Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits)
  [SCSI] arcmsr: fix write to device check
  [SCSI] lpfc: lower stack use in lpfc_fc_frame_check
  [SCSI] eliminate an unnecessary local variable from scsi_remove_target()
  [SCSI] libiscsi: use bh locking instead of irq with session lock
  [SCSI] libiscsi: do not take host lock in queuecommand
  [SCSI] be2iscsi: fix null ptr when accessing task hdr
  [SCSI] be2iscsi: fix gfp use in alloc_pdu
  [SCSI] libiscsi: add more informative failure message during iscsi scsi eh
  [SCSI] gdth: Add missing call to gdth_ioctl_free
  [SCSI] bfa: remove unused defintions and misc cleanups
  [SCSI] bfa: remove inactive functions
  [SCSI] bfa: replace bfa_assert with WARN_ON
  [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.
  [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.
  [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.
  [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.
  [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs.
  [SCSI] qla2xxx: Remove redundant module parameter permission bits
  [SCSI] qla2xxx: Add sysfs node for displaying board temperature.
  [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.
  ...

7 files changed, 195 insertions, 181 deletions

diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
index 1b6f86b..30e6bdb 100644
--- a/drivers/scsi/bnx2i/57xx_iscsi_constants.h
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -1,12 +1,13 @@
 /* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 #ifndef __57XX_ISCSI_CONSTANTS_H_
 #define __57XX_ISCSI_CONSTANTS_H_
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
index 36af1af..dad6c8a 100644
--- a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -1,12 +1,13 @@
 /* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 #ifndef __57XX_ISCSI_HSI_LINUX_LE__
 #define __57XX_ISCSI_HSI_LINUX_LE__
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index a44b1b3..e1ca5fe 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -1,6 +1,6 @@
 /* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #ifndef _BNX2I_H_
@@ -649,6 +650,7 @@ enum {
 	EP_STATE_OFLD_FAILED            = 0x8000000,
 	EP_STATE_CONNECT_FAILED         = 0x10000000,
 	EP_STATE_DISCONN_TIMEDOUT       = 0x20000000,
+	EP_STATE_OFLD_FAILED_CID_BUSY   = 0x80000000,
 };
 
 /**
@@ -717,14 +719,11 @@ extern struct device_attribute *bnx2i_dev_attributes[];
  * Function Prototypes
  */
 extern void bnx2i_identify_device(struct bnx2i_hba *hba);
-extern void bnx2i_register_device(struct bnx2i_hba *hba);
 
 extern void bnx2i_ulp_init(struct cnic_dev *dev);
 extern void bnx2i_ulp_exit(struct cnic_dev *dev);
 extern void bnx2i_start(void *handle);
 extern void bnx2i_stop(void *handle);
-extern void bnx2i_reg_dev_all(void);
-extern void bnx2i_unreg_dev_all(void);
 extern struct bnx2i_hba *get_adapter_list_head(void);
 
 struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
@@ -761,11 +760,11 @@ extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
 				   struct iscsi_task *mtask);
 extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
 				       struct bnx2i_cmd *cmd);
-extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
-				     struct bnx2i_endpoint *ep);
-extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
-extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+extern int bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
 				    struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern int bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+				   struct bnx2i_endpoint *ep);
 
 extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
 			       struct bnx2i_endpoint *ep);
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 2f9622e..96505e3 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1,6 +1,6 @@
 /* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include <linux/gfp.h>
@@ -385,6 +386,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	struct bnx2i_cmd *bnx2i_cmd;
 	struct bnx2i_tmf_request *tmfabort_wqe;
 	u32 dword;
+	u32 scsi_lun[2];
 
 	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -426,7 +428,10 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	default:
 		tmfabort_wqe->ref_itt = RESERVED_ITT;
 	}
-	memcpy(tmfabort_wqe->lun, tmfabort_hdr->lun, sizeof(struct scsi_lun));
+	memcpy(scsi_lun, tmfabort_hdr->lun, sizeof(struct scsi_lun));
+	tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
+
 	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
 
