summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aic7xxx_old.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aic7xxx_old.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/aic7xxx_old.c')
-rw-r--r--drivers/scsi/aic7xxx_old.c11178
1 files changed, 11178 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
new file mode 100644
index 0000000..a6e7bb0
--- /dev/null
+++ b/drivers/scsi/aic7xxx_old.c
@@ -0,0 +1,11178 @@
+/*+M*************************************************************************
+ * Adaptec AIC7xxx device driver for Linux.
+ *
+ * Copyright (c) 1994 John Aycock
+ * The University of Calgary Department of Computer Science.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Sources include the Adaptec 1740 driver (aha1740.c), the Ultrastor 24F
+ * driver (ultrastor.c), various Linux kernel source, the Adaptec EISA
+ * config file (!adp7771.cfg), the Adaptec AHA-2740A Series User's Guide,
+ * the Linux Kernel Hacker's Guide, Writing a SCSI Device Driver for Linux,
+ * the Adaptec 1542 driver (aha1542.c), the Adaptec EISA overlay file
+ * (adp7770.ovl), the Adaptec AHA-2740 Series Technical Reference Manual,
+ * the Adaptec AIC-7770 Data Book, the ANSI SCSI specification, the
+ * ANSI SCSI-2 specification (draft 10c), ...
+ *
+ * --------------------------------------------------------------------------
+ *
+ * Modifications by Daniel M. Eischen (deischen@iworks.InterWorks.org):
+ *
+ * Substantially modified to include support for wide and twin bus
+ * adapters, DMAing of SCBs, tagged queueing, IRQ sharing, bug fixes,
+ * SCB paging, and other rework of the code.
+ *
+ * Parts of this driver were also based on the FreeBSD driver by
+ * Justin T. Gibbs. His copyright follows:
+ *
+ * --------------------------------------------------------------------------
+ * Copyright (c) 1994-1997 Justin Gibbs.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Where this Software is combined with software released under the terms of
+ * the GNU General Public License ("GPL") and the terms of the GPL would require the
+ * combined work to also be released under the terms of the GPL, the terms
+ * and conditions of this License will apply in addition to those of the
+ * GPL with the exception of any terms or conditions of this License that
+ * conflict with, or are expressly prohibited by, the GPL.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: aic7xxx.c,v 1.119 1997/06/27 19:39:18 gibbs Exp $
+ *---------------------------------------------------------------------------
+ *
+ * Thanks also go to (in alphabetical order) the following:
+ *
+ * Rory Bolt - Sequencer bug fixes
+ * Jay Estabrook - Initial DEC Alpha support
+ * Doug Ledford - Much needed abort/reset bug fixes
+ * Kai Makisara - DMAing of SCBs
+ *
+ * A Boot time option was also added for not resetting the scsi bus.
+ *
+ * Form: aic7xxx=extended
+ * aic7xxx=no_reset
+ * aic7xxx=ultra
+ * aic7xxx=irq_trigger:[0,1] # 0 edge, 1 level
+ * aic7xxx=verbose
+ *
+ * Daniel M. Eischen, deischen@iworks.InterWorks.org, 1/23/97
+ *
+ * $Id: aic7xxx.c,v 4.1 1997/06/12 08:23:42 deang Exp $
+ *-M*************************************************************************/
+
+/*+M**************************************************************************
+ *
+ * Further driver modifications made by Doug Ledford <dledford@redhat.com>
+ *
+ * Copyright (c) 1997-1999 Doug Ledford
+ *
+ * These changes are released under the same licensing terms as the FreeBSD
+ * driver written by Justin Gibbs. Please see his Copyright notice above
+ * for the exact terms and conditions covering my changes as well as the
+ * warranty statement.
+ *
+ * Modifications made to the aic7xxx.c,v 4.1 driver from Dan Eischen include
+ * but are not limited to:
+ *
+ * 1: Import of the latest FreeBSD sequencer code for this driver
+ * 2: Modification of kernel code to accommodate different sequencer semantics
+ * 3: Extensive changes throughout kernel portion of driver to improve
+ * abort/reset processing and error hanndling
+ * 4: Other work contributed by various people on the Internet
+ * 5: Changes to printk information and verbosity selection code
+ * 6: General reliability related changes, especially in IRQ management
+ * 7: Modifications to the default probe/attach order for supported cards
+ * 8: SMP friendliness has been improved
+ *
+ * Overall, this driver represents a significant departure from the official
+ * aic7xxx driver released by Dan Eischen in two ways. First, in the code
+ * itself. A diff between the two version of the driver is now a several
+ * thousand line diff. Second, in approach to solving the same problem. The
+ * problem is importing the FreeBSD aic7xxx driver code to linux can be a
+ * difficult and time consuming process, that also can be error prone. Dan
+ * Eischen's official driver uses the approach that the linux and FreeBSD
+ * drivers should be as identical as possible. To that end, his next version
+ * of this driver will be using a mid-layer code library that he is developing
+ * to moderate communications between the linux mid-level SCSI code and the
+ * low level FreeBSD driver. He intends to be able to essentially drop the
+ * FreeBSD driver into the linux kernel with only a few minor tweaks to some
+ * include files and the like and get things working, making for fast easy
+ * imports of the FreeBSD code into linux.
+ *
+ * I disagree with Dan's approach. Not that I don't think his way of doing
+ * things would be nice, easy to maintain, and create a more uniform driver
+ * between FreeBSD and Linux. I have no objection to those issues. My
+ * disagreement is on the needed functionality. There simply are certain
+ * things that are done differently in FreeBSD than linux that will cause
+ * problems for this driver regardless of any middle ware Dan implements.
+ * The biggest example of this at the moment is interrupt semantics. Linux
+ * doesn't provide the same protection techniques as FreeBSD does, nor can
+ * they be easily implemented in any middle ware code since they would truly
+ * belong in the kernel proper and would effect all drivers. For the time
+ * being, I see issues such as these as major stumbling blocks to the
+ * reliability of code based upon such middle ware. Therefore, I choose to
+ * use a different approach to importing the FreeBSD code that doesn't
+ * involve any middle ware type code. My approach is to import the sequencer
+ * code from FreeBSD wholesale. Then, to only make changes in the kernel
+ * portion of the driver as they are needed for the new sequencer semantics.
+ * In this way, the portion of the driver that speaks to the rest of the
+ * linux kernel is fairly static and can be changed/modified to solve
+ * any problems one might encounter without concern for the FreeBSD driver.
+ *
+ * Note: If time and experience should prove me wrong that the middle ware
+ * code Dan writes is reliable in its operation, then I'll retract my above
+ * statements. But, for those that don't know, I'm from Missouri (in the US)
+ * and our state motto is "The Show-Me State". Well, before I will put
+ * faith into it, you'll have to show me that it works :)
+ *
+ *_M*************************************************************************/
+
+/*
+ * The next three defines are user configurable. These should be the only
+ * defines a user might need to get in here and change. There are other
+ * defines buried deeper in the code, but those really shouldn't need touched
+ * under normal conditions.
+ */
+
+/*
+ * AIC7XXX_STRICT_PCI_SETUP
+ * Should we assume the PCI config options on our controllers are set with
+ * sane and proper values, or should we be anal about our PCI config
+ * registers and force them to what we want? The main advantage to
+ * defining this option is on non-Intel hardware where the BIOS may not
+ * have been run to set things up, or if you have one of the BIOSless
+ * Adaptec controllers, such as a 2910, that don't get set up by the
+ * BIOS. However, keep in mind that we really do set the most important
+ * items in the driver regardless of this setting, this only controls some
+ * of the more esoteric PCI options on these cards. In that sense, I
+ * would default to leaving this off. However, if people wish to try
+ * things both ways, that would also help me to know if there are some
+ * machines where it works one way but not another.
+ *
+ * -- July 7, 17:09
+ * OK...I need this on my machine for testing, so the default is to
+ * leave it defined.
+ *
+ * -- July 7, 18:49
+ * I needed it for testing, but it didn't make any difference, so back
+ * off she goes.
+ *
+ * -- July 16, 23:04
+ * I turned it back on to try and compensate for the 2.1.x PCI code
+ * which no longer relies solely on the BIOS and now tries to set
+ * things itself.
+ */
+
+#define AIC7XXX_STRICT_PCI_SETUP
+
+/*
+ * AIC7XXX_VERBOSE_DEBUGGING
+ * This option enables a lot of extra printk();s in the code, surrounded
+ * by if (aic7xxx_verbose ...) statements. Executing all of those if
+ * statements and the extra checks can get to where it actually does have
+ * an impact on CPU usage and such, as well as code size. Disabling this
+ * define will keep some of those from becoming part of the code.
+ *
+ * NOTE: Currently, this option has no real effect, I will be adding the
+ * various #ifdef's in the code later when I've decided a section is
+ * complete and no longer needs debugging. OK...a lot of things are now
+ * surrounded by this define, so turning this off does have an impact.
+ */
+
+/*
+ * #define AIC7XXX_VERBOSE_DEBUGGING
+ */
+
+#include <linux/module.h>
+#include <stdarg.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "aic7xxx_old/aic7xxx.h"
+
+#include "aic7xxx_old/sequencer.h"
+#include "aic7xxx_old/scsi_message.h"
+#include "aic7xxx_old/aic7xxx_reg.h"
+#include <scsi/scsicam.h>
+
+#include <linux/stat.h>
+#include <linux/slab.h> /* for kmalloc() */
+
+#include <linux/config.h> /* for CONFIG_PCI */
+
+#define AIC7XXX_C_VERSION "5.2.6"
+
+#define ALL_TARGETS -1
+#define ALL_CHANNELS -1
+#define ALL_LUNS -1
+#define MAX_TARGETS 16
+#define MAX_LUNS 8
+#ifndef TRUE
+# define TRUE 1
+#endif
+#ifndef FALSE
+# define FALSE 0
+#endif
+
+#if defined(__powerpc__) || defined(__i386__) || defined(__x86_64__)
+# define MMAPIO
+#endif
+
+/*
+ * You can try raising me for better performance or lowering me if you have
+ * flaky devices that go off the scsi bus when hit with too many tagged
+ * commands (like some IBM SCSI-3 LVD drives).
+ */
+#define AIC7XXX_CMDS_PER_DEVICE 32
+
+typedef struct
+{
+ unsigned char tag_commands[16]; /* Allow for wide/twin adapters. */
+} adapter_tag_info_t;
+
+/*
+ * Make a define that will tell the driver not to the default tag depth
+ * everywhere.
+ */
+#define DEFAULT_TAG_COMMANDS {0, 0, 0, 0, 0, 0, 0, 0,\
+ 0, 0, 0, 0, 0, 0, 0, 0}
+
+/*
+ * Modify this as you see fit for your system. By setting tag_commands
+ * to 0, the driver will use it's own algorithm for determining the
+ * number of commands to use (see above). When 255, the driver will
+ * not enable tagged queueing for that particular device. When positive
+ * (> 0) and (< 255) the values in the array are used for the queue_depth.
+ * Note that the maximum value for an entry is 254, but you're insane if
+ * you try to use that many commands on one device.
+ *
+ * In this example, the first line will disable tagged queueing for all
+ * the devices on the first probed aic7xxx adapter.
+ *
+ * The second line enables tagged queueing with 4 commands/LUN for IDs
+ * (1, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
+ * driver to use its own algorithm for ID 1.
+ *
+ * The third line is the same as the first line.
+ *
+ * The fourth line disables tagged queueing for devices 0 and 3. It
+ * enables tagged queueing for the other IDs, with 16 commands/LUN
+ * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
+ * IDs 2, 5-7, and 9-15.
+ */
+
+/*
+ * NOTE: The below structure is for reference only, the actual structure
+ * to modify in order to change things is found after this fake one.
+ *
+adapter_tag_info_t aic7xxx_tag_info[] =
+{
+ {DEFAULT_TAG_COMMANDS},
+ {{4, 0, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 255, 4, 4, 4}},
+ {DEFAULT_TAG_COMMANDS},
+ {{255, 16, 4, 255, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
+};
+*/
+
+static adapter_tag_info_t aic7xxx_tag_info[] =
+{
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS},
+ {DEFAULT_TAG_COMMANDS}
+};
+
+
+/*
+ * Define an array of board names that can be indexed by aha_type.
+ * Don't forget to change this when changing the types!
+ */
+static const char *board_names[] = {
+ "AIC-7xxx Unknown", /* AIC_NONE */
+ "Adaptec AIC-7810 Hardware RAID Controller", /* AIC_7810 */
+ "Adaptec AIC-7770 SCSI host adapter", /* AIC_7770 */
+ "Adaptec AHA-274X SCSI host adapter", /* AIC_7771 */
+ "Adaptec AHA-284X SCSI host adapter", /* AIC_284x */
+ "Adaptec AIC-7850 SCSI host adapter", /* AIC_7850 */
+ "Adaptec AIC-7855 SCSI host adapter", /* AIC_7855 */
+ "Adaptec AIC-7860 Ultra SCSI host adapter", /* AIC_7860 */
+ "Adaptec AHA-2940A Ultra SCSI host adapter", /* AIC_7861 */
+ "Adaptec AIC-7870 SCSI host adapter", /* AIC_7870 */
+ "Adaptec AHA-294X SCSI host adapter", /* AIC_7871 */
+ "Adaptec AHA-394X SCSI host adapter", /* AIC_7872 */
+ "Adaptec AHA-398X SCSI host adapter", /* AIC_7873 */
+ "Adaptec AHA-2944 SCSI host adapter", /* AIC_7874 */
+ "Adaptec AIC-7880 Ultra SCSI host adapter", /* AIC_7880 */
+ "Adaptec AHA-294X Ultra SCSI host adapter", /* AIC_7881 */
+ "Adaptec AHA-394X Ultra SCSI host adapter", /* AIC_7882 */
+ "Adaptec AHA-398X Ultra SCSI host adapter", /* AIC_7883 */
+ "Adaptec AHA-2944 Ultra SCSI host adapter", /* AIC_7884 */
+ "Adaptec AHA-2940UW Pro Ultra SCSI host adapter", /* AIC_7887 */
+ "Adaptec AIC-7895 Ultra SCSI host adapter", /* AIC_7895 */
+ "Adaptec AIC-7890/1 Ultra2 SCSI host adapter", /* AIC_7890 */
+ "Adaptec AHA-293X Ultra2 SCSI host adapter", /* AIC_7890 */
+ "Adaptec AHA-294X Ultra2 SCSI host adapter", /* AIC_7890 */
+ "Adaptec AIC-7896/7 Ultra2 SCSI host adapter", /* AIC_7896 */
+ "Adaptec AHA-394X Ultra2 SCSI host adapter", /* AIC_7897 */
+ "Adaptec AHA-395X Ultra2 SCSI host adapter", /* AIC_7897 */
+ "Adaptec PCMCIA SCSI controller", /* card bus stuff */
+ "Adaptec AIC-7892 Ultra 160/m SCSI host adapter", /* AIC_7892 */
+ "Adaptec AIC-7899 Ultra 160/m SCSI host adapter", /* AIC_7899 */
+};
+
+/*
+ * There should be a specific return value for this in scsi.h, but
+ * it seems that most drivers ignore it.
+ */
+#define DID_UNDERFLOW DID_ERROR
+
+/*
+ * What we want to do is have the higher level scsi driver requeue
+ * the command to us. There is no specific driver status for this
+ * condition, but the higher level scsi driver will requeue the
+ * command on a DID_BUS_BUSY error.
+ *
+ * Upon further inspection and testing, it seems that DID_BUS_BUSY
+ * will *always* retry the command. We can get into an infinite loop
+ * if this happens when we really want some sort of counter that
+ * will automatically abort/reset the command after so many retries.
+ * Using DID_ERROR will do just that. (Made by a suggestion by
+ * Doug Ledford 8/1/96)
+ */
+#define DID_RETRY_COMMAND DID_ERROR
+
+#define HSCSIID 0x07
+#define SCSI_RESET 0x040
+
+/*
+ * EISA/VL-bus stuff
+ */
+#define MINSLOT 1
+#define MAXSLOT 15
+#define SLOTBASE(x) ((x) << 12)
+#define BASE_TO_SLOT(x) ((x) >> 12)
+
+/*
+ * Standard EISA Host ID regs (Offset from slot base)
+ */
+#define AHC_HID0 0x80 /* 0,1: msb of ID2, 2-7: ID1 */
+#define AHC_HID1 0x81 /* 0-4: ID3, 5-7: LSB ID2 */
+#define AHC_HID2 0x82 /* product */
+#define AHC_HID3 0x83 /* firmware revision */
+
+/*
+ * AIC-7770 I/O range to reserve for a card
+ */
+#define MINREG 0xC00
+#define MAXREG 0xCFF
+
+#define INTDEF 0x5C /* Interrupt Definition Register */
+
+/*
+ * AIC-78X0 PCI registers
+ */
+#define CLASS_PROGIF_REVID 0x08
+#define DEVREVID 0x000000FFul
+#define PROGINFC 0x0000FF00ul
+#define SUBCLASS 0x00FF0000ul
+#define BASECLASS 0xFF000000ul
+
+#define CSIZE_LATTIME 0x0C
+#define CACHESIZE 0x0000003Ful /* only 5 bits */
+#define LATTIME 0x0000FF00ul
+
+#define DEVCONFIG 0x40
+#define SCBSIZE32 0x00010000ul /* aic789X only */
+#define MPORTMODE 0x00000400ul /* aic7870 only */
+#define RAMPSM 0x00000200ul /* aic7870 only */
+#define RAMPSM_ULTRA2 0x00000004
+#define VOLSENSE 0x00000100ul
+#define SCBRAMSEL 0x00000080ul
+#define SCBRAMSEL_ULTRA2 0x00000008
+#define MRDCEN 0x00000040ul
+#define EXTSCBTIME 0x00000020ul /* aic7870 only */
+#define EXTSCBPEN 0x00000010ul /* aic7870 only */
+#define BERREN 0x00000008ul
+#define DACEN 0x00000004ul
+#define STPWLEVEL 0x00000002ul
+#define DIFACTNEGEN 0x00000001ul /* aic7870 only */
+
+#define SCAMCTL 0x1a /* Ultra2 only */
+#define CCSCBBADDR 0xf0 /* aic7895/6/7 */
+
+/*
+ * Define the different types of SEEPROMs on aic7xxx adapters
+ * and make it also represent the address size used in accessing
+ * its registers. The 93C46 chips have 1024 bits organized into
+ * 64 16-bit words, while the 93C56 chips have 2048 bits organized
+ * into 128 16-bit words. The C46 chips use 6 bits to address
+ * each word, while the C56 and C66 (4096 bits) use 8 bits to
+ * address each word.
+ */
+typedef enum {C46 = 6, C56_66 = 8} seeprom_chip_type;
+
+/*
+ *
+ * Define the format of the SEEPROM registers (16 bits).
+ *
+ */
+struct seeprom_config {
+
+/*
+ * SCSI ID Configuration Flags
+ */
+#define CFXFER 0x0007 /* synchronous transfer rate */
+#define CFSYNCH 0x0008 /* enable synchronous transfer */
+#define CFDISC 0x0010 /* enable disconnection */
+#define CFWIDEB 0x0020 /* wide bus device (wide card) */
+#define CFSYNCHISULTRA 0x0040 /* CFSYNC is an ultra offset */
+#define CFNEWULTRAFORMAT 0x0080 /* Use the Ultra2 SEEPROM format */
+#define CFSTART 0x0100 /* send start unit SCSI command */
+#define CFINCBIOS 0x0200 /* include in BIOS scan */
+#define CFRNFOUND 0x0400 /* report even if not found */
+#define CFMULTILUN 0x0800 /* probe mult luns in BIOS scan */
+#define CFWBCACHEYES 0x4000 /* Enable W-Behind Cache on drive */
+#define CFWBCACHENC 0xc000 /* Don't change W-Behind Cache */
+/* UNUSED 0x3000 */
+ unsigned short device_flags[16]; /* words 0-15 */
+
+/*
+ * BIOS Control Bits
+ */
+#define CFSUPREM 0x0001 /* support all removable drives */
+#define CFSUPREMB 0x0002 /* support removable drives for boot only */
+#define CFBIOSEN 0x0004 /* BIOS enabled */
+/* UNUSED 0x0008 */
+#define CFSM2DRV 0x0010 /* support more than two drives */
+#define CF284XEXTEND 0x0020 /* extended translation (284x cards) */
+/* UNUSED 0x0040 */
+#define CFEXTEND 0x0080 /* extended translation enabled */
+/* UNUSED 0xFF00 */
+ unsigned short bios_control; /* word 16 */
+
+/*
+ * Host Adapter Control Bits
+ */
+#define CFAUTOTERM 0x0001 /* Perform Auto termination */
+#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable (Ultra cards) */
+#define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */
+#define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */
+#define CFSTERM 0x0004 /* SCSI low byte termination */
+#define CFWSTERM 0x0008 /* SCSI high byte termination (wide card) */
+#define CFSPARITY 0x0010 /* SCSI parity */
+#define CF284XSTERM 0x0020 /* SCSI low byte termination (284x cards) */
+#define CFRESETB 0x0040 /* reset SCSI bus at boot */
+#define CFBPRIMARY 0x0100 /* Channel B primary on 7895 chipsets */
+#define CFSEAUTOTERM 0x0400 /* aic7890 Perform SE Auto Term */
+#define CFLVDSTERM 0x0800 /* aic7890 LVD Termination */
+/* UNUSED 0xF280 */
+ unsigned short adapter_control; /* word 17 */
+
+/*
+ * Bus Release, Host Adapter ID
+ */
+#define CFSCSIID 0x000F /* host adapter SCSI ID */
+/* UNUSED 0x00F0 */
+#define CFBRTIME 0xFF00 /* bus release time */
+ unsigned short brtime_id; /* word 18 */
+
+/*
+ * Maximum targets
+ */
+#define CFMAXTARG 0x00FF /* maximum targets */
+/* UNUSED 0xFF00 */
+ unsigned short max_targets; /* word 19 */
+
+ unsigned short res_1[11]; /* words 20-30 */
+ unsigned short checksum; /* word 31 */
+};
+
+#define SELBUS_MASK 0x0a
+#define SELNARROW 0x00
+#define SELBUSB 0x08
+#define SINGLE_BUS 0x00
+
+#define SCB_TARGET(scb) \
+ (((scb)->hscb->target_channel_lun & TID) >> 4)
+#define SCB_LUN(scb) \
+ ((scb)->hscb->target_channel_lun & LID)
+#define SCB_IS_SCSIBUS_B(scb) \
+ (((scb)->hscb->target_channel_lun & SELBUSB) != 0)
+
+/*
+ * If an error occurs during a data transfer phase, run the command
+ * to completion - it's easier that way - making a note of the error
+ * condition in this location. This then will modify a DID_OK status
+ * into an appropriate error for the higher-level SCSI code.
+ */
+#define aic7xxx_error(cmd) ((cmd)->SCp.Status)
+
+/*
+ * Keep track of the targets returned status.
+ */
+#define aic7xxx_status(cmd) ((cmd)->SCp.sent_command)
+
+/*
+ * The position of the SCSI commands scb within the scb array.
+ */
+#define aic7xxx_position(cmd) ((cmd)->SCp.have_data_in)
+
+/*
+ * The stored DMA mapping for single-buffer data transfers.
+ */
+#define aic7xxx_mapping(cmd) ((cmd)->SCp.phase)
+
+/*
+ * Get out private data area from a scsi cmd pointer
+ */
+#define AIC_DEV(cmd) ((struct aic_dev_data *)(cmd)->device->hostdata)
+
+/*
+ * So we can keep track of our host structs
+ */
+static struct aic7xxx_host *first_aic7xxx = NULL;
+
+/*
+ * As of Linux 2.1, the mid-level SCSI code uses virtual addresses
+ * in the scatter-gather lists. We need to convert the virtual
+ * addresses to physical addresses.
+ */
+struct hw_scatterlist {
+ unsigned int address;
+ unsigned int length;
+};
+
+/*
+ * Maximum number of SG segments these cards can support.
+ */
+#define AIC7XXX_MAX_SG 128
+
+/*
+ * The maximum number of SCBs we could have for ANY type
+ * of card. DON'T FORGET TO CHANGE THE SCB MASK IN THE
+ * SEQUENCER CODE IF THIS IS MODIFIED!
+ */
+#define AIC7XXX_MAXSCB 255
+
+
+struct aic7xxx_hwscb {
+/* ------------ Begin hardware supported fields ---------------- */
+/* 0*/ unsigned char control;
+/* 1*/ unsigned char target_channel_lun; /* 4/1/3 bits */
+/* 2*/ unsigned char target_status;
+/* 3*/ unsigned char SG_segment_count;
+/* 4*/ unsigned int SG_list_pointer;
+/* 8*/ unsigned char residual_SG_segment_count;
+/* 9*/ unsigned char residual_data_count[3];
+/*12*/ unsigned int data_pointer;
+/*16*/ unsigned int data_count;
+/*20*/ unsigned int SCSI_cmd_pointer;
+/*24*/ unsigned char SCSI_cmd_length;
+/*25*/ unsigned char tag; /* Index into our kernel SCB array.
+ * Also used as the tag for tagged I/O
+ */
+#define SCB_PIO_TRANSFER_SIZE 26 /* amount we need to upload/download
+ * via PIO to initialize a transaction.
+ */
+/*26*/ unsigned char next; /* Used to thread SCBs awaiting selection
+ * or disconnected down in the sequencer.
+ */
+/*27*/ unsigned char prev;
+/*28*/ unsigned int pad; /*
+ * Unused by the kernel, but we require
+ * the padding so that the array of
+ * hardware SCBs is aligned on 32 byte
+ * boundaries so the sequencer can index
+ */
+};
+
+typedef enum {
+ SCB_FREE = 0x0000,
+ SCB_DTR_SCB = 0x0001,
+ SCB_WAITINGQ = 0x0002,
+ SCB_ACTIVE = 0x0004,
+ SCB_SENSE = 0x0008,
+ SCB_ABORT = 0x0010,
+ SCB_DEVICE_RESET = 0x0020,
+ SCB_RESET = 0x0040,
+ SCB_RECOVERY_SCB = 0x0080,
+ SCB_MSGOUT_PPR = 0x0100,
+ SCB_MSGOUT_SENT = 0x0200,
+ SCB_MSGOUT_SDTR = 0x0400,
+ SCB_MSGOUT_WDTR = 0x0800,
+ SCB_MSGOUT_BITS = SCB_MSGOUT_PPR |
+ SCB_MSGOUT_SENT |
+ SCB_MSGOUT_SDTR |
+ SCB_MSGOUT_WDTR,
+ SCB_QUEUED_ABORT = 0x1000,
+ SCB_QUEUED_FOR_DONE = 0x2000,
+ SCB_WAS_BUSY = 0x4000,
+ SCB_QUEUE_FULL = 0x8000
+} scb_flag_type;
+
+typedef enum {
+ AHC_FNONE = 0x00000000,
+ AHC_PAGESCBS = 0x00000001,
+ AHC_CHANNEL_B_PRIMARY = 0x00000002,
+ AHC_USEDEFAULTS = 0x00000004,
+ AHC_INDIRECT_PAGING = 0x00000008,
+ AHC_CHNLB = 0x00000020,
+ AHC_CHNLC = 0x00000040,
+ AHC_EXTEND_TRANS_A = 0x00000100,
+ AHC_EXTEND_TRANS_B = 0x00000200,
+ AHC_TERM_ENB_A = 0x00000400,
+ AHC_TERM_ENB_SE_LOW = 0x00000400,
+ AHC_TERM_ENB_B = 0x00000800,
+ AHC_TERM_ENB_SE_HIGH = 0x00000800,
+ AHC_HANDLING_REQINITS = 0x00001000,
+ AHC_TARGETMODE = 0x00002000,
+ AHC_NEWEEPROM_FMT = 0x00004000,
+ /*
+ * Here ends the FreeBSD defined flags and here begins the linux defined
+ * flags. NOTE: I did not preserve the old flag name during this change
+ * specifically to force me to evaluate what flags were being used properly
+ * and what flags weren't. This way, I could clean up the flag usage on
+ * a use by use basis. Doug Ledford
+ */
+ AHC_MOTHERBOARD = 0x00020000,
+ AHC_NO_STPWEN = 0x00040000,
+ AHC_RESET_DELAY = 0x00080000,
+ AHC_A_SCANNED = 0x00100000,
+ AHC_B_SCANNED = 0x00200000,
+ AHC_MULTI_CHANNEL = 0x00400000,
+ AHC_BIOS_ENABLED = 0x00800000,
+ AHC_SEEPROM_FOUND = 0x01000000,
+ AHC_TERM_ENB_LVD = 0x02000000,
+ AHC_ABORT_PENDING = 0x04000000,
+ AHC_RESET_PENDING = 0x08000000,
+#define AHC_IN_ISR_BIT 28
+ AHC_IN_ISR = 0x10000000,
+ AHC_IN_ABORT = 0x20000000,
+ AHC_IN_RESET = 0x40000000,
+ AHC_EXTERNAL_SRAM = 0x80000000
+} ahc_flag_type;
+
+typedef enum {
+ AHC_NONE = 0x0000,
+ AHC_CHIPID_MASK = 0x00ff,
+ AHC_AIC7770 = 0x0001,
+ AHC_AIC7850 = 0x0002,
+ AHC_AIC7860 = 0x0003,
+ AHC_AIC7870 = 0x0004,
+ AHC_AIC7880 = 0x0005,
+ AHC_AIC7890 = 0x0006,
+ AHC_AIC7895 = 0x0007,
+ AHC_AIC7896 = 0x0008,
+ AHC_AIC7892 = 0x0009,
+ AHC_AIC7899 = 0x000a,
+ AHC_VL = 0x0100,
+ AHC_EISA = 0x0200,
+ AHC_PCI = 0x0400,
+} ahc_chip;
+
+typedef enum {
+ AHC_FENONE = 0x0000,
+ AHC_ULTRA = 0x0001,
+ AHC_ULTRA2 = 0x0002,
+ AHC_WIDE = 0x0004,
+ AHC_TWIN = 0x0008,
+ AHC_MORE_SRAM = 0x0010,
+ AHC_CMD_CHAN = 0x0020,
+ AHC_QUEUE_REGS = 0x0040,
+ AHC_SG_PRELOAD = 0x0080,
+ AHC_SPIOCAP = 0x0100,
+ AHC_ULTRA3 = 0x0200,
+ AHC_NEW_AUTOTERM = 0x0400,
+ AHC_AIC7770_FE = AHC_FENONE,
+ AHC_AIC7850_FE = AHC_SPIOCAP,
+ AHC_AIC7860_FE = AHC_ULTRA|AHC_SPIOCAP,
+ AHC_AIC7870_FE = AHC_FENONE,
+ AHC_AIC7880_FE = AHC_ULTRA,
+ AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2|
+ AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_NEW_AUTOTERM,
+ AHC_AIC7895_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA,
+ AHC_AIC7896_FE = AHC_AIC7890_FE,
+ AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_ULTRA3,
+ AHC_AIC7899_FE = AHC_AIC7890_FE|AHC_ULTRA3,
+} ahc_feature;
+
+#define SCB_DMA_ADDR(scb, addr) ((unsigned long)(addr) + (scb)->scb_dma->dma_offset)
+
+struct aic7xxx_scb_dma {
+ unsigned long dma_offset; /* Correction you have to add
+ * to virtual address to get
+ * dma handle in this region */
+ dma_addr_t dma_address; /* DMA handle of the start,
+ * for unmap */
+ unsigned int dma_len; /* DMA length */
+};
+
+typedef enum {
+ AHC_BUG_NONE = 0x0000,
+ AHC_BUG_TMODE_WIDEODD = 0x0001,
+ AHC_BUG_AUTOFLUSH = 0x0002,
+ AHC_BUG_CACHETHEN = 0x0004,
+ AHC_BUG_CACHETHEN_DIS = 0x0008,
+ AHC_BUG_PCI_2_1_RETRY = 0x0010,
+ AHC_BUG_PCI_MWI = 0x0020,
+ AHC_BUG_SCBCHAN_UPLOAD = 0x0040,
+} ahc_bugs;
+
+struct aic7xxx_scb {
+ struct aic7xxx_hwscb *hscb; /* corresponding hardware scb */
+ Scsi_Cmnd *cmd; /* Scsi_Cmnd for this scb */
+ struct aic7xxx_scb *q_next; /* next scb in queue */
+ volatile scb_flag_type flags; /* current state of scb */
+ struct hw_scatterlist *sg_list; /* SG list in adapter format */
+ unsigned char tag_action;
+ unsigned char sg_count;
+ unsigned char *sense_cmd; /*
+ * Allocate 6 characters for
+ * sense command.
+ */
+ unsigned char *cmnd;
+ unsigned int sg_length; /* We init this during buildscb so we
+ * don't have to calculate anything
+ * during underflow/overflow/stat code
+ */
+ void *kmalloc_ptr;
+ struct aic7xxx_scb_dma *scb_dma;
+};
+
+/*
+ * Define a linked list of SCBs.
+ */
+typedef struct {
+ struct aic7xxx_scb *head;
+ struct aic7xxx_scb *tail;
+} scb_queue_type;
+
+static struct {
+ unsigned char errno;
+ const char *errmesg;
+} hard_error[] = {
+ { ILLHADDR, "Illegal Host Access" },
+ { ILLSADDR, "Illegal Sequencer Address referenced" },
+ { ILLOPCODE, "Illegal Opcode in sequencer program" },
+ { SQPARERR, "Sequencer Ram Parity Error" },
+ { DPARERR, "Data-Path Ram Parity Error" },
+ { MPARERR, "Scratch Ram/SCB Array Ram Parity Error" },
+ { PCIERRSTAT,"PCI Error detected" },
+ { CIOPARERR, "CIOBUS Parity Error" }
+};
+
+static unsigned char
+generic_sense[] = { REQUEST_SENSE, 0, 0, 0, 255, 0 };
+
+typedef struct {
+ scb_queue_type free_scbs; /*
+ * SCBs assigned to free slot on
+ * card (no paging required)
+ */
+ struct aic7xxx_scb *scb_array[AIC7XXX_MAXSCB];
+ struct aic7xxx_hwscb *hscbs;
+ unsigned char numscbs; /* current number of scbs */
+ unsigned char maxhscbs; /* hardware scbs */
+ unsigned char maxscbs; /* max scbs including pageable scbs */
+ dma_addr_t hscbs_dma; /* DMA handle to hscbs */
+ unsigned int hscbs_dma_len; /* length of the above DMA area */
+ void *hscb_kmalloc_ptr;
+} scb_data_type;
+
+struct target_cmd {
+ unsigned char mesg_bytes[4];
+ unsigned char command[28];
+};
+
+#define AHC_TRANS_CUR 0x0001
+#define AHC_TRANS_ACTIVE 0x0002
+#define AHC_TRANS_GOAL 0x0004
+#define AHC_TRANS_USER 0x0008
+#define AHC_TRANS_QUITE 0x0010
+typedef struct {
+ unsigned char width;
+ unsigned char period;
+ unsigned char offset;
+ unsigned char options;
+} transinfo_type;
+
+struct aic_dev_data {
+ volatile scb_queue_type delayed_scbs;
+ volatile unsigned short temp_q_depth;
+ unsigned short max_q_depth;
+ volatile unsigned char active_cmds;
+ /*
+ * Statistics Kept:
+ *
+ * Total Xfers (count for each command that has a data xfer),
+ * broken down by reads && writes.
+ *
+ * Further sorted into a few bins for keeping tabs on how many commands
+ * we get of various sizes.
+ *
+ */
+ long w_total; /* total writes */
+ long r_total; /* total reads */
+ long barrier_total; /* total num of REQ_BARRIER commands */
+ long ordered_total; /* How many REQ_BARRIER commands we
+ used ordered tags to satisfy */
+ long w_bins[6]; /* binned write */
+ long r_bins[6]; /* binned reads */
+ transinfo_type cur;
+ transinfo_type goal;
+#define BUS_DEVICE_RESET_PENDING 0x01
+#define DEVICE_RESET_DELAY 0x02
+#define DEVICE_PRINT_DTR 0x04
+#define DEVICE_WAS_BUSY 0x08
+#define DEVICE_DTR_SCANNED 0x10
+#define DEVICE_SCSI_3 0x20
+ volatile unsigned char flags;
+ unsigned needppr:1;
+ unsigned needppr_copy:1;
+ unsigned needsdtr:1;
+ unsigned needsdtr_copy:1;
+ unsigned needwdtr:1;
+ unsigned needwdtr_copy:1;
+ unsigned dtr_pending:1;
+ struct scsi_device *SDptr;
+ struct list_head list;
+};
+
+/*
+ * Define a structure used for each host adapter. Note, in order to avoid
+ * problems with architectures I can't test on (because I don't have one,
+ * such as the Alpha based systems) which happen to give faults for
+ * non-aligned memory accesses, care was taken to align this structure
+ * in a way that gauranteed all accesses larger than 8 bits were aligned
+ * on the appropriate boundary. It's also organized to try and be more
+ * cache line efficient. Be careful when changing this lest you might hurt
+ * overall performance and bring down the wrath of the masses.
+ */
+struct aic7xxx_host {
+ /*
+ * This is the first 64 bytes in the host struct
+ */
+
+ /*
+ * We are grouping things here....first, items that get either read or
+ * written with nearly every interrupt
+ */
+ volatile long flags;
+ ahc_feature features; /* chip features */
+ unsigned long base; /* card base address */
+ volatile unsigned char __iomem *maddr; /* memory mapped address */
+ unsigned long isr_count; /* Interrupt count */
+ unsigned long spurious_int;
+ scb_data_type *scb_data;
+ struct aic7xxx_cmd_queue {
+ Scsi_Cmnd *head;
+ Scsi_Cmnd *tail;
+ } completeq;
+
+ /*
+ * Things read/written on nearly every entry into aic7xxx_queue()
+ */
+ volatile scb_queue_type waiting_scbs;
+ unsigned char unpause; /* unpause value for HCNTRL */
+ unsigned char pause; /* pause value for HCNTRL */
+ volatile unsigned char qoutfifonext;
+ volatile unsigned char activescbs; /* active scbs */
+ volatile unsigned char max_activescbs;
+ volatile unsigned char qinfifonext;
+ volatile unsigned char *untagged_scbs;
+ volatile unsigned char *qoutfifo;
+ volatile unsigned char *qinfifo;
+
+ unsigned char dev_last_queue_full[MAX_TARGETS];
+ unsigned char dev_last_queue_full_count[MAX_TARGETS];
+ unsigned short ultraenb; /* Gets downloaded to card as a
+ bitmap */
+ unsigned short discenable; /* Gets downloaded to card as a
+ bitmap */
+ transinfo_type user[MAX_TARGETS];
+
+ unsigned char msg_buf[13]; /* The message for the target */
+ unsigned char msg_type;
+#define MSG_TYPE_NONE 0x00
+#define MSG_TYPE_INITIATOR_MSGOUT 0x01
+#define MSG_TYPE_INITIATOR_MSGIN 0x02
+ unsigned char msg_len; /* Length of message */
+ unsigned char msg_index; /* Index into msg_buf array */
+
+
+ /*
+ * We put the less frequently used host structure items after the more
+ * frequently used items to try and ease the burden on the cache subsystem.
+ * These entries are not *commonly* accessed, whereas the preceding entries
+ * are accessed very often.
+ */
+
+ unsigned int irq; /* IRQ for this adapter */
+ int instance; /* aic7xxx instance number */
+ int scsi_id; /* host adapter SCSI ID */
+ int scsi_id_b; /* channel B for twin adapters */
+ unsigned int bios_address;
+ int board_name_index;
+ unsigned short bios_control; /* bios control - SEEPROM */
+ unsigned short adapter_control; /* adapter control - SEEPROM */
+ struct pci_dev *pdev;
+ unsigned char pci_bus;
+ unsigned char pci_device_fn;
+ struct seeprom_config sc;
+ unsigned short sc_type;
+ unsigned short sc_size;
+ struct aic7xxx_host *next; /* allow for multiple IRQs */
+ struct Scsi_Host *host; /* pointer to scsi host */
+ struct list_head aic_devs; /* all aic_dev structs on host */
+ int host_no; /* SCSI host number */
+ unsigned long mbase; /* I/O memory address */
+ ahc_chip chip; /* chip type */
+ ahc_bugs bugs;
+ dma_addr_t fifo_dma; /* DMA handle for fifo arrays */
+
+};
+
+/*
+ * Valid SCSIRATE values. (p. 3-17)
+ * Provides a mapping of transfer periods in ns/4 to the proper value to
+ * stick in the SCSIRATE reg to use that transfer rate.
+ */
+#define AHC_SYNCRATE_ULTRA3 0
+#define AHC_SYNCRATE_ULTRA2 1
+#define AHC_SYNCRATE_ULTRA 3
+#define AHC_SYNCRATE_FAST 6
+#define AHC_SYNCRATE_CRC 0x40
+#define AHC_SYNCRATE_SE 0x10
+static struct aic7xxx_syncrate {
+ /* Rates in Ultra mode have bit 8 of sxfr set */
+#define ULTRA_SXFR 0x100
+ int sxfr_ultra2;
+ int sxfr;
+ unsigned char period;
+ const char *rate[2];
+} aic7xxx_syncrates[] = {
+ { 0x42, 0x000, 9, {"80.0", "160.0"} },
+ { 0x13, 0x000, 10, {"40.0", "80.0"} },
+ { 0x14, 0x000, 11, {"33.0", "66.6"} },
+ { 0x15, 0x100, 12, {"20.0", "40.0"} },
+ { 0x16, 0x110, 15, {"16.0", "32.0"} },
+ { 0x17, 0x120, 18, {"13.4", "26.8"} },
+ { 0x18, 0x000, 25, {"10.0", "20.0"} },
+ { 0x19, 0x010, 31, {"8.0", "16.0"} },
+ { 0x1a, 0x020, 37, {"6.67", "13.3"} },
+ { 0x1b, 0x030, 43, {"5.7", "11.4"} },
+ { 0x10, 0x040, 50, {"5.0", "10.0"} },
+ { 0x00, 0x050, 56, {"4.4", "8.8" } },
+ { 0x00, 0x060, 62, {"4.0", "8.0" } },
+ { 0x00, 0x070, 68, {"3.6", "7.2" } },
+ { 0x00, 0x000, 0, {NULL, NULL} },
+};
+
+#define CTL_OF_SCB(scb) (((scb->hscb)->target_channel_lun >> 3) & 0x1), \
+ (((scb->hscb)->target_channel_lun >> 4) & 0xf), \
+ ((scb->hscb)->target_channel_lun & 0x07)
+
+#define CTL_OF_CMD(cmd) ((cmd->device->channel) & 0x01), \
+ ((cmd->device->id) & 0x0f), \
+ ((cmd->device->lun) & 0x07)
+
+#define TARGET_INDEX(cmd) ((cmd)->device->id | ((cmd)->device->channel << 3))
+
+/*
+ * A nice little define to make doing our printks a little easier
+ */
+
+#define WARN_LEAD KERN_WARNING "(scsi%d:%d:%d:%d) "
+#define INFO_LEAD KERN_INFO "(scsi%d:%d:%d:%d) "
+
+/*
+ * XXX - these options apply unilaterally to _all_ 274x/284x/294x
+ * cards in the system. This should be fixed. Exceptions to this
+ * rule are noted in the comments.
+ */
+
+/*
+ * Use this as the default queue depth when setting tagged queueing on.
+ */
+static unsigned int aic7xxx_default_queue_depth = AIC7XXX_CMDS_PER_DEVICE;
+
+/*
+ * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
+ * has no effect on any later resets that might occur due to things like
+ * SCSI bus timeouts.
+ */
+static unsigned int aic7xxx_no_reset = 0;
+/*
+ * Certain PCI motherboards will scan PCI devices from highest to lowest,
+ * others scan from lowest to highest, and they tend to do all kinds of
+ * strange things when they come into contact with PCI bridge chips. The
+ * net result of all this is that the PCI card that is actually used to boot
+ * the machine is very hard to detect. Most motherboards go from lowest
+ * PCI slot number to highest, and the first SCSI controller found is the
+ * one you boot from. The only exceptions to this are when a controller
+ * has its BIOS disabled. So, we by default sort all of our SCSI controllers
+ * from lowest PCI slot number to highest PCI slot number. We also force
+ * all controllers with their BIOS disabled to the end of the list. This
+ * works on *almost* all computers. Where it doesn't work, we have this
+ * option. Setting this option to non-0 will reverse the order of the sort
+ * to highest first, then lowest, but will still leave cards with their BIOS
+ * disabled at the very end. That should fix everyone up unless there are
+ * really strange cirumstances.
+ */
+static int aic7xxx_reverse_scan = 0;
+/*
+ * Should we force EXTENDED translation on a controller.
+ * 0 == Use whatever is in the SEEPROM or default to off
+ * 1 == Use whatever is in the SEEPROM or default to on
+ */
+static unsigned int aic7xxx_extended = 0;
+/*
+ * The IRQ trigger method used on EISA controllers. Does not effect PCI cards.
+ * -1 = Use detected settings.
+ * 0 = Force Edge triggered mode.
+ * 1 = Force Level triggered mode.
+ */
+static int aic7xxx_irq_trigger = -1;
+/*
+ * This variable is used to override the termination settings on a controller.
+ * This should not be used under normal conditions. However, in the case
+ * that a controller does not have a readable SEEPROM (so that we can't
+ * read the SEEPROM settings directly) and that a controller has a buggered
+ * version of the cable detection logic, this can be used to force the
+ * correct termination. It is preferable to use the manual termination
+ * settings in the BIOS if possible, but some motherboard controllers store
+ * those settings in a format we can't read. In other cases, auto term
+ * should also work, but the chipset was put together with no auto term
+ * logic (common on motherboard controllers). In those cases, we have
+ * 32 bits here to work with. That's good for 8 controllers/channels. The
+ * bits are organized as 4 bits per channel, with scsi0 getting the lowest
+ * 4 bits in the int. A 1 in a bit position indicates the termination setting
+ * that corresponds to that bit should be enabled, a 0 is disabled.
+ * It looks something like this:
+ *
+ * 0x0f = 1111-Single Ended Low Byte Termination on/off
+ * ||\-Single Ended High Byte Termination on/off
+ * |\-LVD Low Byte Termination on/off
+ * \-LVD High Byte Termination on/off
+ *
+ * For non-Ultra2 controllers, the upper 2 bits are not important. So, to
+ * enable both high byte and low byte termination on scsi0, I would need to
+ * make sure that the override_term variable was set to 0x03 (bits 0011).
+ * To make sure that all termination is enabled on an Ultra2 controller at
+ * scsi2 and only high byte termination on scsi1 and high and low byte
+ * termination on scsi0, I would set override_term=0xf23 (bits 1111 0010 0011)
+ *
+ * For the most part, users should never have to use this, that's why I
+ * left it fairly cryptic instead of easy to understand. If you need it,
+ * most likely someone will be telling you what your's needs to be set to.
+ */
+static int aic7xxx_override_term = -1;
+/*
+ * Certain motherboard chipset controllers tend to screw
+ * up the polarity of the term enable output pin. Use this variable
+ * to force the correct polarity for your system. This is a bitfield variable
+ * similar to the previous one, but this one has one bit per channel instead
+ * of four.
+ * 0 = Force the setting to active low.
+ * 1 = Force setting to active high.
+ * Most Adaptec cards are active high, several motherboards are active low.
+ * To force a 2940 card at SCSI 0 to active high and a motherboard 7895
+ * controller at scsi1 and scsi2 to active low, and a 2910 card at scsi3
+ * to active high, you would need to set stpwlev=0x9 (bits 1001).
+ *
+ * People shouldn't need to use this, but if you are experiencing lots of
+ * SCSI timeout problems, this may help. There is one sure way to test what
+ * this option needs to be. Using a boot floppy to boot the system, configure
+ * your system to enable all SCSI termination (in the Adaptec SCSI BIOS) and
+ * if needed then also pass a value to override_term to make sure that the
+ * driver is enabling SCSI termination, then set this variable to either 0
+ * or 1. When the driver boots, make sure there are *NO* SCSI cables
+ * connected to your controller. If it finds and inits the controller
+ * without problem, then the setting you passed to stpwlev was correct. If
+ * the driver goes into a reset loop and hangs the system, then you need the
+ * other setting for this variable. If neither setting lets the machine
+ * boot then you have definite termination problems that may not be fixable.
+ */
+static int aic7xxx_stpwlev = -1;
+/*
+ * Set this to non-0 in order to force the driver to panic the kernel
+ * and print out debugging info on a SCSI abort or reset cycle.
+ */
+static int aic7xxx_panic_on_abort = 0;
+/*
+ * PCI bus parity checking of the Adaptec controllers. This is somewhat
+ * dubious at best. To my knowledge, this option has never actually
+ * solved a PCI parity problem, but on certain machines with broken PCI
+ * chipset configurations, it can generate tons of false error messages.
