summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/esp.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/esp.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/esp.c')
-rw-r--r--drivers/scsi/esp.c4402
1 files changed, 4402 insertions, 0 deletions
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
new file mode 100644
index 0000000..d8ab73b
--- /dev/null
+++ b/drivers/scsi/esp.c
@@ -0,0 +1,4402 @@
+/* $Id: esp.c,v 1.101 2002/01/15 06:48:55 davem Exp $
+ * esp.c: EnhancedScsiProcessor Sun SCSI driver code.
+ *
+ * Copyright (C) 1995, 1998 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* TODO:
+ *
+ * 1) Maybe disable parity checking in config register one for SCSI1
+ * targets. (Gilmore says parity error on the SBus can lock up
+ * old sun4c's)
+ * 2) Add support for DMA2 pipelining.
+ * 3) Add tagged queueing.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include "esp.h"
+
+#include <asm/sbus.h>
+#include <asm/dma.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/oplib.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#ifndef __sparc_v9__
+#include <asm/machines.h>
+#include <asm/idprom.h>
+#endif
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#define DEBUG_ESP
+/* #define DEBUG_ESP_HME */
+/* #define DEBUG_ESP_DATA */
+/* #define DEBUG_ESP_QUEUE */
+/* #define DEBUG_ESP_DISCONNECT */
+/* #define DEBUG_ESP_STATUS */
+/* #define DEBUG_ESP_PHASES */
+/* #define DEBUG_ESP_WORKBUS */
+/* #define DEBUG_STATE_MACHINE */
+/* #define DEBUG_ESP_CMDS */
+/* #define DEBUG_ESP_IRQS */
+/* #define DEBUG_SDTR */
+/* #define DEBUG_ESP_SG */
+
+/* Use the following to sprinkle debugging messages in a way which
+ * suits you if combinations of the above become too verbose when
+ * trying to track down a specific problem.
+ */
+/* #define DEBUG_ESP_MISC */
+
+#if defined(DEBUG_ESP)
+#define ESPLOG(foo) printk foo
+#else
+#define ESPLOG(foo)
+#endif /* (DEBUG_ESP) */
+
+#if defined(DEBUG_ESP_HME)
+#define ESPHME(foo) printk foo
+#else
+#define ESPHME(foo)
+#endif
+
+#if defined(DEBUG_ESP_DATA)
+#define ESPDATA(foo) printk foo
+#else
+#define ESPDATA(foo)
+#endif
+
+#if defined(DEBUG_ESP_QUEUE)
+#define ESPQUEUE(foo) printk foo
+#else
+#define ESPQUEUE(foo)
+#endif
+
+#if defined(DEBUG_ESP_DISCONNECT)
+#define ESPDISC(foo) printk foo
+#else
+#define ESPDISC(foo)
+#endif
+
+#if defined(DEBUG_ESP_STATUS)
+#define ESPSTAT(foo) printk foo
+#else
+#define ESPSTAT(foo)
+#endif
+
+#if defined(DEBUG_ESP_PHASES)
+#define ESPPHASE(foo) printk foo
+#else
+#define ESPPHASE(foo)
+#endif
+
+#if defined(DEBUG_ESP_WORKBUS)
+#define ESPBUS(foo) printk foo
+#else
+#define ESPBUS(foo)
+#endif
+
+#if defined(DEBUG_ESP_IRQS)
+#define ESPIRQ(foo) printk foo
+#else
+#define ESPIRQ(foo)
+#endif
+
+#if defined(DEBUG_SDTR)
+#define ESPSDTR(foo) printk foo
+#else
+#define ESPSDTR(foo)
+#endif
+
+#if defined(DEBUG_ESP_MISC)
+#define ESPMISC(foo) printk foo
+#else
+#define ESPMISC(foo)
+#endif
+
+/* Command phase enumeration. */
+enum {
+ not_issued = 0x00, /* Still in the issue_SC queue. */
+
+ /* Various forms of selecting a target. */
+#define in_slct_mask 0x10
+ in_slct_norm = 0x10, /* ESP is arbitrating, normal selection */
+ in_slct_stop = 0x11, /* ESP will select, then stop with IRQ */
+ in_slct_msg = 0x12, /* select, then send a message */
+ in_slct_tag = 0x13, /* select and send tagged queue msg */
+ in_slct_sneg = 0x14, /* select and acquire sync capabilities */
+
+ /* Any post selection activity. */
+#define in_phases_mask 0x20
+ in_datain = 0x20, /* Data is transferring from the bus */
+ in_dataout = 0x21, /* Data is transferring to the bus */
+ in_data_done = 0x22, /* Last DMA data operation done (maybe) */
+ in_msgin = 0x23, /* Eating message from target */
+ in_msgincont = 0x24, /* Eating more msg bytes from target */
+ in_msgindone = 0x25, /* Decide what to do with what we got */
+ in_msgout = 0x26, /* Sending message to target */
+ in_msgoutdone = 0x27, /* Done sending msg out */
+ in_cmdbegin = 0x28, /* Sending cmd after abnormal selection */
+ in_cmdend = 0x29, /* Done sending slow cmd */
+ in_status = 0x2a, /* Was in status phase, finishing cmd */
+ in_freeing = 0x2b, /* freeing the bus for cmd cmplt or disc */
+ in_the_dark = 0x2c, /* Don't know what bus phase we are in */
+
+ /* Special states, ie. not normal bus transitions... */
+#define in_spec_mask 0x80
+ in_abortone = 0x80, /* Aborting one command currently */
+ in_abortall = 0x81, /* Blowing away all commands we have */
+ in_resetdev = 0x82, /* SCSI target reset in progress */
+ in_resetbus = 0x83, /* SCSI bus reset in progress */
+ in_tgterror = 0x84, /* Target did something stupid */
+};
+
+enum {
+ /* Zero has special meaning, see skipahead[12]. */
+/*0*/ do_never,
+
+/*1*/ do_phase_determine,
+/*2*/ do_reset_bus,
+/*3*/ do_reset_complete,
+/*4*/ do_work_bus,
+/*5*/ do_intr_end
+};
+
+/* The master ring of all esp hosts we are managing in this driver. */
+static struct esp *espchain;
+static DEFINE_SPINLOCK(espchain_lock);
+static int esps_running = 0;
+
+/* Forward declarations. */
+static irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs);
+
+/* Debugging routines */
+struct esp_cmdstrings {
+ u8 cmdchar;
+ char *text;
+} esp_cmd_strings[] = {
+ /* Miscellaneous */
+ { ESP_CMD_NULL, "ESP_NOP", },
+ { ESP_CMD_FLUSH, "FIFO_FLUSH", },
+ { ESP_CMD_RC, "RSTESP", },
+ { ESP_CMD_RS, "RSTSCSI", },
+ /* Disconnected State Group */
+ { ESP_CMD_RSEL, "RESLCTSEQ", },
+ { ESP_CMD_SEL, "SLCTNATN", },
+ { ESP_CMD_SELA, "SLCTATN", },
+ { ESP_CMD_SELAS, "SLCTATNSTOP", },
+ { ESP_CMD_ESEL, "ENSLCTRESEL", },
+ { ESP_CMD_DSEL, "DISSELRESEL", },
+ { ESP_CMD_SA3, "SLCTATN3", },
+ { ESP_CMD_RSEL3, "RESLCTSEQ", },
+ /* Target State Group */
+ { ESP_CMD_SMSG, "SNDMSG", },
+ { ESP_CMD_SSTAT, "SNDSTATUS", },
+ { ESP_CMD_SDATA, "SNDDATA", },
+ { ESP_CMD_DSEQ, "DISCSEQ", },
+ { ESP_CMD_TSEQ, "TERMSEQ", },
+ { ESP_CMD_TCCSEQ, "TRGTCMDCOMPSEQ", },
+ { ESP_CMD_DCNCT, "DISC", },
+ { ESP_CMD_RMSG, "RCVMSG", },
+ { ESP_CMD_RCMD, "RCVCMD", },
+ { ESP_CMD_RDATA, "RCVDATA", },
+ { ESP_CMD_RCSEQ, "RCVCMDSEQ", },
+ /* Initiator State Group */
+ { ESP_CMD_TI, "TRANSINFO", },
+ { ESP_CMD_ICCSEQ, "INICMDSEQCOMP", },
+ { ESP_CMD_MOK, "MSGACCEPTED", },
+ { ESP_CMD_TPAD, "TPAD", },
+ { ESP_CMD_SATN, "SATN", },
+ { ESP_CMD_RATN, "RATN", },
+};
+#define NUM_ESP_COMMANDS ((sizeof(esp_cmd_strings)) / (sizeof(struct esp_cmdstrings)))
+
+/* Print textual representation of an ESP command */
+static inline void esp_print_cmd(u8 espcmd)
+{
+ u8 dma_bit = espcmd & ESP_CMD_DMA;
+ int i;
+
+ espcmd &= ~dma_bit;
+ for (i = 0; i < NUM_ESP_COMMANDS; i++)
+ if (esp_cmd_strings[i].cmdchar == espcmd)
+ break;
+ if (i == NUM_ESP_COMMANDS)
+ printk("ESP_Unknown");
+ else
+ printk("%s%s", esp_cmd_strings[i].text,
+ ((dma_bit) ? "+DMA" : ""));
+}
+
+/* Print the status register's value */
+static inline void esp_print_statreg(u8 statreg)
+{
+ u8 phase;
+
+ printk("STATUS<");
+ phase = statreg & ESP_STAT_PMASK;
+ printk("%s,", (phase == ESP_DOP ? "DATA-OUT" :
+ (phase == ESP_DIP ? "DATA-IN" :
+ (phase == ESP_CMDP ? "COMMAND" :
+ (phase == ESP_STATP ? "STATUS" :
+ (phase == ESP_MOP ? "MSG-OUT" :
+ (phase == ESP_MIP ? "MSG_IN" :
+ "unknown")))))));
+ if (statreg & ESP_STAT_TDONE)
+ printk("TRANS_DONE,");
+ if (statreg & ESP_STAT_TCNT)
+ printk("TCOUNT_ZERO,");
+ if (statreg & ESP_STAT_PERR)
+ printk("P_ERROR,");
+ if (statreg & ESP_STAT_SPAM)
+ printk("SPAM,");
+ if (statreg & ESP_STAT_INTR)
+ printk("IRQ,");
+ printk(">");
+}
+
+/* Print the interrupt register's value */
+static inline void esp_print_ireg(u8 intreg)
+{
+ printk("INTREG< ");
+ if (intreg & ESP_INTR_S)
+ printk("SLCT_NATN ");
+ if (intreg & ESP_INTR_SATN)
+ printk("SLCT_ATN ");
+ if (intreg & ESP_INTR_RSEL)
+ printk("RSLCT ");
+ if (intreg & ESP_INTR_FDONE)
+ printk("FDONE ");
+ if (intreg & ESP_INTR_BSERV)
+ printk("BSERV ");
+ if (intreg & ESP_INTR_DC)
+ printk("DISCNCT ");
+ if (intreg & ESP_INTR_IC)
+ printk("ILL_CMD ");
+ if (intreg & ESP_INTR_SR)
+ printk("SCSI_BUS_RESET ");
+ printk(">");
+}
+
+/* Print the sequence step registers contents */
+static inline void esp_print_seqreg(u8 stepreg)
+{
+ stepreg &= ESP_STEP_VBITS;
+ printk("STEP<%s>",
+ (stepreg == ESP_STEP_ASEL ? "SLCT_ARB_CMPLT" :
+ (stepreg == ESP_STEP_SID ? "1BYTE_MSG_SENT" :
+ (stepreg == ESP_STEP_NCMD ? "NOT_IN_CMD_PHASE" :
+ (stepreg == ESP_STEP_PPC ? "CMD_BYTES_LOST" :
+ (stepreg == ESP_STEP_FINI4 ? "CMD_SENT_OK" :
+ "UNKNOWN"))))));
+}
+
+static char *phase_string(int phase)
+{
+ switch (phase) {
+ case not_issued:
+ return "UNISSUED";
+ case in_slct_norm:
+ return "SLCTNORM";
+ case in_slct_stop:
+ return "SLCTSTOP";
+ case in_slct_msg:
+ return "SLCTMSG";
+ case in_slct_tag:
+ return "SLCTTAG";
+ case in_slct_sneg:
+ return "SLCTSNEG";
+ case in_datain:
+ return "DATAIN";
+ case in_dataout:
+ return "DATAOUT";
+ case in_data_done:
+ return "DATADONE";
+ case in_msgin:
+ return "MSGIN";
+ case in_msgincont:
+ return "MSGINCONT";
+ case in_msgindone:
+ return "MSGINDONE";
+ case in_msgout:
+ return "MSGOUT";
+ case in_msgoutdone:
+ return "MSGOUTDONE";
+ case in_cmdbegin:
+ return "CMDBEGIN";
+ case in_cmdend:
+ return "CMDEND";
+ case in_status:
+ return "STATUS";
+ case in_freeing:
+ return "FREEING";
+ case in_the_dark:
+ return "CLUELESS";
+ case in_abortone:
+ return "ABORTONE";
+ case in_abortall:
+ return "ABORTALL";
+ case in_resetdev:
+ return "RESETDEV";
+ case in_resetbus:
+ return "RESETBUS";
+ case in_tgterror:
+ return "TGTERROR";
+ default:
+ return "UNKNOWN";
+ };
+}
+
+#ifdef DEBUG_STATE_MACHINE
+static inline void esp_advance_phase(struct scsi_cmnd *s, int newphase)
+{
+ ESPLOG(("<%s>", phase_string(newphase)));
+ s->SCp.sent_command = s->SCp.phase;
+ s->SCp.phase = newphase;
+}
+#else
+#define esp_advance_phase(__s, __newphase) \
+ (__s)->SCp.sent_command = (__s)->SCp.phase; \
+ (__s)->SCp.phase = (__newphase);
+#endif
+
+#ifdef DEBUG_ESP_CMDS
+static inline void esp_cmd(struct esp *esp, u8 cmd)
+{
+ esp->espcmdlog[esp->espcmdent] = cmd;
+ esp->espcmdent = (esp->espcmdent + 1) & 31;
+ sbus_writeb(cmd, esp->eregs + ESP_CMD);
+}
+#else
+#define esp_cmd(__esp, __cmd) \
+ sbus_writeb((__cmd), ((__esp)->eregs) + ESP_CMD)
+#endif
+
+#define ESP_INTSOFF(__dregs) \
+ sbus_writel(sbus_readl((__dregs)+DMA_CSR)&~(DMA_INT_ENAB), (__dregs)+DMA_CSR)
+#define ESP_INTSON(__dregs) \
+ sbus_writel(sbus_readl((__dregs)+DMA_CSR)|DMA_INT_ENAB, (__dregs)+DMA_CSR)
+#define ESP_IRQ_P(__dregs) \
+ (sbus_readl((__dregs)+DMA_CSR) & (DMA_HNDL_INTR|DMA_HNDL_ERROR))
+
+/* How we use the various Linux SCSI data structures for operation.
+ *
+ * struct scsi_cmnd:
+ *
+ * We keep track of the synchronous capabilities of a target
+ * in the device member, using sync_min_period and
+ * sync_max_offset. These are the values we directly write
+ * into the ESP registers while running a command. If offset
+ * is zero the ESP will use asynchronous transfers.
+ * If the borken flag is set we assume we shouldn't even bother
+ * trying to negotiate for synchronous transfer as this target
+ * is really stupid. If we notice the target is dropping the
+ * bus, and we have been allowing it to disconnect, we clear
+ * the disconnect flag.
+ */
+
+
+/* Manipulation of the ESP command queues. Thanks to the aha152x driver
+ * and its author, Juergen E. Fischer, for the methods used here.
+ * Note that these are per-ESP queues, not global queues like
+ * the aha152x driver uses.
+ */
+static inline void append_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC)
+{
+ struct scsi_cmnd *end;
+
+ new_SC->host_scribble = (unsigned char *) NULL;
+ if (!*SC)
+ *SC = new_SC;
+ else {
+ for (end=*SC;end->host_scribble;end=(struct scsi_cmnd *)end->host_scribble)
+ ;
+ end->host_scribble = (unsigned char *) new_SC;
+ }
+}
+
+static inline void prepend_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC)
+{
+ new_SC->host_scribble = (unsigned char *) *SC;
+ *SC = new_SC;
+}
+
+static inline struct scsi_cmnd *remove_first_SC(struct scsi_cmnd **SC)
+{
+ struct scsi_cmnd *ptr;
+ ptr = *SC;
+ if (ptr)
+ *SC = (struct scsi_cmnd *) (*SC)->host_scribble;
+ return ptr;
+}
+
+static inline struct scsi_cmnd *remove_SC(struct scsi_cmnd **SC, int target, int lun)
+{
+ struct scsi_cmnd *ptr, *prev;
+
+ for (ptr = *SC, prev = NULL;
+ ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
+ prev = ptr, ptr = (struct scsi_cmnd *) ptr->host_scribble)
+ ;
+ if (ptr) {
+ if (prev)
+ prev->host_scribble=ptr->host_scribble;
+ else
+ *SC=(struct scsi_cmnd *)ptr->host_scribble;
+ }
+ return ptr;
+}
+
+/* Resetting various pieces of the ESP scsi driver chipset/buses. */
+static void esp_reset_dma(struct esp *esp)
+{
+ int can_do_burst16, can_do_burst32, can_do_burst64;
+ int can_do_sbus64;
+ u32 tmp;
+
+ can_do_burst16 = (esp->bursts & DMA_BURST16) != 0;
+ can_do_burst32 = (esp->bursts & DMA_BURST32) != 0;
+ can_do_burst64 = 0;
+ can_do_sbus64 = 0;
+ if (sbus_can_dma_64bit(esp->sdev))
+ can_do_sbus64 = 1;
+ if (sbus_can_burst64(esp->sdev))
+ can_do_burst64 = (esp->bursts & DMA_BURST64) != 0;
+
+ /* Punt the DVMA into a known state. */
+ if (esp->dma->revision != dvmahme) {
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ sbus_writel(tmp | DMA_RST_SCSI, esp->dregs + DMA_CSR);
+ sbus_writel(tmp & ~DMA_RST_SCSI, esp->dregs + DMA_CSR);
+ }
+ switch (esp->dma->revision) {
+ case dvmahme:
+ /* This is the HME DVMA gate array. */
+
+ sbus_writel(DMA_RESET_FAS366, esp->dregs + DMA_CSR);
+ sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR);
+
+ esp->prev_hme_dmacsr = (DMA_PARITY_OFF|DMA_2CLKS|DMA_SCSI_DISAB|DMA_INT_ENAB);
+ esp->prev_hme_dmacsr &= ~(DMA_ENABLE|DMA_ST_WRITE|DMA_BRST_SZ);
+
+ if (can_do_burst64)
+ esp->prev_hme_dmacsr |= DMA_BRST64;
+ else if (can_do_burst32)
+ esp->prev_hme_dmacsr |= DMA_BRST32;
+
+ if (can_do_sbus64) {
+ esp->prev_hme_dmacsr |= DMA_SCSI_SBUS64;
+ sbus_set_sbus64(esp->sdev, esp->bursts);
+ }
+
+ /* This chip is horrible. */
+ while (sbus_readl(esp->dregs + DMA_CSR) & DMA_PEND_READ)
+ udelay(1);
+
+ sbus_writel(0, esp->dregs + DMA_CSR);
+ sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
+
+ /* This is necessary to avoid having the SCSI channel
+ * engine lock up on us.
+ */
+ sbus_writel(0, esp->dregs + DMA_ADDR);
+
+ break;
+ case dvmarev2:
+ /* This is the gate array found in the sun4m
+ * NCR SBUS I/O subsystem.
