the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered.  Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+int sas_ex_revalidate_domain(struct domain_device *port_dev)
+{
+	int res;
+	struct domain_device *dev = NULL;
+
+	res = sas_find_bcast_dev(port_dev, &dev);
+	if (res)
+		goto out;
+	if (dev) {
+		struct expander_device *ex = &dev->ex_dev;
+		int i = 0, phy_id;
+
+		do {
+			phy_id = -1;
+			res = sas_find_bcast_phy(dev, &phy_id, i);
+			if (phy_id == -1)
+				break;
+			res = sas_rediscover(dev, phy_id);
+			i = phy_id + 1;
+		} while (i < ex->num_phys);
+	}
+out:
+	return res;
+}
+
+#if 0
+/* ---------- SMP portal ---------- */
+
+static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
+				size_t size)
+{
+	struct domain_device *dev = to_dom_device(kobj);
+	struct expander_device *ex = &dev->ex_dev;
+
+	if (offs != 0)
+		return -EFBIG;
+	else if (size == 0)
+		return 0;
+
+	down_interruptible(&ex->smp_sema);
+	if (ex->smp_req)
+		kfree(ex->smp_req);
+	ex->smp_req = kzalloc(size, GFP_USER);
+	if (!ex->smp_req) {
+		up(&ex->smp_sema);
+		return -ENOMEM;
+	}
+	memcpy(ex->smp_req, buf, size);
+	ex->smp_req_size = size;
+	ex->smp_portal_pid = current->pid;
+	up(&ex->smp_sema);
+
+	return size;
+}
+
+static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
+			       size_t size)
+{
+	struct domain_device *dev = to_dom_device(kobj);
+	struct expander_device *ex = &dev->ex_dev;
+	u8 *smp_resp;
+	int res = -EINVAL;
+
+	/* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
+	 *  it should be 0.
+	 */
+
+	down_interruptible(&ex->smp_sema);
+	if (!ex->smp_req || ex->smp_portal_pid != current->pid)
+		goto out;
+
+	res = 0;
+	if (size == 0)
+		goto out;
+
+	res = -ENOMEM;
+	smp_resp = alloc_smp_resp(size);
+	if (!smp_resp)
+		goto out;
+	res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
+			       smp_resp, size);
+	if (!res) {
+		memcpy(buf, smp_resp, size);
+		res = size;
+	}
+
+	kfree(smp_resp);
+out:
+	kfree(ex->smp_req);
+	ex->smp_req = NULL;
+	ex->smp_req_size = 0;
+	ex->smp_portal_pid = -1;
+	up(&ex->smp_sema);
+	return res;
+}
+#endif
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
new file mode 100644
index 0000000..b961664
--- /dev/null
+++ b/drivers/scsi/libsas/sas_init.c
@@ -0,0 +1,227 @@
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+kmem_cache_t *sas_task_cache;
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+        const u32 poly = 0x00DB2777;
+        u32     r = 0;
+        int     i;
+
+        for (i = 0; i < 8; i++) {
+                int b;
+                for (b = 7; b >= 0; b--) {
+                        r <<= 1;
+                        if ((1 << b) & sas_addr[i]) {
+                                if (!(r & 0x01000000))
+                                        r ^= poly;
+                        } else if (r & 0x01000000)
+                                r ^= poly;
+                }
+        }
+
+        hashed[0] = (r >> 16) & 0xFF;
+        hashed[1] = (r >> 8) & 0xFF ;
+        hashed[2] = r & 0xFF;
+}
+
+
+/* ---------- HA events ---------- */
+
+void sas_hae_reset(void *data)
+{
+	struct sas_ha_struct *ha = data;
+
+	sas_begin_event(HAE_RESET, &ha->event_lock,
+			&ha->pending);
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+	int error = 0;
+
+	spin_lock_init(&sas_ha->phy_port_lock);
+	sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+	if (sas_ha->lldd_queue_size == 0)
+		sas_ha->lldd_queue_size = 1;
+	else if (sas_ha->lldd_queue_size == -1)
+		sas_ha->lldd_queue_size = 128; /* Sanity */
+
+	error = sas_register_phys(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+		return error;
+	}
+
+	error = sas_register_ports(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+		goto Undo_phys;
+	}
+
+	error = sas_init_events(sas_ha);
+	if (error) {
+		printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+		goto Undo_ports;
+	}
+
+	if (sas_ha->lldd_max_execute_num > 1) {
+		error = sas_init_queue(sas_ha);
+		if (error) {
+			printk(KERN_NOTICE "couldn't start queue thread:%d, "
+			       "running in direct mode\n", error);
+			sas_ha->lldd_max_execute_num = 1;
+		}
+	}
+
+	return 0;
+
+Undo_ports:
+	sas_unregister_ports(sas_ha);
+Undo_phys:
+
+	return error;
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+	if (sas_ha->lldd_max_execute_num > 1) {
+		sas_shutdown_queue(sas_ha);
+	}
+
+	sas_unregister_ports(sas_ha);
+
+	return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+	if (scsi_is_sas_phy_local(phy))
+		/* FIXME: we have no local phy stats
+		 * gathering at this time */
+		return -EINVAL;
+
+	return sas_smp_get_phy_events(phy);
+}
+