+ * It's included in the driver for completeness.
+ * 0 = Shut off PCI parity check
+ * -1 = Normal polarity pci parity checking
+ * 1 = reverse polarity pci parity checking
+ *
+ * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
+ * variable to -1 you would actually want to simply pass the variable
+ * name without a number. That will invert the 0 which will result in
+ * -1.
+ */
+static int aic7xxx_pci_parity = 0;
+/*
+ * Set this to any non-0 value to cause us to dump the contents of all
+ * the card's registers in a hex dump format tailored to each model of
+ * controller.
+ *
+ * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION.
+ * YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES
+ * ONLY
+ */
+static int aic7xxx_dump_card = 0;
+/*
+ * Set this to a non-0 value to make us dump out the 32 bit instruction
+ * registers on the card after completing the sequencer download. This
+ * allows the actual sequencer download to be verified. It is possible
+ * to use this option and still boot up and run your system. This is
+ * only intended for debugging purposes.
+ */
+static int aic7xxx_dump_sequencer = 0;
+/*
+ * Certain newer motherboards have put new PCI based devices into the
+ * IO spaces that used to typically be occupied by VLB or EISA cards.
+ * This overlap can cause these newer motherboards to lock up when scanned
+ * for older EISA and VLB devices. Setting this option to non-0 will
+ * cause the driver to skip scanning for any VLB or EISA controllers and
+ * only support the PCI controllers. NOTE: this means that if the kernel
+ * os compiled with PCI support disabled, then setting this to non-0
+ * would result in never finding any devices :)
+ */
+static int aic7xxx_no_probe = 0;
+/*
+ * On some machines, enabling the external SCB RAM isn't reliable yet. I
+ * haven't had time to make test patches for things like changing the
+ * timing mode on that external RAM either. Some of those changes may
+ * fix the problem. Until then though, we default to external SCB RAM
+ * off and give a command line option to enable it.
+ */
+static int aic7xxx_scbram = 0;
+/*
+ * So that we can set how long each device is given as a selection timeout.
+ * The table of values goes like this:
+ * 0 - 256ms
+ * 1 - 128ms
+ * 2 - 64ms
+ * 3 - 32ms
+ * We default to 64ms because it's fast. Some old SCSI-I devices need a
+ * longer time. The final value has to be left shifted by 3, hence 0x10
+ * is the final value.
+ */
+static int aic7xxx_seltime = 0x10;
+/*
+ * So that insmod can find the variable and make it point to something
+ */
+#ifdef MODULE
+static char * aic7xxx = NULL;
+module_param(aic7xxx, charp, 0);
+#endif
+
+#define VERBOSE_NORMAL 0x0000
+#define VERBOSE_NEGOTIATION 0x0001
+#define VERBOSE_SEQINT 0x0002
+#define VERBOSE_SCSIINT 0x0004
+#define VERBOSE_PROBE 0x0008
+#define VERBOSE_PROBE2 0x0010
+#define VERBOSE_NEGOTIATION2 0x0020
+#define VERBOSE_MINOR_ERROR 0x0040
+#define VERBOSE_TRACING 0x0080
+#define VERBOSE_ABORT 0x0f00
+#define VERBOSE_ABORT_MID 0x0100
+#define VERBOSE_ABORT_FIND 0x0200
+#define VERBOSE_ABORT_PROCESS 0x0400
+#define VERBOSE_ABORT_RETURN 0x0800
+#define VERBOSE_RESET 0xf000
+#define VERBOSE_RESET_MID 0x1000
+#define VERBOSE_RESET_FIND 0x2000
+#define VERBOSE_RESET_PROCESS 0x4000
+#define VERBOSE_RESET_RETURN 0x8000
+static int aic7xxx_verbose = VERBOSE_NORMAL | VERBOSE_NEGOTIATION |
+ VERBOSE_PROBE; /* verbose messages */
+
+
+/****************************************************************************
+ *
+ * We're going to start putting in function declarations so that order of
+ * functions is no longer important. As needed, they are added here.
+ *
+ ***************************************************************************/
+
+static int aic7xxx_release(struct Scsi_Host *host);
+static void aic7xxx_set_syncrate(struct aic7xxx_host *p,
+ struct aic7xxx_syncrate *syncrate, int target, int channel,
+ unsigned int period, unsigned int offset, unsigned char options,
+ unsigned int type, struct aic_dev_data *aic_dev);
+static void aic7xxx_set_width(struct aic7xxx_host *p, int target, int channel,
+ int lun, unsigned int width, unsigned int type,
+ struct aic_dev_data *aic_dev);
+static void aic7xxx_panic_abort(struct aic7xxx_host *p, Scsi_Cmnd *cmd);
+static void aic7xxx_print_card(struct aic7xxx_host *p);
+static void aic7xxx_print_scratch_ram(struct aic7xxx_host *p);
+static void aic7xxx_print_sequencer(struct aic7xxx_host *p, int downloaded);
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+static void aic7xxx_check_scbs(struct aic7xxx_host *p, char *buffer);
+#endif
+
+/****************************************************************************
+ *
+ * These functions are now used. They happen to be wrapped in useless
+ * inb/outb port read/writes around the real reads and writes because it
+ * seems that certain very fast CPUs have a problem dealing with us when
+ * going at full speed.
+ *
+ ***************************************************************************/
+
+static inline unsigned char
+aic_inb(struct aic7xxx_host *p, long port)
+{
+#ifdef MMAPIO
+ unsigned char x;
+ if(p->maddr)
+ {
+ x = readb(p->maddr + port);
+ }
+ else
+ {
+ x = inb(p->base + port);
+ }
+ return(x);
+#else
+ return(inb(p->base + port));
+#endif
+}
+
+static inline void
+aic_outb(struct aic7xxx_host *p, unsigned char val, long port)
+{
+#ifdef MMAPIO
+ if(p->maddr)
+ {
+ writeb(val, p->maddr + port);
+ mb(); /* locked operation in order to force CPU ordering */
+ readb(p->maddr + HCNTRL); /* dummy read to flush the PCI write */
+ }
+ else
+ {
+ outb(val, p->base + port);
+ mb(); /* locked operation in order to force CPU ordering */
+ }
+#else
+ outb(val, p->base + port);
+ mb(); /* locked operation in order to force CPU ordering */
+#endif
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_setup
+ *
+ * Description:
+ * Handle Linux boot parameters. This routine allows for assigning a value
+ * to a parameter with a ':' between the parameter and the value.
+ * ie. aic7xxx=unpause:0x0A,extended
+ *-F*************************************************************************/
+static int
+aic7xxx_setup(char *s)
+{
+ int i, n;
+ char *p;
+ char *end;
+
+ static struct {
+ const char *name;
+ unsigned int *flag;
+ } options[] = {
+ { "extended", &aic7xxx_extended },
+ { "no_reset", &aic7xxx_no_reset },
+ { "irq_trigger", &aic7xxx_irq_trigger },
+ { "verbose", &aic7xxx_verbose },
+ { "reverse_scan",&aic7xxx_reverse_scan },
+ { "override_term", &aic7xxx_override_term },
+ { "stpwlev", &aic7xxx_stpwlev },
+ { "no_probe", &aic7xxx_no_probe },
+ { "panic_on_abort", &aic7xxx_panic_on_abort },
+ { "pci_parity", &aic7xxx_pci_parity },
+ { "dump_card", &aic7xxx_dump_card },
+ { "dump_sequencer", &aic7xxx_dump_sequencer },
+ { "default_queue_depth", &aic7xxx_default_queue_depth },
+ { "scbram", &aic7xxx_scbram },
+ { "seltime", &aic7xxx_seltime },
+ { "tag_info", NULL }
+ };
+
+ end = strchr(s, '\0');
+
+ while ((p = strsep(&s, ",.")) != NULL)
+ {
+ for (i = 0; i < ARRAY_SIZE(options); i++)
+ {
+ n = strlen(options[i].name);
+ if (!strncmp(options[i].name, p, n))
+ {
+ if (!strncmp(p, "tag_info", n))
+ {
+ if (p[n] == ':')
+ {
+ char *base;
+ char *tok, *tok_end, *tok_end2;
+ char tok_list[] = { '.', ',', '{', '}', '\0' };
+ int i, instance = -1, device = -1;
+ unsigned char done = FALSE;
+
+ base = p;
+ tok = base + n + 1; /* Forward us just past the ':' */
+ tok_end = strchr(tok, '\0');
+ if (tok_end < end)
+ *tok_end = ',';
+ while(!done)
+ {
+ switch(*tok)
+ {
+ case '{':
+ if (instance == -1)
+ instance = 0;
+ else if (device == -1)
+ device = 0;
+ tok++;
+ break;
+ case '}':
+ if (device != -1)
+ device = -1;
+ else if (instance != -1)
+ instance = -1;
+ tok++;
+ break;
+ case ',':
+ case '.':
+ if (instance == -1)
+ done = TRUE;
+ else if (device >= 0)
+ device++;
+ else if (instance >= 0)
+ instance++;
+ if ( (device >= MAX_TARGETS) ||
+ (instance >= ARRAY_SIZE(aic7xxx_tag_info)) )
+ done = TRUE;
+ tok++;
+ if (!done)
+ {
+ base = tok;
+ }
+ break;
+ case '\0':
+ done = TRUE;
+ break;
+ default:
+ done = TRUE;
+ tok_end = strchr(tok, '\0');
+ for(i=0; tok_list[i]; i++)
+ {
+ tok_end2 = strchr(tok, tok_list[i]);
+ if ( (tok_end2) && (tok_end2 < tok_end) )
+ {
+ tok_end = tok_end2;
+ done = FALSE;
+ }
+ }
+ if ( (instance >= 0) && (device >= 0) &&
+ (instance < ARRAY_SIZE(aic7xxx_tag_info)) &&
+ (device < MAX_TARGETS) )
+ aic7xxx_tag_info[instance].tag_commands[device] =
+ simple_strtoul(tok, NULL, 0) & 0xff;
+ tok = tok_end;
+ break;
+ }
+ }
+ while((p != base) && (p != NULL))
+ p = strsep(&s, ",.");
+ }
+ }
+ else if (p[n] == ':')
+ {
+ *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
+ if(!strncmp(p, "seltime", n))
+ {
+ *(options[i].flag) = (*(options[i].flag) % 4) << 3;
+ }
+ }
+ else if (!strncmp(p, "verbose", n))
+ {
+ *(options[i].flag) = 0xff29;
+ }
+ else
+ {
+ *(options[i].flag) = ~(*(options[i].flag));
+ if(!strncmp(p, "seltime", n))
+ {
+ *(options[i].flag) = (*(options[i].flag) % 4) << 3;
+ }
+ }
+ }
+ }
+ }
+ return 1;
+}
+
+__setup("aic7xxx=", aic7xxx_setup);
+
+/*+F*************************************************************************
+ * Function:
+ * pause_sequencer
+ *
+ * Description:
+ * Pause the sequencer and wait for it to actually stop - this
+ * is important since the sequencer can disable pausing for critical
+ * sections.
+ *-F*************************************************************************/
+static void
+pause_sequencer(struct aic7xxx_host *p)
+{
+ aic_outb(p, p->pause, HCNTRL);
+ while ((aic_inb(p, HCNTRL) & PAUSE) == 0)
+ {
+ ;
+ }
+ if(p->features & AHC_ULTRA2)
+ {
+ aic_inb(p, CCSCBCTL);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * unpause_sequencer
+ *
+ * Description:
+ * Unpause the sequencer. Unremarkable, yet done often enough to
+ * warrant an easy way to do it.
+ *-F*************************************************************************/
+static void
+unpause_sequencer(struct aic7xxx_host *p, int unpause_always)
+{
+ if (unpause_always ||
+ ( !(aic_inb(p, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) &&
+ !(p->flags & AHC_HANDLING_REQINITS) ) )
+ {
+ aic_outb(p, p->unpause, HCNTRL);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * restart_sequencer
+ *
+ * Description:
+ * Restart the sequencer program from address zero. This assumes
+ * that the sequencer is already paused.
+ *-F*************************************************************************/
+static void
+restart_sequencer(struct aic7xxx_host *p)
+{
+ aic_outb(p, 0, SEQADDR0);
+ aic_outb(p, 0, SEQADDR1);
+ aic_outb(p, FASTMODE, SEQCTL);
+}
+
+/*
+ * We include the aic7xxx_seq.c file here so that the other defines have
+ * already been made, and so that it comes before the code that actually
+ * downloads the instructions (since we don't typically use function
+ * prototype, our code has to be ordered that way, it's a left-over from
+ * the original driver days.....I should fix it some time DL).
+ */
+#include "aic7xxx_old/aic7xxx_seq.c"
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_check_patch
+ *
+ * Description:
+ * See if the next patch to download should be downloaded.
+ *-F*************************************************************************/
+static int
+aic7xxx_check_patch(struct aic7xxx_host *p,
+ struct sequencer_patch **start_patch, int start_instr, int *skip_addr)
+{
+ struct sequencer_patch *cur_patch;
+ struct sequencer_patch *last_patch;
+ int num_patches;
+
+ num_patches = sizeof(sequencer_patches)/sizeof(struct sequencer_patch);
+ last_patch = &sequencer_patches[num_patches];
+ cur_patch = *start_patch;
+
+ while ((cur_patch < last_patch) && (start_instr == cur_patch->begin))
+ {
+ if (cur_patch->patch_func(p) == 0)
+ {
+ /*
+ * Start rejecting code.
+ */
+ *skip_addr = start_instr + cur_patch->skip_instr;
+ cur_patch += cur_patch->skip_patch;
+ }
+ else
+ {
+ /*
+ * Found an OK patch. Advance the patch pointer to the next patch
+ * and wait for our instruction pointer to get here.
+ */
+ cur_patch++;
+ }
+ }
+
+ *start_patch = cur_patch;
+ if (start_instr < *skip_addr)
+ /*
+ * Still skipping
+ */
+ return (0);
+ return(1);
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_download_instr
+ *
+ * Description:
+ * Find the next patch to download.
+ *-F*************************************************************************/
+static void
+aic7xxx_download_instr(struct aic7xxx_host *p, int instrptr,
+ unsigned char *dconsts)
+{
+ union ins_formats instr;
+ struct ins_format1 *fmt1_ins;
+ struct ins_format3 *fmt3_ins;
+ unsigned char opcode;
+
+ instr = *(union ins_formats*) &seqprog[instrptr * 4];
+
+ instr.integer = le32_to_cpu(instr.integer);
+
+ fmt1_ins = &instr.format1;
+ fmt3_ins = NULL;
+
+ /* Pull the opcode */
+ opcode = instr.format1.opcode;
+ switch (opcode)
+ {
+ case AIC_OP_JMP:
+ case AIC_OP_JC:
+ case AIC_OP_JNC:
+ case AIC_OP_CALL:
+ case AIC_OP_JNE:
+ case AIC_OP_JNZ:
+ case AIC_OP_JE:
+ case AIC_OP_JZ:
+ {
+ struct sequencer_patch *cur_patch;
+ int address_offset;
+ unsigned int address;
+ int skip_addr;
+ int i;
+
+ fmt3_ins = &instr.format3;
+ address_offset = 0;
+ address = fmt3_ins->address;
+ cur_patch = sequencer_patches;
+ skip_addr = 0;
+
+ for (i = 0; i < address;)
+ {
+ aic7xxx_check_patch(p, &cur_patch, i, &skip_addr);
+ if (skip_addr > i)
+ {
+ int end_addr;
+
+ end_addr = min_t(int, address, skip_addr);
+ address_offset += end_addr - i;
+ i = skip_addr;
+ }
+ else
+ {
+ i++;
+ }
+ }
+ address -= address_offset;
+ fmt3_ins->address = address;
+ /* Fall Through to the next code section */
+ }
+ case AIC_OP_OR:
+ case AIC_OP_AND:
+ case AIC_OP_XOR:
+ case AIC_OP_ADD:
+ case AIC_OP_ADC:
+ case AIC_OP_BMOV:
+ if (fmt1_ins->parity != 0)
+ {
+ fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
+ }
+ fmt1_ins->parity = 0;
+ /* Fall Through to the next code section */
+ case AIC_OP_ROL:
+ if ((p->features & AHC_ULTRA2) != 0)
+ {
+ int i, count;
+
+ /* Calculate odd parity for the instruction */
+ for ( i=0, count=0; i < 31; i++)
+ {
+ unsigned int mask;
+
+ mask = 0x01 << i;
+ if ((instr.integer & mask) != 0)
+ count++;
+ }
+ if (!(count & 0x01))
+ instr.format1.parity = 1;
+ }
+ else
+ {
+ if (fmt3_ins != NULL)
+ {
+ instr.integer = fmt3_ins->immediate |
+ (fmt3_ins->source << 8) |
+ (fmt3_ins->address << 16) |
+ (fmt3_ins->opcode << 25);
+ }
+ else
+ {
+ instr.integer = fmt1_ins->immediate |
+ (fmt1_ins->source << 8) |
+ (fmt1_ins->destination << 16) |
+ (fmt1_ins->ret << 24) |
+ (fmt1_ins->opcode << 25);
+ }
+ }
+ aic_outb(p, (instr.integer & 0xff), SEQRAM);
+ aic_outb(p, ((instr.integer >> 8) & 0xff), SEQRAM);
+ aic_outb(p, ((instr.integer >> 16) & 0xff), SEQRAM);
+ aic_outb(p, ((instr.integer >> 24) & 0xff), SEQRAM);
+ udelay(10);
+ break;
+
+ default:
+ panic("aic7xxx: Unknown opcode encountered in sequencer program.");
+ break;
+ }
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_loadseq
+ *
+ * Description:
+ * Load the sequencer code into the controller memory.
+ *-F*************************************************************************/
+static void
+aic7xxx_loadseq(struct aic7xxx_host *p)
+{
+ struct sequencer_patch *cur_patch;
+ int i;
+ int downloaded;
+ int skip_addr;
+ unsigned char download_consts[4] = {0, 0, 0, 0};
+
+ if (aic7xxx_verbose & VERBOSE_PROBE)
+ {
+ printk(KERN_INFO "(scsi%d) Downloading sequencer code...", p->host_no);
+ }
+#if 0
+ download_consts[TMODE_NUMCMDS] = p->num_targetcmds;
+#endif
+ download_consts[TMODE_NUMCMDS] = 0;
+ cur_patch = &sequencer_patches[0];
+ downloaded = 0;
+ skip_addr = 0;
+
+ aic_outb(p, PERRORDIS|LOADRAM|FAILDIS|FASTMODE, SEQCTL);
+ aic_outb(p, 0, SEQADDR0);
+ aic_outb(p, 0, SEQADDR1);
+
+ for (i = 0; i < sizeof(seqprog) / 4; i++)
+ {
+ if (aic7xxx_check_patch(p, &cur_patch, i, &skip_addr) == 0)
+ {
+ /* Skip this instruction for this configuration. */
+ continue;
+ }
+ aic7xxx_download_instr(p, i, &download_consts[0]);
+ downloaded++;
+ }
+
+ aic_outb(p, 0, SEQADDR0);
+ aic_outb(p, 0, SEQADDR1);
+ aic_outb(p, FASTMODE | FAILDIS, SEQCTL);
+ unpause_sequencer(p, TRUE);
+ mdelay(1);
+ pause_sequencer(p);
+ aic_outb(p, FASTMODE, SEQCTL);
+ if (aic7xxx_verbose & VERBOSE_PROBE)
+ {
+ printk(" %d instructions downloaded\n", downloaded);
+ }
+ if (aic7xxx_dump_sequencer)
+ aic7xxx_print_sequencer(p, downloaded);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_print_sequencer
+ *
+ * Description:
+ * Print the contents of the sequencer memory to the screen.
+ *-F*************************************************************************/
+static void
+aic7xxx_print_sequencer(struct aic7xxx_host *p, int downloaded)
+{
+ int i, k, temp;
+
+ aic_outb(p, PERRORDIS|LOADRAM|FAILDIS|FASTMODE, SEQCTL);
+ aic_outb(p, 0, SEQADDR0);
+ aic_outb(p, 0, SEQADDR1);
+
+ k = 0;
+ for (i=0; i < downloaded; i++)
+ {
+ if ( k == 0 )
+ printk("%03x: ", i);
+ temp = aic_inb(p, SEQRAM);
+ temp |= (aic_inb(p, SEQRAM) << 8);
+ temp |= (aic_inb(p, SEQRAM) << 16);
+ temp |= (aic_inb(p, SEQRAM) << 24);
+ printk("%08x", temp);
+ if ( ++k == 8 )
+ {
+ printk("\n");
+ k = 0;
+ }
+ else
+ printk(" ");
+ }
+ aic_outb(p, 0, SEQADDR0);
+ aic_outb(p, 0, SEQADDR1);
+ aic_outb(p, FASTMODE | FAILDIS, SEQCTL);
+ unpause_sequencer(p, TRUE);
+ mdelay(1);
+ pause_sequencer(p);
+ aic_outb(p, FASTMODE, SEQCTL);
+ printk("\n");
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_info
+ *
+ * Description:
+ * Return a string describing the driver.
+ *-F*************************************************************************/
+static const char *
+aic7xxx_info(struct Scsi_Host *dooh)
+{
+ static char buffer[256];
+ char *bp;
+ struct aic7xxx_host *p;
+
+ bp = &buffer[0];
+ p = (struct aic7xxx_host *)dooh->hostdata;
+ memset(bp, 0, sizeof(buffer));
+ strcpy(bp, "Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) ");
+ strcat(bp, AIC7XXX_C_VERSION);
+ strcat(bp, "/");
+ strcat(bp, AIC7XXX_H_VERSION);
+ strcat(bp, "\n");
+ strcat(bp, " <");
+ strcat(bp, board_names[p->board_name_index]);
+ strcat(bp, ">");
+
+ return(bp);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_find_syncrate
+ *
+ * Description:
+ * Look up the valid period to SCSIRATE conversion in our table
+ *-F*************************************************************************/
+static struct aic7xxx_syncrate *
+aic7xxx_find_syncrate(struct aic7xxx_host *p, unsigned int *period,
+ unsigned int maxsync, unsigned char *options)
+{
+ struct aic7xxx_syncrate *syncrate;
+ int done = FALSE;
+
+ switch(*options)
+ {
+ case MSG_EXT_PPR_OPTION_DT_CRC:
+ case MSG_EXT_PPR_OPTION_DT_UNITS:
+ if(!(p->features & AHC_ULTRA3))
+ {
+ *options = 0;
+ maxsync = max_t(unsigned int, maxsync, AHC_SYNCRATE_ULTRA2);
+ }
+ break;
+ case MSG_EXT_PPR_OPTION_DT_CRC_QUICK:
+ case MSG_EXT_PPR_OPTION_DT_UNITS_QUICK:
+ if(!(p->features & AHC_ULTRA3))
+ {
+ *options = 0;
+ maxsync = max_t(unsigned int, maxsync, AHC_SYNCRATE_ULTRA2);
+ }
+ else
+ {
+ /*
+ * we don't support the Quick Arbitration variants of dual edge
+ * clocking. As it turns out, we want to send back the
+ * same basic option, but without the QA attribute.
+ * We know that we are responding because we would never set
+ * these options ourself, we would only respond to them.
+ */
+ switch(*options)
+ {
+ case MSG_EXT_PPR_OPTION_DT_CRC_QUICK:
+ *options = MSG_EXT_PPR_OPTION_DT_CRC;
+ break;
+ case MSG_EXT_PPR_OPTION_DT_UNITS_QUICK:
+ *options = MSG_EXT_PPR_OPTION_DT_UNITS;
+ break;
+ }
+ }
+ break;
+ default:
+ *options = 0;
+ maxsync = max_t(unsigned int, maxsync, AHC_SYNCRATE_ULTRA2);
+ break;
+ }
+ syncrate = &aic7xxx_syncrates[maxsync];
+ while ( (syncrate->rate[0] != NULL) &&
+ (!(p->features & AHC_ULTRA2) || syncrate->sxfr_ultra2) )
+ {
+ if (*period <= syncrate->period)
+ {
+ switch(*options)
+ {
+ case MSG_EXT_PPR_OPTION_DT_CRC:
+ case MSG_EXT_PPR_OPTION_DT_UNITS:
+ if(!(syncrate->sxfr_ultra2 & AHC_SYNCRATE_CRC))
+ {
+ done = TRUE;
+ /*
+ * oops, we went too low for the CRC/DualEdge signalling, so
+ * clear the options byte
+ */
+ *options = 0;
+ /*
+ * We'll be sending a reply to this packet to set the options
+ * properly, so unilaterally set the period as well.
+ */
+ *period = syncrate->period;
+ }
+ else
+ {
+ done = TRUE;
+ if(syncrate == &aic7xxx_syncrates[maxsync])
+ {
+ *period = syncrate->period;
+ }
+ }
+ break;
+ default:
+ if(!(syncrate->sxfr_ultra2 & AHC_SYNCRATE_CRC))
+ {
+ done = TRUE;
+ if(syncrate == &aic7xxx_syncrates[maxsync])
+ {
+ *period = syncrate->period;
+ }
+ }
+ break;
+ }
+ if(done)
+ {
+ break;
+ }
+ }
+ syncrate++;
+ }
+ if ( (*period == 0) || (syncrate->rate[0] == NULL) ||
+ ((p->features & AHC_ULTRA2) && (syncrate->sxfr_ultra2 == 0)) )
+ {
+ /*
+ * Use async transfers for this target
+ */
+ *options = 0;
+ *period = 255;
+ syncrate = NULL;
+ }
+ return (syncrate);
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_find_period
+ *
+ * Description:
+ * Look up the valid SCSIRATE to period conversion in our table
+ *-F*************************************************************************/
+static unsigned int
+aic7xxx_find_period(struct aic7xxx_host *p, unsigned int scsirate,
+ unsigned int maxsync)
+{
+ struct aic7xxx_syncrate *syncrate;
+
+ if (p->features & AHC_ULTRA2)
+ {
+ scsirate &= SXFR_ULTRA2;
+ }
+ else
+ {
+ scsirate &= SXFR;
+ }
+
+ syncrate = &aic7xxx_syncrates[maxsync];
+ while (syncrate->rate[0] != NULL)
+ {
+ if (p->features & AHC_ULTRA2)
+ {
+ if (syncrate->sxfr_ultra2 == 0)
+ break;
+ else if (scsirate == syncrate->sxfr_ultra2)
+ return (syncrate->period);
+ else if (scsirate == (syncrate->sxfr_ultra2 & ~AHC_SYNCRATE_CRC))
+ return (syncrate->period);
+ }
+ else if (scsirate == (syncrate->sxfr & ~ULTRA_SXFR))
+ {
+ return (syncrate->period);
+ }
+ syncrate++;
+ }
+ return (0); /* async */
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_validate_offset
+ *
+ * Description:
+ * Set a valid offset value for a particular card in use and transfer
+ * settings in use.
+ *-F*************************************************************************/
+static void
+aic7xxx_validate_offset(struct aic7xxx_host *p,
+ struct aic7xxx_syncrate *syncrate, unsigned int *offset, int wide)
+{
+ unsigned int maxoffset;
+
+ /* Limit offset to what the card (and device) can do */
+ if (syncrate == NULL)
+ {
+ maxoffset = 0;
+ }
+ else if (p->features & AHC_ULTRA2)
+ {
+ maxoffset = MAX_OFFSET_ULTRA2;
+ }
+ else
+ {
+ if (wide)
+ maxoffset = MAX_OFFSET_16BIT;
+ else
+ maxoffset = MAX_OFFSET_8BIT;
+ }
+ *offset = min(*offset, maxoffset);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_set_syncrate
+ *
+ * Description:
+ * Set the actual syncrate down in the card and in our host structs
+ *-F*************************************************************************/
+static void
+aic7xxx_set_syncrate(struct aic7xxx_host *p, struct aic7xxx_syncrate *syncrate,
+ int target, int channel, unsigned int period, unsigned int offset,
+ unsigned char options, unsigned int type, struct aic_dev_data *aic_dev)
+{
+ unsigned char tindex;
+ unsigned short target_mask;
+ unsigned char lun, old_options;
+ unsigned int old_period, old_offset;
+
+ tindex = target | (channel << 3);
+ target_mask = 0x01 << tindex;
+ lun = aic_inb(p, SCB_TCL) & 0x07;
+
+ if (syncrate == NULL)
+ {
+ period = 0;
+ offset = 0;
+ }
+
+ old_period = aic_dev->cur.period;
+ old_offset = aic_dev->cur.offset;
+ old_options = aic_dev->cur.options;
+
+
+ if (type & AHC_TRANS_CUR)
+ {
+ unsigned int scsirate;
+
+ scsirate = aic_inb(p, TARG_SCSIRATE + tindex);
+ if (p->features & AHC_ULTRA2)
+ {
+ scsirate &= ~SXFR_ULTRA2;
+ if (syncrate != NULL)
+ {
+ switch(options)
+ {
+ case MSG_EXT_PPR_OPTION_DT_UNITS:
+ /*
+ * mask off the CRC bit in the xfer settings
+ */
+ scsirate |= (syncrate->sxfr_ultra2 & ~AHC_SYNCRATE_CRC);
+ break;
+ default:
+ scsirate |= syncrate->sxfr_ultra2;
+ break;
+ }
+ }
+ if (type & AHC_TRANS_ACTIVE)
+ {
+ aic_outb(p, offset, SCSIOFFSET);
+ }
+ aic_outb(p, offset, TARG_OFFSET + tindex);
+ }
+ else /* Not an Ultra2 controller */
+ {
+ scsirate &= ~(SXFR|SOFS);
+ p->ultraenb &= ~target_mask;
+ if (syncrate != NULL)
+ {
+ if (syncrate->sxfr & ULTRA_SXFR)
+ {
+ p->ultraenb |= target_mask;
+ }
+ scsirate |= (syncrate->sxfr & SXFR);
+ scsirate |= (offset & SOFS);
+ }
+ if (type & AHC_TRANS_ACTIVE)
+ {
+ unsigned char sxfrctl0;
+
+ sxfrctl0 = aic_inb(p, SXFRCTL0);
+ sxfrctl0 &= ~FAST20;
+ if (p->ultraenb & target_mask)
+ sxfrctl0 |= FAST20;
+ aic_outb(p, sxfrctl0, SXFRCTL0);
+ }
+ aic_outb(p, p->ultraenb & 0xff, ULTRA_ENB);
+ aic_outb(p, (p->ultraenb >> 8) & 0xff, ULTRA_ENB + 1 );
+ }
+ if (type & AHC_TRANS_ACTIVE)
+ {
+ aic_outb(p, scsirate, SCSIRATE);
+ }
+ aic_outb(p, scsirate, TARG_SCSIRATE + tindex);
+ aic_dev->cur.period = period;
+ aic_dev->cur.offset = offset;
+ aic_dev->cur.options = options;
+ if ( !(type & AHC_TRANS_QUITE) &&
+ (aic7xxx_verbose & VERBOSE_NEGOTIATION) &&
+ (aic_dev->flags & DEVICE_PRINT_DTR) )
+ {
+ if (offset)
+ {
+ int rate_mod = (scsirate & WIDEXFER) ? 1 : 0;
+
+ printk(INFO_LEAD "Synchronous at %s Mbyte/sec, "
+ "offset %d.\n", p->host_no, channel, target, lun,
+ syncrate->rate[rate_mod], offset);
+ }
+ else
+ {
+ printk(INFO_LEAD "Using asynchronous transfers.\n",
+ p->host_no, channel, target, lun);
+ }
+ aic_dev->flags &= ~DEVICE_PRINT_DTR;
+ }
+ }
+
+ if (type & AHC_TRANS_GOAL)
+ {
+ aic_dev->goal.period = period;
+ aic_dev->goal.offset = offset;
+ aic_dev->goal.options = options;
+ }
+
+ if (type & AHC_TRANS_USER)
+ {
+ p->user[tindex].period = period;
+ p->user[tindex].offset = offset;
+ p->user[tindex].options = options;
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_set_width
+ *
+ * Description:
+ * Set the actual width down in the card and in our host structs
+ *-F*************************************************************************/
+static void
+aic7xxx_set_width(struct aic7xxx_host *p, int target, int channel, int lun,
+ unsigned int width, unsigned int type, struct aic_dev_data *aic_dev)
+{
+ unsigned char tindex;
+ unsigned short target_mask;
+ unsigned int old_width;
+
+ tindex = target | (channel << 3);
+ target_mask = 1 << tindex;
+
+ old_width = aic_dev->cur.width;
+
+ if (type & AHC_TRANS_CUR)
+ {
+ unsigned char scsirate;
+
+ scsirate = aic_inb(p, TARG_SCSIRATE + tindex);
+
+ scsirate &= ~WIDEXFER;
+ if (width == MSG_EXT_WDTR_BUS_16_BIT)
+ scsirate |= WIDEXFER;
+
+ aic_outb(p, scsirate, TARG_SCSIRATE + tindex);
+
+ if (type & AHC_TRANS_ACTIVE)
+ aic_outb(p, scsirate, SCSIRATE);
+
+ aic_dev->cur.width = width;
+
+ if ( !(type & AHC_TRANS_QUITE) &&
+ (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ (aic_dev->flags & DEVICE_PRINT_DTR) )
+ {
+ printk(INFO_LEAD "Using %s transfers\n", p->host_no, channel, target,
+ lun, (scsirate & WIDEXFER) ? "Wide(16bit)" : "Narrow(8bit)" );
+ }
+ }
+
+ if (type & AHC_TRANS_GOAL)
+ aic_dev->goal.width = width;
+ if (type & AHC_TRANS_USER)
+ p->user[tindex].width = width;
+
+ if (aic_dev->goal.offset)
+ {
+ if (p->features & AHC_ULTRA2)
+ {
+ aic_dev->goal.offset = MAX_OFFSET_ULTRA2;
+ }
+ else if (width == MSG_EXT_WDTR_BUS_16_BIT)
+ {
+ aic_dev->goal.offset = MAX_OFFSET_16BIT;
+ }
+ else
+ {
+ aic_dev->goal.offset = MAX_OFFSET_8BIT;
+ }
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * scbq_init
+ *
+ * Description:
+ * SCB queue initialization.
+ *
+ *-F*************************************************************************/
+static void
+scbq_init(volatile scb_queue_type *queue)
+{
+ queue->head = NULL;
+ queue->tail = NULL;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * scbq_insert_head
+ *
+ * Description:
+ * Add an SCB to the head of the list.
+ *
+ *-F*************************************************************************/
+static inline void
+scbq_insert_head(volatile scb_queue_type *queue, struct aic7xxx_scb *scb)
+{
+ scb->q_next = queue->head;
+ queue->head = scb;
+ if (queue->tail == NULL) /* If list was empty, update tail. */
+ queue->tail = queue->head;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * scbq_remove_head
+ *
+ * Description:
+ * Remove an SCB from the head of the list.
+ *
+ *-F*************************************************************************/
+static inline struct aic7xxx_scb *
+scbq_remove_head(volatile scb_queue_type *queue)
+{
+ struct aic7xxx_scb * scbp;
+
+ scbp = queue->head;
+ if (queue->head != NULL)
+ queue->head = queue->head->q_next;
+ if (queue->head == NULL) /* If list is now empty, update tail. */
+ queue->tail = NULL;
+ return(scbp);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * scbq_remove
+ *
+ * Description:
+ * Removes an SCB from the list.
+ *
+ *-F*************************************************************************/
+static inline void
+scbq_remove(volatile scb_queue_type *queue, struct aic7xxx_scb *scb)
+{
+ if (queue->head == scb)
+ {
+ /* At beginning of queue, remove from head. */
+ scbq_remove_head(queue);
+ }
+ else
+ {
+ struct aic7xxx_scb *curscb = queue->head;
+
+ /*
+ * Search until the next scb is the one we're looking for, or
+ * we run out of queue.
+ */
+ while ((curscb != NULL) && (curscb->q_next != scb))
+ {
+ curscb = curscb->q_next;
+ }
+ if (curscb != NULL)
+ {
+ /* Found it. */
+ curscb->q_next = scb->q_next;
+ if (scb->q_next == NULL)
+ {
+ /* Update the tail when removing the tail. */
+ queue->tail = curscb;
+ }
+ }
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * scbq_insert_tail
+ *
+ * Description:
+ * Add an SCB at the tail of the list.
+ *
+ *-F*************************************************************************/
+static inline void
+scbq_insert_tail(volatile scb_queue_type *queue, struct aic7xxx_scb *scb)
+{
+ scb->q_next = NULL;
+ if (queue->tail != NULL) /* Add the scb at the end of the list. */
+ queue->tail->q_next = scb;
+ queue->tail = scb; /* Update the tail. */
+ if (queue->head == NULL) /* If list was empty, update head. */
+ queue->head = queue->tail;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_match_scb
+ *
+ * Description:
+ * Checks to see if an scb matches the target/channel as specified.
+ * If target is ALL_TARGETS (-1), then we're looking for any device
+ * on the specified channel; this happens when a channel is going
+ * to be reset and all devices on that channel must be aborted.
+ *-F*************************************************************************/
+static int
+aic7xxx_match_scb(struct aic7xxx_host *p, struct aic7xxx_scb *scb,
+ int target, int channel, int lun, unsigned char tag)
+{
+ int targ = (scb->hscb->target_channel_lun >> 4) & 0x0F;
+ int chan = (scb->hscb->target_channel_lun >> 3) & 0x01;
+ int slun = scb->hscb->target_channel_lun & 0x07;
+ int match;
+
+ match = ((chan == channel) || (channel == ALL_CHANNELS));
+ if (match != 0)
+ match = ((targ == target) || (target == ALL_TARGETS));
+ if (match != 0)
+ match = ((lun == slun) || (lun == ALL_LUNS));
+ if (match != 0)
+ match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL));
+
+ return (match);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_add_curscb_to_free_list
+ *
+ * Description:
+ * Adds the current scb (in SCBPTR) to the list of free SCBs.
+ *-F*************************************************************************/
+static void
+aic7xxx_add_curscb_to_free_list(struct aic7xxx_host *p)
+{
+ /*
+ * Invalidate the tag so that aic7xxx_find_scb doesn't think
+ * it's active
+ */
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic_outb(p, 0, SCB_CONTROL);
+
+ aic_outb(p, aic_inb(p, FREE_SCBH), SCB_NEXT);
+ aic_outb(p, aic_inb(p, SCBPTR), FREE_SCBH);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_rem_scb_from_disc_list
+ *
+ * Description:
+ * Removes the current SCB from the disconnected list and adds it
+ * to the free list.
+ *-F*************************************************************************/
+static unsigned char
+aic7xxx_rem_scb_from_disc_list(struct aic7xxx_host *p, unsigned char scbptr,
+ unsigned char prev)
+{
+ unsigned char next;
+
+ aic_outb(p, scbptr, SCBPTR);
+ next = aic_inb(p, SCB_NEXT);
+ aic7xxx_add_curscb_to_free_list(p);
+
+ if (prev != SCB_LIST_NULL)
+ {
+ aic_outb(p, prev, SCBPTR);
+ aic_outb(p, next, SCB_NEXT);
+ }
+ else
+ {
+ aic_outb(p, next, DISCONNECTED_SCBH);
+ }
+
+ return next;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_busy_target
+ *
+ * Description:
+ * Set the specified target busy.
+ *-F*************************************************************************/
+static inline void
+aic7xxx_busy_target(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ p->untagged_scbs[scb->hscb->target_channel_lun] = scb->hscb->tag;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_index_busy_target
+ *
+ * Description:
+ * Returns the index of the busy target, and optionally sets the
+ * target inactive.
+ *-F*************************************************************************/
+static inline unsigned char
+aic7xxx_index_busy_target(struct aic7xxx_host *p, unsigned char tcl,
+ int unbusy)
+{
+ unsigned char busy_scbid;
+
+ busy_scbid = p->untagged_scbs[tcl];
+ if (unbusy)
+ {
+ p->untagged_scbs[tcl] = SCB_LIST_NULL;
+ }
+ return (busy_scbid);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_find_scb
+ *
+ * Description:
+ * Look through the SCB array of the card and attempt to find the
+ * hardware SCB that corresponds to the passed in SCB. Return
+ * SCB_LIST_NULL if unsuccessful. This routine assumes that the
+ * card is already paused.
+ *-F*************************************************************************/
+static unsigned char
+aic7xxx_find_scb(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ unsigned char saved_scbptr;
+ unsigned char curindex;
+
+ saved_scbptr = aic_inb(p, SCBPTR);
+ curindex = 0;
+ for (curindex = 0; curindex < p->scb_data->maxhscbs; curindex++)
+ {
+ aic_outb(p, curindex, SCBPTR);
+ if (aic_inb(p, SCB_TAG) == scb->hscb->tag)
+ {
+ break;
+ }
+ }
+ aic_outb(p, saved_scbptr, SCBPTR);
+ if (curindex >= p->scb_data->maxhscbs)
+ {
+ curindex = SCB_LIST_NULL;
+ }
+
+ return (curindex);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_allocate_scb
+ *
+ * Description:
+ * Get an SCB from the free list or by allocating a new one.
+ *-F*************************************************************************/
+static int
+aic7xxx_allocate_scb(struct aic7xxx_host *p)
+{
+ struct aic7xxx_scb *scbp = NULL;
+ int scb_size = (sizeof (struct hw_scatterlist) * AIC7XXX_MAX_SG) + 12 + 6;
+ int i;
+ int step = PAGE_SIZE / 1024;
+ unsigned long scb_count = 0;
+ struct hw_scatterlist *hsgp;
+ struct aic7xxx_scb *scb_ap;
+ struct aic7xxx_scb_dma *scb_dma;
+ unsigned char *bufs;
+
+ if (p->scb_data->numscbs < p->scb_data->maxscbs)
+ {
+ /*
+ * Calculate the optimal number of SCBs to allocate.
+ *
+ * NOTE: This formula works because the sizeof(sg_array) is always
+ * 1024. Therefore, scb_size * i would always be > PAGE_SIZE *
+ * (i/step). The (i-1) allows the left hand side of the equation
+ * to grow into the right hand side to a point of near perfect
+ * efficiency since scb_size * (i -1) is growing slightly faster
+ * than the right hand side. If the number of SG array elements
+ * is changed, this function may not be near so efficient any more.
+ *
+ * Since the DMA'able buffers are now allocated in a separate
+ * chunk this algorithm has been modified to match. The '12'
+ * and '6' factors in scb_size are for the DMA'able command byte
+ * and sensebuffers respectively. -DaveM
+ */
+ for ( i=step;; i *= 2 )
+ {
+ if ( (scb_size * (i-1)) >= ( (PAGE_SIZE * (i/step)) - 64 ) )
+ {
+ i /= 2;
+ break;
+ }
+ }
+ scb_count = min( (i-1), p->scb_data->maxscbs - p->scb_data->numscbs);
+ scb_ap = (struct aic7xxx_scb *)kmalloc(sizeof (struct aic7xxx_scb) * scb_count
+ + sizeof(struct aic7xxx_scb_dma), GFP_ATOMIC);
+ if (scb_ap == NULL)
+ return(0);
+ scb_dma = (struct aic7xxx_scb_dma *)&scb_ap[scb_count];
+ hsgp = (struct hw_scatterlist *)
+ pci_alloc_consistent(p->pdev, scb_size * scb_count,
+ &scb_dma->dma_address);
+ if (hsgp == NULL)
+ {
+ kfree(scb_ap);
+ return(0);
+ }
+ bufs = (unsigned char *)&hsgp[scb_count * AIC7XXX_MAX_SG];
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ {
+ if (p->scb_data->numscbs == 0)
+ printk(INFO_LEAD "Allocating initial %ld SCB structures.\n",
+ p->host_no, -1, -1, -1, scb_count);
+ else
+ printk(INFO_LEAD "Allocating %ld additional SCB structures.\n",
+ p->host_no, -1, -1, -1, scb_count);
+ }
+#endif
+ memset(scb_ap, 0, sizeof (struct aic7xxx_scb) * scb_count);
+ scb_dma->dma_offset = (unsigned long)scb_dma->dma_address
+ - (unsigned long)hsgp;
+ scb_dma->dma_len = scb_size * scb_count;
+ for (i=0; i < scb_count; i++)
+ {
+ scbp = &scb_ap[i];
+ scbp->hscb = &p->scb_data->hscbs[p->scb_data->numscbs];
+ scbp->sg_list = &hsgp[i * AIC7XXX_MAX_SG];
+ scbp->sense_cmd = bufs;
+ scbp->cmnd = bufs + 6;
+ bufs += 12 + 6;
+ scbp->scb_dma = scb_dma;
+ memset(scbp->hscb, 0, sizeof(struct aic7xxx_hwscb));
+ scbp->hscb->tag = p->scb_data->numscbs;
+ /*
+ * Place in the scb array; never is removed
+ */
+ p->scb_data->scb_array[p->scb_data->numscbs++] = scbp;
+ scbq_insert_tail(&p->scb_data->free_scbs, scbp);
+ }
+ scbp->kmalloc_ptr = scb_ap;
+ }
+ return(scb_count);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_queue_cmd_complete
+ *
+ * Description:
+ * Due to race conditions present in the SCSI subsystem, it is easier
+ * to queue completed commands, then call scsi_done() on them when
+ * we're finished. This function queues the completed commands.
+ *-F*************************************************************************/
+static void
+aic7xxx_queue_cmd_complete(struct aic7xxx_host *p, Scsi_Cmnd *cmd)
+{
+ aic7xxx_position(cmd) = SCB_LIST_NULL;
+ cmd->host_scribble = (char *)p->completeq.head;
+ p->completeq.head = cmd;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_done_cmds_complete
+ *
+ * Description:
+ * Process the completed command queue.
+ *-F*************************************************************************/
+static void
+aic7xxx_done_cmds_complete(struct aic7xxx_host *p)
+{
+ Scsi_Cmnd *cmd;
+
+ while (p->completeq.head != NULL)
+ {
+ cmd = p->completeq.head;
+ p->completeq.head = (Scsi_Cmnd *)cmd->host_scribble;
+ cmd->host_scribble = NULL;
+ cmd->scsi_done(cmd);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_free_scb
+ *
+ * Description:
+ * Free the scb and insert into the free scb list.
+ *-F*************************************************************************/
+static void
+aic7xxx_free_scb(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+
+ scb->flags = SCB_FREE;
+ scb->cmd = NULL;
+ scb->sg_count = 0;
+ scb->sg_length = 0;
+ scb->tag_action = 0;
+ scb->hscb->control = 0;
+ scb->hscb->target_status = 0;
+ scb->hscb->target_channel_lun = SCB_LIST_NULL;
+
+ scbq_insert_head(&p->scb_data->free_scbs, scb);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_done
+ *
+ * Description:
+ * Calls the higher level scsi done function and frees the scb.
+ *-F*************************************************************************/
+static void
+aic7xxx_done(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ Scsi_Cmnd *cmd = scb->cmd;
+ struct aic_dev_data *aic_dev = cmd->device->hostdata;
+ int tindex = TARGET_INDEX(cmd);
+ struct aic7xxx_scb *scbp;
+ unsigned char queue_depth;
+
+ if (cmd->use_sg > 1)
+ {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *)cmd->request_buffer;
+ pci_unmap_sg(p->pdev, sg, cmd->use_sg, scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ }
+ else if (cmd->request_bufflen)
+ pci_unmap_single(p->pdev, aic7xxx_mapping(cmd),
+ cmd->request_bufflen,
+ scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ if (scb->flags & SCB_SENSE)
+ {
+ pci_unmap_single(p->pdev,
+ le32_to_cpu(scb->sg_list[0].address),
+ sizeof(cmd->sense_buffer),
+ PCI_DMA_FROMDEVICE);
+ }
+ if (scb->flags & SCB_RECOVERY_SCB)
+ {
+ p->flags &= ~AHC_ABORT_PENDING;
+ }
+ if (scb->flags & (SCB_RESET|SCB_ABORT))
+ {
+ cmd->result |= (DID_RESET << 16);
+ }
+
+ if ((scb->flags & SCB_MSGOUT_BITS) != 0)
+ {
+ unsigned short mask;
+ int message_error = FALSE;
+
+ mask = 0x01 << tindex;
+
+ /*
+ * Check to see if we get an invalid message or a message error
+ * after failing to negotiate a wide or sync transfer message.
