diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aic7xxx/aic7xxx_93cx6.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx_93cx6.c')
-rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx_93cx6.c | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx_93cx6.c b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c new file mode 100644 index 0000000..468d612 --- /dev/null +++ b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c @@ -0,0 +1,306 @@ +/* + * Interface for the 93C66/56/46/26/06 serial eeprom parts. + * + * Copyright (c) 1995, 1996 Daniel M. Eischen + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#17 $ + * + * $FreeBSD$ + */ + +/* + * The instruction set of the 93C66/56/46/26/06 chips are as follows: + * + * Start OP * + * Function Bit Code Address** Data Description + * ------------------------------------------------------------------- + * READ 1 10 A5 - A0 Reads data stored in memory, + * starting at specified address + * EWEN 1 00 11XXXX Write enable must precede + * all programming modes + * ERASE 1 11 A5 - A0 Erase register A5A4A3A2A1A0 + * WRITE 1 01 A5 - A0 D15 - D0 Writes register + * ERAL 1 00 10XXXX Erase all registers + * WRAL 1 00 01XXXX D15 - D0 Writes to all registers + * EWDS 1 00 00XXXX Disables all programming + * instructions + * *Note: A value of X for address is a don't care condition. + * **Note: There are 8 address bits for the 93C56/66 chips unlike + * the 93C46/26/06 chips which have 6 address bits. + * + * The 93C46 has a four wire interface: clock, chip select, data in, and + * data out. In order to perform one of the above functions, you need + * to enable the chip select for a clock period (typically a minimum of + * 1 usec, with the clock high and low a minimum of 750 and 250 nsec + * respectively). While the chip select remains high, you can clock in + * the instructions (above) starting with the start bit, followed by the + * OP code, Address, and Data (if needed). For the READ instruction, the + * requested 16-bit register contents is read from the data out line but + * is preceded by an initial zero (leading 0, followed by 16-bits, MSB + * first). The clock cycling from low to high initiates the next data + * bit to be sent from the chip. + * + */ + +#ifdef __linux__ +#include "aic7xxx_osm.h" +#include "aic7xxx_inline.h" +#include "aic7xxx_93cx6.h" +#else +#include <dev/aic7xxx/aic7xxx_osm.h> +#include <dev/aic7xxx/aic7xxx_inline.h> +#include <dev/aic7xxx/aic7xxx_93cx6.h> +#endif + +/* + * Right now, we only have to read the SEEPROM. But we make it easier to + * add other 93Cx6 functions. + */ +static struct seeprom_cmd { + uint8_t len; + uint8_t bits[9]; +} seeprom_read = {3, {1, 1, 0}}; + +static struct seeprom_cmd seeprom_ewen = {9, {1, 0, 0, 1, 1, 0, 0, 0, 0}}; +static struct seeprom_cmd seeprom_ewds = {9, {1, 0, 0, 0, 0, 0, 0, 0, 0}}; +static struct seeprom_cmd seeprom_write = {3, {1, 0, 1}}; + +/* + * Wait for the SEERDY to go high; about 800 ns. + */ +#define CLOCK_PULSE(sd, rdy) \ + while ((SEEPROM_STATUS_INB(sd) & rdy) == 0) { \ + ; /* Do nothing */ \ + } \ + (void)SEEPROM_INB(sd); /* Clear clock */ + +/* + * Send a START condition and the given command + */ +static void +send_seeprom_cmd(struct seeprom_descriptor *sd, struct seeprom_cmd *cmd) +{ + uint8_t temp; + int i = 0; + + /* Send chip select for one clock cycle. */ + temp = sd->sd_MS ^ sd->sd_CS; + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + + for (i = 0; i < cmd->len; i++) { + if (cmd->bits[i] != 0) + temp ^= sd->sd_DO; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + if (cmd->bits[i] != 0) + temp ^= sd->sd_DO; + } +} + +/* + * Clear CS put the chip in the reset state, where it can wait for new commands. + */ +static void +reset_seeprom(struct seeprom_descriptor *sd) +{ + uint8_t temp; + + temp = sd->sd_MS; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); +} + +/* + * Read the serial EEPROM and returns 1 if successful and 0 if + * not successful. + */ +int +ahc_read_seeprom(struct seeprom_descriptor *sd, uint16_t *buf, + u_int start_addr, u_int count) +{ + int i = 0; + u_int k = 0; + uint16_t v; + uint8_t temp; + + /* + * Read the requested registers of the seeprom. The loop + * will range from 0 to count-1. + */ + for (k = start_addr; k < count + start_addr; k++) { + /* + * Now we're ready to send the read command followed by the + * address of the 16-bit register we want to read. + */ + send_seeprom_cmd(sd, &seeprom_read); + + /* Send the 6 or 8 bit address (MSB first, LSB last). */ + temp = sd->sd_MS ^ sd->sd_CS; + for (i = (sd->sd_chip - 1); i >= 0; i--) { + if ((k & (1 << i)) != 0) + temp ^= sd->sd_DO; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + if ((k & (1 << i)) != 0) + temp ^= sd->sd_DO; + } + + /* + * Now read the 16 bit register. An initial 0 precedes the + * register contents which begins with bit 15 (MSB) and ends + * with bit 0 (LSB). The initial 0 will be shifted off the + * top of our word as we let the loop run from 0 to 16. + */ + v = 0; + for (i = 16; i >= 0; i--) { + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + v <<= 1; + if (SEEPROM_DATA_INB(sd) & sd->sd_DI) + v |= 1; + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + } + + buf[k - start_addr] = v; + + /* Reset the chip select for the next command cycle. */ + reset_seeprom(sd); + } +#ifdef AHC_DUMP_EEPROM + printf("\nSerial EEPROM:\n\t"); + for (k = 0; k < count; k = k + 1) { + if (((k % 8) == 0) && (k != 0)) { + printf ("\n\t"); + } + printf (" 0x%x", buf[k]); + } + printf ("\n"); +#endif + return (1); +} + +/* + * Write the serial EEPROM and return 1 if successful and 0 if + * not successful. + */ +int +ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf, + u_int start_addr, u_int count) +{ + uint16_t v; + uint8_t temp; + int i, k; + + /* Place the chip into write-enable mode */ + send_seeprom_cmd(sd, &seeprom_ewen); + reset_seeprom(sd); + + /* Write all requested data out to the seeprom. */ + temp = sd->sd_MS ^ sd->sd_CS; + for (k = start_addr; k < count + start_addr; k++) { + /* Send the write command */ + send_seeprom_cmd(sd, &seeprom_write); + + /* Send the 6 or 8 bit address (MSB first). */ + for (i = (sd->sd_chip - 1); i >= 0; i--) { + if ((k & (1 << i)) != 0) + temp ^= sd->sd_DO; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + if ((k & (1 << i)) != 0) + temp ^= sd->sd_DO; + } + + /* Write the 16 bit value, MSB first */ + v = buf[k - start_addr]; + for (i = 15; i >= 0; i--) { + if ((v & (1 << i)) != 0) + temp ^= sd->sd_DO; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + if ((v & (1 << i)) != 0) + temp ^= sd->sd_DO; + } + + /* Wait for the chip to complete the write */ + temp = sd->sd_MS; + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + temp = sd->sd_MS ^ sd->sd_CS; + do { + SEEPROM_OUTB(sd, temp); + CLOCK_PULSE(sd, sd->sd_RDY); + SEEPROM_OUTB(sd, temp ^ sd->sd_CK); + CLOCK_PULSE(sd, sd->sd_RDY); + } while ((SEEPROM_DATA_INB(sd) & sd->sd_DI) == 0); + + reset_seeprom(sd); + } + + /* Put the chip back into write-protect mode */ + send_seeprom_cmd(sd, &seeprom_ewds); + reset_seeprom(sd); + + return (1); +} + +int +ahc_verify_cksum(struct seeprom_config *sc) +{ + int i; + int maxaddr; + uint32_t checksum; + uint16_t *scarray; + + maxaddr = (sizeof(*sc)/2) - 1; + checksum = 0; + scarray = (uint16_t *)sc; + + for (i = 0; i < maxaddr; i++) + checksum = checksum + scarray[i]; + if (checksum == 0 + || (checksum & 0xFFFF) != sc->checksum) { + return (0); + } else { + return(1); + } +} |