+static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	int ret;
+	enum phy_func reset_type;
+
+	if (hard_reset)
+		reset_type = PHY_FUNC_HARD_RESET;
+	else
+		reset_type = PHY_FUNC_LINK_RESET;
+
+	if (scsi_is_sas_phy_local(phy)) {
+		struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+		struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+		struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+		struct sas_internal *i =
+			to_sas_internal(sas_ha->core.shost->transportt);
+
+		ret = i->dft->lldd_control_phy(asd_phy, reset_type);
+	} else {
+		struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+		struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+		ret = sas_smp_phy_control(ddev, phy->number, reset_type);
+	}
+	return ret;
+}
+
+static struct sas_function_template sft = {
+	.phy_reset = sas_phy_reset,
+	.get_linkerrors = sas_get_linkerrors,
+};
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+	struct scsi_transport_template *stt = sas_attach_transport(&sft);
+	struct sas_internal *i;
+
+	if (!stt)
+		return stt;
+
+	i = to_sas_internal(stt);
+	i->dft = dft;
+	stt->create_work_queue = 1;
+	stt->eh_timed_out = sas_scsi_timed_out;
+	stt->eh_strategy_handler = sas_scsi_recover_host;
+
+	return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+void sas_domain_release_transport(struct scsi_transport_template *stt)
+{
+	sas_release_transport(stt);
+}
+EXPORT_SYMBOL_GPL(sas_domain_release_transport);
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+	sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
+					   0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+	if (!sas_task_cache)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __exit sas_class_exit(void)
+{
+	kmem_cache_destroy(sas_task_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
new file mode 100644
index 0000000..89c3976
--- /dev/null
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -0,0 +1,146 @@
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/libsas.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#ifdef SAS_DEBUG
+#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+#else
+#define SAS_DPRINTK(fmt, ...)
+#endif
+
+void sas_scsi_recover_host(struct Scsi_Host *shost);
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_proto proto, char *buf);
+int sas_show_linkrate(enum sas_phy_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int  sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+int  sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
+
+int  sas_init_queue(struct sas_ha_struct *sas_ha);
+int  sas_init_events(struct sas_ha_struct *sas_ha);
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
+
+void sas_deform_port(struct asd_sas_phy *phy);
+
+void sas_porte_bytes_dmaed(void *);
+void sas_porte_broadcast_rcvd(void *);
+void sas_porte_link_reset_err(void *);
+void sas_porte_timer_event(void *);
+void sas_porte_hard_reset(void *);
+
+int sas_notify_lldd_dev_found(struct domain_device *);
+void sas_notify_lldd_dev_gone(struct domain_device *);
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+			enum phy_func phy_func);
+int sas_smp_get_phy_events(struct sas_phy *phy);
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
+
+void sas_hae_reset(void *);
+
+static inline void sas_queue_event(int event, spinlock_t *lock,
+				   unsigned long *pending,
+				   struct work_struct *work,
+				   struct Scsi_Host *shost)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
+	if (test_bit(event, pending)) {
+		spin_unlock_irqrestore(lock, flags);
+		return;
+	}
+	__set_bit(event, pending);
+	spin_unlock_irqrestore(lock, flags);
+	scsi_queue_work(shost, work);
+}
+
+static inline void sas_begin_event(int event, spinlock_t *lock,
+				   unsigned long *pending)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
+	__clear_bit(event, pending);
+	spin_unlock_irqrestore(lock, flags);
+}
+
+static inline void sas_fill_in_rphy(struct domain_device *dev,
+				    struct sas_rphy *rphy)
+{
+	rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
+	rphy->identify.initiator_port_protocols = dev->iproto;
+	rphy->identify.target_port_protocols = dev->tproto;
+	switch (dev->dev_type) {
+	case SATA_DEV:
+		/* FIXME: need sata device type */
+	case SAS_END_DEV:
+		rphy->identify.device_type = SAS_END_DEVICE;
+		break;
+	case EDGE_DEV:
+		rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
+		break;
+	case FANOUT_DEV:
+		rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
+		break;
+	default:
+		rphy->identify.device_type = SAS_PHY_UNUSED;
+		break;
+	}
+}
+
+static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