+ */
+ if (esp->erev != esp100) {
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ sbus_writel(tmp | DMA_3CLKS, esp->dregs + DMA_CSR);
+ }
+ break;
+ case dvmarev3:
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ tmp &= ~DMA_3CLKS;
+ tmp |= DMA_2CLKS;
+ if (can_do_burst32) {
+ tmp &= ~DMA_BRST_SZ;
+ tmp |= DMA_BRST32;
+ }
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ break;
+ case dvmaesc1:
+ /* This is the DMA unit found on SCSI/Ether cards. */
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ tmp |= DMA_ADD_ENABLE;
+ tmp &= ~DMA_BCNT_ENAB;
+ if (!can_do_burst32 && can_do_burst16) {
+ tmp |= DMA_ESC_BURST;
+ } else {
+ tmp &= ~(DMA_ESC_BURST);
+ }
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ break;
+ default:
+ break;
+ };
+ ESP_INTSON(esp->dregs);
+}
+
+/* Reset the ESP chip, _not_ the SCSI bus. */
+static void __init esp_reset_esp(struct esp *esp)
+{
+ u8 family_code, version;
+ int i;
+
+ /* Now reset the ESP chip */
+ esp_cmd(esp, ESP_CMD_RC);
+ esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
+ esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
+
+ /* Reload the configuration registers */
+ sbus_writeb(esp->cfact, esp->eregs + ESP_CFACT);
+ esp->prev_stp = 0;
+ sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
+ esp->prev_soff = 0;
+ sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
+ sbus_writeb(esp->neg_defp, esp->eregs + ESP_TIMEO);
+
+ /* This is the only point at which it is reliable to read
+ * the ID-code for a fast ESP chip variants.
+ */
+ esp->max_period = ((35 * esp->ccycle) / 1000);
+ if (esp->erev == fast) {
+ version = sbus_readb(esp->eregs + ESP_UID);
+ family_code = (version & 0xf8) >> 3;
+ if (family_code == 0x02)
+ esp->erev = fas236;
+ else if (family_code == 0x0a)
+ esp->erev = fashme; /* Version is usually '5'. */
+ else
+ esp->erev = fas100a;
+ ESPMISC(("esp%d: FAST chip is %s (family=%d, version=%d)\n",
+ esp->esp_id,
+ (esp->erev == fas236) ? "fas236" :
+ ((esp->erev == fas100a) ? "fas100a" :
+ "fasHME"), family_code, (version & 7)));
+
+ esp->min_period = ((4 * esp->ccycle) / 1000);
+ } else {
+ esp->min_period = ((5 * esp->ccycle) / 1000);
+ }
+ esp->max_period = (esp->max_period + 3)>>2;
+ esp->min_period = (esp->min_period + 3)>>2;
+
+ sbus_writeb(esp->config1, esp->eregs + ESP_CFG1);
+ switch (esp->erev) {
+ case esp100:
+ /* nothing to do */
+ break;
+ case esp100a:
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ break;
+ case esp236:
+ /* Slow 236 */
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ esp->prev_cfg3 = esp->config3[0];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ break;
+ case fashme:
+ esp->config2 |= (ESP_CONFIG2_HME32 | ESP_CONFIG2_HMEFENAB);
+ /* fallthrough... */
+ case fas236:
+ /* Fast 236 or HME */
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ for (i = 0; i < 16; i++) {
+ if (esp->erev == fashme) {
+ u8 cfg3;
+
+ cfg3 = ESP_CONFIG3_FCLOCK | ESP_CONFIG3_OBPUSH;
+ if (esp->scsi_id >= 8)
+ cfg3 |= ESP_CONFIG3_IDBIT3;
+ esp->config3[i] |= cfg3;
+ } else {
+ esp->config3[i] |= ESP_CONFIG3_FCLK;
+ }
+ }
+ esp->prev_cfg3 = esp->config3[0];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ if (esp->erev == fashme) {
+ esp->radelay = 80;
+ } else {
+ if (esp->diff)
+ esp->radelay = 0;
+ else
+ esp->radelay = 96;
+ }
+ break;
+ case fas100a:
+ /* Fast 100a */
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ for (i = 0; i < 16; i++)
+ esp->config3[i] |= ESP_CONFIG3_FCLOCK;
+ esp->prev_cfg3 = esp->config3[0];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ esp->radelay = 32;
+ break;
+ default:
+ panic("esp: what could it be... I wonder...");
+ break;
+ };
+
+ /* Eat any bitrot in the chip */
+ sbus_readb(esp->eregs + ESP_INTRPT);
+ udelay(100);
+}
+
+/* This places the ESP into a known state at boot time. */
+static void __init esp_bootup_reset(struct esp *esp)
+{
+ u8 tmp;
+
+ /* Reset the DMA */
+ esp_reset_dma(esp);
+
+ /* Reset the ESP */
+ esp_reset_esp(esp);
+
+ /* Reset the SCSI bus, but tell ESP not to generate an irq */
+ tmp = sbus_readb(esp->eregs + ESP_CFG1);
+ tmp |= ESP_CONFIG1_SRRDISAB;
+ sbus_writeb(tmp, esp->eregs + ESP_CFG1);
+
+ esp_cmd(esp, ESP_CMD_RS);
+ udelay(400);
+
+ sbus_writeb(esp->config1, esp->eregs + ESP_CFG1);
+
+ /* Eat any bitrot in the chip and we are done... */
+ sbus_readb(esp->eregs + ESP_INTRPT);
+}
+
+static void esp_chain_add(struct esp *esp)
+{
+ spin_lock_irq(&espchain_lock);
+ if (espchain) {
+ struct esp *elink = espchain;
+ while (elink->next)
+ elink = elink->next;
+ elink->next = esp;
+ } else {
+ espchain = esp;
+ }
+ esp->next = NULL;
+ spin_unlock_irq(&espchain_lock);
+}
+
+static void esp_chain_del(struct esp *esp)
+{
+ spin_lock_irq(&espchain_lock);
+ if (espchain == esp) {
+ espchain = esp->next;
+ } else {
+ struct esp *elink = espchain;
+ while (elink->next != esp)
+ elink = elink->next;
+ elink->next = esp->next;
+ }
+ esp->next = NULL;
+ spin_unlock_irq(&espchain_lock);
+}
+
+static int __init esp_find_dvma(struct esp *esp, struct sbus_dev *dma_sdev)
+{
+ struct sbus_dev *sdev = esp->sdev;
+ struct sbus_dma *dma;
+
+ if (dma_sdev != NULL) {
+ for_each_dvma(dma) {
+ if (dma->sdev == dma_sdev)
+ break;
+ }
+ } else {
+ for_each_dvma(dma) {
+ /* If allocated already, can't use it. */
+ if (dma->allocated)
+ continue;
+
+ if (dma->sdev == NULL)
+ break;
+
+ /* If bus + slot are the same and it has the
+ * correct OBP name, it's ours.
+ */
+ if (sdev->bus == dma->sdev->bus &&
+ sdev->slot == dma->sdev->slot &&
+ (!strcmp(dma->sdev->prom_name, "dma") ||
+ !strcmp(dma->sdev->prom_name, "espdma")))
+ break;
+ }
+ }
+
+ /* If we don't know how to handle the dvma,
+ * do not use this device.
+ */
+ if (dma == NULL) {
+ printk("Cannot find dvma for ESP%d's SCSI\n", esp->esp_id);
+ return -1;
+ }
+ if (dma->allocated) {
+ printk("esp%d: can't use my espdma\n", esp->esp_id);
+ return -1;
+ }
+ dma->allocated = 1;
+ esp->dma = dma;
+ esp->dregs = dma->regs;
+
+ return 0;
+}
+
+static int __init esp_map_regs(struct esp *esp, int hme)
+{
+ struct sbus_dev *sdev = esp->sdev;
+ struct resource *res;
+
+ /* On HME, two reg sets exist, first is DVMA,
+ * second is ESP registers.
+ */
+ if (hme)
+ res = &sdev->resource[1];
+ else
+ res = &sdev->resource[0];
+
+ esp->eregs = sbus_ioremap(res, 0, ESP_REG_SIZE, "ESP Registers");
+
+ if (esp->eregs == 0)
+ return -1;
+ return 0;
+}
+
+static int __init esp_map_cmdarea(struct esp *esp)
+{
+ struct sbus_dev *sdev = esp->sdev;
+
+ esp->esp_command = sbus_alloc_consistent(sdev, 16,
+ &esp->esp_command_dvma);
+ if (esp->esp_command == NULL ||
+ esp->esp_command_dvma == 0)
+ return -1;
+ return 0;
+}
+
+static int __init esp_register_irq(struct esp *esp)
+{
+ esp->ehost->irq = esp->irq = esp->sdev->irqs[0];
+
+ /* We used to try various overly-clever things to
+ * reduce the interrupt processing overhead on
+ * sun4c/sun4m when multiple ESP's shared the
+ * same IRQ. It was too complex and messy to
+ * sanely maintain.
+ */
+ if (request_irq(esp->ehost->irq, esp_intr,
+ SA_SHIRQ, "ESP SCSI", esp)) {
+ printk("esp%d: Cannot acquire irq line\n",
+ esp->esp_id);
+ return -1;
+ }
+
+ printk("esp%d: IRQ %s ", esp->esp_id,
+ __irq_itoa(esp->ehost->irq));
+
+ return 0;
+}
+
+static void __init esp_get_scsi_id(struct esp *esp)
+{
+ struct sbus_dev *sdev = esp->sdev;
+
+ esp->scsi_id = prom_getintdefault(esp->prom_node,
+ "initiator-id",
+ -1);
+ if (esp->scsi_id == -1)
+ esp->scsi_id = prom_getintdefault(esp->prom_node,
+ "scsi-initiator-id",
+ -1);
+ if (esp->scsi_id == -1)
+ esp->scsi_id = (sdev->bus == NULL) ? 7 :
+ prom_getintdefault(sdev->bus->prom_node,
+ "scsi-initiator-id",
+ 7);
+ esp->ehost->this_id = esp->scsi_id;
+ esp->scsi_id_mask = (1 << esp->scsi_id);
+
+}
+
+static void __init esp_get_clock_params(struct esp *esp)
+{
+ struct sbus_dev *sdev = esp->sdev;
+ int prom_node = esp->prom_node;
+ int sbus_prom_node;
+ unsigned int fmhz;
+ u8 ccf;
+
+ if (sdev != NULL && sdev->bus != NULL)
+ sbus_prom_node = sdev->bus->prom_node;
+ else
+ sbus_prom_node = 0;
+
+ /* This is getting messy but it has to be done
+ * correctly or else you get weird behavior all
+ * over the place. We are trying to basically
+ * figure out three pieces of information.
+ *
+ * a) Clock Conversion Factor
+ *
+ * This is a representation of the input
+ * crystal clock frequency going into the
+ * ESP on this machine. Any operation whose
+ * timing is longer than 400ns depends on this
+ * value being correct. For example, you'll
+ * get blips for arbitration/selection during
+ * high load or with multiple targets if this
+ * is not set correctly.
+ *
+ * b) Selection Time-Out
+ *
+ * The ESP isn't very bright and will arbitrate
+ * for the bus and try to select a target
+ * forever if you let it. This value tells
+ * the ESP when it has taken too long to
+ * negotiate and that it should interrupt
+ * the CPU so we can see what happened.
+ * The value is computed as follows (from
+ * NCR/Symbios chip docs).
+ *
+ * (Time Out Period) * (Input Clock)
+ * STO = ----------------------------------
+ * (8192) * (Clock Conversion Factor)
+ *
+ * You usually want the time out period to be
+ * around 250ms, I think we'll set it a little
+ * bit higher to account for fully loaded SCSI
+ * bus's and slow devices that don't respond so
+ * quickly to selection attempts. (yeah, I know
+ * this is out of spec. but there is a lot of
+ * buggy pieces of firmware out there so bite me)
+ *
+ * c) Imperical constants for synchronous offset
+ * and transfer period register values
+ *
+ * This entails the smallest and largest sync
+ * period we could ever handle on this ESP.
+ */
+
+ fmhz = prom_getintdefault(prom_node, "clock-frequency", -1);
+ if (fmhz == -1)
+ fmhz = (!sbus_prom_node) ? 0 :
+ prom_getintdefault(sbus_prom_node, "clock-frequency", -1);
+
+ if (fmhz <= (5000000))
+ ccf = 0;
+ else
+ ccf = (((5000000 - 1) + (fmhz))/(5000000));
+
+ if (!ccf || ccf > 8) {
+ /* If we can't find anything reasonable,
+ * just assume 20MHZ. This is the clock
+ * frequency of the older sun4c's where I've
+ * been unable to find the clock-frequency
+ * PROM property. All other machines provide
+ * useful values it seems.
+ */
+ ccf = ESP_CCF_F4;
+ fmhz = (20000000);
+ }
+
+ if (ccf == (ESP_CCF_F7 + 1))
+ esp->cfact = ESP_CCF_F0;
+ else if (ccf == ESP_CCF_NEVER)
+ esp->cfact = ESP_CCF_F2;
+ else
+ esp->cfact = ccf;
+ esp->raw_cfact = ccf;
+
+ esp->cfreq = fmhz;
+ esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz);
+ esp->ctick = ESP_TICK(ccf, esp->ccycle);
+ esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf);
+ esp->sync_defp = SYNC_DEFP_SLOW;
+
+ printk("SCSI ID %d Clk %dMHz CCYC=%d CCF=%d TOut %d ",
+ esp->scsi_id, (fmhz / 1000000),
+ (int)esp->ccycle, (int)ccf, (int) esp->neg_defp);
+}
+
+static void __init esp_get_bursts(struct esp *esp, struct sbus_dev *dma)
+{
+ struct sbus_dev *sdev = esp->sdev;
+ u8 bursts;
+
+ bursts = prom_getintdefault(esp->prom_node, "burst-sizes", 0xff);
+
+ if (dma) {
+ u8 tmp = prom_getintdefault(dma->prom_node,
+ "burst-sizes", 0xff);
+ if (tmp != 0xff)
+ bursts &= tmp;
+ }
+
+ if (sdev->bus) {
+ u8 tmp = prom_getintdefault(sdev->bus->prom_node,
+ "burst-sizes", 0xff);
+ if (tmp != 0xff)
+ bursts &= tmp;
+ }
+
+ if (bursts == 0xff ||
+ (bursts & DMA_BURST16) == 0 ||
+ (bursts & DMA_BURST32) == 0)
+ bursts = (DMA_BURST32 - 1);
+
+ esp->bursts = bursts;
+}
+
+static void __init esp_get_revision(struct esp *esp)
+{
+ u8 tmp;
+
+ esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7));
+ esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+
+ tmp = sbus_readb(esp->eregs + ESP_CFG2);
+ tmp &= ~ESP_CONFIG2_MAGIC;
+ if (tmp != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
+ /* If what we write to cfg2 does not come back, cfg2
+ * is not implemented, therefore this must be a plain
+ * esp100.
+ */
+ esp->erev = esp100;
+ printk("NCR53C90(esp100)\n");
+ } else {
+ esp->config2 = 0;
+ esp->prev_cfg3 = esp->config3[0] = 5;
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ sbus_writeb(0, esp->eregs + ESP_CFG3);
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+
+ tmp = sbus_readb(esp->eregs + ESP_CFG3);
+ if (tmp != 5) {
+ /* The cfg2 register is implemented, however
+ * cfg3 is not, must be esp100a.
+ */
+ esp->erev = esp100a;
+ printk("NCR53C90A(esp100a)\n");
+ } else {
+ int target;
+
+ for (target = 0; target < 16; target++)
+ esp->config3[target] = 0;
+ esp->prev_cfg3 = 0;
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+
+ /* All of cfg{1,2,3} implemented, must be one of
+ * the fas variants, figure out which one.
+ */
+ if (esp->raw_cfact > ESP_CCF_F5) {
+ esp->erev = fast;
+ esp->sync_defp = SYNC_DEFP_FAST;
+ printk("NCR53C9XF(espfast)\n");
+ } else {
+ esp->erev = esp236;
+ printk("NCR53C9x(esp236)\n");
+ }
+ esp->config2 = 0;
+ sbus_writeb(esp->config2, esp->eregs + ESP_CFG2);
+ }
+ }
+}
+
+static void __init esp_init_swstate(struct esp *esp)
+{
+ int i;
+
+ /* Command queues... */
+ esp->current_SC = NULL;
+ esp->disconnected_SC = NULL;
+ esp->issue_SC = NULL;
+
+ /* Target and current command state... */
+ esp->targets_present = 0;
+ esp->resetting_bus = 0;
+ esp->snip = 0;
+
+ init_waitqueue_head(&esp->reset_queue);
+
+ /* Debugging... */
+ for(i = 0; i < 32; i++)
+ esp->espcmdlog[i] = 0;
+ esp->espcmdent = 0;
+
+ /* MSG phase state... */
+ for(i = 0; i < 16; i++) {
+ esp->cur_msgout[i] = 0;
+ esp->cur_msgin[i] = 0;
+ }
+ esp->prevmsgout = esp->prevmsgin = 0;
+ esp->msgout_len = esp->msgin_len = 0;
+
+ /* Clear the one behind caches to hold unmatchable values. */
+ esp->prev_soff = esp->prev_stp = esp->prev_cfg3 = 0xff;
+ esp->prev_hme_dmacsr = 0xffffffff;
+}
+
+static int __init detect_one_esp(struct scsi_host_template *tpnt, struct sbus_dev *esp_dev,
+ struct sbus_dev *espdma, struct sbus_bus *sbus,
+ int id, int hme)
+{
+ struct Scsi_Host *esp_host = scsi_register(tpnt, sizeof(struct esp));
+ struct esp *esp;
+
+ if (!esp_host) {
+ printk("ESP: Cannot register SCSI host\n");
+ return -1;
+ }
+ if (hme)
+ esp_host->max_id = 16;
+ esp = (struct esp *) esp_host->hostdata;
+ esp->ehost = esp_host;
+ esp->sdev = esp_dev;
+ esp->esp_id = id;
+ esp->prom_node = esp_dev->prom_node;
+ prom_getstring(esp->prom_node, "name", esp->prom_name,
+ sizeof(esp->prom_name));
+
+ esp_chain_add(esp);
+ if (esp_find_dvma(esp, espdma) < 0)
+ goto fail_unlink;
+ if (esp_map_regs(esp, hme) < 0) {
+ printk("ESP registers unmappable");
+ goto fail_dvma_release;
+ }
+ if (esp_map_cmdarea(esp) < 0) {
+ printk("ESP DVMA transport area unmappable");
+ goto fail_unmap_regs;
+ }
+ if (esp_register_irq(esp) < 0)
+ goto fail_unmap_cmdarea;
+
+ esp_get_scsi_id(esp);
+
+ esp->diff = prom_getbool(esp->prom_node, "differential");
+ if (esp->diff)
+ printk("Differential ");
+
+ esp_get_clock_params(esp);
+ esp_get_bursts(esp, espdma);
+ esp_get_revision(esp);
+ esp_init_swstate(esp);
+
+ esp_bootup_reset(esp);
+
+ return 0;
+
+fail_unmap_cmdarea:
+ sbus_free_consistent(esp->sdev, 16,
+ (void *) esp->esp_command,
+ esp->esp_command_dvma);
+
+fail_unmap_regs:
+ sbus_iounmap(esp->eregs, ESP_REG_SIZE);
+
+fail_dvma_release:
+ esp->dma->allocated = 0;
+
+fail_unlink:
+ esp_chain_del(esp);
+ scsi_unregister(esp_host);
+ return -1;
+}
+
+/* Detecting ESP chips on the machine. This is the simple and easy
+ * version.