+ */
+ if ((scb->flags & SCB_SENSE) &&
+ ((scb->cmd->sense_buffer[12] == 0x43) || /* INVALID_MESSAGE */
+ (scb->cmd->sense_buffer[12] == 0x49))) /* MESSAGE_ERROR */
+ {
+ message_error = TRUE;
+ }
+
+ if (scb->flags & SCB_MSGOUT_WDTR)
+ {
+ if (message_error)
+ {
+ if ( (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ (aic_dev->flags & DEVICE_PRINT_DTR) )
+ {
+ printk(INFO_LEAD "Device failed to complete Wide Negotiation "
+ "processing and\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "returned a sense error code for invalid message, "
+ "disabling future\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "Wide negotiation to this device.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ }
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 0;
+ }
+ }
+ if (scb->flags & SCB_MSGOUT_SDTR)
+ {
+ if (message_error)
+ {
+ if ( (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ (aic_dev->flags & DEVICE_PRINT_DTR) )
+ {
+ printk(INFO_LEAD "Device failed to complete Sync Negotiation "
+ "processing and\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "returned a sense error code for invalid message, "
+ "disabling future\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "Sync negotiation to this device.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ aic_dev->flags &= ~DEVICE_PRINT_DTR;
+ }
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 0;
+ }
+ }
+ if (scb->flags & SCB_MSGOUT_PPR)
+ {
+ if(message_error)
+ {
+ if ( (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ (aic_dev->flags & DEVICE_PRINT_DTR) )
+ {
+ printk(INFO_LEAD "Device failed to complete Parallel Protocol "
+ "Request processing and\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "returned a sense error code for invalid message, "
+ "disabling future\n", p->host_no, CTL_OF_SCB(scb));
+ printk(INFO_LEAD "Parallel Protocol Request negotiation to this "
+ "device.\n", p->host_no, CTL_OF_SCB(scb));
+ }
+ /*
+ * Disable PPR negotiation and revert back to WDTR and SDTR setup
+ */
+ aic_dev->needppr = aic_dev->needppr_copy = 0;
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 1;
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 1;
+ }
+ }
+ }
+
+ queue_depth = aic_dev->temp_q_depth;
+ if (queue_depth >= aic_dev->active_cmds)
+ {
+ scbp = scbq_remove_head(&aic_dev->delayed_scbs);
+ if (scbp)
+ {
+ if (queue_depth == 1)
+ {
+ /*
+ * Give extra preference to untagged devices, such as CD-R devices
+ * This makes it more likely that a drive *won't* stuff up while
+ * waiting on data at a critical time, such as CD-R writing and
+ * audio CD ripping operations. Should also benefit tape drives.
+ */
+ scbq_insert_head(&p->waiting_scbs, scbp);
+ }
+ else
+ {
+ scbq_insert_tail(&p->waiting_scbs, scbp);
+ }
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "Moving SCB from delayed to waiting queue.\n",
+ p->host_no, CTL_OF_SCB(scbp));
+#endif
+ if (queue_depth > aic_dev->active_cmds)
+ {
+ scbp = scbq_remove_head(&aic_dev->delayed_scbs);
+ if (scbp)
+ scbq_insert_tail(&p->waiting_scbs, scbp);
+ }
+ }
+ }
+ if (!(scb->tag_action))
+ {
+ aic7xxx_index_busy_target(p, scb->hscb->target_channel_lun,
+ /* unbusy */ TRUE);
+ if (cmd->device->simple_tags)
+ {
+ aic_dev->temp_q_depth = aic_dev->max_q_depth;
+ }
+ }
+ if(scb->flags & SCB_DTR_SCB)
+ {
+ aic_dev->dtr_pending = 0;
+ }
+ aic_dev->active_cmds--;
+ p->activescbs--;
+
+ if ((scb->sg_length >= 512) && (((cmd->result >> 16) & 0xf) == DID_OK))
+ {
+ long *ptr;
+ int x, i;
+
+
+ if (rq_data_dir(cmd->request) == WRITE)
+ {
+ aic_dev->w_total++;
+ ptr = aic_dev->w_bins;
+ }
+ else
+ {
+ aic_dev->r_total++;
+ ptr = aic_dev->r_bins;
+ }
+ if(cmd->device->simple_tags && cmd->request->flags & REQ_HARDBARRIER)
+ {
+ aic_dev->barrier_total++;
+ if(scb->tag_action == MSG_ORDERED_Q_TAG)
+ aic_dev->ordered_total++;
+ }
+ x = scb->sg_length;
+ x >>= 10;
+ for(i=0; i<6; i++)
+ {
+ x >>= 2;
+ if(!x) {
+ ptr[i]++;
+ break;
+ }
+ }
+ if(i == 6 && x)
+ ptr[5]++;
+ }
+ aic7xxx_free_scb(p, scb);
+ aic7xxx_queue_cmd_complete(p, cmd);
+
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_run_done_queue
+ *
+ * Description:
+ * Calls the aic7xxx_done() for the Scsi_Cmnd of each scb in the
+ * aborted list, and adds each scb to the free list. If complete
+ * is TRUE, we also process the commands complete list.
+ *-F*************************************************************************/
+static void
+aic7xxx_run_done_queue(struct aic7xxx_host *p, /*complete*/ int complete)
+{
+ struct aic7xxx_scb *scb;
+ int i, found = 0;
+
+ for (i = 0; i < p->scb_data->numscbs; i++)
+ {
+ scb = p->scb_data->scb_array[i];
+ if (scb->flags & SCB_QUEUED_FOR_DONE)
+ {
+ if (scb->flags & SCB_QUEUE_FULL)
+ {
+ scb->cmd->result = QUEUE_FULL << 1;
+ }
+ else
+ {
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Aborting scb %d\n",
+ p->host_no, CTL_OF_SCB(scb), scb->hscb->tag);
+ /*
+ * Clear any residual information since the normal aic7xxx_done() path
+ * doesn't touch the residuals.
+ */
+ scb->hscb->residual_SG_segment_count = 0;
+ scb->hscb->residual_data_count[0] = 0;
+ scb->hscb->residual_data_count[1] = 0;
+ scb->hscb->residual_data_count[2] = 0;
+ }
+ found++;
+ aic7xxx_done(p, scb);
+ }
+ }
+ if (aic7xxx_verbose & (VERBOSE_ABORT_RETURN | VERBOSE_RESET_RETURN))
+ {
+ printk(INFO_LEAD "%d commands found and queued for "
+ "completion.\n", p->host_no, -1, -1, -1, found);
+ }
+ if (complete)
+ {
+ aic7xxx_done_cmds_complete(p);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_abort_waiting_scb
+ *
+ * Description:
+ * Manipulate the waiting for selection list and return the
+ * scb that follows the one that we remove.
+ *-F*************************************************************************/
+static unsigned char
+aic7xxx_abort_waiting_scb(struct aic7xxx_host *p, struct aic7xxx_scb *scb,
+ unsigned char scbpos, unsigned char prev)
+{
+ unsigned char curscb, next;
+
+ /*
+ * Select the SCB we want to abort and pull the next pointer out of it.
+ */
+ curscb = aic_inb(p, SCBPTR);
+ aic_outb(p, scbpos, SCBPTR);
+ next = aic_inb(p, SCB_NEXT);
+
+ aic7xxx_add_curscb_to_free_list(p);
+
+ /*
+ * Update the waiting list
+ */
+ if (prev == SCB_LIST_NULL)
+ {
+ /*
+ * First in the list
+ */
+ aic_outb(p, next, WAITING_SCBH);
+ }
+ else
+ {
+ /*
+ * Select the scb that pointed to us and update its next pointer.
+ */
+ aic_outb(p, prev, SCBPTR);
+ aic_outb(p, next, SCB_NEXT);
+ }
+ /*
+ * Point us back at the original scb position and inform the SCSI
+ * system that the command has been aborted.
+ */
+ aic_outb(p, curscb, SCBPTR);
+ return (next);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_search_qinfifo
+ *
+ * Description:
+ * Search the queue-in FIFO for matching SCBs and conditionally
+ * requeue. Returns the number of matching SCBs.
+ *-F*************************************************************************/
+static int
+aic7xxx_search_qinfifo(struct aic7xxx_host *p, int target, int channel,
+ int lun, unsigned char tag, int flags, int requeue,
+ volatile scb_queue_type *queue)
+{
+ int found;
+ unsigned char qinpos, qintail;
+ struct aic7xxx_scb *scbp;
+
+ found = 0;
+ qinpos = aic_inb(p, QINPOS);
+ qintail = p->qinfifonext;
+
+ p->qinfifonext = qinpos;
+
+ while (qinpos != qintail)
+ {
+ scbp = p->scb_data->scb_array[p->qinfifo[qinpos++]];
+ if (aic7xxx_match_scb(p, scbp, target, channel, lun, tag))
+ {
+ /*
+ * We found an scb that needs to be removed.
+ */
+ if (requeue && (queue != NULL))
+ {
+ if (scbp->flags & SCB_WAITINGQ)
+ {
+ scbq_remove(queue, scbp);
+ scbq_remove(&p->waiting_scbs, scbp);
+ scbq_remove(&AIC_DEV(scbp->cmd)->delayed_scbs, scbp);
+ AIC_DEV(scbp->cmd)->active_cmds++;
+ p->activescbs++;
+ }
+ scbq_insert_tail(queue, scbp);
+ AIC_DEV(scbp->cmd)->active_cmds--;
+ p->activescbs--;
+ scbp->flags |= SCB_WAITINGQ;
+ if ( !(scbp->tag_action & TAG_ENB) )
+ {
+ aic7xxx_index_busy_target(p, scbp->hscb->target_channel_lun,
+ TRUE);
+ }
+ }
+ else if (requeue)
+ {
+ p->qinfifo[p->qinfifonext++] = scbp->hscb->tag;
+ }
+ else
+ {
+ /*
+ * Preserve any SCB_RECOVERY_SCB flags on this scb then set the
+ * flags we were called with, presumeably so aic7xxx_run_done_queue
+ * can find this scb
+ */
+ scbp->flags = flags | (scbp->flags & SCB_RECOVERY_SCB);
+ if (aic7xxx_index_busy_target(p, scbp->hscb->target_channel_lun,
+ FALSE) == scbp->hscb->tag)
+ {
+ aic7xxx_index_busy_target(p, scbp->hscb->target_channel_lun,
+ TRUE);
+ }
+ }
+ found++;
+ }
+ else
+ {
+ p->qinfifo[p->qinfifonext++] = scbp->hscb->tag;
+ }
+ }
+ /*
+ * Now that we've done the work, clear out any left over commands in the
+ * qinfifo and update the KERNEL_QINPOS down on the card.
+ *
+ * NOTE: This routine expect the sequencer to already be paused when
+ * it is run....make sure it's that way!
+ */
+ qinpos = p->qinfifonext;
+ while(qinpos != qintail)
+ {
+ p->qinfifo[qinpos++] = SCB_LIST_NULL;
+ }
+ if (p->features & AHC_QUEUE_REGS)
+ aic_outb(p, p->qinfifonext, HNSCB_QOFF);
+ else
+ aic_outb(p, p->qinfifonext, KERNEL_QINPOS);
+
+ return (found);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_scb_on_qoutfifo
+ *
+ * Description:
+ * Is the scb that was passed to us currently on the qoutfifo?
+ *-F*************************************************************************/
+static int
+aic7xxx_scb_on_qoutfifo(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ int i=0;
+
+ while(p->qoutfifo[(p->qoutfifonext + i) & 0xff ] != SCB_LIST_NULL)
+ {
+ if(p->qoutfifo[(p->qoutfifonext + i) & 0xff ] == scb->hscb->tag)
+ return TRUE;
+ else
+ i++;
+ }
+ return FALSE;
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_reset_device
+ *
+ * Description:
+ * The device at the given target/channel has been reset. Abort
+ * all active and queued scbs for that target/channel. This function
+ * need not worry about linked next pointers because if was a MSG_ABORT_TAG
+ * then we had a tagged command (no linked next), if it was MSG_ABORT or
+ * MSG_BUS_DEV_RESET then the device won't know about any commands any more
+ * and no busy commands will exist, and if it was a bus reset, then nothing
+ * knows about any linked next commands any more. In all cases, we don't
+ * need to worry about the linked next or busy scb, we just need to clear
+ * them.
+ *-F*************************************************************************/
+static void
+aic7xxx_reset_device(struct aic7xxx_host *p, int target, int channel,
+ int lun, unsigned char tag)
+{
+ struct aic7xxx_scb *scbp, *prev_scbp;
+ struct scsi_device *sd;
+ unsigned char active_scb, tcl, scb_tag;
+ int i = 0, init_lists = FALSE;
+ struct aic_dev_data *aic_dev;
+
+ /*
+ * Restore this when we're done
+ */
+ active_scb = aic_inb(p, SCBPTR);
+ scb_tag = aic_inb(p, SCB_TAG);
+
+ if (aic7xxx_verbose & (VERBOSE_RESET_PROCESS | VERBOSE_ABORT_PROCESS))
+ {
+ printk(INFO_LEAD "Reset device, hardware_scb %d,\n",
+ p->host_no, channel, target, lun, active_scb);
+ printk(INFO_LEAD "Current scb %d, SEQADDR 0x%x, LASTPHASE "
+ "0x%x\n",
+ p->host_no, channel, target, lun, scb_tag,
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, LASTPHASE));
+ printk(INFO_LEAD "SG_CACHEPTR 0x%x, SG_COUNT %d, SCSISIGI 0x%x\n",
+ p->host_no, channel, target, lun,
+ (p->features & AHC_ULTRA2) ? aic_inb(p, SG_CACHEPTR) : 0,
+ aic_inb(p, SG_COUNT), aic_inb(p, SCSISIGI));
+ printk(INFO_LEAD "SSTAT0 0x%x, SSTAT1 0x%x, SSTAT2 0x%x\n",
+ p->host_no, channel, target, lun, aic_inb(p, SSTAT0),
+ aic_inb(p, SSTAT1), aic_inb(p, SSTAT2));
+ }
+
+ /*
+ * Deal with the busy target and linked next issues.
+ */
+ list_for_each_entry(aic_dev, &p->aic_devs, list)
+ {
+ if (aic7xxx_verbose & (VERBOSE_RESET_PROCESS | VERBOSE_ABORT_PROCESS))
+ printk(INFO_LEAD "processing aic_dev %p\n", p->host_no, channel, target,
+ lun, aic_dev);
+ sd = aic_dev->SDptr;
+
+ if((target != ALL_TARGETS && target != sd->id) ||
+ (channel != ALL_CHANNELS && channel != sd->channel))
+ continue;
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Cleaning up status information "
+ "and delayed_scbs.\n", p->host_no, sd->channel, sd->id, sd->lun);
+ aic_dev->flags &= ~BUS_DEVICE_RESET_PENDING;
+ if ( tag == SCB_LIST_NULL )
+ {
+ aic_dev->dtr_pending = 0;
+ aic_dev->needppr = aic_dev->needppr_copy;
+ aic_dev->needsdtr = aic_dev->needsdtr_copy;
+ aic_dev->needwdtr = aic_dev->needwdtr_copy;
+ aic_dev->flags = DEVICE_PRINT_DTR;
+ aic_dev->temp_q_depth = aic_dev->max_q_depth;
+ }
+ tcl = (sd->id << 4) | (sd->channel << 3) | sd->lun;
+ if ( (aic7xxx_index_busy_target(p, tcl, FALSE) == tag) ||
+ (tag == SCB_LIST_NULL) )
+ aic7xxx_index_busy_target(p, tcl, /* unbusy */ TRUE);
+ prev_scbp = NULL;
+ scbp = aic_dev->delayed_scbs.head;
+ while (scbp != NULL)
+ {
+ prev_scbp = scbp;
+ scbp = scbp->q_next;
+ if (aic7xxx_match_scb(p, prev_scbp, target, channel, lun, tag))
+ {
+ scbq_remove(&aic_dev->delayed_scbs, prev_scbp);
+ if (prev_scbp->flags & SCB_WAITINGQ)
+ {
+ aic_dev->active_cmds++;
+ p->activescbs++;
+ }
+ prev_scbp->flags &= ~(SCB_ACTIVE | SCB_WAITINGQ);
+ prev_scbp->flags |= SCB_RESET | SCB_QUEUED_FOR_DONE;
+ }
+ }
+ }
+
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Cleaning QINFIFO.\n", p->host_no, channel, target, lun );
+ aic7xxx_search_qinfifo(p, target, channel, lun, tag,
+ SCB_RESET | SCB_QUEUED_FOR_DONE, /* requeue */ FALSE, NULL);
+
+/*
+ * Search the waiting_scbs queue for matches, this catches any SCB_QUEUED
+ * ABORT/RESET commands.
+ */
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Cleaning waiting_scbs.\n", p->host_no, channel,
+ target, lun );
+ {
+ struct aic7xxx_scb *scbp, *prev_scbp;
+
+ prev_scbp = NULL;
+ scbp = p->waiting_scbs.head;
+ while (scbp != NULL)
+ {
+ prev_scbp = scbp;
+ scbp = scbp->q_next;
+ if (aic7xxx_match_scb(p, prev_scbp, target, channel, lun, tag))
+ {
+ scbq_remove(&p->waiting_scbs, prev_scbp);
+ if (prev_scbp->flags & SCB_WAITINGQ)
+ {
+ AIC_DEV(prev_scbp->cmd)->active_cmds++;
+ p->activescbs++;
+ }
+ prev_scbp->flags &= ~(SCB_ACTIVE | SCB_WAITINGQ);
+ prev_scbp->flags |= SCB_RESET | SCB_QUEUED_FOR_DONE;
+ }
+ }
+ }
+
+
+ /*
+ * Search waiting for selection list.
+ */
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Cleaning waiting for selection "
+ "list.\n", p->host_no, channel, target, lun);
+ {
+ unsigned char next, prev, scb_index;
+
+ next = aic_inb(p, WAITING_SCBH); /* Start at head of list. */
+ prev = SCB_LIST_NULL;
+ while (next != SCB_LIST_NULL)
+ {
+ aic_outb(p, next, SCBPTR);
+ scb_index = aic_inb(p, SCB_TAG);
+ if (scb_index >= p->scb_data->numscbs)
+ {
+ /*
+ * No aic7xxx_verbose check here.....we want to see this since it
+ * means either the kernel driver or the sequencer screwed things up
+ */
+ printk(WARN_LEAD "Waiting List inconsistency; SCB index=%d, "
+ "numscbs=%d\n", p->host_no, channel, target, lun, scb_index,
+ p->scb_data->numscbs);
+ next = aic_inb(p, SCB_NEXT);
+ aic7xxx_add_curscb_to_free_list(p);
+ }
+ else
+ {
+ scbp = p->scb_data->scb_array[scb_index];
+ if (aic7xxx_match_scb(p, scbp, target, channel, lun, tag))
+ {
+ next = aic7xxx_abort_waiting_scb(p, scbp, next, prev);
+ if (scbp->flags & SCB_WAITINGQ)
+ {
+ AIC_DEV(scbp->cmd)->active_cmds++;
+ p->activescbs++;
+ }
+ scbp->flags &= ~(SCB_ACTIVE | SCB_WAITINGQ);
+ scbp->flags |= SCB_RESET | SCB_QUEUED_FOR_DONE;
+ if (prev == SCB_LIST_NULL)
+ {
+ /*
+ * This is either the first scb on the waiting list, or we
+ * have already yanked the first and haven't left any behind.
+ * Either way, we need to turn off the selection hardware if
+ * it isn't already off.
+ */
+ aic_outb(p, aic_inb(p, SCSISEQ) & ~ENSELO, SCSISEQ);
+ aic_outb(p, CLRSELTIMEO, CLRSINT1);
+ }
+ }
+ else
+ {
+ prev = next;
+ next = aic_inb(p, SCB_NEXT);
+ }
+ }
+ }
+ }
+
+ /*
+ * Go through disconnected list and remove any entries we have queued
+ * for completion, zeroing their control byte too.
+ */
+ if (aic7xxx_verbose & (VERBOSE_ABORT_PROCESS | VERBOSE_RESET_PROCESS))
+ printk(INFO_LEAD "Cleaning disconnected scbs "
+ "list.\n", p->host_no, channel, target, lun);
+ if (p->flags & AHC_PAGESCBS)
+ {
+ unsigned char next, prev, scb_index;
+
+ next = aic_inb(p, DISCONNECTED_SCBH);
+ prev = SCB_LIST_NULL;
+ while (next != SCB_LIST_NULL)
+ {
+ aic_outb(p, next, SCBPTR);
+ scb_index = aic_inb(p, SCB_TAG);
+ if (scb_index > p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "Disconnected List inconsistency; SCB index=%d, "
+ "numscbs=%d\n", p->host_no, channel, target, lun, scb_index,
+ p->scb_data->numscbs);
+ next = aic7xxx_rem_scb_from_disc_list(p, next, prev);
+ }
+ else
+ {
+ scbp = p->scb_data->scb_array[scb_index];
+ if (aic7xxx_match_scb(p, scbp, target, channel, lun, tag))
+ {
+ next = aic7xxx_rem_scb_from_disc_list(p, next, prev);
+ if (scbp->flags & SCB_WAITINGQ)
+ {
+ AIC_DEV(scbp->cmd)->active_cmds++;
+ p->activescbs++;
+ }
+ scbp->flags &= ~(SCB_ACTIVE | SCB_WAITINGQ);
+ scbp->flags |= SCB_RESET | SCB_QUEUED_FOR_DONE;
+ scbp->hscb->control = 0;
+ }
+ else
+ {
+ prev = next;
+ next = aic_inb(p, SCB_NEXT);
+ }
+ }
+ }
+ }
+
+ /*
+ * Walk the free list making sure no entries on the free list have
+ * a valid SCB_TAG value or SCB_CONTROL byte.
+ */
+ if (p->flags & AHC_PAGESCBS)
+ {
+ unsigned char next;
+
+ next = aic_inb(p, FREE_SCBH);
+ while (next != SCB_LIST_NULL)
+ {
+ aic_outb(p, next, SCBPTR);
+ if (aic_inb(p, SCB_TAG) < p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "Free list inconsistency!.\n", p->host_no, channel,
+ target, lun);
+ init_lists = TRUE;
+ next = SCB_LIST_NULL;
+ }
+ else
+ {
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic_outb(p, 0, SCB_CONTROL);
+ next = aic_inb(p, SCB_NEXT);
+ }
+ }
+ }
+
+ /*
+ * Go through the hardware SCB array looking for commands that
+ * were active but not on any list.
+ */
+ if (init_lists)
+ {
+ aic_outb(p, SCB_LIST_NULL, FREE_SCBH);
+ aic_outb(p, SCB_LIST_NULL, WAITING_SCBH);
+ aic_outb(p, SCB_LIST_NULL, DISCONNECTED_SCBH);
+ }
+ for (i = p->scb_data->maxhscbs - 1; i >= 0; i--)
+ {
+ unsigned char scbid;
+
+ aic_outb(p, i, SCBPTR);
+ if (init_lists)
+ {
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic_outb(p, SCB_LIST_NULL, SCB_NEXT);
+ aic_outb(p, 0, SCB_CONTROL);
+ aic7xxx_add_curscb_to_free_list(p);
+ }
+ else
+ {
+ scbid = aic_inb(p, SCB_TAG);
+ if (scbid < p->scb_data->numscbs)
+ {
+ scbp = p->scb_data->scb_array[scbid];
+ if (aic7xxx_match_scb(p, scbp, target, channel, lun, tag))
+ {
+ aic_outb(p, 0, SCB_CONTROL);
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic7xxx_add_curscb_to_free_list(p);
+ }
+ }
+ }
+ }
+
+ /*
+ * Go through the entire SCB array now and look for commands for
+ * for this target that are stillactive. These are other (most likely
+ * tagged) commands that were disconnected when the reset occurred.
+ * Any commands we find here we know this about, it wasn't on any queue,
+ * it wasn't in the qinfifo, it wasn't in the disconnected or waiting
+ * lists, so it really must have been a paged out SCB. In that case,
+ * we shouldn't need to bother with updating any counters, just mark
+ * the correct flags and go on.
+ */
+ for (i = 0; i < p->scb_data->numscbs; i++)
+ {
+ scbp = p->scb_data->scb_array[i];
+ if ((scbp->flags & SCB_ACTIVE) &&
+ aic7xxx_match_scb(p, scbp, target, channel, lun, tag) &&
+ !aic7xxx_scb_on_qoutfifo(p, scbp))
+ {
+ if (scbp->flags & SCB_WAITINGQ)
+ {
+ scbq_remove(&p->waiting_scbs, scbp);
+ scbq_remove(&AIC_DEV(scbp->cmd)->delayed_scbs, scbp);
+ AIC_DEV(scbp->cmd)->active_cmds++;
+ p->activescbs++;
+ }
+ scbp->flags |= SCB_RESET | SCB_QUEUED_FOR_DONE;
+ scbp->flags &= ~(SCB_ACTIVE | SCB_WAITINGQ);
+ }
+ }
+
+ aic_outb(p, active_scb, SCBPTR);
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_clear_intstat
+ *
+ * Description:
+ * Clears the interrupt status.
+ *-F*************************************************************************/
+static void
+aic7xxx_clear_intstat(struct aic7xxx_host *p)
+{
+ /* Clear any interrupt conditions this may have caused. */
+ aic_outb(p, CLRSELDO | CLRSELDI | CLRSELINGO, CLRSINT0);
+ aic_outb(p, CLRSELTIMEO | CLRATNO | CLRSCSIRSTI | CLRBUSFREE | CLRSCSIPERR |
+ CLRPHASECHG | CLRREQINIT, CLRSINT1);
+ aic_outb(p, CLRSCSIINT | CLRSEQINT | CLRBRKADRINT | CLRPARERR, CLRINT);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_reset_current_bus
+ *
+ * Description:
+ * Reset the current SCSI bus.
+ *-F*************************************************************************/
+static void
+aic7xxx_reset_current_bus(struct aic7xxx_host *p)
+{
+
+ /* Disable reset interrupts. */
+ aic_outb(p, aic_inb(p, SIMODE1) & ~ENSCSIRST, SIMODE1);
+
+ /* Turn off the bus' current operations, after all, we shouldn't have any
+ * valid commands left to cause a RSELI and SELO once we've tossed the
+ * bus away with this reset, so we might as well shut down the sequencer
+ * until the bus is restarted as oppossed to saving the current settings
+ * and restoring them (which makes no sense to me). */
+
+ /* Turn on the bus reset. */
+ aic_outb(p, aic_inb(p, SCSISEQ) | SCSIRSTO, SCSISEQ);
+ while ( (aic_inb(p, SCSISEQ) & SCSIRSTO) == 0)
+ mdelay(5);
+
+ /*
+ * Some of the new Ultra2 chipsets need a longer delay after a chip
+ * reset than just the init setup creates, so we have to delay here
+ * before we go into a reset in order to make the chips happy.
+ */
+ if (p->features & AHC_ULTRA2)
+ mdelay(250);
+ else
+ mdelay(50);
+
+ /* Turn off the bus reset. */
+ aic_outb(p, 0, SCSISEQ);
+ mdelay(10);
+
+ aic7xxx_clear_intstat(p);
+ /* Re-enable reset interrupts. */
+ aic_outb(p, aic_inb(p, SIMODE1) | ENSCSIRST, SIMODE1);
+
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_reset_channel
+ *
+ * Description:
+ * Reset the channel.
+ *-F*************************************************************************/
+static void
+aic7xxx_reset_channel(struct aic7xxx_host *p, int channel, int initiate_reset)
+{
+ unsigned long offset_min, offset_max;
+ unsigned char sblkctl;
+ int cur_channel;
+
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Reset channel called, %s initiate reset.\n",
+ p->host_no, channel, -1, -1, (initiate_reset==TRUE) ? "will" : "won't" );
+
+
+ if (channel == 1)
+ {
+ offset_min = 8;
+ offset_max = 16;
+ }
+ else
+ {
+ if (p->features & AHC_TWIN)
+ {
+ /* Channel A */
+ offset_min = 0;
+ offset_max = 8;
+ }
+ else
+ {
+ offset_min = 0;
+ if (p->features & AHC_WIDE)
+ {
+ offset_max = 16;
+ }
+ else
+ {
+ offset_max = 8;
+ }
+ }
+ }
+
+ while (offset_min < offset_max)
+ {
+ /*
+ * Revert to async/narrow transfers until we renegotiate.
+ */
+ aic_outb(p, 0, TARG_SCSIRATE + offset_min);
+ if (p->features & AHC_ULTRA2)
+ {
+ aic_outb(p, 0, TARG_OFFSET + offset_min);
+ }
+ offset_min++;
+ }
+
+ /*
+ * Reset the bus and unpause/restart the controller
+ */
+ sblkctl = aic_inb(p, SBLKCTL);
+ if ( (p->chip & AHC_CHIPID_MASK) == AHC_AIC7770 )
+ cur_channel = (sblkctl & SELBUSB) >> 3;
+ else
+ cur_channel = 0;
+ if ( (cur_channel != channel) && (p->features & AHC_TWIN) )
+ {
+ /*
+ * Case 1: Command for another bus is active
+ */
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Stealthily resetting idle channel.\n", p->host_no,
+ channel, -1, -1);
+ /*
+ * Stealthily reset the other bus without upsetting the current bus.
+ */
+ aic_outb(p, sblkctl ^ SELBUSB, SBLKCTL);
+ aic_outb(p, aic_inb(p, SIMODE1) & ~ENBUSFREE, SIMODE1);
+ if (initiate_reset)
+ {
+ aic7xxx_reset_current_bus(p);
+ }
+ aic_outb(p, aic_inb(p, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP), SCSISEQ);
+ aic7xxx_clear_intstat(p);
+ aic_outb(p, sblkctl, SBLKCTL);
+ }
+ else
+ {
+ /*
+ * Case 2: A command from this bus is active or we're idle.
+ */
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Resetting currently active channel.\n", p->host_no,
+ channel, -1, -1);
+ aic_outb(p, aic_inb(p, SIMODE1) & ~(ENBUSFREE|ENREQINIT),
+ SIMODE1);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+ p->msg_type = MSG_TYPE_NONE;
+ p->msg_len = 0;
+ if (initiate_reset)
+ {
+ aic7xxx_reset_current_bus(p);
+ }
+ aic_outb(p, aic_inb(p, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP), SCSISEQ);
+ aic7xxx_clear_intstat(p);
+ }
+ if (aic7xxx_verbose & VERBOSE_RESET_RETURN)
+ printk(INFO_LEAD "Channel reset\n", p->host_no, channel, -1, -1);
+ /*
+ * Clean up all the state information for the pending transactions
+ * on this bus.
+ */
+ aic7xxx_reset_device(p, ALL_TARGETS, channel, ALL_LUNS, SCB_LIST_NULL);
+
+ if ( !(p->features & AHC_TWIN) )
+ {
+ restart_sequencer(p);
+ }
+
+ return;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_run_waiting_queues
+ *
+ * Description:
+ * Scan the awaiting_scbs queue downloading and starting as many
+ * scbs as we can.
+ *-F*************************************************************************/
+static void
+aic7xxx_run_waiting_queues(struct aic7xxx_host *p)
+{
+ struct aic7xxx_scb *scb;
+ struct aic_dev_data *aic_dev;
+ int sent;
+
+
+ if (p->waiting_scbs.head == NULL)
+ return;
+
+ sent = 0;
+
+ /*
+ * First handle SCBs that are waiting but have been assigned a slot.
+ */
+ while ((scb = scbq_remove_head(&p->waiting_scbs)) != NULL)
+ {
+ aic_dev = scb->cmd->device->hostdata;
+ if ( !scb->tag_action )
+ {
+ aic_dev->temp_q_depth = 1;
+ }
+ if ( aic_dev->active_cmds >= aic_dev->temp_q_depth)
+ {
+ scbq_insert_tail(&aic_dev->delayed_scbs, scb);
+ }
+ else
+ {
+ scb->flags &= ~SCB_WAITINGQ;
+ aic_dev->active_cmds++;
+ p->activescbs++;
+ if ( !(scb->tag_action) )
+ {
+ aic7xxx_busy_target(p, scb);
+ }
+ p->qinfifo[p->qinfifonext++] = scb->hscb->tag;
+ sent++;
+ }
+ }
+ if (sent)
+ {
+ if (p->features & AHC_QUEUE_REGS)
+ aic_outb(p, p->qinfifonext, HNSCB_QOFF);
+ else
+ {
+ pause_sequencer(p);
+ aic_outb(p, p->qinfifonext, KERNEL_QINPOS);
+ unpause_sequencer(p, FALSE);
+ }
+ if (p->activescbs > p->max_activescbs)
+ p->max_activescbs = p->activescbs;
+ }
+}
+
+#ifdef CONFIG_PCI
+
+#define DPE 0x80
+#define SSE 0x40
+#define RMA 0x20
+#define RTA 0x10
+#define STA 0x08
+#define DPR 0x01
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_pci_intr
+ *
+ * Description:
+ * Check the scsi card for PCI errors and clear the interrupt
+ *
+ * NOTE: If you don't have this function and a 2940 card encounters
+ * a PCI error condition, the machine will end up locked as the
+ * interrupt handler gets slammed with non-stop PCI error interrupts
+ *-F*************************************************************************/
+static void
+aic7xxx_pci_intr(struct aic7xxx_host *p)
+{
+ unsigned char status1;
+
+ pci_read_config_byte(p->pdev, PCI_STATUS + 1, &status1);
+
+ if ( (status1 & DPE) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Data Parity Error during PCI address or PCI write"
+ "phase.\n", p->host_no, -1, -1, -1);
+ if ( (status1 & SSE) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Signal System Error Detected\n", p->host_no,
+ -1, -1, -1);
+ if ( (status1 & RMA) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Received a PCI Master Abort\n", p->host_no,
+ -1, -1, -1);
+ if ( (status1 & RTA) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Received a PCI Target Abort\n", p->host_no,
+ -1, -1, -1);
+ if ( (status1 & STA) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Signaled a PCI Target Abort\n", p->host_no,
+ -1, -1, -1);
+ if ( (status1 & DPR) && (aic7xxx_verbose & VERBOSE_MINOR_ERROR) )
+ printk(WARN_LEAD "Data Parity Error has been reported via PCI pin "
+ "PERR#\n", p->host_no, -1, -1, -1);
+
+ pci_write_config_byte(p->pdev, PCI_STATUS + 1, status1);
+ if (status1 & (DPR|RMA|RTA))
+ aic_outb(p, CLRPARERR, CLRINT);
+
+ if ( (aic7xxx_panic_on_abort) && (p->spurious_int > 500) )
+ aic7xxx_panic_abort(p, NULL);
+
+}
+#endif /* CONFIG_PCI */
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_construct_ppr
+ *
+ * Description:
+ * Build up a Parallel Protocol Request message for use with SCSI-3
+ * devices.
+ *-F*************************************************************************/
+static void
+aic7xxx_construct_ppr(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ p->msg_buf[p->msg_index++] = MSG_EXTENDED;
+ p->msg_buf[p->msg_index++] = MSG_EXT_PPR_LEN;
+ p->msg_buf[p->msg_index++] = MSG_EXT_PPR;
+ p->msg_buf[p->msg_index++] = AIC_DEV(scb->cmd)->goal.period;
+ p->msg_buf[p->msg_index++] = 0;
+ p->msg_buf[p->msg_index++] = AIC_DEV(scb->cmd)->goal.offset;
+ p->msg_buf[p->msg_index++] = AIC_DEV(scb->cmd)->goal.width;
+ p->msg_buf[p->msg_index++] = AIC_DEV(scb->cmd)->goal.options;
+ p->msg_len += 8;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_construct_sdtr
+ *
+ * Description:
+ * Constucts a synchronous data transfer message in the message
+ * buffer on the sequencer.
+ *-F*************************************************************************/
+static void
+aic7xxx_construct_sdtr(struct aic7xxx_host *p, unsigned char period,
+ unsigned char offset)
+{
+ p->msg_buf[p->msg_index++] = MSG_EXTENDED;
+ p->msg_buf[p->msg_index++] = MSG_EXT_SDTR_LEN;
+ p->msg_buf[p->msg_index++] = MSG_EXT_SDTR;
+ p->msg_buf[p->msg_index++] = period;
+ p->msg_buf[p->msg_index++] = offset;
+ p->msg_len += 5;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_construct_wdtr
+ *
+ * Description:
+ * Constucts a wide data transfer message in the message buffer
+ * on the sequencer.
+ *-F*************************************************************************/
+static void
+aic7xxx_construct_wdtr(struct aic7xxx_host *p, unsigned char bus_width)
+{
+ p->msg_buf[p->msg_index++] = MSG_EXTENDED;
+ p->msg_buf[p->msg_index++] = MSG_EXT_WDTR_LEN;
+ p->msg_buf[p->msg_index++] = MSG_EXT_WDTR;
+ p->msg_buf[p->msg_index++] = bus_width;
+ p->msg_len += 4;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_calc_residual
+ *
+ * Description:
+ * Calculate the residual data not yet transferred.
+ *-F*************************************************************************/
+static void
+aic7xxx_calculate_residual (struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ struct aic7xxx_hwscb *hscb;
+ Scsi_Cmnd *cmd;
+ int actual, i;
+
+ cmd = scb->cmd;
+ hscb = scb->hscb;
+
+ /*
+ * Don't destroy valid residual information with
+ * residual coming from a check sense operation.
+ */
+ if (((scb->hscb->control & DISCONNECTED) == 0) &&
+ (scb->flags & SCB_SENSE) == 0)
+ {
+ /*
+ * We had an underflow. At this time, there's only
+ * one other driver that bothers to check for this,
+ * and cmd->underflow seems to be set rather half-
+ * heartedly in the higher-level SCSI code.
+ */
+ actual = scb->sg_length;
+ for (i=1; i < hscb->residual_SG_segment_count; i++)
+ {
+ actual -= scb->sg_list[scb->sg_count - i].length;
+ }
+ actual -= (hscb->residual_data_count[2] << 16) |
+ (hscb->residual_data_count[1] << 8) |
+ hscb->residual_data_count[0];
+
+ if (actual < cmd->underflow)
+ {
+ if (aic7xxx_verbose & VERBOSE_MINOR_ERROR)
+ {
+ printk(INFO_LEAD "Underflow - Wanted %u, %s %u, residual SG "
+ "count %d.\n", p->host_no, CTL_OF_SCB(scb), cmd->underflow,
+ (rq_data_dir(cmd->request) == WRITE) ? "wrote" : "read", actual,
+ hscb->residual_SG_segment_count);
+ printk(INFO_LEAD "status 0x%x.\n", p->host_no, CTL_OF_SCB(scb),
+ hscb->target_status);
+ }
+ /*
+ * In 2.4, only send back the residual information, don't flag this
+ * as an error. Before 2.4 we had to flag this as an error because
+ * the mid layer didn't check residual data counts to see if the
+ * command needs retried.
+ */
+ cmd->resid = scb->sg_length - actual;
+ aic7xxx_status(cmd) = hscb->target_status;
+ }
+ }
+
+ /*
+ * Clean out the residual information in the SCB for the
+ * next consumer.
+ */
+ hscb->residual_data_count[2] = 0;
+ hscb->residual_data_count[1] = 0;
+ hscb->residual_data_count[0] = 0;
+ hscb->residual_SG_segment_count = 0;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_handle_device_reset
+ *
+ * Description:
+ * Interrupt handler for sequencer interrupts (SEQINT).
+ *-F*************************************************************************/
+static void
+aic7xxx_handle_device_reset(struct aic7xxx_host *p, int target, int channel)
+{
+ unsigned char tindex = target;
+
+ tindex |= ((channel & 0x01) << 3);
+
+ /*
+ * Go back to async/narrow transfers and renegotiate.
+ */
+ aic_outb(p, 0, TARG_SCSIRATE + tindex);
+ if (p->features & AHC_ULTRA2)
+ aic_outb(p, 0, TARG_OFFSET + tindex);
+ aic7xxx_reset_device(p, target, channel, ALL_LUNS, SCB_LIST_NULL);
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Bus Device Reset delivered.\n", p->host_no, channel,
+ target, -1);
+ aic7xxx_run_done_queue(p, /*complete*/ TRUE);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_handle_seqint
+ *
+ * Description:
+ * Interrupt handler for sequencer interrupts (SEQINT).
+ *-F*************************************************************************/
+static void
+aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat)
+{
+ struct aic7xxx_scb *scb;
+ struct aic_dev_data *aic_dev;
+ unsigned short target_mask;
+ unsigned char target, lun, tindex;
+ unsigned char queue_flag = FALSE;
+ char channel;
+ int result;
+
+ target = ((aic_inb(p, SAVED_TCL) >> 4) & 0x0f);
+ if ( (p->chip & AHC_CHIPID_MASK) == AHC_AIC7770 )
+ channel = (aic_inb(p, SBLKCTL) & SELBUSB) >> 3;
+ else
+ channel = 0;
+ tindex = target + (channel << 3);
+ lun = aic_inb(p, SAVED_TCL) & 0x07;
+ target_mask = (0x01 << tindex);
+
+ /*
+ * Go ahead and clear the SEQINT now, that avoids any interrupt race
+ * conditions later on in case we enable some other interrupt.
+ */
+ aic_outb(p, CLRSEQINT, CLRINT);
+ switch (intstat & SEQINT_MASK)
+ {
+ case NO_MATCH:
+ {
+ aic_outb(p, aic_inb(p, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP),
+ SCSISEQ);
+ printk(WARN_LEAD "No active SCB for reconnecting target - Issuing "
+ "BUS DEVICE RESET.\n", p->host_no, channel, target, lun);
+ printk(WARN_LEAD " SAVED_TCL=0x%x, ARG_1=0x%x, SEQADDR=0x%x\n",
+ p->host_no, channel, target, lun,
+ aic_inb(p, SAVED_TCL), aic_inb(p, ARG_1),
+ (aic_inb(p, SEQADDR1) << 8) | aic_inb(p, SEQADDR0));
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, NULL);
+ }
+ break;
+
+ case SEND_REJECT:
+ {
+ if (aic7xxx_verbose & VERBOSE_MINOR_ERROR)
+ printk(INFO_LEAD "Rejecting unknown message (0x%x) received from "
+ "target, SEQ_FLAGS=0x%x\n", p->host_no, channel, target, lun,
+ aic_inb(p, ACCUM), aic_inb(p, SEQ_FLAGS));
+ }
+ break;
+
+ case NO_IDENT:
+ {
+ /*
+ * The reconnecting target either did not send an identify
+ * message, or did, but we didn't find an SCB to match and
+ * before it could respond to our ATN/abort, it hit a dataphase.
+ * The only safe thing to do is to blow it away with a bus
+ * reset.
+ */
+ if (aic7xxx_verbose & (VERBOSE_SEQINT | VERBOSE_RESET_MID))
+ printk(INFO_LEAD "Target did not send an IDENTIFY message; "
+ "LASTPHASE 0x%x, SAVED_TCL 0x%x\n", p->host_no, channel, target,
+ lun, aic_inb(p, LASTPHASE), aic_inb(p, SAVED_TCL));
+
+ aic7xxx_reset_channel(p, channel, /*initiate reset*/ TRUE);
+ aic7xxx_run_done_queue(p, TRUE);
+
+ }
+ break;
+
+ case BAD_PHASE:
+ if (aic_inb(p, LASTPHASE) == P_BUSFREE)
+ {
+ if (aic7xxx_verbose & VERBOSE_SEQINT)
+ printk(INFO_LEAD "Missed busfree.\n", p->host_no, channel,
+ target, lun);
+ restart_sequencer(p);
+ }
+ else
+ {
+ if (aic7xxx_verbose & VERBOSE_SEQINT)
+ printk(INFO_LEAD "Unknown scsi bus phase, continuing\n", p->host_no,
+ channel, target, lun);
+ }
+ break;
+
+ case EXTENDED_MSG:
+ {
+ p->msg_type = MSG_TYPE_INITIATOR_MSGIN;
+ p->msg_len = 0;
+ p->msg_index = 0;
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "Enabling REQINITs for MSG_IN\n", p->host_no,
+ channel, target, lun);
+#endif
+
+ /*
+ * To actually receive the message, simply turn on
+ * REQINIT interrupts and let our interrupt handler
+ * do the rest (REQINIT should already be true).
+ */
+ p->flags |= AHC_HANDLING_REQINITS;
+ aic_outb(p, aic_inb(p, SIMODE1) | ENREQINIT, SIMODE1);
+
+ /*
+ * We don't want the sequencer unpaused yet so we return early
+ */
+ return;
+ }
+
+ case REJECT_MSG:
+ {
+ /*
+ * What we care about here is if we had an outstanding SDTR
+ * or WDTR message for this target. If we did, this is a
+ * signal that the target is refusing negotiation.
+ */
+ unsigned char scb_index;
+ unsigned char last_msg;
+
+ scb_index = aic_inb(p, SCB_TAG);
+ scb = p->scb_data->scb_array[scb_index];
+ aic_dev = AIC_DEV(scb->cmd);
+ last_msg = aic_inb(p, LAST_MSG);
+
+ if ( (last_msg == MSG_IDENTIFYFLAG) &&
+ (scb->tag_action) &&
+ !(scb->flags & SCB_MSGOUT_BITS) )
+ {
+ if (scb->tag_action == MSG_ORDERED_Q_TAG)
+ {
+ /*
+ * OK...the device seems able to accept tagged commands, but
+ * not ordered tag commands, only simple tag commands. So, we
+ * disable ordered tag commands and go on with life just like
+ * normal.
+ */
+ scsi_adjust_queue_depth(scb->cmd->device, MSG_SIMPLE_TAG,
+ scb->cmd->device->queue_depth);
+ scb->tag_action = MSG_SIMPLE_Q_TAG;
+ scb->hscb->control &= ~SCB_TAG_TYPE;
+ scb->hscb->control |= MSG_SIMPLE_Q_TAG;
+ aic_outb(p, scb->hscb->control, SCB_CONTROL);
+ /*
+ * OK..we set the tag type to simple tag command, now we re-assert
+ * ATNO and hope this will take us into the identify phase again
+ * so we can resend the tag type and info to the device.
+ */
+ aic_outb(p, MSG_IDENTIFYFLAG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGI) | ATNO, SCSISIGO);
+ }
+ else if (scb->tag_action == MSG_SIMPLE_Q_TAG)
+ {
+ unsigned char i;
+ struct aic7xxx_scb *scbp;
+ int old_verbose;
+ /*
+ * Hmmmm....the device is flaking out on tagged commands.
+ */
+ scsi_adjust_queue_depth(scb->cmd->device, 0 /* untagged */,
+ p->host->cmd_per_lun);
+ aic_dev->max_q_depth = aic_dev->temp_q_depth = 1;
+ /*
+ * We set this command up as a bus device reset. However, we have
+ * to clear the tag type as it's causing us problems. We shouldnt
+ * have to worry about any other commands being active, since if
+ * the device is refusing tagged commands, this should be the
+ * first tagged command sent to the device, however, we do have
+ * to worry about any other tagged commands that may already be
+ * in the qinfifo. The easiest way to do this, is to issue a BDR,
+ * send all the commands back to the mid level code, then let them
+ * come back and get rebuilt as untagged commands.
+ */
+ scb->tag_action = 0;
+ scb->hscb->control &= ~(TAG_ENB | SCB_TAG_TYPE);
+ aic_outb(p, scb->hscb->control, SCB_CONTROL);
+
+ old_verbose = aic7xxx_verbose;
+ aic7xxx_verbose &= ~(VERBOSE_RESET|VERBOSE_ABORT);
+ for (i=0; i < p->scb_data->numscbs; i++)
+ {
+ scbp = p->scb_data->scb_array[i];
+ if ((scbp->flags & SCB_ACTIVE) && (scbp != scb))
+ {
+ if (aic7xxx_match_scb(p, scbp, target, channel, lun, i))
+ {
+ aic7xxx_reset_device(p, target, channel, lun, i);
+ }
+ }
+ }
+ aic7xxx_run_done_queue(p, TRUE);
+ aic7xxx_verbose = old_verbose;
+ /*
+ * Wait until after the for loop to set the busy index since
+ * aic7xxx_reset_device will clear the busy index during its
+ * operation.
+ */
+ aic7xxx_busy_target(p, scb);
+ printk(INFO_LEAD "Device is refusing tagged commands, using "
+ "untagged I/O.\n", p->host_no, channel, target, lun);
+ aic_outb(p, MSG_IDENTIFYFLAG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGI) | ATNO, SCSISIGO);
+ }
+ }
+ else if (scb->flags & SCB_MSGOUT_PPR)
+ {
+ /*
+ * As per the draft specs, any device capable of supporting any of
+ * the option values other than 0 are not allowed to reject the
+ * PPR message. Instead, they must negotiate out what they do
+ * support instead of rejecting our offering or else they cause
+ * a parity error during msg_out phase to signal that they don't
+ * like our settings.