+{
+	struct expander_device *ex = &dev->ex_dev;
+	struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+
+	if (!ex->parent_port) {
+		ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
+		/* FIXME: error handling */
+		BUG_ON(!ex->parent_port);
+		BUG_ON(sas_port_add(ex->parent_port));
+		sas_port_mark_backlink(ex->parent_port);
+	}
+	sas_port_add_phy(ex->parent_port, ex_phy->phy);
+}
+
+#endif /* _SAS_INTERNAL_H_ */
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
new file mode 100644
index 0000000..024ab00
--- /dev/null
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -0,0 +1,157 @@
+/*
+ * Serial Attached SCSI (SAS) Phy class
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Phy events ---------- */
+
+static void sas_phye_loss_of_signal(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+	phy->error = 0;
+	sas_deform_port(phy);
+}
+
+static void sas_phye_oob_done(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+	phy->error = 0;
+}
+
+static void sas_phye_oob_error(void *data)
+{
+	struct asd_sas_phy *phy = data;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *i =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+
+	sas_deform_port(phy);
+
+	if (!port && phy->enabled && i->dft->lldd_control_phy) {
+		phy->error++;
+		switch (phy->error) {
+		case 1:
+		case 2:
+			i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET);
+			break;
+		case 3:
+		default:
+			phy->error = 0;
+			phy->enabled = 0;
+			i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE);
+			break;
+		}
+	}
+}
+
+static void sas_phye_spinup_hold(void *data)
+{
+	struct asd_sas_phy *phy = data;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct sas_internal *i =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
+			&phy->phy_events_pending);
+
+	phy->error = 0;
+	i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD);
+}
+
+/* ---------- Phy class registration ---------- */
+
+int sas_register_phys(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = {
+		[PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+		[PHYE_OOB_DONE] = sas_phye_oob_done,
+		[PHYE_OOB_ERROR] = sas_phye_oob_error,
+		[PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+	};
+
+	static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = {
+		[PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+		[PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+		[PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+		[PORTE_TIMER_EVENT] = sas_porte_timer_event,
+		[PORTE_HARD_RESET] = sas_porte_hard_reset,
+	};
+
+	/* Now register the phys. */
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		int k;
+		struct asd_sas_phy *phy = sas_ha->sas_phy[i];
+
+		phy->error = 0;
+		INIT_LIST_HEAD(&phy->port_phy_el);
+		for (k = 0; k < PORT_NUM_EVENTS; k++)
+			INIT_WORK(&phy->port_events[k], sas_port_event_fns[k],
+				  phy);
+
+		for (k = 0; k < PHY_NUM_EVENTS; k++)
+			INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k],
+				  phy);
+		phy->port = NULL;
+		phy->ha = sas_ha;
+		spin_lock_init(&phy->frame_rcvd_lock);
+		spin_lock_init(&phy->sas_prim_lock);
+		phy->frame_rcvd_size = 0;
+
+		phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
+					 i);
+		if (!phy->phy)
+			return -ENOMEM;
+
+		phy->phy->identify.initiator_port_protocols =
+			phy->iproto;
+		phy->phy->identify.target_port_protocols = phy->tproto;
+		phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
+		phy->phy->identify.phy_identifier = i;
+		phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+		phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+		phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+		sas_phy_add(phy->phy);
+	}
+
+	return 0;
+}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
new file mode 100644
index 0000000..253cdcf
--- /dev/null
+++ b/drivers/scsi/libsas/sas_port.c
@@ -0,0 +1,279 @@
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/**
+ * sas_form_port -- add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+	int i;
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *si =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	if (port) {
+		if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+			   SAS_ADDR_SIZE) == 0)
+			sas_deform_port(phy);
+		else {
+			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+				    __FUNCTION__, phy->id, phy->port->id,
+				    phy->port->num_phys);
+			return;
+		}
+	}
+
+	/* find a port */
+	spin_lock(&sas_ha->phy_port_lock);
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		port = sas_ha->sas_port[i];
+		spin_lock(&port->phy_list_lock);
+		if (*(u64 *) port->sas_addr &&