+ */
+
+#ifdef CONFIG_SUN4
+
+#include <asm/sun4paddr.h>
+
+static int __init esp_detect(struct scsi_host_template *tpnt)
+{
+ static struct sbus_dev esp_dev;
+ int esps_in_use = 0;
+
+ espchain = 0;
+
+ if (sun4_esp_physaddr) {
+ memset (&esp_dev, 0, sizeof(esp_dev));
+ esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr;
+ esp_dev.irqs[0] = 4;
+ esp_dev.resource[0].start = sun4_esp_physaddr;
+ esp_dev.resource[0].end = sun4_esp_physaddr + ESP_REG_SIZE - 1;
+ esp_dev.resource[0].flags = IORESOURCE_IO;
+
+ if (!detect_one_esp(tpnt, &esp_dev, NULL, NULL, 0, 0))
+ esps_in_use++;
+ printk("ESP: Total of 1 ESP hosts found, %d actually in use.\n", esps_in_use);
+ esps_running = esps_in_use;
+ }
+ return esps_in_use;
+}
+
+#else /* !CONFIG_SUN4 */
+
+static int __init esp_detect(struct scsi_host_template *tpnt)
+{
+ struct sbus_bus *sbus;
+ struct sbus_dev *esp_dev, *sbdev_iter;
+ int nesps = 0, esps_in_use = 0;
+
+ espchain = 0;
+ if (!sbus_root) {
+#ifdef CONFIG_PCI
+ return 0;
+#else
+ panic("No SBUS in esp_detect()");
+#endif
+ }
+ for_each_sbus(sbus) {
+ for_each_sbusdev(sbdev_iter, sbus) {
+ struct sbus_dev *espdma = NULL;
+ int hme = 0;
+
+ /* Is it an esp sbus device? */
+ esp_dev = sbdev_iter;
+ if (strcmp(esp_dev->prom_name, "esp") &&
+ strcmp(esp_dev->prom_name, "SUNW,esp")) {
+ if (!strcmp(esp_dev->prom_name, "SUNW,fas")) {
+ hme = 1;
+ espdma = esp_dev;
+ } else {
+ if (!esp_dev->child ||
+ (strcmp(esp_dev->prom_name, "espdma") &&
+ strcmp(esp_dev->prom_name, "dma")))
+ continue; /* nope... */
+ espdma = esp_dev;
+ esp_dev = esp_dev->child;
+ if (strcmp(esp_dev->prom_name, "esp") &&
+ strcmp(esp_dev->prom_name, "SUNW,esp"))
+ continue; /* how can this happen? */
+ }
+ }
+
+ if (detect_one_esp(tpnt, esp_dev, espdma, sbus, nesps++, hme) < 0)
+ continue;
+
+ esps_in_use++;
+ } /* for each sbusdev */
+ } /* for each sbus */
+ printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,
+ esps_in_use);
+ esps_running = esps_in_use;
+ return esps_in_use;
+}
+
+#endif /* !CONFIG_SUN4 */
+
+/*
+ */
+static int esp_release(struct Scsi_Host *host)
+{
+ struct esp *esp = (struct esp *) host->hostdata;
+
+ ESP_INTSOFF(esp->dregs);
+#if 0
+ esp_reset_dma(esp);
+ esp_reset_esp(esp);
+#endif
+
+ free_irq(esp->ehost->irq, esp);
+ sbus_free_consistent(esp->sdev, 16,
+ (void *) esp->esp_command, esp->esp_command_dvma);
+ sbus_iounmap(esp->eregs, ESP_REG_SIZE);
+ esp->dma->allocated = 0;
+ esp_chain_del(esp);
+
+ return 0;
+}
+
+/* The info function will return whatever useful
+ * information the developer sees fit. If not provided, then
+ * the name field will be used instead.
+ */
+static const char *esp_info(struct Scsi_Host *host)
+{
+ struct esp *esp;
+
+ esp = (struct esp *) host->hostdata;
+ switch (esp->erev) {
+ case esp100:
+ return "Sparc ESP100 (NCR53C90)";
+ case esp100a:
+ return "Sparc ESP100A (NCR53C90A)";
+ case esp236:
+ return "Sparc ESP236";
+ case fas236:
+ return "Sparc ESP236-FAST";
+ case fashme:
+ return "Sparc ESP366-HME";
+ case fas100a:
+ return "Sparc ESP100A-FAST";
+ default:
+ return "Bogon ESP revision";
+ };
+}
+
+/* From Wolfgang Stanglmeier's NCR scsi driver. */
+struct info_str
+{
+ char *buffer;
+ int length;
+ int offset;
+ int pos;
+};
+
+static void copy_mem_info(struct info_str *info, char *data, int len)
+{
+ if (info->pos + len > info->length)
+ len = info->length - info->pos;
+
+ if (info->pos + len < info->offset) {
+ info->pos += len;
+ return;
+ }
+ if (info->pos < info->offset) {
+ data += (info->offset - info->pos);
+ len -= (info->offset - info->pos);
+ }
+
+ if (len > 0) {
+ memcpy(info->buffer + info->pos, data, len);
+ info->pos += len;
+ }
+}
+
+static int copy_info(struct info_str *info, char *fmt, ...)
+{
+ va_list args;
+ char buf[81];
+ int len;
+
+ va_start(args, fmt);
+ len = vsprintf(buf, fmt, args);
+ va_end(args);
+
+ copy_mem_info(info, buf, len);
+ return len;
+}
+
+static int esp_host_info(struct esp *esp, char *ptr, off_t offset, int len)
+{
+ struct scsi_device *sdev;
+ struct info_str info;
+ int i;
+
+ info.buffer = ptr;
+ info.length = len;
+ info.offset = offset;
+ info.pos = 0;
+
+ copy_info(&info, "Sparc ESP Host Adapter:\n");
+ copy_info(&info, "\tPROM node\t\t%08x\n", (unsigned int) esp->prom_node);
+ copy_info(&info, "\tPROM name\t\t%s\n", esp->prom_name);
+ copy_info(&info, "\tESP Model\t\t");
+ switch (esp->erev) {
+ case esp100:
+ copy_info(&info, "ESP100\n");
+ break;
+ case esp100a:
+ copy_info(&info, "ESP100A\n");
+ break;
+ case esp236:
+ copy_info(&info, "ESP236\n");
+ break;
+ case fas236:
+ copy_info(&info, "FAS236\n");
+ break;
+ case fas100a:
+ copy_info(&info, "FAS100A\n");
+ break;
+ case fast:
+ copy_info(&info, "FAST\n");
+ break;
+ case fashme:
+ copy_info(&info, "Happy Meal FAS\n");
+ break;
+ case espunknown:
+ default:
+ copy_info(&info, "Unknown!\n");
+ break;
+ };
+ copy_info(&info, "\tDMA Revision\t\t");
+ switch (esp->dma->revision) {
+ case dvmarev0:
+ copy_info(&info, "Rev 0\n");
+ break;
+ case dvmaesc1:
+ copy_info(&info, "ESC Rev 1\n");
+ break;
+ case dvmarev1:
+ copy_info(&info, "Rev 1\n");
+ break;
+ case dvmarev2:
+ copy_info(&info, "Rev 2\n");
+ break;
+ case dvmarev3:
+ copy_info(&info, "Rev 3\n");
+ break;
+ case dvmarevplus:
+ copy_info(&info, "Rev 1+\n");
+ break;
+ case dvmahme:
+ copy_info(&info, "Rev HME/FAS\n");
+ break;
+ default:
+ copy_info(&info, "Unknown!\n");
+ break;
+ };
+ copy_info(&info, "\tLive Targets\t\t[ ");
+ for (i = 0; i < 15; i++) {
+ if (esp->targets_present & (1 << i))
+ copy_info(&info, "%d ", i);
+ }
+ copy_info(&info, "]\n\n");
+
+ /* Now describe the state of each existing target. */
+ copy_info(&info, "Target #\tconfig3\t\tSync Capabilities\tDisconnect\tWide\n");
+
+ shost_for_each_device(sdev, esp->ehost) {
+ struct esp_device *esp_dev = sdev->hostdata;
+ uint id = sdev->id;
+
+ if (!(esp->targets_present & (1 << id)))
+ continue;
+
+ copy_info(&info, "%d\t\t", id);
+ copy_info(&info, "%08lx\t", esp->config3[id]);
+ copy_info(&info, "[%02lx,%02lx]\t\t\t",
+ esp_dev->sync_max_offset,
+ esp_dev->sync_min_period);
+ copy_info(&info, "%s\t\t",
+ esp_dev->disconnect ? "yes" : "no");
+ copy_info(&info, "%s\n",
+ (esp->config3[id] & ESP_CONFIG3_EWIDE) ? "yes" : "no");
+ }
+ return info.pos > info.offset? info.pos - info.offset : 0;
+}
+
+/* ESP proc filesystem code. */
+static int esp_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
+ int length, int inout)
+{
+ struct esp *esp;
+
+ if (inout)
+ return -EINVAL; /* not yet */
+
+ for_each_esp(esp) {
+ if (esp->ehost == host)
+ break;
+ }
+ if (!esp)
+ return -EINVAL;
+
+ if (start)
+ *start = buffer;
+
+ return esp_host_info(esp, buffer, offset, length);
+}
+
+static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
+{
+ if (sp->use_sg == 0) {
+ sp->SCp.this_residual = sp->request_bufflen;
+ sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
+ sp->SCp.buffers_residual = 0;
+ if (sp->request_bufflen) {
+ sp->SCp.have_data_in = sbus_map_single(esp->sdev, sp->SCp.buffer,
+ sp->SCp.this_residual,
+ sp->sc_data_direction);
+ sp->SCp.ptr = (char *) ((unsigned long)sp->SCp.have_data_in);
+ } else {
+ sp->SCp.ptr = NULL;
+ }
+ } else {
+ sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+ sp->SCp.buffers_residual = sbus_map_sg(esp->sdev,
+ sp->SCp.buffer,
+ sp->use_sg,
+ sp->sc_data_direction);
+ sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer);
+ sp->SCp.ptr = (char *) ((unsigned long)sg_dma_address(sp->SCp.buffer));
+ }
+}
+
+static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
+{
+ if (sp->use_sg) {
+ sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg,
+ sp->sc_data_direction);
+ } else if (sp->request_bufflen) {
+ sbus_unmap_single(esp->sdev,
+ sp->SCp.have_data_in,
+ sp->request_bufflen,
+ sp->sc_data_direction);
+ }
+}
+
+static void esp_restore_pointers(struct esp *esp, struct scsi_cmnd *sp)
+{
+ struct esp_pointers *ep = &esp->data_pointers[sp->device->id];
+
+ sp->SCp.ptr = ep->saved_ptr;
+ sp->SCp.buffer = ep->saved_buffer;
+ sp->SCp.this_residual = ep->saved_this_residual;
+ sp->SCp.buffers_residual = ep->saved_buffers_residual;
+}
+
+static void esp_save_pointers(struct esp *esp, struct scsi_cmnd *sp)
+{
+ struct esp_pointers *ep = &esp->data_pointers[sp->device->id];
+
+ ep->saved_ptr = sp->SCp.ptr;
+ ep->saved_buffer = sp->SCp.buffer;
+ ep->saved_this_residual = sp->SCp.this_residual;
+ ep->saved_buffers_residual = sp->SCp.buffers_residual;
+}
+
+/* Some rules:
+ *
+ * 1) Never ever panic while something is live on the bus.
+ * If there is to be any chance of syncing the disks this
+ * rule is to be obeyed.
+ *
+ * 2) Any target that causes a foul condition will no longer
+ * have synchronous transfers done to it, no questions
+ * asked.
+ *
+ * 3) Keep register accesses to a minimum. Think about some
+ * day when we have Xbus machines this is running on and
+ * the ESP chip is on the other end of the machine on a
+ * different board from the cpu where this is running.
+ */
+
+/* Fire off a command. We assume the bus is free and that the only
+ * case where we could see an interrupt is where we have disconnected
+ * commands active and they are trying to reselect us.
+ */
+static inline void esp_check_cmd(struct esp *esp, struct scsi_cmnd *sp)
+{
+ switch (sp->cmd_len) {
+ case 6:
+ case 10:
+ case 12:
+ esp->esp_slowcmd = 0;
+ break;
+
+ default:
+ esp->esp_slowcmd = 1;
+ esp->esp_scmdleft = sp->cmd_len;
+ esp->esp_scmdp = &sp->cmnd[0];
+ break;
+ };
+}
+
+static inline void build_sync_nego_msg(struct esp *esp, int period, int offset)
+{
+ esp->cur_msgout[0] = EXTENDED_MESSAGE;
+ esp->cur_msgout[1] = 3;
+ esp->cur_msgout[2] = EXTENDED_SDTR;
+ esp->cur_msgout[3] = period;
+ esp->cur_msgout[4] = offset;
+ esp->msgout_len = 5;
+}
+
+/* SIZE is in bits, currently HME only supports 16 bit wide transfers. */
+static inline void build_wide_nego_msg(struct esp *esp, int size)
+{
+ esp->cur_msgout[0] = EXTENDED_MESSAGE;
+ esp->cur_msgout[1] = 2;
+ esp->cur_msgout[2] = EXTENDED_WDTR;
+ switch (size) {
+ case 32:
+ esp->cur_msgout[3] = 2;
+ break;
+ case 16:
+ esp->cur_msgout[3] = 1;
+ break;
+ case 8:
+ default:
+ esp->cur_msgout[3] = 0;
+ break;
+ };
+
+ esp->msgout_len = 4;
+}
+
+static void esp_exec_cmd(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr;
+ struct scsi_device *SDptr;
+ struct esp_device *esp_dev;
+ volatile u8 *cmdp = esp->esp_command;
+ u8 the_esp_command;
+ int lun, target;
+ int i;
+
+ /* Hold off if we have disconnected commands and
+ * an IRQ is showing...
+ */
+ if (esp->disconnected_SC && ESP_IRQ_P(esp->dregs))
+ return;
+
+ /* Grab first member of the issue queue. */
+ SCptr = esp->current_SC = remove_first_SC(&esp->issue_SC);
+
+ /* Safe to panic here because current_SC is null. */
+ if (!SCptr)
+ panic("esp: esp_exec_cmd and issue queue is NULL");
+
+ SDptr = SCptr->device;
+ esp_dev = SDptr->hostdata;
+ lun = SCptr->device->lun;
+ target = SCptr->device->id;
+
+ esp->snip = 0;
+ esp->msgout_len = 0;
+
+ /* Send it out whole, or piece by piece? The ESP
+ * only knows how to automatically send out 6, 10,
+ * and 12 byte commands. I used to think that the
+ * Linux SCSI code would never throw anything other
+ * than that to us, but then again there is the
+ * SCSI generic driver which can send us anything.
+ */
+ esp_check_cmd(esp, SCptr);
+
+ /* If arbitration/selection is successful, the ESP will leave
+ * ATN asserted, causing the target to go into message out
+ * phase. The ESP will feed the target the identify and then
+ * the target can only legally go to one of command,
+ * datain/out, status, or message in phase, or stay in message
+ * out phase (should we be trying to send a sync negotiation
+ * message after the identify). It is not allowed to drop
+ * BSY, but some buggy targets do and we check for this
+ * condition in the selection complete code. Most of the time
+ * we'll make the command bytes available to the ESP and it
+ * will not interrupt us until it finishes command phase, we
+ * cannot do this for command sizes the ESP does not
+ * understand and in this case we'll get interrupted right
+ * when the target goes into command phase.
+ *
+ * It is absolutely _illegal_ in the presence of SCSI-2 devices
+ * to use the ESP select w/o ATN command. When SCSI-2 devices are
+ * present on the bus we _must_ always go straight to message out
+ * phase with an identify message for the target. Being that
+ * selection attempts in SCSI-1 w/o ATN was an option, doing SCSI-2
+ * selections should not confuse SCSI-1 we hope.
+ */
+
+ if (esp_dev->sync) {
+ /* this targets sync is known */
+#ifndef __sparc_v9__
+do_sync_known:
+#endif
+ if (esp_dev->disconnect)
+ *cmdp++ = IDENTIFY(1, lun);
+ else
+ *cmdp++ = IDENTIFY(0, lun);
+
+ if (esp->esp_slowcmd) {
+ the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
+ esp_advance_phase(SCptr, in_slct_stop);
+ } else {
+ the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
+ esp_advance_phase(SCptr, in_slct_norm);
+ }
+ } else if (!(esp->targets_present & (1<<target)) || !(esp_dev->disconnect)) {
+ /* After the bootup SCSI code sends both the
+ * TEST_UNIT_READY and INQUIRY commands we want
+ * to at least attempt allowing the device to
+ * disconnect.
+ */
+ ESPMISC(("esp: Selecting device for first time. target=%d "
+ "lun=%d\n", target, SCptr->device->lun));
+ if (!SDptr->borken && !esp_dev->disconnect)
+ esp_dev->disconnect = 1;
+
+ *cmdp++ = IDENTIFY(0, lun);
+ esp->prevmsgout = NOP;
+ esp_advance_phase(SCptr, in_slct_norm);
+ the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
+
+ /* Take no chances... */
+ esp_dev->sync_max_offset = 0;
+ esp_dev->sync_min_period = 0;
+ } else {
+ /* Sorry, I have had way too many problems with
+ * various CDROM devices on ESP. -DaveM
+ */
+ int cdrom_hwbug_wkaround = 0;
+
+#ifndef __sparc_v9__
+ /* Never allow disconnects or synchronous transfers on
+ * SparcStation1 and SparcStation1+. Allowing those
+ * to be enabled seems to lockup the machine completely.
+ */
+ if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) ||
+ (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) {
+ /* But we are nice and allow tapes and removable
+ * disks (but not CDROMs) to disconnect.
+ */
+ if(SDptr->type == TYPE_TAPE ||
+ (SDptr->type != TYPE_ROM && SDptr->removable))
+ esp_dev->disconnect = 1;
+ else
+ esp_dev->disconnect = 0;
+ esp_dev->sync_max_offset = 0;
+ esp_dev->sync_min_period = 0;
+ esp_dev->sync = 1;
+ esp->snip = 0;
+ goto do_sync_known;
+ }
+#endif /* !(__sparc_v9__) */
+
+ /* We've talked to this guy before,
+ * but never negotiated. Let's try,
+ * need to attempt WIDE first, before
+ * sync nego, as per SCSI 2 standard.
+ */
+ if (esp->erev == fashme && !esp_dev->wide) {
+ if (!SDptr->borken &&
+ SDptr->type != TYPE_ROM &&
+ SDptr->removable == 0) {
+ build_wide_nego_msg(esp, 16);
+ esp_dev->wide = 1;
+ esp->wnip = 1;
+ goto after_nego_msg_built;
+ } else {
+ esp_dev->wide = 1;
+ /* Fall through and try sync. */
+ }
+ }
+
+ if (!SDptr->borken) {
+ if ((SDptr->type == TYPE_ROM)) {
+ /* Nice try sucker... */
+ ESPMISC(("esp%d: Disabling sync for buggy "
+ "CDROM.\n", esp->esp_id));
+ cdrom_hwbug_wkaround = 1;
+ build_sync_nego_msg(esp, 0, 0);
+ } else if (SDptr->removable != 0) {
+ ESPMISC(("esp%d: Not negotiating sync/wide but "
+ "allowing disconnect for removable media.\n",
+ esp->esp_id));
+ build_sync_nego_msg(esp, 0, 0);
+ } else {
+ build_sync_nego_msg(esp, esp->sync_defp, 15);
+ }
+ } else {
+ build_sync_nego_msg(esp, 0, 0);
+ }
+ esp_dev->sync = 1;
+ esp->snip = 1;
+
+after_nego_msg_built:
+ /* A fix for broken SCSI1 targets, when they disconnect
+ * they lock up the bus and confuse ESP. So disallow
+ * disconnects for SCSI1 targets for now until we
+ * find a better fix.