+ */
+ aic_dev->needppr = aic_dev->needppr_copy = 0;
+ aic7xxx_set_width(p, target, channel, lun, MSG_EXT_WDTR_BUS_8_BIT,
+ (AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE), aic_dev);
+ aic7xxx_set_syncrate(p, NULL, target, channel, 0, 0, 0,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE,
+ aic_dev);
+ aic_dev->goal.options = aic_dev->dtr_pending = 0;
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ if(aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Device is rejecting PPR messages, falling "
+ "back.\n", p->host_no, channel, target, lun);
+ }
+ if ( aic_dev->goal.width )
+ {
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 1;
+ aic_dev->dtr_pending = 1;
+ scb->flags |= SCB_MSGOUT_WDTR;
+ }
+ if ( aic_dev->goal.offset )
+ {
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 1;
+ if( !aic_dev->dtr_pending )
+ {
+ aic_dev->dtr_pending = 1;
+ scb->flags |= SCB_MSGOUT_SDTR;
+ }
+ }
+ if ( aic_dev->dtr_pending )
+ {
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGI) | ATNO, SCSISIGO);
+ }
+ }
+ else if (scb->flags & SCB_MSGOUT_WDTR)
+ {
+ /*
+ * note 8bit xfers and clear flag
+ */
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 0;
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ aic7xxx_set_width(p, target, channel, lun, MSG_EXT_WDTR_BUS_8_BIT,
+ (AHC_TRANS_ACTIVE|AHC_TRANS_GOAL|AHC_TRANS_CUR), aic_dev);
+ aic7xxx_set_syncrate(p, NULL, target, channel, 0, 0, 0,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE,
+ aic_dev);
+ if(aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Device is rejecting WDTR messages, using "
+ "narrow transfers.\n", p->host_no, channel, target, lun);
+ }
+ aic_dev->needsdtr = aic_dev->needsdtr_copy;
+ }
+ else if (scb->flags & SCB_MSGOUT_SDTR)
+ {
+ /*
+ * note asynch xfers and clear flag
+ */
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 0;
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ aic7xxx_set_syncrate(p, NULL, target, channel, 0, 0, 0,
+ (AHC_TRANS_CUR|AHC_TRANS_ACTIVE|AHC_TRANS_GOAL), aic_dev);
+ if(aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Device is rejecting SDTR messages, using "
+ "async transfers.\n", p->host_no, channel, target, lun);
+ }
+ }
+ else if (aic7xxx_verbose & VERBOSE_SEQINT)
+ {
+ /*
+ * Otherwise, we ignore it.
+ */
+ printk(INFO_LEAD "Received MESSAGE_REJECT for unknown cause. "
+ "Ignoring.\n", p->host_no, channel, target, lun);
+ }
+ }
+ break;
+
+ case BAD_STATUS:
+ {
+ unsigned char scb_index;
+ struct aic7xxx_hwscb *hscb;
+ Scsi_Cmnd *cmd;
+
+ /* The sequencer will notify us when a command has an error that
+ * would be of interest to the kernel. This allows us to leave
+ * the sequencer running in the common case of command completes
+ * without error. The sequencer will have DMA'd the SCB back
+ * up to us, so we can reference the drivers SCB array.
+ *
+ * Set the default return value to 0 indicating not to send
+ * sense. The sense code will change this if needed and this
+ * reduces code duplication.
+ */
+ aic_outb(p, 0, RETURN_1);
+ scb_index = aic_inb(p, SCB_TAG);
+ if (scb_index > p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "Invalid SCB during SEQINT 0x%02x, SCB_TAG %d.\n",
+ p->host_no, channel, target, lun, intstat, scb_index);
+ break;
+ }
+ scb = p->scb_data->scb_array[scb_index];
+ hscb = scb->hscb;
+
+ if (!(scb->flags & SCB_ACTIVE) || (scb->cmd == NULL))
+ {
+ printk(WARN_LEAD "Invalid SCB during SEQINT 0x%x, scb %d, flags 0x%x,"
+ " cmd 0x%lx.\n", p->host_no, channel, target, lun, intstat,
+ scb_index, scb->flags, (unsigned long) scb->cmd);
+ }
+ else
+ {
+ cmd = scb->cmd;
+ aic_dev = AIC_DEV(scb->cmd);
+ hscb->target_status = aic_inb(p, SCB_TARGET_STATUS);
+ aic7xxx_status(cmd) = hscb->target_status;
+
+ cmd->result = hscb->target_status;
+
+ switch (status_byte(hscb->target_status))
+ {
+ case GOOD:
+ if (aic7xxx_verbose & VERBOSE_SEQINT)
+ printk(INFO_LEAD "Interrupted for status of GOOD???\n",
+ p->host_no, CTL_OF_SCB(scb));
+ break;
+
+ case COMMAND_TERMINATED:
+ case CHECK_CONDITION:
+ if ( !(scb->flags & SCB_SENSE) )
+ {
+ /*
+ * Send a sense command to the requesting target.
+ * XXX - revisit this and get rid of the memcopys.
+ */
+ memcpy(scb->sense_cmd, &generic_sense[0],
+ sizeof(generic_sense));
+
+ scb->sense_cmd[1] = (cmd->device->lun << 5);
+ scb->sense_cmd[4] = sizeof(cmd->sense_buffer);
+
+ scb->sg_list[0].length =
+ cpu_to_le32(sizeof(cmd->sense_buffer));
+ scb->sg_list[0].address =
+ cpu_to_le32(pci_map_single(p->pdev, cmd->sense_buffer,
+ sizeof(cmd->sense_buffer),
+ PCI_DMA_FROMDEVICE));
+
+ /*
+ * XXX - We should allow disconnection, but can't as it
+ * might allow overlapped tagged commands.
+ */
+ /* hscb->control &= DISCENB; */
+ hscb->control = 0;
+ hscb->target_status = 0;
+ hscb->SG_list_pointer =
+ cpu_to_le32(SCB_DMA_ADDR(scb, scb->sg_list));
+ hscb->SCSI_cmd_pointer =
+ cpu_to_le32(SCB_DMA_ADDR(scb, scb->sense_cmd));
+ hscb->data_count = scb->sg_list[0].length;
+ hscb->data_pointer = scb->sg_list[0].address;
+ hscb->SCSI_cmd_length = COMMAND_SIZE(scb->sense_cmd[0]);
+ hscb->residual_SG_segment_count = 0;
+ hscb->residual_data_count[0] = 0;
+ hscb->residual_data_count[1] = 0;
+ hscb->residual_data_count[2] = 0;
+
+ scb->sg_count = hscb->SG_segment_count = 1;
+ scb->sg_length = sizeof(cmd->sense_buffer);
+ scb->tag_action = 0;
+ scb->flags |= SCB_SENSE;
+ /*
+ * Ensure the target is busy since this will be an
+ * an untagged request.
+ */
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ if (scb->flags & SCB_MSGOUT_BITS)
+ printk(INFO_LEAD "Requesting SENSE with %s\n", p->host_no,
+ CTL_OF_SCB(scb), (scb->flags & SCB_MSGOUT_SDTR) ?
+ "SDTR" : "WDTR");
+ else
+ printk(INFO_LEAD "Requesting SENSE, no MSG\n", p->host_no,
+ CTL_OF_SCB(scb));
+ }
+#endif
+ aic7xxx_busy_target(p, scb);
+ aic_outb(p, SEND_SENSE, RETURN_1);
+ aic7xxx_error(cmd) = DID_OK;
+ break;
+ } /* first time sense, no errors */
+ printk(INFO_LEAD "CHECK_CONDITION on REQUEST_SENSE, returning "
+ "an error.\n", p->host_no, CTL_OF_SCB(scb));
+ aic7xxx_error(cmd) = DID_ERROR;
+ scb->flags &= ~SCB_SENSE;
+ break;
+
+ case QUEUE_FULL:
+ queue_flag = TRUE; /* Mark that this is a QUEUE_FULL and */
+ case BUSY: /* drop through to here */
+ {
+ struct aic7xxx_scb *next_scbp, *prev_scbp;
+ unsigned char active_hscb, next_hscb, prev_hscb, scb_index;
+ /*
+ * We have to look three places for queued commands:
+ * 1: p->waiting_scbs queue
+ * 2: QINFIFO
+ * 3: WAITING_SCBS list on card (for commands that are started
+ * but haven't yet made it to the device)
+ *
+ * Of special note here is that commands on 2 or 3 above will
+ * have already been marked as active, while commands on 1 will
+ * not. The aic7xxx_done() function will want to unmark them
+ * from active, so any commands we pull off of 1 need to
+ * up the active count.
+ */
+ next_scbp = p->waiting_scbs.head;
+ while ( next_scbp != NULL )
+ {
+ prev_scbp = next_scbp;
+ next_scbp = next_scbp->q_next;
+ if ( aic7xxx_match_scb(p, prev_scbp, target, channel, lun,
+ SCB_LIST_NULL) )
+ {
+ scbq_remove(&p->waiting_scbs, prev_scbp);
+ scb->flags = SCB_QUEUED_FOR_DONE | SCB_QUEUE_FULL;
+ p->activescbs++;
+ aic_dev->active_cmds++;
+ }
+ }
+ aic7xxx_search_qinfifo(p, target, channel, lun,
+ SCB_LIST_NULL, SCB_QUEUED_FOR_DONE | SCB_QUEUE_FULL,
+ FALSE, NULL);
+ next_scbp = NULL;
+ active_hscb = aic_inb(p, SCBPTR);
+ prev_hscb = next_hscb = scb_index = SCB_LIST_NULL;
+ next_hscb = aic_inb(p, WAITING_SCBH);
+ while (next_hscb != SCB_LIST_NULL)
+ {
+ aic_outb(p, next_hscb, SCBPTR);
+ scb_index = aic_inb(p, SCB_TAG);
+ if (scb_index < p->scb_data->numscbs)
+ {
+ next_scbp = p->scb_data->scb_array[scb_index];
+ if (aic7xxx_match_scb(p, next_scbp, target, channel, lun,
+ SCB_LIST_NULL) )
+ {
+ next_scbp->flags = SCB_QUEUED_FOR_DONE | SCB_QUEUE_FULL;
+ next_hscb = aic_inb(p, SCB_NEXT);
+ aic_outb(p, 0, SCB_CONTROL);
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic7xxx_add_curscb_to_free_list(p);
+ if (prev_hscb == SCB_LIST_NULL)
+ {
+ /* We were first on the list,
+ * so we kill the selection
+ * hardware. Let the sequencer
+ * re-init the hardware itself
+ */
+ aic_outb(p, aic_inb(p, SCSISEQ) & ~ENSELO, SCSISEQ);
+ aic_outb(p, CLRSELTIMEO, CLRSINT1);
+ aic_outb(p, next_hscb, WAITING_SCBH);
+ }
+ else
+ {
+ aic_outb(p, prev_hscb, SCBPTR);
+ aic_outb(p, next_hscb, SCB_NEXT);
+ }
+ }
+ else
+ {
+ prev_hscb = next_hscb;
+ next_hscb = aic_inb(p, SCB_NEXT);
+ }
+ } /* scb_index >= p->scb_data->numscbs */
+ }
+ aic_outb(p, active_hscb, SCBPTR);
+ aic7xxx_run_done_queue(p, FALSE);
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if( (aic7xxx_verbose & VERBOSE_MINOR_ERROR) ||
+ (aic7xxx_verbose > 0xffff) )
+ {
+ if (queue_flag)
+ printk(INFO_LEAD "Queue full received; queue depth %d, "
+ "active %d\n", p->host_no, CTL_OF_SCB(scb),
+ aic_dev->max_q_depth, aic_dev->active_cmds);
+ else
+ printk(INFO_LEAD "Target busy\n", p->host_no, CTL_OF_SCB(scb));
+ }
+#endif
+ if (queue_flag)
+ {
+ int diff;
+ result = scsi_track_queue_full(cmd->device,
+ aic_dev->active_cmds);
+ if ( result < 0 )
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ printk(INFO_LEAD "Tagged Command Queueing disabled.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ diff = aic_dev->max_q_depth - p->host->cmd_per_lun;
+ aic_dev->temp_q_depth = 1;
+ aic_dev->max_q_depth = 1;
+ }
+ else if ( result > 0 )
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ printk(INFO_LEAD "Queue depth reduced to %d\n", p->host_no,
+ CTL_OF_SCB(scb), result);
+ diff = aic_dev->max_q_depth - result;
+ aic_dev->max_q_depth = result;
+ /* temp_q_depth could have been dropped to 1 for an untagged
+ * command that might be coming up */
+ if(aic_dev->temp_q_depth > result)
+ aic_dev->temp_q_depth = result;
+ }
+ /* We should free up the no unused SCB entries. But, that's
+ * a difficult thing to do because we use a direct indexed
+ * array, so we can't just take any entries and free them,
+ * we *have* to free the ones at the end of the array, and
+ * they very well could be in use right now, which means
+ * in order to do this right, we have to add a delayed
+ * freeing mechanism tied into the scb_free() code area.
+ * We'll add that later.
+ */
+ }
+ break;
+ }
+
+ default:
+ if (aic7xxx_verbose & VERBOSE_SEQINT)
+ printk(INFO_LEAD "Unexpected target status 0x%x.\n", p->host_no,
+ CTL_OF_SCB(scb), scb->hscb->target_status);
+ if (!aic7xxx_error(cmd))
+ {
+ aic7xxx_error(cmd) = DID_RETRY_COMMAND;
+ }
+ break;
+ } /* end switch */
+ } /* end else of */
+ }
+ break;
+
+ case AWAITING_MSG:
+ {
+ unsigned char scb_index, msg_out;
+
+ scb_index = aic_inb(p, SCB_TAG);
+ msg_out = aic_inb(p, MSG_OUT);
+ scb = p->scb_data->scb_array[scb_index];
+ aic_dev = AIC_DEV(scb->cmd);
+ p->msg_index = p->msg_len = 0;
+ /*
+ * This SCB had a MK_MESSAGE set in its control byte informing
+ * the sequencer that we wanted to send a special message to
+ * this target.
+ */
+
+ if ( !(scb->flags & SCB_DEVICE_RESET) &&
+ (msg_out == MSG_IDENTIFYFLAG) &&
+ (scb->hscb->control & TAG_ENB) )
+ {
+ p->msg_buf[p->msg_index++] = scb->tag_action;
+ p->msg_buf[p->msg_index++] = scb->hscb->tag;
+ p->msg_len += 2;
+ }
+
+ if (scb->flags & SCB_DEVICE_RESET)
+ {
+ p->msg_buf[p->msg_index++] = MSG_BUS_DEV_RESET;
+ p->msg_len++;
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Bus device reset mailed.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ else if (scb->flags & SCB_ABORT)
+ {
+ if (scb->tag_action)
+ {
+ p->msg_buf[p->msg_index++] = MSG_ABORT_TAG;
+ }
+ else
+ {
+ p->msg_buf[p->msg_index++] = MSG_ABORT;
+ }
+ p->msg_len++;
+ if (aic7xxx_verbose & VERBOSE_ABORT_PROCESS)
+ printk(INFO_LEAD "Abort message mailed.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ }
+ else if (scb->flags & SCB_MSGOUT_PPR)
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Sending PPR (%d/%d/%d/%d) message.\n",
+ p->host_no, CTL_OF_SCB(scb),
+ aic_dev->goal.period,
+ aic_dev->goal.offset,
+ aic_dev->goal.width,
+ aic_dev->goal.options);
+ }
+ aic7xxx_construct_ppr(p, scb);
+ }
+ else if (scb->flags & SCB_MSGOUT_WDTR)
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Sending WDTR message.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ }
+ aic7xxx_construct_wdtr(p, aic_dev->goal.width);
+ }
+ else if (scb->flags & SCB_MSGOUT_SDTR)
+ {
+ unsigned int max_sync, period;
+ unsigned char options = 0;
+ /*
+ * Now that the device is selected, use the bits in SBLKCTL and
+ * SSTAT2 to determine the max sync rate for this device.
+ */
+ if (p->features & AHC_ULTRA2)
+ {
+ if ( (aic_inb(p, SBLKCTL) & ENAB40) &&
+ !(aic_inb(p, SSTAT2) & EXP_ACTIVE) )
+ {
+ max_sync = AHC_SYNCRATE_ULTRA2;
+ }
+ else
+ {
+ max_sync = AHC_SYNCRATE_ULTRA;
+ }
+ }
+ else if (p->features & AHC_ULTRA)
+ {
+ max_sync = AHC_SYNCRATE_ULTRA;
+ }
+ else
+ {
+ max_sync = AHC_SYNCRATE_FAST;
+ }
+ period = aic_dev->goal.period;
+ aic7xxx_find_syncrate(p, &period, max_sync, &options);
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Sending SDTR %d/%d message.\n", p->host_no,
+ CTL_OF_SCB(scb), period,
+ aic_dev->goal.offset);
+ }
+ aic7xxx_construct_sdtr(p, period, aic_dev->goal.offset);
+ }
+ else
+ {
+ panic("aic7xxx: AWAITING_MSG for an SCB that does "
+ "not have a waiting message.\n");
+ }
+ /*
+ * We've set everything up to send our message, now to actually do
+ * so we need to enable reqinit interrupts and let the interrupt
+ * handler do the rest. We don't want to unpause the sequencer yet
+ * though so we'll return early. We also have to make sure that
+ * we clear the SEQINT *BEFORE* we set the REQINIT handler active
+ * or else it's possible on VLB cards to lose the first REQINIT
+ * interrupt. Edge triggered EISA cards could also lose this
+ * interrupt, although PCI and level triggered cards should not
+ * have this problem since they continually interrupt the kernel
+ * until we take care of the situation.
+ */
+ scb->flags |= SCB_MSGOUT_SENT;
+ p->msg_index = 0;
+ p->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
+ p->flags |= AHC_HANDLING_REQINITS;
+ aic_outb(p, aic_inb(p, SIMODE1) | ENREQINIT, SIMODE1);
+ return;
+ }
+ break;
+
+ case DATA_OVERRUN:
+ {
+ unsigned char scb_index = aic_inb(p, SCB_TAG);
+ unsigned char lastphase = aic_inb(p, LASTPHASE);
+ unsigned int i;
+
+ scb = (p->scb_data->scb_array[scb_index]);
+ /*
+ * XXX - What do we really want to do on an overrun? The
+ * mid-level SCSI code should handle this, but for now,
+ * we'll just indicate that the command should retried.
+ * If we retrieved sense info on this target, then the
+ * base SENSE info should have been saved prior to the
+ * overrun error. In that case, we return DID_OK and let
+ * the mid level code pick up on the sense info. Otherwise
+ * we return DID_ERROR so the command will get retried.
+ */
+ if ( !(scb->flags & SCB_SENSE) )
+ {
+ printk(WARN_LEAD "Data overrun detected in %s phase, tag %d;\n",
+ p->host_no, CTL_OF_SCB(scb),
+ (lastphase == P_DATAIN) ? "Data-In" : "Data-Out", scb->hscb->tag);
+ printk(KERN_WARNING " %s seen Data Phase. Length=%d, NumSGs=%d.\n",
+ (aic_inb(p, SEQ_FLAGS) & DPHASE) ? "Have" : "Haven't",
+ scb->sg_length, scb->sg_count);
+ printk(KERN_WARNING " Raw SCSI Command: 0x");
+ for (i = 0; i < scb->hscb->SCSI_cmd_length; i++)
+ {
+ printk("%02x ", scb->cmd->cmnd[i]);
+ }
+ printk("\n");
+ if(aic7xxx_verbose > 0xffff)
+ {
+ for (i = 0; i < scb->sg_count; i++)
+ {
+ printk(KERN_WARNING " sg[%d] - Addr 0x%x : Length %d\n",
+ i,
+ le32_to_cpu(scb->sg_list[i].address),
+ le32_to_cpu(scb->sg_list[i].length) );
+ }
+ }
+ aic7xxx_error(scb->cmd) = DID_ERROR;
+ }
+ else
+ printk(INFO_LEAD "Data Overrun during SEND_SENSE operation.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ break;
+
+ case WIDE_RESIDUE:
+ {
+ unsigned char resid_sgcnt, index;
+ unsigned char scb_index = aic_inb(p, SCB_TAG);
+ unsigned int cur_addr, resid_dcnt;
+ unsigned int native_addr, native_length, sg_addr;
+ int i;
+
+ if(scb_index > p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "invalid scb_index during WIDE_RESIDUE.\n",
+ p->host_no, -1, -1, -1);
+ /*
+ * XXX: Add error handling here
+ */
+ break;
+ }
+ scb = p->scb_data->scb_array[scb_index];
+ if(!(scb->flags & SCB_ACTIVE) || (scb->cmd == NULL))
+ {
+ printk(WARN_LEAD "invalid scb during WIDE_RESIDUE flags:0x%x "
+ "scb->cmd:0x%lx\n", p->host_no, CTL_OF_SCB(scb),
+ scb->flags, (unsigned long)scb->cmd);
+ break;
+ }
+ if(aic7xxx_verbose & VERBOSE_MINOR_ERROR)
+ printk(INFO_LEAD "Got WIDE_RESIDUE message, patching up data "
+ "pointer.\n", p->host_no, CTL_OF_SCB(scb));
+
+ /*
+ * We have a valid scb to use on this WIDE_RESIDUE message, so
+ * we need to walk the sg list looking for this particular sg
+ * segment, then see if we happen to be at the very beginning of
+ * the segment. If we are, then we have to back things up to
+ * the previous segment. If not, then we simply need to remove
+ * one byte from this segments address and add one to the byte
+ * count.
+ */
+ cur_addr = aic_inb(p, SHADDR) | (aic_inb(p, SHADDR + 1) << 8) |
+ (aic_inb(p, SHADDR + 2) << 16) | (aic_inb(p, SHADDR + 3) << 24);
+ sg_addr = aic_inb(p, SG_COUNT + 1) | (aic_inb(p, SG_COUNT + 2) << 8) |
+ (aic_inb(p, SG_COUNT + 3) << 16) | (aic_inb(p, SG_COUNT + 4) << 24);
+ resid_sgcnt = aic_inb(p, SCB_RESID_SGCNT);
+ resid_dcnt = aic_inb(p, SCB_RESID_DCNT) |
+ (aic_inb(p, SCB_RESID_DCNT + 1) << 8) |
+ (aic_inb(p, SCB_RESID_DCNT + 2) << 16);
+ index = scb->sg_count - ((resid_sgcnt) ? resid_sgcnt : 1);
+ native_addr = le32_to_cpu(scb->sg_list[index].address);
+ native_length = le32_to_cpu(scb->sg_list[index].length);
+ /*
+ * If resid_dcnt == native_length, then we just loaded this SG
+ * segment and we need to back it up one...
+ */
+ if(resid_dcnt == native_length)
+ {
+ if(index == 0)
+ {
+ /*
+ * Oops, this isn't right, we can't back up to before the
+ * beginning. This must be a bogus message, ignore it.
+ */
+ break;
+ }
+ resid_dcnt = 1;
+ resid_sgcnt += 1;
+ native_addr = le32_to_cpu(scb->sg_list[index - 1].address);
+ native_length = le32_to_cpu(scb->sg_list[index - 1].length);
+ cur_addr = native_addr + (native_length - 1);
+ sg_addr -= sizeof(struct hw_scatterlist);
+ }
+ else
+ {
+ /*
+ * resid_dcnt != native_length, so we are in the middle of a SG
+ * element. Back it up one byte and leave the rest alone.
+ */
+ resid_dcnt += 1;
+ cur_addr -= 1;
+ }
+
+ /*
+ * Output the new addresses and counts to the right places on the
+ * card.
+ */
+ aic_outb(p, resid_sgcnt, SG_COUNT);
+ aic_outb(p, resid_sgcnt, SCB_RESID_SGCNT);
+ aic_outb(p, sg_addr & 0xff, SG_COUNT + 1);
+ aic_outb(p, (sg_addr >> 8) & 0xff, SG_COUNT + 2);
+ aic_outb(p, (sg_addr >> 16) & 0xff, SG_COUNT + 3);
+ aic_outb(p, (sg_addr >> 24) & 0xff, SG_COUNT + 4);
+ aic_outb(p, resid_dcnt & 0xff, SCB_RESID_DCNT);
+ aic_outb(p, (resid_dcnt >> 8) & 0xff, SCB_RESID_DCNT + 1);
+ aic_outb(p, (resid_dcnt >> 16) & 0xff, SCB_RESID_DCNT + 2);
+
+ /*
+ * The sequencer actually wants to find the new address
+ * in the SHADDR register set. On the Ultra2 and later controllers
+ * this register set is readonly. In order to get the right number
+ * into the register, you actually have to enter it in HADDR and then
+ * use the PRELOADEN bit of DFCNTRL to drop it through from the
+ * HADDR register to the SHADDR register. On non-Ultra2 controllers,
+ * we simply write it direct.
+ */
+ if(p->features & AHC_ULTRA2)
+ {
+ /*
+ * We might as well be accurate and drop both the resid_dcnt and
+ * cur_addr into HCNT and HADDR and have both of them drop
+ * through to the shadow layer together.
+ */
+ aic_outb(p, resid_dcnt & 0xff, HCNT);
+ aic_outb(p, (resid_dcnt >> 8) & 0xff, HCNT + 1);
+ aic_outb(p, (resid_dcnt >> 16) & 0xff, HCNT + 2);
+ aic_outb(p, cur_addr & 0xff, HADDR);
+ aic_outb(p, (cur_addr >> 8) & 0xff, HADDR + 1);
+ aic_outb(p, (cur_addr >> 16) & 0xff, HADDR + 2);
+ aic_outb(p, (cur_addr >> 24) & 0xff, HADDR + 3);
+ aic_outb(p, aic_inb(p, DMAPARAMS) | PRELOADEN, DFCNTRL);
+ udelay(1);
+ aic_outb(p, aic_inb(p, DMAPARAMS) & ~(SCSIEN|HDMAEN), DFCNTRL);
+ i=0;
+ while(((aic_inb(p, DFCNTRL) & (SCSIEN|HDMAEN)) != 0) && (i++ < 1000))
+ {
+ udelay(1);
+ }
+ }
+ else
+ {
+ aic_outb(p, cur_addr & 0xff, SHADDR);
+ aic_outb(p, (cur_addr >> 8) & 0xff, SHADDR + 1);
+ aic_outb(p, (cur_addr >> 16) & 0xff, SHADDR + 2);
+ aic_outb(p, (cur_addr >> 24) & 0xff, SHADDR + 3);
+ }
+ }
+ break;
+
+ case SEQ_SG_FIXUP:
+ {
+ unsigned char scb_index, tmp;
+ int sg_addr, sg_length;
+
+ scb_index = aic_inb(p, SCB_TAG);
+
+ if(scb_index > p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "invalid scb_index during SEQ_SG_FIXUP.\n",
+ p->host_no, -1, -1, -1);
+ printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 "
+ "0x%x\n", p->host_no, -1, -1, -1,
+ aic_inb(p, SCSISIGI),
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, SSTAT0), aic_inb(p, SSTAT1));
+ printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n",
+ p->host_no, -1, -1, -1, aic_inb(p, SG_CACHEPTR),
+ aic_inb(p, SSTAT2), aic_inb(p, STCNT + 2) << 16 |
+ aic_inb(p, STCNT + 1) << 8 | aic_inb(p, STCNT));
+ /*
+ * XXX: Add error handling here
+ */
+ break;
+ }
+ scb = p->scb_data->scb_array[scb_index];
+ if(!(scb->flags & SCB_ACTIVE) || (scb->cmd == NULL))
+ {
+ printk(WARN_LEAD "invalid scb during SEQ_SG_FIXUP flags:0x%x "
+ "scb->cmd:0x%p\n", p->host_no, CTL_OF_SCB(scb),
+ scb->flags, scb->cmd);
+ printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 "
+ "0x%x\n", p->host_no, CTL_OF_SCB(scb),
+ aic_inb(p, SCSISIGI),
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, SSTAT0), aic_inb(p, SSTAT1));
+ printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n",
+ p->host_no, CTL_OF_SCB(scb), aic_inb(p, SG_CACHEPTR),
+ aic_inb(p, SSTAT2), aic_inb(p, STCNT + 2) << 16 |
+ aic_inb(p, STCNT + 1) << 8 | aic_inb(p, STCNT));
+ break;
+ }
+ if(aic7xxx_verbose & VERBOSE_MINOR_ERROR)
+ printk(INFO_LEAD "Fixing up SG address for sequencer.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ /*
+ * Advance the SG pointer to the next element in the list
+ */
+ tmp = aic_inb(p, SG_NEXT);
+ tmp += SG_SIZEOF;
+ aic_outb(p, tmp, SG_NEXT);
+ if( tmp < SG_SIZEOF )
+ aic_outb(p, aic_inb(p, SG_NEXT + 1) + 1, SG_NEXT + 1);
+ tmp = aic_inb(p, SG_COUNT) - 1;
+ aic_outb(p, tmp, SG_COUNT);
+ sg_addr = le32_to_cpu(scb->sg_list[scb->sg_count - tmp].address);
+ sg_length = le32_to_cpu(scb->sg_list[scb->sg_count - tmp].length);
+ /*
+ * Now stuff the element we just advanced past down onto the
+ * card so it can be stored in the residual area.
+ */
+ aic_outb(p, sg_addr & 0xff, HADDR);
+ aic_outb(p, (sg_addr >> 8) & 0xff, HADDR + 1);
+ aic_outb(p, (sg_addr >> 16) & 0xff, HADDR + 2);
+ aic_outb(p, (sg_addr >> 24) & 0xff, HADDR + 3);
+ aic_outb(p, sg_length & 0xff, HCNT);
+ aic_outb(p, (sg_length >> 8) & 0xff, HCNT + 1);
+ aic_outb(p, (sg_length >> 16) & 0xff, HCNT + 2);
+ aic_outb(p, (tmp << 2) | ((tmp == 1) ? LAST_SEG : 0), SG_CACHEPTR);
+ aic_outb(p, aic_inb(p, DMAPARAMS), DFCNTRL);
+ while(aic_inb(p, SSTAT0) & SDONE) udelay(1);
+ while(aic_inb(p, DFCNTRL) & (HDMAEN|SCSIEN)) aic_outb(p, 0, DFCNTRL);
+ }
+ break;
+
+#ifdef AIC7XXX_NOT_YET
+ case TRACEPOINT2:
+ {
+ printk(INFO_LEAD "Tracepoint #2 reached.\n", p->host_no,
+ channel, target, lun);
+ }
+ break;
+
+ /* XXX Fill these in later */
+ case MSG_BUFFER_BUSY:
+ printk("aic7xxx: Message buffer busy.\n");
+ break;
+ case MSGIN_PHASEMIS:
+ printk("aic7xxx: Message-in phasemis.\n");
+ break;
+#endif
+
+ default: /* unknown */
+ printk(WARN_LEAD "Unknown SEQINT, INTSTAT 0x%x, SCSISIGI 0x%x.\n",
+ p->host_no, channel, target, lun, intstat,
+ aic_inb(p, SCSISIGI));
+ break;
+ }
+
+ /*
+ * Clear the sequencer interrupt and unpause the sequencer.
+ */
+ unpause_sequencer(p, /* unpause always */ TRUE);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_parse_msg
+ *
+ * Description:
+ * Parses incoming messages into actions on behalf of
+ * aic7xxx_handle_reqinit
+ *_F*************************************************************************/
+static int
+aic7xxx_parse_msg(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ int reject, reply, done;
+ unsigned char target_scsirate, tindex;
+ unsigned short target_mask;
+ unsigned char target, channel, lun;
+ unsigned char bus_width, new_bus_width;
+ unsigned char trans_options, new_trans_options;
+ unsigned int period, new_period, offset, new_offset, maxsync;
+ struct aic7xxx_syncrate *syncrate;
+ struct aic_dev_data *aic_dev;
+
+ target = scb->cmd->device->id;
+ channel = scb->cmd->device->channel;
+ lun = scb->cmd->device->lun;
+ reply = reject = done = FALSE;
+ tindex = TARGET_INDEX(scb->cmd);
+ aic_dev = AIC_DEV(scb->cmd);
+ target_scsirate = aic_inb(p, TARG_SCSIRATE + tindex);
+ target_mask = (0x01 << tindex);
+
+ /*
+ * Parse as much of the message as is available,
+ * rejecting it if we don't support it. When
+ * the entire message is available and has been
+ * handled, return TRUE indicating that we have
+ * parsed an entire message.
+ */
+
+ if (p->msg_buf[0] != MSG_EXTENDED)
+ {
+ reject = TRUE;
+ }
+
+ /*
+ * Even if we are an Ultra3 card, don't allow Ultra3 sync rates when
+ * using the SDTR messages. We need the PPR messages to enable the
+ * higher speeds that include things like Dual Edge clocking.
+ */
+ if (p->features & AHC_ULTRA2)
+ {
+ if ( (aic_inb(p, SBLKCTL) & ENAB40) &&
+ !(aic_inb(p, SSTAT2) & EXP_ACTIVE) )
+ {
+ if (p->features & AHC_ULTRA3)
+ maxsync = AHC_SYNCRATE_ULTRA3;
+ else
+ maxsync = AHC_SYNCRATE_ULTRA2;
+ }
+ else
+ {
+ maxsync = AHC_SYNCRATE_ULTRA;
+ }
+ }
+ else if (p->features & AHC_ULTRA)
+ {
+ maxsync = AHC_SYNCRATE_ULTRA;
+ }
+ else
+ {
+ maxsync = AHC_SYNCRATE_FAST;
+ }
+
+ /*
+ * Just accept the length byte outright and perform
+ * more checking once we know the message type.
+ */
+
+ if ( !reject && (p->msg_len > 2) )
+ {
+ switch(p->msg_buf[2])
+ {
+ case MSG_EXT_SDTR:
+ {
+
+ if (p->msg_buf[1] != MSG_EXT_SDTR_LEN)
+ {
+ reject = TRUE;
+ break;
+ }
+
+ if (p->msg_len < (MSG_EXT_SDTR_LEN + 2))
+ {
+ break;
+ }
+
+ period = new_period = p->msg_buf[3];
+ offset = new_offset = p->msg_buf[4];
+ trans_options = new_trans_options = 0;
+ bus_width = new_bus_width = target_scsirate & WIDEXFER;
+
+ /*
+ * If our current max syncrate is in the Ultra3 range, bump it back
+ * down to Ultra2 since we can't negotiate DT transfers using SDTR
+ */
+ if(maxsync == AHC_SYNCRATE_ULTRA3)
+ maxsync = AHC_SYNCRATE_ULTRA2;
+
+ /*
+ * We might have a device that is starting negotiation with us
+ * before we can start up negotiation with it....be prepared to
+ * have a device ask for a higher speed then we want to give it
+ * in that case
+ */
+ if ( (scb->flags & (SCB_MSGOUT_SENT|SCB_MSGOUT_SDTR)) !=
+ (SCB_MSGOUT_SENT|SCB_MSGOUT_SDTR) )
+ {
+ if (!(aic_dev->flags & DEVICE_DTR_SCANNED))
+ {
+ /*
+ * We shouldn't get here unless this is a narrow drive, wide
+ * devices should trigger this same section of code in the WDTR
+ * handler first instead.
+ */
+ aic_dev->goal.width = MSG_EXT_WDTR_BUS_8_BIT;
+ aic_dev->goal.options = 0;
+ if(p->user[tindex].offset)
+ {
+ aic_dev->needsdtr_copy = 1;
+ aic_dev->goal.period = max_t(unsigned char, 10,p->user[tindex].period);
+ if(p->features & AHC_ULTRA2)
+ {
+ aic_dev->goal.offset = MAX_OFFSET_ULTRA2;
+ }
+ else
+ {
+ aic_dev->goal.offset = MAX_OFFSET_8BIT;
+ }
+ }
+ else
+ {
+ aic_dev->needsdtr_copy = 0;
+ aic_dev->goal.period = 255;
+ aic_dev->goal.offset = 0;
+ }
+ aic_dev->flags |= DEVICE_DTR_SCANNED | DEVICE_PRINT_DTR;
+ }
+ else if (aic_dev->needsdtr_copy == 0)
+ {
+ /*
+ * This is a preemptive message from the target, we've already
+ * scanned this target and set our options for it, and we
+ * don't need a SDTR with this target (for whatever reason),
+ * so reject this incoming SDTR
+ */
+ reject = TRUE;
+ break;
+ }
+
+ /* The device is sending this message first and we have to reply */
+ reply = TRUE;
+
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Received pre-emptive SDTR message from "
+ "target.\n", p->host_no, CTL_OF_SCB(scb));
+ }
+ /*
+ * Validate the values the device passed to us against our SEEPROM
+ * settings. We don't have to do this if we aren't replying since
+ * the device isn't allowed to send values greater than the ones
+ * we first sent to it.
+ */
+ new_period = max_t(unsigned int, period, aic_dev->goal.period);
+ new_offset = min_t(unsigned int, offset, aic_dev->goal.offset);
+ }
+
+ /*
+ * Use our new_period, new_offset, bus_width, and card options
+ * to determine the actual syncrate settings
+ */
+ syncrate = aic7xxx_find_syncrate(p, &new_period, maxsync,
+ &trans_options);
+ aic7xxx_validate_offset(p, syncrate, &new_offset, bus_width);
+
+ /*
+ * Did we drop to async? If so, send a reply regardless of whether
+ * or not we initiated this negotiation.
+ */
+ if ((new_offset == 0) && (new_offset != offset))
+ {
+ aic_dev->needsdtr_copy = 0;
+ reply = TRUE;
+ }
+
+ /*
+ * Did we start this, if not, or if we went too low and had to
+ * go async, then send an SDTR back to the target
+ */
+ if(reply)
+ {
+ /* when sending a reply, make sure that the goal settings are
+ * updated along with current and active since the code that
+ * will actually build the message for the sequencer uses the
+ * goal settings as its guidelines.
+ */
+ aic7xxx_set_syncrate(p, syncrate, target, channel, new_period,
+ new_offset, trans_options,
+ AHC_TRANS_GOAL|AHC_TRANS_ACTIVE|AHC_TRANS_CUR,
+ aic_dev);
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ scb->flags |= SCB_MSGOUT_SDTR;
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGO) | ATNO, SCSISIGO);
+ }
+ else
+ {
+ aic7xxx_set_syncrate(p, syncrate, target, channel, new_period,
+ new_offset, trans_options,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR, aic_dev);
+ aic_dev->needsdtr = 0;
+ }
+ done = TRUE;
+ break;
+ }
+ case MSG_EXT_WDTR:
+ {
+
+ if (p->msg_buf[1] != MSG_EXT_WDTR_LEN)
+ {
+ reject = TRUE;
+ break;
+ }
+
+ if (p->msg_len < (MSG_EXT_WDTR_LEN + 2))
+ {
+ break;
+ }
+
+ bus_width = new_bus_width = p->msg_buf[3];
+
+ if ( (scb->flags & (SCB_MSGOUT_SENT|SCB_MSGOUT_WDTR)) ==
+ (SCB_MSGOUT_SENT|SCB_MSGOUT_WDTR) )
+ {
+ switch(bus_width)
+ {
+ default:
+ {
+ reject = TRUE;
+ if ( (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ ((aic_dev->flags & DEVICE_PRINT_DTR) ||
+ (aic7xxx_verbose > 0xffff)) )
+ {
+ printk(INFO_LEAD "Requesting %d bit transfers, rejecting.\n",
+ p->host_no, CTL_OF_SCB(scb), 8 * (0x01 << bus_width));
+ }
+ } /* We fall through on purpose */
+ case MSG_EXT_WDTR_BUS_8_BIT:
+ {
+ aic_dev->goal.width = MSG_EXT_WDTR_BUS_8_BIT;
+ aic_dev->needwdtr_copy &= ~target_mask;
+ break;
+ }
+ case MSG_EXT_WDTR_BUS_16_BIT:
+ {
+ break;
+ }
+ }
+ aic_dev->needwdtr = 0;
+ aic7xxx_set_width(p, target, channel, lun, new_bus_width,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR, aic_dev);
+ }
+ else
+ {
+ if ( !(aic_dev->flags & DEVICE_DTR_SCANNED) )
+ {
+ /*
+ * Well, we now know the WDTR and SYNC caps of this device since
+ * it contacted us first, mark it as such and copy the user stuff
+ * over to the goal stuff.
+ */
+ if( (p->features & AHC_WIDE) && p->user[tindex].width )
+ {
+ aic_dev->goal.width = MSG_EXT_WDTR_BUS_16_BIT;
+ aic_dev->needwdtr_copy = 1;
+ }
+
+ /*
+ * Devices that support DT transfers don't start WDTR requests
+ */
+ aic_dev->goal.options = 0;
+
+ if(p->user[tindex].offset)
+ {
+ aic_dev->needsdtr_copy = 1;
+ aic_dev->goal.period = max_t(unsigned char, 10, p->user[tindex].period);
+ if(p->features & AHC_ULTRA2)
+ {
+ aic_dev->goal.offset = MAX_OFFSET_ULTRA2;
+ }
+ else if( aic_dev->goal.width )
+ {
+ aic_dev->goal.offset = MAX_OFFSET_16BIT;
+ }
+ else
+ {
+ aic_dev->goal.offset = MAX_OFFSET_8BIT;
+ }
+ } else {
+ aic_dev->needsdtr_copy = 0;
+ aic_dev->goal.period = 255;
+ aic_dev->goal.offset = 0;
+ }
+
+ aic_dev->flags |= DEVICE_DTR_SCANNED | DEVICE_PRINT_DTR;
+ }
+ else if (aic_dev->needwdtr_copy == 0)
+ {
+ /*
+ * This is a preemptive message from the target, we've already
+ * scanned this target and set our options for it, and we
+ * don't need a WDTR with this target (for whatever reason),
+ * so reject this incoming WDTR
+ */
+ reject = TRUE;
+ break;
+ }
+
+ /* The device is sending this message first and we have to reply */
+ reply = TRUE;
+
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Received pre-emptive WDTR message from "
+ "target.\n", p->host_no, CTL_OF_SCB(scb));
+ }
+ switch(bus_width)
+ {
+ case MSG_EXT_WDTR_BUS_16_BIT:
+ {
+ if ( (p->features & AHC_WIDE) &&
+ (aic_dev->goal.width == MSG_EXT_WDTR_BUS_16_BIT) )
+ {
+ new_bus_width = MSG_EXT_WDTR_BUS_16_BIT;
+ break;
+ }
+ } /* Fall through if we aren't a wide card */
+ default:
+ case MSG_EXT_WDTR_BUS_8_BIT:
+ {
+ aic_dev->needwdtr_copy = 0;
+ new_bus_width = MSG_EXT_WDTR_BUS_8_BIT;
+ break;
+ }
+ }
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ scb->flags |= SCB_MSGOUT_WDTR;
+ aic_dev->needwdtr = 0;
+ if(aic_dev->dtr_pending == 0)
+ {
+ /* there is no other command with SCB_DTR_SCB already set that will
+ * trigger the release of the dtr_pending bit. Both set the bit
+ * and set scb->flags |= SCB_DTR_SCB
+ */
+ aic_dev->dtr_pending = 1;
+ scb->flags |= SCB_DTR_SCB;
+ }
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGO) | ATNO, SCSISIGO);
+ /* when sending a reply, make sure that the goal settings are
+ * updated along with current and active since the code that
+ * will actually build the message for the sequencer uses the
+ * goal settings as its guidelines.
+ */
+ aic7xxx_set_width(p, target, channel, lun, new_bus_width,
+ AHC_TRANS_GOAL|AHC_TRANS_ACTIVE|AHC_TRANS_CUR,
+ aic_dev);
+ }
+
+ /*
+ * By virtue of the SCSI spec, a WDTR message negates any existing
+ * SDTR negotiations. So, even if needsdtr isn't marked for this
+ * device, we still have to do a new SDTR message if the device
+ * supports SDTR at all. Therefore, we check needsdtr_copy instead
+ * of needstr.
+ */
+ aic7xxx_set_syncrate(p, NULL, target, channel, 0, 0, 0,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE,
+ aic_dev);
+ aic_dev->needsdtr = aic_dev->needsdtr_copy;
+ done = TRUE;
+ break;
+ }
+ case MSG_EXT_PPR:
+ {
+
+ if (p->msg_buf[1] != MSG_EXT_PPR_LEN)
+ {
+ reject = TRUE;
+ break;
+ }
+
+ if (p->msg_len < (MSG_EXT_PPR_LEN + 2))
+ {
+ break;
+ }
+
+ period = new_period = p->msg_buf[3];
+ offset = new_offset = p->msg_buf[5];
+ bus_width = new_bus_width = p->msg_buf[6];
+ trans_options = new_trans_options = p->msg_buf[7] & 0xf;
+
+ if(aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Parsing PPR message (%d/%d/%d/%d)\n",
+ p->host_no, CTL_OF_SCB(scb), period, offset, bus_width,
+ trans_options);
+ }
+
+ /*
+ * We might have a device that is starting negotiation with us
+ * before we can start up negotiation with it....be prepared to
+ * have a device ask for a higher speed then we want to give it
+ * in that case
+ */
+ if ( (scb->flags & (SCB_MSGOUT_SENT|SCB_MSGOUT_PPR)) !=
+ (SCB_MSGOUT_SENT|SCB_MSGOUT_PPR) )
+ {
+ /* Have we scanned the device yet? */
+ if (!(aic_dev->flags & DEVICE_DTR_SCANNED))
+ {
+ /* The device is electing to use PPR messages, so we will too until
+ * we know better */
+ aic_dev->needppr = aic_dev->needppr_copy = 1;
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 0;
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 0;
+
+ /* We know the device is SCSI-3 compliant due to PPR */
+ aic_dev->flags |= DEVICE_SCSI_3;
+
+ /*
+ * Not only is the device starting this up, but it also hasn't
+ * been scanned yet, so this would likely be our TUR or our
+ * INQUIRY command at scan time, so we need to use the
+ * settings from the SEEPROM if they existed. Of course, even
+ * if we didn't find a SEEPROM, we stuffed default values into
+ * the user settings anyway, so use those in all cases.
+ */
+ aic_dev->goal.width = p->user[tindex].width;
+ if(p->user[tindex].offset)
+ {
+ aic_dev->goal.period = p->user[tindex].period;
+ aic_dev->goal.options = p->user[tindex].options;
+ if(p->features & AHC_ULTRA2)
+ {
+ aic_dev->goal.offset = MAX_OFFSET_ULTRA2;
+ }
+ else if( aic_dev->goal.width &&
+ (bus_width == MSG_EXT_WDTR_BUS_16_BIT) &&
+ p->features & AHC_WIDE )
+ {
+ aic_dev->goal.offset = MAX_OFFSET_16BIT;
+ }
+ else
+ {
+ aic_dev->goal.offset = MAX_OFFSET_8BIT;
+ }
+ }
+ else
+ {
+ aic_dev->goal.period = 255;
+ aic_dev->goal.offset = 0;
+ aic_dev->goal.options = 0;
+ }
+ aic_dev->flags |= DEVICE_DTR_SCANNED | DEVICE_PRINT_DTR;
+ }
+ else if (aic_dev->needppr_copy == 0)
+ {
+ /*
+ * This is a preemptive message from the target, we've already
+ * scanned this target and set our options for it, and we
+ * don't need a PPR with this target (for whatever reason),
+ * so reject this incoming PPR
+ */
+ reject = TRUE;
+ break;
+ }
+
+ /* The device is sending this message first and we have to reply */
+ reply = TRUE;
+
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Received pre-emptive PPR message from "
+ "target.\n", p->host_no, CTL_OF_SCB(scb));
+ }
+
+ }
+
+ switch(bus_width)
+ {
+ case MSG_EXT_WDTR_BUS_16_BIT:
+ {
+ if ( (aic_dev->goal.width == MSG_EXT_WDTR_BUS_16_BIT) &&
+ p->features & AHC_WIDE)
+ {
+ break;
+ }
+ }
+ default:
+ {
+ if ( (aic7xxx_verbose & VERBOSE_NEGOTIATION2) &&
+ ((aic_dev->flags & DEVICE_PRINT_DTR) ||
+ (aic7xxx_verbose > 0xffff)) )
+ {
+ reply = TRUE;
+ printk(INFO_LEAD "Requesting %d bit transfers, rejecting.\n",
+ p->host_no, CTL_OF_SCB(scb), 8 * (0x01 << bus_width));
+ }
+ } /* We fall through on purpose */
+ case MSG_EXT_WDTR_BUS_8_BIT:
+ {
+ /*
+ * According to the spec, if we aren't wide, we also can't be
+ * Dual Edge so clear the options byte
+ */
+ new_trans_options = 0;
+ new_bus_width = MSG_EXT_WDTR_BUS_8_BIT;
+ break;
+ }
+ }
+
+ if(reply)
+ {
+ /* when sending a reply, make sure that the goal settings are
+ * updated along with current and active since the code that
+ * will actually build the message for the sequencer uses the
+ * goal settings as its guidelines.