 	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
@@ -697,10 +702,11 @@ void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
  * 	iscsi connection context clean-up process
  */
-void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+int bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[2];
 	struct iscsi_kwqe_conn_destroy conn_cleanup;
+	int rc = -EINVAL;
 
 	memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
 
@@ -717,7 +723,9 @@ void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 
 	kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+
+	return rc;
 }
 
 
@@ -728,8 +736,8 @@ void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
  *
  * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
-					  struct bnx2i_endpoint *ep)
+static int bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					 struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[2];
 	struct iscsi_kwqe_conn_offload1 ofld_req1;
@@ -737,6 +745,7 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	dma_addr_t dma_addr;
 	int num_kwqes = 2;
 	u32 *ptbl;
+	int rc = -EINVAL;
 
 	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 	ofld_req1.hdr.flags =
@@ -774,7 +783,9 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	ofld_req2.num_additional_wqes = 0;
 
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+
+	return rc;
 }
 
 
@@ -785,8 +796,8 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
  *
  * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
-					   struct bnx2i_endpoint *ep)
+static int bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					  struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[5];
 	struct iscsi_kwqe_conn_offload1 ofld_req1;
@@ -795,6 +806,7 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	dma_addr_t dma_addr;
 	int num_kwqes = 2;
 	u32 *ptbl;
+	int rc = -EINVAL;
 
 	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 	ofld_req1.hdr.flags =
@@ -840,7 +852,9 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	num_kwqes += 1;
 
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+
+	return rc;
 }
 
 /**
@@ -851,12 +865,16 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
  *
  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+int bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 {
+	int rc;
+
 	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
-		bnx2i_5771x_send_conn_ofld_req(hba, ep);
+		rc = bnx2i_5771x_send_conn_ofld_req(hba, ep);
 	else
-		bnx2i_570x_send_conn_ofld_req(hba, ep);
+		rc = bnx2i_570x_send_conn_ofld_req(hba, ep);
+
+	return rc;
 }
 
 
@@ -1513,7 +1531,7 @@ static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
 	task = iscsi_itt_to_task(conn,
 				 nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
 	if (task)
-		iscsi_put_task(task);
+		__iscsi_put_task(task);
 	spin_unlock(&session->lock);
 }
 
@@ -1549,11 +1567,9 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	struct iscsi_task *task;
 	struct bnx2i_nop_in_msg *nop_in;
 	struct iscsi_nopin *hdr;
-	u32 itt;
 	int tgt_async_nop = 0;
 
 	nop_in = (struct bnx2i_nop_in_msg *)cqe;
-	itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
 
 	spin_lock(&session->lock);
 	hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
@@ -1563,7 +1579,7 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
 	hdr->ttt = cpu_to_be32(nop_in->ttt);
 
-	if (itt == (u16) RESERVED_ITT) {
+	if (nop_in->itt == (u16) RESERVED_ITT) {
 		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
 		hdr->itt = RESERVED_ITT;
 		tgt_async_nop = 1;
@@ -1571,7 +1587,8 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	}
 
 	/* this is a response to one of our nop-outs */
-	task = iscsi_itt_to_task(conn, itt);
+	task = iscsi_itt_to_task(conn,
+			 (itt_t) (nop_in->itt & ISCSI_NOP_IN_MSG_INDEX));
 	if (task) {
 		hdr->flags = ISCSI_FLAG_CMD_FINAL;
 		hdr->itt = task->hdr->itt;
@@ -1721,9 +1738,18 @@ static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
 			break;
 