+		    memcmp(port->attached_sas_addr,
+			   phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
+		    port->num_phys > 0) {
+			/* wide port */
+			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+				    port->id);
+			break;
+		} else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
+			memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
+			break;
+		}
+		spin_unlock(&port->phy_list_lock);
+	}
+
+	if (i >= sas_ha->num_phys) {
+		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+		       __FUNCTION__);
+		spin_unlock(&sas_ha->phy_port_lock);
+		return;
+	}
+
+	/* add the phy to the port */
+	list_add_tail(&phy->port_phy_el, &port->phy_list);
+	phy->port = port;
+	port->num_phys++;
+	port->phy_mask |= (1U << phy->id);
+
+	if (!port->phy)
+		port->phy = phy->phy;
+
+	SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
+		    port->id, port->phy_mask);
+
+	if (*(u64 *)port->attached_sas_addr == 0) {
+		port->class = phy->class;
+		memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+		       SAS_ADDR_SIZE);
+		port->iproto = phy->iproto;
+		port->tproto = phy->tproto;
+		port->oob_mode = phy->oob_mode;
+		port->linkrate = phy->linkrate;
+	} else
+		port->linkrate = max(port->linkrate, phy->linkrate);
+	spin_unlock(&port->phy_list_lock);
+	spin_unlock(&sas_ha->phy_port_lock);
+
+	if (!port->port) {
+		port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+		BUG_ON(!port->port);
+		sas_port_add(port->port);
+	}
+	sas_port_add_phy(port->port, phy->phy);
+
+	if (port->port_dev)
+		port->port_dev->pathways = port->num_phys;
+
+	/* Tell the LLDD about this port formation. */
+	if (si->dft->lldd_port_formed)
+		si->dft->lldd_port_formed(phy);
+
+	sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+}
+
+/**
+ * sas_deform_port -- remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy)
+{
+	struct sas_ha_struct *sas_ha = phy->ha;
+	struct asd_sas_port *port = phy->port;
+	struct sas_internal *si =
+		to_sas_internal(sas_ha->core.shost->transportt);
+
+	if (!port)
+		return;		  /* done by a phy event */
+
+	if (port->port_dev)
+		port->port_dev->pathways--;
+
+	if (port->num_phys == 1) {
+		sas_unregister_domain_devices(port);
+		sas_port_delete(port->port);
+		port->port = NULL;
+	} else
+		sas_port_delete_phy(port->port, phy->phy);
+
+
+	if (si->dft->lldd_port_deformed)
+		si->dft->lldd_port_deformed(phy);
+
+	spin_lock(&sas_ha->phy_port_lock);
+	spin_lock(&port->phy_list_lock);
+
+	list_del_init(&phy->port_phy_el);
+	phy->port = NULL;
+	port->num_phys--;
+	port->phy_mask &= ~(1U << phy->id);
+
+	if (port->num_phys == 0) {
+		INIT_LIST_HEAD(&port->phy_list);
+		memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+		memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+		port->class = 0;
+		port->iproto = 0;
+		port->tproto = 0;
+		port->oob_mode = 0;
+		port->phy_mask = 0;
+	}
+	spin_unlock(&port->phy_list_lock);
+	spin_unlock(&sas_ha->phy_port_lock);
+
+	return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(void *data)
+{
+	unsigned long flags;
+	u32 prim;
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	spin_lock_irqsave(&phy->sas_prim_lock, flags);
+	prim = phy->sas_prim;
+	spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+	SAS_DPRINTK("broadcast received: %d\n", prim);
+	sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+void sas_porte_link_reset_err(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+void sas_porte_timer_event(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+void sas_porte_hard_reset(void *data)
+{
+	struct asd_sas_phy *phy = data;
+
+	sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock,
+			&phy->port_events_pending);
+
+	sas_deform_port(phy);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+			  struct sas_ha_struct *sas_ha, int i)
+{
+	port->id = i;
+	INIT_LIST_HEAD(&port->dev_list);
+	spin_lock_init(&port->phy_list_lock);
+	INIT_LIST_HEAD(&port->phy_list);
+	port->num_phys = 0;
+	port->phy_mask = 0;
+	port->ha = sas_ha;
+
+	spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	/* initialize the ports and discovery */
+	for (i = 0; i < sas_ha->num_phys; i++) {
+		struct asd_sas_port *port = sas_ha->sas_port[i];
+
+		sas_init_port(port, sas_ha, i);
+		sas_init_disc(&port->disc, port);
+	}
+	return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+	int i;
+
+	for (i = 0; i < sas_ha->num_phys; i++)
+		if (sas_ha->sas_phy[i]->port)
+			sas_deform_port(sas_ha->sas_phy[i]);
+
+}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
new file mode 100644
index 0000000..43e0e4e
--- /dev/null
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -0,0 +1,786 @@