+ */
+ aic7xxx_set_width(p, target, channel, lun, new_bus_width,
+ AHC_TRANS_GOAL|AHC_TRANS_ACTIVE|AHC_TRANS_CUR,
+ aic_dev);
+ syncrate = aic7xxx_find_syncrate(p, &new_period, maxsync,
+ &new_trans_options);
+ aic7xxx_validate_offset(p, syncrate, &new_offset, new_bus_width);
+ aic7xxx_set_syncrate(p, syncrate, target, channel, new_period,
+ new_offset, new_trans_options,
+ AHC_TRANS_GOAL|AHC_TRANS_ACTIVE|AHC_TRANS_CUR,
+ aic_dev);
+ }
+ else
+ {
+ aic7xxx_set_width(p, target, channel, lun, new_bus_width,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR, aic_dev);
+ syncrate = aic7xxx_find_syncrate(p, &new_period, maxsync,
+ &new_trans_options);
+ aic7xxx_validate_offset(p, syncrate, &new_offset, new_bus_width);
+ aic7xxx_set_syncrate(p, syncrate, target, channel, new_period,
+ new_offset, new_trans_options,
+ AHC_TRANS_ACTIVE|AHC_TRANS_CUR, aic_dev);
+ }
+
+ /*
+ * As it turns out, if we don't *have* to have PPR messages, then
+ * configure ourselves not to use them since that makes some
+ * external drive chassis work (those chassis can't parse PPR
+ * messages and they mangle the SCSI bus until you send a WDTR
+ * and SDTR that they can understand).
+ */
+ if(new_trans_options == 0)
+ {
+ aic_dev->needppr = aic_dev->needppr_copy = 0;
+ if(new_offset)
+ {
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 1;
+ }
+ if (new_bus_width)
+ {
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 1;
+ }
+ }
+
+ if((new_offset == 0) && (offset != 0))
+ {
+ /*
+ * Oops, the syncrate went to low for this card and we fell off
+ * to async (should never happen with a device that uses PPR
+ * messages, but have to be complete)
+ */
+ reply = TRUE;
+ }
+
+ if(reply)
+ {
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ scb->flags |= SCB_MSGOUT_PPR;
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGO) | ATNO, SCSISIGO);
+ }
+ else
+ {
+ aic_dev->needppr = 0;
+ }
+ done = TRUE;
+ break;
+ }
+ default:
+ {
+ reject = TRUE;
+ break;
+ }
+ } /* end of switch(p->msg_type) */
+ } /* end of if (!reject && (p->msg_len > 2)) */
+
+ if (!reply && reject)
+ {
+ aic_outb(p, MSG_MESSAGE_REJECT, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGO) | ATNO, SCSISIGO);
+ done = TRUE;
+ }
+ return(done);
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_handle_reqinit
+ *
+ * Description:
+ * Interrupt handler for REQINIT interrupts (used to transfer messages to
+ * and from devices).
+ *_F*************************************************************************/
+static void
+aic7xxx_handle_reqinit(struct aic7xxx_host *p, struct aic7xxx_scb *scb)
+{
+ unsigned char lastbyte;
+ unsigned char phasemis;
+ int done = FALSE;
+
+ switch(p->msg_type)
+ {
+ case MSG_TYPE_INITIATOR_MSGOUT:
+ {
+ if (p->msg_len == 0)
+ panic("aic7xxx: REQINIT with no active message!\n");
+
+ lastbyte = (p->msg_index == (p->msg_len - 1));
+ phasemis = ( aic_inb(p, SCSISIGI) & PHASE_MASK) != P_MESGOUT;
+
+ if (lastbyte || phasemis)
+ {
+ /* Time to end the message */
+ p->msg_len = 0;
+ p->msg_type = MSG_TYPE_NONE;
+ /*
+ * NOTE-TO-MYSELF: If you clear the REQINIT after you
+ * disable REQINITs, then cases of REJECT_MSG stop working
+ * and hang the bus
+ */
+ aic_outb(p, aic_inb(p, SIMODE1) & ~ENREQINIT, SIMODE1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+
+ if (phasemis == 0)
+ {
+ aic_outb(p, p->msg_buf[p->msg_index], SINDEX);
+ aic_outb(p, 0, RETURN_1);
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "Completed sending of REQINIT message.\n",
+ p->host_no, CTL_OF_SCB(scb));
+#endif
+ }
+ else
+ {
+ aic_outb(p, MSGOUT_PHASEMIS, RETURN_1);
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "PHASEMIS while sending REQINIT message.\n",
+ p->host_no, CTL_OF_SCB(scb));
+#endif
+ }
+ unpause_sequencer(p, TRUE);
+ }
+ else
+ {
+ /*
+ * Present the byte on the bus (clearing REQINIT) but don't
+ * unpause the sequencer.
+ */
+ aic_outb(p, CLRREQINIT, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ aic_outb(p, p->msg_buf[p->msg_index++], SCSIDATL);
+ }
+ break;
+ }
+ case MSG_TYPE_INITIATOR_MSGIN:
+ {
+ phasemis = ( aic_inb(p, SCSISIGI) & PHASE_MASK ) != P_MESGIN;
+
+ if (phasemis == 0)
+ {
+ p->msg_len++;
+ /* Pull the byte in without acking it */
+ p->msg_buf[p->msg_index] = aic_inb(p, SCSIBUSL);
+ done = aic7xxx_parse_msg(p, scb);
+ /* Ack the byte */
+ aic_outb(p, CLRREQINIT, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ aic_inb(p, SCSIDATL);
+ p->msg_index++;
+ }
+ if (phasemis || done)
+ {
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ {
+ if (phasemis)
+ printk(INFO_LEAD "PHASEMIS while receiving REQINIT message.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ else
+ printk(INFO_LEAD "Completed receipt of REQINIT message.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+#endif
+ /* Time to end our message session */
+ p->msg_len = 0;
+ p->msg_type = MSG_TYPE_NONE;
+ aic_outb(p, aic_inb(p, SIMODE1) & ~ENREQINIT, SIMODE1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+ unpause_sequencer(p, TRUE);
+ }
+ break;
+ }
+ default:
+ {
+ panic("aic7xxx: Unknown REQINIT message type.\n");
+ break;
+ }
+ } /* End of switch(p->msg_type) */
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_handle_scsiint
+ *
+ * Description:
+ * Interrupt handler for SCSI interrupts (SCSIINT).
+ *-F*************************************************************************/
+static void
+aic7xxx_handle_scsiint(struct aic7xxx_host *p, unsigned char intstat)
+{
+ unsigned char scb_index;
+ unsigned char status;
+ struct aic7xxx_scb *scb;
+ struct aic_dev_data *aic_dev;
+
+ scb_index = aic_inb(p, SCB_TAG);
+ status = aic_inb(p, SSTAT1);
+
+ if (scb_index < p->scb_data->numscbs)
+ {
+ scb = p->scb_data->scb_array[scb_index];
+ if ((scb->flags & SCB_ACTIVE) == 0)
+ {
+ scb = NULL;
+ }
+ }
+ else
+ {
+ scb = NULL;
+ }
+
+
+ if ((status & SCSIRSTI) != 0)
+ {
+ int channel;
+
+ if ( (p->chip & AHC_CHIPID_MASK) == AHC_AIC7770 )
+ channel = (aic_inb(p, SBLKCTL) & SELBUSB) >> 3;
+ else
+ channel = 0;
+
+ if (aic7xxx_verbose & VERBOSE_RESET)
+ printk(WARN_LEAD "Someone else reset the channel!!\n",
+ p->host_no, channel, -1, -1);
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, NULL);
+ /*
+ * Go through and abort all commands for the channel, but do not
+ * reset the channel again.
+ */
+ aic7xxx_reset_channel(p, channel, /* Initiate Reset */ FALSE);
+ aic7xxx_run_done_queue(p, TRUE);
+ scb = NULL;
+ }
+ else if ( ((status & BUSFREE) != 0) && ((status & SELTO) == 0) )
+ {
+ /*
+ * First look at what phase we were last in. If it's message-out,
+ * chances are pretty good that the bus free was in response to
+ * one of our abort requests.
+ */
+ unsigned char lastphase = aic_inb(p, LASTPHASE);
+ unsigned char saved_tcl = aic_inb(p, SAVED_TCL);
+ unsigned char target = (saved_tcl >> 4) & 0x0F;
+ int channel;
+ int printerror = TRUE;
+
+ if ( (p->chip & AHC_CHIPID_MASK) == AHC_AIC7770 )
+ channel = (aic_inb(p, SBLKCTL) & SELBUSB) >> 3;
+ else
+ channel = 0;
+
+ aic_outb(p, aic_inb(p, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP),
+ SCSISEQ);
+ if (lastphase == P_MESGOUT)
+ {
+ unsigned char message;
+
+ message = aic_inb(p, SINDEX);
+
+ if ((message == MSG_ABORT) || (message == MSG_ABORT_TAG))
+ {
+ if (aic7xxx_verbose & VERBOSE_ABORT_PROCESS)
+ printk(INFO_LEAD "SCB %d abort delivered.\n", p->host_no,
+ CTL_OF_SCB(scb), scb->hscb->tag);
+ aic7xxx_reset_device(p, target, channel, ALL_LUNS,
+ (message == MSG_ABORT) ? SCB_LIST_NULL : scb->hscb->tag );
+ aic7xxx_run_done_queue(p, TRUE);
+ scb = NULL;
+ printerror = 0;
+ }
+ else if (message == MSG_BUS_DEV_RESET)
+ {
+ aic7xxx_handle_device_reset(p, target, channel);
+ scb = NULL;
+ printerror = 0;
+ }
+ }
+ if ( (scb != NULL) && (scb->flags & SCB_DTR_SCB) )
+ {
+ /*
+ * Hmmm...error during a negotiation command. Either we have a
+ * borken bus, or the device doesn't like our negotiation message.
+ * Since we check the INQUIRY data of a device before sending it
+ * negotiation messages, assume the bus is borken for whatever
+ * reason. Complete the command.
+ */
+ printerror = 0;
+ aic7xxx_reset_device(p, target, channel, ALL_LUNS, scb->hscb->tag);
+ aic7xxx_run_done_queue(p, TRUE);
+ scb = NULL;
+ }
+ if (printerror != 0)
+ {
+ if (scb != NULL)
+ {
+ unsigned char tag;
+
+ if ((scb->hscb->control & TAG_ENB) != 0)
+ {
+ tag = scb->hscb->tag;
+ }
+ else
+ {
+ tag = SCB_LIST_NULL;
+ }
+ aic7xxx_reset_device(p, target, channel, ALL_LUNS, tag);
+ aic7xxx_run_done_queue(p, TRUE);
+ }
+ else
+ {
+ aic7xxx_reset_device(p, target, channel, ALL_LUNS, SCB_LIST_NULL);
+ aic7xxx_run_done_queue(p, TRUE);
+ }
+ printk(INFO_LEAD "Unexpected busfree, LASTPHASE = 0x%x, "
+ "SEQADDR = 0x%x\n", p->host_no, channel, target, -1, lastphase,
+ (aic_inb(p, SEQADDR1) << 8) | aic_inb(p, SEQADDR0));
+ scb = NULL;
+ }
+ aic_outb(p, MSG_NOOP, MSG_OUT);
+ aic_outb(p, aic_inb(p, SIMODE1) & ~(ENBUSFREE|ENREQINIT),
+ SIMODE1);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+ aic_outb(p, CLRBUSFREE, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ restart_sequencer(p);
+ unpause_sequencer(p, TRUE);
+ }
+ else if ((status & SELTO) != 0)
+ {
+ unsigned char scbptr;
+ unsigned char nextscb;
+ Scsi_Cmnd *cmd;
+
+ scbptr = aic_inb(p, WAITING_SCBH);
+ if (scbptr > p->scb_data->maxhscbs)
+ {
+ /*
+ * I'm still trying to track down exactly how this happens, but until
+ * I find it, this code will make sure we aren't passing bogus values
+ * into the SCBPTR register, even if that register will just wrap
+ * things around, we still don't like having out of range variables.
+ *
+ * NOTE: Don't check the aic7xxx_verbose variable, I want this message
+ * to always be displayed.
+ */
+ printk(INFO_LEAD "Invalid WAITING_SCBH value %d, improvising.\n",
+ p->host_no, -1, -1, -1, scbptr);
+ if (p->scb_data->maxhscbs > 4)
+ scbptr &= (p->scb_data->maxhscbs - 1);
+ else
+ scbptr &= 0x03;
+ }
+ aic_outb(p, scbptr, SCBPTR);
+ scb_index = aic_inb(p, SCB_TAG);
+
+ scb = NULL;
+ if (scb_index < p->scb_data->numscbs)
+ {
+ scb = p->scb_data->scb_array[scb_index];
+ if ((scb->flags & SCB_ACTIVE) == 0)
+ {
+ scb = NULL;
+ }
+ }
+ if (scb == NULL)
+ {
+ printk(WARN_LEAD "Referenced SCB %d not valid during SELTO.\n",
+ p->host_no, -1, -1, -1, scb_index);
+ printk(KERN_WARNING " SCSISEQ = 0x%x SEQADDR = 0x%x SSTAT0 = 0x%x "
+ "SSTAT1 = 0x%x\n", aic_inb(p, SCSISEQ),
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, SSTAT0), aic_inb(p, SSTAT1));
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, NULL);
+ }
+ else
+ {
+ cmd = scb->cmd;
+ cmd->result = (DID_TIME_OUT << 16);
+
+ /*
+ * Clear out this hardware SCB
+ */
+ aic_outb(p, 0, SCB_CONTROL);
+
+ /*
+ * Clear out a few values in the card that are in an undetermined
+ * state.
+ */
+ aic_outb(p, MSG_NOOP, MSG_OUT);
+
+ /*
+ * Shift the waiting for selection queue forward
+ */
+ nextscb = aic_inb(p, SCB_NEXT);
+ aic_outb(p, nextscb, WAITING_SCBH);
+
+ /*
+ * Put this SCB back on the free list.
+ */
+ aic7xxx_add_curscb_to_free_list(p);
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "Selection Timeout.\n", p->host_no, CTL_OF_SCB(scb));
+#endif
+ if (scb->flags & SCB_QUEUED_ABORT)
+ {
+ /*
+ * We know that this particular SCB had to be the queued abort since
+ * the disconnected SCB would have gotten a reconnect instead.
+ * What we need to do then is to let the command timeout again so
+ * we get a reset since this abort just failed.
+ */
+ cmd->result = 0;
+ scb = NULL;
+ }
+ }
+ /*
+ * Keep the sequencer from trying to restart any selections
+ */
+ aic_outb(p, aic_inb(p, SCSISEQ) & ~ENSELO, SCSISEQ);
+ /*
+ * Make sure the data bits on the bus are released
+ * Don't do this on 7770 chipsets, it makes them give us
+ * a BRKADDRINT and kills the card.
+ */
+ if( (p->chip & ~AHC_CHIPID_MASK) == AHC_PCI )
+ aic_outb(p, 0, SCSIBUSL);
+
+ /*
+ * Delay for the selection timeout delay period then stop the selection
+ */
+ udelay(301);
+ aic_outb(p, CLRSELINGO, CLRSINT0);
+ /*
+ * Clear out all the interrupt status bits
+ */
+ aic_outb(p, aic_inb(p, SIMODE1) & ~(ENREQINIT|ENBUSFREE), SIMODE1);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+ aic_outb(p, CLRSELTIMEO | CLRBUSFREE, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ /*
+ * Restarting the sequencer will stop the selection and make sure devices
+ * are allowed to reselect in.
+ */
+ restart_sequencer(p);
+ unpause_sequencer(p, TRUE);
+ }
+ else if (scb == NULL)
+ {
+ printk(WARN_LEAD "aic7xxx_isr - referenced scb not valid "
+ "during scsiint 0x%x scb(%d)\n"
+ " SIMODE0 0x%x, SIMODE1 0x%x, SSTAT0 0x%x, SEQADDR 0x%x\n",
+ p->host_no, -1, -1, -1, status, scb_index, aic_inb(p, SIMODE0),
+ aic_inb(p, SIMODE1), aic_inb(p, SSTAT0),
+ (aic_inb(p, SEQADDR1) << 8) | aic_inb(p, SEQADDR0));
+ /*
+ * Turn off the interrupt and set status to zero, so that it
+ * falls through the rest of the SCSIINT code.
+ */
+ aic_outb(p, status, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ unpause_sequencer(p, /* unpause always */ TRUE);
+ scb = NULL;
+ }
+ else if (status & SCSIPERR)
+ {
+ /*
+ * Determine the bus phase and queue an appropriate message.
+ */
+ char *phase;
+ Scsi_Cmnd *cmd;
+ unsigned char mesg_out = MSG_NOOP;
+ unsigned char lastphase = aic_inb(p, LASTPHASE);
+ unsigned char sstat2 = aic_inb(p, SSTAT2);
+
+ cmd = scb->cmd;
+ switch (lastphase)
+ {
+ case P_DATAOUT:
+ phase = "Data-Out";
+ break;
+ case P_DATAIN:
+ phase = "Data-In";
+ mesg_out = MSG_INITIATOR_DET_ERR;
+ break;
+ case P_COMMAND:
+ phase = "Command";
+ break;
+ case P_MESGOUT:
+ phase = "Message-Out";
+ break;
+ case P_STATUS:
+ phase = "Status";
+ mesg_out = MSG_INITIATOR_DET_ERR;
+ break;
+ case P_MESGIN:
+ phase = "Message-In";
+ mesg_out = MSG_PARITY_ERROR;
+ break;
+ default:
+ phase = "unknown";
+ break;
+ }
+
+ /*
+ * A parity error has occurred during a data
+ * transfer phase. Flag it and continue.
+ */
+ if( (p->features & AHC_ULTRA3) &&
+ (aic_inb(p, SCSIRATE) & AHC_SYNCRATE_CRC) &&
+ (lastphase == P_DATAIN) )
+ {
+ printk(WARN_LEAD "CRC error during %s phase.\n",
+ p->host_no, CTL_OF_SCB(scb), phase);
+ if(sstat2 & CRCVALERR)
+ {
+ printk(WARN_LEAD " CRC error in intermediate CRC packet.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ if(sstat2 & CRCENDERR)
+ {
+ printk(WARN_LEAD " CRC error in ending CRC packet.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ if(sstat2 & CRCREQERR)
+ {
+ printk(WARN_LEAD " Target incorrectly requested a CRC packet.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ if(sstat2 & DUAL_EDGE_ERROR)
+ {
+ printk(WARN_LEAD " Dual Edge transmission error.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ }
+ }
+ else if( (lastphase == P_MESGOUT) &&
+ (scb->flags & SCB_MSGOUT_PPR) )
+ {
+ /*
+ * As per the draft specs, any device capable of supporting any of
+ * the option values other than 0 are not allowed to reject the
+ * PPR message. Instead, they must negotiate out what they do
+ * support instead of rejecting our offering or else they cause
+ * a parity error during msg_out phase to signal that they don't
+ * like our settings.
+ */
+ aic_dev = AIC_DEV(scb->cmd);
+ aic_dev->needppr = aic_dev->needppr_copy = 0;
+ aic7xxx_set_width(p, scb->cmd->device->id, scb->cmd->device->channel, scb->cmd->device->lun,
+ MSG_EXT_WDTR_BUS_8_BIT,
+ (AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE),
+ aic_dev);
+ aic7xxx_set_syncrate(p, NULL, scb->cmd->device->id, scb->cmd->device->channel, 0, 0,
+ 0, AHC_TRANS_ACTIVE|AHC_TRANS_CUR|AHC_TRANS_QUITE,
+ aic_dev);
+ aic_dev->goal.options = 0;
+ scb->flags &= ~SCB_MSGOUT_BITS;
+ if(aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "parity error during PPR message, reverting "
+ "to WDTR/SDTR\n", p->host_no, CTL_OF_SCB(scb));
+ }
+ if ( aic_dev->goal.width )
+ {
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 1;
+ }
+ if ( aic_dev->goal.offset )
+ {
+ if( aic_dev->goal.period <= 9 )
+ {
+ aic_dev->goal.period = 10;
+ }
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 1;
+ }
+ scb = NULL;
+ }
+
+ /*
+ * We've set the hardware to assert ATN if we get a parity
+ * error on "in" phases, so all we need to do is stuff the
+ * message buffer with the appropriate message. "In" phases
+ * have set mesg_out to something other than MSG_NOP.
+ */
+ if (mesg_out != MSG_NOOP)
+ {
+ aic_outb(p, mesg_out, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGI) | ATNO, SCSISIGO);
+ scb = NULL;
+ }
+ aic_outb(p, CLRSCSIPERR, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ unpause_sequencer(p, /* unpause_always */ TRUE);
+ }
+ else if ( (status & REQINIT) &&
+ (p->flags & AHC_HANDLING_REQINITS) )
+ {
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic7xxx_verbose > 0xffff)
+ printk(INFO_LEAD "Handling REQINIT, SSTAT1=0x%x.\n", p->host_no,
+ CTL_OF_SCB(scb), aic_inb(p, SSTAT1));
+#endif
+ aic7xxx_handle_reqinit(p, scb);
+ return;
+ }
+ else
+ {
+ /*
+ * We don't know what's going on. Turn off the
+ * interrupt source and try to continue.
+ */
+ if (aic7xxx_verbose & VERBOSE_SCSIINT)
+ printk(INFO_LEAD "Unknown SCSIINT status, SSTAT1(0x%x).\n",
+ p->host_no, -1, -1, -1, status);
+ aic_outb(p, status, CLRSINT1);
+ aic_outb(p, CLRSCSIINT, CLRINT);
+ unpause_sequencer(p, /* unpause always */ TRUE);
+ scb = NULL;
+ }
+ if (scb != NULL)
+ {
+ aic7xxx_done(p, scb);
+ }
+}
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+static void
+aic7xxx_check_scbs(struct aic7xxx_host *p, char *buffer)
+{
+ unsigned char saved_scbptr, free_scbh, dis_scbh, wait_scbh, temp;
+ int i, bogus, lost;
+ static unsigned char scb_status[AIC7XXX_MAXSCB];
+
+#define SCB_NO_LIST 0
+#define SCB_FREE_LIST 1
+#define SCB_WAITING_LIST 2
+#define SCB_DISCONNECTED_LIST 4
+#define SCB_CURRENTLY_ACTIVE 8
+
+ /*
+ * Note, these checks will fail on a regular basis once the machine moves
+ * beyond the bus scan phase. The problem is race conditions concerning
+ * the scbs and where they are linked in. When you have 30 or so commands
+ * outstanding on the bus, and run this twice with every interrupt, the
+ * chances get pretty good that you'll catch the sequencer with an SCB
+ * only partially linked in. Therefore, once we pass the scan phase
+ * of the bus, we really should disable this function.
+ */
+ bogus = FALSE;
+ memset(&scb_status[0], 0, sizeof(scb_status));
+ pause_sequencer(p);
+ saved_scbptr = aic_inb(p, SCBPTR);
+ if (saved_scbptr >= p->scb_data->maxhscbs)
+ {
+ printk("Bogus SCBPTR %d\n", saved_scbptr);
+ bogus = TRUE;
+ }
+ scb_status[saved_scbptr] = SCB_CURRENTLY_ACTIVE;
+ free_scbh = aic_inb(p, FREE_SCBH);
+ if ( (free_scbh != SCB_LIST_NULL) &&
+ (free_scbh >= p->scb_data->maxhscbs) )
+ {
+ printk("Bogus FREE_SCBH %d\n", free_scbh);
+ bogus = TRUE;
+ }
+ else
+ {
+ temp = free_scbh;
+ while( (temp != SCB_LIST_NULL) && (temp < p->scb_data->maxhscbs) )
+ {
+ if(scb_status[temp] & 0x07)
+ {
+ printk("HSCB %d on multiple lists, status 0x%02x", temp,
+ scb_status[temp] | SCB_FREE_LIST);
+ bogus = TRUE;
+ }
+ scb_status[temp] |= SCB_FREE_LIST;
+ aic_outb(p, temp, SCBPTR);
+ temp = aic_inb(p, SCB_NEXT);
+ }
+ }
+
+ dis_scbh = aic_inb(p, DISCONNECTED_SCBH);
+ if ( (dis_scbh != SCB_LIST_NULL) &&
+ (dis_scbh >= p->scb_data->maxhscbs) )
+ {
+ printk("Bogus DISCONNECTED_SCBH %d\n", dis_scbh);
+ bogus = TRUE;
+ }
+ else
+ {
+ temp = dis_scbh;
+ while( (temp != SCB_LIST_NULL) && (temp < p->scb_data->maxhscbs) )
+ {
+ if(scb_status[temp] & 0x07)
+ {
+ printk("HSCB %d on multiple lists, status 0x%02x", temp,
+ scb_status[temp] | SCB_DISCONNECTED_LIST);
+ bogus = TRUE;
+ }
+ scb_status[temp] |= SCB_DISCONNECTED_LIST;
+ aic_outb(p, temp, SCBPTR);
+ temp = aic_inb(p, SCB_NEXT);
+ }
+ }
+
+ wait_scbh = aic_inb(p, WAITING_SCBH);
+ if ( (wait_scbh != SCB_LIST_NULL) &&
+ (wait_scbh >= p->scb_data->maxhscbs) )
+ {
+ printk("Bogus WAITING_SCBH %d\n", wait_scbh);
+ bogus = TRUE;
+ }
+ else
+ {
+ temp = wait_scbh;
+ while( (temp != SCB_LIST_NULL) && (temp < p->scb_data->maxhscbs) )
+ {
+ if(scb_status[temp] & 0x07)
+ {
+ printk("HSCB %d on multiple lists, status 0x%02x", temp,
+ scb_status[temp] | SCB_WAITING_LIST);
+ bogus = TRUE;
+ }
+ scb_status[temp] |= SCB_WAITING_LIST;
+ aic_outb(p, temp, SCBPTR);
+ temp = aic_inb(p, SCB_NEXT);
+ }
+ }
+
+ lost=0;
+ for(i=0; i < p->scb_data->maxhscbs; i++)
+ {
+ aic_outb(p, i, SCBPTR);
+ temp = aic_inb(p, SCB_NEXT);
+ if ( ((temp != SCB_LIST_NULL) &&
+ (temp >= p->scb_data->maxhscbs)) )
+ {
+ printk("HSCB %d bad, SCB_NEXT invalid(%d).\n", i, temp);
+ bogus = TRUE;
+ }
+ if ( temp == i )
+ {
+ printk("HSCB %d bad, SCB_NEXT points to self.\n", i);
+ bogus = TRUE;
+ }
+ if (scb_status[i] == 0)
+ lost++;
+ if (lost > 1)
+ {
+ printk("Too many lost scbs.\n");
+ bogus=TRUE;
+ }
+ }
+ aic_outb(p, saved_scbptr, SCBPTR);
+ unpause_sequencer(p, FALSE);
+ if (bogus)
+ {
+ printk("Bogus parameters found in card SCB array structures.\n");
+ printk("%s\n", buffer);
+ aic7xxx_panic_abort(p, NULL);
+ }
+ return;
+}
+#endif
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_handle_command_completion_intr
+ *
+ * Description:
+ * SCSI command completion interrupt handler.
+ *-F*************************************************************************/
+static void
+aic7xxx_handle_command_completion_intr(struct aic7xxx_host *p)
+{
+ struct aic7xxx_scb *scb = NULL;
+ struct aic_dev_data *aic_dev;
+ Scsi_Cmnd *cmd;
+ unsigned char scb_index, tindex;
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if( (p->isr_count < 16) && (aic7xxx_verbose > 0xffff) )
+ printk(INFO_LEAD "Command Complete Int.\n", p->host_no, -1, -1, -1);
+#endif
+
+ /*
+ * Read the INTSTAT location after clearing the CMDINT bit. This forces
+ * any posted PCI writes to flush to memory. Gerard Roudier suggested
+ * this fix to the possible race of clearing the CMDINT bit but not
+ * having all command bytes flushed onto the qoutfifo.
+ */
+ aic_outb(p, CLRCMDINT, CLRINT);
+ aic_inb(p, INTSTAT);
+ /*
+ * The sequencer will continue running when it
+ * issues this interrupt. There may be >1 commands
+ * finished, so loop until we've processed them all.
+ */
+
+ while (p->qoutfifo[p->qoutfifonext] != SCB_LIST_NULL)
+ {
+ scb_index = p->qoutfifo[p->qoutfifonext];
+ p->qoutfifo[p->qoutfifonext++] = SCB_LIST_NULL;
+ if ( scb_index >= p->scb_data->numscbs )
+ {
+ printk(WARN_LEAD "CMDCMPLT with invalid SCB index %d\n", p->host_no,
+ -1, -1, -1, scb_index);
+ continue;
+ }
+ scb = p->scb_data->scb_array[scb_index];
+ if (!(scb->flags & SCB_ACTIVE) || (scb->cmd == NULL))
+ {
+ printk(WARN_LEAD "CMDCMPLT without command for SCB %d, SCB flags "
+ "0x%x, cmd 0x%lx\n", p->host_no, -1, -1, -1, scb_index, scb->flags,
+ (unsigned long) scb->cmd);
+ continue;
+ }
+ tindex = TARGET_INDEX(scb->cmd);
+ aic_dev = AIC_DEV(scb->cmd);
+ if (scb->flags & SCB_QUEUED_ABORT)
+ {
+ pause_sequencer(p);
+ if ( ((aic_inb(p, LASTPHASE) & PHASE_MASK) != P_BUSFREE) &&
+ (aic_inb(p, SCB_TAG) == scb->hscb->tag) )
+ {
+ unpause_sequencer(p, FALSE);
+ continue;
+ }
+ aic7xxx_reset_device(p, scb->cmd->device->id, scb->cmd->device->channel,
+ scb->cmd->device->lun, scb->hscb->tag);
+ scb->flags &= ~(SCB_QUEUED_FOR_DONE | SCB_RESET | SCB_ABORT |
+ SCB_QUEUED_ABORT);
+ unpause_sequencer(p, FALSE);
+ }
+ else if (scb->flags & SCB_ABORT)
+ {
+ /*
+ * We started to abort this, but it completed on us, let it
+ * through as successful
+ */
+ scb->flags &= ~(SCB_ABORT|SCB_RESET);
+ }
+ else if (scb->flags & SCB_SENSE)
+ {
+ char *buffer = &scb->cmd->sense_buffer[0];
+
+ if (buffer[12] == 0x47 || buffer[12] == 0x54)
+ {
+ /*
+ * Signal that we need to re-negotiate things.
+ */
+ aic_dev->needppr = aic_dev->needppr_copy;
+ aic_dev->needsdtr = aic_dev->needsdtr_copy;
+ aic_dev->needwdtr = aic_dev->needwdtr_copy;
+ }
+ }
+ cmd = scb->cmd;
+ if (scb->hscb->residual_SG_segment_count != 0)
+ {
+ aic7xxx_calculate_residual(p, scb);
+ }
+ cmd->result |= (aic7xxx_error(cmd) << 16);
+ aic7xxx_done(p, scb);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_isr
+ *
+ * Description:
+ * SCSI controller interrupt handler.
+ *-F*************************************************************************/
+static void
+aic7xxx_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct aic7xxx_host *p;
+ unsigned char intstat;
+
+ p = (struct aic7xxx_host *)dev_id;
+
+ /*
+ * Just a few sanity checks. Make sure that we have an int pending.
+ * Also, if PCI, then we are going to check for a PCI bus error status
+ * should we get too many spurious interrupts.
+ */
+ if (!((intstat = aic_inb(p, INTSTAT)) & INT_PEND))
+ {
+#ifdef CONFIG_PCI
+ if ( (p->chip & AHC_PCI) && (p->spurious_int > 500) &&
+ !(p->flags & AHC_HANDLING_REQINITS) )
+ {
+ if ( aic_inb(p, ERROR) & PCIERRSTAT )
+ {
+ aic7xxx_pci_intr(p);
+ }
+ p->spurious_int = 0;
+ }
+ else if ( !(p->flags & AHC_HANDLING_REQINITS) )
+ {
+ p->spurious_int++;
+ }
+#endif
+ return;
+ }
+
+ p->spurious_int = 0;
+
+ /*
+ * Keep track of interrupts for /proc/scsi
+ */
+ p->isr_count++;
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if ( (p->isr_count < 16) && (aic7xxx_verbose > 0xffff) &&
+ (aic7xxx_panic_on_abort) && (p->flags & AHC_PAGESCBS) )
+ aic7xxx_check_scbs(p, "Bogus settings at start of interrupt.");
+#endif
+
+ /*
+ * Handle all the interrupt sources - especially for SCSI
+ * interrupts, we won't get a second chance at them.
+ */
+ if (intstat & CMDCMPLT)
+ {
+ aic7xxx_handle_command_completion_intr(p);
+ }
+
+ if (intstat & BRKADRINT)
+ {
+ int i;
+ unsigned char errno = aic_inb(p, ERROR);
+
+ printk(KERN_ERR "(scsi%d) BRKADRINT error(0x%x):\n", p->host_no, errno);
+ for (i = 0; i < ARRAY_SIZE(hard_error); i++)
+ {
+ if (errno & hard_error[i].errno)
+ {
+ printk(KERN_ERR " %s\n", hard_error[i].errmesg);
+ }
+ }
+ printk(KERN_ERR "(scsi%d) SEQADDR=0x%x\n", p->host_no,
+ (((aic_inb(p, SEQADDR1) << 8) & 0x100) | aic_inb(p, SEQADDR0)));
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, NULL);
+#ifdef CONFIG_PCI
+ if (errno & PCIERRSTAT)
+ aic7xxx_pci_intr(p);
+#endif
+ if (errno & (SQPARERR | ILLOPCODE | ILLSADDR))
+ {
+ panic("aic7xxx: unrecoverable BRKADRINT.\n");
+ }
+ if (errno & ILLHADDR)
+ {
+ printk(KERN_ERR "(scsi%d) BUG! Driver accessed chip without first "
+ "pausing controller!\n", p->host_no);
+ }
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (errno & DPARERR)
+ {
+ if (aic_inb(p, DMAPARAMS) & DIRECTION)
+ printk("(scsi%d) while DMAing SCB from host to card.\n", p->host_no);
+ else
+ printk("(scsi%d) while DMAing SCB from card to host.\n", p->host_no);
+ }
+#endif
+ aic_outb(p, CLRPARERR | CLRBRKADRINT, CLRINT);
+ unpause_sequencer(p, FALSE);
+ }
+
+ if (intstat & SEQINT)
+ {
+ /*
+ * Read the CCSCBCTL register to work around a bug in the Ultra2 cards
+ */
+ if(p->features & AHC_ULTRA2)
+ {
+ aic_inb(p, CCSCBCTL);
+ }
+ aic7xxx_handle_seqint(p, intstat);
+ }
+
+ if (intstat & SCSIINT)
+ {
+ aic7xxx_handle_scsiint(p, intstat);
+ }
+
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if ( (p->isr_count < 16) && (aic7xxx_verbose > 0xffff) &&
+ (aic7xxx_panic_on_abort) && (p->flags & AHC_PAGESCBS) )
+ aic7xxx_check_scbs(p, "Bogus settings at end of interrupt.");
+#endif
+
+}
+
+/*+F*************************************************************************
+ * Function:
+ * do_aic7xxx_isr
+ *
+ * Description:
+ * This is a gross hack to solve a problem in linux kernels 2.1.85 and
+ * above. Please, children, do not try this at home, and if you ever see
+ * anything like it, please inform the Gross Hack Police immediately
+ *-F*************************************************************************/
+static irqreturn_t
+do_aic7xxx_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long cpu_flags;
+ struct aic7xxx_host *p;
+
+ p = (struct aic7xxx_host *)dev_id;
+ if(!p)
+ return IRQ_NONE;
+ spin_lock_irqsave(p->host->host_lock, cpu_flags);
+ p->flags |= AHC_IN_ISR;
+ do
+ {
+ aic7xxx_isr(irq, dev_id, regs);
+ } while ( (aic_inb(p, INTSTAT) & INT_PEND) );
+ aic7xxx_done_cmds_complete(p);
+ aic7xxx_run_waiting_queues(p);
+ p->flags &= ~AHC_IN_ISR;
+ spin_unlock_irqrestore(p->host->host_lock, cpu_flags);
+
+ return IRQ_HANDLED;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_init_transinfo
+ *
+ * Description:
+ * Set up the initial aic_dev values from the BIOS settings and from
+ * INQUIRY results
+ *-F*************************************************************************/
+static void
+aic7xxx_init_transinfo(struct aic7xxx_host *p, struct aic_dev_data *aic_dev)
+{
+ Scsi_Device *sdpnt = aic_dev->SDptr;
+ unsigned char tindex;
+
+ tindex = sdpnt->id | (sdpnt->channel << 3);
+ if (!(aic_dev->flags & DEVICE_DTR_SCANNED))
+ {
+ aic_dev->flags |= DEVICE_DTR_SCANNED;
+
+ if ( sdpnt->wdtr && (p->features & AHC_WIDE) )
+ {
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 1;
+ aic_dev->goal.width = p->user[tindex].width;
+ }
+ else
+ {
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 0;
+ pause_sequencer(p);
+ aic7xxx_set_width(p, sdpnt->id, sdpnt->channel, sdpnt->lun,
+ MSG_EXT_WDTR_BUS_8_BIT, (AHC_TRANS_ACTIVE |
+ AHC_TRANS_GOAL |
+ AHC_TRANS_CUR), aic_dev );
+ unpause_sequencer(p, FALSE);
+ }
+ if ( sdpnt->sdtr && p->user[tindex].offset )
+ {
+ aic_dev->goal.period = p->user[tindex].period;
+ aic_dev->goal.options = p->user[tindex].options;
+ if (p->features & AHC_ULTRA2)
+ aic_dev->goal.offset = MAX_OFFSET_ULTRA2;
+ else if (aic_dev->goal.width == MSG_EXT_WDTR_BUS_16_BIT)
+ aic_dev->goal.offset = MAX_OFFSET_16BIT;
+ else
+ aic_dev->goal.offset = MAX_OFFSET_8BIT;
+ if ( sdpnt->ppr && p->user[tindex].period <= 9 &&
+ p->user[tindex].options )
+ {
+ aic_dev->needppr = aic_dev->needppr_copy = 1;
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 0;
+ aic_dev->needwdtr = aic_dev->needwdtr_copy = 0;
+ aic_dev->flags |= DEVICE_SCSI_3;
+ }
+ else
+ {
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 1;
+ aic_dev->goal.period = max_t(unsigned char, 10, aic_dev->goal.period);
+ aic_dev->goal.options = 0;
+ }
+ }
+ else
+ {
+ aic_dev->needsdtr = aic_dev->needsdtr_copy = 0;
+ aic_dev->goal.period = 255;
+ aic_dev->goal.offset = 0;
+ aic_dev->goal.options = 0;
+ }
+ aic_dev->flags |= DEVICE_PRINT_DTR;
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_slave_alloc
+ *
+ * Description:
+ * Set up the initial aic_dev struct pointers
+ *-F*************************************************************************/
+static int
+aic7xxx_slave_alloc(Scsi_Device *SDptr)
+{
+ struct aic7xxx_host *p = (struct aic7xxx_host *)SDptr->host->hostdata;
+ struct aic_dev_data *aic_dev;
+
+ aic_dev = kmalloc(sizeof(struct aic_dev_data), GFP_ATOMIC | GFP_KERNEL);
+ if(!aic_dev)
+ return 1;
+ /*
+ * Check to see if channel was scanned.
+ */
+
+ if (!(p->flags & AHC_A_SCANNED) && (SDptr->channel == 0))
+ {
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(INFO_LEAD "Scanning channel for devices.\n",
+ p->host_no, 0, -1, -1);
+ p->flags |= AHC_A_SCANNED;
+ }
+ else
+ {
+ if (!(p->flags & AHC_B_SCANNED) && (SDptr->channel == 1))
+ {
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(INFO_LEAD "Scanning channel for devices.\n",
+ p->host_no, 1, -1, -1);
+ p->flags |= AHC_B_SCANNED;
+ }
+ }
+
+ memset(aic_dev, 0, sizeof(struct aic_dev_data));
+ SDptr->hostdata = aic_dev;
+ aic_dev->SDptr = SDptr;
+ aic_dev->max_q_depth = 1;
+ aic_dev->temp_q_depth = 1;
+ scbq_init(&aic_dev->delayed_scbs);
+ INIT_LIST_HEAD(&aic_dev->list);
+ list_add_tail(&aic_dev->list, &p->aic_devs);
+ return 0;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_device_queue_depth
+ *
+ * Description:
+ * Determines the queue depth for a given device. There are two ways
+ * a queue depth can be obtained for a tagged queueing device. One
+ * way is the default queue depth which is determined by whether
+ * aic7xxx_default_queue_depth. The other is by the aic7xxx_tag_info
+ * array.
+ *
+ * If tagged queueing isn't supported on the device, then we set the
+ * depth to p->host->hostt->cmd_per_lun for internal driver queueing.
+ * as the default queue depth. Otherwise, we use either 4 or 8 as the
+ * default queue depth (dependent on the number of hardware SCBs).
+ * The other way we determine queue depth is through the use of the
+ * aic7xxx_tag_info array which is enabled by defining
+ * AIC7XXX_TAGGED_QUEUEING_BY_DEVICE. This array can be initialized
+ * with queue depths for individual devices. It also allows tagged
+ * queueing to be [en|dis]abled for a specific adapter.
+ *-F*************************************************************************/
+static void
+aic7xxx_device_queue_depth(struct aic7xxx_host *p, Scsi_Device *device)
+{
+ int tag_enabled = FALSE;
+ struct aic_dev_data *aic_dev = device->hostdata;
+ unsigned char tindex;
+
+ tindex = device->id | (device->channel << 3);
+
+ if (device->simple_tags)
+ return; // We've already enabled this device
+
+ if (device->tagged_supported)
+ {
+ tag_enabled = TRUE;
+
+ if (!(p->discenable & (1 << tindex)))
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ printk(INFO_LEAD "Disconnection disabled, unable to "
+ "enable tagged queueing.\n",
+ p->host_no, device->channel, device->id, device->lun);
+ tag_enabled = FALSE;
+ }
+ else
+ {
+ if (p->instance >= ARRAY_SIZE(aic7xxx_tag_info))
+ {
+ static int print_warning = TRUE;
+ if(print_warning)
+ {
+ printk(KERN_INFO "aic7xxx: WARNING, insufficient tag_info instances for"
+ " installed controllers.\n");
+ printk(KERN_INFO "aic7xxx: Please update the aic7xxx_tag_info array in"
+ " the aic7xxx.c source file.\n");
+ print_warning = FALSE;
+ }
+ aic_dev->max_q_depth = aic_dev->temp_q_depth =
+ aic7xxx_default_queue_depth;
+ }
+ else
+ {
+
+ if (aic7xxx_tag_info[p->instance].tag_commands[tindex] == 255)
+ {
+ tag_enabled = FALSE;
+ }
+ else if (aic7xxx_tag_info[p->instance].tag_commands[tindex] == 0)
+ {
+ aic_dev->max_q_depth = aic_dev->temp_q_depth =
+ aic7xxx_default_queue_depth;
+ }
+ else
+ {
+ aic_dev->max_q_depth = aic_dev->temp_q_depth =
+ aic7xxx_tag_info[p->instance].tag_commands[tindex];
+ }
+ }
+ }
+ }
+ if (tag_enabled)
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Tagged queuing enabled, queue depth %d.\n",
+ p->host_no, device->channel, device->id,
+ device->lun, aic_dev->max_q_depth);
+ }
+ scsi_adjust_queue_depth(device, MSG_ORDERED_TAG, aic_dev->max_q_depth);
+ }
+ else
+ {
+ if (aic7xxx_verbose & VERBOSE_NEGOTIATION2)
+ {
+ printk(INFO_LEAD "Tagged queuing disabled, queue depth %d.\n",
+ p->host_no, device->channel, device->id,
+ device->lun, device->host->cmd_per_lun);
+ }
+ scsi_adjust_queue_depth(device, 0, device->host->cmd_per_lun);
+ }
+ return;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_slave_destroy
+ *
+ * Description:
+ * prepare for this device to go away
+ *-F*************************************************************************/
+static void
+aic7xxx_slave_destroy(Scsi_Device *SDptr)
+{
+ struct aic_dev_data *aic_dev = SDptr->hostdata;
+
+ list_del(&aic_dev->list);
+ SDptr->hostdata = NULL;
+ kfree(aic_dev);
+ return;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_slave_configure
+ *
+ * Description:
+ * Configure the device we are attaching to the controller. This is
+ * where we get to do things like scan the INQUIRY data, set queue
+ * depths, allocate command structs, etc.
+ *-F*************************************************************************/
+static int
+aic7xxx_slave_configure(Scsi_Device *SDptr)
+{
+ struct aic7xxx_host *p = (struct aic7xxx_host *) SDptr->host->hostdata;
+ struct aic_dev_data *aic_dev;
+ int scbnum;
+
+ aic_dev = (struct aic_dev_data *)SDptr->hostdata;
+
+ aic7xxx_init_transinfo(p, aic_dev);
+ aic7xxx_device_queue_depth(p, SDptr);
+ if(list_empty(&aic_dev->list))
+ list_add_tail(&aic_dev->list, &p->aic_devs);
+
+ scbnum = 0;
+ list_for_each_entry(aic_dev, &p->aic_devs, list) {
+ scbnum += aic_dev->max_q_depth;
+ }
+ while (scbnum > p->scb_data->numscbs)
+ {
+ /*
+ * Pre-allocate the needed SCBs to get around the possibility of having
+ * to allocate some when memory is more or less exhausted and we need
+ * the SCB in order to perform a swap operation (possible deadlock)
+ */
+ if ( aic7xxx_allocate_scb(p) == 0 )
+ break;
+ }
+
+
+ return(0);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_probe
+ *
+ * Description:
+ * Probing for EISA boards: it looks like the first two bytes
+ * are a manufacturer code - three characters, five bits each:
+ *
+ * BYTE 0 BYTE 1 BYTE 2 BYTE 3
+ * ?1111122 22233333 PPPPPPPP RRRRRRRR
+ *
+ * The characters are baselined off ASCII '@', so add that value
+ * to each to get the real ASCII code for it. The next two bytes
+ * appear to be a product and revision number, probably vendor-
+ * specific. This is what is being searched for at each port,
+ * and what should probably correspond to the ID= field in the
+ * ECU's .cfg file for the card - if your card is not detected,
+ * make sure your signature is listed in the array.
+ *
+ * The fourth byte's lowest bit seems to be an enabled/disabled
+ * flag (rest of the bits are reserved?).
+ *
+ * NOTE: This function is only needed on Intel and Alpha platforms,
+ * the other platforms we support don't have EISA/VLB busses. So,
+ * we #ifdef this entire function to avoid compiler warnings about
+ * an unused function.
+ *-F*************************************************************************/
+#if defined(__i386__) || defined(__alpha__)
+static int
+aic7xxx_probe(int slot, int base, ahc_flag_type *flags)
+{
+ int i;
+ unsigned char buf[4];
+
+ static struct {
+ int n;
+ unsigned char signature[sizeof(buf)];
+ ahc_chip type;
+ int bios_disabled;
+ } AIC7xxx[] = {
+ { 4, { 0x04, 0x90, 0x77, 0x70 },
+ AHC_AIC7770|AHC_EISA, FALSE }, /* mb 7770 */
+ { 4, { 0x04, 0x90, 0x77, 0x71 },
+ AHC_AIC7770|AHC_EISA, FALSE }, /* host adapter 274x */
+ { 4, { 0x04, 0x90, 0x77, 0x56 },
+ AHC_AIC7770|AHC_VL, FALSE }, /* 284x BIOS enabled */
+ { 4, { 0x04, 0x90, 0x77, 0x57 },
+ AHC_AIC7770|AHC_VL, TRUE } /* 284x BIOS disabled */
+ };
+
+ /*
+ * The VL-bus cards need to be primed by
+ * writing before a signature check.
+ */
+ for (i = 0; i < sizeof(buf); i++)
+ {
+ outb(0x80 + i, base);
+ buf[i] = inb(base + i);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(AIC7xxx); i++)
+ {
+ /*
+ * Signature match on enabled card?
+ */
+ if (!memcmp(buf, AIC7xxx[i].signature, AIC7xxx[i].n))
+ {
+ if (inb(base + 4) & 1)
+ {
+ if (AIC7xxx[i].bios_disabled)
+ {
+ *flags |= AHC_USEDEFAULTS;
+ }
+ else
+ {
+ *flags |= AHC_BIOS_ENABLED;
+ }
+ return (i);
+ }
+
+ printk("aic7xxx: <Adaptec 7770 SCSI Host Adapter> "
+ "disabled at slot %d, ignored.\n", slot);
+ }
+ }
+
+ return (-1);
+}
+#endif /* (__i386__) || (__alpha__) */
+
+
+/*+F*************************************************************************
+ * Function:
+ * read_2840_seeprom
+ *
+ * Description:
+ * Reads the 2840 serial EEPROM and returns 1 if successful and 0 if
+ * not successful.