-		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx))) {
+			if (nopin->op_code == ISCSI_OP_NOOP_IN &&
+			    nopin->itt == (u16) RESERVED_ITT) {
+				printk(KERN_ALERT "bnx2i: Unsolicited "
+					"NOP-In detected for suspended "
+					"connection dev=%s!\n",
+					bnx2i_conn->hba->netdev->name);
+				bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+				goto cqe_out;
+			}
 			break;
-
+		}
 		tgt_async_msg = 0;
 
 		switch (nopin->op_code) {
@@ -1770,10 +1796,9 @@ static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
 					  nopin->op_code);
 		}
-
 		if (!tgt_async_msg)
 			bnx2i_conn->ep->num_active_cmds--;
-
+cqe_out:
 		/* clear out in production version only, till beta keep opcode
 		 * field intact, will be helpful in debugging (context dump)
 		 * nopin->op_code = 0;
@@ -2154,11 +2179,24 @@ static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
 	}
 
 	if (ofld_kcqe->completion_status) {
+		ep->state = EP_STATE_OFLD_FAILED;
 		if (ofld_kcqe->completion_status ==
 		    ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
-			printk(KERN_ALERT "bnx2i: unable to allocate"
-					  " iSCSI context resources\n");
-		ep->state = EP_STATE_OFLD_FAILED;
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - unable "
+				"to allocate iSCSI context resources\n",
+				hba->netdev->name);
+		else if (ofld_kcqe->completion_status ==
+			 ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE)
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
+				"opcode\n", hba->netdev->name);
+		else if (ofld_kcqe->completion_status ==
+			ISCSI_KCQE_COMPLETION_STATUS_CID_BUSY)
+			/* error status code valid only for 5771x chipset */
+			ep->state = EP_STATE_OFLD_FAILED_CID_BUSY;
+		else
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
+				"error code %d\n", hba->netdev->name,
+				ofld_kcqe->completion_status);
 	} else {
 		ep->state = EP_STATE_OFLD_COMPL;
 		cid_addr = ofld_kcqe->iscsi_conn_context_id;
@@ -2339,10 +2377,14 @@ static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
 static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
 {
 	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+	u32 old_state = ep->state;
 
 	ep->state = EP_STATE_TCP_RST_RCVD;
-	if (ep->conn)
-		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+	if (old_state == EP_STATE_DISCONN_START)
+		wake_up_interruptible(&ep->ofld_wait);
+	else
+		if (ep->conn)
+			bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
 }
 
 
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 50c2aa3b..72a7b2d 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -1,6 +1,6 @@
 /* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include "bnx2i.h"
@@ -17,8 +18,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
 static u32 adapter_count;
 
 #define DRV_MODULE_NAME		"bnx2i"
-#define DRV_MODULE_VERSION	"2.1.3"
-#define DRV_MODULE_RELDATE	"Aug 10, 2010"
+#define DRV_MODULE_VERSION	"2.6.2.2"
+#define DRV_MODULE_RELDATE	"Nov 23, 2010"
 
 static char version[] __devinitdata =
 		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
@@ -65,8 +66,6 @@ MODULE_PARM_DESC(rq_size, "Configure RQ size");
 
 u64 iscsi_error_mask = 0x00;
 
-static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
-
 
 /**
  * bnx2i_identify_device - identifies NetXtreme II device type
@@ -211,13 +210,24 @@ void bnx2i_stop(void *handle)
 {
 	struct bnx2i_hba *hba = handle;
 	int conns_active;
+	int wait_delay = 1 * HZ;
 