+/*
+ * Serial Attached SCSI (SAS) class SCSI Host glue.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/scatterlist.h>
+
+/* ---------- SCSI Host glue ---------- */
+
+#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+	struct task_status_struct *ts = &task->task_status;
+	struct scsi_cmnd *sc = task->uldd_task;
+	unsigned ts_flags = task->task_state_flags;
+	int hs = 0, stat = 0;
+
+	if (unlikely(!sc)) {
+		SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+		list_del_init(&task->list);
+		sas_free_task(task);
+		return;
+	}
+
+	if (ts->resp == SAS_TASK_UNDELIVERED) {
+		/* transport error */
+		hs = DID_NO_CONNECT;
+	} else { /* ts->resp == SAS_TASK_COMPLETE */
+		/* task delivered, what happened afterwards? */
+		switch (ts->stat) {
+		case SAS_DEV_NO_RESPONSE:
+		case SAS_INTERRUPTED:
+		case SAS_PHY_DOWN:
+		case SAS_NAK_R_ERR:
+		case SAS_OPEN_TO:
+			hs = DID_NO_CONNECT;
+			break;
+		case SAS_DATA_UNDERRUN:
+			sc->resid = ts->residual;
+			if (sc->request_bufflen - sc->resid < sc->underflow)
+				hs = DID_ERROR;
+			break;
+		case SAS_DATA_OVERRUN:
+			hs = DID_ERROR;
+			break;
+		case SAS_QUEUE_FULL:
+			hs = DID_SOFT_ERROR; /* retry */
+			break;
+		case SAS_DEVICE_UNKNOWN:
+			hs = DID_BAD_TARGET;
+			break;
+		case SAS_SG_ERR:
+			hs = DID_PARITY;
+			break;
+		case SAS_OPEN_REJECT:
+			if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
+				hs = DID_SOFT_ERROR; /* retry */
+			else
+				hs = DID_ERROR;
+			break;
+		case SAS_PROTO_RESPONSE:
+			SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+				    "task; please report this\n",
+				    task->dev->port->ha->sas_ha_name);
+			break;
+		case SAS_ABORTED_TASK:
+			hs = DID_ABORT;
+			break;
+		case SAM_CHECK_COND:
+			memcpy(sc->sense_buffer, ts->buf,
+			       max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+			stat = SAM_CHECK_COND;
+			break;
+		default:
+			stat = ts->stat;
+			break;
+		}
+	}
+	ASSIGN_SAS_TASK(sc, NULL);
+	sc->result = (hs << 16) | stat;
+	list_del_init(&task->list);
+	sas_free_task(task);
+	/* This is very ugly but this is how SCSI Core works. */
+	if (ts_flags & SAS_TASK_STATE_ABORTED)
+		scsi_finish_command(sc);
+	else
+		sc->scsi_done(sc);
+}
+
+static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
+{
+	enum task_attribute ta = TASK_ATTR_SIMPLE;
+	if (cmd->request && blk_rq_tagged(cmd->request)) {
+		if (cmd->device->ordered_tags &&
+		    (cmd->request->flags & REQ_HARDBARRIER))
+			ta = TASK_ATTR_HOQ;
+	}
+	return ta;
+}
+
+static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
+					       struct domain_device *dev,
+					       unsigned long gfp_flags)
+{
+	struct sas_task *task = sas_alloc_task(gfp_flags);
+	struct scsi_lun lun;
+
+	if (!task)
+		return NULL;
+
+	*(u32 *)cmd->sense_buffer = 0;
+	task->uldd_task = cmd;
+	ASSIGN_SAS_TASK(cmd, task);
+
+	task->dev = dev;
+	task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
+
+	task->ssp_task.retry_count = 1;
+	int_to_scsilun(cmd->device->lun, &lun);
+	memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
+	task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd);
+	memcpy(task->ssp_task.cdb, cmd->cmnd, 16);
+
+	task->scatter = cmd->request_buffer;
+	task->num_scatter = cmd->use_sg;
+	task->total_xfer_len = cmd->request_bufflen;
+	task->data_dir = cmd->sc_data_direction;
+
+	task->task_done = sas_scsi_task_done;
+
+	return task;
+}
+
+static int sas_queue_up(struct sas_task *task)
+{
+	struct sas_ha_struct *sas_ha = task->dev->port->ha;
+	struct scsi_core *core = &sas_ha->core;
+	unsigned long flags;
+	LIST_HEAD(list);
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+		return -SAS_QUEUE_FULL;
+	}
+	list_add_tail(&task->list, &core->task_queue);
+	core->task_queue_size += 1;
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+	up(&core->queue_thread_sema);
+
+	return 0;
+}
+
+/**
+ * sas_queuecommand -- Enqueue a command for processing
+ * @parameters: See SCSI Core documentation
+ *
+ * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
+ * call us without holding an IRQ spinlock...
+ */
+int sas_queuecommand(struct scsi_cmnd *cmd,
+		     void (*scsi_done)(struct scsi_cmnd *))
+{
+	int res = 0;
+	struct domain_device *dev = cmd_to_domain_dev(cmd);
+	struct Scsi_Host *host = cmd->device->host;
+	struct sas_internal *i = to_sas_internal(host->transportt);
+
+	spin_unlock_irq(host->host_lock);
+
+	{
+		struct sas_ha_struct *sas_ha = dev->port->ha;
+		struct sas_task *task;
+
+		res = -ENOMEM;
+		task = sas_create_task(cmd, dev, GFP_ATOMIC);
+		if (!task)
+			goto out;
+
+		cmd->scsi_done = scsi_done;
