[PATCH] libata: reimplement controller-wide PM

Reimplement controller-wide PM.  ata_host_set_suspend/resume() are
defined to suspend and resume a host_set.  While suspended, EHs for
all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and
frozen.

Because SCSI device hotplug is done asynchronously against the rest of
libata EH and the same mutex is used when adding new device, suspend
cannot wait for hotplug to complete.  So, if SCSI device hotplug is in
progress, suspend fails with -EBUSY.

In most cases, host_set resume is followed by device resume.  As each
resume operation requires a reset, a single host_set-wide resume
operation may result in multiple resets.  To avoid this, resume waits
upto 1 second giving PM to request resume for devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 160 insertions, 5 deletions

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 51dbc52..fa65b99 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5009,6 +5009,122 @@ int ata_flush_cache(struct ata_device *dev)
 	return 0;
 }
 
+static int ata_host_set_request_pm(struct ata_host_set *host_set,
+				   pm_message_t mesg, unsigned int action,
+				   unsigned int ehi_flags, int wait)
+{
+	unsigned long flags;
+	int i, rc;
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+
+		/* Previous resume operation might still be in
+		 * progress.  Wait for PM_PENDING to clear.
+		 */
+		if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+			ata_port_wait_eh(ap);
+			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+		}
+
+		/* request PM ops to EH */
+		spin_lock_irqsave(ap->lock, flags);
+
+		ap->pm_mesg = mesg;
+		if (wait) {
+			rc = 0;
+			ap->pm_result = &rc;
+		}
+
+		ap->pflags |= ATA_PFLAG_PM_PENDING;
+		ap->eh_info.action |= action;
+		ap->eh_info.flags |= ehi_flags;
+
+		ata_port_schedule_eh(ap);
+
+		spin_unlock_irqrestore(ap->lock, flags);
+
+		/* wait and check result */
+		if (wait) {
+			ata_port_wait_eh(ap);
+			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+			if (rc)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	ata_host_set_suspend - suspend host_set
+ *	@host_set: host_set to suspend
+ *	@mesg: PM message
+ *
+ *	Suspend @host_set.  Actual operation is performed by EH.  This
+ *	function requests EH to perform PM operations and waits for EH
+ *	to finish.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg)
+{
+	int i, j, rc;
+
+	rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1);
+	if (rc)
+		goto fail;
+
+	/* EH is quiescent now.  Fail if we have any ready device.
+	 * This happens if hotplug occurs between completion of device
+	 * suspension and here.
+	 */
+	for (i = 0; i < host_set->n_ports; i++) {
+		struct ata_port *ap = host_set->ports[i];
+
+		for (j = 0; j < ATA_MAX_DEVICES; j++) {
+			struct ata_device *dev = &ap->device[j];
+
+			if (ata_dev_ready(dev)) {
+				ata_port_printk(ap, KERN_WARNING,
+						"suspend failed, device %d "
+						"still active\n", dev->devno);
+				rc = -EBUSY;
+				goto fail;
+			}
+		}
+	}
+
+	host_set->dev->power.power_state = mesg;
+	return 0;
+
+ fail:
+	ata_host_set_resume(host_set);
+	return rc;
+}
+
+/**
+ *	ata_host_set_resume - resume host_set
+ *	@host_set: host_set to resume
+ *
+ *	Resume @host_set.  Actual operation is performed by EH.  This
+ *	function requests EH to perform PM operations and returns.
+ *	Note that all resume operations are performed parallely.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_host_set_resume(struct ata_host_set *host_set)
+{
+	ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET,
+				ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+	host_set->dev->power.power_state = PMSG_ON;
+}
+
 /**
  *	ata_port_start - Set port up for dma.
  *	@ap: Port to initialize
@@ -5651,20 +5767,55 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 	return (tmp == bits->val) ? 1 : 0;
 }
 
-int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-	return 0;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		pci_disable_device(pdev);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 
-int ata_pci_device_resume(struct pci_dev *pdev)
+void ata_pci_device_do_resume(struct pci_dev *pdev)
 {
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	pci_enable_device(pdev);
 	pci_set_master(pdev);
+}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+	int rc = 0;
+
+	rc = ata_host_set_suspend(host_set, state);
+	if (rc)
+		return rc;
+
+	if (host_set->next) {
+		rc = ata_host_set_suspend(host_set->next, state);
+		if (rc) {
+			ata_host_set_resume(host_set);
+			return rc;
+		}
+	}
+
+	ata_pci_device_do_suspend(pdev, state);
+
+	return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+	ata_pci_device_do_resume(pdev);
+	ata_host_set_resume(host_set);
+	if (host_set->next)
+		ata_host_set_resume(host_set->next);
+
 	return 0;
 }
 #endif /* CONFIG_PCI */
@@ -5844,6 +5995,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write);
 EXPORT_SYMBOL_GPL(sata_scr_write_flush);
 EXPORT_SYMBOL_GPL(ata_port_online);
 EXPORT_SYMBOL_GPL(ata_port_offline);
+EXPORT_SYMBOL_GPL(ata_host_set_suspend);
+EXPORT_SYMBOL_GPL(ata_host_set_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
@@ -5858,6 +6011,8 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 EXPORT_SYMBOL_GPL(ata_pci_default_filter);