+ *
+ * Addendum: This is funny, I figured out what was going
+ * on. The blotzed SCSI1 target would disconnect,
+ * one of the other SCSI2 targets or both would be
+ * disconnected as well. The SCSI1 target would
+ * stay disconnected long enough that we start
+ * up a command on one of the SCSI2 targets. As
+ * the ESP is arbitrating for the bus the SCSI1
+ * target begins to arbitrate as well to reselect
+ * the ESP. The SCSI1 target refuses to drop it's
+ * ID bit on the data bus even though the ESP is
+ * at ID 7 and is the obvious winner for any
+ * arbitration. The ESP is a poor sport and refuses
+ * to lose arbitration, it will continue indefinitely
+ * trying to arbitrate for the bus and can only be
+ * stopped via a chip reset or SCSI bus reset.
+ * Therefore _no_ disconnects for SCSI1 targets
+ * thank you very much. ;-)
+ */
+ if(((SDptr->scsi_level < 3) &&
+ (SDptr->type != TYPE_TAPE) &&
+ SDptr->removable == 0) ||
+ cdrom_hwbug_wkaround || SDptr->borken) {
+ ESPMISC((KERN_INFO "esp%d: Disabling DISCONNECT for target %d "
+ "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
+ esp_dev->disconnect = 0;
+ *cmdp++ = IDENTIFY(0, lun);
+ } else {
+ *cmdp++ = IDENTIFY(1, lun);
+ }
+
+ /* ESP fifo is only so big...
+ * Make this look like a slow command.
+ */
+ esp->esp_slowcmd = 1;
+ esp->esp_scmdleft = SCptr->cmd_len;
+ esp->esp_scmdp = &SCptr->cmnd[0];
+
+ the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
+ esp_advance_phase(SCptr, in_slct_msg);
+ }
+
+ if (!esp->esp_slowcmd)
+ for (i = 0; i < SCptr->cmd_len; i++)
+ *cmdp++ = SCptr->cmnd[i];
+
+ /* HME sucks... */
+ if (esp->erev == fashme)
+ sbus_writeb((target & 0xf) | (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT),
+ esp->eregs + ESP_BUSID);
+ else
+ sbus_writeb(target & 7, esp->eregs + ESP_BUSID);
+ if (esp->prev_soff != esp_dev->sync_max_offset ||
+ esp->prev_stp != esp_dev->sync_min_period ||
+ (esp->erev > esp100a &&
+ esp->prev_cfg3 != esp->config3[target])) {
+ esp->prev_soff = esp_dev->sync_max_offset;
+ esp->prev_stp = esp_dev->sync_min_period;
+ sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
+ sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
+ if (esp->erev > esp100a) {
+ esp->prev_cfg3 = esp->config3[target];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ }
+ }
+ i = (cmdp - esp->esp_command);
+
+ if (esp->erev == fashme) {
+ esp_cmd(esp, ESP_CMD_FLUSH); /* Grrr! */
+
+ /* Set up the DMA and HME counters */
+ sbus_writeb(i, esp->eregs + ESP_TCLOW);
+ sbus_writeb(0, esp->eregs + ESP_TCMED);
+ sbus_writeb(0, esp->eregs + FAS_RLO);
+ sbus_writeb(0, esp->eregs + FAS_RHI);
+ esp_cmd(esp, the_esp_command);
+
+ /* Talk about touchy hardware... */
+ esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
+ (DMA_SCSI_DISAB | DMA_ENABLE)) &
+ ~(DMA_ST_WRITE));
+ sbus_writel(16, esp->dregs + DMA_COUNT);
+ sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
+ sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
+ } else {
+ u32 tmp;
+
+ /* Set up the DMA and ESP counters */
+ sbus_writeb(i, esp->eregs + ESP_TCLOW);
+ sbus_writeb(0, esp->eregs + ESP_TCMED);
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ tmp &= ~DMA_ST_WRITE;
+ tmp |= DMA_ENABLE;
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ if (esp->dma->revision == dvmaesc1) {
+ if (i) /* Workaround ESC gate array SBUS rerun bug. */
+ sbus_writel(PAGE_SIZE, esp->dregs + DMA_COUNT);
+ }
+ sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
+
+ /* Tell ESP to "go". */
+ esp_cmd(esp, the_esp_command);
+ }
+}
+
+/* Queue a SCSI command delivered from the mid-level Linux SCSI code. */
+static int esp_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+{
+ struct esp *esp;
+
+ /* Set up func ptr and initial driver cmd-phase. */
+ SCpnt->scsi_done = done;
+ SCpnt->SCp.phase = not_issued;
+
+ /* We use the scratch area. */
+ ESPQUEUE(("esp_queue: target=%d lun=%d ", SCpnt->device->id, SCpnt->device->lun));
+ ESPDISC(("N<%02x,%02x>", SCpnt->device->id, SCpnt->device->lun));
+
+ esp = (struct esp *) SCpnt->device->host->hostdata;
+ esp_get_dmabufs(esp, SCpnt);
+ esp_save_pointers(esp, SCpnt); /* FIXME for tag queueing */
+
+ SCpnt->SCp.Status = CHECK_CONDITION;
+ SCpnt->SCp.Message = 0xff;
+ SCpnt->SCp.sent_command = 0;
+
+ /* Place into our queue. */
+ if (SCpnt->cmnd[0] == REQUEST_SENSE) {
+ ESPQUEUE(("RQSENSE\n"));
+ prepend_SC(&esp->issue_SC, SCpnt);
+ } else {
+ ESPQUEUE(("\n"));
+ append_SC(&esp->issue_SC, SCpnt);
+ }
+
+ /* Run it now if we can. */
+ if (!esp->current_SC && !esp->resetting_bus)
+ esp_exec_cmd(esp);
+
+ return 0;
+}
+
+/* Dump driver state. */
+static void esp_dump_cmd(struct scsi_cmnd *SCptr)
+{
+ ESPLOG(("[tgt<%02x> lun<%02x> "
+ "pphase<%s> cphase<%s>]",
+ SCptr->device->id, SCptr->device->lun,
+ phase_string(SCptr->SCp.sent_command),
+ phase_string(SCptr->SCp.phase)));
+}
+
+static void esp_dump_state(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+#ifdef DEBUG_ESP_CMDS
+ int i;
+#endif
+
+ ESPLOG(("esp%d: dumping state\n", esp->esp_id));
+ ESPLOG(("esp%d: dma -- cond_reg<%08x> addr<%08x>\n",
+ esp->esp_id,
+ sbus_readl(esp->dregs + DMA_CSR),
+ sbus_readl(esp->dregs + DMA_ADDR)));
+ ESPLOG(("esp%d: SW [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
+ esp->esp_id, esp->sreg, esp->seqreg, esp->ireg));
+ ESPLOG(("esp%d: HW reread [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
+ esp->esp_id,
+ sbus_readb(esp->eregs + ESP_STATUS),
+ sbus_readb(esp->eregs + ESP_SSTEP),
+ sbus_readb(esp->eregs + ESP_INTRPT)));
+#ifdef DEBUG_ESP_CMDS
+ printk("esp%d: last ESP cmds [", esp->esp_id);
+ i = (esp->espcmdent - 1) & 31;
+ printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
+ i = (i - 1) & 31;
+ printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
+ i = (i - 1) & 31;
+ printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
+ i = (i - 1) & 31;
+ printk("<"); esp_print_cmd(esp->espcmdlog[i]); printk(">");
+ printk("]\n");
+#endif /* (DEBUG_ESP_CMDS) */
+
+ if (SCptr) {
+ ESPLOG(("esp%d: current command ", esp->esp_id));
+ esp_dump_cmd(SCptr);
+ }
+ ESPLOG(("\n"));
+ SCptr = esp->disconnected_SC;
+ ESPLOG(("esp%d: disconnected ", esp->esp_id));
+ while (SCptr) {
+ esp_dump_cmd(SCptr);
+ SCptr = (struct scsi_cmnd *) SCptr->host_scribble;
+ }
+ ESPLOG(("\n"));
+}
+
+/* Abort a command. The host_lock is acquired by caller. */
+static int esp_abort(struct scsi_cmnd *SCptr)
+{
+ struct esp *esp = (struct esp *) SCptr->device->host->hostdata;
+ int don;
+
+ ESPLOG(("esp%d: Aborting command\n", esp->esp_id));
+ esp_dump_state(esp);
+
+ /* Wheee, if this is the current command on the bus, the
+ * best we can do is assert ATN and wait for msgout phase.
+ * This should even fix a hung SCSI bus when we lose state
+ * in the driver and timeout because the eventual phase change
+ * will cause the ESP to (eventually) give an interrupt.
+ */
+ if (esp->current_SC == SCptr) {
+ esp->cur_msgout[0] = ABORT;
+ esp->msgout_len = 1;
+ esp->msgout_ctr = 0;
+ esp_cmd(esp, ESP_CMD_SATN);
+ return SUCCESS;
+ }
+
+ /* If it is still in the issue queue then we can safely
+ * call the completion routine and report abort success.
+ */
+ don = (sbus_readl(esp->dregs + DMA_CSR) & DMA_INT_ENAB);
+ if (don) {
+ ESP_INTSOFF(esp->dregs);
+ }
+ if (esp->issue_SC) {
+ struct scsi_cmnd **prev, *this;
+ for (prev = (&esp->issue_SC), this = esp->issue_SC;
+ this != NULL;
+ prev = (struct scsi_cmnd **) &(this->host_scribble),
+ this = (struct scsi_cmnd *) this->host_scribble) {
+
+ if (this == SCptr) {
+ *prev = (struct scsi_cmnd *) this->host_scribble;
+ this->host_scribble = NULL;
+
+ esp_release_dmabufs(esp, this);
+ this->result = DID_ABORT << 16;
+ this->scsi_done(this);
+
+ if (don)
+ ESP_INTSON(esp->dregs);
+
+ return SUCCESS;
+ }
+ }
+ }
+
+ /* Yuck, the command to abort is disconnected, it is not
+ * worth trying to abort it now if something else is live
+ * on the bus at this time. So, we let the SCSI code wait
+ * a little bit and try again later.
+ */
+ if (esp->current_SC) {
+ if (don)
+ ESP_INTSON(esp->dregs);
+ return FAILED;
+ }
+
+ /* It's disconnected, we have to reconnect to re-establish
+ * the nexus and tell the device to abort. However, we really
+ * cannot 'reconnect' per se. Don't try to be fancy, just
+ * indicate failure, which causes our caller to reset the whole
+ * bus.
+ */
+
+ if (don)
+ ESP_INTSON(esp->dregs);
+
+ return FAILED;
+}
+
+/* We've sent ESP_CMD_RS to the ESP, the interrupt had just
+ * arrived indicating the end of the SCSI bus reset. Our job
+ * is to clean out the command queues and begin re-execution
+ * of SCSI commands once more.
+ */
+static int esp_finish_reset(struct esp *esp)
+{
+ struct scsi_cmnd *sp = esp->current_SC;
+
+ /* Clean up currently executing command, if any. */
+ if (sp != NULL) {
+ esp->current_SC = NULL;
+
+ esp_release_dmabufs(esp, sp);
+ sp->result = (DID_RESET << 16);
+
+ sp->scsi_done(sp);
+ }
+
+ /* Clean up disconnected queue, they have been invalidated
+ * by the bus reset.
+ */
+ if (esp->disconnected_SC) {
+ while ((sp = remove_first_SC(&esp->disconnected_SC)) != NULL) {
+ esp_release_dmabufs(esp, sp);
+ sp->result = (DID_RESET << 16);
+
+ sp->scsi_done(sp);
+ }
+ }
+
+ /* SCSI bus reset is complete. */
+ esp->resetting_bus = 0;
+ wake_up(&esp->reset_queue);
+
+ /* Ok, now it is safe to get commands going once more. */
+ if (esp->issue_SC)
+ esp_exec_cmd(esp);
+
+ return do_intr_end;
+}
+
+static int esp_do_resetbus(struct esp *esp)
+{
+ ESPLOG(("esp%d: Resetting scsi bus\n", esp->esp_id));
+ esp->resetting_bus = 1;
+ esp_cmd(esp, ESP_CMD_RS);
+
+ return do_intr_end;
+}
+
+/* Reset ESP chip, reset hanging bus, then kill active and
+ * disconnected commands for targets without soft reset.
+ *
+ * The host_lock is acquired by caller.
+ */
+static int esp_reset(struct scsi_cmnd *SCptr)
+{
+ struct esp *esp = (struct esp *) SCptr->device->host->hostdata;
+
+ (void) esp_do_resetbus(esp);
+
+ spin_unlock_irq(esp->ehost->host_lock);
+
+ wait_event(esp->reset_queue, (esp->resetting_bus == 0));
+
+ spin_lock_irq(esp->ehost->host_lock);
+
+ return SUCCESS;
+}
+
+/* Internal ESP done function. */
+static void esp_done(struct esp *esp, int error)
+{
+ struct scsi_cmnd *done_SC = esp->current_SC;
+
+ esp->current_SC = NULL;
+
+ esp_release_dmabufs(esp, done_SC);
+ done_SC->result = error;
+
+ done_SC->scsi_done(done_SC);
+
+ /* Bus is free, issue any commands in the queue. */
+ if (esp->issue_SC && !esp->current_SC)
+ esp_exec_cmd(esp);
+
+}
+
+/* Wheee, ESP interrupt engine. */
+
+/* Forward declarations. */
+static int esp_do_phase_determine(struct esp *esp);
+static int esp_do_data_finale(struct esp *esp);
+static int esp_select_complete(struct esp *esp);
+static int esp_do_status(struct esp *esp);
+static int esp_do_msgin(struct esp *esp);
+static int esp_do_msgindone(struct esp *esp);
+static int esp_do_msgout(struct esp *esp);
+static int esp_do_cmdbegin(struct esp *esp);
+
+#define sreg_datainp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DIP)
+#define sreg_dataoutp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DOP)
+
+/* Read any bytes found in the FAS366 fifo, storing them into
+ * the ESP driver software state structure.
+ */
+static void hme_fifo_read(struct esp *esp)
+{
+ u8 count = 0;
+ u8 status = esp->sreg;
+
+ /* Cannot safely frob the fifo for these following cases, but
+ * we must always read the fifo when the reselect interrupt
+ * is pending.
+ */
+ if (((esp->ireg & ESP_INTR_RSEL) == 0) &&
+ (sreg_datainp(status) ||
+ sreg_dataoutp(status) ||
+ (esp->current_SC &&
+ esp->current_SC->SCp.phase == in_data_done))) {
+ ESPHME(("<wkaround_skipped>"));
+ } else {
+ unsigned long fcnt = sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES;
+
+ /* The HME stores bytes in multiples of 2 in the fifo. */
+ ESPHME(("hme_fifo[fcnt=%d", (int)fcnt));
+ while (fcnt) {
+ esp->hme_fifo_workaround_buffer[count++] =
+ sbus_readb(esp->eregs + ESP_FDATA);
+ esp->hme_fifo_workaround_buffer[count++] =
+ sbus_readb(esp->eregs + ESP_FDATA);
+ ESPHME(("<%02x,%02x>", esp->hme_fifo_workaround_buffer[count-2], esp->hme_fifo_workaround_buffer[count-1]));
+ fcnt--;
+ }
+ if (sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_F1BYTE) {
+ ESPHME(("<poke_byte>"));
+ sbus_writeb(0, esp->eregs + ESP_FDATA);
+ esp->hme_fifo_workaround_buffer[count++] =
+ sbus_readb(esp->eregs + ESP_FDATA);
+ ESPHME(("<%02x,0x00>", esp->hme_fifo_workaround_buffer[count-1]));
+ ESPHME(("CMD_FLUSH"));
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ } else {
+ ESPHME(("no_xtra_byte"));
+ }
+ }
+ ESPHME(("wkarnd_cnt=%d]", (int)count));
+ esp->hme_fifo_workaround_count = count;
+}
+
+static inline void hme_fifo_push(struct esp *esp, u8 *bytes, u8 count)
+{
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ while (count) {
+ u8 tmp = *bytes++;
+ sbus_writeb(tmp, esp->eregs + ESP_FDATA);
+ sbus_writeb(0, esp->eregs + ESP_FDATA);
+ count--;
+ }
+}
+
+/* We try to avoid some interrupts by jumping ahead and see if the ESP
+ * has gotten far enough yet. Hence the following.
+ */
+static inline int skipahead1(struct esp *esp, struct scsi_cmnd *scp,
+ int prev_phase, int new_phase)
+{
+ if (scp->SCp.sent_command != prev_phase)
+ return 0;
+ if (ESP_IRQ_P(esp->dregs)) {
+ /* Yes, we are able to save an interrupt. */
+ if (esp->erev == fashme)
+ esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
+ esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR));
+ esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
+ if (esp->erev == fashme) {
+ /* This chip is really losing. */
+ ESPHME(("HME["));
+ /* Must latch fifo before reading the interrupt
+ * register else garbage ends up in the FIFO
+ * which confuses the driver utterly.
+ * Happy Meal indeed....
+ */
+ ESPHME(("fifo_workaround]"));
+ if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
+ (esp->sreg2 & ESP_STAT2_F1BYTE))
+ hme_fifo_read(esp);
+ }
+ if (!(esp->ireg & ESP_INTR_SR))
+ return 0;
+ else
+ return do_reset_complete;
+ }
+ /* Ho hum, target is taking forever... */
+ scp->SCp.sent_command = new_phase; /* so we don't recurse... */
+ return do_intr_end;
+}
+
+static inline int skipahead2(struct esp *esp, struct scsi_cmnd *scp,
+ int prev_phase1, int prev_phase2, int new_phase)
+{
+ if (scp->SCp.sent_command != prev_phase1 &&
+ scp->SCp.sent_command != prev_phase2)
+ return 0;
+ if (ESP_IRQ_P(esp->dregs)) {
+ /* Yes, we are able to save an interrupt. */
+ if (esp->erev == fashme)
+ esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
+ esp->sreg = (sbus_readb(esp->eregs + ESP_STATUS) & ~(ESP_STAT_INTR));
+ esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
+ if (esp->erev == fashme) {
+ /* This chip is really losing. */
+ ESPHME(("HME["));
+
+ /* Must latch fifo before reading the interrupt
+ * register else garbage ends up in the FIFO
+ * which confuses the driver utterly.
+ * Happy Meal indeed....