 	/* check if cleanup happened in GOING_DOWN context */
-	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
-				&hba->adapter_state))
+	if (!test_and_set_bit(ADAPTER_STATE_GOING_DOWN,
+			      &hba->adapter_state)) {
 		iscsi_host_for_each_session(hba->shost,
 					    bnx2i_drop_session);
-
+		wait_delay = hba->hba_shutdown_tmo;
+	}
+	/* Wait for inflight offload connection tasks to complete before
+	 * proceeding. Forcefully terminate all connection recovery in
+	 * progress at the earliest, either in bind(), send_pdu(LOGIN),
+	 * or conn_start()
+	 */
+	wait_event_interruptible_timeout(hba->eh_wait,
+					 (list_empty(&hba->ep_ofld_list) &&
+					 list_empty(&hba->ep_destroy_list)),
+					 10 * HZ);
 	/* Wait for all endpoints to be torn down, Chip will be reset once
 	 *  control returns to network driver. So it is required to cleanup and
 	 * release all connection resources before returning from this routine.
@@ -226,7 +236,7 @@ void bnx2i_stop(void *handle)
 		conns_active = hba->ofld_conns_active;
 		wait_event_interruptible_timeout(hba->eh_wait,
 				(hba->ofld_conns_active != conns_active),
-				hba->hba_shutdown_tmo);
+				wait_delay);
 		if (hba->ofld_conns_active == conns_active)
 			break;
 	}
@@ -235,88 +245,10 @@ void bnx2i_stop(void *handle)
 	/* This flag should be cleared last so that ep_disconnect() gracefully
 	 * cleans up connection context
 	 */
+	clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
 	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 }
 
-/**
- * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
- * @hba:	Adapter instance to register
- *
- * registers bnx2i adapter instance with the cnic driver while holding the
- *	adapter structure lock
- */
-void bnx2i_register_device(struct bnx2i_hba *hba)
-{
-	int rc;
-
-	if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
-	    test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
-		return;
-	}
-
-	rc = hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
-
-	if (!rc)
-		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
-}
-
-
-/**
- * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
- *
- * registers all bnx2i adapter instances with the cnic driver while holding
- *	the global resource lock
- */
-void bnx2i_reg_dev_all(void)
-{
-	struct bnx2i_hba *hba, *temp;
-
-	mutex_lock(&bnx2i_dev_lock);
-	list_for_each_entry_safe(hba, temp, &adapter_list, link)
-		bnx2i_register_device(hba);
-	mutex_unlock(&bnx2i_dev_lock);
-}
-
-
-/**
- * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
- * @hba:	Adapter instance to unregister
- *
- * registers bnx2i adapter instance with the cnic driver while holding
- *	the adapter structure lock
- */
-static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
-{
-	if (hba->ofld_conns_active ||
-	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
-	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
-		return;
-
-	hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
-
-	/* ep_disconnect could come before NETDEV_DOWN, driver won't
-	 * see NETDEV_DOWN as it already unregistered itself.
-	 */
-	hba->adapter_state = 0;
-	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
-}
-
-/**
- * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
- *
- * unregisters all bnx2i adapter instances with the cnic driver while holding
- *	the global resource lock
- */
-void bnx2i_unreg_dev_all(void)
-{
-	struct bnx2i_hba *hba, *temp;
-
-	mutex_lock(&bnx2i_dev_lock);
-	list_for_each_entry_safe(hba, temp, &adapter_list, link)
-		bnx2i_unreg_one_device(hba);
-	mutex_unlock(&bnx2i_dev_lock);
-}
-
 
 /**
  * bnx2i_init_one - initialize an adapter instance and allocate memory resources
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index fb50efb..f0dce26 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1,7 +1,7 @@
 /*
  * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -10,6 +10,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include <linux/slab.h>
@@ -411,7 +412,9 @@ static void bnx2i_free_ep(struct iscsi_endpoint *ep)
 	bnx2i_ep->state = EP_STATE_IDLE;
 	bnx2i_ep->hba->ofld_conns_active--;
 
-	bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+	if (bnx2i_ep->ep_iscsi_cid != (u16) -1)
+		bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+
 	if (bnx2i_ep->conn) {
 		bnx2i_ep->conn->ep = NULL;
 		bnx2i_ep->conn = NULL;
@@ -1383,6 +1386,12 @@ static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
 	ep = iscsi_lookup_endpoint(transport_fd);
 	if (!ep)
 		return -EINVAL;
+	/*
+	 * Forcefully terminate all in progress connection recovery at the
+	 * earliest, either in bind(), send_pdu(LOGIN), or conn_start()
+	 */
+	if (bnx2i_adapter_ready(hba))
+		return -EIO;
 
 	bnx2i_ep = ep->dd_data;
 	if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
@@ -1404,7 +1413,6 @@ static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
 				  hba->netdev->name);
 		return -EEXIST;
 	}
-
 	bnx2i_ep->conn = bnx2i_conn;
 	bnx2i_conn->ep = bnx2i_ep;
 	bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
@@ -1461,21 +1469,28 @@ static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
 	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
 	int len = 0;
 