+ *
+ * See read_seeprom (for the 2940) for the instruction set of the 93C46
+ * chip.
+ *
+ * The 2840 interface to the 93C46 serial EEPROM is through the
+ * STATUS_2840 and SEECTL_2840 registers. The CS_2840, CK_2840, and
+ * DO_2840 bits of the SEECTL_2840 register are connected to the chip
+ * select, clock, and data out lines respectively of the serial EEPROM.
+ * The DI_2840 bit of the STATUS_2840 is connected to the data in line
+ * of the serial EEPROM. The EEPROM_TF bit of STATUS_2840 register is
+ * useful in that it gives us an 800 nsec timer. After a read from the
+ * SEECTL_2840 register the timing flag is cleared and goes high 800 nsec
+ * later.
+ *-F*************************************************************************/
+static int
+read_284x_seeprom(struct aic7xxx_host *p, struct seeprom_config *sc)
+{
+ int i = 0, k = 0;
+ unsigned char temp;
+ unsigned short checksum = 0;
+ unsigned short *seeprom = (unsigned short *) sc;
+ struct seeprom_cmd {
+ unsigned char len;
+ unsigned char bits[3];
+ };
+ struct seeprom_cmd seeprom_read = {3, {1, 1, 0}};
+
+#define CLOCK_PULSE(p) \
+ while ((aic_inb(p, STATUS_2840) & EEPROM_TF) == 0) \
+ { \
+ ; /* Do nothing */ \
+ } \
+ (void) aic_inb(p, SEECTL_2840);
+
+ /*
+ * Read the first 32 registers of the seeprom. For the 2840,
+ * the 93C46 SEEPROM is a 1024-bit device with 64 16-bit registers
+ * but only the first 32 are used by Adaptec BIOS. The loop
+ * will range from 0 to 31.
+ */
+ for (k = 0; k < (sizeof(*sc) / 2); k++)
+ {
+ /*
+ * Send chip select for one clock cycle.
+ */
+ aic_outb(p, CK_2840 | CS_2840, SEECTL_2840);
+ CLOCK_PULSE(p);
+
+ /*
+ * Now we're ready to send the read command followed by the
+ * address of the 16-bit register we want to read.
+ */
+ for (i = 0; i < seeprom_read.len; i++)
+ {
+ temp = CS_2840 | seeprom_read.bits[i];
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ temp = temp ^ CK_2840;
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ }
+ /*
+ * Send the 6 bit address (MSB first, LSB last).
+ */
+ for (i = 5; i >= 0; i--)
+ {
+ temp = k;
+ temp = (temp >> i) & 1; /* Mask out all but lower bit. */
+ temp = CS_2840 | temp;
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ temp = temp ^ CK_2840;
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ }
+
+ /*
+ * Now read the 16 bit register. An initial 0 precedes the
+ * register contents which begins with bit 15 (MSB) and ends
+ * with bit 0 (LSB). The initial 0 will be shifted off the
+ * top of our word as we let the loop run from 0 to 16.
+ */
+ for (i = 0; i <= 16; i++)
+ {
+ temp = CS_2840;
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ temp = temp ^ CK_2840;
+ seeprom[k] = (seeprom[k] << 1) | (aic_inb(p, STATUS_2840) & DI_2840);
+ aic_outb(p, temp, SEECTL_2840);
+ CLOCK_PULSE(p);
+ }
+ /*
+ * The serial EEPROM has a checksum in the last word. Keep a
+ * running checksum for all words read except for the last
+ * word. We'll verify the checksum after all words have been
+ * read.
+ */
+ if (k < (sizeof(*sc) / 2) - 1)
+ {
+ checksum = checksum + seeprom[k];
+ }
+
+ /*
+ * Reset the chip select for the next command cycle.
+ */
+ aic_outb(p, 0, SEECTL_2840);
+ CLOCK_PULSE(p);
+ aic_outb(p, CK_2840, SEECTL_2840);
+ CLOCK_PULSE(p);
+ aic_outb(p, 0, SEECTL_2840);
+ CLOCK_PULSE(p);
+ }
+
+#if 0
+ printk("Computed checksum 0x%x, checksum read 0x%x\n", checksum, sc->checksum);
+ printk("Serial EEPROM:");
+ for (k = 0; k < (sizeof(*sc) / 2); k++)
+ {
+ if (((k % 8) == 0) && (k != 0))
+ {
+ printk("\n ");
+ }
+ printk(" 0x%x", seeprom[k]);
+ }
+ printk("\n");
+#endif
+
+ if (checksum != sc->checksum)
+ {
+ printk("aic7xxx: SEEPROM checksum error, ignoring SEEPROM settings.\n");
+ return (0);
+ }
+
+ return (1);
+#undef CLOCK_PULSE
+}
+
+#define CLOCK_PULSE(p) \
+ do { \
+ int limit = 0; \
+ do { \
+ mb(); \
+ pause_sequencer(p); /* This is just to generate some PCI */ \
+ /* traffic so the PCI read is flushed */ \
+ /* it shouldn't be needed, but some */ \
+ /* chipsets do indeed appear to need */ \
+ /* something to force PCI reads to get */ \
+ /* flushed */ \
+ udelay(1); /* Do nothing */ \
+ } while (((aic_inb(p, SEECTL) & SEERDY) == 0) && (++limit < 1000)); \
+ } while(0)
+
+/*+F*************************************************************************
+ * Function:
+ * acquire_seeprom
+ *
+ * Description:
+ * Acquires access to the memory port on PCI controllers.
+ *-F*************************************************************************/
+static int
+acquire_seeprom(struct aic7xxx_host *p)
+{
+
+ /*
+ * Request access of the memory port. When access is
+ * granted, SEERDY will go high. We use a 1 second
+ * timeout which should be near 1 second more than
+ * is needed. Reason: after the 7870 chip reset, there
+ * should be no contention.
+ */
+ aic_outb(p, SEEMS, SEECTL);
+ CLOCK_PULSE(p);
+ if ((aic_inb(p, SEECTL) & SEERDY) == 0)
+ {
+ aic_outb(p, 0, SEECTL);
+ return (0);
+ }
+ return (1);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * release_seeprom
+ *
+ * Description:
+ * Releases access to the memory port on PCI controllers.
+ *-F*************************************************************************/
+static void
+release_seeprom(struct aic7xxx_host *p)
+{
+ /*
+ * Make sure the SEEPROM is ready before we release it.
+ */
+ CLOCK_PULSE(p);
+ aic_outb(p, 0, SEECTL);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * read_seeprom
+ *
+ * Description:
+ * Reads the serial EEPROM and returns 1 if successful and 0 if
+ * not successful.
+ *
+ * The instruction set of the 93C46/56/66 chips is as follows:
+ *
+ * Start OP
+ * Function Bit Code Address Data Description
+ * -------------------------------------------------------------------
+ * READ 1 10 A5 - A0 Reads data stored in memory,
+ * starting at specified address
+ * EWEN 1 00 11XXXX Write enable must precede
+ * all programming modes
+ * ERASE 1 11 A5 - A0 Erase register A5A4A3A2A1A0
+ * WRITE 1 01 A5 - A0 D15 - D0 Writes register
+ * ERAL 1 00 10XXXX Erase all registers
+ * WRAL 1 00 01XXXX D15 - D0 Writes to all registers
+ * EWDS 1 00 00XXXX Disables all programming
+ * instructions
+ * *Note: A value of X for address is a don't care condition.
+ * *Note: The 93C56 and 93C66 have 8 address bits.
+ *
+ *
+ * The 93C46 has a four wire interface: clock, chip select, data in, and
+ * data out. In order to perform one of the above functions, you need
+ * to enable the chip select for a clock period (typically a minimum of
+ * 1 usec, with the clock high and low a minimum of 750 and 250 nsec
+ * respectively. While the chip select remains high, you can clock in
+ * the instructions (above) starting with the start bit, followed by the
+ * OP code, Address, and Data (if needed). For the READ instruction, the
+ * requested 16-bit register contents is read from the data out line but
+ * is preceded by an initial zero (leading 0, followed by 16-bits, MSB
+ * first). The clock cycling from low to high initiates the next data
+ * bit to be sent from the chip.
+ *
+ * The 78xx interface to the 93C46 serial EEPROM is through the SEECTL
+ * register. After successful arbitration for the memory port, the
+ * SEECS bit of the SEECTL register is connected to the chip select.
+ * The SEECK, SEEDO, and SEEDI are connected to the clock, data out,
+ * and data in lines respectively. The SEERDY bit of SEECTL is useful
+ * in that it gives us an 800 nsec timer. After a write to the SEECTL
+ * register, the SEERDY goes high 800 nsec later. The one exception
+ * to this is when we first request access to the memory port. The
+ * SEERDY goes high to signify that access has been granted and, for
+ * this case, has no implied timing.
+ *-F*************************************************************************/
+static int
+read_seeprom(struct aic7xxx_host *p, int offset,
+ unsigned short *scarray, unsigned int len, seeprom_chip_type chip)
+{
+ int i = 0, k;
+ unsigned char temp;
+ unsigned short checksum = 0;
+ struct seeprom_cmd {
+ unsigned char len;
+ unsigned char bits[3];
+ };
+ struct seeprom_cmd seeprom_read = {3, {1, 1, 0}};
+
+ /*
+ * Request access of the memory port.
+ */
+ if (acquire_seeprom(p) == 0)
+ {
+ return (0);
+ }
+
+ /*
+ * Read 'len' registers of the seeprom. For the 7870, the 93C46
+ * SEEPROM is a 1024-bit device with 64 16-bit registers but only
+ * the first 32 are used by Adaptec BIOS. Some adapters use the
+ * 93C56 SEEPROM which is a 2048-bit device. The loop will range
+ * from 0 to 'len' - 1.
+ */
+ for (k = 0; k < len; k++)
+ {
+ /*
+ * Send chip select for one clock cycle.
+ */
+ aic_outb(p, SEEMS | SEECK | SEECS, SEECTL);
+ CLOCK_PULSE(p);
+
+ /*
+ * Now we're ready to send the read command followed by the
+ * address of the 16-bit register we want to read.
+ */
+ for (i = 0; i < seeprom_read.len; i++)
+ {
+ temp = SEEMS | SEECS | (seeprom_read.bits[i] << 1);
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ temp = temp ^ SEECK;
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ }
+ /*
+ * Send the 6 or 8 bit address (MSB first, LSB last).
+ */
+ for (i = ((int) chip - 1); i >= 0; i--)
+ {
+ temp = k + offset;
+ temp = (temp >> i) & 1; /* Mask out all but lower bit. */
+ temp = SEEMS | SEECS | (temp << 1);
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ temp = temp ^ SEECK;
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ }
+
+ /*
+ * Now read the 16 bit register. An initial 0 precedes the
+ * register contents which begins with bit 15 (MSB) and ends
+ * with bit 0 (LSB). The initial 0 will be shifted off the
+ * top of our word as we let the loop run from 0 to 16.
+ */
+ for (i = 0; i <= 16; i++)
+ {
+ temp = SEEMS | SEECS;
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ temp = temp ^ SEECK;
+ scarray[k] = (scarray[k] << 1) | (aic_inb(p, SEECTL) & SEEDI);
+ aic_outb(p, temp, SEECTL);
+ CLOCK_PULSE(p);
+ }
+
+ /*
+ * The serial EEPROM should have a checksum in the last word.
+ * Keep a running checksum for all words read except for the
+ * last word. We'll verify the checksum after all words have
+ * been read.
+ */
+ if (k < (len - 1))
+ {
+ checksum = checksum + scarray[k];
+ }
+
+ /*
+ * Reset the chip select for the next command cycle.
+ */
+ aic_outb(p, SEEMS, SEECTL);
+ CLOCK_PULSE(p);
+ aic_outb(p, SEEMS | SEECK, SEECTL);
+ CLOCK_PULSE(p);
+ aic_outb(p, SEEMS, SEECTL);
+ CLOCK_PULSE(p);
+ }
+
+ /*
+ * Release access to the memory port and the serial EEPROM.
+ */
+ release_seeprom(p);
+
+#if 0
+ printk("Computed checksum 0x%x, checksum read 0x%x\n",
+ checksum, scarray[len - 1]);
+ printk("Serial EEPROM:");
+ for (k = 0; k < len; k++)
+ {
+ if (((k % 8) == 0) && (k != 0))
+ {
+ printk("\n ");
+ }
+ printk(" 0x%x", scarray[k]);
+ }
+ printk("\n");
+#endif
+ if ( (checksum != scarray[len - 1]) || (checksum == 0) )
+ {
+ return (0);
+ }
+
+ return (1);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * read_brdctl
+ *
+ * Description:
+ * Reads the BRDCTL register.
+ *-F*************************************************************************/
+static unsigned char
+read_brdctl(struct aic7xxx_host *p)
+{
+ unsigned char brdctl, value;
+
+ /*
+ * Make sure the SEEPROM is ready before we access it
+ */
+ CLOCK_PULSE(p);
+ if (p->features & AHC_ULTRA2)
+ {
+ brdctl = BRDRW_ULTRA2;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ value = aic_inb(p, BRDCTL);
+ CLOCK_PULSE(p);
+ return(value);
+ }
+ brdctl = BRDRW;
+ if ( !((p->chip & AHC_CHIPID_MASK) == AHC_AIC7895) ||
+ (p->flags & AHC_CHNLB) )
+ {
+ brdctl |= BRDCS;
+ }
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ value = aic_inb(p, BRDCTL);
+ CLOCK_PULSE(p);
+ aic_outb(p, 0, BRDCTL);
+ CLOCK_PULSE(p);
+ return (value);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * write_brdctl
+ *
+ * Description:
+ * Writes a value to the BRDCTL register.
+ *-F*************************************************************************/
+static void
+write_brdctl(struct aic7xxx_host *p, unsigned char value)
+{
+ unsigned char brdctl;
+
+ /*
+ * Make sure the SEEPROM is ready before we access it
+ */
+ CLOCK_PULSE(p);
+ if (p->features & AHC_ULTRA2)
+ {
+ brdctl = value;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl |= BRDSTB_ULTRA2;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl &= ~BRDSTB_ULTRA2;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ read_brdctl(p);
+ CLOCK_PULSE(p);
+ }
+ else
+ {
+ brdctl = BRDSTB;
+ if ( !((p->chip & AHC_CHIPID_MASK) == AHC_AIC7895) ||
+ (p->flags & AHC_CHNLB) )
+ {
+ brdctl |= BRDCS;
+ }
+ brdctl = BRDSTB | BRDCS;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl |= value;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl &= ~BRDSTB;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl &= ~BRDCS;
+ aic_outb(p, brdctl, BRDCTL);
+ CLOCK_PULSE(p);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic785x_cable_detect
+ *
+ * Description:
+ * Detect the cables that are present on aic785x class controller chips
+ *-F*************************************************************************/
+static void
+aic785x_cable_detect(struct aic7xxx_host *p, int *int_50,
+ int *ext_present, int *eeprom)
+{
+ unsigned char brdctl;
+
+ aic_outb(p, BRDRW | BRDCS, BRDCTL);
+ CLOCK_PULSE(p);
+ aic_outb(p, 0, BRDCTL);
+ CLOCK_PULSE(p);
+ brdctl = aic_inb(p, BRDCTL);
+ CLOCK_PULSE(p);
+ *int_50 = !(brdctl & BRDDAT5);
+ *ext_present = !(brdctl & BRDDAT6);
+ *eeprom = (aic_inb(p, SPIOCAP) & EEPROM);
+}
+
+#undef CLOCK_PULSE
+
+/*+F*************************************************************************
+ * Function:
+ * aic2940_uwpro_cable_detect
+ *
+ * Description:
+ * Detect the cables that are present on the 2940-UWPro cards
+ *
+ * NOTE: This function assumes the SEEPROM will have already been acquired
+ * prior to invocation of this function.
+ *-F*************************************************************************/
+static void
+aic2940_uwpro_wide_cable_detect(struct aic7xxx_host *p, int *int_68,
+ int *ext_68, int *eeprom)
+{
+ unsigned char brdctl;
+
+ /*
+ * First read the status of our cables. Set the rom bank to
+ * 0 since the bank setting serves as a multiplexor for the
+ * cable detection logic. BRDDAT5 controls the bank switch.
+ */
+ write_brdctl(p, 0);
+
+ /*
+ * Now we read the state of the internal 68 connector. BRDDAT6
+ * is don't care, BRDDAT7 is internal 68. The cable is
+ * present if the bit is 0
+ */
+ brdctl = read_brdctl(p);
+ *int_68 = !(brdctl & BRDDAT7);
+
+ /*
+ * Set the bank bit in brdctl and then read the external cable state
+ * and the EEPROM status
+ */
+ write_brdctl(p, BRDDAT5);
+ brdctl = read_brdctl(p);
+
+ *ext_68 = !(brdctl & BRDDAT6);
+ *eeprom = !(brdctl & BRDDAT7);
+
+ /*
+ * We're done, the calling function will release the SEEPROM for us
+ */
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic787x_cable_detect
+ *
+ * Description:
+ * Detect the cables that are present on aic787x class controller chips
+ *
+ * NOTE: This function assumes the SEEPROM will have already been acquired
+ * prior to invocation of this function.
+ *-F*************************************************************************/
+static void
+aic787x_cable_detect(struct aic7xxx_host *p, int *int_50, int *int_68,
+ int *ext_present, int *eeprom)
+{
+ unsigned char brdctl;
+
+ /*
+ * First read the status of our cables. Set the rom bank to
+ * 0 since the bank setting serves as a multiplexor for the
+ * cable detection logic. BRDDAT5 controls the bank switch.
+ */
+ write_brdctl(p, 0);
+
+ /*
+ * Now we read the state of the two internal connectors. BRDDAT6
+ * is internal 50, BRDDAT7 is internal 68. For each, the cable is
+ * present if the bit is 0
+ */
+ brdctl = read_brdctl(p);
+ *int_50 = !(brdctl & BRDDAT6);
+ *int_68 = !(brdctl & BRDDAT7);
+
+ /*
+ * Set the bank bit in brdctl and then read the external cable state
+ * and the EEPROM status
+ */
+ write_brdctl(p, BRDDAT5);
+ brdctl = read_brdctl(p);
+
+ *ext_present = !(brdctl & BRDDAT6);
+ *eeprom = !(brdctl & BRDDAT7);
+
+ /*
+ * We're done, the calling function will release the SEEPROM for us
+ */
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic787x_ultra2_term_detect
+ *
+ * Description:
+ * Detect the termination settings present on ultra2 class controllers
+ *
+ * NOTE: This function assumes the SEEPROM will have already been acquired
+ * prior to invocation of this function.
+ *-F*************************************************************************/
+static void
+aic7xxx_ultra2_term_detect(struct aic7xxx_host *p, int *enableSE_low,
+ int *enableSE_high, int *enableLVD_low,
+ int *enableLVD_high, int *eprom_present)
+{
+ unsigned char brdctl;
+
+ brdctl = read_brdctl(p);
+
+ *eprom_present = (brdctl & BRDDAT7);
+ *enableSE_high = (brdctl & BRDDAT6);
+ *enableSE_low = (brdctl & BRDDAT5);
+ *enableLVD_high = (brdctl & BRDDAT4);
+ *enableLVD_low = (brdctl & BRDDAT3);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * configure_termination
+ *
+ * Description:
+ * Configures the termination settings on PCI adapters that have
+ * SEEPROMs available.
+ *-F*************************************************************************/
+static void
+configure_termination(struct aic7xxx_host *p)
+{
+ int internal50_present = 0;
+ int internal68_present = 0;
+ int external_present = 0;
+ int eprom_present = 0;
+ int enableSE_low = 0;
+ int enableSE_high = 0;
+ int enableLVD_low = 0;
+ int enableLVD_high = 0;
+ unsigned char brddat = 0;
+ unsigned char max_target = 0;
+ unsigned char sxfrctl1 = aic_inb(p, SXFRCTL1);
+
+ if (acquire_seeprom(p))
+ {
+ if (p->features & (AHC_WIDE|AHC_TWIN))
+ max_target = 16;
+ else
+ max_target = 8;
+ aic_outb(p, SEEMS | SEECS, SEECTL);
+ sxfrctl1 &= ~STPWEN;
+ /*
+ * The termination/cable detection logic is split into three distinct
+ * groups. Ultra2 and later controllers, 2940UW-Pro controllers, and
+ * older 7850, 7860, 7870, 7880, and 7895 controllers. Each has its
+ * own unique way of detecting their cables and writing the results
+ * back to the card.
+ */
+ if (p->features & AHC_ULTRA2)
+ {
+ /*
+ * As long as user hasn't overridden term settings, always check the
+ * cable detection logic
+ */
+ if (aic7xxx_override_term == -1)
+ {
+ aic7xxx_ultra2_term_detect(p, &enableSE_low, &enableSE_high,
+ &enableLVD_low, &enableLVD_high,
+ &eprom_present);
+ }
+
+ /*
+ * If the user is overriding settings, then they have been preserved
+ * to here as fake adapter_control entries. Parse them and allow
+ * them to override the detected settings (if we even did detection).
+ */
+ if (!(p->adapter_control & CFSEAUTOTERM))
+ {
+ enableSE_low = (p->adapter_control & CFSTERM);
+ enableSE_high = (p->adapter_control & CFWSTERM);
+ }
+ if (!(p->adapter_control & CFAUTOTERM))
+ {
+ enableLVD_low = enableLVD_high = (p->adapter_control & CFLVDSTERM);
+ }
+
+ /*
+ * Now take those settings that we have and translate them into the
+ * values that must be written into the registers.
+ *
+ * Flash Enable = BRDDAT7
+ * Secondary High Term Enable = BRDDAT6
+ * Secondary Low Term Enable = BRDDAT5
+ * LVD/Primary High Term Enable = BRDDAT4
+ * LVD/Primary Low Term Enable = STPWEN bit in SXFRCTL1
+ */
+ if (enableLVD_low != 0)
+ {
+ sxfrctl1 |= STPWEN;
+ p->flags |= AHC_TERM_ENB_LVD;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) LVD/Primary Low byte termination "
+ "Enabled\n", p->host_no);
+ }
+
+ if (enableLVD_high != 0)
+ {
+ brddat |= BRDDAT4;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) LVD/Primary High byte termination "
+ "Enabled\n", p->host_no);
+ }
+
+ if (enableSE_low != 0)
+ {
+ brddat |= BRDDAT5;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Secondary Low byte termination "
+ "Enabled\n", p->host_no);
+ }
+
+ if (enableSE_high != 0)
+ {
+ brddat |= BRDDAT6;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Secondary High byte termination "
+ "Enabled\n", p->host_no);
+ }
+ }
+ else if (p->features & AHC_NEW_AUTOTERM)
+ {
+ /*
+ * The 50 pin connector termination is controlled by STPWEN in the
+ * SXFRCTL1 register. Since the Adaptec docs typically say the
+ * controller is not allowed to be in the middle of a cable and
+ * this is the only connection on that stub of the bus, there is
+ * no need to even check for narrow termination, it's simply
+ * always on.
+ */
+ sxfrctl1 |= STPWEN;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Narrow channel termination Enabled\n",
+ p->host_no);
+
+ if (p->adapter_control & CFAUTOTERM)
+ {
+ aic2940_uwpro_wide_cable_detect(p, &internal68_present,
+ &external_present,
+ &eprom_present);
+ printk(KERN_INFO "(scsi%d) Cables present (Int-50 %s, Int-68 %s, "
+ "Ext-68 %s)\n", p->host_no,
+ "Don't Care",
+ internal68_present ? "YES" : "NO",
+ external_present ? "YES" : "NO");
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) EEPROM %s present.\n", p->host_no,
+ eprom_present ? "is" : "is not");
+ if (internal68_present && external_present)
+ {
+ brddat = 0;
+ p->flags &= ~AHC_TERM_ENB_SE_HIGH;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Wide channel termination Disabled\n",
+ p->host_no);
+ }
+ else
+ {
+ brddat = BRDDAT6;
+ p->flags |= AHC_TERM_ENB_SE_HIGH;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Wide channel termination Enabled\n",
+ p->host_no);
+ }
+ }
+ else
+ {
+ /*
+ * The termination of the Wide channel is done more like normal
+ * though, and the setting of this termination is done by writing
+ * either a 0 or 1 to BRDDAT6 of the BRDDAT register
+ */
+ if (p->adapter_control & CFWSTERM)
+ {
+ brddat = BRDDAT6;
+ p->flags |= AHC_TERM_ENB_SE_HIGH;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Wide channel termination Enabled\n",
+ p->host_no);
+ }
+ else
+ {
+ brddat = 0;
+ }
+ }
+ }
+ else
+ {
+ if (p->adapter_control & CFAUTOTERM)
+ {
+ if (p->flags & AHC_MOTHERBOARD)
+ {
+ printk(KERN_INFO "(scsi%d) Warning - detected auto-termination\n",
+ p->host_no);
+ printk(KERN_INFO "(scsi%d) Please verify driver detected settings "
+ "are correct.\n", p->host_no);
+ printk(KERN_INFO "(scsi%d) If not, then please properly set the "
+ "device termination\n", p->host_no);
+ printk(KERN_INFO "(scsi%d) in the Adaptec SCSI BIOS by hitting "
+ "CTRL-A when prompted\n", p->host_no);
+ printk(KERN_INFO "(scsi%d) during machine bootup.\n", p->host_no);
+ }
+ /* Configure auto termination. */
+
+ if ( (p->chip & AHC_CHIPID_MASK) >= AHC_AIC7870 )
+ {
+ aic787x_cable_detect(p, &internal50_present, &internal68_present,
+ &external_present, &eprom_present);
+ }
+ else
+ {
+ aic785x_cable_detect(p, &internal50_present, &external_present,
+ &eprom_present);
+ }
+
+ if (max_target <= 8)
+ internal68_present = 0;
+
+ if (max_target > 8)
+ {
+ printk(KERN_INFO "(scsi%d) Cables present (Int-50 %s, Int-68 %s, "
+ "Ext-68 %s)\n", p->host_no,
+ internal50_present ? "YES" : "NO",
+ internal68_present ? "YES" : "NO",
+ external_present ? "YES" : "NO");
+ }
+ else
+ {
+ printk(KERN_INFO "(scsi%d) Cables present (Int-50 %s, Ext-50 %s)\n",
+ p->host_no,
+ internal50_present ? "YES" : "NO",
+ external_present ? "YES" : "NO");
+ }
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) EEPROM %s present.\n", p->host_no,
+ eprom_present ? "is" : "is not");
+
+ /*
+ * Now set the termination based on what we found. BRDDAT6
+ * controls wide termination enable.
+ * Flash Enable = BRDDAT7
+ * SE High Term Enable = BRDDAT6
+ */
+ if (internal50_present && internal68_present && external_present)
+ {
+ printk(KERN_INFO "(scsi%d) Illegal cable configuration!! Only two\n",
+ p->host_no);
+ printk(KERN_INFO "(scsi%d) connectors on the SCSI controller may be "
+ "in use at a time!\n", p->host_no);
+ /*
+ * Force termination (low and high byte) on. This is safer than
+ * leaving it completely off, especially since this message comes
+ * most often from motherboard controllers that don't even have 3
+ * connectors, but instead are failing the cable detection.
+ */
+ internal50_present = external_present = 0;
+ enableSE_high = enableSE_low = 1;
+ }
+
+ if ((max_target > 8) &&
+ ((external_present == 0) || (internal68_present == 0)) )
+ {
+ brddat |= BRDDAT6;
+ p->flags |= AHC_TERM_ENB_SE_HIGH;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) SE High byte termination Enabled\n",
+ p->host_no);
+ }
+
+ if ( ((internal50_present ? 1 : 0) +
+ (internal68_present ? 1 : 0) +
+ (external_present ? 1 : 0)) <= 1 )
+ {
+ sxfrctl1 |= STPWEN;
+ p->flags |= AHC_TERM_ENB_SE_LOW;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) SE Low byte termination Enabled\n",
+ p->host_no);
+ }
+ }
+ else /* p->adapter_control & CFAUTOTERM */
+ {
+ if (p->adapter_control & CFSTERM)
+ {
+ sxfrctl1 |= STPWEN;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) SE Low byte termination Enabled\n",
+ p->host_no);
+ }
+
+ if (p->adapter_control & CFWSTERM)
+ {
+ brddat |= BRDDAT6;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) SE High byte termination Enabled\n",
+ p->host_no);
+ }
+ }
+ }
+
+ aic_outb(p, sxfrctl1, SXFRCTL1);
+ write_brdctl(p, brddat);
+ release_seeprom(p);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * detect_maxscb
+ *
+ * Description:
+ * Detects the maximum number of SCBs for the controller and returns
+ * the count and a mask in p (p->maxscbs, p->qcntmask).
+ *-F*************************************************************************/
+static void
+detect_maxscb(struct aic7xxx_host *p)
+{
+ int i;
+
+ /*
+ * It's possible that we've already done this for multichannel
+ * adapters.
+ */
+ if (p->scb_data->maxhscbs == 0)
+ {
+ /*
+ * We haven't initialized the SCB settings yet. Walk the SCBs to
+ * determince how many there are.
+ */
+ aic_outb(p, 0, FREE_SCBH);
+
+ for (i = 0; i < AIC7XXX_MAXSCB; i++)
+ {
+ aic_outb(p, i, SCBPTR);
+ aic_outb(p, i, SCB_CONTROL);
+ if (aic_inb(p, SCB_CONTROL) != i)
+ break;
+ aic_outb(p, 0, SCBPTR);
+ if (aic_inb(p, SCB_CONTROL) != 0)
+ break;
+
+ aic_outb(p, i, SCBPTR);
+ aic_outb(p, 0, SCB_CONTROL); /* Clear the control byte. */
+ aic_outb(p, i + 1, SCB_NEXT); /* Set the next pointer. */
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG); /* Make the tag invalid. */
+ aic_outb(p, SCB_LIST_NULL, SCB_BUSYTARGETS); /* no busy untagged */
+ aic_outb(p, SCB_LIST_NULL, SCB_BUSYTARGETS+1);/* targets active yet */
+ aic_outb(p, SCB_LIST_NULL, SCB_BUSYTARGETS+2);
+ aic_outb(p, SCB_LIST_NULL, SCB_BUSYTARGETS+3);
+ }
+
+ /* Make sure the last SCB terminates the free list. */
+ aic_outb(p, i - 1, SCBPTR);
+ aic_outb(p, SCB_LIST_NULL, SCB_NEXT);
+
+ /* Ensure we clear the first (0) SCBs control byte. */
+ aic_outb(p, 0, SCBPTR);
+ aic_outb(p, 0, SCB_CONTROL);
+
+ p->scb_data->maxhscbs = i;
+ /*
+ * Use direct indexing instead for speed
+ */
+ if ( i == AIC7XXX_MAXSCB )
+ p->flags &= ~AHC_PAGESCBS;
+ }
+
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_register
+ *
+ * Description:
+ * Register a Adaptec aic7xxx chip SCSI controller with the kernel.
+ *-F*************************************************************************/
+static int
+aic7xxx_register(Scsi_Host_Template *template, struct aic7xxx_host *p,
+ int reset_delay)
+{
+ int i, result;
+ int max_targets;
+ int found = 1;
+ unsigned char term, scsi_conf;
+ struct Scsi_Host *host;
+
+ host = p->host;
+
+ p->scb_data->maxscbs = AIC7XXX_MAXSCB;
+ host->can_queue = AIC7XXX_MAXSCB;
+ host->cmd_per_lun = 3;
+ host->sg_tablesize = AIC7XXX_MAX_SG;
+ host->this_id = p->scsi_id;
+ host->io_port = p->base;
+ host->n_io_port = 0xFF;
+ host->base = p->mbase;
+ host->irq = p->irq;
+ if (p->features & AHC_WIDE)
+ {
+ host->max_id = 16;
+ }
+ if (p->features & AHC_TWIN)
+ {
+ host->max_channel = 1;
+ }
+
+ p->host = host;
+ p->host_no = host->host_no;
+ host->unique_id = p->instance;
+ p->isr_count = 0;
+ p->next = NULL;
+ p->completeq.head = NULL;
+ p->completeq.tail = NULL;
+ scbq_init(&p->scb_data->free_scbs);
+ scbq_init(&p->waiting_scbs);
+ INIT_LIST_HEAD(&p->aic_devs);
+
+ /*
+ * We currently have no commands of any type
+ */
+ p->qinfifonext = 0;
+ p->qoutfifonext = 0;
+
+ printk(KERN_INFO "(scsi%d) <%s> found at ", p->host_no,
+ board_names[p->board_name_index]);
+ switch(p->chip)
+ {
+ case (AHC_AIC7770|AHC_EISA):
+ printk("EISA slot %d\n", p->pci_device_fn);
+ break;
+ case (AHC_AIC7770|AHC_VL):
+ printk("VLB slot %d\n", p->pci_device_fn);
+ break;
+ default:
+ printk("PCI %d/%d/%d\n", p->pci_bus, PCI_SLOT(p->pci_device_fn),
+ PCI_FUNC(p->pci_device_fn));
+ break;
+ }
+ if (p->features & AHC_TWIN)
+ {
+ printk(KERN_INFO "(scsi%d) Twin Channel, A SCSI ID %d, B SCSI ID %d, ",
+ p->host_no, p->scsi_id, p->scsi_id_b);
+ }
+ else
+ {
+ char *channel;
+
+ channel = "";
+
+ if ((p->flags & AHC_MULTI_CHANNEL) != 0)
+ {
+ channel = " A";
+
+ if ( (p->flags & (AHC_CHNLB|AHC_CHNLC)) != 0 )
+ {
+ channel = (p->flags & AHC_CHNLB) ? " B" : " C";
+ }
+ }
+ if (p->features & AHC_WIDE)
+ {
+ printk(KERN_INFO "(scsi%d) Wide ", p->host_no);
+ }
+ else
+ {
+ printk(KERN_INFO "(scsi%d) Narrow ", p->host_no);
+ }
+ printk("Channel%s, SCSI ID=%d, ", channel, p->scsi_id);
+ }
+ aic_outb(p, 0, SEQ_FLAGS);
+
+ detect_maxscb(p);
+
+ printk("%d/%d SCBs\n", p->scb_data->maxhscbs, p->scb_data->maxscbs);
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk(KERN_INFO "(scsi%d) BIOS %sabled, IO Port 0x%lx, IRQ %d\n",
+ p->host_no, (p->flags & AHC_BIOS_ENABLED) ? "en" : "dis",
+ p->base, p->irq);
+ printk(KERN_INFO "(scsi%d) IO Memory at 0x%lx, MMAP Memory at %p\n",
+ p->host_no, p->mbase, p->maddr);
+ }
+
+#ifdef CONFIG_PCI
+ /*
+ * Now that we know our instance number, we can set the flags we need to
+ * force termination if need be.
+ */
+ if (aic7xxx_stpwlev != -1)
+ {
+ /*
+ * This option only applies to PCI controllers.
+ */
+ if ( (p->chip & ~AHC_CHIPID_MASK) == AHC_PCI)
+ {
+ unsigned char devconfig;
+
+ pci_read_config_byte(p->pdev, DEVCONFIG, &devconfig);
+ if ( (aic7xxx_stpwlev >> p->instance) & 0x01 )
+ {
+ devconfig |= STPWLEVEL;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("(scsi%d) Force setting STPWLEVEL bit\n", p->host_no);
+ }
+ else
+ {
+ devconfig &= ~STPWLEVEL;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("(scsi%d) Force clearing STPWLEVEL bit\n", p->host_no);
+ }
+ pci_write_config_byte(p->pdev, DEVCONFIG, devconfig);
+ }
+ }
+#endif
+
+ /*
+ * That took care of devconfig and stpwlev, now for the actual termination
+ * settings.
+ */
+ if (aic7xxx_override_term != -1)
+ {
+ /*
+ * Again, this only applies to PCI controllers. We don't have problems
+ * with the termination on 274x controllers to the best of my knowledge.
+ */
+ if ( (p->chip & ~AHC_CHIPID_MASK) == AHC_PCI)
+ {
+ unsigned char term_override;
+
+ term_override = ( (aic7xxx_override_term >> (p->instance * 4)) & 0x0f);
+ p->adapter_control &=
+ ~(CFSTERM|CFWSTERM|CFLVDSTERM|CFAUTOTERM|CFSEAUTOTERM);
+ if ( (p->features & AHC_ULTRA2) && (term_override & 0x0c) )
+ {
+ p->adapter_control |= CFLVDSTERM;
+ }
+ if (term_override & 0x02)
+ {
+ p->adapter_control |= CFWSTERM;
+ }
+ if (term_override & 0x01)
+ {
+ p->adapter_control |= CFSTERM;
+ }
+ }
+ }
+
+ if ( (p->flags & AHC_SEEPROM_FOUND) || (aic7xxx_override_term != -1) )
+ {
+ if (p->features & AHC_SPIOCAP)
+ {
+ if ( aic_inb(p, SPIOCAP) & SSPIOCPS )
+ /*
+ * Update the settings in sxfrctl1 to match the termination
+ * settings.
+ */
+ configure_termination(p);
+ }
+ else if ((p->chip & AHC_CHIPID_MASK) >= AHC_AIC7870)
+ {
+ configure_termination(p);
+ }
+ }
+
+ /*
+ * Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels
+ */
+ if (p->features & AHC_TWIN)
+ {
+ /* Select channel B */
+ aic_outb(p, aic_inb(p, SBLKCTL) | SELBUSB, SBLKCTL);
+
+ if ((p->flags & AHC_SEEPROM_FOUND) || (aic7xxx_override_term != -1))
+ term = (aic_inb(p, SXFRCTL1) & STPWEN);
+ else
+ term = ((p->flags & AHC_TERM_ENB_B) ? STPWEN : 0);
+
+ aic_outb(p, p->scsi_id_b, SCSIID);
+ scsi_conf = aic_inb(p, SCSICONF + 1);
+ aic_outb(p, DFON | SPIOEN, SXFRCTL0);
+ aic_outb(p, (scsi_conf & ENSPCHK) | aic7xxx_seltime | term |
+ ENSTIMER | ACTNEGEN, SXFRCTL1);
+ aic_outb(p, 0, SIMODE0);
+ aic_outb(p, ENSELTIMO | ENSCSIRST | ENSCSIPERR, SIMODE1);
+ aic_outb(p, 0, SCSIRATE);
+
+ /* Select channel A */
+ aic_outb(p, aic_inb(p, SBLKCTL) & ~SELBUSB, SBLKCTL);
+ }
+
+ if (p->features & AHC_ULTRA2)
+ {
+ aic_outb(p, p->scsi_id, SCSIID_ULTRA2);
+ }
+ else
+ {
+ aic_outb(p, p->scsi_id, SCSIID);
+ }
+ if ((p->flags & AHC_SEEPROM_FOUND) || (aic7xxx_override_term != -1))
+ term = (aic_inb(p, SXFRCTL1) & STPWEN);
+ else
+ term = ((p->flags & (AHC_TERM_ENB_A|AHC_TERM_ENB_LVD)) ? STPWEN : 0);
+ scsi_conf = aic_inb(p, SCSICONF);
+ aic_outb(p, DFON | SPIOEN, SXFRCTL0);
+ aic_outb(p, (scsi_conf & ENSPCHK) | aic7xxx_seltime | term |
+ ENSTIMER | ACTNEGEN, SXFRCTL1);
+ aic_outb(p, 0, SIMODE0);
+ /*
+ * If we are a cardbus adapter then don't enable SCSI reset detection.
+ * We shouldn't likely be sharing SCSI busses with someone else, and
+ * if we don't have a cable currently plugged into the controller then
+ * we won't have a power source for the SCSI termination, which means
+ * we'll see infinite incoming bus resets.
+ */
+ if(p->flags & AHC_NO_STPWEN)
+ aic_outb(p, ENSELTIMO | ENSCSIPERR, SIMODE1);
+ else
+ aic_outb(p, ENSELTIMO | ENSCSIRST | ENSCSIPERR, SIMODE1);
+ aic_outb(p, 0, SCSIRATE);
+ if ( p->features & AHC_ULTRA2)
+ aic_outb(p, 0, SCSIOFFSET);
+
+ /*
+ * Look at the information that board initialization or the board
+ * BIOS has left us. In the lower four bits of each target's
+ * scratch space any value other than 0 indicates that we should
+ * initiate synchronous transfers. If it's zero, the user or the
+ * BIOS has decided to disable synchronous negotiation to that
+ * target so we don't activate the needsdtr flag.
+ */
+ if ((p->features & (AHC_TWIN|AHC_WIDE)) == 0)
+ {
+ max_targets = 8;
+ }
+ else
+ {
+ max_targets = 16;
+ }
+
+ if (!(aic7xxx_no_reset))
+ {
+ /*
+ * If we reset the bus, then clear the transfer settings, else leave
+ * them be.
+ */
+ aic_outb(p, 0, ULTRA_ENB);
+ aic_outb(p, 0, ULTRA_ENB + 1);
+ p->ultraenb = 0;
+ }
+
+ /*
+ * Allocate enough hardware scbs to handle the maximum number of
+ * concurrent transactions we can have. We have to make sure that
+ * the allocated memory is contiguous memory. The Linux kmalloc
+ * routine should only allocate contiguous memory, but note that
+ * this could be a problem if kmalloc() is changed.
+ */
+ {
+ size_t array_size;
+ unsigned int hscb_physaddr;
+
+ array_size = p->scb_data->maxscbs * sizeof(struct aic7xxx_hwscb);
+ if (p->scb_data->hscbs == NULL)
+ {
+ /* pci_alloc_consistent enforces the alignment already and
+ * clears the area as well.
+ */
+ p->scb_data->hscbs = pci_alloc_consistent(p->pdev, array_size,
+ &p->scb_data->hscbs_dma);
+ /* We have to use pci_free_consistent, not kfree */
+ p->scb_data->hscb_kmalloc_ptr = NULL;
+ p->scb_data->hscbs_dma_len = array_size;
+ }
+ if (p->scb_data->hscbs == NULL)
+ {
+ printk("(scsi%d) Unable to allocate hardware SCB array; "
+ "failing detection.\n", p->host_no);
+ aic_outb(p, 0, SIMODE1);
+ p->irq = 0;
+ return(0);
+ }
+
+ hscb_physaddr = p->scb_data->hscbs_dma;
+ aic_outb(p, hscb_physaddr & 0xFF, HSCB_ADDR);
+ aic_outb(p, (hscb_physaddr >> 8) & 0xFF, HSCB_ADDR + 1);
+ aic_outb(p, (hscb_physaddr >> 16) & 0xFF, HSCB_ADDR + 2);
+ aic_outb(p, (hscb_physaddr >> 24) & 0xFF, HSCB_ADDR + 3);
+
+ /* Set up the fifo areas at the same time */
+ p->untagged_scbs = pci_alloc_consistent(p->pdev, 3*256, &p->fifo_dma);
+ if (p->untagged_scbs == NULL)
+ {
+ printk("(scsi%d) Unable to allocate hardware FIFO arrays; "
+ "failing detection.\n", p->host_no);
+ p->irq = 0;
+ return(0);
+ }
+
+ p->qoutfifo = p->untagged_scbs + 256;
+ p->qinfifo = p->qoutfifo + 256;
+ for (i = 0; i < 256; i++)
+ {
+ p->untagged_scbs[i] = SCB_LIST_NULL;
+ p->qinfifo[i] = SCB_LIST_NULL;
+ p->qoutfifo[i] = SCB_LIST_NULL;
+ }
+
+ hscb_physaddr = p->fifo_dma;
+ aic_outb(p, hscb_physaddr & 0xFF, SCBID_ADDR);
+ aic_outb(p, (hscb_physaddr >> 8) & 0xFF, SCBID_ADDR + 1);
+ aic_outb(p, (hscb_physaddr >> 16) & 0xFF, SCBID_ADDR + 2);
+ aic_outb(p, (hscb_physaddr >> 24) & 0xFF, SCBID_ADDR + 3);
+ }
+
+ /* The Q-FIFOs we just set up are all empty */
+ aic_outb(p, 0, QINPOS);
+ aic_outb(p, 0, KERNEL_QINPOS);
+ aic_outb(p, 0, QOUTPOS);
+
+ if(p->features & AHC_QUEUE_REGS)
+ {
+ aic_outb(p, SCB_QSIZE_256, QOFF_CTLSTA);
+ aic_outb(p, 0, SDSCB_QOFF);
+ aic_outb(p, 0, SNSCB_QOFF);
+ aic_outb(p, 0, HNSCB_QOFF);
+ }
+
+ /*
+ * We don't have any waiting selections or disconnected SCBs.
+ */
+ aic_outb(p, SCB_LIST_NULL, WAITING_SCBH);
+ aic_outb(p, SCB_LIST_NULL, DISCONNECTED_SCBH);
+
+ /*
+ * Message out buffer starts empty
+ */
+ aic_outb(p, MSG_NOOP, MSG_OUT);
+ aic_outb(p, MSG_NOOP, LAST_MSG);
+
+ /*
+ * Set all the other asundry items that haven't been set yet.
+ * This includes just dumping init values to a lot of registers simply
+ * to make sure they've been touched and are ready for use parity wise
+ * speaking.
+ */
+ aic_outb(p, 0, TMODE_CMDADDR);
+ aic_outb(p, 0, TMODE_CMDADDR + 1);
+ aic_outb(p, 0, TMODE_CMDADDR + 2);
+ aic_outb(p, 0, TMODE_CMDADDR + 3);
+ aic_outb(p, 0, TMODE_CMDADDR_NEXT);
+
+ /*
+ * Link us into the list of valid hosts
+ */
+ p->next = first_aic7xxx;
+ first_aic7xxx = p;
+
+ /*
+ * Allocate the first set of scbs for this controller. This is to stream-
+ * line code elsewhere in the driver. If we have to check for the existence
+ * of scbs in certain code sections, it slows things down. However, as
+ * soon as we register the IRQ for this card, we could get an interrupt that
+ * includes possibly the SCSI_RSTI interrupt. If we catch that interrupt
+ * then we are likely to segfault if we don't have at least one chunk of
+ * SCBs allocated or add checks all through the reset code to make sure
+ * that the SCBs have been allocated which is an invalid running condition
+ * and therefore I think it's preferable to simply pre-allocate the first
+ * chunk of SCBs.
+ */
+ aic7xxx_allocate_scb(p);
+
+ /*
+ * Load the sequencer program, then re-enable the board -
+ * resetting the AIC-7770 disables it, leaving the lights
+ * on with nobody home.
+ */
+ aic7xxx_loadseq(p);
+
+ /*
+ * Make sure the AUTOFLUSHDIS bit is *not* set in the SBLKCTL register
+ */
+ aic_outb(p, aic_inb(p, SBLKCTL) & ~AUTOFLUSHDIS, SBLKCTL);
+
+ if ( (p->chip & AHC_CHIPID_MASK) == AHC_AIC7770 )
+ {
+ aic_outb(p, ENABLE, BCTL); /* Enable the boards BUS drivers. */
+ }
+
+ if ( !(aic7xxx_no_reset) )
+ {
+ if (p->features & AHC_TWIN)
+ {
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk(KERN_INFO "(scsi%d) Resetting channel B\n", p->host_no);
+ aic_outb(p, aic_inb(p, SBLKCTL) | SELBUSB, SBLKCTL);
+ aic7xxx_reset_current_bus(p);
+ aic_outb(p, aic_inb(p, SBLKCTL) & ~SELBUSB, SBLKCTL);
+ }
+ /* Reset SCSI bus A. */
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ { /* In case we are a 3940, 3985, or 7895, print the right channel */
+ char *channel = "";
+ if (p->flags & AHC_MULTI_CHANNEL)
+ {
+ channel = " A";
+ if (p->flags & (AHC_CHNLB|AHC_CHNLC))
+ channel = (p->flags & AHC_CHNLB) ? " B" : " C";
+ }
+ printk(KERN_INFO "(scsi%d) Resetting channel%s\n", p->host_no, channel);
+ }
+
+ aic7xxx_reset_current_bus(p);
+
+ }
+ else
+ {
+ if (!reset_delay)
+ {
+ printk(KERN_INFO "(scsi%d) Not resetting SCSI bus. Note: Don't use "
+ "the no_reset\n", p->host_no);
+ printk(KERN_INFO "(scsi%d) option unless you have a verifiable need "
+ "for it.\n", p->host_no);
+ }
+ }
+
+ /*
+ * Register IRQ with the kernel. Only allow sharing IRQs with
+ * PCI devices.