+ */
+ ESPHME(("fifo_workaround]"));
+ if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
+ (esp->sreg2 & ESP_STAT2_F1BYTE))
+ hme_fifo_read(esp);
+ }
+ if (!(esp->ireg & ESP_INTR_SR))
+ return 0;
+ else
+ return do_reset_complete;
+ }
+ /* Ho hum, target is taking forever... */
+ scp->SCp.sent_command = new_phase; /* so we don't recurse... */
+ return do_intr_end;
+}
+
+/* Now some dma helpers. */
+static void dma_setup(struct esp *esp, __u32 addr, int count, int write)
+{
+ u32 nreg = sbus_readl(esp->dregs + DMA_CSR);
+
+ if (write)
+ nreg |= DMA_ST_WRITE;
+ else
+ nreg &= ~(DMA_ST_WRITE);
+ nreg |= DMA_ENABLE;
+ sbus_writel(nreg, esp->dregs + DMA_CSR);
+ if (esp->dma->revision == dvmaesc1) {
+ /* This ESC gate array sucks! */
+ __u32 src = addr;
+ __u32 dest = src + count;
+
+ if (dest & (PAGE_SIZE - 1))
+ count = PAGE_ALIGN(count);
+ sbus_writel(count, esp->dregs + DMA_COUNT);
+ }
+ sbus_writel(addr, esp->dregs + DMA_ADDR);
+}
+
+static void dma_drain(struct esp *esp)
+{
+ u32 tmp;
+
+ if (esp->dma->revision == dvmahme)
+ return;
+ if ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_FIFO_ISDRAIN) {
+ switch (esp->dma->revision) {
+ default:
+ tmp |= DMA_FIFO_STDRAIN;
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+
+ case dvmarev3:
+ case dvmaesc1:
+ while (sbus_readl(esp->dregs + DMA_CSR) & DMA_FIFO_ISDRAIN)
+ udelay(1);
+ };
+ }
+}
+
+static void dma_invalidate(struct esp *esp)
+{
+ u32 tmp;
+
+ if (esp->dma->revision == dvmahme) {
+ sbus_writel(DMA_RST_SCSI, esp->dregs + DMA_CSR);
+
+ esp->prev_hme_dmacsr = ((esp->prev_hme_dmacsr |
+ (DMA_PARITY_OFF | DMA_2CLKS |
+ DMA_SCSI_DISAB | DMA_INT_ENAB)) &
+ ~(DMA_ST_WRITE | DMA_ENABLE));
+
+ sbus_writel(0, esp->dregs + DMA_CSR);
+ sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
+
+ /* This is necessary to avoid having the SCSI channel
+ * engine lock up on us.
+ */
+ sbus_writel(0, esp->dregs + DMA_ADDR);
+ } else {
+ while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ)
+ udelay(1);
+
+ tmp &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB);
+ tmp |= DMA_FIFO_INV;
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ tmp &= ~DMA_FIFO_INV;
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ }
+}
+
+static inline void dma_flashclear(struct esp *esp)
+{
+ dma_drain(esp);
+ dma_invalidate(esp);
+}
+
+static int dma_can_transfer(struct esp *esp, struct scsi_cmnd *sp)
+{
+ __u32 base, end, sz;
+
+ if (esp->dma->revision == dvmarev3) {
+ sz = sp->SCp.this_residual;
+ if (sz > 0x1000000)
+ sz = 0x1000000;
+ } else {
+ base = ((__u32)((unsigned long)sp->SCp.ptr));
+ base &= (0x1000000 - 1);
+ end = (base + sp->SCp.this_residual);
+ if (end > 0x1000000)
+ end = 0x1000000;
+ sz = (end - base);
+ }
+ return sz;
+}
+
+/* Misc. esp helper macros. */
+#define esp_setcount(__eregs, __cnt, __hme) \
+ sbus_writeb(((__cnt)&0xff), (__eregs) + ESP_TCLOW); \
+ sbus_writeb((((__cnt)>>8)&0xff), (__eregs) + ESP_TCMED); \
+ if (__hme) { \
+ sbus_writeb((((__cnt)>>16)&0xff), (__eregs) + FAS_RLO); \
+ sbus_writeb(0, (__eregs) + FAS_RHI); \
+ }
+
+#define esp_getcount(__eregs, __hme) \
+ ((sbus_readb((__eregs) + ESP_TCLOW)&0xff) | \
+ ((sbus_readb((__eregs) + ESP_TCMED)&0xff) << 8) | \
+ ((__hme) ? sbus_readb((__eregs) + FAS_RLO) << 16 : 0))
+
+#define fcount(__esp) \
+ (((__esp)->erev == fashme) ? \
+ (__esp)->hme_fifo_workaround_count : \
+ sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_FBYTES)
+
+#define fnzero(__esp) \
+ (((__esp)->erev == fashme) ? 0 : \
+ sbus_readb(((__esp)->eregs) + ESP_FFLAGS) & ESP_FF_ONOTZERO)
+
+/* XXX speculative nops unnecessary when continuing amidst a data phase
+ * XXX even on esp100!!! another case of flooding the bus with I/O reg
+ * XXX writes...
+ */
+#define esp_maybe_nop(__esp) \
+ if ((__esp)->erev == esp100) \
+ esp_cmd((__esp), ESP_CMD_NULL)
+
+#define sreg_to_dataphase(__sreg) \
+ ((((__sreg) & ESP_STAT_PMASK) == ESP_DOP) ? in_dataout : in_datain)
+
+/* The ESP100 when in synchronous data phase, can mistake a long final
+ * REQ pulse from the target as an extra byte, it places whatever is on
+ * the data lines into the fifo. For now, we will assume when this
+ * happens that the target is a bit quirky and we don't want to
+ * be talking synchronously to it anyways. Regardless, we need to
+ * tell the ESP to eat the extraneous byte so that we can proceed
+ * to the next phase.
+ */
+static int esp100_sync_hwbug(struct esp *esp, struct scsi_cmnd *sp, int fifocnt)
+{
+ /* Do not touch this piece of code. */
+ if ((!(esp->erev == esp100)) ||
+ (!(sreg_datainp((esp->sreg = sbus_readb(esp->eregs + ESP_STATUS))) &&
+ !fifocnt) &&
+ !(sreg_dataoutp(esp->sreg) && !fnzero(esp)))) {
+ if (sp->SCp.phase == in_dataout)
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ return 0;
+ } else {
+ /* Async mode for this guy. */
+ build_sync_nego_msg(esp, 0, 0);
+
+ /* Ack the bogus byte, but set ATN first. */
+ esp_cmd(esp, ESP_CMD_SATN);
+ esp_cmd(esp, ESP_CMD_MOK);
+ return 1;
+ }
+}
+
+/* This closes the window during a selection with a reselect pending, because
+ * we use DMA for the selection process the FIFO should hold the correct
+ * contents if we get reselected during this process. So we just need to
+ * ack the possible illegal cmd interrupt pending on the esp100.
+ */
+static inline int esp100_reconnect_hwbug(struct esp *esp)
+{
+ u8 tmp;
+
+ if (esp->erev != esp100)
+ return 0;
+ tmp = sbus_readb(esp->eregs + ESP_INTRPT);
+ if (tmp & ESP_INTR_SR)
+ return 1;
+ return 0;
+}
+
+/* This verifies the BUSID bits during a reselection so that we know which
+ * target is talking to us.
+ */
+static inline int reconnect_target(struct esp *esp)
+{
+ int it, me = esp->scsi_id_mask, targ = 0;
+
+ if (2 != fcount(esp))
+ return -1;
+ if (esp->erev == fashme) {
+ /* HME does not latch it's own BUS ID bits during
+ * a reselection. Also the target number is given
+ * as an unsigned char, not as a sole bit number
+ * like the other ESP's do.
+ * Happy Meal indeed....
+ */
+ targ = esp->hme_fifo_workaround_buffer[0];
+ } else {
+ it = sbus_readb(esp->eregs + ESP_FDATA);
+ if (!(it & me))
+ return -1;
+ it &= ~me;
+ if (it & (it - 1))
+ return -1;
+ while (!(it & 1))
+ targ++, it >>= 1;
+ }
+ return targ;
+}
+
+/* This verifies the identify from the target so that we know which lun is
+ * being reconnected.
+ */
+static inline int reconnect_lun(struct esp *esp)
+{
+ int lun;
+
+ if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP)
+ return -1;
+ if (esp->erev == fashme)
+ lun = esp->hme_fifo_workaround_buffer[1];
+ else
+ lun = sbus_readb(esp->eregs + ESP_FDATA);
+
+ /* Yes, you read this correctly. We report lun of zero
+ * if we see parity error. ESP reports parity error for
+ * the lun byte, and this is the only way to hope to recover
+ * because the target is connected.
+ */
+ if (esp->sreg & ESP_STAT_PERR)
+ return 0;
+
+ /* Check for illegal bits being set in the lun. */
+ if ((lun & 0x40) || !(lun & 0x80))
+ return -1;
+
+ return lun & 7;
+}
+
+/* This puts the driver in a state where it can revitalize a command that
+ * is being continued due to reselection.
+ */
+static inline void esp_connect(struct esp *esp, struct scsi_cmnd *sp)
+{
+ struct esp_device *esp_dev = sp->device->hostdata;
+
+ if (esp->prev_soff != esp_dev->sync_max_offset ||
+ esp->prev_stp != esp_dev->sync_min_period ||
+ (esp->erev > esp100a &&
+ esp->prev_cfg3 != esp->config3[sp->device->id])) {
+ esp->prev_soff = esp_dev->sync_max_offset;
+ esp->prev_stp = esp_dev->sync_min_period;
+ sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
+ sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
+ if (esp->erev > esp100a) {
+ esp->prev_cfg3 = esp->config3[sp->device->id];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ }
+ }
+ esp->current_SC = sp;
+}
+
+/* This will place the current working command back into the issue queue
+ * if we are to receive a reselection amidst a selection attempt.
+ */
+static inline void esp_reconnect(struct esp *esp, struct scsi_cmnd *sp)
+{
+ if (!esp->disconnected_SC)
+ ESPLOG(("esp%d: Weird, being reselected but disconnected "
+ "command queue is empty.\n", esp->esp_id));
+ esp->snip = 0;
+ esp->current_SC = 0;
+ sp->SCp.phase = not_issued;
+ append_SC(&esp->issue_SC, sp);
+}
+
+/* Begin message in phase. */
+static int esp_do_msgin(struct esp *esp)
+{
+ /* Must be very careful with the fifo on the HME */
+ if ((esp->erev != fashme) ||
+ !(sbus_readb(esp->eregs + ESP_STATUS2) & ESP_STAT2_FEMPTY))
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ esp_maybe_nop(esp);
+ esp_cmd(esp, ESP_CMD_TI);
+ esp->msgin_len = 1;
+ esp->msgin_ctr = 0;
+ esp_advance_phase(esp->current_SC, in_msgindone);
+ return do_work_bus;
+}
+
+/* This uses various DMA csr fields and the fifo flags count value to
+ * determine how many bytes were successfully sent/received by the ESP.
+ */
+static inline int esp_bytes_sent(struct esp *esp, int fifo_count)
+{
+ int rval = sbus_readl(esp->dregs + DMA_ADDR) - esp->esp_command_dvma;
+
+ if (esp->dma->revision == dvmarev1)
+ rval -= (4 - ((sbus_readl(esp->dregs + DMA_CSR) & DMA_READ_AHEAD)>>11));
+ return rval - fifo_count;
+}
+
+static inline void advance_sg(struct scsi_cmnd *sp)
+{
+ ++sp->SCp.buffer;
+ --sp->SCp.buffers_residual;
+ sp->SCp.this_residual = sg_dma_len(sp->SCp.buffer);
+ sp->SCp.ptr = (char *)((unsigned long)sg_dma_address(sp->SCp.buffer));
+}
+
+/* Please note that the way I've coded these routines is that I _always_
+ * check for a disconnect during any and all information transfer
+ * phases. The SCSI standard states that the target _can_ cause a BUS
+ * FREE condition by dropping all MSG/CD/IO/BSY signals. Also note
+ * that during information transfer phases the target controls every
+ * change in phase, the only thing the initiator can do is "ask" for
+ * a message out phase by driving ATN true. The target can, and sometimes
+ * will, completely ignore this request so we cannot assume anything when
+ * we try to force a message out phase to abort/reset a target. Most of
+ * the time the target will eventually be nice and go to message out, so
+ * we may have to hold on to our state about what we want to tell the target
+ * for some period of time.
+ */
+
+/* I think I have things working here correctly. Even partial transfers
+ * within a buffer or sub-buffer should not upset us at all no matter
+ * how bad the target and/or ESP fucks things up.
+ */
+static int esp_do_data(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ int thisphase, hmuch;
+
+ ESPDATA(("esp_do_data: "));
+ esp_maybe_nop(esp);
+ thisphase = sreg_to_dataphase(esp->sreg);
+ esp_advance_phase(SCptr, thisphase);
+ ESPDATA(("newphase<%s> ", (thisphase == in_datain) ? "DATAIN" : "DATAOUT"));
+ hmuch = dma_can_transfer(esp, SCptr);
+ if (hmuch > (64 * 1024) && (esp->erev != fashme))
+ hmuch = (64 * 1024);
+ ESPDATA(("hmuch<%d> ", hmuch));
+ esp->current_transfer_size = hmuch;
+
+ if (esp->erev == fashme) {
+ u32 tmp = esp->prev_hme_dmacsr;
+
+ /* Always set the ESP count registers first. */
+ esp_setcount(esp->eregs, hmuch, 1);
+
+ /* Get the DMA csr computed. */
+ tmp |= (DMA_SCSI_DISAB | DMA_ENABLE);
+ if (thisphase == in_datain)
+ tmp |= DMA_ST_WRITE;
+ else
+ tmp &= ~(DMA_ST_WRITE);
+ esp->prev_hme_dmacsr = tmp;
+
+ ESPDATA(("DMA|TI --> do_intr_end\n"));
+ if (thisphase == in_datain) {
+ sbus_writel(hmuch, esp->dregs + DMA_COUNT);
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ } else {
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ sbus_writel(hmuch, esp->dregs + DMA_COUNT);
+ }
+ sbus_writel((__u32)((unsigned long)SCptr->SCp.ptr), esp->dregs+DMA_ADDR);
+ sbus_writel(esp->prev_hme_dmacsr, esp->dregs + DMA_CSR);
+ } else {
+ esp_setcount(esp->eregs, hmuch, 0);
+ dma_setup(esp, ((__u32)((unsigned long)SCptr->SCp.ptr)),
+ hmuch, (thisphase == in_datain));
+ ESPDATA(("DMA|TI --> do_intr_end\n"));
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ }
+ return do_intr_end;
+}
+
+/* See how successful the data transfer was. */
+static int esp_do_data_finale(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ struct esp_device *esp_dev = SCptr->device->hostdata;
+ int bogus_data = 0, bytes_sent = 0, fifocnt, ecount = 0;
+
+ ESPDATA(("esp_do_data_finale: "));
+
+ if (SCptr->SCp.phase == in_datain) {
+ if (esp->sreg & ESP_STAT_PERR) {
+ /* Yuck, parity error. The ESP asserts ATN
+ * so that we can go to message out phase
+ * immediately and inform the target that
+ * something bad happened.
+ */
+ ESPLOG(("esp%d: data bad parity detected.\n",
+ esp->esp_id));
+ esp->cur_msgout[0] = INITIATOR_ERROR;
+ esp->msgout_len = 1;
+ }
+ dma_drain(esp);
+ }
+ dma_invalidate(esp);
+
+ /* This could happen for the above parity error case. */
+ if (esp->ireg != ESP_INTR_BSERV) {
+ /* Please go to msgout phase, please please please... */
+ ESPLOG(("esp%d: !BSERV after data, probably to msgout\n",
+ esp->esp_id));
+ return esp_do_phase_determine(esp);
+ }
+
+ /* Check for partial transfers and other horrible events.
+ * Note, here we read the real fifo flags register even
+ * on HME broken adapters because we skip the HME fifo
+ * workaround code in esp_handle() if we are doing data
+ * phase things. We don't want to fuck directly with
+ * the fifo like that, especially if doing synchronous
+ * transfers! Also, will need to double the count on
+ * HME if we are doing wide transfers, as the HME fifo
+ * will move and count 16-bit quantities during wide data.
+ * SMCC _and_ Qlogic can both bite me.
+ */
+ fifocnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES);
+ if (esp->erev != fashme)
+ ecount = esp_getcount(esp->eregs, 0);
+ bytes_sent = esp->current_transfer_size;
+
+ ESPDATA(("trans_sz(%d), ", bytes_sent));
+ if (esp->erev == fashme) {
+ if (!(esp->sreg & ESP_STAT_TCNT)) {
+ ecount = esp_getcount(esp->eregs, 1);
+ bytes_sent -= ecount;
+ }
+
+ /* Always subtract any cruft remaining in the FIFO. */
+ if (esp->prev_cfg3 & ESP_CONFIG3_EWIDE)
+ fifocnt <<= 1;
+ if (SCptr->SCp.phase == in_dataout)
+ bytes_sent -= fifocnt;
+
+ /* I have an IBM disk which exhibits the following
+ * behavior during writes to it. It disconnects in
+ * the middle of a partial transfer, the current sglist
+ * buffer is 1024 bytes, the disk stops data transfer
+ * at 512 bytes.
+ *
+ * However the FAS366 reports that 32 more bytes were
+ * transferred than really were. This is precisely
+ * the size of a fully loaded FIFO in wide scsi mode.
+ * The FIFO state recorded indicates that it is empty.
+ *
+ * I have no idea if this is a bug in the FAS366 chip
+ * or a bug in the firmware on this IBM disk. In any
+ * event the following seems to be a good workaround. -DaveM
+ */
+ if (bytes_sent != esp->current_transfer_size &&
+ SCptr->SCp.phase == in_dataout) {
+ int mask = (64 - 1);
+
+ if ((esp->prev_cfg3 & ESP_CONFIG3_EWIDE) == 0)
+ mask >>= 1;
+
+ if (bytes_sent & mask)
+ bytes_sent -= (bytes_sent & mask);
+ }
+ } else {
+ if (!(esp->sreg & ESP_STAT_TCNT))
+ bytes_sent -= ecount;
+ if (SCptr->SCp.phase == in_dataout)
+ bytes_sent -= fifocnt;
+ }
+
+ ESPDATA(("bytes_sent(%d), ", bytes_sent));
+
+ /* If we were in synchronous mode, check for peculiarities. */
+ if (esp->erev == fashme) {
+ if (esp_dev->sync_max_offset) {
+ if (SCptr->SCp.phase == in_dataout)
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ } else {
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ }
+ } else {
+ if (esp_dev->sync_max_offset)
+ bogus_data = esp100_sync_hwbug(esp, SCptr, fifocnt);
+ else
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ }
+
+ /* Until we are sure of what has happened, we are certainly
+ * in the dark.
+ */
+ esp_advance_phase(SCptr, in_the_dark);
+
+ if (bytes_sent < 0) {
+ /* I've seen this happen due to lost state in this
+ * driver. No idea why it happened, but allowing
+ * this value to be negative caused things to
+ * lock up. This allows greater chance of recovery.
+ * In fact every time I've seen this, it has been
+ * a driver bug without question.
+ */
+ ESPLOG(("esp%d: yieee, bytes_sent < 0!\n", esp->esp_id));
+ ESPLOG(("esp%d: csz=%d fifocount=%d ecount=%d\n",
+ esp->esp_id,
+ esp->current_transfer_size, fifocnt, ecount));
+ ESPLOG(("esp%d: use_sg=%d ptr=%p this_residual=%d\n",
+ esp->esp_id,
+ SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual));
+ ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id,
+ SCptr->device->id));
+ SCptr->device->borken = 1;
+ esp_dev->sync = 0;
+ bytes_sent = 0;
+ }
+
+ /* Update the state of our transfer. */
+ SCptr->SCp.ptr += bytes_sent;
+ SCptr->SCp.this_residual -= bytes_sent;
+ if (SCptr->SCp.this_residual < 0) {
+ /* shit */
+ ESPLOG(("esp%d: Data transfer overrun.\n", esp->esp_id));
+ SCptr->SCp.this_residual = 0;
+ }
+
+ /* Maybe continue. */
+ if (!bogus_data) {
+ ESPDATA(("!bogus_data, "));
+
+ /* NO MATTER WHAT, we advance the scatterlist,
+ * if the target should decide to disconnect
+ * in between scatter chunks (which is common)
+ * we could die horribly! I used to have the sg
+ * advance occur only if we are going back into
+ * (or are staying in) a data phase, you can
+ * imagine the hell I went through trying to
+ * figure this out.