+	if (!(bnx2i_conn && bnx2i_conn->ep && bnx2i_conn->ep->hba))
+		goto out;
+
 	switch (param) {
 	case ISCSI_PARAM_CONN_PORT:
-		if (bnx2i_conn->ep)
+		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
+		if (bnx2i_conn->ep->cm_sk)
 			len = sprintf(buf, "%hu\n",
 				      bnx2i_conn->ep->cm_sk->dst_port);
+		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
 		break;
 	case ISCSI_PARAM_CONN_ADDRESS:
-		if (bnx2i_conn->ep)
+		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
+		if (bnx2i_conn->ep->cm_sk)
 			len = sprintf(buf, "%pI4\n",
 				      &bnx2i_conn->ep->cm_sk->dst_ip);
+		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
 		break;
 	default:
 		return iscsi_conn_get_param(cls_conn, param, buf);
 	}
-
+out:
 	return len;
 }
 
@@ -1599,8 +1614,6 @@ static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
 	struct bnx2i_hba *hba;
 	struct cnic_dev *cnic = NULL;
 
-	bnx2i_reg_dev_all();
-
 	hba = get_adapter_list_head();
 	if (hba && hba->cnic)
 		cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
@@ -1640,18 +1653,26 @@ no_nx2_route:
 static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 				 struct bnx2i_endpoint *ep)
 {
-	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) && ep->cm_sk)
 		hba->cnic->cm_destroy(ep->cm_sk);
 
-	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
-		ep->state = EP_STATE_DISCONN_COMPL;
-
 	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
 	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
-		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
-				  " NW/PCIe trace, driver msgs to developers"
-				  " for analysis\n");
-		return 1;
+		if (ep->conn && ep->conn->cls_conn &&
+		    ep->conn->cls_conn->dd_data) {
+			struct iscsi_conn *conn = ep->conn->cls_conn->dd_data;
+
+			/* Must suspend all rx queue activity for this ep */
+			set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+		}
+		/* CONN_DISCONNECT timeout may or may not be an issue depending
+		 * on what transcribed in TCP layer, different targets behave
+		 * differently
+		 */
+		printk(KERN_ALERT "bnx2i (%s): - WARN - CONN_DISCON timed out, "
+				  "please submit GRC Dump, NW/PCIe trace, "
+				  "driver msgs to developers for analysis\n",
+				  hba->netdev->name);
 	}
 
 	ep->state = EP_STATE_CLEANUP_START;
@@ -1664,7 +1685,9 @@ static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 	bnx2i_ep_destroy_list_add(hba, ep);
 
 	/* destroy iSCSI context, wait for it to complete */
-	bnx2i_send_conn_destroy(hba, ep);
+	if (bnx2i_send_conn_destroy(hba, ep))
+		ep->state = EP_STATE_CLEANUP_CMPL;
+
 	wait_event_interruptible(ep->ofld_wait,
 				 (ep->state != EP_STATE_CLEANUP_START));
 
@@ -1711,8 +1734,6 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	if (shost) {
 		/* driver is given scsi host to work with */
 		hba = iscsi_host_priv(shost);
-		/* Register the device with cnic if not already done so */
-		bnx2i_register_device(hba);
 	} else
 		/*
 		 * check if the given destination can be reached through
@@ -1720,13 +1741,17 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 		 */
 		hba = bnx2i_check_route(dst_addr);
 
-	if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+	if (!hba) {
 		rc = -EINVAL;
 		goto nohba;
 	}
+	mutex_lock(&hba->net_dev_lock);
 