+		/* Queue up, Direct Mode or Task Collector Mode. */
+		if (sas_ha->lldd_max_execute_num < 2)
+			res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+		else
+			res = sas_queue_up(task);
+
+		/* Examine */
+		if (res) {
+			SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+			ASSIGN_SAS_TASK(cmd, NULL);
+			sas_free_task(task);
+			if (res == -SAS_QUEUE_FULL) {
+				cmd->result = DID_SOFT_ERROR << 16; /* retry */
+				res = 0;
+				scsi_done(cmd);
+			}
+			goto out;
+		}
+	}
+out:
+	spin_lock_irq(host->host_lock);
+	return res;
+}
+
+static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		if (cmd == my_cmd)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
+				     struct domain_device *dev)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		struct domain_device *x = cmd_to_domain_dev(cmd);
+
+		if (x == dev)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+static void sas_scsi_clear_queue_port(struct list_head *error_q,
+				      struct asd_sas_port *port)
+{
+	struct scsi_cmnd *cmd, *n;
+
+	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+		struct domain_device *dev = cmd_to_domain_dev(cmd);
+		struct asd_sas_port *x = dev->port;
+
+		if (x == port)
+			list_del_init(&cmd->eh_entry);
+	}
+}
+
+enum task_disposition {
+	TASK_IS_DONE,
+	TASK_IS_ABORTED,
+	TASK_IS_AT_LU,
+	TASK_IS_NOT_AT_LU,
+};
+
+static enum task_disposition sas_scsi_find_task(struct sas_task *task)
+{
+	struct sas_ha_struct *ha = task->dev->port->ha;
+	unsigned long flags;
+	int i, res;
+	struct sas_internal *si =
+		to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+	if (ha->lldd_max_execute_num > 1) {
+		struct scsi_core *core = &ha->core;
+		struct sas_task *t, *n;
+
+		spin_lock_irqsave(&core->task_queue_lock, flags);
+		list_for_each_entry_safe(t, n, &core->task_queue, list) {
+			if (task == t) {
+				list_del_init(&t->list);
+				spin_unlock_irqrestore(&core->task_queue_lock,
+						       flags);
+				SAS_DPRINTK("%s: task 0x%p aborted from "
+					    "task_queue\n",
+					    __FUNCTION__, task);
+				return TASK_IS_ABORTED;
+			}
+		}
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+	}
+
+	for (i = 0; i < 5; i++) {
+		SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+		res = si->dft->lldd_abort_task(task);
+
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+				    task);
+			return TASK_IS_DONE;
+		}
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+		if (res == TMF_RESP_FUNC_COMPLETE) {
+			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+				    __FUNCTION__, task);
+			return TASK_IS_ABORTED;
+		} else if (si->dft->lldd_query_task) {
+			SAS_DPRINTK("%s: querying task 0x%p\n",
+				    __FUNCTION__, task);
+			res = si->dft->lldd_query_task(task);
+			if (res == TMF_RESP_FUNC_SUCC) {
+				SAS_DPRINTK("%s: task 0x%p at LU\n",
+					    __FUNCTION__, task);
+				return TASK_IS_AT_LU;
+			} else if (res == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("%s: task 0x%p not at LU\n",
+					    __FUNCTION__, task);
+				return TASK_IS_NOT_AT_LU;
+			}
+		}
+	}
+	return res;
+}
+
+static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
+{
+	int res = TMF_RESP_FUNC_FAILED;
+	struct scsi_lun lun;
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	int_to_scsilun(cmd->device->lun, &lun);
+
+	SAS_DPRINTK("eh: device %llx LUN %x has the task\n",
+		    SAS_ADDR(dev->sas_addr),
+		    cmd->device->lun);
+
+	if (i->dft->lldd_abort_task_set)
+		res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
+
+	if (res == TMF_RESP_FUNC_FAILED) {
+		if (i->dft->lldd_clear_task_set)
+			res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
+	}
+
+	if (res == TMF_RESP_FUNC_FAILED) {
+		if (i->dft->lldd_lu_reset)
+			res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+	}
+
+	return res;
+}
+
+static int sas_recover_I_T(struct domain_device *dev)
+{
+	int res = TMF_RESP_FUNC_FAILED;
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+
+	SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+		    SAS_ADDR(dev->sas_addr));
+
+	if (i->dft->lldd_I_T_nexus_reset)
+		res = i->dft->lldd_I_T_nexus_reset(dev);
+
+	return res;
+}
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+	unsigned long flags;
+	LIST_HEAD(error_q);
+	struct scsi_cmnd *cmd, *n;
+	enum task_disposition res = TASK_IS_DONE;
+	int tmf_resp;
+	struct sas_internal *i = to_sas_internal(shost->transportt);
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	list_splice_init(&shost->eh_cmd_q, &error_q);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+
+	/* All tasks on this list were marked SAS_TASK_STATE_ABORTED
+	 * by sas_scsi_timed_out() callback.