+ */
+ if (SCptr->use_sg && !SCptr->SCp.this_residual)
+ advance_sg(SCptr);
+ if (sreg_datainp(esp->sreg) || sreg_dataoutp(esp->sreg)) {
+ ESPDATA(("to more data\n"));
+ return esp_do_data(esp);
+ }
+ ESPDATA(("to new phase\n"));
+ return esp_do_phase_determine(esp);
+ }
+ /* Bogus data, just wait for next interrupt. */
+ ESPLOG(("esp%d: bogus_data during end of data phase\n",
+ esp->esp_id));
+ return do_intr_end;
+}
+
+/* We received a non-good status return at the end of
+ * running a SCSI command. This is used to decide if
+ * we should clear our synchronous transfer state for
+ * such a device when that happens.
+ *
+ * The idea is that when spinning up a disk or rewinding
+ * a tape, we don't want to go into a loop re-negotiating
+ * synchronous capabilities over and over.
+ */
+static int esp_should_clear_sync(struct scsi_cmnd *sp)
+{
+ u8 cmd1 = sp->cmnd[0];
+ u8 cmd2 = sp->data_cmnd[0];
+
+ /* These cases are for spinning up a disk and
+ * waiting for that spinup to complete.
+ */
+ if (cmd1 == START_STOP ||
+ cmd2 == START_STOP)
+ return 0;
+
+ if (cmd1 == TEST_UNIT_READY ||
+ cmd2 == TEST_UNIT_READY)
+ return 0;
+
+ /* One more special case for SCSI tape drives,
+ * this is what is used to probe the device for
+ * completion of a rewind or tape load operation.
+ */
+ if (sp->device->type == TYPE_TAPE) {
+ if (cmd1 == MODE_SENSE ||
+ cmd2 == MODE_SENSE)
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Either a command is completing or a target is dropping off the bus
+ * to continue the command in the background so we can do other work.
+ */
+static int esp_do_freebus(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ struct esp_device *esp_dev = SCptr->device->hostdata;
+ int rval;
+
+ rval = skipahead2(esp, SCptr, in_status, in_msgindone, in_freeing);
+ if (rval)
+ return rval;
+ if (esp->ireg != ESP_INTR_DC) {
+ ESPLOG(("esp%d: Target will not disconnect\n", esp->esp_id));
+ return do_reset_bus; /* target will not drop BSY... */
+ }
+ esp->msgout_len = 0;
+ esp->prevmsgout = NOP;
+ if (esp->prevmsgin == COMMAND_COMPLETE) {
+ /* Normal end of nexus. */
+ if (esp->disconnected_SC || (esp->erev == fashme))
+ esp_cmd(esp, ESP_CMD_ESEL);
+
+ if (SCptr->SCp.Status != GOOD &&
+ SCptr->SCp.Status != CONDITION_GOOD &&
+ ((1<<SCptr->device->id) & esp->targets_present) &&
+ esp_dev->sync &&
+ esp_dev->sync_max_offset) {
+ /* SCSI standard says that the synchronous capabilities
+ * should be renegotiated at this point. Most likely
+ * we are about to request sense from this target
+ * in which case we want to avoid using sync
+ * transfers until we are sure of the current target
+ * state.
+ */
+ ESPMISC(("esp: Status <%d> for target %d lun %d\n",
+ SCptr->SCp.Status, SCptr->device->id, SCptr->device->lun));
+
+ /* But don't do this when spinning up a disk at
+ * boot time while we poll for completion as it
+ * fills up the console with messages. Also, tapes
+ * can report not ready many times right after
+ * loading up a tape.
+ */
+ if (esp_should_clear_sync(SCptr) != 0)
+ esp_dev->sync = 0;
+ }
+ ESPDISC(("F<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
+ esp_done(esp, ((SCptr->SCp.Status & 0xff) |
+ ((SCptr->SCp.Message & 0xff)<<8) |
+ (DID_OK << 16)));
+ } else if (esp->prevmsgin == DISCONNECT) {
+ /* Normal disconnect. */
+ esp_cmd(esp, ESP_CMD_ESEL);
+ ESPDISC(("D<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
+ append_SC(&esp->disconnected_SC, SCptr);
+ esp->current_SC = NULL;
+ if (esp->issue_SC)
+ esp_exec_cmd(esp);
+ } else {
+ /* Driver bug, we do not expect a disconnect here
+ * and should not have advanced the state engine
+ * to in_freeing.
+ */
+ ESPLOG(("esp%d: last msg not disc and not cmd cmplt.\n",
+ esp->esp_id));
+ return do_reset_bus;
+ }
+ return do_intr_end;
+}
+
+/* When a reselect occurs, and we cannot find the command to
+ * reconnect to in our queues, we do this.
+ */
+static int esp_bad_reconnect(struct esp *esp)
+{
+ struct scsi_cmnd *sp;
+
+ ESPLOG(("esp%d: Eieeee, reconnecting unknown command!\n",
+ esp->esp_id));
+ ESPLOG(("QUEUE DUMP\n"));
+ sp = esp->issue_SC;
+ ESPLOG(("esp%d: issue_SC[", esp->esp_id));
+ while (sp) {
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
+ sp = (struct scsi_cmnd *) sp->host_scribble;
+ }
+ ESPLOG(("]\n"));
+ sp = esp->current_SC;
+ ESPLOG(("esp%d: current_SC[", esp->esp_id));
+ if (sp)
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
+ else
+ ESPLOG(("<NULL>"));
+ ESPLOG(("]\n"));
+ sp = esp->disconnected_SC;
+ ESPLOG(("esp%d: disconnected_SC[", esp->esp_id));
+ while (sp) {
+ ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
+ sp = (struct scsi_cmnd *) sp->host_scribble;
+ }
+ ESPLOG(("]\n"));
+ return do_reset_bus;
+}
+
+/* Do the needy when a target tries to reconnect to us. */
+static int esp_do_reconnect(struct esp *esp)
+{
+ int lun, target;
+ struct scsi_cmnd *SCptr;
+
+ /* Check for all bogus conditions first. */
+ target = reconnect_target(esp);
+ if (target < 0) {
+ ESPDISC(("bad bus bits\n"));
+ return do_reset_bus;
+ }
+ lun = reconnect_lun(esp);
+ if (lun < 0) {
+ ESPDISC(("target=%2x, bad identify msg\n", target));
+ return do_reset_bus;
+ }
+
+ /* Things look ok... */
+ ESPDISC(("R<%02x,%02x>", target, lun));
+
+ /* Must not flush FIFO or DVMA on HME. */
+ if (esp->erev != fashme) {
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ if (esp100_reconnect_hwbug(esp))
+ return do_reset_bus;
+ esp_cmd(esp, ESP_CMD_NULL);
+ }
+
+ SCptr = remove_SC(&esp->disconnected_SC, (u8) target, (u8) lun);
+ if (!SCptr)
+ return esp_bad_reconnect(esp);
+
+ esp_connect(esp, SCptr);
+ esp_cmd(esp, ESP_CMD_MOK);
+
+ if (esp->erev == fashme)
+ sbus_writeb(((SCptr->device->id & 0xf) |
+ (ESP_BUSID_RESELID | ESP_BUSID_CTR32BIT)),
+ esp->eregs + ESP_BUSID);
+
+ /* Reconnect implies a restore pointers operation. */
+ esp_restore_pointers(esp, SCptr);
+
+ esp->snip = 0;
+ esp_advance_phase(SCptr, in_the_dark);
+ return do_intr_end;
+}
+
+/* End of NEXUS (hopefully), pick up status + message byte then leave if
+ * all goes well.
+ */
+static int esp_do_status(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ int intr, rval;
+
+ rval = skipahead1(esp, SCptr, in_the_dark, in_status);
+ if (rval)
+ return rval;
+ intr = esp->ireg;
+ ESPSTAT(("esp_do_status: "));
+ if (intr != ESP_INTR_DC) {
+ int message_out = 0; /* for parity problems */
+
+ /* Ack the message. */
+ ESPSTAT(("ack msg, "));
+ esp_cmd(esp, ESP_CMD_MOK);
+
+ if (esp->erev != fashme) {
+ dma_flashclear(esp);
+
+ /* Wait till the first bits settle. */
+ while (esp->esp_command[0] == 0xff)
+ udelay(1);
+ } else {
+ esp->esp_command[0] = esp->hme_fifo_workaround_buffer[0];
+ esp->esp_command[1] = esp->hme_fifo_workaround_buffer[1];
+ }
+
+ ESPSTAT(("got something, "));
+ /* ESP chimes in with one of
+ *
+ * 1) function done interrupt:
+ * both status and message in bytes
+ * are available
+ *
+ * 2) bus service interrupt:
+ * only status byte was acquired
+ *
+ * 3) Anything else:
+ * can't happen, but we test for it
+ * anyways
+ *
+ * ALSO: If bad parity was detected on either
+ * the status _or_ the message byte then
+ * the ESP has asserted ATN on the bus
+ * and we must therefore wait for the
+ * next phase change.
+ */
+ if (intr & ESP_INTR_FDONE) {
+ /* We got it all, hallejulia. */
+ ESPSTAT(("got both, "));
+ SCptr->SCp.Status = esp->esp_command[0];
+ SCptr->SCp.Message = esp->esp_command[1];
+ esp->prevmsgin = SCptr->SCp.Message;
+ esp->cur_msgin[0] = SCptr->SCp.Message;
+ if (esp->sreg & ESP_STAT_PERR) {
+ /* There was bad parity for the
+ * message byte, the status byte
+ * was ok.
+ */
+ message_out = MSG_PARITY_ERROR;
+ }
+ } else if (intr == ESP_INTR_BSERV) {
+ /* Only got status byte. */
+ ESPLOG(("esp%d: got status only, ", esp->esp_id));
+ if (!(esp->sreg & ESP_STAT_PERR)) {
+ SCptr->SCp.Status = esp->esp_command[0];
+ SCptr->SCp.Message = 0xff;
+ } else {
+ /* The status byte had bad parity.
+ * we leave the scsi_pointer Status
+ * field alone as we set it to a default
+ * of CHECK_CONDITION in esp_queue.
+ */
+ message_out = INITIATOR_ERROR;
+ }
+ } else {
+ /* This shouldn't happen ever. */
+ ESPSTAT(("got bolixed\n"));
+ esp_advance_phase(SCptr, in_the_dark);
+ return esp_do_phase_determine(esp);
+ }
+
+ if (!message_out) {
+ ESPSTAT(("status=%2x msg=%2x, ", SCptr->SCp.Status,
+ SCptr->SCp.Message));
+ if (SCptr->SCp.Message == COMMAND_COMPLETE) {
+ ESPSTAT(("and was COMMAND_COMPLETE\n"));
+ esp_advance_phase(SCptr, in_freeing);
+ return esp_do_freebus(esp);
+ } else {
+ ESPLOG(("esp%d: and _not_ COMMAND_COMPLETE\n",
+ esp->esp_id));
+ esp->msgin_len = esp->msgin_ctr = 1;
+ esp_advance_phase(SCptr, in_msgindone);
+ return esp_do_msgindone(esp);
+ }
+ } else {
+ /* With luck we'll be able to let the target
+ * know that bad parity happened, it will know
+ * which byte caused the problems and send it
+ * again. For the case where the status byte
+ * receives bad parity, I do not believe most
+ * targets recover very well. We'll see.
+ */
+ ESPLOG(("esp%d: bad parity somewhere mout=%2x\n",
+ esp->esp_id, message_out));
+ esp->cur_msgout[0] = message_out;
+ esp->msgout_len = esp->msgout_ctr = 1;
+ esp_advance_phase(SCptr, in_the_dark);
+ return esp_do_phase_determine(esp);
+ }
+ } else {
+ /* If we disconnect now, all hell breaks loose. */
+ ESPLOG(("esp%d: whoops, disconnect\n", esp->esp_id));
+ esp_advance_phase(SCptr, in_the_dark);
+ return esp_do_phase_determine(esp);
+ }
+}
+
+static int esp_enter_status(struct esp *esp)
+{
+ u8 thecmd = ESP_CMD_ICCSEQ;
+
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ if (esp->erev != fashme) {
+ u32 tmp;
+
+ esp->esp_command[0] = esp->esp_command[1] = 0xff;
+ sbus_writeb(2, esp->eregs + ESP_TCLOW);
+ sbus_writeb(0, esp->eregs + ESP_TCMED);
+ tmp = sbus_readl(esp->dregs + DMA_CSR);
+ tmp |= (DMA_ST_WRITE | DMA_ENABLE);
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ if (esp->dma->revision == dvmaesc1)
+ sbus_writel(0x100, esp->dregs + DMA_COUNT);
+ sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
+ thecmd |= ESP_CMD_DMA;
+ }
+ esp_cmd(esp, thecmd);
+ esp_advance_phase(esp->current_SC, in_status);
+
+ return esp_do_status(esp);
+}
+
+static int esp_disconnect_amidst_phases(struct esp *esp)
+{
+ struct scsi_cmnd *sp = esp->current_SC;
+ struct esp_device *esp_dev = sp->device->hostdata;
+
+ /* This means real problems if we see this
+ * here. Unless we were actually trying
+ * to force the device to abort/reset.
+ */
+ ESPLOG(("esp%d Disconnect amidst phases, ", esp->esp_id));
+ ESPLOG(("pphase<%s> cphase<%s>, ",
+ phase_string(sp->SCp.phase),
+ phase_string(sp->SCp.sent_command)));
+
+ if (esp->disconnected_SC != NULL || (esp->erev == fashme))
+ esp_cmd(esp, ESP_CMD_ESEL);
+
+ switch (esp->cur_msgout[0]) {
+ default:
+ /* We didn't expect this to happen at all. */
+ ESPLOG(("device is bolixed\n"));
+ esp_advance_phase(sp, in_tgterror);
+ esp_done(esp, (DID_ERROR << 16));
+ break;
+
+ case BUS_DEVICE_RESET:
+ ESPLOG(("device reset successful\n"));
+ esp_dev->sync_max_offset = 0;
+ esp_dev->sync_min_period = 0;
+ esp_dev->sync = 0;
+ esp_advance_phase(sp, in_resetdev);
+ esp_done(esp, (DID_RESET << 16));
+ break;
+
+ case ABORT:
+ ESPLOG(("device abort successful\n"));
+ esp_advance_phase(sp, in_abortone);
+ esp_done(esp, (DID_ABORT << 16));
+ break;
+
+ };
+ return do_intr_end;
+}
+
+static int esp_enter_msgout(struct esp *esp)
+{
+ esp_advance_phase(esp->current_SC, in_msgout);
+ return esp_do_msgout(esp);
+}
+
+static int esp_enter_msgin(struct esp *esp)
+{
+ esp_advance_phase(esp->current_SC, in_msgin);
+ return esp_do_msgin(esp);
+}
+
+static int esp_enter_cmd(struct esp *esp)
+{
+ esp_advance_phase(esp->current_SC, in_cmdbegin);
+ return esp_do_cmdbegin(esp);
+}
+
+static int esp_enter_badphase(struct esp *esp)
+{
+ ESPLOG(("esp%d: Bizarre bus phase %2x.\n", esp->esp_id,
+ esp->sreg & ESP_STAT_PMASK));
+ return do_reset_bus;
+}
+
+typedef int (*espfunc_t)(struct esp *);
+
+static espfunc_t phase_vector[] = {
+ esp_do_data, /* ESP_DOP */
+ esp_do_data, /* ESP_DIP */
+ esp_enter_cmd, /* ESP_CMDP */
+ esp_enter_status, /* ESP_STATP */
+ esp_enter_badphase, /* ESP_STAT_PMSG */
+ esp_enter_badphase, /* ESP_STAT_PMSG | ESP_STAT_PIO */
+ esp_enter_msgout, /* ESP_MOP */
+ esp_enter_msgin, /* ESP_MIP */
+};
+
+/* The target has control of the bus and we have to see where it has
+ * taken us.
+ */
+static int esp_do_phase_determine(struct esp *esp)
+{
+ if ((esp->ireg & ESP_INTR_DC) != 0)
+ return esp_disconnect_amidst_phases(esp);
+ return phase_vector[esp->sreg & ESP_STAT_PMASK](esp);
+}
+
+/* First interrupt after exec'ing a cmd comes here. */
+static int esp_select_complete(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ struct esp_device *esp_dev = SCptr->device->hostdata;
+ int cmd_bytes_sent, fcnt;
+
+ if (esp->erev != fashme)
+ esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS);
+
+ if (esp->erev == fashme)
+ fcnt = esp->hme_fifo_workaround_count;
+ else
+ fcnt = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES);
+
+ cmd_bytes_sent = esp_bytes_sent(esp, fcnt);
+ dma_invalidate(esp);
+
+ /* Let's check to see if a reselect happened
+ * while we we're trying to select. This must
+ * be checked first.
+ */
+ if (esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) {
+ esp_reconnect(esp, SCptr);
+ return esp_do_reconnect(esp);
+ }
+
+ /* Looks like things worked, we should see a bus service &
+ * a function complete interrupt at this point. Note we
+ * are doing a direct comparison because we don't want to
+ * be fooled into thinking selection was successful if
+ * ESP_INTR_DC is set, see below.
+ */
+ if (esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) {
+ /* target speaks... */
+ esp->targets_present |= (1<<SCptr->device->id);
+
+ /* What if the target ignores the sdtr? */
+ if (esp->snip)
+ esp_dev->sync = 1;
+
+ /* See how far, if at all, we got in getting
+ * the information out to the target.
+ */
+ switch (esp->seqreg) {
+ default:
+
+ case ESP_STEP_ASEL:
+ /* Arbitration won, target selected, but
+ * we are in some phase which is not command
+ * phase nor is it message out phase.
+ *
+ * XXX We've confused the target, obviously.
+ * XXX So clear it's state, but we also end
+ * XXX up clearing everyone elses. That isn't
+ * XXX so nice. I'd like to just reset this
+ * XXX target, but if I cannot even get it's
+ * XXX attention and finish selection to talk
+ * XXX to it, there is not much more I can do.
+ * XXX If we have a loaded bus we're going to
+ * XXX spend the next second or so renegotiating
+ * XXX for synchronous transfers.
+ */
+ ESPLOG(("esp%d: STEP_ASEL for tgt %d\n",
+ esp->esp_id, SCptr->device->id));
+
+ case ESP_STEP_SID:
+ /* Arbitration won, target selected, went
+ * to message out phase, sent one message
+ * byte, then we stopped. ATN is asserted
+ * on the SCSI bus and the target is still
+ * there hanging on. This is a legal
+ * sequence step if we gave the ESP a select
+ * and stop command.
+ *
+ * XXX See above, I could set the borken flag
+ * XXX in the device struct and retry the
+ * XXX command. But would that help for
+ * XXX tagged capable targets?
+ */
+
+ case ESP_STEP_NCMD:
+ /* Arbitration won, target selected, maybe
+ * sent the one message byte in message out
+ * phase, but we did not go to command phase
+ * in the end. Actually, we could have sent
+ * only some of the message bytes if we tried
+ * to send out the entire identify and tag
+ * message using ESP_CMD_SA3.
+ */
+ cmd_bytes_sent = 0;
+ break;
+
+ case ESP_STEP_PPC:
+ /* No, not the powerPC pinhead. Arbitration
+ * won, all message bytes sent if we went to
+ * message out phase, went to command phase
+ * but only part of the command was sent.
+ *
+ * XXX I've seen this, but usually in conjunction
+ * XXX with a gross error which appears to have
+ * XXX occurred between the time I told the
+ * XXX ESP to arbitrate and when I got the
+ * XXX interrupt. Could I have misloaded the
+ * XXX command bytes into the fifo? Actually,
+ * XXX I most likely missed a phase, and therefore
+ * XXX went into never never land and didn't even
+ * XXX know it. That was the old driver though.
