[SCSI] bnx2i: Optimized the iSCSI offload performance

Modified the event coalescing code for iSCSI offload to combat both
corner cases and optimize performance as follows:

1. Added mechanism to loop back a second time to process any leftover
CQEs that was generated by the hardware during the time the driver is
busy processing previous CQEs in the bh.  This not only helps the
performance but also fixes the corner case when no more CQEs are being
generated in the pipeline; so those leftover CQEs will get a a chance
to be processed.

2. Added ARM_CQE_FP to distinguish between fast path arming versus
slow path arming.  This change will guarantee that the CQEs will
always get a chance to be re-armed during fast path completions.

3. Removed the inline event coalescing division for perf optimization.
Also fixed a division-by-zero error when the event_coal_div module
param was set to 0.

4. Changed the default SQ WQEs size from 256 to 128 to match chip
default.

5. Changed the cmd_per_lun from 32 to 24.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>

1 files changed, 10 insertions, 6 deletions

diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index cfd5902..6bdd25a 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -66,11 +66,11 @@
 #define BD_SPLIT_SIZE			32768
 
 /* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
-#define BNX2I_SQ_WQES_MIN 		16
-#define BNX2I_570X_SQ_WQES_MAX 		128
-#define BNX2I_5770X_SQ_WQES_MAX 	512
-#define BNX2I_570X_SQ_WQES_DEFAULT 	128
-#define BNX2I_5770X_SQ_WQES_DEFAULT 	256
+#define BNX2I_SQ_WQES_MIN		16
+#define BNX2I_570X_SQ_WQES_MAX		128
+#define BNX2I_5770X_SQ_WQES_MAX		512
+#define BNX2I_570X_SQ_WQES_DEFAULT	128
+#define BNX2I_5770X_SQ_WQES_DEFAULT	128
 
 #define BNX2I_570X_CQ_WQES_MAX 		128
 #define BNX2I_5770X_CQ_WQES_MAX 	512
@@ -115,6 +115,7 @@
 #define BNX2X_MAX_CQS			8
 
 #define CNIC_ARM_CQE			1
+#define CNIC_ARM_CQE_FP			2
 #define CNIC_DISARM_CQE			0
 
 #define REG_RD(__hba, offset)				\
@@ -666,7 +667,9 @@ enum {
  *                      after HBA reset is completed by bnx2i/cnic/bnx2
  *                      modules
  * @state:              tracks offload connection state machine
- * @teardown_mode:      indicates if conn teardown is abortive or orderly
+ * @timestamp:          tracks the start time when the ep begins to connect
+ * @num_active_cmds:    tracks the number of outstanding commands for this ep
+ * @ec_shift:           the amount of shift as part of the event coal calc
  * @qp:                 QP information
  * @ids:                contains chip allocated *context id* & driver assigned
  *                      *iscsi cid*
@@ -685,6 +688,7 @@ struct bnx2i_endpoint {
 	u32 state;
 	unsigned long timestamp;
 	int num_active_cmds;
+	u32 ec_shift;
 
 	struct qp_info qp;
 	struct ep_handles ids;