+	 */
+Again:
+	SAS_DPRINTK("going over list...\n");
+	list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+		struct sas_task *task = TO_SAS_TASK(cmd);
+
+		SAS_DPRINTK("trying to find task 0x%p\n", task);
+		list_del_init(&cmd->eh_entry);
+		res = sas_scsi_find_task(task);
+
+		cmd->eh_eflags = 0;
+		shost->host_failed--;
+
+		switch (res) {
+		case TASK_IS_DONE:
+			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+				    task);
+			task->task_done(task);
+			continue;
+		case TASK_IS_ABORTED:
+			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+				    __FUNCTION__, task);
+			task->task_done(task);
+			continue;
+		case TASK_IS_AT_LU:
+			SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+			tmf_resp = sas_recover_lu(task->dev, cmd);
+			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("dev %016llx LU %x is "
+					    "recovered\n",
+					    SAS_ADDR(task->dev),
+					    cmd->device->lun);
+				task->task_done(task);
+				sas_scsi_clear_queue_lu(&error_q, cmd);
+				goto Again;
+			}
+			/* fallthrough */
+		case TASK_IS_NOT_AT_LU:
+			SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+				    task);
+			tmf_resp = sas_recover_I_T(task->dev);
+			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+				SAS_DPRINTK("I_T %016llx recovered\n",
+					    SAS_ADDR(task->dev->sas_addr));
+				task->task_done(task);
+				sas_scsi_clear_queue_I_T(&error_q, task->dev);
+				goto Again;
+			}
+			/* Hammer time :-) */
+			if (i->dft->lldd_clear_nexus_port) {
+				struct asd_sas_port *port = task->dev->port;
+				SAS_DPRINTK("clearing nexus for port:%d\n",
+					    port->id);
+				res = i->dft->lldd_clear_nexus_port(port);
+				if (res == TMF_RESP_FUNC_COMPLETE) {
+					SAS_DPRINTK("clear nexus port:%d "
+						    "succeeded\n", port->id);
+					task->task_done(task);
+					sas_scsi_clear_queue_port(&error_q,
+								  port);
+					goto Again;
+				}
+			}
+			if (i->dft->lldd_clear_nexus_ha) {
+				SAS_DPRINTK("clear nexus ha\n");
+				res = i->dft->lldd_clear_nexus_ha(ha);
+				if (res == TMF_RESP_FUNC_COMPLETE) {
+					SAS_DPRINTK("clear nexus ha "
+						    "succeeded\n");
+					task->task_done(task);
+					goto out;
+				}
+			}
+			/* If we are here -- this means that no amount
+			 * of effort could recover from errors.  Quite
+			 * possibly the HA just disappeared.
+			 */
+			SAS_DPRINTK("error from  device %llx, LUN %x "
+				    "couldn't be recovered in any way\n",
+				    SAS_ADDR(task->dev->sas_addr),
+				    cmd->device->lun);
+
+			task->task_done(task);
+			goto clear_q;
+		}
+	}
+out:
+	SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+	return;
+clear_q:
+	SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+	list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+		struct sas_task *task = TO_SAS_TASK(cmd);
+		list_del_init(&cmd->eh_entry);
+		task->task_done(task);
+	}
+}
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+	struct sas_task *task = TO_SAS_TASK(cmd);
+	unsigned long flags;
+
+	if (!task) {
+		SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+			    cmd, task);
+		return EH_HANDLED;
+	}
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+		SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+			    cmd, task);
+		return EH_HANDLED;
+	}
+	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n",
+		    cmd, task);
+
+	return EH_NOT_HANDLED;
+}
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+	struct domain_device *found_dev = NULL;
+	int i;
+
+	spin_lock(&ha->phy_port_lock);
+	for (i = 0; i < ha->num_phys; i++) {
+		struct asd_sas_port *port = ha->sas_port[i];
+		struct domain_device *dev;
+
+		spin_lock(&port->dev_list_lock);
+		list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+			if (rphy == dev->rphy) {
+				found_dev = dev;
+				spin_unlock(&port->dev_list_lock);
+				goto found;
+			}
+		}
+		spin_unlock(&port->dev_list_lock);
+	}
+ found:
+	spin_unlock(&ha->phy_port_lock);
+
+	return found_dev;
+}
+
+static inline struct domain_device *sas_find_target(struct scsi_target *starget)
+{
+	struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
+
+	return sas_find_dev_by_rphy(rphy);
+}
+
+int sas_target_alloc(struct scsi_target *starget)
+{
+	struct domain_device *found_dev = sas_find_target(starget);
+
+	if (!found_dev)
+		return -ENODEV;
+
+	starget->hostdata = found_dev;
+	return 0;
+}
+
+#define SAS_DEF_QD 32
+#define SAS_MAX_QD 64
+
+int sas_slave_configure(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+	struct sas_ha_struct *sas_ha;
+
+	BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
+
+	sas_ha = dev->port->ha;
+
+	sas_read_port_mode_page(scsi_dev);
+
+	if (scsi_dev->tagged_supported) {
+		scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG);
+		scsi_activate_tcq(scsi_dev, SAS_DEF_QD);