+ * XXX What is even more peculiar is that the ESP
+ * XXX showed the proper function complete and
+ * XXX bus service bits in the interrupt register.
+ */
+
+ case ESP_STEP_FINI4:
+ case ESP_STEP_FINI5:
+ case ESP_STEP_FINI6:
+ case ESP_STEP_FINI7:
+ /* Account for the identify message */
+ if (SCptr->SCp.phase == in_slct_norm)
+ cmd_bytes_sent -= 1;
+ };
+
+ if (esp->erev != fashme)
+ esp_cmd(esp, ESP_CMD_NULL);
+
+ /* Be careful, we could really get fucked during synchronous
+ * data transfers if we try to flush the fifo now.
+ */
+ if ((esp->erev != fashme) && /* not a Happy Meal and... */
+ !fcnt && /* Fifo is empty and... */
+ /* either we are not doing synchronous transfers or... */
+ (!esp_dev->sync_max_offset ||
+ /* We are not going into data in phase. */
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP)))
+ esp_cmd(esp, ESP_CMD_FLUSH); /* flush is safe */
+
+ /* See how far we got if this is not a slow command. */
+ if (!esp->esp_slowcmd) {
+ if (cmd_bytes_sent < 0)
+ cmd_bytes_sent = 0;
+ if (cmd_bytes_sent != SCptr->cmd_len) {
+ /* Crapola, mark it as a slowcmd
+ * so that we have some chance of
+ * keeping the command alive with
+ * good luck.
+ *
+ * XXX Actually, if we didn't send it all
+ * XXX this means either we didn't set things
+ * XXX up properly (driver bug) or the target
+ * XXX or the ESP detected parity on one of
+ * XXX the command bytes. This makes much
+ * XXX more sense, and therefore this code
+ * XXX should be changed to send out a
+ * XXX parity error message or if the status
+ * XXX register shows no parity error then
+ * XXX just expect the target to bring the
+ * XXX bus into message in phase so that it
+ * XXX can send us the parity error message.
+ * XXX SCSI sucks...
+ */
+ esp->esp_slowcmd = 1;
+ esp->esp_scmdp = &(SCptr->cmnd[cmd_bytes_sent]);
+ esp->esp_scmdleft = (SCptr->cmd_len - cmd_bytes_sent);
+ }
+ }
+
+ /* Now figure out where we went. */
+ esp_advance_phase(SCptr, in_the_dark);
+ return esp_do_phase_determine(esp);
+ }
+
+ /* Did the target even make it? */
+ if (esp->ireg == ESP_INTR_DC) {
+ /* wheee... nobody there or they didn't like
+ * what we told it to do, clean up.
+ */
+
+ /* If anyone is off the bus, but working on
+ * a command in the background for us, tell
+ * the ESP to listen for them.
+ */
+ if (esp->disconnected_SC)
+ esp_cmd(esp, ESP_CMD_ESEL);
+
+ if (((1<<SCptr->device->id) & esp->targets_present) &&
+ esp->seqreg != 0 &&
+ (esp->cur_msgout[0] == EXTENDED_MESSAGE) &&
+ (SCptr->SCp.phase == in_slct_msg ||
+ SCptr->SCp.phase == in_slct_stop)) {
+ /* shit */
+ esp->snip = 0;
+ ESPLOG(("esp%d: Failed synchronous negotiation for target %d "
+ "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
+ esp_dev->sync_max_offset = 0;
+ esp_dev->sync_min_period = 0;
+ esp_dev->sync = 1; /* so we don't negotiate again */
+
+ /* Run the command again, this time though we
+ * won't try to negotiate for synchronous transfers.
+ *
+ * XXX I'd like to do something like send an
+ * XXX INITIATOR_ERROR or ABORT message to the
+ * XXX target to tell it, "Sorry I confused you,
+ * XXX please come back and I will be nicer next
+ * XXX time". But that requires having the target
+ * XXX on the bus, and it has dropped BSY on us.
+ */
+ esp->current_SC = NULL;
+ esp_advance_phase(SCptr, not_issued);
+ prepend_SC(&esp->issue_SC, SCptr);
+ esp_exec_cmd(esp);
+ return do_intr_end;
+ }
+
+ /* Ok, this is normal, this is what we see during boot
+ * or whenever when we are scanning the bus for targets.
+ * But first make sure that is really what is happening.
+ */
+ if (((1<<SCptr->device->id) & esp->targets_present)) {
+ ESPLOG(("esp%d: Warning, live target %d not responding to "
+ "selection.\n", esp->esp_id, SCptr->device->id));
+
+ /* This _CAN_ happen. The SCSI standard states that
+ * the target is to _not_ respond to selection if
+ * _it_ detects bad parity on the bus for any reason.
+ * Therefore, we assume that if we've talked successfully
+ * to this target before, bad parity is the problem.
+ */
+ esp_done(esp, (DID_PARITY << 16));
+ } else {
+ /* Else, there really isn't anyone there. */
+ ESPMISC(("esp: selection failure, maybe nobody there?\n"));
+ ESPMISC(("esp: target %d lun %d\n",
+ SCptr->device->id, SCptr->device->lun));
+ esp_done(esp, (DID_BAD_TARGET << 16));
+ }
+ return do_intr_end;
+ }
+
+ ESPLOG(("esp%d: Selection failure.\n", esp->esp_id));
+ printk("esp%d: Currently -- ", esp->esp_id);
+ esp_print_ireg(esp->ireg); printk(" ");
+ esp_print_statreg(esp->sreg); printk(" ");
+ esp_print_seqreg(esp->seqreg); printk("\n");
+ printk("esp%d: New -- ", esp->esp_id);
+ esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
+ esp->seqreg = sbus_readb(esp->eregs + ESP_SSTEP);
+ esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT);
+ esp_print_ireg(esp->ireg); printk(" ");
+ esp_print_statreg(esp->sreg); printk(" ");
+ esp_print_seqreg(esp->seqreg); printk("\n");
+ ESPLOG(("esp%d: resetting bus\n", esp->esp_id));
+ return do_reset_bus; /* ugh... */
+}
+
+/* Continue reading bytes for msgin phase. */
+static int esp_do_msgincont(struct esp *esp)
+{
+ if (esp->ireg & ESP_INTR_BSERV) {
+ /* in the right phase too? */
+ if ((esp->sreg & ESP_STAT_PMASK) == ESP_MIP) {
+ /* phew... */
+ esp_cmd(esp, ESP_CMD_TI);
+ esp_advance_phase(esp->current_SC, in_msgindone);
+ return do_intr_end;
+ }
+
+ /* We changed phase but ESP shows bus service,
+ * in this case it is most likely that we, the
+ * hacker who has been up for 20hrs straight
+ * staring at the screen, drowned in coffee
+ * smelling like retched cigarette ashes
+ * have miscoded something..... so, try to
+ * recover as best we can.
+ */
+ ESPLOG(("esp%d: message in mis-carriage.\n", esp->esp_id));
+ }
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ return do_phase_determine;
+}
+
+static int check_singlebyte_msg(struct esp *esp)
+{
+ esp->prevmsgin = esp->cur_msgin[0];
+ if (esp->cur_msgin[0] & 0x80) {
+ /* wheee... */
+ ESPLOG(("esp%d: target sends identify amidst phases\n",
+ esp->esp_id));
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ return 0;
+ } else if (((esp->cur_msgin[0] & 0xf0) == 0x20) ||
+ (esp->cur_msgin[0] == EXTENDED_MESSAGE)) {
+ esp->msgin_len = 2;
+ esp_advance_phase(esp->current_SC, in_msgincont);
+ return 0;
+ }
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ switch (esp->cur_msgin[0]) {
+ default:
+ /* We don't want to hear about it. */
+ ESPLOG(("esp%d: msg %02x which we don't know about\n", esp->esp_id,
+ esp->cur_msgin[0]));
+ return MESSAGE_REJECT;
+
+ case NOP:
+ ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id,
+ esp->current_SC->device->id));
+ return 0;
+
+ case RESTORE_POINTERS:
+ /* In this case we might also have to backup the
+ * "slow command" pointer. It is rare to get such
+ * a save/restore pointer sequence so early in the
+ * bus transition sequences, but cover it.
+ */
+ if (esp->esp_slowcmd) {
+ esp->esp_scmdleft = esp->current_SC->cmd_len;
+ esp->esp_scmdp = &esp->current_SC->cmnd[0];
+ }
+ esp_restore_pointers(esp, esp->current_SC);
+ return 0;
+
+ case SAVE_POINTERS:
+ esp_save_pointers(esp, esp->current_SC);
+ return 0;
+
+ case COMMAND_COMPLETE:
+ case DISCONNECT:
+ /* Freeing the bus, let it go. */
+ esp->current_SC->SCp.phase = in_freeing;
+ return 0;
+
+ case MESSAGE_REJECT:
+ ESPMISC(("msg reject, "));
+ if (esp->prevmsgout == EXTENDED_MESSAGE) {
+ struct esp_device *esp_dev = esp->current_SC->device->hostdata;
+
+ /* Doesn't look like this target can
+ * do synchronous or WIDE transfers.
+ */
+ ESPSDTR(("got reject, was trying nego, clearing sync/WIDE\n"));
+ esp_dev->sync = 1;
+ esp_dev->wide = 1;
+ esp_dev->sync_min_period = 0;
+ esp_dev->sync_max_offset = 0;
+ return 0;
+ } else {
+ ESPMISC(("not sync nego, sending ABORT\n"));
+ return ABORT;
+ }
+ };
+}
+
+/* Target negotiates for synchronous transfers before we do, this
+ * is legal although very strange. What is even funnier is that
+ * the SCSI2 standard specifically recommends against targets doing
+ * this because so many initiators cannot cope with this occurring.
+ */
+static int target_with_ants_in_pants(struct esp *esp,
+ struct scsi_cmnd *SCptr,
+ struct esp_device *esp_dev)
+{
+ if (esp_dev->sync || SCptr->device->borken) {
+ /* sorry, no can do */
+ ESPSDTR(("forcing to async, "));
+ build_sync_nego_msg(esp, 0, 0);
+ esp_dev->sync = 1;
+ esp->snip = 1;
+ ESPLOG(("esp%d: hoping for msgout\n", esp->esp_id));
+ esp_advance_phase(SCptr, in_the_dark);
+ return EXTENDED_MESSAGE;
+ }
+
+ /* Ok, we'll check them out... */
+ return 0;
+}
+
+static void sync_report(struct esp *esp)
+{
+ int msg3, msg4;
+ char *type;
+
+ msg3 = esp->cur_msgin[3];
+ msg4 = esp->cur_msgin[4];
+ if (msg4) {
+ int hz = 1000000000 / (msg3 * 4);
+ int integer = hz / 1000000;
+ int fraction = (hz - (integer * 1000000)) / 10000;
+ if ((esp->erev == fashme) &&
+ (esp->config3[esp->current_SC->device->id] & ESP_CONFIG3_EWIDE)) {
+ type = "FAST-WIDE";
+ integer <<= 1;
+ fraction <<= 1;
+ } else if ((msg3 * 4) < 200) {
+ type = "FAST";
+ } else {
+ type = "synchronous";
+ }
+
+ /* Do not transform this back into one big printk
+ * again, it triggers a bug in our sparc64-gcc272
+ * sibling call optimization. -DaveM
+ */
+ ESPLOG((KERN_INFO "esp%d: target %d ",
+ esp->esp_id, esp->current_SC->device->id));
+ ESPLOG(("[period %dns offset %d %d.%02dMHz ",
+ (int) msg3 * 4, (int) msg4,
+ integer, fraction));
+ ESPLOG(("%s SCSI%s]\n", type,
+ (((msg3 * 4) < 200) ? "-II" : "")));
+ } else {
+ ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n",
+ esp->esp_id, esp->current_SC->device->id));
+ }
+}
+
+static int check_multibyte_msg(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ struct esp_device *esp_dev = SCptr->device->hostdata;
+ u8 regval = 0;
+ int message_out = 0;
+
+ ESPSDTR(("chk multibyte msg: "));
+ if (esp->cur_msgin[2] == EXTENDED_SDTR) {
+ int period = esp->cur_msgin[3];
+ int offset = esp->cur_msgin[4];
+
+ ESPSDTR(("is sync nego response, "));
+ if (!esp->snip) {
+ int rval;
+
+ /* Target negotiates first! */
+ ESPSDTR(("target jumps the gun, "));
+ message_out = EXTENDED_MESSAGE; /* we must respond */
+ rval = target_with_ants_in_pants(esp, SCptr, esp_dev);
+ if (rval)
+ return rval;
+ }
+
+ ESPSDTR(("examining sdtr, "));
+
+ /* Offset cannot be larger than ESP fifo size. */
+ if (offset > 15) {
+ ESPSDTR(("offset too big %2x, ", offset));
+ offset = 15;
+ ESPSDTR(("sending back new offset\n"));
+ build_sync_nego_msg(esp, period, offset);
+ return EXTENDED_MESSAGE;
+ }
+
+ if (offset && period > esp->max_period) {
+ /* Yeee, async for this slow device. */
+ ESPSDTR(("period too long %2x, ", period));
+ build_sync_nego_msg(esp, 0, 0);
+ ESPSDTR(("hoping for msgout\n"));
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ return EXTENDED_MESSAGE;
+ } else if (offset && period < esp->min_period) {
+ ESPSDTR(("period too short %2x, ", period));
+ period = esp->min_period;
+ if (esp->erev > esp236)
+ regval = 4;
+ else
+ regval = 5;
+ } else if (offset) {
+ int tmp;
+
+ ESPSDTR(("period is ok, "));
+ tmp = esp->ccycle / 1000;
+ regval = (((period << 2) + tmp - 1) / tmp);
+ if (regval && ((esp->erev == fas100a ||
+ esp->erev == fas236 ||
+ esp->erev == fashme))) {
+ if (period >= 50)
+ regval--;
+ }
+ }
+
+ if (offset) {
+ u8 bit;
+
+ esp_dev->sync_min_period = (regval & 0x1f);
+ esp_dev->sync_max_offset = (offset | esp->radelay);
+ if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) {
+ if ((esp->erev == fas100a) || (esp->erev == fashme))
+ bit = ESP_CONFIG3_FAST;
+ else
+ bit = ESP_CONFIG3_FSCSI;
+ if (period < 50) {
+ /* On FAS366, if using fast-20 synchronous transfers
+ * we need to make sure the REQ/ACK assert/deassert
+ * control bits are clear.