+ */
+ if (!(p->chip & AHC_PCI))
+ {
+ result = (request_irq(p->irq, do_aic7xxx_isr, 0, "aic7xxx", p));
+ }
+ else
+ {
+ result = (request_irq(p->irq, do_aic7xxx_isr, SA_SHIRQ,
+ "aic7xxx", p));
+ if (result < 0)
+ {
+ result = (request_irq(p->irq, do_aic7xxx_isr, SA_INTERRUPT | SA_SHIRQ,
+ "aic7xxx", p));
+ }
+ }
+ if (result < 0)
+ {
+ printk(KERN_WARNING "(scsi%d) Couldn't register IRQ %d, ignoring "
+ "controller.\n", p->host_no, p->irq);
+ aic_outb(p, 0, SIMODE1);
+ p->irq = 0;
+ return (0);
+ }
+
+ if(aic_inb(p, INTSTAT) & INT_PEND)
+ printk(INFO_LEAD "spurious interrupt during configuration, cleared.\n",
+ p->host_no, -1, -1 , -1);
+ aic7xxx_clear_intstat(p);
+
+ unpause_sequencer(p, /* unpause_always */ TRUE);
+
+ return (found);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_chip_reset
+ *
+ * Description:
+ * Perform a chip reset on the aic7xxx SCSI controller. The controller
+ * is paused upon return.
+ *-F*************************************************************************/
+static int
+aic7xxx_chip_reset(struct aic7xxx_host *p)
+{
+ unsigned char sblkctl;
+ int wait;
+
+ /*
+ * For some 274x boards, we must clear the CHIPRST bit and pause
+ * the sequencer. For some reason, this makes the driver work.
+ */
+ aic_outb(p, PAUSE | CHIPRST, HCNTRL);
+
+ /*
+ * In the future, we may call this function as a last resort for
+ * error handling. Let's be nice and not do any unnecessary delays.
+ */
+ wait = 1000; /* 1 msec (1000 * 1 msec) */
+ while (--wait && !(aic_inb(p, HCNTRL) & CHIPRSTACK))
+ {
+ udelay(1); /* 1 usec */
+ }
+
+ pause_sequencer(p);
+
+ sblkctl = aic_inb(p, SBLKCTL) & (SELBUSB|SELWIDE);
+ if (p->chip & AHC_PCI)
+ sblkctl &= ~SELBUSB;
+ switch( sblkctl )
+ {
+ case 0: /* normal narrow card */
+ break;
+ case 2: /* Wide card */
+ p->features |= AHC_WIDE;
+ break;
+ case 8: /* Twin card */
+ p->features |= AHC_TWIN;
+ p->flags |= AHC_MULTI_CHANNEL;
+ break;
+ default: /* hmmm...we don't know what this is */
+ printk(KERN_WARNING "aic7xxx: Unsupported adapter type %d, ignoring.\n",
+ aic_inb(p, SBLKCTL) & 0x0a);
+ return(-1);
+ }
+ return(0);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_alloc
+ *
+ * Description:
+ * Allocate and initialize a host structure. Returns NULL upon error
+ * and a pointer to a aic7xxx_host struct upon success.
+ *-F*************************************************************************/
+static struct aic7xxx_host *
+aic7xxx_alloc(Scsi_Host_Template *sht, struct aic7xxx_host *temp)
+{
+ struct aic7xxx_host *p = NULL;
+ struct Scsi_Host *host;
+
+ /*
+ * Allocate a storage area by registering us with the mid-level
+ * SCSI layer.
+ */
+ host = scsi_register(sht, sizeof(struct aic7xxx_host));
+
+ if (host != NULL)
+ {
+ p = (struct aic7xxx_host *) host->hostdata;
+ memset(p, 0, sizeof(struct aic7xxx_host));
+ *p = *temp;
+ p->host = host;
+
+ p->scb_data = kmalloc(sizeof(scb_data_type), GFP_ATOMIC);
+ if (p->scb_data != NULL)
+ {
+ memset(p->scb_data, 0, sizeof(scb_data_type));
+ scbq_init (&p->scb_data->free_scbs);
+ }
+ else
+ {
+ /*
+ * For some reason we don't have enough memory. Free the
+ * allocated memory for the aic7xxx_host struct, and return NULL.
+ */
+ release_region(p->base, MAXREG - MINREG);
+ scsi_unregister(host);
+ return(NULL);
+ }
+ p->host_no = host->host_no;
+ }
+ scsi_set_device(host, &p->pdev->dev);
+ return (p);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_free
+ *
+ * Description:
+ * Frees and releases all resources associated with an instance of
+ * the driver (struct aic7xxx_host *).
+ *-F*************************************************************************/
+static void
+aic7xxx_free(struct aic7xxx_host *p)
+{
+ int i;
+
+ /*
+ * Free the allocated hardware SCB space.
+ */
+ if (p->scb_data != NULL)
+ {
+ struct aic7xxx_scb_dma *scb_dma = NULL;
+ if (p->scb_data->hscbs != NULL)
+ {
+ pci_free_consistent(p->pdev, p->scb_data->hscbs_dma_len,
+ p->scb_data->hscbs, p->scb_data->hscbs_dma);
+ p->scb_data->hscbs = p->scb_data->hscb_kmalloc_ptr = NULL;
+ }
+ /*
+ * Free the driver SCBs. These were allocated on an as-need
+ * basis. We allocated these in groups depending on how many
+ * we could fit into a given amount of RAM. The tail SCB for
+ * these allocations has a pointer to the alloced area.
+ */
+ for (i = 0; i < p->scb_data->numscbs; i++)
+ {
+ if (p->scb_data->scb_array[i]->scb_dma != scb_dma)
+ {
+ scb_dma = p->scb_data->scb_array[i]->scb_dma;
+ pci_free_consistent(p->pdev, scb_dma->dma_len,
+ (void *)((unsigned long)scb_dma->dma_address
+ - scb_dma->dma_offset),
+ scb_dma->dma_address);
+ }
+ if (p->scb_data->scb_array[i]->kmalloc_ptr != NULL)
+ kfree(p->scb_data->scb_array[i]->kmalloc_ptr);
+ p->scb_data->scb_array[i] = NULL;
+ }
+
+ /*
+ * Free the SCB data area.
+ */
+ kfree(p->scb_data);
+ }
+
+ pci_free_consistent(p->pdev, 3*256, (void *)p->untagged_scbs, p->fifo_dma);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_load_seeprom
+ *
+ * Description:
+ * Load the seeprom and configure adapter and target settings.
+ * Returns 1 if the load was successful and 0 otherwise.
+ *-F*************************************************************************/
+static void
+aic7xxx_load_seeprom(struct aic7xxx_host *p, unsigned char *sxfrctl1)
+{
+ int have_seeprom = 0;
+ int i, max_targets, mask;
+ unsigned char scsirate, scsi_conf;
+ unsigned short scarray[128];
+ struct seeprom_config *sc = (struct seeprom_config *) scarray;
+
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk(KERN_INFO "aic7xxx: Loading serial EEPROM...");
+ }
+ switch (p->chip)
+ {
+ case (AHC_AIC7770|AHC_EISA): /* None of these adapters have seeproms. */
+ if (aic_inb(p, SCSICONF) & TERM_ENB)
+ p->flags |= AHC_TERM_ENB_A;
+ if ( (p->features & AHC_TWIN) && (aic_inb(p, SCSICONF + 1) & TERM_ENB) )
+ p->flags |= AHC_TERM_ENB_B;
+ break;
+
+ case (AHC_AIC7770|AHC_VL):
+ have_seeprom = read_284x_seeprom(p, (struct seeprom_config *) scarray);
+ break;
+
+ default:
+ have_seeprom = read_seeprom(p, (p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, p->sc_type);
+ if (!have_seeprom)
+ {
+ if(p->sc_type == C46)
+ have_seeprom = read_seeprom(p, (p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, C56_66);
+ else
+ have_seeprom = read_seeprom(p, (p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, C46);
+ }
+ if (!have_seeprom)
+ {
+ p->sc_size = 128;
+ have_seeprom = read_seeprom(p, 4*(p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, p->sc_type);
+ if (!have_seeprom)
+ {
+ if(p->sc_type == C46)
+ have_seeprom = read_seeprom(p, 4*(p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, C56_66);
+ else
+ have_seeprom = read_seeprom(p, 4*(p->flags & (AHC_CHNLB|AHC_CHNLC)),
+ scarray, p->sc_size, C46);
+ }
+ }
+ break;
+ }
+
+ if (!have_seeprom)
+ {
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("\naic7xxx: No SEEPROM available.\n");
+ }
+ p->flags |= AHC_NEWEEPROM_FMT;
+ if (aic_inb(p, SCSISEQ) == 0)
+ {
+ p->flags |= AHC_USEDEFAULTS;
+ p->flags &= ~AHC_BIOS_ENABLED;
+ p->scsi_id = p->scsi_id_b = 7;
+ *sxfrctl1 |= STPWEN;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("aic7xxx: Using default values.\n");
+ }
+ }
+ else if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("aic7xxx: Using leftover BIOS values.\n");
+ }
+ if ( ((p->chip & ~AHC_CHIPID_MASK) == AHC_PCI) && (*sxfrctl1 & STPWEN) )
+ {
+ p->flags |= AHC_TERM_ENB_SE_LOW | AHC_TERM_ENB_SE_HIGH;
+ sc->adapter_control &= ~CFAUTOTERM;
+ sc->adapter_control |= CFSTERM | CFWSTERM | CFLVDSTERM;
+ }
+ if (aic7xxx_extended)
+ p->flags |= (AHC_EXTEND_TRANS_A | AHC_EXTEND_TRANS_B);
+ else
+ p->flags &= ~(AHC_EXTEND_TRANS_A | AHC_EXTEND_TRANS_B);
+ }
+ else
+ {
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("done\n");
+ }
+
+ /*
+ * Note things in our flags
+ */
+ p->flags |= AHC_SEEPROM_FOUND;
+
+ /*
+ * Update the settings in sxfrctl1 to match the termination settings.
+ */
+ *sxfrctl1 = 0;
+
+ /*
+ * Get our SCSI ID from the SEEPROM setting...
+ */
+ p->scsi_id = (sc->brtime_id & CFSCSIID);
+
+ /*
+ * First process the settings that are different between the VLB
+ * and PCI adapter seeproms.
+ */
+ if ((p->chip & AHC_CHIPID_MASK) == AHC_AIC7770)
+ {
+ /* VLB adapter seeproms */
+ if (sc->bios_control & CF284XEXTEND)
+ p->flags |= AHC_EXTEND_TRANS_A;
+
+ if (sc->adapter_control & CF284XSTERM)
+ {
+ *sxfrctl1 |= STPWEN;
+ p->flags |= AHC_TERM_ENB_SE_LOW | AHC_TERM_ENB_SE_HIGH;
+ }
+ }
+ else
+ {
+ /* PCI adapter seeproms */
+ if (sc->bios_control & CFEXTEND)
+ p->flags |= AHC_EXTEND_TRANS_A;
+ if (sc->bios_control & CFBIOSEN)
+ p->flags |= AHC_BIOS_ENABLED;
+ else
+ p->flags &= ~AHC_BIOS_ENABLED;
+
+ if (sc->adapter_control & CFSTERM)
+ {
+ *sxfrctl1 |= STPWEN;
+ p->flags |= AHC_TERM_ENB_SE_LOW | AHC_TERM_ENB_SE_HIGH;
+ }
+ }
+ memcpy(&p->sc, sc, sizeof(struct seeprom_config));
+ }
+
+ p->discenable = 0;
+
+ /*
+ * Limit to 16 targets just in case. The 2842 for one is known to
+ * blow the max_targets setting, future cards might also.
+ */
+ max_targets = ((p->features & (AHC_TWIN | AHC_WIDE)) ? 16 : 8);
+
+ if (have_seeprom)
+ {
+ for (i = 0; i < max_targets; i++)
+ {
+ if( ((p->features & AHC_ULTRA) &&
+ !(sc->adapter_control & CFULTRAEN) &&
+ (sc->device_flags[i] & CFSYNCHISULTRA)) ||
+ (sc->device_flags[i] & CFNEWULTRAFORMAT) )
+ {
+ p->flags |= AHC_NEWEEPROM_FMT;
+ break;
+ }
+ }
+ }
+
+ for (i = 0; i < max_targets; i++)
+ {
+ mask = (0x01 << i);
+ if (!have_seeprom)
+ {
+ if (aic_inb(p, SCSISEQ) != 0)
+ {
+ /*
+ * OK...the BIOS set things up and left behind the settings we need.
+ * Just make our sc->device_flags[i] entry match what the card has
+ * set for this device.
+ */
+ p->discenable =
+ ~(aic_inb(p, DISC_DSB) | (aic_inb(p, DISC_DSB + 1) << 8) );
+ p->ultraenb =
+ (aic_inb(p, ULTRA_ENB) | (aic_inb(p, ULTRA_ENB + 1) << 8) );
+ sc->device_flags[i] = (p->discenable & mask) ? CFDISC : 0;
+ if (aic_inb(p, TARG_SCSIRATE + i) & WIDEXFER)
+ sc->device_flags[i] |= CFWIDEB;
+ if (p->features & AHC_ULTRA2)
+ {
+ if (aic_inb(p, TARG_OFFSET + i))
+ {
+ sc->device_flags[i] |= CFSYNCH;
+ sc->device_flags[i] |= (aic_inb(p, TARG_SCSIRATE + i) & 0x07);
+ if ( (aic_inb(p, TARG_SCSIRATE + i) & 0x18) == 0x18 )
+ sc->device_flags[i] |= CFSYNCHISULTRA;
+ }
+ }
+ else
+ {
+ if (aic_inb(p, TARG_SCSIRATE + i) & ~WIDEXFER)
+ {
+ sc->device_flags[i] |= CFSYNCH;
+ if (p->features & AHC_ULTRA)
+ sc->device_flags[i] |= ((p->ultraenb & mask) ?
+ CFSYNCHISULTRA : 0);
+ }
+ }
+ }
+ else
+ {
+ /*
+ * Assume the BIOS has NOT been run on this card and nothing between
+ * the card and the devices is configured yet.
+ */
+ sc->device_flags[i] = CFDISC;
+ if (p->features & AHC_WIDE)
+ sc->device_flags[i] |= CFWIDEB;
+ if (p->features & AHC_ULTRA3)
+ sc->device_flags[i] |= 2;
+ else if (p->features & AHC_ULTRA2)
+ sc->device_flags[i] |= 3;
+ else if (p->features & AHC_ULTRA)
+ sc->device_flags[i] |= CFSYNCHISULTRA;
+ sc->device_flags[i] |= CFSYNCH;
+ aic_outb(p, 0, TARG_SCSIRATE + i);
+ if (p->features & AHC_ULTRA2)
+ aic_outb(p, 0, TARG_OFFSET + i);
+ }
+ }
+ if (sc->device_flags[i] & CFDISC)
+ {
+ p->discenable |= mask;
+ }
+ if (p->flags & AHC_NEWEEPROM_FMT)
+ {
+ if ( !(p->features & AHC_ULTRA2) )
+ {
+ /*
+ * I know of two different Ultra BIOSes that do this differently.
+ * One on the Gigabyte 6BXU mb that wants flags[i] & CFXFER to
+ * be == to 0x03 and SYNCHISULTRA to be true to mean 40MByte/s
+ * while on the IBM Netfinity 5000 they want the same thing
+ * to be something else, while flags[i] & CFXFER == 0x03 and
+ * SYNCHISULTRA false should be 40MByte/s. So, we set both to
+ * 40MByte/s and the lower speeds be damned. People will have
+ * to select around the conversely mapped lower speeds in order
+ * to select lower speeds on these boards.
+ */
+ if ( (sc->device_flags[i] & CFNEWULTRAFORMAT) &&
+ ((sc->device_flags[i] & CFXFER) == 0x03) )
+ {
+ sc->device_flags[i] &= ~CFXFER;
+ sc->device_flags[i] |= CFSYNCHISULTRA;
+ }
+ if (sc->device_flags[i] & CFSYNCHISULTRA)
+ {
+ p->ultraenb |= mask;
+ }
+ }
+ else if ( !(sc->device_flags[i] & CFNEWULTRAFORMAT) &&
+ (p->features & AHC_ULTRA2) &&
+ (sc->device_flags[i] & CFSYNCHISULTRA) )
+ {
+ p->ultraenb |= mask;
+ }
+ }
+ else if (sc->adapter_control & CFULTRAEN)
+ {
+ p->ultraenb |= mask;
+ }
+ if ( (sc->device_flags[i] & CFSYNCH) == 0)
+ {
+ sc->device_flags[i] &= ~CFXFER;
+ p->ultraenb &= ~mask;
+ p->user[i].offset = 0;
+ p->user[i].period = 0;
+ p->user[i].options = 0;
+ }
+ else
+ {
+ if (p->features & AHC_ULTRA3)
+ {
+ p->user[i].offset = MAX_OFFSET_ULTRA2;
+ if( (sc->device_flags[i] & CFXFER) < 0x03 )
+ {
+ scsirate = (sc->device_flags[i] & CFXFER);
+ p->user[i].options = MSG_EXT_PPR_OPTION_DT_CRC;
+ }
+ else
+ {
+ scsirate = (sc->device_flags[i] & CFXFER) |
+ ((p->ultraenb & mask) ? 0x18 : 0x10);
+ p->user[i].options = 0;
+ }
+ p->user[i].period = aic7xxx_find_period(p, scsirate,
+ AHC_SYNCRATE_ULTRA3);
+ }
+ else if (p->features & AHC_ULTRA2)
+ {
+ p->user[i].offset = MAX_OFFSET_ULTRA2;
+ scsirate = (sc->device_flags[i] & CFXFER) |
+ ((p->ultraenb & mask) ? 0x18 : 0x10);
+ p->user[i].options = 0;
+ p->user[i].period = aic7xxx_find_period(p, scsirate,
+ AHC_SYNCRATE_ULTRA2);
+ }
+ else
+ {
+ scsirate = (sc->device_flags[i] & CFXFER) << 4;
+ p->user[i].options = 0;
+ p->user[i].offset = MAX_OFFSET_8BIT;
+ if (p->features & AHC_ULTRA)
+ {
+ short ultraenb;
+ ultraenb = aic_inb(p, ULTRA_ENB) |
+ (aic_inb(p, ULTRA_ENB + 1) << 8);
+ p->user[i].period = aic7xxx_find_period(p, scsirate,
+ (p->ultraenb & mask) ?
+ AHC_SYNCRATE_ULTRA :
+ AHC_SYNCRATE_FAST);
+ }
+ else
+ p->user[i].period = aic7xxx_find_period(p, scsirate,
+ AHC_SYNCRATE_FAST);
+ }
+ }
+ if ( (sc->device_flags[i] & CFWIDEB) && (p->features & AHC_WIDE) )
+ {
+ p->user[i].width = MSG_EXT_WDTR_BUS_16_BIT;
+ }
+ else
+ {
+ p->user[i].width = MSG_EXT_WDTR_BUS_8_BIT;
+ }
+ }
+ aic_outb(p, ~(p->discenable & 0xFF), DISC_DSB);
+ aic_outb(p, ~((p->discenable >> 8) & 0xFF), DISC_DSB + 1);
+
+ /*
+ * We set the p->ultraenb from the SEEPROM to begin with, but now we make
+ * it match what is already down in the card. If we are doing a reset
+ * on the card then this will get put back to a default state anyway.
+ * This allows us to not have to pre-emptively negotiate when using the
+ * no_reset option.
+ */
+ if (p->features & AHC_ULTRA)
+ p->ultraenb = aic_inb(p, ULTRA_ENB) | (aic_inb(p, ULTRA_ENB + 1) << 8);
+
+
+ scsi_conf = (p->scsi_id & HSCSIID);
+
+ if(have_seeprom)
+ {
+ p->adapter_control = sc->adapter_control;
+ p->bios_control = sc->bios_control;
+
+ switch (p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7895:
+ case AHC_AIC7896:
+ case AHC_AIC7899:
+ if (p->adapter_control & CFBPRIMARY)
+ p->flags |= AHC_CHANNEL_B_PRIMARY;
+ default:
+ break;
+ }
+
+ if (sc->adapter_control & CFSPARITY)
+ scsi_conf |= ENSPCHK;
+ }
+ else
+ {
+ scsi_conf |= ENSPCHK | RESET_SCSI;
+ }
+
+ /*
+ * Only set the SCSICONF and SCSICONF + 1 registers if we are a PCI card.
+ * The 2842 and 2742 cards already have these registers set and we don't
+ * want to muck with them since we don't set all the bits they do.
+ */
+ if ( (p->chip & ~AHC_CHIPID_MASK) == AHC_PCI )
+ {
+ /* Set the host ID */
+ aic_outb(p, scsi_conf, SCSICONF);
+ /* In case we are a wide card */
+ aic_outb(p, p->scsi_id, SCSICONF + 1);
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_configure_bugs
+ *
+ * Description:
+ * Take the card passed in and set the appropriate bug flags based upon
+ * the card model. Also make any changes needed to device registers or
+ * PCI registers while we are here.
+ *-F*************************************************************************/
+static void
+aic7xxx_configure_bugs(struct aic7xxx_host *p)
+{
+ unsigned short tmp_word;
+
+ switch(p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7860:
+ p->bugs |= AHC_BUG_PCI_2_1_RETRY;
+ /* fall through */
+ case AHC_AIC7850:
+ case AHC_AIC7870:
+ p->bugs |= AHC_BUG_TMODE_WIDEODD | AHC_BUG_CACHETHEN | AHC_BUG_PCI_MWI;
+ break;
+ case AHC_AIC7880:
+ p->bugs |= AHC_BUG_TMODE_WIDEODD | AHC_BUG_PCI_2_1_RETRY |
+ AHC_BUG_CACHETHEN | AHC_BUG_PCI_MWI;
+ break;
+ case AHC_AIC7890:
+ p->bugs |= AHC_BUG_AUTOFLUSH | AHC_BUG_CACHETHEN;
+ break;
+ case AHC_AIC7892:
+ p->bugs |= AHC_BUG_SCBCHAN_UPLOAD;
+ break;
+ case AHC_AIC7895:
+ p->bugs |= AHC_BUG_TMODE_WIDEODD | AHC_BUG_PCI_2_1_RETRY |
+ AHC_BUG_CACHETHEN | AHC_BUG_PCI_MWI;
+ break;
+ case AHC_AIC7896:
+ p->bugs |= AHC_BUG_CACHETHEN_DIS;
+ break;
+ case AHC_AIC7899:
+ p->bugs |= AHC_BUG_SCBCHAN_UPLOAD;
+ break;
+ default:
+ /* Nothing to do */
+ break;
+ }
+
+ /*
+ * Now handle the bugs that require PCI register or card register tweaks
+ */
+ pci_read_config_word(p->pdev, PCI_COMMAND, &tmp_word);
+ if(p->bugs & AHC_BUG_PCI_MWI)
+ {
+ tmp_word &= ~PCI_COMMAND_INVALIDATE;
+ }
+ else
+ {
+ tmp_word |= PCI_COMMAND_INVALIDATE;
+ }
+ pci_write_config_word(p->pdev, PCI_COMMAND, tmp_word);
+
+ if(p->bugs & AHC_BUG_CACHETHEN)
+ {
+ aic_outb(p, aic_inb(p, DSCOMMAND0) & ~CACHETHEN, DSCOMMAND0);
+ }
+ else if (p->bugs & AHC_BUG_CACHETHEN_DIS)
+ {
+ aic_outb(p, aic_inb(p, DSCOMMAND0) | CACHETHEN, DSCOMMAND0);
+ }
+
+ return;
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_detect
+ *
+ * Description:
+ * Try to detect and register an Adaptec 7770 or 7870 SCSI controller.
+ *
+ * XXX - This should really be called aic7xxx_probe(). A sequence of
+ * probe(), attach()/detach(), and init() makes more sense than
+ * one do-it-all function. This may be useful when (and if) the
+ * mid-level SCSI code is overhauled.
+ *-F*************************************************************************/
+static int
+aic7xxx_detect(Scsi_Host_Template *template)
+{
+ struct aic7xxx_host *temp_p = NULL;
+ struct aic7xxx_host *current_p = NULL;
+ struct aic7xxx_host *list_p = NULL;
+ int found = 0;
+#if defined(__i386__) || defined(__alpha__)
+ ahc_flag_type flags = 0;
+ int type;
+#endif
+ unsigned char sxfrctl1;
+#if defined(__i386__) || defined(__alpha__)
+ unsigned char hcntrl, hostconf;
+ unsigned int slot, base;
+#endif
+
+#ifdef MODULE
+ /*
+ * If we are called as a module, the aic7xxx pointer may not be null
+ * and it would point to our bootup string, just like on the lilo
+ * command line. IF not NULL, then process this config string with
+ * aic7xxx_setup
+ */
+ if(aic7xxx)
+ aic7xxx_setup(aic7xxx);
+#endif
+
+ template->proc_name = "aic7xxx";
+ template->sg_tablesize = AIC7XXX_MAX_SG;
+
+
+#ifdef CONFIG_PCI
+ /*
+ * PCI-bus probe.
+ */
+ {
+ static struct
+ {
+ unsigned short vendor_id;
+ unsigned short device_id;
+ ahc_chip chip;
+ ahc_flag_type flags;
+ ahc_feature features;
+ int board_name_index;
+ unsigned short seeprom_size;
+ unsigned short seeprom_type;
+ } const aic_pdevs[] = {
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7810, AHC_NONE,
+ AHC_FNONE, AHC_FENONE, 1,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7850, AHC_AIC7850,
+ AHC_PAGESCBS, AHC_AIC7850_FE, 5,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7855, AHC_AIC7850,
+ AHC_PAGESCBS, AHC_AIC7850_FE, 6,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7821, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7860_FE, 7,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_3860, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7860_FE, 7,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_38602, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7860_FE, 7,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_38602, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7860_FE, 7,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7860, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MOTHERBOARD,
+ AHC_AIC7860_FE, 7,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7861, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7860_FE, 8,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7870, AHC_AIC7870,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MOTHERBOARD,
+ AHC_AIC7870_FE, 9,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7871, AHC_AIC7870,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7870_FE, 10,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7872, AHC_AIC7870,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7870_FE, 11,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7873, AHC_AIC7870,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7870_FE, 12,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7874, AHC_AIC7870,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7870_FE, 13,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7880, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MOTHERBOARD,
+ AHC_AIC7880_FE, 14,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7881, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE, 15,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7882, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7880_FE, 16,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7883, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7880_FE, 17,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7884, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE, 18,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7885, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE, 18,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7886, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE, 18,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7887, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE | AHC_NEW_AUTOTERM, 19,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7888, AHC_AIC7880,
+ AHC_PAGESCBS | AHC_BIOS_ENABLED, AHC_AIC7880_FE, 18,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_7895, AHC_AIC7895,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7895_FE, 20,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7890, AHC_AIC7890,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7890_FE, 21,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7890B, AHC_AIC7890,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7890_FE, 21,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_2930U2, AHC_AIC7890,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7890_FE, 22,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_2940U2, AHC_AIC7890,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7890_FE, 23,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7896, AHC_AIC7896,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7896_FE, 24,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_3940U2, AHC_AIC7896,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7896_FE, 25,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_3950U2D, AHC_AIC7896,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7896_FE, 26,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC, PCI_DEVICE_ID_ADAPTEC_1480A, AHC_AIC7860,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_NO_STPWEN,
+ AHC_AIC7860_FE, 27,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7892A, AHC_AIC7892,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7892_FE, 28,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7892B, AHC_AIC7892,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7892_FE, 28,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7892D, AHC_AIC7892,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7892_FE, 28,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7892P, AHC_AIC7892,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED,
+ AHC_AIC7892_FE, 28,
+ 32, C46 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7899A, AHC_AIC7899,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7899_FE, 29,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7899B, AHC_AIC7899,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7899_FE, 29,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7899D, AHC_AIC7899,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7899_FE, 29,
+ 32, C56_66 },
+ {PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_7899P, AHC_AIC7899,
+ AHC_PAGESCBS | AHC_NEWEEPROM_FMT | AHC_BIOS_ENABLED | AHC_MULTI_CHANNEL,
+ AHC_AIC7899_FE, 29,
+ 32, C56_66 },
+ };
+
+ unsigned short command;
+ unsigned int devconfig, i, oldverbose;
+ struct pci_dev *pdev = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(aic_pdevs); i++)
+ {
+ pdev = NULL;
+ while ((pdev = pci_find_device(aic_pdevs[i].vendor_id,
+ aic_pdevs[i].device_id,
+ pdev))) {
+ if (pci_enable_device(pdev))
+ continue;
+ if ( i == 0 ) /* We found one, but it's the 7810 RAID cont. */
+ {
+ if (aic7xxx_verbose & (VERBOSE_PROBE|VERBOSE_PROBE2))
+ {
+ printk(KERN_INFO "aic7xxx: The 7810 RAID controller is not "
+ "supported by\n");
+ printk(KERN_INFO " this driver, we are ignoring it.\n");
+ }
+ }
+ else if ( (temp_p = kmalloc(sizeof(struct aic7xxx_host),
+ GFP_ATOMIC)) != NULL )
+ {
+ memset(temp_p, 0, sizeof(struct aic7xxx_host));
+ temp_p->chip = aic_pdevs[i].chip | AHC_PCI;
+ temp_p->flags = aic_pdevs[i].flags;
+ temp_p->features = aic_pdevs[i].features;
+ temp_p->board_name_index = aic_pdevs[i].board_name_index;
+ temp_p->sc_size = aic_pdevs[i].seeprom_size;
+ temp_p->sc_type = aic_pdevs[i].seeprom_type;
+
+ /*
+ * Read sundry information from PCI BIOS.
+ */
+ temp_p->irq = pdev->irq;
+ temp_p->pdev = pdev;
+ temp_p->pci_bus = pdev->bus->number;
+ temp_p->pci_device_fn = pdev->devfn;
+ temp_p->base = pci_resource_start(pdev, 0);
+ temp_p->mbase = pci_resource_start(pdev, 1);
+ current_p = list_p;
+ while(current_p && temp_p)
+ {
+ if ( ((current_p->pci_bus == temp_p->pci_bus) &&
+ (current_p->pci_device_fn == temp_p->pci_device_fn)) ||
+ (temp_p->base && (current_p->base == temp_p->base)) ||
+ (temp_p->mbase && (current_p->mbase == temp_p->mbase)) )
+ {
+ /* duplicate PCI entry, skip it */
+ kfree(temp_p);
+ temp_p = NULL;
+ continue;
+ }
+ current_p = current_p->next;
+ }
+ if(pci_request_regions(temp_p->pdev, "aic7xxx"))
+ {
+ printk("aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk("aic7xxx: I/O ports already in use, ignoring.\n");
+ kfree(temp_p);
+ continue;
+ }
+
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("aic7xxx: <%s> at PCI %d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ PCI_SLOT(pdev->devfn),
+ PCI_FUNC(pdev->devfn));
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("aic7xxx: Initial PCI_COMMAND value was 0x%x\n",
+ (int)command);
+ }
+#ifdef AIC7XXX_STRICT_PCI_SETUP
+ command |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+#else
+ command |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+#endif
+ command &= ~PCI_COMMAND_INVALIDATE;
+ if (aic7xxx_pci_parity == 0)
+ command &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
+ pci_write_config_word(pdev, PCI_COMMAND, command);
+#ifdef AIC7XXX_STRICT_PCI_SETUP
+ pci_read_config_dword(pdev, DEVCONFIG, &devconfig);
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk("aic7xxx: Initial DEVCONFIG value was 0x%x\n", devconfig);
+ }
+ devconfig |= 0x80000040;
+ pci_write_config_dword(pdev, DEVCONFIG, devconfig);
+#endif /* AIC7XXX_STRICT_PCI_SETUP */
+
+ temp_p->unpause = INTEN;
+ temp_p->pause = temp_p->unpause | PAUSE;
+ if ( ((temp_p->base == 0) &&
+ (temp_p->mbase == 0)) ||
+ (temp_p->irq == 0) )
+ {
+ printk("aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk("aic7xxx: Controller disabled by BIOS, ignoring.\n");
+ goto skip_pci_controller;
+ }
+
+#ifdef MMAPIO
+ if ( !(temp_p->base) || !(temp_p->flags & AHC_MULTI_CHANNEL) ||
+ ((temp_p->chip != (AHC_AIC7870 | AHC_PCI)) &&
+ (temp_p->chip != (AHC_AIC7880 | AHC_PCI))) )
+ {
+ temp_p->maddr = ioremap_nocache(temp_p->mbase, 256);
+ if(temp_p->maddr)
+ {
+ /*
+ * We need to check the I/O with the MMAPed address. Some machines
+ * simply fail to work with MMAPed I/O and certain controllers.
+ */
+ if(aic_inb(temp_p, HCNTRL) == 0xff)
+ {
+ /*
+ * OK.....we failed our test....go back to programmed I/O
+ */
+ printk(KERN_INFO "aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk(KERN_INFO "aic7xxx: MMAPed I/O failed, reverting to "
+ "Programmed I/O.\n");
+ iounmap(temp_p->maddr);
+ temp_p->maddr = NULL;
+ if(temp_p->base == 0)
+ {
+ printk("aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk("aic7xxx: Controller disabled by BIOS, ignoring.\n");
+ goto skip_pci_controller;
+ }
+ }
+ }
+ }
+#endif
+
+ /*
+ * We HAVE to make sure the first pause_sequencer() and all other
+ * subsequent I/O that isn't PCI config space I/O takes place
+ * after the MMAPed I/O region is configured and tested. The
+ * problem is the PowerPC architecture that doesn't support
+ * programmed I/O at all, so we have to have the MMAP I/O set up
+ * for this pause to even work on those machines.
+ */
+ pause_sequencer(temp_p);
+
+ /*
+ * Clear out any pending PCI error status messages. Also set
+ * verbose to 0 so that we don't emit strange PCI error messages
+ * while cleaning out the current status bits.
+ */
+ oldverbose = aic7xxx_verbose;
+ aic7xxx_verbose = 0;
+ aic7xxx_pci_intr(temp_p);
+ aic7xxx_verbose = oldverbose;
+
+ temp_p->bios_address = 0;
+
+ /*
+ * Remember how the card was setup in case there is no seeprom.
+ */
+ if (temp_p->features & AHC_ULTRA2)
+ temp_p->scsi_id = aic_inb(temp_p, SCSIID_ULTRA2) & OID;
+ else
+ temp_p->scsi_id = aic_inb(temp_p, SCSIID) & OID;
+ /*
+ * Get current termination setting
+ */
+ sxfrctl1 = aic_inb(temp_p, SXFRCTL1);
+
+ if (aic7xxx_chip_reset(temp_p) == -1)
+ {
+ goto skip_pci_controller;
+ }
+ /*
+ * Very quickly put the term setting back into the register since
+ * the chip reset may cause odd things to happen. This is to keep
+ * LVD busses with lots of drives from draining the power out of
+ * the diffsense line before we get around to running the
+ * configure_termination() function. Also restore the STPWLEVEL
+ * bit of DEVCONFIG
+ */
+ aic_outb(temp_p, sxfrctl1, SXFRCTL1);
+ pci_write_config_dword(temp_p->pdev, DEVCONFIG, devconfig);
+ sxfrctl1 &= STPWEN;
+
+ /*
+ * We need to set the CHNL? assignments before loading the SEEPROM
+ * The 3940 and 3985 cards (original stuff, not any of the later
+ * stuff) are 7870 and 7880 class chips. The Ultra2 stuff falls
+ * under 7896 and 7897. The 7895 is in a class by itself :)
+ */
+ switch (temp_p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7870: /* 3840 / 3985 */
+ case AHC_AIC7880: /* 3840 UW / 3985 UW */
+ if(temp_p->flags & AHC_MULTI_CHANNEL)
+ {
+ switch(PCI_SLOT(temp_p->pci_device_fn))
+ {
+ case 5:
+ temp_p->flags |= AHC_CHNLB;
+ break;
+ case 8:
+ temp_p->flags |= AHC_CHNLB;
+ break;
+ case 12:
+ temp_p->flags |= AHC_CHNLC;
+ break;
+ default:
+ break;
+ }
+ }
+ break;
+
+ case AHC_AIC7895: /* 7895 */
+ case AHC_AIC7896: /* 7896/7 */
+ case AHC_AIC7899: /* 7899 */
+ if (PCI_FUNC(pdev->devfn) != 0)
+ {
+ temp_p->flags |= AHC_CHNLB;
+ }
+ /*
+ * The 7895 is the only chipset that sets the SCBSIZE32 param
+ * in the DEVCONFIG register. The Ultra2 chipsets use
+ * the DSCOMMAND0 register instead.
+ */
+ if ((temp_p->chip & AHC_CHIPID_MASK) == AHC_AIC7895)
+ {
+ pci_read_config_dword(pdev, DEVCONFIG, &devconfig);
+ devconfig |= SCBSIZE32;
+ pci_write_config_dword(pdev, DEVCONFIG, devconfig);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Loading of the SEEPROM needs to come after we've set the flags
+ * to indicate possible CHNLB and CHNLC assigments. Otherwise,
+ * on 394x and 398x cards we'll end up reading the wrong settings
+ * for channels B and C
+ */
+ switch (temp_p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7892:
+ case AHC_AIC7899:
+ aic_outb(temp_p, 0, SCAMCTL);
+ /*
+ * Switch to the alt mode of the chip...
+ */
+ aic_outb(temp_p, aic_inb(temp_p, SFUNCT) | ALT_MODE, SFUNCT);
+ /*
+ * Set our options...the last two items set our CRC after x byte
+ * count in target mode...
+ */
+ aic_outb(temp_p, AUTO_MSGOUT_DE | DIS_MSGIN_DUALEDGE, OPTIONMODE);
+ aic_outb(temp_p, 0x00, 0x0b);
+ aic_outb(temp_p, 0x10, 0x0a);
+ /*
+ * switch back to normal mode...
+ */
+ aic_outb(temp_p, aic_inb(temp_p, SFUNCT) & ~ALT_MODE, SFUNCT);
+ aic_outb(temp_p, CRCVALCHKEN | CRCENDCHKEN | CRCREQCHKEN |
+ TARGCRCENDEN | TARGCRCCNTEN,
+ CRCCONTROL1);
+ aic_outb(temp_p, ((aic_inb(temp_p, DSCOMMAND0) | USCBSIZE32 |
+ MPARCKEN | CIOPARCKEN | CACHETHEN) &
+ ~DPARCKEN), DSCOMMAND0);
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ break;
+ case AHC_AIC7890:
+ case AHC_AIC7896:
+ aic_outb(temp_p, 0, SCAMCTL);
+ aic_outb(temp_p, (aic_inb(temp_p, DSCOMMAND0) |
+ CACHETHEN | MPARCKEN | USCBSIZE32 |
+ CIOPARCKEN) & ~DPARCKEN, DSCOMMAND0);
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ break;
+ case AHC_AIC7850:
+ case AHC_AIC7860:
+ /*
+ * Set the DSCOMMAND0 register on these cards different from
+ * on the 789x cards. Also, read the SEEPROM as well.
+ */
+ aic_outb(temp_p, (aic_inb(temp_p, DSCOMMAND0) |
+ CACHETHEN | MPARCKEN) & ~DPARCKEN,
+ DSCOMMAND0);
+ /* FALLTHROUGH */
+ default:
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ break;
+ case AHC_AIC7880:
+ /*
+ * Check the rev of the chipset before we change DSCOMMAND0
+ */
+ pci_read_config_dword(pdev, DEVCONFIG, &devconfig);
+ if ((devconfig & 0xff) >= 1)
+ {
+ aic_outb(temp_p, (aic_inb(temp_p, DSCOMMAND0) |
+ CACHETHEN | MPARCKEN) & ~DPARCKEN,
+ DSCOMMAND0);
+ }
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ break;
+ }
+
+
+ /*
+ * and then we need another switch based on the type in order to
+ * make sure the channel B primary flag is set properly on 7895
+ * controllers....Arrrgggghhh!!! We also have to catch the fact
+ * that when you disable the BIOS on the 7895 on the Intel DK440LX
+ * motherboard, and possibly others, it only sets the BIOS disabled
+ * bit on the A channel...I think I'm starting to lean towards
+ * going postal....
+ */
+ switch(temp_p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7895:
+ case AHC_AIC7896:
+ case AHC_AIC7899:
+ current_p = list_p;
+ while(current_p != NULL)
+ {
+ if ( (current_p->pci_bus == temp_p->pci_bus) &&
+ (PCI_SLOT(current_p->pci_device_fn) ==
+ PCI_SLOT(temp_p->pci_device_fn)) )
+ {
+ if ( PCI_FUNC(current_p->pci_device_fn) == 0 )
+ {
+ temp_p->flags |=
+ (current_p->flags & AHC_CHANNEL_B_PRIMARY);
+ temp_p->flags &= ~(AHC_BIOS_ENABLED|AHC_USEDEFAULTS);
+ temp_p->flags |=
+ (current_p->flags & (AHC_BIOS_ENABLED|AHC_USEDEFAULTS));
+ }
+ else
+ {
+ current_p->flags |=
+ (temp_p->flags & AHC_CHANNEL_B_PRIMARY);
+ current_p->flags &= ~(AHC_BIOS_ENABLED|AHC_USEDEFAULTS);
+ current_p->flags |=
+ (temp_p->flags & (AHC_BIOS_ENABLED|AHC_USEDEFAULTS));
+ }
+ }
+ current_p = current_p->next;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * We only support external SCB RAM on the 7895/6/7 chipsets.
+ * We could support it on the 7890/1 easy enough, but I don't
+ * know of any 7890/1 based cards that have it. I do know
+ * of 7895/6/7 cards that have it and they work properly.
+ */
+ switch(temp_p->chip & AHC_CHIPID_MASK)
+ {
+ default:
+ break;
+ case AHC_AIC7895:
+ case AHC_AIC7896:
+ case AHC_AIC7899:
+ pci_read_config_dword(pdev, DEVCONFIG, &devconfig);
+ if (temp_p->features & AHC_ULTRA2)
+ {
+ if ( (aic_inb(temp_p, DSCOMMAND0) & RAMPSM_ULTRA2) &&
+ (aic7xxx_scbram) )
+ {
+ aic_outb(temp_p,
+ aic_inb(temp_p, DSCOMMAND0) & ~SCBRAMSEL_ULTRA2,
+ DSCOMMAND0);
+ temp_p->flags |= AHC_EXTERNAL_SRAM;
+ devconfig |= EXTSCBPEN;
+ }
+ else if (aic_inb(temp_p, DSCOMMAND0) & RAMPSM_ULTRA2)
+ {
+ printk(KERN_INFO "aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk("aic7xxx: external SCB RAM detected, "
+ "but not enabled\n");
+ }
+ }
+ else
+ {
+ if ((devconfig & RAMPSM) && (aic7xxx_scbram))
+ {
+ devconfig &= ~SCBRAMSEL;
+ devconfig |= EXTSCBPEN;
+ temp_p->flags |= AHC_EXTERNAL_SRAM;
+ }
+ else if (devconfig & RAMPSM)
+ {
+ printk(KERN_INFO "aic7xxx: <%s> at PCI %d/%d/%d\n",
+ board_names[aic_pdevs[i].board_name_index],
+ temp_p->pci_bus,
+ PCI_SLOT(temp_p->pci_device_fn),
+ PCI_FUNC(temp_p->pci_device_fn));
+ printk("aic7xxx: external SCB RAM detected, "
+ "but not enabled\n");
+ }
+ }
+ pci_write_config_dword(pdev, DEVCONFIG, devconfig);
+ if ( (temp_p->flags & AHC_EXTERNAL_SRAM) &&
+ (temp_p->flags & AHC_CHNLB) )
+ aic_outb(temp_p, 1, CCSCBBADDR);
+ break;
+ }
+
+ /*
+ * Take the LED out of diagnostic mode
+ */
+ aic_outb(temp_p,
+ (aic_inb(temp_p, SBLKCTL) & ~(DIAGLEDEN | DIAGLEDON)),
+ SBLKCTL);
+
+ /*
+ * We don't know where this is set in the SEEPROM or by the
+ * BIOS, so we default to 100%. On Ultra2 controllers, use 75%
+ * instead.
+ */
+ if (temp_p->features & AHC_ULTRA2)
+ {
+ aic_outb(temp_p, RD_DFTHRSH_MAX | WR_DFTHRSH_MAX, DFF_THRSH);
+ }
+ else
+ {
+ aic_outb(temp_p, DFTHRSH_100, DSPCISTATUS);
+ }
+
+ /*
+ * Call our function to fixup any bugs that exist on this chipset.
+ * This may muck with PCI settings and other device settings, so
+ * make sure it's after all the other PCI and device register
+ * tweaks so it can back out bad settings on specific broken cards.
+ */
+ aic7xxx_configure_bugs(temp_p);
+
+ if ( list_p == NULL )
+ {
+ list_p = current_p = temp_p;
+ }
+ else
+ {
+ current_p = list_p;
+ while(current_p->next != NULL)
+ current_p = current_p->next;
+ current_p->next = temp_p;
+ }
+ temp_p->next = NULL;
+ found++;
+ continue;
+skip_pci_controller:
+#ifdef CONFIG_PCI
+ pci_release_regions(temp_p->pdev);
+#endif
+ kfree(temp_p);
+ } /* Found an Adaptec PCI device. */
+ else /* Well, we found one, but we couldn't get any memory */
+ {
+ printk("aic7xxx: Found <%s>\n",
+ board_names[aic_pdevs[i].board_name_index]);
+ printk(KERN_INFO "aic7xxx: Unable to allocate device memory, "
+ "skipping.\n");
+ }
+ } /* while(pdev=....) */
+ } /* for PCI_DEVICES */
+ }
+#endif /* CONFIG_PCI */
+
+#if defined(__i386__) || defined(__alpha__)
+ /*
+ * EISA/VL-bus card signature probe.
+ */
+ slot = MINSLOT;
+ while ( (slot <= MAXSLOT) &&
+ !(aic7xxx_no_probe) )
+ {
+ base = SLOTBASE(slot) + MINREG;
+
+ if (!request_region(base, MAXREG - MINREG, "aic7xxx"))
+ {
+ /*
+ * Some other driver has staked a
+ * claim to this i/o region already.
+ */
+ slot++;
+ continue; /* back to the beginning of the for loop */
+ }
+ flags = 0;
+ type = aic7xxx_probe(slot, base + AHC_HID0, &flags);
+ if (type == -1)
+ {
+ release_region(base, MAXREG - MINREG);
+ slot++;
+ continue;
+ }
+ temp_p = kmalloc(sizeof(struct aic7xxx_host), GFP_ATOMIC);
+ if (temp_p == NULL)
+ {
+ printk(KERN_WARNING "aic7xxx: Unable to allocate device space.\n");
+ release_region(base, MAXREG - MINREG);
+ slot++;
+ continue; /* back to the beginning of the while loop */
+ }
+
+ /*
+ * Pause the card preserving the IRQ type. Allow the operator
+ * to override the IRQ trigger.
+ */
+ if (aic7xxx_irq_trigger == 1)
+ hcntrl = IRQMS; /* Level */
+ else if (aic7xxx_irq_trigger == 0)
+ hcntrl = 0; /* Edge */
+ else
+ hcntrl = inb(base + HCNTRL) & IRQMS; /* Default */
+ memset(temp_p, 0, sizeof(struct aic7xxx_host));
+ temp_p->unpause = hcntrl | INTEN;
+ temp_p->pause = hcntrl | PAUSE | INTEN;
+ temp_p->base = base;
+ temp_p->mbase = 0;
+ temp_p->maddr = NULL;
+ temp_p->pci_bus = 0;
+ temp_p->pci_device_fn = slot;
+ aic_outb(temp_p, hcntrl | PAUSE, HCNTRL);
+ while( (aic_inb(temp_p, HCNTRL) & PAUSE) == 0 ) ;
+ if (aic7xxx_chip_reset(temp_p) == -1)
+ temp_p->irq = 0;
+ else
+ temp_p->irq = aic_inb(temp_p, INTDEF) & 0x0F;
+ temp_p->flags |= AHC_PAGESCBS;
+
+ switch (temp_p->irq)
+ {
+ case 9:
+ case 10:
+ case 11:
+ case 12:
+ case 14:
+ case 15:
+ break;
+
+ default:
+ printk(KERN_WARNING "aic7xxx: Host adapter uses unsupported IRQ "
+ "level %d, ignoring.\n", temp_p->irq);
+ kfree(temp_p);
+ release_region(base, MAXREG - MINREG);
+ slot++;
+ continue; /* back to the beginning of the while loop */
+ }
+
+ /*
+ * We are commited now, everything has been checked and this card
+ * has been found, now we just set it up
+ */
+
+ /*
+ * Insert our new struct into the list at the end
+ */
+ if (list_p == NULL)
+ {
+ list_p = current_p = temp_p;
+ }
+ else
+ {
+ current_p = list_p;
+ while (current_p->next != NULL)
+ current_p = current_p->next;
+ current_p->next = temp_p;
+ }
+
+ switch (type)
+ {
+ case 0:
+ temp_p->board_name_index = 2;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("aic7xxx: <%s> at EISA %d\n",
+ board_names[2], slot);
+ /* FALLTHROUGH */
+ case 1:
+ {
+ temp_p->chip = AHC_AIC7770 | AHC_EISA;
+ temp_p->features |= AHC_AIC7770_FE;
+ temp_p->bios_control = aic_inb(temp_p, HA_274_BIOSCTRL);
+
+ /*
+ * Get the primary channel information. Right now we don't
+ * do anything with this, but someday we will be able to inform
+ * the mid-level SCSI code which channel is primary.