+	} else {
+		SAS_DPRINTK("device %llx, LUN %x doesn't support "
+			    "TCQ\n", SAS_ADDR(dev->sas_addr),
+			    scsi_dev->lun);
+		scsi_dev->tagged_supported = 0;
+		scsi_set_tag_type(scsi_dev, 0);
+		scsi_deactivate_tcq(scsi_dev, 1);
+	}
+
+	return 0;
+}
+
+void sas_slave_destroy(struct scsi_device *scsi_dev)
+{
+}
+
+int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
+{
+	int res = min(new_depth, SAS_MAX_QD);
+
+	if (scsi_dev->tagged_supported)
+		scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
+					res);
+	else {
+		struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+		sas_printk("device %llx LUN %x queue depth changed to 1\n",
+			   SAS_ADDR(dev->sas_addr),
+			   scsi_dev->lun);
+		scsi_adjust_queue_depth(scsi_dev, 0, 1);
+		res = 1;
+	}
+
+	return res;
+}
+
+int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
+{
+	if (!scsi_dev->tagged_supported)
+		return 0;
+
+	scsi_deactivate_tcq(scsi_dev, 1);
+
+	scsi_set_tag_type(scsi_dev, qt);
+	scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
+
+	return qt;
+}
+
+int sas_bios_param(struct scsi_device *scsi_dev,
+			  struct block_device *bdev,
+			  sector_t capacity, int *hsc)
+{
+	hsc[0] = 255;
+	hsc[1] = 63;
+	sector_div(capacity, 255*63);
+	hsc[2] = capacity;
+
+	return 0;
+}
+
+/* ---------- Task Collector Thread implementation ---------- */
+
+static void sas_queue(struct sas_ha_struct *sas_ha)
+{
+	struct scsi_core *core = &sas_ha->core;
+	unsigned long flags;
+	LIST_HEAD(q);
+	int can_queue;
+	int res;
+	struct sas_internal *i = to_sas_internal(core->shost->transportt);
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	while (!core->queue_thread_kill &&
+	       !list_empty(&core->task_queue)) {
+
+		can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
+		if (can_queue >= 0) {
+			can_queue = core->task_queue_size;
+			list_splice_init(&core->task_queue, &q);
+		} else {
+			struct list_head *a, *n;
+
+			can_queue = sas_ha->lldd_queue_size;
+			list_for_each_safe(a, n, &core->task_queue) {
+				list_move_tail(a, &q);
+				if (--can_queue == 0)
+					break;
+			}
+			can_queue = sas_ha->lldd_queue_size;
+		}
+		core->task_queue_size -= can_queue;
+		spin_unlock_irqrestore(&core->task_queue_lock, flags);
+		{
+			struct sas_task *task = list_entry(q.next,
+							   struct sas_task,
+							   list);
+			list_del_init(&q);
+			res = i->dft->lldd_execute_task(task, can_queue,
+							GFP_KERNEL);
+			if (unlikely(res))
+				__list_add(&q, task->list.prev, &task->list);
+		}
+		spin_lock_irqsave(&core->task_queue_lock, flags);
+		if (res) {
+			list_splice_init(&q, &core->task_queue); /*at head*/
+			core->task_queue_size += can_queue;
+		}
+	}
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+static DECLARE_COMPLETION(queue_th_comp);
+
+/**
+ * sas_queue_thread -- The Task Collector thread
+ * @_sas_ha: pointer to struct sas_ha
+ */
+static int sas_queue_thread(void *_sas_ha)
+{
+	struct sas_ha_struct *sas_ha = _sas_ha;
+	struct scsi_core *core = &sas_ha->core;
+
+	daemonize("sas_queue_%d", core->shost->host_no);
+	current->flags |= PF_NOFREEZE;
+
+	complete(&queue_th_comp);
+
+	while (1) {
+		down_interruptible(&core->queue_thread_sema);
+		sas_queue(sas_ha);
+		if (core->queue_thread_kill)
+			break;
+	}
+
+	complete(&queue_th_comp);
+
+	return 0;
+}
+
+int sas_init_queue(struct sas_ha_struct *sas_ha)
+{
+	int res;
+	struct scsi_core *core = &sas_ha->core;
+
+	spin_lock_init(&core->task_queue_lock);
+	core->task_queue_size = 0;
+	INIT_LIST_HEAD(&core->task_queue);
+	init_MUTEX_LOCKED(&core->queue_thread_sema);
+
+	res = kernel_thread(sas_queue_thread, sas_ha, 0);
+	if (res >= 0)
+		wait_for_completion(&queue_th_comp);
+
+	return res < 0 ? res : 0;
+}
+
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
+{
+	unsigned long flags;
+	struct scsi_core *core = &sas_ha->core;
+	struct sas_task *task, *n;
+
+	init_completion(&queue_th_comp);
+	core->queue_thread_kill = 1;
+	up(&core->queue_thread_sema);
+	wait_for_completion(&queue_th_comp);
+
+	if (!list_empty(&core->task_queue))
+		SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
+			    SAS_ADDR(sas_ha->sas_addr));
+
+	spin_lock_irqsave(&core->task_queue_lock, flags);
+	list_for_each_entry_safe(task, n, &core->task_queue, list) {
+		struct scsi_cmnd *cmd = task->uldd_task;
+
+		list_del_init(&task->list);
+
+		ASSIGN_SAS_TASK(cmd, NULL);
+		sas_free_task(task);
+		cmd->result = DID_ABORT << 16;
+		cmd->scsi_done(cmd);
+	}
+	spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(sas_queuecommand);
+EXPORT_SYMBOL_GPL(sas_target_alloc);
+EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_slave_destroy);
+EXPORT_SYMBOL_GPL(sas_change_queue_depth);
+EXPORT_SYMBOL_GPL(sas_change_queue_type);
+EXPORT_SYMBOL_GPL(sas_bios_param);