+ */
+ if (esp->erev == fashme)
+ esp_dev->sync_max_offset &= ~esp->radelay;
+ esp->config3[SCptr->device->id] |= bit;
+ } else {
+ esp->config3[SCptr->device->id] &= ~bit;
+ }
+ esp->prev_cfg3 = esp->config3[SCptr->device->id];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ }
+ esp->prev_soff = esp_dev->sync_max_offset;
+ esp->prev_stp = esp_dev->sync_min_period;
+ sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
+ sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
+ ESPSDTR(("soff=%2x stp=%2x cfg3=%2x\n",
+ esp_dev->sync_max_offset,
+ esp_dev->sync_min_period,
+ esp->config3[SCptr->device->id]));
+
+ esp->snip = 0;
+ } else if (esp_dev->sync_max_offset) {
+ u8 bit;
+
+ /* back to async mode */
+ ESPSDTR(("unaccaptable sync nego, forcing async\n"));
+ esp_dev->sync_max_offset = 0;
+ esp_dev->sync_min_period = 0;
+ esp->prev_soff = 0;
+ esp->prev_stp = 0;
+ sbus_writeb(esp->prev_soff, esp->eregs + ESP_SOFF);
+ sbus_writeb(esp->prev_stp, esp->eregs + ESP_STP);
+ if (esp->erev == fas100a || esp->erev == fas236 || esp->erev == fashme) {
+ if ((esp->erev == fas100a) || (esp->erev == fashme))
+ bit = ESP_CONFIG3_FAST;
+ else
+ bit = ESP_CONFIG3_FSCSI;
+ esp->config3[SCptr->device->id] &= ~bit;
+ esp->prev_cfg3 = esp->config3[SCptr->device->id];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+ }
+ }
+
+ sync_report(esp);
+
+ ESPSDTR(("chk multibyte msg: sync is known, "));
+ esp_dev->sync = 1;
+
+ if (message_out) {
+ ESPLOG(("esp%d: sending sdtr back, hoping for msgout\n",
+ esp->esp_id));
+ build_sync_nego_msg(esp, period, offset);
+ esp_advance_phase(SCptr, in_the_dark);
+ return EXTENDED_MESSAGE;
+ }
+
+ ESPSDTR(("returning zero\n"));
+ esp_advance_phase(SCptr, in_the_dark); /* ...or else! */
+ return 0;
+ } else if (esp->cur_msgin[2] == EXTENDED_WDTR) {
+ int size = 8 << esp->cur_msgin[3];
+
+ esp->wnip = 0;
+ if (esp->erev != fashme) {
+ ESPLOG(("esp%d: AIEEE wide msg received and not HME.\n",
+ esp->esp_id));
+ message_out = MESSAGE_REJECT;
+ } else if (size > 16) {
+ ESPLOG(("esp%d: AIEEE wide transfer for %d size "
+ "not supported.\n", esp->esp_id, size));
+ message_out = MESSAGE_REJECT;
+ } else {
+ /* Things look good; let's see what we got. */
+ if (size == 16) {
+ /* Set config 3 register for this target. */
+ esp->config3[SCptr->device->id] |= ESP_CONFIG3_EWIDE;
+ } else {
+ /* Just make sure it was one byte sized. */
+ if (size != 8) {
+ ESPLOG(("esp%d: Aieee, wide nego of %d size.\n",
+ esp->esp_id, size));
+ message_out = MESSAGE_REJECT;
+ goto finish;
+ }
+ /* Pure paranoia. */
+ esp->config3[SCptr->device->id] &= ~(ESP_CONFIG3_EWIDE);
+ }
+ esp->prev_cfg3 = esp->config3[SCptr->device->id];
+ sbus_writeb(esp->prev_cfg3, esp->eregs + ESP_CFG3);
+
+ /* Regardless, next try for sync transfers. */
+ build_sync_nego_msg(esp, esp->sync_defp, 15);
+ esp_dev->sync = 1;
+ esp->snip = 1;
+ message_out = EXTENDED_MESSAGE;
+ }
+ } else if (esp->cur_msgin[2] == EXTENDED_MODIFY_DATA_POINTER) {
+ ESPLOG(("esp%d: rejecting modify data ptr msg\n", esp->esp_id));
+ message_out = MESSAGE_REJECT;
+ }
+finish:
+ esp_advance_phase(SCptr, in_the_dark);
+ return message_out;
+}
+
+static int esp_do_msgindone(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ int message_out = 0, it = 0, rval;
+
+ rval = skipahead1(esp, SCptr, in_msgin, in_msgindone);
+ if (rval)
+ return rval;
+ if (SCptr->SCp.sent_command != in_status) {
+ if (!(esp->ireg & ESP_INTR_DC)) {
+ if (esp->msgin_len && (esp->sreg & ESP_STAT_PERR)) {
+ message_out = MSG_PARITY_ERROR;
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ } else if (esp->erev != fashme &&
+ (it = (sbus_readb(esp->eregs + ESP_FFLAGS) & ESP_FF_FBYTES)) != 1) {
+ /* We certainly dropped the ball somewhere. */
+ message_out = INITIATOR_ERROR;
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ } else if (!esp->msgin_len) {
+ if (esp->erev == fashme)
+ it = esp->hme_fifo_workaround_buffer[0];
+ else
+ it = sbus_readb(esp->eregs + ESP_FDATA);
+ esp_advance_phase(SCptr, in_msgincont);
+ } else {
+ /* it is ok and we want it */
+ if (esp->erev == fashme)
+ it = esp->cur_msgin[esp->msgin_ctr] =
+ esp->hme_fifo_workaround_buffer[0];
+ else
+ it = esp->cur_msgin[esp->msgin_ctr] =
+ sbus_readb(esp->eregs + ESP_FDATA);
+ esp->msgin_ctr++;
+ }
+ } else {
+ esp_advance_phase(SCptr, in_the_dark);
+ return do_work_bus;
+ }
+ } else {
+ it = esp->cur_msgin[0];
+ }
+ if (!message_out && esp->msgin_len) {
+ if (esp->msgin_ctr < esp->msgin_len) {
+ esp_advance_phase(SCptr, in_msgincont);
+ } else if (esp->msgin_len == 1) {
+ message_out = check_singlebyte_msg(esp);
+ } else if (esp->msgin_len == 2) {
+ if (esp->cur_msgin[0] == EXTENDED_MESSAGE) {
+ if ((it + 2) >= 15) {
+ message_out = MESSAGE_REJECT;
+ } else {
+ esp->msgin_len = (it + 2);
+ esp_advance_phase(SCptr, in_msgincont);
+ }
+ } else {
+ message_out = MESSAGE_REJECT; /* foo on you */
+ }
+ } else {
+ message_out = check_multibyte_msg(esp);
+ }
+ }
+ if (message_out < 0) {
+ return -message_out;
+ } else if (message_out) {
+ if (((message_out != 1) &&
+ ((message_out < 0x20) || (message_out & 0x80))))
+ esp->msgout_len = 1;
+ esp->cur_msgout[0] = message_out;
+ esp_cmd(esp, ESP_CMD_SATN);
+ esp_advance_phase(SCptr, in_the_dark);
+ esp->msgin_len = 0;
+ }
+ esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
+ esp->sreg &= ~(ESP_STAT_INTR);
+ if ((esp->sreg & (ESP_STAT_PMSG|ESP_STAT_PCD)) == (ESP_STAT_PMSG|ESP_STAT_PCD))
+ esp_cmd(esp, ESP_CMD_MOK);
+ if ((SCptr->SCp.sent_command == in_msgindone) &&
+ (SCptr->SCp.phase == in_freeing))
+ return esp_do_freebus(esp);
+ return do_intr_end;
+}
+
+static int esp_do_cmdbegin(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+
+ esp_advance_phase(SCptr, in_cmdend);
+ if (esp->erev == fashme) {
+ u32 tmp = sbus_readl(esp->dregs + DMA_CSR);
+ int i;
+
+ for (i = 0; i < esp->esp_scmdleft; i++)
+ esp->esp_command[i] = *esp->esp_scmdp++;
+ esp->esp_scmdleft = 0;
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ esp_setcount(esp->eregs, i, 1);
+ esp_cmd(esp, (ESP_CMD_DMA | ESP_CMD_TI));
+ tmp |= (DMA_SCSI_DISAB | DMA_ENABLE);
+ tmp &= ~(DMA_ST_WRITE);
+ sbus_writel(i, esp->dregs + DMA_COUNT);
+ sbus_writel(esp->esp_command_dvma, esp->dregs + DMA_ADDR);
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ } else {
+ u8 tmp;
+
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ tmp = *esp->esp_scmdp++;
+ esp->esp_scmdleft--;
+ sbus_writeb(tmp, esp->eregs + ESP_FDATA);
+ esp_cmd(esp, ESP_CMD_TI);
+ }
+ return do_intr_end;
+}
+
+static int esp_do_cmddone(struct esp *esp)
+{
+ if (esp->erev == fashme)
+ dma_invalidate(esp);
+ else
+ esp_cmd(esp, ESP_CMD_NULL);
+
+ if (esp->ireg & ESP_INTR_BSERV) {
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ return esp_do_phase_determine(esp);
+ }
+
+ ESPLOG(("esp%d: in do_cmddone() but didn't get BSERV interrupt.\n",
+ esp->esp_id));
+ return do_reset_bus;
+}
+
+static int esp_do_msgout(struct esp *esp)
+{
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ switch (esp->msgout_len) {
+ case 1:
+ if (esp->erev == fashme)
+ hme_fifo_push(esp, &esp->cur_msgout[0], 1);
+ else
+ sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA);
+
+ esp_cmd(esp, ESP_CMD_TI);
+ break;
+
+ case 2:
+ esp->esp_command[0] = esp->cur_msgout[0];
+ esp->esp_command[1] = esp->cur_msgout[1];
+
+ if (esp->erev == fashme) {
+ hme_fifo_push(esp, &esp->cur_msgout[0], 2);
+ esp_cmd(esp, ESP_CMD_TI);
+ } else {
+ dma_setup(esp, esp->esp_command_dvma, 2, 0);
+ esp_setcount(esp->eregs, 2, 0);
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ }
+ break;
+
+ case 4:
+ esp->esp_command[0] = esp->cur_msgout[0];
+ esp->esp_command[1] = esp->cur_msgout[1];
+ esp->esp_command[2] = esp->cur_msgout[2];
+ esp->esp_command[3] = esp->cur_msgout[3];
+ esp->snip = 1;
+
+ if (esp->erev == fashme) {
+ hme_fifo_push(esp, &esp->cur_msgout[0], 4);
+ esp_cmd(esp, ESP_CMD_TI);
+ } else {
+ dma_setup(esp, esp->esp_command_dvma, 4, 0);
+ esp_setcount(esp->eregs, 4, 0);
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ }
+ break;
+
+ case 5:
+ esp->esp_command[0] = esp->cur_msgout[0];
+ esp->esp_command[1] = esp->cur_msgout[1];
+ esp->esp_command[2] = esp->cur_msgout[2];
+ esp->esp_command[3] = esp->cur_msgout[3];
+ esp->esp_command[4] = esp->cur_msgout[4];
+ esp->snip = 1;
+
+ if (esp->erev == fashme) {
+ hme_fifo_push(esp, &esp->cur_msgout[0], 5);
+ esp_cmd(esp, ESP_CMD_TI);
+ } else {
+ dma_setup(esp, esp->esp_command_dvma, 5, 0);
+ esp_setcount(esp->eregs, 5, 0);
+ esp_cmd(esp, ESP_CMD_DMA | ESP_CMD_TI);
+ }
+ break;
+
+ default:
+ /* whoops */
+ ESPMISC(("bogus msgout sending NOP\n"));
+ esp->cur_msgout[0] = NOP;
+
+ if (esp->erev == fashme) {
+ hme_fifo_push(esp, &esp->cur_msgout[0], 1);
+ } else {
+ sbus_writeb(esp->cur_msgout[0], esp->eregs + ESP_FDATA);
+ }
+
+ esp->msgout_len = 1;
+ esp_cmd(esp, ESP_CMD_TI);
+ break;
+ };
+
+ esp_advance_phase(esp->current_SC, in_msgoutdone);
+ return do_intr_end;
+}
+
+static int esp_do_msgoutdone(struct esp *esp)
+{
+ if (esp->msgout_len > 1) {
+ /* XXX HME/FAS ATN deassert workaround required,
+ * XXX no DMA flushing, only possible ESP_CMD_FLUSH
+ * XXX to kill the fifo.
+ */
+ if (esp->erev != fashme) {
+ u32 tmp;
+
+ while ((tmp = sbus_readl(esp->dregs + DMA_CSR)) & DMA_PEND_READ)
+ udelay(1);
+ tmp &= ~DMA_ENABLE;
+ sbus_writel(tmp, esp->dregs + DMA_CSR);
+ dma_invalidate(esp);
+ } else {
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ }
+ }
+ if (!(esp->ireg & ESP_INTR_DC)) {
+ if (esp->erev != fashme)
+ esp_cmd(esp, ESP_CMD_NULL);
+ switch (esp->sreg & ESP_STAT_PMASK) {
+ case ESP_MOP:
+ /* whoops, parity error */
+ ESPLOG(("esp%d: still in msgout, parity error assumed\n",
+ esp->esp_id));
+ if (esp->msgout_len > 1)
+ esp_cmd(esp, ESP_CMD_SATN);
+ esp_advance_phase(esp->current_SC, in_msgout);
+ return do_work_bus;
+
+ case ESP_DIP:
+ break;
+
+ default:
+ /* Happy Meal fifo is touchy... */
+ if ((esp->erev != fashme) &&
+ !fcount(esp) &&
+ !(((struct esp_device *)esp->current_SC->device->hostdata)->sync_max_offset))
+ esp_cmd(esp, ESP_CMD_FLUSH);
+ break;
+
+ };
+ } else {
+ ESPLOG(("esp%d: disconnect, resetting bus\n", esp->esp_id));
+ return do_reset_bus;
+ }
+
+ /* If we sent out a synchronous negotiation message, update
+ * our state.
+ */
+ if (esp->cur_msgout[2] == EXTENDED_MESSAGE &&
+ esp->cur_msgout[4] == EXTENDED_SDTR) {
+ esp->snip = 1; /* anal retentiveness... */
+ }
+
+ esp->prevmsgout = esp->cur_msgout[0];
+ esp->msgout_len = 0;
+ esp_advance_phase(esp->current_SC, in_the_dark);
+ return esp_do_phase_determine(esp);
+}
+
+static int esp_bus_unexpected(struct esp *esp)
+{
+ ESPLOG(("esp%d: command in weird state %2x\n",
+ esp->esp_id, esp->current_SC->SCp.phase));
+ return do_reset_bus;
+}
+
+static espfunc_t bus_vector[] = {
+ esp_do_data_finale,
+ esp_do_data_finale,
+ esp_bus_unexpected,
+ esp_do_msgin,
+ esp_do_msgincont,
+ esp_do_msgindone,
+ esp_do_msgout,
+ esp_do_msgoutdone,
+ esp_do_cmdbegin,
+ esp_do_cmddone,
+ esp_do_status,
+ esp_do_freebus,
+ esp_do_phase_determine,
+ esp_bus_unexpected,
+ esp_bus_unexpected,
+ esp_bus_unexpected,
+};
+
+/* This is the second tier in our dual-level SCSI state machine. */
+static int esp_work_bus(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr = esp->current_SC;
+ unsigned int phase;
+
+ ESPBUS(("esp_work_bus: "));
+ if (!SCptr) {
+ ESPBUS(("reconnect\n"));
+ return esp_do_reconnect(esp);
+ }
+ phase = SCptr->SCp.phase;
+ if ((phase & 0xf0) == in_phases_mask)
+ return bus_vector[(phase & 0x0f)](esp);
+ else if ((phase & 0xf0) == in_slct_mask)
+ return esp_select_complete(esp);
+ else
+ return esp_bus_unexpected(esp);
+}
+
+static espfunc_t isvc_vector[] = {
+ 0,
+ esp_do_phase_determine,
+ esp_do_resetbus,
+ esp_finish_reset,
+ esp_work_bus
+};
+
+/* Main interrupt handler for an esp adapter. */
+static void esp_handle(struct esp *esp)
+{
+ struct scsi_cmnd *SCptr;
+ int what_next = do_intr_end;
+
+ SCptr = esp->current_SC;
+
+ /* Check for errors. */
+ esp->sreg = sbus_readb(esp->eregs + ESP_STATUS);
+ esp->sreg &= (~ESP_STAT_INTR);
+ if (esp->erev == fashme) {
+ esp->sreg2 = sbus_readb(esp->eregs + ESP_STATUS2);
+ esp->seqreg = (sbus_readb(esp->eregs + ESP_SSTEP) & ESP_STEP_VBITS);
+ }
+
+ if (esp->sreg & (ESP_STAT_SPAM)) {
+ /* Gross error, could be due to one of:
+ *
+ * - top of fifo overwritten, could be because
+ * we tried to do a synchronous transfer with
+ * an offset greater than ESP fifo size
+ *
+ * - top of command register overwritten
+ *
+ * - DMA setup to go in one direction, SCSI
+ * bus points in the other, whoops
+ *
+ * - weird phase change during asynchronous
+ * data phase while we are initiator
+ */
+ ESPLOG(("esp%d: Gross error sreg=%2x\n", esp->esp_id, esp->sreg));
+
+ /* If a command is live on the bus we cannot safely
+ * reset the bus, so we'll just let the pieces fall
+ * where they may. Here we are hoping that the
+ * target will be able to cleanly go away soon
+ * so we can safely reset things.
+ */
+ if (!SCptr) {
+ ESPLOG(("esp%d: No current cmd during gross error, "
+ "resetting bus\n", esp->esp_id));
+ what_next = do_reset_bus;
+ goto state_machine;
+ }
+ }
+
+ if (sbus_readl(esp->dregs + DMA_CSR) & DMA_HNDL_ERROR) {
+ /* A DMA gate array error. Here we must
+ * be seeing one of two things. Either the
+ * virtual to physical address translation
+ * on the SBUS could not occur, else the
+ * translation it did get pointed to a bogus
+ * page. Ho hum...
+ */
+ ESPLOG(("esp%d: DMA error %08x\n", esp->esp_id,
+ sbus_readl(esp->dregs + DMA_CSR)));
+
+ /* DMA gate array itself must be reset to clear the
+ * error condition.
+ */
+ esp_reset_dma(esp);
+
+ what_next = do_reset_bus;
+ goto state_machine;
+ }
+
+ esp->ireg = sbus_readb(esp->eregs + ESP_INTRPT); /* Unlatch intr reg */
+
+ if (esp->erev == fashme) {
+ /* This chip is really losing. */
+ ESPHME(("HME["));
+
+ ESPHME(("sreg2=%02x,", esp->sreg2));
+ /* Must latch fifo before reading the interrupt
+ * register else garbage ends up in the FIFO
+ * which confuses the driver utterly.
+ */
+ if (!(esp->sreg2 & ESP_STAT2_FEMPTY) ||
+ (esp->sreg2 & ESP_STAT2_F1BYTE)) {
+ ESPHME(("fifo_workaround]"));
+ hme_fifo_read(esp);
+ } else {
+ ESPHME(("no_fifo_workaround]"));
+ }
+ }
+
+ /* No current cmd is only valid at this point when there are
+ * commands off the bus or we are trying a reset.
+ */
+ if (!SCptr && !esp->disconnected_SC && !(esp->ireg & ESP_INTR_SR)) {
+ /* Panic is safe, since current_SC is null. */
+ ESPLOG(("esp%d: no command in esp_handle()\n", esp->esp_id));
+ panic("esp_handle: current_SC == penguin within interrupt!");
+ }
+
+ if (esp->ireg & (ESP_INTR_IC)) {
+ /* Illegal command fed to ESP. Outside of obvious
+ * software bugs that could cause this, there is
+ * a condition with esp100 where we can confuse the
+ * ESP into an erroneous illegal command interrupt
+ * because it does not scrape the FIFO properly
+ * for reselection. See esp100_reconnect_hwbug()
+ * to see how we try very hard to avoid this.
+ */
+ ESPLOG(("esp%d: invalid command\n", esp->esp_id));
+
+ esp_dump_state(esp);
+
+ if (SCptr != NULL) {
+ /* Devices with very buggy firmware can drop BSY
+ * during a scatter list interrupt when using sync
+ * mode transfers. We continue the transfer as
+ * expected, the target drops the bus, the ESP
+ * gets confused, and we get a illegal command
+ * interrupt because the bus is in the disconnected
+ * state now and ESP_CMD_TI is only allowed when
+ * a nexus is alive on the bus.
+ */
+ ESPLOG(("esp%d: Forcing async and disabling disconnect for "
+ "target %d\n", esp->esp_id, SCptr->device->id));
+ SCptr->device->borken = 1; /* foo on you */
+ }
+
+ what_next = do_reset_bus;
+ } else if (!(esp->ireg & ~(ESP_INTR_FDONE | ESP_INTR_BSERV | ESP_INTR_DC))) {
+ if (SCptr) {
+ unsigned int phase = SCptr->SCp.phase;
+
+ if (phase & in_phases_mask) {
+ what_next = esp_work_bus(esp);
+ } else if (phase & in_slct_mask) {
+ what_next = esp_select_complete(esp);
+ } else {
+ ESPLOG(("esp%d: interrupt for no good reason...\n",
+ esp->esp_id));
+ what_next = do_intr_end;
+ }
+ } else {
+ ESPLOG(("esp%d: BSERV or FDONE or DC while SCptr==NULL\n",
+ esp->esp_id));
+ what_next = do_reset_bus;
+ }
+ } else if (esp->ireg & ESP_INTR_SR) {
+ ESPLOG(("esp%d: SCSI bus reset interrupt\n", esp->esp_id));
+ what_next = do_reset_complete;
+ } else if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN)) {
+ ESPLOG(("esp%d: AIEEE we have been selected by another initiator!\n",
+ esp->esp_id));
+ what_next = do_reset_bus;
+ } else if (esp->ireg & ESP_INTR_RSEL) {
+ if (SCptr == NULL) {
+ /* This is ok. */
+ what_next = esp_do_reconnect(esp);
+ } else if (SCptr->SCp.phase & in_slct_mask) {
+ /* Only selection code knows how to clean
+ * up properly.
+ */
+ ESPDISC(("Reselected during selection attempt\n"));
+ what_next = esp_select_complete(esp);
+ } else {
+ ESPLOG(("esp%d: Reselected while bus is busy\n",
+ esp->esp_id));
+ what_next = do_reset_bus;
+ }
+ }
+
+ /* This is tier-one in our dual level SCSI state machine. */
+state_machine:
+ while (what_next != do_intr_end) {
+ if (what_next >= do_phase_determine &&
+ what_next < do_intr_end) {
+ what_next = isvc_vector[what_next](esp);
+ } else {
+ /* state is completely lost ;-( */
+ ESPLOG(("esp%d: interrupt engine loses state, resetting bus\n",
+ esp->esp_id));
+ what_next = do_reset_bus;
+ }
+ }
+}
+
+/* Service only the ESP described by dev_id. */
+static irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs)
+{
+ struct esp *esp = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(esp->ehost->host_lock, flags);
+ if (ESP_IRQ_P(esp->dregs)) {
+ ESP_INTSOFF(esp->dregs);
+
+ ESPIRQ(("I[%d:%d](", smp_processor_id(), esp->esp_id));
+ esp_handle(esp);
+ ESPIRQ((")"));
+
+ ESP_INTSON(esp->dregs);
+ }
+ spin_unlock_irqrestore(esp->ehost->host_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int esp_slave_alloc(struct scsi_device *SDptr)
+{
+ struct esp_device *esp_dev =
+ kmalloc(sizeof(struct esp_device), GFP_ATOMIC);
+
+ if (!esp_dev)
+ return -ENOMEM;
+ memset(esp_dev, 0, sizeof(struct esp_device));
+ SDptr->hostdata = esp_dev;
+ return 0;
+}
+
+static void esp_slave_destroy(struct scsi_device *SDptr)
+{
+ struct esp *esp = (struct esp *) SDptr->host->hostdata;
+
+ esp->targets_present &= ~(1 << SDptr->id);
+ kfree(SDptr->hostdata);
+ SDptr->hostdata = NULL;
+}
+
+static struct scsi_host_template driver_template = {
+ .proc_name = "esp",
+ .proc_info = esp_proc_info,
+ .name = "Sun ESP 100/100a/200",
+ .detect = esp_detect,
+ .slave_alloc = esp_slave_alloc,
+ .slave_destroy = esp_slave_destroy,
+ .release = esp_release,
+ .info = esp_info,
+ .queuecommand = esp_queue,
+ .eh_abort_handler = esp_abort,
+ .eh_bus_reset_handler = esp_reset,
+ .can_queue = 7,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+#include "scsi_module.c"
+
+MODULE_LICENSE("GPL");
+
OpenPOWER on IntegriCloud