+ */
+ if (temp_p->board_name_index == 0)
+ {
+ temp_p->board_name_index = 3;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("aic7xxx: <%s> at EISA %d\n",
+ board_names[3], slot);
+ }
+ if (temp_p->bios_control & CHANNEL_B_PRIMARY)
+ {
+ temp_p->flags |= AHC_CHANNEL_B_PRIMARY;
+ }
+
+ if ((temp_p->bios_control & BIOSMODE) == BIOSDISABLED)
+ {
+ temp_p->flags &= ~AHC_BIOS_ENABLED;
+ }
+ else
+ {
+ temp_p->flags &= ~AHC_USEDEFAULTS;
+ temp_p->flags |= AHC_BIOS_ENABLED;
+ if ( (temp_p->bios_control & 0x20) == 0 )
+ {
+ temp_p->bios_address = 0xcc000;
+ temp_p->bios_address += (0x4000 * (temp_p->bios_control & 0x07));
+ }
+ else
+ {
+ temp_p->bios_address = 0xd0000;
+ temp_p->bios_address += (0x8000 * (temp_p->bios_control & 0x06));
+ }
+ }
+ temp_p->adapter_control = aic_inb(temp_p, SCSICONF) << 8;
+ temp_p->adapter_control |= aic_inb(temp_p, SCSICONF + 1);
+ if (temp_p->features & AHC_WIDE)
+ {
+ temp_p->scsi_id = temp_p->adapter_control & HWSCSIID;
+ temp_p->scsi_id_b = temp_p->scsi_id;
+ }
+ else
+ {
+ temp_p->scsi_id = (temp_p->adapter_control >> 8) & HSCSIID;
+ temp_p->scsi_id_b = temp_p->adapter_control & HSCSIID;
+ }
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ break;
+ }
+
+ case 2:
+ case 3:
+ temp_p->chip = AHC_AIC7770 | AHC_VL;
+ temp_p->features |= AHC_AIC7770_FE;
+ if (type == 2)
+ temp_p->flags |= AHC_BIOS_ENABLED;
+ else
+ temp_p->flags &= ~AHC_BIOS_ENABLED;
+ if (aic_inb(temp_p, SCSICONF) & TERM_ENB)
+ sxfrctl1 = STPWEN;
+ aic7xxx_load_seeprom(temp_p, &sxfrctl1);
+ temp_p->board_name_index = 4;
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ printk("aic7xxx: <%s> at VLB %d\n",
+ board_names[2], slot);
+ switch( aic_inb(temp_p, STATUS_2840) & BIOS_SEL )
+ {
+ case 0x00:
+ temp_p->bios_address = 0xe0000;
+ break;
+ case 0x20:
+ temp_p->bios_address = 0xc8000;
+ break;
+ case 0x40:
+ temp_p->bios_address = 0xd0000;
+ break;
+ case 0x60:
+ temp_p->bios_address = 0xd8000;
+ break;
+ default:
+ break; /* can't get here */
+ }
+ break;
+
+ default: /* Won't get here. */
+ break;
+ }
+ if (aic7xxx_verbose & VERBOSE_PROBE2)
+ {
+ printk(KERN_INFO "aic7xxx: BIOS %sabled, IO Port 0x%lx, IRQ %d (%s)\n",
+ (temp_p->flags & AHC_USEDEFAULTS) ? "dis" : "en", temp_p->base,
+ temp_p->irq,
+ (temp_p->pause & IRQMS) ? "level sensitive" : "edge triggered");
+ printk(KERN_INFO "aic7xxx: Extended translation %sabled.\n",
+ (temp_p->flags & AHC_EXTEND_TRANS_A) ? "en" : "dis");
+ }
+
+ /*
+ * All the 7770 based chipsets have this bug
+ */
+ temp_p->bugs |= AHC_BUG_TMODE_WIDEODD;
+
+ /*
+ * Set the FIFO threshold and the bus off time.
+ */
+ hostconf = aic_inb(temp_p, HOSTCONF);
+ aic_outb(temp_p, hostconf & DFTHRSH, BUSSPD);
+ aic_outb(temp_p, (hostconf << 2) & BOFF, BUSTIME);
+ slot++;
+ found++;
+ }
+
+#endif /* defined(__i386__) || defined(__alpha__) */
+
+ /*
+ * Now, we re-order the probed devices by BIOS address and BUS class.
+ * In general, we follow this algorithm to make the adapters show up
+ * in the same order under linux that the computer finds them.
+ * 1: All VLB/EISA cards with BIOS_ENABLED first, according to BIOS
+ * address, going from lowest to highest.
+ * 2: All PCI controllers with BIOS_ENABLED next, according to BIOS
+ * address, going from lowest to highest.
+ * 3: Remaining VLB/EISA controllers going in slot order.
+ * 4: Remaining PCI controllers, going in PCI device order (reversable)
+ */
+
+ {
+ struct aic7xxx_host *sort_list[4] = { NULL, NULL, NULL, NULL };
+ struct aic7xxx_host *vlb, *pci;
+ struct aic7xxx_host *prev_p;
+ struct aic7xxx_host *p;
+ unsigned char left;
+
+ prev_p = vlb = pci = NULL;
+
+ temp_p = list_p;
+ while (temp_p != NULL)
+ {
+ switch(temp_p->chip & ~AHC_CHIPID_MASK)
+ {
+ case AHC_EISA:
+ case AHC_VL:
+ {
+ p = temp_p;
+ if (p->flags & AHC_BIOS_ENABLED)
+ vlb = sort_list[0];
+ else
+ vlb = sort_list[2];
+
+ if (vlb == NULL)
+ {
+ vlb = temp_p;
+ temp_p = temp_p->next;
+ vlb->next = NULL;
+ }
+ else
+ {
+ current_p = vlb;
+ prev_p = NULL;
+ while ( (current_p != NULL) &&
+ (current_p->bios_address < temp_p->bios_address))
+ {
+ prev_p = current_p;
+ current_p = current_p->next;
+ }
+ if (prev_p != NULL)
+ {
+ prev_p->next = temp_p;
+ temp_p = temp_p->next;
+ prev_p->next->next = current_p;
+ }
+ else
+ {
+ vlb = temp_p;
+ temp_p = temp_p->next;
+ vlb->next = current_p;
+ }
+ }
+
+ if (p->flags & AHC_BIOS_ENABLED)
+ sort_list[0] = vlb;
+ else
+ sort_list[2] = vlb;
+
+ break;
+ }
+ default: /* All PCI controllers fall through to default */
+ {
+
+ p = temp_p;
+ if (p->flags & AHC_BIOS_ENABLED)
+ pci = sort_list[1];
+ else
+ pci = sort_list[3];
+
+ if (pci == NULL)
+ {
+ pci = temp_p;
+ temp_p = temp_p->next;
+ pci->next = NULL;
+ }
+ else
+ {
+ current_p = pci;
+ prev_p = NULL;
+ if (!aic7xxx_reverse_scan)
+ {
+ while ( (current_p != NULL) &&
+ ( (PCI_SLOT(current_p->pci_device_fn) |
+ (current_p->pci_bus << 8)) <
+ (PCI_SLOT(temp_p->pci_device_fn) |
+ (temp_p->pci_bus << 8)) ) )
+ {
+ prev_p = current_p;
+ current_p = current_p->next;
+ }
+ }
+ else
+ {
+ while ( (current_p != NULL) &&
+ ( (PCI_SLOT(current_p->pci_device_fn) |
+ (current_p->pci_bus << 8)) >
+ (PCI_SLOT(temp_p->pci_device_fn) |
+ (temp_p->pci_bus << 8)) ) )
+ {
+ prev_p = current_p;
+ current_p = current_p->next;
+ }
+ }
+ /*
+ * Are we dealing with a 7895/6/7/9 where we need to sort the
+ * channels as well, if so, the bios_address values should
+ * be the same
+ */
+ if ( (current_p) && (temp_p->flags & AHC_MULTI_CHANNEL) &&
+ (temp_p->pci_bus == current_p->pci_bus) &&
+ (PCI_SLOT(temp_p->pci_device_fn) ==
+ PCI_SLOT(current_p->pci_device_fn)) )
+ {
+ if (temp_p->flags & AHC_CHNLB)
+ {
+ if ( !(temp_p->flags & AHC_CHANNEL_B_PRIMARY) )
+ {
+ prev_p = current_p;
+ current_p = current_p->next;
+ }
+ }
+ else
+ {
+ if (temp_p->flags & AHC_CHANNEL_B_PRIMARY)
+ {
+ prev_p = current_p;
+ current_p = current_p->next;
+ }
+ }
+ }
+ if (prev_p != NULL)
+ {
+ prev_p->next = temp_p;
+ temp_p = temp_p->next;
+ prev_p->next->next = current_p;
+ }
+ else
+ {
+ pci = temp_p;
+ temp_p = temp_p->next;
+ pci->next = current_p;
+ }
+ }
+
+ if (p->flags & AHC_BIOS_ENABLED)
+ sort_list[1] = pci;
+ else
+ sort_list[3] = pci;
+
+ break;
+ }
+ } /* End of switch(temp_p->type) */
+ } /* End of while (temp_p != NULL) */
+ /*
+ * At this point, the cards have been broken into 4 sorted lists, now
+ * we run through the lists in order and register each controller
+ */
+ {
+ int i;
+
+ left = found;
+ for (i=0; i<ARRAY_SIZE(sort_list); i++)
+ {
+ temp_p = sort_list[i];
+ while(temp_p != NULL)
+ {
+ template->name = board_names[temp_p->board_name_index];
+ p = aic7xxx_alloc(template, temp_p);
+ if (p != NULL)
+ {
+ p->instance = found - left;
+ if (aic7xxx_register(template, p, (--left)) == 0)
+ {
+ found--;
+ aic7xxx_release(p->host);
+ scsi_unregister(p->host);
+ }
+ else if (aic7xxx_dump_card)
+ {
+ pause_sequencer(p);
+ aic7xxx_print_card(p);
+ aic7xxx_print_scratch_ram(p);
+ unpause_sequencer(p, TRUE);
+ }
+ }
+ current_p = temp_p;
+ temp_p = (struct aic7xxx_host *)temp_p->next;
+ kfree(current_p);
+ }
+ }
+ }
+ }
+ return (found);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_buildscb
+ *
+ * Description:
+ * Build a SCB.
+ *-F*************************************************************************/
+static void
+aic7xxx_buildscb(struct aic7xxx_host *p, Scsi_Cmnd *cmd,
+ struct aic7xxx_scb *scb)
+{
+ unsigned short mask;
+ struct aic7xxx_hwscb *hscb;
+ struct aic_dev_data *aic_dev = cmd->device->hostdata;
+ struct scsi_device *sdptr = cmd->device;
+ unsigned char tindex = TARGET_INDEX(cmd);
+ struct request *req = cmd->request;
+
+ mask = (0x01 << tindex);
+ hscb = scb->hscb;
+
+ /*
+ * Setup the control byte if we need negotiation and have not
+ * already requested it.
+ */
+ hscb->control = 0;
+ scb->tag_action = 0;
+
+ if (p->discenable & mask)
+ {
+ hscb->control |= DISCENB;
+ /* We always force TEST_UNIT_READY to untagged */
+ if (cmd->cmnd[0] != TEST_UNIT_READY && sdptr->simple_tags)
+ {
+ if (req->flags & REQ_HARDBARRIER)
+ {
+ if(sdptr->ordered_tags)
+ {
+ hscb->control |= MSG_ORDERED_Q_TAG;
+ scb->tag_action = MSG_ORDERED_Q_TAG;
+ }
+ }
+ else
+ {
+ hscb->control |= MSG_SIMPLE_Q_TAG;
+ scb->tag_action = MSG_SIMPLE_Q_TAG;
+ }
+ }
+ }
+ if ( !(aic_dev->dtr_pending) &&
+ (aic_dev->needppr || aic_dev->needwdtr || aic_dev->needsdtr) &&
+ (aic_dev->flags & DEVICE_DTR_SCANNED) )
+ {
+ aic_dev->dtr_pending = 1;
+ scb->tag_action = 0;
+ hscb->control &= DISCENB;
+ hscb->control |= MK_MESSAGE;
+ if(aic_dev->needppr)
+ {
+ scb->flags |= SCB_MSGOUT_PPR;
+ }
+ else if(aic_dev->needwdtr)
+ {
+ scb->flags |= SCB_MSGOUT_WDTR;
+ }
+ else if(aic_dev->needsdtr)
+ {
+ scb->flags |= SCB_MSGOUT_SDTR;
+ }
+ scb->flags |= SCB_DTR_SCB;
+ }
+ hscb->target_channel_lun = ((cmd->device->id << 4) & 0xF0) |
+ ((cmd->device->channel & 0x01) << 3) | (cmd->device->lun & 0x07);
+
+ /*
+ * The interpretation of request_buffer and request_bufflen
+ * changes depending on whether or not use_sg is zero; a
+ * non-zero use_sg indicates the number of elements in the
+ * scatter-gather array.
+ */
+
+ /*
+ * XXX - this relies on the host data being stored in a
+ * little-endian format.
+ */
+ hscb->SCSI_cmd_length = cmd->cmd_len;
+ memcpy(scb->cmnd, cmd->cmnd, cmd->cmd_len);
+ hscb->SCSI_cmd_pointer = cpu_to_le32(SCB_DMA_ADDR(scb, scb->cmnd));
+
+ if (cmd->use_sg)
+ {
+ struct scatterlist *sg; /* Must be mid-level SCSI code scatterlist */
+
+ /*
+ * We must build an SG list in adapter format, as the kernel's SG list
+ * cannot be used directly because of data field size (__alpha__)
+ * differences and the kernel SG list uses virtual addresses where
+ * we need physical addresses.
+ */
+ int i, use_sg;
+
+ sg = (struct scatterlist *)cmd->request_buffer;
+ scb->sg_length = 0;
+ use_sg = pci_map_sg(p->pdev, sg, cmd->use_sg, scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ /*
+ * Copy the segments into the SG array. NOTE!!! - We used to
+ * have the first entry both in the data_pointer area and the first
+ * SG element. That has changed somewhat. We still have the first
+ * entry in both places, but now we download the address of
+ * scb->sg_list[1] instead of 0 to the sg pointer in the hscb.
+ */
+ for (i = 0; i < use_sg; i++)
+ {
+ unsigned int len = sg_dma_len(sg+i);
+ scb->sg_list[i].address = cpu_to_le32(sg_dma_address(sg+i));
+ scb->sg_list[i].length = cpu_to_le32(len);
+ scb->sg_length += len;
+ }
+ /* Copy the first SG into the data pointer area. */
+ hscb->data_pointer = scb->sg_list[0].address;
+ hscb->data_count = scb->sg_list[0].length;
+ scb->sg_count = i;
+ hscb->SG_segment_count = i;
+ hscb->SG_list_pointer = cpu_to_le32(SCB_DMA_ADDR(scb, &scb->sg_list[1]));
+ }
+ else
+ {
+ if (cmd->request_bufflen)
+ {
+ unsigned int address = pci_map_single(p->pdev, cmd->request_buffer,
+ cmd->request_bufflen,
+ scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ aic7xxx_mapping(cmd) = address;
+ scb->sg_list[0].address = cpu_to_le32(address);
+ scb->sg_list[0].length = cpu_to_le32(cmd->request_bufflen);
+ scb->sg_count = 1;
+ scb->sg_length = cmd->request_bufflen;
+ hscb->SG_segment_count = 1;
+ hscb->SG_list_pointer = cpu_to_le32(SCB_DMA_ADDR(scb, &scb->sg_list[0]));
+ hscb->data_count = scb->sg_list[0].length;
+ hscb->data_pointer = scb->sg_list[0].address;
+ }
+ else
+ {
+ scb->sg_count = 0;
+ scb->sg_length = 0;
+ hscb->SG_segment_count = 0;
+ hscb->SG_list_pointer = 0;
+ hscb->data_count = 0;
+ hscb->data_pointer = 0;
+ }
+ }
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_queue
+ *
+ * Description:
+ * Queue a SCB to the controller.
+ *-F*************************************************************************/
+static int
+aic7xxx_queue(Scsi_Cmnd *cmd, void (*fn)(Scsi_Cmnd *))
+{
+ struct aic7xxx_host *p;
+ struct aic7xxx_scb *scb;
+ struct aic_dev_data *aic_dev;
+
+ p = (struct aic7xxx_host *) cmd->device->host->hostdata;
+
+ aic_dev = cmd->device->hostdata;
+#ifdef AIC7XXX_VERBOSE_DEBUGGING
+ if (aic_dev->active_cmds > aic_dev->max_q_depth)
+ {
+ printk(WARN_LEAD "Commands queued exceeds queue "
+ "depth, active=%d\n",
+ p->host_no, CTL_OF_CMD(cmd),
+ aic_dev->active_cmds);
+ }
+#endif
+
+ scb = scbq_remove_head(&p->scb_data->free_scbs);
+ if (scb == NULL)
+ {
+ aic7xxx_allocate_scb(p);
+ scb = scbq_remove_head(&p->scb_data->free_scbs);
+ if(scb == NULL)
+ {
+ printk(WARN_LEAD "Couldn't get a free SCB.\n", p->host_no,
+ CTL_OF_CMD(cmd));
+ return 1;
+ }
+ }
+ scb->cmd = cmd;
+
+ /*
+ * Make sure the Scsi_Cmnd pointer is saved, the struct it points to
+ * is set up properly, and the parity error flag is reset, then send
+ * the SCB to the sequencer and watch the fun begin.
+ */
+ aic7xxx_position(cmd) = scb->hscb->tag;
+ cmd->scsi_done = fn;
+ cmd->result = DID_OK;
+ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ aic7xxx_error(cmd) = DID_OK;
+ aic7xxx_status(cmd) = 0;
+ cmd->host_scribble = NULL;
+
+ /*
+ * Construct the SCB beforehand, so the sequencer is
+ * paused a minimal amount of time.
+ */
+ aic7xxx_buildscb(p, cmd, scb);
+
+ scb->flags |= SCB_ACTIVE | SCB_WAITINGQ;
+
+ scbq_insert_tail(&p->waiting_scbs, scb);
+ aic7xxx_run_waiting_queues(p);
+ return (0);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_bus_device_reset
+ *
+ * Description:
+ * Abort or reset the current SCSI command(s). If the scb has not
+ * previously been aborted, then we attempt to send a BUS_DEVICE_RESET
+ * message to the target. If the scb has previously been unsuccessfully
+ * aborted, then we will reset the channel and have all devices renegotiate.
+ * Returns an enumerated type that indicates the status of the operation.
+ *-F*************************************************************************/
+static int
+aic7xxx_bus_device_reset(Scsi_Cmnd *cmd)
+{
+ struct aic7xxx_host *p;
+ struct aic7xxx_scb *scb;
+ struct aic7xxx_hwscb *hscb;
+ int channel;
+ unsigned char saved_scbptr, lastphase;
+ unsigned char hscb_index;
+ int disconnected;
+ struct aic_dev_data *aic_dev;
+
+ if(cmd == NULL)
+ {
+ printk(KERN_ERR "aic7xxx_bus_device_reset: called with NULL cmd!\n");
+ return FAILED;
+ }
+ p = (struct aic7xxx_host *)cmd->device->host->hostdata;
+ aic_dev = AIC_DEV(cmd);
+ if(aic7xxx_position(cmd) < p->scb_data->numscbs)
+ scb = (p->scb_data->scb_array[aic7xxx_position(cmd)]);
+ else
+ return FAILED;
+
+ hscb = scb->hscb;
+
+ aic7xxx_isr(p->irq, (void *)p, NULL);
+ aic7xxx_done_cmds_complete(p);
+ /* If the command was already complete or just completed, then we didn't
+ * do a reset, return FAILED */
+ if(!(scb->flags & SCB_ACTIVE))
+ return FAILED;
+
+ pause_sequencer(p);
+ lastphase = aic_inb(p, LASTPHASE);
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ {
+ printk(INFO_LEAD "Bus Device reset, scb flags 0x%x, ",
+ p->host_no, CTL_OF_SCB(scb), scb->flags);
+ switch (lastphase)
+ {
+ case P_DATAOUT:
+ printk("Data-Out phase\n");
+ break;
+ case P_DATAIN:
+ printk("Data-In phase\n");
+ break;
+ case P_COMMAND:
+ printk("Command phase\n");
+ break;
+ case P_MESGOUT:
+ printk("Message-Out phase\n");
+ break;
+ case P_STATUS:
+ printk("Status phase\n");
+ break;
+ case P_MESGIN:
+ printk("Message-In phase\n");
+ break;
+ default:
+ /*
+ * We're not in a valid phase, so assume we're idle.
+ */
+ printk("while idle, LASTPHASE = 0x%x\n", lastphase);
+ break;
+ }
+ printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 "
+ "0x%x\n", p->host_no, CTL_OF_SCB(scb),
+ aic_inb(p, SCSISIGI),
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, SSTAT0), aic_inb(p, SSTAT1));
+ printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n", p->host_no,
+ CTL_OF_SCB(scb),
+ (p->features & AHC_ULTRA2) ? aic_inb(p, SG_CACHEPTR) : 0,
+ aic_inb(p, SSTAT2),
+ aic_inb(p, STCNT + 2) << 16 | aic_inb(p, STCNT + 1) << 8 |
+ aic_inb(p, STCNT));
+ }
+
+ channel = cmd->device->channel;
+
+ /*
+ * Send a Device Reset Message:
+ * The target that is holding up the bus may not be the same as
+ * the one that triggered this timeout (different commands have
+ * different timeout lengths). Our strategy here is to queue an
+ * abort message to the timed out target if it is disconnected.
+ * Otherwise, if we have an active target we stuff the message buffer
+ * with an abort message and assert ATN in the hopes that the target
+ * will let go of the bus and go to the mesgout phase. If this
+ * fails, we'll get another timeout a few seconds later which will
+ * attempt a bus reset.
+ */
+ saved_scbptr = aic_inb(p, SCBPTR);
+ disconnected = FALSE;
+
+ if (lastphase != P_BUSFREE)
+ {
+ if (aic_inb(p, SCB_TAG) >= p->scb_data->numscbs)
+ {
+ printk(WARN_LEAD "Invalid SCB ID %d is active, "
+ "SCB flags = 0x%x.\n", p->host_no,
+ CTL_OF_CMD(cmd), scb->hscb->tag, scb->flags);
+ unpause_sequencer(p, FALSE);
+ return FAILED;
+ }
+ if (scb->hscb->tag == aic_inb(p, SCB_TAG))
+ {
+ if ( (lastphase == P_MESGOUT) || (lastphase == P_MESGIN) )
+ {
+ printk(WARN_LEAD "Device reset, Message buffer "
+ "in use\n", p->host_no, CTL_OF_SCB(scb));
+ unpause_sequencer(p, FALSE);
+ return FAILED;
+ }
+
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Device reset message in "
+ "message buffer\n", p->host_no, CTL_OF_SCB(scb));
+ scb->flags |= SCB_RESET | SCB_DEVICE_RESET;
+ aic7xxx_error(cmd) = DID_RESET;
+ aic_dev->flags |= BUS_DEVICE_RESET_PENDING;
+ /* Send the abort message to the active SCB. */
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, lastphase | ATNO, SCSISIGO);
+ unpause_sequencer(p, FALSE);
+ spin_unlock_irq(p->host->host_lock);
+ ssleep(1);
+ spin_lock_irq(p->host->host_lock);
+ if(aic_dev->flags & BUS_DEVICE_RESET_PENDING)
+ return FAILED;
+ else
+ return SUCCESS;
+ }
+ } /* if (last_phase != P_BUSFREE).....indicates we are idle and can work */
+ /*
+ * Simply set the MK_MESSAGE flag and the SEQINT handler will do
+ * the rest on a reconnect/connect.
+ */
+ scb->hscb->control |= MK_MESSAGE;
+ scb->flags |= SCB_RESET | SCB_DEVICE_RESET;
+ aic_dev->flags |= BUS_DEVICE_RESET_PENDING;
+ /*
+ * Check to see if the command is on the qinfifo. If it is, then we will
+ * not need to queue the command again since the card should start it soon
+ */
+ if (aic7xxx_search_qinfifo(p, cmd->device->channel, cmd->device->id, cmd->device->lun, hscb->tag,
+ 0, TRUE, NULL) == 0)
+ {
+ disconnected = TRUE;
+ if ((hscb_index = aic7xxx_find_scb(p, scb)) != SCB_LIST_NULL)
+ {
+ unsigned char scb_control;
+
+ aic_outb(p, hscb_index, SCBPTR);
+ scb_control = aic_inb(p, SCB_CONTROL);
+ /*
+ * If the DISCONNECTED bit is not set in SCB_CONTROL, then we are
+ * actually on the waiting list, not disconnected, and we don't
+ * need to requeue the command.
+ */
+ disconnected = (scb_control & DISCONNECTED);
+ aic_outb(p, scb_control | MK_MESSAGE, SCB_CONTROL);
+ }
+ if (disconnected)
+ {
+ /*
+ * Actually requeue this SCB in case we can select the
+ * device before it reconnects. This can result in the command
+ * being on the qinfifo twice, but we don't care because it will
+ * all get cleaned up if/when the reset takes place.
+ */
+ if (aic7xxx_verbose & VERBOSE_RESET_PROCESS)
+ printk(INFO_LEAD "Queueing device reset command.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ p->qinfifo[p->qinfifonext++] = scb->hscb->tag;
+ if (p->features & AHC_QUEUE_REGS)
+ aic_outb(p, p->qinfifonext, HNSCB_QOFF);
+ else
+ aic_outb(p, p->qinfifonext, KERNEL_QINPOS);
+ scb->flags |= SCB_QUEUED_ABORT;
+ }
+ }
+ aic_outb(p, saved_scbptr, SCBPTR);
+ unpause_sequencer(p, FALSE);
+ spin_unlock_irq(p->host->host_lock);
+ msleep(1000/4);
+ spin_lock_irq(p->host->host_lock);
+ if(aic_dev->flags & BUS_DEVICE_RESET_PENDING)
+ return FAILED;
+ else
+ return SUCCESS;
+}
+
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_panic_abort
+ *
+ * Description:
+ * Abort the current SCSI command(s).
+ *-F*************************************************************************/
+static void
+aic7xxx_panic_abort(struct aic7xxx_host *p, Scsi_Cmnd *cmd)
+{
+
+ printk("aic7xxx driver version %s\n", AIC7XXX_C_VERSION);
+ printk("Controller type:\n %s\n", board_names[p->board_name_index]);
+ printk("p->flags=0x%lx, p->chip=0x%x, p->features=0x%x, "
+ "sequencer %s paused\n",
+ p->flags, p->chip, p->features,
+ (aic_inb(p, HCNTRL) & PAUSE) ? "is" : "isn't" );
+ pause_sequencer(p);
+ disable_irq(p->irq);
+ aic7xxx_print_card(p);
+ aic7xxx_print_scratch_ram(p);
+ spin_unlock_irq(p->host->host_lock);
+ for(;;) barrier();
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_abort
+ *
+ * Description:
+ * Abort the current SCSI command(s).
+ *-F*************************************************************************/
+static int
+aic7xxx_abort(Scsi_Cmnd *cmd)
+{
+ struct aic7xxx_scb *scb = NULL;
+ struct aic7xxx_host *p;
+ int found=0, disconnected;
+ unsigned char saved_hscbptr, hscbptr, scb_control;
+ struct aic_dev_data *aic_dev;
+
+ if(cmd == NULL)
+ {
+ printk(KERN_ERR "aic7xxx_abort: called with NULL cmd!\n");
+ return FAILED;
+ }
+ p = (struct aic7xxx_host *)cmd->device->host->hostdata;
+ aic_dev = AIC_DEV(cmd);
+ if(aic7xxx_position(cmd) < p->scb_data->numscbs)
+ scb = (p->scb_data->scb_array[aic7xxx_position(cmd)]);
+ else
+ return FAILED;
+
+ aic7xxx_isr(p->irq, (void *)p, NULL);
+ aic7xxx_done_cmds_complete(p);
+ /* If the command was already complete or just completed, then we didn't
+ * do a reset, return FAILED */
+ if(!(scb->flags & SCB_ACTIVE))
+ return FAILED;
+
+ pause_sequencer(p);
+
+ /*
+ * I added a new config option to the driver: "panic_on_abort" that will
+ * cause the driver to panic and the machine to stop on the first abort
+ * or reset call into the driver. At that point, it prints out a lot of
+ * useful information for me which I can then use to try and debug the
+ * problem. Simply enable the boot time prompt in order to activate this
+ * code.
+ */
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, cmd);
+
+ if (aic7xxx_verbose & VERBOSE_ABORT)
+ {
+ printk(INFO_LEAD "Aborting scb %d, flags 0x%x, SEQADDR 0x%x, LASTPHASE "
+ "0x%x\n",
+ p->host_no, CTL_OF_SCB(scb), scb->hscb->tag, scb->flags,
+ aic_inb(p, SEQADDR0) | (aic_inb(p, SEQADDR1) << 8),
+ aic_inb(p, LASTPHASE));
+ printk(INFO_LEAD "SG_CACHEPTR 0x%x, SG_COUNT %d, SCSISIGI 0x%x\n",
+ p->host_no, CTL_OF_SCB(scb), (p->features & AHC_ULTRA2) ?
+ aic_inb(p, SG_CACHEPTR) : 0, aic_inb(p, SG_COUNT),
+ aic_inb(p, SCSISIGI));
+ printk(INFO_LEAD "SSTAT0 0x%x, SSTAT1 0x%x, SSTAT2 0x%x\n",
+ p->host_no, CTL_OF_SCB(scb), aic_inb(p, SSTAT0),
+ aic_inb(p, SSTAT1), aic_inb(p, SSTAT2));
+ }
+
+ if (scb->flags & SCB_WAITINGQ)
+ {
+ if (aic7xxx_verbose & VERBOSE_ABORT_PROCESS)
+ printk(INFO_LEAD "SCB found on waiting list and "
+ "aborted.\n", p->host_no, CTL_OF_SCB(scb));
+ scbq_remove(&p->waiting_scbs, scb);
+ scbq_remove(&aic_dev->delayed_scbs, scb);
+ aic_dev->active_cmds++;
+ p->activescbs++;
+ scb->flags &= ~(SCB_WAITINGQ | SCB_ACTIVE);
+ scb->flags |= SCB_ABORT | SCB_QUEUED_FOR_DONE;
+ goto success;
+ }
+
+/*
+ * We just checked the waiting_q, now for the QINFIFO
+ */
+ if ( ((found = aic7xxx_search_qinfifo(p, cmd->device->id, cmd->device->channel,
+ cmd->device->lun, scb->hscb->tag, SCB_ABORT | SCB_QUEUED_FOR_DONE,
+ FALSE, NULL)) != 0) &&
+ (aic7xxx_verbose & VERBOSE_ABORT_PROCESS))
+ {
+ printk(INFO_LEAD "SCB found in QINFIFO and aborted.\n", p->host_no,
+ CTL_OF_SCB(scb));
+ goto success;
+ }
+
+/*
+ * QINFIFO, waitingq, completeq done. Next, check WAITING_SCB list in card
+ */
+
+ saved_hscbptr = aic_inb(p, SCBPTR);
+ if ((hscbptr = aic7xxx_find_scb(p, scb)) != SCB_LIST_NULL)
+ {
+ aic_outb(p, hscbptr, SCBPTR);
+ scb_control = aic_inb(p, SCB_CONTROL);
+ disconnected = scb_control & DISCONNECTED;
+ /*
+ * If the DISCONNECTED bit is not set in SCB_CONTROL, then we are
+ * either currently active or on the waiting list.
+ */
+ if(!disconnected && aic_inb(p, LASTPHASE) == P_BUSFREE) {
+ if (aic7xxx_verbose & VERBOSE_ABORT_PROCESS)
+ printk(INFO_LEAD "SCB found on hardware waiting"
+ " list and aborted.\n", p->host_no, CTL_OF_SCB(scb));
+ /* If we are the only waiting command, stop the selection engine */
+ if (aic_inb(p, WAITING_SCBH) == hscbptr && aic_inb(p, SCB_NEXT) ==
+ SCB_LIST_NULL)
+ {
+ aic_outb(p, aic_inb(p, SCSISEQ) & ~ENSELO, SCSISEQ);
+ aic_outb(p, CLRSELTIMEO, CLRSINT1);
+ aic_outb(p, SCB_LIST_NULL, WAITING_SCBH);
+ }
+ else
+ {
+ unsigned char prev, next;
+ prev = SCB_LIST_NULL;
+ next = aic_inb(p, WAITING_SCBH);
+ while(next != SCB_LIST_NULL)
+ {
+ aic_outb(p, next, SCBPTR);
+ if (next == hscbptr)
+ {
+ next = aic_inb(p, SCB_NEXT);
+ if (prev != SCB_LIST_NULL)
+ {
+ aic_outb(p, prev, SCBPTR);
+ aic_outb(p, next, SCB_NEXT);
+ }
+ else
+ aic_outb(p, next, WAITING_SCBH);
+ aic_outb(p, hscbptr, SCBPTR);
+ next = SCB_LIST_NULL;
+ }
+ else
+ {
+ prev = next;
+ next = aic_inb(p, SCB_NEXT);
+ }
+ }
+ }
+ aic_outb(p, SCB_LIST_NULL, SCB_TAG);
+ aic_outb(p, 0, SCB_CONTROL);
+ aic7xxx_add_curscb_to_free_list(p);
+ scb->flags = SCB_ABORT | SCB_QUEUED_FOR_DONE;
+ goto success;
+ }
+ else if (!disconnected)
+ {
+ /*
+ * We are the currently active command
+ */
+ if((aic_inb(p, LASTPHASE) == P_MESGIN) ||
+ (aic_inb(p, LASTPHASE) == P_MESGOUT))
+ {
+ /*
+ * Message buffer busy, unable to abort
+ */
+ printk(INFO_LEAD "message buffer busy, unable to abort.\n",
+ p->host_no, CTL_OF_SCB(scb));
+ unpause_sequencer(p, FALSE);
+ return FAILED;
+ }
+ /* Fallthrough to below, set ATNO after we set SCB_CONTROL */
+ }
+ aic_outb(p, scb_control | MK_MESSAGE, SCB_CONTROL);
+ if(!disconnected)
+ {
+ aic_outb(p, HOST_MSG, MSG_OUT);
+ aic_outb(p, aic_inb(p, SCSISIGI) | ATNO, SCSISIGO);
+ }
+ aic_outb(p, saved_hscbptr, SCBPTR);
+ }
+ else
+ {
+ /*
+ * The scb isn't in the card at all and it is active and it isn't in
+ * any of the queues, so it must be disconnected and paged out. Fall
+ * through to the code below.
+ */
+ disconnected = 1;
+ }
+
+ p->flags |= AHC_ABORT_PENDING;
+ scb->flags |= SCB_QUEUED_ABORT | SCB_ABORT | SCB_RECOVERY_SCB;
+ scb->hscb->control |= MK_MESSAGE;
+ if(disconnected)
+ {
+ if (aic7xxx_verbose & VERBOSE_ABORT_PROCESS)
+ printk(INFO_LEAD "SCB disconnected. Queueing Abort"
+ " SCB.\n", p->host_no, CTL_OF_SCB(scb));
+ p->qinfifo[p->qinfifonext++] = scb->hscb->tag;
+ if (p->features & AHC_QUEUE_REGS)
+ aic_outb(p, p->qinfifonext, HNSCB_QOFF);
+ else
+ aic_outb(p, p->qinfifonext, KERNEL_QINPOS);
+ }
+ unpause_sequencer(p, FALSE);
+ spin_unlock_irq(p->host->host_lock);
+ msleep(1000/4);
+ spin_lock_irq(p->host->host_lock);
+ if (p->flags & AHC_ABORT_PENDING)
+ {
+ if (aic7xxx_verbose & VERBOSE_ABORT_RETURN)
+ printk(INFO_LEAD "Abort never delivered, returning FAILED\n", p->host_no,
+ CTL_OF_CMD(cmd));
+ p->flags &= ~AHC_ABORT_PENDING;
+ return FAILED;
+ }
+ if (aic7xxx_verbose & VERBOSE_ABORT_RETURN)
+ printk(INFO_LEAD "Abort successful.\n", p->host_no, CTL_OF_CMD(cmd));
+ return SUCCESS;
+
+success:
+ if (aic7xxx_verbose & VERBOSE_ABORT_RETURN)
+ printk(INFO_LEAD "Abort successful.\n", p->host_no, CTL_OF_CMD(cmd));
+ aic7xxx_run_done_queue(p, TRUE);
+ unpause_sequencer(p, FALSE);
+ return SUCCESS;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_reset
+ *
+ * Description:
+ * Resetting the bus always succeeds - is has to, otherwise the
+ * kernel will panic! Try a surgical technique - sending a BUS
+ * DEVICE RESET message - on the offending target before pulling
+ * the SCSI bus reset line.
+ *-F*************************************************************************/
+static int
+aic7xxx_reset(Scsi_Cmnd *cmd)
+{
+ struct aic7xxx_scb *scb;
+ struct aic7xxx_host *p;
+ struct aic_dev_data *aic_dev;
+
+ p = (struct aic7xxx_host *) cmd->device->host->hostdata;
+ aic_dev = AIC_DEV(cmd);
+ if(aic7xxx_position(cmd) < p->scb_data->numscbs)
+ {
+ scb = (p->scb_data->scb_array[aic7xxx_position(cmd)]);
+ if (scb->cmd != cmd)
+ scb = NULL;
+ }
+ else
+ {
+ scb = NULL;
+ }
+
+ /*
+ * I added a new config option to the driver: "panic_on_abort" that will
+ * cause the driver to panic and the machine to stop on the first abort
+ * or reset call into the driver. At that point, it prints out a lot of
+ * useful information for me which I can then use to try and debug the
+ * problem. Simply enable the boot time prompt in order to activate this
+ * code.
+ */
+ if (aic7xxx_panic_on_abort)
+ aic7xxx_panic_abort(p, cmd);
+
+ pause_sequencer(p);
+
+ while((aic_inb(p, INTSTAT) & INT_PEND) && !(p->flags & AHC_IN_ISR))
+ {
+ aic7xxx_isr(p->irq, p, (void *)NULL );
+ pause_sequencer(p);
+ }
+ aic7xxx_done_cmds_complete(p);
+
+ if(scb && (scb->cmd == NULL))
+ {
+ /*
+ * We just completed the command when we ran the isr stuff, so we no
+ * longer have it.
+ */
+ unpause_sequencer(p, FALSE);
+ return SUCCESS;
+ }
+
+/*
+ * By this point, we want to already know what we are going to do and
+ * only have the following code implement our course of action.
+ */
+ aic7xxx_reset_channel(p, cmd->device->channel, TRUE);
+ if (p->features & AHC_TWIN)
+ {
+ aic7xxx_reset_channel(p, cmd->device->channel ^ 0x01, TRUE);
+ restart_sequencer(p);
+ }
+ aic_outb(p, aic_inb(p, SIMODE1) & ~(ENREQINIT|ENBUSFREE), SIMODE1);
+ aic7xxx_clear_intstat(p);
+ p->flags &= ~AHC_HANDLING_REQINITS;
+ p->msg_type = MSG_TYPE_NONE;
+ p->msg_index = 0;
+ p->msg_len = 0;
+ aic7xxx_run_done_queue(p, TRUE);
+ unpause_sequencer(p, FALSE);
+ spin_unlock_irq(p->host->host_lock);
+ ssleep(2);
+ spin_lock_irq(p->host->host_lock);
+ return SUCCESS;
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_biosparam
+ *
+ * Description:
+ * Return the disk geometry for the given SCSI device.
+ *
+ * Note:
+ * This function is broken for today's really large drives and needs
+ * fixed.
+ *-F*************************************************************************/
+static int
+aic7xxx_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ sector_t heads, sectors, cylinders;
+ int ret;
+ struct aic7xxx_host *p;
+ unsigned char *buf;
+
+ p = (struct aic7xxx_host *) sdev->host->hostdata;
+ buf = scsi_bios_ptable(bdev);
+
+ if ( buf )
+ {
+ ret = scsi_partsize(buf, capacity, &geom[2], &geom[0], &geom[1]);
+ kfree(buf);
+ if ( ret != -1 )
+ return(ret);
+ }
+
+ heads = 64;
+ sectors = 32;
+ cylinders = capacity >> 11;
+
+ if ((p->flags & AHC_EXTEND_TRANS_A) && (cylinders > 1024))
+ {
+ heads = 255;
+ sectors = 63;
+ cylinders = capacity >> 14;
+ if(capacity > (65535 * heads * sectors))
+ cylinders = 65535;
+ else
+ cylinders = ((unsigned int)capacity) / (unsigned int)(heads * sectors);
+ }
+
+ geom[0] = (int)heads;
+ geom[1] = (int)sectors;
+ geom[2] = (int)cylinders;
+
+ return (0);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_release
+ *
+ * Description:
+ * Free the passed in Scsi_Host memory structures prior to unloading the
+ * module.
+ *-F*************************************************************************/
+static int
+aic7xxx_release(struct Scsi_Host *host)
+{
+ struct aic7xxx_host *p = (struct aic7xxx_host *) host->hostdata;
+ struct aic7xxx_host *next, *prev;
+
+ if(p->irq)
+ free_irq(p->irq, p);
+#ifdef MMAPIO
+ if(p->maddr)
+ {
+ iounmap(p->maddr);
+ }
+#endif /* MMAPIO */
+ if(!p->pdev)
+ release_region(p->base, MAXREG - MINREG);
+#ifdef CONFIG_PCI
+ else
+ pci_release_regions(p->pdev);
+#endif
+ prev = NULL;
+ next = first_aic7xxx;
+ while(next != NULL)
+ {
+ if(next == p)
+ {
+ if(prev == NULL)
+ first_aic7xxx = next->next;
+ else
+ prev->next = next->next;
+ }
+ else
+ {
+ prev = next;
+ }
+ next = next->next;
+ }
+ aic7xxx_free(p);
+ return(0);
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_print_card
+ *
+ * Description:
+ * Print out all of the control registers on the card
+ *
+ * NOTE: This function is not yet safe for use on the VLB and EISA
+ * controllers, so it isn't used on those controllers at all.
+ *-F*************************************************************************/
+static void
+aic7xxx_print_card(struct aic7xxx_host *p)
+{
+ int i, j, k, chip;
+ static struct register_ranges {
+ int num_ranges;
+ int range_val[32];
+ } cards_ds[] = {
+ { 0, {0,} }, /* none */
+ {10, {0x00, 0x05, 0x08, 0x11, 0x18, 0x19, 0x1f, 0x1f, 0x60, 0x60, /*7771*/
+ 0x62, 0x66, 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9b, 0x9f} },
+ { 9, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7850*/
+ 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9f} },
+ { 9, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7860*/
+ 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9f} },
+ {10, {0x00, 0x05, 0x08, 0x11, 0x18, 0x19, 0x1c, 0x1f, 0x60, 0x60, /*7870*/
+ 0x62, 0x66, 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9f} },
+ {10, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1a, 0x1c, 0x1f, 0x60, 0x60, /*7880*/
+ 0x62, 0x66, 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9f} },
+ {16, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7890*/
+ 0x84, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9a, 0x9f, 0x9f,
+ 0xe0, 0xf1, 0xf4, 0xf4, 0xf6, 0xf6, 0xf8, 0xf8, 0xfa, 0xfc,
+ 0xfe, 0xff} },
+ {12, {0x00, 0x05, 0x08, 0x11, 0x18, 0x19, 0x1b, 0x1f, 0x60, 0x60, /*7895*/
+ 0x62, 0x66, 0x80, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9a,
+ 0x9f, 0x9f, 0xe0, 0xf1} },
+ {16, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7896*/
+ 0x84, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9a, 0x9f, 0x9f,
+ 0xe0, 0xf1, 0xf4, 0xf4, 0xf6, 0xf6, 0xf8, 0xf8, 0xfa, 0xfc,
+ 0xfe, 0xff} },
+ {12, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7892*/
+ 0x84, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9a, 0x9c, 0x9f,
+ 0xe0, 0xf1, 0xf4, 0xfc} },
+ {12, {0x00, 0x05, 0x08, 0x11, 0x18, 0x1f, 0x60, 0x60, 0x62, 0x66, /*7899*/
+ 0x84, 0x8e, 0x90, 0x95, 0x97, 0x97, 0x9a, 0x9a, 0x9c, 0x9f,
+ 0xe0, 0xf1, 0xf4, 0xfc} },
+ };
+ chip = p->chip & AHC_CHIPID_MASK;
+ printk("%s at ",
+ board_names[p->board_name_index]);
+ switch(p->chip & ~AHC_CHIPID_MASK)
+ {
+ case AHC_VL:
+ printk("VLB Slot %d.\n", p->pci_device_fn);
+ break;
+ case AHC_EISA:
+ printk("EISA Slot %d.\n", p->pci_device_fn);
+ break;
+ case AHC_PCI:
+ default:
+ printk("PCI %d/%d/%d.\n", p->pci_bus, PCI_SLOT(p->pci_device_fn),
+ PCI_FUNC(p->pci_device_fn));
+ break;
+ }
+
+ /*
+ * the registers on the card....
+ */
+ printk("Card Dump:\n");
+ k = 0;
+ for(i=0; i<cards_ds[chip].num_ranges; i++)
+ {
+ for(j = cards_ds[chip].range_val[ i * 2 ];
+ j <= cards_ds[chip].range_val[ i * 2 + 1 ] ;
+ j++)
+ {
+ printk("%02x:%02x ", j, aic_inb(p, j));
+ if(++k == 13)
+ {
+ printk("\n");
+ k=0;
+ }
+ }
+ }
+ if(k != 0)
+ printk("\n");
+
+ /*
+ * If this was an Ultra2 controller, then we just hosed the card in terms
+ * of the QUEUE REGS. This function is only called at init time or by
+ * the panic_abort function, so it's safe to assume a generic init time
+ * setting here
+ */
+
+ if(p->features & AHC_QUEUE_REGS)
+ {
+ aic_outb(p, 0, SDSCB_QOFF);
+ aic_outb(p, 0, SNSCB_QOFF);
+ aic_outb(p, 0, HNSCB_QOFF);
+ }
+
+}
+
+/*+F*************************************************************************
+ * Function:
+ * aic7xxx_print_scratch_ram
+ *
+ * Description:
+ * Print out the scratch RAM values on the card.
+ *-F*************************************************************************/
+static void
+aic7xxx_print_scratch_ram(struct aic7xxx_host *p)
+{
+ int i, k;
+
+ k = 0;
+ printk("Scratch RAM:\n");
+ for(i = SRAM_BASE; i < SEQCTL; i++)
+ {
+ printk("%02x:%02x ", i, aic_inb(p, i));
+ if(++k == 13)
+ {
+ printk("\n");
+ k=0;
+ }
+ }
+ if (p->features & AHC_MORE_SRAM)
+ {
+ for(i = TARG_OFFSET; i < 0x80; i++)
+ {
+ printk("%02x:%02x ", i, aic_inb(p, i));
+ if(++k == 13)
+ {
+ printk("\n");
+ k=0;
+ }
+ }
+ }
+ printk("\n");
+}
+
+
+#include "aic7xxx_old/aic7xxx_proc.c"
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(AIC7XXX_H_VERSION);
+
+
+static Scsi_Host_Template driver_template = {
+ .proc_info = aic7xxx_proc_info,
+ .detect = aic7xxx_detect,
+ .release = aic7xxx_release,
+ .info = aic7xxx_info,
+ .queuecommand = aic7xxx_queue,
+ .slave_alloc = aic7xxx_slave_alloc,
+ .slave_configure = aic7xxx_slave_configure,
+ .slave_destroy = aic7xxx_slave_destroy,
+ .bios_param = aic7xxx_biosparam,
+ .eh_abort_handler = aic7xxx_abort,
+ .eh_device_reset_handler = aic7xxx_bus_device_reset,
+ .eh_host_reset_handler = aic7xxx_reset,
+ .can_queue = 255,
+ .this_id = -1,
+ .max_sectors = 2048,
+ .cmd_per_lun = 3,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+#include "scsi_module.c"
+
+/*
+ * Overrides for Emacs so that we almost follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only. This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 2
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -2
+ * c-argdecl-indent: 2
+ * c-label-offset: -2
+ * c-continued-statement-offset: 2
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
OpenPOWER on IntegriCloud