+	if (bnx2i_adapter_ready(hba) || !hba->cid_que.cid_free_cnt) {
+		rc = -EPERM;
+		goto check_busy;
+	}
 	cnic = hba->cnic;
-	mutex_lock(&hba->net_dev_lock);
 	ep = bnx2i_alloc_ep(hba);
 	if (!ep) {
 		rc = -ENOMEM;
@@ -1734,23 +1759,21 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	}
 	bnx2i_ep = ep->dd_data;
 
-	if (bnx2i_adapter_ready(hba)) {
-		rc = -EPERM;
-		goto net_if_down;
-	}
-
 	bnx2i_ep->num_active_cmds = 0;
 	iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
 	if (iscsi_cid == -1) {
-		printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+		printk(KERN_ALERT "bnx2i (%s): alloc_ep - unable to allocate "
+			"iscsi cid\n", hba->netdev->name);
 		rc = -ENOMEM;
-		goto iscsi_cid_err;
+		bnx2i_free_ep(ep);
+		goto check_busy;
 	}
 	bnx2i_ep->hba_age = hba->age;
 
 	rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
 	if (rc != 0) {
-		printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+		printk(KERN_ALERT "bnx2i (%s): ep_conn - alloc QP resc error"
+			"\n", hba->netdev->name);
 		rc = -ENOMEM;
 		goto qp_resc_err;
 	}
@@ -1765,7 +1788,18 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
 	add_timer(&bnx2i_ep->ofld_timer);
 
-	bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+	if (bnx2i_send_conn_ofld_req(hba, bnx2i_ep)) {
+		if (bnx2i_ep->state == EP_STATE_OFLD_FAILED_CID_BUSY) {
+			printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
+				hba->netdev->name, bnx2i_ep->ep_iscsi_cid);
+			rc = -EBUSY;
+		} else
+			rc = -ENOSPC;
+		printk(KERN_ALERT "bnx2i (%s): unable to send conn offld kwqe"
+			"\n", hba->netdev->name);
+		bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+		goto conn_failed;
+	}
 
 	/* Wait for CNIC hardware to setup conn context and return 'cid' */
 	wait_event_interruptible(bnx2i_ep->ofld_wait,
@@ -1778,7 +1812,12 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
 
 	if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
-		rc = -ENOSPC;
+		if (bnx2i_ep->state == EP_STATE_OFLD_FAILED_CID_BUSY) {
+			printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
+				hba->netdev->name, bnx2i_ep->ep_iscsi_cid);
+			rc = -EBUSY;
+		} else
+			rc = -ENOSPC;
 		goto conn_failed;
 	}
 
@@ -1786,7 +1825,8 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 			     iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
 	if (rc) {
 		rc = -EINVAL;
-		goto conn_failed;
+		/* Need to terminate and cleanup the connection */
+		goto release_ep;
 	}
 
 	bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
@@ -1830,15 +1870,12 @@ release_ep:
 		return ERR_PTR(rc);
 	}
 conn_failed:
-net_if_down:
-iscsi_cid_err:
 	bnx2i_free_qp_resc(hba, bnx2i_ep);
 qp_resc_err:
 	bnx2i_free_ep(ep);
 check_busy:
 	mutex_unlock(&hba->net_dev_lock);
 nohba:
-	bnx2i_unreg_dev_all();
 	return ERR_PTR(rc);
 }
 
@@ -1898,12 +1935,13 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
 		cnic_dev_10g = 1;
 
 	switch (bnx2i_ep->state) {
-	case EP_STATE_CONNECT_START:
+	case EP_STATE_CONNECT_FAILED:
 	case EP_STATE_CLEANUP_FAILED:
 	case EP_STATE_OFLD_FAILED:
 	case EP_STATE_DISCONN_TIMEDOUT:
 		ret = 0;
 		break;
+	case EP_STATE_CONNECT_START:
 	case EP_STATE_CONNECT_COMPL:
 	case EP_STATE_ULP_UPDATE_START:
 	case EP_STATE_ULP_UPDATE_COMPL:
@@ -1914,13 +1952,10 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
 		ret = 1;
 		break;
 	case EP_STATE_TCP_RST_RCVD:
-		ret = 0;
-		break;
-	case EP_STATE_CONNECT_FAILED:
 		if (cnic_dev_10g)
-			ret = 1;
-		else
 			ret = 0;
+		else
+			ret = 1;
 		break;
 	default:
 		ret = 0;
@@ -1953,7 +1988,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 	if (!cnic)
 		return 0;
 
-	if (bnx2i_ep->state == EP_STATE_IDLE)
+	if (bnx2i_ep->state == EP_STATE_IDLE ||
+	    bnx2i_ep->state == EP_STATE_DISCONN_TIMEDOUT)
 		return 0;
 
 	if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
@@ -1979,9 +2015,10 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 			if (session->state == ISCSI_STATE_LOGGING_OUT) {
 				if (bnx2i_ep->state == EP_STATE_LOGOUT_SENT) {
 					/* Logout sent, but no resp */
-					printk(KERN_ALERT "bnx2i - WARNING "
-						"logout response was not "
-						"received!\n");
+					printk(KERN_ALERT "bnx2i (%s): WARNING"
+						" logout response was not "
+						"received!\n",
+						bnx2i_ep->hba->netdev->name);
 				} else if (bnx2i_ep->state ==
 					   EP_STATE_LOGOUT_RESP_RCVD)
 					close = 1;
@@ -1999,9 +2036,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 	else
 		close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
 
-	/* No longer allow CFC delete if cm_close/abort fails the request */
 	if (close_ret)
-		printk(KERN_ALERT "bnx2i: %s close/abort(%d) returned %d\n",
+		printk(KERN_ALERT "bnx2i (%s): close/abort(%d) returned %d\n",
 			bnx2i_ep->hba->netdev->name, close, close_ret);
 	else
 		/* wait for option-2 conn teardown */
@@ -2015,7 +2051,7 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 destroy_conn:
 	bnx2i_ep_active_list_del(hba, bnx2i_ep);
 	if (bnx2i_tear_down_conn(hba, bnx2i_ep))
-		ret = -EINVAL;
+		return -EINVAL;
 out:
 	bnx2i_ep->state = EP_STATE_IDLE;
 	return ret;
@@ -2054,14 +2090,17 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
 
 	mutex_lock(&hba->net_dev_lock);
 
-	if (bnx2i_ep->state == EP_STATE_IDLE)
-		goto return_bnx2i_ep;
+	if (bnx2i_ep->state == EP_STATE_DISCONN_TIMEDOUT)
+		goto out;
 
-	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+	if (bnx2i_ep->state == EP_STATE_IDLE)
 		goto free_resc;
 
-	if (bnx2i_ep->hba_age != hba->age)
+	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+	    (bnx2i_ep->hba_age != hba->age)) {
+		bnx2i_ep_active_list_del(hba, bnx2i_ep);
 		goto free_resc;
+	}
 
 	/* Do all chip cleanup here */
 	if (bnx2i_hw_ep_disconnect(bnx2i_ep)) {
@@ -2070,14 +2109,13 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
 	}
 free_resc:
 	bnx2i_free_qp_resc(hba, bnx2i_ep);
-return_bnx2i_ep:
+
 	if (bnx2i_conn)
 		bnx2i_conn->ep = NULL;
 
 	bnx2i_free_ep(ep);
+out:
 	mutex_unlock(&hba->net_dev_lock);
-	if (!hba->ofld_conns_active)
-		bnx2i_unreg_dev_all();
 
 	wake_up_interruptible(&hba->eh_wait);
 }
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
index 96426b7..9174196 100644
--- a/drivers/scsi/bnx2i/bnx2i_sysfs.c
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -1,12 +1,13 @@
 /* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2004 - 2009 Broadcom Corporation
+ * Copyright (c) 2004 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include "bnx2i.h"